2 # Makefile to build perl on Windows NT using Microsoft NMAKE.
4 # Visual C++ 2.0 through 7.0 (and possibly newer versions)
5 # MS Platform SDK 64-bit compiler and tools
7 # This is set up to build a perl.exe that runs off a shared library
8 # (perl59.dll). Also makes individual DLLs for the XS extensions.
12 ## Make sure you read README.win32 *before* you mess with anything here!
16 ## Build configuration. Edit the values below to suit your needs.
20 # Set these to wherever you want "nmake install" to put your
24 INST_TOP = $(INST_DRV)\perl
27 # Comment this out if you DON'T want your perl installation to be versioned.
28 # This means that the new installation will overwrite any files from the
29 # old installation at the same INST_TOP location. Leaving it enabled is
30 # the safest route, as perl adds the extra version directory to all the
31 # locations it installs files to. If you disable it, an alternative
32 # versioned installation can be obtained by setting INST_TOP above to a
33 # path that includes an arbitrary version string.
38 # Comment this out if you DON'T want your perl installation to have
39 # architecture specific components. This means that architecture-
40 # specific files will be installed along with the architecture-neutral
41 # files. Leaving it enabled is safer and more flexible, in case you
42 # want to build multiple flavors of perl and install them together in
43 # the same location. Commenting it out gives you a simpler
44 # installation that is easier to understand for beginners.
46 #INST_ARCH = \$(ARCHNAME)
49 # Uncomment this if you want perl to run
50 # $Config{sitelibexp}\sitecustomize.pl
51 # before anything else. This script can then be set up, for example,
52 # to add additional entries to @INC.
54 #USE_SITECUST = define
57 # uncomment to enable multiple interpreters. This is need for fork()
58 # emulation and for thread support.
63 # Beginnings of interpreter cloning/threads; now reasonably complete.
64 # This should be enabled to get the fork() emulation. This needs
70 # uncomment to enable the implicit "host" layer for all system calls
71 # made by perl. This needs USE_MULTI above. This is also needed to
77 # Comment out next assign to disable perl's I/O subsystem and use compiler's
78 # stdio for IO - depending on your compiler vendor and run time library you may
79 # then get a number of fails from make test i.e. bugs - complain to them not us ;-).
80 # You will also be unable to take full advantage of perl5.8's support for multiple
81 # encodings and may see lower IO performance. You have been warned.
85 # Comment this out if you don't want to enable large file support for
86 # some reason. Should normally only be changed to maintain compatibility
87 # with an older release of perl.
88 USE_LARGE_FILES = define
91 # uncomment exactly one of the following
95 # Visual C++ > 2.x and < 6.x
97 # Visual C++ 6.x (aka Visual Studio 98)
99 # Visual C++ Toolkit 2003 (free version of Visual C++ 7.x command-line tools)
101 # Visual C++ 7.x (aka Visual Studio .NET 2003) (full version)
103 # Visual C++ Toolkit 2005 (free version of Visual C++ 8.x command-line tools)
105 # Visual C++ 8.x (aka Visual Studio 2005) (full version)
109 # uncomment next line if you want debug version of perl (big,slow)
110 # If not enabled, we automatically try to use maximum optimization
111 # with all compilers that are known to have a working optimizer.
116 # uncomment to enable use of PerlCRT.DLL when using the Visual C compiler.
117 # It has patches that fix known bugs in older versions of MSVCRT.DLL.
118 # This currently requires VC 5.0 with Service Pack 3 or later.
119 # Get it from CPAN at http://www.cpan.org/authors/id/D/DO/DOUGL/
120 # and follow the directions in the package to install.
122 # Not recommended if you have VC 6.x and you're not running Windows 9x.
124 #USE_PERLCRT = define
127 # uncomment to enable linking with setargv.obj under the Visual C
128 # compiler. Setting this options enables perl to expand wildcards in
129 # arguments, but it may be harder to use alternate methods like
130 # File::DosGlob that are more powerful. This option is supported only with
133 #USE_SETARGV = define
136 # if you want to have the crypt() builtin function implemented, leave this or
137 # CRYPT_LIB uncommented. The fcrypt.c file named here contains a suitable
138 # version of des_fcrypt().
143 # if you didn't set CRYPT_SRC and if you have des_fcrypt() available in a
144 # library, uncomment this, and make sure the library exists (see README.win32)
145 # Specify the full pathname of the library.
147 #CRYPT_LIB = fcrypt.lib
150 # set this if you wish to use perl's malloc
151 # WARNING: Turning this on/off WILL break binary compatibility with extensions
152 # you may have compiled with/without it. Be prepared to recompile all
153 # extensions if you change the default. Currently, this cannot be enabled
154 # if you ask for USE_IMP_SYS above.
156 #PERL_MALLOC = define
159 # set this to enable debugging mstats
160 # This must be enabled to use the Devel::Peek::mstat() function. This cannot
161 # be enabled without PERL_MALLOC as well.
163 #DEBUG_MSTATS = define
167 # set the install locations of the compiler include/libraries
168 # Running VCVARS32.BAT is *required* when using Visual C.
169 # Some versions of Visual C don't define MSVCDIR in the environment,
170 # so you may have to set CCHOME explicitly (spaces in the path name should
175 CCINCDIR = $(CCHOME)\include
176 CCLIBDIR = $(CCHOME)\lib
179 # Additional compiler flags can be specified here.
181 BUILDOPT = $(BUILDOPTEXTRA)
184 # Adding -DPERL_HASH_SEED_EXPLICIT will disable randomization of Perl's
185 # internal hash function unless the PERL_HASH_SEED environment variable is set.
186 # Alternatively, adding -DNO_HASH_SEED will completely disable the
187 # randomization feature.
188 # The latter is required to maintain binary compatibility with Perl 5.8.0.
