2 # Makefile to build perl on Windows NT using Microsoft NMAKE.
4 # Visual C++ 2.0 or later
5 # MS Platform SDK 64-bit compiler and tools
7 # This is set up to build a perl.exe that runs off a shared library
8 # (perl59.dll). Also makes individual DLLs for the XS extensions.
12 ## Make sure you read README.win32 *before* you mess with anything here!
16 ## Build configuration. Edit the values below to suit your needs.
20 # Set these to wherever you want "nmake install" to put your
24 INST_TOP = $(INST_DRV)\perl
27 # Comment this out if you DON'T want your perl installation to be versioned.
28 # This means that the new installation will overwrite any files from the
29 # old installation at the same INST_TOP location. Leaving it enabled is
30 # the safest route, as perl adds the extra version directory to all the
31 # locations it installs files to. If you disable it, an alternative
32 # versioned installation can be obtained by setting INST_TOP above to a
33 # path that includes an arbitrary version string.
38 # Comment this out if you DON'T want your perl installation to have
39 # architecture specific components. This means that architecture-
40 # specific files will be installed along with the architecture-neutral
41 # files. Leaving it enabled is safer and more flexible, in case you
42 # want to build multiple flavors of perl and install them together in
43 # the same location. Commenting it out gives you a simpler
44 # installation that is easier to understand for beginners.
46 #INST_ARCH = \$(ARCHNAME)
49 # Uncomment this if you want perl to run
50 # $Config{sitelibexp}\sitecustomize.pl
51 # before anything else. This script can then be set up, for example,
52 # to add additional entries to @INC.
54 #USE_SITECUST = define
57 # uncomment to enable multiple interpreters. This is need for fork()
58 # emulation and for thread support.
63 # Beginnings of interpreter cloning/threads; now reasonably complete.
64 # This should be enabled to get the fork() emulation. This needs
70 # uncomment to enable the implicit "host" layer for all system calls
71 # made by perl. This needs USE_MULTI above. This is also needed to
77 # Comment out next assign to disable perl's I/O subsystem and use compiler's
78 # stdio for IO - depending on your compiler vendor and run time library you may
79 # then get a number of fails from make test i.e. bugs - complain to them not us ;-).
80 # You will also be unable to take full advantage of perl5.8's support for multiple
81 # encodings and may see lower IO performance. You have been warned.
85 # Comment this out if you don't want to enable large file support for
86 # some reason. Should normally only be changed to maintain compatibility
87 # with an older release of perl.
88 USE_LARGE_FILES = define
91 # uncomment exactly one of the following
95 # Visual C++ > 2.x and < 6.x
97 # Visual C++ 6.x (aka Visual C++ 98)
99 # Visual C++ Toolkit 2003 (aka Visual C++ 7.x) (free command-line tools)
101 # Visual C++ .NET 2003 (aka Visual C++ 7.x) (full version)
103 # Visual C++ 2005 Express Edition (aka Visual C++ 8.x) (free version)
105 # Visual C++ 2005 (aka Visual C++ 8.x) (full version)
109 # uncomment next line if you want debug version of perl (big,slow)
110 # If not enabled, we automatically try to use maximum optimization
111 # with all compilers that are known to have a working optimizer.
116 # uncomment to enable use of PerlCRT.DLL when using the Visual C compiler.
117 # It has patches that fix known bugs in older versions of MSVCRT.DLL.
118 # This currently requires VC 5.0 with Service Pack 3 or later.
119 # Get it from CPAN at http://www.cpan.org/authors/id/D/DO/DOUGL/
120 # and follow the directions in the package to install.
122 # Not recommended if you have VC 6.x and you're not running Windows 9x.
124 #USE_PERLCRT = define
127 # uncomment to enable linking with setargv.obj under the Visual C
128 # compiler. Setting this options enables perl to expand wildcards in
129 # arguments, but it may be harder to use alternate methods like
130 # File::DosGlob that are more powerful. This option is supported only with
133 #USE_SETARGV = define
136 # if you want to have the crypt() builtin function implemented, leave this or
137 # CRYPT_LIB uncommented. The fcrypt.c file named here contains a suitable
138 # version of des_fcrypt().
143 # if you didn't set CRYPT_SRC and if you have des_fcrypt() available in a
144 # library, uncomment this, and make sure the library exists (see README.win32)
145 # Specify the full pathname of the library.
147 #CRYPT_LIB = fcrypt.lib
150 # set this if you wish to use perl's malloc
151 # WARNING: Turning this on/off WILL break binary compatibility with extensions
152 # you may have compiled with/without it. Be prepared to recompile all
153 # extensions if you change the default. Currently, this cannot be enabled
154 # if you ask for USE_IMP_SYS above.
156 #PERL_MALLOC = define
159 # set this to enable debugging mstats
160 # This must be enabled to use the Devel::Peek::mstat() function. This cannot
161 # be enabled without PERL_MALLOC as well.
163 #DEBUG_MSTATS = define
166 # set this to additionally provide a statically linked perl-static.exe.
167 # Note that dynamic loading will not work with this perl, so you must
168 # include required modules statically using STATIC_EXT variable below.
169 # A static library perl59s.lib will also be created.
170 # Ordinary perl.exe is not affected by this option.
172 #BUILD_STATIC = define
176 # set the install locations of the compiler include/libraries
177 # Running VCVARS32.BAT is *required* when using Visual C.
178 # Some versions of Visual C don't define MSVCDIR in the environment,
179 # so you may have to set CCHOME explicitly (spaces in the path name should
184 CCINCDIR = $(CCHOME)\include
185 CCLIBDIR = $(CCHOME)\lib
188 # Additional compiler flags can be specified here.
190 BUILDOPT = $(BUILDOPTEXTRA)
193 # Adding -DPERL_HASH_SEED_EXPLICIT will disable randomization of Perl's
194 # internal hash function unless the PERL_HASH_SEED environment variable is set.
195 # Alternatively, adding -DNO_HASH_SEED will completely disable the
196 # randomization feature.
197 # The latter is required to maintain binary compatibility with Perl 5.8.0.
