4 use File::Basename qw(&basename &dirname);
6 use File::Spec::Functions;
8 # List explicitly here the variables you want Configure to
9 # generate. Metaconfig only looks for shell variables, so you
10 # have to mention them as if they were shell variables, not
11 # %Config entries. Thus you write
13 # to ensure Configure will look for $Config{startperl}.
16 # This forces PL files to create target in same directory as PL file.
17 # This is so that make depend always knows where to find PL derivatives.
20 $file = basename($0, '.PL');
21 $file .= '.com' if $^O eq 'VMS';
23 open OUT, ">$file" or die "Can't create $file: $!";
25 # extract patchlevel.h information
27 open PATCH_LEVEL, "<" . catfile(updir, "patchlevel.h")
28 or die "Can't open patchlevel.h: $!";
30 my $patchlevel_date = (stat PATCH_LEVEL)[9];
32 while (<PATCH_LEVEL>) {
33 last if $_ =~ /^\s*static\s+(?:const\s+)?char.*?local_patches\[\]\s*=\s*{\s*$/;
37 warn "Warning: local_patches section not found in patchlevel.h\n";
41 while (<PATCH_LEVEL>) {
43 next if /^\s*#/; # preprocessor stuff
48 push @patches, $_ unless $_ eq 'NULL';
50 my $patch_desc = "'" . join("',\n '", @patches) . "'";
51 my $patch_tags = join "", map /(\S+)/ ? "+$1 " : (), @patches;
53 close(PATCH_LEVEL) or die "Error closing patchlevel.h: $!";
55 # TO DO (prehaps): store/embed $Config::config_sh into perlbug. When perlbug is
56 # used, compare $Config::config_sh with the stored version. If they differ then
57 # append a list of individual differences to the bug report.
60 print "Extracting $file (with variable substitutions)\n";
62 # In this section, perl variables will be expanded during extraction.
63 # You can use $Config{...} to use Configure variables.
65 my $extract_version = sprintf("%vd", $^V);
67 print OUT <<"!GROK!THIS!";
69 eval 'exec $Config{perlpath} -S \$0 \${1+"\$@"}'
70 if \$running_under_some_shell;
72 my \$config_tag1 = '$extract_version - $Config{cf_time}';
74 my \$patchlevel_date = $patchlevel_date;
75 my \$patch_tags = '$patch_tags';
81 # In the following, perl variables are not expanded during extraction.
83 print OUT <<'!NO!SUBS!';
86 no warnings 'once'; # Eventually, the $::opt_ stuff should get cleaned up
89 use File::Spec; # keep perlbug Perl 5.005 compatible
91 use File::Basename 'basename';
96 eval { require Mail::Send;};
97 $::HaveSend = ($@ eq "");
98 eval { require Mail::Util; } ;
99 $::HaveUtil = ($@ eq "");
100 # use secure tempfiles wherever possible
101 eval { require File::Temp; };
102 $::HaveTemp = ($@ eq "");
103 eval { require Module::CoreList; };
104 $::HaveCoreList = ($@ eq "");
107 my $Version = "1.39";
109 # Changed in 1.06 to skip Mail::Send and Mail::Util if not available.
110 # Changed in 1.07 to see more sendmail execs, and added pipe output.
111 # Changed in 1.08 to use correct address for sendmail.
112 # Changed in 1.09 to close the REP file before calling it up in the editor.
113 # Also removed some old comments duplicated elsewhere.
114 # Changed in 1.10 to run under VMS without Mail::Send; also fixed
115 # temp filename generation.
116 # Changed in 1.11 to clean up some text and removed Mail::Send deactivator.
117 # Changed in 1.12 to check for editor errors, make save/send distinction
118 # clearer and add $ENV{REPLYTO}.
119 # Changed in 1.13 to hopefully make it more difficult to accidentally
121 # Changed in 1.14 to make the prompts a little more clear on providing
122 # helpful information. Also let file read fail gracefully.
123 # Changed in 1.15 to add warnings to stop people using perlbug for non-bugs.
124 # Also report selected environment variables.
125 # Changed in 1.16 to include @INC, and allow user to re-edit if no changes.
126 # Changed in 1.17 Win32 support added. GSAR 97-04-12
127 # Changed in 1.18 add '-ok' option for reporting build success. CFR 97-06-18
128 # Changed in 1.19 '-ok' default not '-v'
129 # add local patch information
130 # warn on '-ok' if this is an old system; add '-okay'
131 # Changed in 1.20 Added patchlevel.h reading and version/config checks
132 # Changed in 1.21 Added '-nok' for reporting build failure DFD 98-05-05
133 # Changed in 1.22 Heavy reformatting & minor bugfixes HVDS 98-05-10
134 # Changed in 1.23 Restore -ok(ay): say 'success'; don't prompt
135 # Changed in 1.24 Added '-F<file>' to save report HVDS 98-07-01
136 # Changed in 1.25 Warn on failure to open save file. HVDS 98-07-12
137 # Changed in 1.26 Don't require -t STDIN for -ok. HVDS 98-07-15
138 # Changed in 1.27 Added Mac OS and File::Spec support CNANDOR 99-07-27
139 # Changed in 1.28 Additional questions for Perlbugtron RFOLEY 20.03.2000
140 # Changed in 1.29 Perlbug(tron): auto(-ok), short prompts RFOLEY 05-05-2000
141 # Changed in 1.30 Added warnings on failure to open files MSTEVENS 13-07-2000
142 # Changed in 1.31 Add checks on close().Fix my $var unless. TJENNESS 26-07-2000
143 # Changed in 1.32 Use File::Spec->tmpdir TJENNESS 20-08-2000
144 # Changed in 1.33 Don't require -t STDOUT for -ok.