190 #BUILDOPT = $(BUILDOPT) -DPERL_HASH_SEED_EXPLICIT
191 #BUILDOPT = $(BUILDOPT) -DNO_HASH_SEED
194 # This should normally be disabled. Adding -DPERL_POLLUTE enables support
195 # for old symbols by default, at the expense of extreme pollution. You most
196 # probably just want to build modules that won't compile with
197 # perl Makefile.PL POLLUTE=1
198 # instead of enabling this. Please report such modules to the respective
201 #BUILDOPT = $(BUILDOPT) -DPERL_POLLUTE
204 # This should normally be disabled. Enabling it will disable the File::Glob
205 # implementation of CORE::glob.
207 #BUILDOPT = $(BUILDOPT) -DPERL_EXTERNAL_GLOB
210 # This should normally be disabled. Enabling it causes perl to read scripts
211 # in text mode (which is the 5.005 behavior) and will break ByteLoader.
213 #BUILDOPT = $(BUILDOPT) -DPERL_TEXTMODE_SCRIPTS
216 # specify semicolon-separated list of extra directories that modules will
217 # look for libraries (spaces in path names need not be quoted)
222 # set this to your email address (perl will guess a value from
223 # from your loginname and your hostname, which may not be right)
228 ## Build configuration ends.
231 ##################### CHANGE THESE ONLY IF YOU MUST #####################
233 !IF "$(CRYPT_SRC)$(CRYPT_LIB)" == ""
237 CRYPT_FLAG = -DHAVE_DES_FCRYPT
240 !IF "$(USE_IMP_SYS)" == "define"
245 !IF "$(PERL_MALLOC)" == ""
250 !IF "$(DEBUG_MSTATS)" == ""
254 !IF "$(DEBUG_MSTATS)" == "define"
255 BUILDOPT = $(BUILDOPT) -DPERL_DEBUGGING_MSTATS
258 !IF "$(USE_SITECUST)" == ""
262 !IF "$(USE_MULTI)" == ""
266 !IF "$(USE_ITHREADS)" == ""
270 !IF "$(USE_IMP_SYS)" == ""
274 !IF "$(USE_PERLIO)" == ""
278 !IF "$(USE_LARGE_FILES)" == ""
279 USE_LARGE_FILES = undef
282 !IF "$(USE_PERLCRT)" == ""
286 !IF "$(USE_IMP_SYS)$(USE_MULTI)" == "defineundef"
290 !IF "$(USE_ITHREADS)$(USE_MULTI)" == "defineundef"
294 !IF "$(USE_SITECUST)" == "define"
295 BUILDOPT = $(BUILDOPT) -DUSE_SITECUSTOMIZE
298 !IF "$(USE_MULTI)" != "undef"
299 BUILDOPT = $(BUILDOPT) -DPERL_IMPLICIT_CONTEXT
302 !IF "$(USE_IMP_SYS)" != "undef"
303 BUILDOPT = $(BUILDOPT) -DPERL_IMPLICIT_SYS
306 !IF "$(PROCESSOR_ARCHITECTURE)" == ""
307 PROCESSOR_ARCHITECTURE = x86
311 !IF "$(PROCESSOR_ARCHITEW6432)" != ""
312 PROCESSOR_ARCHITECTURE = $(PROCESSOR_ARCHITEW6432)
315 !IF "$(PROCESSOR_ARCHITECTURE)" == "IA64"
323 !IF "$(PROCESSOR_ARCHITECTURE)" == "AMD64"
324 PROCESSOR_ARCHITECTURE = x86_64
326 !IF "$(PROCESSOR_ARCHITECTURE)" == "IA64"
327 PROCESSOR_ARCHITECTURE = ia64
330 !IF "$(USE_MULTI)" == "define"
331 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-multi
333 !IF "$(USE_PERLIO)" == "define"
334 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-perlio
336 ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)
340 !IF "$(USE_PERLIO)" == "define"
341 BUILDOPT = $(BUILDOPT) -DUSE_PERLIO
344 !IF "$(USE_ITHREADS)" == "define"
345 ARCHNAME = $(ARCHNAME)-thread
348 # Visual Studio 98 and .NET 2003 specific
349 # VC++ 6.x and 7.x can load DLL's on demand. Makes the test suite run in
350 # about 10% less time. (The free version of 7.x can't do this, however.)
351 # The addition of VC++ 8.x is currently an educated guess.
352 !IF "$(CCTYPE)" == "MSVC60" || "$(CCTYPE)" == "MSVC70" || "$(CCTYPE)" == "MSVC80"
353 DELAYLOAD = -DELAYLOAD:ws2_32.dll -DELAYLOAD:shell32.dll delayimp.lib
356 ARCHDIR = ..\lib\$(ARCHNAME)
357 COREDIR = ..\lib\CORE
358 AUTODIR = ..\lib\auto
362 EXTUTILSDIR = $(LIBDIR)\ExtUtils
366 INST_SCRIPT = $(INST_TOP)$(INST_VER)\bin
367 INST_BIN = $(INST_SCRIPT)$(INST_ARCH)
368 INST_LIB = $(INST_TOP)$(INST_VER)\lib
369 INST_ARCHLIB = $(INST_LIB)$(INST_ARCH)
370 INST_COREDIR = $(INST_ARCHLIB)\CORE
371 INST_HTML = $(INST_TOP)$(INST_VER)\html
374 # Programs to compile, build .lib files and link
379 LIB32 = $(LINK32) -lib
386 INCLUDES = -I$(COREDIR) -I.\include -I. -I..
387 #PCHFLAGS = -Fpc:\temp\vcmoduls.pch -YX
388 DEFINES = -DWIN32 -D_CONSOLE -DNO_STRICT $(CRYPT_FLAG)
389 LOCDEFS = -DPERLDLL -DPERL_CORE
393 !IF "$(USE_PERLCRT)" != "define"
399 !IF "$(CFG)" == "Debug"
400 ! IF "$(CCTYPE)" == "MSVC20"
401 OPTIMIZE = -Od -MD -Z7 -DDEBUGGING
403 OPTIMIZE = -Od -MD -Zi -DDEBUGGING
407 OPTIMIZE = -MD -Zi -DNDEBUG
408 # we enable debug symbols in release builds also
409 LINK_DBG = -debug -opt:ref,icf
410 # you may want to enable this if you want COFF symbols in the executables
411 # in addition to the PDB symbols. The default Dr. Watson that ships with
412 # Windows can use the the former but not latter. The free WinDbg can be
413 # installed to get better stack traces from just the PDB symbols, so we
414 # avoid the bloat of COFF symbols by default.
