5 * "A fair jaw-cracker dwarf-language must be." --Samwise Gamgee
8 /* This file contains functions for compiling a regular expression. See
9 * also regexec.c which funnily enough, contains functions for executing
10 * a regular expression.
12 * This file is also copied at build time to ext/re/re_comp.c, where
13 * it's built with -DPERL_EXT_RE_BUILD -DPERL_EXT_RE_DEBUG -DPERL_EXT.
14 * This causes the main functions to be compiled under new names and with
15 * debugging support added, which makes "use re 'debug'" work.
18 /* NOTE: this is derived from Henry Spencer's regexp code, and should not
19 * confused with the original package (see point 3 below). Thanks, Henry!
22 /* Additional note: this code is very heavily munged from Henry's version
23 * in places. In some spots I've traded clarity for efficiency, so don't
24 * blame Henry for some of the lack of readability.
27 /* The names of the functions have been changed from regcomp and
28 * regexec to pregcomp and pregexec in order to avoid conflicts
29 * with the POSIX routines of the same names.
32 #ifdef PERL_EXT_RE_BUILD
37 * pregcomp and pregexec -- regsub and regerror are not used in perl
39 * Copyright (c) 1986 by University of Toronto.
40 * Written by Henry Spencer. Not derived from licensed software.
42 * Permission is granted to anyone to use this software for any
43 * purpose on any computer system, and to redistribute it freely,
44 * subject to the following restrictions:
46 * 1. The author is not responsible for the consequences of use of
47 * this software, no matter how awful, even if they arise
50 * 2. The origin of this software must not be misrepresented, either
51 * by explicit claim or by omission.
53 * 3. Altered versions must be plainly marked as such, and must not
54 * be misrepresented as being the original software.
57 **** Alterations to Henry's code are...
59 **** Copyright (C) 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
60 **** 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
61 **** by Larry Wall and others
63 **** You may distribute under the terms of either the GNU General Public
64 **** License or the Artistic License, as specified in the README file.
67 * Beware that some of this code is subtly aware of the way operator
68 * precedence is structured in regular expressions. Serious changes in
69 * regular-expression syntax might require a total rethink.
72 #define PERL_IN_REGCOMP_C
75 #ifndef PERL_IN_XSUB_RE
80 #ifdef PERL_IN_XSUB_RE
91 # if defined(BUGGY_MSC6)
92 /* MSC 6.00A breaks on op/regexp.t test 85 unless we turn this off */
93 # pragma optimize("a",off)
94 /* But MSC 6.00A is happy with 'w', for aliases only across function calls*/
95 # pragma optimize("w",on )
96 # endif /* BUGGY_MSC6 */
100 #define STATIC static
103 typedef struct RExC_state_t {
104 U32 flags; /* are we folding, multilining? */
105 char *precomp; /* uncompiled string. */
106 REGEXP *rx_sv; /* The SV that is the regexp. */
107 regexp *rx; /* perl core regexp structure */
108 regexp_internal *rxi; /* internal data for regexp object pprivate field */
109 char *start; /* Start of input for compile */
110 char *end; /* End of input for compile */
111 char *parse; /* Input-scan pointer. */
112 I32 whilem_seen; /* number of WHILEM in this expr */
113 regnode *emit_start; /* Start of emitted-code area */
114 regnode *emit_bound; /* First regnode outside of the allocated space */
115 regnode *emit; /* Code-emit pointer; ®dummy = don't = compiling */
116 I32 naughty; /* How bad is this pattern? */
117 I32 sawback; /* Did we see \1, ...? */
119 I32 size; /* Code size. */
120 I32 npar; /* Capture buffer count, (OPEN). */
121 I32 cpar; /* Capture buffer count, (CLOSE). */
122 I32 nestroot; /* root parens we are in - used by accept */
126 regnode **open_parens; /* pointers to open parens */
127 regnode **close_parens; /* pointers to close parens */
128 regnode *opend; /* END node in program */
129 I32 utf8; /* whether the pattern is utf8 or not */
130 I32 orig_utf8; /* whether the pattern was originally in utf8 */
131 /* XXX use this for future optimisation of case
132 * where pattern must be upgraded to utf8. */
133 HV *charnames; /* cache of named sequences */
134 HV *paren_names; /* Paren names */
136 regnode **recurse; /* Recurse regops */
137 I32 recurse_count; /* Number of recurse regops */
139 char *starttry; /* -Dr: where regtry was called. */
140 #define RExC_starttry (pRExC_state->starttry)
143 const char *lastparse;
145 AV *paren_name_list; /* idx -> name */
146 #define RExC_lastparse (pRExC_state->lastparse)
147 #define RExC_lastnum (pRExC_state->lastnum)
148 #define RExC_paren_name_list (pRExC_state->paren_name_list)
152 #define RExC_flags (pRExC_state->flags)
153 #define RExC_precomp (pRExC_state->precomp)
154 #define RExC_rx_sv (pRExC_state->rx_sv)
155 #define RExC_rx (pRExC_state->rx)
156 #define RExC_rxi (pRExC_state->rxi)
157 #define RExC_start (pRExC_state->start)
158 #define RExC_end (pRExC_state->end)
159 #define RExC_parse (pRExC_state->parse)
160 #define RExC_whilem_seen (pRExC_state->whilem_seen)
161 #ifdef RE_TRACK_PATTERN_OFFSETS
162 #define RExC_offsets (pRExC_state->rxi->u.offsets) /* I am not like the others */
164 #define RExC_emit (pRExC_state->emit)
165 #define RExC_emit_start (pRExC_state->emit_start)
166 #define RExC_emit_bound (pRExC_state->emit_bound)
167 #define RExC_naughty (pRExC_state->naughty)
168 #define RExC_sawback (pRExC_state->sawback)
169 #define RExC_seen (pRExC_state->seen)
170 #define RExC_size (pRExC_state->size)
171 #define RExC_npar (pRExC_state->npar)
172 #define RExC_nestroot (pRExC_state->nestroot)
173 #define RExC_extralen (pRExC_state->extralen)
174 #define RExC_seen_zerolen (pRExC_state->seen_zerolen)
175 #define RExC_seen_evals (pRExC_state->seen_evals)
176 #define RExC_utf8 (pRExC_state->utf8)
177 #define RExC_orig_utf8 (pRExC_state->orig_utf8)
178 #define RExC_charnames (pRExC_state->charnames)
179 #define RExC_open_parens (pRExC_state->open_parens)
180 #define RExC_close_parens (pRExC_state->close_parens)
181 #define RExC_opend (pRExC_state->opend)
182 #define RExC_paren_names (pRExC_state->paren_names)
183 #define RExC_recurse (pRExC_state->recurse)
184 #define RExC_recurse_count (pRExC_state->recurse_count)
187 #define ISMULT1(c) ((c) == '*' || (c) == '+' || (c) == '?')
188 #define ISMULT2(s) ((*s) == '*' || (*s) == '+' || (*s) == '?' || \
189 ((*s) == '{' && regcurly(s)))
192 #undef SPSTART /* dratted cpp namespace... */
195 * Flags to be passed up and down.
197 #define WORST 0 /* Worst case. */
198 #define HASWIDTH 0x01 /* Known to match non-null strings. */
199 #define SIMPLE 0x02 /* Simple enough to be STAR/PLUS operand. */
200 #define SPSTART 0x04 /* Starts with * or +. */
201 #define TRYAGAIN 0x08 /* Weeded out a declaration. */
202 #define POSTPONED 0x10 /* (?1),(?&name), (??{...}) or similar */
204 #define REG_NODE_NUM(x) ((x) ? (int)((x)-RExC_emit_start) : -1)
206 /* whether trie related optimizations are enabled */
207 #if PERL_ENABLE_EXTENDED_TRIE_OPTIMISATION
208 #define TRIE_STUDY_OPT
209 #define FULL_TRIE_STUDY
215 #define PBYTE(u8str,paren) ((U8*)(u8str))[(paren) >> 3]
216 #define PBITVAL(paren) (1 << ((paren) & 7))
217 #define PAREN_TEST(u8str,paren) ( PBYTE(u8str,paren) & PBITVAL(paren))
218 #define PAREN_SET(u8str,paren) PBYTE(u8str,paren) |= PBITVAL(paren)
219 #define PAREN_UNSET(u8str,paren) PBYTE(u8str,paren) &= (~PBITVAL(paren))
222 /* About scan_data_t.
224 During optimisation we recurse through the regexp program performing
225 various inplace (keyhole style) optimisations. In addition study_chunk
226 and scan_commit populate this data structure with information about
227 what strings MUST appear in the pattern. We look for the longest
228 string that must appear for at a fixed location, and we look for the
229 longest string that may appear at a floating location. So for instance
234 Both 'FOO' and 'A' are fixed strings. Both 'B' and 'BAR' are floating
235 strings (because they follow a .* construct). study_chunk will identify
236 both FOO and BAR as being the longest fixed and floating strings respectively.
238 The strings can be composites, for instance
242 will result in a composite fixed substring 'foo'.
244 For each string some basic information is maintained:
246 - offset or min_offset
247 This is the position the string must appear at, or not before.
248 It also implicitly (when combined with minlenp) tells us how many
249 character must match before the string we are searching.
250 Likewise when combined with minlenp and the length of the string
251 tells us how many characters must appear after the string we have
255 Only used for floating strings. This is the rightmost point that
256 the string can appear at. Ifset to I32 max it indicates that the
257 string can occur infinitely far to the right.
260 A pointer to the minimum length of the pattern that the string
261 was found inside. This is important as in the case of positive
262 lookahead or positive lookbehind we can have multiple patterns
267 The minimum length of the pattern overall is 3, the minimum length
268 of the lookahead part is 3, but the minimum length of the part that
269 will actually match is 1. So 'FOO's minimum length is 3, but the
270 minimum length for the F is 1. This is important as the minimum length
271 is used to determine offsets in front of and behind the string being
272 looked for. Since strings can be composites this is the length of the
273 pattern at the time it was commited with a scan_commit. Note that
274 the length is calculated by study_chunk, so that the minimum lengths
275 are not known until the full pattern has been compiled, thus the
276 pointer to the value.
280 In the case of lookbehind the string being searched for can be
281 offset past the start point of the final matching string.
282 If this value was just blithely removed from the min_offset it would
283 invalidate some of the calculations for how many chars must match
284 before or after (as they are derived from min_offset and minlen and
285 the length of the string being searched for).
286 When the final pattern is compiled and the data is moved from the
287 scan_data_t structure into the regexp structure the information
288 about lookbehind is factored in, with the information that would
289 have been lost precalculated in the end_shift field for the
292 The fields pos_min and pos_delta are used to store the minimum offset
293 and the delta to the maximum offset at the current point in the pattern.
297 typedef struct scan_data_t {
298 /*I32 len_min; unused */
299 /*I32 len_delta; unused */
303 I32 last_end; /* min value, <0 unless valid. */
306 SV **longest; /* Either &l_fixed, or &l_float. */
307 SV *longest_fixed; /* longest fixed string found in pattern */
308 I32 offset_fixed; /* offset where it starts */
309 I32 *minlen_fixed; /* pointer to the minlen relevent to the string */
310 I32 lookbehind_fixed; /* is the position of the string modfied by LB */
311 SV *longest_float; /* longest floating string found in pattern */
312 I32 offset_float_min; /* earliest point in string it can appear */
313 I32 offset_float_max; /* latest point in string it can appear */
314 I32 *minlen_float; /* pointer to the minlen relevent to the string */
315 I32 lookbehind_float; /* is the position of the string modified by LB */
319 struct regnode_charclass_class *start_class;
323 * Forward declarations for pregcomp()'s friends.
326 static const scan_data_t zero_scan_data =
327 { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 ,0};
329 #define SF_BEFORE_EOL (SF_BEFORE_SEOL|SF_BEFORE_MEOL)
330 #define SF_BEFORE_SEOL 0x0001
331 #define SF_BEFORE_MEOL 0x0002
332 #define SF_FIX_BEFORE_EOL (SF_FIX_BEFORE_SEOL|SF_FIX_BEFORE_MEOL)
333 #define SF_FL_BEFORE_EOL (SF_FL_BEFORE_SEOL|SF_FL_BEFORE_MEOL)
336 # define SF_FIX_SHIFT_EOL (0+2)
337 # define SF_FL_SHIFT_EOL (0+4)
339 # define SF_FIX_SHIFT_EOL (+2)
340 # define SF_FL_SHIFT_EOL (+4)
343 #define SF_FIX_BEFORE_SEOL (SF_BEFORE_SEOL << SF_FIX_SHIFT_EOL)
344 #define SF_FIX_BEFORE_MEOL (SF_BEFORE_MEOL << SF_FIX_SHIFT_EOL)
346 #define SF_FL_BEFORE_SEOL (SF_BEFORE_SEOL << SF_FL_SHIFT_EOL)
347 #define SF_FL_BEFORE_MEOL (SF_BEFORE_MEOL << SF_FL_SHIFT_EOL) /* 0x20 */
348 #define SF_IS_INF 0x0040
349 #define SF_HAS_PAR 0x0080
350 #define SF_IN_PAR 0x0100
351 #define SF_HAS_EVAL 0x0200
352 #define SCF_DO_SUBSTR 0x0400
353 #define SCF_DO_STCLASS_AND 0x0800
354 #define SCF_DO_STCLASS_OR 0x1000
355 #define SCF_DO_STCLASS (SCF_DO_STCLASS_AND|SCF_DO_STCLASS_OR)
356 #define SCF_WHILEM_VISITED_POS 0x2000
358 #define SCF_TRIE_RESTUDY 0x4000 /* Do restudy? */
359 #define SCF_SEEN_ACCEPT 0x8000
361 #define UTF (RExC_utf8 != 0)
362 #define LOC ((RExC_flags & RXf_PMf_LOCALE) != 0)
363 #define FOLD ((RExC_flags & RXf_PMf_FOLD) != 0)
365 #define OOB_UNICODE 12345678
366 #define OOB_NAMEDCLASS -1
368 #define CHR_SVLEN(sv) (UTF ? sv_len_utf8(sv) : SvCUR(sv))
369 #define CHR_DIST(a,b) (UTF ? utf8_distance(a,b) : a - b)
372 /* length of regex to show in messages that don't mark a position within */
373 #define RegexLengthToShowInErrorMessages 127
376 * If MARKER[12] are adjusted, be sure to adjust the constants at the top
377 * of t/op/regmesg.t, the tests in t/op/re_tests, and those in
378 * op/pragma/warn/regcomp.
380 #define MARKER1 "<-- HERE" /* marker as it appears in the description */
381 #define MARKER2 " <-- HERE " /* marker as it appears within the regex */
383 #define REPORT_LOCATION " in regex; marked by " MARKER1 " in m/%.*s" MARKER2 "%s/"
386 * Calls SAVEDESTRUCTOR_X if needed, then calls Perl_croak with the given
387 * arg. Show regex, up to a maximum length. If it's too long, chop and add
390 #define _FAIL(code) STMT_START { \
391 const char *ellipses = ""; \
392 IV len = RExC_end - RExC_precomp; \
395 SAVEDESTRUCTOR_X(clear_re,(void*)RExC_rx_sv); \
396 if (len > RegexLengthToShowInErrorMessages) { \
397 /* chop 10 shorter than the max, to ensure meaning of "..." */ \
398 len = RegexLengthToShowInErrorMessages - 10; \
404 #define FAIL(msg) _FAIL( \
405 Perl_croak(aTHX_ "%s in regex m/%.*s%s/", \
406 msg, (int)len, RExC_precomp, ellipses))
408 #define FAIL2(msg,arg) _FAIL( \
409 Perl_croak(aTHX_ msg " in regex m/%.*s%s/", \
410 arg, (int)len, RExC_precomp, ellipses))
413 * Simple_vFAIL -- like FAIL, but marks the current location in the scan
415 #define Simple_vFAIL(m) STMT_START { \
416 const IV offset = RExC_parse - RExC_precomp; \
417 Perl_croak(aTHX_ "%s" REPORT_LOCATION, \
418 m, (int)offset, RExC_precomp, RExC_precomp + offset); \
422 * Calls SAVEDESTRUCTOR_X if needed, then Simple_vFAIL()
424 #define vFAIL(m) STMT_START { \
426 SAVEDESTRUCTOR_X(clear_re,(void*)RExC_rx_sv); \
431 * Like Simple_vFAIL(), but accepts two arguments.
433 #define Simple_vFAIL2(m,a1) STMT_START { \
434 const IV offset = RExC_parse - RExC_precomp; \
435 S_re_croak2(aTHX_ m, REPORT_LOCATION, a1, \
436 (int)offset, RExC_precomp, RExC_precomp + offset); \
440 * Calls SAVEDESTRUCTOR_X if needed, then Simple_vFAIL2().
442 #define vFAIL2(m,a1) STMT_START { \
444 SAVEDESTRUCTOR_X(clear_re,(void*)RExC_rx_sv); \
445 Simple_vFAIL2(m, a1); \
450 * Like Simple_vFAIL(), but accepts three arguments.
452 #define Simple_vFAIL3(m, a1, a2) STMT_START { \
453 const IV offset = RExC_parse - RExC_precomp; \
454 S_re_croak2(aTHX_ m, REPORT_LOCATION, a1, a2, \
455 (int)offset, RExC_precomp, RExC_precomp + offset); \
459 * Calls SAVEDESTRUCTOR_X if needed, then Simple_vFAIL3().
461 #define vFAIL3(m,a1,a2) STMT_START { \
463 SAVEDESTRUCTOR_X(clear_re,(void*)RExC_rx_sv); \
464 Simple_vFAIL3(m, a1, a2); \
468 * Like Simple_vFAIL(), but accepts four arguments.
470 #define Simple_vFAIL4(m, a1, a2, a3) STMT_START { \
471 const IV offset = RExC_parse - RExC_precomp; \
472 S_re_croak2(aTHX_ m, REPORT_LOCATION, a1, a2, a3, \
473 (int)offset, RExC_precomp, RExC_precomp + offset); \
476 #define vWARN(loc,m) STMT_START { \
477 const IV offset = loc - RExC_precomp; \
478 Perl_warner(aTHX_ packWARN(WARN_REGEXP), "%s" REPORT_LOCATION, \
479 m, (int)offset, RExC_precomp, RExC_precomp + offset); \
482 #define vWARNdep(loc,m) STMT_START { \
483 const IV offset = loc - RExC_precomp; \
484 Perl_warner(aTHX_ packWARN2(WARN_DEPRECATED, WARN_REGEXP), \
485 "%s" REPORT_LOCATION, \
486 m, (int)offset, RExC_precomp, RExC_precomp + offset); \
490 #define vWARN2(loc, m, a1) STMT_START { \
491 const IV offset = loc - RExC_precomp; \
492 Perl_warner(aTHX_ packWARN(WARN_REGEXP), m REPORT_LOCATION, \
493 a1, (int)offset, RExC_precomp, RExC_precomp + offset); \
496 #define vWARN3(loc, m, a1, a2) STMT_START { \
497 const IV offset = loc - RExC_precomp; \
498 Perl_warner(aTHX_ packWARN(WARN_REGEXP), m REPORT_LOCATION, \
499 a1, a2, (int)offset, RExC_precomp, RExC_precomp + offset); \
502 #define vWARN4(loc, m, a1, a2, a3) STMT_START { \
503 const IV offset = loc - RExC_precomp; \
504 Perl_warner(aTHX_ packWARN(WARN_REGEXP), m REPORT_LOCATION, \
505 a1, a2, a3, (int)offset, RExC_precomp, RExC_precomp + offset); \
508 #define vWARN5(loc, m, a1, a2, a3, a4) STMT_START { \
509 const IV offset = loc - RExC_precomp; \
510 Perl_warner(aTHX_ packWARN(WARN_REGEXP), m REPORT_LOCATION, \
511 a1, a2, a3, a4, (int)offset, RExC_precomp, RExC_precomp + offset); \
515 /* Allow for side effects in s */
516 #define REGC(c,s) STMT_START { \
517 if (!SIZE_ONLY) *(s) = (c); else (void)(s); \
520 /* Macros for recording node offsets. 20001227 mjd@plover.com
521 * Nodes are numbered 1, 2, 3, 4. Node #n's position is recorded in
522 * element 2*n-1 of the array. Element #2n holds the byte length node #n.
523 * Element 0 holds the number n.
524 * Position is 1 indexed.
526 #ifndef RE_TRACK_PATTERN_OFFSETS
527 #define Set_Node_Offset_To_R(node,byte)
528 #define Set_Node_Offset(node,byte)
529 #define Set_Cur_Node_Offset
530 #define Set_Node_Length_To_R(node,len)
531 #define Set_Node_Length(node,len)
532 #define Set_Node_Cur_Length(node)
533 #define Node_Offset(n)
534 #define Node_Length(n)
535 #define Set_Node_Offset_Length(node,offset,len)
536 #define ProgLen(ri) ri->u.proglen
537 #define SetProgLen(ri,x) ri->u.proglen = x
539 #define ProgLen(ri) ri->u.offsets[0]
540 #define SetProgLen(ri,x) ri->u.offsets[0] = x
541 #define Set_Node_Offset_To_R(node,byte) STMT_START { \
543 MJD_OFFSET_DEBUG(("** (%d) offset of node %d is %d.\n", \
544 __LINE__, (int)(node), (int)(byte))); \
546 Perl_croak(aTHX_ "value of node is %d in Offset macro", (int)(node)); \
548 RExC_offsets[2*(node)-1] = (byte); \
553 #define Set_Node_Offset(node,byte) \
554 Set_Node_Offset_To_R((node)-RExC_emit_start, (byte)-RExC_start)
555 #define Set_Cur_Node_Offset Set_Node_Offset(RExC_emit, RExC_parse)
557 #define Set_Node_Length_To_R(node,len) STMT_START { \
559 MJD_OFFSET_DEBUG(("** (%d) size of node %d is %d.\n", \
560 __LINE__, (int)(node), (int)(len))); \
562 Perl_croak(aTHX_ "value of node is %d in Length macro", (int)(node)); \
564 RExC_offsets[2*(node)] = (len); \
569 #define Set_Node_Length(node,len) \
570 Set_Node_Length_To_R((node)-RExC_emit_start, len)
571 #define Set_Cur_Node_Length(len) Set_Node_Length(RExC_emit, len)
572 #define Set_Node_Cur_Length(node) \
573 Set_Node_Length(node, RExC_parse - parse_start)
575 /* Get offsets and lengths */
576 #define Node_Offset(n) (RExC_offsets[2*((n)-RExC_emit_start)-1])
577 #define Node_Length(n) (RExC_offsets[2*((n)-RExC_emit_start)])
579 #define Set_Node_Offset_Length(node,offset,len) STMT_START { \
580 Set_Node_Offset_To_R((node)-RExC_emit_start, (offset)); \
581 Set_Node_Length_To_R((node)-RExC_emit_start, (len)); \
585 #if PERL_ENABLE_EXPERIMENTAL_REGEX_OPTIMISATIONS
586 #define EXPERIMENTAL_INPLACESCAN
587 #endif /*RE_TRACK_PATTERN_OFFSETS*/
589 #define DEBUG_STUDYDATA(str,data,depth) \
590 DEBUG_OPTIMISE_MORE_r(if(data){ \
591 PerlIO_printf(Perl_debug_log, \
592 "%*s" str "Pos:%"IVdf"/%"IVdf \
593 " Flags: 0x%"UVXf" Whilem_c: %"IVdf" Lcp: %"IVdf" %s", \
594 (int)(depth)*2, "", \
595 (IV)((data)->pos_min), \
596 (IV)((data)->pos_delta), \
597 (UV)((data)->flags), \
598 (IV)((data)->whilem_c), \
599 (IV)((data)->last_closep ? *((data)->last_closep) : -1), \
600 is_inf ? "INF " : "" \
602 if ((data)->last_found) \
603 PerlIO_printf(Perl_debug_log, \
604 "Last:'%s' %"IVdf":%"IVdf"/%"IVdf" %sFixed:'%s' @ %"IVdf \
605 " %sFloat: '%s' @ %"IVdf"/%"IVdf"", \
606 SvPVX_const((data)->last_found), \
607 (IV)((data)->last_end), \
608 (IV)((data)->last_start_min), \
609 (IV)((data)->last_start_max), \
610 ((data)->longest && \
611 (data)->longest==&((data)->longest_fixed)) ? "*" : "", \
612 SvPVX_const((data)->longest_fixed), \
613 (IV)((data)->offset_fixed), \
614 ((data)->longest && \
615 (data)->longest==&((data)->longest_float)) ? "*" : "", \
616 SvPVX_const((data)->longest_float), \
617 (IV)((data)->offset_float_min), \
618 (IV)((data)->offset_float_max) \
620 PerlIO_printf(Perl_debug_log,"\n"); \
623 static void clear_re(pTHX_ void *r);
625 /* Mark that we cannot extend a found fixed substring at this point.
626 Update the longest found anchored substring and the longest found
627 floating substrings if needed. */
630 S_scan_commit(pTHX_ const RExC_state_t *pRExC_state, scan_data_t *data, I32 *minlenp, int is_inf)
632 const STRLEN l = CHR_SVLEN(data->last_found);
633 const STRLEN old_l = CHR_SVLEN(*data->longest);
634 GET_RE_DEBUG_FLAGS_DECL;
636 PERL_ARGS_ASSERT_SCAN_COMMIT;
638 if ((l >= old_l) && ((l > old_l) || (data->flags & SF_BEFORE_EOL))) {
639 SvSetMagicSV(*data->longest, data->last_found);
640 if (*data->longest == data->longest_fixed) {
641 data->offset_fixed = l ? data->last_start_min : data->pos_min;
642 if (data->flags & SF_BEFORE_EOL)
644 |= ((data->flags & SF_BEFORE_EOL) << SF_FIX_SHIFT_EOL);
646 data->flags &= ~SF_FIX_BEFORE_EOL;
647 data->minlen_fixed=minlenp;
648 data->lookbehind_fixed=0;
650 else { /* *data->longest == data->longest_float */
651 data->offset_float_min = l ? data->last_start_min : data->pos_min;
652 data->offset_float_max = (l
653 ? data->last_start_max
654 : data->pos_min + data->pos_delta);
655 if (is_inf || (U32)data->offset_float_max > (U32)I32_MAX)
656 data->offset_float_max = I32_MAX;
657 if (data->flags & SF_BEFORE_EOL)
659 |= ((data->flags & SF_BEFORE_EOL) << SF_FL_SHIFT_EOL);
661 data->flags &= ~SF_FL_BEFORE_EOL;
662 data->minlen_float=minlenp;
663 data->lookbehind_float=0;
666 SvCUR_set(data->last_found, 0);
668 SV * const sv = data->last_found;
669 if (SvUTF8(sv) && SvMAGICAL(sv)) {
670 MAGIC * const mg = mg_find(sv, PERL_MAGIC_utf8);
676 data->flags &= ~SF_BEFORE_EOL;
677 DEBUG_STUDYDATA("commit: ",data,0);
680 /* Can match anything (initialization) */
682 S_cl_anything(const RExC_state_t *pRExC_state, struct regnode_charclass_class *cl)
684 PERL_ARGS_ASSERT_CL_ANYTHING;
686 ANYOF_CLASS_ZERO(cl);
687 ANYOF_BITMAP_SETALL(cl);
688 cl->flags = ANYOF_EOS|ANYOF_UNICODE_ALL;
690 cl->flags |= ANYOF_LOCALE;
693 /* Can match anything (initialization) */
695 S_cl_is_anything(const struct regnode_charclass_class *cl)
699 PERL_ARGS_ASSERT_CL_IS_ANYTHING;
701 for (value = 0; value <= ANYOF_MAX; value += 2)
702 if (ANYOF_CLASS_TEST(cl, value) && ANYOF_CLASS_TEST(cl, value + 1))
704 if (!(cl->flags & ANYOF_UNICODE_ALL))
706 if (!ANYOF_BITMAP_TESTALLSET((const void*)cl))
711 /* Can match anything (initialization) */
713 S_cl_init(const RExC_state_t *pRExC_state, struct regnode_charclass_class *cl)
715 PERL_ARGS_ASSERT_CL_INIT;
717 Zero(cl, 1, struct regnode_charclass_class);
719 cl_anything(pRExC_state, cl);
723 S_cl_init_zero(const RExC_state_t *pRExC_state, struct regnode_charclass_class *cl)
725 PERL_ARGS_ASSERT_CL_INIT_ZERO;
727 Zero(cl, 1, struct regnode_charclass_class);
729 cl_anything(pRExC_state, cl);
731 cl->flags |= ANYOF_LOCALE;
734 /* 'And' a given class with another one. Can create false positives */
735 /* We assume that cl is not inverted */
737 S_cl_and(struct regnode_charclass_class *cl,
738 const struct regnode_charclass_class *and_with)
740 PERL_ARGS_ASSERT_CL_AND;
742 assert(and_with->type == ANYOF);
743 if (!(and_with->flags & ANYOF_CLASS)
744 && !(cl->flags & ANYOF_CLASS)
745 && (and_with->flags & ANYOF_LOCALE) == (cl->flags & ANYOF_LOCALE)
746 && !(and_with->flags & ANYOF_FOLD)
747 && !(cl->flags & ANYOF_FOLD)) {
750 if (and_with->flags & ANYOF_INVERT)
751 for (i = 0; i < ANYOF_BITMAP_SIZE; i++)
752 cl->bitmap[i] &= ~and_with->bitmap[i];
754 for (i = 0; i < ANYOF_BITMAP_SIZE; i++)
755 cl->bitmap[i] &= and_with->bitmap[i];
756 } /* XXXX: logic is complicated otherwise, leave it along for a moment. */
757 if (!(and_with->flags & ANYOF_EOS))
758 cl->flags &= ~ANYOF_EOS;
760 if (cl->flags & ANYOF_UNICODE_ALL && and_with->flags & ANYOF_UNICODE &&
761 !(and_with->flags & ANYOF_INVERT)) {
762 cl->flags &= ~ANYOF_UNICODE_ALL;
763 cl->flags |= ANYOF_UNICODE;
764 ARG_SET(cl, ARG(and_with));
766 if (!(and_with->flags & ANYOF_UNICODE_ALL) &&
767 !(and_with->flags & ANYOF_INVERT))
768 cl->flags &= ~ANYOF_UNICODE_ALL;
769 if (!(and_with->flags & (ANYOF_UNICODE|ANYOF_UNICODE_ALL)) &&
770 !(and_with->flags & ANYOF_INVERT))
771 cl->flags &= ~ANYOF_UNICODE;
774 /* 'OR' a given class with another one. Can create false positives */
775 /* We assume that cl is not inverted */
777 S_cl_or(const RExC_state_t *pRExC_state, struct regnode_charclass_class *cl, const struct regnode_charclass_class *or_with)
779 PERL_ARGS_ASSERT_CL_OR;
781 if (or_with->flags & ANYOF_INVERT) {
783 * (B1 | CL1) | (!B2 & !CL2) = (B1 | !B2 & !CL2) | (CL1 | (!B2 & !CL2))
784 * <= (B1 | !B2) | (CL1 | !CL2)
785 * which is wasteful if CL2 is small, but we ignore CL2:
786 * (B1 | CL1) | (!B2 & !CL2) <= (B1 | CL1) | !B2 = (B1 | !B2) | CL1
787 * XXXX Can we handle case-fold? Unclear:
788 * (OK1(i) | OK1(i')) | !(OK1(i) | OK1(i')) =
789 * (OK1(i) | OK1(i')) | (!OK1(i) & !OK1(i'))
791 if ( (or_with->flags & ANYOF_LOCALE) == (cl->flags & ANYOF_LOCALE)
792 && !(or_with->flags & ANYOF_FOLD)
793 && !(cl->flags & ANYOF_FOLD) ) {
796 for (i = 0; i < ANYOF_BITMAP_SIZE; i++)
797 cl->bitmap[i] |= ~or_with->bitmap[i];
798 } /* XXXX: logic is complicated otherwise */
800 cl_anything(pRExC_state, cl);
803 /* (B1 | CL1) | (B2 | CL2) = (B1 | B2) | (CL1 | CL2)) */
804 if ( (or_with->flags & ANYOF_LOCALE) == (cl->flags & ANYOF_LOCALE)
805 && (!(or_with->flags & ANYOF_FOLD)
806 || (cl->flags & ANYOF_FOLD)) ) {
809 /* OR char bitmap and class bitmap separately */
810 for (i = 0; i < ANYOF_BITMAP_SIZE; i++)
811 cl->bitmap[i] |= or_with->bitmap[i];
812 if (or_with->flags & ANYOF_CLASS) {
813 for (i = 0; i < ANYOF_CLASSBITMAP_SIZE; i++)
814 cl->classflags[i] |= or_with->classflags[i];
815 cl->flags |= ANYOF_CLASS;
818 else { /* XXXX: logic is complicated, leave it along for a moment. */
819 cl_anything(pRExC_state, cl);
822 if (or_with->flags & ANYOF_EOS)
823 cl->flags |= ANYOF_EOS;
825 if (cl->flags & ANYOF_UNICODE && or_with->flags & ANYOF_UNICODE &&
826 ARG(cl) != ARG(or_with)) {
827 cl->flags |= ANYOF_UNICODE_ALL;
828 cl->flags &= ~ANYOF_UNICODE;
830 if (or_with->flags & ANYOF_UNICODE_ALL) {
831 cl->flags |= ANYOF_UNICODE_ALL;
832 cl->flags &= ~ANYOF_UNICODE;
836 #define TRIE_LIST_ITEM(state,idx) (trie->states[state].trans.list)[ idx ]
837 #define TRIE_LIST_CUR(state) ( TRIE_LIST_ITEM( state, 0 ).forid )
838 #define TRIE_LIST_LEN(state) ( TRIE_LIST_ITEM( state, 0 ).newstate )
839 #define TRIE_LIST_USED(idx) ( trie->states[state].trans.list ? (TRIE_LIST_CUR( idx ) - 1) : 0 )
844 dump_trie(trie,widecharmap,revcharmap)
845 dump_trie_interim_list(trie,widecharmap,revcharmap,next_alloc)
846 dump_trie_interim_table(trie,widecharmap,revcharmap,next_alloc)
848 These routines dump out a trie in a somewhat readable format.
849 The _interim_ variants are used for debugging the interim
850 tables that are used to generate the final compressed
851 representation which is what dump_trie expects.
853 Part of the reason for their existance is to provide a form
854 of documentation as to how the different representations function.
859 Dumps the final compressed table form of the trie to Perl_debug_log.
860 Used for debugging make_trie().
864 S_dump_trie(pTHX_ const struct _reg_trie_data *trie, HV *widecharmap,
865 AV *revcharmap, U32 depth)
868 SV *sv=sv_newmortal();
869 int colwidth= widecharmap ? 6 : 4;
870 GET_RE_DEBUG_FLAGS_DECL;
872 PERL_ARGS_ASSERT_DUMP_TRIE;
874 PerlIO_printf( Perl_debug_log, "%*sChar : %-6s%-6s%-4s ",
875 (int)depth * 2 + 2,"",
876 "Match","Base","Ofs" );
878 for( state = 0 ; state < trie->uniquecharcount ; state++ ) {
879 SV ** const tmp = av_fetch( revcharmap, state, 0);
881 PerlIO_printf( Perl_debug_log, "%*s",
883 pv_pretty(sv, SvPV_nolen_const(*tmp), SvCUR(*tmp), colwidth,
884 PL_colors[0], PL_colors[1],
885 (SvUTF8(*tmp) ? PERL_PV_ESCAPE_UNI : 0) |
886 PERL_PV_ESCAPE_FIRSTCHAR
891 PerlIO_printf( Perl_debug_log, "\n%*sState|-----------------------",
892 (int)depth * 2 + 2,"");
894 for( state = 0 ; state < trie->uniquecharcount ; state++ )
895 PerlIO_printf( Perl_debug_log, "%.*s", colwidth, "--------");
896 PerlIO_printf( Perl_debug_log, "\n");
898 for( state = 1 ; state < trie->statecount ; state++ ) {
899 const U32 base = trie->states[ state ].trans.base;
901 PerlIO_printf( Perl_debug_log, "%*s#%4"UVXf"|", (int)depth * 2 + 2,"", (UV)state);
903 if ( trie->states[ state ].wordnum ) {
904 PerlIO_printf( Perl_debug_log, " W%4X", trie->states[ state ].wordnum );
906 PerlIO_printf( Perl_debug_log, "%6s", "" );
909 PerlIO_printf( Perl_debug_log, " @%4"UVXf" ", (UV)base );
914 while( ( base + ofs < trie->uniquecharcount ) ||
915 ( base + ofs - trie->uniquecharcount < trie->lasttrans
916 && trie->trans[ base + ofs - trie->uniquecharcount ].check != state))
919 PerlIO_printf( Perl_debug_log, "+%2"UVXf"[ ", (UV)ofs);
921 for ( ofs = 0 ; ofs < trie->uniquecharcount ; ofs++ ) {
922 if ( ( base + ofs >= trie->uniquecharcount ) &&
923 ( base + ofs - trie->uniquecharcount < trie->lasttrans ) &&
924 trie->trans[ base + ofs - trie->uniquecharcount ].check == state )
926 PerlIO_printf( Perl_debug_log, "%*"UVXf,
928 (UV)trie->trans[ base + ofs - trie->uniquecharcount ].next );
930 PerlIO_printf( Perl_debug_log, "%*s",colwidth," ." );
934 PerlIO_printf( Perl_debug_log, "]");
937 PerlIO_printf( Perl_debug_log, "\n" );
941 Dumps a fully constructed but uncompressed trie in list form.
942 List tries normally only are used for construction when the number of
943 possible chars (trie->uniquecharcount) is very high.
944 Used for debugging make_trie().
947 S_dump_trie_interim_list(pTHX_ const struct _reg_trie_data *trie,
948 HV *widecharmap, AV *revcharmap, U32 next_alloc,
952 SV *sv=sv_newmortal();
953 int colwidth= widecharmap ? 6 : 4;
954 GET_RE_DEBUG_FLAGS_DECL;
956 PERL_ARGS_ASSERT_DUMP_TRIE_INTERIM_LIST;
958 /* print out the table precompression. */
959 PerlIO_printf( Perl_debug_log, "%*sState :Word | Transition Data\n%*s%s",
960 (int)depth * 2 + 2,"", (int)depth * 2 + 2,"",
961 "------:-----+-----------------\n" );
963 for( state=1 ; state < next_alloc ; state ++ ) {
966 PerlIO_printf( Perl_debug_log, "%*s %4"UVXf" :",
967 (int)depth * 2 + 2,"", (UV)state );
968 if ( ! trie->states[ state ].wordnum ) {
969 PerlIO_printf( Perl_debug_log, "%5s| ","");
971 PerlIO_printf( Perl_debug_log, "W%4x| ",
972 trie->states[ state ].wordnum
975 for( charid = 1 ; charid <= TRIE_LIST_USED( state ) ; charid++ ) {
976 SV ** const tmp = av_fetch( revcharmap, TRIE_LIST_ITEM(state,charid).forid, 0);
978 PerlIO_printf( Perl_debug_log, "%*s:%3X=%4"UVXf" | ",
980 pv_pretty(sv, SvPV_nolen_const(*tmp), SvCUR(*tmp), colwidth,
981 PL_colors[0], PL_colors[1],
982 (SvUTF8(*tmp) ? PERL_PV_ESCAPE_UNI : 0) |
983 PERL_PV_ESCAPE_FIRSTCHAR
985 TRIE_LIST_ITEM(state,charid).forid,
986 (UV)TRIE_LIST_ITEM(state,charid).newstate
989 PerlIO_printf(Perl_debug_log, "\n%*s| ",
990 (int)((depth * 2) + 14), "");
993 PerlIO_printf( Perl_debug_log, "\n");
998 Dumps a fully constructed but uncompressed trie in table form.
999 This is the normal DFA style state transition table, with a few
1000 twists to facilitate compression later.