145 # Changed in 1.34 Added Message-Id RFOLEY 18-06-2002
146 # Changed in 1.35 Use File::Temp (patch from Solar Designer) NWCLARK 28-02-2004
147 # Changed in 1.36 Initial Module::CoreList support Alexandr Ciornii 11-07-2007
148 # Changed in 1.37 Killed some string evals, rewrote most prose JESSE 2008-06-08
149 # Changed in 1.38 Actually enforce the CoreList check,
150 # Record the module the user enters if they do so
151 # Refactor prompts to use common code JESSE 2008-06-08
152 # Changed in 1.39 Trap mail sending failures (simple ones) so JESSE 2008-06-08
153 # users might be able to recover their bug reports
154 # Refactor mail sending routines
155 # Unify message building code
156 # Unify message header building
157 # Fix "module" prompting to not squish "category" prompting
158 # use warnings; (except 'once' warnings)
159 # Unified report fingerprint/change detection code
160 # Removed some labeled 'gotos'
162 # make sure failure (transmission-wise) of Mail::Send is accounted for.
163 # (This may work now. Unsure of the original author's issue -JESSE 2008-06-08)
166 my( $file, $usefile, $cc, $address, $bugaddress, $testaddress, $thanksaddress,
167 $filename, $messageid, $domain, $subject, $from, $verbose, $ed, $outfile,
168 $fh, $me, $body, $andcc, %REP, $ok, $thanks, $progname,
169 $Is_MacOS, $Is_MSWin32, $Is_Linux, $Is_VMS, $Is_OpenBSD,
170 $report_about_module, $category, $severity,
174 my $perl_version = $^V ? sprintf("%vd", $^V) : $];
176 my $config_tag2 = "$perl_version - $Config{cf_time}";
180 if ($::opt_h) { Help(); exit; }
181 if ($::opt_d) { Dump(*STDOUT); exit; }
182 if (!-t STDIN && !($ok and not $::opt_n)) {
184 Please use $progname interactively. If you want to
185 include a file, you can use the -f switch.
191 Edit() unless $usefile || ($ok and not $::opt_n);
194 save_message_to_disk($outfile);
198 print "\nThank you for taking the time to send a thank-you message!\n\n";
200 print "\nThank you for taking the time to file a bug report!\n\n";
206 sub ask_for_alternatives { # (category|severity)
212 # Inevitably some of these will end up in RT whatever we do:
213 'thanks' => 'thanks',
214 'opts' => [qw(core docs install library utilities)], # patch, notabug
220 'opts' => [qw(critical high medium low wishlist none)], # zero
223 die "Invalid alternative ($name) requested\n" unless grep(/^$name$/, keys %alts);
225 my $what = $ok || $thanks;
227 $alt = $alts{$name}{$what};
229 my @alts = @{$alts{$name}{'opts'}};
232 Please pick a $name from the following list:
239 die "Invalid $name: aborting.\n";
241 $alt = _prompt('', "\u$name", $alts{$name}{'default'});
242 $alt ||= $alts{$name}{'default'};
243 } while !((($alt) = grep(/^$alt/i, @alts)));
249 # -------- Setup --------
251 $Is_MSWin32 = $^O eq 'MSWin32';
252 $Is_VMS = $^O eq 'VMS';
253 $Is_Linux = lc($^O) eq 'linux';
254 $Is_OpenBSD = lc($^O) eq 'openbsd';
255 $Is_MacOS = $^O eq 'MacOS';
257 @ARGV = split m/\s+/,
258 MacPerl::Ask('Provide command line args here (-h for help):')
259 if $Is_MacOS && $MacPerl::Version =~ /App/;
261 if (!getopts("Adhva:s:b:f:F:r:e:SCc:to:n:T")) { Help(); exit; };
263 # This comment is needed to notify metaconfig that we are
264 # using the $perladmin, $cf_by, and $cf_time definitions.
266 # -------- Configuration ---------
269 $bugaddress = 'perlbug@perl.org';
272 $testaddress = 'perlbug-test@perl.org';
275 $thanksaddress = 'perl-thanks@perl.org';
277 if (basename ($0) =~ /^perlthanks/i) {
278 # invoked as perlthanks
280 $::opt_C = 1; # don't send a copy to the local admin
287 $progname = $thanks ? 'perlthanks' : 'perlbug';
289 $address = $::opt_a || ($::opt_t ? $testaddress
290 : $thanks ? $thanksaddress : $bugaddress);
292 # Users address, used in message and in Reply-To header
293 $from = $::opt_r || "";
295 # Include verbose configuration information
296 $verbose = $::opt_v || 0;
298 # Subject of bug-report message
299 $subject = $::opt_s || "";
302 $usefile = ($::opt_f || 0);
304 # File to send as report
305 $file = $::opt_f || "";
308 $outfile = $::opt_F || "";
311 $body = $::opt_b || "";
314 $ed = $::opt_e || $ENV{VISUAL} || $ENV{EDITOR} || $ENV{EDIT}
315 || ($Is_VMS && "edit/tpu")
316 || ($Is_MSWin32 && "notepad")
320 # Not OK - provide build failure template by finessing OK report
322 if (substr($::opt_n, 0, 2) eq 'ok' ) {
323 $::opt_o = substr($::opt_n, 1);
330 # OK - send "OK" report for build on this system
333 if ($::opt_o eq 'k' or $::opt_o eq 'kay') {
334 my $age = time - $patchlevel_date;
335 if ($::opt_o eq 'k' and $age > 60 * 24 * 60 * 60 ) {
336 my $date = localtime $patchlevel_date;
338 "perlbug -ok" and "perlbug -nok" do not report on Perl versions which
339 are more than 60 days old. This Perl version was constructed on
340 $date. If you really want to report this, use
341 "perlbug -okay" or "perlbug -nokay".
