Add sockatmark() probing.

[p5sagit/p5-mst-13.2.git] / uconfig.h

/*
 * This file was produced by running the config_h.SH script, which
 * gets its values from uconfig.sh, which is generally produced by
 * running Configure.
 *
 * Feel free to modify any of this as the need arises.  Note, however,
 * that running config_h.SH again will wipe out any changes you've made.
 * For a more permanent change edit uconfig.sh and rerun config_h.SH.
 *
 * $Id: Config_h.U,v 3.0.1.5 1997/02/28 14:57:43 ram Exp $
 */

/*
 * Package name      : 
 * Source directory  : 
 * Configuration time: 
 * Configured by     : 
 * Target system     : unknown
 */

#ifndef _config_h_
#define _config_h_

/* LOC_SED:
 *      This symbol holds the complete pathname to the sed program.
 */
#define LOC_SED         ""      /**/

/* HAS_ALARM:
 *      This symbol, if defined, indicates that the alarm routine is
 *      available.
 */
/*#define HAS_ALARM             / **/

/* HASATTRIBUTE:
 *      This symbol indicates the C compiler can check for function attributes,
 *      such as printf formats. This is normally only supported by GNU cc.
 */
/*#define HASATTRIBUTE  / **/
#ifndef HASATTRIBUTE
#define __attribute__(_arg_)
#endif

/* HAS_BCMP:
 *      This symbol is defined if the bcmp() routine is available to
 *      compare blocks of memory.
 */
/*#define HAS_BCMP      / **/

/* HAS_BCOPY:
 *      This symbol is defined if the bcopy() routine is available to
 *      copy blocks of memory.
 */
/*#define HAS_BCOPY     / **/

/* HAS_BZERO:
 *      This symbol is defined if the bzero() routine is available to
 *      set a memory block to 0.
 */
/*#define HAS_BZERO     / **/

/* HAS_CHOWN:
 *      This symbol, if defined, indicates that the chown routine is
 *      available.
 */
/*#define HAS_CHOWN             / **/

/* HAS_CHROOT:
 *      This symbol, if defined, indicates that the chroot routine is
 *      available.
 */
/*#define HAS_CHROOT            / **/

/* HAS_CHSIZE:
 *      This symbol, if defined, indicates that the chsize routine is available
 *      to truncate files.  You might need a -lx to get this routine.
 */
/*#define       HAS_CHSIZE              / **/

/* HASCONST:
 *      This symbol, if defined, indicates that this C compiler knows about
 *      the const type. There is no need to actually test for that symbol
 *      within your programs. The mere use of the "const" keyword will
 *      trigger the necessary tests.
 */
/*#define HASCONST      / **/
#ifndef HASCONST
#define const
#endif

/* HAS_CRYPT:
 *      This symbol, if defined, indicates that the crypt routine is available
 *      to encrypt passwords and the like.
 */
/*#define HAS_CRYPT             / **/

/* HAS_CUSERID:
 *      This symbol, if defined, indicates that the cuserid routine is
 *      available to get character login names.
 */
/*#define HAS_CUSERID           / **/

/* HAS_DBL_DIG:
 *      This symbol, if defined, indicates that this system's <float.h>
 *      or <limits.h> defines the symbol DBL_DIG, which is the number
 *      of significant digits in a double precision number.  If this
 *      symbol is not defined, a guess of 15 is usually pretty good.
 */
/*#define HAS_DBL_DIG   / * */

/* HAS_DIFFTIME:
 *      This symbol, if defined, indicates that the difftime routine is
 *      available.
 */
/*#define HAS_DIFFTIME          / **/

/* HAS_DLERROR:
 *      This symbol, if defined, indicates that the dlerror routine is
 *      available to return a string describing the last error that
 *      occurred from a call to dlopen(), dlclose() or dlsym().
 */
/*#define HAS_DLERROR   / **/

/* SETUID_SCRIPTS_ARE_SECURE_NOW:
 *      This symbol, if defined, indicates that the bug that prevents
 *      setuid scripts from being secure is not present in this kernel.
 */
/* DOSUID:
 *      This symbol, if defined, indicates that the C program should
 *      check the script that it is executing for setuid/setgid bits, and
 *      attempt to emulate setuid/setgid on systems that have disabled
 *      setuid #! scripts because the kernel can't do it securely.
 *      It is up to the package designer to make sure that this emulation
 *      is done securely.  Among other things, it should do an fstat on
 *      the script it just opened to make sure it really is a setuid/setgid
 *      script, it should make sure the arguments passed correspond exactly
 *      to the argument on the #! line, and it should not trust any
 *      subprocesses to which it must pass the filename rather than the
 *      file descriptor of the script to be executed.
 */
/*#define SETUID_SCRIPTS_ARE_SECURE_NOW / **/
/*#define DOSUID                / **/

/* HAS_DUP2:
 *      This symbol, if defined, indicates that the dup2 routine is
 *      available to duplicate file descriptors.
 */
/*#define HAS_DUP2      / **/

/* HAS_FCHMOD:
 *      This symbol, if defined, indicates that the fchmod routine is available
 *      to change mode of opened files.  If unavailable, use chmod().
 */
/*#define HAS_FCHMOD            / **/

/* HAS_FCHOWN:
 *      This symbol, if defined, indicates that the fchown routine is available
 *      to change ownership of opened files.  If unavailable, use chown().
 */
/*#define HAS_FCHOWN            / **/

/* HAS_FCNTL:
 *      This symbol, if defined, indicates to the C program that
 *      the fcntl() function exists.
 */
/*#define HAS_FCNTL             / **/

/* HAS_FGETPOS:
 *      This symbol, if defined, indicates that the fgetpos routine is
 *      available to get the file position indicator, similar to ftell().
 */
/*#define HAS_FGETPOS   / **/

/* HAS_FLOCK:
 *      This symbol, if defined, indicates that the flock routine is
 *      available to do file locking.
 */
/*#define HAS_FLOCK             / **/

/* HAS_FORK:
 *      This symbol, if defined, indicates that the fork routine is
 *      available.
 */
#define HAS_FORK                /**/

/* HAS_FSETPOS:
 *      This symbol, if defined, indicates that the fsetpos routine is
 *      available to set the file position indicator, similar to fseek().
 */
/*#define HAS_FSETPOS   / **/

/* HAS_GETTIMEOFDAY:
 *      This symbol, if defined, indicates that the gettimeofday() system
 *      call is available for a sub-second accuracy clock. Usually, the file
 *      <sys/resource.h> needs to be included (see I_SYS_RESOURCE).
 *      The type "Timeval" should be used to refer to "struct timeval".
 */
/*#define HAS_GETTIMEOFDAY      / **/
#ifdef HAS_GETTIMEOFDAY
#define Timeval struct timeval  /* Structure used by gettimeofday() */
#endif

/* HAS_GETGROUPS:
 *      This symbol, if defined, indicates that the getgroups() routine is
 *      available to get the list of process groups.  If unavailable, multiple
 *      groups are probably not supported.
 */
/*#define HAS_GETGROUPS         / **/

/* HAS_GETLOGIN:
 *      This symbol, if defined, indicates that the getlogin routine is
 *      available to get the login name.
 */
/*#define HAS_GETLOGIN          / **/

/* HAS_GETPGID:
 *      This symbol, if defined, indicates to the C program that 
 *      the getpgid(pid) function is available to get the
 *      process group id.
 */
/*#define HAS_GETPGID           / **/

/* HAS_GETPGRP2:
 *      This symbol, if defined, indicates that the getpgrp2() (as in DG/UX)
 *      routine is available to get the current process group.
 */
/*#define HAS_GETPGRP2          / **/

/* HAS_GETPPID:
 *      This symbol, if defined, indicates that the getppid routine is
 *      available to get the parent process ID.
 */
/*#define HAS_GETPPID           / **/

/* HAS_GETPRIORITY:
 *      This symbol, if defined, indicates that the getpriority routine is
 *      available to get a process's priority.
 */
/*#define HAS_GETPRIORITY               / **/

/* HAS_INET_ATON:
 *      This symbol, if defined, indicates to the C program that the
 *      inet_aton() function is available to parse IP address "dotted-quad"
 *      strings.
 */
/*#define HAS_INET_ATON         / **/

/* HAS_KILLPG:
 *      This symbol, if defined, indicates that the killpg routine is available
 *      to kill process groups.  If unavailable, you probably should use kill
 *      with a negative process number.
 */
/*#define HAS_KILLPG    / **/

/* HAS_LINK:
 *      This symbol, if defined, indicates that the link routine is
 *      available to create hard links.
 */
/*#define HAS_LINK      / **/

/* HAS_LOCALECONV:
 *      This symbol, if defined, indicates that the localeconv routine is
 *      available for numeric and monetary formatting conventions.
 */
/*#define HAS_LOCALECONV        / **/

/* HAS_LOCKF:
 *      This symbol, if defined, indicates that the lockf routine is
 *      available to do file locking.
 */
/*#define HAS_LOCKF             / **/

/* HAS_LSTAT:
 *      This symbol, if defined, indicates that the lstat routine is
 *      available to do file stats on symbolic links.
 */
/*#define HAS_LSTAT             / **/

/* HAS_MBLEN:
 *      This symbol, if defined, indicates that the mblen routine is available
 *      to find the number of bytes in a multibye character.
 */
/*#define HAS_MBLEN             / **/

/* HAS_MBSTOWCS:
 *      This symbol, if defined, indicates that the mbstowcs routine is
 *      available to covert a multibyte string into a wide character string.
 */
/*#define       HAS_MBSTOWCS            / **/

/* HAS_MBTOWC:
 *      This symbol, if defined, indicates that the mbtowc routine is available
 *      to covert a multibyte to a wide character.
 */
/*#define HAS_MBTOWC            / **/

/* HAS_MEMCMP:
 *      This symbol, if defined, indicates that the memcmp routine is available
 *      to compare blocks of memory.
 */
/*#define HAS_MEMCMP    / **/

/* HAS_MEMCPY:
 *      This symbol, if defined, indicates that the memcpy routine is available
 *      to copy blocks of memory.
 */
/*#define HAS_MEMCPY    / **/

/* HAS_MEMMOVE:
 *      This symbol, if defined, indicates that the memmove routine is available
 *      to copy potentially overlapping blocks of memory. This should be used
 *      only when HAS_SAFE_BCOPY is not defined. If neither is there, roll your
 *      own version.
 */
/*#define HAS_MEMMOVE   / **/

/* HAS_MEMSET:
 *      This symbol, if defined, indicates that the memset routine is available
 *      to set blocks of memory.
 */
/*#define HAS_MEMSET    / **/

/* HAS_MKDIR:
 *      This symbol, if defined, indicates that the mkdir routine is available
 *      to create directories.  Otherwise you should fork off a new process to
 *      exec /bin/mkdir.
 */
/*#define HAS_MKDIR             / **/

/* HAS_MKFIFO:
 *      This symbol, if defined, indicates that the mkfifo routine is
 *      available to create FIFOs. Otherwise, mknod should be able to
 *      do it for you. However, if mkfifo is there, mknod might require
 *      super-user privileges which mkfifo will not.
 */
/*#define HAS_MKFIFO            / **/

/* HAS_MKTIME:
 *      This symbol, if defined, indicates that the mktime routine is
 *      available.
 */
/*#define HAS_MKTIME            / **/

/* HAS_MSYNC:
 *      This symbol, if defined, indicates that the msync system call is
 *      available to synchronize a mapped file.
 */
/*#define HAS_MSYNC             / **/

/* HAS_MUNMAP:
 *      This symbol, if defined, indicates that the munmap system call is
 *      available to unmap a region, usually mapped by mmap().
 */
/*#define HAS_MUNMAP            / **/

/* HAS_NICE:
 *      This symbol, if defined, indicates that the nice routine is
 *      available.
 */
/*#define HAS_NICE              / **/

/* HAS_PATHCONF:
 *      This symbol, if defined, indicates that pathconf() is available
 *      to determine file-system related limits and options associated
 *      with a given filename.
 */
/* HAS_FPATHCONF:
 *      This symbol, if defined, indicates that pathconf() is available
 *      to determine file-system related limits and options associated
 *      with a given open file descriptor.
 */
/*#define HAS_PATHCONF          / **/
/*#define HAS_FPATHCONF         / **/

/* HAS_PAUSE:
 *      This symbol, if defined, indicates that the pause routine is
 *      available to suspend a process until a signal is received.
 */
/*#define HAS_PAUSE             / **/

/* HAS_PIPE:
 *      This symbol, if defined, indicates that the pipe routine is
 *      available to create an inter-process channel.
 */
/*#define HAS_PIPE              / **/

/* HAS_POLL:
 *      This symbol, if defined, indicates that the poll routine is
 *      available to poll active file descriptors. You may safely
 *      include <poll.h> when this symbol is defined.
 */
/*#define HAS_POLL              / **/

/* HAS_READDIR:
 *      This symbol, if defined, indicates that the readdir routine is
 *      available to read directory entries. You may have to include
 *      <dirent.h>. See I_DIRENT.
 */
/*#define HAS_READDIR           / **/

/* HAS_SEEKDIR:
 *      This symbol, if defined, indicates that the seekdir routine is
 *      available. You may have to include <dirent.h>. See I_DIRENT.
 */
/*#define HAS_SEEKDIR           / **/

/* HAS_TELLDIR:
 *      This symbol, if defined, indicates that the telldir routine is
 *      available. You may have to include <dirent.h>. See I_DIRENT.
 */
/*#define HAS_TELLDIR           / **/

/* HAS_REWINDDIR:
 *      This symbol, if defined, indicates that the rewinddir routine is
 *      available. You may have to include <dirent.h>. See I_DIRENT.
 */
/*#define HAS_REWINDDIR         / **/

/* HAS_READLINK:
 *      This symbol, if defined, indicates that the readlink routine is
 *      available to read the value of a symbolic link.
 */
/*#define HAS_READLINK          / **/

/* HAS_RENAME:
 *      This symbol, if defined, indicates that the rename routine is available
 *      to rename files.  Otherwise you should do the unlink(), link(), unlink()
 *      trick.
 */
/*#define HAS_RENAME    / **/

/* HAS_RMDIR:
 *      This symbol, if defined, indicates that the rmdir routine is
 *      available to remove directories. Otherwise you should fork off a
 *      new process to exec /bin/rmdir.
 */
/*#define HAS_RMDIR             / **/