1001 Used for debugging make_trie().
1004 S_dump_trie_interim_table(pTHX_ const struct _reg_trie_data *trie,
1005 HV *widecharmap, AV *revcharmap, U32 next_alloc,
1010 SV *sv=sv_newmortal();
1011 int colwidth= widecharmap ? 6 : 4;
1012 GET_RE_DEBUG_FLAGS_DECL;
1014 PERL_ARGS_ASSERT_DUMP_TRIE_INTERIM_TABLE;
1017 print out the table precompression so that we can do a visual check
1018 that they are identical.
1021 PerlIO_printf( Perl_debug_log, "%*sChar : ",(int)depth * 2 + 2,"" );
1023 for( charid = 0 ; charid < trie->uniquecharcount ; charid++ ) {
1024 SV ** const tmp = av_fetch( revcharmap, charid, 0);
1026 PerlIO_printf( Perl_debug_log, "%*s",
1028 pv_pretty(sv, SvPV_nolen_const(*tmp), SvCUR(*tmp), colwidth,
1029 PL_colors[0], PL_colors[1],
1030 (SvUTF8(*tmp) ? PERL_PV_ESCAPE_UNI : 0) |
1031 PERL_PV_ESCAPE_FIRSTCHAR
1037 PerlIO_printf( Perl_debug_log, "\n%*sState+-",(int)depth * 2 + 2,"" );
1039 for( charid=0 ; charid < trie->uniquecharcount ; charid++ ) {
1040 PerlIO_printf( Perl_debug_log, "%.*s", colwidth,"--------");
1043 PerlIO_printf( Perl_debug_log, "\n" );
1045 for( state=1 ; state < next_alloc ; state += trie->uniquecharcount ) {
1047 PerlIO_printf( Perl_debug_log, "%*s%4"UVXf" : ",
1048 (int)depth * 2 + 2,"",
1049 (UV)TRIE_NODENUM( state ) );
1051 for( charid = 0 ; charid < trie->uniquecharcount ; charid++ ) {
1052 UV v=(UV)SAFE_TRIE_NODENUM( trie->trans[ state + charid ].next );
1054 PerlIO_printf( Perl_debug_log, "%*"UVXf, colwidth, v );
1056 PerlIO_printf( Perl_debug_log, "%*s", colwidth, "." );
1058 if ( ! trie->states[ TRIE_NODENUM( state ) ].wordnum ) {
1059 PerlIO_printf( Perl_debug_log, " (%4"UVXf")\n", (UV)trie->trans[ state ].check );
1061 PerlIO_printf( Perl_debug_log, " (%4"UVXf") W%4X\n", (UV)trie->trans[ state ].check,
1062 trie->states[ TRIE_NODENUM( state ) ].wordnum );
1069 /* make_trie(startbranch,first,last,tail,word_count,flags,depth)
1070 startbranch: the first branch in the whole branch sequence
1071 first : start branch of sequence of branch-exact nodes.
1072 May be the same as startbranch
1073 last : Thing following the last branch.
1074 May be the same as tail.
1075 tail : item following the branch sequence
1076 count : words in the sequence
1077 flags : currently the OP() type we will be building one of /EXACT(|F|Fl)/
1078 depth : indent depth
1080 Inplace optimizes a sequence of 2 or more Branch-Exact nodes into a TRIE node.
1082 A trie is an N'ary tree where the branches are determined by digital
1083 decomposition of the key. IE, at the root node you look up the 1st character and
1084 follow that branch repeat until you find the end of the branches. Nodes can be
1085 marked as "accepting" meaning they represent a complete word. Eg:
1089 would convert into the following structure. Numbers represent states, letters
1090 following numbers represent valid transitions on the letter from that state, if
1091 the number is in square brackets it represents an accepting state, otherwise it
1092 will be in parenthesis.
1094 +-h->+-e->[3]-+-r->(8)-+-s->[9]
1098 (1) +-i->(6)-+-s->[7]
1100 +-s->(3)-+-h->(4)-+-e->[5]
1102 Accept Word Mapping: 3=>1 (he),5=>2 (she), 7=>3 (his), 9=>4 (hers)
1104 This shows that when matching against the string 'hers' we will begin at state 1
1105 read 'h' and move to state 2, read 'e' and move to state 3 which is accepting,
1106 then read 'r' and go to state 8 followed by 's' which takes us to state 9 which
1107 is also accepting. Thus we know that we can match both 'he' and 'hers' with a
1108 single traverse. We store a mapping from accepting to state to which word was
1109 matched, and then when we have multiple possibilities we try to complete the
1110 rest of the regex in the order in which they occured in the alternation.
1112 The only prior NFA like behaviour that would be changed by the TRIE support is
1113 the silent ignoring of duplicate alternations which are of the form:
1115 / (DUPE|DUPE) X? (?{ ... }) Y /x
1117 Thus EVAL blocks follwing a trie may be called a different number of times with
1118 and without the optimisation. With the optimisations dupes will be silently
1119 ignored. This inconsistant behaviour of EVAL type nodes is well established as
1120 the following demonstrates:
1122 'words'=~/(word|word|word)(?{ print $1 })[xyz]/
1124 which prints out 'word' three times, but
1126 'words'=~/(word|word|word)(?{ print $1 })S/
1128 which doesnt print it out at all. This is due to other optimisations kicking in.
1130 Example of what happens on a structural level:
1132 The regexp /(ac|ad|ab)+/ will produce the folowing debug output:
1134 1: CURLYM[1] {1,32767}(18)
1145 This would be optimizable with startbranch=5, first=5, last=16, tail=16
1146 and should turn into:
1148 1: CURLYM[1] {1,32767}(18)
1150 [Words:3 Chars Stored:6 Unique Chars:4 States:5 NCP:1]
1158 Cases where tail != last would be like /(?foo|bar)baz/:
1168 which would be optimizable with startbranch=1, first=1, last=7, tail=8
1169 and would end up looking like:
1172 [Words:2 Chars Stored:6 Unique Chars:5 States:7 NCP:1]
1179 d = uvuni_to_utf8_flags(d, uv, 0);
1181 is the recommended Unicode-aware way of saying
1186 #define TRIE_STORE_REVCHAR \
1189 SV *zlopp = newSV(2); \
1190 unsigned char *flrbbbbb = (unsigned char *) SvPVX(zlopp); \
1191 unsigned const char *const kapow = uvuni_to_utf8(flrbbbbb, uvc & 0xFF); \
1192 SvCUR_set(zlopp, kapow - flrbbbbb); \
1195 av_push(revcharmap, zlopp); \
1197 char ooooff = (char)uvc; \
1198 av_push(revcharmap, newSVpvn(&ooooff, 1)); \
1202 #define TRIE_READ_CHAR STMT_START { \
1206 if ( foldlen > 0 ) { \
1207 uvc = utf8n_to_uvuni( scan, UTF8_MAXLEN, &len, uniflags ); \
1212 uvc = utf8n_to_uvuni( (const U8*)uc, UTF8_MAXLEN, &len, uniflags);\
1213 uvc = to_uni_fold( uvc, foldbuf, &foldlen ); \
1214 foldlen -= UNISKIP( uvc ); \
1215 scan = foldbuf + UNISKIP( uvc ); \
1218 uvc = utf8n_to_uvuni( (const U8*)uc, UTF8_MAXLEN, &len, uniflags);\
1228 #define TRIE_LIST_PUSH(state,fid,ns) STMT_START { \
1229 if ( TRIE_LIST_CUR( state ) >=TRIE_LIST_LEN( state ) ) { \
1230 U32 ging = TRIE_LIST_LEN( state ) *= 2; \
1231 Renew( trie->states[ state ].trans.list, ging, reg_trie_trans_le ); \
1233 TRIE_LIST_ITEM( state, TRIE_LIST_CUR( state ) ).forid = fid; \
1234 TRIE_LIST_ITEM( state, TRIE_LIST_CUR( state ) ).newstate = ns; \
1235 TRIE_LIST_CUR( state )++; \
1238 #define TRIE_LIST_NEW(state) STMT_START { \
1239 Newxz( trie->states[ state ].trans.list, \
1240 4, reg_trie_trans_le ); \
1241 TRIE_LIST_CUR( state ) = 1; \
1242 TRIE_LIST_LEN( state ) = 4; \
1245 #define TRIE_HANDLE_WORD(state) STMT_START { \
1246 U16 dupe= trie->states[ state ].wordnum; \
1247 regnode * const noper_next = regnext( noper ); \
1249 if (trie->wordlen) \
1250 trie->wordlen[ curword ] = wordlen; \
1252 /* store the word for dumping */ \
1254 if (OP(noper) != NOTHING) \
1255 tmp = newSVpvn_utf8(STRING(noper), STR_LEN(noper), UTF); \
1257 tmp = newSVpvn_utf8( "", 0, UTF ); \
1258 av_push( trie_words, tmp ); \
1263 if ( noper_next < tail ) { \
1265 trie->jump = (U16 *) PerlMemShared_calloc( word_count + 1, sizeof(U16) ); \
1266 trie->jump[curword] = (U16)(noper_next - convert); \
1268 jumper = noper_next; \
1270 nextbranch= regnext(cur); \
1274 /* So it's a dupe. This means we need to maintain a */\
1275 /* linked-list from the first to the next. */\
1276 /* we only allocate the nextword buffer when there */\
1277 /* a dupe, so first time we have to do the allocation */\
1278 if (!trie->nextword) \
1279 trie->nextword = (U16 *) \
1280 PerlMemShared_calloc( word_count + 1, sizeof(U16)); \
1281 while ( trie->nextword[dupe] ) \
1282 dupe= trie->nextword[dupe]; \
1283 trie->nextword[dupe]= curword; \
1285 /* we haven't inserted this word yet. */ \
1286 trie->states[ state ].wordnum = curword; \
1291 #define TRIE_TRANS_STATE(state,base,ucharcount,charid,special) \
1292 ( ( base + charid >= ucharcount \
1293 && base + charid < ubound \
1294 && state == trie->trans[ base - ucharcount + charid ].check \
1295 && trie->trans[ base - ucharcount + charid ].next ) \
1296 ? trie->trans[ base - ucharcount + charid ].next \
1297 : ( state==1 ? special : 0 ) \
1301 #define MADE_JUMP_TRIE 2
1302 #define MADE_EXACT_TRIE 4
1305 S_make_trie(pTHX_ RExC_state_t *pRExC_state, regnode *startbranch, regnode *first, regnode *last, regnode *tail, U32 word_count, U32 flags, U32 depth)
1308 /* first pass, loop through and scan words */
1309 reg_trie_data *trie;
1310 HV *widecharmap = NULL;
1311 AV *revcharmap = newAV();
1313 const U32 uniflags = UTF8_ALLOW_DEFAULT;
1318 regnode *jumper = NULL;
1319 regnode *nextbranch = NULL;
1320 regnode *convert = NULL;
1321 /* we just use folder as a flag in utf8 */
1322 const U8 * const folder = ( flags == EXACTF
1324 : ( flags == EXACTFL
1331 const U32 data_slot = add_data( pRExC_state, 4, "tuuu" );
1332 AV *trie_words = NULL;
1333 /* along with revcharmap, this only used during construction but both are
1334 * useful during debugging so we store them in the struct when debugging.
1337 const U32 data_slot = add_data( pRExC_state, 2, "tu" );
1338 STRLEN trie_charcount=0;
1340 SV *re_trie_maxbuff;
1341 GET_RE_DEBUG_FLAGS_DECL;
1343 PERL_ARGS_ASSERT_MAKE_TRIE;
1345 PERL_UNUSED_ARG(depth);
1348 trie = (reg_trie_data *) PerlMemShared_calloc( 1, sizeof(reg_trie_data) );
1350 trie->startstate = 1;
1351 trie->wordcount = word_count;
1352 RExC_rxi->data->data[ data_slot ] = (void*)trie;
1353 trie->charmap = (U16 *) PerlMemShared_calloc( 256, sizeof(U16) );
1354 if (!(UTF && folder))
1355 trie->bitmap = (char *) PerlMemShared_calloc( ANYOF_BITMAP_SIZE, 1 );
1357 trie_words = newAV();
1360 re_trie_maxbuff = get_sv(RE_TRIE_MAXBUF_NAME, 1);
1361 if (!SvIOK(re_trie_maxbuff)) {
1362 sv_setiv(re_trie_maxbuff, RE_TRIE_MAXBUF_INIT);
1365 PerlIO_printf( Perl_debug_log,
1366 "%*smake_trie start==%d, first==%d, last==%d, tail==%d depth=%d\n",
1367 (int)depth * 2 + 2, "",
1368 REG_NODE_NUM(startbranch),REG_NODE_NUM(first),
1369 REG_NODE_NUM(last), REG_NODE_NUM(tail),
1373 /* Find the node we are going to overwrite */
1374 if ( first == startbranch && OP( last ) != BRANCH ) {
1375 /* whole branch chain */
1378 /* branch sub-chain */
1379 convert = NEXTOPER( first );
1382 /* -- First loop and Setup --
1384 We first traverse the branches and scan each word to determine if it
1385 contains widechars, and how many unique chars there are, this is
1386 important as we have to build a table with at least as many columns as we
1389 We use an array of integers to represent the character codes 0..255
1390 (trie->charmap) and we use a an HV* to store Unicode characters. We use the
1391 native representation of the character value as the key and IV's for the
1394 *TODO* If we keep track of how many times each character is used we can
1395 remap the columns so that the table compression later on is more
1396 efficient in terms of memory by ensuring most common value is in the
1397 middle and the least common are on the outside. IMO this would be better
1398 than a most to least common mapping as theres a decent chance the most
1399 common letter will share a node with the least common, meaning the node
1400 will not be compressable. With a middle is most common approach the worst
1401 case is when we have the least common nodes twice.
1405 for ( cur = first ; cur < last ; cur = regnext( cur ) ) {
1406 regnode * const noper = NEXTOPER( cur );
1407 const U8 *uc = (U8*)STRING( noper );
1408 const U8 * const e = uc + STR_LEN( noper );
1410 U8 foldbuf[ UTF8_MAXBYTES_CASE + 1 ];
1411 const U8 *scan = (U8*)NULL;
1412 U32 wordlen = 0; /* required init */
1414 bool set_bit = trie->bitmap ? 1 : 0; /*store the first char in the bitmap?*/
1416 if (OP(noper) == NOTHING) {
1420 if ( set_bit ) /* bitmap only alloced when !(UTF&&Folding) */
1421 TRIE_BITMAP_SET(trie,*uc); /* store the raw first byte
1422 regardless of encoding */
1424 for ( ; uc < e ; uc += len ) {
1425 TRIE_CHARCOUNT(trie)++;
1429 if ( !trie->charmap[ uvc ] ) {
1430 trie->charmap[ uvc ]=( ++trie->uniquecharcount );
1432 trie->charmap[ folder[ uvc ] ] = trie->charmap[ uvc ];
1436 /* store the codepoint in the bitmap, and if its ascii
1437 also store its folded equivelent. */
1438 TRIE_BITMAP_SET(trie,uvc);
1440 /* store the folded codepoint */
1441 if ( folder ) TRIE_BITMAP_SET(trie,folder[ uvc ]);
1444 /* store first byte of utf8 representation of
1445 codepoints in the 127 < uvc < 256 range */
1446 if (127 < uvc && uvc < 192) {
1447 TRIE_BITMAP_SET(trie,194);
1448 } else if (191 < uvc ) {
1449 TRIE_BITMAP_SET(trie,195);
1450 /* && uvc < 256 -- we know uvc is < 256 already */
1453 set_bit = 0; /* We've done our bit :-) */
1458 widecharmap = newHV();
1460 svpp = hv_fetch( widecharmap, (char*)&uvc, sizeof( UV ), 1 );
1463 Perl_croak( aTHX_ "error creating/fetching widecharmap entry for 0x%"UVXf, uvc );
1465 if ( !SvTRUE( *svpp ) ) {
1466 sv_setiv( *svpp, ++trie->uniquecharcount );
1471 if( cur == first ) {
1474 } else if (chars < trie->minlen) {
1476 } else if (chars > trie->maxlen) {
1480 } /* end first pass */
1481 DEBUG_TRIE_COMPILE_r(
1482 PerlIO_printf( Perl_debug_log, "%*sTRIE(%s): W:%d C:%d Uq:%d Min:%d Max:%d\n",
1483 (int)depth * 2 + 2,"",
1484 ( widecharmap ? "UTF8" : "NATIVE" ), (int)word_count,
1485 (int)TRIE_CHARCOUNT(trie), trie->uniquecharcount,
1486 (int)trie->minlen, (int)trie->maxlen )
1488 trie->wordlen = (U32 *) PerlMemShared_calloc( word_count, sizeof(U32) );
1491 We now know what we are dealing with in terms of unique chars and
1492 string sizes so we can calculate how much memory a naive
1493 representation using a flat table will take. If it's over a reasonable
1494 limit (as specified by ${^RE_TRIE_MAXBUF}) we use a more memory
1495 conservative but potentially much slower representation using an array
1498 At the end we convert both representations into the same compressed
1499 form that will be used in regexec.c for matching with. The latter
1500 is a form that cannot be used to construct with but has memory
1501 properties similar to the list form and access properties similar
1502 to the table form making it both suitable for fast searches and
1503 small enough that its feasable to store for the duration of a program.
1505 See the comment in the code where the compressed table is produced
1506 inplace from the flat tabe representation for an explanation of how
1507 the compression works.
1512 if ( (IV)( ( TRIE_CHARCOUNT(trie) + 1 ) * trie->uniquecharcount + 1) > SvIV(re_trie_maxbuff) ) {
1514 Second Pass -- Array Of Lists Representation
1516 Each state will be represented by a list of charid:state records
1517 (reg_trie_trans_le) the first such element holds the CUR and LEN
1518 points of the allocated array. (See defines above).
1520 We build the initial structure using the lists, and then convert
1521 it into the compressed table form which allows faster lookups
1522 (but cant be modified once converted).
1525 STRLEN transcount = 1;
1527 DEBUG_TRIE_COMPILE_MORE_r( PerlIO_printf( Perl_debug_log,
1528 "%*sCompiling trie using list compiler\n",
1529 (int)depth * 2 + 2, ""));
1531 trie->states = (reg_trie_state *)
1532 PerlMemShared_calloc( TRIE_CHARCOUNT(trie) + 2,
1533 sizeof(reg_trie_state) );
1537 for ( cur = first ; cur < last ; cur = regnext( cur ) ) {
1539 regnode * const noper = NEXTOPER( cur );
1540 U8 *uc = (U8*)STRING( noper );
1541 const U8 * const e = uc + STR_LEN( noper );
1542 U32 state = 1; /* required init */
1543 U16 charid = 0; /* sanity init */
1544 U8 *scan = (U8*)NULL; /* sanity init */
1545 STRLEN foldlen = 0; /* required init */
1546 U32 wordlen = 0; /* required init */
1547 U8 foldbuf[ UTF8_MAXBYTES_CASE + 1 ];
1549 if (OP(noper) != NOTHING) {
1550 for ( ; uc < e ; uc += len ) {
1555 charid = trie->charmap[ uvc ];
1557 SV** const svpp = hv_fetch( widecharmap, (char*)&uvc, sizeof( UV ), 0);
1561 charid=(U16)SvIV( *svpp );
1564 /* charid is now 0 if we dont know the char read, or nonzero if we do */
1571 if ( !trie->states[ state ].trans.list ) {
1572 TRIE_LIST_NEW( state );
1574 for ( check = 1; check <= TRIE_LIST_USED( state ); check++ ) {
1575 if ( TRIE_LIST_ITEM( state, check ).forid == charid ) {
1576 newstate = TRIE_LIST_ITEM( state, check ).newstate;
1581 newstate = next_alloc++;
1582 TRIE_LIST_PUSH( state, charid, newstate );
1587 Perl_croak( aTHX_ "panic! In trie construction, no char mapping for %"IVdf, uvc );
1591 TRIE_HANDLE_WORD(state);
1593 } /* end second pass */
1595 /* next alloc is the NEXT state to be allocated */
1596 trie->statecount = next_alloc;
1597 trie->states = (reg_trie_state *)
1598 PerlMemShared_realloc( trie->states,
1600 * sizeof(reg_trie_state) );
1602 /* and now dump it out before we compress it */
1603 DEBUG_TRIE_COMPILE_MORE_r(dump_trie_interim_list(trie, widecharmap,
1604 revcharmap, next_alloc,
1608 trie->trans = (reg_trie_trans *)
1609 PerlMemShared_calloc( transcount, sizeof(reg_trie_trans) );
1616 for( state=1 ; state < next_alloc ; state ++ ) {
1620 DEBUG_TRIE_COMPILE_MORE_r(
1621 PerlIO_printf( Perl_debug_log, "tp: %d zp: %d ",tp,zp)
1625 if (trie->states[state].trans.list) {
1626 U16 minid=TRIE_LIST_ITEM( state, 1).forid;
1630 for( idx = 2 ; idx <= TRIE_LIST_USED( state ) ; idx++ ) {
1631 const U16 forid = TRIE_LIST_ITEM( state, idx).forid;
1632 if ( forid < minid ) {
1634 } else if ( forid > maxid ) {
1638 if ( transcount < tp + maxid - minid + 1) {
1640 trie->trans = (reg_trie_trans *)
1641 PerlMemShared_realloc( trie->trans,
1643 * sizeof(reg_trie_trans) );
1644 Zero( trie->trans + (transcount / 2), transcount / 2 , reg_trie_trans );
1646 base = trie->uniquecharcount + tp - minid;
1647 if ( maxid == minid ) {
1649 for ( ; zp < tp ; zp++ ) {
1650 if ( ! trie->trans[ zp ].next ) {
1651 base = trie->uniquecharcount + zp - minid;
1652 trie->trans[ zp ].next = TRIE_LIST_ITEM( state, 1).newstate;
1653 trie->trans[ zp ].check = state;
1659 trie->trans[ tp ].next = TRIE_LIST_ITEM( state, 1).newstate;
1660 trie->trans[ tp ].check = state;
1665 for ( idx=1; idx <= TRIE_LIST_USED( state ) ; idx++ ) {
1666 const U32 tid = base - trie->uniquecharcount + TRIE_LIST_ITEM( state, idx ).forid;
1667 trie->trans[ tid ].next = TRIE_LIST_ITEM( state, idx ).newstate;
1668 trie->trans[ tid ].check = state;
1670 tp += ( maxid - minid + 1 );
1672 Safefree(trie->states[ state ].trans.list);
1675 DEBUG_TRIE_COMPILE_MORE_r(
1676 PerlIO_printf( Perl_debug_log, " base: %d\n",base);
1679 trie->states[ state ].trans.base=base;
1681 trie->lasttrans = tp + 1;
1685 Second Pass -- Flat Table Representation.
1687 we dont use the 0 slot of either trans[] or states[] so we add 1 to each.
1688 We know that we will need Charcount+1 trans at most to store the data
1689 (one row per char at worst case) So we preallocate both structures
1690 assuming worst case.
1692 We then construct the trie using only the .next slots of the entry
1695 We use the .check field of the first entry of the node temporarily to
1696 make compression both faster and easier by keeping track of how many non
1697 zero fields are in the node.
1699 Since trans are numbered from 1 any 0 pointer in the table is a FAIL
1702 There are two terms at use here: state as a TRIE_NODEIDX() which is a
1703 number representing the first entry of the node, and state as a
1704 TRIE_NODENUM() which is the trans number. state 1 is TRIE_NODEIDX(1) and
1705 TRIE_NODENUM(1), state 2 is TRIE_NODEIDX(2) and TRIE_NODENUM(3) if there
1706 are 2 entrys per node. eg:
1714 The table is internally in the right hand, idx form. However as we also
1715 have to deal with the states array which is indexed by nodenum we have to
1716 use TRIE_NODENUM() to convert.
1719 DEBUG_TRIE_COMPILE_MORE_r( PerlIO_printf( Perl_debug_log,
1720 "%*sCompiling trie using table compiler\n",
1721 (int)depth * 2 + 2, ""));
1723 trie->trans = (reg_trie_trans *)
1724 PerlMemShared_calloc( ( TRIE_CHARCOUNT(trie) + 1 )
1725 * trie->uniquecharcount + 1,
1726 sizeof(reg_trie_trans) );
1727 trie->states = (reg_trie_state *)
1728 PerlMemShared_calloc( TRIE_CHARCOUNT(trie) + 2,
1729 sizeof(reg_trie_state) );
1730 next_alloc = trie->uniquecharcount + 1;
1733 for ( cur = first ; cur < last ; cur = regnext( cur ) ) {
1735 regnode * const noper = NEXTOPER( cur );
1736 const U8 *uc = (U8*)STRING( noper );
1737 const U8 * const e = uc + STR_LEN( noper );
1739 U32 state = 1; /* required init */
1741 U16 charid = 0; /* sanity init */
1742 U32 accept_state = 0; /* sanity init */
1743 U8 *scan = (U8*)NULL; /* sanity init */
1745 STRLEN foldlen = 0; /* required init */
1746 U32 wordlen = 0; /* required init */
1747 U8 foldbuf[ UTF8_MAXBYTES_CASE + 1 ];
1749 if ( OP(noper) != NOTHING ) {
1750 for ( ; uc < e ; uc += len ) {
1755 charid = trie->charmap[ uvc ];
1757 SV* const * const svpp = hv_fetch( widecharmap, (char*)&uvc, sizeof( UV ), 0);
1758 charid = svpp ? (U16)SvIV(*svpp) : 0;
1762 if ( !trie->trans[ state + charid ].next ) {
1763 trie->trans[ state + charid ].next = next_alloc;
1764 trie->trans[ state ].check++;
1765 next_alloc += trie->uniquecharcount;
1767 state = trie->trans[ state + charid ].next;
1769 Perl_croak( aTHX_ "panic! In trie construction, no char mapping for %"IVdf, uvc );
1771 /* charid is now 0 if we dont know the char read, or nonzero if we do */
1774 accept_state = TRIE_NODENUM( state );
1775 TRIE_HANDLE_WORD(accept_state);
1777 } /* end second pass */
1779 /* and now dump it out before we compress it */
1780 DEBUG_TRIE_COMPILE_MORE_r(dump_trie_interim_table(trie, widecharmap,
1782 next_alloc, depth+1));
1786 * Inplace compress the table.*
1788 For sparse data sets the table constructed by the trie algorithm will
1789 be mostly 0/FAIL transitions or to put it another way mostly empty.
1790 (Note that leaf nodes will not contain any transitions.)
1792 This algorithm compresses the tables by eliminating most such
1793 transitions, at the cost of a modest bit of extra work during lookup:
1795 - Each states[] entry contains a .base field which indicates the
1796 index in the state[] array wheres its transition data is stored.
1798 - If .base is 0 there are no valid transitions from that node.
1800 - If .base is nonzero then charid is added to it to find an entry in
1803 -If trans[states[state].base+charid].check!=state then the
1804 transition is taken to be a 0/Fail transition. Thus if there are fail
1805 transitions at the front of the node then the .base offset will point
1806 somewhere inside the previous nodes data (or maybe even into a node
1807 even earlier), but the .check field determines if the transition is
1811 The following process inplace converts the table to the compressed
1812 table: We first do not compress the root node 1,and mark its all its
1813 .check pointers as 1 and set its .base pointer as 1 as well. This
1814 allows to do a DFA construction from the compressed table later, and
1815 ensures that any .base pointers we calculate later are greater than
1818 - We set 'pos' to indicate the first entry of the second node.
1820 - We then iterate over the columns of the node, finding the first and
1821 last used entry at l and m. We then copy l..m into pos..(pos+m-l),
1822 and set the .check pointers accordingly, and advance pos
1823 appropriately and repreat for the next node. Note that when we copy
1824 the next pointers we have to convert them from the original
1825 NODEIDX form to NODENUM form as the former is not valid post
1828 - If a node has no transitions used we mark its base as 0 and do not
1829 advance the pos pointer.
1831 - If a node only has one transition we use a second pointer into the
1832 structure to fill in allocated fail transitions from other states.
1833 This pointer is independent of the main pointer and scans forward
1834 looking for null transitions that are allocated to a state. When it
1835 finds one it writes the single transition into the "hole". If the
1836 pointer doesnt find one the single transition is appended as normal.
1838 - Once compressed we can Renew/realloc the structures to release the
1841 See "Table-Compression Methods" in sec 3.9 of the Red Dragon,
1842 specifically Fig 3.47 and the associated pseudocode.
1846 const U32 laststate = TRIE_NODENUM( next_alloc );
1849 trie->statecount = laststate;
1851 for ( state = 1 ; state < laststate ; state++ ) {
1853 const U32 stateidx = TRIE_NODEIDX( state );
1854 const U32 o_used = trie->trans[ stateidx ].check;
1855 U32 used = trie->trans[ stateidx ].check;
1856 trie->trans[ stateidx ].check = 0;
1858 for ( charid = 0 ; used && charid < trie->uniquecharcount ; charid++ ) {
1859 if ( flag || trie->trans[ stateidx + charid ].next ) {
1860 if ( trie->trans[ stateidx + charid ].next ) {
1862 for ( ; zp < pos ; zp++ ) {
1863 if ( ! trie->trans[ zp ].next ) {
1867 trie->states[ state ].trans.base = zp + trie->uniquecharcount - charid ;
1868 trie->trans[ zp ].next = SAFE_TRIE_NODENUM( trie->trans[ stateidx + charid ].next );
1869 trie->trans[ zp ].check = state;
1870 if ( ++zp > pos ) pos = zp;
1877 trie->states[ state ].trans.base = pos + trie->uniquecharcount - charid ;
1879 trie->trans[ pos ].next = SAFE_TRIE_NODENUM( trie->trans[ stateidx + charid ].next );
1880 trie->trans[ pos ].check = state;
1885 trie->lasttrans = pos + 1;
1886 trie->states = (reg_trie_state *)
1887 PerlMemShared_realloc( trie->states, laststate
1888 * sizeof(reg_trie_state) );
1889 DEBUG_TRIE_COMPILE_MORE_r(
1890 PerlIO_printf( Perl_debug_log,
1891 "%*sAlloc: %d Orig: %"IVdf" elements, Final:%"IVdf". Savings of %%%5.2f\n",
1892 (int)depth * 2 + 2,"",
1893 (int)( ( TRIE_CHARCOUNT(trie) + 1 ) * trie->uniquecharcount + 1 ),
1896 ( ( next_alloc - pos ) * 100 ) / (double)next_alloc );
1899 } /* end table compress */
1901 DEBUG_TRIE_COMPILE_MORE_r(
1902 PerlIO_printf(Perl_debug_log, "%*sStatecount:%"UVxf" Lasttrans:%"UVxf"\n",
1903 (int)depth * 2 + 2, "",
1904 (UV)trie->statecount,
1905 (UV)trie->lasttrans)
1907 /* resize the trans array to remove unused space */
1908 trie->trans = (reg_trie_trans *)
1909 PerlMemShared_realloc( trie->trans, trie->lasttrans
1910 * sizeof(reg_trie_trans) );
1912 /* and now dump out the compressed format */
1913 DEBUG_TRIE_COMPILE_r(dump_trie(trie, widecharmap, revcharmap, depth+1));
1915 { /* Modify the program and insert the new TRIE node*/
1916 U8 nodetype =(U8)(flags & 0xFF);
1920 regnode *optimize = NULL;
1921 #ifdef RE_TRACK_PATTERN_OFFSETS
1924 U32 mjd_nodelen = 0;
1925 #endif /* RE_TRACK_PATTERN_OFFSETS */
1926 #endif /* DEBUGGING */
1928 This means we convert either the first branch or the first Exact,
1929 depending on whether the thing following (in 'last') is a branch
1930 or not and whther first is the startbranch (ie is it a sub part of
1931 the alternation or is it the whole thing.)
1932 Assuming its a sub part we conver the EXACT otherwise we convert
1933 the whole branch sequence, including the first.
1935 /* Find the node we are going to overwrite */
1936 if ( first != startbranch || OP( last ) == BRANCH ) {
1937 /* branch sub-chain */
1938 NEXT_OFF( first ) = (U16)(last - first);
1939 #ifdef RE_TRACK_PATTERN_OFFSETS
1941 mjd_offset= Node_Offset((convert));
1942 mjd_nodelen= Node_Length((convert));
1945 /* whole branch chain */
1947 #ifdef RE_TRACK_PATTERN_OFFSETS
1950 const regnode *nop = NEXTOPER( convert );
1951 mjd_offset= Node_Offset((nop));
1952 mjd_nodelen= Node_Length((nop));
1956 PerlIO_printf(Perl_debug_log, "%*sMJD offset:%"UVuf" MJD length:%"UVuf"\n",
1957 (int)depth * 2 + 2, "",
1958 (UV)mjd_offset, (UV)mjd_nodelen)
1961 /* But first we check to see if there is a common prefix we can
1962 split out as an EXACT and put in front of the TRIE node. */
1963 trie->startstate= 1;
1964 if ( trie->bitmap && !widecharmap && !trie->jump ) {
1966 for ( state = 1 ; state < trie->statecount-1 ; state++ ) {
1970 const U32 base = trie->states[ state ].trans.base;
1972 if ( trie->states[state].wordnum )
1975 for ( ofs = 0 ; ofs < trie->uniquecharcount ; ofs++ ) {
1976 if ( ( base + ofs >= trie->uniquecharcount ) &&
1977 ( base + ofs - trie->uniquecharcount < trie->lasttrans ) &&
1978 trie->trans[ base + ofs - trie->uniquecharcount ].check == state )
1980 if ( ++count > 1 ) {
1981 SV **tmp = av_fetch( revcharmap, ofs, 0);
1982 const U8 *ch = (U8*)SvPV_nolen_const( *tmp );
1983 if ( state == 1 ) break;
1985 Zero(trie->bitmap, ANYOF_BITMAP_SIZE, char);
1987 PerlIO_printf(Perl_debug_log,
1988 "%*sNew Start State=%"UVuf" Class: [",
1989 (int)depth * 2 + 2, "",
1992 SV ** const tmp = av_fetch( revcharmap, idx, 0);
1993 const U8 * const ch = (U8*)SvPV_nolen_const( *tmp );
1995 TRIE_BITMAP_SET(trie,*ch);
1997 TRIE_BITMAP_SET(trie, folder[ *ch ]);
1999 PerlIO_printf(Perl_debug_log, (char*)ch)
2003 TRIE_BITMAP_SET(trie,*ch);
2005 TRIE_BITMAP_SET(trie,folder[ *ch ]);
2006 DEBUG_OPTIMISE_r(PerlIO_printf( Perl_debug_log,"%s", ch));
2012 SV **tmp = av_fetch( revcharmap, idx, 0);
2014 char *ch = SvPV( *tmp, len );
2016 SV *sv=sv_newmortal();
2017 PerlIO_printf( Perl_debug_log,
2018 "%*sPrefix State: %"UVuf" Idx:%"UVuf" Char='%s'\n",
2019 (int)depth * 2 + 2, "",
2021 pv_pretty(sv, SvPV_nolen_const(*tmp), SvCUR(*tmp), 6,
2022 PL_colors[0], PL_colors[1],
2023 (SvUTF8(*tmp) ? PERL_PV_ESCAPE_UNI : 0) |
2024 PERL_PV_ESCAPE_FIRSTCHAR
2029 OP( convert ) = nodetype;
2030 str=STRING(convert);
2033 STR_LEN(convert) += len;
2039 DEBUG_OPTIMISE_r(PerlIO_printf( Perl_debug_log,"]\n"));
2045 regnode *n = convert+NODE_SZ_STR(convert);
2046 NEXT_OFF(convert) = NODE_SZ_STR(convert);
2047 trie->startstate = state;
2048 trie->minlen -= (state - 1);
2049 trie->maxlen -= (state - 1);
2051 /* At least the UNICOS C compiler choked on this
2052 * being argument to DEBUG_r(), so let's just have
2055 #ifdef PERL_EXT_RE_BUILD
2061 regnode *fix = convert;
2062 U32 word = trie->wordcount;
2064 Set_Node_Offset_Length(convert, mjd_offset, state - 1);
2065 while( ++fix < n ) {
2066 Set_Node_Offset_Length(fix, 0, 0);
2069 SV ** const tmp = av_fetch( trie_words, word, 0 );
2071 if ( STR_LEN(convert) <= SvCUR(*tmp) )
2072 sv_chop(*tmp, SvPV_nolen(*tmp) + STR_LEN(convert));
2074 sv_chop(*tmp, SvPV_nolen(*tmp) + SvCUR(*tmp));
2082 NEXT_OFF(convert) = (U16)(tail - convert);
2083 DEBUG_r(optimize= n);
2089 if ( trie->maxlen ) {
2090 NEXT_OFF( convert ) = (U16)(tail - convert);
2091 ARG_SET( convert, data_slot );
2092 /* Store the offset to the first unabsorbed branch in
2093 jump[0], which is otherwise unused by the jump logic.
2094 We use this when dumping a trie and during optimisation. */
2096 trie->jump[0] = (U16)(nextbranch - convert);
2099 if ( !trie->states[trie->startstate].wordnum && trie->bitmap &&
2100 ( (char *)jumper - (char *)convert) >= (int)sizeof(struct regnode_charclass) )
2102 OP( convert ) = TRIEC;
2103 Copy(trie->bitmap, ((struct regnode_charclass *)convert)->bitmap, ANYOF_BITMAP_SIZE, char);
2104 PerlMemShared_free(trie->bitmap);
2107 OP( convert ) = TRIE;
2109 /* store the type in the flags */
2110 convert->flags = nodetype;
2114 + regarglen[ OP( convert ) ];
2116 /* XXX We really should free up the resource in trie now,
2117 as we won't use them - (which resources?) dmq */
2119 /* needed for dumping*/
2120 DEBUG_r(if (optimize) {
2121 regnode *opt = convert;
2123 while ( ++opt < optimize) {
2124 Set_Node_Offset_Length(opt,0,0);
2127 Try to clean up some of the debris left after the
2130 while( optimize < jumper ) {
2131 mjd_nodelen += Node_Length((optimize));
2132 OP( optimize ) = OPTIMIZED;
2133 Set_Node_Offset_Length(optimize,0,0);
2136 Set_Node_Offset_Length(convert,mjd_offset,mjd_nodelen);
2138 } /* end node insert */
2139 RExC_rxi->data->data[ data_slot + 1 ] = (void*)widecharmap;
2141 RExC_rxi->data->data[ data_slot + TRIE_WORDS_OFFSET ] = (void*)trie_words;
2142 RExC_rxi->data->data[ data_slot + 3 ] = (void*)revcharmap;
2144 SvREFCNT_dec(revcharmap);
2148 : trie->startstate>1
2154 S_make_trie_failtable(pTHX_ RExC_state_t *pRExC_state, regnode *source, regnode *stclass, U32 depth)
2156 /* The Trie is constructed and compressed now so we can build a fail array now if its needed
2158 This is basically the Aho-Corasick algorithm. Its from exercise 3.31 and 3.32 in the
2159 "Red Dragon" -- Compilers, principles, techniques, and tools. Aho, Sethi, Ullman 1985/88
2162 We find the fail state for each state in the trie, this state is the longest proper
2163 suffix of the current states 'word' that is also a proper prefix of another word in our
2164 trie. State 1 represents the word '' and is the thus the default fail state. This allows
2165 the DFA not to have to restart after its tried and failed a word at a given point, it
2166 simply continues as though it had been matching the other word in the first place.
2168 'abcdgu'=~/abcdefg|cdgu/
2169 When we get to 'd' we are still matching the first word, we would encounter 'g' which would
2170 fail, which would bring use to the state representing 'd' in the second word where we would
2171 try 'g' and succeed, prodceding to match 'cdgu'.
