2 # Makefile to build perl on Windows NT using Microsoft NMAKE.
4 # Visual C++ 2.0 through 6.0 (and possibly newer versions)
5 # MS Platform SDK 64-bit compiler and tools **experimental**
7 # This is set up to build a perl.exe that runs off a shared library
8 # (perl59.dll). Also makes individual DLLs for the XS extensions.
12 ## Make sure you read README.win32 *before* you mess with anything here!
16 ## Build configuration. Edit the values below to suit your needs.
20 # Set these to wherever you want "nmake install" to put your
24 INST_TOP = $(INST_DRV)\perl
27 # Comment this out if you DON'T want your perl installation to be versioned.
28 # This means that the new installation will overwrite any files from the
29 # old installation at the same INST_TOP location. Leaving it enabled is
30 # the safest route, as perl adds the extra version directory to all the
31 # locations it installs files to. If you disable it, an alternative
32 # versioned installation can be obtained by setting INST_TOP above to a
33 # path that includes an arbitrary version string.
38 # Comment this out if you DON'T want your perl installation to have
39 # architecture specific components. This means that architecture-
40 # specific files will be installed along with the architecture-neutral
41 # files. Leaving it enabled is safer and more flexible, in case you
42 # want to build multiple flavors of perl and install them together in
43 # the same location. Commenting it out gives you a simpler
44 # installation that is easier to understand for beginners.
46 #INST_ARCH = \$(ARCHNAME)
49 # Uncomment this if you want perl to run
50 # $Config{sitelibexp}\sitecustomize.pl
51 # before anything else. This script can then be set up, for example,
52 # to add additional entries to @INC.
54 #USE_SITECUST = define
57 # uncomment to enable multiple interpreters. This is need for fork()
58 # emulation and for thread support.
63 # Beginnings of interpreter cloning/threads; now reasonably complete.
64 # This should be enabled to get the fork() emulation. This needs
70 # uncomment to enable the implicit "host" layer for all system calls
71 # made by perl. This needs USE_MULTI above. This is also needed to
77 # Comment out next assign to disable perl's I/O subsystem and use compiler's
78 # stdio for IO - depending on your compiler vendor and run time library you may
79 # then get a number of fails from make test i.e. bugs - complain to them not us ;-).
80 # You will also be unable to take full advantage of perl5.8's support for multiple
81 # encodings and may see lower IO performance. You have been warned.
85 # Comment this out if you don't want to enable large file support for
86 # some reason. Should normally only be changed to maintain compatibility
87 # with an older release of perl.
88 USE_LARGE_FILES = define
91 # uncomment one of the following lines if you are using either
92 # Visual C++ 2.x or Visual C++ 6.x (aka Visual Studio 98)
98 # uncomment next line if you want debug version of perl (big,slow)
99 # If not enabled, we automatically try to use maximum optimization
100 # with all compilers that are known to have a working optimizer.
105 # uncomment to enable use of PerlCRT.DLL when using the Visual C compiler.
106 # It has patches that fix known bugs in older versions of MSVCRT.DLL.
107 # This currently requires VC 5.0 with Service Pack 3 or later.
108 # Get it from CPAN at http://www.cpan.org/authors/id/D/DO/DOUGL/
109 # and follow the directions in the package to install.
111 # Not recommended if you have VC 6.x and you're not running Windows 9x.
113 #USE_PERLCRT = define
116 # uncomment to enable linking with setargv.obj under the Visual C
117 # compiler. Setting this options enables perl to expand wildcards in
118 # arguments, but it may be harder to use alternate methods like
119 # File::DosGlob that are more powerful. This option is supported only with
122 #USE_SETARGV = define
125 # if you want to have the crypt() builtin function implemented, leave this or
126 # CRYPT_LIB uncommented. The fcrypt.c file named here contains a suitable
127 # version of des_fcrypt().
132 # if you didn't set CRYPT_SRC and if you have des_fcrypt() available in a
133 # library, uncomment this, and make sure the library exists (see README.win32)
134 # Specify the full pathname of the library.
136 #CRYPT_LIB = fcrypt.lib
139 # set this if you wish to use perl's malloc
140 # WARNING: Turning this on/off WILL break binary compatibility with extensions
141 # you may have compiled with/without it. Be prepared to recompile all
142 # extensions if you change the default. Currently, this cannot be enabled
143 # if you ask for USE_IMP_SYS above.
145 #PERL_MALLOC = define
148 # set this to enable debugging mstats
149 # This must be enabled to use the Devel::Peek::mstat() function. This cannot
150 # be enabled without PERL_MALLOC as well.
152 #DEBUG_MSTATS = define
156 # set the install locations of the compiler include/libraries
157 # Running VCVARS32.BAT is *required* when using Visual C.
158 # Some versions of Visual C don't define MSVCDIR in the environment,
159 # so you may have to set CCHOME explicitly (spaces in the path name should
164 CCINCDIR = $(CCHOME)\include
165 CCLIBDIR = $(CCHOME)\lib
168 # Additional compiler flags can be specified here.
170 BUILDOPT = $(BUILDOPTEXTRA)
173 # Adding -DPERL_HASH_SEED_EXPLICIT will disable randomization of Perl's
174 # internal hash function unless the PERL_HASH_SEED environment variable is set.
175 # Alternatively, adding -DNO_HASH_SEED will completely disable the
176 # randomization feature.
177 # The latter is required to maintain binary compatibility with Perl 5.8.0.
179 #BUILDOPT = $(BUILDOPT) -DPERL_HASH_SEED_EXPLICIT
180 #BUILDOPT = $(BUILDOPT) -DNO_HASH_SEED
183 # This should normally be disabled. Adding -DPERL_POLLUTE enables support
184 # for old symbols by default, at the expense of extreme pollution. You most
185 # probably just want to build modules that won't compile with
186 # perl Makefile.PL POLLUTE=1
187 # instead of enabling this. Please report such modules to the respective
190 #BUILDOPT = $(BUILDOPT) -DPERL_POLLUTE
193 # This should normally be disabled. Enabling it will disable the File::Glob
194 # implementation of CORE::glob.
