2 # Makefile to build perl on Windows NT using Microsoft NMAKE.
4 # Visual C++ 2.0 or later
5 # MS Platform SDK 64-bit compiler and tools
7 # This is set up to build a perl.exe that runs off a shared library
8 # (perl511.dll). Also makes individual DLLs for the XS extensions.
12 ## Make sure you read README.win32 *before* you mess with anything here!
16 ## Build configuration. Edit the values below to suit your needs.
20 # Set these to wherever you want "nmake install" to put your
24 INST_TOP = $(INST_DRV)\perl
27 # Comment this out if you DON'T want your perl installation to be versioned.
28 # This means that the new installation will overwrite any files from the
29 # old installation at the same INST_TOP location. Leaving it enabled is
30 # the safest route, as perl adds the extra version directory to all the
31 # locations it installs files to. If you disable it, an alternative
32 # versioned installation can be obtained by setting INST_TOP above to a
33 # path that includes an arbitrary version string.
38 # Comment this out if you DON'T want your perl installation to have
39 # architecture specific components. This means that architecture-
40 # specific files will be installed along with the architecture-neutral
41 # files. Leaving it enabled is safer and more flexible, in case you
42 # want to build multiple flavors of perl and install them together in
43 # the same location. Commenting it out gives you a simpler
44 # installation that is easier to understand for beginners.
46 #INST_ARCH = \$(ARCHNAME)
49 # Uncomment this if you want perl to run
50 # $Config{sitelibexp}\sitecustomize.pl
51 # before anything else. This script can then be set up, for example,
52 # to add additional entries to @INC.
54 #USE_SITECUST = define
57 # uncomment to enable multiple interpreters. This is need for fork()
58 # emulation and for thread support.
63 # Beginnings of interpreter cloning/threads; now reasonably complete.
64 # This should be enabled to get the fork() emulation. This needs
70 # uncomment to enable the implicit "host" layer for all system calls
71 # made by perl. This needs USE_MULTI above. This is also needed to
77 # Comment out next assign to disable perl's I/O subsystem and use compiler's
78 # stdio for IO - depending on your compiler vendor and run time library you may
79 # then get a number of fails from make test i.e. bugs - complain to them not us ;-).
80 # You will also be unable to take full advantage of perl5.8's support for multiple
81 # encodings and may see lower IO performance. You have been warned.
85 # Comment this out if you don't want to enable large file support for
86 # some reason. Should normally only be changed to maintain compatibility
87 # with an older release of perl.
88 USE_LARGE_FILES = define
91 # uncomment exactly one of the following
95 # Visual C++ > 2.x and < 6.x
97 # Visual C++ 6.x (aka Visual C++ 98)
99 # Visual C++ Toolkit 2003 (aka Visual C++ 7.x) (free command-line tools)
101 # Visual C++ .NET 2003 (aka Visual C++ 7.x) (full version)
103 # Visual C++ 2005 Express Edition (aka Visual C++ 8.x) (free version)
105 # Visual C++ 2005 (aka Visual C++ 8.x) (full version)
107 # Visual C++ 2008 Express Edition (aka Visual C++ 9.x) (free version)
109 # Visual C++ 2008 (aka Visual C++ 9.x) (full version)
113 # uncomment next line if you want debug version of perl (big,slow)
114 # If not enabled, we automatically try to use maximum optimization
115 # with all compilers that are known to have a working optimizer.
120 # uncomment to enable use of PerlCRT.DLL when using the Visual C compiler.
121 # It has patches that fix known bugs in older versions of MSVCRT.DLL.
122 # This currently requires VC 5.0 with Service Pack 3 or later.
123 # Get it from CPAN at http://www.cpan.org/authors/id/D/DO/DOUGL/
124 # and follow the directions in the package to install.
126 # Not recommended if you have VC 6.x and you're not running Windows 9x.
128 #USE_PERLCRT = define
131 # uncomment to enable linking with setargv.obj under the Visual C
132 # compiler. Setting this options enables perl to expand wildcards in
133 # arguments, but it may be harder to use alternate methods like
134 # File::DosGlob that are more powerful. This option is supported only with
137 #USE_SETARGV = define
140 # if you want to have the crypt() builtin function implemented, leave this or
141 # CRYPT_LIB uncommented. The fcrypt.c file named here contains a suitable
142 # version of des_fcrypt().
147 # if you didn't set CRYPT_SRC and if you have des_fcrypt() available in a
148 # library, uncomment this, and make sure the library exists (see README.win32)
149 # Specify the full pathname of the library.
151 #CRYPT_LIB = fcrypt.lib
154 # set this if you wish to use perl's malloc
155 # WARNING: Turning this on/off WILL break binary compatibility with extensions
156 # you may have compiled with/without it. Be prepared to recompile all
157 # extensions if you change the default. Currently, this cannot be enabled
158 # if you ask for USE_IMP_SYS above.
160 #PERL_MALLOC = define
163 # set this to enable debugging mstats
164 # This must be enabled to use the Devel::Peek::mstat() function. This cannot
165 # be enabled without PERL_MALLOC as well.
167 #DEBUG_MSTATS = define
170 # set this to additionally provide a statically linked perl-static.exe.
171 # Note that dynamic loading will not work with this perl, so you must
172 # include required modules statically using the STATIC_EXT or ALL_STATIC
173 # variables below. A static library perl511s.lib will also be created.
174 # Ordinary perl.exe is not affected by this option.
176 #BUILD_STATIC = define
179 # in addition to BUILD_STATIC the option ALL_STATIC makes *every*
180 # extension get statically built
181 # This will result in a very large perl executable, but the main purpose
182 # is to have proper linking set so as to be able to create miscellaneous
183 # executables with different built-in extensions
189 # set the install locations of the compiler include/libraries
190 # Running VCVARS32.BAT is *required* when using Visual C.
191 # Some versions of Visual C don't define MSVCDIR in the environment,
192 # so you may have to set CCHOME explicitly (spaces in the path name should
197 CCINCDIR = $(CCHOME)\include
198 CCLIBDIR = $(CCHOME)\lib
201 # Additional compiler flags can be specified here.
203 BUILDOPT = $(BUILDOPTEXTRA)
206 # Adding -DPERL_HASH_SEED_EXPLICIT will disable randomization of Perl's
207 # internal hash function unless the PERL_HASH_SEED environment variable is set.
208 # Alternatively, adding -DNO_HASH_SEED will completely disable the
209 # randomization feature.
