2 # Makefile to build perl on Windows NT using Microsoft NMAKE.
4 # Visual C++ 2.0 or later
5 # MS Platform SDK 64-bit compiler and tools
7 # This is set up to build a perl.exe that runs off a shared library
8 # (perl59.dll). Also makes individual DLLs for the XS extensions.
12 ## Make sure you read README.win32 *before* you mess with anything here!
16 ## Build configuration. Edit the values below to suit your needs.
20 # Set these to wherever you want "nmake install" to put your
24 INST_TOP = $(INST_DRV)\perl
27 # Comment this out if you DON'T want your perl installation to be versioned.
28 # This means that the new installation will overwrite any files from the
29 # old installation at the same INST_TOP location. Leaving it enabled is
30 # the safest route, as perl adds the extra version directory to all the
31 # locations it installs files to. If you disable it, an alternative
32 # versioned installation can be obtained by setting INST_TOP above to a
33 # path that includes an arbitrary version string.
38 # Comment this out if you DON'T want your perl installation to have
39 # architecture specific components. This means that architecture-
40 # specific files will be installed along with the architecture-neutral
41 # files. Leaving it enabled is safer and more flexible, in case you
42 # want to build multiple flavors of perl and install them together in
43 # the same location. Commenting it out gives you a simpler
44 # installation that is easier to understand for beginners.
46 #INST_ARCH = \$(ARCHNAME)
49 # Uncomment this if you want perl to run
50 # $Config{sitelibexp}\sitecustomize.pl
51 # before anything else. This script can then be set up, for example,
52 # to add additional entries to @INC.
54 #USE_SITECUST = define
57 # uncomment to enable multiple interpreters. This is need for fork()
58 # emulation and for thread support.
63 # Beginnings of interpreter cloning/threads; now reasonably complete.
64 # This should be enabled to get the fork() emulation. This needs
70 # uncomment to enable the implicit "host" layer for all system calls
71 # made by perl. This needs USE_MULTI above. This is also needed to
77 # Comment out next assign to disable perl's I/O subsystem and use compiler's
78 # stdio for IO - depending on your compiler vendor and run time library you may
79 # then get a number of fails from make test i.e. bugs - complain to them not us ;-).
80 # You will also be unable to take full advantage of perl5.8's support for multiple
81 # encodings and may see lower IO performance. You have been warned.
85 # Comment this out if you don't want to enable large file support for
86 # some reason. Should normally only be changed to maintain compatibility
87 # with an older release of perl.
88 USE_LARGE_FILES = define
91 # uncomment exactly one of the following
95 # Visual C++ > 2.x and < 6.x
97 # Visual C++ 6.x (aka Visual C++ 98)
99 # Visual C++ Toolkit 2003 (aka Visual C++ 7.x) (free command-line tools)
101 # Visual C++ .NET 2003 (aka Visual C++ 7.x) (full version)
103 # Visual C++ 2005 Express Edition (aka Visual C++ 8.x) (free version)
105 # Visual C++ 2005 (aka Visual C++ 8.x) (full version)
107 # Visual C++ 2008 Express Edition (aka Visual C++ 9.x) (free version)
109 # Visual C++ 2008 (aka Visual C++ 9.x) (full version)
113 # uncomment next line if you want debug version of perl (big,slow)
114 # If not enabled, we automatically try to use maximum optimization
115 # with all compilers that are known to have a working optimizer.
120 # uncomment to enable use of PerlCRT.DLL when using the Visual C compiler.
121 # It has patches that fix known bugs in older versions of MSVCRT.DLL.
122 # This currently requires VC 5.0 with Service Pack 3 or later.
123 # Get it from CPAN at http://www.cpan.org/authors/id/D/DO/DOUGL/
124 # and follow the directions in the package to install.
126 # Not recommended if you have VC 6.x and you're not running Windows 9x.
128 #USE_PERLCRT = define
131 # uncomment to enable linking with setargv.obj under the Visual C
132 # compiler. Setting this options enables perl to expand wildcards in
133 # arguments, but it may be harder to use alternate methods like
134 # File::DosGlob that are more powerful. This option is supported only with
137 #USE_SETARGV = define
140 # if you want to have the crypt() builtin function implemented, leave this or
141 # CRYPT_LIB uncommented. The fcrypt.c file named here contains a suitable
142 # version of des_fcrypt().
147 # if you didn't set CRYPT_SRC and if you have des_fcrypt() available in a
148 # library, uncomment this, and make sure the library exists (see README.win32)
149 # Specify the full pathname of the library.
151 #CRYPT_LIB = fcrypt.lib
154 # set this if you wish to use perl's malloc
155 # WARNING: Turning this on/off WILL break binary compatibility with extensions
156 # you may have compiled with/without it. Be prepared to recompile all
157 # extensions if you change the default. Currently, this cannot be enabled
158 # if you ask for USE_IMP_SYS above.
160 #PERL_MALLOC = define
163 # set this to enable debugging mstats
164 # This must be enabled to use the Devel::Peek::mstat() function. This cannot
165 # be enabled without PERL_MALLOC as well.
167 #DEBUG_MSTATS = define
170 # set this to additionally provide a statically linked perl-static.exe.
171 # Note that dynamic loading will not work with this perl, so you must
172 # include required modules statically using STATIC_EXT variable below.
173 # A static library perl59s.lib will also be created.
174 # Ordinary perl.exe is not affected by this option.
176 #BUILD_STATIC = define
180 # set the install locations of the compiler include/libraries
181 # Running VCVARS32.BAT is *required* when using Visual C.
182 # Some versions of Visual C don't define MSVCDIR in the environment,
183 # so you may have to set CCHOME explicitly (spaces in the path name should
188 CCINCDIR = $(CCHOME)\include
189 CCLIBDIR = $(CCHOME)\lib
192 # Additional compiler flags can be specified here.
194 BUILDOPT = $(BUILDOPTEXTRA)
197 # Adding -DPERL_HASH_SEED_EXPLICIT will disable randomization of Perl's
198 # internal hash function unless the PERL_HASH_SEED environment variable is set.
199 # Alternatively, adding -DNO_HASH_SEED will completely disable the
200 # randomization feature.
