3 * Copyright (C) 1993, 1994, 1996, 1997, 1998, 1999,
4 * 2000, 2001, 2002, by Larry Wall and others
6 * You may distribute under the terms of either the GNU General Public
7 * License or the Artistic License, as specified in the README file.
23 #define SAVEt_NSTAB 12
24 #define SAVEt_SVREF 13
26 #define SAVEt_FREESV 15
27 #define SAVEt_FREEOP 16
28 #define SAVEt_FREEPV 17
29 #define SAVEt_CLEARSV 18
30 #define SAVEt_DELETE 19
31 #define SAVEt_DESTRUCTOR 20
32 #define SAVEt_REGCONTEXT 21
33 #define SAVEt_STACK_POS 22
35 #define SAVEt_AELEM 24
36 #define SAVEt_HELEM 25
38 #define SAVEt_HINTS 27
39 #define SAVEt_ALLOC 28
40 #define SAVEt_GENERIC_SVREF 29
41 #define SAVEt_DESTRUCTOR_X 30
44 #define SAVEt_COMPPAD 33
45 #define SAVEt_GENERIC_PVREF 34
46 #define SAVEt_PADSV 35
47 #define SAVEt_MORTALIZESV 36
48 #define SAVEt_SHARED_PVREF 37
51 #ifndef SCOPE_SAVES_SIGNAL_MASK
52 #define SCOPE_SAVES_SIGNAL_MASK 0
55 #define SSCHECK(need) if (PL_savestack_ix + (need) > PL_savestack_max) savestack_grow()
56 #define SSGROW(need) if (PL_savestack_ix + (need) > PL_savestack_max) savestack_grow_cnt(need)
57 #define SSPUSHINT(i) (PL_savestack[PL_savestack_ix++].any_i32 = (I32)(i))
58 #define SSPUSHLONG(i) (PL_savestack[PL_savestack_ix++].any_long = (long)(i))
59 #define SSPUSHBOOL(p) (PL_savestack[PL_savestack_ix++].any_bool = (p))
60 #define SSPUSHIV(i) (PL_savestack[PL_savestack_ix++].any_iv = (IV)(i))
61 #define SSPUSHPTR(p) (PL_savestack[PL_savestack_ix++].any_ptr = (void*)(p))
62 #define SSPUSHDPTR(p) (PL_savestack[PL_savestack_ix++].any_dptr = (p))
63 #define SSPUSHDXPTR(p) (PL_savestack[PL_savestack_ix++].any_dxptr = (p))
64 #define SSPOPINT (PL_savestack[--PL_savestack_ix].any_i32)
65 #define SSPOPLONG (PL_savestack[--PL_savestack_ix].any_long)
66 #define SSPOPBOOL (PL_savestack[--PL_savestack_ix].any_bool)
67 #define SSPOPIV (PL_savestack[--PL_savestack_ix].any_iv)
68 #define SSPOPPTR (PL_savestack[--PL_savestack_ix].any_ptr)
69 #define SSPOPDPTR (PL_savestack[--PL_savestack_ix].any_dptr)
70 #define SSPOPDXPTR (PL_savestack[--PL_savestack_ix].any_dxptr)