210 # The latter is required to maintain binary compatibility with Perl 5.8.0.
212 #BUILDOPT = $(BUILDOPT) -DPERL_HASH_SEED_EXPLICIT
213 #BUILDOPT = $(BUILDOPT) -DNO_HASH_SEED
216 # This should normally be disabled. Adding -DPERL_POLLUTE enables support
217 # for old symbols by default, at the expense of extreme pollution. You most
218 # probably just want to build modules that won't compile with
219 # perl Makefile.PL POLLUTE=1
220 # instead of enabling this. Please report such modules to the respective
223 #BUILDOPT = $(BUILDOPT) -DPERL_POLLUTE
226 # This should normally be disabled. Enabling it will disable the File::Glob
227 # implementation of CORE::glob.
229 #BUILDOPT = $(BUILDOPT) -DPERL_EXTERNAL_GLOB
232 # This should normally be disabled. Enabling it causes perl to read scripts
233 # in text mode (which is the 5.005 behavior) and will break ByteLoader.
235 #BUILDOPT = $(BUILDOPT) -DPERL_TEXTMODE_SCRIPTS
238 # specify semicolon-separated list of extra directories that modules will
239 # look for libraries (spaces in path names need not be quoted)
244 # set this to your email address (perl will guess a value from
245 # from your loginname and your hostname, which may not be right)
250 ## Build configuration ends.
253 ##################### CHANGE THESE ONLY IF YOU MUST #####################
255 !IF "$(CRYPT_SRC)$(CRYPT_LIB)" == ""
259 CRYPT_FLAG = -DHAVE_DES_FCRYPT
262 !IF "$(USE_IMP_SYS)" == "define"
267 !IF "$(PERL_MALLOC)" == ""
272 !IF "$(DEBUG_MSTATS)" == ""
276 !IF "$(DEBUG_MSTATS)" == "define"
277 BUILDOPT = $(BUILDOPT) -DPERL_DEBUGGING_MSTATS
280 !IF "$(USE_SITECUST)" == ""
284 !IF "$(USE_MULTI)" == ""
288 !IF "$(USE_ITHREADS)" == ""
292 !IF "$(USE_IMP_SYS)" == ""
296 !IF "$(USE_PERLIO)" == ""
300 !IF "$(USE_LARGE_FILES)" == ""
301 USE_LARGE_FILES = undef
304 !IF "$(USE_PERLCRT)" == ""
308 !IF "$(USE_IMP_SYS)$(USE_MULTI)" == "defineundef"
312 !IF "$(USE_ITHREADS)$(USE_MULTI)" == "defineundef"
316 !IF "$(USE_SITECUST)" == "define"
317 BUILDOPT = $(BUILDOPT) -DUSE_SITECUSTOMIZE
320 !IF "$(USE_MULTI)" != "undef"
321 BUILDOPT = $(BUILDOPT) -DPERL_IMPLICIT_CONTEXT
324 !IF "$(USE_IMP_SYS)" != "undef"
325 BUILDOPT = $(BUILDOPT) -DPERL_IMPLICIT_SYS
328 !IF "$(PROCESSOR_ARCHITECTURE)" == ""
329 PROCESSOR_ARCHITECTURE = x86
333 # When we are running from a 32bit cmd.exe on AMD64 then
334 # PROCESSOR_ARCHITECTURE is set to x86 and PROCESSOR_ARCHITEW6432
336 !IF "$(PROCESSOR_ARCHITEW6432)" != ""
337 PROCESSOR_ARCHITECTURE = $(PROCESSOR_ARCHITEW6432)
340 !IF "$(PROCESSOR_ARCHITECTURE)" == "AMD64" || "$(PROCESSOR_ARCHITECTURE)" == "IA64"
348 ARCHITECTURE = $(PROCESSOR_ARCHITECTURE)
349 !IF "$(ARCHITECTURE)" == "AMD64"
352 !IF "$(ARCHITECTURE)" == "IA64"
356 !IF "$(USE_MULTI)" == "define"
357 ARCHNAME = MSWin32-$(ARCHITECTURE)-multi
359 !IF "$(USE_PERLIO)" == "define"
360 ARCHNAME = MSWin32-$(ARCHITECTURE)-perlio
362 ARCHNAME = MSWin32-$(ARCHITECTURE)
366 !IF "$(USE_PERLIO)" == "define"
367 BUILDOPT = $(BUILDOPT) -DUSE_PERLIO
370 !IF "$(USE_ITHREADS)" == "define"
371 ARCHNAME = $(ARCHNAME)-thread
374 # Visual C++ 98, .NET 2003, 2005 and 2008 specific.
375 # VC++ 6.x, 7.x, 8.x and 9.x can load DLL's on demand. Makes the test suite run
376 # in about 10% less time. (The free version of 7.x can't do this, but the free
377 # versions of 8.x and 9.x can.)
378 !IF "$(CCTYPE)" == "MSVC60" || "$(CCTYPE)" == "MSVC70" || \
379 "$(CCTYPE)" == "MSVC80" || "$(CCTYPE)" == "MSVC80FREE" || \
380 "$(CCTYPE)" == "MSVC90" || "$(CCTYPE)" == "MSVC90FREE"
381 DELAYLOAD = -DELAYLOAD:ws2_32.dll delayimp.lib
384 # Visual C++ 2005 and 2008 (VC++ 8.x and 9.x) create manifest files for EXEs and
385 # DLLs. These either need copying everywhere with the binaries, or else need
386 # embedding in them otherwise MSVCR80.dll or MSVCR90.dll won't be found. For
387 # simplicity, embed them if they exist (and delete them afterwards so that they
388 # don't get installed too).