201 # The latter is required to maintain binary compatibility with Perl 5.8.0.
203 #BUILDOPT = $(BUILDOPT) -DPERL_HASH_SEED_EXPLICIT
204 #BUILDOPT = $(BUILDOPT) -DNO_HASH_SEED
207 # This should normally be disabled. Adding -DPERL_POLLUTE enables support
208 # for old symbols by default, at the expense of extreme pollution. You most
209 # probably just want to build modules that won't compile with
210 # perl Makefile.PL POLLUTE=1
211 # instead of enabling this. Please report such modules to the respective
214 #BUILDOPT = $(BUILDOPT) -DPERL_POLLUTE
217 # This should normally be disabled. Enabling it will disable the File::Glob
218 # implementation of CORE::glob.
220 #BUILDOPT = $(BUILDOPT) -DPERL_EXTERNAL_GLOB
223 # This should normally be disabled. Enabling it causes perl to read scripts
224 # in text mode (which is the 5.005 behavior) and will break ByteLoader.
226 #BUILDOPT = $(BUILDOPT) -DPERL_TEXTMODE_SCRIPTS
229 # specify semicolon-separated list of extra directories that modules will
230 # look for libraries (spaces in path names need not be quoted)
235 # set this to your email address (perl will guess a value from
236 # from your loginname and your hostname, which may not be right)
241 ## Build configuration ends.
244 ##################### CHANGE THESE ONLY IF YOU MUST #####################
246 !IF "$(CRYPT_SRC)$(CRYPT_LIB)" == ""
250 CRYPT_FLAG = -DHAVE_DES_FCRYPT
253 !IF "$(USE_IMP_SYS)" == "define"
258 !IF "$(PERL_MALLOC)" == ""
263 !IF "$(DEBUG_MSTATS)" == ""
267 !IF "$(DEBUG_MSTATS)" == "define"
268 BUILDOPT = $(BUILDOPT) -DPERL_DEBUGGING_MSTATS
271 !IF "$(USE_SITECUST)" == ""
275 !IF "$(USE_MULTI)" == ""
279 !IF "$(USE_ITHREADS)" == ""
283 !IF "$(USE_IMP_SYS)" == ""
287 !IF "$(USE_PERLIO)" == ""
291 !IF "$(USE_LARGE_FILES)" == ""
292 USE_LARGE_FILES = undef
295 !IF "$(USE_PERLCRT)" == ""
299 !IF "$(USE_IMP_SYS)$(USE_MULTI)" == "defineundef"
303 !IF "$(USE_ITHREADS)$(USE_MULTI)" == "defineundef"
307 !IF "$(USE_SITECUST)" == "define"
308 BUILDOPT = $(BUILDOPT) -DUSE_SITECUSTOMIZE
311 !IF "$(USE_MULTI)" != "undef"
312 BUILDOPT = $(BUILDOPT) -DPERL_IMPLICIT_CONTEXT
315 !IF "$(USE_IMP_SYS)" != "undef"
316 BUILDOPT = $(BUILDOPT) -DPERL_IMPLICIT_SYS
319 !IF "$(PROCESSOR_ARCHITECTURE)" == ""
320 PROCESSOR_ARCHITECTURE = x86
324 # When we are running from a 32bit cmd.exe on AMD64 then
325 # PROCESSOR_ARCHITECTURE is set to x86 and PROCESSOR_ARCHITEW6432
327 !IF "$(PROCESSOR_ARCHITEW6432)" != ""
328 PROCESSOR_ARCHITECTURE = $(PROCESSOR_ARCHITEW6432)
331 !IF "$(PROCESSOR_ARCHITECTURE)" == "AMD64" || "$(PROCESSOR_ARCHITECTURE)" == "IA64"
339 ARCHITECTURE = $(PROCESSOR_ARCHITECTURE)
340 !IF "$(ARCHITECTURE)" == "AMD64"
343 !IF "$(ARCHITECTURE)" == "IA64"
347 !IF "$(USE_MULTI)" == "define"
348 ARCHNAME = MSWin32-$(ARCHITECTURE)-multi
350 !IF "$(USE_PERLIO)" == "define"
351 ARCHNAME = MSWin32-$(ARCHITECTURE)-perlio
353 ARCHNAME = MSWin32-$(ARCHITECTURE)
357 !IF "$(USE_PERLIO)" == "define"
358 BUILDOPT = $(BUILDOPT) -DUSE_PERLIO
361 !IF "$(USE_ITHREADS)" == "define"
362 ARCHNAME = $(ARCHNAME)-thread
365 # Visual C++ 98, .NET 2003, 2005 and 2008 specific.
366 # VC++ 6.x, 7.x, 8.x and 9.x can load DLL's on demand. Makes the test suite run
367 # in about 10% less time. (The free version of 7.x can't do this, but the free
368 # versions of 8.x and 9.x can.)
369 !IF "$(CCTYPE)" == "MSVC60" || "$(CCTYPE)" == "MSVC70" || \
370 "$(CCTYPE)" == "MSVC80" || "$(CCTYPE)" == "MSVC80FREE" || \
371 "$(CCTYPE)" == "MSVC90" || "$(CCTYPE)" == "MSVC90FREE"
372 DELAYLOAD = -DELAYLOAD:ws2_32.dll delayimp.lib
375 # Visual C++ 2005 and 2008 (VC++ 8.x and 9.x) create manifest files for EXEs and
376 # DLLs. These either need copying everywhere with the binaries, or else need
377 # embedding in them otherwise MSVCR80.dll or MSVCR90.dll won't be found. Embed
378 # them for simplicity, and delete them afterwards so that they don't get
380 !IF "$(CCTYPE)" == "MSVC80" || "$(CCTYPE)" == "MSVC80FREE" || \
381 "$(CCTYPE)" == "MSVC90" || "$(CCTYPE)" == "MSVC90FREE"