196 #BUILDOPT = $(BUILDOPT) -DPERL_EXTERNAL_GLOB
199 # This should normally be disabled. Enabling it causes perl to read scripts
200 # in text mode (which is the 5.005 behavior) and will break ByteLoader.
202 #BUILDOPT = $(BUILDOPT) -DPERL_TEXTMODE_SCRIPTS
205 # specify semicolon-separated list of extra directories that modules will
206 # look for libraries (spaces in path names need not be quoted)
211 # set this to your email address (perl will guess a value from
212 # from your loginname and your hostname, which may not be right)
217 ## Build configuration ends.
220 ##################### CHANGE THESE ONLY IF YOU MUST #####################
222 !IF "$(CRYPT_SRC)$(CRYPT_LIB)" == ""
226 CRYPT_FLAG = -DHAVE_DES_FCRYPT
229 !IF "$(USE_IMP_SYS)" == "define"
234 !IF "$(PERL_MALLOC)" == ""
239 !IF "$(DEBUG_MSTATS)" == ""
243 !IF "$(DEBUG_MSTATS)" == "define"
244 BUILDOPT = $(BUILDOPT) -DPERL_DEBUGGING_MSTATS
247 !IF "$(USE_SITECUST)" == ""
251 !IF "$(USE_MULTI)" == ""
255 !IF "$(USE_ITHREADS)" == ""
259 !IF "$(USE_IMP_SYS)" == ""
263 !IF "$(USE_PERLIO)" == ""
267 !IF "$(USE_LARGE_FILES)" == ""
268 USE_LARGE_FILES = undef
271 !IF "$(USE_PERLCRT)" == ""
275 !IF "$(USE_IMP_SYS)$(USE_MULTI)" == "defineundef"
279 !IF "$(USE_ITHREADS)$(USE_MULTI)" == "defineundef"
283 !IF "$(USE_SITECUST)" == "define"
284 BUILDOPT = $(BUILDOPT) -DUSE_SITECUSTOMIZE
287 !IF "$(USE_MULTI)" != "undef"
288 BUILDOPT = $(BUILDOPT) -DPERL_IMPLICIT_CONTEXT
291 !IF "$(USE_IMP_SYS)" != "undef"
292 BUILDOPT = $(BUILDOPT) -DPERL_IMPLICIT_SYS
295 !IF "$(PROCESSOR_ARCHITECTURE)" == ""
296 PROCESSOR_ARCHITECTURE = x86
300 !IF "$(PROCESSOR_ARCHITEW6432)" != ""
301 PROCESSOR_ARCHITECTURE = $(PROCESSOR_ARCHITEW6432)
304 !IF "$(PROCESSOR_ARCHITECTURE)" == "IA64"
312 !IF "$(USE_MULTI)" == "define"
313 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-multi
315 !IF "$(USE_PERLIO)" == "define"
316 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-perlio
318 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)
322 !IF "$(USE_PERLIO)" == "define"
323 BUILDOPT = $(BUILDOPT) -DUSE_PERLIO
326 !IF "$(USE_ITHREADS)" == "define"
327 ARCHNAME = $(ARCHNAME)-thread
330 # Visual Studio 98 specific
331 !IF "$(CCTYPE)" == "MSVC60"
333 # VC 6.0 can load the socket dll on demand. Makes the test suite
334 # run in about 10% less time.
335 DELAYLOAD = -DELAYLOAD:ws2_32.dll -DELAYLOAD:shell32.dll delayimp.lib
338 ARCHDIR = ..\lib\$(ARCHNAME)
339 COREDIR = ..\lib\CORE
340 AUTODIR = ..\lib\auto
344 EXTUTILSDIR = $(LIBDIR)\ExtUtils
347 INST_SCRIPT = $(INST_TOP)$(INST_VER)\bin
348 INST_BIN = $(INST_SCRIPT)$(INST_ARCH)
349 INST_LIB = $(INST_TOP)$(INST_VER)\lib
350 INST_ARCHLIB = $(INST_LIB)$(INST_ARCH)
351 INST_COREDIR = $(INST_ARCHLIB)\CORE
352 INST_POD = $(INST_LIB)\pod
353 INST_HTML = $(INST_TOP)$(INST_VER)\html
356 # Programs to compile, build .lib files and link
361 LIB32 = $(LINK32) -lib
368 INCLUDES = -I$(COREDIR) -I.\include -I. -I..
369 #PCHFLAGS = -Fpc:\temp\vcmoduls.pch -YX
370 DEFINES = -DWIN32 -D_CONSOLE -DNO_STRICT $(CRYPT_FLAG)
371 LOCDEFS = -DPERLDLL -DPERL_CORE
375 !IF "$(USE_PERLCRT)" != "define"
381 !IF "$(CFG)" == "Debug"
382 ! IF "$(CCTYPE)" == "MSVC20"
383 OPTIMIZE = -Od -MD -Z7 -DDEBUGGING
385 OPTIMIZE = -Od -MD -Zi -DDEBUGGING
389 OPTIMIZE = -MD -Zi -DNDEBUG
390 # we enable debug symbols in release builds also
391 LINK_DBG = -debug -opt:ref,icf
392 # you may want to enable this if you want COFF symbols in the executables
393 # in addition to the PDB symbols. The default Dr. Watson that ships with
394 # Windows can use the the former but not latter. The free WinDbg can be
395 # installed to get better stack traces from just the PDB symbols, so we
396 # avoid the bloat of COFF symbols by default.
