2 * This file was produced by running the config_h.SH script, which
3 * gets its values from uconfig.sh, which is generally produced by
6 * Feel free to modify any of this as the need arises. Note, however,
7 * that running config_h.SH again will wipe out any changes you've made.
8 * For a more permanent change edit uconfig.sh and rerun config_h.SH.
10 * $Id: Config_h.U,v 3.0.1.5 1997/02/28 14:57:43 ram Exp $
18 * Target system : unknown
25 * This symbol holds the complete pathname to the sed program.
27 #define LOC_SED "" /**/
30 * This symbol, if defined, indicates that the alarm routine is
33 /*#define HAS_ALARM / **/
36 * This symbol indicates the C compiler can check for function attributes,
37 * such as printf formats. This is normally only supported by GNU cc.
39 /*#define HASATTRIBUTE / **/
41 #define __attribute__(_arg_)
45 * This symbol is defined if the bcmp() routine is available to
46 * compare blocks of memory.
48 /*#define HAS_BCMP / **/
51 * This symbol is defined if the bcopy() routine is available to
52 * copy blocks of memory.
54 /*#define HAS_BCOPY / **/
57 * This symbol is defined if the bzero() routine is available to
58 * set a memory block to 0.
60 /*#define HAS_BZERO / **/
63 * This symbol, if defined, indicates that the chown routine is
66 /*#define HAS_CHOWN / **/
69 * This symbol, if defined, indicates that the chroot routine is
72 /*#define HAS_CHROOT / **/
75 * This symbol, if defined, indicates that the chsize routine is available
76 * to truncate files. You might need a -lx to get this routine.
78 /*#define HAS_CHSIZE / **/
81 * This symbol, if defined, indicates that this C compiler knows about
82 * the const type. There is no need to actually test for that symbol
83 * within your programs. The mere use of the "const" keyword will
84 * trigger the necessary tests.
86 /*#define HASCONST / **/
92 * This symbol, if defined, indicates that the crypt routine is available
93 * to encrypt passwords and the like.
95 /*#define HAS_CRYPT / **/
98 * This symbol, if defined, indicates that the cuserid routine is
99 * available to get character login names.
101 /*#define HAS_CUSERID / **/
104 * This symbol, if defined, indicates that this system's <float.h>
105 * or <limits.h> defines the symbol DBL_DIG, which is the number
106 * of significant digits in a double precision number. If this
107 * symbol is not defined, a guess of 15 is usually pretty good.
109 /*#define HAS_DBL_DIG / * */
112 * This symbol, if defined, indicates that the difftime routine is
115 /*#define HAS_DIFFTIME / **/
118 * This symbol, if defined, indicates that the dlerror routine is
119 * available to return a string describing the last error that
120 * occurred from a call to dlopen(), dlclose() or dlsym().
122 /*#define HAS_DLERROR / **/
124 /* SETUID_SCRIPTS_ARE_SECURE_NOW:
125 * This symbol, if defined, indicates that the bug that prevents
126 * setuid scripts from being secure is not present in this kernel.
129 * This symbol, if defined, indicates that the C program should
130 * check the script that it is executing for setuid/setgid bits, and
131 * attempt to emulate setuid/setgid on systems that have disabled
132 * setuid #! scripts because the kernel can't do it securely.
133 * It is up to the package designer to make sure that this emulation
134 * is done securely. Among other things, it should do an fstat on
135 * the script it just opened to make sure it really is a setuid/setgid
136 * script, it should make sure the arguments passed correspond exactly
137 * to the argument on the #! line, and it should not trust any
138 * subprocesses to which it must pass the filename rather than the
139 * file descriptor of the script to be executed.
141 /*#define SETUID_SCRIPTS_ARE_SECURE_NOW / **/
142 /*#define DOSUID / **/
145 * This symbol, if defined, indicates that the dup2 routine is
146 * available to duplicate file descriptors.
148 /*#define HAS_DUP2 / **/
151 * This symbol, if defined, indicates that the fchmod routine is available
152 * to change mode of opened files. If unavailable, use chmod().
154 /*#define HAS_FCHMOD / **/
157 * This symbol, if defined, indicates that the fchown routine is available
158 * to change ownership of opened files. If unavailable, use chown().
160 /*#define HAS_FCHOWN / **/
163 * This symbol, if defined, indicates to the C program that
164 * the fcntl() function exists.
166 /*#define HAS_FCNTL / **/
169 * This symbol, if defined, indicates that the fgetpos routine is
170 * available to get the file position indicator, similar to ftell().
172 /*#define HAS_FGETPOS / **/
175 * This symbol, if defined, indicates that the flock routine is
176 * available to do file locking.
178 /*#define HAS_FLOCK / **/
181 * This symbol, if defined, indicates that the fork routine is
184 #define HAS_FORK /**/
187 * This symbol, if defined, indicates that the fsetpos routine is
188 * available to set the file position indicator, similar to fseek().
190 /*#define HAS_FSETPOS / **/
193 * This symbol, if defined, indicates that the gettimeofday() system
194 * call is available for a sub-second accuracy clock. Usually, the file
195 * <sys/resource.h> needs to be included (see I_SYS_RESOURCE).
196 * The type "Timeval" should be used to refer to "struct timeval".
198 /*#define HAS_GETTIMEOFDAY / **/
199 #ifdef HAS_GETTIMEOFDAY
200 #define Timeval struct timeval /* Structure used by gettimeofday() */
204 * This symbol, if defined, indicates that the getgroups() routine is
205 * available to get the list of process groups. If unavailable, multiple
206 * groups are probably not supported.
208 /*#define HAS_GETGROUPS / **/
211 * This symbol, if defined, indicates that the getlogin routine is
212 * available to get the login name.
214 /*#define HAS_GETLOGIN / **/
217 * This symbol, if defined, indicates to the C program that
218 * the getpgid(pid) function is available to get the
221 /*#define HAS_GETPGID / **/
224 * This symbol, if defined, indicates that the getpgrp2() (as in DG/UX)
225 * routine is available to get the current process group.
227 /*#define HAS_GETPGRP2 / **/
230 * This symbol, if defined, indicates that the getppid routine is
231 * available to get the parent process ID.
233 /*#define HAS_GETPPID / **/
236 * This symbol, if defined, indicates that the getpriority routine is
237 * available to get a process's priority.
239 /*#define HAS_GETPRIORITY / **/
242 * This symbol, if defined, indicates to the C program that the
243 * inet_aton() function is available to parse IP address "dotted-quad"
246 /*#define HAS_INET_ATON / **/
249 * This symbol, if defined, indicates that the killpg routine is available
250 * to kill process groups. If unavailable, you probably should use kill
251 * with a negative process number.
253 /*#define HAS_KILLPG / **/
256 * This symbol, if defined, indicates that the link routine is
257 * available to create hard links.
259 /*#define HAS_LINK / **/
262 * This symbol, if defined, indicates that the localeconv routine is
263 * available for numeric and monetary formatting conventions.
265 /*#define HAS_LOCALECONV / **/
268 * This symbol, if defined, indicates that the lockf routine is
269 * available to do file locking.
271 /*#define HAS_LOCKF / **/
274 * This symbol, if defined, indicates that the lstat routine is
275 * available to do file stats on symbolic links.
277 /*#define HAS_LSTAT / **/
280 * This symbol, if defined, indicates that the mblen routine is available
281 * to find the number of bytes in a multibye character.
283 /*#define HAS_MBLEN / **/
286 * This symbol, if defined, indicates that the mbstowcs routine is
287 * available to covert a multibyte string into a wide character string.
289 /*#define HAS_MBSTOWCS / **/
292 * This symbol, if defined, indicates that the mbtowc routine is available
293 * to covert a multibyte to a wide character.
295 /*#define HAS_MBTOWC / **/
298 * This symbol, if defined, indicates that the memcmp routine is available
299 * to compare blocks of memory.
301 /*#define HAS_MEMCMP / **/
304 * This symbol, if defined, indicates that the memcpy routine is available
305 * to copy blocks of memory.
307 /*#define HAS_MEMCPY / **/
310 * This symbol, if defined, indicates that the memmove routine is available
311 * to copy potentially overlapping blocks of memory. This should be used
312 * only when HAS_SAFE_BCOPY is not defined. If neither is there, roll your
315 /*#define HAS_MEMMOVE / **/
318 * This symbol, if defined, indicates that the memset routine is available
319 * to set blocks of memory.
321 /*#define HAS_MEMSET / **/
324 * This symbol, if defined, indicates that the mkdir routine is available
325 * to create directories. Otherwise you should fork off a new process to
328 /*#define HAS_MKDIR / **/
331 * This symbol, if defined, indicates that the mkfifo routine is
332 * available to create FIFOs. Otherwise, mknod should be able to
333 * do it for you. However, if mkfifo is there, mknod might require
334 * super-user privileges which mkfifo will not.
336 /*#define HAS_MKFIFO / **/
339 * This symbol, if defined, indicates that the mktime routine is
342 /*#define HAS_MKTIME / **/
345 * This symbol, if defined, indicates that the msync system call is
346 * available to synchronize a mapped file.
348 /*#define HAS_MSYNC / **/
351 * This symbol, if defined, indicates that the munmap system call is
352 * available to unmap a region, usually mapped by mmap().
354 /*#define HAS_MUNMAP / **/
357 * This symbol, if defined, indicates that the nice routine is
360 /*#define HAS_NICE / **/
363 * This symbol, if defined, indicates that pathconf() is available
364 * to determine file-system related limits and options associated
365 * with a given filename.
368 * This symbol, if defined, indicates that pathconf() is available
369 * to determine file-system related limits and options associated
370 * with a given open file descriptor.
372 /*#define HAS_PATHCONF / **/
373 /*#define HAS_FPATHCONF / **/
376 * This symbol, if defined, indicates that the pause routine is
377 * available to suspend a process until a signal is received.
379 /*#define HAS_PAUSE / **/
382 * This symbol, if defined, indicates that the pipe routine is
383 * available to create an inter-process channel.
385 /*#define HAS_PIPE / **/
388 * This symbol, if defined, indicates that the poll routine is
389 * available to poll active file descriptors. You may safely
390 * include <poll.h> when this symbol is defined.
392 /*#define HAS_POLL / **/
395 * This symbol, if defined, indicates that the readdir routine is
396 * available to read directory entries. You may have to include
397 * <dirent.h>. See I_DIRENT.
399 /*#define HAS_READDIR / **/
402 * This symbol, if defined, indicates that the seekdir routine is
403 * available. You may have to include <dirent.h>. See I_DIRENT.
405 /*#define HAS_SEEKDIR / **/
408 * This symbol, if defined, indicates that the telldir routine is
409 * available. You may have to include <dirent.h>. See I_DIRENT.
411 /*#define HAS_TELLDIR / **/
414 * This symbol, if defined, indicates that the rewinddir routine is
415 * available. You may have to include <dirent.h>. See I_DIRENT.
417 /*#define HAS_REWINDDIR / **/
420 * This symbol, if defined, indicates that the readlink routine is
421 * available to read the value of a symbolic link.
423 /*#define HAS_READLINK / **/
426 * This symbol, if defined, indicates that the rename routine is available
427 * to rename files. Otherwise you should do the unlink(), link(), unlink()
430 /*#define HAS_RENAME / **/
433 * This symbol, if defined, indicates that the rmdir routine is
434 * available to remove directories. Otherwise you should fork off a
435 * new process to exec /bin/rmdir.
437 /*#define HAS_RMDIR / **/
440 * This symbol, if defined, indicates that the select routine is
441 * available to select active file descriptors. If the timeout field
442 * is used, <sys/time.h> may need to be included.
444 /*#define HAS_SELECT / **/
447 * This symbol, if defined, indicates that the setegid routine is available
448 * to change the effective gid of the current program.
450 /*#define HAS_SETEGID / **/
453 * This symbol, if defined, indicates that the seteuid routine is available
454 * to change the effective uid of the current program.
456 /*#define HAS_SETEUID / **/
459 * This symbol, if defined, indicates that the setlinebuf routine is
460 * available to change stderr or stdout from block-buffered or unbuffered
461 * to a line-buffered mode.