2173 /* add a fail transition */
2174 const U32 trie_offset = ARG(source);
2175 reg_trie_data *trie=(reg_trie_data *)RExC_rxi->data->data[trie_offset];
2177 const U32 ucharcount = trie->uniquecharcount;
2178 const U32 numstates = trie->statecount;
2179 const U32 ubound = trie->lasttrans + ucharcount;
2183 U32 base = trie->states[ 1 ].trans.base;
2186 const U32 data_slot = add_data( pRExC_state, 1, "T" );
2187 GET_RE_DEBUG_FLAGS_DECL;
2189 PERL_ARGS_ASSERT_MAKE_TRIE_FAILTABLE;
2191 PERL_UNUSED_ARG(depth);
2195 ARG_SET( stclass, data_slot );
2196 aho = (reg_ac_data *) PerlMemShared_calloc( 1, sizeof(reg_ac_data) );
2197 RExC_rxi->data->data[ data_slot ] = (void*)aho;
2198 aho->trie=trie_offset;
2199 aho->states=(reg_trie_state *)PerlMemShared_malloc( numstates * sizeof(reg_trie_state) );
2200 Copy( trie->states, aho->states, numstates, reg_trie_state );
2201 Newxz( q, numstates, U32);
2202 aho->fail = (U32 *) PerlMemShared_calloc( numstates, sizeof(U32) );
2205 /* initialize fail[0..1] to be 1 so that we always have
2206 a valid final fail state */
2207 fail[ 0 ] = fail[ 1 ] = 1;
2209 for ( charid = 0; charid < ucharcount ; charid++ ) {
2210 const U32 newstate = TRIE_TRANS_STATE( 1, base, ucharcount, charid, 0 );
2212 q[ q_write ] = newstate;
2213 /* set to point at the root */
2214 fail[ q[ q_write++ ] ]=1;
2217 while ( q_read < q_write) {
2218 const U32 cur = q[ q_read++ % numstates ];
2219 base = trie->states[ cur ].trans.base;
2221 for ( charid = 0 ; charid < ucharcount ; charid++ ) {
2222 const U32 ch_state = TRIE_TRANS_STATE( cur, base, ucharcount, charid, 1 );
2224 U32 fail_state = cur;
2227 fail_state = fail[ fail_state ];
2228 fail_base = aho->states[ fail_state ].trans.base;
2229 } while ( !TRIE_TRANS_STATE( fail_state, fail_base, ucharcount, charid, 1 ) );
2231 fail_state = TRIE_TRANS_STATE( fail_state, fail_base, ucharcount, charid, 1 );
2232 fail[ ch_state ] = fail_state;
2233 if ( !aho->states[ ch_state ].wordnum && aho->states[ fail_state ].wordnum )
2235 aho->states[ ch_state ].wordnum = aho->states[ fail_state ].wordnum;
2237 q[ q_write++ % numstates] = ch_state;
2241 /* restore fail[0..1] to 0 so that we "fall out" of the AC loop
2242 when we fail in state 1, this allows us to use the
2243 charclass scan to find a valid start char. This is based on the principle
2244 that theres a good chance the string being searched contains lots of stuff
2245 that cant be a start char.
2247 fail[ 0 ] = fail[ 1 ] = 0;
2248 DEBUG_TRIE_COMPILE_r({
2249 PerlIO_printf(Perl_debug_log,
2250 "%*sStclass Failtable (%"UVuf" states): 0",
2251 (int)(depth * 2), "", (UV)numstates
2253 for( q_read=1; q_read<numstates; q_read++ ) {
2254 PerlIO_printf(Perl_debug_log, ", %"UVuf, (UV)fail[q_read]);
2256 PerlIO_printf(Perl_debug_log, "\n");
2259 /*RExC_seen |= REG_SEEN_TRIEDFA;*/
2264 * There are strange code-generation bugs caused on sparc64 by gcc-2.95.2.
2265 * These need to be revisited when a newer toolchain becomes available.
2267 #if defined(__sparc64__) && defined(__GNUC__)
2268 # if __GNUC__ < 2 || (__GNUC__ == 2 && __GNUC_MINOR__ < 96)
2269 # undef SPARC64_GCC_WORKAROUND
2270 # define SPARC64_GCC_WORKAROUND 1
2274 #define DEBUG_PEEP(str,scan,depth) \
2275 DEBUG_OPTIMISE_r({if (scan){ \
2276 SV * const mysv=sv_newmortal(); \
2277 regnode *Next = regnext(scan); \
2278 regprop(RExC_rx, mysv, scan); \
2279 PerlIO_printf(Perl_debug_log, "%*s" str ">%3d: %s (%d)\n", \
2280 (int)depth*2, "", REG_NODE_NUM(scan), SvPV_nolen_const(mysv),\
2281 Next ? (REG_NODE_NUM(Next)) : 0 ); \
2288 #define JOIN_EXACT(scan,min,flags) \
2289 if (PL_regkind[OP(scan)] == EXACT) \
2290 join_exact(pRExC_state,(scan),(min),(flags),NULL,depth+1)
2293 S_join_exact(pTHX_ RExC_state_t *pRExC_state, regnode *scan, I32 *min, U32 flags,regnode *val, U32 depth) {
2294 /* Merge several consecutive EXACTish nodes into one. */
2295 regnode *n = regnext(scan);
2297 regnode *next = scan + NODE_SZ_STR(scan);
2301 regnode *stop = scan;
2302 GET_RE_DEBUG_FLAGS_DECL;
2304 PERL_UNUSED_ARG(depth);
2307 PERL_ARGS_ASSERT_JOIN_EXACT;
2308 #ifndef EXPERIMENTAL_INPLACESCAN
2309 PERL_UNUSED_ARG(flags);
2310 PERL_UNUSED_ARG(val);
2312 DEBUG_PEEP("join",scan,depth);
2314 /* Skip NOTHING, merge EXACT*. */
2316 ( PL_regkind[OP(n)] == NOTHING ||
2317 (stringok && (OP(n) == OP(scan))))
2319 && NEXT_OFF(scan) + NEXT_OFF(n) < I16_MAX) {
2321 if (OP(n) == TAIL || n > next)
2323 if (PL_regkind[OP(n)] == NOTHING) {
2324 DEBUG_PEEP("skip:",n,depth);
2325 NEXT_OFF(scan) += NEXT_OFF(n);
2326 next = n + NODE_STEP_REGNODE;
2333 else if (stringok) {
2334 const unsigned int oldl = STR_LEN(scan);
2335 regnode * const nnext = regnext(n);
2337 DEBUG_PEEP("merg",n,depth);
2340 if (oldl + STR_LEN(n) > U8_MAX)
2342 NEXT_OFF(scan) += NEXT_OFF(n);
2343 STR_LEN(scan) += STR_LEN(n);
2344 next = n + NODE_SZ_STR(n);
2345 /* Now we can overwrite *n : */
2346 Move(STRING(n), STRING(scan) + oldl, STR_LEN(n), char);
2354 #ifdef EXPERIMENTAL_INPLACESCAN
2355 if (flags && !NEXT_OFF(n)) {
2356 DEBUG_PEEP("atch", val, depth);
2357 if (reg_off_by_arg[OP(n)]) {
2358 ARG_SET(n, val - n);
2361 NEXT_OFF(n) = val - n;
2368 if (UTF && ( OP(scan) == EXACTF ) && ( STR_LEN(scan) >= 6 ) ) {
2370 Two problematic code points in Unicode casefolding of EXACT nodes:
2372 U+0390 - GREEK SMALL LETTER IOTA WITH DIALYTIKA AND TONOS
2373 U+03B0 - GREEK SMALL LETTER UPSILON WITH DIALYTIKA AND TONOS
2379 U+03B9 U+0308 U+0301 0xCE 0xB9 0xCC 0x88 0xCC 0x81
2380 U+03C5 U+0308 U+0301 0xCF 0x85 0xCC 0x88 0xCC 0x81
2382 This means that in case-insensitive matching (or "loose matching",
2383 as Unicode calls it), an EXACTF of length six (the UTF-8 encoded byte
2384 length of the above casefolded versions) can match a target string
2385 of length two (the byte length of UTF-8 encoded U+0390 or U+03B0).
2386 This would rather mess up the minimum length computation.
2388 What we'll do is to look for the tail four bytes, and then peek
2389 at the preceding two bytes to see whether we need to decrease
2390 the minimum length by four (six minus two).
2392 Thanks to the design of UTF-8, there cannot be false matches:
2393 A sequence of valid UTF-8 bytes cannot be a subsequence of
2394 another valid sequence of UTF-8 bytes.
2397 char * const s0 = STRING(scan), *s, *t;
2398 char * const s1 = s0 + STR_LEN(scan) - 1;
2399 char * const s2 = s1 - 4;
2400 #ifdef EBCDIC /* RD tunifold greek 0390 and 03B0 */
2401 const char t0[] = "\xaf\x49\xaf\x42";
2403 const char t0[] = "\xcc\x88\xcc\x81";
2405 const char * const t1 = t0 + 3;
2408 s < s2 && (t = ninstr(s, s1, t0, t1));
2411 if (((U8)t[-1] == 0x68 && (U8)t[-2] == 0xB4) ||
2412 ((U8)t[-1] == 0x46 && (U8)t[-2] == 0xB5))
2414 if (((U8)t[-1] == 0xB9 && (U8)t[-2] == 0xCE) ||
2415 ((U8)t[-1] == 0x85 && (U8)t[-2] == 0xCF))
2423 n = scan + NODE_SZ_STR(scan);
2425 if (PL_regkind[OP(n)] != NOTHING || OP(n) == NOTHING) {
2432 DEBUG_OPTIMISE_r(if (merged){DEBUG_PEEP("finl",scan,depth)});
2436 /* REx optimizer. Converts nodes into quickier variants "in place".
2437 Finds fixed substrings. */
2439 /* Stops at toplevel WHILEM as well as at "last". At end *scanp is set
2440 to the position after last scanned or to NULL. */
2442 #define INIT_AND_WITHP \
2443 assert(!and_withp); \
2444 Newx(and_withp,1,struct regnode_charclass_class); \
2445 SAVEFREEPV(and_withp)
2447 /* this is a chain of data about sub patterns we are processing that
2448 need to be handled seperately/specially in study_chunk. Its so
2449 we can simulate recursion without losing state. */
2451 typedef struct scan_frame {
2452 regnode *last; /* last node to process in this frame */
2453 regnode *next; /* next node to process when last is reached */
2454 struct scan_frame *prev; /*previous frame*/
2455 I32 stop; /* what stopparen do we use */
2459 #define SCAN_COMMIT(s, data, m) scan_commit(s, data, m, is_inf)
2461 #define CASE_SYNST_FNC(nAmE) \
2463 if (flags & SCF_DO_STCLASS_AND) { \
2464 for (value = 0; value < 256; value++) \
2465 if (!is_ ## nAmE ## _cp(value)) \
2466 ANYOF_BITMAP_CLEAR(data->start_class, value); \
2469 for (value = 0; value < 256; value++) \
2470 if (is_ ## nAmE ## _cp(value)) \
2471 ANYOF_BITMAP_SET(data->start_class, value); \
2475 if (flags & SCF_DO_STCLASS_AND) { \
2476 for (value = 0; value < 256; value++) \
2477 if (is_ ## nAmE ## _cp(value)) \
2478 ANYOF_BITMAP_CLEAR(data->start_class, value); \
2481 for (value = 0; value < 256; value++) \
2482 if (!is_ ## nAmE ## _cp(value)) \
2483 ANYOF_BITMAP_SET(data->start_class, value); \
2490 S_study_chunk(pTHX_ RExC_state_t *pRExC_state, regnode **scanp,
2491 I32 *minlenp, I32 *deltap,
2496 struct regnode_charclass_class *and_withp,
2497 U32 flags, U32 depth)
2498 /* scanp: Start here (read-write). */
2499 /* deltap: Write maxlen-minlen here. */
2500 /* last: Stop before this one. */
2501 /* data: string data about the pattern */
2502 /* stopparen: treat close N as END */
2503 /* recursed: which subroutines have we recursed into */
2504 /* and_withp: Valid if flags & SCF_DO_STCLASS_OR */
2507 I32 min = 0, pars = 0, code;
2508 regnode *scan = *scanp, *next;
2510 int is_inf = (flags & SCF_DO_SUBSTR) && (data->flags & SF_IS_INF);
2511 int is_inf_internal = 0; /* The studied chunk is infinite */
2512 I32 is_par = OP(scan) == OPEN ? ARG(scan) : 0;
2513 scan_data_t data_fake;
2514 SV *re_trie_maxbuff = NULL;
2515 regnode *first_non_open = scan;
2516 I32 stopmin = I32_MAX;
2517 scan_frame *frame = NULL;
2518 GET_RE_DEBUG_FLAGS_DECL;
2520 PERL_ARGS_ASSERT_STUDY_CHUNK;
2523 StructCopy(&zero_scan_data, &data_fake, scan_data_t);
2527 while (first_non_open && OP(first_non_open) == OPEN)
2528 first_non_open=regnext(first_non_open);
2533 while ( scan && OP(scan) != END && scan < last ){
2534 /* Peephole optimizer: */
2535 DEBUG_STUDYDATA("Peep:", data,depth);
2536 DEBUG_PEEP("Peep",scan,depth);
2537 JOIN_EXACT(scan,&min,0);
2539 /* Follow the next-chain of the current node and optimize
2540 away all the NOTHINGs from it. */
2541 if (OP(scan) != CURLYX) {
2542 const int max = (reg_off_by_arg[OP(scan)]
2544 /* I32 may be smaller than U16 on CRAYs! */
2545 : (I32_MAX < U16_MAX ? I32_MAX : U16_MAX));
2546 int off = (reg_off_by_arg[OP(scan)] ? ARG(scan) : NEXT_OFF(scan));
2550 /* Skip NOTHING and LONGJMP. */
2551 while ((n = regnext(n))
2552 && ((PL_regkind[OP(n)] == NOTHING && (noff = NEXT_OFF(n)))
2553 || ((OP(n) == LONGJMP) && (noff = ARG(n))))
2554 && off + noff < max)
2556 if (reg_off_by_arg[OP(scan)])
2559 NEXT_OFF(scan) = off;
2564 /* The principal pseudo-switch. Cannot be a switch, since we
2565 look into several different things. */
2566 if (OP(scan) == BRANCH || OP(scan) == BRANCHJ
2567 || OP(scan) == IFTHEN) {
2568 next = regnext(scan);
2570 /* demq: the op(next)==code check is to see if we have "branch-branch" AFAICT */
2572 if (OP(next) == code || code == IFTHEN) {
2573 /* NOTE - There is similar code to this block below for handling
2574 TRIE nodes on a re-study. If you change stuff here check there
2576 I32 max1 = 0, min1 = I32_MAX, num = 0;
2577 struct regnode_charclass_class accum;
2578 regnode * const startbranch=scan;
2580 if (flags & SCF_DO_SUBSTR)
2581 SCAN_COMMIT(pRExC_state, data, minlenp); /* Cannot merge strings after this. */
2582 if (flags & SCF_DO_STCLASS)
2583 cl_init_zero(pRExC_state, &accum);
2585 while (OP(scan) == code) {
2586 I32 deltanext, minnext, f = 0, fake;
2587 struct regnode_charclass_class this_class;
2590 data_fake.flags = 0;
2592 data_fake.whilem_c = data->whilem_c;
2593 data_fake.last_closep = data->last_closep;
2596 data_fake.last_closep = &fake;
2598 data_fake.pos_delta = delta;
2599 next = regnext(scan);
2600 scan = NEXTOPER(scan);
2602 scan = NEXTOPER(scan);
2603 if (flags & SCF_DO_STCLASS) {
2604 cl_init(pRExC_state, &this_class);
2605 data_fake.start_class = &this_class;
2606 f = SCF_DO_STCLASS_AND;
2608 if (flags & SCF_WHILEM_VISITED_POS)
2609 f |= SCF_WHILEM_VISITED_POS;
2611 /* we suppose the run is continuous, last=next...*/
2612 minnext = study_chunk(pRExC_state, &scan, minlenp, &deltanext,
2614 stopparen, recursed, NULL, f,depth+1);
2617 if (max1 < minnext + deltanext)
2618 max1 = minnext + deltanext;
2619 if (deltanext == I32_MAX)
2620 is_inf = is_inf_internal = 1;
2622 if (data_fake.flags & (SF_HAS_PAR|SF_IN_PAR))
2624 if (data_fake.flags & SCF_SEEN_ACCEPT) {
2625 if ( stopmin > minnext)
2626 stopmin = min + min1;
2627 flags &= ~SCF_DO_SUBSTR;
2629 data->flags |= SCF_SEEN_ACCEPT;
2632 if (data_fake.flags & SF_HAS_EVAL)
2633 data->flags |= SF_HAS_EVAL;
2634 data->whilem_c = data_fake.whilem_c;
2636 if (flags & SCF_DO_STCLASS)
2637 cl_or(pRExC_state, &accum, &this_class);
2639 if (code == IFTHEN && num < 2) /* Empty ELSE branch */
2641 if (flags & SCF_DO_SUBSTR) {
2642 data->pos_min += min1;
2643 data->pos_delta += max1 - min1;
2644 if (max1 != min1 || is_inf)
2645 data->longest = &(data->longest_float);
2648 delta += max1 - min1;
2649 if (flags & SCF_DO_STCLASS_OR) {
2650 cl_or(pRExC_state, data->start_class, &accum);
2652 cl_and(data->start_class, and_withp);
2653 flags &= ~SCF_DO_STCLASS;
2656 else if (flags & SCF_DO_STCLASS_AND) {
2658 cl_and(data->start_class, &accum);
2659 flags &= ~SCF_DO_STCLASS;
2662 /* Switch to OR mode: cache the old value of
2663 * data->start_class */
2665 StructCopy(data->start_class, and_withp,
2666 struct regnode_charclass_class);
2667 flags &= ~SCF_DO_STCLASS_AND;
2668 StructCopy(&accum, data->start_class,
2669 struct regnode_charclass_class);
2670 flags |= SCF_DO_STCLASS_OR;
2671 data->start_class->flags |= ANYOF_EOS;
2675 if (PERL_ENABLE_TRIE_OPTIMISATION && OP( startbranch ) == BRANCH ) {
2678 Assuming this was/is a branch we are dealing with: 'scan' now
2679 points at the item that follows the branch sequence, whatever
2680 it is. We now start at the beginning of the sequence and look
2687 which would be constructed from a pattern like /A|LIST|OF|WORDS/
2689 If we can find such a subseqence we need to turn the first
2690 element into a trie and then add the subsequent branch exact
2691 strings to the trie.
2695 1. patterns where the whole set of branch can be converted.
2697 2. patterns where only a subset can be converted.
2699 In case 1 we can replace the whole set with a single regop
2700 for the trie. In case 2 we need to keep the start and end
2703 'BRANCH EXACT; BRANCH EXACT; BRANCH X'
2704 becomes BRANCH TRIE; BRANCH X;
2706 There is an additional case, that being where there is a
2707 common prefix, which gets split out into an EXACT like node
2708 preceding the TRIE node.
2710 If x(1..n)==tail then we can do a simple trie, if not we make
2711 a "jump" trie, such that when we match the appropriate word
2712 we "jump" to the appopriate tail node. Essentailly we turn
2713 a nested if into a case structure of sorts.
2718 if (!re_trie_maxbuff) {
2719 re_trie_maxbuff = get_sv(RE_TRIE_MAXBUF_NAME, 1);
2720 if (!SvIOK(re_trie_maxbuff))
2721 sv_setiv(re_trie_maxbuff, RE_TRIE_MAXBUF_INIT);
2723 if ( SvIV(re_trie_maxbuff)>=0 ) {
2725 regnode *first = (regnode *)NULL;
2726 regnode *last = (regnode *)NULL;
2727 regnode *tail = scan;
2732 SV * const mysv = sv_newmortal(); /* for dumping */
2734 /* var tail is used because there may be a TAIL
2735 regop in the way. Ie, the exacts will point to the
2736 thing following the TAIL, but the last branch will
2737 point at the TAIL. So we advance tail. If we
2738 have nested (?:) we may have to move through several
2742 while ( OP( tail ) == TAIL ) {
2743 /* this is the TAIL generated by (?:) */
2744 tail = regnext( tail );
2749 regprop(RExC_rx, mysv, tail );
2750 PerlIO_printf( Perl_debug_log, "%*s%s%s\n",
2751 (int)depth * 2 + 2, "",
2752 "Looking for TRIE'able sequences. Tail node is: ",
2753 SvPV_nolen_const( mysv )
2759 step through the branches, cur represents each
2760 branch, noper is the first thing to be matched
2761 as part of that branch and noper_next is the
2762 regnext() of that node. if noper is an EXACT
2763 and noper_next is the same as scan (our current
2764 position in the regex) then the EXACT branch is
2765 a possible optimization target. Once we have
2766 two or more consequetive such branches we can
2767 create a trie of the EXACT's contents and stich
2768 it in place. If the sequence represents all of
2769 the branches we eliminate the whole thing and
2770 replace it with a single TRIE. If it is a
2771 subsequence then we need to stitch it in. This
2772 means the first branch has to remain, and needs
2773 to be repointed at the item on the branch chain
2774 following the last branch optimized. This could
2775 be either a BRANCH, in which case the
2776 subsequence is internal, or it could be the
2777 item following the branch sequence in which
2778 case the subsequence is at the end.
2782 /* dont use tail as the end marker for this traverse */
2783 for ( cur = startbranch ; cur != scan ; cur = regnext( cur ) ) {
2784 regnode * const noper = NEXTOPER( cur );
2785 #if defined(DEBUGGING) || defined(NOJUMPTRIE)
2786 regnode * const noper_next = regnext( noper );
2790 regprop(RExC_rx, mysv, cur);
2791 PerlIO_printf( Perl_debug_log, "%*s- %s (%d)",
2792 (int)depth * 2 + 2,"", SvPV_nolen_const( mysv ), REG_NODE_NUM(cur) );
2794 regprop(RExC_rx, mysv, noper);
2795 PerlIO_printf( Perl_debug_log, " -> %s",
2796 SvPV_nolen_const(mysv));
2799 regprop(RExC_rx, mysv, noper_next );
2800 PerlIO_printf( Perl_debug_log,"\t=> %s\t",
2801 SvPV_nolen_const(mysv));
2803 PerlIO_printf( Perl_debug_log, "(First==%d,Last==%d,Cur==%d)\n",
2804 REG_NODE_NUM(first), REG_NODE_NUM(last), REG_NODE_NUM(cur) );
2806 if ( (((first && optype!=NOTHING) ? OP( noper ) == optype
2807 : PL_regkind[ OP( noper ) ] == EXACT )
2808 || OP(noper) == NOTHING )
2810 && noper_next == tail
2815 if ( !first || optype == NOTHING ) {
2816 if (!first) first = cur;
2817 optype = OP( noper );
2823 Currently we assume that the trie can handle unicode and ascii
2824 matches fold cased matches. If this proves true then the following
2825 define will prevent tries in this situation.
2827 #define TRIE_TYPE_IS_SAFE (UTF || optype==EXACT)
2829 #define TRIE_TYPE_IS_SAFE 1
2830 if ( last && TRIE_TYPE_IS_SAFE ) {
2831 make_trie( pRExC_state,
2832 startbranch, first, cur, tail, count,
2835 if ( PL_regkind[ OP( noper ) ] == EXACT
2837 && noper_next == tail
2842 optype = OP( noper );
2852 regprop(RExC_rx, mysv, cur);
2853 PerlIO_printf( Perl_debug_log,
2854 "%*s- %s (%d) <SCAN FINISHED>\n", (int)depth * 2 + 2,
2855 "", SvPV_nolen_const( mysv ),REG_NODE_NUM(cur));
2859 if ( last && TRIE_TYPE_IS_SAFE ) {
2860 made= make_trie( pRExC_state, startbranch, first, scan, tail, count, optype, depth+1 );
2861 #ifdef TRIE_STUDY_OPT
2862 if ( ((made == MADE_EXACT_TRIE &&
2863 startbranch == first)
2864 || ( first_non_open == first )) &&
2866 flags |= SCF_TRIE_RESTUDY;
2867 if ( startbranch == first
2870 RExC_seen &=~REG_TOP_LEVEL_BRANCHES;
2880 else if ( code == BRANCHJ ) { /* single branch is optimized. */
2881 scan = NEXTOPER(NEXTOPER(scan));
2882 } else /* single branch is optimized. */
2883 scan = NEXTOPER(scan);
2885 } else if (OP(scan) == SUSPEND || OP(scan) == GOSUB || OP(scan) == GOSTART) {
2886 scan_frame *newframe = NULL;
2891 if (OP(scan) != SUSPEND) {
2892 /* set the pointer */
2893 if (OP(scan) == GOSUB) {
2895 RExC_recurse[ARG2L(scan)] = scan;
2896 start = RExC_open_parens[paren-1];
2897 end = RExC_close_parens[paren-1];
2900 start = RExC_rxi->program + 1;
2904 Newxz(recursed, (((RExC_npar)>>3) +1), U8);
2905 SAVEFREEPV(recursed);
2907 if (!PAREN_TEST(recursed,paren+1)) {
2908 PAREN_SET(recursed,paren+1);
2909 Newx(newframe,1,scan_frame);
2911 if (flags & SCF_DO_SUBSTR) {
2912 SCAN_COMMIT(pRExC_state,data,minlenp);
2913 data->longest = &(data->longest_float);
2915 is_inf = is_inf_internal = 1;
2916 if (flags & SCF_DO_STCLASS_OR) /* Allow everything */
2917 cl_anything(pRExC_state, data->start_class);
2918 flags &= ~SCF_DO_STCLASS;
2921 Newx(newframe,1,scan_frame);
2924 end = regnext(scan);
2929 SAVEFREEPV(newframe);
2930 newframe->next = regnext(scan);
2931 newframe->last = last;
2932 newframe->stop = stopparen;
2933 newframe->prev = frame;
2943 else if (OP(scan) == EXACT) {
2944 I32 l = STR_LEN(scan);
2947 const U8 * const s = (U8*)STRING(scan);
2948 l = utf8_length(s, s + l);
2949 uc = utf8_to_uvchr(s, NULL);
2951 uc = *((U8*)STRING(scan));
2954 if (flags & SCF_DO_SUBSTR) { /* Update longest substr. */
2955 /* The code below prefers earlier match for fixed
2956 offset, later match for variable offset. */
2957 if (data->last_end == -1) { /* Update the start info. */
2958 data->last_start_min = data->pos_min;
2959 data->last_start_max = is_inf
2960 ? I32_MAX : data->pos_min + data->pos_delta;
2962 sv_catpvn(data->last_found, STRING(scan), STR_LEN(scan));
2964 SvUTF8_on(data->last_found);
2966 SV * const sv = data->last_found;
2967 MAGIC * const mg = SvUTF8(sv) && SvMAGICAL(sv) ?
2968 mg_find(sv, PERL_MAGIC_utf8) : NULL;
2969 if (mg && mg->mg_len >= 0)
2970 mg->mg_len += utf8_length((U8*)STRING(scan),
2971 (U8*)STRING(scan)+STR_LEN(scan));
2973 data->last_end = data->pos_min + l;
2974 data->pos_min += l; /* As in the first entry. */
2975 data->flags &= ~SF_BEFORE_EOL;
2977 if (flags & SCF_DO_STCLASS_AND) {
2978 /* Check whether it is compatible with what we know already! */
2982 (!(data->start_class->flags & (ANYOF_CLASS | ANYOF_LOCALE))
2983 && !ANYOF_BITMAP_TEST(data->start_class, uc)
2984 && (!(data->start_class->flags & ANYOF_FOLD)
2985 || !ANYOF_BITMAP_TEST(data->start_class, PL_fold[uc])))
2988 ANYOF_CLASS_ZERO(data->start_class);
2989 ANYOF_BITMAP_ZERO(data->start_class);
2991 ANYOF_BITMAP_SET(data->start_class, uc);
2992 data->start_class->flags &= ~ANYOF_EOS;
2994 data->start_class->flags &= ~ANYOF_UNICODE_ALL;
2996 else if (flags & SCF_DO_STCLASS_OR) {
2997 /* false positive possible if the class is case-folded */
2999 ANYOF_BITMAP_SET(data->start_class, uc);
3001 data->start_class->flags |= ANYOF_UNICODE_ALL;
3002 data->start_class->flags &= ~ANYOF_EOS;
3003 cl_and(data->start_class, and_withp);
3005 flags &= ~SCF_DO_STCLASS;
3007 else if (PL_regkind[OP(scan)] == EXACT) { /* But OP != EXACT! */
3008 I32 l = STR_LEN(scan);
3009 UV uc = *((U8*)STRING(scan));
3011 /* Search for fixed substrings supports EXACT only. */
3012 if (flags & SCF_DO_SUBSTR) {
3014 SCAN_COMMIT(pRExC_state, data, minlenp);
3017 const U8 * const s = (U8 *)STRING(scan);
3018 l = utf8_length(s, s + l);
3019 uc = utf8_to_uvchr(s, NULL);
3022 if (flags & SCF_DO_SUBSTR)
3024 if (flags & SCF_DO_STCLASS_AND) {
3025 /* Check whether it is compatible with what we know already! */
3029 (!(data->start_class->flags & (ANYOF_CLASS | ANYOF_LOCALE))
3030 && !ANYOF_BITMAP_TEST(data->start_class, uc)
3031 && !ANYOF_BITMAP_TEST(data->start_class, PL_fold[uc])))
3033 ANYOF_CLASS_ZERO(data->start_class);
3034 ANYOF_BITMAP_ZERO(data->start_class);
3036 ANYOF_BITMAP_SET(data->start_class, uc);
3037 data->start_class->flags &= ~ANYOF_EOS;
3038 data->start_class->flags |= ANYOF_FOLD;
3039 if (OP(scan) == EXACTFL)
3040 data->start_class->flags |= ANYOF_LOCALE;
3043 else if (flags & SCF_DO_STCLASS_OR) {
3044 if (data->start_class->flags & ANYOF_FOLD) {
3045 /* false positive possible if the class is case-folded.
3046 Assume that the locale settings are the same... */
3048 ANYOF_BITMAP_SET(data->start_class, uc);
3049 data->start_class->flags &= ~ANYOF_EOS;
3051 cl_and(data->start_class, and_withp);
3053 flags &= ~SCF_DO_STCLASS;
3055 else if (strchr((const char*)PL_varies,OP(scan))) {
3056 I32 mincount, maxcount, minnext, deltanext, fl = 0;
3057 I32 f = flags, pos_before = 0;
3058 regnode * const oscan = scan;
3059 struct regnode_charclass_class this_class;
3060 struct regnode_charclass_class *oclass = NULL;
3061 I32 next_is_eval = 0;
3063 switch (PL_regkind[OP(scan)]) {
3064 case WHILEM: /* End of (?:...)* . */
3065 scan = NEXTOPER(scan);
3068 if (flags & (SCF_DO_SUBSTR | SCF_DO_STCLASS)) {
3069 next = NEXTOPER(scan);
3070 if (OP(next) == EXACT || (flags & SCF_DO_STCLASS)) {
3072 maxcount = REG_INFTY;
3073 next = regnext(scan);
3074 scan = NEXTOPER(scan);
3078 if (flags & SCF_DO_SUBSTR)
3083 if (flags & SCF_DO_STCLASS) {
3085 maxcount = REG_INFTY;
3086 next = regnext(scan);
3087 scan = NEXTOPER(scan);
3090 is_inf = is_inf_internal = 1;
3091 scan = regnext(scan);
3092 if (flags & SCF_DO_SUBSTR) {
3093 SCAN_COMMIT(pRExC_state, data, minlenp); /* Cannot extend fixed substrings */
3094 data->longest = &(data->longest_float);
3096 goto optimize_curly_tail;
3098 if (stopparen>0 && (OP(scan)==CURLYN || OP(scan)==CURLYM)
3099 && (scan->flags == stopparen))
3104 mincount = ARG1(scan);
3105 maxcount = ARG2(scan);
3107 next = regnext(scan);
3108 if (OP(scan) == CURLYX) {
3109 I32 lp = (data ? *(data->last_closep) : 0);
3110 scan->flags = ((lp <= (I32)U8_MAX) ? (U8)lp : U8_MAX);
3112 scan = NEXTOPER(scan) + EXTRA_STEP_2ARGS;
3113 next_is_eval = (OP(scan) == EVAL);
3115 if (flags & SCF_DO_SUBSTR) {
3116 if (mincount == 0) SCAN_COMMIT(pRExC_state,data,minlenp); /* Cannot extend fixed substrings */
3117 pos_before = data->pos_min;
3121 data->flags &= ~(SF_HAS_PAR|SF_IN_PAR|SF_HAS_EVAL);
3123 data->flags |= SF_IS_INF;
3125 if (flags & SCF_DO_STCLASS) {
3126 cl_init(pRExC_state, &this_class);
3127 oclass = data->start_class;
3128 data->start_class = &this_class;
3129 f |= SCF_DO_STCLASS_AND;
3130 f &= ~SCF_DO_STCLASS_OR;
3132 /* These are the cases when once a subexpression
3133 fails at a particular position, it cannot succeed
3134 even after backtracking at the enclosing scope.
3136 XXXX what if minimal match and we are at the
3137 initial run of {n,m}? */
3138 if ((mincount != maxcount - 1) && (maxcount != REG_INFTY))
3139 f &= ~SCF_WHILEM_VISITED_POS;
3141 /* This will finish on WHILEM, setting scan, or on NULL: */
3142 minnext = study_chunk(pRExC_state, &scan, minlenp, &deltanext,
3143 last, data, stopparen, recursed, NULL,
3145 ? (f & ~SCF_DO_SUBSTR) : f),depth+1);
3147 if (flags & SCF_DO_STCLASS)
3148 data->start_class = oclass;
3149 if (mincount == 0 || minnext == 0) {
3150 if (flags & SCF_DO_STCLASS_OR) {
3151 cl_or(pRExC_state, data->start_class, &this_class);
3153 else if (flags & SCF_DO_STCLASS_AND) {
3154 /* Switch to OR mode: cache the old value of
3155 * data->start_class */
3157 StructCopy(data->start_class, and_withp,
3158 struct regnode_charclass_class);
3159 flags &= ~SCF_DO_STCLASS_AND;
3160 StructCopy(&this_class, data->start_class,
3161 struct regnode_charclass_class);
3162 flags |= SCF_DO_STCLASS_OR;
3163 data->start_class->flags |= ANYOF_EOS;
3165 } else { /* Non-zero len */
3166 if (flags & SCF_DO_STCLASS_OR) {
3167 cl_or(pRExC_state, data->start_class, &this_class);
3168 cl_and(data->start_class, and_withp);
3170 else if (flags & SCF_DO_STCLASS_AND)
3171 cl_and(data->start_class, &this_class);
3172 flags &= ~SCF_DO_STCLASS;
3174 if (!scan) /* It was not CURLYX, but CURLY. */
3176 if ( /* ? quantifier ok, except for (?{ ... }) */
3177 (next_is_eval || !(mincount == 0 && maxcount == 1))
3178 && (minnext == 0) && (deltanext == 0)
3179 && data && !(data->flags & (SF_HAS_PAR|SF_IN_PAR))
3180 && maxcount <= REG_INFTY/3 /* Complement check for big count */
3181 && ckWARN(WARN_REGEXP))
3184 "Quantifier unexpected on zero-length expression");
3187 min += minnext * mincount;
3188 is_inf_internal |= ((maxcount == REG_INFTY
3189 && (minnext + deltanext) > 0)
3190 || deltanext == I32_MAX);
3191 is_inf |= is_inf_internal;
3192 delta += (minnext + deltanext) * maxcount - minnext * mincount;
3194 /* Try powerful optimization CURLYX => CURLYN. */
3195 if ( OP(oscan) == CURLYX && data
3196 && data->flags & SF_IN_PAR
3197 && !(data->flags & SF_HAS_EVAL)
3198 && !deltanext && minnext == 1 ) {
3199 /* Try to optimize to CURLYN. */
3200 regnode *nxt = NEXTOPER(oscan) + EXTRA_STEP_2ARGS;
3201 regnode * const nxt1 = nxt;
3208 if (!strchr((const char*)PL_simple,OP(nxt))
3209 && !(PL_regkind[OP(nxt)] == EXACT
3210 && STR_LEN(nxt) == 1))
3216 if (OP(nxt) != CLOSE)
3218 if (RExC_open_parens) {
3219 RExC_open_parens[ARG(nxt1)-1]=oscan; /*open->CURLYM*/
3220 RExC_close_parens[ARG(nxt1)-1]=nxt+2; /*close->while*/
3222 /* Now we know that nxt2 is the only contents: */
3223 oscan->flags = (U8)ARG(nxt);
3225 OP(nxt1) = NOTHING; /* was OPEN. */
3228 OP(nxt1 + 1) = OPTIMIZED; /* was count. */
3229 NEXT_OFF(nxt1+ 1) = 0; /* just for consistancy. */
3230 NEXT_OFF(nxt2) = 0; /* just for consistancy with CURLY. */
3231 OP(nxt) = OPTIMIZED; /* was CLOSE. */
3232 OP(nxt + 1) = OPTIMIZED; /* was count. */
3233 NEXT_OFF(nxt+ 1) = 0; /* just for consistancy. */
3238 /* Try optimization CURLYX => CURLYM. */
3239 if ( OP(oscan) == CURLYX && data
3240 && !(data->flags & SF_HAS_PAR)
3241 && !(data->flags & SF_HAS_EVAL)
3242 && !deltanext /* atom is fixed width */
3243 && minnext != 0 /* CURLYM can't handle zero width */
3245 /* XXXX How to optimize if data == 0? */
3246 /* Optimize to a simpler form. */
3247 regnode *nxt = NEXTOPER(oscan) + EXTRA_STEP_2ARGS; /* OPEN */
3251 while ( (nxt2 = regnext(nxt)) /* skip over embedded stuff*/
3252 && (OP(nxt2) != WHILEM))
3254 OP(nxt2) = SUCCEED; /* Whas WHILEM */
3255 /* Need to optimize away parenths. */
3256 if (data->flags & SF_IN_PAR) {
3257 /* Set the parenth number. */
3258 regnode *nxt1 = NEXTOPER(oscan) + EXTRA_STEP_2ARGS; /* OPEN*/
3260 if (OP(nxt) != CLOSE)
3261 FAIL("Panic opt close");
3262 oscan->flags = (U8)ARG(nxt);
3263 if (RExC_open_parens) {
3264 RExC_open_parens[ARG(nxt1)-1]=oscan; /*open->CURLYM*/
3265 RExC_close_parens[ARG(nxt1)-1]=nxt2+1; /*close->NOTHING*/
3267 OP(nxt1) = OPTIMIZED; /* was OPEN. */
3268 OP(nxt) = OPTIMIZED; /* was CLOSE. */
3271 OP(nxt1 + 1) = OPTIMIZED; /* was count. */
3272 OP(nxt + 1) = OPTIMIZED; /* was count. */
3273 NEXT_OFF(nxt1 + 1) = 0; /* just for consistancy. */
3274 NEXT_OFF(nxt + 1) = 0; /* just for consistancy. */
3277 while ( nxt1 && (OP(nxt1) != WHILEM)) {
3278 regnode *nnxt = regnext(nxt1);
3281 if (reg_off_by_arg[OP(nxt1)])
3282 ARG_SET(nxt1, nxt2 - nxt1);
3283 else if (nxt2 - nxt1 < U16_MAX)
3284 NEXT_OFF(nxt1) = nxt2 - nxt1;
3286 OP(nxt) = NOTHING; /* Cannot beautify */
3291 /* Optimize again: */
3292 study_chunk(pRExC_state, &nxt1, minlenp, &deltanext, nxt,
3293 NULL, stopparen, recursed, NULL, 0,depth+1);
3298 else if ((OP(oscan) == CURLYX)
3299 && (flags & SCF_WHILEM_VISITED_POS)
3300 /* See the comment on a similar expression above.