397 #LINK_DBG = $(LINK_DBG) -debugtype:both
398 ! IF "$(WIN64)" == "define"
399 # enable Whole Program Optimizations (WPO) and Link Time Code Generation (LTCG)
400 OPTIMIZE = $(OPTIMIZE) -Ox -GL
401 LINK_DBG = $(LINK_DBG) -ltcg
403 # -O1 yields smaller code, which turns out to be faster than -O2 on x86
404 OPTIMIZE = $(OPTIMIZE) -O1
405 #OPTIMIZE = $(OPTIMIZE) -O2
409 !IF "$(WIN64)" == "define"
410 DEFINES = $(DEFINES) -DWIN64 -DCONSERVATIVE
411 OPTIMIZE = $(OPTIMIZE) -Wp64 -Op
414 !IF "$(USE_PERLCRT)" != "define"
415 BUILDOPT = $(BUILDOPT) -DPERL_MSVCRT_READFIX
418 LIBBASEFILES = $(CRYPT_LIB) \
419 oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \
420 comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \
421 netapi32.lib uuid.lib ws2_32.lib mpr.lib winmm.lib \
424 # win64 doesn't have some libs
425 !IF "$(WIN64)" != "define"
426 LIBBASEFILES = $(LIBBASEFILES) odbc32.lib odbccp32.lib
429 # we add LIBC here, since we may be using PerlCRT.dll
430 LIBFILES = $(LIBBASEFILES) $(LIBC)
432 CFLAGS = -nologo -Gf -W3 $(INCLUDES) $(DEFINES) $(LOCDEFS) \
433 $(PCHFLAGS) $(OPTIMIZE)
434 LINK_FLAGS = -nologo -nodefaultlib $(LINK_DBG) \
435 -libpath:"$(INST_COREDIR)" \
436 -machine:$(PROCESSOR_ARCHITECTURE)
440 CFLAGS_O = $(CFLAGS) $(BUILDOPT)
442 #################### do not edit below this line #######################
443 ############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ##############
451 .SUFFIXES : .c $(o) .dll .lib .exe .rc .res
454 $(CC) -c -I$(<D) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $<
460 $(LINK32) -dll -subsystem:windows -implib:$(*B).lib -def:$(*B).def \
461 -out:$@ $(LINK_FLAGS) $(LIBFILES) $< $(LIBPERL)
469 # makedef.pl must be updated if this changes, and this should normally
470 # only change when there is an incompatible revision of the public API.
471 PERLIMPLIB = ..\perl59.lib
472 PERLDLL = ..\perl59.dll
474 MINIPERL = ..\miniperl.exe
476 PERLEXE = ..\perl.exe
477 WPERLEXE = ..\wperl.exe
478 GLOBEXE = ..\perlglob.exe
479 CONFIGPM = ..\lib\Config.pm ..\lib\Config_heavy.pl
480 MINIMOD = ..\lib\ExtUtils\Miniperl.pm
483 # Unicode data files generated by mktables
484 UNIDATAFILES = ..\lib\unicore\Canonical.pl ..\lib\unicore\Exact.pl \
485 ..\lib\unicore\Properties ..\lib\unicore\Decomposition.pl \
486 ..\lib\unicore\CombiningClass.pl ..\lib\unicore\Name.pl \
487 ..\lib\unicore\PVA.pl
489 # Directories of Unicode data files generated by mktables
490 UNIDATADIR1 = ..\lib\unicore\To
491 UNIDATADIR2 = ..\lib\unicore\lib
493 PERLEXE_ICO = .\perlexe.ico
494 PERLEXE_RES = .\perlexe.res
497 # Nominate a target which causes extensions to be re-built
498 # This used to be $(PERLEXE), but at worst it is the .dll that they depend
499 # on and really only the interface - i.e. the .def file used to export symbols
501 PERLDEP = perldll.def
503 PL2BAT = bin\pl2bat.pl
504 GLOBBAT = bin\perlglob.bat
546 !IF "$(WIN64)" == "define"
547 CFGSH_TMPL = config.vc64
548 CFGH_TMPL = config_H.vc64
550 CFGSH_TMPL = config.vc
551 CFGH_TMPL = config_H.vc
554 XCOPY = xcopy /f /r /i /d
555 RCOPY = xcopy /f /r /i /e /d
562 # filenames given to xsubpp must have forward slashes (since it puts
563 # full pathnames in #line strings)
564 XSUBPP = ..\$(MINIPERL) -I..\..\lib ..\$(EXTUTILSDIR)\xsubpp \
603 EXTRACORE_SRC = $(EXTRACORE_SRC) perllib.c
605 !IF "$(PERL_MALLOC)" == "define"
606 EXTRACORE_SRC = $(EXTRACORE_SRC) ..\malloc.c
609 EXTRACORE_SRC = $(EXTRACORE_SRC) ..\perlio.c
616 # We need this for miniperl build unless we override canned
617 # config.h #define building mini\*
618 #!IF "$(USE_PERLIO)" == "define"
619 WIN32_SRC = $(WIN32_SRC) .\win32io.c
622 !IF "$(CRYPT_SRC)" != ""
623 WIN32_SRC = $(WIN32_SRC) .\$(CRYPT_SRC)
626 DLL_SRC = $(DYNALOADER).c
673 .\include\sys\socket.h \
676 CORE_H = $(CORE_NOCFG_H) .\config.h
678 MICROCORE_OBJ = $(MICROCORE_SRC:.c=.obj)
679 CORE_OBJ = $(MICROCORE_OBJ) $(EXTRACORE_SRC:.c=.obj)
680 WIN32_OBJ = $(WIN32_SRC:.c=.obj)
681 MINICORE_OBJ = $(MICROCORE_OBJ:..\=.\mini\) \
682 $(MINIDIR)\miniperlmain$(o) \
683 $(MINIDIR)\perlio$(o)