415 #LINK_DBG = $(LINK_DBG) -debugtype:both
416 ! IF "$(WIN64)" == "define"
417 # enable Whole Program Optimizations (WPO) and Link Time Code Generation (LTCG)
418 OPTIMIZE = $(OPTIMIZE) -Ox -GL
419 LINK_DBG = $(LINK_DBG) -ltcg
421 # -O1 yields smaller code, which turns out to be faster than -O2 on x86
422 OPTIMIZE = $(OPTIMIZE) -O1
423 #OPTIMIZE = $(OPTIMIZE) -O2
427 !IF "$(WIN64)" == "define"
428 DEFINES = $(DEFINES) -DWIN64 -DCONSERVATIVE
429 OPTIMIZE = $(OPTIMIZE) -Wp64 -fp:precise
432 !IF "$(USE_PERLCRT)" != "define"
433 BUILDOPT = $(BUILDOPT) -DPERL_MSVCRT_READFIX
436 LIBBASEFILES = $(CRYPT_LIB) \
437 oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \
438 comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \
439 netapi32.lib uuid.lib ws2_32.lib mpr.lib winmm.lib \
440 version.lib odbc32.lib odbccp32.lib
442 # The 64 bit Platform SDK compilers contain a runtime library that doesn't
443 # include the buffer overrun verification code used by the /GS switch.
444 # Since the code links against libraries that are compiled with /GS, this
445 # "security cookie verification" must be included via bufferoverlow.lib.
446 !IF "$(WIN64)" == "define"
447 LIBBASEFILES = $(LIBBASEFILES) bufferoverflowU.lib
450 # we add LIBC here, since we may be using PerlCRT.dll
451 LIBFILES = $(LIBBASEFILES) $(LIBC)
453 EXTRACFLAGS = -nologo -GF -W3
454 CFLAGS = $(EXTRACFLAGS) $(INCLUDES) $(DEFINES) $(LOCDEFS) \
455 $(PCHFLAGS) $(OPTIMIZE)
456 LINK_FLAGS = -nologo -nodefaultlib $(LINK_DBG) \
457 -libpath:"$(INST_COREDIR)" \
458 -machine:$(PROCESSOR_ARCHITECTURE)
462 CFLAGS_O = $(CFLAGS) $(BUILDOPT)
464 #################### do not edit below this line #######################
465 ############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ##############
473 .SUFFIXES : .c $(o) .dll .lib .exe .rc .res
476 $(CC) -c -I$(<D) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $<
482 $(LINK32) -dll -subsystem:windows -implib:$(*B).lib -def:$(*B).def \
483 -out:$@ $(LINK_FLAGS) $(LIBFILES) $< $(LIBPERL)
491 # makedef.pl must be updated if this changes, and this should normally
492 # only change when there is an incompatible revision of the public API.
493 PERLIMPLIB = ..\perl59.lib
494 PERLDLL = ..\perl59.dll
496 MINIPERL = ..\miniperl.exe
498 PERLEXE = ..\perl.exe
499 WPERLEXE = ..\wperl.exe
500 GLOBEXE = ..\perlglob.exe
501 CONFIGPM = ..\lib\Config.pm ..\lib\Config_heavy.pl
502 MINIMOD = ..\lib\ExtUtils\Miniperl.pm
505 # With the .NET 2.0 SDK, setargs.obj is not available with the .NET SDK. It
506 # only comes with Visual Studio 2005.
507 !IF "$(CCTYPE)" != "MSVC80FREE"
511 # Unicode data files generated by mktables
512 UNIDATAFILES = ..\lib\unicore\Canonical.pl ..\lib\unicore\Exact.pl \
513 ..\lib\unicore\Properties ..\lib\unicore\Decomposition.pl \
514 ..\lib\unicore\CombiningClass.pl ..\lib\unicore\Name.pl \
515 ..\lib\unicore\PVA.pl
517 # Directories of Unicode data files generated by mktables
518 UNIDATADIR1 = ..\lib\unicore\To
519 UNIDATADIR2 = ..\lib\unicore\lib
521 PERLEXE_ICO = .\perlexe.ico
522 PERLEXE_RES = .\perlexe.res
525 # Nominate a target which causes extensions to be re-built
526 # This used to be $(PERLEXE), but at worst it is the .dll that they depend
527 # on and really only the interface - i.e. the .def file used to export symbols
529 PERLDEP = perldll.def
531 PL2BAT = bin\pl2bat.pl
532 GLOBBAT = bin\perlglob.bat
549 ..\utils\config_data \
578 !IF "$(WIN64)" == "define"
579 CFGSH_TMPL = config.vc64
580 CFGH_TMPL = config_H.vc64
582 CFGSH_TMPL = config.vc
583 CFGH_TMPL = config_H.vc
586 XCOPY = xcopy /f /r /i /d /y
587 RCOPY = xcopy /f /r /i /e /d /y
594 # filenames given to xsubpp must have forward slashes (since it puts
595 # full pathnames in #line strings)
596 XSUBPP = ..\$(MINIPERL) -I..\..\lib ..\$(EXTUTILSDIR)\xsubpp \
636 EXTRACORE_SRC = $(EXTRACORE_SRC) perllib.c
638 !IF "$(PERL_MALLOC)" == "define"
639 EXTRACORE_SRC = $(EXTRACORE_SRC) ..\malloc.c
642 EXTRACORE_SRC = $(EXTRACORE_SRC) ..\perlio.c
649 # We need this for miniperl build unless we override canned
650 # config.h #define building mini\*