3301 However, this time it not a subexpression
3302 we care about, but the expression itself. */
3303 && (maxcount == REG_INFTY)
3304 && data && ++data->whilem_c < 16) {
3305 /* This stays as CURLYX, we can put the count/of pair. */
3306 /* Find WHILEM (as in regexec.c) */
3307 regnode *nxt = oscan + NEXT_OFF(oscan);
3309 if (OP(PREVOPER(nxt)) == NOTHING) /* LONGJMP */
3311 PREVOPER(nxt)->flags = (U8)(data->whilem_c
3312 | (RExC_whilem_seen << 4)); /* On WHILEM */
3314 if (data && fl & (SF_HAS_PAR|SF_IN_PAR))
3316 if (flags & SCF_DO_SUBSTR) {
3317 SV *last_str = NULL;
3318 int counted = mincount != 0;
3320 if (data->last_end > 0 && mincount != 0) { /* Ends with a string. */
3321 #if defined(SPARC64_GCC_WORKAROUND)
3324 const char *s = NULL;
3327 if (pos_before >= data->last_start_min)
3330 b = data->last_start_min;
3333 s = SvPV_const(data->last_found, l);
3334 old = b - data->last_start_min;
3337 I32 b = pos_before >= data->last_start_min
3338 ? pos_before : data->last_start_min;
3340 const char * const s = SvPV_const(data->last_found, l);
3341 I32 old = b - data->last_start_min;
3345 old = utf8_hop((U8*)s, old) - (U8*)s;
3348 /* Get the added string: */
3349 last_str = newSVpvn_utf8(s + old, l, UTF);
3350 if (deltanext == 0 && pos_before == b) {
3351 /* What was added is a constant string */
3353 SvGROW(last_str, (mincount * l) + 1);
3354 repeatcpy(SvPVX(last_str) + l,
3355 SvPVX_const(last_str), l, mincount - 1);
3356 SvCUR_set(last_str, SvCUR(last_str) * mincount);
3357 /* Add additional parts. */
3358 SvCUR_set(data->last_found,
3359 SvCUR(data->last_found) - l);
3360 sv_catsv(data->last_found, last_str);
3362 SV * sv = data->last_found;
3364 SvUTF8(sv) && SvMAGICAL(sv) ?
3365 mg_find(sv, PERL_MAGIC_utf8) : NULL;
3366 if (mg && mg->mg_len >= 0)
3367 mg->mg_len += CHR_SVLEN(last_str) - l;
3369 data->last_end += l * (mincount - 1);
3372 /* start offset must point into the last copy */
3373 data->last_start_min += minnext * (mincount - 1);
3374 data->last_start_max += is_inf ? I32_MAX
3375 : (maxcount - 1) * (minnext + data->pos_delta);
3378 /* It is counted once already... */
3379 data->pos_min += minnext * (mincount - counted);
3380 data->pos_delta += - counted * deltanext +
3381 (minnext + deltanext) * maxcount - minnext * mincount;
3382 if (mincount != maxcount) {
3383 /* Cannot extend fixed substrings found inside
3385 SCAN_COMMIT(pRExC_state,data,minlenp);
3386 if (mincount && last_str) {
3387 SV * const sv = data->last_found;
3388 MAGIC * const mg = SvUTF8(sv) && SvMAGICAL(sv) ?
3389 mg_find(sv, PERL_MAGIC_utf8) : NULL;
3393 sv_setsv(sv, last_str);
3394 data->last_end = data->pos_min;
3395 data->last_start_min =
3396 data->pos_min - CHR_SVLEN(last_str);
3397 data->last_start_max = is_inf
3399 : data->pos_min + data->pos_delta
3400 - CHR_SVLEN(last_str);
3402 data->longest = &(data->longest_float);
3404 SvREFCNT_dec(last_str);
3406 if (data && (fl & SF_HAS_EVAL))
3407 data->flags |= SF_HAS_EVAL;
3408 optimize_curly_tail:
3409 if (OP(oscan) != CURLYX) {
3410 while (PL_regkind[OP(next = regnext(oscan))] == NOTHING
3412 NEXT_OFF(oscan) += NEXT_OFF(next);
3415 default: /* REF and CLUMP only? */
3416 if (flags & SCF_DO_SUBSTR) {
3417 SCAN_COMMIT(pRExC_state,data,minlenp); /* Cannot expect anything... */
3418 data->longest = &(data->longest_float);
3420 is_inf = is_inf_internal = 1;
3421 if (flags & SCF_DO_STCLASS_OR)
3422 cl_anything(pRExC_state, data->start_class);
3423 flags &= ~SCF_DO_STCLASS;
3427 else if (OP(scan) == LNBREAK) {
3428 if (flags & SCF_DO_STCLASS) {
3430 data->start_class->flags &= ~ANYOF_EOS; /* No match on empty */
3431 if (flags & SCF_DO_STCLASS_AND) {
3432 for (value = 0; value < 256; value++)
3433 if (!is_VERTWS_cp(value))
3434 ANYOF_BITMAP_CLEAR(data->start_class, value);
3437 for (value = 0; value < 256; value++)
3438 if (is_VERTWS_cp(value))
3439 ANYOF_BITMAP_SET(data->start_class, value);
3441 if (flags & SCF_DO_STCLASS_OR)
3442 cl_and(data->start_class, and_withp);
3443 flags &= ~SCF_DO_STCLASS;
3447 if (flags & SCF_DO_SUBSTR) {
3448 SCAN_COMMIT(pRExC_state,data,minlenp); /* Cannot expect anything... */
3450 data->pos_delta += 1;
3451 data->longest = &(data->longest_float);
3455 else if (OP(scan) == FOLDCHAR) {
3456 int d = ARG(scan)==0xDF ? 1 : 2;
3457 flags &= ~SCF_DO_STCLASS;
3460 if (flags & SCF_DO_SUBSTR) {
3461 SCAN_COMMIT(pRExC_state,data,minlenp); /* Cannot expect anything... */
3463 data->pos_delta += d;
3464 data->longest = &(data->longest_float);
3467 else if (strchr((const char*)PL_simple,OP(scan))) {
3470 if (flags & SCF_DO_SUBSTR) {
3471 SCAN_COMMIT(pRExC_state,data,minlenp);
3475 if (flags & SCF_DO_STCLASS) {
3476 data->start_class->flags &= ~ANYOF_EOS; /* No match on empty */
3478 /* Some of the logic below assumes that switching
3479 locale on will only add false positives. */
3480 switch (PL_regkind[OP(scan)]) {
3484 /* Perl_croak(aTHX_ "panic: unexpected simple REx opcode %d", OP(scan)); */
3485 if (flags & SCF_DO_STCLASS_OR) /* Allow everything */
3486 cl_anything(pRExC_state, data->start_class);
3489 if (OP(scan) == SANY)
3491 if (flags & SCF_DO_STCLASS_OR) { /* Everything but \n */
3492 value = (ANYOF_BITMAP_TEST(data->start_class,'\n')
3493 || (data->start_class->flags & ANYOF_CLASS));
3494 cl_anything(pRExC_state, data->start_class);
3496 if (flags & SCF_DO_STCLASS_AND || !value)
3497 ANYOF_BITMAP_CLEAR(data->start_class,'\n');
3500 if (flags & SCF_DO_STCLASS_AND)
3501 cl_and(data->start_class,
3502 (struct regnode_charclass_class*)scan);
3504 cl_or(pRExC_state, data->start_class,
3505 (struct regnode_charclass_class*)scan);
3508 if (flags & SCF_DO_STCLASS_AND) {
3509 if (!(data->start_class->flags & ANYOF_LOCALE)) {
3510 ANYOF_CLASS_CLEAR(data->start_class,ANYOF_NALNUM);
3511 for (value = 0; value < 256; value++)
3512 if (!isALNUM(value))
3513 ANYOF_BITMAP_CLEAR(data->start_class, value);
3517 if (data->start_class->flags & ANYOF_LOCALE)
3518 ANYOF_CLASS_SET(data->start_class,ANYOF_ALNUM);
3520 for (value = 0; value < 256; value++)
3522 ANYOF_BITMAP_SET(data->start_class, value);
3527 if (flags & SCF_DO_STCLASS_AND) {
3528 if (data->start_class->flags & ANYOF_LOCALE)
3529 ANYOF_CLASS_CLEAR(data->start_class,ANYOF_NALNUM);
3532 ANYOF_CLASS_SET(data->start_class,ANYOF_ALNUM);
3533 data->start_class->flags |= ANYOF_LOCALE;
3537 if (flags & SCF_DO_STCLASS_AND) {
3538 if (!(data->start_class->flags & ANYOF_LOCALE)) {
3539 ANYOF_CLASS_CLEAR(data->start_class,ANYOF_ALNUM);
3540 for (value = 0; value < 256; value++)
3542 ANYOF_BITMAP_CLEAR(data->start_class, value);
3546 if (data->start_class->flags & ANYOF_LOCALE)
3547 ANYOF_CLASS_SET(data->start_class,ANYOF_NALNUM);
3549 for (value = 0; value < 256; value++)
3550 if (!isALNUM(value))
3551 ANYOF_BITMAP_SET(data->start_class, value);
3556 if (flags & SCF_DO_STCLASS_AND) {
3557 if (data->start_class->flags & ANYOF_LOCALE)
3558 ANYOF_CLASS_CLEAR(data->start_class,ANYOF_ALNUM);
3561 data->start_class->flags |= ANYOF_LOCALE;
3562 ANYOF_CLASS_SET(data->start_class,ANYOF_NALNUM);
3566 if (flags & SCF_DO_STCLASS_AND) {
3567 if (!(data->start_class->flags & ANYOF_LOCALE)) {
3568 ANYOF_CLASS_CLEAR(data->start_class,ANYOF_NSPACE);
3569 for (value = 0; value < 256; value++)
3570 if (!isSPACE(value))
3571 ANYOF_BITMAP_CLEAR(data->start_class, value);
3575 if (data->start_class->flags & ANYOF_LOCALE)
3576 ANYOF_CLASS_SET(data->start_class,ANYOF_SPACE);
3578 for (value = 0; value < 256; value++)
3580 ANYOF_BITMAP_SET(data->start_class, value);
3585 if (flags & SCF_DO_STCLASS_AND) {
3586 if (data->start_class->flags & ANYOF_LOCALE)
3587 ANYOF_CLASS_CLEAR(data->start_class,ANYOF_NSPACE);
3590 data->start_class->flags |= ANYOF_LOCALE;
3591 ANYOF_CLASS_SET(data->start_class,ANYOF_SPACE);
3595 if (flags & SCF_DO_STCLASS_AND) {
3596 if (!(data->start_class->flags & ANYOF_LOCALE)) {
3597 ANYOF_CLASS_CLEAR(data->start_class,ANYOF_SPACE);
3598 for (value = 0; value < 256; value++)
3600 ANYOF_BITMAP_CLEAR(data->start_class, value);
3604 if (data->start_class->flags & ANYOF_LOCALE)
3605 ANYOF_CLASS_SET(data->start_class,ANYOF_NSPACE);
3607 for (value = 0; value < 256; value++)
3608 if (!isSPACE(value))
3609 ANYOF_BITMAP_SET(data->start_class, value);
3614 if (flags & SCF_DO_STCLASS_AND) {
3615 if (data->start_class->flags & ANYOF_LOCALE) {
3616 ANYOF_CLASS_CLEAR(data->start_class,ANYOF_SPACE);
3617 for (value = 0; value < 256; value++)
3618 if (!isSPACE(value))
3619 ANYOF_BITMAP_CLEAR(data->start_class, value);
3623 data->start_class->flags |= ANYOF_LOCALE;
3624 ANYOF_CLASS_SET(data->start_class,ANYOF_NSPACE);
3628 if (flags & SCF_DO_STCLASS_AND) {
3629 ANYOF_CLASS_CLEAR(data->start_class,ANYOF_NDIGIT);
3630 for (value = 0; value < 256; value++)
3631 if (!isDIGIT(value))
3632 ANYOF_BITMAP_CLEAR(data->start_class, value);
3635 if (data->start_class->flags & ANYOF_LOCALE)
3636 ANYOF_CLASS_SET(data->start_class,ANYOF_DIGIT);
3638 for (value = 0; value < 256; value++)
3640 ANYOF_BITMAP_SET(data->start_class, value);
3645 if (flags & SCF_DO_STCLASS_AND) {
3646 ANYOF_CLASS_CLEAR(data->start_class,ANYOF_DIGIT);
3647 for (value = 0; value < 256; value++)
3649 ANYOF_BITMAP_CLEAR(data->start_class, value);
3652 if (data->start_class->flags & ANYOF_LOCALE)
3653 ANYOF_CLASS_SET(data->start_class,ANYOF_NDIGIT);
3655 for (value = 0; value < 256; value++)
3656 if (!isDIGIT(value))
3657 ANYOF_BITMAP_SET(data->start_class, value);
3661 CASE_SYNST_FNC(VERTWS);
3662 CASE_SYNST_FNC(HORIZWS);
3665 if (flags & SCF_DO_STCLASS_OR)
3666 cl_and(data->start_class, and_withp);
3667 flags &= ~SCF_DO_STCLASS;
3670 else if (PL_regkind[OP(scan)] == EOL && flags & SCF_DO_SUBSTR) {
3671 data->flags |= (OP(scan) == MEOL
3675 else if ( PL_regkind[OP(scan)] == BRANCHJ
3676 /* Lookbehind, or need to calculate parens/evals/stclass: */
3677 && (scan->flags || data || (flags & SCF_DO_STCLASS))
3678 && (OP(scan) == IFMATCH || OP(scan) == UNLESSM)) {
3679 if ( !PERL_ENABLE_POSITIVE_ASSERTION_STUDY
3680 || OP(scan) == UNLESSM )
3682 /* Negative Lookahead/lookbehind
3683 In this case we can't do fixed string optimisation.
3686 I32 deltanext, minnext, fake = 0;
3688 struct regnode_charclass_class intrnl;
3691 data_fake.flags = 0;
3693 data_fake.whilem_c = data->whilem_c;
3694 data_fake.last_closep = data->last_closep;
3697 data_fake.last_closep = &fake;
3698 data_fake.pos_delta = delta;
3699 if ( flags & SCF_DO_STCLASS && !scan->flags
3700 && OP(scan) == IFMATCH ) { /* Lookahead */
3701 cl_init(pRExC_state, &intrnl);
3702 data_fake.start_class = &intrnl;
3703 f |= SCF_DO_STCLASS_AND;
3705 if (flags & SCF_WHILEM_VISITED_POS)
3706 f |= SCF_WHILEM_VISITED_POS;
3707 next = regnext(scan);
3708 nscan = NEXTOPER(NEXTOPER(scan));
3709 minnext = study_chunk(pRExC_state, &nscan, minlenp, &deltanext,
3710 last, &data_fake, stopparen, recursed, NULL, f, depth+1);
3713 FAIL("Variable length lookbehind not implemented");
3715 else if (minnext > (I32)U8_MAX) {
3716 FAIL2("Lookbehind longer than %"UVuf" not implemented", (UV)U8_MAX);
3718 scan->flags = (U8)minnext;
3721 if (data_fake.flags & (SF_HAS_PAR|SF_IN_PAR))
3723 if (data_fake.flags & SF_HAS_EVAL)
3724 data->flags |= SF_HAS_EVAL;
3725 data->whilem_c = data_fake.whilem_c;
3727 if (f & SCF_DO_STCLASS_AND) {
3728 const int was = (data->start_class->flags & ANYOF_EOS);
3730 cl_and(data->start_class, &intrnl);
3732 data->start_class->flags |= ANYOF_EOS;
3735 #if PERL_ENABLE_POSITIVE_ASSERTION_STUDY
3737 /* Positive Lookahead/lookbehind
3738 In this case we can do fixed string optimisation,
3739 but we must be careful about it. Note in the case of
3740 lookbehind the positions will be offset by the minimum
3741 length of the pattern, something we won't know about
3742 until after the recurse.
3744 I32 deltanext, fake = 0;
3746 struct regnode_charclass_class intrnl;
3748 /* We use SAVEFREEPV so that when the full compile
3749 is finished perl will clean up the allocated
3750 minlens when its all done. This was we don't
3751 have to worry about freeing them when we know
3752 they wont be used, which would be a pain.
3755 Newx( minnextp, 1, I32 );
3756 SAVEFREEPV(minnextp);
3759 StructCopy(data, &data_fake, scan_data_t);
3760 if ((flags & SCF_DO_SUBSTR) && data->last_found) {
3763 SCAN_COMMIT(pRExC_state, &data_fake,minlenp);
3764 data_fake.last_found=newSVsv(data->last_found);
3768 data_fake.last_closep = &fake;
3769 data_fake.flags = 0;
3770 data_fake.pos_delta = delta;
3772 data_fake.flags |= SF_IS_INF;
3773 if ( flags & SCF_DO_STCLASS && !scan->flags
3774 && OP(scan) == IFMATCH ) { /* Lookahead */
3775 cl_init(pRExC_state, &intrnl);
3776 data_fake.start_class = &intrnl;
3777 f |= SCF_DO_STCLASS_AND;
3779 if (flags & SCF_WHILEM_VISITED_POS)
3780 f |= SCF_WHILEM_VISITED_POS;
3781 next = regnext(scan);
3782 nscan = NEXTOPER(NEXTOPER(scan));
3784 *minnextp = study_chunk(pRExC_state, &nscan, minnextp, &deltanext,
3785 last, &data_fake, stopparen, recursed, NULL, f,depth+1);
3788 FAIL("Variable length lookbehind not implemented");
3790 else if (*minnextp > (I32)U8_MAX) {
3791 FAIL2("Lookbehind longer than %"UVuf" not implemented", (UV)U8_MAX);
3793 scan->flags = (U8)*minnextp;
3798 if (f & SCF_DO_STCLASS_AND) {
3799 const int was = (data->start_class->flags & ANYOF_EOS);
3801 cl_and(data->start_class, &intrnl);
3803 data->start_class->flags |= ANYOF_EOS;
3806 if (data_fake.flags & (SF_HAS_PAR|SF_IN_PAR))
3808 if (data_fake.flags & SF_HAS_EVAL)
3809 data->flags |= SF_HAS_EVAL;
3810 data->whilem_c = data_fake.whilem_c;
3811 if ((flags & SCF_DO_SUBSTR) && data_fake.last_found) {
3812 if (RExC_rx->minlen<*minnextp)
3813 RExC_rx->minlen=*minnextp;
3814 SCAN_COMMIT(pRExC_state, &data_fake, minnextp);
3815 SvREFCNT_dec(data_fake.last_found);
3817 if ( data_fake.minlen_fixed != minlenp )
3819 data->offset_fixed= data_fake.offset_fixed;
3820 data->minlen_fixed= data_fake.minlen_fixed;
3821 data->lookbehind_fixed+= scan->flags;
3823 if ( data_fake.minlen_float != minlenp )
3825 data->minlen_float= data_fake.minlen_float;
3826 data->offset_float_min=data_fake.offset_float_min;
3827 data->offset_float_max=data_fake.offset_float_max;
3828 data->lookbehind_float+= scan->flags;
3837 else if (OP(scan) == OPEN) {
3838 if (stopparen != (I32)ARG(scan))
3841 else if (OP(scan) == CLOSE) {
3842 if (stopparen == (I32)ARG(scan)) {
3845 if ((I32)ARG(scan) == is_par) {
3846 next = regnext(scan);
3848 if ( next && (OP(next) != WHILEM) && next < last)
3849 is_par = 0; /* Disable optimization */
3852 *(data->last_closep) = ARG(scan);
3854 else if (OP(scan) == EVAL) {
3856 data->flags |= SF_HAS_EVAL;
3858 else if ( PL_regkind[OP(scan)] == ENDLIKE ) {
3859 if (flags & SCF_DO_SUBSTR) {
3860 SCAN_COMMIT(pRExC_state,data,minlenp);
3861 flags &= ~SCF_DO_SUBSTR;
3863 if (data && OP(scan)==ACCEPT) {
3864 data->flags |= SCF_SEEN_ACCEPT;
3869 else if (OP(scan) == LOGICAL && scan->flags == 2) /* Embedded follows */
3871 if (flags & SCF_DO_SUBSTR) {
3872 SCAN_COMMIT(pRExC_state,data,minlenp);
3873 data->longest = &(data->longest_float);
3875 is_inf = is_inf_internal = 1;
3876 if (flags & SCF_DO_STCLASS_OR) /* Allow everything */
3877 cl_anything(pRExC_state, data->start_class);
3878 flags &= ~SCF_DO_STCLASS;
3880 else if (OP(scan) == GPOS) {
3881 if (!(RExC_rx->extflags & RXf_GPOS_FLOAT) &&
3882 !(delta || is_inf || (data && data->pos_delta)))
3884 if (!(RExC_rx->extflags & RXf_ANCH) && (flags & SCF_DO_SUBSTR))
3885 RExC_rx->extflags |= RXf_ANCH_GPOS;
3886 if (RExC_rx->gofs < (U32)min)
3887 RExC_rx->gofs = min;
3889 RExC_rx->extflags |= RXf_GPOS_FLOAT;
3893 #ifdef TRIE_STUDY_OPT
3894 #ifdef FULL_TRIE_STUDY
3895 else if (PL_regkind[OP(scan)] == TRIE) {
3896 /* NOTE - There is similar code to this block above for handling
3897 BRANCH nodes on the initial study. If you change stuff here
3899 regnode *trie_node= scan;
3900 regnode *tail= regnext(scan);
3901 reg_trie_data *trie = (reg_trie_data*)RExC_rxi->data->data[ ARG(scan) ];
3902 I32 max1 = 0, min1 = I32_MAX;
3903 struct regnode_charclass_class accum;
3905 if (flags & SCF_DO_SUBSTR) /* XXXX Add !SUSPEND? */
3906 SCAN_COMMIT(pRExC_state, data,minlenp); /* Cannot merge strings after this. */
3907 if (flags & SCF_DO_STCLASS)
3908 cl_init_zero(pRExC_state, &accum);
3914 const regnode *nextbranch= NULL;
3917 for ( word=1 ; word <= trie->wordcount ; word++)
3919 I32 deltanext=0, minnext=0, f = 0, fake;
3920 struct regnode_charclass_class this_class;
3922 data_fake.flags = 0;
3924 data_fake.whilem_c = data->whilem_c;
3925 data_fake.last_closep = data->last_closep;
3928 data_fake.last_closep = &fake;
3929 data_fake.pos_delta = delta;
3930 if (flags & SCF_DO_STCLASS) {
3931 cl_init(pRExC_state, &this_class);
3932 data_fake.start_class = &this_class;
3933 f = SCF_DO_STCLASS_AND;
3935 if (flags & SCF_WHILEM_VISITED_POS)
3936 f |= SCF_WHILEM_VISITED_POS;
3938 if (trie->jump[word]) {
3940 nextbranch = trie_node + trie->jump[0];
3941 scan= trie_node + trie->jump[word];
3942 /* We go from the jump point to the branch that follows
3943 it. Note this means we need the vestigal unused branches
3944 even though they arent otherwise used.
3946 minnext = study_chunk(pRExC_state, &scan, minlenp,
3947 &deltanext, (regnode *)nextbranch, &data_fake,
3948 stopparen, recursed, NULL, f,depth+1);
3950 if (nextbranch && PL_regkind[OP(nextbranch)]==BRANCH)
3951 nextbranch= regnext((regnode*)nextbranch);
3953 if (min1 > (I32)(minnext + trie->minlen))
3954 min1 = minnext + trie->minlen;
3955 if (max1 < (I32)(minnext + deltanext + trie->maxlen))
3956 max1 = minnext + deltanext + trie->maxlen;
3957 if (deltanext == I32_MAX)
3958 is_inf = is_inf_internal = 1;
3960 if (data_fake.flags & (SF_HAS_PAR|SF_IN_PAR))
3962 if (data_fake.flags & SCF_SEEN_ACCEPT) {
3963 if ( stopmin > min + min1)
3964 stopmin = min + min1;
3965 flags &= ~SCF_DO_SUBSTR;
3967 data->flags |= SCF_SEEN_ACCEPT;
3970 if (data_fake.flags & SF_HAS_EVAL)
3971 data->flags |= SF_HAS_EVAL;
3972 data->whilem_c = data_fake.whilem_c;
3974 if (flags & SCF_DO_STCLASS)
3975 cl_or(pRExC_state, &accum, &this_class);
3978 if (flags & SCF_DO_SUBSTR) {
3979 data->pos_min += min1;
3980 data->pos_delta += max1 - min1;
3981 if (max1 != min1 || is_inf)
3982 data->longest = &(data->longest_float);
3985 delta += max1 - min1;
3986 if (flags & SCF_DO_STCLASS_OR) {
3987 cl_or(pRExC_state, data->start_class, &accum);
3989 cl_and(data->start_class, and_withp);
3990 flags &= ~SCF_DO_STCLASS;
3993 else if (flags & SCF_DO_STCLASS_AND) {
3995 cl_and(data->start_class, &accum);
3996 flags &= ~SCF_DO_STCLASS;
3999 /* Switch to OR mode: cache the old value of
4000 * data->start_class */
4002 StructCopy(data->start_class, and_withp,
4003 struct regnode_charclass_class);
4004 flags &= ~SCF_DO_STCLASS_AND;
4005 StructCopy(&accum, data->start_class,
4006 struct regnode_charclass_class);
4007 flags |= SCF_DO_STCLASS_OR;
4008 data->start_class->flags |= ANYOF_EOS;
4015 else if (PL_regkind[OP(scan)] == TRIE) {
4016 reg_trie_data *trie = (reg_trie_data*)RExC_rxi->data->data[ ARG(scan) ];
4019 min += trie->minlen;
4020 delta += (trie->maxlen - trie->minlen);
4021 flags &= ~SCF_DO_STCLASS; /* xxx */
4022 if (flags & SCF_DO_SUBSTR) {
4023 SCAN_COMMIT(pRExC_state,data,minlenp); /* Cannot expect anything... */
4024 data->pos_min += trie->minlen;
4025 data->pos_delta += (trie->maxlen - trie->minlen);
4026 if (trie->maxlen != trie->minlen)
4027 data->longest = &(data->longest_float);
4029 if (trie->jump) /* no more substrings -- for now /grr*/
4030 flags &= ~SCF_DO_SUBSTR;
4032 #endif /* old or new */
4033 #endif /* TRIE_STUDY_OPT */
4035 /* Else: zero-length, ignore. */
4036 scan = regnext(scan);
4041 stopparen = frame->stop;
4042 frame = frame->prev;
4043 goto fake_study_recurse;
4048 DEBUG_STUDYDATA("pre-fin:",data,depth);
4051 *deltap = is_inf_internal ? I32_MAX : delta;
4052 if (flags & SCF_DO_SUBSTR && is_inf)
4053 data->pos_delta = I32_MAX - data->pos_min;
4054 if (is_par > (I32)U8_MAX)
4056 if (is_par && pars==1 && data) {
4057 data->flags |= SF_IN_PAR;
4058 data->flags &= ~SF_HAS_PAR;
4060 else if (pars && data) {
4061 data->flags |= SF_HAS_PAR;
4062 data->flags &= ~SF_IN_PAR;
4064 if (flags & SCF_DO_STCLASS_OR)
4065 cl_and(data->start_class, and_withp);
4066 if (flags & SCF_TRIE_RESTUDY)
4067 data->flags |= SCF_TRIE_RESTUDY;
4069 DEBUG_STUDYDATA("post-fin:",data,depth);
4071 return min < stopmin ? min : stopmin;
4075 S_add_data(RExC_state_t *pRExC_state, U32 n, const char *s)
4077 U32 count = RExC_rxi->data ? RExC_rxi->data->count : 0;
4079 PERL_ARGS_ASSERT_ADD_DATA;
4081 Renewc(RExC_rxi->data,
4082 sizeof(*RExC_rxi->data) + sizeof(void*) * (count + n - 1),
4083 char, struct reg_data);
4085 Renew(RExC_rxi->data->what, count + n, U8);
4087 Newx(RExC_rxi->data->what, n, U8);
4088 RExC_rxi->data->count = count + n;
4089 Copy(s, RExC_rxi->data->what + count, n, U8);
4093 /*XXX: todo make this not included in a non debugging perl */
4094 #ifndef PERL_IN_XSUB_RE
4096 Perl_reginitcolors(pTHX)
4099 const char * const s = PerlEnv_getenv("PERL_RE_COLORS");
4101 char *t = savepv(s);
4105 t = strchr(t, '\t');
4111 PL_colors[i] = t = (char *)"";
4116 PL_colors[i++] = (char *)"";
4123 #ifdef TRIE_STUDY_OPT
4124 #define CHECK_RESTUDY_GOTO \
4126 (data.flags & SCF_TRIE_RESTUDY) \
4130 #define CHECK_RESTUDY_GOTO
4134 - pregcomp - compile a regular expression into internal code
4136 * We can't allocate space until we know how big the compiled form will be,
4137 * but we can't compile it (and thus know how big it is) until we've got a
4138 * place to put the code. So we cheat: we compile it twice, once with code
4139 * generation turned off and size counting turned on, and once "for real".
4140 * This also means that we don't allocate space until we are sure that the
4141 * thing really will compile successfully, and we never have to move the
4142 * code and thus invalidate pointers into it. (Note that it has to be in
4143 * one piece because free() must be able to free it all.) [NB: not true in perl]
4145 * Beware that the optimization-preparation code in here knows about some
4146 * of the structure of the compiled regexp. [I'll say.]
4151 #ifndef PERL_IN_XSUB_RE
4152 #define RE_ENGINE_PTR &PL_core_reg_engine
4154 extern const struct regexp_engine my_reg_engine;
4155 #define RE_ENGINE_PTR &my_reg_engine
4158 #ifndef PERL_IN_XSUB_RE
4160 Perl_pregcomp(pTHX_ const SV * const pattern, const U32 flags)
4163 HV * const table = GvHV(PL_hintgv);
4165 PERL_ARGS_ASSERT_PREGCOMP;
4167 /* Dispatch a request to compile a regexp to correct
4170 SV **ptr= hv_fetchs(table, "regcomp", FALSE);
4171 GET_RE_DEBUG_FLAGS_DECL;
4172 if (ptr && SvIOK(*ptr) && SvIV(*ptr)) {
4173 const regexp_engine *eng=INT2PTR(regexp_engine*,SvIV(*ptr));
4175 PerlIO_printf(Perl_debug_log, "Using engine %"UVxf"\n",
4178 return CALLREGCOMP_ENG(eng, pattern, flags);
4181 return Perl_re_compile(aTHX_ pattern, flags);
4186 Perl_re_compile(pTHX_ const SV * const pattern, U32 pm_flags)
4191 register regexp_internal *ri;
4193 char* exp = SvPV((SV*)pattern, plen);
4194 char* xend = exp + plen;
4201 RExC_state_t RExC_state;
4202 RExC_state_t * const pRExC_state = &RExC_state;
4203 #ifdef TRIE_STUDY_OPT
4205 RExC_state_t copyRExC_state;
4207 GET_RE_DEBUG_FLAGS_DECL;
4209 PERL_ARGS_ASSERT_RE_COMPILE;
4211 DEBUG_r(if (!PL_colorset) reginitcolors());
4213 RExC_utf8 = RExC_orig_utf8 = SvUTF8(pattern);
4216 SV *dsv= sv_newmortal();
4217 RE_PV_QUOTED_DECL(s, RExC_utf8,
4218 dsv, exp, plen, 60);
4219 PerlIO_printf(Perl_debug_log, "%sCompiling REx%s %s\n",
4220 PL_colors[4],PL_colors[5],s);
4225 RExC_flags = pm_flags;
4229 RExC_seen_zerolen = *exp == '^' ? -1 : 0;
4230 RExC_seen_evals = 0;
4233 /* First pass: determine size, legality. */
4241 RExC_emit = &PL_regdummy;
4242 RExC_whilem_seen = 0;
4243 RExC_charnames = NULL;
4244 RExC_open_parens = NULL;
4245 RExC_close_parens = NULL;
4247 RExC_paren_names = NULL;
4249 RExC_paren_name_list = NULL;
4251 RExC_recurse = NULL;
4252 RExC_recurse_count = 0;
4254 #if 0 /* REGC() is (currently) a NOP at the first pass.
4255 * Clever compilers notice this and complain. --jhi */
4256 REGC((U8)REG_MAGIC, (char*)RExC_emit);
4258 DEBUG_PARSE_r(PerlIO_printf(Perl_debug_log, "Starting first pass (sizing)\n"));
4259 if (reg(pRExC_state, 0, &flags,1) == NULL) {
4260 RExC_precomp = NULL;
4263 if (RExC_utf8 && !RExC_orig_utf8) {
4264 /* It's possible to write a regexp in ascii that represents Unicode
4265 codepoints outside of the byte range, such as via \x{100}. If we
4266 detect such a sequence we have to convert the entire pattern to utf8
4267 and then recompile, as our sizing calculation will have been based
4268 on 1 byte == 1 character, but we will need to use utf8 to encode
4269 at least some part of the pattern, and therefore must convert the whole
4271 XXX: somehow figure out how to make this less expensive...
4274 DEBUG_PARSE_r(PerlIO_printf(Perl_debug_log,
4275 "UTF8 mismatch! Converting to utf8 for resizing and compile\n"));
4276 exp = (char*)Perl_bytes_to_utf8(aTHX_ (U8*)exp, &len);
4278 RExC_orig_utf8 = RExC_utf8;
4280 goto redo_first_pass;
4283 PerlIO_printf(Perl_debug_log,
4284 "Required size %"IVdf" nodes\n"
4285 "Starting second pass (creation)\n",
4288 RExC_lastparse=NULL;
4290 /* Small enough for pointer-storage convention?
4291 If extralen==0, this means that we will not need long jumps. */
4292 if (RExC_size >= 0x10000L && RExC_extralen)
4293 RExC_size += RExC_extralen;
4296 if (RExC_whilem_seen > 15)
4297 RExC_whilem_seen = 15;
4299 /* Allocate space and zero-initialize. Note, the two step process
4300 of zeroing when in debug mode, thus anything assigned has to
4301 happen after that */
4302 rx = (REGEXP*) newSV_type(SVt_REGEXP);
4303 r = (struct regexp*)SvANY(rx);
4304 Newxc(ri, sizeof(regexp_internal) + (unsigned)RExC_size * sizeof(regnode),
4305 char, regexp_internal);
4306 if ( r == NULL || ri == NULL )
4307 FAIL("Regexp out of space");
4309 /* avoid reading uninitialized memory in DEBUGGING code in study_chunk() */
4310 Zero(ri, sizeof(regexp_internal) + (unsigned)RExC_size * sizeof(regnode), char);
4312 /* bulk initialize base fields with 0. */
4313 Zero(ri, sizeof(regexp_internal), char);
4316 /* non-zero initialization begins here */
4318 r->engine= RE_ENGINE_PTR;
4319 r->extflags = pm_flags;
4321 bool has_p = ((r->extflags & RXf_PMf_KEEPCOPY) == RXf_PMf_KEEPCOPY);
4322 bool has_minus = ((r->extflags & RXf_PMf_STD_PMMOD) != RXf_PMf_STD_PMMOD);
4323 bool has_runon = ((RExC_seen & REG_SEEN_RUN_ON_COMMENT)==REG_SEEN_RUN_ON_COMMENT);
4324 U16 reganch = (U16)((r->extflags & RXf_PMf_STD_PMMOD)
4325 >> RXf_PMf_STD_PMMOD_SHIFT);
4326 const char *fptr = STD_PAT_MODS; /*"msix"*/
4328 const STRLEN wraplen = plen + has_minus + has_p + has_runon
4329 + (sizeof(STD_PAT_MODS) - 1)
4330 + (sizeof("(?:)") - 1);
4332 p = sv_grow((SV *)rx, wraplen + 1);
4333 SvCUR_set(rx, wraplen);
4335 SvFLAGS(rx) |= SvUTF8(pattern);
4338 *p++ = KEEPCOPY_PAT_MOD; /*'p'*/
4340 char *r = p + (sizeof(STD_PAT_MODS) - 1) + has_minus - 1;
4341 char *colon = r + 1;
4344 while((ch = *fptr++)) {
4358 Copy(RExC_precomp, p, plen, char);
4359 assert ((RX_WRAPPED(rx) - p) < 16);
4360 r->pre_prefix = p - RX_WRAPPED(rx);
4369 r->nparens = RExC_npar - 1; /* set early to validate backrefs */
4371 if (RExC_seen & REG_SEEN_RECURSE) {
4372 Newxz(RExC_open_parens, RExC_npar,regnode *);
4373 SAVEFREEPV(RExC_open_parens);
4374 Newxz(RExC_close_parens,RExC_npar,regnode *);
4375 SAVEFREEPV(RExC_close_parens);
4378 /* Useful during FAIL. */
4379 #ifdef RE_TRACK_PATTERN_OFFSETS
4380 Newxz(ri->u.offsets, 2*RExC_size+1, U32); /* MJD 20001228 */
4381 DEBUG_OFFSETS_r(PerlIO_printf(Perl_debug_log,
4382 "%s %"UVuf" bytes for offset annotations.\n",
4383 ri->u.offsets ? "Got" : "Couldn't get",
4384 (UV)((2*RExC_size+1) * sizeof(U32))));
4386 SetProgLen(ri,RExC_size);
4391 /* Second pass: emit code. */
4392 RExC_flags = pm_flags; /* don't let top level (?i) bleed */
4397 RExC_emit_start = ri->program;
4398 RExC_emit = ri->program;
4399 RExC_emit_bound = ri->program + RExC_size + 1;
4401 /* Store the count of eval-groups for security checks: */
4402 RExC_rx->seen_evals = RExC_seen_evals;
4403 REGC((U8)REG_MAGIC, (char*) RExC_emit++);
4404 if (reg(pRExC_state, 0, &flags,1) == NULL) {
4408 /* XXXX To minimize changes to RE engine we always allocate
4409 3-units-long substrs field. */
4410 Newx(r->substrs, 1, struct reg_substr_data);
4411 if (RExC_recurse_count) {
4412 Newxz(RExC_recurse,RExC_recurse_count,regnode *);
4413 SAVEFREEPV(RExC_recurse);
4417 r->minlen = minlen = sawplus = sawopen = 0;
4418 Zero(r->substrs, 1, struct reg_substr_data);
4420 #ifdef TRIE_STUDY_OPT
4422 StructCopy(&zero_scan_data, &data, scan_data_t);
4423 copyRExC_state = RExC_state;
4426 DEBUG_OPTIMISE_r(PerlIO_printf(Perl_debug_log,"Restudying\n"));
4428 RExC_state = copyRExC_state;
4429 if (seen & REG_TOP_LEVEL_BRANCHES)
4430 RExC_seen |= REG_TOP_LEVEL_BRANCHES;
4432 RExC_seen &= ~REG_TOP_LEVEL_BRANCHES;
4433 if (data.last_found) {
4434 SvREFCNT_dec(data.longest_fixed);
4435 SvREFCNT_dec(data.longest_float);
4436 SvREFCNT_dec(data.last_found);
4438 StructCopy(&zero_scan_data, &data, scan_data_t);
4441 StructCopy(&zero_scan_data, &data, scan_data_t);
4444 /* Dig out information for optimizations. */
4445 r->extflags = RExC_flags; /* was pm_op */
4446 /*dmq: removed as part of de-PMOP: pm->op_pmflags = RExC_flags; */
4449 SvUTF8_on(rx); /* Unicode in it? */
4450 ri->regstclass = NULL;
4451 if (RExC_naughty >= 10) /* Probably an expensive pattern. */
4452 r->intflags |= PREGf_NAUGHTY;
4453 scan = ri->program + 1; /* First BRANCH. */
4455 /* testing for BRANCH here tells us whether there is "must appear"
4456 data in the pattern. If there is then we can use it for optimisations */
4457 if (!(RExC_seen & REG_TOP_LEVEL_BRANCHES)) { /* Only one top-level choice. */
4459 STRLEN longest_float_length, longest_fixed_length;
4460 struct regnode_charclass_class ch_class; /* pointed to by data */
4462 I32 last_close = 0; /* pointed to by data */
4463 regnode *first= scan;
4464 regnode *first_next= regnext(first);
4467 * Skip introductions and multiplicators >= 1
4468 * so that we can extract the 'meat' of the pattern that must
4469 * match in the large if() sequence following.
4470 * NOTE that EXACT is NOT covered here, as it is normally
4471 * picked up by the optimiser separately.
4473 * This is unfortunate as the optimiser isnt handling lookahead
4474 * properly currently.
4477 while ((OP(first) == OPEN && (sawopen = 1)) ||
4478 /* An OR of *one* alternative - should not happen now. */
4479 (OP(first) == BRANCH && OP(first_next) != BRANCH) ||
4480 /* for now we can't handle lookbehind IFMATCH*/
4481 (OP(first) == IFMATCH && !first->flags) ||
4482 (OP(first) == PLUS) ||
4483 (OP(first) == MINMOD) ||
4484 /* An {n,m} with n>0 */
4485 (PL_regkind[OP(first)] == CURLY && ARG1(first) > 0) ||
4486 (OP(first) == NOTHING && PL_regkind[OP(first_next)] != END ))
4489 * the only op that could be a regnode is PLUS, all the rest
4490 * will be regnode_1 or regnode_2.