/* HAS_SELECT:
 *      This symbol, if defined, indicates that the select routine is
 *      available to select active file descriptors. If the timeout field
 *      is used, <sys/time.h> may need to be included.
 */
/*#define HAS_SELECT    / **/

/* HAS_SETEGID:
 *      This symbol, if defined, indicates that the setegid routine is available
 *      to change the effective gid of the current program.
 */
/*#define HAS_SETEGID           / **/

/* HAS_SETEUID:
 *      This symbol, if defined, indicates that the seteuid routine is available
 *      to change the effective uid of the current program.
 */
/*#define HAS_SETEUID           / **/

/* HAS_SETLINEBUF:
 *      This symbol, if defined, indicates that the setlinebuf routine is
 *      available to change stderr or stdout from block-buffered or unbuffered
 *      to a line-buffered mode.
 */
/*#define HAS_SETLINEBUF                / **/

/* HAS_SETLOCALE:
 *      This symbol, if defined, indicates that the setlocale routine is
 *      available to handle locale-specific ctype implementations.
 */
/*#define HAS_SETLOCALE / **/

/* HAS_SETPGID:
 *      This symbol, if defined, indicates that the setpgid(pid, gpid)
 *      routine is available to set process group ID.
 */
/*#define HAS_SETPGID   / **/

/* HAS_SETPGRP2:
 *      This symbol, if defined, indicates that the setpgrp2() (as in DG/UX)
 *      routine is available to set the current process group.
 */
/*#define HAS_SETPGRP2          / **/

/* HAS_SETPRIORITY:
 *      This symbol, if defined, indicates that the setpriority routine is
 *      available to set a process's priority.
 */
/*#define HAS_SETPRIORITY               / **/

/* HAS_SETREGID:
 *      This symbol, if defined, indicates that the setregid routine is
 *      available to change the real and effective gid of the current
 *      process.
 */
/* HAS_SETRESGID:
 *      This symbol, if defined, indicates that the setresgid routine is
 *      available to change the real, effective and saved gid of the current
 *      process.
 */
/*#define HAS_SETREGID          / **/
/*#define HAS_SETRESGID         / **/

/* HAS_SETREUID:
 *      This symbol, if defined, indicates that the setreuid routine is
 *      available to change the real and effective uid of the current
 *      process.
 */
/* HAS_SETRESUID:
 *      This symbol, if defined, indicates that the setresuid routine is
 *      available to change the real, effective and saved uid of the current
 *      process.
 */
/*#define HAS_SETREUID          / **/
/*#define HAS_SETRESUID         / **/

/* HAS_SETRGID:
 *      This symbol, if defined, indicates that the setrgid routine is available
 *      to change the real gid of the current program.
 */
/*#define HAS_SETRGID           / **/

/* HAS_SETRUID:
 *      This symbol, if defined, indicates that the setruid routine is available
 *      to change the real uid of the current program.
 */
/*#define HAS_SETRUID           / **/

/* HAS_SETSID:
 *      This symbol, if defined, indicates that the setsid routine is
 *      available to set the process group ID.
 */
/*#define HAS_SETSID    / **/

/* Shmat_t:
 *      This symbol holds the return type of the shmat() system call.
 *      Usually set to 'void *' or 'char *'.
 */
/* HAS_SHMAT_PROTOTYPE:
 *      This symbol, if defined, indicates that the sys/shm.h includes
 *      a prototype for shmat().  Otherwise, it is up to the program to
 *      guess one.  Shmat_t shmat _((int, Shmat_t, int)) is a good guess,
 *      but not always right so it should be emitted by the program only
 *      when HAS_SHMAT_PROTOTYPE is not defined to avoid conflicting defs.
 */
#define Shmat_t void *  /**/
/*#define HAS_SHMAT_PROTOTYPE   / **/

/* HAS_STRCHR:
 *      This symbol is defined to indicate that the strchr()/strrchr()
 *      functions are available for string searching. If not, try the
 *      index()/rindex() pair.
 */
/* HAS_INDEX:
 *      This symbol is defined to indicate that the index()/rindex()
 *      functions are available for string searching.
 */
/*#define HAS_STRCHR    / **/
/*#define HAS_INDEX     / **/

/* HAS_STRCOLL:
 *      This symbol, if defined, indicates that the strcoll routine is
 *      available to compare strings using collating information.
 */
/*#define HAS_STRCOLL   / **/

/* USE_STRUCT_COPY:
 *      This symbol, if defined, indicates that this C compiler knows how
 *      to copy structures.  If undefined, you'll need to use a block copy
 *      routine of some sort instead.
 */
/*#define       USE_STRUCT_COPY / **/

/* HAS_STRTOD:
 *      This symbol, if defined, indicates that the strtod routine is
 *      available to provide better numeric string conversion than atof().
 */
/*#define HAS_STRTOD    / **/

/* HAS_STRTOL:
 *      This symbol, if defined, indicates that the strtol routine is available
 *      to provide better numeric string conversion than atoi() and friends.
 */
/*#define HAS_STRTOL    / **/

/* HAS_STRXFRM:
 *      This symbol, if defined, indicates that the strxfrm() routine is
 *      available to transform strings.
 */
/*#define HAS_STRXFRM   / **/

/* HAS_SYMLINK:
 *      This symbol, if defined, indicates that the symlink routine is available
 *      to create symbolic links.
 */
/*#define HAS_SYMLINK   / **/

/* HAS_SYSCALL:
 *      This symbol, if defined, indicates that the syscall routine is
 *      available to call arbitrary system calls. If undefined, that's tough.
 */
/*#define HAS_SYSCALL   / **/

/* HAS_SYSCONF:
 *      This symbol, if defined, indicates that sysconf() is available
 *      to determine system related limits and options.
 */
/*#define HAS_SYSCONF   / **/

/* HAS_SYSTEM:
 *      This symbol, if defined, indicates that the system routine is
 *      available to issue a shell command.
 */
/*#define HAS_SYSTEM    / **/

/* HAS_TCGETPGRP:
 *      This symbol, if defined, indicates that the tcgetpgrp routine is
 *      available to get foreground process group ID.
 */
/*#define HAS_TCGETPGRP         / **/

/* HAS_TCSETPGRP:
 *      This symbol, if defined, indicates that the tcsetpgrp routine is
 *      available to set foreground process group ID.
 */
/*#define HAS_TCSETPGRP         / **/

/* HAS_TRUNCATE:
 *      This symbol, if defined, indicates that the truncate routine is
 *      available to truncate files.
 */
/*#define HAS_TRUNCATE  / **/

/* HAS_TZNAME:
 *      This symbol, if defined, indicates that the tzname[] array is
 *      available to access timezone names.
 */
/*#define HAS_TZNAME            / **/

/* HAS_UMASK:
 *      This symbol, if defined, indicates that the umask routine is
 *      available to set and get the value of the file creation mask.
 */
/*#define HAS_UMASK             / **/

/* HASVOLATILE:
 *      This symbol, if defined, indicates that this C compiler knows about
 *      the volatile declaration.
 */
/*#define       HASVOLATILE     / **/
#ifndef HASVOLATILE
#define volatile
#endif

/* HAS_WAIT4:
 *      This symbol, if defined, indicates that wait4() exists.
 */
/*#define HAS_WAIT4     / **/

/* HAS_WAITPID:
 *      This symbol, if defined, indicates that the waitpid routine is
 *      available to wait for child process.
 */
/*#define HAS_WAITPID   / **/

/* HAS_WCSTOMBS:
 *      This symbol, if defined, indicates that the wcstombs routine is
 *      available to convert wide character strings to multibyte strings.
 */
/*#define HAS_WCSTOMBS  / **/

/* HAS_WCTOMB:
 *      This symbol, if defined, indicates that the wctomb routine is available
 *      to covert a wide character to a multibyte.
 */
/*#define HAS_WCTOMB            / **/

/* I_ARPA_INET:
 *      This symbol, if defined, indicates to the C program that it should
 *      include <arpa/inet.h> to get inet_addr and friends declarations.
 */
/*#define       I_ARPA_INET             / **/

/* I_DBM:
 *      This symbol, if defined, indicates that <dbm.h> exists and should
 *      be included.
 */
/* I_RPCSVC_DBM:
 *      This symbol, if defined, indicates that <rpcsvc/dbm.h> exists and
 *      should be included.
 */
/*#define I_DBM / **/
/*#define I_RPCSVC_DBM  / **/

/* I_DIRENT:
 *      This symbol, if defined, indicates to the C program that it should
 *      include <dirent.h>. Using this symbol also triggers the definition
 *      of the Direntry_t define which ends up being 'struct dirent' or
 *      'struct direct' depending on the availability of <dirent.h>.
 */
/* DIRNAMLEN:
 *      This symbol, if defined, indicates to the C program that the length
 *      of directory entry names is provided by a d_namlen field.  Otherwise
 *      you need to do strlen() on the d_name field.
 */
/* Direntry_t:
 *      This symbol is set to 'struct direct' or 'struct dirent' depending on
 *      whether dirent is available or not. You should use this pseudo type to
 *      portably declare your directory entries.
 */
/*#define I_DIRENT              / **/
/*#define DIRNAMLEN     / **/
#define Direntry_t struct dirent

/* I_DLFCN:
 *      This symbol, if defined, indicates that <dlfcn.h> exists and should
 *      be included.
 */
/*#define I_DLFCN               / **/

/* I_FCNTL:
 *      This manifest constant tells the C program to include <fcntl.h>.
 */
/*#define I_FCNTL       / **/

/* I_FLOAT:
 *      This symbol, if defined, indicates to the C program that it should
 *      include <float.h> to get definition of symbols like DBL_MAX or
 *      DBL_MIN, i.e. machine dependent floating point values.
 */
/*#define I_FLOAT               / **/

/* I_LIMITS:
 *      This symbol, if defined, indicates to the C program that it should
 *      include <limits.h> to get definition of symbols like WORD_BIT or
 *      LONG_MAX, i.e. machine dependant limitations.
 */
/*#define I_LIMITS              / **/

/* I_LOCALE:
 *      This symbol, if defined, indicates to the C program that it should
 *      include <locale.h>.
 */
/*#define       I_LOCALE                / **/

/* I_MATH:
 *      This symbol, if defined, indicates to the C program that it should
 *      include <math.h>.
 */
#define I_MATH          /**/

/* I_MEMORY:
 *      This symbol, if defined, indicates to the C program that it should
 *      include <memory.h>.
 */
/*#define I_MEMORY              / **/

/* I_NDBM:
 *      This symbol, if defined, indicates that <ndbm.h> exists and should
 *      be included.
 */
/*#define I_NDBM        / **/

/* I_NET_ERRNO:
 *      This symbol, if defined, indicates that <net/errno.h> exists and 
 *      should be included.
 */
/*#define I_NET_ERRNO           / **/

/* I_NETINET_IN:
 *      This symbol, if defined, indicates to the C program that it should
 *      include <netinet/in.h>. Otherwise, you may try <sys/in.h>.
 */
/*#define I_NETINET_IN  / **/

/* I_SFIO:
 *      This symbol, if defined, indicates to the C program that it should
 *      include <sfio.h>.
 */
/*#define       I_SFIO          / **/

/* I_STDDEF:
 *      This symbol, if defined, indicates that <stddef.h> exists and should
 *      be included.
 */
/*#define I_STDDEF      / **/

/* I_STDLIB:
 *      This symbol, if defined, indicates that <stdlib.h> exists and should
 *      be included.
 */
/*#define I_STDLIB              / **/

/* I_STRING:
 *      This symbol, if defined, indicates to the C program that it should
 *      include <string.h> (USG systems) instead of <strings.h> (BSD systems).
 */
#define I_STRING                /**/

/* I_SYS_DIR:
 *      This symbol, if defined, indicates to the C program that it should
 *      include <sys/dir.h>.
 */
/*#define I_SYS_DIR             / **/

/* I_SYS_FILE:
 *      This symbol, if defined, indicates to the C program that it should
 *      include <sys/file.h> to get definition of R_OK and friends.
 */
/*#define I_SYS_FILE            / **/

/* I_SYS_IOCTL:
 *      This symbol, if defined, indicates that <sys/ioctl.h> exists and should
 *      be included. Otherwise, include <sgtty.h> or <termio.h>.
 */
/* I_SYS_SOCKIO:
 *      This symbol, if defined, indicates the <sys/sockio.h> should be included
 *      to get socket ioctl options, like SIOCATMARK.
 */
/*#define       I_SYS_IOCTL             / **/
/*#define I_SYS_SOCKIO  / **/

/* I_SYS_NDIR:
 *      This symbol, if defined, indicates to the C program that it should
 *      include <sys/ndir.h>.
 */
/*#define I_SYS_NDIR    / **/

/* I_SYS_PARAM:
 *      This symbol, if defined, indicates to the C program that it should
 *      include <sys/param.h>.
 */
/*#define I_SYS_PARAM           / **/

/* I_SYS_RESOURCE:
 *      This symbol, if defined, indicates to the C program that it should
 *      include <sys/resource.h>.
 */
/*#define I_SYS_RESOURCE                / **/

/* I_SYS_SELECT:
 *      This symbol, if defined, indicates to the C program that it should
 *      include <sys/select.h> in order to get definition of struct timeval.
 */
/*#define I_SYS_SELECT  / **/

/* I_SYS_STAT:
 *      This symbol, if defined, indicates to the C program that it should
 *      include <sys/stat.h>.
 */
#define I_SYS_STAT              /**/

/* I_SYS_TIMES:
 *      This symbol, if defined, indicates to the C program that it should
 *      include <sys/times.h>.
 */
/*#define       I_SYS_TIMES             / **/

/* I_SYS_TYPES:
 *      This symbol, if defined, indicates to the C program that it should
 *      include <sys/types.h>.
 */
/*#define       I_SYS_TYPES             / **/

/* I_SYS_UN:
 *      This symbol, if defined, indicates to the C program that it should
 *      include <sys/un.h> to get UNIX domain socket definitions.
 */
/*#define I_SYS_UN              / **/

/* I_SYS_WAIT:
 *      This symbol, if defined, indicates to the C program that it should
 *      include <sys/wait.h>.
 */
/*#define I_SYS_WAIT    / **/