389 EMBED_EXE_MANI = if exist $@.manifest mt -nologo -manifest $@.manifest -outputresource:$@;1 && \
390 if exist $@.manifest del $@.manifest
391 EMBED_DLL_MANI = if exist $@.manifest mt -nologo -manifest $@.manifest -outputresource:$@;2 && \
392 if exist $@.manifest del $@.manifest
394 ARCHDIR = ..\lib\$(ARCHNAME)
395 COREDIR = ..\lib\CORE
396 AUTODIR = ..\lib\auto
400 EXTUTILSDIR = $(LIBDIR)\ExtUtils
404 INST_SCRIPT = $(INST_TOP)$(INST_VER)\bin
405 INST_BIN = $(INST_SCRIPT)$(INST_ARCH)
406 INST_LIB = $(INST_TOP)$(INST_VER)\lib
407 INST_ARCHLIB = $(INST_LIB)$(INST_ARCH)
408 INST_COREDIR = $(INST_ARCHLIB)\CORE
409 INST_HTML = $(INST_TOP)$(INST_VER)\html
412 # Programs to compile, build .lib files and link
417 LIB32 = $(LINK32) -lib
424 INCLUDES = -I$(COREDIR) -I.\include -I. -I..
425 #PCHFLAGS = -Fpc:\temp\vcmoduls.pch -YX
426 DEFINES = -DWIN32 -D_CONSOLE -DNO_STRICT $(CRYPT_FLAG)
427 LOCDEFS = -DPERLDLL -DPERL_CORE
431 !IF "$(USE_PERLCRT)" != "define"
437 !IF "$(CFG)" == "Debug"
438 ! IF "$(CCTYPE)" == "MSVC20"
439 OPTIMIZE = -Od -MD -Z7 -DDEBUGGING
441 OPTIMIZE = -Od -MD -Zi -DDEBUGGING
445 OPTIMIZE = -MD -Zi -DNDEBUG
446 # we enable debug symbols in release builds also
447 LINK_DBG = -debug -opt:ref,icf
448 # you may want to enable this if you want COFF symbols in the executables
449 # in addition to the PDB symbols. The default Dr. Watson that ships with
450 # Windows can use the the former but not latter. The free WinDbg can be
451 # installed to get better stack traces from just the PDB symbols, so we
452 # avoid the bloat of COFF symbols by default.
453 #LINK_DBG = $(LINK_DBG) -debugtype:both
454 ! IF "$(WIN64)" == "define"
455 # enable Whole Program Optimizations (WPO) and Link Time Code Generation (LTCG)
456 OPTIMIZE = $(OPTIMIZE) -Ox -GL
457 LINK_DBG = $(LINK_DBG) -ltcg
459 # -O1 yields smaller code, which turns out to be faster than -O2 on x86
460 OPTIMIZE = $(OPTIMIZE) -O1
461 #OPTIMIZE = $(OPTIMIZE) -O2
465 !IF "$(WIN64)" == "define"
466 DEFINES = $(DEFINES) -DWIN64 -DCONSERVATIVE
467 OPTIMIZE = $(OPTIMIZE) -Wp64 -fp:precise
470 # For now, silence VC++ 8.x's and 9.x's warnings about "unsafe" CRT functions
471 # and POSIX CRT function names being deprecated.
472 !IF "$(CCTYPE)" == "MSVC80" || "$(CCTYPE)" == "MSVC80FREE" || \
473 "$(CCTYPE)" == "MSVC90" || "$(CCTYPE)" == "MSVC90FREE"
474 DEFINES = $(DEFINES) -D_CRT_SECURE_NO_DEPRECATE -D_CRT_NONSTDC_NO_DEPRECATE
477 # Use the MSVCRT read() fix if the PerlCRT was not chosen, but only when using
478 # VC++ 6.x or earlier. Later versions use MSVCR70.dll, MSVCR71.dll, etc, which
479 # do not require the fix.
480 !IF "$(CCTYPE)" == "MSVC20" || "$(CCTYPE)" == "MSVC" || "$(CCTYPE)" == "MSVC60"
481 ! IF "$(USE_PERLCRT)" != "define"
482 BUILDOPT = $(BUILDOPT) -DPERL_MSVCRT_READFIX
486 LIBBASEFILES = $(CRYPT_LIB) \
487 oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \
488 comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \
489 netapi32.lib uuid.lib ws2_32.lib mpr.lib winmm.lib \
490 version.lib odbc32.lib odbccp32.lib
492 # The 64 bit Platform SDK compilers contain a runtime library that doesn't
493 # include the buffer overrun verification code used by the /GS switch.
494 # Since the code links against libraries that are compiled with /GS, this
495 # "security cookie verification" must be included via bufferoverlow.lib.
496 !IF "$(WIN64)" == "define"
497 LIBBASEFILES = $(LIBBASEFILES) bufferoverflowU.lib
500 # we add LIBC here, since we may be using PerlCRT.dll
501 LIBFILES = $(LIBBASEFILES) $(LIBC)
503 #EXTRACFLAGS = -nologo -GF -W4 -wd4127 -wd4706
504 EXTRACFLAGS = -nologo -GF -W3
505 CFLAGS = $(EXTRACFLAGS) $(INCLUDES) $(DEFINES) $(LOCDEFS) \
506 $(PCHFLAGS) $(OPTIMIZE)
507 LINK_FLAGS = -nologo -nodefaultlib $(LINK_DBG) \
508 -libpath:"$(INST_COREDIR)" \
509 -machine:$(PROCESSOR_ARCHITECTURE)
514 CFLAGS_O = $(CFLAGS) $(BUILDOPT)
516 #################### do not edit below this line #######################
517 ############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ##############
525 .SUFFIXES : .c $(o) .dll .lib .exe .rc .res
528 $(CC) -c -I$(<D) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $<
534 $(LINK32) -dll -subsystem:windows -implib:$(*B).lib -def:$(*B).def \
535 -out:$@ $(LINK_FLAGS) $(LIBFILES) $< $(LIBPERL)
544 # makedef.pl must be updated if this changes, and this should normally
545 # only change when there is an incompatible revision of the public API.