382 EMBED_EXE_MANI = mt -nologo -manifest $@.manifest -outputresource:$@;1 && \
384 EMBED_DLL_MANI = mt -nologo -manifest $@.manifest -outputresource:$@;2 && \
388 ARCHDIR = ..\lib\$(ARCHNAME)
389 COREDIR = ..\lib\CORE
390 AUTODIR = ..\lib\auto
394 EXTUTILSDIR = $(LIBDIR)\ExtUtils
398 INST_SCRIPT = $(INST_TOP)$(INST_VER)\bin
399 INST_BIN = $(INST_SCRIPT)$(INST_ARCH)
400 INST_LIB = $(INST_TOP)$(INST_VER)\lib
401 INST_ARCHLIB = $(INST_LIB)$(INST_ARCH)
402 INST_COREDIR = $(INST_ARCHLIB)\CORE
403 INST_HTML = $(INST_TOP)$(INST_VER)\html
406 # Programs to compile, build .lib files and link
411 LIB32 = $(LINK32) -lib
418 INCLUDES = -I$(COREDIR) -I.\include -I. -I..
419 #PCHFLAGS = -Fpc:\temp\vcmoduls.pch -YX
420 DEFINES = -DWIN32 -D_CONSOLE -DNO_STRICT $(CRYPT_FLAG)
421 LOCDEFS = -DPERLDLL -DPERL_CORE
425 !IF "$(USE_PERLCRT)" != "define"
431 !IF "$(CFG)" == "Debug"
432 ! IF "$(CCTYPE)" == "MSVC20"
433 OPTIMIZE = -Od -MD -Z7 -DDEBUGGING
435 OPTIMIZE = -Od -MD -Zi -DDEBUGGING
439 OPTIMIZE = -MD -Zi -DNDEBUG
440 # we enable debug symbols in release builds also
441 LINK_DBG = -debug -opt:ref,icf
442 # you may want to enable this if you want COFF symbols in the executables
443 # in addition to the PDB symbols. The default Dr. Watson that ships with
444 # Windows can use the the former but not latter. The free WinDbg can be
445 # installed to get better stack traces from just the PDB symbols, so we
446 # avoid the bloat of COFF symbols by default.
447 #LINK_DBG = $(LINK_DBG) -debugtype:both
448 ! IF "$(WIN64)" == "define"
449 # enable Whole Program Optimizations (WPO) and Link Time Code Generation (LTCG)
450 OPTIMIZE = $(OPTIMIZE) -Ox -GL
451 LINK_DBG = $(LINK_DBG) -ltcg
453 # -O1 yields smaller code, which turns out to be faster than -O2 on x86
454 OPTIMIZE = $(OPTIMIZE) -O1
455 #OPTIMIZE = $(OPTIMIZE) -O2
459 !IF "$(WIN64)" == "define"
460 DEFINES = $(DEFINES) -DWIN64 -DCONSERVATIVE
461 OPTIMIZE = $(OPTIMIZE) -Wp64 -fp:precise
464 # For now, silence VC++ 8.x's and 9.x's warnings about "unsafe" CRT functions
465 # and POSIX CRT function names being deprecated.
466 !IF "$(CCTYPE)" == "MSVC80" || "$(CCTYPE)" == "MSVC80FREE" || \
467 "$(CCTYPE)" == "MSVC90" || "$(CCTYPE)" == "MSVC90FREE"
468 DEFINES = $(DEFINES) -D_CRT_SECURE_NO_DEPRECATE -D_CRT_NONSTDC_NO_DEPRECATE
471 # Use the MSVCRT read() fix if the PerlCRT was not chosen, but only when using
472 # VC++ 6.x or earlier. Later versions use MSVCR70.dll, MSVCR71.dll, etc, which
473 # do not require the fix.
474 !IF "$(CCTYPE)" == "MSVC20" || "$(CCTYPE)" == "MSVC" || "$(CCTYPE)" == "MSVC60"
475 ! IF "$(USE_PERLCRT)" != "define"
476 BUILDOPT = $(BUILDOPT) -DPERL_MSVCRT_READFIX
480 LIBBASEFILES = $(CRYPT_LIB) \
481 oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \
482 comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \
483 netapi32.lib uuid.lib ws2_32.lib mpr.lib winmm.lib \
484 version.lib odbc32.lib odbccp32.lib
486 # The 64 bit Platform SDK compilers contain a runtime library that doesn't
487 # include the buffer overrun verification code used by the /GS switch.
488 # Since the code links against libraries that are compiled with /GS, this
489 # "security cookie verification" must be included via bufferoverlow.lib.
490 !IF "$(WIN64)" == "define"
491 LIBBASEFILES = $(LIBBASEFILES) bufferoverflowU.lib
494 # we add LIBC here, since we may be using PerlCRT.dll
495 LIBFILES = $(LIBBASEFILES) $(LIBC)
497 #EXTRACFLAGS = -nologo -GF -W4 -wd4127 -wd4706
498 EXTRACFLAGS = -nologo -GF -W3
499 CFLAGS = $(EXTRACFLAGS) $(INCLUDES) $(DEFINES) $(LOCDEFS) \
500 $(PCHFLAGS) $(OPTIMIZE)
501 LINK_FLAGS = -nologo -nodefaultlib $(LINK_DBG) \
502 -libpath:"$(INST_COREDIR)" \
503 -machine:$(PROCESSOR_ARCHITECTURE)
508 CFLAGS_O = $(CFLAGS) $(BUILDOPT)
510 #################### do not edit below this line #######################
511 ############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ##############
519 .SUFFIXES : .c $(o) .dll .lib .exe .rc .res
522 $(CC) -c -I$(<D) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $<
528 $(LINK32) -dll -subsystem:windows -implib:$(*B).lib -def:$(*B).def \
529 -out:$@ $(LINK_FLAGS) $(LIBFILES) $< $(LIBPERL)
538 # makedef.pl must be updated if this changes, and this should normally
539 # only change when there is an incompatible revision of the public API.