4493 if (OP(first) == PLUS)
4496 first += regarglen[OP(first)];
4498 first = NEXTOPER(first);
4499 first_next= regnext(first);
4502 /* Starting-point info. */
4504 DEBUG_PEEP("first:",first,0);
4505 /* Ignore EXACT as we deal with it later. */
4506 if (PL_regkind[OP(first)] == EXACT) {
4507 if (OP(first) == EXACT)
4508 NOOP; /* Empty, get anchored substr later. */
4509 else if ((OP(first) == EXACTF || OP(first) == EXACTFL))
4510 ri->regstclass = first;
4513 else if (PL_regkind[OP(first)] == TRIE &&
4514 ((reg_trie_data *)ri->data->data[ ARG(first) ])->minlen>0)
4517 /* this can happen only on restudy */
4518 if ( OP(first) == TRIE ) {
4519 struct regnode_1 *trieop = (struct regnode_1 *)
4520 PerlMemShared_calloc(1, sizeof(struct regnode_1));
4521 StructCopy(first,trieop,struct regnode_1);
4522 trie_op=(regnode *)trieop;
4524 struct regnode_charclass *trieop = (struct regnode_charclass *)
4525 PerlMemShared_calloc(1, sizeof(struct regnode_charclass));
4526 StructCopy(first,trieop,struct regnode_charclass);
4527 trie_op=(regnode *)trieop;
4530 make_trie_failtable(pRExC_state, (regnode *)first, trie_op, 0);
4531 ri->regstclass = trie_op;
4534 else if (strchr((const char*)PL_simple,OP(first)))
4535 ri->regstclass = first;
4536 else if (PL_regkind[OP(first)] == BOUND ||
4537 PL_regkind[OP(first)] == NBOUND)
4538 ri->regstclass = first;
4539 else if (PL_regkind[OP(first)] == BOL) {
4540 r->extflags |= (OP(first) == MBOL
4542 : (OP(first) == SBOL
4545 first = NEXTOPER(first);
4548 else if (OP(first) == GPOS) {
4549 r->extflags |= RXf_ANCH_GPOS;
4550 first = NEXTOPER(first);
4553 else if ((!sawopen || !RExC_sawback) &&
4554 (OP(first) == STAR &&
4555 PL_regkind[OP(NEXTOPER(first))] == REG_ANY) &&
4556 !(r->extflags & RXf_ANCH) && !(RExC_seen & REG_SEEN_EVAL))
4558 /* turn .* into ^.* with an implied $*=1 */
4560 (OP(NEXTOPER(first)) == REG_ANY)
4563 r->extflags |= type;
4564 r->intflags |= PREGf_IMPLICIT;
4565 first = NEXTOPER(first);
4568 if (sawplus && (!sawopen || !RExC_sawback)
4569 && !(RExC_seen & REG_SEEN_EVAL)) /* May examine pos and $& */
4570 /* x+ must match at the 1st pos of run of x's */
4571 r->intflags |= PREGf_SKIP;
4573 /* Scan is after the zeroth branch, first is atomic matcher. */
4574 #ifdef TRIE_STUDY_OPT
4577 PerlIO_printf(Perl_debug_log, "first at %"IVdf"\n",
4578 (IV)(first - scan + 1))
4582 PerlIO_printf(Perl_debug_log, "first at %"IVdf"\n",
4583 (IV)(first - scan + 1))
4589 * If there's something expensive in the r.e., find the
4590 * longest literal string that must appear and make it the
4591 * regmust. Resolve ties in favor of later strings, since
4592 * the regstart check works with the beginning of the r.e.
4593 * and avoiding duplication strengthens checking. Not a
4594 * strong reason, but sufficient in the absence of others.
4595 * [Now we resolve ties in favor of the earlier string if
4596 * it happens that c_offset_min has been invalidated, since the
4597 * earlier string may buy us something the later one won't.]
4600 data.longest_fixed = newSVpvs("");
4601 data.longest_float = newSVpvs("");
4602 data.last_found = newSVpvs("");
4603 data.longest = &(data.longest_fixed);
4605 if (!ri->regstclass) {
4606 cl_init(pRExC_state, &ch_class);
4607 data.start_class = &ch_class;
4608 stclass_flag = SCF_DO_STCLASS_AND;
4609 } else /* XXXX Check for BOUND? */
4611 data.last_closep = &last_close;
4613 minlen = study_chunk(pRExC_state, &first, &minlen, &fake, scan + RExC_size, /* Up to end */
4614 &data, -1, NULL, NULL,
4615 SCF_DO_SUBSTR | SCF_WHILEM_VISITED_POS | stclass_flag,0);
4621 if ( RExC_npar == 1 && data.longest == &(data.longest_fixed)
4622 && data.last_start_min == 0 && data.last_end > 0
4623 && !RExC_seen_zerolen
4624 && !(RExC_seen & REG_SEEN_VERBARG)
4625 && (!(RExC_seen & REG_SEEN_GPOS) || (r->extflags & RXf_ANCH_GPOS)))
4626 r->extflags |= RXf_CHECK_ALL;
4627 scan_commit(pRExC_state, &data,&minlen,0);
4628 SvREFCNT_dec(data.last_found);
4630 /* Note that code very similar to this but for anchored string
4631 follows immediately below, changes may need to be made to both.
4634 longest_float_length = CHR_SVLEN(data.longest_float);
4635 if (longest_float_length
4636 || (data.flags & SF_FL_BEFORE_EOL
4637 && (!(data.flags & SF_FL_BEFORE_MEOL)
4638 || (RExC_flags & RXf_PMf_MULTILINE))))
4642 if (SvCUR(data.longest_fixed) /* ok to leave SvCUR */
4643 && data.offset_fixed == data.offset_float_min
4644 && SvCUR(data.longest_fixed) == SvCUR(data.longest_float))
4645 goto remove_float; /* As in (a)+. */
4647 /* copy the information about the longest float from the reg_scan_data
4648 over to the program. */
4649 if (SvUTF8(data.longest_float)) {
4650 r->float_utf8 = data.longest_float;
4651 r->float_substr = NULL;
4653 r->float_substr = data.longest_float;
4654 r->float_utf8 = NULL;
4656 /* float_end_shift is how many chars that must be matched that
4657 follow this item. We calculate it ahead of time as once the
4658 lookbehind offset is added in we lose the ability to correctly
4660 ml = data.minlen_float ? *(data.minlen_float)
4661 : (I32)longest_float_length;
4662 r->float_end_shift = ml - data.offset_float_min
4663 - longest_float_length + (SvTAIL(data.longest_float) != 0)
4664 + data.lookbehind_float;
4665 r->float_min_offset = data.offset_float_min - data.lookbehind_float;
4666 r->float_max_offset = data.offset_float_max;
4667 if (data.offset_float_max < I32_MAX) /* Don't offset infinity */
4668 r->float_max_offset -= data.lookbehind_float;
4670 t = (data.flags & SF_FL_BEFORE_EOL /* Can't have SEOL and MULTI */
4671 && (!(data.flags & SF_FL_BEFORE_MEOL)
4672 || (RExC_flags & RXf_PMf_MULTILINE)));
4673 fbm_compile(data.longest_float, t ? FBMcf_TAIL : 0);
4677 r->float_substr = r->float_utf8 = NULL;
4678 SvREFCNT_dec(data.longest_float);
4679 longest_float_length = 0;
4682 /* Note that code very similar to this but for floating string
4683 is immediately above, changes may need to be made to both.
4686 longest_fixed_length = CHR_SVLEN(data.longest_fixed);
4687 if (longest_fixed_length
4688 || (data.flags & SF_FIX_BEFORE_EOL /* Cannot have SEOL and MULTI */
4689 && (!(data.flags & SF_FIX_BEFORE_MEOL)
4690 || (RExC_flags & RXf_PMf_MULTILINE))))
4694 /* copy the information about the longest fixed
4695 from the reg_scan_data over to the program. */
4696 if (SvUTF8(data.longest_fixed)) {
4697 r->anchored_utf8 = data.longest_fixed;
4698 r->anchored_substr = NULL;
4700 r->anchored_substr = data.longest_fixed;
4701 r->anchored_utf8 = NULL;
4703 /* fixed_end_shift is how many chars that must be matched that
4704 follow this item. We calculate it ahead of time as once the
4705 lookbehind offset is added in we lose the ability to correctly
4707 ml = data.minlen_fixed ? *(data.minlen_fixed)
4708 : (I32)longest_fixed_length;
4709 r->anchored_end_shift = ml - data.offset_fixed
4710 - longest_fixed_length + (SvTAIL(data.longest_fixed) != 0)
4711 + data.lookbehind_fixed;
4712 r->anchored_offset = data.offset_fixed - data.lookbehind_fixed;
4714 t = (data.flags & SF_FIX_BEFORE_EOL /* Can't have SEOL and MULTI */
4715 && (!(data.flags & SF_FIX_BEFORE_MEOL)
4716 || (RExC_flags & RXf_PMf_MULTILINE)));
4717 fbm_compile(data.longest_fixed, t ? FBMcf_TAIL : 0);
4720 r->anchored_substr = r->anchored_utf8 = NULL;
4721 SvREFCNT_dec(data.longest_fixed);
4722 longest_fixed_length = 0;
4725 && (OP(ri->regstclass) == REG_ANY || OP(ri->regstclass) == SANY))
4726 ri->regstclass = NULL;
4727 if ((!(r->anchored_substr || r->anchored_utf8) || r->anchored_offset)
4729 && !(data.start_class->flags & ANYOF_EOS)
4730 && !cl_is_anything(data.start_class))
4732 const U32 n = add_data(pRExC_state, 1, "f");
4734 Newx(RExC_rxi->data->data[n], 1,
4735 struct regnode_charclass_class);
4736 StructCopy(data.start_class,
4737 (struct regnode_charclass_class*)RExC_rxi->data->data[n],
4738 struct regnode_charclass_class);
4739 ri->regstclass = (regnode*)RExC_rxi->data->data[n];
4740 r->intflags &= ~PREGf_SKIP; /* Used in find_byclass(). */
4741 DEBUG_COMPILE_r({ SV *sv = sv_newmortal();
4742 regprop(r, sv, (regnode*)data.start_class);
4743 PerlIO_printf(Perl_debug_log,
4744 "synthetic stclass \"%s\".\n",
4745 SvPVX_const(sv));});
4748 /* A temporary algorithm prefers floated substr to fixed one to dig more info. */
4749 if (longest_fixed_length > longest_float_length) {
4750 r->check_end_shift = r->anchored_end_shift;
4751 r->check_substr = r->anchored_substr;
4752 r->check_utf8 = r->anchored_utf8;
4753 r->check_offset_min = r->check_offset_max = r->anchored_offset;
4754 if (r->extflags & RXf_ANCH_SINGLE)
4755 r->extflags |= RXf_NOSCAN;
4758 r->check_end_shift = r->float_end_shift;
4759 r->check_substr = r->float_substr;
4760 r->check_utf8 = r->float_utf8;
4761 r->check_offset_min = r->float_min_offset;
4762 r->check_offset_max = r->float_max_offset;
4764 /* XXXX Currently intuiting is not compatible with ANCH_GPOS.
4765 This should be changed ASAP! */
4766 if ((r->check_substr || r->check_utf8) && !(r->extflags & RXf_ANCH_GPOS)) {
4767 r->extflags |= RXf_USE_INTUIT;
4768 if (SvTAIL(r->check_substr ? r->check_substr : r->check_utf8))
4769 r->extflags |= RXf_INTUIT_TAIL;
4771 /* XXX Unneeded? dmq (shouldn't as this is handled elsewhere)
4772 if ( (STRLEN)minlen < longest_float_length )
4773 minlen= longest_float_length;
4774 if ( (STRLEN)minlen < longest_fixed_length )
4775 minlen= longest_fixed_length;
4779 /* Several toplevels. Best we can is to set minlen. */
4781 struct regnode_charclass_class ch_class;
4784 DEBUG_PARSE_r(PerlIO_printf(Perl_debug_log, "\nMulti Top Level\n"));
4786 scan = ri->program + 1;
4787 cl_init(pRExC_state, &ch_class);
4788 data.start_class = &ch_class;
4789 data.last_closep = &last_close;
4792 minlen = study_chunk(pRExC_state, &scan, &minlen, &fake, scan + RExC_size,
4793 &data, -1, NULL, NULL, SCF_DO_STCLASS_AND|SCF_WHILEM_VISITED_POS,0);
4797 r->check_substr = r->check_utf8 = r->anchored_substr = r->anchored_utf8
4798 = r->float_substr = r->float_utf8 = NULL;
4799 if (!(data.start_class->flags & ANYOF_EOS)
4800 && !cl_is_anything(data.start_class))
4802 const U32 n = add_data(pRExC_state, 1, "f");
4804 Newx(RExC_rxi->data->data[n], 1,
4805 struct regnode_charclass_class);
4806 StructCopy(data.start_class,
4807 (struct regnode_charclass_class*)RExC_rxi->data->data[n],
4808 struct regnode_charclass_class);
4809 ri->regstclass = (regnode*)RExC_rxi->data->data[n];
4810 r->intflags &= ~PREGf_SKIP; /* Used in find_byclass(). */
4811 DEBUG_COMPILE_r({ SV* sv = sv_newmortal();
4812 regprop(r, sv, (regnode*)data.start_class);
4813 PerlIO_printf(Perl_debug_log,
4814 "synthetic stclass \"%s\".\n",
4815 SvPVX_const(sv));});
4819 /* Guard against an embedded (?=) or (?<=) with a longer minlen than
4820 the "real" pattern. */
4822 PerlIO_printf(Perl_debug_log,"minlen: %"IVdf" r->minlen:%"IVdf"\n",
4823 (IV)minlen, (IV)r->minlen);
4825 r->minlenret = minlen;
4826 if (r->minlen < minlen)
4829 if (RExC_seen & REG_SEEN_GPOS)
4830 r->extflags |= RXf_GPOS_SEEN;
4831 if (RExC_seen & REG_SEEN_LOOKBEHIND)
4832 r->extflags |= RXf_LOOKBEHIND_SEEN;
4833 if (RExC_seen & REG_SEEN_EVAL)
4834 r->extflags |= RXf_EVAL_SEEN;
4835 if (RExC_seen & REG_SEEN_CANY)
4836 r->extflags |= RXf_CANY_SEEN;
4837 if (RExC_seen & REG_SEEN_VERBARG)
4838 r->intflags |= PREGf_VERBARG_SEEN;
4839 if (RExC_seen & REG_SEEN_CUTGROUP)
4840 r->intflags |= PREGf_CUTGROUP_SEEN;
4841 if (RExC_paren_names)
4842 RXp_PAREN_NAMES(r) = (HV*)SvREFCNT_inc(RExC_paren_names);
4844 RXp_PAREN_NAMES(r) = NULL;
4846 #ifdef STUPID_PATTERN_CHECKS
4847 if (RX_PRELEN(rx) == 0)
4848 r->extflags |= RXf_NULL;
4849 if (r->extflags & RXf_SPLIT && RX_PRELEN(rx) == 1 && RX_PRECOMP(rx)[0] == ' ')
4850 /* XXX: this should happen BEFORE we compile */
4851 r->extflags |= (RXf_SKIPWHITE|RXf_WHITE);
4852 else if (RX_PRELEN(rx) == 3 && memEQ("\\s+", RX_PRECOMP(rx), 3))
4853 r->extflags |= RXf_WHITE;
4854 else if (RX_PRELEN(rx) == 1 && RXp_PRECOMP(rx)[0] == '^')
4855 r->extflags |= RXf_START_ONLY;
4857 if (r->extflags & RXf_SPLIT && RX_PRELEN(rx) == 1 && RX_PRECOMP(rx)[0] == ' ')
4858 /* XXX: this should happen BEFORE we compile */
4859 r->extflags |= (RXf_SKIPWHITE|RXf_WHITE);
4861 regnode *first = ri->program + 1;
4863 U8 nop = OP(NEXTOPER(first));
4865 if (PL_regkind[fop] == NOTHING && nop == END)
4866 r->extflags |= RXf_NULL;
4867 else if (PL_regkind[fop] == BOL && nop == END)
4868 r->extflags |= RXf_START_ONLY;
4869 else if (fop == PLUS && nop ==SPACE && OP(regnext(first))==END)
4870 r->extflags |= RXf_WHITE;
4874 if (RExC_paren_names) {
4875 ri->name_list_idx = add_data( pRExC_state, 1, "p" );
4876 ri->data->data[ri->name_list_idx] = (void*)SvREFCNT_inc(RExC_paren_name_list);
4879 ri->name_list_idx = 0;
4881 if (RExC_recurse_count) {
4882 for ( ; RExC_recurse_count ; RExC_recurse_count-- ) {
4883 const regnode *scan = RExC_recurse[RExC_recurse_count-1];
4884 ARG2L_SET( scan, RExC_open_parens[ARG(scan)-1] - scan );
4887 Newxz(r->offs, RExC_npar, regexp_paren_pair);
4888 /* assume we don't need to swap parens around before we match */
4891 PerlIO_printf(Perl_debug_log,"Final program:\n");
4894 #ifdef RE_TRACK_PATTERN_OFFSETS
4895 DEBUG_OFFSETS_r(if (ri->u.offsets) {
4896 const U32 len = ri->u.offsets[0];
4898 GET_RE_DEBUG_FLAGS_DECL;
4899 PerlIO_printf(Perl_debug_log, "Offsets: [%"UVuf"]\n\t", (UV)ri->u.offsets[0]);
4900 for (i = 1; i <= len; i++) {
4901 if (ri->u.offsets[i*2-1] || ri->u.offsets[i*2])
4902 PerlIO_printf(Perl_debug_log, "%"UVuf":%"UVuf"[%"UVuf"] ",
4903 (UV)i, (UV)ri->u.offsets[i*2-1], (UV)ri->u.offsets[i*2]);
4905 PerlIO_printf(Perl_debug_log, "\n");
4911 #undef RE_ENGINE_PTR
4915 Perl_reg_named_buff(pTHX_ REGEXP * const rx, SV * const key, SV * const value,
4918 PERL_ARGS_ASSERT_REG_NAMED_BUFF;
4920 PERL_UNUSED_ARG(value);
4922 if (flags & RXapif_FETCH) {
4923 return reg_named_buff_fetch(rx, key, flags);
4924 } else if (flags & (RXapif_STORE | RXapif_DELETE | RXapif_CLEAR)) {
4925 Perl_croak(aTHX_ PL_no_modify);
4927 } else if (flags & RXapif_EXISTS) {
4928 return reg_named_buff_exists(rx, key, flags)
4931 } else if (flags & RXapif_REGNAMES) {
4932 return reg_named_buff_all(rx, flags);
4933 } else if (flags & (RXapif_SCALAR | RXapif_REGNAMES_COUNT)) {
4934 return reg_named_buff_scalar(rx, flags);
4936 Perl_croak(aTHX_ "panic: Unknown flags %d in named_buff", (int)flags);
4942 Perl_reg_named_buff_iter(pTHX_ REGEXP * const rx, const SV * const lastkey,
4945 PERL_ARGS_ASSERT_REG_NAMED_BUFF_ITER;
4946 PERL_UNUSED_ARG(lastkey);
4948 if (flags & RXapif_FIRSTKEY)
4949 return reg_named_buff_firstkey(rx, flags);
4950 else if (flags & RXapif_NEXTKEY)
4951 return reg_named_buff_nextkey(rx, flags);
4953 Perl_croak(aTHX_ "panic: Unknown flags %d in named_buff_iter", (int)flags);
4959 Perl_reg_named_buff_fetch(pTHX_ REGEXP * const r, SV * const namesv,
4962 AV *retarray = NULL;
4964 struct regexp *const rx = (struct regexp *)SvANY(r);
4966 PERL_ARGS_ASSERT_REG_NAMED_BUFF_FETCH;
4968 if (flags & RXapif_ALL)
4971 if (rx && RXp_PAREN_NAMES(rx)) {
4972 HE *he_str = hv_fetch_ent( RXp_PAREN_NAMES(rx), namesv, 0, 0 );
4975 SV* sv_dat=HeVAL(he_str);
4976 I32 *nums=(I32*)SvPVX(sv_dat);
4977 for ( i=0; i<SvIVX(sv_dat); i++ ) {
4978 if ((I32)(rx->nparens) >= nums[i]
4979 && rx->offs[nums[i]].start != -1
4980 && rx->offs[nums[i]].end != -1)
4983 CALLREG_NUMBUF_FETCH(r,nums[i],ret);
4987 ret = newSVsv(&PL_sv_undef);
4990 av_push(retarray, ret);
4993 return newRV_noinc((SV*)retarray);
5000 Perl_reg_named_buff_exists(pTHX_ REGEXP * const r, SV * const key,
5003 struct regexp *const rx = (struct regexp *)SvANY(r);
5005 PERL_ARGS_ASSERT_REG_NAMED_BUFF_EXISTS;
5007 if (rx && RXp_PAREN_NAMES(rx)) {
5008 if (flags & RXapif_ALL) {
5009 return hv_exists_ent(RXp_PAREN_NAMES(rx), key, 0);
5011 SV *sv = CALLREG_NAMED_BUFF_FETCH(r, key, flags);
5025 Perl_reg_named_buff_firstkey(pTHX_ REGEXP * const r, const U32 flags)
5027 struct regexp *const rx = (struct regexp *)SvANY(r);
5029 PERL_ARGS_ASSERT_REG_NAMED_BUFF_FIRSTKEY;
5031 if ( rx && RXp_PAREN_NAMES(rx) ) {
5032 (void)hv_iterinit(RXp_PAREN_NAMES(rx));
5034 return CALLREG_NAMED_BUFF_NEXTKEY(r, NULL, flags & ~RXapif_FIRSTKEY);
5041 Perl_reg_named_buff_nextkey(pTHX_ REGEXP * const r, const U32 flags)
5043 struct regexp *const rx = (struct regexp *)SvANY(r);
5044 GET_RE_DEBUG_FLAGS_DECL;
5046 PERL_ARGS_ASSERT_REG_NAMED_BUFF_NEXTKEY;
5048 if (rx && RXp_PAREN_NAMES(rx)) {
5049 HV *hv = RXp_PAREN_NAMES(rx);
5051 while ( (temphe = hv_iternext_flags(hv,0)) ) {
5054 SV* sv_dat = HeVAL(temphe);
5055 I32 *nums = (I32*)SvPVX(sv_dat);
5056 for ( i = 0; i < SvIVX(sv_dat); i++ ) {
5057 if ((I32)(rx->lastparen) >= nums[i] &&
5058 rx->offs[nums[i]].start != -1 &&
5059 rx->offs[nums[i]].end != -1)
5065 if (parno || flags & RXapif_ALL) {
5066 return newSVhek(HeKEY_hek(temphe));
5074 Perl_reg_named_buff_scalar(pTHX_ REGEXP * const r, const U32 flags)
5079 struct regexp *const rx = (struct regexp *)SvANY(r);
5081 PERL_ARGS_ASSERT_REG_NAMED_BUFF_SCALAR;
5083 if (rx && RXp_PAREN_NAMES(rx)) {
5084 if (flags & (RXapif_ALL | RXapif_REGNAMES_COUNT)) {
5085 return newSViv(HvTOTALKEYS(RXp_PAREN_NAMES(rx)));
5086 } else if (flags & RXapif_ONE) {
5087 ret = CALLREG_NAMED_BUFF_ALL(r, (flags | RXapif_REGNAMES));
5088 av = (AV*)SvRV(ret);
5089 length = av_len(av);
5091 return newSViv(length + 1);
5093 Perl_croak(aTHX_ "panic: Unknown flags %d in named_buff_scalar", (int)flags);
5097 return &PL_sv_undef;
5101 Perl_reg_named_buff_all(pTHX_ REGEXP * const r, const U32 flags)
5103 struct regexp *const rx = (struct regexp *)SvANY(r);
5106 PERL_ARGS_ASSERT_REG_NAMED_BUFF_ALL;
5108 if (rx && RXp_PAREN_NAMES(rx)) {
5109 HV *hv= RXp_PAREN_NAMES(rx);
5111 (void)hv_iterinit(hv);
5112 while ( (temphe = hv_iternext_flags(hv,0)) ) {
5115 SV* sv_dat = HeVAL(temphe);
5116 I32 *nums = (I32*)SvPVX(sv_dat);
5117 for ( i = 0; i < SvIVX(sv_dat); i++ ) {
5118 if ((I32)(rx->lastparen) >= nums[i] &&
5119 rx->offs[nums[i]].start != -1 &&
5120 rx->offs[nums[i]].end != -1)
5126 if (parno || flags & RXapif_ALL) {
5127 av_push(av, newSVhek(HeKEY_hek(temphe)));
5132 return newRV_noinc((SV*)av);
5136 Perl_reg_numbered_buff_fetch(pTHX_ REGEXP * const r, const I32 paren,
5139 struct regexp *const rx = (struct regexp *)SvANY(r);
5144 PERL_ARGS_ASSERT_REG_NUMBERED_BUFF_FETCH;
5147 sv_setsv(sv,&PL_sv_undef);
5151 if (paren == RX_BUFF_IDX_PREMATCH && rx->offs[0].start != -1) {
5153 i = rx->offs[0].start;
5157 if (paren == RX_BUFF_IDX_POSTMATCH && rx->offs[0].end != -1) {
5159 s = rx->subbeg + rx->offs[0].end;
5160 i = rx->sublen - rx->offs[0].end;
5163 if ( 0 <= paren && paren <= (I32)rx->nparens &&
5164 (s1 = rx->offs[paren].start) != -1 &&
5165 (t1 = rx->offs[paren].end) != -1)
5169 s = rx->subbeg + s1;
5171 sv_setsv(sv,&PL_sv_undef);
5174 assert(rx->sublen >= (s - rx->subbeg) + i );
5176 const int oldtainted = PL_tainted;
5178 sv_setpvn(sv, s, i);
5179 PL_tainted = oldtainted;
5180 if ( (rx->extflags & RXf_CANY_SEEN)
5181 ? (RXp_MATCH_UTF8(rx)
5182 && (!i || is_utf8_string((U8*)s, i)))
5183 : (RXp_MATCH_UTF8(rx)) )
5190 if (RXp_MATCH_TAINTED(rx)) {
5191 if (SvTYPE(sv) >= SVt_PVMG) {
5192 MAGIC* const mg = SvMAGIC(sv);
5195 SvMAGIC_set(sv, mg->mg_moremagic);
5197 if ((mgt = SvMAGIC(sv))) {
5198 mg->mg_moremagic = mgt;
5199 SvMAGIC_set(sv, mg);
5209 sv_setsv(sv,&PL_sv_undef);
5215 Perl_reg_numbered_buff_store(pTHX_ REGEXP * const rx, const I32 paren,
5216 SV const * const value)
5218 PERL_ARGS_ASSERT_REG_NUMBERED_BUFF_STORE;
5220 PERL_UNUSED_ARG(rx);
5221 PERL_UNUSED_ARG(paren);
5222 PERL_UNUSED_ARG(value);
5225 Perl_croak(aTHX_ PL_no_modify);
5229 Perl_reg_numbered_buff_length(pTHX_ REGEXP * const r, const SV * const sv,
5232 struct regexp *const rx = (struct regexp *)SvANY(r);
5236 PERL_ARGS_ASSERT_REG_NUMBERED_BUFF_LENGTH;
5238 /* Some of this code was originally in C<Perl_magic_len> in F<mg.c> */
5240 /* $` / ${^PREMATCH} */
5241 case RX_BUFF_IDX_PREMATCH:
5242 if (rx->offs[0].start != -1) {
5243 i = rx->offs[0].start;
5251 /* $' / ${^POSTMATCH} */
5252 case RX_BUFF_IDX_POSTMATCH:
5253 if (rx->offs[0].end != -1) {
5254 i = rx->sublen - rx->offs[0].end;
5256 s1 = rx->offs[0].end;
5262 /* $& / ${^MATCH}, $1, $2, ... */
5264 if (paren <= (I32)rx->nparens &&
5265 (s1 = rx->offs[paren].start) != -1 &&
5266 (t1 = rx->offs[paren].end) != -1)
5271 if (ckWARN(WARN_UNINITIALIZED))
5272 report_uninit((SV*)sv);
5277 if (i > 0 && RXp_MATCH_UTF8(rx)) {
5278 const char * const s = rx->subbeg + s1;
5283 if (is_utf8_string_loclen((U8*)s, i, &ep, &el))
5290 Perl_reg_qr_package(pTHX_ REGEXP * const rx)
5292 PERL_ARGS_ASSERT_REG_QR_PACKAGE;
5293 PERL_UNUSED_ARG(rx);
5297 return newSVpvs("Regexp");
5300 /* Scans the name of a named buffer from the pattern.
5301 * If flags is REG_RSN_RETURN_NULL returns null.
5302 * If flags is REG_RSN_RETURN_NAME returns an SV* containing the name
5303 * If flags is REG_RSN_RETURN_DATA returns the data SV* corresponding
5304 * to the parsed name as looked up in the RExC_paren_names hash.
5305 * If there is an error throws a vFAIL().. type exception.
5308 #define REG_RSN_RETURN_NULL 0
5309 #define REG_RSN_RETURN_NAME 1
5310 #define REG_RSN_RETURN_DATA 2
5313 S_reg_scan_name(pTHX_ RExC_state_t *pRExC_state, U32 flags)
5315 char *name_start = RExC_parse;
5317 PERL_ARGS_ASSERT_REG_SCAN_NAME;
5319 if (isIDFIRST_lazy_if(RExC_parse, UTF)) {
5320 /* skip IDFIRST by using do...while */
5323 RExC_parse += UTF8SKIP(RExC_parse);
5324 } while (isALNUM_utf8((U8*)RExC_parse));
5328 } while (isALNUM(*RExC_parse));
5333 = newSVpvn_flags(name_start, (int)(RExC_parse - name_start),
5334 SVs_TEMP | (UTF ? SVf_UTF8 : 0));
5335 if ( flags == REG_RSN_RETURN_NAME)
5337 else if (flags==REG_RSN_RETURN_DATA) {
5340 if ( ! sv_name ) /* should not happen*/
5341 Perl_croak(aTHX_ "panic: no svname in reg_scan_name");
5342 if (RExC_paren_names)
5343 he_str = hv_fetch_ent( RExC_paren_names, sv_name, 0, 0 );
5345 sv_dat = HeVAL(he_str);
5347 vFAIL("Reference to nonexistent named group");
5351 Perl_croak(aTHX_ "panic: bad flag in reg_scan_name");
5358 #define DEBUG_PARSE_MSG(funcname) DEBUG_PARSE_r({ \
5359 int rem=(int)(RExC_end - RExC_parse); \
5368 if (RExC_lastparse!=RExC_parse) \
5369 PerlIO_printf(Perl_debug_log," >%.*s%-*s", \
5372 iscut ? "..." : "<" \
5375 PerlIO_printf(Perl_debug_log,"%16s",""); \
5378 num = RExC_size + 1; \
5380 num=REG_NODE_NUM(RExC_emit); \
5381 if (RExC_lastnum!=num) \
5382 PerlIO_printf(Perl_debug_log,"|%4d",num); \
5384 PerlIO_printf(Perl_debug_log,"|%4s",""); \
5385 PerlIO_printf(Perl_debug_log,"|%*s%-4s", \
5386 (int)((depth*2)), "", \
5390 RExC_lastparse=RExC_parse; \
5395 #define DEBUG_PARSE(funcname) DEBUG_PARSE_r({ \
5396 DEBUG_PARSE_MSG((funcname)); \
5397 PerlIO_printf(Perl_debug_log,"%4s","\n"); \
5399 #define DEBUG_PARSE_FMT(funcname,fmt,args) DEBUG_PARSE_r({ \
5400 DEBUG_PARSE_MSG((funcname)); \
5401 PerlIO_printf(Perl_debug_log,fmt "\n",args); \
5404 - reg - regular expression, i.e. main body or parenthesized thing
5406 * Caller must absorb opening parenthesis.
5408 * Combining parenthesis handling with the base level of regular expression
5409 * is a trifle forced, but the need to tie the tails of the branches to what
5410 * follows makes it hard to avoid.
5412 #define REGTAIL(x,y,z) regtail((x),(y),(z),depth+1)
5414 #define REGTAIL_STUDY(x,y,z) regtail_study((x),(y),(z),depth+1)
5416 #define REGTAIL_STUDY(x,y,z) regtail((x),(y),(z),depth+1)
5420 S_reg(pTHX_ RExC_state_t *pRExC_state, I32 paren, I32 *flagp,U32 depth)
5421 /* paren: Parenthesized? 0=top, 1=(, inside: changed to letter. */
5424 register regnode *ret; /* Will be the head of the group. */
5425 register regnode *br;
5426 register regnode *lastbr;
5427 register regnode *ender = NULL;
5428 register I32 parno = 0;
5430 U32 oregflags = RExC_flags;
5431 bool have_branch = 0;
5433 I32 freeze_paren = 0;
5434 I32 after_freeze = 0;
5436 /* for (?g), (?gc), and (?o) warnings; warning
5437 about (?c) will warn about (?g) -- japhy */
5439 #define WASTED_O 0x01
5440 #define WASTED_G 0x02
5441 #define WASTED_C 0x04
5442 #define WASTED_GC (0x02|0x04)
5443 I32 wastedflags = 0x00;
5445 char * parse_start = RExC_parse; /* MJD */
5446 char * const oregcomp_parse = RExC_parse;
5448 GET_RE_DEBUG_FLAGS_DECL;
5450 PERL_ARGS_ASSERT_REG;
5451 DEBUG_PARSE("reg ");
5453 *flagp = 0; /* Tentatively. */
5456 /* Make an OPEN node, if parenthesized. */
5458 if ( *RExC_parse == '*') { /* (*VERB:ARG) */
5459 char *start_verb = RExC_parse;
5460 STRLEN verb_len = 0;
5461 char *start_arg = NULL;
5462 unsigned char op = 0;
5464 int internal_argval = 0; /* internal_argval is only useful if !argok */
5465 while ( *RExC_parse && *RExC_parse != ')' ) {
5466 if ( *RExC_parse == ':' ) {
5467 start_arg = RExC_parse + 1;
5473 verb_len = RExC_parse - start_verb;
5476 while ( *RExC_parse && *RExC_parse != ')' )
5478 if ( *RExC_parse != ')' )
5479 vFAIL("Unterminated verb pattern argument");
5480 if ( RExC_parse == start_arg )
5483 if ( *RExC_parse != ')' )
5484 vFAIL("Unterminated verb pattern");
5487 switch ( *start_verb ) {
5488 case 'A': /* (*ACCEPT) */
5489 if ( memEQs(start_verb,verb_len,"ACCEPT") ) {
5491 internal_argval = RExC_nestroot;
5494 case 'C': /* (*COMMIT) */
5495 if ( memEQs(start_verb,verb_len,"COMMIT") )
5498 case 'F': /* (*FAIL) */
5499 if ( verb_len==1 || memEQs(start_verb,verb_len,"FAIL") ) {
5504 case ':': /* (*:NAME) */
5505 case 'M': /* (*MARK:NAME) */
5506 if ( verb_len==0 || memEQs(start_verb,verb_len,"MARK") ) {
5511 case 'P': /* (*PRUNE) */
5512 if ( memEQs(start_verb,verb_len,"PRUNE") )
5515 case 'S': /* (*SKIP) */
5516 if ( memEQs(start_verb,verb_len,"SKIP") )
5519 case 'T': /* (*THEN) */
5520 /* [19:06] <TimToady> :: is then */
5521 if ( memEQs(start_verb,verb_len,"THEN") ) {
5523 RExC_seen |= REG_SEEN_CUTGROUP;
5529 vFAIL3("Unknown verb pattern '%.*s'",
5530 verb_len, start_verb);
5533 if ( start_arg && internal_argval ) {
5534 vFAIL3("Verb pattern '%.*s' may not have an argument",
5535 verb_len, start_verb);
5536 } else if ( argok < 0 && !start_arg ) {
5537 vFAIL3("Verb pattern '%.*s' has a mandatory argument",
5538 verb_len, start_verb);
5540 ret = reganode(pRExC_state, op, internal_argval);
5541 if ( ! internal_argval && ! SIZE_ONLY ) {
5543 SV *sv = newSVpvn( start_arg, RExC_parse - start_arg);
5544 ARG(ret) = add_data( pRExC_state, 1, "S" );
5545 RExC_rxi->data->data[ARG(ret)]=(void*)sv;
5552 if (!internal_argval)
5553 RExC_seen |= REG_SEEN_VERBARG;
5554 } else if ( start_arg ) {
5555 vFAIL3("Verb pattern '%.*s' may not have an argument",
5556 verb_len, start_verb);
5558 ret = reg_node(pRExC_state, op);
5560 nextchar(pRExC_state);
5563 if (*RExC_parse == '?') { /* (?...) */
5564 bool is_logical = 0;
5565 const char * const seqstart = RExC_parse;
5568 paren = *RExC_parse++;
5569 ret = NULL; /* For look-ahead/behind. */
5572 case 'P': /* (?P...) variants for those used to PCRE/Python */
5573 paren = *RExC_parse++;
5574 if ( paren == '<') /* (?P<...>) named capture */
5576 else if (paren == '>') { /* (?P>name) named recursion */
5577 goto named_recursion;
5579 else if (paren == '=') { /* (?P=...) named backref */
5580 /* this pretty much dupes the code for \k<NAME> in regatom(), if
5581 you change this make sure you change that */
5582 char* name_start = RExC_parse;
5584 SV *sv_dat = reg_scan_name(pRExC_state,
5585 SIZE_ONLY ? REG_RSN_RETURN_NULL : REG_RSN_RETURN_DATA);
5586 if (RExC_parse == name_start || *RExC_parse != ')')
5587 vFAIL2("Sequence %.3s... not terminated",parse_start);
5590 num = add_data( pRExC_state, 1, "S" );
5591 RExC_rxi->data->data[num]=(void*)sv_dat;
5592 SvREFCNT_inc_simple_void(sv_dat);
5595 ret = reganode(pRExC_state,
5596 (U8)(FOLD ? (LOC ? NREFFL : NREFF) : NREF),
5600 Set_Node_Offset(ret, parse_start+1);
5601 Set_Node_Cur_Length(ret); /* MJD */
5603 nextchar(pRExC_state);
5607 vFAIL3("Sequence (%.*s...) not recognized", RExC_parse-seqstart, seqstart);
5609 case '<': /* (?<...) */
5610 if (*RExC_parse == '!')