546 PERLIMPLIB = ..\perl511.lib
547 PERLSTATICLIB = ..\perl511s.lib
548 PERLDLL = ..\perl511.dll
550 MINIPERL = ..\miniperl.exe
552 PERLEXE = ..\perl.exe
553 WPERLEXE = ..\wperl.exe
554 PERLEXESTATIC = ..\perl-static.exe
555 GLOBEXE = ..\perlglob.exe
556 CONFIGPM = ..\lib\Config.pm ..\lib\Config_heavy.pl
557 MINIMOD = ..\lib\ExtUtils\Miniperl.pm
559 GENUUDMAP = ..\generate_uudmap.exe
560 !IF "$(BUILD_STATIC)" == "define"
566 # Unicode data files generated by mktables
567 FIRSTUNIFILE = ..\lib\unicore\Canonical.pl
568 UNIDATAFILES = ..\lib\unicore\Canonical.pl ..\lib\unicore\Exact.pl \
569 ..\lib\unicore\Properties ..\lib\unicore\Decomposition.pl \
570 ..\lib\unicore\CombiningClass.pl ..\lib\unicore\Name.pl \
571 ..\lib\unicore\PVA.pl
573 # Directories of Unicode data files generated by mktables
574 UNIDATADIR1 = ..\lib\unicore\To
575 UNIDATADIR2 = ..\lib\unicore\lib
577 PERLEXE_ICO = .\perlexe.ico
578 PERLEXE_RES = .\perlexe.res
581 # Nominate a target which causes extensions to be re-built
582 # This used to be $(PERLEXE), but at worst it is the .dll that they depend
583 # on and really only the interface - i.e. the .def file used to export symbols
585 PERLDEP = perldll.def
587 PL2BAT = bin\pl2bat.pl
588 GLOBBAT = bin\perlglob.bat
604 ..\utils\config_data \
611 ..\utils\cpanp-run-perl \
635 !IF "$(WIN64)" == "define"
636 CFGSH_TMPL = config.vc64
637 CFGH_TMPL = config_H.vc64
639 CFGSH_TMPL = config.vc
640 CFGH_TMPL = config_H.vc
643 XCOPY = xcopy /f /r /i /d /y
644 RCOPY = xcopy /f /r /i /e /d /y
651 # filenames given to xsubpp must have forward slashes (since it puts
652 # full pathnames in #line strings)
653 XSUBPP = ..\$(MINIPERL) -I..\..\lib ..\$(EXTUTILSDIR)\xsubpp \
693 EXTRACORE_SRC = $(EXTRACORE_SRC) perllib.c
695 !IF "$(PERL_MALLOC)" == "define"
696 EXTRACORE_SRC = $(EXTRACORE_SRC) ..\malloc.c
699 EXTRACORE_SRC = $(EXTRACORE_SRC) ..\perlio.c
706 # We need this for miniperl build unless we override canned
707 # config.h #define building mini\*
708 #!IF "$(USE_PERLIO)" == "define"
709 WIN32_SRC = $(WIN32_SRC) .\win32io.c
712 !IF "$(CRYPT_SRC)" != ""
713 WIN32_SRC = $(WIN32_SRC) .\$(CRYPT_SRC)
716 DLL_SRC = $(DYNALOADER).c
762 .\include\sys\socket.h \
765 CORE_H = $(CORE_NOCFG_H) .\config.h ..\git_version.h
767 UUDMAP_H = ..\uudmap.h
768 BITCOUNT_H = ..\bitcount.h
770 MICROCORE_OBJ = $(MICROCORE_SRC:.c=.obj)
771 CORE_OBJ = $(MICROCORE_OBJ) $(EXTRACORE_SRC:.c=.obj)
772 WIN32_OBJ = $(WIN32_SRC:.c=.obj)
773 MINICORE_OBJ = $(MICROCORE_OBJ:..\=.\mini\) \
774 $(MINIDIR)\miniperlmain$(o) \
775 $(MINIDIR)\perlio$(o)
776 MINIWIN32_OBJ = $(WIN32_OBJ:.\=.\mini\)
777 MINI_OBJ = $(MINICORE_OBJ) $(MINIWIN32_OBJ)
778 DLL_OBJ = $(DLL_SRC:.c=.obj)
779 X2P_OBJ = $(X2P_SRC:.c=.obj)
780 GENUUDMAP_OBJ = $(GENUUDMAP:.exe=.obj)
782 PERLDLL_OBJ = $(CORE_OBJ)
783 PERLEXE_OBJ = perlmain$(o)
784 PERLEXEST_OBJ = perlmainst$(o)
786 PERLDLL_OBJ = $(PERLDLL_OBJ) $(WIN32_OBJ) $(DLL_OBJ)
788 !IF "$(USE_SETARGV)" != ""
789 SETARGV_OBJ = setargv$(o)
792 !IF "$(ALL_STATIC)" == "define"
793 # some exclusions, unfortunately, until fixed:
794 # - Win32 extension contains overlapped symbols with win32.c (BUG!)
795 # - MakeMaker isn't capable enough for SDBM_File (smaller bug)
796 # - Encode (encoding search algorithm relies on shared library?)
797 STATIC_EXT = * !Win32 !SDBM_File !Encode
799 # specify static extensions here, for example:
800 #STATIC_EXT = Cwd Compress/Raw/Zlib
801 STATIC_EXT = Win32CORE
804 DYNALOADER = $(EXTDIR)\DynaLoader\DynaLoader
807 "INST_DRV=$(INST_DRV)" \
808 "INST_TOP=$(INST_TOP)" \
809 "INST_VER=$(INST_VER)" \
810 "INST_ARCH=$(INST_ARCH)" \
811 "archname=$(ARCHNAME)" \
814 "ccflags=$(EXTRACFLAGS) $(OPTIMIZE:"=\") $(DEFINES) $(BUILDOPT)" \
815 "cf_email=$(EMAIL)" \
816 "d_crypt=$(D_CRYPT)" \
817 "d_mymalloc=$(PERL_MALLOC)" \
819 "incpath=$(CCINCDIR:"=\")" \
820 "libperl=$(PERLIMPLIB:..\=)" \
821 "libpth=$(CCLIBDIR:"=\");$(EXTRALIBDIRS:"=\")" \
823 "make=$(MAKE_BARE)" \
824 "static_ext=$(STATIC_EXT)" \
825 "usethreads=$(USE_ITHREADS)" \
826 "useithreads=$(USE_ITHREADS)" \
827 "usemultiplicity=$(USE_MULTI)" \
828 "useperlio=$(USE_PERLIO)" \
829 "uselargefiles=$(USE_LARGE_FILES)" \
830 "usesitecustomize=$(USE_SITECUST)" \
831 "LINK_FLAGS=$(LINK_FLAGS:"=\")" \
832 "optimize=$(OPTIMIZE:"=\")"
838 all : .\config.h ..\git_version.h $(GLOBEXE) $(MINIMOD) $(CONFIGPM) \
839 $(UNIDATAFILES) MakePPPort $(PERLEXE) $(X2P) Extensions $(PERLSTATIC)
840 @echo Everything is up to date. '$(MAKE_BARE) test' to run test suite.