651 #!IF "$(USE_PERLIO)" == "define"
652 WIN32_SRC = $(WIN32_SRC) .\win32io.c
655 !IF "$(CRYPT_SRC)" != ""
656 WIN32_SRC = $(WIN32_SRC) .\$(CRYPT_SRC)
659 DLL_SRC = $(DYNALOADER).c
706 .\include\sys\socket.h \
709 CORE_H = $(CORE_NOCFG_H) .\config.h
711 MICROCORE_OBJ = $(MICROCORE_SRC:.c=.obj)
712 CORE_OBJ = $(MICROCORE_OBJ) $(EXTRACORE_SRC:.c=.obj)
713 WIN32_OBJ = $(WIN32_SRC:.c=.obj)
714 MINICORE_OBJ = $(MICROCORE_OBJ:..\=.\mini\) \
715 $(MINIDIR)\miniperlmain$(o) \
716 $(MINIDIR)\perlio$(o)
717 MINIWIN32_OBJ = $(WIN32_OBJ:.\=.\mini\)
718 MINI_OBJ = $(MINICORE_OBJ) $(MINIWIN32_OBJ)
719 DLL_OBJ = $(DLL_SRC:.c=.obj)
720 X2P_OBJ = $(X2P_SRC:.c=.obj)
722 PERLDLL_OBJ = $(CORE_OBJ)
723 PERLEXE_OBJ = perlmain$(o)
725 PERLDLL_OBJ = $(PERLDLL_OBJ) $(WIN32_OBJ) $(DLL_OBJ)
726 #PERLEXE_OBJ = $(PERLEXE_OBJ) $(WIN32_OBJ) $(DLL_OBJ)
728 !IF "$(USE_SETARGV)" != ""
729 SETARGV_OBJ = setargv$(o)
732 # specify static extensions here
733 #STATIC_EXT = Cwd Compress/Zlib
736 DYNALOADER = $(EXTDIR)\DynaLoader\DynaLoader
737 SOCKET = $(EXTDIR)\Socket\Socket
738 FCNTL = $(EXTDIR)\Fcntl\Fcntl
739 OPCODE = $(EXTDIR)\Opcode\Opcode
740 SDBM_FILE = $(EXTDIR)\SDBM_File\SDBM_File
742 POSIX = $(EXTDIR)\POSIX\POSIX
743 ATTRS = $(EXTDIR)\attrs\attrs
744 THREAD = $(EXTDIR)\Thread\Thread
747 DUMPER = $(EXTDIR)\Data\Dumper\Dumper
748 ERRNO = $(EXTDIR)\Errno\Errno
749 PEEK = $(EXTDIR)\Devel\Peek\Peek
750 BYTELOADER = $(EXTDIR)\ByteLoader\ByteLoader
751 DPROF = $(EXTDIR)\Devel\DProf\DProf
752 GLOB = $(EXTDIR)\File\Glob\Glob
753 HOSTNAME = $(EXTDIR)\Sys\Hostname\Hostname
754 STORABLE = $(EXTDIR)\Storable\Storable
755 FILTER = $(EXTDIR)\Filter\Util\Call\Call
756 ENCODE = $(EXTDIR)\Encode\Encode
757 MD5 = $(EXTDIR)\Digest\MD5\MD5
758 SHA = $(EXTDIR)\Digest\SHA\SHA
759 PERLIOSCALAR = $(EXTDIR)\PerlIO\scalar\scalar
760 MIMEBASE64 = $(EXTDIR)\MIME\Base64\Base64
761 TIMEHIRES = $(EXTDIR)\Time\HiRes\HiRes
762 CWD = $(EXTDIR)\Cwd\Cwd
763 LISTUTIL = $(EXTDIR)\List\Util\Util
764 HASHUTIL = $(EXTDIR)\Hash\Util\Util
765 PERLIOVIA = $(EXTDIR)\PerlIO\via\via
766 XSAPITEST = $(EXTDIR)\XS\APItest\APItest
767 XSTYPEMAP = $(EXTDIR)\XS\Typemap\Typemap
768 UNICODENORMALIZE = $(EXTDIR)\Unicode\Normalize\Normalize
769 MATHBIGINTFASTCALC = $(EXTDIR)\Math\BigInt\FastCalc\FastCalc
770 COMPRESSZLIB = $(EXTDIR)\Compress\Zlib\Zlib
771 WIN32_DIR = ext\Win32
773 SOCKET_DLL = $(AUTODIR)\Socket\Socket.dll
774 FCNTL_DLL = $(AUTODIR)\Fcntl\Fcntl.dll
775 OPCODE_DLL = $(AUTODIR)\Opcode\Opcode.dll
776 SDBM_FILE_DLL = $(AUTODIR)\SDBM_File\SDBM_File.dll
777 IO_DLL = $(AUTODIR)\IO\IO.dll
778 POSIX_DLL = $(AUTODIR)\POSIX\POSIX.dll
779 ATTRS_DLL = $(AUTODIR)\attrs\attrs.dll
780 THREAD_DLL = $(AUTODIR)\Thread\Thread.dll
781 B_DLL = $(AUTODIR)\B\B.dll
782 DUMPER_DLL = $(AUTODIR)\Data\Dumper\Dumper.dll
783 PEEK_DLL = $(AUTODIR)\Devel\Peek\Peek.dll
784 RE_DLL = $(AUTODIR)\re\re.dll
785 BYTELOADER_DLL = $(AUTODIR)\ByteLoader\ByteLoader.dll
786 DPROF_DLL = $(AUTODIR)\Devel\DProf\DProf.dll
787 GLOB_DLL = $(AUTODIR)\File\Glob\Glob.dll
788 HOSTNAME_DLL = $(AUTODIR)\Sys\Hostname\Hostname.dll
789 STORABLE_DLL = $(AUTODIR)\Storable\Storable.dll
790 FILTER_DLL = $(AUTODIR)\Filter\Util\Call\Call.dll
791 ENCODE_DLL = $(AUTODIR)\Encode\Encode.dll
792 MD5_DLL = $(AUTODIR)\Digest\MD5\MD5.dll
793 SHA_DLL = $(AUTODIR)\Digest\SHA\SHA.dll
794 PERLIOSCALAR_DLL = $(AUTODIR)\PerlIO\scalar\scalar.dll
795 MIMEBASE64_DLL = $(AUTODIR)\MIME\Base64\Base64.dll
796 TIMEHIRES_DLL = $(AUTODIR)\Time\HiRes\HiRes.dll
797 CWD_DLL = $(AUTODIR)\Cwd\Cwd.dll
798 LISTUTIL_DLL = $(AUTODIR)\List\Util\Util.dll
799 HASHUTIL_DLL = $(AUTODIR)\HASH\Util\Util.dll
800 PERLIOVIA_DLL = $(AUTODIR)\PerlIO\via\via.dll
801 XSAPITEST_DLL = $(AUTODIR)\XS\APItest\APItest.dll
802 XSTYPEMAP_DLL = $(AUTODIR)\XS\Typemap\Typemap.dll
803 UNICODENORMALIZE_DLL = $(AUTODIR)\Unicode\Normalize\Normalize.dll
804 MATHBIGINTFASTCALC_DLL = $(AUTODIR)\Math\BigInt\FastCalc\FastCalc.dll
805 COMPRESSZLIB_DLL = $(AUTODIR)\Compress\Zlib\Zlib.dll
806 WIN32_DLL = $(AUTODIR)\Win32\Win32.dll
839 $(UNICODENORMALIZE).c \
840 $(MATHBIGINTFASTCALC).c \