345 # force these options
347 $::opt_S = 1; # don't prompt for send
348 $::opt_b = 1; # we have a body
349 $body = "Perl reported to build OK on this system.\n";
351 $::opt_C = 1; # don't send a copy to the local admin
352 $::opt_s = 1; # we have a subject line
353 $subject = ($::opt_n ? 'Not ' : '')
354 . "OK: perl $perl_version ${patch_tags}on"
355 ." $::Config{'archname'} $::Config{'osvers'} $subject";
363 # Possible administrator addresses, in order of confidence
364 # (Note that cf_email is not mentioned to metaconfig, since
365 # we don't really want it. We'll just take it if we have to.)
367 # This has to be after the $ok stuff above because of the way
368 # that $::opt_C is forced.
369 $cc = $::opt_C ? "" : (
370 $::opt_c || $::Config{'perladmin'}
371 || $::Config{'cf_email'} || $::Config{'cf_by'}
375 $domain = Mail::Util::maildomain();
376 } elsif ($Is_MSWin32) {
377 $domain = $ENV{'USERDOMAIN'};
379 require Sys::Hostname;
380 $domain = Sys::Hostname::hostname();
384 $messageid = "<$::Config{'version'}_${$}_".time."\@$domain>";
387 $me = $Is_MSWin32 ? $ENV{'USERNAME'}
388 : $^O eq 'os2' ? $ENV{'USER'} || $ENV{'LOGNAME'}
389 : $Is_MacOS ? $ENV{'USER'}
390 : eval { getpwuid($<) }; # May be missing
392 $from = $::Config{'cf_email'}
393 if !$from && $::Config{'cf_email'} && $::Config{'cf_by'} && $me &&
394 ($me eq $::Config{'cf_by'});
398 # Explain what perlbug is
402 This program provides an easy way to send a thank-you message back to the
403 authors and maintainers of perl.
405 If you wish to submit a bug report, please run it without the -T flag
406 (or run the program perlbug rather than perlthanks)
410 This program provides an easy way to create a message reporting a
411 bug in the core perl distribution (along with tests or patches)
412 to the volunteers who maintain perl at $address. To send a thank-you
413 note to $thanksaddress instead of a bug report, please run 'perlthanks'.
415 Please do not use $0 to send test messages, test whether perl
416 works, or to report bugs in perl modules from CPAN.
418 For help using perl, try posting to the Usenet newsgroup
424 # Prompt for subject of message, if needed
426 if ($subject && TrivialSubject($subject)) {
432 "First of all, please provide a subject for the message.\n";
435 This should be a concise description of your bug or problem
436 which will help the volunteers working to improve perl to categorize
437 and resolve the issue. Be as specific and descriptive as
438 you can. A subject like "perl bug" or "perl problem" will make it
439 much less likely that your issue gets the attention it deserves.
445 $subject = _prompt('','Subject');
448 $subject = 'Thanks for Perl';
453 } while (TrivialSubject($subject));
456 # Prompt for return address, if needed
458 # Try and guess return address
461 $guess = $ENV{'REPLY-TO'} || $ENV{'REPLYTO'} || '';
463 require Mac::InternetConfig;
464 $guess = $Mac::InternetConfig::InternetConfig{
465 Mac::InternetConfig::kICEmail()
470 # move $domain to where we can use it elsewhere
472 if ($Is_VMS && !$::Config{'d_socket'}) {
473 $guess = "$domain\:\:$me";
475 $guess = "$me\@$domain" if $domain;
483 Perl's developers may need your email address to contact you for
484 further information about your issue or to inform you when it is
485 resolved. If the default shown is not your email address, please
491 Please enter your full internet email address so that Perl's
492 developers can contact you with questions about your issue or to
493 inform you that it has been resolved.
502 $from = _prompt('','Your address',$guess);
503 $from = $guess if $from eq '';
507 if ($from eq $cc or $me eq $cc) {
508 # Try not to copy ourselves
512 # Prompt for administrator address, unless an override was given
513 if( !$::opt_C and !$::opt_c ) {
514 my $description = <<EOF;
515 $0 can send a copy of this report to your local perl
516 administrator. If the address below is wrong, please correct it,
517 or enter 'none' or 'yourself' to not send a copy.
519 my $entry = _prompt($description, "Local perl administrator", $cc);
523 $cc = '' if $me eq $cc;
527 $cc = '' if $cc =~ /^(none|yourself|me|myself|ourselves)$/i;
534 # Prompt for editor, if no override is given
536 unless ($::opt_e || $::opt_f || $::opt_b) {
540 chomp (my $common_end = <<"EOF");
541 You will probably want to use a text editor to enter the body of
542 your report. If "$ed" is the editor you want to use, then just press
543 Enter, otherwise type in the name of the editor you would like to
546 If you have already composed the body of your report, you may enter
547 "file", and $0 will prompt you to enter the name of the file
548 containing your report.