463 /*#define HAS_SETLINEBUF / **/
466 * This symbol, if defined, indicates that the setlocale routine is
467 * available to handle locale-specific ctype implementations.
469 /*#define HAS_SETLOCALE / **/
472 * This symbol, if defined, indicates that the setpgid(pid, gpid)
473 * routine is available to set process group ID.
475 /*#define HAS_SETPGID / **/
478 * This symbol, if defined, indicates that the setpgrp2() (as in DG/UX)
479 * routine is available to set the current process group.
481 /*#define HAS_SETPGRP2 / **/
484 * This symbol, if defined, indicates that the setpriority routine is
485 * available to set a process's priority.
487 /*#define HAS_SETPRIORITY / **/
490 * This symbol, if defined, indicates that the setregid routine is
491 * available to change the real and effective gid of the current
495 * This symbol, if defined, indicates that the setresgid routine is
496 * available to change the real, effective and saved gid of the current
499 /*#define HAS_SETREGID / **/
500 /*#define HAS_SETRESGID / **/
503 * This symbol, if defined, indicates that the setreuid routine is
504 * available to change the real and effective uid of the current
508 * This symbol, if defined, indicates that the setresuid routine is
509 * available to change the real, effective and saved uid of the current
512 /*#define HAS_SETREUID / **/
513 /*#define HAS_SETRESUID / **/
516 * This symbol, if defined, indicates that the setrgid routine is available
517 * to change the real gid of the current program.
519 /*#define HAS_SETRGID / **/
522 * This symbol, if defined, indicates that the setruid routine is available
523 * to change the real uid of the current program.
525 /*#define HAS_SETRUID / **/
528 * This symbol, if defined, indicates that the setsid routine is
529 * available to set the process group ID.
531 /*#define HAS_SETSID / **/
534 * This symbol holds the return type of the shmat() system call.
535 * Usually set to 'void *' or 'char *'.
537 /* HAS_SHMAT_PROTOTYPE:
538 * This symbol, if defined, indicates that the sys/shm.h includes
539 * a prototype for shmat(). Otherwise, it is up to the program to
540 * guess one. Shmat_t shmat _((int, Shmat_t, int)) is a good guess,
541 * but not always right so it should be emitted by the program only
542 * when HAS_SHMAT_PROTOTYPE is not defined to avoid conflicting defs.
544 #define Shmat_t void * /**/
545 /*#define HAS_SHMAT_PROTOTYPE / **/
548 * This symbol is defined to indicate that the strchr()/strrchr()
549 * functions are available for string searching. If not, try the
550 * index()/rindex() pair.
553 * This symbol is defined to indicate that the index()/rindex()
554 * functions are available for string searching.
556 /*#define HAS_STRCHR / **/
557 /*#define HAS_INDEX / **/
560 * This symbol, if defined, indicates that the strcoll routine is
561 * available to compare strings using collating information.
563 /*#define HAS_STRCOLL / **/
566 * This symbol, if defined, indicates that this C compiler knows how
567 * to copy structures. If undefined, you'll need to use a block copy
568 * routine of some sort instead.
570 /*#define USE_STRUCT_COPY / **/
573 * This symbol, if defined, indicates that the strtod routine is
574 * available to provide better numeric string conversion than atof().
576 /*#define HAS_STRTOD / **/
579 * This symbol, if defined, indicates that the strtol routine is available
580 * to provide better numeric string conversion than atoi() and friends.
582 /*#define HAS_STRTOL / **/
585 * This symbol, if defined, indicates that the strtoul routine is
586 * available to provide conversion of strings to unsigned long.
588 /*#define HAS_STRTOUL / **/
591 * This symbol, if defined, indicates that the strxfrm() routine is
592 * available to transform strings.
594 /*#define HAS_STRXFRM / **/
597 * This symbol, if defined, indicates that the symlink routine is available
598 * to create symbolic links.
600 /*#define HAS_SYMLINK / **/
603 * This symbol, if defined, indicates that the syscall routine is
604 * available to call arbitrary system calls. If undefined, that's tough.
606 /*#define HAS_SYSCALL / **/
609 * This symbol, if defined, indicates that sysconf() is available
610 * to determine system related limits and options.
612 /*#define HAS_SYSCONF / **/
615 * This symbol, if defined, indicates that the system routine is
616 * available to issue a shell command.
618 /*#define HAS_SYSTEM / **/
621 * This symbol, if defined, indicates that the tcgetpgrp routine is
622 * available to get foreground process group ID.
624 /*#define HAS_TCGETPGRP / **/
627 * This symbol, if defined, indicates that the tcsetpgrp routine is
628 * available to set foreground process group ID.
630 /*#define HAS_TCSETPGRP / **/
633 * This symbol, if defined, indicates that the truncate routine is
634 * available to truncate files.
636 /*#define HAS_TRUNCATE / **/
639 * This symbol, if defined, indicates that the tzname[] array is
640 * available to access timezone names.
642 /*#define HAS_TZNAME / **/
645 * This symbol, if defined, indicates that the umask routine is
646 * available to set and get the value of the file creation mask.
648 /*#define HAS_UMASK / **/
651 * This symbol, if defined, indicates that this C compiler knows about
652 * the volatile declaration.
654 /*#define HASVOLATILE / **/
660 * This symbol, if defined, indicates that wait4() exists.
662 /*#define HAS_WAIT4 / **/
665 * This symbol, if defined, indicates that the waitpid routine is
666 * available to wait for child process.
668 /*#define HAS_WAITPID / **/
671 * This symbol, if defined, indicates that the wcstombs routine is
672 * available to convert wide character strings to multibyte strings.
674 /*#define HAS_WCSTOMBS / **/
677 * This symbol, if defined, indicates that the wctomb routine is available
678 * to covert a wide character to a multibyte.
680 /*#define HAS_WCTOMB / **/
683 * This symbol, if defined, indicates to the C program that it should
684 * include <arpa/inet.h> to get inet_addr and friends declarations.
686 /*#define I_ARPA_INET / **/
689 * This symbol, if defined, indicates that <dbm.h> exists and should
693 * This symbol, if defined, indicates that <rpcsvc/dbm.h> exists and
694 * should be included.
696 /*#define I_DBM / **/
697 /*#define I_RPCSVC_DBM / **/
700 * This symbol, if defined, indicates to the C program that it should
701 * include <dirent.h>. Using this symbol also triggers the definition
702 * of the Direntry_t define which ends up being 'struct dirent' or
703 * 'struct direct' depending on the availability of <dirent.h>.
706 * This symbol, if defined, indicates to the C program that the length
707 * of directory entry names is provided by a d_namlen field. Otherwise
708 * you need to do strlen() on the d_name field.
711 * This symbol is set to 'struct direct' or 'struct dirent' depending on
712 * whether dirent is available or not. You should use this pseudo type to
713 * portably declare your directory entries.
715 /*#define I_DIRENT / **/
716 /*#define DIRNAMLEN / **/
717 #define Direntry_t struct dirent
720 * This symbol, if defined, indicates that <dlfcn.h> exists and should
723 /*#define I_DLFCN / **/
726 * This manifest constant tells the C program to include <fcntl.h>.
728 /*#define I_FCNTL / **/
731 * This symbol, if defined, indicates to the C program that it should
732 * include <float.h> to get definition of symbols like DBL_MAX or
733 * DBL_MIN, i.e. machine dependent floating point values.
735 /*#define I_FLOAT / **/
738 * This symbol, if defined, indicates to the C program that it should
739 * include <limits.h> to get definition of symbols like WORD_BIT or
740 * LONG_MAX, i.e. machine dependant limitations.
742 /*#define I_LIMITS / **/
745 * This symbol, if defined, indicates to the C program that it should
746 * include <locale.h>.
748 /*#define I_LOCALE / **/
751 * This symbol, if defined, indicates to the C program that it should
757 * This symbol, if defined, indicates to the C program that it should
758 * include <memory.h>.
760 /*#define I_MEMORY / **/
763 * This symbol, if defined, indicates that <ndbm.h> exists and should
766 /*#define I_NDBM / **/
769 * This symbol, if defined, indicates that <net/errno.h> exists and
770 * should be included.
772 /*#define I_NET_ERRNO / **/
775 * This symbol, if defined, indicates to the C program that it should
776 * include <netinet/in.h>. Otherwise, you may try <sys/in.h>.
778 /*#define I_NETINET_IN / **/
781 * This symbol, if defined, indicates to the C program that it should
784 /*#define I_SFIO / **/
787 * This symbol, if defined, indicates that <stddef.h> exists and should
790 /*#define I_STDDEF / **/
793 * This symbol, if defined, indicates that <stdlib.h> exists and should
796 /*#define I_STDLIB / **/
799 * This symbol, if defined, indicates to the C program that it should
800 * include <string.h> (USG systems) instead of <strings.h> (BSD systems).
802 #define I_STRING /**/
805 * This symbol, if defined, indicates to the C program that it should
806 * include <sys/dir.h>.
808 /*#define I_SYS_DIR / **/
811 * This symbol, if defined, indicates to the C program that it should
812 * include <sys/file.h> to get definition of R_OK and friends.
814 /*#define I_SYS_FILE / **/
817 * This symbol, if defined, indicates that <sys/ioctl.h> exists and should
818 * be included. Otherwise, include <sgtty.h> or <termio.h>.
820 /*#define I_SYS_IOCTL / **/
823 * This symbol, if defined, indicates to the C program that it should
824 * include <sys/ndir.h>.
826 /*#define I_SYS_NDIR / **/
829 * This symbol, if defined, indicates to the C program that it should
830 * include <sys/param.h>.
832 /*#define I_SYS_PARAM / **/
835 * This symbol, if defined, indicates to the C program that it should
836 * include <sys/resource.h>.
838 /*#define I_SYS_RESOURCE / **/
841 * This symbol, if defined, indicates to the C program that it should
842 * include <sys/select.h> in order to get definition of struct timeval.
844 /*#define I_SYS_SELECT / **/
847 * This symbol, if defined, indicates to the C program that it should
848 * include <sys/stat.h>.
850 #define I_SYS_STAT /**/
853 * This symbol, if defined, indicates to the C program that it should
854 * include <sys/times.h>.
856 /*#define I_SYS_TIMES / **/
859 * This symbol, if defined, indicates to the C program that it should
860 * include <sys/types.h>.
862 /*#define I_SYS_TYPES / **/
865 * This symbol, if defined, indicates to the C program that it should
866 * include <sys/un.h> to get UNIX domain socket definitions.
868 /*#define I_SYS_UN / **/
871 * This symbol, if defined, indicates to the C program that it should
872 * include <sys/wait.h>.
874 /*#define I_SYS_WAIT / **/
877 * This symbol, if defined, indicates that the program should include
878 * <termio.h> rather than <sgtty.h>. There are also differences in
879 * the ioctl() calls that depend on the value of this symbol.
882 * This symbol, if defined, indicates that the program should include
883 * the POSIX termios.h rather than sgtty.h or termio.h.
884 * There are also differences in the ioctl() calls that depend on the
885 * value of this symbol.
888 * This symbol, if defined, indicates that the program should include
889 * <sgtty.h> rather than <termio.h>. There are also differences in
890 * the ioctl() calls that depend on the value of this symbol.
892 /*#define I_TERMIO / **/
893 /*#define I_TERMIOS / **/
894 /*#define I_SGTTY / **/
897 * This symbol, if defined, indicates to the C program that it should
898 * include <unistd.h>.
900 /*#define I_UNISTD / **/
903 * This symbol, if defined, indicates to the C program that it should
906 /*#define I_UTIME / **/
909 * This symbol, if defined, indicates to the C program that it should
910 * include <values.h> to get definition of symbols like MINFLOAT or
911 * MAXLONG, i.e. machine dependant limitations. Probably, you
912 * should use <limits.h> instead, if it is available.
914 /*#define I_VALUES / **/
917 * This symbol, if defined, indicates that <stdarg.h> exists and should
921 * This symbol, if defined, indicates to the C program that it should
922 * include <varargs.h>.
924 #define I_STDARG /**/
925 /*#define I_VARARGS / **/
928 * This symbol, if defined, indicates to the C program that it should
931 /*#define I_VFORK / **/
934 * If defined, this macro indicates that the C compiler can handle
935 * function prototypes.