684 MINIWIN32_OBJ = $(WIN32_OBJ:.\=.\mini\)
685 MINI_OBJ = $(MINICORE_OBJ) $(MINIWIN32_OBJ)
686 DLL_OBJ = $(DLL_SRC:.c=.obj)
687 X2P_OBJ = $(X2P_SRC:.c=.obj)
689 PERLDLL_OBJ = $(CORE_OBJ)
690 PERLEXE_OBJ = perlmain$(o)
692 PERLDLL_OBJ = $(PERLDLL_OBJ) $(WIN32_OBJ) $(DLL_OBJ)
693 #PERLEXE_OBJ = $(PERLEXE_OBJ) $(WIN32_OBJ) $(DLL_OBJ)
695 !IF "$(USE_SETARGV)" != ""
696 SETARGV_OBJ = setargv$(o)
699 # specify static extensions here
700 #STATIC_EXT = Cwd Compress/Zlib
703 DYNALOADER = $(EXTDIR)\DynaLoader\DynaLoader
704 SOCKET = $(EXTDIR)\Socket\Socket
705 FCNTL = $(EXTDIR)\Fcntl\Fcntl
706 OPCODE = $(EXTDIR)\Opcode\Opcode
707 SDBM_FILE = $(EXTDIR)\SDBM_File\SDBM_File
709 POSIX = $(EXTDIR)\POSIX\POSIX
710 ATTRS = $(EXTDIR)\attrs\attrs
711 THREAD = $(EXTDIR)\Thread\Thread
714 DUMPER = $(EXTDIR)\Data\Dumper\Dumper
715 ERRNO = $(EXTDIR)\Errno\Errno
716 PEEK = $(EXTDIR)\Devel\Peek\Peek
717 BYTELOADER = $(EXTDIR)\ByteLoader\ByteLoader
718 DPROF = $(EXTDIR)\Devel\DProf\DProf
719 GLOB = $(EXTDIR)\File\Glob\Glob
720 HOSTNAME = $(EXTDIR)\Sys\Hostname\Hostname
721 STORABLE = $(EXTDIR)\Storable\Storable
722 FILTER = $(EXTDIR)\Filter\Util\Call\Call
723 ENCODE = $(EXTDIR)\Encode\Encode
724 MD5 = $(EXTDIR)\Digest\MD5\MD5
725 PERLIOSCALAR = $(EXTDIR)\PerlIO\scalar\scalar
726 MIMEBASE64 = $(EXTDIR)\MIME\Base64\Base64
727 TIMEHIRES = $(EXTDIR)\Time\HiRes\HiRes
728 CWD = $(EXTDIR)\Cwd\Cwd
729 LISTUTIL = $(EXTDIR)\List\Util\Util
730 PERLIOVIA = $(EXTDIR)\PerlIO\via\via
731 XSAPITEST = $(EXTDIR)\XS\APItest\APItest
732 XSTYPEMAP = $(EXTDIR)\XS\Typemap\Typemap
733 UNICODENORMALIZE = $(EXTDIR)\Unicode\Normalize\Normalize
734 MATHBIGINTFASTCALC = $(EXTDIR)\Math\BigInt\FastCalc\FastCalc
735 COMPRESSZLIB = $(EXTDIR)\Compress\Zlib\Zlib
736 WIN32_DIR = ext\Win32
738 SOCKET_DLL = $(AUTODIR)\Socket\Socket.dll
739 FCNTL_DLL = $(AUTODIR)\Fcntl\Fcntl.dll
740 OPCODE_DLL = $(AUTODIR)\Opcode\Opcode.dll
741 SDBM_FILE_DLL = $(AUTODIR)\SDBM_File\SDBM_File.dll
742 IO_DLL = $(AUTODIR)\IO\IO.dll
743 POSIX_DLL = $(AUTODIR)\POSIX\POSIX.dll
744 ATTRS_DLL = $(AUTODIR)\attrs\attrs.dll
745 THREAD_DLL = $(AUTODIR)\Thread\Thread.dll
746 B_DLL = $(AUTODIR)\B\B.dll
747 DUMPER_DLL = $(AUTODIR)\Data\Dumper\Dumper.dll
748 PEEK_DLL = $(AUTODIR)\Devel\Peek\Peek.dll
749 RE_DLL = $(AUTODIR)\re\re.dll
750 BYTELOADER_DLL = $(AUTODIR)\ByteLoader\ByteLoader.dll
751 DPROF_DLL = $(AUTODIR)\Devel\DProf\DProf.dll
752 GLOB_DLL = $(AUTODIR)\File\Glob\Glob.dll
753 HOSTNAME_DLL = $(AUTODIR)\Sys\Hostname\Hostname.dll
754 STORABLE_DLL = $(AUTODIR)\Storable\Storable.dll
755 FILTER_DLL = $(AUTODIR)\Filter\Util\Call\Call.dll
756 ENCODE_DLL = $(AUTODIR)\Encode\Encode.dll
757 MD5_DLL = $(AUTODIR)\Digest\MD5\MD5.dll
758 PERLIOSCALAR_DLL = $(AUTODIR)\PerlIO\scalar\scalar.dll
759 MIMEBASE64_DLL = $(AUTODIR)\MIME\Base64\Base64.dll
760 TIMEHIRES_DLL = $(AUTODIR)\Time\HiRes\HiRes.dll
761 CWD_DLL = $(AUTODIR)\Cwd\Cwd.dll
762 LISTUTIL_DLL = $(AUTODIR)\List\Util\Util.dll
763 PERLIOVIA_DLL = $(AUTODIR)\PerlIO\via\via.dll
764 XSAPITEST_DLL = $(AUTODIR)\XS\APItest\APItest.dll
765 XSTYPEMAP_DLL = $(AUTODIR)\XS\Typemap\Typemap.dll
766 UNICODENORMALIZE_DLL = $(AUTODIR)\Unicode\Normalize\Normalize.dll
767 MATHBIGINTFASTCALC_DLL = $(AUTODIR)\Math\BigInt\FastCalc\FastCalc.dll
768 COMPRESSZLIB_DLL = $(AUTODIR)\Compress\Zlib\Zlib.dll
769 WIN32_DLL = $(AUTODIR)\Win32\Win32.dll
800 $(UNICODENORMALIZE).c \
801 $(MATHBIGINTFASTCALC).c \
826 $(PERLIOSCALAR_DLL) \
834 $(UNICODENORMALIZE_DLL) \
835 $(MATHBIGINTFASTCALC_DLL) \
836 $(COMPRESSZLIB_DLL) \
839 POD2HTML = $(PODDIR)\pod2html
840 POD2MAN = $(PODDIR)\pod2man
841 POD2LATEX = $(PODDIR)\pod2latex
842 POD2TEXT = $(PODDIR)\pod2text
845 "INST_DRV=$(INST_DRV)" \
846 "INST_TOP=$(INST_TOP)" \
847 "INST_VER=$(INST_VER)" \
848 "INST_ARCH=$(INST_ARCH)" \
849 "archname=$(ARCHNAME)" \
852 "ccflags=-nologo -Gf -W3 $(OPTIMIZE:"=\") $(DEFINES) $(BUILDOPT)" \
853 "cf_email=$(EMAIL)" \
854 "d_crypt=$(D_CRYPT)" \
855 "d_mymalloc=$(PERL_MALLOC)" \
857 "incpath=$(CCINCDIR:"=\")" \
858 "libperl=$(PERLIMPLIB:..\=)" \
859 "libpth=$(CCLIBDIR:"=\");$(EXTRALIBDIRS:"=\")" \