540 PERLIMPLIB = ..\perl59.lib
541 PERLSTATICLIB = ..\perl59s.lib
542 PERLDLL = ..\perl59.dll
544 MINIPERL = ..\miniperl.exe
546 PERLEXE = ..\perl.exe
547 WPERLEXE = ..\wperl.exe
548 PERLEXESTATIC = ..\perl-static.exe
549 GLOBEXE = ..\perlglob.exe
550 CONFIGPM = ..\lib\Config.pm ..\lib\Config_heavy.pl
551 MINIMOD = ..\lib\ExtUtils\Miniperl.pm
553 GENUUDMAP = ..\generate_uudmap.exe
554 !IF "$(BUILD_STATIC)" == "define"
560 # Unicode data files generated by mktables
561 FIRSTUNIFILE = ..\lib\unicore\Canonical.pl
562 UNIDATAFILES = ..\lib\unicore\Canonical.pl ..\lib\unicore\Exact.pl \
563 ..\lib\unicore\Properties ..\lib\unicore\Decomposition.pl \
564 ..\lib\unicore\CombiningClass.pl ..\lib\unicore\Name.pl \
565 ..\lib\unicore\PVA.pl
567 # Directories of Unicode data files generated by mktables
568 UNIDATADIR1 = ..\lib\unicore\To
569 UNIDATADIR2 = ..\lib\unicore\lib
571 PERLEXE_ICO = .\perlexe.ico
572 PERLEXE_RES = .\perlexe.res
575 # Nominate a target which causes extensions to be re-built
576 # This used to be $(PERLEXE), but at worst it is the .dll that they depend
577 # on and really only the interface - i.e. the .def file used to export symbols
579 PERLDEP = perldll.def
581 PL2BAT = bin\pl2bat.pl
582 GLOBBAT = bin\perlglob.bat
598 ..\utils\config_data \
605 ..\utils\cpanp-run-perl \
630 !IF "$(WIN64)" == "define"
631 CFGSH_TMPL = config.vc64
632 CFGH_TMPL = config_H.vc64
634 CFGSH_TMPL = config.vc
635 CFGH_TMPL = config_H.vc
638 XCOPY = xcopy /f /r /i /d /y
639 RCOPY = xcopy /f /r /i /e /d /y
646 # filenames given to xsubpp must have forward slashes (since it puts
647 # full pathnames in #line strings)
648 XSUBPP = ..\$(MINIPERL) -I..\..\lib ..\$(EXTUTILSDIR)\xsubpp \
689 EXTRACORE_SRC = $(EXTRACORE_SRC) perllib.c
691 !IF "$(PERL_MALLOC)" == "define"
692 EXTRACORE_SRC = $(EXTRACORE_SRC) ..\malloc.c
695 EXTRACORE_SRC = $(EXTRACORE_SRC) ..\perlio.c
702 # We need this for miniperl build unless we override canned
703 # config.h #define building mini\*
704 #!IF "$(USE_PERLIO)" == "define"
705 WIN32_SRC = $(WIN32_SRC) .\win32io.c
708 !IF "$(CRYPT_SRC)" != ""
709 WIN32_SRC = $(WIN32_SRC) .\$(CRYPT_SRC)
712 DLL_SRC = $(DYNALOADER).c
758 .\include\sys\socket.h \
761 CORE_H = $(CORE_NOCFG_H) .\config.h
763 UUDMAP_H = ..\uudmap.h
765 MICROCORE_OBJ = $(MICROCORE_SRC:.c=.obj)
766 CORE_OBJ = $(MICROCORE_OBJ) $(EXTRACORE_SRC:.c=.obj)
767 WIN32_OBJ = $(WIN32_SRC:.c=.obj)
768 MINICORE_OBJ = $(MICROCORE_OBJ:..\=.\mini\) \
769 $(MINIDIR)\miniperlmain$(o) \
770 $(MINIDIR)\perlio$(o)
771 MINIWIN32_OBJ = $(WIN32_OBJ:.\=.\mini\)
772 MINI_OBJ = $(MINICORE_OBJ) $(MINIWIN32_OBJ)
773 DLL_OBJ = $(DLL_SRC:.c=.obj)
774 X2P_OBJ = $(X2P_SRC:.c=.obj)
775 GENUUDMAP_OBJ = $(GENUUDMAP:.exe=.obj)
777 PERLDLL_OBJ = $(CORE_OBJ)
778 PERLEXE_OBJ = perlmain$(o)
779 PERLEXEST_OBJ = perlmainst$(o)
781 PERLDLL_OBJ = $(PERLDLL_OBJ) $(WIN32_OBJ) $(DLL_OBJ)
783 !IF "$(USE_SETARGV)" != ""
784 SETARGV_OBJ = setargv$(o)
787 # specify static extensions here
788 #STATIC_EXT = Cwd Compress/Raw/Zlib
789 STATIC_EXT = Win32CORE
791 DYNALOADER = $(EXTDIR)\DynaLoader\DynaLoader
794 "INST_DRV=$(INST_DRV)" \
795 "INST_TOP=$(INST_TOP)" \
796 "INST_VER=$(INST_VER)" \
797 "INST_ARCH=$(INST_ARCH)" \
798 "archname=$(ARCHNAME)" \
801 "ccflags=$(EXTRACFLAGS) $(OPTIMIZE:"=\") $(DEFINES) $(BUILDOPT)" \
802 "cf_email=$(EMAIL)" \
803 "d_crypt=$(D_CRYPT)" \
804 "d_mymalloc=$(PERL_MALLOC)" \
806 "incpath=$(CCINCDIR:"=\")" \
807 "libperl=$(PERLIMPLIB:..\=)" \
808 "libpth=$(CCLIBDIR:"=\");$(EXTRALIBDIRS:"=\")" \
810 "make=$(MAKE_BARE)" \
811 "static_ext=$(STATIC_EXT)" \
812 "usethreads=$(USE_ITHREADS)" \
813 "useithreads=$(USE_ITHREADS)" \
814 "usemultiplicity=$(USE_MULTI)" \
815 "useperlio=$(USE_PERLIO)" \
816 "uselargefiles=$(USE_LARGE_FILES)" \
817 "usesitecustomize=$(USE_SITECUST)" \
818 "LINK_FLAGS=$(LINK_FLAGS:"=\")" \
819 "optimize=$(OPTIMIZE:"=\")"
825 all : .\config.h $(GLOBEXE) $(MINIMOD) $(CONFIGPM) $(UNIDATAFILES) $(PERLEXE) \
826 $(X2P) MakePPPort Extensions $(PERLSTATIC)
827 @echo Everything is up to date. '$(MAKE_BARE) test' to run test suite.