938 * This macro is used to declare function parameters for folks who want
939 * to make declarations with prototypes using a different style than
940 * the above macros. Use double parentheses. For example:
942 * int main _((int argc, char *argv[]));
944 /*#define CAN_PROTOTYPE / **/
952 * This symbol contains the full pathname to the shell used on this
953 * on this system to execute Bourne shell scripts. Usually, this will be
954 * /bin/sh, though it's possible that some systems will have /bin/ksh,
955 * /bin/pdksh, /bin/ash, /bin/bash, or even something such as
958 #define SH_PATH "" /**/
961 * This symbol is defined to be the type of char used in stdio.h.
962 * It has the values "unsigned char" or "char".
964 #define STDCHAR char /**/
967 * This symbol, if defined, signifies that we our
968 * build process is a cross-compilation.
970 /*#define CROSSCOMPILE / **/
973 * This symbol contains the value of sizeof(int) so that the C
974 * preprocessor can make decisions based on it.
977 * This symbol contains the value of sizeof(long) so that the C
978 * preprocessor can make decisions based on it.
981 * This symbol contains the value of sizeof(short) so that the C
982 * preprocessor can make decisions based on it.
984 #define INTSIZE 1 /**/
985 #define LONGSIZE 1 /**/
986 #define SHORTSIZE 1 /**/
989 * This symbol, if defined, signifies that the build
990 * process will produce some binary files that are going to be
991 * used in a cross-platform environment. This is the case for
992 * example with the NeXT "fat" binaries that contain executables
995 /*#define MULTIARCH / **/
998 * This symbol, if defined, tells that there's a 64-bit integer type,
999 * Quad_t, and its unsigned counterpar, Uquad_t. QUADKIND will be one
1000 * of QUAD_IS_INT, QUAD_IS_LONG, QUAD_IS_LONG_LONG, or QUAD_IS_INT64_T.
1002 /*#define HAS_QUAD / **/
1004 # define Quad_t int64_t /**/
1005 # define Uquad_t uint64_t /**/
1006 # define QUADKIND 4 /**/
1007 # define QUAD_IS_INT 1
1008 # define QUAD_IS_LONG 2
1009 # define QUAD_IS_LONG_LONG 3
1010 # define QUAD_IS_INT64_T 4
1014 * This symbol, if defined, indicates that the accessx routine is
1015 * available to do extended access checks.
1017 /*#define HAS_ACCESSX / **/
1020 * This symbol, if defined, indicates that the eaccess routine is
1021 * available to do extended access checks.
1023 /*#define HAS_EACCESS / **/
1026 * This symbol, if defined, indicates to the C program that it should
1027 * include <sys/access.h>.
1029 /*#define I_SYS_ACCESS / **/
1032 * This symbol, if defined, indicates to the C program that it should
1033 * include <sys/security.h>.
1035 /*#define I_SYS_SECURITY / **/
1038 * This symbol contains the name of the operating system, as determined
1039 * by Configure. You shouldn't rely on it too much; the specific
1040 * feature tests from Configure are generally more reliable.
1042 #define OSNAME "unknown" /**/
1045 * This symbol contains the number of bytes required to align a
1046 * double, or a long double when applicable. Usual values are 2,
1047 * 4 and 8. The default is eight, for safety.
1049 #if defined(CROSSCOMPILE) || defined(MULTIARCH)
1050 # define MEM_ALIGNBYTES 8
1052 #define MEM_ALIGNBYTES 4
1056 * This variable, if defined, holds the name of the directory in
1057 * which the user wants to put architecture-dependent public
1058 * library files for . It is most often a local directory
1059 * such as /usr/local/lib. Programs using this variable must be
1060 * prepared to deal with filename expansion. If ARCHLIB is the
1061 * same as PRIVLIB, it is not defined, since presumably the
1062 * program already searches PRIVLIB.
1065 * This symbol contains the ~name expanded version of ARCHLIB, to be used
1066 * in programs that are not prepared to deal with ~ expansion at run-time.
1068 /*#define ARCHLIB "/usr/local/lib/perl5/5.6/unknown" / **/
1069 /*#define ARCHLIB_EXP "/usr/local/lib/perl5/5.6/unknown" / **/
1072 * This symbol holds a string representing the architecture name.
1073 * It may be used to construct an architecture-dependant pathname
1074 * where library files may be held under a private library, for
1077 #define ARCHNAME "unknown" /**/
1080 * This symbol, if defined, indicates that the atolf routine is
1081 * available to convert strings into long doubles.
1083 /*#define HAS_ATOLF / **/
1086 * This symbol, if defined, indicates that the atoll routine is
1087 * available to convert strings into long longs.
1089 /*#define HAS_ATOLL / **/
1092 * This symbol holds the path of the bin directory where the package will
1093 * be installed. Program must be prepared to deal with ~name substitution.
1096 * This symbol is the filename expanded version of the BIN symbol, for
1097 * programs that do not want to deal with that at run-time.
1099 #define BIN "/usr/local/bin" /**/
1100 #define BIN_EXP "" /**/
1102 /* PERL_BINCOMPAT_5005:
1103 * This symbol, if defined, indicates that this version of Perl should be
1104 * binary-compatible with Perl 5.005. This is impossible for builds
1105 * that use features like threads and multiplicity it is always
1106 * for those versions.
1108 /*#define PERL_BINCOMPAT_5005 / **/
1111 * This symbol holds the hexadecimal constant defined in byteorder,
1112 * i.e. 0x1234 or 0x4321, etc...
1113 * If the compiler supports cross-compiling or multiple-architecture
1114 * binaries (eg. on NeXT systems), use compiler-defined macros to
1115 * determine the byte order.
1116 * On NeXT 3.2 (and greater), you can build "Fat" Multiple Architecture
1117 * Binaries (MAB) on either big endian or little endian machines.
1118 * The endian-ness is available at compile-time. This only matters
1119 * for perl, where the config.h can be generated and installed on
1120 * one system, and used by a different architecture to build an
1121 * extension. Older versions of NeXT that might not have
1122 * defined either *_ENDIAN__ were all on Motorola 680x0 series,
1123 * so the default case (for NeXT) is big endian to catch them.
1124 * This might matter for NeXT 3.0.
1126 #if defined(CROSSCOMPILE) || defined(MULTIARCH)
1127 # ifdef __LITTLE_ENDIAN__
1129 # define BYTEORDER 0x1234
1132 # define BYTEORDER 0x12345678
1136 # ifdef __BIG_ENDIAN__
1138 # define BYTEORDER 0x4321
1141 # define BYTEORDER 0x87654321
1146 # if !defined(BYTEORDER) && (defined(NeXT) || defined(__NeXT__))
1147 # define BYTEORDER 0x4321
1150 #define BYTEORDER 0x12 /* large digits for MSB */
1154 * This macro catenates 2 tokens together.
1157 * This macro surrounds its token with double quotes.
1160 #define CAT2(a,b) a/**/b
1161 #define STRINGIFY(a) "a"
1162 /* If you can get stringification with catify, tell me how! */
1165 #define PeRl_CaTiFy(a, b) a ## b
1166 #define PeRl_StGiFy(a) #a
1167 /* the additional level of indirection enables these macros to be
1168 * used as arguments to other macros. See K&R 2nd ed., page 231. */
1169 #define CAT2(a,b) PeRl_CaTiFy(a,b)
1170 #define StGiFy(a) PeRl_StGiFy(a)
1171 #define STRINGIFY(a) PeRl_StGiFy(a)
1173 #if 42 != 1 && 42 != 42
1174 # include "Bletch: How does this C preprocessor catenate tokens?"
1178 * This symbol contains the first part of the string which will invoke
1179 * the C preprocessor on the standard input and produce to standard
1180 * output. Typical value of "cc -E" or "/lib/cpp", but it can also
1181 * call a wrapper. See CPPRUN.
1184 * This symbol contains the second part of the string which will invoke
1185 * the C preprocessor on the standard input and produce to standard
1186 * output. This symbol will have the value "-" if CPPSTDIN needs a minus
1187 * to specify standard input, otherwise the value is "".
1190 * This symbol contains the string which will invoke a C preprocessor on
1191 * the standard input and produce to standard output. It needs to end
1192 * with CPPLAST, after all other preprocessor flags have been specified.
1193 * The main difference with CPPSTDIN is that this program will never be a
1194 * pointer to a shell wrapper, i.e. it will be empty if no preprocessor is
1195 * available directly to the user. Note that it may well be different from
1196 * the preprocessor used to compile the C program.
1199 * This symbol is intended to be used along with CPPRUN in the same manner
1200 * symbol CPPMINUS is used with CPPSTDIN. It contains either "-" or "".
1208 * This manifest constant lets the C program know that the access()
1209 * system call is available to check for accessibility using real UID/GID.
1210 * (always present on UNIX.)
1212 /*#define HAS_ACCESS / **/
1215 * This symbol is defined if the C compiler can cast negative
1216 * or large floating point numbers to 32-bit ints.
1218 /*#define CASTI32 / **/
1221 * This symbol is defined if the C compiler can cast negative
1222 * numbers to unsigned longs, ints and shorts.
1225 * This symbol contains flags that say what difficulties the compiler
1226 * has casting odd floating values to unsigned long:
1228 * 1 = couldn't cast < 0
1229 * 2 = couldn't cast >= 0x80000000
1230 * 4 = couldn't cast in argument expression list
1232 /*#define CASTNEGFLOAT / **/
1233 #define CASTFLAGS 0 /**/
1236 * This symbol, if defined, indicates that the closedir() routine
1237 * does not return a value.
1239 /*#define VOID_CLOSEDIR / **/
1242 * This symbol, if defined, indicates that the C-shell exists.
1245 * This symbol, if defined, contains the full pathname of csh.
1247 /*#define HAS_CSH / **/
1252 /* DLSYM_NEEDS_UNDERSCORE:
1253 * This symbol, if defined, indicates that we need to prepend an
1254 * underscore to the symbol name before calling dlsym(). This only
1255 * makes sense if you *have* dlsym, which we will presume is the
1256 * case if you're using dl_dlopen.xs.
1258 /*#define DLSYM_NEEDS_UNDERSCORE / **/
1260 /* HAS_DRAND48_PROTO:
1261 * This symbol, if defined, indicates that the system provides
1262 * a prototype for the drand48() function. Otherwise, it is up
1263 * to the program to supply one. A good guess is
1264 * extern double drand48 _((void));
1266 /*#define HAS_DRAND48_PROTO / **/
1269 * This symbol, if defined, indicates that the getgrent routine is
1270 * available for finalizing sequential access of the group database.
1272 /*#define HAS_ENDGRENT / **/
1275 * This symbol, if defined, indicates that the endhostent() routine is
1276 * available to close whatever was being used for host queries.
1278 /*#define HAS_ENDHOSTENT / **/
1281 * This symbol, if defined, indicates that the endnetent() routine is
1282 * available to close whatever was being used for network queries.
1284 /*#define HAS_ENDNETENT / **/
1287 * This symbol, if defined, indicates that the endprotoent() routine is
1288 * available to close whatever was being used for protocol queries.
1290 /*#define HAS_ENDPROTOENT / **/
1293 * This symbol, if defined, indicates that the getgrent routine is
1294 * available for finalizing sequential access of the passwd database.
1296 /*#define HAS_ENDPWENT / **/
1299 * This symbol, if defined, indicates that the endservent() routine is
1300 * available to close whatever was being used for service queries.
1302 /*#define HAS_ENDSERVENT / **/
1305 * This symbol, when defined, indicates presence of the fd_set typedef
1308 /*#define HAS_FD_SET / **/
1311 * This symbol, if defined, indicates that the system supports filenames
1312 * longer than 14 characters.
1314 /*#define FLEXFILENAMES / **/
1317 * This symbol will be defined if the C compiler supports fpos64_t.
1319 /*#define HAS_FPOS64_T / **/
1322 * This symbol, if defined, indicates that the frexpl routine is
1323 * available to break a long double floating-point number into
1324 * a normalized fraction and an integral power of 2.