866 $(PERLIOSCALAR_DLL) \
875 $(UNICODENORMALIZE_DLL) \
876 $(MATHBIGINTFASTCALC_DLL) \
877 $(COMPRESSZLIB_DLL) \
881 "INST_DRV=$(INST_DRV)" \
882 "INST_TOP=$(INST_TOP)" \
883 "INST_VER=$(INST_VER)" \
884 "INST_ARCH=$(INST_ARCH)" \
885 "archname=$(ARCHNAME)" \
888 "ccflags=$(EXTRACFLAGS) $(OPTIMIZE:"=\") $(DEFINES) $(BUILDOPT)" \
889 "cf_email=$(EMAIL)" \
890 "d_crypt=$(D_CRYPT)" \
891 "d_mymalloc=$(PERL_MALLOC)" \
893 "incpath=$(CCINCDIR:"=\")" \
894 "libperl=$(PERLIMPLIB:..\=)" \
895 "libpth=$(CCLIBDIR:"=\");$(EXTRALIBDIRS:"=\")" \
897 "make=$(MAKE_BARE)" \
898 "static_ext=$(STATIC_EXT)" \
899 "usethreads=$(USE_ITHREADS)" \
900 "useithreads=$(USE_ITHREADS)" \
901 "usemultiplicity=$(USE_MULTI)" \
902 "useperlio=$(USE_PERLIO)" \
903 "uselargefiles=$(USE_LARGE_FILES)" \
904 "usesitecustomize=$(USE_SITECUST)" \
905 "LINK_FLAGS=$(LINK_FLAGS:"=\")" \
906 "optimize=$(OPTIMIZE:"=\")"
912 all : .\config.h $(GLOBEXE) $(MINIMOD) $(CONFIGPM) $(UNIDATAFILES) $(PERLEXE) \
914 @echo Everything is up to date. '$(MAKE_BARE) test' to run test suite.
916 $(DYNALOADER)$(o) : $(DYNALOADER).c $(CORE_H) $(EXTDIR)\DynaLoader\dlutils.c
918 #------------------------------------------------------------
920 $(GLOBEXE) : perlglob$(o)
922 $(LINK32) $(LINK_FLAGS) $(LIBFILES) -out:$@ -subsystem:$(SUBSYS) \
923 perlglob$(o) setargv$(o)
925 echo Skipping $(GLOBEXE)
928 perlglob$(o) : perlglob.c
930 config.w32 : $(CFGSH_TMPL)
931 copy $(CFGSH_TMPL) config.w32
933 .\config.h : $(CFGH_TMPL)
935 copy $(CFGH_TMPL) config.h
937 ..\config.sh : config.w32 $(MINIPERL) config_sh.PL
938 $(MINIPERL) -I..\lib config_sh.PL $(CFG_VARS) config.w32 > ..\config.sh
940 # this target is for when changes to the main config.sh happen
941 # edit config.{b,v,g}c and make this target once for each supported
942 # compiler (e.g. `nmake CCTYPE=BORLAND regen_config_h`)
944 perl config_sh.PL $(CFG_VARS) $(CFGSH_TMPL) > ..\config.sh
946 -del /f perl.exe perl*.dll
951 -perl config_h.PL "INST_VER=$(INST_VER)"
952 rename config.h $(CFGH_TMPL)
954 $(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl
958 if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL)
959 $(XCOPY) ..\*.h $(COREDIR)\*.*
960 $(XCOPY) *.h $(COREDIR)\*.*
961 $(XCOPY) ..\ext\re\re.pm $(LIBDIR)\*.*
962 $(RCOPY) include $(COREDIR)\*.*
963 -$(MINIPERL) -I..\lib config_h.PL "INST_VER=$(INST_VER)"
964 if errorlevel 1 $(MAKE) /$(MAKEFLAGS) $(CONFIGPM)
966 $(MINIPERL) : $(MINIDIR) $(MINI_OBJ)
967 $(LINK32) -subsystem:console -out:$@ @<<
968 $(LINK_FLAGS) $(LIBFILES) $(MINI_OBJ)
972 if not exist "$(MINIDIR)" mkdir "$(MINIDIR)"
974 $(MINICORE_OBJ) : $(CORE_NOCFG_H)
975 $(CC) -c $(CFLAGS) -DPERL_EXTERNAL_GLOB $(OBJOUT_FLAG)$@ ..\$(*F).c
977 $(MINIWIN32_OBJ) : $(CORE_NOCFG_H)
978 $(CC) -c $(CFLAGS) $(OBJOUT_FLAG)$@ $(*F).c
980 # -DPERL_IMPLICIT_SYS needs C++ for perllib.c
981 # This is the only file that depends on perlhost.h, vmem.h, and vdir.h
982 !IF "$(USE_IMP_SYS)" == "define"
983 perllib$(o) : perllib.c .\perlhost.h .\vdir.h .\vmem.h
984 $(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c
987 # 1. we don't want to rebuild miniperl.exe when config.h changes
988 # 2. we don't want to rebuild miniperl.exe with non-default config.h
989 $(MINI_OBJ) : $(CORE_NOCFG_H)
991 $(WIN32_OBJ) : $(CORE_H)
992 $(CORE_OBJ) : $(CORE_H)
993 $(DLL_OBJ) : $(CORE_H)
994 $(X2P_OBJ) : $(CORE_H)
996 perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym ..\pp.sym ..\makedef.pl
997 $(MINIPERL) -I..\lib buildext.pl --create-perllibst-h
998 $(MINIPERL) -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) $(BUILDOPT) \
999 CCTYPE=$(CCTYPE) > perldll.def
1001 $(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES) Extensions_static
1002 $(LINK32) -dll -def:perldll.def -base:0x28000000 -out:$@ @Extensions_static @<<
1003 $(LINK_FLAGS) $(DELAYLOAD) $(LIBFILES) $(PERLDLL_OBJ) $(PERLDLL_RES)
1005 $(XCOPY) $(PERLIMPLIB) $(COREDIR)
1007 $(PERLEXE_ICO): $(MINIPERL) makeico.pl
1008 $(MINIPERL) makeico.pl > $@
1010 $(PERLEXE_RES): perlexe.rc $(PERLEXE_ICO)
1012 $(MINIMOD) : $(MINIPERL) ..\minimod.pl