552 $description = <<"EOF";
553 It's now time to compose your thank-you message.
555 Some information about your local perl configuration will automatically
556 be included at the end of your message, because we're curious about
557 the different ways that people build and use perl. If you'd rather
558 not share this information, you're welcome to delete it.
563 $description = <<"EOF";
564 It's now time to compose your bug report. Try to make the report
565 concise but descriptive. Please include any detail which you think
566 might be relevant or might help the volunteers working to improve
567 perl. If you are reporting something that does not work as you think
568 it should, please try to include examples of the actual result and of
571 Some information about your local perl configuration will automatically
572 be included at the end of your report. If you are using an unusual
573 version of perl, it would be useful if you could confirm that you
574 can replicate the problem on a standard build of perl as well.
580 my $entry = _prompt($description, "Editor", $ed);
582 if ($entry eq "file") {
584 } elsif ($entry ne "") {
588 if ($::HaveCoreList && !$ok && !$thanks) {
589 my $description = <<EOF;
590 If your bug is about a Perl module rather than a core language
591 feature, please enter its name here. If it's not, just hit Enter
592 to skip this question.
596 while ($entry eq '') {
597 $entry = _prompt($description, 'Module');
598 my $first_release = Module::CoreList->first_release($entry);
599 if ($entry and not $first_release) {
601 $entry is not a "core" Perl module. Please check that you entered
602 its name correctly. If it is correct, quit this program, try searching
603 for $entry on http://rt.cpan.org, and report your issue there.
608 $category ||= 'library';
609 $report_about_module = $entry;
617 # Prompt for category of bug
618 $category ||= ask_for_alternatives('category');
620 # Prompt for severity of bug
621 $severity ||= ask_for_alternatives('severity');
623 # Generate scratch file to edit report in
624 $filename = filename();
626 # Prompt for file to read report from, if needed
627 if ($usefile and !$file) {
629 my $description = <<EOF;
630 What is the name of the file that contains your report?
632 my $entry = _prompt($description, "Filename");
636 It seems you didn't enter a filename. Please choose to use a text
637 editor or enter a filename.
642 unless (-f $entry and -r $entry) {
644 '$entry' doesn't seem to be a readable file. You may have mistyped
645 its name or may not have permission to read it.
647 If you don't want to use a file as the content of your report, just
648 hit Enter and you'll be able to select a text editor instead.
656 open(REP,">$filename") or die "Unable to create report file '$filename': $!\n";
657 my $reptype = !$ok ? ($thanks ? 'thank-you' : 'bug')
658 : $::opt_n ? "build failure" : "success";
661 This is a $reptype report for perl from $from,
662 generated with the help of perlbug $Version running under perl $perl_version.
670 or die "Unable to read report file from '$file': $!\n";
674 close(F) or die "Error closing '$file': $!";
679 -----------------------------------------------------------------
680 [Please enter your thank-you message here]
684 [You're welcome to delete anything below this line]
685 -----------------------------------------------------------------
690 -----------------------------------------------------------------
691 [Please describe your issue here]
695 [Please do not change anything below this line]
696 -----------------------------------------------------------------
701 close(REP) or die "Error closing report file: $!";
703 # Set up an initial report fingerprint so we can compare it later
704 _fingerprint_lines_in_report();
718 if ($report_about_module ) {
720 module=$report_about_module
731 print OUT "This perlbug was built using Perl $config_tag1\n",
732 "It is being executed now by Perl $config_tag2.\n\n"
733 if $config_tag2 ne $config_tag1;
736 Site configuration information for perl $perl_version:
739 if ($::Config{cf_by} and $::Config{cf_time}) {
740 print OUT "Configured by $::Config{cf_by} at $::Config{cf_time}.\n\n";
742 print OUT Config::myconfig;
745 print OUT join "\n ", "Locally applied patches:", @patches;
752 \@INC for perl $perl_version:
761 Environment for perl $perl_version:
764 qw(PATH LD_LIBRARY_PATH LANG PERL_BADLANG SHELL HOME LOGDIR LANGUAGE);
765 push @env, $Config{ldlibpthname} if $Config{ldlibpthname} ne '';
766 push @env, grep /^(?:PERL|LC_|LANG|CYGWIN)/, keys %ENV;
769 for my $env (sort keys %env) {
771 exists $ENV{$env} ? "=$ENV{$env}" : ' (unset)',
775 print OUT "\nComplete configuration data for perl $perl_version:\n\n";
777 foreach (sort keys %::Config) {
778 $value = $::Config{$_};
780 print OUT "$_='$value'\n";
787 if ($usefile || $body) {
788 my $description = "Please make sure that the name of the editor you want to use is correct.";
789 my $entry = _prompt($description, 'Editor', $ed);
790 $ed = $entry unless $entry eq '';
799 my $report_written = 0;
801 while ( !$report_written ) {
803 require ExtUtils::MakeMaker;
804 ExtUtils::MM_MacOS::launch_file($filename);
805 _prompt('', "Press Enter when done." );
806 } else { # we're not on oldschool mac os
807 my $exit_status = system("$editor $filename");
810 The editor you chose ('$editor') could not be run!
812 If you mistyped its name, please enter it now, otherwise just press Enter.
814 my $entry = _prompt( $desc, 'Editor', $editor );
815 if ( $entry ne "" ) {
820 You may want to save your report to a file, so you can edit and
827 return if ( $ok and not $::opt_n ) || $body;
829 # Check that we have a report that has some, eh, report in it.