199 #BUILDOPT = $(BUILDOPT) -DPERL_HASH_SEED_EXPLICIT
200 #BUILDOPT = $(BUILDOPT) -DNO_HASH_SEED
203 # This should normally be disabled. Adding -DPERL_POLLUTE enables support
204 # for old symbols by default, at the expense of extreme pollution. You most
205 # probably just want to build modules that won't compile with
206 # perl Makefile.PL POLLUTE=1
207 # instead of enabling this. Please report such modules to the respective
210 #BUILDOPT = $(BUILDOPT) -DPERL_POLLUTE
213 # This should normally be disabled. Enabling it will disable the File::Glob
214 # implementation of CORE::glob.
216 #BUILDOPT = $(BUILDOPT) -DPERL_EXTERNAL_GLOB
219 # This should normally be disabled. Enabling it causes perl to read scripts
220 # in text mode (which is the 5.005 behavior) and will break ByteLoader.
222 #BUILDOPT = $(BUILDOPT) -DPERL_TEXTMODE_SCRIPTS
225 # specify semicolon-separated list of extra directories that modules will
226 # look for libraries (spaces in path names need not be quoted)
231 # set this to your email address (perl will guess a value from
232 # from your loginname and your hostname, which may not be right)
237 ## Build configuration ends.
240 ##################### CHANGE THESE ONLY IF YOU MUST #####################
242 !IF "$(CRYPT_SRC)$(CRYPT_LIB)" == ""
246 CRYPT_FLAG = -DHAVE_DES_FCRYPT
249 !IF "$(USE_IMP_SYS)" == "define"
254 !IF "$(PERL_MALLOC)" == ""
259 !IF "$(DEBUG_MSTATS)" == ""
263 !IF "$(DEBUG_MSTATS)" == "define"
264 BUILDOPT = $(BUILDOPT) -DPERL_DEBUGGING_MSTATS
267 !IF "$(USE_SITECUST)" == ""
271 !IF "$(USE_MULTI)" == ""
275 !IF "$(USE_ITHREADS)" == ""
279 !IF "$(USE_IMP_SYS)" == ""
283 !IF "$(USE_PERLIO)" == ""
287 !IF "$(USE_LARGE_FILES)" == ""
288 USE_LARGE_FILES = undef
291 !IF "$(USE_PERLCRT)" == ""
295 !IF "$(USE_IMP_SYS)$(USE_MULTI)" == "defineundef"
299 !IF "$(USE_ITHREADS)$(USE_MULTI)" == "defineundef"
303 !IF "$(USE_SITECUST)" == "define"
304 BUILDOPT = $(BUILDOPT) -DUSE_SITECUSTOMIZE
307 !IF "$(USE_MULTI)" != "undef"
308 BUILDOPT = $(BUILDOPT) -DPERL_IMPLICIT_CONTEXT
311 !IF "$(USE_IMP_SYS)" != "undef"
312 BUILDOPT = $(BUILDOPT) -DPERL_IMPLICIT_SYS
315 !IF "$(PROCESSOR_ARCHITECTURE)" == ""
316 PROCESSOR_ARCHITECTURE = x86
320 # When we are running from a 32bit cmd.exe on AMD64 then
321 # PROCESSOR_ARCHITECTURE is set to x86 and PROCESSOR_ARCHITEW6432
323 !IF "$(PROCESSOR_ARCHITEW6432)" != ""
324 PROCESSOR_ARCHITECTURE = $(PROCESSOR_ARCHITEW6432)
327 !IF "$(PROCESSOR_ARCHITECTURE)" == "AMD64" || "$(PROCESSOR_ARCHITECTURE)" == "IA64"
335 ARCHITECTURE = $(PROCESSOR_ARCHITECTURE)
336 !IF "$(ARCHITECTURE)" == "AMD64"
339 !IF "$(ARCHITECTURE)" == "IA64"
343 !IF "$(USE_MULTI)" == "define"
344 ARCHNAME = MSWin32-$(ARCHITECTURE)-multi
346 !IF "$(USE_PERLIO)" == "define"
347 ARCHNAME = MSWin32-$(ARCHITECTURE)-perlio
349 ARCHNAME = MSWin32-$(ARCHITECTURE)
353 !IF "$(USE_PERLIO)" == "define"
354 BUILDOPT = $(BUILDOPT) -DUSE_PERLIO
357 !IF "$(USE_ITHREADS)" == "define"
358 ARCHNAME = $(ARCHNAME)-thread
361 # Visual C++ 98, .NET 2003 and 2005 specific.
362 # VC++ 6.x, 7.x and 8.x can load DLL's on demand. Makes the test suite run in
363 # about 10% less time. (The free version of 7.x can't do this, but the free
364 # version of 8.x can.)
365 !IF "$(CCTYPE)" == "MSVC60" || "$(CCTYPE)" == "MSVC70" || \
366 "$(CCTYPE)" == "MSVC80" || "$(CCTYPE)" == "MSVC80FREE"
367 DELAYLOAD = -DELAYLOAD:ws2_32.dll -DELAYLOAD:shell32.dll delayimp.lib
370 # Visual C++ 2005 (VC++ 8.x) creates manifest files for EXEs and DLLs. These
371 # either need copying everywhere with the binaries, or else need embedding in
372 # them otherwise MSVCR80.dll won't be found. Embed them for simplicity, and
373 # delete them afterwards so that they don't get installed too.