1326 /*#define HAS_FREXPL / **/
1328 /* HAS_STRUCT_FS_DATA:
1329 * This symbol, if defined, indicates that the struct fs_data
1330 * to do statfs() is supported.
1332 /*#define HAS_STRUCT_FS_DATA / **/
1335 * This symbol, if defined, indicates that the fseeko routine is
1336 * available to fseek beyond 32 bits (useful for ILP32 hosts).
1338 /*#define HAS_FSEEKO / **/
1341 * This symbol, if defined, indicates that the fstatfs routine is
1342 * available to stat filesystems by file descriptors.
1344 /*#define HAS_FSTATFS / **/
1347 * This symbol, if defined, indicates that the ftello routine is
1348 * available to ftell beyond 32 bits (useful for ILP32 hosts).
1350 /*#define HAS_FTELLO / **/
1353 * This preprocessor macro is defined to convert a floating point
1354 * number to a string without a trailing decimal point. This
1355 * emulates the behavior of sprintf("%g"), but is sometimes much more
1356 * efficient. If gconvert() is not available, but gcvt() drops the
1357 * trailing decimal point, then gcvt() is used. If all else fails,
1358 * a macro using sprintf("%g") is used. Arguments for the Gconvert
1359 * macro are: value, number of digits, whether trailing zeros should
1360 * be retained, and the output buffer.
1361 * Possible values are:
1362 * d_Gconvert='gconvert((x),(n),(t),(b))'
1363 * d_Gconvert='gcvt((x),(n),(b))'
1364 * d_Gconvert='sprintf((b),"%.*g",(n),(x))'
1365 * The last two assume trailing zeros should not be kept.
1367 #define Gconvert(x,n,t,b) sprintf((b),"%.*g",(n),(x))
1370 * This symbol, if defined, indicates that the getcwd routine is
1371 * available to get the current working directory.
1373 /*#define HAS_GETCWD / **/
1376 * This symbol, if defined, indicates that the getespwnam system call is
1377 * available to retrieve enchanced (shadow) password entries by name.
1379 /*#define HAS_GETESPWNAM / **/
1382 * This symbol, if defined, indicates that the getfsstat routine is
1383 * available to stat filesystems in bulk.
1385 /*#define HAS_GETFSSTAT / **/
1388 * This symbol, if defined, indicates that the getgrent routine is
1389 * available for sequential access of the group database.
1391 /*#define HAS_GETGRENT / **/
1393 /* HAS_GETHOSTBYADDR:
1394 * This symbol, if defined, indicates that the gethostbyaddr() routine is
1395 * available to look up hosts by their IP addresses.
1397 /*#define HAS_GETHOSTBYADDR / **/
1399 /* HAS_GETHOSTBYNAME:
1400 * This symbol, if defined, indicates that the gethostbyname() routine is
1401 * available to look up host names in some data base or other.
1403 /*#define HAS_GETHOSTBYNAME / **/
1406 * This symbol, if defined, indicates that the gethostent() routine is
1407 * available to look up host names in some data base or another.
1409 /*#define HAS_GETHOSTENT / **/
1412 * This symbol, if defined, indicates that the C program may use the
1413 * gethostname() routine to derive the host name. See also HAS_UNAME
1417 * This symbol, if defined, indicates that the C program may use the
1418 * uname() routine to derive the host name. See also HAS_GETHOSTNAME
1422 * This symbol, if defined, indicates the command to feed to the
1423 * popen() routine to derive the host name. See also HAS_GETHOSTNAME
1424 * and HAS_UNAME. Note that the command uses a fully qualified path,
1425 * so that it is safe even if used by a process with super-user
1429 * This symbol, if defined, indicates that the C program may use the
1430 * contents of PHOSTNAME as a command to feed to the popen() routine
1431 * to derive the host name.
1433 /*#define HAS_GETHOSTNAME / **/
1434 /*#define HAS_UNAME / **/
1435 /*#define HAS_PHOSTNAME / **/
1436 #ifdef HAS_PHOSTNAME
1437 #define PHOSTNAME "" /* How to get the host name */
1440 /* HAS_GETHOST_PROTOS:
1441 * This symbol, if defined, indicates that <netdb.h> includes
1442 * prototypes for gethostent(), gethostbyname(), and
1443 * gethostbyaddr(). Otherwise, it is up to the program to guess
1444 * them. See netdbtype.U for probing for various Netdb_xxx_t types.
1446 /*#define HAS_GETHOST_PROTOS / **/
1449 * This symbol, if defined, indicates that the getmnt routine is
1450 * available to get filesystem mount info by filename.
1452 /*#define HAS_GETMNT / **/
1455 * This symbol, if defined, indicates that the getmntent routine is
1456 * available to iterate through mounted file systems to get their info.
1458 /*#define HAS_GETMNTENT / **/
1460 /* HAS_GETNETBYADDR:
1461 * This symbol, if defined, indicates that the getnetbyaddr() routine is
1462 * available to look up networks by their IP addresses.
1464 /*#define HAS_GETNETBYADDR / **/
1466 /* HAS_GETNETBYNAME:
1467 * This symbol, if defined, indicates that the getnetbyname() routine is
1468 * available to look up networks by their names.
1470 /*#define HAS_GETNETBYNAME / **/
1473 * This symbol, if defined, indicates that the getnetent() routine is
1474 * available to look up network names in some data base or another.
1476 /*#define HAS_GETNETENT / **/
1478 /* HAS_GETNET_PROTOS:
1479 * This symbol, if defined, indicates that <netdb.h> includes
1480 * prototypes for getnetent(), getnetbyname(), and
1481 * getnetbyaddr(). Otherwise, it is up to the program to guess
1482 * them. See netdbtype.U for probing for various Netdb_xxx_t types.
1484 /*#define HAS_GETNET_PROTOS / **/
1487 * This symbol, if defined, indicates that the getprotoent() routine is
1488 * available to look up protocols in some data base or another.
1490 /*#define HAS_GETPROTOENT / **/
1492 /* HAS_GETPROTOBYNAME:
1493 * This symbol, if defined, indicates that the getprotobyname()
1494 * routine is available to look up protocols by their name.
1496 /* HAS_GETPROTOBYNUMBER:
1497 * This symbol, if defined, indicates that the getprotobynumber()
1498 * routine is available to look up protocols by their number.
1500 /*#define HAS_GETPROTOBYNAME / **/
1501 /*#define HAS_GETPROTOBYNUMBER / **/
1503 /* HAS_GETPROTO_PROTOS:
1504 * This symbol, if defined, indicates that <netdb.h> includes
1505 * prototypes for getprotoent(), getprotobyname(), and
1506 * getprotobyaddr(). Otherwise, it is up to the program to guess
1507 * them. See netdbtype.U for probing for various Netdb_xxx_t types.
1509 /*#define HAS_GETPROTO_PROTOS / **/
1512 * This symbol, if defined, indicates that the getprpwnam system call is
1513 * available to retrieve protected (shadow) password entries by name.
1515 /*#define HAS_GETPRPWNAM / **/
1518 * This symbol, if defined, indicates that the getpwent routine is
1519 * available for sequential access of the passwd database.
1520 * If this is not available, the older getpw() function may be available.
1522 /*#define HAS_GETPWENT / **/
1525 * This symbol, if defined, indicates that the getservent() routine is
1526 * available to look up network services in some data base or another.
1528 /*#define HAS_GETSERVENT / **/
1530 /* HAS_GETSERV_PROTOS:
1531 * This symbol, if defined, indicates that <netdb.h> includes
1532 * prototypes for getservent(), getservbyname(), and
1533 * getservbyaddr(). Otherwise, it is up to the program to guess
1534 * them. See netdbtype.U for probing for various Netdb_xxx_t types.
1536 /*#define HAS_GETSERV_PROTOS / **/
1539 * This symbol, if defined, indicates that the getspnam system call is
1540 * available to retrieve SysV shadow password entries by name.
1542 /*#define HAS_GETSPNAM / **/
1544 /* HAS_GETSERVBYNAME:
1545 * This symbol, if defined, indicates that the getservbyname()
1546 * routine is available to look up services by their name.
1548 /* HAS_GETSERVBYPORT:
1549 * This symbol, if defined, indicates that the getservbyport()
1550 * routine is available to look up services by their port.
1552 /*#define HAS_GETSERVBYNAME / **/
1553 /*#define HAS_GETSERVBYPORT / **/
1556 * This symbol, if defined, indicates to the C program that
1557 * the GNU C library is being used.
1559 /*#define HAS_GNULIBC / **/
1560 #if defined(HAS_GNULIBC) && !defined(_GNU_SOURCE)
1561 # define _GNU_SOURCE
1564 * This symbol, if defined, indicates that the hasmntopt routine is
1565 * available to query the mount options of file systems.
1567 /*#define HAS_HASMNTOPT / **/
1570 * This symbol, if defined, indicates that the htonl() routine (and
1571 * friends htons() ntohl() ntohs()) are available to do network
1572 * order byte swapping.
1575 * This symbol, if defined, indicates that the htons() routine (and
1576 * friends htonl() ntohl() ntohs()) are available to do network
1577 * order byte swapping.
1580 * This symbol, if defined, indicates that the ntohl() routine (and
1581 * friends htonl() htons() ntohs()) are available to do network
1582 * order byte swapping.
1585 * This symbol, if defined, indicates that the ntohs() routine (and
1586 * friends htonl() htons() ntohl()) are available to do network
1587 * order byte swapping.
1589 /*#define HAS_HTONL / **/
1590 /*#define HAS_HTONS / **/
1591 /*#define HAS_NTOHL / **/
1592 /*#define HAS_NTOHS / **/
1595 * This symbol, if defined, indicates that the iconv routine is
1596 * available to do character set conversions.
1598 /*#define HAS_ICONV / **/
1601 * This symbol will defined if the C compiler supports int64_t.
1602 * Usually the <inttypes.h> needs to be included, but sometimes
1603 * <sys/types.h> is enough.
1605 /*#define HAS_INT64_T / **/
1608 * This manifest constant lets the C program know that isascii
1611 /*#define HAS_ISASCII / **/
1614 * This symbol, if defined, indicates that the isnan routine is
1615 * available to check whether a double is a NaN.
1617 /*#define HAS_ISNAN / **/
1620 * This symbol, if defined, indicates that the isnanl routine is
1621 * available to check whether a long double is a NaN.
1623 /*#define HAS_ISNANL / **/
1626 * This symbol, if defined, indicates that the lchown routine is
1627 * available to operate on a symbolic link (instead of following the
1630 /*#define HAS_LCHOWN / **/
1633 * This symbol, if defined, indicates that this system's <float.h>
1634 * or <limits.h> defines the symbol LDBL_DIG, which is the number
1635 * of significant digits in a long double precision number. Unlike
1636 * for DBL_DIG, there's no good guess for LDBL_DIG if it is undefined.
1638 /*#define HAS_LDBL_DIG / * */
1641 * This symbol will be defined if the C compiler supports long
1645 * This symbol contains the size of a long double, so that the
1646 * C preprocessor can make decisions based on it. It is only
1647 * defined if the system supports long doubles.
1649 /*#define HAS_LONG_DOUBLE / **/
1650 #ifdef HAS_LONG_DOUBLE
1651 #define LONG_DOUBLESIZE 1 /**/
1655 * This symbol will be defined if the C compiler supports long long.
1658 * This symbol contains the size of a long long, so that the
1659 * C preprocessor can make decisions based on it. It is only
1660 * defined if the system supports long long.
1662 /*#define HAS_LONG_LONG / **/
1663 #ifdef HAS_LONG_LONG
1664 #define LONGLONGSIZE 1 /**/
1668 * This symbol, if defined, indicates that the system provides
1669 * a prototype for the lseek() function. Otherwise, it is up
1670 * to the program to supply one. A good guess is
1671 * extern off_t lseek(int, off_t, int);
1673 /*#define HAS_LSEEK_PROTO / **/
1676 * This symbol, if defined, indicates that the madvise system call is
1677 * available to map a file into memory.
1679 /*#define HAS_MADVISE / **/
1682 * This symbol, if defined, indicates that the memchr routine is available
1683 * to locate characters within a C string.