1014 miniperl minimod.pl > lib\ExtUtils\Miniperl.pm
1017 ..\x2p\a2p$(o) : ..\x2p\a2p.c
1018 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\a2p.c
1020 ..\x2p\hash$(o) : ..\x2p\hash.c
1021 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\hash.c
1023 ..\x2p\str$(o) : ..\x2p\str.c
1024 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\str.c
1026 ..\x2p\util$(o) : ..\x2p\util.c
1027 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\util.c
1029 ..\x2p\walk$(o) : ..\x2p\walk.c
1030 $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\walk.c
1032 $(X2P) : $(MINIPERL) $(X2P_OBJ)
1033 $(MINIPERL) ..\x2p\find2perl.PL
1034 $(MINIPERL) ..\x2p\s2p.PL
1035 $(LINK32) -subsystem:console -out:$@ @<<
1036 $(LINK_FLAGS) $(LIBFILES) $(X2P_OBJ)
1039 perlmain.c : runperl.c
1040 copy runperl.c perlmain.c
1042 perlmain$(o) : perlmain.c
1043 $(CC) $(CFLAGS_O) -UPERLDLL $(OBJOUT_FLAG)$@ -c perlmain.c
1045 $(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES)
1046 $(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(LINK_FLAGS) \
1047 $(LIBFILES) $(PERLEXE_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB) $(PERLEXE_RES)
1048 copy $(PERLEXE) $(WPERLEXE)
1049 $(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS
1050 copy splittree.pl ..
1051 $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
1053 $(DYNALOADER).c: $(MINIPERL) $(EXTDIR)\DynaLoader\dl_win32.xs $(CONFIGPM)
1054 if not exist $(AUTODIR) mkdir $(AUTODIR)
1056 ..\$(MINIPERL) -I..\..\lib $(*B)_pm.PL
1057 ..\$(MINIPERL) -I..\..\lib XSLoader_pm.PL
1059 $(XCOPY) $(EXTDIR)\$(*B)\$(*B).pm $(LIBDIR)\$(NULL)
1060 $(XCOPY) $(EXTDIR)\$(*B)\XSLoader.pm $(LIBDIR)\$(NULL)
1062 $(XSUBPP) dl_win32.xs > $(*B).c
1065 $(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs
1066 copy dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs
1068 #-------------------------------------------------------------------------------
1069 Extensions: buildext.pl $(PERLDEP) $(CONFIGPM)
1070 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) --dynamic
1071 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext --dynamic
1073 Extensions_static : buildext.pl
1074 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) --static
1075 $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext --static
1076 $(MINIPERL) -I..\lib buildext.pl --list-static-libs > Extensions_static
1079 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) clean
1080 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext clean
1082 Extensions_realclean:
1083 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) realclean
1084 -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext realclean
1086 #-------------------------------------------------------------------------------
1089 $(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=$(HTMLDIR) \
1090 --podpath=pod:lib:ext:utils --htmlroot="file://$(INST_HTML::=|)" \
1091 --libpod=perlfunc:perlguts:perlvar:perlrun:perlop --recurse
1093 # Note that this next section is parsed (and regenerated) by pod/buildtoc
1094 # so please check that script before making structural changes here
1096 utils: $(PERLEXE) $(X2P)
1098 $(MAKE) PERL=$(MINIPERL)
1100 copy ..\vms\perlvms.pod .\perlvms.pod
1101 copy ..\README.aix ..\pod\perlaix.pod
1102 copy ..\README.amiga ..\pod\perlamiga.pod
1103 copy ..\README.apollo ..\pod\perlapollo.pod
1104 copy ..\README.beos ..\pod\perlbeos.pod
1105 copy ..\README.bs2000 ..\pod\perlbs2000.pod
1106 copy ..\README.ce ..\pod\perlce.pod
1107 copy ..\README.cn ..\pod\perlcn.pod
1108 copy ..\README.cygwin ..\pod\perlcygwin.pod
1109 copy ..\README.dgux ..\pod\perldgux.pod
1110 copy ..\README.dos ..\pod\perldos.pod
1111 copy ..\README.epoc ..\pod\perlepoc.pod
1112 copy ..\README.freebsd ..\pod\perlfreebsd.pod
1113 copy ..\README.hpux ..\pod\perlhpux.pod
1114 copy ..\README.hurd ..\pod\perlhurd.pod
1115 copy ..\README.irix ..\pod\perlirix.pod
1116 copy ..\README.jp ..\pod\perljp.pod
1117 copy ..\README.ko ..\pod\perlko.pod
1118 copy ..\README.linux ..\pod\perllinux.pod
1119 copy ..\README.machten ..\pod\perlmachten.pod