842 ..\regcharclass.h : ..\Porting\regcharclass.pl
844 miniperl Porting\regcharclass.pl
847 regnodes : ..\regnodes.h
849 ..\regcomp$(o) : ..\regnodes.h ..\regcharclass.h
851 ..\regexec$(o) : ..\regnodes.h ..\regcharclass.h
853 reonly : regnodes .\config.h ..\git_version.h $(GLOBEXE) $(MINIMOD) $(CONFIGPM) \
854 $(UNIDATAFILES) $(PERLEXE) $(X2P) Extensions_reonly
855 @echo Perl and 're' are up to date.
857 $(DYNALOADER)$(o) : $(DYNALOADER).c $(CORE_H) $(EXTDIR)\DynaLoader\dlutils.c
859 static: $(PERLEXESTATIC)
861 #------------------------------------------------------------
863 $(GLOBEXE) : perlglob$(o)
864 $(LINK32) $(LINK_FLAGS) $(LIBFILES) -out:$@ -subsystem:$(SUBSYS) \
865 perlglob$(o) setargv$(o)
868 perlglob$(o) : perlglob.c
870 config.w32 : $(CFGSH_TMPL)
871 copy $(CFGSH_TMPL) config.w32
873 .\config.h : $(CFGH_TMPL)
875 copy $(CFGH_TMPL) config.h
877 ..\git_version.h : $(MINIPERL) ..\make_patchnum.pl
879 miniperl -Ilib make_patchnum.pl
882 # make sure that we recompile perl.c if the git version changes
883 ..\perl$(o) : ..\git_version.h
885 ..\config.sh : config.w32 $(MINIPERL) config_sh.PL
886 $(MINIPERL) -I..\lib config_sh.PL $(CFG_VARS) config.w32 > ..\config.sh
888 # this target is for when changes to the main config.sh happen.
889 # edit config.vc, then make perl in a minimal configuration (i.e. with MULTI,
890 # ITHREADS, IMP_SYS, LARGE_FILES, PERLIO and CRYPT off), then make this target
891 # to regenerate config_H.vc.
892 # repeat for config.vc64 and config_H.vc64 if you have a suitable build
893 # environment, otherwise hand-edit them to maintain the same differences with
894 # config.vc and config_H.vc as before.
895 # unfortunately, some further manual editing is also then required to restore all
896 # the special __GNUC__ handling that is otherwise lost.
898 $(MINIPERL) -I..\lib config_sh.PL $(CFG_VARS) $(CFGSH_TMPL) > ..\config.sh
903 -$(MINIPERL) -I..\lib config_h.PL "INST_VER=$(INST_VER)"
904 rename config.h $(CFGH_TMPL)
906 $(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl
910 if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL)
911 $(XCOPY) ..\*.h $(COREDIR)\*.*
912 $(XCOPY) *.h $(COREDIR)\*.*
913 $(XCOPY) ..\ext\re\re.pm $(LIBDIR)\*.*
914 $(RCOPY) include $(COREDIR)\*.*
915 -$(MINIPERL) -I..\lib config_h.PL "INST_VER=$(INST_VER)"
916 if errorlevel 1 $(MAKE) /$(MAKEFLAGS) $(CONFIGPM)
918 $(MINIPERL) : $(MINIDIR) $(MINI_OBJ)
919 $(LINK32) -subsystem:console -out:$@ @<<
920 $(LINK_FLAGS) $(LIBFILES) $(MINI_OBJ)
925 if not exist "$(MINIDIR)" mkdir "$(MINIDIR)"
927 $(MINICORE_OBJ) : $(CORE_NOCFG_H)
928 $(CC) -c $(CFLAGS) -DPERL_EXTERNAL_GLOB -DPERL_IS_MINIPERL $(OBJOUT_FLAG)$@ ..\$(*F).c
930 $(MINIWIN32_OBJ) : $(CORE_NOCFG_H)
931 $(CC) -c $(CFLAGS) $(OBJOUT_FLAG)$@ $(*F).c
933 # -DPERL_IMPLICIT_SYS needs C++ for perllib.c
934 # This is the only file that depends on perlhost.h, vmem.h, and vdir.h
935 !IF "$(USE_IMP_SYS)" == "define"
936 perllib$(o) : perllib.c .\perlhost.h .\vdir.h .\vmem.h
937 $(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c
940 # 1. we don't want to rebuild miniperl.exe when config.h changes
941 # 2. we don't want to rebuild miniperl.exe with non-default config.h
942 # 3. we can't have miniperl.exe depend on git_version.h, as miniperl creates it
943 $(MINI_OBJ) : $(CORE_NOCFG_H)
945 $(WIN32_OBJ) : $(CORE_H)
946 $(CORE_OBJ) : $(CORE_H)
947 $(DLL_OBJ) : $(CORE_H)
948 $(X2P_OBJ) : $(CORE_H)
950 perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym ..\pp.sym ..\makedef.pl create_perllibst_h.pl
951 $(MINIPERL) -I..\lib create_perllibst_h.pl
952 $(MINIPERL) -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) $(BUILDOPT) \
953 CCTYPE=$(CCTYPE) > perldll.def
955 $(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES) Extensions_static
956 $(LINK32) -dll -def:perldll.def -base:0x28000000 -out:$@ @Extensions_static @<<
957 $(LINK_FLAGS) $(DELAYLOAD) $(LIBFILES) $(PERLDLL_OBJ) $(PERLDLL_RES)
960 $(XCOPY) $(PERLIMPLIB) $(COREDIR)
962 $(PERLSTATICLIB): Extensions_static
963 $(LIB32) $(LIB_FLAGS) -out:$@ @Extensions_static @<<
966 $(XCOPY) $(PERLSTATICLIB) $(COREDIR)
968 $(PERLEXE_ICO): $(MINIPERL) ..\uupacktool.pl $(PERLEXE_ICO).packd
969 $(MINIPERL) -I..\lib ..\uupacktool.pl -u $(PERLEXE_ICO).packd $(PERLEXE_ICO)
971 $(PERLEXE_RES): perlexe.rc $(PERLEXE_ICO)
973 $(MINIMOD) : $(MINIPERL) ..\minimod.pl
975 miniperl minimod.pl > lib\ExtUtils\Miniperl.pm
978 ..\x2p\a2p$(o) : ..\x2p\a2p.c
979 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\a2p.c
981 ..\x2p\hash$(o) : ..\x2p\hash.c
982 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\hash.c
984 ..\x2p\str$(o) : ..\x2p\str.c
985 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\str.c
987 ..\x2p\util$(o) : ..\x2p\util.c
988 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\util.c
990 ..\x2p\walk$(o) : ..\x2p\walk.c
991 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\walk.c
993 $(X2P) : $(MINIPERL) $(X2P_OBJ)
994 $(MINIPERL) ..\x2p\find2perl.PL
995 $(MINIPERL) ..\x2p\s2p.PL
996 $(LINK32) -subsystem:console -out:$@ @<<
997 $(LINK_FLAGS) $(LIBFILES) $(X2P_OBJ)
1001 $(MINIDIR)\globals$(o) : $(UUDMAP_H) $(BITCOUNT_H)
1003 $(UUDMAP_H) $(BITCOUNT_H) : $(GENUUDMAP)
1004 $(GENUUDMAP) $(UUDMAP_H) $(BITCOUNT_H)
1006 $(GENUUDMAP) : $(GENUUDMAP_OBJ)
1007 $(LINK32) -subsystem:console -out:$@ @<<
1008 $(LINK_FLAGS) $(LIBFILES) $(GENUUDMAP_OBJ)
1012 perlmain.c : runperl.c
1013 copy runperl.c perlmain.c
1015 perlmain$(o) : perlmain.c
1016 $(CC) $(CFLAGS_O:-DPERLDLL=-UPERLDLL) $(OBJOUT_FLAG)$@ -c perlmain.c
1018 perlmainst.c : runperl.c
1019 copy runperl.c perlmainst.c
1021 perlmainst$(o) : perlmainst.c
1022 $(CC) $(CFLAGS_O) $(OBJOUT_FLAG)$@ -c perlmainst.c
1024 $(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES)
1025 $(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(LINK_FLAGS) \
1026 $(LIBFILES) $(PERLEXE_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB) $(PERLEXE_RES)
1028 copy $(PERLEXE) $(WPERLEXE)
1029 $(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS
1030 copy splittree.pl ..