1685 /*#define HAS_MEMCHR / **/
1688 * This symbol, if defined, indicates that the mkdtemp routine is
1689 * available to exclusively create a uniquely named temporary directory.
1691 /*#define HAS_MKDTEMP / **/
1694 * This symbol, if defined, indicates that the mkstemp routine is
1695 * available to exclusively create and open a uniquely named
1698 /*#define HAS_MKSTEMP / **/
1701 * This symbol, if defined, indicates that the mkstemps routine is
1702 * available to excluslvely create and open a uniquely named
1703 * (with a suffix) temporary file.
1705 /*#define HAS_MKSTEMPS / **/
1708 * This symbol, if defined, indicates that the mmap system call is
1709 * available to map a file into memory.
1712 * This symbol holds the return type of the mmap() system call
1713 * (and simultaneously the type of the first argument).
1714 * Usually set to 'void *' or 'cadd_t'.
1716 /*#define HAS_MMAP / **/
1720 * This symbol, if defined, indicates that the modfl routine is
1721 * available to split a long double x into a fractional part f and
1722 * an integer part i such that |f| < 1.0 and (f + i) = x.
1724 /*#define HAS_MODFL / **/
1727 * This symbol, if defined, indicates that the mprotect system call is
1728 * available to modify the access protection of a memory mapped file.
1730 /*#define HAS_MPROTECT / **/
1733 * This symbol, if defined, indicates that the entire msg*(2) library is
1734 * supported (IPC mechanism based on message queues).
1736 /*#define HAS_MSG / **/
1739 * This symbol will be defined if the C compiler supports off64_t.
1741 /*#define HAS_OFF64_T / **/
1744 * This manifest constant lets the C program know that the three
1745 * argument form of open(2) is available.
1747 /*#define HAS_OPEN3 / **/
1749 /* OLD_PTHREAD_CREATE_JOINABLE:
1750 * This symbol, if defined, indicates how to create pthread
1751 * in joinable (aka undetached) state. NOTE: not defined
1752 * if pthread.h already has defined PTHREAD_CREATE_JOINABLE
1753 * (the new version of the constant).
1754 * If defined, known values are PTHREAD_CREATE_UNDETACHED
1757 /*#define OLD_PTHREAD_CREATE_JOINABLE / **/
1759 /* HAS_PTHREAD_YIELD:
1760 * This symbol, if defined, indicates that the pthread_yield
1761 * routine is available to yield the execution of the current
1762 * thread. sched_yield is preferable to pthread_yield.
1765 * This symbol defines the way to yield the execution of
1766 * the current thread. Known ways are sched_yield,
1767 * pthread_yield, and pthread_yield with NULL.
1770 * This symbol, if defined, indicates that the sched_yield
1771 * routine is available to yield the execution of the current
1772 * thread. sched_yield is preferable to pthread_yield.
1774 /*#define HAS_PTHREAD_YIELD / **/
1775 #define SCHED_YIELD sched_yield() /**/
1776 /*#define HAS_SCHED_YIELD / **/
1779 * This symbol, if defined, indicates that the bcopy routine is available
1780 * to copy potentially overlapping memory blocks. Otherwise you should
1781 * probably use memmove() or memcpy(). If neither is defined, roll your
1784 /*#define HAS_SAFE_BCOPY / **/
1787 * This symbol, if defined, indicates that the memcpy routine is available
1788 * to copy potentially overlapping memory blocks. Otherwise you should
1789 * probably use memmove() or memcpy(). If neither is defined, roll your
1792 /*#define HAS_SAFE_MEMCPY / **/
1795 * This symbol, if defined, indicates that the memcmp routine is available
1796 * and can be used to compare relative magnitudes of chars with their high
1797 * bits set. If it is not defined, roll your own version.
1799 /*#define HAS_SANE_MEMCMP / **/
1802 * This symbol, if defined, indicates that the entire sem*(2) library is
1805 /*#define HAS_SEM / **/
1808 * This symbol, if defined, indicates that the setgrent routine is
1809 * available for initializing sequential access of the group database.
1811 /*#define HAS_SETGRENT / **/
1814 * This symbol, if defined, indicates that the setgroups() routine is
1815 * available to set the list of process groups. If unavailable, multiple
1816 * groups are probably not supported.
1818 /*#define HAS_SETGROUPS / **/
1821 * This symbol, if defined, indicates that the sethostent() routine is
1824 /*#define HAS_SETHOSTENT / **/
1827 * This symbol, if defined, indicates that the setnetent() routine is
1830 /*#define HAS_SETNETENT / **/
1833 * This symbol, if defined, indicates that the setprotoent() routine is
1836 /*#define HAS_SETPROTOENT / **/
1838 /* HAS_SETPROCTITLE:
1839 * This symbol, if defined, indicates that the setproctitle routine is
1840 * available to set process title.
1842 /*#define HAS_SETPROCTITLE / **/
1845 * This symbol, if defined, indicates that the setpwent routine is
1846 * available for initializing sequential access of the passwd database.
1848 /*#define HAS_SETPWENT / **/
1851 * This symbol, if defined, indicates that the setservent() routine is
1854 /*#define HAS_SETSERVENT / **/
1857 * This symbol, if defined, indicates that the setvbuf routine is
1858 * available to change buffering on an open stdio stream.
1859 * to a line-buffered mode.
1861 /*#define HAS_SETVBUF / **/
1864 * This symbol, if defined, indicates that sfio should
1867 /*#define USE_SFIO / **/
1870 * This symbol, if defined, indicates that the entire shm*(2) library is
1873 /*#define HAS_SHM / **/
1876 * This symbol, if defined, indicates that Vr4's sigaction() routine
1879 /*#define HAS_SIGACTION / **/
1882 * This variable indicates to the C program that the sigsetjmp()
1883 * routine is available to save the calling process's registers
1884 * and stack environment for later use by siglongjmp(), and
1885 * to optionally save the process's signal mask. See
1886 * Sigjmp_buf, Sigsetjmp, and Siglongjmp.
1889 * This is the buffer type to be used with Sigsetjmp and Siglongjmp.
1892 * This macro is used in the same way as sigsetjmp(), but will invoke
1893 * traditional setjmp() if sigsetjmp isn't available.
1894 * See HAS_SIGSETJMP.
1897 * This macro is used in the same way as siglongjmp(), but will invoke
1898 * traditional longjmp() if siglongjmp isn't available.
1899 * See HAS_SIGSETJMP.
1901 /*#define HAS_SIGSETJMP / **/
1902 #ifdef HAS_SIGSETJMP
1903 #define Sigjmp_buf sigjmp_buf
1904 #define Sigsetjmp(buf,save_mask) sigsetjmp((buf),(save_mask))
1905 #define Siglongjmp(buf,retval) siglongjmp((buf),(retval))
1907 #define Sigjmp_buf jmp_buf
1908 #define Sigsetjmp(buf,save_mask) setjmp((buf))
1909 #define Siglongjmp(buf,retval) longjmp((buf),(retval))
1913 * This symbol, if defined, indicates that the BSD socket interface is
1917 * This symbol, if defined, indicates that the BSD socketpair() call is
1921 * This symbol, if defined, indicates that the MSG_CTRUNC is supported.
1922 * Checking just with #ifdef might not be enough because this symbol
1923 * has been known to be an enum.
1925 /* HAS_MSG_DONTROUTE:
1926 * This symbol, if defined, indicates that the MSG_DONTROUTE is supported.
1927 * Checking just with #ifdef might not be enough because this symbol
1928 * has been known to be an enum.
1931 * This symbol, if defined, indicates that the MSG_OOB is supported.
1932 * Checking just with #ifdef might not be enough because this symbol
1933 * has been known to be an enum.
1936 * This symbol, if defined, indicates that the MSG_PEEK is supported.
1937 * Checking just with #ifdef might not be enough because this symbol
1938 * has been known to be an enum.
1941 * This symbol, if defined, indicates that the MSG_PROXY is supported.
1942 * Checking just with #ifdef might not be enough because this symbol
1943 * has been known to be an enum.
1946 * This symbol, if defined, indicates that the SCM_RIGHTS is supported.
1947 * Checking just with #ifdef might not be enough because this symbol
1948 * has been known to be an enum.
1950 /*#define HAS_SOCKET / **/
1951 /*#define HAS_SOCKETPAIR / **/
1952 /*#define HAS_MSG_CTRUNC / **/
1953 /*#define HAS_MSG_DONTROUTE / **/
1954 /*#define HAS_MSG_OOB / **/
1955 /*#define HAS_MSG_PEEK / **/
1956 /*#define HAS_MSG_PROXY / **/
1957 /*#define HAS_SCM_RIGHTS / **/
1960 * This symbol, if defined, indicates that the socks5_init routine is
1961 * available to initialize SOCKS 5.
1963 /*#define HAS_SOCKS5_INIT / **/
1966 * This symbol, if defined, indicates that the sqrtl routine is
1967 * available to do long double square roots.
1969 /*#define HAS_SQRTL / **/
1972 * This symbol is defined if this system has a stat structure declaring
1973 * st_blksize and st_blocks.
1975 #ifndef USE_STAT_BLOCKS
1976 /*#define USE_STAT_BLOCKS / **/
1979 /* HAS_STRUCT_STATFS_F_FLAGS:
1980 * This symbol, if defined, indicates that the struct statfs
1981 * does have the f_flags member containing the mount flags of
1982 * the filesystem containing the file.
1983 * This kind of struct statfs is coming from <sys/mount.h> (BSD 4.3),
1984 * not from <sys/statfs.h> (SYSV). Older BSDs (like Ultrix) do not
1985 * have statfs() and struct statfs, they have ustat() and getmnt()
1986 * with struct ustat and struct fs_data.
1988 /*#define HAS_STRUCT_STATFS_F_FLAGS / **/
1990 /* HAS_STRUCT_STATFS:
1991 * This symbol, if defined, indicates that the struct statfs
1992 * to do statfs() is supported.
1994 /*#define HAS_STRUCT_STATFS / **/
1997 * This symbol, if defined, indicates that the fstatvfs routine is
1998 * available to stat filesystems by file descriptors.
2000 /*#define HAS_FSTATVFS / **/
2003 * This symbol is defined if the _ptr and _cnt fields (or similar)
2004 * of the stdio FILE structure can be used to access the stdio buffer
2005 * for a file handle. If this is defined, then the FILE_ptr(fp)
2006 * and FILE_cnt(fp) macros will also be defined and should be used
2007 * to access these fields.
2010 * This macro is used to access the _ptr field (or equivalent) of the
2011 * FILE structure pointed to by its argument. This macro will always be
2012 * defined if USE_STDIO_PTR is defined.
2014 /* STDIO_PTR_LVALUE:
2015 * This symbol is defined if the FILE_ptr macro can be used as an
2019 * This macro is used to access the _cnt field (or equivalent) of the
2020 * FILE structure pointed to by its argument. This macro will always be
2021 * defined if USE_STDIO_PTR is defined.
2023 /* STDIO_CNT_LVALUE:
2024 * This symbol is defined if the FILE_cnt macro can be used as an
2027 /* STDIO_PTR_LVAL_SETS_CNT:
2028 * This symbol is defined if using the FILE_ptr macro as an lvalue
2029 * to increase the pointer by n has the side effect of decreasing the
2030 * value of File_cnt(fp) by n.
2032 /* STDIO_PTR_LVAL_NOCHANGE_CNT:
2033 * This symbol is defined if using the FILE_ptr macro as an lvalue
2034 * to increase the pointer by n leaves File_cnt(fp) unchanged.
2036 /*#define USE_STDIO_PTR / **/
2037 #ifdef USE_STDIO_PTR
2038 #define FILE_ptr(fp) ((fp)->_IO_read_ptr)
2039 # STDIO_PTR_LVALUE /**/
2040 #define FILE_cnt(fp) ((fp)->_IO_read_end - (fp)->_IO_read_ptr)
2041 /*#define STDIO_CNT_LVALUE / **/
2042 /*#define STDIO_PTR_LVAL_SETS_CNT / **/
2043 /*#define STDIO_PTR_LVAL_NOCHANGE_CNT / **/
2047 * This symbol is defined if the _base field (or similar) of the
2048 * stdio FILE structure can be used to access the stdio buffer for
2049 * a file handle. If this is defined, then the FILE_base(fp) macro
2050 * will also be defined and should be used to access this field.