73 =head1 Callback Functions
75 =for apidoc Ams||SAVETMPS
76 Opening bracket for temporaries on a callback. See C<FREETMPS> and
79 =for apidoc Ams||FREETMPS
80 Closing bracket for temporaries on a callback. See C<SAVETMPS> and
83 =for apidoc Ams||ENTER
84 Opening bracket on a callback. See C<LEAVE> and L<perlcall>.
86 =for apidoc Ams||LEAVE
87 Closing bracket on a callback. See C<ENTER> and L<perlcall>.
92 #define SAVETMPS save_int((int*)&PL_tmps_floor), PL_tmps_floor = PL_tmps_ix
93 #define FREETMPS if (PL_tmps_ix > PL_tmps_floor) free_tmps()
99 DEBUG_l(WITH_THR(Perl_deb(aTHX_ "ENTER scope %ld at %s:%d\n", \
100 PL_scopestack_ix, __FILE__, __LINE__))); \
104 DEBUG_l(WITH_THR(Perl_deb(aTHX_ "LEAVE scope %ld at %s:%d\n", \
105 PL_scopestack_ix, __FILE__, __LINE__))); \
109 #define ENTER push_scope()
110 #define LEAVE pop_scope()
112 #define LEAVE_SCOPE(old) if (PL_savestack_ix > old) leave_scope(old)
115 * Not using SOFT_CAST on SAVESPTR, SAVEGENERICSV and SAVEFREESV
116 * because these are used for several kinds of pointer values
118 #define SAVEI8(i) save_I8(SOFT_CAST(I8*)&(i))
119 #define SAVEI16(i) save_I16(SOFT_CAST(I16*)&(i))
120 #define SAVEI32(i) save_I32(SOFT_CAST(I32*)&(i))
121 #define SAVEINT(i) save_int(SOFT_CAST(int*)&(i))
122 #define SAVEIV(i) save_iv(SOFT_CAST(IV*)&(i))
123 #define SAVELONG(l) save_long(SOFT_CAST(long*)&(l))
124 #define SAVEBOOL(b) save_bool(SOFT_CAST(bool*)&(b))
125 #define SAVESPTR(s) save_sptr((SV**)&(s))
126 #define SAVEPPTR(s) save_pptr(SOFT_CAST(char**)&(s))
127 #define SAVEVPTR(s) save_vptr((void*)&(s))
128 #define SAVEPADSV(s) save_padsv(s)
129 #define SAVEFREESV(s) save_freesv((SV*)(s))
130 #define SAVEMORTALIZESV(s) save_mortalizesv((SV*)(s))
131 #define SAVEFREEOP(o) save_freeop(SOFT_CAST(OP*)(o))
132 #define SAVEFREEPV(p) save_freepv(SOFT_CAST(char*)(p))
133 #define SAVECLEARSV(sv) save_clearsv(SOFT_CAST(SV**)&(sv))
134 #define SAVEGENERICSV(s) save_generic_svref((SV**)&(s))
135 #define SAVEGENERICPV(s) save_generic_pvref((char**)&(s))
136 #define SAVESHAREDPV(s) save_shared_pvref((char**)&(s))
137 #define SAVEDELETE(h,k,l) \
138 save_delete(SOFT_CAST(HV*)(h), SOFT_CAST(char*)(k), (I32)(l))
139 #define SAVEDESTRUCTOR(f,p) \
140 save_destructor((DESTRUCTORFUNC_NOCONTEXT_t)(f), SOFT_CAST(void*)(p))
142 #define SAVEDESTRUCTOR_X(f,p) \
143 save_destructor_x((DESTRUCTORFUNC_t)(f), SOFT_CAST(void*)(p))
145 #define SAVESTACK_POS() \
148 SSPUSHINT(PL_stack_sp - PL_stack_base); \
149 SSPUSHINT(SAVEt_STACK_POS); \
152 #define SAVEOP() save_op()
154 #define SAVEHINTS() \
156 if (PL_hints & HINT_LOCALIZE_HH) \
160 SSPUSHINT(PL_hints); \
161 SSPUSHINT(SAVEt_HINTS); \
165 #define SAVECOMPPAD() \
168 SSPUSHPTR((SV*)PL_comppad); \
169 SSPUSHINT(SAVEt_COMPPAD); \
173 # define SAVECOPSTASH(c) SAVEPPTR(CopSTASHPV(c))
174 # define SAVECOPSTASH_FREE(c) SAVESHAREDPV(CopSTASHPV(c))
175 # define SAVECOPFILE(c) SAVEPPTR(CopFILE(c))
176 # define SAVECOPFILE_FREE(c) SAVESHAREDPV(CopFILE(c))
178 # define SAVECOPSTASH(c) SAVESPTR(CopSTASH(c))
179 # define SAVECOPSTASH_FREE(c) SAVECOPSTASH(c) /* XXX not refcounted */
180 # define SAVECOPFILE(c) SAVESPTR(CopFILEGV(c))
181 # define SAVECOPFILE_FREE(c) SAVEGENERICSV(CopFILEGV(c))
184 #define SAVECOPLINE(c) SAVEI16(CopLINE(c))
186 /* SSNEW() temporarily allocates a specified number of bytes of data on the
187 * savestack. It returns an integer index into the savestack, because a
188 * pointer would get broken if the savestack is moved on reallocation.