5612 else if (*RExC_parse != '=')
5618 case '\'': /* (?'...') */
5619 name_start= RExC_parse;
5620 svname = reg_scan_name(pRExC_state,
5621 SIZE_ONLY ? /* reverse test from the others */
5622 REG_RSN_RETURN_NAME :
5623 REG_RSN_RETURN_NULL);
5624 if (RExC_parse == name_start) {
5626 vFAIL3("Sequence (%.*s...) not recognized", RExC_parse-seqstart, seqstart);
5629 if (*RExC_parse != paren)
5630 vFAIL2("Sequence (?%c... not terminated",
5631 paren=='>' ? '<' : paren);
5635 if (!svname) /* shouldnt happen */
5637 "panic: reg_scan_name returned NULL");
5638 if (!RExC_paren_names) {
5639 RExC_paren_names= newHV();
5640 sv_2mortal((SV*)RExC_paren_names);
5642 RExC_paren_name_list= newAV();
5643 sv_2mortal((SV*)RExC_paren_name_list);
5646 he_str = hv_fetch_ent( RExC_paren_names, svname, 1, 0 );
5648 sv_dat = HeVAL(he_str);
5650 /* croak baby croak */
5652 "panic: paren_name hash element allocation failed");
5653 } else if ( SvPOK(sv_dat) ) {
5654 /* (?|...) can mean we have dupes so scan to check
5655 its already been stored. Maybe a flag indicating
5656 we are inside such a construct would be useful,
5657 but the arrays are likely to be quite small, so
5658 for now we punt -- dmq */
5659 IV count = SvIV(sv_dat);
5660 I32 *pv = (I32*)SvPVX(sv_dat);
5662 for ( i = 0 ; i < count ; i++ ) {
5663 if ( pv[i] == RExC_npar ) {
5669 pv = (I32*)SvGROW(sv_dat, SvCUR(sv_dat) + sizeof(I32)+1);
5670 SvCUR_set(sv_dat, SvCUR(sv_dat) + sizeof(I32));
5671 pv[count] = RExC_npar;
5672 SvIV_set(sv_dat, SvIVX(sv_dat) + 1);
5675 (void)SvUPGRADE(sv_dat,SVt_PVNV);
5676 sv_setpvn(sv_dat, (char *)&(RExC_npar), sizeof(I32));
5678 SvIV_set(sv_dat, 1);
5681 if (!av_store(RExC_paren_name_list, RExC_npar, SvREFCNT_inc(svname)))
5682 SvREFCNT_dec(svname);
5685 /*sv_dump(sv_dat);*/
5687 nextchar(pRExC_state);
5689 goto capturing_parens;
5691 RExC_seen |= REG_SEEN_LOOKBEHIND;
5693 case '=': /* (?=...) */
5694 RExC_seen_zerolen++;
5696 case '!': /* (?!...) */
5697 RExC_seen_zerolen++;
5698 if (*RExC_parse == ')') {
5699 ret=reg_node(pRExC_state, OPFAIL);
5700 nextchar(pRExC_state);
5704 case '|': /* (?|...) */
5705 /* branch reset, behave like a (?:...) except that
5706 buffers in alternations share the same numbers */
5708 after_freeze = freeze_paren = RExC_npar;
5710 case ':': /* (?:...) */
5711 case '>': /* (?>...) */
5713 case '$': /* (?$...) */
5714 case '@': /* (?@...) */
5715 vFAIL2("Sequence (?%c...) not implemented", (int)paren);
5717 case '#': /* (?#...) */
5718 while (*RExC_parse && *RExC_parse != ')')
5720 if (*RExC_parse != ')')
5721 FAIL("Sequence (?#... not terminated");
5722 nextchar(pRExC_state);
5725 case '0' : /* (?0) */
5726 case 'R' : /* (?R) */
5727 if (*RExC_parse != ')')
5728 FAIL("Sequence (?R) not terminated");
5729 ret = reg_node(pRExC_state, GOSTART);
5730 *flagp |= POSTPONED;
5731 nextchar(pRExC_state);
5734 { /* named and numeric backreferences */
5736 case '&': /* (?&NAME) */
5737 parse_start = RExC_parse - 1;
5740 SV *sv_dat = reg_scan_name(pRExC_state,
5741 SIZE_ONLY ? REG_RSN_RETURN_NULL : REG_RSN_RETURN_DATA);
5742 num = sv_dat ? *((I32 *)SvPVX(sv_dat)) : 0;
5744 goto gen_recurse_regop;
5747 if (!(RExC_parse[0] >= '1' && RExC_parse[0] <= '9')) {
5749 vFAIL("Illegal pattern");
5751 goto parse_recursion;
5753 case '-': /* (?-1) */
5754 if (!(RExC_parse[0] >= '1' && RExC_parse[0] <= '9')) {
5755 RExC_parse--; /* rewind to let it be handled later */
5759 case '1': case '2': case '3': case '4': /* (?1) */
5760 case '5': case '6': case '7': case '8': case '9':
5763 num = atoi(RExC_parse);
5764 parse_start = RExC_parse - 1; /* MJD */
5765 if (*RExC_parse == '-')
5767 while (isDIGIT(*RExC_parse))
5769 if (*RExC_parse!=')')
5770 vFAIL("Expecting close bracket");
5773 if ( paren == '-' ) {
5775 Diagram of capture buffer numbering.
5776 Top line is the normal capture buffer numbers
5777 Botton line is the negative indexing as from
5781 /(a(x)y)(a(b(c(?-2)d)e)f)(g(h))/
5785 num = RExC_npar + num;
5788 vFAIL("Reference to nonexistent group");
5790 } else if ( paren == '+' ) {
5791 num = RExC_npar + num - 1;
5794 ret = reganode(pRExC_state, GOSUB, num);
5796 if (num > (I32)RExC_rx->nparens) {
5798 vFAIL("Reference to nonexistent group");
5800 ARG2L_SET( ret, RExC_recurse_count++);
5802 DEBUG_OPTIMISE_MORE_r(PerlIO_printf(Perl_debug_log,
5803 "Recurse #%"UVuf" to %"IVdf"\n", (UV)ARG(ret), (IV)ARG2L(ret)));
5807 RExC_seen |= REG_SEEN_RECURSE;
5808 Set_Node_Length(ret, 1 + regarglen[OP(ret)]); /* MJD */
5809 Set_Node_Offset(ret, parse_start); /* MJD */
5811 *flagp |= POSTPONED;
5812 nextchar(pRExC_state);
5814 } /* named and numeric backreferences */
5817 case '?': /* (??...) */
5819 if (*RExC_parse != '{') {
5821 vFAIL3("Sequence (%.*s...) not recognized", RExC_parse-seqstart, seqstart);
5824 *flagp |= POSTPONED;
5825 paren = *RExC_parse++;
5827 case '{': /* (?{...}) */
5832 char *s = RExC_parse;
5834 RExC_seen_zerolen++;
5835 RExC_seen |= REG_SEEN_EVAL;
5836 while (count && (c = *RExC_parse)) {
5847 if (*RExC_parse != ')') {
5849 vFAIL("Sequence (?{...}) not terminated or not {}-balanced");
5853 OP_4tree *sop, *rop;
5854 SV * const sv = newSVpvn(s, RExC_parse - 1 - s);
5857 Perl_save_re_context(aTHX);
5858 rop = sv_compile_2op(sv, &sop, "re", &pad);
5859 sop->op_private |= OPpREFCOUNTED;
5860 /* re_dup will OpREFCNT_inc */
5861 OpREFCNT_set(sop, 1);
5864 n = add_data(pRExC_state, 3, "nop");
5865 RExC_rxi->data->data[n] = (void*)rop;
5866 RExC_rxi->data->data[n+1] = (void*)sop;
5867 RExC_rxi->data->data[n+2] = (void*)pad;
5870 else { /* First pass */
5871 if (PL_reginterp_cnt < ++RExC_seen_evals
5873 /* No compiled RE interpolated, has runtime
5874 components ===> unsafe. */
5875 FAIL("Eval-group not allowed at runtime, use re 'eval'");
5876 if (PL_tainting && PL_tainted)
5877 FAIL("Eval-group in insecure regular expression");
5878 #if PERL_VERSION > 8
5879 if (IN_PERL_COMPILETIME)
5884 nextchar(pRExC_state);
5886 ret = reg_node(pRExC_state, LOGICAL);
5889 REGTAIL(pRExC_state, ret, reganode(pRExC_state, EVAL, n));
5890 /* deal with the length of this later - MJD */
5893 ret = reganode(pRExC_state, EVAL, n);
5894 Set_Node_Length(ret, RExC_parse - parse_start + 1);
5895 Set_Node_Offset(ret, parse_start);
5898 case '(': /* (?(?{...})...) and (?(?=...)...) */
5901 if (RExC_parse[0] == '?') { /* (?(?...)) */
5902 if (RExC_parse[1] == '=' || RExC_parse[1] == '!'
5903 || RExC_parse[1] == '<'
5904 || RExC_parse[1] == '{') { /* Lookahead or eval. */
5907 ret = reg_node(pRExC_state, LOGICAL);
5910 REGTAIL(pRExC_state, ret, reg(pRExC_state, 1, &flag,depth+1));
5914 else if ( RExC_parse[0] == '<' /* (?(<NAME>)...) */
5915 || RExC_parse[0] == '\'' ) /* (?('NAME')...) */
5917 char ch = RExC_parse[0] == '<' ? '>' : '\'';
5918 char *name_start= RExC_parse++;
5920 SV *sv_dat=reg_scan_name(pRExC_state,
5921 SIZE_ONLY ? REG_RSN_RETURN_NULL : REG_RSN_RETURN_DATA);
5922 if (RExC_parse == name_start || *RExC_parse != ch)
5923 vFAIL2("Sequence (?(%c... not terminated",
5924 (ch == '>' ? '<' : ch));
5927 num = add_data( pRExC_state, 1, "S" );
5928 RExC_rxi->data->data[num]=(void*)sv_dat;
5929 SvREFCNT_inc_simple_void(sv_dat);
5931 ret = reganode(pRExC_state,NGROUPP,num);
5932 goto insert_if_check_paren;
5934 else if (RExC_parse[0] == 'D' &&
5935 RExC_parse[1] == 'E' &&
5936 RExC_parse[2] == 'F' &&
5937 RExC_parse[3] == 'I' &&
5938 RExC_parse[4] == 'N' &&
5939 RExC_parse[5] == 'E')
5941 ret = reganode(pRExC_state,DEFINEP,0);
5944 goto insert_if_check_paren;
5946 else if (RExC_parse[0] == 'R') {
5949 if (RExC_parse[0] >= '1' && RExC_parse[0] <= '9' ) {
5950 parno = atoi(RExC_parse++);
5951 while (isDIGIT(*RExC_parse))
5953 } else if (RExC_parse[0] == '&') {
5956 sv_dat = reg_scan_name(pRExC_state,
5957 SIZE_ONLY ? REG_RSN_RETURN_NULL : REG_RSN_RETURN_DATA);
5958 parno = sv_dat ? *((I32 *)SvPVX(sv_dat)) : 0;
5960 ret = reganode(pRExC_state,INSUBP,parno);
5961 goto insert_if_check_paren;
5963 else if (RExC_parse[0] >= '1' && RExC_parse[0] <= '9' ) {
5966 parno = atoi(RExC_parse++);
5968 while (isDIGIT(*RExC_parse))
5970 ret = reganode(pRExC_state, GROUPP, parno);
5972 insert_if_check_paren:
5973 if ((c = *nextchar(pRExC_state)) != ')')
5974 vFAIL("Switch condition not recognized");
5976 REGTAIL(pRExC_state, ret, reganode(pRExC_state, IFTHEN, 0));
5977 br = regbranch(pRExC_state, &flags, 1,depth+1);
5979 br = reganode(pRExC_state, LONGJMP, 0);
5981 REGTAIL(pRExC_state, br, reganode(pRExC_state, LONGJMP, 0));
5982 c = *nextchar(pRExC_state);
5987 vFAIL("(?(DEFINE)....) does not allow branches");
5988 lastbr = reganode(pRExC_state, IFTHEN, 0); /* Fake one for optimizer. */
5989 regbranch(pRExC_state, &flags, 1,depth+1);
5990 REGTAIL(pRExC_state, ret, lastbr);
5993 c = *nextchar(pRExC_state);
5998 vFAIL("Switch (?(condition)... contains too many branches");
5999 ender = reg_node(pRExC_state, TAIL);
6000 REGTAIL(pRExC_state, br, ender);
6002 REGTAIL(pRExC_state, lastbr, ender);
6003 REGTAIL(pRExC_state, NEXTOPER(NEXTOPER(lastbr)), ender);
6006 REGTAIL(pRExC_state, ret, ender);
6007 RExC_size++; /* XXX WHY do we need this?!!
6008 For large programs it seems to be required
6009 but I can't figure out why. -- dmq*/
6013 vFAIL2("Unknown switch condition (?(%.2s", RExC_parse);
6017 RExC_parse--; /* for vFAIL to print correctly */
6018 vFAIL("Sequence (? incomplete");
6022 parse_flags: /* (?i) */
6024 U32 posflags = 0, negflags = 0;
6025 U32 *flagsp = &posflags;
6027 while (*RExC_parse) {
6028 /* && strchr("iogcmsx", *RExC_parse) */
6029 /* (?g), (?gc) and (?o) are useless here
6030 and must be globally applied -- japhy */
6031 switch (*RExC_parse) {
6032 CASE_STD_PMMOD_FLAGS_PARSE_SET(flagsp);
6033 case ONCE_PAT_MOD: /* 'o' */
6034 case GLOBAL_PAT_MOD: /* 'g' */
6035 if (SIZE_ONLY && ckWARN(WARN_REGEXP)) {
6036 const I32 wflagbit = *RExC_parse == 'o' ? WASTED_O : WASTED_G;
6037 if (! (wastedflags & wflagbit) ) {
6038 wastedflags |= wflagbit;
6041 "Useless (%s%c) - %suse /%c modifier",
6042 flagsp == &negflags ? "?-" : "?",
6044 flagsp == &negflags ? "don't " : "",
6051 case CONTINUE_PAT_MOD: /* 'c' */
6052 if (SIZE_ONLY && ckWARN(WARN_REGEXP)) {
6053 if (! (wastedflags & WASTED_C) ) {
6054 wastedflags |= WASTED_GC;
6057 "Useless (%sc) - %suse /gc modifier",
6058 flagsp == &negflags ? "?-" : "?",
6059 flagsp == &negflags ? "don't " : ""
6064 case KEEPCOPY_PAT_MOD: /* 'p' */
6065 if (flagsp == &negflags) {
6066 if (SIZE_ONLY && ckWARN(WARN_REGEXP))
6067 vWARN(RExC_parse + 1,"Useless use of (?-p)");
6069 *flagsp |= RXf_PMf_KEEPCOPY;
6073 if (flagsp == &negflags) {
6075 vFAIL3("Sequence (%.*s...) not recognized", RExC_parse-seqstart, seqstart);
6079 wastedflags = 0; /* reset so (?g-c) warns twice */
6085 RExC_flags |= posflags;
6086 RExC_flags &= ~negflags;
6088 oregflags |= posflags;
6089 oregflags &= ~negflags;
6091 nextchar(pRExC_state);
6102 vFAIL3("Sequence (%.*s...) not recognized", RExC_parse-seqstart, seqstart);
6107 }} /* one for the default block, one for the switch */
6114 ret = reganode(pRExC_state, OPEN, parno);
6117 RExC_nestroot = parno;
6118 if (RExC_seen & REG_SEEN_RECURSE
6119 && !RExC_open_parens[parno-1])
6121 DEBUG_OPTIMISE_MORE_r(PerlIO_printf(Perl_debug_log,
6122 "Setting open paren #%"IVdf" to %d\n",
6123 (IV)parno, REG_NODE_NUM(ret)));
6124 RExC_open_parens[parno-1]= ret;
6127 Set_Node_Length(ret, 1); /* MJD */
6128 Set_Node_Offset(ret, RExC_parse); /* MJD */
6136 /* Pick up the branches, linking them together. */
6137 parse_start = RExC_parse; /* MJD */
6138 br = regbranch(pRExC_state, &flags, 1,depth+1);
6139 /* branch_len = (paren != 0); */
6143 if (*RExC_parse == '|') {
6144 if (!SIZE_ONLY && RExC_extralen) {
6145 reginsert(pRExC_state, BRANCHJ, br, depth+1);
6148 reginsert(pRExC_state, BRANCH, br, depth+1);
6149 Set_Node_Length(br, paren != 0);
6150 Set_Node_Offset_To_R(br-RExC_emit_start, parse_start-RExC_start);
6154 RExC_extralen += 1; /* For BRANCHJ-BRANCH. */
6156 else if (paren == ':') {
6157 *flagp |= flags&SIMPLE;
6159 if (is_open) { /* Starts with OPEN. */
6160 REGTAIL(pRExC_state, ret, br); /* OPEN -> first. */
6162 else if (paren != '?') /* Not Conditional */
6164 *flagp |= flags & (SPSTART | HASWIDTH | POSTPONED);
6166 while (*RExC_parse == '|') {
6167 if (!SIZE_ONLY && RExC_extralen) {
6168 ender = reganode(pRExC_state, LONGJMP,0);
6169 REGTAIL(pRExC_state, NEXTOPER(NEXTOPER(lastbr)), ender); /* Append to the previous. */
6172 RExC_extralen += 2; /* Account for LONGJMP. */
6173 nextchar(pRExC_state);
6175 if (RExC_npar > after_freeze)
6176 after_freeze = RExC_npar;
6177 RExC_npar = freeze_paren;
6179 br = regbranch(pRExC_state, &flags, 0, depth+1);
6183 REGTAIL(pRExC_state, lastbr, br); /* BRANCH -> BRANCH. */
6185 *flagp |= flags & (SPSTART | HASWIDTH | POSTPONED);
6188 if (have_branch || paren != ':') {
6189 /* Make a closing node, and hook it on the end. */
6192 ender = reg_node(pRExC_state, TAIL);
6195 ender = reganode(pRExC_state, CLOSE, parno);
6196 if (!SIZE_ONLY && RExC_seen & REG_SEEN_RECURSE) {
6197 DEBUG_OPTIMISE_MORE_r(PerlIO_printf(Perl_debug_log,
6198 "Setting close paren #%"IVdf" to %d\n",
6199 (IV)parno, REG_NODE_NUM(ender)));
6200 RExC_close_parens[parno-1]= ender;
6201 if (RExC_nestroot == parno)
6204 Set_Node_Offset(ender,RExC_parse+1); /* MJD */
6205 Set_Node_Length(ender,1); /* MJD */
6211 *flagp &= ~HASWIDTH;
6214 ender = reg_node(pRExC_state, SUCCEED);
6217 ender = reg_node(pRExC_state, END);
6219 assert(!RExC_opend); /* there can only be one! */
6224 REGTAIL(pRExC_state, lastbr, ender);
6226 if (have_branch && !SIZE_ONLY) {
6228 RExC_seen |= REG_TOP_LEVEL_BRANCHES;
6230 /* Hook the tails of the branches to the closing node. */
6231 for (br = ret; br; br = regnext(br)) {
6232 const U8 op = PL_regkind[OP(br)];
6234 REGTAIL_STUDY(pRExC_state, NEXTOPER(br), ender);
6236 else if (op == BRANCHJ) {
6237 REGTAIL_STUDY(pRExC_state, NEXTOPER(NEXTOPER(br)), ender);
6245 static const char parens[] = "=!<,>";
6247 if (paren && (p = strchr(parens, paren))) {
6248 U8 node = ((p - parens) % 2) ? UNLESSM : IFMATCH;
6249 int flag = (p - parens) > 1;
6252 node = SUSPEND, flag = 0;
6253 reginsert(pRExC_state, node,ret, depth+1);
6254 Set_Node_Cur_Length(ret);
6255 Set_Node_Offset(ret, parse_start + 1);
6257 REGTAIL_STUDY(pRExC_state, ret, reg_node(pRExC_state, TAIL));
6261 /* Check for proper termination. */
6263 RExC_flags = oregflags;
6264 if (RExC_parse >= RExC_end || *nextchar(pRExC_state) != ')') {
6265 RExC_parse = oregcomp_parse;
6266 vFAIL("Unmatched (");
6269 else if (!paren && RExC_parse < RExC_end) {
6270 if (*RExC_parse == ')') {
6272 vFAIL("Unmatched )");
6275 FAIL("Junk on end of regexp"); /* "Can't happen". */
6279 RExC_npar = after_freeze;
6284 - regbranch - one alternative of an | operator
6286 * Implements the concatenation operator.
6289 S_regbranch(pTHX_ RExC_state_t *pRExC_state, I32 *flagp, I32 first, U32 depth)
6292 register regnode *ret;
6293 register regnode *chain = NULL;
6294 register regnode *latest;
6295 I32 flags = 0, c = 0;
6296 GET_RE_DEBUG_FLAGS_DECL;
6298 PERL_ARGS_ASSERT_REGBRANCH;
6300 DEBUG_PARSE("brnc");
6305 if (!SIZE_ONLY && RExC_extralen)
6306 ret = reganode(pRExC_state, BRANCHJ,0);
6308 ret = reg_node(pRExC_state, BRANCH);
6309 Set_Node_Length(ret, 1);
6313 if (!first && SIZE_ONLY)
6314 RExC_extralen += 1; /* BRANCHJ */
6316 *flagp = WORST; /* Tentatively. */
6319 nextchar(pRExC_state);
6320 while (RExC_parse < RExC_end && *RExC_parse != '|' && *RExC_parse != ')') {
6322 latest = regpiece(pRExC_state, &flags,depth+1);
6323 if (latest == NULL) {
6324 if (flags & TRYAGAIN)
6328 else if (ret == NULL)
6330 *flagp |= flags&(HASWIDTH|POSTPONED);
6331 if (chain == NULL) /* First piece. */
6332 *flagp |= flags&SPSTART;
6335 REGTAIL(pRExC_state, chain, latest);
6340 if (chain == NULL) { /* Loop ran zero times. */
6341 chain = reg_node(pRExC_state, NOTHING);
6346 *flagp |= flags&SIMPLE;
6353 - regpiece - something followed by possible [*+?]
6355 * Note that the branching code sequences used for ? and the general cases
6356 * of * and + are somewhat optimized: they use the same NOTHING node as
6357 * both the endmarker for their branch list and the body of the last branch.
6358 * It might seem that this node could be dispensed with entirely, but the
6359 * endmarker role is not redundant.
6362 S_regpiece(pTHX_ RExC_state_t *pRExC_state, I32 *flagp, U32 depth)
6365 register regnode *ret;
6367 register char *next;
6369 const char * const origparse = RExC_parse;
6371 I32 max = REG_INFTY;
6373 const char *maxpos = NULL;
6374 GET_RE_DEBUG_FLAGS_DECL;
6376 PERL_ARGS_ASSERT_REGPIECE;
6378 DEBUG_PARSE("piec");
6380 ret = regatom(pRExC_state, &flags,depth+1);
6382 if (flags & TRYAGAIN)
6389 if (op == '{' && regcurly(RExC_parse)) {
6391 parse_start = RExC_parse; /* MJD */
6392 next = RExC_parse + 1;
6393 while (isDIGIT(*next) || *next == ',') {
6402 if (*next == '}') { /* got one */
6406 min = atoi(RExC_parse);
6410 maxpos = RExC_parse;
6412 if (!max && *maxpos != '0')
6413 max = REG_INFTY; /* meaning "infinity" */
6414 else if (max >= REG_INFTY)
6415 vFAIL2("Quantifier in {,} bigger than %d", REG_INFTY - 1);
6417 nextchar(pRExC_state);
6420 if ((flags&SIMPLE)) {
6421 RExC_naughty += 2 + RExC_naughty / 2;
6422 reginsert(pRExC_state, CURLY, ret, depth+1);
6423 Set_Node_Offset(ret, parse_start+1); /* MJD */
6424 Set_Node_Cur_Length(ret);
6427 regnode * const w = reg_node(pRExC_state, WHILEM);
6430 REGTAIL(pRExC_state, ret, w);
6431 if (!SIZE_ONLY && RExC_extralen) {
6432 reginsert(pRExC_state, LONGJMP,ret, depth+1);
6433 reginsert(pRExC_state, NOTHING,ret, depth+1);
6434 NEXT_OFF(ret) = 3; /* Go over LONGJMP. */
6436 reginsert(pRExC_state, CURLYX,ret, depth+1);
6438 Set_Node_Offset(ret, parse_start+1);
6439 Set_Node_Length(ret,
6440 op == '{' ? (RExC_parse - parse_start) : 1);
6442 if (!SIZE_ONLY && RExC_extralen)
6443 NEXT_OFF(ret) = 3; /* Go over NOTHING to LONGJMP. */
6444 REGTAIL(pRExC_state, ret, reg_node(pRExC_state, NOTHING));
6446 RExC_whilem_seen++, RExC_extralen += 3;
6447 RExC_naughty += 4 + RExC_naughty; /* compound interest */
6455 if (max && max < min)
6456 vFAIL("Can't do {n,m} with n > m");
6458 ARG1_SET(ret, (U16)min);
6459 ARG2_SET(ret, (U16)max);
6471 #if 0 /* Now runtime fix should be reliable. */
6473 /* if this is reinstated, don't forget to put this back into perldiag:
6475 =item Regexp *+ operand could be empty at {#} in regex m/%s/
6477 (F) The part of the regexp subject to either the * or + quantifier
6478 could match an empty string. The {#} shows in the regular
6479 expression about where the problem was discovered.
6483 if (!(flags&HASWIDTH) && op != '?')
6484 vFAIL("Regexp *+ operand could be empty");
6487 parse_start = RExC_parse;
6488 nextchar(pRExC_state);
6490 *flagp = (op != '+') ? (WORST|SPSTART|HASWIDTH) : (WORST|HASWIDTH);
6492 if (op == '*' && (flags&SIMPLE)) {
6493 reginsert(pRExC_state, STAR, ret, depth+1);
6497 else if (op == '*') {
6501 else if (op == '+' && (flags&SIMPLE)) {
6502 reginsert(pRExC_state, PLUS, ret, depth+1);
6506 else if (op == '+') {
6510 else if (op == '?') {
6515 if (!SIZE_ONLY && !(flags&(HASWIDTH|POSTPONED)) && max > REG_INFTY/3 && ckWARN(WARN_REGEXP)) {
6517 "%.*s matches null string many times",
6518 (int)(RExC_parse >= origparse ? RExC_parse - origparse : 0),
6522 if (RExC_parse < RExC_end && *RExC_parse == '?') {
6523 nextchar(pRExC_state);
6524 reginsert(pRExC_state, MINMOD, ret, depth+1);
6525 REGTAIL(pRExC_state, ret, ret + NODE_STEP_REGNODE);
6527 #ifndef REG_ALLOW_MINMOD_SUSPEND
6530 if (RExC_parse < RExC_end && *RExC_parse == '+') {
6532 nextchar(pRExC_state);
6533 ender = reg_node(pRExC_state, SUCCEED);
6534 REGTAIL(pRExC_state, ret, ender);
6535 reginsert(pRExC_state, SUSPEND, ret, depth+1);
6537 ender = reg_node(pRExC_state, TAIL);
6538 REGTAIL(pRExC_state, ret, ender);
6542 if (RExC_parse < RExC_end && ISMULT2(RExC_parse)) {
6544 vFAIL("Nested quantifiers");
6551 /* reg_namedseq(pRExC_state,UVp)
6553 This is expected to be called by a parser routine that has
6554 recognized'\N' and needs to handle the rest. RExC_parse is
6555 expected to point at the first char following the N at the time
6558 If valuep is non-null then it is assumed that we are parsing inside
6559 of a charclass definition and the first codepoint in the resolved
6560 string is returned via *valuep and the routine will return NULL.
6561 In this mode if a multichar string is returned from the charnames
6562 handler a warning will be issued, and only the first char in the
6563 sequence will be examined. If the string returned is zero length
6564 then the value of *valuep is undefined and NON-NULL will
6565 be returned to indicate failure. (This will NOT be a valid pointer
6568 If value is null then it is assumed that we are parsing normal text
6569 and inserts a new EXACT node into the program containing the resolved
6570 string and returns a pointer to the new node. If the string is
6571 zerolength a NOTHING node is emitted.
6573 On success RExC_parse is set to the char following the endbrace.
6574 Parsing failures will generate a fatal errorvia vFAIL(...)
6576 NOTE: We cache all results from the charnames handler locally in
6577 the RExC_charnames hash (created on first use) to prevent a charnames
6578 handler from playing silly-buggers and returning a short string and
6579 then a long string for a given pattern. Since the regexp program
6580 size is calculated during an initial parse this would result
6581 in a buffer overrun so we cache to prevent the charname result from
6582 changing during the course of the parse.
6586 S_reg_namedseq(pTHX_ RExC_state_t *pRExC_state, UV *valuep)
6588 char * name; /* start of the content of the name */
6589 char * endbrace; /* endbrace following the name */
6592 STRLEN len; /* this has various purposes throughout the code */
6593 bool cached = 0; /* if this is true then we shouldn't refcount dev sv_str */
6594 regnode *ret = NULL;
6596 PERL_ARGS_ASSERT_REG_NAMEDSEQ;
6598 if (*RExC_parse != '{') {
6599 vFAIL("Missing braces on \\N{}");
6601 name = RExC_parse+1;
6602 endbrace = strchr(RExC_parse, '}');
6605 vFAIL("Missing right brace on \\N{}");
6607 RExC_parse = endbrace + 1;
6610 /* RExC_parse points at the beginning brace,
6611 endbrace points at the last */
6612 if ( name[0]=='U' && name[1]=='+' ) {
6613 /* its a "Unicode hex" notation {U+89AB} */
6614 I32 fl = PERL_SCAN_ALLOW_UNDERSCORES
6615 | PERL_SCAN_DISALLOW_PREFIX
6616 | (SIZE_ONLY ? PERL_SCAN_SILENT_ILLDIGIT : 0);
6619 len = (STRLEN)(endbrace - name - 2);
6620 cp = grok_hex(name + 2, &len, &fl, NULL);
6621 if ( len != (STRLEN)(endbrace - name - 2) ) {
6631 sv_str= newSVpvn(&string, 1);
6633 /* fetch the charnames handler for this scope */
6634 HV * const table = GvHV(PL_hintgv);
6636 hv_fetchs(table, "charnames", FALSE) :
6638 SV *cv= cvp ? *cvp : NULL;
6641 /* create an SV with the name as argument */
6642 sv_name = newSVpvn(name, endbrace - name);
6644 if (!table || !(PL_hints & HINT_LOCALIZE_HH)) {
6645 vFAIL2("Constant(\\N{%s}) unknown: "
6646 "(possibly a missing \"use charnames ...\")",
6649 if (!cvp || !SvOK(*cvp)) { /* when $^H{charnames} = undef; */
6650 vFAIL2("Constant(\\N{%s}): "
6651 "$^H{charnames} is not defined",SvPVX(sv_name));
6656 if (!RExC_charnames) {
6657 /* make sure our cache is allocated */
6658 RExC_charnames = newHV();
6659 sv_2mortal((SV*)RExC_charnames);
6661 /* see if we have looked this one up before */
6662 he_str = hv_fetch_ent( RExC_charnames, sv_name, 0, 0 );
6664 sv_str = HeVAL(he_str);
6677 count= call_sv(cv, G_SCALAR);
6679 if (count == 1) { /* XXXX is this right? dmq */
6681 SvREFCNT_inc_simple_void(sv_str);
6689 if ( !sv_str || !SvOK(sv_str) ) {
6690 vFAIL2("Constant(\\N{%s}): Call to &{$^H{charnames}} "
6691 "did not return a defined value",SvPVX(sv_name));
6693 if (hv_store_ent( RExC_charnames, sv_name, sv_str, 0))
6698 char *p = SvPV(sv_str, len);
6701 if ( SvUTF8(sv_str) ) {
6702 *valuep = utf8_to_uvchr((U8*)p, &numlen);
6706 We have to turn on utf8 for high bit chars otherwise
6707 we get failures with
6709 "ss" =~ /[\N{LATIN SMALL LETTER SHARP S}]/i
6710 "SS" =~ /[\N{LATIN SMALL LETTER SHARP S}]/i
6712 This is different from what \x{} would do with the same
6713 codepoint, where the condition is > 0xFF.
6720 /* warn if we havent used the whole string? */
6722 if (numlen<len && SIZE_ONLY && ckWARN(WARN_REGEXP)) {
6724 "Ignoring excess chars from \\N{%s} in character class",
6728 } else if (SIZE_ONLY && ckWARN(WARN_REGEXP)) {
6730 "Ignoring zero length \\N{%s} in character class",
6735 SvREFCNT_dec(sv_name);
6737 SvREFCNT_dec(sv_str);
6738 return len ? NULL : (regnode *)&len;
6739 } else if(SvCUR(sv_str)) {
6745 char * parse_start = name-3; /* needed for the offsets */
6747 GET_RE_DEBUG_FLAGS_DECL; /* needed for the offsets */
6749 ret = reg_node(pRExC_state,
6750 (U8)(FOLD ? (LOC ? EXACTFL : EXACTF) : EXACT));
6753 if ( RExC_utf8 && !SvUTF8(sv_str) ) {
6754 sv_utf8_upgrade(sv_str);
6755 } else if ( !RExC_utf8 && SvUTF8(sv_str) ) {
6759 p = SvPV(sv_str, len);
6761 /* len is the length written, charlen is the size the char read */
6762 for ( len = 0; p < pend; p += charlen ) {
6764 UV uvc = utf8_to_uvchr((U8*)p, &charlen);
6766 STRLEN foldlen,numlen;
6767 U8 tmpbuf[UTF8_MAXBYTES_CASE+1], *foldbuf;
6768 uvc = toFOLD_uni(uvc, tmpbuf, &foldlen);
6769 /* Emit all the Unicode characters. */
6771 for (foldbuf = tmpbuf;
6775 uvc = utf8_to_uvchr(foldbuf, &numlen);
6777 const STRLEN unilen = reguni(pRExC_state, uvc, s);
6780 /* In EBCDIC the numlen
6781 * and unilen can differ. */
6783 if (numlen >= foldlen)
6787 break; /* "Can't happen." */
6790 const STRLEN unilen = reguni(pRExC_state, uvc, s);
6802 RExC_size += STR_SZ(len);
6805 RExC_emit += STR_SZ(len);
6807 Set_Node_Cur_Length(ret); /* MJD */
6809 nextchar(pRExC_state);
6811 ret = reg_node(pRExC_state,NOTHING);
6814 SvREFCNT_dec(sv_str);
6817 SvREFCNT_dec(sv_name);
6827 * It returns the code point in utf8 for the value in *encp.
6828 * value: a code value in the source encoding
6829 * encp: a pointer to an Encode object
6831 * If the result from Encode is not a single character,
6832 * it returns U+FFFD (Replacement character) and sets *encp to NULL.
6835 S_reg_recode(pTHX_ const char value, SV **encp)
6838 SV * const sv = newSVpvn_flags(&value, numlen, SVs_TEMP);
6839 const char * const s = *encp ? sv_recode_to_utf8(sv, *encp) : SvPVX(sv);
6840 const STRLEN newlen = SvCUR(sv);
6841 UV uv = UNICODE_REPLACEMENT;
6843 PERL_ARGS_ASSERT_REG_RECODE;
6847 ? utf8n_to_uvchr((U8*)s, newlen, &numlen, UTF8_ALLOW_DEFAULT)
6850 if (!newlen || numlen != newlen) {
6851 uv = UNICODE_REPLACEMENT;
6859 - regatom - the lowest level
6861 Try to identify anything special at the start of the pattern. If there
6862 is, then handle it as required. This may involve generating a single regop,
6863 such as for an assertion; or it may involve recursing, such as to
6864 handle a () structure.
6866 If the string doesn't start with something special then we gobble up
6867 as much literal text as we can.
6869 Once we have been able to handle whatever type of thing started the
6870 sequence, we return.
6872 Note: we have to be careful with escapes, as they can be both literal
6873 and special, and in the case of \10 and friends can either, depending
6874 on context. Specifically there are two seperate switches for handling
6875 escape sequences, with the one for handling literal escapes requiring
6876 a dummy entry for all of the special escapes that are actually handled
6881 S_regatom(pTHX_ RExC_state_t *pRExC_state, I32 *flagp, U32 depth)
6884 register regnode *ret = NULL;
6886 char *parse_start = RExC_parse;
6887 GET_RE_DEBUG_FLAGS_DECL;
6888 DEBUG_PARSE("atom");
6889 *flagp = WORST; /* Tentatively. */
6891 PERL_ARGS_ASSERT_REGATOM;
6894 switch ((U8)*RExC_parse) {
6896 RExC_seen_zerolen++;
6897 nextchar(pRExC_state);
6898 if (RExC_flags & RXf_PMf_MULTILINE)
6899 ret = reg_node(pRExC_state, MBOL);
6900 else if (RExC_flags & RXf_PMf_SINGLELINE)
6901 ret = reg_node(pRExC_state, SBOL);
6903 ret = reg_node(pRExC_state, BOL);
6904 Set_Node_Length(ret, 1); /* MJD */
6907 nextchar(pRExC_state);
6909 RExC_seen_zerolen++;
6910 if (RExC_flags & RXf_PMf_MULTILINE)
6911 ret = reg_node(pRExC_state, MEOL);
6912 else if (RExC_flags & RXf_PMf_SINGLELINE)
6913 ret = reg_node(pRExC_state, SEOL);
6915 ret = reg_node(pRExC_state, EOL);
6916 Set_Node_Length(ret, 1); /* MJD */
6919 nextchar(pRExC_state);
6920 if (RExC_flags & RXf_PMf_SINGLELINE)
6921 ret = reg_node(pRExC_state, SANY);
6923 ret = reg_node(pRExC_state, REG_ANY);
6924 *flagp |= HASWIDTH|SIMPLE;
6926 Set_Node_Length(ret, 1); /* MJD */
6930 char * const oregcomp_parse = ++RExC_parse;
6931 ret = regclass(pRExC_state,depth+1);
6932 if (*RExC_parse != ']') {
6933 RExC_parse = oregcomp_parse;
6934 vFAIL("Unmatched [");
6936 nextchar(pRExC_state);
6937 *flagp |= HASWIDTH|SIMPLE;
6938 Set_Node_Length(ret, RExC_parse - oregcomp_parse + 1); /* MJD */
6942 nextchar(pRExC_state);
6943 ret = reg(pRExC_state, 1, &flags,depth+1);
6945 if (flags & TRYAGAIN) {
6946 if (RExC_parse == RExC_end) {
6947 /* Make parent create an empty node if needed. */
6955 *flagp |= flags&(HASWIDTH|SPSTART|SIMPLE|POSTPONED);
6959 if (flags & TRYAGAIN) {
6963 vFAIL("Internal urp");
6964 /* Supposed to be caught earlier. */
6967 if (!regcurly(RExC_parse)) {
6976 vFAIL("Quantifier follows nothing");
6984 len=0; /* silence a spurious compiler warning */
6985 if ((cp = what_len_TRICKYFOLD_safe(RExC_parse,RExC_end,UTF,len))) {
6986 *flagp |= HASWIDTH; /* could be SIMPLE too, but needs a handler in regexec.regrepeat */
6987 RExC_parse+=len-1; /* we get one from nextchar() as well. :-( */
6988 ret = reganode(pRExC_state, FOLDCHAR, cp);
6989 Set_Node_Length(ret, 1); /* MJD */
6990 nextchar(pRExC_state); /* kill whitespace under /x */
6998 This switch handles escape sequences that resolve to some kind
6999 of special regop and not to literal text. Escape sequnces that
7000 resolve to literal text are handled below in the switch marked
7003 Every entry in this switch *must* have a corresponding entry
7004 in the literal escape switch. However, the opposite is not
7005 required, as the default for this switch is to jump to the
7006 literal text handling code.