831 unless ( _fingerprint_lines_in_report() ) {
832 my $description = <<EOF;
833 It looks like you didn't enter a report. You may [r]etry your edit
834 or [c]ancel this report.
836 my $action = _prompt( $description, "Action (Retry/Cancel) " );
837 if ( $action =~ /^[re]/i ) { # <R>etry <E>dit
839 } elsif ( $action =~ /^[cq]/i ) { # <C>ancel, <Q>uit
840 Cancel(); # cancel exits
843 # Ok. the user did what they needed to;
851 1 while unlink($filename); # remove all versions under VMS
852 print "\nQuitting without sending your message.\n";
857 # Report is done, prompt for further action
863 You have finished composing your message. At this point, you have
864 a few options. You can:
866 * [Se]end the message to $address$andcc,
867 * [D]isplay the message on the screen,
868 * [R]e-edit the message
869 * Display or change the message's [su]bject
870 * Save the message to a [f]ile to mail at another time
871 * [Q]uit without sending a message
876 my $action = _prompt('', "Action (Send/Display/Edit/Subject/Save to File)");;
878 if ($action =~ /^(f|sa)/i) { # <F>ile/<Sa>ve
879 if ( SaveMessage() ) { exit }
880 } elsif ($action =~ /^(d|l|sh)/i ) { # <D>isplay, <L>ist, <Sh>ow
881 # Display the message
882 open(REP, "<$filename") or die "Couldn't open file '$filename': $!\n";
883 while (<REP>) { print $_ }
884 close(REP) or die "Error closing report file '$filename': $!";
885 } elsif ($action =~ /^su/i) { # <Su>bject
886 my $reply = _prompt( "Subject: $subject", "If the above subject is fine, press Enter. Otherwise, type a replacement now\nSubject");
888 unless (TrivialSubject($reply)) {
890 print "Subject: $subject\n";
893 } elsif ($action =~ /^se/i) { # <S>end
895 my $reply = _prompt( "Are you certain you want to send this message?", 'Please type "yes" if you are','no');
896 if ($reply =~ /^yes$/) {
900 You didn't type "yes", so your message has not yet been sent.
903 } elsif ($action =~ /^[er]/i) { # <E>dit, <R>e-edit
906 } elsif ($action =~ /^[qc]/i) { # <C>ancel, <Q>uit
908 } elsif ($action =~ /^s/i) {
910 The command you entered was ambiguous. Please type "send", "save" or "subject".
920 /^(y(es)?|no?|help|perl( (bug|problem))?|bug|problem)$/i ||
921 length($subject) < 4 ||
923 print "\nThe subject you entered wasn't very descriptive. Please try again.\n\n";
931 my $file_save = $outfile || "$progname.rep";
932 my $file = _prompt( '', "Name of file to save message in", $file_save );
933 save_message_to_disk($file) || return undef;
936 A copy of your message has been saved in '$file' for you to
937 send to '$address' with your normal mail client.
943 # Message has been accepted for transmission -- Send the message
945 # on linux certain "mail" implementations won't accept the subject
946 # as "~s subject" and thus the Subject header will be corrupted
947 # so don't use Mail::Send to be safe
949 if ( $::HaveSend && !$Is_Linux && !$Is_OpenBSD ) {
950 _send_message_mailsend();
954 _send_message_sendmail();
958 if ( my $error = $@ ) {
960 $0 has detected an error while trying to send your message: $error.
962 Your message may not have been sent. You will now have a chance to save a copy to disk.
968 1 while unlink($filename); # remove all versions under VMS
974 This program is designed to help you generate and send bug reports
975 (and thank-you notes) about perl5 and the modules which ship with it.
977 In most cases, you can just run "$0" interactively from a command
978 line without any special arguments and follow the prompts.
982 $0 [-v] [-a address] [-s subject] [-b body | -f inpufile ] [ -F outputfile ]
983 [-r returnaddress] [-e editor] [-c adminaddress | -C] [-S] [-t] [-h]
984 $0 [-v] [-r returnaddress] [-A] [-ok | -okay | -nok | -nokay]
989 -v Include Verbose configuration data in the report
990 -f File containing the body of the report. Use this to
991 quickly send a prepared message.
992 -F File to output the resulting mail message to, instead of mailing.
993 -S Send without asking for confirmation.
994 -a Address to send the report to. Defaults to '$address'.
995 -c Address to send copy of report to. Defaults to '$cc'.
996 -C Don't send copy to administrator.
997 -s Subject to include with the message. You will be prompted
998 if you don't supply one on the command line.
999 -b Body of the report. If not included on the command line, or
1000 in a file with -f, you will get a chance to edit the message.
1001 -r Your return address. The program will ask you to confirm
1002 this if you don't give it here.
1004 -t Test mode. The target address defaults to '$testaddress'.
1005 -T Thank-you mode. The target address defaults to '$thanksaddress'.
1006 -d Data mode. This prints out your configuration data, without mailing
1007 anything. You can use this with -v to get more complete data.
1008 -A Don't send a bug received acknowledgement to the return address.
1009 -ok Report successful build on this system to perl porters
1010 (use alone or with -v). Only use -ok if *everything* was ok:
1011 if there were *any* problems at all, use -nok.
1012 -okay As -ok but allow report from old builds.
1013 -nok Report unsuccessful build on this system to perl porters
1014 (use alone or with -v). You must describe what went wrong
1015 in the body of the report which you will be asked to edit.