/* I_TERMIO:
 *      This symbol, if defined, indicates that the program should include
 *      <termio.h> rather than <sgtty.h>.  There are also differences in
 *      the ioctl() calls that depend on the value of this symbol.
 */
/* I_TERMIOS:
 *      This symbol, if defined, indicates that the program should include
 *      the POSIX termios.h rather than sgtty.h or termio.h.
 *      There are also differences in the ioctl() calls that depend on the
 *      value of this symbol.
 */
/* I_SGTTY:
 *      This symbol, if defined, indicates that the program should include
 *      <sgtty.h> rather than <termio.h>.  There are also differences in
 *      the ioctl() calls that depend on the value of this symbol.
 */
/*#define I_TERMIO              / **/
/*#define I_TERMIOS             / **/
/*#define I_SGTTY               / **/

/* I_UNISTD:
 *      This symbol, if defined, indicates to the C program that it should
 *      include <unistd.h>.
 */
/*#define I_UNISTD              / **/

/* I_UTIME:
 *      This symbol, if defined, indicates to the C program that it should
 *      include <utime.h>.
 */
/*#define I_UTIME               / **/

/* I_VALUES:
 *      This symbol, if defined, indicates to the C program that it should
 *      include <values.h> to get definition of symbols like MINFLOAT or
 *      MAXLONG, i.e. machine dependant limitations.  Probably, you
 *      should use <limits.h> instead, if it is available.
 */
/*#define I_VALUES              / **/

/* I_STDARG:
 *      This symbol, if defined, indicates that <stdarg.h> exists and should
 *      be included.
 */
/* I_VARARGS:
 *      This symbol, if defined, indicates to the C program that it should
 *      include <varargs.h>.
 */
#define I_STDARG                /**/
/*#define I_VARARGS     / **/

/* I_VFORK:
 *      This symbol, if defined, indicates to the C program that it should
 *      include vfork.h.
 */
/*#define I_VFORK       / **/

/* CAN_PROTOTYPE:
 *      If defined, this macro indicates that the C compiler can handle
 *      function prototypes.
 */
/* _:
 *      This macro is used to declare function parameters for folks who want
 *      to make declarations with prototypes using a different style than
 *      the above macros.  Use double parentheses.  For example:
 *
 *              int main _((int argc, char *argv[]));
 */
/*#define       CAN_PROTOTYPE   / **/
#ifdef CAN_PROTOTYPE
#define _(args) args
#else
#define _(args) ()
#endif

/* SH_PATH:
 *      This symbol contains the full pathname to the shell used on this
 *      on this system to execute Bourne shell scripts.  Usually, this will be
 *      /bin/sh, though it's possible that some systems will have /bin/ksh,
 *      /bin/pdksh, /bin/ash, /bin/bash, or even something such as
 *      D:/bin/sh.exe.
 */
#define SH_PATH ""  /**/

/* CROSSCOMPILE:
 *      This symbol, if defined, signifies that we our
 *      build process is a cross-compilation.
 */
/*#define CROSSCOMPILE          / **/

/* INTSIZE:
 *      This symbol contains the value of sizeof(int) so that the C
 *      preprocessor can make decisions based on it.
 */
/* LONGSIZE:
 *      This symbol contains the value of sizeof(long) so that the C
 *      preprocessor can make decisions based on it.
 */
/* SHORTSIZE:
 *      This symbol contains the value of sizeof(short) so that the C
 *      preprocessor can make decisions based on it.
 */
#define INTSIZE 1               /**/
#define LONGSIZE 1              /**/
#define SHORTSIZE 1             /**/

/* MULTIARCH:
 *      This symbol, if defined, signifies that the build
 *      process will produce some binary files that are going to be
 *      used in a cross-platform environment.  This is the case for
 *      example with the NeXT "fat" binaries that contain executables
 *      for several CPUs.
 */
/*#define MULTIARCH             / **/

/* HAS_QUAD:
 *      This symbol, if defined, tells that there's a 64-bit integer type,
 *      Quad_t, and its unsigned counterpar, Uquad_t. QUADKIND will be one
 *      of QUAD_IS_INT, QUAD_IS_LONG, QUAD_IS_LONG_LONG, or QUAD_IS_INT64_T.
 */
/*#define HAS_QUAD      / **/
#ifdef HAS_QUAD
#   define Quad_t int64_t       /**/
#   define Uquad_t uint64_t     /**/
#   define QUADKIND 4   /**/
#   define QUAD_IS_INT  1
#   define QUAD_IS_LONG 2
#   define QUAD_IS_LONG_LONG    3
#   define QUAD_IS_INT64_T      4
#endif

/* HAS_ACCESSX:
 *      This symbol, if defined, indicates that the accessx routine is
 *      available to do extended access checks.
 */
/*#define HAS_ACCESSX           / **/

/* HAS_EACCESS:
 *      This symbol, if defined, indicates that the eaccess routine is
 *      available to do extended access checks.
 */
/*#define HAS_EACCESS           / **/

/* I_SYS_ACCESS:
 *     This symbol, if defined, indicates to the C program that it should
 *     include <sys/access.h>.
 */
/*#define   I_SYS_ACCESS                / **/

/* I_SYS_SECURITY:
 *     This symbol, if defined, indicates to the C program that it should
 *     include <sys/security.h>.
 */
/*#define   I_SYS_SECURITY      / **/

/* OSNAME:
 *      This symbol contains the name of the operating system, as determined
 *      by Configure.  You shouldn't rely on it too much; the specific
 *      feature tests from Configure are generally more reliable.
 */
#define OSNAME "unknown"                /**/

/* MEM_ALIGNBYTES:
 *      This symbol contains the number of bytes required to align a
 *      double, or a long double when applicable. Usual values are 2,
 *      4 and 8. The default is eight, for safety.
 */
#if defined(CROSSCOMPILE) || defined(MULTIARCH)
#  define MEM_ALIGNBYTES 8
#else
#define MEM_ALIGNBYTES 4
#endif

/* ARCHLIB:
 *      This variable, if defined, holds the name of the directory in
 *      which the user wants to put architecture-dependent public
 *      library files for .  It is most often a local directory
 *      such as /usr/local/lib.  Programs using this variable must be
 *      prepared to deal with filename expansion.  If ARCHLIB is the
 *      same as PRIVLIB, it is not defined, since presumably the
 *      program already searches PRIVLIB.
 */
/* ARCHLIB_EXP:
 *      This symbol contains the ~name expanded version of ARCHLIB, to be used
 *      in programs that are not prepared to deal with ~ expansion at run-time.
 */
/*#define ARCHLIB "/usr/local/lib/perl5/5.7/unknown"            / **/
/*#define ARCHLIB_EXP "/usr/local/lib/perl5/5.7/unknown"                / **/

/* ARCHNAME:
 *      This symbol holds a string representing the architecture name.
 *      It may be used to construct an architecture-dependant pathname
 *      where library files may be held under a private library, for
 *      instance.
 */
#define ARCHNAME "unknown"              /**/

/* HAS_ATOLF:
 *      This symbol, if defined, indicates that the atolf routine is
 *      available to convert strings into long doubles.
 */
/*#define HAS_ATOLF             / **/

/* HAS_ATOLL:
 *      This symbol, if defined, indicates that the atoll routine is
 *      available to convert strings into long longs.
 */
/*#define HAS_ATOLL             / **/

/* BIN:
 *      This symbol holds the path of the bin directory where the package will
 *      be installed. Program must be prepared to deal with ~name substitution.
 */
/* BIN_EXP:
 *      This symbol is the filename expanded version of the BIN symbol, for
 *      programs that do not want to deal with that at run-time.
 */
#define BIN "/usr/local/bin"    /**/
#define BIN_EXP ""      /**/

/* PERL_BINCOMPAT_5005:
 *      This symbol, if defined, indicates that this version of Perl should be
 *      binary-compatible with Perl 5.005.  This is impossible for builds
 *      that use features like threads and multiplicity it is always 
 *      for those versions.
 */
/*#define PERL_BINCOMPAT_5005                   / **/

/* BYTEORDER:
 *      This symbol holds the hexadecimal constant defined in byteorder,
 *      i.e. 0x1234 or 0x4321, etc...
 *      If the compiler supports cross-compiling or multiple-architecture
 *      binaries (eg. on NeXT systems), use compiler-defined macros to
 *      determine the byte order.
 *      On NeXT 3.2 (and greater), you can build "Fat" Multiple Architecture
 *      Binaries (MAB) on either big endian or little endian machines.
 *      The endian-ness is available at compile-time.  This only matters
 *      for perl, where the config.h can be generated and installed on 
 *      one system, and used by a different architecture to build an
 *      extension.  Older versions of NeXT that might not have
 *      defined either *_ENDIAN__ were all on Motorola 680x0 series,
 *      so the default case (for NeXT) is big endian to catch them. 
 *      This might matter for NeXT 3.0.
 */
#if defined(CROSSCOMPILE) || defined(MULTIARCH)
#  ifdef __LITTLE_ENDIAN__
#    if LONGSIZE == 4
#      define BYTEORDER 0x1234
#    else
#      if LONGSIZE == 8
#        define BYTEORDER 0x12345678
#      endif
#    endif
#  else
#    ifdef __BIG_ENDIAN__
#      if LONGSIZE == 4
#        define BYTEORDER 0x4321
#      else
#        if LONGSIZE == 8
#          define BYTEORDER 0x87654321
#        endif
#      endif
#    endif
#  endif
#  if !defined(BYTEORDER) && (defined(NeXT) || defined(__NeXT__))
#    define BYTEORDER 0x4321
#  endif
#else
#define BYTEORDER 0x12  /* large digits for MSB */
#endif /* NeXT */

/* CAT2:
 *      This macro catenates 2 tokens together.
 */
/* STRINGIFY:
 *      This macro surrounds its token with double quotes.
 */
#if 42 == 1
#define CAT2(a,b)       a/**/b
#define STRINGIFY(a)    "a"
                /* If you can get stringification with catify, tell me how! */
#endif
#if 42 == 42
#define PeRl_CaTiFy(a, b)       a ## b  
#define PeRl_StGiFy(a)  #a
/* the additional level of indirection enables these macros to be
 * used as arguments to other macros.  See K&R 2nd ed., page 231. */
#define CAT2(a,b)       PeRl_CaTiFy(a,b)
#define StGiFy(a)       PeRl_StGiFy(a)
#define STRINGIFY(a)    PeRl_StGiFy(a)
#endif
#if 42 != 1 && 42 != 42
#   include "Bletch: How does this C preprocessor catenate tokens?"
#endif

/* CPPSTDIN:
 *      This symbol contains the first part of the string which will invoke
 *      the C preprocessor on the standard input and produce to standard
 *      output.  Typical value of "cc -E" or "/lib/cpp", but it can also
 *      call a wrapper. See CPPRUN.
 */
/* CPPMINUS:
 *      This symbol contains the second part of the string which will invoke
 *      the C preprocessor on the standard input and produce to standard
 *      output.  This symbol will have the value "-" if CPPSTDIN needs a minus
 *      to specify standard input, otherwise the value is "".
 */
/* CPPRUN:
 *      This symbol contains the string which will invoke a C preprocessor on
 *      the standard input and produce to standard output. It needs to end
 *      with CPPLAST, after all other preprocessor flags have been specified.
 *      The main difference with CPPSTDIN is that this program will never be a
 *      pointer to a shell wrapper, i.e. it will be empty if no preprocessor is
 *      available directly to the user. Note that it may well be different from
 *      the preprocessor used to compile the C program.
 */
/* CPPLAST:
 *      This symbol is intended to be used along with CPPRUN in the same manner
 *      symbol CPPMINUS is used with CPPSTDIN. It contains either "-" or "".
 */
#define CPPSTDIN ""
#define CPPMINUS ""
#define CPPRUN ""
#define CPPLAST ""

/* HAS__FWALK:
 *      This symbol, if defined, indicates that the _fwalk system call is
 *      available to apply a function to all the file handles.
 */
/*#define HAS__FWALK            / **/

/* HAS_ACCESS:
 *      This manifest constant lets the C program know that the access()
 *      system call is available to check for accessibility using real UID/GID.
 *      (always present on UNIX.)
 */
/*#define HAS_ACCESS            / **/

/* CASTI32:
 *      This symbol is defined if the C compiler can cast negative
 *      or large floating point numbers to 32-bit ints.
 */
/*#define       CASTI32         / **/

/* CASTNEGFLOAT:
 *      This symbol is defined if the C compiler can cast negative
 *      numbers to unsigned longs, ints and shorts.
 */
/* CASTFLAGS:
 *      This symbol contains flags that say what difficulties the compiler
 *      has casting odd floating values to unsigned long:
 *              0 = ok
 *              1 = couldn't cast < 0
 *              2 = couldn't cast >= 0x80000000
 *              4 = couldn't cast in argument expression list
 */
/*#define       CASTNEGFLOAT            / **/
#define CASTFLAGS 0             /**/

/* VOID_CLOSEDIR:
 *      This symbol, if defined, indicates that the closedir() routine
 *      does not return a value.
 */
/*#define VOID_CLOSEDIR         / **/

/* HAS_CSH:
 *      This symbol, if defined, indicates that the C-shell exists.
 */
/* CSH:
 *      This symbol, if defined, contains the full pathname of csh.
 */
/*#define HAS_CSH               / **/
#ifdef HAS_CSH
#define CSH ""  /**/
#endif

/* DLSYM_NEEDS_UNDERSCORE:
 *      This symbol, if defined, indicates that we need to prepend an
 *      underscore to the symbol name before calling dlsym().  This only
 *      makes sense if you *have* dlsym, which we will presume is the
 *      case if you're using dl_dlopen.xs.
 */
/*#define       DLSYM_NEEDS_UNDERSCORE  / **/

/* HAS_DRAND48_PROTO:
 *      This symbol, if defined, indicates that the system provides
 *      a prototype for the drand48() function.  Otherwise, it is up
 *      to the program to supply one.  A good guess is
 *              extern double drand48 _((void));
 */
/*#define       HAS_DRAND48_PROTO       / **/

/* HAS_ENDGRENT:
 *      This symbol, if defined, indicates that the getgrent routine is
 *      available for finalizing sequential access of the group database.
 */
/*#define HAS_ENDGRENT          / **/

/* HAS_ENDHOSTENT:
 *      This symbol, if defined, indicates that the endhostent() routine is
 *      available to close whatever was being used for host queries.
 */
/*#define HAS_ENDHOSTENT                / **/

/* HAS_ENDNETENT:
 *      This symbol, if defined, indicates that the endnetent() routine is
 *      available to close whatever was being used for network queries.
 */
/*#define HAS_ENDNETENT         / **/