374 !IF "$(CCTYPE)" == "MSVC80" || "$(CCTYPE)" == "MSVC80FREE"
375 EMBED_EXE_MANI = mt -nologo -manifest $@.manifest -outputresource:$@;1 && \
377 EMBED_DLL_MANI = mt -nologo -manifest $@.manifest -outputresource:$@;2 && \
381 ARCHDIR = ..\lib\$(ARCHNAME)
382 COREDIR = ..\lib\CORE
383 AUTODIR = ..\lib\auto
387 EXTUTILSDIR = $(LIBDIR)\ExtUtils
391 INST_SCRIPT = $(INST_TOP)$(INST_VER)\bin
392 INST_BIN = $(INST_SCRIPT)$(INST_ARCH)
393 INST_LIB = $(INST_TOP)$(INST_VER)\lib
394 INST_ARCHLIB = $(INST_LIB)$(INST_ARCH)
395 INST_COREDIR = $(INST_ARCHLIB)\CORE
396 INST_HTML = $(INST_TOP)$(INST_VER)\html
399 # Programs to compile, build .lib files and link
404 LIB32 = $(LINK32) -lib
411 INCLUDES = -I$(COREDIR) -I.\include -I. -I..
412 #PCHFLAGS = -Fpc:\temp\vcmoduls.pch -YX
413 DEFINES = -DWIN32 -D_CONSOLE -DNO_STRICT $(CRYPT_FLAG)
414 LOCDEFS = -DPERLDLL -DPERL_CORE
418 !IF "$(USE_PERLCRT)" != "define"
424 !IF "$(CFG)" == "Debug"
425 ! IF "$(CCTYPE)" == "MSVC20"
426 OPTIMIZE = -Od -MD -Z7 -DDEBUGGING
428 OPTIMIZE = -Od -MD -Zi -DDEBUGGING
432 OPTIMIZE = -MD -Zi -DNDEBUG
433 # we enable debug symbols in release builds also
434 LINK_DBG = -debug -opt:ref,icf
435 # you may want to enable this if you want COFF symbols in the executables
436 # in addition to the PDB symbols. The default Dr. Watson that ships with
437 # Windows can use the the former but not latter. The free WinDbg can be
438 # installed to get better stack traces from just the PDB symbols, so we
439 # avoid the bloat of COFF symbols by default.
440 #LINK_DBG = $(LINK_DBG) -debugtype:both
441 ! IF "$(WIN64)" == "define"
442 # enable Whole Program Optimizations (WPO) and Link Time Code Generation (LTCG)
443 OPTIMIZE = $(OPTIMIZE) -Ox -GL
444 LINK_DBG = $(LINK_DBG) -ltcg
446 # -O1 yields smaller code, which turns out to be faster than -O2 on x86
447 OPTIMIZE = $(OPTIMIZE) -O1
448 #OPTIMIZE = $(OPTIMIZE) -O2
452 !IF "$(WIN64)" == "define"
453 DEFINES = $(DEFINES) -DWIN64 -DCONSERVATIVE
454 OPTIMIZE = $(OPTIMIZE) -Wp64 -fp:precise
457 # For now, silence VC++ 8.x's warnings about "unsafe" CRT functions and POSIX
458 # CRT function names being deprecated.
459 !IF "$(CCTYPE)" == "MSVC80" || "$(CCTYPE)" == "MSVC80FREE"
460 DEFINES = $(DEFINES) -D_CRT_SECURE_NO_DEPRECATE -wd4996
463 # Use the MSVCRT read() fix if the PerlCRT was not chosen, but only when using
464 # VC++ 6.x or earlier. Later versions use MSVCR70.dll, MSVCR71.dll, etc, which
465 # do not require the fix.
466 !IF "$(CCTYPE)" == "MSVC20" || "$(CCTYPE)" == "MSVC" || "$(CCTYPE)" == "MSVC60"
467 ! IF "$(USE_PERLCRT)" != "define"
468 BUILDOPT = $(BUILDOPT) -DPERL_MSVCRT_READFIX
472 LIBBASEFILES = $(CRYPT_LIB) \
473 oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \
474 comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \
475 netapi32.lib uuid.lib ws2_32.lib mpr.lib winmm.lib \
476 version.lib odbc32.lib odbccp32.lib
478 # The 64 bit Platform SDK compilers contain a runtime library that doesn't
479 # include the buffer overrun verification code used by the /GS switch.
480 # Since the code links against libraries that are compiled with /GS, this
481 # "security cookie verification" must be included via bufferoverlow.lib.
482 !IF "$(WIN64)" == "define"
483 LIBBASEFILES = $(LIBBASEFILES) bufferoverflowU.lib
486 # we add LIBC here, since we may be using PerlCRT.dll
487 LIBFILES = $(LIBBASEFILES) $(LIBC)
489 #EXTRACFLAGS = -nologo -GF -W4 -wd4127 -wd4706
490 EXTRACFLAGS = -nologo -GF -W3
491 CFLAGS = $(EXTRACFLAGS) $(INCLUDES) $(DEFINES) $(LOCDEFS) \
492 $(PCHFLAGS) $(OPTIMIZE)
493 LINK_FLAGS = -nologo -nodefaultlib $(LINK_DBG) \
494 -libpath:"$(INST_COREDIR)" \
495 -machine:$(PROCESSOR_ARCHITECTURE)
500 CFLAGS_O = $(CFLAGS) $(BUILDOPT)
502 #################### do not edit below this line #######################
503 ############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ##############
511 .SUFFIXES : .c $(o) .dll .lib .exe .rc .res
514 $(CC) -c -I$(<D) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $<
520 $(LINK32) -dll -subsystem:windows -implib:$(*B).lib -def:$(*B).def \
521 -out:$@ $(LINK_FLAGS) $(LIBFILES) $< $(LIBPERL)
530 # makedef.pl must be updated if this changes, and this should normally
531 # only change when there is an incompatible revision of the public API.