189 * SSNEWa() works like SSNEW(), but also aligns the data to the specified
190 * number of bytes. MEM_ALIGNBYTES is perhaps the most useful. The
191 * alignment will be preserved therough savestack reallocation *only* if
192 * realloc returns data aligned to a size divisible by `align'!
194 * SSPTR() converts the index returned by SSNEW/SSNEWa() into a pointer.
197 #define SSNEW(size) Perl_save_alloc(aTHX_ (size), 0)
198 #define SSNEWt(n,t) SSNEW((n)*sizeof(t))
199 #define SSNEWa(size,align) Perl_save_alloc(aTHX_ (size), \
200 (align - ((int)((caddr_t)&PL_savestack[PL_savestack_ix]) % align)) % align)
201 #define SSNEWat(n,t,align) SSNEWa((n)*sizeof(t), align)
203 #define SSPTR(off,type) ((type) ((char*)PL_savestack + off))
204 #define SSPTRt(off,type) ((type*) ((char*)PL_savestack + off))
206 /* A jmpenv packages the state required to perform a proper non-local jump.
207 * Note that there is a start_env initialized when perl starts, and top_env
208 * points to this initially, so top_env should always be non-null.
210 * Existence of a non-null top_env->je_prev implies it is valid to call
211 * longjmp() at that runlevel (we make sure start_env.je_prev is always
212 * null to ensure this).
214 * je_mustcatch, when set at any runlevel to TRUE, means eval ops must
215 * establish a local jmpenv to handle exception traps. Care must be taken
216 * to restore the previous value of je_mustcatch before exiting the
217 * stack frame iff JMPENV_PUSH was not called in that stack frame.
222 struct jmpenv * je_prev;
223 Sigjmp_buf je_buf; /* only for use if !je_throw */
224 int je_ret; /* last exception thrown */
225 bool je_mustcatch; /* need to call longjmp()? */
226 #ifdef PERL_FLEXIBLE_EXCEPTIONS
227 void (*je_throw)(int v); /* last for bincompat */
228 bool je_noset; /* no need for setjmp() */
232 typedef struct jmpenv JMPENV;
234 #ifdef OP_IN_REGISTER
235 #define OP_REG_TO_MEM PL_opsave = op
236 #define OP_MEM_TO_REG op = PL_opsave
238 #define OP_REG_TO_MEM NOOP
239 #define OP_MEM_TO_REG NOOP
243 * How to build the first jmpenv.
245 * top_env needs to be non-zero. It points to an area
246 * in which longjmp() stuff is stored, as C callstack
247 * info there at least is thread specific this has to
248 * be per-thread. Otherwise a 'die' in a thread gives
249 * that thread the C stack of last thread to do an eval {}!
252 #define JMPENV_BOOTSTRAP \
254 Zero(&PL_start_env, 1, JMPENV); \
255 PL_start_env.je_ret = -1; \
256 PL_start_env.je_mustcatch = TRUE; \
257 PL_top_env = &PL_start_env; \
260 #ifdef PERL_FLEXIBLE_EXCEPTIONS
263 * These exception-handling macros are split up to
264 * ease integration with C++ exceptions.
266 * To use C++ try+catch to catch Perl exceptions, an extension author
267 * needs to first write an extern "C" function to throw an appropriate
268 * exception object; typically it will be or contain an integer,
269 * because Perl's internals use integers to track exception types:
270 * extern "C" { static void thrower(int i) { throw i; } }
272 * Then (as shown below) the author needs to use, not the simple
273 * JMPENV_PUSH, but several of its constitutent macros, to arrange for
274 * the Perl internals to call thrower() rather than longjmp() to
278 * JMPENV_PUSH_INIT(thrower);
280 * ... stuff that may throw exceptions ...
282 * catch (int why) { // or whatever matches thrower()
286 * ... // handle various Perl exception codes
289 * JMPENV_POP; // don't forget this!
293 * Function that catches/throws, and its callback for the
294 * body of protected processing.