/* HAS_ENDPROTOENT:
 *      This symbol, if defined, indicates that the endprotoent() routine is
 *      available to close whatever was being used for protocol queries.
 */
/*#define HAS_ENDPROTOENT               / **/

/* HAS_ENDPWENT:
 *      This symbol, if defined, indicates that the getgrent routine is
 *      available for finalizing sequential access of the passwd database.
 */
/*#define HAS_ENDPWENT          / **/

/* HAS_ENDSERVENT:
 *      This symbol, if defined, indicates that the endservent() routine is
 *      available to close whatever was being used for service queries.
 */
/*#define HAS_ENDSERVENT                / **/

/* FCNTL_CAN_LOCK:
 *      This symbol, if defined, indicates that fcntl() can be used
 *      for file locking.  Normally on Unix systems this is defined.
 *      It may be undefined on VMS.
 */
/*#define FCNTL_CAN_LOCK                / **/

/* HAS_FD_SET:
 *      This symbol, when defined, indicates presence of the fd_set typedef
 *      in <sys/types.h>
 */
/*#define HAS_FD_SET    / **/

/* FLEXFILENAMES:
 *      This symbol, if defined, indicates that the system supports filenames
 *      longer than 14 characters.
 */
/*#define       FLEXFILENAMES           / **/

/* HAS_FPOS64_T:
 *      This symbol will be defined if the C compiler supports fpos64_t.
 */
/*#define       HAS_FPOS64_T            / **/

/* HAS_FREXPL:
 *      This symbol, if defined, indicates that the frexpl routine is
 *      available to break a long double floating-point number into
 *      a normalized fraction and an integral power of 2.
 */
/*#define HAS_FREXPL            / **/

/* HAS_STRUCT_FS_DATA:
 *      This symbol, if defined, indicates that the struct fs_data
 *      to do statfs() is supported.
 */
/*#define HAS_STRUCT_FS_DATA    / **/

/* HAS_FSEEKO:
 *      This symbol, if defined, indicates that the fseeko routine is
 *      available to fseek beyond 32 bits (useful for ILP32 hosts).
 */
/*#define HAS_FSEEKO            / **/

/* HAS_FSTATFS:
 *      This symbol, if defined, indicates that the fstatfs routine is
 *      available to stat filesystems by file descriptors.
 */
/*#define HAS_FSTATFS           / **/

/* HAS_FSYNC:
 *      This symbol, if defined, indicates that the fsync routine is
 *      available to write a file's modified data and attributes to
 *      permanent storage.
 */
/*#define HAS_FSYNC             / **/

/* HAS_FTELLO:
 *      This symbol, if defined, indicates that the ftello routine is
 *      available to ftell beyond 32 bits (useful for ILP32 hosts).
 */
/*#define HAS_FTELLO            / **/

/* Gconvert:
 *      This preprocessor macro is defined to convert a floating point
 *      number to a string without a trailing decimal point.  This
 *      emulates the behavior of sprintf("%g"), but is sometimes much more
 *      efficient.  If gconvert() is not available, but gcvt() drops the
 *      trailing decimal point, then gcvt() is used.  If all else fails,
 *      a macro using sprintf("%g") is used. Arguments for the Gconvert
 *      macro are: value, number of digits, whether trailing zeros should
 *      be retained, and the output buffer.
 *      Possible values are:
 *              d_Gconvert='gconvert((x),(n),(t),(b))'
 *              d_Gconvert='gcvt((x),(n),(b))'
 *              d_Gconvert='sprintf((b),"%.*g",(n),(x))'
 *      The last two assume trailing zeros should not be kept.
 */
#define Gconvert(x,n,t,b) sprintf((b),"%.*g",(n),(x))

/* HAS_GETCWD:
 *      This symbol, if defined, indicates that the getcwd routine is
 *      available to get the current working directory.
 */
/*#define HAS_GETCWD            / **/

/* HAS_GETESPWNAM:
 *      This symbol, if defined, indicates that the getespwnam system call is
 *      available to retrieve enchanced (shadow) password entries by name.
 */
/*#define HAS_GETESPWNAM                / **/

/* HAS_GETFSSTAT:
 *      This symbol, if defined, indicates that the getfsstat routine is
 *      available to stat filesystems in bulk.
 */
/*#define HAS_GETFSSTAT         / **/

/* HAS_GETGRENT:
 *      This symbol, if defined, indicates that the getgrent routine is
 *      available for sequential access of the group database.
 */
/*#define HAS_GETGRENT          / **/

/* HAS_GETHOSTBYADDR:
 *      This symbol, if defined, indicates that the gethostbyaddr() routine is
 *      available to look up hosts by their IP addresses.
 */
/*#define HAS_GETHOSTBYADDR             / **/

/* HAS_GETHOSTBYNAME:
 *      This symbol, if defined, indicates that the gethostbyname() routine is
 *      available to look up host names in some data base or other.
 */
/*#define HAS_GETHOSTBYNAME             / **/

/* HAS_GETHOSTENT:
 *      This symbol, if defined, indicates that the gethostent() routine is
 *      available to look up host names in some data base or another.
 */
/*#define HAS_GETHOSTENT                / **/

/* HAS_GETHOSTNAME:
 *      This symbol, if defined, indicates that the C program may use the
 *      gethostname() routine to derive the host name.  See also HAS_UNAME
 *      and PHOSTNAME.
 */
/* HAS_UNAME:
 *      This symbol, if defined, indicates that the C program may use the
 *      uname() routine to derive the host name.  See also HAS_GETHOSTNAME
 *      and PHOSTNAME.
 */
/* PHOSTNAME:
 *      This symbol, if defined, indicates the command to feed to the
 *      popen() routine to derive the host name.  See also HAS_GETHOSTNAME
 *      and HAS_UNAME.  Note that the command uses a fully qualified path,
 *      so that it is safe even if used by a process with super-user
 *      privileges.
 */
/* HAS_PHOSTNAME:
 *      This symbol, if defined, indicates that the C program may use the
 *      contents of PHOSTNAME as a command to feed to the popen() routine
 *      to derive the host name.
 */
/*#define HAS_GETHOSTNAME       / **/
/*#define HAS_UNAME             / **/
/*#define HAS_PHOSTNAME / **/
#ifdef HAS_PHOSTNAME
#define PHOSTNAME ""    /* How to get the host name */
#endif

/* HAS_GETHOST_PROTOS:
 *      This symbol, if defined, indicates that <netdb.h> includes
 *      prototypes for gethostent(), gethostbyname(), and
 *      gethostbyaddr().  Otherwise, it is up to the program to guess
 *      them.  See netdbtype.U for probing for various Netdb_xxx_t types.
 */
/*#define       HAS_GETHOST_PROTOS      / **/

/* HAS_GETMNT:
 *      This symbol, if defined, indicates that the getmnt routine is
 *      available to get filesystem mount info by filename.
 */
/*#define HAS_GETMNT            / **/

/* HAS_GETMNTENT:
 *      This symbol, if defined, indicates that the getmntent routine is
 *      available to iterate through mounted file systems to get their info.
 */
/*#define HAS_GETMNTENT         / **/

/* HAS_GETNETBYADDR:
 *      This symbol, if defined, indicates that the getnetbyaddr() routine is
 *      available to look up networks by their IP addresses.
 */
/*#define HAS_GETNETBYADDR              / **/

/* HAS_GETNETBYNAME:
 *      This symbol, if defined, indicates that the getnetbyname() routine is
 *      available to look up networks by their names.
 */
/*#define HAS_GETNETBYNAME              / **/

/* HAS_GETNETENT:
 *      This symbol, if defined, indicates that the getnetent() routine is
 *      available to look up network names in some data base or another.
 */
/*#define HAS_GETNETENT         / **/

/* HAS_GETNET_PROTOS:
 *      This symbol, if defined, indicates that <netdb.h> includes
 *      prototypes for getnetent(), getnetbyname(), and
 *      getnetbyaddr().  Otherwise, it is up to the program to guess
 *      them.  See netdbtype.U for probing for various Netdb_xxx_t types.
 */
/*#define       HAS_GETNET_PROTOS       / **/

/* HAS_GETPAGESIZE:
 *      This symbol, if defined, indicates that the getpagesize system call
 *      is available to get system page size, which is the granularity of
 *      many memory management calls.
 */
/*#define HAS_GETPAGESIZE               / **/

/* HAS_GETPROTOENT:
 *      This symbol, if defined, indicates that the getprotoent() routine is
 *      available to look up protocols in some data base or another.
 */
/*#define HAS_GETPROTOENT               / **/

/* HAS_GETPGRP:
 *      This symbol, if defined, indicates that the getpgrp routine is
 *      available to get the current process group.
 */
/* USE_BSD_GETPGRP:
 *      This symbol, if defined, indicates that getpgrp needs one
 *      arguments whereas USG one needs none.
 */
/*#define HAS_GETPGRP           / **/
/*#define USE_BSD_GETPGRP       / **/

/* HAS_GETPROTOBYNAME:
 *      This symbol, if defined, indicates that the getprotobyname()
 *      routine is available to look up protocols by their name.
 */
/* HAS_GETPROTOBYNUMBER:
 *      This symbol, if defined, indicates that the getprotobynumber()
 *      routine is available to look up protocols by their number.
 */
/*#define HAS_GETPROTOBYNAME            / **/
/*#define HAS_GETPROTOBYNUMBER          / **/

/* HAS_GETPROTO_PROTOS:
 *      This symbol, if defined, indicates that <netdb.h> includes
 *      prototypes for getprotoent(), getprotobyname(), and
 *      getprotobyaddr().  Otherwise, it is up to the program to guess
 *      them.  See netdbtype.U for probing for various Netdb_xxx_t types.
 */
/*#define       HAS_GETPROTO_PROTOS     / **/

/* HAS_GETPRPWNAM:
 *      This symbol, if defined, indicates that the getprpwnam system call is
 *      available to retrieve protected (shadow) password entries by name.
 */
/*#define HAS_GETPRPWNAM                / **/

/* HAS_GETPWENT:
 *      This symbol, if defined, indicates that the getpwent routine is
 *      available for sequential access of the passwd database.
 *      If this is not available, the older getpw() function may be available.
 */
/*#define HAS_GETPWENT          / **/

/* HAS_GETSERVENT:
 *      This symbol, if defined, indicates that the getservent() routine is
 *      available to look up network services in some data base or another.
 */
/*#define HAS_GETSERVENT                / **/

/* HAS_GETSERV_PROTOS:
 *      This symbol, if defined, indicates that <netdb.h> includes
 *      prototypes for getservent(), getservbyname(), and
 *      getservbyaddr().  Otherwise, it is up to the program to guess
 *      them.  See netdbtype.U for probing for various Netdb_xxx_t types.
 */
/*#define       HAS_GETSERV_PROTOS      / **/

/* HAS_GETSPNAM:
 *      This symbol, if defined, indicates that the getspnam system call is
 *      available to retrieve SysV shadow password entries by name.
 */
/*#define HAS_GETSPNAM          / **/

/* HAS_GETSERVBYNAME:
 *      This symbol, if defined, indicates that the getservbyname()
 *      routine is available to look up services by their name.
 */
/* HAS_GETSERVBYPORT:
 *      This symbol, if defined, indicates that the getservbyport()
 *      routine is available to look up services by their port.
 */
/*#define HAS_GETSERVBYNAME             / **/
/*#define HAS_GETSERVBYPORT             / **/

/* HAS_GNULIBC:
 *      This symbol, if defined, indicates to the C program that 
 *      the GNU C library is being used.
 */
/*#define HAS_GNULIBC   / **/
#if defined(HAS_GNULIBC) && !defined(_GNU_SOURCE)
#   define _GNU_SOURCE
#endif
/* HAS_HASMNTOPT:
 *      This symbol, if defined, indicates that the hasmntopt routine is
 *      available to query the mount options of file systems.
 */
/*#define HAS_HASMNTOPT         / **/

/* HAS_HTONL:
 *      This symbol, if defined, indicates that the htonl() routine (and
 *      friends htons() ntohl() ntohs()) are available to do network
 *      order byte swapping.
 */
/* HAS_HTONS:
 *      This symbol, if defined, indicates that the htons() routine (and
 *      friends htonl() ntohl() ntohs()) are available to do network
 *      order byte swapping.
 */
/* HAS_NTOHL:
 *      This symbol, if defined, indicates that the ntohl() routine (and
 *      friends htonl() htons() ntohs()) are available to do network
 *      order byte swapping.
 */
/* HAS_NTOHS:
 *      This symbol, if defined, indicates that the ntohs() routine (and
 *      friends htonl() htons() ntohl()) are available to do network
 *      order byte swapping.
 */
/*#define HAS_HTONL             / **/
/*#define HAS_HTONS             / **/
/*#define HAS_NTOHL             / **/
/*#define HAS_NTOHS             / **/

/* HAS_ICONV:
 *      This symbol, if defined, indicates that the iconv routine is
 *      available to do character set conversions.
 */
/*#define HAS_ICONV             / **/

/* HAS_INT64_T:
 *     This symbol will defined if the C compiler supports int64_t.
 *     Usually the <inttypes.h> needs to be included, but sometimes
 *      <sys/types.h> is enough.
 */
/*#define     HAS_INT64_T               / **/

/* HAS_ISASCII:
 *      This manifest constant lets the C program know that isascii 
 *      is available.
 */
/*#define HAS_ISASCII           / **/

/* HAS_ISNAN:
 *      This symbol, if defined, indicates that the isnan routine is
 *      available to check whether a double is a NaN.
 */
/*#define HAS_ISNAN             / **/

/* HAS_ISNANL:
 *      This symbol, if defined, indicates that the isnanl routine is
 *      available to check whether a long double is a NaN.
 */
/*#define HAS_ISNANL            / **/

/* HAS_LCHOWN:
 *      This symbol, if defined, indicates that the lchown routine is
 *      available to operate on a symbolic link (instead of following the
 *      link).
 */
/*#define HAS_LCHOWN            / **/

/* HAS_LDBL_DIG:
 *      This symbol, if defined, indicates that this system's <float.h>
 *      or <limits.h> defines the symbol LDBL_DIG, which is the number
 *      of significant digits in a long double precision number. Unlike
 *      for DBL_DIG, there's no good guess for LDBL_DIG if it is undefined.
 */
/*#define HAS_LDBL_DIG  / * */

