7 # List explicitly here the variables you want Configure to
8 # generate. Metaconfig only looks for shell variables, so you
9 # have to mention them as if they were shell variables, not
15 # This forces PL files to create target in same directory as PL file.
16 # This is so that make depend always knows where to find PL derivatives.
19 my $file = basename($0, '.PL');
20 $file .= '.com' if $^O eq 'VMS';
23 open OUT,">$file" or die "Can't create $file: $!";
25 print "Extracting $file (with variable substitutions)\n";
27 # In this section, perl variables will be expanded during extraction.
28 # You can use $Config{...} to use Configure variables.
30 print OUT <<"!GROK!THIS!";
32 eval 'exec $Config{'perlpath'} -S \$0 \${1+"\$@"}'
33 if \$running_under_some_shell;
36 print OUT "\n# perlivp $^V\n";
38 # In the following, perl variables are not expanded during extraction.
40 print OUT <<'!NO!SUBS!';
47 $0 [-a] [-p] [-v] | [-h]
49 -a Run all tests (default is to skip .ph tests)
50 -p Print a preface before each test telling what it will test.
51 -v Verbose mode in which extra information about test results
52 is printed. Test failures always print out some extra information
53 regardless of whether or not this switch is set.
54 -h Prints this help message.
59 use vars qw(%opt); # allow testing with older versions (do not use our)
61 @opt{ qw/? H h P p V v/ } = qw(0 0 0 0 0 0 0);
63 while ($ARGV[0] =~ /^-/) {
65 for my $flag (split(//,$ARGV[0])) {
66 usage() if '?' =~ /\Q$flag/;
67 usage() if 'h' =~ /\Q$flag/;
68 usage() if 'H' =~ /\Q$flag/;
69 usage("unknown flag: `$flag'") unless 'HhPpVva' =~ /\Q$flag/;
70 warn "$0: `$flag' flag already set\n" if $opt{$flag}++;
84 # We cannot merely check the variable `$^X' in general since on many
85 # Unixes it is the basename rather than the full path to the perl binary.
87 if (defined($Config{'perlpath'})) { $perlpath = $Config{'perlpath'}; }
89 # The useithreads Config variable plays a role in whether or not
90 # threads and threads/shared work when C<use>d. They apparently always
91 # get installed on systems that can run Configure.
93 if (defined($Config{'useithreads'})) { $useithreads = $Config{'useithreads'}; }
95 print OUT <<"!GROK!THIS!";
96 my \$perlpath = '$perlpath';
97 my \$useithreads = '$useithreads';
100 print OUT <<'!NO!SUBS!';
102 print "## Checking Perl binary via variable `\$perlpath' = $perlpath.\n" if $opt{'p'};
105 print "## Perl binary `$perlpath' appears executable.\n" if $opt{'v'};
110 print "# Perl binary `$perlpath' does not appear executable.\n";
117 print "## Checking Perl version via variable `\$]'.\n" if $opt{'p'};
121 print OUT <<"!GROK!THIS!";
122 my \$ivp_VERSION = "$]";
125 print OUT <<'!NO!SUBS!';
126 if ($ivp_VERSION eq $]) {
127 print "## Perl version `$]' appears installed as expected.\n" if $opt{'v'};
132 print "# Perl version `$]' installed, expected $ivp_VERSION.\n";
139 print "## Checking roots of the Perl library directory tree via variable `\@INC'.\n" if $opt{'p'};
144 next if $_ eq '.'; # skip -d test here
145 if ($^O eq 'MacOS') {
146 next if $_ eq ':'; # skip -d test here
147 next if $_ eq 'Dev:Pseudo:'; # why is this in @INC?