1120 copy ..\README.macos ..\pod\perlmacos.pod
1121 copy ..\README.macosx ..\pod\perlmacosx.pod
1122 copy ..\README.mint ..\pod\perlmint.pod
1123 copy ..\README.mpeix ..\pod\perlmpeix.pod
1124 copy ..\README.netware ..\pod\perlnetware.pod
1125 copy ..\README.openbsd ..\pod\perlopenbsd.pod
1126 copy ..\README.os2 ..\pod\perlos2.pod
1127 copy ..\README.os390 ..\pod\perlos390.pod
1128 copy ..\README.os400 ..\pod\perlos400.pod
1129 copy ..\README.plan9 ..\pod\perlplan9.pod
1130 copy ..\README.qnx ..\pod\perlqnx.pod
1131 copy ..\README.solaris ..\pod\perlsolaris.pod
1132 copy ..\README.symbian ..\pod\perlsymbian.pod
1133 copy ..\README.tru64 ..\pod\perltru64.pod
1134 copy ..\README.tw ..\pod\perltw.pod
1135 copy ..\README.uts ..\pod\perluts.pod
1136 copy ..\README.vmesa ..\pod\perlvmesa.pod
1137 copy ..\README.vms ..\pod\perlvms.pod
1138 copy ..\README.vos ..\pod\perlvos.pod
1139 copy ..\README.win32 ..\pod\perlwin32.pod
1140 copy ..\pod\perl594delta.pod ..\pod\perldelta.pod
1141 $(MAKE) -f ..\win32\pod.mak converters
1143 $(PERLEXE) lib_pm.PL
1145 $(PERLEXE) $(PL2BAT) $(UTILS)
1147 # Note that the pod cleanup in this next section is parsed (and regenerated
1148 # by pod/buildtoc so please check that script before making changes here
1150 distclean: realclean
1151 -del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \
1152 $(PERLIMPLIB) ..\miniperl.lib $(MINIMOD)
1154 -del /f $(EXTENSION_DLL)
1155 -del /f $(EXTENSION_C) $(DYNALOADER).c $(ERRNO).pm
1156 -del /f $(EXTDIR)\DynaLoader\dl_win32.xs
1157 -del /f $(EXTDIR)\DynaLoader\DynaLoader.pm
1158 -del /f $(EXTDIR)\DynaLoader\XSLoader.pm
1159 -del /f $(LIBDIR)\Encode.pm $(LIBDIR)\encoding.pm $(LIBDIR)\Errno.pm
1160 -del /f $(LIBDIR)\Config.pod $(LIBDIR)\POSIX.pod $(LIBDIR)\threads.pm
1161 -del /f $(LIBDIR)\.exists $(LIBDIR)\attrs.pm $(LIBDIR)\DynaLoader.pm
1162 -del /f $(LIBDIR)\XSLoader.pm $(LIBDIR)\lib.pm
1163 -del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm
1164 -del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm
1165 -del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm
1166 -del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm
1167 -del /f $(LIBDIR)\ByteLoader.pm
1168 -del /f $(LIBDIR)\Devel\Peek.pm $(LIBDIR)\Devel\DProf.pm
1169 -del /f $(LIBDIR)\Devel\PPPort.pm
1170 -del /f $(LIBDIR)\File\Glob.pm
1171 -del /f $(LIBDIR)\Storable.pm
1172 -del /f $(LIBDIR)\Digest\MD5.pm
1173 -del /f $(LIBDIR)\Digest\SHA.pm
1174 -del /f $(LIBDIR)\PerlIO\encoding.pm
1175 -del /f $(LIBDIR)\PerlIO\scalar.pm
1176 -del /f $(LIBDIR)\PerlIO\via.pm
1177 -del /f $(LIBDIR)\Sys\Hostname.pm
1178 -del /f $(LIBDIR)\Thread\Signal.pm $(LIBDIR)\Thread\Specific.pm
1179 -del /f $(LIBDIR)\threads\shared.pm
1180 -del /f $(LIBDIR)\Time\HiRes.pm
1181 -del /f $(LIBDIR)\Unicode\Normalize.pm
1182 -del /f $(LIBDIR)\Math\BigInt\FastCalc.pm
1183 -del /f $(LIBDIR)\Win32.pm
1184 -if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B
1185 -if exist $(LIBDIR)\Compress rmdir /s /q $(LIBDIR)\Compress
1186 -if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data
1187 -if exist $(LIBDIR)\Encode rmdir /s /q $(LIBDIR)\Encode
1188 -if exist $(LIBDIR)\Filter\Util rmdir /s /q $(LIBDIR)\Filter\Util
1189 -if exist $(LIBDIR)\Hash rmdir /s /q $(LIBDIR)\Hash
1190 -if exist $(LIBDIR)\IO\Compress rmdir /s /q $(LIBDIR)\IO\Compress
1191 -if exist $(LIBDIR)\IO\Socket rmdir /s /q $(LIBDIR)\IO\Socket
1192 -if exist $(LIBDIR)\IO\Uncompress rmdir /s /q $(LIBDIR)\IO\Uncompress
1193 -if exist $(LIBDIR)\List rmdir /s /q $(LIBDIR)\List
1194 -if exist $(LIBDIR)\MIME rmdir /s /q $(LIBDIR)\MIME
1195 -if exist $(LIBDIR)\Scalar rmdir /s /q $(LIBDIR)\Scalar
1196 -if exist $(LIBDIR)\Sys rmdir /s /q $(LIBDIR)\Sys
1197 -if exist $(LIBDIR)\threads rmdir /s /q $(LIBDIR)\threads
1198 -if exist $(LIBDIR)\XS rmdir /s /q $(LIBDIR)\XS
1199 -cd $(PODDIR) && del /f *.html *.bat checkpods \
1200 perlaix.pod perlamiga.pod perlapollo.pod perlbeos.pod \
1201 perlbs2000.pod perlce.pod perlcn.pod perlcygwin.pod \
1202 perldelta.pod perldgux.pod perldos.pod perlepoc.pod \