/* HAS_LONG_DOUBLE:
 *      This symbol will be defined if the C compiler supports long
 *      doubles.
 */
/* LONG_DOUBLESIZE:
 *      This symbol contains the size of a long double, so that the 
 *      C preprocessor can make decisions based on it.  It is only
 *      defined if the system supports long doubles.
 */
/*#define HAS_LONG_DOUBLE               / **/
#ifdef HAS_LONG_DOUBLE
#define LONG_DOUBLESIZE 1               /**/
#endif

/* HAS_LONG_LONG:
 *      This symbol will be defined if the C compiler supports long long.
 */
/* LONGLONGSIZE:
 *      This symbol contains the size of a long long, so that the 
 *      C preprocessor can make decisions based on it.  It is only
 *      defined if the system supports long long.
 */
/*#define HAS_LONG_LONG         / **/
#ifdef HAS_LONG_LONG
#define LONGLONGSIZE 1          /**/
#endif

/* HAS_LSEEK_PROTO:
 *      This symbol, if defined, indicates that the system provides
 *      a prototype for the lseek() function.  Otherwise, it is up
 *      to the program to supply one.  A good guess is
 *              extern off_t lseek(int, off_t, int);
 */
/*#define       HAS_LSEEK_PROTO / **/

/* HAS_MADVISE:
 *      This symbol, if defined, indicates that the madvise system call is
 *      available to map a file into memory.
 */
/*#define HAS_MADVISE           / **/

/* HAS_MEMCHR:
 *      This symbol, if defined, indicates that the memchr routine is available
 *      to locate characters within a C string.
 */
/*#define HAS_MEMCHR    / **/

/* HAS_MKDTEMP:
 *      This symbol, if defined, indicates that the mkdtemp routine is
 *      available to exclusively create a uniquely named temporary directory.
 */
/*#define HAS_MKDTEMP           / **/

/* HAS_MKSTEMP:
 *      This symbol, if defined, indicates that the mkstemp routine is
 *      available to exclusively create and open a uniquely named
 *      temporary file.
 */
/*#define HAS_MKSTEMP           / **/

/* HAS_MKSTEMPS:
 *      This symbol, if defined, indicates that the mkstemps routine is
 *      available to excluslvely create and open a uniquely named
 *      (with a suffix) temporary file.
 */
/*#define HAS_MKSTEMPS          / **/

/* HAS_MMAP:
 *      This symbol, if defined, indicates that the mmap system call is
 *      available to map a file into memory.
 */
/* Mmap_t:
 *      This symbol holds the return type of the mmap() system call
 *      (and simultaneously the type of the first argument).
 *      Usually set to 'void *' or 'cadd_t'.
 */
/*#define HAS_MMAP              / **/
#define Mmap_t  /**/

/* HAS_MODFL:
 *      This symbol, if defined, indicates that the modfl routine is
 *      available to split a long double x into a fractional part f and
 *      an integer part i such that |f| < 1.0 and (f + i) = x.
 */
/*#define HAS_MODFL             / **/

/* HAS_MPROTECT:
 *      This symbol, if defined, indicates that the mprotect system call is
 *      available to modify the access protection of a memory mapped file.
 */
/*#define HAS_MPROTECT          / **/

/* HAS_MSG:
 *      This symbol, if defined, indicates that the entire msg*(2) library is
 *      supported (IPC mechanism based on message queues).
 */
/*#define HAS_MSG               / **/

/* HAS_OFF64_T:
 *      This symbol will be defined if the C compiler supports off64_t.
 */
/*#define       HAS_OFF64_T             / **/

/* HAS_OPEN3:
 *      This manifest constant lets the C program know that the three
 *      argument form of open(2) is available.
 */
/*#define HAS_OPEN3             / **/

/* OLD_PTHREAD_CREATE_JOINABLE:
 *      This symbol, if defined, indicates how to create pthread
 *      in joinable (aka undetached) state.  NOTE: not defined
 *      if pthread.h already has defined PTHREAD_CREATE_JOINABLE
 *      (the new version of the constant).
 *      If defined, known values are PTHREAD_CREATE_UNDETACHED
 *      and __UNDETACHED.
 */
/*#define OLD_PTHREAD_CREATE_JOINABLE  / **/

/* HAS_PTHREAD_YIELD:
 *      This symbol, if defined, indicates that the pthread_yield 
 *      routine is available to yield the execution of the current
 *      thread.  sched_yield is preferable to pthread_yield.
 */
/* SCHED_YIELD:
 *      This symbol defines the way to yield the execution of
 *      the current thread.  Known ways are sched_yield,
 *      pthread_yield, and pthread_yield with NULL.
 */
/* HAS_SCHED_YIELD:
 *      This symbol, if defined, indicates that the sched_yield
 *      routine is available to yield the execution of the current
 *      thread.  sched_yield is preferable to pthread_yield.
 */
/*#define HAS_PTHREAD_YIELD     / **/
#define SCHED_YIELD     sched_yield()   /**/
/*#define HAS_SCHED_YIELD       / **/

/* HAS_SAFE_BCOPY:
 *      This symbol, if defined, indicates that the bcopy routine is available
 *      to copy potentially overlapping memory blocks. Otherwise you should
 *      probably use memmove() or memcpy(). If neither is defined, roll your
 *      own version.
 */
/*#define HAS_SAFE_BCOPY        / **/

/* HAS_SAFE_MEMCPY:
 *      This symbol, if defined, indicates that the memcpy routine is available
 *      to copy potentially overlapping memory blocks. Otherwise you should
 *      probably use memmove() or memcpy(). If neither is defined, roll your
 *      own version.
 */
/*#define HAS_SAFE_MEMCPY       / **/

/* HAS_SANE_MEMCMP:
 *      This symbol, if defined, indicates that the memcmp routine is available
 *      and can be used to compare relative magnitudes of chars with their high
 *      bits set.  If it is not defined, roll your own version.
 */
/*#define HAS_SANE_MEMCMP       / **/

/* HAS_SBRK_PROTO:
 *      This symbol, if defined, indicates that the system provides
 *      a prototype for the sbrk() function.  Otherwise, it is up
 *      to the program to supply one.  Good guesses are
 *              extern void* sbrk _((int));
 *              extern void* sbrk _((size_t));
 */
/*#define       HAS_SBRK_PROTO  / **/

/* HAS_SEM:
 *      This symbol, if defined, indicates that the entire sem*(2) library is
 *      supported.
 */
/*#define HAS_SEM               / **/

/* HAS_SETGRENT:
 *      This symbol, if defined, indicates that the setgrent routine is
 *      available for initializing sequential access of the group database.
 */
/*#define HAS_SETGRENT          / **/

/* HAS_SETGROUPS:
 *      This symbol, if defined, indicates that the setgroups() routine is
 *      available to set the list of process groups.  If unavailable, multiple
 *      groups are probably not supported.
 */
/*#define HAS_SETGROUPS         / **/

/* HAS_SETHOSTENT:
 *      This symbol, if defined, indicates that the sethostent() routine is
 *      available.
 */
/*#define HAS_SETHOSTENT                / **/

/* HAS_SETNETENT:
 *      This symbol, if defined, indicates that the setnetent() routine is
 *      available.
 */
/*#define HAS_SETNETENT         / **/

/* HAS_SETPROTOENT:
 *      This symbol, if defined, indicates that the setprotoent() routine is
 *      available.
 */
/*#define HAS_SETPROTOENT               / **/

/* HAS_SETPGRP:
 *      This symbol, if defined, indicates that the setpgrp routine is
 *      available to set the current process group.
 */
/* USE_BSD_SETPGRP:
 *      This symbol, if defined, indicates that setpgrp needs two
 *      arguments whereas USG one needs none.  See also HAS_SETPGID
 *      for a POSIX interface.
 */
/*#define HAS_SETPGRP           / **/
/*#define USE_BSD_SETPGRP       / **/

/* HAS_SETPROCTITLE:
 *      This symbol, if defined, indicates that the setproctitle routine is
 *      available to set process title.
 */
/*#define HAS_SETPROCTITLE              / **/

/* HAS_SETPWENT:
 *      This symbol, if defined, indicates that the setpwent routine is
 *      available for initializing sequential access of the passwd database.
 */
/*#define HAS_SETPWENT          / **/

/* HAS_SETSERVENT:
 *      This symbol, if defined, indicates that the setservent() routine is
 *      available.
 */
/*#define HAS_SETSERVENT                / **/

/* HAS_SETVBUF:
 *      This symbol, if defined, indicates that the setvbuf routine is
 *      available to change buffering on an open stdio stream.
 *      to a line-buffered mode.
 */
/*#define HAS_SETVBUF           / **/

/* USE_SFIO:
 *      This symbol, if defined, indicates that sfio should
 *      be used.
 */
/*#define       USE_SFIO                / **/

/* HAS_SHM:
 *      This symbol, if defined, indicates that the entire shm*(2) library is
 *      supported.
 */
/*#define HAS_SHM               / **/

/* HAS_SIGACTION:
 *      This symbol, if defined, indicates that Vr4's sigaction() routine
 *      is available.
 */
/*#define HAS_SIGACTION / **/

/* HAS_SIGSETJMP:
 *      This variable indicates to the C program that the sigsetjmp()
 *      routine is available to save the calling process's registers
 *      and stack environment for later use by siglongjmp(), and
 *      to optionally save the process's signal mask.  See
 *      Sigjmp_buf, Sigsetjmp, and Siglongjmp.
 */
/* Sigjmp_buf:
 *      This is the buffer type to be used with Sigsetjmp and Siglongjmp.
 */
/* Sigsetjmp:
 *      This macro is used in the same way as sigsetjmp(), but will invoke
 *      traditional setjmp() if sigsetjmp isn't available.
 *      See HAS_SIGSETJMP.
 */
/* Siglongjmp:
 *      This macro is used in the same way as siglongjmp(), but will invoke
 *      traditional longjmp() if siglongjmp isn't available.
 *      See HAS_SIGSETJMP.
 */
/*#define HAS_SIGSETJMP / **/
#ifdef HAS_SIGSETJMP
#define Sigjmp_buf sigjmp_buf
#define Sigsetjmp(buf,save_mask) sigsetjmp((buf),(save_mask))
#define Siglongjmp(buf,retval) siglongjmp((buf),(retval))
#else
#define Sigjmp_buf jmp_buf
#define Sigsetjmp(buf,save_mask) setjmp((buf))
#define Siglongjmp(buf,retval) longjmp((buf),(retval))
#endif

/* HAS_SOCKET:
 *      This symbol, if defined, indicates that the BSD socket interface is
 *      supported.
 */
/* HAS_SOCKETPAIR:
 *      This symbol, if defined, indicates that the BSD socketpair() call is
 *      supported.
 */
/* HAS_MSG_CTRUNC:
 *      This symbol, if defined, indicates that the MSG_CTRUNC is supported.
 *      Checking just with #ifdef might not be enough because this symbol
 *      has been known to be an enum.
 */
/* HAS_MSG_DONTROUTE:
 *      This symbol, if defined, indicates that the MSG_DONTROUTE is supported.
 *      Checking just with #ifdef might not be enough because this symbol
 *      has been known to be an enum.
 */
/* HAS_MSG_OOB:
 *      This symbol, if defined, indicates that the MSG_OOB is supported.
 *      Checking just with #ifdef might not be enough because this symbol
 *      has been known to be an enum.
 */
/* HAS_MSG_PEEK:
 *      This symbol, if defined, indicates that the MSG_PEEK is supported.
 *      Checking just with #ifdef might not be enough because this symbol
 *      has been known to be an enum.
 */
/* HAS_MSG_PROXY:
 *      This symbol, if defined, indicates that the MSG_PROXY is supported.
 *      Checking just with #ifdef might not be enough because this symbol
 *      has been known to be an enum.
 */
/* HAS_SCM_RIGHTS:
 *      This symbol, if defined, indicates that the SCM_RIGHTS is supported.
 *      Checking just with #ifdef might not be enough because this symbol
 *      has been known to be an enum.
 */
/*#define       HAS_SOCKET              / **/
/*#define       HAS_SOCKETPAIR  / **/
/*#define       HAS_MSG_CTRUNC  / **/
/*#define       HAS_MSG_DONTROUTE       / **/
/*#define       HAS_MSG_OOB     / **/
/*#define       HAS_MSG_PEEK    / **/
/*#define       HAS_MSG_PROXY   / **/
/*#define       HAS_SCM_RIGHTS  / **/

/* HAS_SOCKS5_INIT:
 *      This symbol, if defined, indicates that the socks5_init routine is
 *      available to initialize SOCKS 5.
 */
/*#define HAS_SOCKS5_INIT               / **/

/* HAS_SQRTL:
 *      This symbol, if defined, indicates that the sqrtl routine is
 *      available to do long double square roots.
 */
/*#define HAS_SQRTL             / **/

/* USE_STAT_BLOCKS:
 *      This symbol is defined if this system has a stat structure declaring
 *      st_blksize and st_blocks.
 */
#ifndef USE_STAT_BLOCKS
/*#define USE_STAT_BLOCKS       / **/
#endif

/* HAS_STRUCT_STATFS_F_FLAGS:
 *      This symbol, if defined, indicates that the struct statfs
 *      does have the f_flags member containing the mount flags of
 *      the filesystem containing the file.
 *      This kind of struct statfs is coming from <sys/mount.h> (BSD 4.3),
 *      not from <sys/statfs.h> (SYSV).  Older BSDs (like Ultrix) do not
 *      have statfs() and struct statfs, they have ustat() and getmnt()
 *      with struct ustat and struct fs_data.
 */
/*#define HAS_STRUCT_STATFS_F_FLAGS             / **/

/* HAS_STRUCT_STATFS:
 *      This symbol, if defined, indicates that the struct statfs
 *      to do statfs() is supported.
 */
/*#define HAS_STRUCT_STATFS     / **/

/* HAS_FSTATVFS:
 *      This symbol, if defined, indicates that the fstatvfs routine is
 *      available to stat filesystems by file descriptors.
 */
/*#define HAS_FSTATVFS          / **/