861 "make=$(MAKE_BARE)" \
862 "static_ext=$(STATIC_EXT)" \
863 "usethreads=$(USE_ITHREADS)" \
864 "useithreads=$(USE_ITHREADS)" \
865 "usemultiplicity=$(USE_MULTI)" \
866 "useperlio=$(USE_PERLIO)" \
867 "uselargefiles=$(USE_LARGE_FILES)" \
868 "usesitecustomize=$(USE_SITECUST)" \
869 "LINK_FLAGS=$(LINK_FLAGS:"=\")" \
870 "optimize=$(OPTIMIZE:"=\")"
876 all : .\config.h $(GLOBEXE) $(MINIMOD) $(CONFIGPM) $(UNIDATAFILES) $(PERLEXE) \
878 @echo Everything is up to date. '$(MAKE_BARE) test' to run test suite.
880 $(DYNALOADER)$(o) : $(DYNALOADER).c $(CORE_H) $(EXTDIR)\DynaLoader\dlutils.c
882 #------------------------------------------------------------
884 $(GLOBEXE) : perlglob$(o)
885 $(LINK32) $(LINK_FLAGS) $(LIBFILES) -out:$@ -subsystem:$(SUBSYS) \
886 perlglob$(o) setargv$(o)
888 perlglob$(o) : perlglob.c
890 config.w32 : $(CFGSH_TMPL)
891 copy $(CFGSH_TMPL) config.w32
893 .\config.h : $(CFGH_TMPL)
895 copy $(CFGH_TMPL) config.h
897 ..\config.sh : config.w32 $(MINIPERL) config_sh.PL
898 $(MINIPERL) -I..\lib config_sh.PL $(CFG_VARS) config.w32 > ..\config.sh
900 # this target is for when changes to the main config.sh happen
901 # edit config.{b,v,g}c and make this target once for each supported
902 # compiler (e.g. `nmake CCTYPE=BORLAND regen_config_h`)
904 perl config_sh.PL $(CFG_VARS) $(CFGSH_TMPL) > ..\config.sh
906 -del /f perl.exe perl*.dll
911 -perl config_h.PL "INST_VER=$(INST_VER)"
912 rename config.h $(CFGH_TMPL)
914 $(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl
918 if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL)
919 $(XCOPY) ..\*.h $(COREDIR)\*.*
920 $(XCOPY) *.h $(COREDIR)\*.*
921 $(XCOPY) ..\ext\re\re.pm $(LIBDIR)\*.*
922 $(RCOPY) include $(COREDIR)\*.*
923 -$(MINIPERL) -I..\lib config_h.PL "INST_VER=$(INST_VER)"
924 if errorlevel 1 $(MAKE) /$(MAKEFLAGS) $(CONFIGPM)
926 $(MINIPERL) : $(MINIDIR) $(MINI_OBJ)
927 $(LINK32) -subsystem:console -out:$@ @<<
928 $(LINK_FLAGS) $(LIBFILES) $(MINI_OBJ)
932 if not exist "$(MINIDIR)" mkdir "$(MINIDIR)"
934 $(MINICORE_OBJ) : $(CORE_NOCFG_H)
935 $(CC) -c $(CFLAGS) -DPERL_EXTERNAL_GLOB $(OBJOUT_FLAG)$@ ..\$(*F).c
937 $(MINIWIN32_OBJ) : $(CORE_NOCFG_H)
938 $(CC) -c $(CFLAGS) $(OBJOUT_FLAG)$@ $(*F).c
940 # -DPERL_IMPLICIT_SYS needs C++ for perllib.c
941 # This is the only file that depends on perlhost.h, vmem.h, and vdir.h
942 !IF "$(USE_IMP_SYS)" == "define"
943 perllib$(o) : perllib.c .\perlhost.h .\vdir.h .\vmem.h
944 $(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c
947 # 1. we don't want to rebuild miniperl.exe when config.h changes
948 # 2. we don't want to rebuild miniperl.exe with non-default config.h
949 $(MINI_OBJ) : $(CORE_NOCFG_H)
951 $(WIN32_OBJ) : $(CORE_H)
952 $(CORE_OBJ) : $(CORE_H)
953 $(DLL_OBJ) : $(CORE_H)
954 $(X2P_OBJ) : $(CORE_H)
956 perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym ..\pp.sym ..\makedef.pl
957 $(MINIPERL) -I..\lib buildext.pl --create-perllibst-h
958 $(MINIPERL) -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) $(BUILDOPT) \
959 CCTYPE=$(CCTYPE) > perldll.def
961 $(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES) Extensions_static
962 $(LINK32) -dll -def:perldll.def -base:0x28000000 -out:$@ @Extensions_static @<<
963 $(LINK_FLAGS) $(DELAYLOAD) $(LIBFILES) $(PERLDLL_OBJ) $(PERLDLL_RES)
965 $(XCOPY) $(PERLIMPLIB) $(COREDIR)
967 $(PERLEXE_ICO): $(MINIPERL) makeico.pl
968 $(MINIPERL) makeico.pl > $@
970 $(PERLEXE_RES): perlexe.rc $(PERLEXE_ICO)
972 $(MINIMOD) : $(MINIPERL) ..\minimod.pl
974 miniperl minimod.pl > lib\ExtUtils\Miniperl.pm
977 ..\x2p\a2p$(o) : ..\x2p\a2p.c
978 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\a2p.c
980 ..\x2p\hash$(o) : ..\x2p\hash.c
981 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\hash.c
983 ..\x2p\str$(o) : ..\x2p\str.c
984 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\str.c
986 ..\x2p\util$(o) : ..\x2p\util.c
987 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\util.c
989 ..\x2p\walk$(o) : ..\x2p\walk.c
990 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\walk.c