829 ..\regnodes.h : ..\regcomp.sym ..\regcomp.pl ..\regexp.h
834 ..\regcharclass.h : ..\Porting\regcharclass.pl
836 Porting\regcharclass.pl
839 regnodes : ..\regnodes.h
841 ..\regcomp$(o) : ..\regnodes.h ..\regcharclass.h
843 ..\regexec$(o) : ..\regnodes.h ..\regcharclass.h
845 reonly : regnodes .\config.h $(GLOBEXE) $(MINIMOD) $(CONFIGPM) $(UNIDATAFILES) \
846 $(PERLEXE) $(X2P) Extensions_reonly
847 @echo Perl and 're' are up to date.
849 $(DYNALOADER)$(o) : $(DYNALOADER).c $(CORE_H) $(EXTDIR)\DynaLoader\dlutils.c
851 static: $(PERLEXESTATIC)
853 #------------------------------------------------------------
855 $(GLOBEXE) : perlglob$(o)
856 $(LINK32) $(LINK_FLAGS) $(LIBFILES) -out:$@ -subsystem:$(SUBSYS) \
857 perlglob$(o) setargv$(o)
860 perlglob$(o) : perlglob.c
862 config.w32 : $(CFGSH_TMPL)
863 copy $(CFGSH_TMPL) config.w32
865 .\config.h : $(CFGH_TMPL)
867 copy $(CFGH_TMPL) config.h
869 ..\config.sh : config.w32 $(MINIPERL) config_sh.PL
870 $(MINIPERL) -I..\lib config_sh.PL $(CFG_VARS) config.w32 > ..\config.sh
872 # this target is for when changes to the main config.sh happen
873 # edit config.{b,v,g}c and make this target once for each supported
874 # compiler (e.g. `nmake CCTYPE=BORLAND regen_config_h`)
876 perl config_sh.PL $(CFG_VARS) $(CFGSH_TMPL) > ..\config.sh
878 -del /f perl.exe perl*.dll
883 -perl config_h.PL "INST_VER=$(INST_VER)"
884 rename config.h $(CFGH_TMPL)
886 $(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl
890 if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL)
891 $(XCOPY) ..\*.h $(COREDIR)\*.*
892 $(XCOPY) *.h $(COREDIR)\*.*
893 $(XCOPY) ..\ext\re\re.pm $(LIBDIR)\*.*
894 $(RCOPY) include $(COREDIR)\*.*
895 -$(MINIPERL) -I..\lib config_h.PL "INST_VER=$(INST_VER)"
896 if errorlevel 1 $(MAKE) /$(MAKEFLAGS) $(CONFIGPM)
898 $(MINIPERL) : $(MINIDIR) $(MINI_OBJ)
899 $(LINK32) -subsystem:console -out:$@ @<<
900 $(LINK_FLAGS) $(LIBFILES) $(MINI_OBJ)
905 if not exist "$(MINIDIR)" mkdir "$(MINIDIR)"
907 $(MINICORE_OBJ) : $(CORE_NOCFG_H)
908 $(CC) -c $(CFLAGS) -DPERL_EXTERNAL_GLOB $(OBJOUT_FLAG)$@ ..\$(*F).c
910 $(MINIWIN32_OBJ) : $(CORE_NOCFG_H)
911 $(CC) -c $(CFLAGS) $(OBJOUT_FLAG)$@ $(*F).c
913 # -DPERL_IMPLICIT_SYS needs C++ for perllib.c
914 # This is the only file that depends on perlhost.h, vmem.h, and vdir.h
915 !IF "$(USE_IMP_SYS)" == "define"
916 perllib$(o) : perllib.c .\perlhost.h .\vdir.h .\vmem.h
917 $(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c
920 # 1. we don't want to rebuild miniperl.exe when config.h changes
921 # 2. we don't want to rebuild miniperl.exe with non-default config.h
922 $(MINI_OBJ) : $(CORE_NOCFG_H)
924 $(WIN32_OBJ) : $(CORE_H)
925 $(CORE_OBJ) : $(CORE_H)
926 $(DLL_OBJ) : $(CORE_H)
927 $(X2P_OBJ) : $(CORE_H)
929 perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym ..\pp.sym ..\makedef.pl
930 $(MINIPERL) -I..\lib buildext.pl --create-perllibst-h
931 $(MINIPERL) -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) $(BUILDOPT) \
932 CCTYPE=$(CCTYPE) > perldll.def
934 $(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES) Extensions_static
935 $(LINK32) -dll -def:perldll.def -base:0x28000000 -out:$@ @Extensions_static @<<
936 $(LINK_FLAGS) $(DELAYLOAD) $(LIBFILES) $(PERLDLL_OBJ) $(PERLDLL_RES)
939 $(XCOPY) $(PERLIMPLIB) $(COREDIR)
941 $(PERLSTATICLIB): Extensions_static
942 $(LIB32) $(LIB_FLAGS) -out:$@ @Extensions_static @<<
945 $(XCOPY) $(PERLSTATICLIB) $(COREDIR)
947 $(PERLEXE_ICO): $(MINIPERL) ..\uupacktool.pl $(PERLEXE_ICO).packd
948 $(MINIPERL) -I..\lib ..\uupacktool.pl -u $(PERLEXE_ICO).packd $(PERLEXE_ICO)
950 $(PERLEXE_RES): perlexe.rc $(PERLEXE_ICO)
952 $(MINIMOD) : $(MINIPERL) ..\minimod.pl
954 miniperl minimod.pl > lib\ExtUtils\Miniperl.pm
957 ..\x2p\a2p$(o) : ..\x2p\a2p.c
958 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\a2p.c
960 ..\x2p\hash$(o) : ..\x2p\hash.c
961 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\hash.c
963 ..\x2p\str$(o) : ..\x2p\str.c
964 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\str.c
966 ..\x2p\util$(o) : ..\x2p\util.c
967 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\util.c
969 ..\x2p\walk$(o) : ..\x2p\walk.c
970 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\walk.c
972 $(X2P) : $(MINIPERL) $(X2P_OBJ)
973 $(MINIPERL) ..\x2p\find2perl.PL
974 $(MINIPERL) ..\x2p\s2p.PL
975 $(LINK32) -subsystem:console -out:$@ @<<
976 $(LINK_FLAGS) $(LIBFILES) $(X2P_OBJ)
980 $(MINIDIR)\globals$(o) : $(UUDMAP_H)
982 $(UUDMAP_H) : $(GENUUDMAP)
983 $(GENUUDMAP) >$(UUDMAP_H)
985 $(GENUUDMAP) : $(GENUUDMAP_OBJ)
986 $(LINK32) -subsystem:console -out:$@ @<<
987 $(LINK_FLAGS) $(LIBFILES) $(GENUUDMAP_OBJ)
991 perlmain.c : runperl.c
992 copy runperl.c perlmain.c
994 perlmain$(o) : perlmain.c
995 $(CC) $(CFLAGS_O:-DPERLDLL=-UPERLDLL) $(OBJOUT_FLAG)$@ -c perlmain.c
997 perlmainst.c : runperl.c
998 copy runperl.c perlmainst.c
1000 perlmainst$(o) : perlmainst.c
1001 $(CC) $(CFLAGS_O) $(OBJOUT_FLAG)$@ -c perlmainst.c
1003 $(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES)
1004 $(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(LINK_FLAGS) \
1005 $(LIBFILES) $(PERLEXE_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB) $(PERLEXE_RES)
1007 copy $(PERLEXE) $(WPERLEXE)
1008 $(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS
1009 copy splittree.pl ..