532 PERLIMPLIB = ..\perl59.lib
533 PERLSTATICLIB = ..\perl59s.lib
534 PERLDLL = ..\perl59.dll
536 MINIPERL = ..\miniperl.exe
538 PERLEXE = ..\perl.exe
539 WPERLEXE = ..\wperl.exe
540 PERLEXESTATIC = ..\perl-static.exe
541 GLOBEXE = ..\perlglob.exe
542 CONFIGPM = ..\lib\Config.pm ..\lib\Config_heavy.pl
543 MINIMOD = ..\lib\ExtUtils\Miniperl.pm
545 GENUUDMAP = ..\generate_uudmap.exe
546 !IF "$(BUILD_STATIC)" == "define"
552 # Unicode data files generated by mktables
553 FIRSTUNIFILE = ..\lib\unicore\Canonical.pl
554 UNIDATAFILES = ..\lib\unicore\Canonical.pl ..\lib\unicore\Exact.pl \
555 ..\lib\unicore\Properties ..\lib\unicore\Decomposition.pl \
556 ..\lib\unicore\CombiningClass.pl ..\lib\unicore\Name.pl \
557 ..\lib\unicore\PVA.pl
559 # Directories of Unicode data files generated by mktables
560 UNIDATADIR1 = ..\lib\unicore\To
561 UNIDATADIR2 = ..\lib\unicore\lib
563 PERLEXE_ICO = .\perlexe.ico
564 PERLEXE_RES = .\perlexe.res
567 # Nominate a target which causes extensions to be re-built
568 # This used to be $(PERLEXE), but at worst it is the .dll that they depend
569 # on and really only the interface - i.e. the .def file used to export symbols
571 PERLDEP = perldll.def
573 PL2BAT = bin\pl2bat.pl
574 GLOBBAT = bin\perlglob.bat
590 ..\utils\config_data \
597 ..\utils\cpanp-run-perl \
622 !IF "$(WIN64)" == "define"
623 CFGSH_TMPL = config.vc64
624 CFGH_TMPL = config_H.vc64
626 CFGSH_TMPL = config.vc
627 CFGH_TMPL = config_H.vc
630 XCOPY = xcopy /f /r /i /d /y
631 RCOPY = xcopy /f /r /i /e /d /y
638 # filenames given to xsubpp must have forward slashes (since it puts
639 # full pathnames in #line strings)
640 XSUBPP = ..\$(MINIPERL) -I..\..\lib ..\$(EXTUTILSDIR)\xsubpp \
681 EXTRACORE_SRC = $(EXTRACORE_SRC) perllib.c
683 !IF "$(PERL_MALLOC)" == "define"
684 EXTRACORE_SRC = $(EXTRACORE_SRC) ..\malloc.c
687 EXTRACORE_SRC = $(EXTRACORE_SRC) ..\perlio.c
694 # We need this for miniperl build unless we override canned
695 # config.h #define building mini\*
696 #!IF "$(USE_PERLIO)" == "define"
697 WIN32_SRC = $(WIN32_SRC) .\win32io.c
700 !IF "$(CRYPT_SRC)" != ""
701 WIN32_SRC = $(WIN32_SRC) .\$(CRYPT_SRC)
704 DLL_SRC = $(DYNALOADER).c
751 .\include\sys\socket.h \
754 CORE_H = $(CORE_NOCFG_H) .\config.h
756 UUDMAP_H = ..\uudmap.h
758 MICROCORE_OBJ = $(MICROCORE_SRC:.c=.obj)
759 CORE_OBJ = $(MICROCORE_OBJ) $(EXTRACORE_SRC:.c=.obj)
760 WIN32_OBJ = $(WIN32_SRC:.c=.obj)
761 MINICORE_OBJ = $(MICROCORE_OBJ:..\=.\mini\) \
762 $(MINIDIR)\miniperlmain$(o) \
763 $(MINIDIR)\perlio$(o)
764 MINIWIN32_OBJ = $(WIN32_OBJ:.\=.\mini\)
765 MINI_OBJ = $(MINICORE_OBJ) $(MINIWIN32_OBJ)
766 DLL_OBJ = $(DLL_SRC:.c=.obj)
767 X2P_OBJ = $(X2P_SRC:.c=.obj)
768 GENUUDMAP_OBJ = $(GENUUDMAP:.exe=.obj)
770 PERLDLL_OBJ = $(CORE_OBJ)
771 PERLEXE_OBJ = perlmain$(o)
772 PERLEXEST_OBJ = perlmainst$(o)
774 PERLDLL_OBJ = $(PERLDLL_OBJ) $(WIN32_OBJ) $(DLL_OBJ)
776 !IF "$(USE_SETARGV)" != ""
777 SETARGV_OBJ = setargv$(o)
780 # specify static extensions here
781 #STATIC_EXT = Cwd Compress/Raw/Zlib
782 STATIC_EXT = Win32CORE
784 DYNALOADER = $(EXTDIR)\DynaLoader\DynaLoader
787 "INST_DRV=$(INST_DRV)" \
788 "INST_TOP=$(INST_TOP)" \
789 "INST_VER=$(INST_VER)" \
790 "INST_ARCH=$(INST_ARCH)" \
791 "archname=$(ARCHNAME)" \
794 "ccflags=$(EXTRACFLAGS) $(OPTIMIZE:"=\") $(DEFINES) $(BUILDOPT)" \
795 "cf_email=$(EMAIL)" \
796 "d_crypt=$(D_CRYPT)" \
797 "d_mymalloc=$(PERL_MALLOC)" \
799 "incpath=$(CCINCDIR:"=\")" \
800 "libperl=$(PERLIMPLIB:..\=)" \
801 "libpth=$(CCLIBDIR:"=\");$(EXTRALIBDIRS:"=\")" \
803 "make=$(MAKE_BARE)" \
804 "static_ext=$(STATIC_EXT)" \
805 "usethreads=$(USE_ITHREADS)" \
806 "useithreads=$(USE_ITHREADS)" \
807 "usemultiplicity=$(USE_MULTI)" \
808 "useperlio=$(USE_PERLIO)" \
809 "uselargefiles=$(USE_LARGE_FILES)" \
810 "usesitecustomize=$(USE_SITECUST)" \
811 "LINK_FLAGS=$(LINK_FLAGS:"=\")" \
812 "optimize=$(OPTIMIZE:"=\")"
818 all : .\config.h $(GLOBEXE) $(MINIMOD) $(CONFIGPM) $(UNIDATAFILES) $(PERLEXE) \
819 $(X2P) MakePPPort Extensions $(PERLSTATIC)
820 @echo Everything is up to date. '$(MAKE_BARE) test' to run test suite.
822 ..\regnodes.h : ..\regcomp.sym
827 ..\regcharclass.h : ..\Porting\regcharclass.pl
829 Porting\regcharclass.pl
832 regnodes : ..\regnodes.h
834 ..\regcomp$(o) : ..\regnodes.h ..\regcharclass.h
836 ..\regexec$(o) : ..\regnodes.h ..\regcharclass.h
838 reonly : regnodes .\config.h $(GLOBEXE) $(MINIMOD) $(CONFIGPM) $(UNIDATAFILES) \
839 $(PERLEXE) $(X2P) Extensions_reonly
840 @echo Perl and 're' are up to date.