/* USE_STDIO_PTR:
 *      This symbol is defined if the _ptr and _cnt fields (or similar)
 *      of the stdio FILE structure can be used to access the stdio buffer
 *      for a file handle.  If this is defined, then the FILE_ptr(fp)
 *      and FILE_cnt(fp) macros will also be defined and should be used
 *      to access these fields.
 */
/* FILE_ptr:
 *      This macro is used to access the _ptr field (or equivalent) of the
 *      FILE structure pointed to by its argument. This macro will always be
 *      defined if USE_STDIO_PTR is defined.
 */
/* STDIO_PTR_LVALUE:
 *      This symbol is defined if the FILE_ptr macro can be used as an
 *      lvalue.
 */
/* FILE_cnt:
 *      This macro is used to access the _cnt field (or equivalent) of the
 *      FILE structure pointed to by its argument. This macro will always be
 *      defined if USE_STDIO_PTR is defined.
 */
/* STDIO_CNT_LVALUE:
 *      This symbol is defined if the FILE_cnt macro can be used as an
 *      lvalue.
 */
/* STDIO_PTR_LVAL_SETS_CNT:
 *      This symbol is defined if using the FILE_ptr macro as an lvalue
 *      to increase the pointer by n has the side effect of decreasing the
 *      value of File_cnt(fp) by n.
 */
/* STDIO_PTR_LVAL_NOCHANGE_CNT:
 *      This symbol is defined if using the FILE_ptr macro as an lvalue
 *      to increase the pointer by n leaves File_cnt(fp) unchanged.
 */
/*#define USE_STDIO_PTR         / **/
#ifdef USE_STDIO_PTR
#define FILE_ptr(fp)    ((fp)->_IO_read_ptr)
/*#define STDIO_PTR_LVALUE              / **/
#define FILE_cnt(fp)    ((fp)->_IO_read_end - (fp)->_IO_read_ptr)
/*#define STDIO_CNT_LVALUE              / **/
/*#define STDIO_PTR_LVAL_SETS_CNT       / **/
/*#define STDIO_PTR_LVAL_NOCHANGE_CNT   / **/
#endif

/* USE_STDIO_BASE:
 *      This symbol is defined if the _base field (or similar) of the
 *      stdio FILE structure can be used to access the stdio buffer for
 *      a file handle.  If this is defined, then the FILE_base(fp) macro
 *      will also be defined and should be used to access this field.
 *      Also, the FILE_bufsiz(fp) macro will be defined and should be used
 *      to determine the number of bytes in the buffer.  USE_STDIO_BASE
 *      will never be defined unless USE_STDIO_PTR is.
 */
/* FILE_base:
 *      This macro is used to access the _base field (or equivalent) of the
 *      FILE structure pointed to by its argument. This macro will always be
 *      defined if USE_STDIO_BASE is defined.
 */
/* FILE_bufsiz:
 *      This macro is used to determine the number of bytes in the I/O
 *      buffer pointed to by _base field (or equivalent) of the FILE
 *      structure pointed to its argument. This macro will always be defined
 *      if USE_STDIO_BASE is defined.
 */
/*#define USE_STDIO_BASE        / **/
#ifdef USE_STDIO_BASE
#define FILE_base(fp)   ((fp)->_IO_read_base)
#define FILE_bufsiz(fp) ((fp)->_IO_read_end - (fp)->_IO_read_base)
#endif

/* HAS_STRERROR:
 *      This symbol, if defined, indicates that the strerror routine is
 *      available to translate error numbers to strings. See the writeup
 *      of Strerror() in this file before you try to define your own.
 */
/* HAS_SYS_ERRLIST:
 *      This symbol, if defined, indicates that the sys_errlist array is
 *      available to translate error numbers to strings. The extern int
 *      sys_nerr gives the size of that table.
 */
/* Strerror:
 *      This preprocessor symbol is defined as a macro if strerror() is
 *      not available to translate error numbers to strings but sys_errlist[]
 *      array is there.
 */
/*#define HAS_STRERROR          / **/
/*#define HAS_SYS_ERRLIST       / **/
#define Strerror(e) strerror(e)

/* HAS_STRTOLD:
 *      This symbol, if defined, indicates that the strtold routine is
 *      available to convert strings to long doubles.
 */
/*#define HAS_STRTOLD           / **/

/* HAS_STRTOLL:
 *      This symbol, if defined, indicates that the strtoll routine is
 *      available to convert strings to long longs.
 */
/*#define HAS_STRTOLL           / **/

/* HAS_STRTOQ:
 *      This symbol, if defined, indicates that the strtoq routine is
 *      available to convert strings to long longs (quads).
 */
/*#define HAS_STRTOQ            / **/

/* HAS_STRTOUL:
 *      This symbol, if defined, indicates that the strtoul routine is
 *      available to provide conversion of strings to unsigned long.
 */
/*#define HAS_STRTOUL   / **/

/* HAS_STRTOULL:
 *      This symbol, if defined, indicates that the strtoull routine is
 *      available to convert strings to unsigned long longs.
 */
/*#define HAS_STRTOULL          / **/

/* HAS_STRTOUQ:
 *      This symbol, if defined, indicates that the strtouq routine is
 *      available to convert strings to unsigned long longs (quads).
 */
/*#define HAS_STRTOUQ           / **/

/* HAS_TELLDIR_PROTO:
 *      This symbol, if defined, indicates that the system provides
 *      a prototype for the telldir() function.  Otherwise, it is up
 *      to the program to supply one.  A good guess is
 *              extern long telldir _((DIR*));
 */
/*#define       HAS_TELLDIR_PROTO       / **/

/* Time_t:
 *      This symbol holds the type returned by time(). It can be long,
 *      or time_t on BSD sites (in which case <sys/types.h> should be
 *      included).
 */
#define Time_t int              /* Time type */

/* HAS_TIMES:
 *      This symbol, if defined, indicates that the times() routine exists.
 *      Note that this became obsolete on some systems (SUNOS), which now
 * use getrusage(). It may be necessary to include <sys/times.h>.
 */
/*#define HAS_TIMES             / **/

/* HAS_UNION_SEMUN:
 *      This symbol, if defined, indicates that the union semun is
 *      defined by including <sys/sem.h>.  If not, the user code
 *      probably needs to define it as:
 *      union semun {
 *          int val;
 *          struct semid_ds *buf;
 *          unsigned short *array;
 *      }
 */
/* USE_SEMCTL_SEMUN:
 *      This symbol, if defined, indicates that union semun is
 *      used for semctl IPC_STAT.
 */
/* USE_SEMCTL_SEMID_DS:
 *      This symbol, if defined, indicates that struct semid_ds * is
 *      used for semctl IPC_STAT.
 */
/*#define HAS_UNION_SEMUN       / **/
/*#define USE_SEMCTL_SEMUN      / **/
/*#define USE_SEMCTL_SEMID_DS   / **/

/* HAS_USTAT:
 *      This symbol, if defined, indicates that the ustat system call is
 *      available to query file system statistics by dev_t.
 */
/*#define HAS_USTAT             / **/

/* HAS_VFORK:
 *      This symbol, if defined, indicates that vfork() exists.
 */
/*#define HAS_VFORK     / **/

/* Signal_t:
 *      This symbol's value is either "void" or "int", corresponding to the
 *      appropriate return type of a signal handler.  Thus, you can declare
 *      a signal handler using "Signal_t (*handler)()", and define the
 *      handler using "Signal_t handler(sig)".
 */
#define Signal_t int    /* Signal handler's return type */

/* HAS_VPRINTF:
 *      This symbol, if defined, indicates that the vprintf routine is available
 *      to printf with a pointer to an argument list.  If unavailable, you
 *      may need to write your own, probably in terms of _doprnt().
 */
/* USE_CHAR_VSPRINTF:
 *      This symbol is defined if this system has vsprintf() returning type
 *      (char*).  The trend seems to be to declare it as "int vsprintf()".  It
 *      is up to the package author to declare vsprintf correctly based on the
 *      symbol.
 */
#define HAS_VPRINTF     /**/
/*#define USE_CHAR_VSPRINTF     / **/

/* USE_DYNAMIC_LOADING:
 *      This symbol, if defined, indicates that dynamic loading of
 *      some sort is available.
 */
/*#define USE_DYNAMIC_LOADING           / **/

/* DOUBLESIZE:
 *      This symbol contains the size of a double, so that the C preprocessor
 *      can make decisions based on it.
 */
#define DOUBLESIZE 1            /**/

/* EBCDIC:
 *     This symbol, if defined, indicates that this system uses
 *      EBCDIC encoding.
 */
/*#define       EBCDIC          / **/

/* FFLUSH_NULL:
 *      This symbol, if defined, tells that fflush(NULL) does flush
 *      all pending stdio output.
 */
/* FFLUSH_ALL:
 *      This symbol, if defined, tells that to flush
 *      all pending stdio output one must loop through all
 *      the stdio file handles stored in an array and fflush them.
 *      Note that if fflushNULL is defined, fflushall will not
 *      even be probed for and will be left undefined.
 */
/*#define       FFLUSH_NULL             / **/
/*#define       FFLUSH_ALL              / **/

/* Fpos_t:
 *      This symbol holds the type used to declare file positions in libc.
 *      It can be fpos_t, long, uint, etc... It may be necessary to include
 *      <sys/types.h> to get any typedef'ed information.
 */
#define Fpos_t int              /* File position type */

/* Gid_t_f:
 *      This symbol defines the format string used for printing a Gid_t.
 */
#define Gid_t_f         "lu"            /**/

/* Gid_t_sign:
 *      This symbol holds the signedess of a Gid_t.
 *      1 for unsigned, -1 for signed.
 */
#define Gid_t_sign      1               /* GID sign */

/* Gid_t_size:
 *      This symbol holds the size of a Gid_t in bytes.
 */
#define Gid_t_size 4            /* GID size */

/* Gid_t:
 *      This symbol holds the return type of getgid() and the type of
 *      argument to setrgid() and related functions.  Typically,
 *      it is the type of group ids in the kernel. It can be int, ushort,
 *      gid_t, etc... It may be necessary to include <sys/types.h> to get
 *      any typedef'ed information.
 */
#define Gid_t int               /* Type for getgid(), etc... */

/* Groups_t:
 *      This symbol holds the type used for the second argument to
 *      getgroups() and setgroups().  Usually, this is the same as
 *      gidtype (gid_t) , but sometimes it isn't.
 *      It can be int, ushort, gid_t, etc... 
 *      It may be necessary to include <sys/types.h> to get any 
 *      typedef'ed information.  This is only required if you have
 *      getgroups() or setgroups()..
 */
#if defined(HAS_GETGROUPS) || defined(HAS_SETGROUPS)
#define Groups_t int    /* Type for 2nd arg to [sg]etgroups() */
#endif

/* DB_Prefix_t:
 *      This symbol contains the type of the prefix structure element
 *      in the <db.h> header file.  In older versions of DB, it was
 *      int, while in newer ones it is u_int32_t.
 */
/* DB_Hash_t:
 *      This symbol contains the type of the prefix structure element
 *      in the <db.h> header file.  In older versions of DB, it was
 *      int, while in newer ones it is size_t.
 */
#define DB_Hash_t       u_int32_t               /**/
#define DB_Prefix_t     size_t          /**/

/* I_GRP:
 *      This symbol, if defined, indicates to the C program that it should
 *      include <grp.h>.
 */
/* GRPASSWD:
 *      This symbol, if defined, indicates to the C program that struct group
 *      in <grp.h> contains gr_passwd.
 */
/*#define I_GRP         / **/
/*#define GRPASSWD      / **/

/* I_ICONV:
 *      This symbol, if defined, indicates that <iconv.h> exists and
 *      should be included.
 */
/*#define       I_ICONV         / **/

/* I_IEEEFP:
 *      This symbol, if defined, indicates that <ieeefp.h> exists and
 *      should be included.
 */
/*#define       I_IEEEFP                / **/

/* I_INTTYPES:
 *     This symbol, if defined, indicates to the C program that it should
 *     include <inttypes.h>.
 */
/*#define   I_INTTYPES                / **/

/* I_LIBUTIL:
 *      This symbol, if defined, indicates that <libutil.h> exists and
 *      should be included.
 */
/*#define       I_LIBUTIL               / **/

/* I_MACH_CTHREADS:
 *     This symbol, if defined, indicates to the C program that it should
 *     include <mach/cthreads.h>.
 */
/*#define   I_MACH_CTHREADS     / **/

/* I_MNTENT:
 *      This symbol, if defined, indicates that <mntent.h> exists and
 *      should be included.
 */
/*#define       I_MNTENT                / **/

/* I_NETDB:
 *      This symbol, if defined, indicates that <netdb.h> exists and
 *      should be included.
 */
/*#define I_NETDB               / **/

/* I_NETINET_TCP:
 *     This symbol, if defined, indicates to the C program that it should
 *     include <netinet/tcp.h>.
 */
/*#define   I_NETINET_TCP                / **/

/* I_POLL:
 *      This symbol, if defined, indicates that <poll.h> exists and
 *      should be included.
 */
/*#define       I_POLL          / **/

/* I_PROT:
 *      This symbol, if defined, indicates that <prot.h> exists and
 *      should be included.
 */
/*#define       I_PROT          / **/

/* I_PTHREAD:
 *     This symbol, if defined, indicates to the C program that it should
 *     include <pthread.h>.
 */
/*#define   I_PTHREAD   / **/

/* I_PWD:
 *      This symbol, if defined, indicates to the C program that it should
 *      include <pwd.h>.
 */
/* PWQUOTA:
 *      This symbol, if defined, indicates to the C program that struct passwd
 *      contains pw_quota.
 */
/* PWAGE:
 *      This symbol, if defined, indicates to the C program that struct passwd
 *      contains pw_age.
 */
/* PWCHANGE:
 *      This symbol, if defined, indicates to the C program that struct passwd
 *      contains pw_change.
 */
/* PWCLASS:
 *      This symbol, if defined, indicates to the C program that struct passwd
 *      contains pw_class.
 */
/* PWEXPIRE:
 *      This symbol, if defined, indicates to the C program that struct passwd
 *      contains pw_expire.
 */
/* PWCOMMENT:
 *      This symbol, if defined, indicates to the C program that struct passwd
 *      contains pw_comment.
 */
/* PWGECOS:
 *      This symbol, if defined, indicates to the C program that struct passwd
 *      contains pw_gecos.
 */
/* PWPASSWD:
 *      This symbol, if defined, indicates to the C program that struct passwd
 *      contains pw_passwd.
 */
/*#define I_PWD         / **/
/*#define PWQUOTA       / **/
/*#define PWAGE / **/
/*#define PWCHANGE      / **/
/*#define PWCLASS       / **/
/*#define PWEXPIRE      / **/
/*#define PWCOMMENT     / **/
/*#define PWGECOS       / **/
/*#define PWPASSWD      / **/

/* I_SHADOW:
 *      This symbol, if defined, indicates that <shadow.h> exists and
 *      should be included.
 */
/*#define       I_SHADOW                / **/