1010 $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
1012 $(PERLEXESTATIC): $(PERLSTATICLIB) $(CONFIGPM) $(PERLEXEST_OBJ) $(PERLEXE_RES)
1013 $(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(LINK_FLAGS) \
1014 @Extensions_static $(PERLSTATICLIB) \
1015 $(LIBFILES) $(PERLEXEST_OBJ) $(SETARGV_OBJ) $(PERLEXE_RES)
1018 $(DYNALOADER).c: $(MINIPERL) $(EXTDIR)\DynaLoader\dl_win32.xs $(CONFIGPM)
1019 if not exist $(AUTODIR) mkdir $(AUTODIR)
1021 ..\$(MINIPERL) -I..\..\lib $(*B)_pm.PL
1022 ..\$(MINIPERL) -I..\..\lib XSLoader_pm.PL
1024 $(XCOPY) $(EXTDIR)\$(*B)\$(*B).pm $(LIBDIR)\$(NULL)
1025 $(XCOPY) $(EXTDIR)\$(*B)\XSLoader.pm $(LIBDIR)\$(NULL)
1027 $(XSUBPP) dl_win32.xs > $(*B).c
1030 $(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs
1031 copy dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs
1033 MakePPPort: $(MINIPERL) $(CONFIGPM)
1034 $(MINIPERL) -I..\lib ..\mkppport
1037 -if exist $(MINIPERL) $(MINIPERL) -I..\lib ..\mkppport --clean
1039 #-------------------------------------------------------------------------------
1040 Extensions: buildext.pl $(PERLDEP) $(CONFIGPM)
1041 $(XCOPY) ..\*.h $(COREDIR)\*.*
1042 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) --dynamic
1043 -if exist ext $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext --dynamic
1045 Extensions_reonly: buildext.pl $(PERLDEP) $(CONFIGPM)
1046 $(XCOPY) ..\*.h $(COREDIR)\*.*
1047 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) --dynamic +re
1048 -if exist ext $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext --dynamic +re
1050 Extensions_static : buildext.pl $(PERLDEP) $(CONFIGPM)
1051 $(XCOPY) ..\*.h $(COREDIR)\*.*
1052 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) --static
1053 -if exist ext $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext --static
1054 $(MINIPERL) -I..\lib buildext.pl --list-static-libs > Extensions_static
1057 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) clean
1058 -if exist $(MINIPERL) if exist ext $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext clean
1060 Extensions_realclean:
1061 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) realclean
1062 -if exist $(MINIPERL) if exist ext $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext realclean
1064 #-------------------------------------------------------------------------------
1067 $(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=$(HTMLDIR) \
1068 --podpath=pod:lib:ext:utils --htmlroot="file://$(INST_HTML::=|)" \
1069 --libpod=perlfunc:perlguts:perlvar:perlrun:perlop --recurse
1071 # Note that this next section is parsed (and regenerated) by pod/buildtoc
1072 # so please check that script before making structural changes here
1074 utils: $(PERLEXE) $(X2P)
1076 $(MAKE) PERL=$(MINIPERL)
1078 copy ..\vms\perlvms.pod .\perlvms.pod
1079 copy ..\README.aix ..\pod\perlaix.pod
1080 copy ..\README.amiga ..\pod\perlamiga.pod
1081 copy ..\README.apollo ..\pod\perlapollo.pod
1082 copy ..\README.beos ..\pod\perlbeos.pod
1083 copy ..\README.bs2000 ..\pod\perlbs2000.pod
1084 copy ..\README.ce ..\pod\perlce.pod
1085 copy ..\README.cn ..\pod\perlcn.pod
1086 copy ..\README.cygwin ..\pod\perlcygwin.pod
1087 copy ..\README.dgux ..\pod\perldgux.pod
1088 copy ..\README.dos ..\pod\perldos.pod
1089 copy ..\README.epoc ..\pod\perlepoc.pod
1090 copy ..\README.freebsd ..\pod\perlfreebsd.pod
1091 copy ..\README.hpux ..\pod\perlhpux.pod
1092 copy ..\README.hurd ..\pod\perlhurd.pod
1093 copy ..\README.irix ..\pod\perlirix.pod
1094 copy ..\README.jp ..\pod\perljp.pod
1095 copy ..\README.ko ..\pod\perlko.pod
1096 copy ..\README.linux ..\pod\perllinux.pod
1097 copy ..\README.machten ..\pod\perlmachten.pod
1098 copy ..\README.macos ..\pod\perlmacos.pod
1099 copy ..\README.macosx ..\pod\perlmacosx.pod
1100 copy ..\README.mint ..\pod\perlmint.pod
1101 copy ..\README.mpeix ..\pod\perlmpeix.pod
1102 copy ..\README.netware ..\pod\perlnetware.pod
1103 copy ..\README.openbsd ..\pod\perlopenbsd.pod
1104 copy ..\README.os2 ..\pod\perlos2.pod
1105 copy ..\README.os390 ..\pod\perlos390.pod
1106 copy ..\README.os400 ..\pod\perlos400.pod
1107 copy ..\README.plan9 ..\pod\perlplan9.pod
1108 copy ..\README.qnx ..\pod\perlqnx.pod
1109 copy ..\README.riscos ..\pod\perlriscos.pod
1110 copy ..\README.solaris ..\pod\perlsolaris.pod