842 $(DYNALOADER)$(o) : $(DYNALOADER).c $(CORE_H) $(EXTDIR)\DynaLoader\dlutils.c
844 static: $(PERLEXESTATIC)
846 #------------------------------------------------------------
848 $(GLOBEXE) : perlglob$(o)
849 $(LINK32) $(LINK_FLAGS) $(LIBFILES) -out:$@ -subsystem:$(SUBSYS) \
850 perlglob$(o) setargv$(o)
853 perlglob$(o) : perlglob.c
855 config.w32 : $(CFGSH_TMPL)
856 copy $(CFGSH_TMPL) config.w32
858 .\config.h : $(CFGH_TMPL)
860 copy $(CFGH_TMPL) config.h
862 ..\config.sh : config.w32 $(MINIPERL) config_sh.PL
863 $(MINIPERL) -I..\lib config_sh.PL $(CFG_VARS) config.w32 > ..\config.sh
865 # this target is for when changes to the main config.sh happen
866 # edit config.{b,v,g}c and make this target once for each supported
867 # compiler (e.g. `nmake CCTYPE=BORLAND regen_config_h`)
869 perl config_sh.PL $(CFG_VARS) $(CFGSH_TMPL) > ..\config.sh
871 -del /f perl.exe perl*.dll
876 -perl config_h.PL "INST_VER=$(INST_VER)"
877 rename config.h $(CFGH_TMPL)
879 $(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl
883 if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL)
884 $(XCOPY) ..\*.h $(COREDIR)\*.*
885 $(XCOPY) *.h $(COREDIR)\*.*
886 $(XCOPY) ..\ext\re\re.pm $(LIBDIR)\*.*
887 $(RCOPY) include $(COREDIR)\*.*
888 -$(MINIPERL) -I..\lib config_h.PL "INST_VER=$(INST_VER)"
889 if errorlevel 1 $(MAKE) /$(MAKEFLAGS) $(CONFIGPM)
891 $(MINIPERL) : $(MINIDIR) $(MINI_OBJ)
892 $(LINK32) -subsystem:console -out:$@ @<<
893 $(LINK_FLAGS) $(LIBFILES) $(MINI_OBJ)
898 if not exist "$(MINIDIR)" mkdir "$(MINIDIR)"
900 $(MINICORE_OBJ) : $(CORE_NOCFG_H)
901 $(CC) -c $(CFLAGS) -DPERL_EXTERNAL_GLOB $(OBJOUT_FLAG)$@ ..\$(*F).c
903 $(MINIWIN32_OBJ) : $(CORE_NOCFG_H)
904 $(CC) -c $(CFLAGS) $(OBJOUT_FLAG)$@ $(*F).c
906 # -DPERL_IMPLICIT_SYS needs C++ for perllib.c
907 # This is the only file that depends on perlhost.h, vmem.h, and vdir.h
908 !IF "$(USE_IMP_SYS)" == "define"
909 perllib$(o) : perllib.c .\perlhost.h .\vdir.h .\vmem.h
910 $(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c
913 # 1. we don't want to rebuild miniperl.exe when config.h changes
914 # 2. we don't want to rebuild miniperl.exe with non-default config.h
915 $(MINI_OBJ) : $(CORE_NOCFG_H)
917 $(WIN32_OBJ) : $(CORE_H)
918 $(CORE_OBJ) : $(CORE_H)
919 $(DLL_OBJ) : $(CORE_H)
920 $(X2P_OBJ) : $(CORE_H)
922 perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym ..\pp.sym ..\makedef.pl
923 $(MINIPERL) -I..\lib buildext.pl --create-perllibst-h
924 $(MINIPERL) -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) $(BUILDOPT) \
925 CCTYPE=$(CCTYPE) > perldll.def
927 $(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES) Extensions_static
928 $(LINK32) -dll -def:perldll.def -base:0x28000000 -out:$@ @Extensions_static @<<
929 $(LINK_FLAGS) $(DELAYLOAD) $(LIBFILES) $(PERLDLL_OBJ) $(PERLDLL_RES)
932 $(XCOPY) $(PERLIMPLIB) $(COREDIR)
934 $(PERLSTATICLIB): Extensions_static
935 $(LIB32) $(LIB_FLAGS) -out:$@ @Extensions_static @<<
938 $(XCOPY) $(PERLSTATICLIB) $(COREDIR)
940 $(PERLEXE_ICO): $(MINIPERL) ..\uupacktool.pl $(PERLEXE_ICO).packd
941 $(MINIPERL) -I..\lib ..\uupacktool.pl -u $(PERLEXE_ICO).packd $(PERLEXE_ICO)
943 $(PERLEXE_RES): perlexe.rc $(PERLEXE_ICO)
945 $(MINIMOD) : $(MINIPERL) ..\minimod.pl
947 miniperl minimod.pl > lib\ExtUtils\Miniperl.pm
950 ..\x2p\a2p$(o) : ..\x2p\a2p.c
951 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\a2p.c
953 ..\x2p\hash$(o) : ..\x2p\hash.c
954 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\hash.c
956 ..\x2p\str$(o) : ..\x2p\str.c
957 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\str.c
959 ..\x2p\util$(o) : ..\x2p\util.c
960 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\util.c
962 ..\x2p\walk$(o) : ..\x2p\walk.c
963 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\walk.c
965 $(X2P) : $(MINIPERL) $(X2P_OBJ)
966 $(MINIPERL) ..\x2p\find2perl.PL
967 $(MINIPERL) ..\x2p\s2p.PL
968 $(LINK32) -subsystem:console -out:$@ @<<
969 $(LINK_FLAGS) $(LIBFILES) $(X2P_OBJ)
973 $(MINIDIR)\globals$(o) : $(UUDMAP_H)
975 $(UUDMAP_H) : $(GENUUDMAP)
976 $(GENUUDMAP) >$(UUDMAP_H)
978 $(GENUUDMAP) : $(GENUUDMAP_OBJ)
979 $(LINK32) -subsystem:console -out:$@ @<<
980 $(LINK_FLAGS) $(LIBFILES) $(GENUUDMAP_OBJ)
984 perlmain.c : runperl.c
985 copy runperl.c perlmain.c
987 perlmain$(o) : perlmain.c
988 $(CC) $(CFLAGS_O) -UPERLDLL $(OBJOUT_FLAG)$@ -c perlmain.c
990 perlmainst.c : runperl.c
991 copy runperl.c perlmainst.c
993 perlmainst$(o) : perlmainst.c
994 $(CC) $(CFLAGS_O) -DPERLDLL $(OBJOUT_FLAG)$@ -c perlmainst.c
996 $(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES)
997 $(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(LINK_FLAGS) \
998 $(LIBFILES) $(PERLEXE_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB) $(PERLEXE_RES)
1000 copy $(PERLEXE) $(WPERLEXE)
1001 $(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS
1002 copy splittree.pl ..