1016 -nokay As -nok but allow report from old builds.
1017 -h Print this help message.
1024 # Good. Use a secure temp file
1025 my ($fh, $filename) = File::Temp::tempfile(UNLINK => 1);
1029 # Bah. Fall back to doing things less securely.
1030 my $dir = File::Spec->tmpdir();
1031 $filename = "bugrep0$$";
1032 $filename++ while -e File::Spec->catfile($dir, $filename);
1033 $filename = File::Spec->catfile($dir, $filename);
1038 my @paragraphs = split /\n{2,}/, "@_";
1039 for (@paragraphs) { # implicit local $_
1047 my ($explanation, $prompt, $default) = (@_);
1050 paraprint $explanation;
1052 print $prompt. ($default ? " [$default]" :''). ": ";
1053 my $result = scalar(<>);
1055 $result =~ s/^\s*(.*?)\s*$/$1/s;
1056 if ($default && $result eq '') {
1067 for my $header (keys %attr) {
1068 $head .= "$header: ".$attr{$header}."\n";
1073 sub _message_headers {
1074 my %headers = ( To => $address, Subject => $subject );
1075 $headers{'Cc'} = $cc if ($cc);
1076 $headers{'Message-Id'} = $messageid if ($messageid);
1077 $headers{'Reply-To'} = $from if ($from);
1081 sub build_complete_message {
1082 my $content = _build_header(%{_message_headers()}) . "\n\n";
1083 open( REP, "<$filename" ) or die "Couldn't open file '$filename': $!\n";
1084 while (<REP>) { $content .= $_; }
1085 close(REP) or die "Error closing report file '$filename': $!";
1089 sub save_message_to_disk {
1092 open OUTFILE, ">$file" or do { warn "Couldn't open '$file': $!\n"; return undef};
1093 print OUTFILE build_complete_message();
1094 close(OUTFILE) or do { warn "Error closing $file: $!"; return undef };
1095 print "\nMessage saved.\n";
1099 sub _send_message_vms {
1100 if ( ( $address =~ /@/ and $address !~ /^\w+%"/ )
1101 or ( $cc =~ /@/ and $cc !~ /^\w+%"/ ) ) {
1103 foreach ( qw[ IN MX SMTP UCX PONY WINS ], '' ) {
1104 $prefix = "$_%", last if $ENV{"MAIL\$PROTOCOL_$_"};
1106 $address = qq[${prefix}"$address"] unless $address =~ /^\w+%"/;
1107 $cc = qq[${prefix}"$cc"] unless !$cc || $cc =~ /^\w+%"/;
1109 $subject =~ s/"/""/g;
1110 $address =~ s/"/""/g;
1112 my $sts = system(qq[mail/Subject="$subject" $filename. "$address","$cc"]);
1114 die "Can't spawn off mail (leaving bug report in $filename): $sts";
1118 sub _send_message_mailsend {
1119 my $msg = Mail::Send->new();
1120 my %headers = %{_message_headers()};
1121 for my $key ( keys %headers) {
1122 $msg->add($key => $headers{$key});
1126 open(REP, "<$filename") or die "Couldn't open '$filename': $!\n";
1127 while (<REP>) { print $fh $_ }
1128 close(REP) or die "Error closing $filename: $!";
1131 print "\nMessage sent.\n";
1134 sub _probe_for_sendmail {
1136 for (qw(/usr/lib/sendmail /usr/sbin/sendmail /usr/ucblib/sendmail)) {
1137 $sendmail = $_, last if -e $_;
1139 if ( $^O eq 'os2' and $sendmail eq "" ) {
1140 my $path = $ENV{PATH};
1142 my @path = split /$Config{'path_sep'}/, $path;
1144 $sendmail = "$_/sendmail", last if -e "$_/sendmail";
1145 $sendmail = "$_/sendmail.exe", last if -e "$_/sendmail.exe";
1151 sub _send_message_sendmail {
1152 my $sendmail = _probe_for_sendmail();
1153 unless ($sendmail) {
1154 paraprint(<<"EOF"), die "\n";
1155 It appears that there is no program which looks like "sendmail" on
1156 your system and that the Mail::Send library from CPAN isn't available.
1157 Because of this, there's no easy way to automatically send your
1160 A copy of your message has been saved in '$filename' for you to
1161 send to '$address' with your normal mail client.
1165 open( SENDMAIL, "|$sendmail -t -oi" )
1166 || die "'|$sendmail -t -oi' failed: $!";
1167 print SENDMAIL build_complete_message();
1168 if ( close(SENDMAIL) ) {
1169 print "\nMessage sent\n";
1171 warn "\nSendmail returned status '", $? >> 8, "'\n";
1177 # a strange way to check whether any significant editing
1178 # has been done: check whether any new non-empty lines
1181 sub _fingerprint_lines_in_report {
1183 # read in the report template once so that
1184 # we can track whether the user does any editing.
1185 # yes, *all* whitespace is ignored.