/* I_SOCKS:
 *      This symbol, if defined, indicates that <socks.h> exists and
 *      should be included.
 */
/*#define       I_SOCKS         / **/

/* I_SUNMATH:
 *      This symbol, if defined, indicates that <sunmath.h> exists and
 *      should be included.
 */
/*#define       I_SUNMATH               / **/

/* I_SYSLOG:
 *      This symbol, if defined, indicates that <syslog.h> exists and
 *      should be included.
 */
/*#define       I_SYSLOG                / **/

/* I_SYSMODE:
 *      This symbol, if defined, indicates that <sys/mode.h> exists and
 *      should be included.
 */
/*#define       I_SYSMODE               / **/

/* I_SYS_MOUNT:
 *      This symbol, if defined, indicates that <sys/mount.h> exists and
 *      should be included.
 */
/*#define       I_SYS_MOUNT             / **/

/* I_SYS_STATFS:
 *      This symbol, if defined, indicates that <sys/statfs.h> exists.
 */
/*#define       I_SYS_STATFS            / **/

/* I_SYS_STATVFS:
 *      This symbol, if defined, indicates that <sys/statvfs.h> exists and
 *      should be included.
 */
/*#define       I_SYS_STATVFS           / **/

/* I_SYSUIO:
 *      This symbol, if defined, indicates that <sys/uio.h> exists and
 *      should be included.
 */
/*#define       I_SYSUIO                / **/

/* I_SYSUTSNAME:
 *      This symbol, if defined, indicates that <sys/utsname.h> exists and
 *      should be included.
 */
/*#define       I_SYSUTSNAME            / **/

/* I_SYS_VFS:
 *      This symbol, if defined, indicates that <sys/vfs.h> exists and
 *      should be included.
 */
/*#define       I_SYS_VFS               / **/

/* I_TIME:
 *      This symbol, if defined, indicates to the C program that it should
 *      include <time.h>.
 */
/* I_SYS_TIME:
 *      This symbol, if defined, indicates to the C program that it should
 *      include <sys/time.h>.
 */
/* I_SYS_TIME_KERNEL:
 *      This symbol, if defined, indicates to the C program that it should
 *      include <sys/time.h> with KERNEL defined.
 */
#define I_TIME          /**/
/*#define I_SYS_TIME            / **/
/*#define I_SYS_TIME_KERNEL             / **/

/* I_USTAT:
 *      This symbol, if defined, indicates that <ustat.h> exists and
 *      should be included.
 */
/*#define       I_USTAT         / **/

/* PERL_INC_VERSION_LIST:
 *      This variable specifies the list of subdirectories in over
 *      which perl.c:incpush() and lib/lib.pm will automatically
 *      search when adding directories to @INC, in a format suitable
 *      for a C initialization string.  See the inc_version_list entry
 *      in Porting/Glossary for more details.
 */
#define PERL_INC_VERSION_LIST NULL              /**/

/* INSTALL_USR_BIN_PERL:
 *      This symbol, if defined, indicates that Perl is to be installed
 *      also as /usr/bin/perl.
 */
/*#define INSTALL_USR_BIN_PERL  / **/

/* PERL_PRIfldbl:
 *      This symbol, if defined, contains the string used by stdio to
 *      format long doubles (format 'f') for output.
 */
/* PERL_PRIgldbl:
 *      This symbol, if defined, contains the string used by stdio to
 *      format long doubles (format 'g') for output.
 */
/* PERL_PRIeldbl:
 *      This symbol, if defined, contains the string used by stdio to
 *      format long doubles (format 'e') for output.
 */
/* PERL_SCNfldbl:
 *      This symbol, if defined, contains the string used by stdio to
 *      format long doubles (format 'f') for input.
 */
/*#define PERL_PRIfldbl "llf"   / **/
/*#define PERL_PRIgldbl "llg"   / **/
/*#define PERL_PRIeldbl "lle"   / **/
/*#define PERL_SCNfldbl "llf"   / **/

/* Off_t:
 *      This symbol holds the type used to declare offsets in the kernel.
 *      It can be int, long, off_t, etc... It may be necessary to include
 *      <sys/types.h> to get any typedef'ed information.
 */
/* LSEEKSIZE:
 *      This symbol holds the number of bytes used by the Off_t.
 */
/* Off_t_size:
 *      This symbol holds the number of bytes used by the Off_t.
 */
#define Off_t int               /* <offset> type */
#define LSEEKSIZE 1             /* <offset> size */
#define Off_t_size 1    /* <offset> size */

/* Free_t:
 *      This variable contains the return type of free().  It is usually
 * void, but occasionally int.
 */
/* Malloc_t:
 *      This symbol is the type of pointer returned by malloc and realloc.
 */
#define Malloc_t void *                 /**/
#define Free_t int                      /**/

/* MYMALLOC:
 *      This symbol, if defined, indicates that we're using our own malloc.
 */
/*#define MYMALLOC                      / **/

/* Mode_t:
 *      This symbol holds the type used to declare file modes 
 *      for systems calls.  It is usually mode_t, but may be
 *      int or unsigned short.  It may be necessary to include <sys/types.h>
 *      to get any typedef'ed information.
 */
#define Mode_t int       /* file mode parameter for system calls */

/* VAL_O_NONBLOCK:
 *      This symbol is to be used during open() or fcntl(F_SETFL) to turn on
 *      non-blocking I/O for the file descriptor. Note that there is no way
 *      back, i.e. you cannot turn it blocking again this way. If you wish to
 *      alternatively switch between blocking and non-blocking, use the
 *      ioctl(FIOSNBIO) call instead, but that is not supported by all devices.
 */
/* VAL_EAGAIN:
 *      This symbol holds the errno error code set by read() when no data was
 *      present on the non-blocking file descriptor.
 */
/* RD_NODATA:
 *      This symbol holds the return code from read() when no data is present
 *      on the non-blocking file descriptor. Be careful! If EOF_NONBLOCK is
 *      not defined, then you can't distinguish between no data and EOF by
 *      issuing a read(). You'll have to find another way to tell for sure!
 */
/* EOF_NONBLOCK:
 *      This symbol, if defined, indicates to the C program that a read() on
 *      a non-blocking file descriptor will return 0 on EOF, and not the value
 *      held in RD_NODATA (-1 usually, in that case!).
 */
#define VAL_O_NONBLOCK O_NONBLOCK
#define VAL_EAGAIN EAGAIN
#define RD_NODATA -1
#undef EOF_NONBLOCK

/* NEED_VA_COPY:
 *      This symbol, if defined, indicates that the system stores
 *      the variable argument list datatype, va_list, in a format
 *      that cannot be copied by simple assignment, so that some
 *      other means must be used when copying is required.
 *      As such systems vary in their provision (or non-provision)
 *      of copying mechanisms, handy.h defines a platform-
 *      independent macro, Perl_va_copy(src, dst), to do the job.
 */
/*#define       NEED_VA_COPY            / **/

/* Netdb_host_t:
 *      This symbol holds the type used for the 1st argument
 *      to gethostbyaddr().
 */
/* Netdb_hlen_t:
 *      This symbol holds the type used for the 2nd argument
 *      to gethostbyaddr().
 */
/* Netdb_name_t:
 *      This symbol holds the type used for the argument to
 *      gethostbyname().
 */
/* Netdb_net_t:
 *      This symbol holds the type used for the 1st argument to
 *      getnetbyaddr().
 */
#define Netdb_host_t            const char * /**/
#define Netdb_hlen_t            int /**/
#define Netdb_name_t            const char * /**/
#define Netdb_net_t             unsigned long /**/

/* PERL_OTHERLIBDIRS:
 *      This variable contains a colon-separated set of paths for the perl
 *      binary to search for additional library files or modules.
 *      These directories will be tacked to the end of @INC.
 *      Perl will automatically search below each path for version-
 *      and architecture-specific directories.  See PERL_INC_VERSION_LIST
 *      for more details.
 */
/*#define PERL_OTHERLIBDIRS ""          / **/

/* IVTYPE:
 *      This symbol defines the C type used for Perl's IV.
 */
/* UVTYPE:
 *      This symbol defines the C type used for Perl's UV.
 */
/* I8TYPE:
 *      This symbol defines the C type used for Perl's I8.
 */
/* U8TYPE:
 *      This symbol defines the C type used for Perl's U8.
 */
/* I16TYPE:
 *      This symbol defines the C type used for Perl's I16.
 */
/* U16TYPE:
 *      This symbol defines the C type used for Perl's U16.
 */
/* I32TYPE:
 *      This symbol defines the C type used for Perl's I32.
 */
/* U32TYPE:
 *      This symbol defines the C type used for Perl's U32.
 */
/* I64TYPE:
 *      This symbol defines the C type used for Perl's I64.
 */
/* U64TYPE:
 *      This symbol defines the C type used for Perl's U64.
 */
/* NVTYPE:
 *      This symbol defines the C type used for Perl's NV.
 */
/* IVSIZE:
 *      This symbol contains the sizeof(IV).
 */
/* UVSIZE:
 *      This symbol contains the sizeof(UV).
 */
/* I8SIZE:
 *      This symbol contains the sizeof(I8).
 */
/* U8SIZE:
 *      This symbol contains the sizeof(U8).
 */
/* I16SIZE:
 *      This symbol contains the sizeof(I16).
 */
/* U16SIZE:
 *      This symbol contains the sizeof(U16).
 */
/* I32SIZE:
 *      This symbol contains the sizeof(I32).
 */
/* U32SIZE:
 *      This symbol contains the sizeof(U32).
 */
/* I64SIZE:
 *      This symbol contains the sizeof(I64).
 */
/* U64SIZE:
 *      This symbol contains the sizeof(U64).
 */
/* NVSIZE:
 *      This symbol contains the sizeof(NV).
 */
/* NV_PRESERVES_UV:
 *      This symbol, if defined, indicates that a variable of type NVTYPE
 *      can preserve all the bits of a variable of type UVTYPE.
 */
/* NV_PRESERVES_UV_BITS:
 *      This symbol contains the number of bits a variable of type NVTYPE
 *      can preserve of a variable of type UVTYPE.
 */
#define IVTYPE          long            /**/
#define UVTYPE          unsigned long           /**/
#define I8TYPE          char            /**/
#define U8TYPE          unsigned char           /**/
#define I16TYPE         short   /**/
#define U16TYPE         unsigned short  /**/
#define I32TYPE         long    /**/
#define U32TYPE         unsigned long   /**/
#ifdef HAS_QUAD
#define I64TYPE         int64_t /**/
#define U64TYPE         uint64_t        /**/
#endif
#define NVTYPE          double          /**/
#define IVSIZE          4               /**/
#define UVSIZE          4               /**/
#define I8SIZE          1               /**/
#define U8SIZE          1               /**/
#define I16SIZE         2       /**/
#define U16SIZE         2       /**/
#define I32SIZE         4       /**/
#define U32SIZE         4       /**/
#ifdef HAS_QUAD
#define I64SIZE         8       /**/
#define U64SIZE         8       /**/
#endif
#define NVSIZE          8               /**/
#undef  NV_PRESERVES_UV
#define NV_PRESERVES_UV_BITS    0

/* IVdf:
 *      This symbol defines the format string used for printing a Perl IV
 *      as a signed decimal integer.
 */
/* UVuf:
 *      This symbol defines the format string used for printing a Perl UV
 *      as an unsigned decimal integer.
 */
/* UVof:
 *      This symbol defines the format string used for printing a Perl UV
 *      as an unsigned octal integer.
 */
/* UVxf:
 *      This symbol defines the format string used for printing a Perl UV
 *      as an unsigned hexadecimal integer in lowercase abcdef.
 */
/* UVXf:
 *      This symbol defines the format string used for printing a Perl UV
 *      as an unsigned hexadecimal integer in uppercase ABCDEF.
 */
/* NVef:
 *      This symbol defines the format string used for printing a Perl NV
 *      using %e-ish floating point format.
 */
/* NVff:
 *      This symbol defines the format string used for printing a Perl NV
 *      using %f-ish floating point format.
 */
/* NVgf:
 *      This symbol defines the format string used for printing a Perl NV
 *      using %g-ish floating point format.
 */
#define IVdf            "ld"            /**/
#define UVuf            "lu"            /**/
#define UVof            "lo"            /**/
#define UVxf            "lx"            /**/
#define UVXf            "lX"            /**/
#define NVef            "e"             /**/
#define NVff            "f"             /**/
#define NVgf            "g"             /**/

/* Pid_t:
 *      This symbol holds the type used to declare process ids in the kernel.
 *      It can be int, uint, pid_t, etc... It may be necessary to include
 *      <sys/types.h> to get any typedef'ed information.
 */
#define Pid_t int               /* PID type */

/* PRIVLIB:
 *      This symbol contains the name of the private library for this package.
 *      The library is private in the sense that it needn't be in anyone's
 *      execution path, but it should be accessible by the world.  The program
 *      should be prepared to do ~ expansion.
 */
/* PRIVLIB_EXP:
 *      This symbol contains the ~name expanded version of PRIVLIB, to be used
 *      in programs that are not prepared to deal with ~ expansion at run-time.
 */
#define PRIVLIB "/usr/local/lib/perl5/5.7"              /**/
#define PRIVLIB_EXP "/usr/local/lib/perl5/5.7"          /**/

/* PTRSIZE:
 *      This symbol contains the size of a pointer, so that the C preprocessor
 *      can make decisions based on it.  It will be sizeof(void *) if
 *      the compiler supports (void *); otherwise it will be
 *      sizeof(char *).
 */
#define PTRSIZE 1               /**/

/* Drand01:
 *      This macro is to be used to generate uniformly distributed
 *      random numbers over the range [0., 1.[.  You may have to supply
 *      an 'extern double drand48();' in your program since SunOS 4.1.3
 *      doesn't provide you with anything relevant in it's headers.
 *      See HAS_DRAND48_PROTO.
 */
/* Rand_seed_t:
 *      This symbol defines the type of the argument of the
 *      random seed function.
 */
/* seedDrand01:
 *      This symbol defines the macro to be used in seeding the
 *      random number generator (see Drand01).
 */
/* RANDBITS:
 *      This symbol indicates how many bits are produced by the
 *      function used to generate normalized random numbers.
 *      Values include 15, 16, 31, and 48.
 */
#define Drand01()               ((rand() & 0x7FFF) / (double) ((unsigned long)1 << 15))         /**/
#define Rand_seed_t             int             /**/
#define seedDrand01(x)  srand((Rand_seed_t)x)   /**/
#define RANDBITS                48              /**/