1003 $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
1005 $(PERLEXESTATIC): $(PERLSTATICLIB) $(CONFIGPM) $(PERLEXEST_OBJ) $(PERLEXE_RES)
1006 $(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(LINK_FLAGS) \
1007 @Extensions_static $(PERLSTATICLIB) \
1008 $(LIBFILES) $(PERLEXEST_OBJ) $(SETARGV_OBJ) $(PERLEXE_RES)
1011 $(DYNALOADER).c: $(MINIPERL) $(EXTDIR)\DynaLoader\dl_win32.xs $(CONFIGPM)
1012 if not exist $(AUTODIR) mkdir $(AUTODIR)
1014 ..\$(MINIPERL) -I..\..\lib $(*B)_pm.PL
1015 ..\$(MINIPERL) -I..\..\lib XSLoader_pm.PL
1017 $(XCOPY) $(EXTDIR)\$(*B)\$(*B).pm $(LIBDIR)\$(NULL)
1018 $(XCOPY) $(EXTDIR)\$(*B)\XSLoader.pm $(LIBDIR)\$(NULL)
1020 $(XSUBPP) dl_win32.xs > $(*B).c
1023 $(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs
1024 copy dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs
1026 MakePPPort: $(MINIPERL) $(CONFIGPM)
1027 $(MINIPERL) -I..\lib ..\mkppport
1030 -if exist $(MINIPERL) $(MINIPERL) -I..\lib ..\mkppport --clean
1032 #-------------------------------------------------------------------------------
1033 Extensions: buildext.pl $(PERLDEP) $(CONFIGPM)
1034 $(XCOPY) ..\*.h $(COREDIR)\*.*
1035 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) --dynamic
1036 -if exist ext $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext --dynamic
1038 Extensions_reonly: buildext.pl $(PERLDEP) $(CONFIGPM)
1039 $(XCOPY) ..\*.h $(COREDIR)\*.*
1040 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) --dynamic +re
1041 -if exist ext $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext --dynamic +re
1043 Extensions_static : buildext.pl $(PERLDEP) $(CONFIGPM)
1044 $(XCOPY) ..\*.h $(COREDIR)\*.*
1045 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) --static
1046 -if exist ext $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext --static
1047 $(MINIPERL) -I..\lib buildext.pl --list-static-libs > Extensions_static
1050 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) clean
1051 -if exist $(MINIPERL) if exist ext $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext clean
1053 Extensions_realclean:
1054 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) realclean
1055 -if exist $(MINIPERL) if exist ext $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext realclean
1057 #-------------------------------------------------------------------------------
1060 $(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=$(HTMLDIR) \
1061 --podpath=pod:lib:ext:utils --htmlroot="file://$(INST_HTML::=|)" \
1062 --libpod=perlfunc:perlguts:perlvar:perlrun:perlop --recurse
1064 # Note that this next section is parsed (and regenerated) by pod/buildtoc
1065 # so please check that script before making structural changes here
1067 utils: $(PERLEXE) $(X2P)
1069 $(MAKE) PERL=$(MINIPERL)
1071 copy ..\vms\perlvms.pod .\perlvms.pod
1072 copy ..\README.aix ..\pod\perlaix.pod
1073 copy ..\README.amiga ..\pod\perlamiga.pod
1074 copy ..\README.apollo ..\pod\perlapollo.pod
1075 copy ..\README.beos ..\pod\perlbeos.pod
1076 copy ..\README.bs2000 ..\pod\perlbs2000.pod
1077 copy ..\README.ce ..\pod\perlce.pod
1078 copy ..\README.cn ..\pod\perlcn.pod
1079 copy ..\README.cygwin ..\pod\perlcygwin.pod
1080 copy ..\README.dgux ..\pod\perldgux.pod
1081 copy ..\README.dos ..\pod\perldos.pod
1082 copy ..\README.epoc ..\pod\perlepoc.pod
1083 copy ..\README.freebsd ..\pod\perlfreebsd.pod
1084 copy ..\README.hpux ..\pod\perlhpux.pod
1085 copy ..\README.hurd ..\pod\perlhurd.pod
1086 copy ..\README.irix ..\pod\perlirix.pod
1087 copy ..\README.jp ..\pod\perljp.pod
1088 copy ..\README.ko ..\pod\perlko.pod
1089 copy ..\README.linux ..\pod\perllinux.pod
1090 copy ..\README.machten ..\pod\perlmachten.pod
1091 copy ..\README.macos ..\pod\perlmacos.pod
1092 copy ..\README.macosx ..\pod\perlmacosx.pod
1093 copy ..\README.mint ..\pod\perlmint.pod
1094 copy ..\README.mpeix ..\pod\perlmpeix.pod
1095 copy ..\README.netware ..\pod\perlnetware.pod
1096 copy ..\README.openbsd ..\pod\perlopenbsd.pod
1097 copy ..\README.os2 ..\pod\perlos2.pod
1098 copy ..\README.os390 ..\pod\perlos390.pod
1099 copy ..\README.os400 ..\pod\perlos400.pod
1100 copy ..\README.plan9 ..\pod\perlplan9.pod
1101 copy ..\README.qnx ..\pod\perlqnx.pod
1102 copy ..\README.riscos ..\pod\perlriscos.pod
1103 copy ..\README.solaris ..\pod\perlsolaris.pod
1104 copy ..\README.symbian ..\pod\perlsymbian.pod
1105 copy ..\README.tru64 ..\pod\perltru64.pod
1106 copy ..\README.tw ..\pod\perltw.pod