296 typedef void *(CPERLscope(*protect_body_t)) (pTHX_ va_list);
297 typedef void *(CPERLscope(*protect_proc_t)) (pTHX_ volatile JMPENV *pcur_env,
298 int *, protect_body_t, ...);
300 #define dJMPENV JMPENV cur_env; \
301 volatile JMPENV *pcur_env = ((cur_env.je_noset = 0),&cur_env)
303 #define JMPENV_PUSH_INIT_ENV(ce,THROWFUNC) \
305 (ce).je_throw = (THROWFUNC); \
307 (ce).je_mustcatch = FALSE; \
308 (ce).je_prev = PL_top_env; \
309 PL_top_env = &(ce); \
313 #define JMPENV_PUSH_INIT(THROWFUNC) JMPENV_PUSH_INIT_ENV(*(JMPENV*)pcur_env,THROWFUNC)
315 #define JMPENV_POST_CATCH_ENV(ce) \
318 PL_top_env = &(ce); \
321 #define JMPENV_POST_CATCH JMPENV_POST_CATCH_ENV(*(JMPENV*)pcur_env)
323 #define JMPENV_PUSH_ENV(ce,v) \
325 if (!(ce).je_noset) { \
326 DEBUG_l(Perl_deb(aTHX_ "Setting up jumplevel %p, was %p\n", \
328 JMPENV_PUSH_INIT_ENV(ce,NULL); \
329 EXCEPT_SET_ENV(ce,PerlProc_setjmp((ce).je_buf, SCOPE_SAVES_SIGNAL_MASK));\
333 EXCEPT_SET_ENV(ce,0); \
334 JMPENV_POST_CATCH_ENV(ce); \
335 (v) = EXCEPT_GET_ENV(ce); \
338 #define JMPENV_PUSH(v) JMPENV_PUSH_ENV(*(JMPENV*)pcur_env,v)
340 #define JMPENV_POP_ENV(ce) \
342 if (PL_top_env == &(ce)) \
343 PL_top_env = (ce).je_prev; \
346 #define JMPENV_POP JMPENV_POP_ENV(*(JMPENV*)pcur_env)
348 #define JMPENV_JUMP(v) \
351 if (PL_top_env->je_prev) { \
352 if (PL_top_env->je_throw) \
353 PL_top_env->je_throw(v); \
355 PerlProc_longjmp(PL_top_env->je_buf, (v)); \
358 PerlProc_exit(STATUS_NATIVE_EXPORT); \
359 PerlIO_printf(Perl_error_log, "panic: top_env\n"); \
363 #define EXCEPT_GET_ENV(ce) ((ce).je_ret)
364 #define EXCEPT_GET EXCEPT_GET_ENV(*(JMPENV*)pcur_env)
365 #define EXCEPT_SET_ENV(ce,v) ((ce).je_ret = (v))
366 #define EXCEPT_SET(v) EXCEPT_SET_ENV(*(JMPENV*)pcur_env,v)
368 #else /* !PERL_FLEXIBLE_EXCEPTIONS */
370 #define dJMPENV JMPENV cur_env
372 #define JMPENV_PUSH(v) \
374 DEBUG_l(Perl_deb(aTHX_ "Setting up jumplevel %p, was %p\n", \
375 &cur_env, PL_top_env)); \
376 cur_env.je_prev = PL_top_env; \
378 cur_env.je_ret = PerlProc_setjmp(cur_env.je_buf, SCOPE_SAVES_SIGNAL_MASK); \
380 PL_top_env = &cur_env; \
381 cur_env.je_mustcatch = FALSE; \
382 (v) = cur_env.je_ret; \
386 STMT_START { PL_top_env = cur_env.je_prev; } STMT_END
388 #define JMPENV_JUMP(v) \
391 if (PL_top_env->je_prev) \
392 PerlProc_longjmp(PL_top_env->je_buf, (v)); \
394 PerlProc_exit(STATUS_NATIVE_EXPORT); \
395 PerlIO_printf(PerlIO_stderr(), "panic: top_env\n"); \
399 #endif /* PERL_FLEXIBLE_EXCEPTIONS */
401 #define CATCH_GET (PL_top_env->je_mustcatch)
402 #define CATCH_SET(v) (PL_top_env->je_mustcatch = (v))