7008 switch ((U8)*++RExC_parse) {
7013 /* Special Escapes */
7015 RExC_seen_zerolen++;
7016 ret = reg_node(pRExC_state, SBOL);
7018 goto finish_meta_pat;
7020 ret = reg_node(pRExC_state, GPOS);
7021 RExC_seen |= REG_SEEN_GPOS;
7023 goto finish_meta_pat;
7025 RExC_seen_zerolen++;
7026 ret = reg_node(pRExC_state, KEEPS);
7028 /* XXX:dmq : disabling in-place substitution seems to
7029 * be necessary here to avoid cases of memory corruption, as
7030 * with: C<$_="x" x 80; s/x\K/y/> -- rgs
7032 RExC_seen |= REG_SEEN_LOOKBEHIND;
7033 goto finish_meta_pat;
7035 ret = reg_node(pRExC_state, SEOL);
7037 RExC_seen_zerolen++; /* Do not optimize RE away */
7038 goto finish_meta_pat;
7040 ret = reg_node(pRExC_state, EOS);
7042 RExC_seen_zerolen++; /* Do not optimize RE away */
7043 goto finish_meta_pat;
7045 ret = reg_node(pRExC_state, CANY);
7046 RExC_seen |= REG_SEEN_CANY;
7047 *flagp |= HASWIDTH|SIMPLE;
7048 goto finish_meta_pat;
7050 ret = reg_node(pRExC_state, CLUMP);
7052 goto finish_meta_pat;
7054 ret = reg_node(pRExC_state, (U8)(LOC ? ALNUML : ALNUM));
7055 *flagp |= HASWIDTH|SIMPLE;
7056 goto finish_meta_pat;
7058 ret = reg_node(pRExC_state, (U8)(LOC ? NALNUML : NALNUM));
7059 *flagp |= HASWIDTH|SIMPLE;
7060 goto finish_meta_pat;
7062 RExC_seen_zerolen++;
7063 RExC_seen |= REG_SEEN_LOOKBEHIND;
7064 ret = reg_node(pRExC_state, (U8)(LOC ? BOUNDL : BOUND));
7066 goto finish_meta_pat;
7068 RExC_seen_zerolen++;
7069 RExC_seen |= REG_SEEN_LOOKBEHIND;
7070 ret = reg_node(pRExC_state, (U8)(LOC ? NBOUNDL : NBOUND));
7072 goto finish_meta_pat;
7074 ret = reg_node(pRExC_state, (U8)(LOC ? SPACEL : SPACE));
7075 *flagp |= HASWIDTH|SIMPLE;
7076 goto finish_meta_pat;
7078 ret = reg_node(pRExC_state, (U8)(LOC ? NSPACEL : NSPACE));
7079 *flagp |= HASWIDTH|SIMPLE;
7080 goto finish_meta_pat;
7082 ret = reg_node(pRExC_state, DIGIT);
7083 *flagp |= HASWIDTH|SIMPLE;
7084 goto finish_meta_pat;
7086 ret = reg_node(pRExC_state, NDIGIT);
7087 *flagp |= HASWIDTH|SIMPLE;
7088 goto finish_meta_pat;
7090 ret = reg_node(pRExC_state, LNBREAK);
7091 *flagp |= HASWIDTH|SIMPLE;
7092 goto finish_meta_pat;
7094 ret = reg_node(pRExC_state, HORIZWS);
7095 *flagp |= HASWIDTH|SIMPLE;
7096 goto finish_meta_pat;
7098 ret = reg_node(pRExC_state, NHORIZWS);
7099 *flagp |= HASWIDTH|SIMPLE;
7100 goto finish_meta_pat;
7102 ret = reg_node(pRExC_state, VERTWS);
7103 *flagp |= HASWIDTH|SIMPLE;
7104 goto finish_meta_pat;
7106 ret = reg_node(pRExC_state, NVERTWS);
7107 *flagp |= HASWIDTH|SIMPLE;
7109 nextchar(pRExC_state);
7110 Set_Node_Length(ret, 2); /* MJD */
7115 char* const oldregxend = RExC_end;
7117 char* parse_start = RExC_parse - 2;
7120 if (RExC_parse[1] == '{') {
7121 /* a lovely hack--pretend we saw [\pX] instead */
7122 RExC_end = strchr(RExC_parse, '}');
7124 const U8 c = (U8)*RExC_parse;
7126 RExC_end = oldregxend;
7127 vFAIL2("Missing right brace on \\%c{}", c);
7132 RExC_end = RExC_parse + 2;
7133 if (RExC_end > oldregxend)
7134 RExC_end = oldregxend;
7138 ret = regclass(pRExC_state,depth+1);
7140 RExC_end = oldregxend;
7143 Set_Node_Offset(ret, parse_start + 2);
7144 Set_Node_Cur_Length(ret);
7145 nextchar(pRExC_state);
7146 *flagp |= HASWIDTH|SIMPLE;
7150 /* Handle \N{NAME} here and not below because it can be
7151 multicharacter. join_exact() will join them up later on.
7152 Also this makes sure that things like /\N{BLAH}+/ and
7153 \N{BLAH} being multi char Just Happen. dmq*/
7155 ret= reg_namedseq(pRExC_state, NULL);
7157 case 'k': /* Handle \k<NAME> and \k'NAME' */
7160 char ch= RExC_parse[1];
7161 if (ch != '<' && ch != '\'' && ch != '{') {
7163 vFAIL2("Sequence %.2s... not terminated",parse_start);
7165 /* this pretty much dupes the code for (?P=...) in reg(), if
7166 you change this make sure you change that */
7167 char* name_start = (RExC_parse += 2);
7169 SV *sv_dat = reg_scan_name(pRExC_state,
7170 SIZE_ONLY ? REG_RSN_RETURN_NULL : REG_RSN_RETURN_DATA);
7171 ch= (ch == '<') ? '>' : (ch == '{') ? '}' : '\'';
7172 if (RExC_parse == name_start || *RExC_parse != ch)
7173 vFAIL2("Sequence %.3s... not terminated",parse_start);
7176 num = add_data( pRExC_state, 1, "S" );
7177 RExC_rxi->data->data[num]=(void*)sv_dat;
7178 SvREFCNT_inc_simple_void(sv_dat);
7182 ret = reganode(pRExC_state,
7183 (U8)(FOLD ? (LOC ? NREFFL : NREFF) : NREF),
7187 /* override incorrect value set in reganode MJD */
7188 Set_Node_Offset(ret, parse_start+1);
7189 Set_Node_Cur_Length(ret); /* MJD */
7190 nextchar(pRExC_state);
7196 case '1': case '2': case '3': case '4':
7197 case '5': case '6': case '7': case '8': case '9':
7200 bool isg = *RExC_parse == 'g';
7205 if (*RExC_parse == '{') {
7209 if (*RExC_parse == '-') {
7213 if (hasbrace && !isDIGIT(*RExC_parse)) {
7214 if (isrel) RExC_parse--;
7216 goto parse_named_seq;
7218 num = atoi(RExC_parse);
7219 if (isg && num == 0)
7220 vFAIL("Reference to invalid group 0");
7222 num = RExC_npar - num;
7224 vFAIL("Reference to nonexistent or unclosed group");
7226 if (!isg && num > 9 && num >= RExC_npar)
7229 char * const parse_start = RExC_parse - 1; /* MJD */
7230 while (isDIGIT(*RExC_parse))
7232 if (parse_start == RExC_parse - 1)
7233 vFAIL("Unterminated \\g... pattern");
7235 if (*RExC_parse != '}')
7236 vFAIL("Unterminated \\g{...} pattern");
7240 if (num > (I32)RExC_rx->nparens)
7241 vFAIL("Reference to nonexistent group");
7244 ret = reganode(pRExC_state,
7245 (U8)(FOLD ? (LOC ? REFFL : REFF) : REF),
7249 /* override incorrect value set in reganode MJD */
7250 Set_Node_Offset(ret, parse_start+1);
7251 Set_Node_Cur_Length(ret); /* MJD */
7253 nextchar(pRExC_state);
7258 if (RExC_parse >= RExC_end)
7259 FAIL("Trailing \\");
7262 /* Do not generate "unrecognized" warnings here, we fall
7263 back into the quick-grab loop below */
7270 if (RExC_flags & RXf_PMf_EXTENDED) {
7271 if ( reg_skipcomment( pRExC_state ) )
7278 register STRLEN len;
7283 U8 tmpbuf[UTF8_MAXBYTES_CASE+1], *foldbuf;
7285 parse_start = RExC_parse - 1;
7291 ret = reg_node(pRExC_state,
7292 (U8)(FOLD ? (LOC ? EXACTFL : EXACTF) : EXACT));
7294 for (len = 0, p = RExC_parse - 1;
7295 len < 127 && p < RExC_end;
7298 char * const oldp = p;
7300 if (RExC_flags & RXf_PMf_EXTENDED)
7301 p = regwhite( pRExC_state, p );
7306 if (LOC || !FOLD || !is_TRICKYFOLD_safe(p,RExC_end,UTF))
7307 goto normal_default;
7317 /* Literal Escapes Switch
7319 This switch is meant to handle escape sequences that
7320 resolve to a literal character.
7322 Every escape sequence that represents something
7323 else, like an assertion or a char class, is handled
7324 in the switch marked 'Special Escapes' above in this
7325 routine, but also has an entry here as anything that
7326 isn't explicitly mentioned here will be treated as
7327 an unescaped equivalent literal.
7331 /* These are all the special escapes. */
7335 if (LOC || !FOLD || !is_TRICKYFOLD_safe(p,RExC_end,UTF))
7336 goto normal_default;
7337 case 'A': /* Start assertion */
7338 case 'b': case 'B': /* Word-boundary assertion*/
7339 case 'C': /* Single char !DANGEROUS! */
7340 case 'd': case 'D': /* digit class */
7341 case 'g': case 'G': /* generic-backref, pos assertion */
7342 case 'h': case 'H': /* HORIZWS */
7343 case 'k': case 'K': /* named backref, keep marker */
7344 case 'N': /* named char sequence */
7345 case 'p': case 'P': /* Unicode property */
7346 case 'R': /* LNBREAK */
7347 case 's': case 'S': /* space class */
7348 case 'v': case 'V': /* VERTWS */
7349 case 'w': case 'W': /* word class */
7350 case 'X': /* eXtended Unicode "combining character sequence" */
7351 case 'z': case 'Z': /* End of line/string assertion */
7355 /* Anything after here is an escape that resolves to a
7356 literal. (Except digits, which may or may not)
7375 ender = ASCII_TO_NATIVE('\033');
7379 ender = ASCII_TO_NATIVE('\007');
7384 char* const e = strchr(p, '}');
7388 vFAIL("Missing right brace on \\x{}");
7391 I32 flags = PERL_SCAN_ALLOW_UNDERSCORES
7392 | PERL_SCAN_DISALLOW_PREFIX;
7393 STRLEN numlen = e - p - 1;
7394 ender = grok_hex(p + 1, &numlen, &flags, NULL);
7401 I32 flags = PERL_SCAN_DISALLOW_PREFIX;
7403 ender = grok_hex(p, &numlen, &flags, NULL);
7406 if (PL_encoding && ender < 0x100)
7407 goto recode_encoding;
7411 ender = UCHARAT(p++);
7412 ender = toCTRL(ender);
7414 case '0': case '1': case '2': case '3':case '4':
7415 case '5': case '6': case '7': case '8':case '9':
7417 (isDIGIT(p[1]) && atoi(p) >= RExC_npar) ) {
7420 ender = grok_oct(p, &numlen, &flags, NULL);
7427 if (PL_encoding && ender < 0x100)
7428 goto recode_encoding;
7432 SV* enc = PL_encoding;
7433 ender = reg_recode((const char)(U8)ender, &enc);
7434 if (!enc && SIZE_ONLY && ckWARN(WARN_REGEXP))
7435 vWARN(p, "Invalid escape in the specified encoding");
7441 FAIL("Trailing \\");
7444 if (!SIZE_ONLY&& isALPHA(*p) && ckWARN(WARN_REGEXP))
7445 vWARN2(p + 1, "Unrecognized escape \\%c passed through", UCHARAT(p));
7446 goto normal_default;
7451 if (UTF8_IS_START(*p) && UTF) {
7453 ender = utf8n_to_uvchr((U8*)p, RExC_end - p,
7454 &numlen, UTF8_ALLOW_DEFAULT);
7461 if ( RExC_flags & RXf_PMf_EXTENDED)
7462 p = regwhite( pRExC_state, p );
7464 /* Prime the casefolded buffer. */
7465 ender = toFOLD_uni(ender, tmpbuf, &foldlen);
7467 if (p < RExC_end && ISMULT2(p)) { /* Back off on ?+*. */
7472 /* Emit all the Unicode characters. */
7474 for (foldbuf = tmpbuf;
7476 foldlen -= numlen) {
7477 ender = utf8_to_uvchr(foldbuf, &numlen);
7479 const STRLEN unilen = reguni(pRExC_state, ender, s);
7482 /* In EBCDIC the numlen
7483 * and unilen can differ. */
7485 if (numlen >= foldlen)
7489 break; /* "Can't happen." */
7493 const STRLEN unilen = reguni(pRExC_state, ender, s);
7502 REGC((char)ender, s++);
7508 /* Emit all the Unicode characters. */
7510 for (foldbuf = tmpbuf;
7512 foldlen -= numlen) {
7513 ender = utf8_to_uvchr(foldbuf, &numlen);
7515 const STRLEN unilen = reguni(pRExC_state, ender, s);
7518 /* In EBCDIC the numlen
7519 * and unilen can differ. */
7521 if (numlen >= foldlen)
7529 const STRLEN unilen = reguni(pRExC_state, ender, s);
7538 REGC((char)ender, s++);
7542 Set_Node_Cur_Length(ret); /* MJD */
7543 nextchar(pRExC_state);
7545 /* len is STRLEN which is unsigned, need to copy to signed */
7548 vFAIL("Internal disaster");
7552 if (len == 1 && UNI_IS_INVARIANT(ender))
7556 RExC_size += STR_SZ(len);
7559 RExC_emit += STR_SZ(len);
7569 S_regwhite( RExC_state_t *pRExC_state, char *p )
7571 const char *e = RExC_end;
7573 PERL_ARGS_ASSERT_REGWHITE;
7578 else if (*p == '#') {
7587 RExC_seen |= REG_SEEN_RUN_ON_COMMENT;
7595 /* Parse POSIX character classes: [[:foo:]], [[=foo=]], [[.foo.]].
7596 Character classes ([:foo:]) can also be negated ([:^foo:]).
7597 Returns a named class id (ANYOF_XXX) if successful, -1 otherwise.
7598 Equivalence classes ([=foo=]) and composites ([.foo.]) are parsed,
7599 but trigger failures because they are currently unimplemented. */
7601 #define POSIXCC_DONE(c) ((c) == ':')
7602 #define POSIXCC_NOTYET(c) ((c) == '=' || (c) == '.')
7603 #define POSIXCC(c) (POSIXCC_DONE(c) || POSIXCC_NOTYET(c))
7606 S_regpposixcc(pTHX_ RExC_state_t *pRExC_state, I32 value)
7609 I32 namedclass = OOB_NAMEDCLASS;
7611 PERL_ARGS_ASSERT_REGPPOSIXCC;
7613 if (value == '[' && RExC_parse + 1 < RExC_end &&
7614 /* I smell either [: or [= or [. -- POSIX has been here, right? */
7615 POSIXCC(UCHARAT(RExC_parse))) {
7616 const char c = UCHARAT(RExC_parse);
7617 char* const s = RExC_parse++;
7619 while (RExC_parse < RExC_end && UCHARAT(RExC_parse) != c)
7621 if (RExC_parse == RExC_end)
7622 /* Grandfather lone [:, [=, [. */
7625 const char* const t = RExC_parse++; /* skip over the c */
7628 if (UCHARAT(RExC_parse) == ']') {
7629 const char *posixcc = s + 1;
7630 RExC_parse++; /* skip over the ending ] */
7633 const I32 complement = *posixcc == '^' ? *posixcc++ : 0;
7634 const I32 skip = t - posixcc;
7636 /* Initially switch on the length of the name. */
7639 if (memEQ(posixcc, "word", 4)) /* this is not POSIX, this is the Perl \w */
7640 namedclass = complement ? ANYOF_NALNUM : ANYOF_ALNUM;
7643 /* Names all of length 5. */
7644 /* alnum alpha ascii blank cntrl digit graph lower
7645 print punct space upper */
7646 /* Offset 4 gives the best switch position. */
7647 switch (posixcc[4]) {
7649 if (memEQ(posixcc, "alph", 4)) /* alpha */
7650 namedclass = complement ? ANYOF_NALPHA : ANYOF_ALPHA;
7653 if (memEQ(posixcc, "spac", 4)) /* space */
7654 namedclass = complement ? ANYOF_NPSXSPC : ANYOF_PSXSPC;
7657 if (memEQ(posixcc, "grap", 4)) /* graph */
7658 namedclass = complement ? ANYOF_NGRAPH : ANYOF_GRAPH;
7661 if (memEQ(posixcc, "asci", 4)) /* ascii */
7662 namedclass = complement ? ANYOF_NASCII : ANYOF_ASCII;
7665 if (memEQ(posixcc, "blan", 4)) /* blank */
7666 namedclass = complement ? ANYOF_NBLANK : ANYOF_BLANK;
7669 if (memEQ(posixcc, "cntr", 4)) /* cntrl */
7670 namedclass = complement ? ANYOF_NCNTRL : ANYOF_CNTRL;
7673 if (memEQ(posixcc, "alnu", 4)) /* alnum */
7674 namedclass = complement ? ANYOF_NALNUMC : ANYOF_ALNUMC;
7677 if (memEQ(posixcc, "lowe", 4)) /* lower */
7678 namedclass = complement ? ANYOF_NLOWER : ANYOF_LOWER;
7679 else if (memEQ(posixcc, "uppe", 4)) /* upper */
7680 namedclass = complement ? ANYOF_NUPPER : ANYOF_UPPER;
7683 if (memEQ(posixcc, "digi", 4)) /* digit */
7684 namedclass = complement ? ANYOF_NDIGIT : ANYOF_DIGIT;
7685 else if (memEQ(posixcc, "prin", 4)) /* print */
7686 namedclass = complement ? ANYOF_NPRINT : ANYOF_PRINT;
7687 else if (memEQ(posixcc, "punc", 4)) /* punct */
7688 namedclass = complement ? ANYOF_NPUNCT : ANYOF_PUNCT;
7693 if (memEQ(posixcc, "xdigit", 6))
7694 namedclass = complement ? ANYOF_NXDIGIT : ANYOF_XDIGIT;
7698 if (namedclass == OOB_NAMEDCLASS)
7699 Simple_vFAIL3("POSIX class [:%.*s:] unknown",
7701 assert (posixcc[skip] == ':');
7702 assert (posixcc[skip+1] == ']');
7703 } else if (!SIZE_ONLY) {
7704 /* [[=foo=]] and [[.foo.]] are still future. */
7706 /* adjust RExC_parse so the warning shows after
7708 while (UCHARAT(RExC_parse) && UCHARAT(RExC_parse) != ']')
7710 Simple_vFAIL3("POSIX syntax [%c %c] is reserved for future extensions", c, c);
7713 /* Maternal grandfather:
7714 * "[:" ending in ":" but not in ":]" */
7724 S_checkposixcc(pTHX_ RExC_state_t *pRExC_state)
7728 PERL_ARGS_ASSERT_CHECKPOSIXCC;
7730 if (POSIXCC(UCHARAT(RExC_parse))) {
7731 const char *s = RExC_parse;
7732 const char c = *s++;
7736 if (*s && c == *s && s[1] == ']') {
7737 if (ckWARN(WARN_REGEXP))
7739 "POSIX syntax [%c %c] belongs inside character classes",
7742 /* [[=foo=]] and [[.foo.]] are still future. */
7743 if (POSIXCC_NOTYET(c)) {
7744 /* adjust RExC_parse so the error shows after
7746 while (UCHARAT(RExC_parse) && UCHARAT(RExC_parse++) != ']')
7748 Simple_vFAIL3("POSIX syntax [%c %c] is reserved for future extensions", c, c);
7755 #define _C_C_T_(NAME,TEST,WORD) \
7758 ANYOF_CLASS_SET(ret, ANYOF_##NAME); \
7760 for (value = 0; value < 256; value++) \
7762 ANYOF_BITMAP_SET(ret, value); \
7767 case ANYOF_N##NAME: \
7769 ANYOF_CLASS_SET(ret, ANYOF_N##NAME); \
7771 for (value = 0; value < 256; value++) \
7773 ANYOF_BITMAP_SET(ret, value); \
7779 #define _C_C_T_NOLOC_(NAME,TEST,WORD) \
7781 for (value = 0; value < 256; value++) \
7783 ANYOF_BITMAP_SET(ret, value); \
7787 case ANYOF_N##NAME: \
7788 for (value = 0; value < 256; value++) \
7790 ANYOF_BITMAP_SET(ret, value); \
7796 parse a class specification and produce either an ANYOF node that
7797 matches the pattern or if the pattern matches a single char only and
7798 that char is < 256 and we are case insensitive then we produce an
7803 S_regclass(pTHX_ RExC_state_t *pRExC_state, U32 depth)
7806 register UV nextvalue;
7807 register IV prevvalue = OOB_UNICODE;
7808 register IV range = 0;
7809 UV value = 0; /* XXX:dmq: needs to be referenceable (unfortunately) */
7810 register regnode *ret;
7813 char *rangebegin = NULL;
7814 bool need_class = 0;
7817 bool optimize_invert = TRUE;
7818 AV* unicode_alternate = NULL;
7820 UV literal_endpoint = 0;
7822 UV stored = 0; /* number of chars stored in the class */
7824 regnode * const orig_emit = RExC_emit; /* Save the original RExC_emit in
7825 case we need to change the emitted regop to an EXACT. */
7826 const char * orig_parse = RExC_parse;
7827 GET_RE_DEBUG_FLAGS_DECL;
7829 PERL_ARGS_ASSERT_REGCLASS;
7831 PERL_UNUSED_ARG(depth);
7834 DEBUG_PARSE("clas");
7836 /* Assume we are going to generate an ANYOF node. */
7837 ret = reganode(pRExC_state, ANYOF, 0);
7840 ANYOF_FLAGS(ret) = 0;
7842 if (UCHARAT(RExC_parse) == '^') { /* Complement of range. */
7846 ANYOF_FLAGS(ret) |= ANYOF_INVERT;
7850 RExC_size += ANYOF_SKIP;
7851 listsv = &PL_sv_undef; /* For code scanners: listsv always non-NULL. */
7854 RExC_emit += ANYOF_SKIP;
7856 ANYOF_FLAGS(ret) |= ANYOF_FOLD;
7858 ANYOF_FLAGS(ret) |= ANYOF_LOCALE;
7859 ANYOF_BITMAP_ZERO(ret);
7860 listsv = newSVpvs("# comment\n");
7863 nextvalue = RExC_parse < RExC_end ? UCHARAT(RExC_parse) : 0;
7865 if (!SIZE_ONLY && POSIXCC(nextvalue))
7866 checkposixcc(pRExC_state);
7868 /* allow 1st char to be ] (allowing it to be - is dealt with later) */
7869 if (UCHARAT(RExC_parse) == ']')
7873 while (RExC_parse < RExC_end && UCHARAT(RExC_parse) != ']') {
7877 namedclass = OOB_NAMEDCLASS; /* initialize as illegal */
7880 rangebegin = RExC_parse;
7882 value = utf8n_to_uvchr((U8*)RExC_parse,
7883 RExC_end - RExC_parse,
7884 &numlen, UTF8_ALLOW_DEFAULT);
7885 RExC_parse += numlen;
7888 value = UCHARAT(RExC_parse++);
7890 nextvalue = RExC_parse < RExC_end ? UCHARAT(RExC_parse) : 0;
7891 if (value == '[' && POSIXCC(nextvalue))
7892 namedclass = regpposixcc(pRExC_state, value);
7893 else if (value == '\\') {
7895 value = utf8n_to_uvchr((U8*)RExC_parse,
7896 RExC_end - RExC_parse,
7897 &numlen, UTF8_ALLOW_DEFAULT);
7898 RExC_parse += numlen;
7901 value = UCHARAT(RExC_parse++);
7902 /* Some compilers cannot handle switching on 64-bit integer
7903 * values, therefore value cannot be an UV. Yes, this will
7904 * be a problem later if we want switch on Unicode.
7905 * A similar issue a little bit later when switching on
7906 * namedclass. --jhi */
7907 switch ((I32)value) {
7908 case 'w': namedclass = ANYOF_ALNUM; break;
7909 case 'W': namedclass = ANYOF_NALNUM; break;
7910 case 's': namedclass = ANYOF_SPACE; break;
7911 case 'S': namedclass = ANYOF_NSPACE; break;
7912 case 'd': namedclass = ANYOF_DIGIT; break;
7913 case 'D': namedclass = ANYOF_NDIGIT; break;
7914 case 'v': namedclass = ANYOF_VERTWS; break;
7915 case 'V': namedclass = ANYOF_NVERTWS; break;
7916 case 'h': namedclass = ANYOF_HORIZWS; break;
7917 case 'H': namedclass = ANYOF_NHORIZWS; break;
7918 case 'N': /* Handle \N{NAME} in class */
7920 /* We only pay attention to the first char of
7921 multichar strings being returned. I kinda wonder
7922 if this makes sense as it does change the behaviour
7923 from earlier versions, OTOH that behaviour was broken
7925 UV v; /* value is register so we cant & it /grrr */
7926 if (reg_namedseq(pRExC_state, &v)) {
7936 if (RExC_parse >= RExC_end)
7937 vFAIL2("Empty \\%c{}", (U8)value);
7938 if (*RExC_parse == '{') {
7939 const U8 c = (U8)value;
7940 e = strchr(RExC_parse++, '}');
7942 vFAIL2("Missing right brace on \\%c{}", c);
7943 while (isSPACE(UCHARAT(RExC_parse)))
7945 if (e == RExC_parse)
7946 vFAIL2("Empty \\%c{}", c);
7948 while (isSPACE(UCHARAT(RExC_parse + n - 1)))
7956 if (UCHARAT(RExC_parse) == '^') {
7959 value = value == 'p' ? 'P' : 'p'; /* toggle */
7960 while (isSPACE(UCHARAT(RExC_parse))) {
7965 Perl_sv_catpvf(aTHX_ listsv, "%cutf8::%.*s\n",
7966 (value=='p' ? '+' : '!'), (int)n, RExC_parse);
7969 ANYOF_FLAGS(ret) |= ANYOF_UNICODE;
7970 namedclass = ANYOF_MAX; /* no official name, but it's named */
7973 case 'n': value = '\n'; break;
7974 case 'r': value = '\r'; break;
7975 case 't': value = '\t'; break;
7976 case 'f': value = '\f'; break;
7977 case 'b': value = '\b'; break;
7978 case 'e': value = ASCII_TO_NATIVE('\033');break;
7979 case 'a': value = ASCII_TO_NATIVE('\007');break;
7981 if (*RExC_parse == '{') {
7982 I32 flags = PERL_SCAN_ALLOW_UNDERSCORES
7983 | PERL_SCAN_DISALLOW_PREFIX;
7984 char * const e = strchr(RExC_parse++, '}');
7986 vFAIL("Missing right brace on \\x{}");
7988 numlen = e - RExC_parse;
7989 value = grok_hex(RExC_parse, &numlen, &flags, NULL);
7993 I32 flags = PERL_SCAN_DISALLOW_PREFIX;
7995 value = grok_hex(RExC_parse, &numlen, &flags, NULL);
7996 RExC_parse += numlen;
7998 if (PL_encoding && value < 0x100)
7999 goto recode_encoding;
8002 value = UCHARAT(RExC_parse++);
8003 value = toCTRL(value);
8005 case '0': case '1': case '2': case '3': case '4':
8006 case '5': case '6': case '7': case '8': case '9':
8010 value = grok_oct(--RExC_parse, &numlen, &flags, NULL);
8011 RExC_parse += numlen;
8012 if (PL_encoding && value < 0x100)
8013 goto recode_encoding;
8018 SV* enc = PL_encoding;
8019 value = reg_recode((const char)(U8)value, &enc);
8020 if (!enc && SIZE_ONLY && ckWARN(WARN_REGEXP))
8022 "Invalid escape in the specified encoding");
8026 if (!SIZE_ONLY && isALPHA(value) && ckWARN(WARN_REGEXP))
8028 "Unrecognized escape \\%c in character class passed through",
8032 } /* end of \blah */
8038 if (namedclass > OOB_NAMEDCLASS) { /* this is a named class \blah */
8040 if (!SIZE_ONLY && !need_class)
8041 ANYOF_CLASS_ZERO(ret);
8045 /* a bad range like a-\d, a-[:digit:] ? */
8048 if (ckWARN(WARN_REGEXP)) {
8050 RExC_parse >= rangebegin ?
8051 RExC_parse - rangebegin : 0;
8053 "False [] range \"%*.*s\"",
8056 if (prevvalue < 256) {
8057 ANYOF_BITMAP_SET(ret, prevvalue);
8058 ANYOF_BITMAP_SET(ret, '-');
8061 ANYOF_FLAGS(ret) |= ANYOF_UNICODE;
8062 Perl_sv_catpvf(aTHX_ listsv,
8063 "%04"UVxf"\n%04"UVxf"\n", (UV)prevvalue, (UV) '-');
8067 range = 0; /* this was not a true range */
8073 const char *what = NULL;
8076 if (namedclass > OOB_NAMEDCLASS)
8077 optimize_invert = FALSE;
8078 /* Possible truncation here but in some 64-bit environments
8079 * the compiler gets heartburn about switch on 64-bit values.
8080 * A similar issue a little earlier when switching on value.
8082 switch ((I32)namedclass) {
8083 case _C_C_T_(ALNUM, isALNUM(value), "Word");
8084 case _C_C_T_(ALNUMC, isALNUMC(value), "Alnum");
8085 case _C_C_T_(ALPHA, isALPHA(value), "Alpha");
8086 case _C_C_T_(BLANK, isBLANK(value), "Blank");
8087 case _C_C_T_(CNTRL, isCNTRL(value), "Cntrl");
8088 case _C_C_T_(GRAPH, isGRAPH(value), "Graph");
8089 case _C_C_T_(LOWER, isLOWER(value), "Lower");
8090 case _C_C_T_(PRINT, isPRINT(value), "Print");
8091 case _C_C_T_(PSXSPC, isPSXSPC(value), "Space");
8092 case _C_C_T_(PUNCT, isPUNCT(value), "Punct");
8093 case _C_C_T_(SPACE, isSPACE(value), "SpacePerl");
8094 case _C_C_T_(UPPER, isUPPER(value), "Upper");
8095 case _C_C_T_(XDIGIT, isXDIGIT(value), "XDigit");
8096 case _C_C_T_NOLOC_(VERTWS, is_VERTWS_latin1(&value), "VertSpace");
8097 case _C_C_T_NOLOC_(HORIZWS, is_HORIZWS_latin1(&value), "HorizSpace");
8100 ANYOF_CLASS_SET(ret, ANYOF_ASCII);
8103 for (value = 0; value < 128; value++)
8104 ANYOF_BITMAP_SET(ret, value);
8106 for (value = 0; value < 256; value++) {
8108 ANYOF_BITMAP_SET(ret, value);
8117 ANYOF_CLASS_SET(ret, ANYOF_NASCII);
8120 for (value = 128; value < 256; value++)
8121 ANYOF_BITMAP_SET(ret, value);
8123 for (value = 0; value < 256; value++) {
8124 if (!isASCII(value))
8125 ANYOF_BITMAP_SET(ret, value);
8134 ANYOF_CLASS_SET(ret, ANYOF_DIGIT);
8136 /* consecutive digits assumed */
8137 for (value = '0'; value <= '9'; value++)
8138 ANYOF_BITMAP_SET(ret, value);
8145 ANYOF_CLASS_SET(ret, ANYOF_NDIGIT);
8147 /* consecutive digits assumed */
8148 for (value = 0; value < '0'; value++)
8149 ANYOF_BITMAP_SET(ret, value);
8150 for (value = '9' + 1; value < 256; value++)
8151 ANYOF_BITMAP_SET(ret, value);
8157 /* this is to handle \p and \P */
8160 vFAIL("Invalid [::] class");
8164 /* Strings such as "+utf8::isWord\n" */
8165 Perl_sv_catpvf(aTHX_ listsv, "%cutf8::Is%s\n", yesno, what);
8168 ANYOF_FLAGS(ret) |= ANYOF_CLASS;
8171 } /* end of namedclass \blah */
8174 if (prevvalue > (IV)value) /* b-a */ {
8175 const int w = RExC_parse - rangebegin;
8176 Simple_vFAIL4("Invalid [] range \"%*.*s\"", w, w, rangebegin);
8177 range = 0; /* not a valid range */
8181 prevvalue = value; /* save the beginning of the range */
8182 if (*RExC_parse == '-' && RExC_parse+1 < RExC_end &&
8183 RExC_parse[1] != ']') {
8186 /* a bad range like \w-, [:word:]- ? */
8187 if (namedclass > OOB_NAMEDCLASS) {
8188 if (ckWARN(WARN_REGEXP)) {
8190 RExC_parse >= rangebegin ?
8191 RExC_parse - rangebegin : 0;
8193 "False [] range \"%*.*s\"",
8197 ANYOF_BITMAP_SET(ret, '-');
8199 range = 1; /* yeah, it's a range! */
8200 continue; /* but do it the next time */
8204 /* now is the next time */
8205 /*stored += (value - prevvalue + 1);*/
8207 if (prevvalue < 256) {
8208 const IV ceilvalue = value < 256 ? value : 255;
8211 /* In EBCDIC [\x89-\x91] should include
8212 * the \x8e but [i-j] should not. */
8213 if (literal_endpoint == 2 &&
8214 ((isLOWER(prevvalue) && isLOWER(ceilvalue)) ||
8215 (isUPPER(prevvalue) && isUPPER(ceilvalue))))
8217 if (isLOWER(prevvalue)) {
8218 for (i = prevvalue; i <= ceilvalue; i++)
8219 if (isLOWER(i) && !ANYOF_BITMAP_TEST(ret,i)) {
8221 ANYOF_BITMAP_SET(ret, i);
8224 for (i = prevvalue; i <= ceilvalue; i++)
8225 if (isUPPER(i) && !ANYOF_BITMAP_TEST(ret,i)) {
8227 ANYOF_BITMAP_SET(ret, i);
8233 for (i = prevvalue; i <= ceilvalue; i++) {
8234 if (!ANYOF_BITMAP_TEST(ret,i)) {
8236 ANYOF_BITMAP_SET(ret, i);
8240 if (value > 255 || UTF) {
8241 const UV prevnatvalue = NATIVE_TO_UNI(prevvalue);
8242 const UV natvalue = NATIVE_TO_UNI(value);
8243 stored+=2; /* can't optimize this class */
8244 ANYOF_FLAGS(ret) |= ANYOF_UNICODE;
8245 if (prevnatvalue < natvalue) { /* what about > ? */
8246 Perl_sv_catpvf(aTHX_ listsv, "%04"UVxf"\t%04"UVxf"\n",
8247 prevnatvalue, natvalue);
8249 else if (prevnatvalue == natvalue) {
8250 Perl_sv_catpvf(aTHX_ listsv, "%04"UVxf"\n", natvalue);
8252 U8 foldbuf[UTF8_MAXBYTES_CASE+1];
8254 const UV f = to_uni_fold(natvalue, foldbuf, &foldlen);
8256 #ifdef EBCDIC /* RD t/uni/fold ff and 6b */
8257 if (RExC_precomp[0] == ':' &&
8258 RExC_precomp[1] == '[' &&
8259 (f == 0xDF || f == 0x92)) {
8260 f = NATIVE_TO_UNI(f);
8263 /* If folding and foldable and a single
8264 * character, insert also the folded version
8265 * to the charclass. */
8267 #ifdef EBCDIC /* RD tunifold ligatures s,t fb05, fb06 */
8268 if ((RExC_precomp[0] == ':' &&
8269 RExC_precomp[1] == '[' &&
8271 (value == 0xFB05 || value == 0xFB06))) ?
8272 foldlen == ((STRLEN)UNISKIP(f) - 1) :
8273 foldlen == (STRLEN)UNISKIP(f) )
8275 if (foldlen == (STRLEN)UNISKIP(f))
8277 Perl_sv_catpvf(aTHX_ listsv,
8280 /* Any multicharacter foldings
8281 * require the following transform:
8282 * [ABCDEF] -> (?:[ABCabcDEFd]|pq|rst)
8283 * where E folds into "pq" and F folds
8284 * into "rst", all other characters
8285 * fold to single characters. We save
8286 * away these multicharacter foldings,
8287 * to be later saved as part of the
8288 * additional "s" data. */
8291 if (!unicode_alternate)
8292 unicode_alternate = newAV();
8293 sv = newSVpvn_utf8((char*)foldbuf, foldlen,
8295 av_push(unicode_alternate, sv);
8299 /* If folding and the value is one of the Greek
8300 * sigmas insert a few more sigmas to make the
8301 * folding rules of the sigmas to work right.
8302 * Note that not all the possible combinations
8303 * are handled here: some of them are handled
8304 * by the standard folding rules, and some of
8305 * them (literal or EXACTF cases) are handled
8306 * during runtime in regexec.c:S_find_byclass(). */
8307 if (value == UNICODE_GREEK_SMALL_LETTER_FINAL_SIGMA) {
8308 Perl_sv_catpvf(aTHX_ listsv, "%04"UVxf"\n",
8309 (UV)UNICODE_GREEK_CAPITAL_LETTER_SIGMA);
8310 Perl_sv_catpvf(aTHX_ listsv, "%04"UVxf"\n",
8311 (UV)UNICODE_GREEK_SMALL_LETTER_SIGMA);
8313 else if (value == UNICODE_GREEK_CAPITAL_LETTER_SIGMA)
8314 Perl_sv_catpvf(aTHX_ listsv, "%04"UVxf"\n",
8315 (UV)UNICODE_GREEK_SMALL_LETTER_SIGMA);
8320 literal_endpoint = 0;
8324 range = 0; /* this range (if it was one) is done now */
8328 ANYOF_FLAGS(ret) |= ANYOF_LARGE;
8330 RExC_size += ANYOF_CLASS_ADD_SKIP;
8332 RExC_emit += ANYOF_CLASS_ADD_SKIP;
8338 /****** !SIZE_ONLY AFTER HERE *********/
8340 if( stored == 1 && (value < 128 || (value < 256 && !UTF))
8341 && !( ANYOF_FLAGS(ret) & ( ANYOF_FLAGS_ALL ^ ANYOF_FOLD ) )
8343 /* optimize single char class to an EXACT node
8344 but *only* when its not a UTF/high char */
8345 const char * cur_parse= RExC_parse;
8346 RExC_emit = (regnode *)orig_emit;
8347 RExC_parse = (char *)orig_parse;
8348 ret = reg_node(pRExC_state,
8349 (U8)((ANYOF_FLAGS(ret) & ANYOF_FOLD) ? EXACTF : EXACT));
8350 RExC_parse = (char *)cur_parse;
8351 *STRING(ret)= (char)value;
8353 RExC_emit += STR_SZ(1);
8355 SvREFCNT_dec(listsv);
8359 /* optimize case-insensitive simple patterns (e.g. /[a-z]/i) */
8360 if ( /* If the only flag is folding (plus possibly inversion). */
8361 ((ANYOF_FLAGS(ret) & (ANYOF_FLAGS_ALL ^ ANYOF_INVERT)) == ANYOF_FOLD)
8363 for (value = 0; value < 256; ++value) {
8364 if (ANYOF_BITMAP_TEST(ret, value)) {
8365 UV fold = PL_fold[value];
8368 ANYOF_BITMAP_SET(ret, fold);
8371 ANYOF_FLAGS(ret) &= ~ANYOF_FOLD;
8374 /* optimize inverted simple patterns (e.g. [^a-z]) */
8375 if (optimize_invert &&
8376 /* If the only flag is inversion. */
8377 (ANYOF_FLAGS(ret) & ANYOF_FLAGS_ALL) == ANYOF_INVERT) {
8378 for (value = 0; value < ANYOF_BITMAP_SIZE; ++value)
8379 ANYOF_BITMAP(ret)[value] ^= ANYOF_FLAGS_ALL;
8380 ANYOF_FLAGS(ret) = ANYOF_UNICODE_ALL;
8383 AV * const av = newAV();
8385 /* The 0th element stores the character class description
8386 * in its textual form: used later (regexec.c:Perl_regclass_swash())
8387 * to initialize the appropriate swash (which gets stored in
8388 * the 1st element), and also useful for dumping the regnode.
8389 * The 2nd element stores the multicharacter foldings,
8390 * used later (regexec.c:S_reginclass()). */
8391 av_store(av, 0, listsv);
8392 av_store(av, 1, NULL);
8393 av_store(av, 2, (SV*)unicode_alternate);
8394 rv = newRV_noinc((SV*)av);
8395 n = add_data(pRExC_state, 1, "s");
8396 RExC_rxi->data->data[n] = (void*)rv;
8404 /* reg_skipcomment()
8406 Absorbs an /x style # comments from the input stream.
8407 Returns true if there is more text remaining in the stream.
8408 Will set the REG_SEEN_RUN_ON_COMMENT flag if the comment
8409 terminates the pattern without including a newline.