2051 * Also, the FILE_bufsiz(fp) macro will be defined and should be used
2052 * to determine the number of bytes in the buffer. USE_STDIO_BASE
2053 * will never be defined unless USE_STDIO_PTR is.
2056 * This macro is used to access the _base field (or equivalent) of the
2057 * FILE structure pointed to by its argument. This macro will always be
2058 * defined if USE_STDIO_BASE is defined.
2061 * This macro is used to determine the number of bytes in the I/O
2062 * buffer pointed to by _base field (or equivalent) of the FILE
2063 * structure pointed to its argument. This macro will always be defined
2064 * if USE_STDIO_BASE is defined.
2066 /*#define USE_STDIO_BASE / **/
2067 #ifdef USE_STDIO_BASE
2068 #define FILE_base(fp) ((fp)->_IO_read_base)
2069 #define FILE_bufsiz(fp) ((fp)->_IO_read_end - (fp)->_IO_read_base)
2073 * This symbol, if defined, indicates that the strerror routine is
2074 * available to translate error numbers to strings. See the writeup
2075 * of Strerror() in this file before you try to define your own.
2078 * This symbol, if defined, indicates that the sys_errlist array is
2079 * available to translate error numbers to strings. The extern int
2080 * sys_nerr gives the size of that table.
2083 * This preprocessor symbol is defined as a macro if strerror() is
2084 * not available to translate error numbers to strings but sys_errlist[]
2087 /*#define HAS_STRERROR / **/
2088 /*#define HAS_SYS_ERRLIST / **/
2089 #define Strerror(e) strerror(e)
2092 * This symbol, if defined, indicates that the strtold routine is
2093 * available to convert strings to long doubles.
2095 /*#define HAS_STRTOLD / **/
2098 * This symbol, if defined, indicates that the strtoll routine is
2099 * available to convert strings to long longs.
2101 /*#define HAS_STRTOLL / **/
2104 * This symbol, if defined, indicates that the strtoull routine is
2105 * available to convert strings to unsigned long longs.
2107 /*#define HAS_STRTOULL / **/
2110 * This symbol, if defined, indicates that the strtouq routine is
2111 * available to convert strings to unsigned long longs (quads).
2113 /*#define HAS_STRTOUQ / **/
2115 /* HAS_TELLDIR_PROTO:
2116 * This symbol, if defined, indicates that the system provides
2117 * a prototype for the telldir() function. Otherwise, it is up
2118 * to the program to supply one. A good guess is
2119 * extern long telldir _((DIR*));
2121 /*#define HAS_TELLDIR_PROTO / **/
2124 * This symbol holds the type returned by time(). It can be long,
2125 * or time_t on BSD sites (in which case <sys/types.h> should be
2128 #define Time_t int /* Time type */
2131 * This symbol, if defined, indicates that the times() routine exists.
2132 * Note that this became obsolete on some systems (SUNOS), which now
2133 * use getrusage(). It may be necessary to include <sys/times.h>.
2135 /*#define HAS_TIMES / **/
2138 * This symbol, if defined, indicates that the union semun is
2139 * defined by including <sys/sem.h>. If not, the user code
2140 * probably needs to define it as:
2143 * struct semid_ds *buf;
2144 * unsigned short *array;
2147 /* USE_SEMCTL_SEMUN:
2148 * This symbol, if defined, indicates that union semun is
2149 * used for semctl IPC_STAT.
2151 /* USE_SEMCTL_SEMID_DS:
2152 * This symbol, if defined, indicates that struct semid_ds * is
2153 * used for semctl IPC_STAT.
2155 /*#define HAS_UNION_SEMUN / **/
2156 /*#define USE_SEMCTL_SEMUN / **/
2157 /*#define USE_SEMCTL_SEMID_DS / **/
2160 * This symbol, if defined, indicates that the ustat system call is
2161 * available to query file system statistics by dev_t.
2163 /*#define HAS_USTAT / **/
2166 * This symbol, if defined, indicates that vfork() exists.
2168 /*#define HAS_VFORK / **/
2171 * This symbol's value is either "void" or "int", corresponding to the
2172 * appropriate return type of a signal handler. Thus, you can declare
2173 * a signal handler using "Signal_t (*handler)()", and define the
2174 * handler using "Signal_t handler(sig)".
2176 #define Signal_t int /* Signal handler's return type */
2179 * This symbol, if defined, indicates that the vprintf routine is available
2180 * to printf with a pointer to an argument list. If unavailable, you
2181 * may need to write your own, probably in terms of _doprnt().
2183 /* USE_CHAR_VSPRINTF:
2184 * This symbol is defined if this system has vsprintf() returning type
2185 * (char*). The trend seems to be to declare it as "int vsprintf()". It
2186 * is up to the package author to declare vsprintf correctly based on the
2189 #define HAS_VPRINTF /**/
2190 /*#define USE_CHAR_VSPRINTF / **/
2192 /* USE_DYNAMIC_LOADING:
2193 * This symbol, if defined, indicates that dynamic loading of
2194 * some sort is available.
2196 /*#define USE_DYNAMIC_LOADING / **/
2199 * This symbol contains the size of a double, so that the C preprocessor
2200 * can make decisions based on it.
2202 #define DOUBLESIZE 1 /**/
2205 * This symbol, if defined, indicates that this system uses
2208 /*#define EBCDIC / **/
2211 * This symbol, if defined, tells that fflush(NULL) does flush
2212 * all pending stdio output.
2215 * This symbol, if defined, tells that to flush
2216 * all pending stdio output one must loop through all
2217 * the stdio file handles stored in an array and fflush them.
2218 * Note that if fflushNULL is defined, fflushall will not
2219 * even be probed for and will be left undefined.
2221 /*#define FFLUSH_NULL / **/
2222 /*#define FFLUSH_ALL / **/
2225 * This symbol holds the type used to declare file positions in libc.
2226 * It can be fpos_t, long, uint, etc... It may be necessary to include
2227 * <sys/types.h> to get any typedef'ed information.
2229 #define Fpos_t int /* File position type */
2232 * This symbol defines the format string used for printing a Gid_t.
2234 #define Gid_t_f "lu" /**/
2237 * This symbol holds the signedess of a Gid_t.
2238 * 1 for unsigned, -1 for signed.
2240 #define Gid_t_sign 1 /* GID sign */
2243 * This symbol holds the size of a Gid_t in bytes.
2245 #define Gid_t_size 4 /* GID size */
2248 * This symbol holds the return type of getgid() and the type of
2249 * argument to setrgid() and related functions. Typically,
2250 * it is the type of group ids in the kernel. It can be int, ushort,
2251 * gid_t, etc... It may be necessary to include <sys/types.h> to get
2252 * any typedef'ed information.
2254 #define Gid_t int /* Type for getgid(), etc... */
2257 * This symbol holds the type used for the second argument to
2258 * getgroups() and setgroups(). Usually, this is the same as
2259 * gidtype (gid_t) , but sometimes it isn't.
2260 * It can be int, ushort, gid_t, etc...
2261 * It may be necessary to include <sys/types.h> to get any
2262 * typedef'ed information. This is only required if you have
2263 * getgroups() or setgroups()..
2265 #if defined(HAS_GETGROUPS) || defined(HAS_SETGROUPS)
2266 #define Groups_t int /* Type for 2nd arg to [sg]etgroups() */
2270 * This symbol contains the type of the prefix structure element
2271 * in the <db.h> header file. In older versions of DB, it was
2272 * int, while in newer ones it is u_int32_t.
2275 * This symbol contains the type of the prefix structure element
2276 * in the <db.h> header file. In older versions of DB, it was
2277 * int, while in newer ones it is size_t.
2279 #define DB_Hash_t u_int32_t /**/
2280 #define DB_Prefix_t size_t /**/
2283 * This symbol, if defined, indicates to the C program that it should
2287 * This symbol, if defined, indicates to the C program that struct group
2288 * in <grp.h> contains gr_passwd.
2290 /*#define I_GRP / **/
2291 /*#define GRPASSWD / **/
2294 * This symbol, if defined, indicates that <iconv.h> exists and
2295 * should be included.
2297 /*#define I_ICONV / **/
2300 * This symbol, if defined, indicates that <ieeefp.h> exists and
2301 * should be included.
2303 /*#define I_IEEEFP / **/
2306 * This symbol, if defined, indicates to the C program that it should
2307 * include <inttypes.h>.
2309 /*#define I_INTTYPES / **/
2312 * This symbol, if defined, indicates that <libutil.h> exists and
2313 * should be included.
2315 /*#define I_LIBUTIL / **/
2318 * This symbol, if defined, indicates to the C program that it should
2319 * include <mach/cthreads.h>.
2321 /*#define I_MACH_CTHREADS / **/
2324 * This symbol, if defined, indicates that <mntent.h> exists and
2325 * should be included.
2327 /*#define I_MNTENT / **/
2330 * This symbol, if defined, indicates that <netdb.h> exists and
2331 * should be included.
2333 /*#define I_NETDB / **/
2336 * This symbol, if defined, indicates to the C program that it should
2337 * include <netinet/tcp.h>.
2339 /*#define I_NETINET_TCP / **/
2342 * This symbol, if defined, indicates that <poll.h> exists and
2343 * should be included.
2345 /*#define I_POLL / **/
2348 * This symbol, if defined, indicates that <prot.h> exists and
2349 * should be included.
2351 /*#define I_PROT / **/
2354 * This symbol, if defined, indicates to the C program that it should
2355 * include <pthread.h>.
2357 /*#define I_PTHREAD / **/
2360 * This symbol, if defined, indicates to the C program that it should
2364 * This symbol, if defined, indicates to the C program that struct passwd
2365 * contains pw_quota.
2368 * This symbol, if defined, indicates to the C program that struct passwd
2372 * This symbol, if defined, indicates to the C program that struct passwd
2373 * contains pw_change.
2376 * This symbol, if defined, indicates to the C program that struct passwd
2377 * contains pw_class.
2380 * This symbol, if defined, indicates to the C program that struct passwd
2381 * contains pw_expire.
2384 * This symbol, if defined, indicates to the C program that struct passwd
2385 * contains pw_comment.
2388 * This symbol, if defined, indicates to the C program that struct passwd
2389 * contains pw_gecos.
2392 * This symbol, if defined, indicates to the C program that struct passwd
2393 * contains pw_passwd.
2395 /*#define I_PWD / **/
2396 /*#define PWQUOTA / **/
2397 /*#define PWAGE / **/
2398 /*#define PWCHANGE / **/
2399 /*#define PWCLASS / **/
2400 /*#define PWEXPIRE / **/
2401 /*#define PWCOMMENT / **/
2402 /*#define PWGECOS / **/
2403 /*#define PWPASSWD / **/
2406 * This symbol, if defined, indicates that <shadow.h> exists and
2407 * should be included.
2409 /*#define I_SHADOW / **/
2412 * This symbol, if defined, indicates that <socks.h> exists and
2413 * should be included.
2415 /*#define I_SOCKS / **/
2418 * This symbol, if defined, indicates that <sunmath.h> exists and
2419 * should be included.
2421 /*#define I_SUNMATH / **/
2424 * This symbol, if defined, indicates that <syslog.h> exists and
2425 * should be included.
2427 /*#define I_SYSLOG / **/
2430 * This symbol, if defined, indicates that <sys/mode.h> exists and
2431 * should be included.
2433 /*#define I_SYSMODE / **/
2436 * This symbol, if defined, indicates that <sys/mount.h> exists and
2437 * should be included.
2439 /*#define I_SYS_MOUNT / **/
2442 * This symbol, if defined, indicates that <sys/statfs.h> exists.
2444 /*#define I_SYS_STATFS / **/
2447 * This symbol, if defined, indicates that <sys/statvfs.h> exists and
2448 * should be included.
2450 /*#define I_SYS_STATVFS / **/
2453 * This symbol, if defined, indicates that <sys/uio.h> exists and
2454 * should be included.
2456 /*#define I_SYSUIO / **/
2459 * This symbol, if defined, indicates that <sys/utsname.h> exists and
2460 * should be included.