1031 $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
1033 $(PERLEXESTATIC): $(PERLSTATICLIB) $(CONFIGPM) $(PERLEXEST_OBJ) $(PERLEXE_RES)
1034 $(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(LINK_FLAGS) \
1035 @Extensions_static $(PERLSTATICLIB) /PDB:NONE \
1036 $(LIBFILES) $(PERLEXEST_OBJ) $(SETARGV_OBJ) $(PERLEXE_RES)
1039 $(DYNALOADER).c: $(MINIPERL) $(EXTDIR)\DynaLoader\dl_win32.xs $(CONFIGPM)
1040 if not exist $(AUTODIR) mkdir $(AUTODIR)
1042 ..\$(MINIPERL) -I..\..\lib $(*B)_pm.PL
1043 ..\$(MINIPERL) -I..\..\lib XSLoader_pm.PL
1045 $(XCOPY) $(EXTDIR)\$(*B)\$(*B).pm $(LIBDIR)\$(NULL)
1046 $(XCOPY) $(EXTDIR)\$(*B)\XSLoader.pm $(LIBDIR)\$(NULL)
1048 $(XSUBPP) dl_win32.xs > $(*B).c
1051 $(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs
1052 copy dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs
1054 MakePPPort: $(MINIPERL) $(CONFIGPM)
1055 $(MINIPERL) -I..\lib ..\mkppport
1058 -if exist $(MINIPERL) $(MINIPERL) -I..\lib ..\mkppport --clean
1060 #-------------------------------------------------------------------------------
1061 Extensions: ..\make_ext.pl $(PERLDEP) $(CONFIGPM)
1062 $(XCOPY) ..\*.h $(COREDIR)\*.*
1063 $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(EXTDIR) --dynamic
1065 Extensions_reonly: ..\make_ext.pl $(PERLDEP) $(CONFIGPM)
1066 $(XCOPY) ..\*.h $(COREDIR)\*.*
1067 $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(EXTDIR) --dynamic +re
1069 Extensions_static : ..\make_ext.pl list_static_libs.pl $(PERLDEP) $(CONFIGPM)
1070 $(XCOPY) ..\*.h $(COREDIR)\*.*
1071 $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(EXTDIR) --static
1072 $(MINIPERL) -I..\lib list_static_libs.pl > Extensions_static
1075 -if exist $(MINIPERL) $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(EXTDIR) --all --target=clean
1077 Extensions_realclean:
1078 -if exist $(MINIPERL) $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(EXTDIR) --all --target=realclean
1080 #-------------------------------------------------------------------------------
1083 $(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=$(HTMLDIR) \
1084 --podpath=pod:lib:ext:utils --htmlroot="file://$(INST_HTML::=|)" \
1085 --libpod=perlfunc:perlguts:perlvar:perlrun:perlop --recurse
1087 # Note that this next section is parsed (and regenerated) by pod/buildtoc
1088 # so please check that script before making structural changes here
1090 utils: $(PERLEXE) $(X2P)
1092 $(MAKE) PERL=$(MINIPERL)
1094 copy ..\README.aix ..\pod\perlaix.pod
1095 copy ..\README.amiga ..\pod\perlamiga.pod
1096 copy ..\README.apollo ..\pod\perlapollo.pod
1097 copy ..\README.beos ..\pod\perlbeos.pod
1098 copy ..\README.bs2000 ..\pod\perlbs2000.pod
1099 copy ..\README.ce ..\pod\perlce.pod
1100 copy ..\README.cn ..\pod\perlcn.pod
1101 copy ..\README.cygwin ..\pod\perlcygwin.pod
1102 copy ..\README.dgux ..\pod\perldgux.pod
1103 copy ..\README.dos ..\pod\perldos.pod
1104 copy ..\README.epoc ..\pod\perlepoc.pod
1105 copy ..\README.freebsd ..\pod\perlfreebsd.pod
1106 copy ..\README.haiku ..\pod\perlhaiku.pod
1107 copy ..\README.hpux ..\pod\perlhpux.pod
1108 copy ..\README.hurd ..\pod\perlhurd.pod
1109 copy ..\README.irix ..\pod\perlirix.pod
1110 copy ..\README.jp ..\pod\perljp.pod
1111 copy ..\README.ko ..\pod\perlko.pod
1112 copy ..\README.linux ..\pod\perllinux.pod
1113 copy ..\README.machten ..\pod\perlmachten.pod
1114 copy ..\README.macos ..\pod\perlmacos.pod
1115 copy ..\README.macosx ..\pod\perlmacosx.pod
1116 copy ..\README.mint ..\pod\perlmint.pod
1117 copy ..\README.mpeix ..\pod\perlmpeix.pod
1118 copy ..\README.netware ..\pod\perlnetware.pod
1119 copy ..\README.openbsd ..\pod\perlopenbsd.pod
1120 copy ..\README.os2 ..\pod\perlos2.pod
1121 copy ..\README.os390 ..\pod\perlos390.pod
1122 copy ..\README.os400 ..\pod\perlos400.pod
1123 copy ..\README.plan9 ..\pod\perlplan9.pod
1124 copy ..\README.qnx ..\pod\perlqnx.pod
1125 copy ..\README.riscos ..\pod\perlriscos.pod
1126 copy ..\README.solaris ..\pod\perlsolaris.pod
1127 copy ..\README.symbian ..\pod\perlsymbian.pod
1128 copy ..\README.tru64 ..\pod\perltru64.pod
1129 copy ..\README.tw ..\pod\perltw.pod
1130 copy ..\README.uts ..\pod\perluts.pod
1131 copy ..\README.vmesa ..\pod\perlvmesa.pod
1132 copy ..\README.vos ..\pod\perlvos.pod
1133 copy ..\README.win32 ..\pod\perlwin32.pod
1134 copy ..\pod\perl5110delta.pod ..\pod\perldelta.pod
1135 $(MAKE) -f ..\win32\pod.mak converters
1137 $(PERLEXE) lib_pm.PL
1139 $(PERLEXE) $(PL2BAT) $(UTILS)
1140 $(PERLEXE) ..\autodoc.pl ..