992 $(X2P) : $(MINIPERL) $(X2P_OBJ)
993 $(MINIPERL) ..\x2p\find2perl.PL
994 $(MINIPERL) ..\x2p\s2p.PL
995 $(LINK32) -subsystem:console -out:$@ @<<
996 $(LINK_FLAGS) $(LIBFILES) $(X2P_OBJ)
999 perlmain.c : runperl.c
1000 copy runperl.c perlmain.c
1002 perlmain$(o) : perlmain.c
1003 $(CC) $(CFLAGS_O) -UPERLDLL $(OBJOUT_FLAG)$@ -c perlmain.c
1005 $(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES)
1006 $(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(LINK_FLAGS) \
1007 $(LIBFILES) $(PERLEXE_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB) $(PERLEXE_RES)
1008 copy $(PERLEXE) $(WPERLEXE)
1009 $(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS
1010 copy splittree.pl ..
1011 $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
1013 $(DYNALOADER).c: $(MINIPERL) $(EXTDIR)\DynaLoader\dl_win32.xs $(CONFIGPM)
1014 if not exist $(AUTODIR) mkdir $(AUTODIR)
1016 ..\$(MINIPERL) -I..\..\lib $(*B)_pm.PL
1017 ..\$(MINIPERL) -I..\..\lib XSLoader_pm.PL
1019 $(XCOPY) $(EXTDIR)\$(*B)\$(*B).pm $(LIBDIR)\$(NULL)
1020 $(XCOPY) $(EXTDIR)\$(*B)\XSLoader.pm $(LIBDIR)\$(NULL)
1022 $(XSUBPP) dl_win32.xs > $(*B).c
1025 $(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs
1026 copy dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs
1028 #-------------------------------------------------------------------------------
1029 Extensions: buildext.pl $(PERLDEP) $(CONFIGPM)
1030 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) --dynamic
1031 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext --dynamic
1033 Extensions_static : buildext.pl
1034 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) --static
1035 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext --static
1036 $(MINIPERL) -I..\lib buildext.pl --list-static-libs > Extensions_static
1039 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) clean
1040 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext clean
1042 Extensions_realclean:
1043 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) realclean
1044 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext realclean
1046 #-------------------------------------------------------------------------------
1049 $(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=./html \
1050 --podpath=pod:lib:ext:utils --htmlroot="file://$(INST_HTML::=|)" \
1051 --libpod=perlfunc:perlguts:perlvar:perlrun:perlop --recurse
1053 # Note that this next section is parsed (and regenerated) by pod/buildtoc
1054 # so please check that script before making structural changes here
1056 utils: $(PERLEXE) $(X2P)
1058 $(MAKE) PERL=$(MINIPERL)
1060 copy ..\vms\perlvms.pod .\perlvms.pod
1061 copy ..\README.aix ..\pod\perlaix.pod
1062 copy ..\README.amiga ..\pod\perlamiga.pod
1063 copy ..\README.apollo ..\pod\perlapollo.pod
1064 copy ..\README.beos ..\pod\perlbeos.pod
1065 copy ..\README.bs2000 ..\pod\perlbs2000.pod
1066 copy ..\README.ce ..\pod\perlce.pod
1067 copy ..\README.cn ..\pod\perlcn.pod
1068 copy ..\README.cygwin ..\pod\perlcygwin.pod
1069 copy ..\README.dgux ..\pod\perldgux.pod
1070 copy ..\README.dos ..\pod\perldos.pod
1071 copy ..\README.epoc ..\pod\perlepoc.pod
1072 copy ..\README.freebsd ..\pod\perlfreebsd.pod
1073 copy ..\README.hpux ..\pod\perlhpux.pod
1074 copy ..\README.hurd ..\pod\perlhurd.pod
1075 copy ..\README.irix ..\pod\perlirix.pod
1076 copy ..\README.jp ..\pod\perljp.pod
1077 copy ..\README.ko ..\pod\perlko.pod
1078 copy ..\README.machten ..\pod\perlmachten.pod
1079 copy ..\README.macos ..\pod\perlmacos.pod
1080 copy ..\README.macosx ..\pod\perlmacosx.pod
1081 copy ..\README.mint ..\pod\perlmint.pod
1082 copy ..\README.mpeix ..\pod\perlmpeix.pod
1083 copy ..\README.netware ..\pod\perlnetware.pod
1084 copy ..\README.openbsd ..\pod\perlopenbsd.pod
1085 copy ..\README.os2 ..\pod\perlos2.pod
1086 copy ..\README.os390 ..\pod\perlos390.pod
1087 copy ..\README.os400 ..\pod\perlos400.pod
1088 copy ..\README.plan9 ..\pod\perlplan9.pod
1089 copy ..\README.qnx ..\pod\perlqnx.pod
1090 copy ..\README.solaris ..\pod\perlsolaris.pod
1091 copy ..\README.symbian ..\pod\perlsymbian.pod