1107 copy ..\README.uts ..\pod\perluts.pod
1108 copy ..\README.vmesa ..\pod\perlvmesa.pod
1109 copy ..\README.vms ..\pod\perlvms.pod
1110 copy ..\README.vos ..\pod\perlvos.pod
1111 copy ..\README.win32 ..\pod\perlwin32.pod
1112 copy ..\pod\perl595delta.pod ..\pod\perldelta.pod
1113 $(MAKE) -f ..\win32\pod.mak converters
1115 $(PERLEXE) lib_pm.PL
1117 $(PERLEXE) $(PL2BAT) $(UTILS)
1119 # Note that the pod cleanup in this next section is parsed (and regenerated
1120 # by pod/buildtoc so please check that script before making changes here
1122 distclean: realclean
1123 -del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \
1124 $(PERLIMPLIB) ..\miniperl.lib $(MINIMOD) \
1125 $(PERLEXESTATIC) $(PERLSTATICLIB)
1127 -del /f $(DYNALOADER).c
1128 -del /f $(EXTDIR)\DynaLoader\dl_win32.xs
1129 -del /f $(EXTDIR)\DynaLoader\DynaLoader.pm
1130 -del /f $(EXTDIR)\DynaLoader\XSLoader.pm
1131 -del /f $(LIBDIR)\Encode.pm $(LIBDIR)\encoding.pm $(LIBDIR)\Errno.pm
1132 -del /f $(LIBDIR)\Config.pod $(LIBDIR)\POSIX.pod $(LIBDIR)\threads.pm
1133 -del /f $(LIBDIR)\.exists $(LIBDIR)\attrs.pm $(LIBDIR)\DynaLoader.pm
1134 -del /f $(LIBDIR)\XSLoader.pm $(LIBDIR)\lib.pm
1135 -del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm
1136 -del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm
1137 -del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm
1138 -del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm
1139 -del /f $(LIBDIR)\Devel\Peek.pm $(LIBDIR)\Devel\DProf.pm
1140 -del /f $(LIBDIR)\Devel\PPPort.pm
1141 -del /f $(LIBDIR)\File\Glob.pm
1142 -del /f $(LIBDIR)\Storable.pm
1143 -del /f $(LIBDIR)\Digest\MD5.pm
1144 -del /f $(LIBDIR)\Digest\SHA.pm
1145 -del /f $(LIBDIR)\PerlIO\encoding.pm
1146 -del /f $(LIBDIR)\PerlIO\scalar.pm
1147 -del /f $(LIBDIR)\PerlIO\via.pm
1148 -del /f $(LIBDIR)\Sys\Hostname.pm
1149 -del /f $(LIBDIR)\Thread\Signal.pm $(LIBDIR)\Thread\Specific.pm
1150 -del /f $(LIBDIR)\threads\shared.pm
1151 -del /f $(LIBDIR)\Time\HiRes.pm
1152 -del /f $(LIBDIR)\Unicode\Normalize.pm
1153 -del /f $(LIBDIR)\Math\BigInt\FastCalc.pm
1154 -del /f $(LIBDIR)\Win32.pm
1155 -del /f $(LIBDIR)\Win32CORE.pm
1156 -del /f $(LIBDIR)\Win32API\File.pm
1157 -del /f $(LIBDIR)\Win32API\File\cFile.pc
1158 -if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B
1159 -if exist $(LIBDIR)\Compress rmdir /s /q $(LIBDIR)\Compress
1160 -if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data
1161 -if exist $(LIBDIR)\Encode rmdir /s /q $(LIBDIR)\Encode
1162 -if exist $(LIBDIR)\Filter\Util rmdir /s /q $(LIBDIR)\Filter\Util
1163 -if exist $(LIBDIR)\Hash rmdir /s /q $(LIBDIR)\Hash
1164 -if exist $(LIBDIR)\IO\Compress rmdir /s /q $(LIBDIR)\IO\Compress
1165 -if exist $(LIBDIR)\IO\Socket rmdir /s /q $(LIBDIR)\IO\Socket
1166 -if exist $(LIBDIR)\IO\Uncompress rmdir /s /q $(LIBDIR)\IO\Uncompress
1167 -if exist $(LIBDIR)\List rmdir /s /q $(LIBDIR)\List
1168 -if exist $(LIBDIR)\MIME rmdir /s /q $(LIBDIR)\MIME
1169 -if exist $(LIBDIR)\re rmdir /s /q $(LIBDIR)\re
1170 -if exist $(LIBDIR)\Scalar rmdir /s /q $(LIBDIR)\Scalar
1171 -if exist $(LIBDIR)\Sys rmdir /s /q $(LIBDIR)\Sys
1172 -if exist $(LIBDIR)\threads rmdir /s /q $(LIBDIR)\threads
1173 -if exist $(LIBDIR)\XS rmdir /s /q $(LIBDIR)\XS
1174 -if exist $(LIBDIR)\Win32API rmdir /s /q $(LIBDIR)\Win32API
1175 -cd $(PODDIR) && del /f *.html *.bat checkpods \
1176 perlaix.pod perlamiga.pod perlapollo.pod perlbeos.pod \
1177 perlbs2000.pod perlce.pod perlcn.pod perlcygwin.pod \
1178 perldelta.pod perldgux.pod perldos.pod perlepoc.pod \
1179 perlfreebsd.pod perlhpux.pod perlhurd.pod perlirix.pod \
1180 perljp.pod perlko.pod perllinux.pod perlmachten.pod \
1181 perlmacos.pod perlmacosx.pod perlmint.pod perlmpeix.pod \
1182 perlnetware.pod perlopenbsd.pod perlos2.pod perlos390.pod \
1183 perlos400.pod perlplan9.pod perlqnx.pod perlriscos.pod \
1184 perlsolaris.pod perlsymbian.pod perltru64.pod perltw.pod \
1185 perluts.pod perlvmesa.pod perlvms.pod perlvms.pod perlvos.pod \
1187 pod2html pod2latex pod2man pod2text pod2usage \
1188 podchecker podselect
1189 -cd ..\utils && del /f h2ph splain perlbug pl2pm c2ph pstruct h2xs \
1190 perldoc perlivp dprofpp libnetcfg enc2xs piconv cpan *.bat \
1191 xsubpp instmodsh prove ptar ptardiff cpanp-run-perl cpanp cpan2dist shasum corelist config_data
1192 -cd ..\x2p && del /f find2perl s2p psed *.bat
1193 -del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c config.h.new \