1141 $(PERLEXE) ..\pod\buildtoc --build-toc -q
1143 # Note that the pod cleanup in this next section is parsed (and regenerated
1144 # by pod/buildtoc so please check that script before making changes here
1146 distclean: realclean
1147 -del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \
1148 $(PERLIMPLIB) ..\miniperl.lib $(MINIMOD) \
1149 $(PERLEXESTATIC) $(PERLSTATICLIB)
1151 -del /f $(DYNALOADER).c
1152 -del /f $(EXTDIR)\DynaLoader\dl_win32.xs
1153 -del /f $(EXTDIR)\DynaLoader\DynaLoader.pm
1154 -del /f $(EXTDIR)\DynaLoader\XSLoader.pm
1155 -del /f $(LIBDIR)\Encode.pm $(LIBDIR)\encoding.pm $(LIBDIR)\Errno.pm
1156 -del /f $(LIBDIR)\Config.pod $(LIBDIR)\POSIX.pod $(LIBDIR)\threads.pm
1157 -del /f $(LIBDIR)\.exists $(LIBDIR)\attributes.pm $(LIBDIR)\DynaLoader.pm
1158 -del /f $(LIBDIR)\XSLoader.pm $(LIBDIR)\lib.pm
1159 -del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm
1160 -del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm
1161 -del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm
1162 -del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm
1163 -del /f $(LIBDIR)\Devel\Peek.pm $(LIBDIR)\Devel\DProf.pm
1164 -del /f $(LIBDIR)\Devel\PPPort.pm
1165 -del /f $(LIBDIR)\File\Glob.pm
1166 -del /f $(LIBDIR)\Storable.pm
1167 -del /f $(LIBDIR)\Digest\MD5.pm
1168 -del /f $(LIBDIR)\Digest\SHA.pm
1169 -del /f $(LIBDIR)\PerlIO\encoding.pm
1170 -del /f $(LIBDIR)\PerlIO\scalar.pm
1171 -del /f $(LIBDIR)\PerlIO\via.pm
1172 -del /f $(LIBDIR)\Sys\Hostname.pm
1173 -del /f $(LIBDIR)\threads\shared.pm
1174 -del /f $(LIBDIR)\Time\HiRes.pm
1175 -del /f $(LIBDIR)\Unicode\Normalize.pm
1176 -del /f $(LIBDIR)\Math\BigInt\FastCalc.pm
1177 -del /f $(LIBDIR)\Win32.pm
1178 -del /f $(LIBDIR)\Win32CORE.pm
1179 -del /f $(LIBDIR)\Win32API\File.pm
1180 -del /f $(LIBDIR)\Win32API\File\cFile.pc
1181 -if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B
1182 -if exist $(LIBDIR)\Compress rmdir /s /q $(LIBDIR)\Compress
1183 -if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data
1184 -if exist $(LIBDIR)\Encode rmdir /s /q $(LIBDIR)\Encode
1185 -if exist $(LIBDIR)\Filter\Util rmdir /s /q $(LIBDIR)\Filter\Util
1186 -if exist $(LIBDIR)\Hash rmdir /s /q $(LIBDIR)\Hash
1187 -if exist $(LIBDIR)\App rmdir /s /q $(LIBDIR)\App
1188 -if exist $(LIBDIR)\Module\Pluggable rmdir /s /q $(LIBDIR)\Module\Pluggable
1189 -if exist $(LIBDIR)\TAP rmdir /s /q $(LIBDIR)\TAP
1190 -if exist $(LIBDIR)\mro rmdir /s /q $(LIBDIR)\mro
1191 -if exist $(LIBDIR)\IO\Compress rmdir /s /q $(LIBDIR)\IO\Compress
1192 -if exist $(LIBDIR)\IO\Socket rmdir /s /q $(LIBDIR)\IO\Socket
1193 -if exist $(LIBDIR)\IO\Uncompress rmdir /s /q $(LIBDIR)\IO\Uncompress
1194 -if exist $(LIBDIR)\List rmdir /s /q $(LIBDIR)\List
1195 -if exist $(LIBDIR)\MIME rmdir /s /q $(LIBDIR)\MIME
1196 -if exist $(LIBDIR)\re rmdir /s /q $(LIBDIR)\re
1197 -if exist $(LIBDIR)\Scalar rmdir /s /q $(LIBDIR)\Scalar
1198 -if exist $(LIBDIR)\Sys rmdir /s /q $(LIBDIR)\Sys
1199 -if exist $(LIBDIR)\threads rmdir /s /q $(LIBDIR)\threads
1200 -if exist $(LIBDIR)\XS rmdir /s /q $(LIBDIR)\XS
1201 -if exist $(LIBDIR)\Win32API rmdir /s /q $(LIBDIR)\Win32API
1202 -cd $(PODDIR) && del /f *.html *.bat podchecker \
1203 perlaix.pod perlamiga.pod perlapi.pod perlapollo.pod \
1204 perlbeos.pod perlbs2000.pod perlce.pod perlcn.pod \
1205 perlcygwin.pod perldelta.pod perldgux.pod perldos.pod \
1206 perlepoc.pod perlfreebsd.pod perlhaiku.pod perlhpux.pod \
1207 perlhurd.pod perlintern.pod perlirix.pod perljp.pod perlko.pod \
1208 perllinux.pod perlmachten.pod perlmacos.pod perlmacosx.pod \
1209 perlmint.pod perlmpeix.pod perlnetware.pod perlopenbsd.pod \
1210 perlos2.pod perlos390.pod perlos400.pod perlplan9.pod \
1211 perlqnx.pod perlriscos.pod perlsolaris.pod perlsymbian.pod \
1212 perltoc.pod perltru64.pod perltw.pod perluts.pod perlvmesa.pod \
1213 perlvos.pod perlwin32.pod \
1214 pod2html pod2latex pod2man pod2text pod2usage \
1215 podchecker podselect
1216 -cd ..\utils && del /f h2ph splain perlbug pl2pm c2ph pstruct h2xs \
1217 perldoc perlivp dprofpp libnetcfg enc2xs piconv cpan *.bat \
1218 xsubpp instmodsh prove ptar ptardiff cpanp-run-perl cpanp cpan2dist shasum corelist config_data
1219 -cd ..\x2p && del /f find2perl s2p psed *.bat