1187 open(REP, "<$filename") or die "Unable to open report file '$filename': $!\n";
1188 while (my $line = <REP>) {
1190 $new_lines++ if (!$REP{$line});
1193 close(REP) or die "Error closing report file '$filename': $!";
1194 # returns the number of lines with content that wasn't there when last we looked
1201 ^<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< ~~
1209 perlbug - how to submit bug reports on Perl
1215 B<perlbug> S<[ B<-v> ]> S<[ B<-a> I<address> ]> S<[ B<-s> I<subject> ]>
1216 S<[ B<-b> I<body> | B<-f> I<inputfile> ]> S<[ B<-F> I<outputfile> ]>
1217 S<[ B<-r> I<returnaddress> ]>
1218 S<[ B<-e> I<editor> ]> S<[ B<-c> I<adminaddress> | B<-C> ]>
1219 S<[ B<-S> ]> S<[ B<-t> ]> S<[ B<-d> ]> S<[ B<-A> ]> S<[ B<-h> ]>
1221 B<perlbug> S<[ B<-v> ]> S<[ B<-r> I<returnaddress> ]>
1222 S<[ B<-A> ]> S<[ B<-ok> | B<-okay> | B<-nok> | B<-nokay> ]>
1227 This program is designed to help you generate and send bug reports
1228 (and thank-you notes) about perl5 and the modules which ship with it.
1230 In most cases, you can just run it interactively from a command
1231 line without any special arguments and follow the prompts.
1233 If you have found a bug with a non-standard port (one that was not
1234 part of the I<standard distribution>), a binary distribution, or a
1235 non-core module (such as Tk, DBI, etc), then please see the
1236 documentation that came with that distribution to determine the
1237 correct place to report bugs.
1239 If you are unable to send your report using B<perlbug> (most likely
1240 because your system doesn't have a way to send mail that perlbug
1241 recognizes), you may be able to use this tool to compose your report
1242 and save it to a file which you can then send to B<perlbug@perl.org>
1243 using your regular mail client.
1245 In extreme cases, B<perlbug> may not work well enough on your system
1246 to guide you through composing a bug report. In those cases, you
1247 may be able to use B<perlbug -d> to get system configuration
1248 information to include in a manually composed bug report to
1249 B<perlbug@perl.org>.
1252 When reporting a bug, please run through this checklist:
1256 =item What version of Perl you are running?
1258 Type C<perl -v> at the command line to find out.
1260 =item Are you running the latest released version of perl?
1262 Look at http://www.perl.org/ to find out. If you are not using the
1263 latest released version, please try to replicate your bug on the
1264 latest stable release.
1266 Note that reports about bugs in old versions of Perl, especially
1267 those which indicate you haven't also tested the current stable
1268 release of Perl, are likely to receive less attention from the
1269 volunteers who build and maintain Perl than reports about bugs in
1270 the current release.
1272 This tool isn't apropriate for reporting bugs in any version
1275 =item Are you sure what you have is a bug?
1277 A significant number of the bug reports we get turn out to be
1278 documented features in Perl. Make sure the issue you've run into
1279 isn't intentional by glancing through the documentation that comes
1280 with the Perl distribution.
1282 Given the sheer volume of Perl documentation, this isn't a trivial
1283 undertaking, but if you can point to documentation that suggests
1284 the behaviour you're seeing is I<wrong>, your issue is likely to
1285 receive more attention. You may want to start with B<perldoc>
1286 L<perltrap> for pointers to common traps that new (and experienced)
1287 Perl programmers run into.
1289 If you're unsure of the meaning of an error message you've run
1290 across, B<perldoc> L<perldiag> for an explanation. If the message
1291 isn't in perldiag, it probably isn't generated by Perl. You may
1292 have luck consulting your operating system documentation instead.
1294 If you are on a non-UNIX platform B<perldoc> L<perlport>, as some
1295 features may be unimplemented or work differently.
1297 You may be able to figure out what's going wrong using the Perl
1298 debugger. For information about how to use the debugger B<perldoc>
1301 =item Do you have a proper test case?
1303 The easier it is to reproduce your bug, the more likely it will be
1304 fixed -- if nobody can duplicate your problem, it probably won't be
1307 A good test case has most of these attributes: short, simple code;
1308 few dependencies on external commands, modules, or libraries; no
1309 platform-dependent code (unless it's a platform-specific bug);
1310 clear, simple documentation.
1312 A good test case is almost always a good candidate to be included in
1313 Perl's test suite. If you have the time, consider writing your test case so
1314 that it can be easily included into the standard test suite.
1316 =item Have you included all relevant information?
1318 Be sure to include the B<exact> error messages, if any.
1319 "Perl gave an error" is not an exact error message.
1321 If you get a core dump (or equivalent), you may use a debugger
1322 (B<dbx>, B<gdb>, etc) to produce a stack trace to include in the bug
1325 NOTE: unless your Perl has been compiled with debug info
1326 (often B<-g>), the stack trace is likely to be somewhat hard to use
1327 because it will most probably contain only the function names and not
1328 their arguments. If possible, recompile your Perl with debug info and
1329 reproduce the crash and the stack trace.
1331 =item Can you describe the bug in plain English?
1333 The easier it is to understand a reproducible bug, the more likely
1334 it will be fixed. Any insight you can provide into the problem
1335 will help a great deal. In other words, try to analyze the problem
1336 (to the extent you can) and report your discoveries.
1338 =item Can you fix the bug yourself?
1340 A bug report which I<includes a patch to fix it> will almost
1341 definitely be fixed. When sending a patch, please use the C<diff>
1342 program with the C<-u> option to generate "unified" diff files.
1343 Bug reports with patches are likely to receive significantly more
1344 attention and interest than those without patches.
1346 Your patch may be returned with requests for changes, or requests for more
1347 detailed explanations about your fix.
1349 Here are a few hints for creating high-quality patches:
1351 Make sure the patch is not reversed (the first argument to diff is
1352 typically the original file, the second argument your changed file).