/* SELECT_MIN_BITS:
 *      This symbol holds the minimum number of bits operated by select.
 *      That is, if you do select(n, ...), how many bits at least will be
 *      cleared in the masks if some activity is detected.  Usually this
 *      is either n or 32*ceil(n/32), especially many little-endians do
 *      the latter.  This is only useful if you have select(), naturally.
 */
#define SELECT_MIN_BITS         32      /**/

/* Select_fd_set_t:
 *      This symbol holds the type used for the 2nd, 3rd, and 4th
 *      arguments to select.  Usually, this is 'fd_set *', if HAS_FD_SET
 *      is defined, and 'int *' otherwise.  This is only useful if you 
 *      have select(), of course.
 */
#define Select_fd_set_t         int     /**/

/* SIG_NAME:
 *      This symbol contains a list of signal names in order of
 *      signal number. This is intended
 *      to be used as a static array initialization, like this:
 *              char *sig_name[] = { SIG_NAME };
 *      The signals in the list are separated with commas, and each signal
 *      is surrounded by double quotes. There is no leading SIG in the signal
 *      name, i.e. SIGQUIT is known as "QUIT".
 *      Gaps in the signal numbers (up to NSIG) are filled in with NUMnn,
 *      etc., where nn is the actual signal number (e.g. NUM37).
 *      The signal number for sig_name[i] is stored in sig_num[i].
 *      The last element is 0 to terminate the list with a NULL.  This
 *      corresponds to the 0 at the end of the sig_num list.
 */
/* SIG_NUM:
 *      This symbol contains a list of signal numbers, in the same order as the
 *      SIG_NAME list. It is suitable for static array initialization, as in:
 *              int sig_num[] = { SIG_NUM };
 *      The signals in the list are separated with commas, and the indices
 *      within that list and the SIG_NAME list match, so it's easy to compute
 *      the signal name from a number or vice versa at the price of a small
 *      dynamic linear lookup. 
 *      Duplicates are allowed, but are moved to the end of the list.
 *      The signal number corresponding to sig_name[i] is sig_number[i].
 *      if (i < NSIG) then sig_number[i] == i.  
 *      The last element is 0, corresponding to the 0 at the end of
 *      the sig_name list.
 */
/* SIG_SIZE:
 *      This variable contains the number of elements of the sig_name
 *      and sig_num arrays, excluding the final NULL entry.
 */
#define SIG_NAME 0              /**/
#define SIG_NUM  0              /**/
#define SIG_SIZE 1                      /**/

/* SITEARCH:
 *      This symbol contains the name of the private library for this package.
 *      The library is private in the sense that it needn't be in anyone's
 *      execution path, but it should be accessible by the world.  The program
 *      should be prepared to do ~ expansion.
 *      The standard distribution will put nothing in this directory.
 *      After perl has been installed, users may install their own local
 *      architecture-dependent modules in this directory with
 *              MakeMaker Makefile.PL
 *      or equivalent.  See INSTALL for details.
 */
/* SITEARCH_EXP:
 *      This symbol contains the ~name expanded version of SITEARCH, to be used
 *      in programs that are not prepared to deal with ~ expansion at run-time.
 */
#define SITEARCH ""             /**/
#define SITEARCH_EXP ""         /**/

/* SITELIB:
 *      This symbol contains the name of the private library for this package.
 *      The library is private in the sense that it needn't be in anyone's
 *      execution path, but it should be accessible by the world.  The program
 *      should be prepared to do ~ expansion.
 *      The standard distribution will put nothing in this directory.
 *      After perl has been installed, users may install their own local
 *      architecture-independent modules in this directory with
 *              MakeMaker Makefile.PL
 *      or equivalent.  See INSTALL for details.
 */
/* SITELIB_EXP:
 *      This symbol contains the ~name expanded version of SITELIB, to be used
 *      in programs that are not prepared to deal with ~ expansion at run-time.
 */
/* SITELIB_STEM:
 *      This define is SITELIB_EXP with any trailing version-specific component
 *      removed.  The elements in inc_version_list (inc_version_list.U) can
 *      be tacked onto this variable to generate a list of directories to search.
 */
#define SITELIB ""              /**/
#define SITELIB_EXP ""          /**/
#define SITELIB_STEM ""         /**/

/* Size_t_size:
 *      This symbol holds the size of a Size_t in bytes.
 */
#define Size_t_size 1           /* */

/* Size_t:
 *      This symbol holds the type used to declare length parameters
 *      for string functions.  It is usually size_t, but may be
 *      unsigned long, int, etc.  It may be necessary to include
 *      <sys/types.h> to get any typedef'ed information.
 */
#define Size_t int       /* length paramater for string functions */

/* Sock_size_t:
 *      This symbol holds the type used for the size argument of
 *      various socket calls (just the base type, not the pointer-to).
 */
#define Sock_size_t             int /**/

/* SSize_t:
 *      This symbol holds the type used by functions that return
 *      a count of bytes or an error condition.  It must be a signed type.
 *      It is usually ssize_t, but may be long or int, etc.
 *      It may be necessary to include <sys/types.h> or <unistd.h>
 *      to get any typedef'ed information.
 *      We will pick a type such that sizeof(SSize_t) == sizeof(Size_t).
 */
#define SSize_t int      /* signed count of bytes */

/* STARTPERL:
 *      This variable contains the string to put in front of a perl
 *      script to make sure (one hopes) that it runs with perl and not
 *      some shell.
 */
#define STARTPERL ""            /**/

/* STDCHAR:
 *      This symbol is defined to be the type of char used in stdio.h.
 *      It has the values "unsigned char" or "char".
 */
#define STDCHAR char    /**/

/* HAS_STDIO_STREAM_ARRAY:
 *      This symbol, if defined, tells that there is an array
 *      holding the stdio streams.
 */
/* STDIO_STREAM_ARRAY:
 *      This symbol tells the name of the array holding the stdio streams.
 *      Usual values include _iob, __iob, and __sF.
 */
/*#define       HAS_STDIO_STREAM_ARRAY  / **/
#define STDIO_STREAM_ARRAY      

/* Uid_t_f:
 *      This symbol defines the format string used for printing a Uid_t.
 */
#define Uid_t_f         "lu"            /**/

/* Uid_t_sign:
 *      This symbol holds the signedess of a Uid_t.
 *      1 for unsigned, -1 for signed.
 */
#define Uid_t_sign      1               /* UID sign */

/* Uid_t_size:
 *      This symbol holds the size of a Uid_t in bytes.
 */
#define Uid_t_size 4            /* UID size */

/* Uid_t:
 *      This symbol holds the type used to declare user ids in the kernel.
 *      It can be int, ushort, uid_t, etc... It may be necessary to include
 *      <sys/types.h> to get any typedef'ed information.
 */
#define Uid_t int               /* UID type */

/* USE_64_BIT_INT:
 *      This symbol, if defined, indicates that 64-bit integers should
 *      be used when available.  If not defined, the native integers
 *      will be employed (be they 32 or 64 bits).  The minimal possible
 *      64-bitness is used, just enough to get 64-bit integers into Perl.
 *      This may mean using for example "long longs", while your memory
 *      may still be limited to 2 gigabytes.
 */
/* USE_64_BIT_ALL:
 *      This symbol, if defined, indicates that 64-bit integers should
 *      be used when available.  If not defined, the native integers
 *      will be used (be they 32 or 64 bits).  The maximal possible
 *      64-bitness is employed: LP64 or ILP64, meaning that you will
 *      be able to use more than 2 gigabytes of memory.  This mode is
 *      even more binary incompatible than USE_64_BIT_INT. You may not
 *      be able to run the resulting executable in a 32-bit CPU at all or
 *      you may need at least to reboot your OS to 64-bit mode.
 */
#ifndef USE_64_BIT_INT
/*#define       USE_64_BIT_INT          / **/
#endif

#ifndef USE_64_BIT_ALL
/*#define       USE_64_BIT_ALL          / **/
#endif

/* USE_LARGE_FILES:
 *      This symbol, if defined, indicates that large file support
 *      should be used when available.
 */
#ifndef USE_LARGE_FILES
/*#define       USE_LARGE_FILES         / **/
#endif

/* USE_LONG_DOUBLE:
 *      This symbol, if defined, indicates that long doubles should
 *      be used when available.
 */
#ifndef USE_LONG_DOUBLE
/*#define       USE_LONG_DOUBLE         / **/
#endif

/* USE_MORE_BITS:
 *      This symbol, if defined, indicates that 64-bit interfaces and
 *      long doubles should be used when available.
 */
#ifndef USE_MORE_BITS
/*#define       USE_MORE_BITS           / **/
#endif

/* MULTIPLICITY:
 *      This symbol, if defined, indicates that Perl should
 *      be built to use multiplicity.
 */
#ifndef MULTIPLICITY
/*#define       MULTIPLICITY            / **/
#endif

/* USE_PERLIO:
 *      This symbol, if defined, indicates that the PerlIO abstraction should
 *      be used throughout.  If not defined, stdio should be
 *      used in a fully backward compatible manner.
 */
#ifndef USE_PERLIO
/*#define       USE_PERLIO              / **/
#endif

/* USE_SOCKS:
 *      This symbol, if defined, indicates that Perl should
 *      be built to use socks.
 */
#ifndef USE_SOCKS
/*#define       USE_SOCKS               / **/
#endif

/* USE_ITHREADS:
 *      This symbol, if defined, indicates that Perl should be built to
 *      use the interpreter-based threading implementation.
 */
/* USE_5005THREADS:
 *      This symbol, if defined, indicates that Perl should be built to
 *      use the 5.005-based threading implementation.
 */
/* OLD_PTHREADS_API:
 *      This symbol, if defined, indicates that Perl should
 *      be built to use the old draft POSIX threads API.
 */
/*#define       USE_5005THREADS         / **/
/*#define       USE_ITHREADS            / **/
#if defined(USE_5005THREADS) && !defined(USE_ITHREADS)
#define         USE_THREADS             /* until src is revised*/
#endif
/*#define       OLD_PTHREADS_API                / **/

/* PERL_VENDORARCH:
 *      If defined, this symbol contains the name of a private library.
 *      The library is private in the sense that it needn't be in anyone's
 *      execution path, but it should be accessible by the world.
 *      It may have a ~ on the front. 
 *      The standard distribution will put nothing in this directory.
 *      Vendors who distribute perl may wish to place their own
 *      architecture-dependent modules and extensions in this directory with
 *              MakeMaker Makefile.PL INSTALLDIRS=vendor 
 *      or equivalent.  See INSTALL for details.
 */
/* PERL_VENDORARCH_EXP:
 *      This symbol contains the ~name expanded version of PERL_VENDORARCH, to be used
 *      in programs that are not prepared to deal with ~ expansion at run-time.
 */
/*#define PERL_VENDORARCH ""            / **/
/*#define PERL_VENDORARCH_EXP ""                / **/

/* PERL_VENDORLIB_EXP:
 *      This symbol contains the ~name expanded version of VENDORLIB, to be used
 *      in programs that are not prepared to deal with ~ expansion at run-time.
 */
/* PERL_VENDORLIB_STEM:
 *      This define is PERL_VENDORLIB_EXP with any trailing version-specific component
 *      removed.  The elements in inc_version_list (inc_version_list.U) can
 *      be tacked onto this variable to generate a list of directories to search.
 */
/*#define PERL_VENDORLIB_EXP ""         / **/
/*#define PERL_VENDORLIB_STEM ""                / **/

/* VOIDFLAGS:
 *      This symbol indicates how much support of the void type is given by this
 *      compiler.  What various bits mean:
 *
 *          1 = supports declaration of void
 *          2 = supports arrays of pointers to functions returning void
 *          4 = supports comparisons between pointers to void functions and
 *                  addresses of void functions
 *          8 = suports declaration of generic void pointers
 *
 *      The package designer should define VOIDUSED to indicate the requirements
 *      of the package.  This can be done either by #defining VOIDUSED before
 *      including config.h, or by defining defvoidused in Myinit.U.  If the
 *      latter approach is taken, only those flags will be tested.  If the
 *      level of void support necessary is not present, defines void to int.
 */
#ifndef VOIDUSED
#define VOIDUSED 1
#endif
#define VOIDFLAGS 1
#if (VOIDFLAGS & VOIDUSED) != VOIDUSED
#define void int                /* is void to be avoided? */
#define M_VOID                  /* Xenix strikes again */
#endif

/* PERL_XS_APIVERSION:
 *      This variable contains the version of the oldest perl binary
 *      compatible with the present perl.  perl.c:incpush() and
 *      lib/lib.pm will automatically search in  for older
 *      directories across major versions back to xs_apiversion.
 *      This is only useful if you have a perl library directory tree
 *      structured like the default one.
 *      See INSTALL for how this works.
 *      The versioned site_perl directory was introduced in 5.005,
 *      so that is the lowest possible value.
 *      Since this can depend on compile time options (such as
 *      bincompat) it is set by Configure.  Other non-default sources
 *      of potential incompatibility, such as multiplicity, threads,
 *      debugging, 64bits, sfio, etc., are not checked for currently,
 *      though in principle we could go snooping around in old
 *      Config.pm files.
 */
/* PERL_PM_APIVERSION:
 *      This variable contains the version of the oldest perl
 *      compatible with the present perl.  (That is, pure perl modules
 *      written for pm_apiversion will still work for the current
 *      version).  perl.c:incpush() and lib/lib.pm will automatically
 *      search in  for older directories across major versions
 *      back to pm_apiversion.  This is only useful if you have a perl
 *      library directory tree structured like the default one.  The
 *      versioned site_perl library was introduced in 5.005, so that's
 *      the default setting for this variable.  It's hard to imagine
 *      it changing before Perl6.  It is included here for symmetry
 *      with xs_apiveprsion -- the searching algorithms will
 *      (presumably) be similar.
 *      See the INSTALL file for how this works.
 */
#define PERL_XS_APIVERSION "5.005"
#define PERL_PM_APIVERSION "5.005"

/* HAS_SIGPROCMASK:
 *      This symbol, if defined, indicates that the sigprocmask
 *      system call is available to examine or change the signal mask
 *      of the calling process.
 */
/*#define HAS_SIGPROCMASK               / **/

/* HAS_SOCKATMARK:
 *      This symbol, if defined, indicates that the sockatmark routine is
 *      available to test whether a socket is at the out-of-band mark.
 */
/*#define HAS_SOCKATMARK                / **/

#endif