1220 -del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c config.h.new \
1223 -del /f ..\lib\Config_git.pl
1226 -del /f $(PERLEXE_ICO) perl.base
1227 -cd .. && del /s *.lib *.map *.pdb *.ilk *.bs *$(o) .exists pm_to_blib
1228 -cd $(EXTDIR) && del /s *.def Makefile Makefile.old
1229 -if exist $(AUTODIR) rmdir /s /q $(AUTODIR)
1230 -if exist $(COREDIR) rmdir /s /q $(COREDIR)
1231 -if exist pod2htmd.tmp del pod2htmd.tmp
1232 -if exist pod2htmi.tmp del pod2htmi.tmp
1233 -if exist $(HTMLDIR) rmdir /s /q $(HTMLDIR)
1234 -del /f ..\t\test_state
1236 install : all installbare installhtml
1239 $(PERLEXE) ..\installperl
1240 if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.*
1241 if exist $(PERLEXESTATIC) $(XCOPY) $(PERLEXESTATIC) $(INST_BIN)\*.*
1242 $(XCOPY) $(GLOBEXE) $(INST_BIN)\*.*
1243 if exist ..\perl*.pdb $(XCOPY) ..\perl*.pdb $(INST_BIN)\*.*
1244 if exist ..\x2p\a2p.pdb $(XCOPY) ..\x2p\a2p.pdb $(INST_BIN)\*.*
1245 $(XCOPY) bin\*.bat $(INST_SCRIPT)\*.*
1248 $(RCOPY) $(HTMLDIR)\*.* $(INST_HTML)\*.*
1250 inst_lib : $(CONFIGPM)
1251 copy splittree.pl ..
1252 $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
1253 $(RCOPY) ..\lib $(INST_LIB)\*.*
1255 $(UNIDATAFILES) : $(MINIPERL) $(CONFIGPM) ..\lib\unicore\mktables
1256 cd ..\lib\unicore && \
1257 ..\$(MINIPERL) -I.. mktables -check $@ $(FIRSTUNIFILE)
1259 minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) utils $(UNIDATAFILES)
1260 $(XCOPY) $(MINIPERL) ..\t\$(NULL)
1261 if exist ..\t\perl.exe del /f ..\t\perl.exe
1262 rename ..\t\miniperl.exe perl.exe
1263 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1266 $(MINIPERL) -I..\lib harness base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t
1268 test-prep : all utils unpack_files
1269 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1270 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1271 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1275 $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
1279 $(MINIPERL) -I..\lib ..\uupacktool.pl -u -d .. -m
1281 cleanup_unpacked_files:
1282 -if exist $(MINIPERL) $(MINIPERL) -I..\lib ..\uupacktool.pl -c -d .. -m
1284 test-reonly : reonly utils
1285 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1286 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1287 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1289 $(PERLEXE) -I..\lib harness $(OPT) -re \bpat\b \breg \bre\b \bsubst \brxcode $(EXTRA)
1297 test-notty : test-prep
1298 set PERL_SKIP_TTY_TEST=1
1300 $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
1304 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1305 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1306 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1308 $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
1312 -@$(DEL) miniperlmain$(o)
1313 -@$(DEL) $(MINIPERL)
1314 -@$(DEL) perlglob$(o)
1315 -@$(DEL) perlmain$(o)
1316 -@$(DEL) perlmainst$(o)
1319 -@$(DEL) ..\git_version.h
1322 -@$(DEL) $(WPERLEXE)
1323 -@$(DEL) $(PERLEXESTATIC)
1324 -@$(DEL) $(PERLSTATICLIB)
1326 -@$(DEL) $(CORE_OBJ)
1327 -@$(DEL) $(GENUUDMAP) $(GENUUDMAP_OBJ) $(UUDMAP_H) $(BITCOUNT_H)
1328 -if exist $(MINIDIR) rmdir /s /q $(MINIDIR)
1329 -if exist $(UNIDATADIR1) rmdir /s /q $(UNIDATADIR1)
1330 -if exist $(UNIDATADIR2) rmdir /s /q $(UNIDATADIR2)
1331 -@$(DEL) $(UNIDATAFILES)
1332 -@$(DEL) $(WIN32_OBJ)
1335 -@$(DEL) ..\*$(o) ..\*.lib ..\*.exp *$(o) *.lib *.exp *.res
1336 -@$(DEL) ..\t\*.exe ..\t\*.dll ..\t\*.bat
1337 -@$(DEL) ..\x2p\*.exe ..\x2p\*.bat
1340 -@$(DEL) Extensions_static
1342 _preclean : cleanup_unpacked_files
1344 clean : _preclean Extensions_clean _clean
1346 realclean : _preclean Extensions_realclean MakePPPort_clean _clean
1348 # Handy way to run perlbug -ok without having to install and run the
1349 # installed perlbug. We don't re-run the tests here - we trust the user.
1350 # Please *don't* use this unless all tests pass.
1351 # If you want to report test failures, use "nmake nok" instead.
1353 $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)"
1356 $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" -F perl.ok
1359 $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)"
1362 $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" -F perl.nok