1353 Make sure you test your patch by applying it with the C<patch>
1354 program before you send it on its way. Try to follow the same style
1355 as the code you are trying to patch. Make sure your patch really
1356 does work (C<make test>, if the thing you're patching is covered
1357 by Perl's test suite).
1359 =item Can you use C<perlbug> to submit the report?
1361 B<perlbug> will, amongst other things, ensure your report includes
1362 crucial information about your version of perl. If C<perlbug> is
1363 unable to mail your report after you have typed it in, you may have
1364 to compose the message yourself, add the output produced by C<perlbug
1365 -d> and email it to B<perlbug@perl.org>. If, for some reason, you
1366 cannot run C<perlbug> at all on your system, be sure to include the
1367 entire output produced by running C<perl -V> (note the uppercase V).
1369 Whether you use C<perlbug> or send the email manually, please make
1370 your Subject line informative. "a bug" is not informative. Neither
1371 is "perl crashes" nor is "HELP!!!". These don't help. A compact
1372 description of what's wrong is fine.
1376 Having done your bit, please be prepared to wait, to be told the
1377 bug is in your code, or possibly to get no reply at all. The
1378 volunteers who maintain Perl are busy folks, so if your problem is
1379 an obvious bug in your own code, is difficult to understand or is
1380 a duplicate of an existing report, you may not receive a personal
1383 If it is important to you that your bug be fixed, do monitor the
1384 perl5-porters@perl.org mailing list and the commit logs to development
1385 versions of Perl, and encourage the maintainers with kind words or
1386 offers of frosty beverages. (Please do be kind to the maintainers.
1387 Harassing or flaming them is likely to have the opposite effect of
1390 Feel free to update the ticket about your bug on http://rt.perl.org
1391 if a new version of Perl is released and your bug is still present.
1399 Address to send the report to. Defaults to B<perlbug@perl.org>.
1403 Don't send a bug received acknowledgement to the reply address.
1404 Generally it is only a sensible to use this option if you are a
1405 perl maintainer actively watching perl porters for your message to
1410 Body of the report. If not included on the command line, or
1411 in a file with B<-f>, you will get a chance to edit the message.
1415 Don't send copy to administrator.
1419 Address to send copy of report to. Defaults to the address of the
1420 local perl administrator (recorded when perl was built).
1424 Data mode (the default if you redirect or pipe output). This prints out
1425 your configuration data, without mailing anything. You can use this
1426 with B<-v> to get more complete data.
1434 File containing the body of the report. Use this to quickly send a
1439 File to output the results to instead of sending as an email. Useful
1440 particularly when running perlbug on a machine with no direct internet
1445 Prints a brief summary of the options.
1449 Report successful build on this system to perl porters. Forces B<-S>
1450 and B<-C>. Forces and supplies values for B<-s> and B<-b>. Only
1451 prompts for a return address if it cannot guess it (for use with
1452 B<make>). Honors return address specified with B<-r>. You can use this
1453 with B<-v> to get more complete data. Only makes a report if this
1454 system is less than 60 days old.
1458 As B<-ok> except it will report on older systems.
1462 Report unsuccessful build on this system. Forces B<-C>. Forces and
1463 supplies a value for B<-s>, then requires you to edit the report
1464 and say what went wrong. Alternatively, a prepared report may be
1465 supplied using B<-f>. Only prompts for a return address if it
1466 cannot guess it (for use with B<make>). Honors return address
1467 specified with B<-r>. You can use this with B<-v> to get more
1468 complete data. Only makes a report if this system is less than 60
1473 As B<-nok> except it will report on older systems.
1477 Your return address. The program will ask you to confirm its default
1478 if you don't use this option.
1482 Send without asking for confirmation.
1486 Subject to include with the message. You will be prompted if you don't
1487 supply one on the command line.
1491 Test mode. The target address defaults to B<perlbug-test@perl.org>.
1495 Include verbose configuration data in the report.
1501 Kenneth Albanowski (E<lt>kjahds@kjahds.comE<gt>), subsequently
1502 I<doc>tored by Gurusamy Sarathy (E<lt>gsar@activestate.comE<gt>),
1503 Tom Christiansen (E<lt>tchrist@perl.comE<gt>), Nathan Torkington
1504 (E<lt>gnat@frii.comE<gt>), Charles F. Randall (E<lt>cfr@pobox.comE<gt>),
1505 Mike Guy (E<lt>mjtg@cam.a.ukE<gt>), Dominic Dunlop
1506 (E<lt>domo@computer.orgE<gt>), Hugo van der Sanden (E<lt>hv@crypt.org<gt>),
1507 Jarkko Hietaniemi (E<lt>jhi@iki.fiE<gt>), Chris Nandor
1508 (E<lt>pudge@pobox.comE<gt>), Jon Orwant (E<lt>orwant@media.mit.eduE<gt>,
1509 Richard Foley (E<lt>richard.foley@rfi.netE<gt>), and Jesse Vincent
1510 (E<lt>jesse@bestpractical.com<gt>).
1514 perl(1), perldebug(1), perldiag(1), perlport(1), perltrap(1),
1515 diff(1), patch(1), dbx(1), gdb(1)
1519 None known (guess what must have been used to report them?)
1525 close OUT or die "Can't close $file: $!";
1526 chmod 0755, $file or die "Can't reset permissions for $file: $!\n";
1527 exec("$Config{'eunicefix'} $file") if $Config{'eunicefix'} ne ':';