1203 perlfreebsd.pod perlhpux.pod perlhurd.pod perlirix.pod \
1204 perljp.pod perlko.pod perllinux.pod perlmachten.pod \
1205 perlmacos.pod perlmacosx.pod perlmint.pod perlmpeix.pod \
1206 perlnetware.pod perlopenbsd.pod perlos2.pod perlos390.pod \
1207 perlos400.pod perlplan9.pod perlqnx.pod perlsolaris.pod \
1208 perlsymbian.pod perltru64.pod perltw.pod perluts.pod \
1209 perlvmesa.pod perlvms.pod perlvms.pod perlvos.pod perlwin32.pod \
1210 pod2html pod2latex pod2man pod2text pod2usage \
1211 podchecker podselect
1212 -cd ..\utils && del /f h2ph splain perlbug pl2pm c2ph pstruct h2xs \
1213 perldoc perlivp dprofpp perlcc libnetcfg enc2xs piconv cpan *.bat \
1214 xsubpp instmodsh prove ptar ptardiff shasum corelist config_data
1215 -cd ..\x2p && del /f find2perl s2p psed *.bat
1216 -del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c config.h.new
1220 -del /f $(PERLEXE_ICO) perl.base
1221 -cd .. && del /s *.lib *.map *.pdb *.ilk *.bs *$(o) .exists pm_to_blib
1222 -cd $(EXTDIR) && del /s *.def Makefile Makefile.old
1223 -if exist $(AUTODIR) rmdir /s /q $(AUTODIR)
1224 -if exist $(COREDIR) rmdir /s /q $(COREDIR)
1225 -if exist pod2htmd.tmp del pod2htmd.tmp
1226 -if exist pod2htmi.tmp del pod2htmi.tmp
1227 -if exist $(HTMLDIR) rmdir /s /q $(HTMLDIR)
1229 install : all installbare installhtml
1232 $(PERLEXE) ..\installperl
1233 if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.*
1234 $(XCOPY) $(GLOBEXE) $(INST_BIN)\*.*
1235 if exist ..\perl*.pdb $(XCOPY) ..\perl*.pdb $(INST_BIN)\*.*
1236 if exist ..\x2p\a2p.pdb $(XCOPY) ..\x2p\a2p.pdb $(INST_BIN)\*.*
1237 $(XCOPY) bin\*.bat $(INST_SCRIPT)\*.*
1240 $(RCOPY) $(HTMLDIR)\*.* $(INST_HTML)\*.*
1242 inst_lib : $(CONFIGPM)
1243 copy splittree.pl ..
1244 $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
1245 $(RCOPY) ..\lib $(INST_LIB)\*.*
1247 $(UNIDATAFILES) : $(MINIPERL) $(CONFIGPM) ..\lib\unicore\mktables
1248 cd ..\lib\unicore && \
1249 ..\$(MINIPERL) -I.. mktables
1251 minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) utils $(UNIDATAFILES)
1252 $(XCOPY) $(MINIPERL) ..\t\$(NULL)
1253 if exist ..\t\perl.exe del /f ..\t\perl.exe
1254 rename ..\t\miniperl.exe perl.exe
1255 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1258 $(MINIPERL) -I..\lib harness base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t
1260 test-prep : all utils
1261 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1262 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1263 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1267 $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
1270 test-notty : test-prep
1271 set PERL_SKIP_TTY_TEST=1
1273 $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
1277 $(XCOPY) $(PERLEXE) ..\t\$(NULL)
1278 $(XCOPY) $(PERLDLL) ..\t\$(NULL)
1279 $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
1281 $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
1285 -@$(DEL) miniperlmain$(o)
1286 -@$(DEL) $(MINIPERL)
1287 -@$(DEL) perlglob$(o)
1288 -@$(DEL) perlmain$(o)
1293 -@$(DEL) $(WPERLEXE)
1295 -@$(DEL) $(CORE_OBJ)
1296 -if exist $(MINIDIR) rmdir /s /q $(MINIDIR)
1297 -if exist $(UNIDATADIR1) rmdir /s /q $(UNIDATADIR1)
1298 -if exist $(UNIDATADIR2) rmdir /s /q $(UNIDATADIR2)
1299 -@$(DEL) $(UNIDATAFILES)
1300 -@$(DEL) $(WIN32_OBJ)
1303 -@$(DEL) ..\*$(o) ..\*.lib ..\*.exp *$(o) *.lib *.exp *.res
1304 -@$(DEL) ..\t\*.exe ..\t\*.dll ..\t\*.bat
1305 -@$(DEL) ..\x2p\*.exe ..\x2p\*.bat
1308 -@$(DEL) Extensions_static
1310 clean : Extensions_clean _clean
1312 realclean : Extensions_realclean _clean
1314 # Handy way to run perlbug -ok without having to install and run the
1315 # installed perlbug. We don't re-run the tests here - we trust the user.
1316 # Please *don't* use this unless all tests pass.
1317 # If you want to report test failures, use "nmake nok" instead.
1319 $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)"
1322 $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" -F perl.ok
1325 $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)"
1328 $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" -F perl.nok