150 print "## Perl \@INC directory `$_' exists.\n" if $opt{'v'};
154 print "# Perl \@INC directory `$_' does not appear to exist.\n";
158 if ($INC_total == $INC_there) {
169 print "## Checking installations of modules necessary for ivp.\n" if $opt{'p'};
171 my $needed_total = 0;
172 my $needed_there = 0;
173 foreach (qw(Config.pm ExtUtils/Installed.pm)) {
176 eval "require \"$_\";";
178 print "## Module `$_' appears to be installed.\n" if $opt{'v'};
182 print "# Needed module `$_' does not appear to be properly installed.\n";
186 if ($needed_total == $needed_there) {
197 print "## Checking installations of extensions built with perl.\n" if $opt{'p'};
201 my $extensions_total = 0;
202 my $extensions_there = 0;
203 if (defined($Config{'extensions'})) {
204 my @extensions = split(/\s+/,$Config{'extensions'});
205 foreach (@extensions) {
207 if ( $useithreads !~ /define/i ) {
208 next if ($_ eq 'threads');
209 next if ($_ eq 'threads/shared');
211 # that's a distribution name, not a module name
212 next if $_ eq 'IO/Compress';
213 next if $_ eq 'Devel/DProf';
215 next if $_ eq 'XS/APItest';
216 next if $_ eq 'XS/APItest/KeywordRPN';
217 next if $_ eq 'XS/Typemap';
218 # VMS$ perl -e "eval ""require \""Devel/DProf.pm\"";"" print $@"
219 # \NT> perl -e "eval \"require 'Devel/DProf.pm'\"; print $@"
220 # DProf: run perl with -d to use DProf.
221 # Compilation failed in require at (eval 1) line 1.
222 eval " require \"$_.pm\"; ";
224 print "## Module `$_' appears to be installed.\n" if $opt{'v'};
228 print "# Required module `$_' does not appear to be properly installed.\n";
234 # A silly name for a module (that hopefully won't ever exist).
235 # Note that this test serves more as a check of the validity of the
236 # actuall required module tests above.
237 my $unnecessary = 'bLuRfle';
239 if (!grep(/$unnecessary/, @extensions)) {
241 eval " require \"$unnecessary.pm\"; ";
243 print "## Unnecessary module `$unnecessary' does not appear to be installed.\n" if $opt{'v'};
246 print "# Unnecessary module `$unnecessary' appears to be installed.\n";
252 if ($extensions_total == $extensions_there) {
263 print "## Checking installations of later additional extensions.\n" if $opt{'p'};
265 use ExtUtils::Installed;
267 my $installed_total = 0;
268 my $installed_there = 0;
269 my $version_check = 0;
270 my $installed = ExtUtils::Installed -> new();
271 my @modules = $installed -> modules();
276 # Consider it there if it contains one or more files,
277 # and has zero missing files,
278 # and has a defined version
280 $version = $installed -> version($_);
282 print "## $_; $version\n" if $opt{'v'};
286 print "# $_; NO VERSION\n" if $opt{'v'};
290 @missing = $installed -> validate($_);
292 # .bs files are optional
293 @missing = grep { ! /\.bs$/ } @missing;
294 # man files are often compressed
295 @missing = grep { ! ( -s "$_.gz" || -s "$_.bz2" ) } @missing;
297 if ($#missing >= 0) {
298 print "# file",+($#missing == 0) ? '' : 's'," missing from installation:\n";
299 print '# ',join(' ',@missing),"\n";
301 elsif ($#missing == -1) {
306 if (($installed_total == $installed_there) &&
307 ($installed_total == $version_check)) {
319 print "## Checking installations of *.h -> *.ph header files.\n" if $opt{'p'};
324 # Just about "any" C implementation ought to have a stdio.h (even if
325 # Config.pm may not list a i_stdio var).
326 my @ph_files = qw(stdio.ph);
327 # Add the ones that we know that perl thinks are there:
328 while (($var, $val) = each %Config) {
329 if ($var =~ m/i_(.+)/ && $val eq 'define') {
331 # Some header and symbol names don't match for hysterical raisins.
332 $h_file = 'arpa/inet' if $h_file eq 'arpainet';
333 $h_file = 'netinet/in' if $h_file eq 'niin';
334 $h_file = 'netinet/tcp' if $h_file eq 'netinettcp';
335 $h_file = 'sys/resource' if $h_file eq 'sysresrc';
336 $h_file = 'sys/select' if $h_file eq 'sysselct';
337 $h_file = 'sys/security' if $h_file eq 'syssecrt';
338 $h_file = 'rpcsvc/dbm' if $h_file eq 'rpcsvcdbm';
339 # This ought to distinguish syslog from sys/syslog.