1092 copy ..\README.tru64 ..\pod\perltru64.pod
1093 copy ..\README.tw ..\pod\perltw.pod
1094 copy ..\README.uts ..\pod\perluts.pod
1095 copy ..\README.vmesa ..\pod\perlvmesa.pod
1096 copy ..\README.vms ..\pod\perlvms.pod
1097 copy ..\README.vos ..\pod\perlvos.pod
1098 copy ..\README.win32 ..\pod\perlwin32.pod
1099 copy ..\pod\perl593delta.pod ..\pod\perldelta.pod
1100 $(MAKE) -f ..\win32\pod.mak converters
1102 $(PERLEXE) lib_pm.PL
1104 $(PERLEXE) $(PL2BAT) $(UTILS)
1106 # Note that the pod cleanup in this next section is parsed (and regenerated
1107 # by pod/buildtoc so please check that script before making changes here
1109 # the doubled rmdir calls are needed because older cmd shells
1110 # don't understand /q
1111 distclean: realclean
1112 -del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \
1113 $(PERLIMPLIB) ..\miniperl.lib $(MINIMOD)
1115 -del /f $(EXTENSION_DLL)
1116 -del /f $(EXTENSION_C) $(DYNALOADER).c $(ERRNO).pm
1117 -del /f $(EXTDIR)\DynaLoader\dl_win32.xs
1118 -del /f $(EXTDIR)\DynaLoader\DynaLoader.pm
1119 -del /f $(EXTDIR)\DynaLoader\XSLoader.pm
1120 -del /f $(LIBDIR)\Encode.pm $(LIBDIR)\encoding.pm $(LIBDIR)\Errno.pm
1121 -del /f $(LIBDIR)\Config.pod $(LIBDIR)\POSIX.pod $(LIBDIR)\threads.pm
1122 -del /f $(LIBDIR)\.exists $(LIBDIR)\attrs.pm $(LIBDIR)\DynaLoader.pm
1123 -del /f $(LIBDIR)\XSLoader.pm $(LIBDIR)\lib.pm
1124 -del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm
1125 -del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm
1126 -del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm
1127 -del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm
1128 -del /f $(LIBDIR)\ByteLoader.pm
1129 -del /f $(LIBDIR)\Devel\Peek.pm $(LIBDIR)\Devel\DProf.pm
1130 -del /f $(LIBDIR)\Devel\PPPort.pm
1131 -del /f $(LIBDIR)\File\Glob.pm
1132 -del /f $(LIBDIR)\Storable.pm
1133 -del /f $(LIBDIR)\Digest\MD5.pm
1134 -del /f $(LIBDIR)\PerlIO\encoding.pm
1135 -del /f $(LIBDIR)\PerlIO\scalar.pm
1136 -del /f $(LIBDIR)\PerlIO\via.pm
1137 -del /f $(LIBDIR)\Sys\Hostname.pm
1138 -del /f $(LIBDIR)\Thread\Signal.pm $(LIBDIR)\Thread\Specific.pm
1139 -del /f $(LIBDIR)\threads\shared.pm
1140 -del /f $(LIBDIR)\Time\HiRes.pm
1141 -del /f $(LIBDIR)\Unicode\Normalize.pm
1142 -del /f $(LIBDIR)\Math\BigInt\FastCalc.pm
1143 -del /f $(LIBDIR)\Win32.pm
1144 -if exist $(LIBDIR)\IO\Socket rmdir /s /q $(LIBDIR)\IO\Socket
1145 -if exist $(LIBDIR)\IO\Socket rmdir /s $(LIBDIR)\IO\Socket
1146 -if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B
1147 -if exist $(LIBDIR)\B rmdir /s $(LIBDIR)\B
1148 -if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data
1149 -if exist $(LIBDIR)\Data rmdir /s $(LIBDIR)\Data
1150 -if exist $(LIBDIR)\Encode rmdir /s /q $(LIBDIR)\Encode
1151 -if exist $(LIBDIR)\Encode rmdir /s $(LIBDIR)\Encode
1152 -if exist $(LIBDIR)\Filter\Util rmdir /s /q $(LIBDIR)\Filter\Util
1153 -if exist $(LIBDIR)\Filter\Util rmdir /s $(LIBDIR)\Filter\Util
1154 -if exist $(LIBDIR)\MIME rmdir /s /q $(LIBDIR)\MIME
1155 -if exist $(LIBDIR)\MIME rmdir /s $(LIBDIR)\MIME
1156 -if exist $(LIBDIR)\List rmdir /s /q $(LIBDIR)\List
1157 -if exist $(LIBDIR)\List rmdir /s $(LIBDIR)\List
1158 -if exist $(LIBDIR)\Scalar rmdir /s /q $(LIBDIR)\Scalar
1159 -if exist $(LIBDIR)\Scalar rmdir /s $(LIBDIR)\Scalar
1160 -if exist $(LIBDIR)\Sys rmdir /s /q $(LIBDIR)\Sys
1161 -if exist $(LIBDIR)\Sys rmdir /s $(LIBDIR)\Sys
1162 -if exist $(LIBDIR)\threads rmdir /s /q $(LIBDIR)\threads
1163 -if exist $(LIBDIR)\threads rmdir /s $(LIBDIR)\threads
1164 -if exist $(LIBDIR)\XS rmdir /s /q $(LIBDIR)\XS
1165 -if exist $(LIBDIR)\XS rmdir /s $(LIBDIR)\XS
1166 -cd $(PODDIR) && del /f *.html *.bat checkpods \
1167 perlaix.pod perlamiga.pod perlapollo.pod perlbeos.pod \
1168 perlbs2000.pod perlce.pod perlcn.pod perlcygwin.pod \
1169 perldelta.pod perldgux.pod perldos.pod perlepoc.pod \
1170 perlfreebsd.pod perlhpux.pod perlhurd.pod perlirix.pod \
1171 perljp.pod perlko.pod perlmachten.pod perlmacos.pod \
1172 perlmacosx.pod perlmint.pod perlmpeix.pod perlnetware.pod \
1173 perlopenbsd.pod perlos2.pod perlos390.pod perlos400.pod \