1111 copy ..\README.symbian ..\pod\perlsymbian.pod
1112 copy ..\README.tru64 ..\pod\perltru64.pod
1113 copy ..\README.tw ..\pod\perltw.pod
1114 copy ..\README.uts ..\pod\perluts.pod
1115 copy ..\README.vmesa ..\pod\perlvmesa.pod
1116 copy ..\README.vms ..\pod\perlvms.pod
1117 copy ..\README.vos ..\pod\perlvos.pod
1118 copy ..\README.win32 ..\pod\perlwin32.pod
1119 copy ..\pod\perl595delta.pod ..\pod\perldelta.pod
1120 $(MAKE) -f ..\win32\pod.mak converters
1122 $(PERLEXE) lib_pm.PL
1124 $(PERLEXE) $(PL2BAT) $(UTILS)
1126 # Note that the pod cleanup in this next section is parsed (and regenerated
1127 # by pod/buildtoc so please check that script before making changes here
1129 distclean: realclean
1130 -del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \
1131 $(PERLIMPLIB) ..\miniperl.lib $(MINIMOD) \
1132 $(PERLEXESTATIC) $(PERLSTATICLIB)
1134 -del /f $(DYNALOADER).c
1135 -del /f $(EXTDIR)\DynaLoader\dl_win32.xs
1136 -del /f $(EXTDIR)\DynaLoader\DynaLoader.pm
1137 -del /f $(EXTDIR)\DynaLoader\XSLoader.pm
1138 -del /f $(LIBDIR)\Encode.pm $(LIBDIR)\encoding.pm $(LIBDIR)\Errno.pm
1139 -del /f $(LIBDIR)\Config.pod $(LIBDIR)\POSIX.pod $(LIBDIR)\threads.pm
1140 -del /f $(LIBDIR)\.exists $(LIBDIR)\attrs.pm $(LIBDIR)\DynaLoader.pm
1141 -del /f $(LIBDIR)\XSLoader.pm $(LIBDIR)\lib.pm
1142 -del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm
1143 -del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm
1144 -del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm
1145 -del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm
1146 -del /f $(LIBDIR)\Devel\Peek.pm $(LIBDIR)\Devel\DProf.pm
1147 -del /f $(LIBDIR)\Devel\PPPort.pm
1148 -del /f $(LIBDIR)\File\Glob.pm
1149 -del /f $(LIBDIR)\Storable.pm
1150 -del /f $(LIBDIR)\Digest\MD5.pm
1151 -del /f $(LIBDIR)\Digest\SHA.pm
1152 -del /f $(LIBDIR)\PerlIO\encoding.pm
1153 -del /f $(LIBDIR)\PerlIO\scalar.pm
1154 -del /f $(LIBDIR)\PerlIO\via.pm
1155 -del /f $(LIBDIR)\Sys\Hostname.pm
1156 -del /f $(LIBDIR)\threads\shared.pm
1157 -del /f $(LIBDIR)\Time\HiRes.pm
1158 -del /f $(LIBDIR)\Unicode\Normalize.pm
1159 -del /f $(LIBDIR)\Math\BigInt\FastCalc.pm
1160 -del /f $(LIBDIR)\Win32.pm
1161 -del /f $(LIBDIR)\Win32CORE.pm
1162 -del /f $(LIBDIR)\Win32API\File.pm
1163 -del /f $(LIBDIR)\Win32API\File\cFile.pc
1164 -if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B
1165 -if exist $(LIBDIR)\Compress rmdir /s /q $(LIBDIR)\Compress
1166 -if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data
1167 -if exist $(LIBDIR)\Encode rmdir /s /q $(LIBDIR)\Encode
1168 -if exist $(LIBDIR)\Filter\Util rmdir /s /q $(LIBDIR)\Filter\Util
1169 -if exist $(LIBDIR)\Hash rmdir /s /q $(LIBDIR)\Hash
1170 -if exist $(LIBDIR)\IO\Compress rmdir /s /q $(LIBDIR)\IO\Compress
1171 -if exist $(LIBDIR)\IO\Socket rmdir /s /q $(LIBDIR)\IO\Socket
1172 -if exist $(LIBDIR)\IO\Uncompress rmdir /s /q $(LIBDIR)\IO\Uncompress
1173 -if exist $(LIBDIR)\List rmdir /s /q $(LIBDIR)\List
1174 -if exist $(LIBDIR)\MIME rmdir /s /q $(LIBDIR)\MIME
1175 -if exist $(LIBDIR)\re rmdir /s /q $(LIBDIR)\re
1176 -if exist $(LIBDIR)\Scalar rmdir /s /q $(LIBDIR)\Scalar
1177 -if exist $(LIBDIR)\Sys rmdir /s /q $(LIBDIR)\Sys
1178 -if exist $(LIBDIR)\threads rmdir /s /q $(LIBDIR)\threads
1179 -if exist $(LIBDIR)\XS rmdir /s /q $(LIBDIR)\XS
1180 -if exist $(LIBDIR)\Win32API rmdir /s /q $(LIBDIR)\Win32API
1181 -cd $(PODDIR) && del /f *.html *.bat checkpods \
1182 perlaix.pod perlamiga.pod perlapollo.pod perlbeos.pod \
1183 perlbs2000.pod perlce.pod perlcn.pod perlcygwin.pod \
1184 perldelta.pod perldgux.pod perldos.pod perlepoc.pod \
1185 perlfreebsd.pod perlhpux.pod perlhurd.pod perlirix.pod \
1186 perljp.pod perlko.pod perllinux.pod perlmachten.pod \
1187 perlmacos.pod perlmacosx.pod perlmint.pod perlmpeix.pod \
1188 perlnetware.pod perlopenbsd.pod perlos2.pod perlos390.pod \
1189 perlos400.pod perlplan9.pod perlqnx.pod perlriscos.pod \
1190 perlsolaris.pod perlsymbian.pod perltru64.pod perltw.pod \
1191 perluts.pod perlvmesa.pod perlvms.pod perlvms.pod perlvos.pod \
1193 pod2html pod2latex pod2man pod2text pod2usage \
1194 podchecker podselect
1195 -cd ..\utils && del /f h2ph splain perlbug pl2pm c2ph pstruct h2xs \
1196 perldoc perlivp dprofpp libnetcfg enc2xs piconv cpan *.bat \