340 # (NB syslog.ph is heavily used for the DBI pre-requisites).
341 $h_file =~ s{^sys(\w.+)}{sys/$1} unless $h_file eq 'syslog';
342 push(@ph_files, "$h_file.ph");
345 #foreach (qw(stdio.ph syslog.ph)) {
346 foreach (@ph_files) {
348 eval "require \"$_\";";
350 print "## Perl header `$_' appears to be installed.\n" if $opt{'v'};
354 print "# Perl header `$_' does not appear to be properly installed.\n";
359 if (scalar(@ph_files) == $ph_there) {
370 print "## Skip checking of *.ph header files.\n" if $opt{'p'};
373 # Final report (rather than feed ousrselves to Test::Harness::runtests()
374 # we simply format some output on our own to keep things simple and
375 # easier to "fix" - at least for now.
377 if ($error_total == 0 && $tests_total) {
378 print "All tests successful.\n";
379 } elsif ($tests_total==0){
380 die "FAILED--no tests were run for some reason.\n";
383 if ($tests_total > 0) { $rate = sprintf "%.2f", 100.0 * ($pass__total / $tests_total); }
384 printf " %d/%d subtests failed, %.2f%% okay.\n",
385 $error_total, $tests_total, $rate;
390 perlivp - Perl Installation Verification Procedure
394 B<perlivp> [B<-a>] [B<-p>] [B<-v>] [B<-h>]
398 The B<perlivp> program is set up at Perl source code build time to test the
399 Perl version it was built under. It can be used after running:
403 (or your platform's equivalent procedure) to verify that B<perl> and its
404 libraries have been installed correctly. A correct installation is verified
405 by output that looks like:
418 Prints out a brief help message.
420 =item B<-a> run all tests
422 Normally tests for optional features are skipped. With -a all tests
425 =item B<-p> print preface
427 Gives a description of each test prior to performing it.
431 Gives more detailed information about each test, after it has been performed.
432 Note that any failed tests ought to print out some extra information whether
441 =item * print "# Perl binary `$perlpath' does not appear executable.\n";
443 Likely to occur for a perl binary that was not properly installed.
444 Correct by conducting a proper installation.
446 =item * print "# Perl version `$]' installed, expected $ivp_VERSION.\n";
448 Likely to occur for a perl that was not properly installed.
449 Correct by conducting a proper installation.
451 =item * print "# Perl \@INC directory `$_' does not appear to exist.\n";
453 Likely to occur for a perl library tree that was not properly installed.
454 Correct by conducting a proper installation.
456 =item * print "# Needed module `$_' does not appear to be properly installed.\n";
458 One of the two modules that is used by perlivp was not present in the
459 installation. This is a serious error since it adversely affects perlivp's
460 ability to function. You may be able to correct this by performing a
461 proper perl installation.
463 =item * print "# Required module `$_' does not appear to be properly installed.\n";
465 An attempt to C<eval "require $module"> failed, even though the list of
466 extensions indicated that it should succeed. Correct by conducting a proper
469 =item * print "# Unnecessary module `bLuRfle' appears to be installed.\n";
471 This test not coming out ok could indicate that you have in fact installed
472 a bLuRfle.pm module or that the C<eval " require \"$module_name.pm\"; ">
473 test may give misleading results with your installation of perl. If yours
474 is the latter case then please let the author know.
476 =item * print "# file",+($#missing == 0) ? '' : 's'," missing from installation:\n";
478 One or more files turned up missing according to a run of
479 C<ExtUtils::Installed -E<gt> validate()> over your installation.
480 Correct by conducting a proper installation.
482 =item * print "# Perl header `$_' does not appear to be properly installed.\n";
484 Correct by running B<h2ph> over your system's C header files. If necessary,
485 edit the resulting *.ph files to eliminate perl syntax errors.
489 For further information on how to conduct a proper installation consult the
490 INSTALL file that comes with the perl source and the README file for your
501 close OUT or die "Can't close $file: $!";
502 chmod 0755, $file or die "Can't reset permissions for $file: $!\n";
503 exec("$Config{'eunicefix'} $file") if $Config{'eunicefix'} ne ':';