1174 perlplan9.pod perlqnx.pod perlsolaris.pod perlsymbian.pod \
1175 perltru64.pod perltw.pod perluts.pod perlvmesa.pod perlvms.pod \
1176 perlvms.pod perlvos.pod perlwin32.pod \
1177 pod2html pod2latex pod2man pod2text pod2usage \
1178 podchecker podselect
1179 -cd ..\utils && del /f h2ph splain perlbug pl2pm c2ph pstruct h2xs \
1180 perldoc perlivp dprofpp perlcc libnetcfg enc2xs piconv cpan *.bat \
1181 xsubpp instmodsh prove corelist
1182 -cd ..\x2p && del /f find2perl s2p psed *.bat
1183 -del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c config.h.new
1186 -del /f $(PERLEXE_ICO) perl.base
1187 -cd .. && del /s *.lib *.map *.pdb *.ilk *.bs *$(o) .exists pm_to_blib
1188 -cd $(EXTDIR) && del /s *.def Makefile Makefile.old
1189 -if exist $(AUTODIR) rmdir /s /q $(AUTODIR)
1190 -if exist $(AUTODIR) rmdir /s $(AUTODIR)
1191 -if exist $(COREDIR) rmdir /s /q $(COREDIR)
1192 -if exist $(COREDIR) rmdir /s $(COREDIR)
1194 install : all installbare installhtml
1197 $(PERLEXE) ..\installperl
1198 if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.*
1199 $(XCOPY) $(GLOBEXE) $(INST_BIN)\*.*
1200 if exist ..\perl*.pdb $(XCOPY) ..\perl*.pdb $(INST_BIN)\*.*
1201 if exist ..\x2p\a2p.pdb $(XCOPY) ..\x2p\a2p.pdb $(INST_BIN)\*.*
1202 $(XCOPY) bin\*.bat $(INST_SCRIPT)\*.*
1205 $(RCOPY) html\*.* $(INST_HTML)\*.*
1207 inst_lib : $(CONFIGPM)
1208 copy splittree.pl ..
1209 $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
1210 $(RCOPY) ..\lib $(INST_LIB)\*.*
1212 $(UNIDATAFILES) : $(MINIPERL) $(CONFIGPM) ..\lib\unicore\mktables
1213 cd ..\lib\unicore && \
1214 ..\$(MINIPERL) -I.. mktables
1216 minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) utils $(UNIDATAFILES)
1217 $(XCOPY) $(MINIPERL) ..\t\$(NULL)
1218 if exist ..\t\perl.exe del /f ..\t\perl.exe
1219 rename ..\t\miniperl.exe perl.exe
1220 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1223 $(MINIPERL) -I..\lib harness base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t
1225 test-prep : all utils
1226 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1227 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1228 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1232 $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
1235 test-notty : test-prep
1236 set PERL_SKIP_TTY_TEST=1
1238 $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
1242 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1243 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1244 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1246 $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
1249 # the doubled rmdir calls are needed because older cmd shells
1250 # don't understand /q
1252 -@$(DEL) miniperlmain$(o)
1253 -@$(DEL) $(MINIPERL)
1254 -@$(DEL) perlglob$(o)
1255 -@$(DEL) perlmain$(o)
1260 -@$(DEL) $(WPERLEXE)
1262 -@$(DEL) $(CORE_OBJ)
1263 -if exist $(MINIDIR) rmdir /s /q $(MINIDIR)
1264 -if exist $(MINIDIR) rmdir /s $(MINIDIR)
1265 -if exist $(UNIDATADIR1) rmdir /s /q $(UNIDATADIR1)
1266 -if exist $(UNIDATADIR1) rmdir /s $(UNIDATADIR1)
1267 -if exist $(UNIDATADIR2) rmdir /s /q $(UNIDATADIR2)
1268 -if exist $(UNIDATADIR2) rmdir /s $(UNIDATADIR2)
1269 -@$(DEL) $(UNIDATAFILES)
1270 -@$(DEL) $(WIN32_OBJ)
1273 -@$(DEL) ..\*$(o) ..\*.lib ..\*.exp *$(o) *.lib *.exp *.res
1274 -@$(DEL) ..\t\*.exe ..\t\*.dll ..\t\*.bat
1275 -@$(DEL) ..\x2p\*.exe ..\x2p\*.bat
1278 -@$(DEL) Extensions_static
1280 clean : Extensions_clean _clean
1282 realclean : Extensions_realclean _clean
1284 # Handy way to run perlbug -ok without having to install and run the
1285 # installed perlbug. We don't re-run the tests here - we trust the user.
1286 # Please *don't* use this unless all tests pass.
1287 # If you want to report test failures, use "nmake nok" instead.
1289 $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)"
1292 $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" -F perl.ok
1295 $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)"
1298 $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" -F perl.nok