1198 -del /f $(PERLEXE_ICO) perl.base
1199 ren ..\lib\Net\Changes.libnet Changes.tenbil
1200 ren ..\lib\Net\README.libnet README.tenbil
1201 -cd .. && del /s *.lib *.map *.pdb *.ilk *.bs *$(o) .exists pm_to_blib
1202 ren ..\lib\Net\Changes.tenbil Changes.libnet
1203 ren ..\lib\Net\README.tenbil README.libnet
1204 -cd $(EXTDIR) && del /s *.def Makefile Makefile.old
1205 -if exist $(AUTODIR) rmdir /s /q $(AUTODIR)
1206 -if exist $(COREDIR) rmdir /s /q $(COREDIR)
1207 -if exist pod2htmd.tmp del pod2htmd.tmp
1208 -if exist pod2htmi.tmp del pod2htmi.tmp
1209 -if exist $(HTMLDIR) rmdir /s /q $(HTMLDIR)
1211 install : all installbare installhtml
1214 $(PERLEXE) ..\installperl
1215 if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.*
1216 if exist $(PERLEXESTATIC) $(XCOPY) $(PERLEXESTATIC) $(INST_BIN)\*.*
1217 $(XCOPY) $(GLOBEXE) $(INST_BIN)\*.*
1218 if exist ..\perl*.pdb $(XCOPY) ..\perl*.pdb $(INST_BIN)\*.*
1219 if exist ..\x2p\a2p.pdb $(XCOPY) ..\x2p\a2p.pdb $(INST_BIN)\*.*
1220 $(XCOPY) bin\*.bat $(INST_SCRIPT)\*.*
1223 $(RCOPY) $(HTMLDIR)\*.* $(INST_HTML)\*.*
1225 inst_lib : $(CONFIGPM)
1226 copy splittree.pl ..
1227 $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
1228 $(RCOPY) ..\lib $(INST_LIB)\*.*
1230 $(UNIDATAFILES) : $(MINIPERL) $(CONFIGPM) ..\lib\unicore\mktables
1231 cd ..\lib\unicore && \
1232 ..\$(MINIPERL) -I.. mktables -check $@ $(FIRSTUNIFILE)
1234 minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) utils $(UNIDATAFILES)
1235 $(XCOPY) $(MINIPERL) ..\t\$(NULL)
1236 if exist ..\t\perl.exe del /f ..\t\perl.exe
1237 rename ..\t\miniperl.exe perl.exe
1238 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1241 $(MINIPERL) -I..\lib harness base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t
1243 test-prep : all utils unpack_files
1244 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1245 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1246 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1250 $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
1254 $(MINIPERL) -I..\lib ..\uupacktool.pl -u -d .. -m
1256 cleanup_unpacked_files:
1257 -if exist $(MINIPERL) $(MINIPERL) -I..\lib ..\uupacktool.pl -c -d .. -m
1259 test-reonly : reonly utils
1260 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1261 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1262 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1264 $(PERLEXE) -I..\lib harness $(OPT) -re \bpat\b \breg \bre\b \bsubst \brxcode $(EXTRA)
1272 test-notty : test-prep
1273 set PERL_SKIP_TTY_TEST=1
1275 $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
1279 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1280 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1281 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1283 $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
1287 -@$(DEL) miniperlmain$(o)
1288 -@$(DEL) $(MINIPERL)
1289 -@$(DEL) perlglob$(o)
1290 -@$(DEL) perlmain$(o)
1291 -@$(DEL) perlmainst$(o)
1296 -@$(DEL) $(WPERLEXE)
1297 -@$(DEL) $(PERLEXESTATIC)
1298 -@$(DEL) $(PERLSTATICLIB)
1300 -@$(DEL) $(CORE_OBJ)
1301 -@$(DEL) $(GENUUDMAP) $(GENUUDMAP_OBJ) $(UUDMAP_H)
1302 -if exist $(MINIDIR) rmdir /s /q $(MINIDIR)
1303 -if exist $(UNIDATADIR1) rmdir /s /q $(UNIDATADIR1)
1304 -if exist $(UNIDATADIR2) rmdir /s /q $(UNIDATADIR2)
1305 -@$(DEL) $(UNIDATAFILES)
1306 -@$(DEL) $(WIN32_OBJ)
1309 ren ..\lib\Net\Changes.libnet Changes.tenbil
1310 ren ..\lib\Net\README.libnet README.tenbil
1311 -@$(DEL) ..\*$(o) ..\*.lib ..\*.exp *$(o) *.lib *.exp *.res
1312 ren ..\lib\Net\Changes.tenbil Changes.libnet
1313 ren ..\lib\Net\README.tenbil README.libnet
1314 -@$(DEL) ..\t\*.exe ..\t\*.dll ..\t\*.bat
1315 -@$(DEL) ..\x2p\*.exe ..\x2p\*.bat
1318 -@$(DEL) Extensions_static
1320 _preclean : cleanup_unpacked_files
1322 clean : _preclean Extensions_clean _clean
1324 realclean : _preclean Extensions_realclean MakePPPort_clean _clean
1326 # Handy way to run perlbug -ok without having to install and run the
1327 # installed perlbug. We don't re-run the tests here - we trust the user.
1328 # Please *don't* use this unless all tests pass.
1329 # If you want to report test failures, use "nmake nok" instead.
1331 $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)"
1334 $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" -F perl.ok
1337 $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)"
1340 $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" -F perl.nok