1197 xsubpp instmodsh prove ptar ptardiff cpanp-run-perl cpanp cpan2dist shasum corelist config_data
1198 -cd ..\x2p && del /f find2perl s2p psed *.bat
1199 -del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c config.h.new \
1204 -del /f $(PERLEXE_ICO) perl.base
1205 -cd .. && del /s *.lib *.map *.pdb *.ilk *.bs *$(o) .exists pm_to_blib
1206 -cd $(EXTDIR) && del /s *.def Makefile Makefile.old
1207 -if exist $(AUTODIR) rmdir /s /q $(AUTODIR)
1208 -if exist $(COREDIR) rmdir /s /q $(COREDIR)
1209 -if exist pod2htmd.tmp del pod2htmd.tmp
1210 -if exist pod2htmi.tmp del pod2htmi.tmp
1211 -if exist $(HTMLDIR) rmdir /s /q $(HTMLDIR)
1213 install : all installbare installhtml
1216 $(PERLEXE) ..\installperl
1217 if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.*
1218 if exist $(PERLEXESTATIC) $(XCOPY) $(PERLEXESTATIC) $(INST_BIN)\*.*
1219 $(XCOPY) $(GLOBEXE) $(INST_BIN)\*.*
1220 if exist ..\perl*.pdb $(XCOPY) ..\perl*.pdb $(INST_BIN)\*.*
1221 if exist ..\x2p\a2p.pdb $(XCOPY) ..\x2p\a2p.pdb $(INST_BIN)\*.*
1222 $(XCOPY) bin\*.bat $(INST_SCRIPT)\*.*
1225 $(RCOPY) $(HTMLDIR)\*.* $(INST_HTML)\*.*
1227 inst_lib : $(CONFIGPM)
1228 copy splittree.pl ..
1229 $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
1230 $(RCOPY) ..\lib $(INST_LIB)\*.*
1232 $(UNIDATAFILES) : $(MINIPERL) $(CONFIGPM) ..\lib\unicore\mktables
1233 cd ..\lib\unicore && \
1234 ..\$(MINIPERL) -I.. mktables -check $@ $(FIRSTUNIFILE)
1236 minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) utils $(UNIDATAFILES)
1237 $(XCOPY) $(MINIPERL) ..\t\$(NULL)
1238 if exist ..\t\perl.exe del /f ..\t\perl.exe
1239 rename ..\t\miniperl.exe perl.exe
1240 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1243 $(MINIPERL) -I..\lib harness base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t
1245 test-prep : all utils unpack_files
1246 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1247 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1248 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1252 $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
1256 $(MINIPERL) -I..\lib ..\uupacktool.pl -u -d .. -m
1258 cleanup_unpacked_files:
1259 -if exist $(MINIPERL) $(MINIPERL) -I..\lib ..\uupacktool.pl -c -d .. -m
1261 test-reonly : reonly utils
1262 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1263 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1264 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1266 $(PERLEXE) -I..\lib harness $(OPT) -re \bpat\b \breg \bre\b \bsubst \brxcode $(EXTRA)
1274 test-notty : test-prep
1275 set PERL_SKIP_TTY_TEST=1
1277 $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
1281 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1282 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1283 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1285 $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
1289 -@$(DEL) miniperlmain$(o)
1290 -@$(DEL) $(MINIPERL)
1291 -@$(DEL) perlglob$(o)
1292 -@$(DEL) perlmain$(o)
1293 -@$(DEL) perlmainst$(o)
1298 -@$(DEL) $(WPERLEXE)
1299 -@$(DEL) $(PERLEXESTATIC)
1300 -@$(DEL) $(PERLSTATICLIB)
1302 -@$(DEL) $(CORE_OBJ)
1303 -@$(DEL) $(GENUUDMAP) $(GENUUDMAP_OBJ) $(UUDMAP_H)
1304 -if exist $(MINIDIR) rmdir /s /q $(MINIDIR)
1305 -if exist $(UNIDATADIR1) rmdir /s /q $(UNIDATADIR1)
1306 -if exist $(UNIDATADIR2) rmdir /s /q $(UNIDATADIR2)
1307 -@$(DEL) $(UNIDATAFILES)
1308 -@$(DEL) $(WIN32_OBJ)
1311 -@$(DEL) ..\*$(o) ..\*.lib ..\*.exp *$(o) *.lib *.exp *.res
1312 -@$(DEL) ..\t\*.exe ..\t\*.dll ..\t\*.bat
1313 -@$(DEL) ..\x2p\*.exe ..\x2p\*.bat
1316 -@$(DEL) Extensions_static
1318 _preclean : cleanup_unpacked_files
1320 clean : _preclean Extensions_clean _clean
1322 realclean : _preclean Extensions_realclean MakePPPort_clean _clean
1324 # Handy way to run perlbug -ok without having to install and run the
1325 # installed perlbug. We don't re-run the tests here - we trust the user.
1326 # Please *don't* use this unless all tests pass.
1327 # If you want to report test failures, use "nmake nok" instead.
1329 $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)"
1332 $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" -F perl.ok
1335 $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)"
1338 $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" -F perl.nok