2462 /*#define I_SYSUTSNAME / **/
2465 * This symbol, if defined, indicates that <sys/vfs.h> exists and
2466 * should be included.
2468 /*#define I_SYS_VFS / **/
2471 * This symbol, if defined, indicates to the C program that it should
2475 * This symbol, if defined, indicates to the C program that it should
2476 * include <sys/time.h>.
2478 /* I_SYS_TIME_KERNEL:
2479 * This symbol, if defined, indicates to the C program that it should
2480 * include <sys/time.h> with KERNEL defined.
2483 /*#define I_SYS_TIME / **/
2484 /*#define I_SYS_TIME_KERNEL / **/
2487 * This symbol, if defined, indicates that <ustat.h> exists and
2488 * should be included.
2490 /*#define I_USTAT / **/
2492 /* PERL_INC_VERSION_LIST:
2493 * This variable specifies the list of subdirectories in over
2494 * which perl.c:incpush() and lib/lib.pm will automatically
2495 * search when adding directories to @INC, in a format suitable
2496 * for a C initialization string. See the inc_version_list entry
2497 * in Porting/Glossary for more details.
2499 #define PERL_INC_VERSION_LIST NULL /**/
2501 /* INSTALL_USR_BIN_PERL:
2502 * This symbol, if defined, indicates that Perl is to be installed
2503 * also as /usr/bin/perl.
2505 /*#define INSTALL_USR_BIN_PERL / **/
2508 * This symbol, if defined, contains the string used by stdio to
2509 * format long doubles (format 'f') for output.
2512 * This symbol, if defined, contains the string used by stdio to
2513 * format long doubles (format 'g') for output.
2516 * This symbol, if defined, contains the string used by stdio to
2517 * format long doubles (format 'e') for output.
2520 * This symbol, if defined, contains the string used by stdio to
2521 * format long doubles (format 'f') for input.
2523 /*#define PERL_PRIfldbl "llf" / **/
2524 /*#define PERL_PRIgldbl "llg" / **/
2525 /*#define PERL_PRIeldbl "lle" / **/
2526 /*#define PERL_SCNfldbl "llf" / **/
2529 * This symbol holds the type used to declare offsets in the kernel.
2530 * It can be int, long, off_t, etc... It may be necessary to include
2531 * <sys/types.h> to get any typedef'ed information.
2534 * This symbol holds the number of bytes used by the Off_t.
2537 * This symbol holds the number of bytes used by the Off_t.
2539 #define Off_t int /* <offset> type */
2540 #define LSEEKSIZE 1 /* <offset> size */
2541 #define Off_t_size 1 /* <offset> size */
2544 * This variable contains the return type of free(). It is usually
2545 * void, but occasionally int.
2548 * This symbol is the type of pointer returned by malloc and realloc.
2550 #define Malloc_t void * /**/
2551 #define Free_t int /**/
2554 * This symbol, if defined, indicates that we're using our own malloc.
2556 /*#define MYMALLOC / **/
2559 * This symbol holds the type used to declare file modes
2560 * for systems calls. It is usually mode_t, but may be
2561 * int or unsigned short. It may be necessary to include <sys/types.h>
2562 * to get any typedef'ed information.
2564 #define Mode_t int /* file mode parameter for system calls */
2567 * This symbol is to be used during open() or fcntl(F_SETFL) to turn on
2568 * non-blocking I/O for the file descriptor. Note that there is no way
2569 * back, i.e. you cannot turn it blocking again this way. If you wish to
2570 * alternatively switch between blocking and non-blocking, use the
2571 * ioctl(FIOSNBIO) call instead, but that is not supported by all devices.
2574 * This symbol holds the errno error code set by read() when no data was
2575 * present on the non-blocking file descriptor.
2578 * This symbol holds the return code from read() when no data is present
2579 * on the non-blocking file descriptor. Be careful! If EOF_NONBLOCK is
2580 * not defined, then you can't distinguish between no data and EOF by
2581 * issuing a read(). You'll have to find another way to tell for sure!
2584 * This symbol, if defined, indicates to the C program that a read() on
2585 * a non-blocking file descriptor will return 0 on EOF, and not the value
2586 * held in RD_NODATA (-1 usually, in that case!).
2588 #define VAL_O_NONBLOCK O_NONBLOCK
2589 #define VAL_EAGAIN EAGAIN
2590 #define RD_NODATA -1
2594 * This symbol holds the type used for the 1st argument
2595 * to gethostbyaddr().
2598 * This symbol holds the type used for the 2nd argument
2599 * to gethostbyaddr().
2602 * This symbol holds the type used for the argument to
2606 * This symbol holds the type used for the 1st argument to
2609 #define Netdb_host_t const char * /**/
2610 #define Netdb_hlen_t int /**/
2611 #define Netdb_name_t const char * /**/
2612 #define Netdb_net_t unsigned long /**/
2614 /* PERL_OTHERLIBDIRS:
2615 * This variable contains a colon-separated set of paths for the perl
2616 * binary to search for additional library files or modules.
2617 * These directories will be tacked to the end of @INC.
2618 * Perl will automatically search below each path for version-
2619 * and architecture-specific directories. See PERL_INC_VERSION_LIST
2622 /*#define PERL_OTHERLIBDIRS "" / **/
2625 * This symbol defines the C type used for Perl's IV.
2628 * This symbol defines the C type used for Perl's UV.
2631 * This symbol defines the C type used for Perl's I8.
2634 * This symbol defines the C type used for Perl's U8.
2637 * This symbol defines the C type used for Perl's I16.
2640 * This symbol defines the C type used for Perl's U16.
2643 * This symbol defines the C type used for Perl's I32.
2646 * This symbol defines the C type used for Perl's U32.
2649 * This symbol defines the C type used for Perl's I64.
2652 * This symbol defines the C type used for Perl's U64.
2655 * This symbol defines the C type used for Perl's NV.
2658 * This symbol contains the sizeof(IV).
2661 * This symbol contains the sizeof(UV).
2664 * This symbol contains the sizeof(I8).
2667 * This symbol contains the sizeof(U8).
2670 * This symbol contains the sizeof(I16).
2673 * This symbol contains the sizeof(U16).
2676 * This symbol contains the sizeof(I32).
2679 * This symbol contains the sizeof(U32).
2682 * This symbol contains the sizeof(I64).
2685 * This symbol contains the sizeof(U64).
2688 * This symbol contains the sizeof(NV).
2691 * This symbol, if defined, indicates that a variable of type NVTYPE
2692 * can preserve all the bits of a variable of type UVTYPE.
2694 /* NV_PRESERVES_UV_BITS:
2695 * This symbol contains the number of bits a variable of type NVTYPE
2696 * can preserve of a variable of type UVTYPE.
2698 #define IVTYPE long /**/
2699 #define UVTYPE unsigned long /**/
2700 #define I8TYPE char /**/
2701 #define U8TYPE unsigned char /**/
2702 #define I16TYPE short /**/
2703 #define U16TYPE unsigned short /**/
2704 #define I32TYPE long /**/
2705 #define U32TYPE unsigned long /**/
2707 #define I64TYPE int64_t /**/
2708 #define U64TYPE uint64_t /**/
2710 #define NVTYPE double /**/
2711 #define IVSIZE 4 /**/
2712 #define UVSIZE 4 /**/
2713 #define I8SIZE 1 /**/
2714 #define U8SIZE 1 /**/
2715 #define I16SIZE 2 /**/
2716 #define U16SIZE 2 /**/
2717 #define I32SIZE 4 /**/
2718 #define U32SIZE 4 /**/
2720 #define I64SIZE 8 /**/
2721 #define U64SIZE 8 /**/
2723 #define NVSIZE 8 /**/
2724 #undef NV_PRESERVES_UV
2725 #define NV_PRESERVES_UV_BITS
2728 * This symbol defines the format string used for printing a Perl IV
2729 * as a signed decimal integer.
2732 * This symbol defines the format string used for printing a Perl UV
2733 * as an unsigned decimal integer.
2736 * This symbol defines the format string used for printing a Perl UV
2737 * as an unsigned octal integer.
2740 * This symbol defines the format string used for printing a Perl UV
2741 * as an unsigned hexadecimal integer in lowercase abcdef.
2744 * This symbol defines the format string used for printing a Perl NV
2745 * using %e-ish floating point format.
2748 * This symbol defines the format string used for printing a Perl NV
2749 * using %f-ish floating point format.
2752 * This symbol defines the format string used for printing a Perl NV
2753 * using %g-ish floating point format.
2755 #define IVdf "ld" /**/
2756 #define UVuf "lu" /**/
2757 #define UVof "lo" /**/
2758 #define UVxf "lx" /**/
2759 #define NVef "e" /**/
2760 #define NVff "f" /**/
2761 #define NVgf "g" /**/
2764 * This symbol holds the type used to declare process ids in the kernel.
2765 * It can be int, uint, pid_t, etc... It may be necessary to include
2766 * <sys/types.h> to get any typedef'ed information.
2768 #define Pid_t int /* PID type */
2771 * This symbol contains the name of the private library for this package.
2772 * The library is private in the sense that it needn't be in anyone's
2773 * execution path, but it should be accessible by the world. The program
2774 * should be prepared to do ~ expansion.
2777 * This symbol contains the ~name expanded version of PRIVLIB, to be used
2778 * in programs that are not prepared to deal with ~ expansion at run-time.
2780 #define PRIVLIB "/usr/local/lib/perl5/5.6" /**/
2781 #define PRIVLIB_EXP "/usr/local/lib/perl5/5.6" /**/
2784 * This symbol contains the size of a pointer, so that the C preprocessor
2785 * can make decisions based on it. It will be sizeof(void *) if
2786 * the compiler supports (void *); otherwise it will be
2789 #define PTRSIZE 1 /**/
2792 * This macro is to be used to generate uniformly distributed
2793 * random numbers over the range [0., 1.[. You may have to supply
2794 * an 'extern double drand48();' in your program since SunOS 4.1.3
2795 * doesn't provide you with anything relevant in it's headers.
2796 * See HAS_DRAND48_PROTO.
2799 * This symbol defines the type of the argument of the
2800 * random seed function.
2803 * This symbol defines the macro to be used in seeding the
2804 * random number generator (see Drand01).
2807 * This symbol indicates how many bits are produced by the
2808 * function used to generate normalized random numbers.
2809 * Values include 15, 16, 31, and 48.
2811 #define Drand01() ((rand() & 0x7FFF) / (double) ((unsigned long)1 << 15)) /**/
2812 #define Rand_seed_t int /**/
2813 #define seedDrand01(x) srand((Rand_seed_t)x) /**/
2814 #define RANDBITS 48 /**/
2817 * This symbol holds the minimum number of bits operated by select.
2818 * That is, if you do select(n, ...), how many bits at least will be
2819 * cleared in the masks if some activity is detected. Usually this
2820 * is either n or 32*ceil(n/32), especially many little-endians do
2821 * the latter. This is only useful if you have select(), naturally.
2823 #define SELECT_MIN_BITS 32 /**/
2826 * This symbol holds the type used for the 2nd, 3rd, and 4th
2827 * arguments to select. Usually, this is 'fd_set *', if HAS_FD_SET
2828 * is defined, and 'int *' otherwise. This is only useful if you
2829 * have select(), of course.
2831 #define Select_fd_set_t int /**/
2834 * This symbol contains a list of signal names in order of
2835 * signal number. This is intended
2836 * to be used as a static array initialization, like this:
2837 * char *sig_name[] = { SIG_NAME };
2838 * The signals in the list are separated with commas, and each signal
2839 * is surrounded by double quotes. There is no leading SIG in the signal
2840 * name, i.e. SIGQUIT is known as "QUIT".
2841 * Gaps in the signal numbers (up to NSIG) are filled in with NUMnn,
2842 * etc., where nn is the actual signal number (e.g. NUM37).
2843 * The signal number for sig_name[i] is stored in sig_num[i].
2844 * The last element is 0 to terminate the list with a NULL. This
2845 * corresponds to the 0 at the end of the sig_num list.
2848 * This symbol contains a list of signal numbers, in the same order as the
2849 * SIG_NAME list. It is suitable for static array initialization, as in:
2850 * int sig_num[] = { SIG_NUM };
2851 * The signals in the list are separated with commas, and the indices
2852 * within that list and the SIG_NAME list match, so it's easy to compute
2853 * the signal name from a number or vice versa at the price of a small
2854 * dynamic linear lookup.
2855 * Duplicates are allowed, but are moved to the end of the list.
2856 * The signal number corresponding to sig_name[i] is sig_number[i].
2857 * if (i < NSIG) then sig_number[i] == i.
2858 * The last element is 0, corresponding to the 0 at the end of
2859 * the sig_name list.
2861 #define SIG_NAME 0 /**/
2862 #define SIG_NUM 0 /**/
2865 * This symbol contains the name of the private library for this package.
2866 * The library is private in the sense that it needn't be in anyone's
2867 * execution path, but it should be accessible by the world. The program
2868 * should be prepared to do ~ expansion.
2869 * The standard distribution will put nothing in this directory.
2870 * After perl has been installed, users may install their own local
2871 * architecture-dependent modules in this directory with
2872 * MakeMaker Makefile.PL
2873 * or equivalent. See INSTALL for details.
2876 * This symbol contains the ~name expanded version of SITEARCH, to be used
2877 * in programs that are not prepared to deal with ~ expansion at run-time.
2879 #define SITEARCH "" /**/
2880 #define SITEARCH_EXP "" /**/
2883 * This symbol contains the name of the private library for this package.
2884 * The library is private in the sense that it needn't be in anyone's
2885 * execution path, but it should be accessible by the world. The program
2886 * should be prepared to do ~ expansion.
2887 * The standard distribution will put nothing in this directory.
2888 * After perl has been installed, users may install their own local
2889 * architecture-independent modules in this directory with
2890 * MakeMaker Makefile.PL
2891 * or equivalent. See INSTALL for details.
2894 * This symbol contains the ~name expanded version of SITELIB, to be used
2895 * in programs that are not prepared to deal with ~ expansion at run-time.
2898 * This define is SITELIB_EXP with any trailing version-specific component
2899 * removed. The elements in inc_version_list (inc_version_list.U) can
2900 * be tacked onto this variable to generate a list of directories to search.
2902 #define SITELIB "" /**/
2903 #define SITELIB_EXP "" /**/
2904 #define SITELIB_STEM "" /**/
2907 * This symbol holds the size of a Size_t in bytes.
2909 #define Size_t_size 1 /* */
2912 * This symbol holds the type used to declare length parameters
2913 * for string functions. It is usually size_t, but may be
2914 * unsigned long, int, etc. It may be necessary to include
2915 * <sys/types.h> to get any typedef'ed information.
2917 #define Size_t int /* length paramater for string functions */
2920 * This symbol holds the type used for the size argument of
2921 * various socket calls (just the base type, not the pointer-to).
2923 #define Sock_size_t int /**/
2926 * This symbol holds the type used by functions that return
2927 * a count of bytes or an error condition. It must be a signed type.
2928 * It is usually ssize_t, but may be long or int, etc.
2929 * It may be necessary to include <sys/types.h> or <unistd.h>
2930 * to get any typedef'ed information.
2931 * We will pick a type such that sizeof(SSize_t) == sizeof(Size_t).
2933 #define SSize_t int /* signed count of bytes */
2936 * This variable contains the string to put in front of a perl
2937 * script to make sure (one hopes) that it runs with perl and not
2940 #define STARTPERL "" /**/
2942 /* HAS_STDIO_STREAM_ARRAY:
2943 * This symbol, if defined, tells that there is an array
2944 * holding the stdio streams.
2946 /* STDIO_STREAM_ARRAY:
2947 * This symbol tells the name of the array holding the stdio streams.
2948 * Usual values include _iob, __iob, and __sF.
2950 /*#define HAS_STDIO_STREAM_ARRAY / **/
2951 #define STDIO_STREAM_ARRAY
2954 * This symbol defines the format string used for printing a Uid_t.
2956 #define Uid_t_f "lu" /**/
2959 * This symbol holds the signedess of a Uid_t.
2960 * 1 for unsigned, -1 for signed.
2962 #define Uid_t_sign 1 /* UID sign */
2965 * This symbol holds the size of a Uid_t in bytes.
2967 #define Uid_t_size 4 /* UID size */
2970 * This symbol holds the type used to declare user ids in the kernel.
2971 * It can be int, ushort, uid_t, etc... It may be necessary to include
2972 * <sys/types.h> to get any typedef'ed information.
2974 #define Uid_t int /* UID type */
2977 * This symbol, if defined, indicates that 64-bit integers should
2978 * be used when available. If not defined, the native integers
2979 * will be employed (be they 32 or 64 bits). The minimal possible
2980 * 64-bitness is used, just enough to get 64-bit integers into Perl.
2981 * This may mean using for example "long longs", while your memory
2982 * may still be limited to 2 gigabytes.
2985 * This symbol, if defined, indicates that 64-bit integers should
2986 * be used when available. If not defined, the native integers
2987 * will be used (be they 32 or 64 bits). The maximal possible
2988 * 64-bitness is employed: LP64 or ILP64, meaning that you will
2989 * be able to use more than 2 gigabytes of memory. This mode is
2990 * even more binary incompatible than USE_64_BIT_INT. You may not
2991 * be able to run the resulting executable in a 32-bit CPU at all or
2992 * you may need at least to reboot your OS to 64-bit mode.
2994 #ifndef USE_64_BIT_INT
2995 /*#define USE_64_BIT_INT / **/
2998 #ifndef USE_64_BIT_ALL
2999 /*#define USE_64_BIT_ALL / **/
3003 * This symbol, if defined, indicates that large file support
3004 * should be used when available.
3006 #ifndef USE_LARGE_FILES
3007 /*#define USE_LARGE_FILES / **/
3011 * This symbol, if defined, indicates that long doubles should
3012 * be used when available.
3014 #ifndef USE_LONG_DOUBLE
3015 /*#define USE_LONG_DOUBLE / **/
3019 * This symbol, if defined, indicates that 64-bit interfaces and
3020 * long doubles should be used when available.
3022 #ifndef USE_MORE_BITS
3023 /*#define USE_MORE_BITS / **/
3027 * This symbol, if defined, indicates that Perl should
3028 * be built to use multiplicity.
3030 #ifndef MULTIPLICITY
3031 /*#define MULTIPLICITY / **/
3035 * This symbol, if defined, indicates that the PerlIO abstraction should
3036 * be used throughout. If not defined, stdio should be
3037 * used in a fully backward compatible manner.
3040 /*#define USE_PERLIO / **/
3044 * This symbol, if defined, indicates that Perl should
3045 * be built to use socks.
3048 /*#define USE_SOCKS / **/
3052 * This symbol, if defined, indicates that Perl should be built to
3053 * use the interpreter-based threading implementation.
3056 * This symbol, if defined, indicates that Perl should be built to
3057 * use the 5.005-based threading implementation.
3059 /* OLD_PTHREADS_API:
3060 * This symbol, if defined, indicates that Perl should
3061 * be built to use the old draft POSIX threads API.
3063 /*#define USE_5005THREADS / **/
3064 /*#define USE_ITHREADS / **/
3065 #if defined(USE_5005THREADS) && !defined(USE_ITHREADS)
3066 #define USE_THREADS /* until src is revised*/
3068 /*#define OLD_PTHREADS_API / **/
3071 * If defined, this symbol contains the name of a private library.
3072 * The library is private in the sense that it needn't be in anyone's
3073 * execution path, but it should be accessible by the world.
3074 * It may have a ~ on the front.
3075 * The standard distribution will put nothing in this directory.
3076 * Vendors who distribute perl may wish to place their own
3077 * architecture-dependent modules and extensions in this directory with
3078 * MakeMaker Makefile.PL INSTALLDIRS=vendor
3079 * or equivalent. See INSTALL for details.
3081 /* PERL_VENDORARCH_EXP:
3082 * This symbol contains the ~name expanded version of PERL_VENDORARCH, to be used
3083 * in programs that are not prepared to deal with ~ expansion at run-time.
3085 /*#define PERL_VENDORARCH "" / **/
3086 /*#define PERL_VENDORARCH_EXP "" / **/
3088 /* PERL_VENDORLIB_EXP:
3089 * This symbol contains the ~name expanded version of VENDORLIB, to be used
3090 * in programs that are not prepared to deal with ~ expansion at run-time.
3092 /* PERL_VENDORLIB_STEM:
3093 * This define is PERL_VENDORLIB_EXP with any trailing version-specific component
3094 * removed. The elements in inc_version_list (inc_version_list.U) can
3095 * be tacked onto this variable to generate a list of directories to search.
3097 /*#define PERL_VENDORLIB_EXP "" / **/
3098 /*#define PERL_VENDORLIB_STEM "" / **/
3101 * This symbol indicates how much support of the void type is given by this
3102 * compiler. What various bits mean:
3104 * 1 = supports declaration of void
3105 * 2 = supports arrays of pointers to functions returning void
3106 * 4 = supports comparisons between pointers to void functions and
3107 * addresses of void functions
3108 * 8 = suports declaration of generic void pointers
3110 * The package designer should define VOIDUSED to indicate the requirements
3111 * of the package. This can be done either by #defining VOIDUSED before
3112 * including config.h, or by defining defvoidused in Myinit.U. If the
3113 * latter approach is taken, only those flags will be tested. If the
3114 * level of void support necessary is not present, defines void to int.
3120 #if (VOIDFLAGS & VOIDUSED) != VOIDUSED
3121 #define void int /* is void to be avoided? */
3122 #define M_VOID /* Xenix strikes again */
3125 /* PERL_XS_APIVERSION:
3126 * This variable contains the version of the oldest perl binary
3127 * compatible with the present perl. perl.c:incpush() and
3128 * lib/lib.pm will automatically search in for older
3129 * directories across major versions back to xs_apiversion.
3130 * This is only useful if you have a perl library directory tree
3131 * structured like the default one.
3132 * See INSTALL for how this works.
3133 * The versioned site_perl directory was introduced in 5.005,
3134 * so that is the lowest possible value.
3135 * Since this can depend on compile time options (such as
3136 * bincompat) it is set by Configure. Other non-default sources
3137 * of potential incompatibility, such as multiplicity, threads,
3138 * debugging, 64bits, sfio, etc., are not checked for currently,
3139 * though in principle we could go snooping around in old
3142 /* PERL_PM_APIVERSION:
3143 * This variable contains the version of the oldest perl
3144 * compatible with the present perl. (That is, pure perl modules
3145 * written for pm_apiversion will still work for the current
3146 * version). perl.c:incpush() and lib/lib.pm will automatically
3147 * search in for older directories across major versions
3148 * back to pm_apiversion. This is only useful if you have a perl
3149 * library directory tree structured like the default one. The
3150 * versioned site_perl library was introduced in 5.005, so that's
3151 * the default setting for this variable. It's hard to imagine
3152 * it changing before Perl6. It is included here for symmetry
3153 * with xs_apiveprsion -- the searching algorithms will
3154 * (presumably) be similar.
3155 * See the INSTALL file for how this works.
3157 #define PERL_XS_APIVERSION "5.005"
3158 #define PERL_PM_APIVERSION "5.005"
3161 * This symbol, if defined, indicates that the getpgrp routine is
3162 * available to get the current process group.
3165 * This symbol, if defined, indicates that getpgrp needs one
3166 * arguments whereas USG one needs none.
3168 /*#define HAS_GETPGRP / **/
3169 /*#define USE_BSD_GETPGRP / **/
3172 * This symbol, if defined, indicates that the setpgrp routine is
3173 * available to set the current process group.
3176 * This symbol, if defined, indicates that setpgrp needs two
3177 * arguments whereas USG one needs none. See also HAS_SETPGID
3178 * for a POSIX interface.
3180 /*#define HAS_SETPGRP / **/
3181 /*#define USE_BSD_SETPGRP / **/
3184 * This symbol, if defined, indicates that fcntl() can be used
3185 * for file locking. Normally on Unix systems this is defined.
3186 * It may be undefined on VMS.
3188 /*#define FCNTL_CAN_LOCK / **/