8411 Note its the callers responsibility to ensure that we are
8417 S_reg_skipcomment(pTHX_ RExC_state_t *pRExC_state)
8421 PERL_ARGS_ASSERT_REG_SKIPCOMMENT;
8423 while (RExC_parse < RExC_end)
8424 if (*RExC_parse++ == '\n') {
8429 /* we ran off the end of the pattern without ending
8430 the comment, so we have to add an \n when wrapping */
8431 RExC_seen |= REG_SEEN_RUN_ON_COMMENT;
8439 Advance that parse position, and optionall absorbs
8440 "whitespace" from the inputstream.
8442 Without /x "whitespace" means (?#...) style comments only,
8443 with /x this means (?#...) and # comments and whitespace proper.
8445 Returns the RExC_parse point from BEFORE the scan occurs.
8447 This is the /x friendly way of saying RExC_parse++.
8451 S_nextchar(pTHX_ RExC_state_t *pRExC_state)
8453 char* const retval = RExC_parse++;
8455 PERL_ARGS_ASSERT_NEXTCHAR;
8458 if (*RExC_parse == '(' && RExC_parse[1] == '?' &&
8459 RExC_parse[2] == '#') {
8460 while (*RExC_parse != ')') {
8461 if (RExC_parse == RExC_end)
8462 FAIL("Sequence (?#... not terminated");
8468 if (RExC_flags & RXf_PMf_EXTENDED) {
8469 if (isSPACE(*RExC_parse)) {
8473 else if (*RExC_parse == '#') {
8474 if ( reg_skipcomment( pRExC_state ) )
8483 - reg_node - emit a node
8485 STATIC regnode * /* Location. */
8486 S_reg_node(pTHX_ RExC_state_t *pRExC_state, U8 op)
8489 register regnode *ptr;
8490 regnode * const ret = RExC_emit;
8491 GET_RE_DEBUG_FLAGS_DECL;
8493 PERL_ARGS_ASSERT_REG_NODE;
8496 SIZE_ALIGN(RExC_size);
8500 if (RExC_emit >= RExC_emit_bound)
8501 Perl_croak(aTHX_ "panic: reg_node overrun trying to emit %d", op);
8503 NODE_ALIGN_FILL(ret);
8505 FILL_ADVANCE_NODE(ptr, op);
8506 #ifdef RE_TRACK_PATTERN_OFFSETS
8507 if (RExC_offsets) { /* MJD */
8508 MJD_OFFSET_DEBUG(("%s:%d: (op %s) %s %"UVuf" (len %"UVuf") (max %"UVuf").\n",
8509 "reg_node", __LINE__,
8511 (UV)(RExC_emit - RExC_emit_start) > RExC_offsets[0]
8512 ? "Overwriting end of array!\n" : "OK",
8513 (UV)(RExC_emit - RExC_emit_start),
8514 (UV)(RExC_parse - RExC_start),
8515 (UV)RExC_offsets[0]));
8516 Set_Node_Offset(RExC_emit, RExC_parse + (op == END));
8524 - reganode - emit a node with an argument
8526 STATIC regnode * /* Location. */
8527 S_reganode(pTHX_ RExC_state_t *pRExC_state, U8 op, U32 arg)
8530 register regnode *ptr;
8531 regnode * const ret = RExC_emit;
8532 GET_RE_DEBUG_FLAGS_DECL;
8534 PERL_ARGS_ASSERT_REGANODE;
8537 SIZE_ALIGN(RExC_size);
8542 assert(2==regarglen[op]+1);
8544 Anything larger than this has to allocate the extra amount.
8545 If we changed this to be:
8547 RExC_size += (1 + regarglen[op]);
8549 then it wouldn't matter. Its not clear what side effect
8550 might come from that so its not done so far.
8555 if (RExC_emit >= RExC_emit_bound)
8556 Perl_croak(aTHX_ "panic: reg_node overrun trying to emit %d", op);
8558 NODE_ALIGN_FILL(ret);
8560 FILL_ADVANCE_NODE_ARG(ptr, op, arg);
8561 #ifdef RE_TRACK_PATTERN_OFFSETS
8562 if (RExC_offsets) { /* MJD */
8563 MJD_OFFSET_DEBUG(("%s(%d): (op %s) %s %"UVuf" <- %"UVuf" (max %"UVuf").\n",
8567 (UV)(RExC_emit - RExC_emit_start) > RExC_offsets[0] ?
8568 "Overwriting end of array!\n" : "OK",
8569 (UV)(RExC_emit - RExC_emit_start),
8570 (UV)(RExC_parse - RExC_start),
8571 (UV)RExC_offsets[0]));
8572 Set_Cur_Node_Offset;
8580 - reguni - emit (if appropriate) a Unicode character
8583 S_reguni(pTHX_ const RExC_state_t *pRExC_state, UV uv, char* s)
8587 PERL_ARGS_ASSERT_REGUNI;
8589 return SIZE_ONLY ? UNISKIP(uv) : (uvchr_to_utf8((U8*)s, uv) - (U8*)s);
8593 - reginsert - insert an operator in front of already-emitted operand
8595 * Means relocating the operand.
8598 S_reginsert(pTHX_ RExC_state_t *pRExC_state, U8 op, regnode *opnd, U32 depth)
8601 register regnode *src;
8602 register regnode *dst;
8603 register regnode *place;
8604 const int offset = regarglen[(U8)op];
8605 const int size = NODE_STEP_REGNODE + offset;
8606 GET_RE_DEBUG_FLAGS_DECL;
8608 PERL_ARGS_ASSERT_REGINSERT;
8609 PERL_UNUSED_ARG(depth);
8610 /* (PL_regkind[(U8)op] == CURLY ? EXTRA_STEP_2ARGS : 0); */
8611 DEBUG_PARSE_FMT("inst"," - %s",PL_reg_name[op]);
8620 if (RExC_open_parens) {
8622 /*DEBUG_PARSE_FMT("inst"," - %"IVdf, (IV)RExC_npar);*/
8623 for ( paren=0 ; paren < RExC_npar ; paren++ ) {
8624 if ( RExC_open_parens[paren] >= opnd ) {
8625 /*DEBUG_PARSE_FMT("open"," - %d",size);*/
8626 RExC_open_parens[paren] += size;
8628 /*DEBUG_PARSE_FMT("open"," - %s","ok");*/
8630 if ( RExC_close_parens[paren] >= opnd ) {
8631 /*DEBUG_PARSE_FMT("close"," - %d",size);*/
8632 RExC_close_parens[paren] += size;
8634 /*DEBUG_PARSE_FMT("close"," - %s","ok");*/
8639 while (src > opnd) {
8640 StructCopy(--src, --dst, regnode);
8641 #ifdef RE_TRACK_PATTERN_OFFSETS
8642 if (RExC_offsets) { /* MJD 20010112 */
8643 MJD_OFFSET_DEBUG(("%s(%d): (op %s) %s copy %"UVuf" -> %"UVuf" (max %"UVuf").\n",
8647 (UV)(dst - RExC_emit_start) > RExC_offsets[0]
8648 ? "Overwriting end of array!\n" : "OK",
8649 (UV)(src - RExC_emit_start),
8650 (UV)(dst - RExC_emit_start),
8651 (UV)RExC_offsets[0]));
8652 Set_Node_Offset_To_R(dst-RExC_emit_start, Node_Offset(src));
8653 Set_Node_Length_To_R(dst-RExC_emit_start, Node_Length(src));
8659 place = opnd; /* Op node, where operand used to be. */
8660 #ifdef RE_TRACK_PATTERN_OFFSETS
8661 if (RExC_offsets) { /* MJD */
8662 MJD_OFFSET_DEBUG(("%s(%d): (op %s) %s %"UVuf" <- %"UVuf" (max %"UVuf").\n",
8666 (UV)(place - RExC_emit_start) > RExC_offsets[0]
8667 ? "Overwriting end of array!\n" : "OK",
8668 (UV)(place - RExC_emit_start),
8669 (UV)(RExC_parse - RExC_start),
8670 (UV)RExC_offsets[0]));
8671 Set_Node_Offset(place, RExC_parse);
8672 Set_Node_Length(place, 1);
8675 src = NEXTOPER(place);
8676 FILL_ADVANCE_NODE(place, op);
8677 Zero(src, offset, regnode);
8681 - regtail - set the next-pointer at the end of a node chain of p to val.
8682 - SEE ALSO: regtail_study
8684 /* TODO: All three parms should be const */
8686 S_regtail(pTHX_ RExC_state_t *pRExC_state, regnode *p, const regnode *val,U32 depth)
8689 register regnode *scan;
8690 GET_RE_DEBUG_FLAGS_DECL;
8692 PERL_ARGS_ASSERT_REGTAIL;
8694 PERL_UNUSED_ARG(depth);
8700 /* Find last node. */
8703 regnode * const temp = regnext(scan);
8705 SV * const mysv=sv_newmortal();
8706 DEBUG_PARSE_MSG((scan==p ? "tail" : ""));
8707 regprop(RExC_rx, mysv, scan);
8708 PerlIO_printf(Perl_debug_log, "~ %s (%d) %s %s\n",
8709 SvPV_nolen_const(mysv), REG_NODE_NUM(scan),
8710 (temp == NULL ? "->" : ""),
8711 (temp == NULL ? PL_reg_name[OP(val)] : "")
8719 if (reg_off_by_arg[OP(scan)]) {
8720 ARG_SET(scan, val - scan);
8723 NEXT_OFF(scan) = val - scan;
8729 - regtail_study - set the next-pointer at the end of a node chain of p to val.
8730 - Look for optimizable sequences at the same time.
8731 - currently only looks for EXACT chains.
8733 This is expermental code. The idea is to use this routine to perform
8734 in place optimizations on branches and groups as they are constructed,
8735 with the long term intention of removing optimization from study_chunk so
8736 that it is purely analytical.
8738 Currently only used when in DEBUG mode. The macro REGTAIL_STUDY() is used
8739 to control which is which.
8742 /* TODO: All four parms should be const */
8745 S_regtail_study(pTHX_ RExC_state_t *pRExC_state, regnode *p, const regnode *val,U32 depth)
8748 register regnode *scan;
8750 #ifdef EXPERIMENTAL_INPLACESCAN
8753 GET_RE_DEBUG_FLAGS_DECL;
8755 PERL_ARGS_ASSERT_REGTAIL_STUDY;
8761 /* Find last node. */
8765 regnode * const temp = regnext(scan);
8766 #ifdef EXPERIMENTAL_INPLACESCAN
8767 if (PL_regkind[OP(scan)] == EXACT)
8768 if (join_exact(pRExC_state,scan,&min,1,val,depth+1))
8776 if( exact == PSEUDO )
8778 else if ( exact != OP(scan) )
8787 SV * const mysv=sv_newmortal();
8788 DEBUG_PARSE_MSG((scan==p ? "tsdy" : ""));
8789 regprop(RExC_rx, mysv, scan);
8790 PerlIO_printf(Perl_debug_log, "~ %s (%d) -> %s\n",
8791 SvPV_nolen_const(mysv),
8793 PL_reg_name[exact]);
8800 SV * const mysv_val=sv_newmortal();
8801 DEBUG_PARSE_MSG("");
8802 regprop(RExC_rx, mysv_val, val);
8803 PerlIO_printf(Perl_debug_log, "~ attach to %s (%"IVdf") offset to %"IVdf"\n",
8804 SvPV_nolen_const(mysv_val),
8805 (IV)REG_NODE_NUM(val),
8809 if (reg_off_by_arg[OP(scan)]) {
8810 ARG_SET(scan, val - scan);
8813 NEXT_OFF(scan) = val - scan;
8821 - regcurly - a little FSA that accepts {\d+,?\d*}
8824 S_regcurly(register const char *s)
8826 PERL_ARGS_ASSERT_REGCURLY;
8845 - regdump - dump a regexp onto Perl_debug_log in vaguely comprehensible form
8849 S_regdump_extflags(pTHX_ const char *lead, const U32 flags)
8854 for (bit=0; bit<32; bit++) {
8855 if (flags & (1<<bit)) {
8857 PerlIO_printf(Perl_debug_log, "%s",lead);
8858 PerlIO_printf(Perl_debug_log, "%s ",PL_reg_extflags_name[bit]);
8863 PerlIO_printf(Perl_debug_log, "\n");
8865 PerlIO_printf(Perl_debug_log, "%s[none-set]\n",lead);
8871 Perl_regdump(pTHX_ const regexp *r)
8875 SV * const sv = sv_newmortal();
8876 SV *dsv= sv_newmortal();
8878 GET_RE_DEBUG_FLAGS_DECL;
8880 PERL_ARGS_ASSERT_REGDUMP;
8882 (void)dumpuntil(r, ri->program, ri->program + 1, NULL, NULL, sv, 0, 0);
8884 /* Header fields of interest. */
8885 if (r->anchored_substr) {
8886 RE_PV_QUOTED_DECL(s, 0, dsv, SvPVX_const(r->anchored_substr),
8887 RE_SV_DUMPLEN(r->anchored_substr), 30);
8888 PerlIO_printf(Perl_debug_log,
8889 "anchored %s%s at %"IVdf" ",
8890 s, RE_SV_TAIL(r->anchored_substr),
8891 (IV)r->anchored_offset);
8892 } else if (r->anchored_utf8) {
8893 RE_PV_QUOTED_DECL(s, 1, dsv, SvPVX_const(r->anchored_utf8),
8894 RE_SV_DUMPLEN(r->anchored_utf8), 30);
8895 PerlIO_printf(Perl_debug_log,
8896 "anchored utf8 %s%s at %"IVdf" ",
8897 s, RE_SV_TAIL(r->anchored_utf8),
8898 (IV)r->anchored_offset);
8900 if (r->float_substr) {
8901 RE_PV_QUOTED_DECL(s, 0, dsv, SvPVX_const(r->float_substr),
8902 RE_SV_DUMPLEN(r->float_substr), 30);
8903 PerlIO_printf(Perl_debug_log,
8904 "floating %s%s at %"IVdf"..%"UVuf" ",
8905 s, RE_SV_TAIL(r->float_substr),
8906 (IV)r->float_min_offset, (UV)r->float_max_offset);
8907 } else if (r->float_utf8) {
8908 RE_PV_QUOTED_DECL(s, 1, dsv, SvPVX_const(r->float_utf8),
8909 RE_SV_DUMPLEN(r->float_utf8), 30);
8910 PerlIO_printf(Perl_debug_log,
8911 "floating utf8 %s%s at %"IVdf"..%"UVuf" ",
8912 s, RE_SV_TAIL(r->float_utf8),
8913 (IV)r->float_min_offset, (UV)r->float_max_offset);
8915 if (r->check_substr || r->check_utf8)
8916 PerlIO_printf(Perl_debug_log,
8918 (r->check_substr == r->float_substr
8919 && r->check_utf8 == r->float_utf8
8920 ? "(checking floating" : "(checking anchored"));
8921 if (r->extflags & RXf_NOSCAN)
8922 PerlIO_printf(Perl_debug_log, " noscan");
8923 if (r->extflags & RXf_CHECK_ALL)
8924 PerlIO_printf(Perl_debug_log, " isall");
8925 if (r->check_substr || r->check_utf8)
8926 PerlIO_printf(Perl_debug_log, ") ");
8928 if (ri->regstclass) {
8929 regprop(r, sv, ri->regstclass);
8930 PerlIO_printf(Perl_debug_log, "stclass %s ", SvPVX_const(sv));
8932 if (r->extflags & RXf_ANCH) {
8933 PerlIO_printf(Perl_debug_log, "anchored");
8934 if (r->extflags & RXf_ANCH_BOL)
8935 PerlIO_printf(Perl_debug_log, "(BOL)");
8936 if (r->extflags & RXf_ANCH_MBOL)
8937 PerlIO_printf(Perl_debug_log, "(MBOL)");
8938 if (r->extflags & RXf_ANCH_SBOL)
8939 PerlIO_printf(Perl_debug_log, "(SBOL)");
8940 if (r->extflags & RXf_ANCH_GPOS)
8941 PerlIO_printf(Perl_debug_log, "(GPOS)");
8942 PerlIO_putc(Perl_debug_log, ' ');
8944 if (r->extflags & RXf_GPOS_SEEN)
8945 PerlIO_printf(Perl_debug_log, "GPOS:%"UVuf" ", (UV)r->gofs);
8946 if (r->intflags & PREGf_SKIP)
8947 PerlIO_printf(Perl_debug_log, "plus ");
8948 if (r->intflags & PREGf_IMPLICIT)
8949 PerlIO_printf(Perl_debug_log, "implicit ");
8950 PerlIO_printf(Perl_debug_log, "minlen %"IVdf" ", (IV)r->minlen);
8951 if (r->extflags & RXf_EVAL_SEEN)
8952 PerlIO_printf(Perl_debug_log, "with eval ");
8953 PerlIO_printf(Perl_debug_log, "\n");
8954 DEBUG_FLAGS_r(regdump_extflags("r->extflags: ",r->extflags));
8956 PERL_ARGS_ASSERT_REGDUMP;
8957 PERL_UNUSED_CONTEXT;
8959 #endif /* DEBUGGING */
8963 - regprop - printable representation of opcode
8966 Perl_regprop(pTHX_ const regexp *prog, SV *sv, const regnode *o)
8971 RXi_GET_DECL(prog,progi);
8972 GET_RE_DEBUG_FLAGS_DECL;
8974 PERL_ARGS_ASSERT_REGPROP;
8976 sv_setpvn(sv, "", 0);
8978 if (OP(o) > REGNODE_MAX) /* regnode.type is unsigned */
8979 /* It would be nice to FAIL() here, but this may be called from
8980 regexec.c, and it would be hard to supply pRExC_state. */
8981 Perl_croak(aTHX_ "Corrupted regexp opcode %d > %d", (int)OP(o), (int)REGNODE_MAX);
8982 sv_catpv(sv, PL_reg_name[OP(o)]); /* Take off const! */
8984 k = PL_regkind[OP(o)];
8988 /* Using is_utf8_string() (via PERL_PV_UNI_DETECT)
8989 * is a crude hack but it may be the best for now since
8990 * we have no flag "this EXACTish node was UTF-8"
8992 pv_pretty(sv, STRING(o), STR_LEN(o), 60, PL_colors[0], PL_colors[1],
8993 PERL_PV_ESCAPE_UNI_DETECT |
8994 PERL_PV_PRETTY_ELLIPSES |
8995 PERL_PV_PRETTY_LTGT |
8996 PERL_PV_PRETTY_NOCLEAR
8998 } else if (k == TRIE) {
8999 /* print the details of the trie in dumpuntil instead, as
9000 * progi->data isn't available here */
9001 const char op = OP(o);
9002 const U32 n = ARG(o);
9003 const reg_ac_data * const ac = IS_TRIE_AC(op) ?
9004 (reg_ac_data *)progi->data->data[n] :
9006 const reg_trie_data * const trie
9007 = (reg_trie_data*)progi->data->data[!IS_TRIE_AC(op) ? n : ac->trie];
9009 Perl_sv_catpvf(aTHX_ sv, "-%s",PL_reg_name[o->flags]);
9010 DEBUG_TRIE_COMPILE_r(
9011 Perl_sv_catpvf(aTHX_ sv,
9012 "<S:%"UVuf"/%"IVdf" W:%"UVuf" L:%"UVuf"/%"UVuf" C:%"UVuf"/%"UVuf">",
9013 (UV)trie->startstate,
9014 (IV)trie->statecount-1, /* -1 because of the unused 0 element */
9015 (UV)trie->wordcount,
9018 (UV)TRIE_CHARCOUNT(trie),
9019 (UV)trie->uniquecharcount
9022 if ( IS_ANYOF_TRIE(op) || trie->bitmap ) {
9024 int rangestart = -1;
9025 U8* bitmap = IS_ANYOF_TRIE(op) ? (U8*)ANYOF_BITMAP(o) : (U8*)TRIE_BITMAP(trie);
9027 for (i = 0; i <= 256; i++) {
9028 if (i < 256 && BITMAP_TEST(bitmap,i)) {
9029 if (rangestart == -1)
9031 } else if (rangestart != -1) {
9032 if (i <= rangestart + 3)
9033 for (; rangestart < i; rangestart++)
9034 put_byte(sv, rangestart);
9036 put_byte(sv, rangestart);
9038 put_byte(sv, i - 1);
9046 } else if (k == CURLY) {
9047 if (OP(o) == CURLYM || OP(o) == CURLYN || OP(o) == CURLYX)
9048 Perl_sv_catpvf(aTHX_ sv, "[%d]", o->flags); /* Parenth number */
9049 Perl_sv_catpvf(aTHX_ sv, " {%d,%d}", ARG1(o), ARG2(o));
9051 else if (k == WHILEM && o->flags) /* Ordinal/of */
9052 Perl_sv_catpvf(aTHX_ sv, "[%d/%d]", o->flags & 0xf, o->flags>>4);
9053 else if (k == REF || k == OPEN || k == CLOSE || k == GROUPP || OP(o)==ACCEPT) {
9054 Perl_sv_catpvf(aTHX_ sv, "%d", (int)ARG(o)); /* Parenth number */
9055 if ( RXp_PAREN_NAMES(prog) ) {
9056 if ( k != REF || OP(o) < NREF) {
9057 AV *list= (AV *)progi->data->data[progi->name_list_idx];
9058 SV **name= av_fetch(list, ARG(o), 0 );
9060 Perl_sv_catpvf(aTHX_ sv, " '%"SVf"'", SVfARG(*name));
9063 AV *list= (AV *)progi->data->data[ progi->name_list_idx ];
9064 SV *sv_dat=(SV*)progi->data->data[ ARG( o ) ];
9065 I32 *nums=(I32*)SvPVX(sv_dat);
9066 SV **name= av_fetch(list, nums[0], 0 );
9069 for ( n=0; n<SvIVX(sv_dat); n++ ) {
9070 Perl_sv_catpvf(aTHX_ sv, "%s%"IVdf,
9071 (n ? "," : ""), (IV)nums[n]);
9073 Perl_sv_catpvf(aTHX_ sv, " '%"SVf"'", SVfARG(*name));
9077 } else if (k == GOSUB)
9078 Perl_sv_catpvf(aTHX_ sv, "%d[%+d]", (int)ARG(o),(int)ARG2L(o)); /* Paren and offset */
9079 else if (k == VERB) {
9081 Perl_sv_catpvf(aTHX_ sv, ":%"SVf,
9082 SVfARG((SV*)progi->data->data[ ARG( o ) ]));
9083 } else if (k == LOGICAL)
9084 Perl_sv_catpvf(aTHX_ sv, "[%d]", o->flags); /* 2: embedded, otherwise 1 */
9085 else if (k == FOLDCHAR)
9086 Perl_sv_catpvf(aTHX_ sv, "[0x%"UVXf"]", PTR2UV(ARG(o)) );
9087 else if (k == ANYOF) {
9088 int i, rangestart = -1;
9089 const U8 flags = ANYOF_FLAGS(o);
9091 /* Should be synchronized with * ANYOF_ #xdefines in regcomp.h */
9092 static const char * const anyofs[] = {
9125 if (flags & ANYOF_LOCALE)
9126 sv_catpvs(sv, "{loc}");
9127 if (flags & ANYOF_FOLD)
9128 sv_catpvs(sv, "{i}");
9129 Perl_sv_catpvf(aTHX_ sv, "[%s", PL_colors[0]);
9130 if (flags & ANYOF_INVERT)
9132 for (i = 0; i <= 256; i++) {
9133 if (i < 256 && ANYOF_BITMAP_TEST(o,i)) {
9134 if (rangestart == -1)
9136 } else if (rangestart != -1) {
9137 if (i <= rangestart + 3)
9138 for (; rangestart < i; rangestart++)
9139 put_byte(sv, rangestart);
9141 put_byte(sv, rangestart);
9143 put_byte(sv, i - 1);
9149 if (o->flags & ANYOF_CLASS)
9150 for (i = 0; i < (int)(sizeof(anyofs)/sizeof(char*)); i++)
9151 if (ANYOF_CLASS_TEST(o,i))
9152 sv_catpv(sv, anyofs[i]);
9154 if (flags & ANYOF_UNICODE)
9155 sv_catpvs(sv, "{unicode}");
9156 else if (flags & ANYOF_UNICODE_ALL)
9157 sv_catpvs(sv, "{unicode_all}");
9161 SV * const sw = regclass_swash(prog, o, FALSE, &lv, 0);
9165 U8 s[UTF8_MAXBYTES_CASE+1];
9167 for (i = 0; i <= 256; i++) { /* just the first 256 */
9168 uvchr_to_utf8(s, i);
9170 if (i < 256 && swash_fetch(sw, s, TRUE)) {
9171 if (rangestart == -1)
9173 } else if (rangestart != -1) {
9174 if (i <= rangestart + 3)
9175 for (; rangestart < i; rangestart++) {
9176 const U8 * const e = uvchr_to_utf8(s,rangestart);
9178 for(p = s; p < e; p++)
9182 const U8 *e = uvchr_to_utf8(s,rangestart);
9184 for (p = s; p < e; p++)
9187 e = uvchr_to_utf8(s, i-1);
9188 for (p = s; p < e; p++)
9195 sv_catpvs(sv, "..."); /* et cetera */
9199 char *s = savesvpv(lv);
9200 char * const origs = s;
9202 while (*s && *s != '\n')
9206 const char * const t = ++s;
9224 Perl_sv_catpvf(aTHX_ sv, "%s]", PL_colors[1]);
9226 else if (k == BRANCHJ && (OP(o) == UNLESSM || OP(o) == IFMATCH))
9227 Perl_sv_catpvf(aTHX_ sv, "[%d]", -(o->flags));
9229 PERL_UNUSED_CONTEXT;
9230 PERL_UNUSED_ARG(sv);
9232 PERL_UNUSED_ARG(prog);
9233 #endif /* DEBUGGING */
9237 Perl_re_intuit_string(pTHX_ REGEXP * const r)
9238 { /* Assume that RE_INTUIT is set */
9240 struct regexp *const prog = (struct regexp *)SvANY(r);
9241 GET_RE_DEBUG_FLAGS_DECL;
9243 PERL_ARGS_ASSERT_RE_INTUIT_STRING;
9244 PERL_UNUSED_CONTEXT;
9248 const char * const s = SvPV_nolen_const(prog->check_substr
9249 ? prog->check_substr : prog->check_utf8);
9251 if (!PL_colorset) reginitcolors();
9252 PerlIO_printf(Perl_debug_log,
9253 "%sUsing REx %ssubstr:%s \"%s%.60s%s%s\"\n",
9255 prog->check_substr ? "" : "utf8 ",
9256 PL_colors[5],PL_colors[0],
9259 (strlen(s) > 60 ? "..." : ""));
9262 return prog->check_substr ? prog->check_substr : prog->check_utf8;
9268 handles refcounting and freeing the perl core regexp structure. When
9269 it is necessary to actually free the structure the first thing it
9270 does is call the 'free' method of the regexp_engine associated to to
9271 the regexp, allowing the handling of the void *pprivate; member
9272 first. (This routine is not overridable by extensions, which is why
9273 the extensions free is called first.)
9275 See regdupe and regdupe_internal if you change anything here.
9277 #ifndef PERL_IN_XSUB_RE
9279 Perl_pregfree(pTHX_ REGEXP *r)
9285 Perl_pregfree2(pTHX_ REGEXP *rx)
9288 struct regexp *const r = (struct regexp *)SvANY(rx);
9289 GET_RE_DEBUG_FLAGS_DECL;
9291 PERL_ARGS_ASSERT_PREGFREE2;
9294 ReREFCNT_dec(r->mother_re);
9296 CALLREGFREE_PVT(rx); /* free the private data */
9297 if (RXp_PAREN_NAMES(r))
9298 SvREFCNT_dec(RXp_PAREN_NAMES(r));
9301 if (r->anchored_substr)
9302 SvREFCNT_dec(r->anchored_substr);
9303 if (r->anchored_utf8)
9304 SvREFCNT_dec(r->anchored_utf8);
9305 if (r->float_substr)
9306 SvREFCNT_dec(r->float_substr);
9308 SvREFCNT_dec(r->float_utf8);
9309 Safefree(r->substrs);
9311 RX_MATCH_COPY_FREE(rx);
9312 #ifdef PERL_OLD_COPY_ON_WRITE
9314 SvREFCNT_dec(r->saved_copy);
9322 This is a hacky workaround to the structural issue of match results
9323 being stored in the regexp structure which is in turn stored in
9324 PL_curpm/PL_reg_curpm. The problem is that due to qr// the pattern
9325 could be PL_curpm in multiple contexts, and could require multiple
9326 result sets being associated with the pattern simultaneously, such
9327 as when doing a recursive match with (??{$qr})
9329 The solution is to make a lightweight copy of the regexp structure
9330 when a qr// is returned from the code executed by (??{$qr}) this
9331 lightweight copy doesnt actually own any of its data except for
9332 the starp/end and the actual regexp structure itself.
9338 Perl_reg_temp_copy (pTHX_ REGEXP *rx)
9340 REGEXP *ret_x = (REGEXP*) newSV_type(SVt_REGEXP);
9341 struct regexp *ret = (struct regexp *)SvANY(ret_x);
9342 struct regexp *const r = (struct regexp *)SvANY(rx);
9343 register const I32 npar = r->nparens+1;
9345 PERL_ARGS_ASSERT_REG_TEMP_COPY;
9347 (void)ReREFCNT_inc(rx);
9348 /* We can take advantage of the existing "copied buffer" mechanism in SVs
9349 by pointing directly at the buffer, but flagging that the allocated
9350 space in the copy is zero. As we've just done a struct copy, it's now
9351 a case of zero-ing that, rather than copying the current length. */
9352 SvPV_set(ret_x, RX_WRAPPED(rx));
9353 SvFLAGS(ret_x) |= SvFLAGS(rx) & (SVf_POK|SVp_POK|SVf_UTF8);
9354 StructCopy(&(r->xpv_cur), &(ret->xpv_cur), struct regexp_allocated);
9355 SvLEN_set(ret_x, 0);
9356 Newx(ret->offs, npar, regexp_paren_pair);
9357 Copy(r->offs, ret->offs, npar, regexp_paren_pair);
9359 Newx(ret->substrs, 1, struct reg_substr_data);
9360 StructCopy(r->substrs, ret->substrs, struct reg_substr_data);
9362 SvREFCNT_inc_void(ret->anchored_substr);
9363 SvREFCNT_inc_void(ret->anchored_utf8);
9364 SvREFCNT_inc_void(ret->float_substr);
9365 SvREFCNT_inc_void(ret->float_utf8);
9367 /* check_substr and check_utf8, if non-NULL, point to either their
9368 anchored or float namesakes, and don't hold a second reference. */
9370 RX_MATCH_COPIED_off(ret_x);
9371 #ifdef PERL_OLD_COPY_ON_WRITE
9372 ret->saved_copy = NULL;
9374 ret->mother_re = rx;
9381 /* regfree_internal()
9383 Free the private data in a regexp. This is overloadable by
9384 extensions. Perl takes care of the regexp structure in pregfree(),
9385 this covers the *pprivate pointer which technically perldoesnt
9386 know about, however of course we have to handle the
9387 regexp_internal structure when no extension is in use.
9389 Note this is called before freeing anything in the regexp
9394 Perl_regfree_internal(pTHX_ REGEXP * const rx)
9397 struct regexp *const r = (struct regexp *)SvANY(rx);
9399 GET_RE_DEBUG_FLAGS_DECL;
9401 PERL_ARGS_ASSERT_REGFREE_INTERNAL;
9407 SV *dsv= sv_newmortal();
9408 RE_PV_QUOTED_DECL(s, RX_UTF8(rx),
9409 dsv, RX_PRECOMP(rx), RX_PRELEN(rx), 60);
9410 PerlIO_printf(Perl_debug_log,"%sFreeing REx:%s %s\n",
9411 PL_colors[4],PL_colors[5],s);
9414 #ifdef RE_TRACK_PATTERN_OFFSETS
9416 Safefree(ri->u.offsets); /* 20010421 MJD */
9419 int n = ri->data->count;
9420 PAD* new_comppad = NULL;
9425 /* If you add a ->what type here, update the comment in regcomp.h */
9426 switch (ri->data->what[n]) {
9430 SvREFCNT_dec((SV*)ri->data->data[n]);
9433 Safefree(ri->data->data[n]);
9436 new_comppad = (AV*)ri->data->data[n];
9439 if (new_comppad == NULL)
9440 Perl_croak(aTHX_ "panic: pregfree comppad");
9441 PAD_SAVE_LOCAL(old_comppad,
9442 /* Watch out for global destruction's random ordering. */
9443 (SvTYPE(new_comppad) == SVt_PVAV) ? new_comppad : NULL
9446 refcnt = OpREFCNT_dec((OP_4tree*)ri->data->data[n]);
9449 op_free((OP_4tree*)ri->data->data[n]);
9451 PAD_RESTORE_LOCAL(old_comppad);
9452 SvREFCNT_dec((SV*)new_comppad);
9458 { /* Aho Corasick add-on structure for a trie node.
9459 Used in stclass optimization only */
9461 reg_ac_data *aho=(reg_ac_data*)ri->data->data[n];
9463 refcount = --aho->refcount;
9466 PerlMemShared_free(aho->states);
9467 PerlMemShared_free(aho->fail);
9468 /* do this last!!!! */
9469 PerlMemShared_free(ri->data->data[n]);
9470 PerlMemShared_free(ri->regstclass);
9476 /* trie structure. */
9478 reg_trie_data *trie=(reg_trie_data*)ri->data->data[n];
9480 refcount = --trie->refcount;
9483 PerlMemShared_free(trie->charmap);
9484 PerlMemShared_free(trie->states);
9485 PerlMemShared_free(trie->trans);
9487 PerlMemShared_free(trie->bitmap);
9489 PerlMemShared_free(trie->wordlen);
9491 PerlMemShared_free(trie->jump);
9493 PerlMemShared_free(trie->nextword);
9494 /* do this last!!!! */
9495 PerlMemShared_free(ri->data->data[n]);
9500 Perl_croak(aTHX_ "panic: regfree data code '%c'", ri->data->what[n]);
9503 Safefree(ri->data->what);
9510 #define sv_dup_inc(s,t) SvREFCNT_inc(sv_dup(s,t))
9511 #define av_dup_inc(s,t) (AV*)SvREFCNT_inc(sv_dup((const SV *)s,t))
9512 #define hv_dup_inc(s,t) (HV*)SvREFCNT_inc(sv_dup((const SV *)s,t))
9513 #define SAVEPVN(p,n) ((p) ? savepvn(p,n) : NULL)
9516 re_dup - duplicate a regexp.
9518 This routine is expected to clone a given regexp structure. It is only
9519 compiled under USE_ITHREADS.
9521 After all of the core data stored in struct regexp is duplicated
9522 the regexp_engine.dupe method is used to copy any private data
9523 stored in the *pprivate pointer. This allows extensions to handle
9524 any duplication it needs to do.
9526 See pregfree() and regfree_internal() if you change anything here.
9528 #if defined(USE_ITHREADS)
9529 #ifndef PERL_IN_XSUB_RE
9531 Perl_re_dup_guts(pTHX_ const REGEXP *sstr, REGEXP *dstr, CLONE_PARAMS *param)
9535 const struct regexp *r = (const struct regexp *)SvANY(sstr);
9536 struct regexp *ret = (struct regexp *)SvANY(dstr);
9538 PERL_ARGS_ASSERT_RE_DUP_GUTS;
9540 npar = r->nparens+1;
9541 Newx(ret->offs, npar, regexp_paren_pair);
9542 Copy(r->offs, ret->offs, npar, regexp_paren_pair);
9544 /* no need to copy these */
9545 Newx(ret->swap, npar, regexp_paren_pair);
9549 /* Do it this way to avoid reading from *r after the StructCopy().
9550 That way, if any of the sv_dup_inc()s dislodge *r from the L1
9551 cache, it doesn't matter. */
9552 const bool anchored = r->check_substr
9553 ? r->check_substr == r->anchored_substr
9554 : r->check_utf8 == r->anchored_utf8;
9555 Newx(ret->substrs, 1, struct reg_substr_data);
9556 StructCopy(r->substrs, ret->substrs, struct reg_substr_data);
9558 ret->anchored_substr = sv_dup_inc(ret->anchored_substr, param);
9559 ret->anchored_utf8 = sv_dup_inc(ret->anchored_utf8, param);
9560 ret->float_substr = sv_dup_inc(ret->float_substr, param);
9561 ret->float_utf8 = sv_dup_inc(ret->float_utf8, param);
9563 /* check_substr and check_utf8, if non-NULL, point to either their
9564 anchored or float namesakes, and don't hold a second reference. */
9566 if (ret->check_substr) {
9568 assert(r->check_utf8 == r->anchored_utf8);
9569 ret->check_substr = ret->anchored_substr;
9570 ret->check_utf8 = ret->anchored_utf8;
9572 assert(r->check_substr == r->float_substr);
9573 assert(r->check_utf8 == r->float_utf8);
9574 ret->check_substr = ret->float_substr;
9575 ret->check_utf8 = ret->float_utf8;
9577 } else if (ret->check_utf8) {
9579 ret->check_utf8 = ret->anchored_utf8;
9581 ret->check_utf8 = ret->float_utf8;
9586 RXp_PAREN_NAMES(ret) = hv_dup_inc(RXp_PAREN_NAMES(ret), param);
9589 RXi_SET(ret,CALLREGDUPE_PVT(dstr,param));
9591 if (RX_MATCH_COPIED(dstr))
9592 ret->subbeg = SAVEPVN(ret->subbeg, ret->sublen);
9595 #ifdef PERL_OLD_COPY_ON_WRITE
9596 ret->saved_copy = NULL;
9599 ret->mother_re = NULL;
9602 #endif /* PERL_IN_XSUB_RE */
9607 This is the internal complement to regdupe() which is used to copy
9608 the structure pointed to by the *pprivate pointer in the regexp.
9609 This is the core version of the extension overridable cloning hook.
9610 The regexp structure being duplicated will be copied by perl prior
9611 to this and will be provided as the regexp *r argument, however
9612 with the /old/ structures pprivate pointer value. Thus this routine
9613 may override any copying normally done by perl.
9615 It returns a pointer to the new regexp_internal structure.
9619 Perl_regdupe_internal(pTHX_ REGEXP * const rx, CLONE_PARAMS *param)
9622 struct regexp *const r = (struct regexp *)SvANY(rx);
9623 regexp_internal *reti;
9627 PERL_ARGS_ASSERT_REGDUPE_INTERNAL;
9629 npar = r->nparens+1;
9632 Newxc(reti, sizeof(regexp_internal) + len*sizeof(regnode), char, regexp_internal);
9633 Copy(ri->program, reti->program, len+1, regnode);
9636 reti->regstclass = NULL;
9640 const int count = ri->data->count;
9643 Newxc(d, sizeof(struct reg_data) + count*sizeof(void *),
9644 char, struct reg_data);
9645 Newx(d->what, count, U8);
9648 for (i = 0; i < count; i++) {
9649 d->what[i] = ri->data->what[i];
9650 switch (d->what[i]) {
9651 /* legal options are one of: sSfpontTu
9652 see also regcomp.h and pregfree() */
9655 case 'p': /* actually an AV, but the dup function is identical. */
9656 case 'u': /* actually an HV, but the dup function is identical. */
9657 d->data[i] = sv_dup_inc((SV *)ri->data->data[i], param);
9660 /* This is cheating. */
9661 Newx(d->data[i], 1, struct regnode_charclass_class);
9662 StructCopy(ri->data->data[i], d->data[i],
9663 struct regnode_charclass_class);
9664 reti->regstclass = (regnode*)d->data[i];
9667 /* Compiled op trees are readonly and in shared memory,
9668 and can thus be shared without duplication. */
9670 d->data[i] = (void*)OpREFCNT_inc((OP*)ri->data->data[i]);
9674 /* Trie stclasses are readonly and can thus be shared
9675 * without duplication. We free the stclass in pregfree
9676 * when the corresponding reg_ac_data struct is freed.
9678 reti->regstclass= ri->regstclass;
9682 ((reg_trie_data*)ri->data->data[i])->refcount++;
9686 d->data[i] = ri->data->data[i];
9689 Perl_croak(aTHX_ "panic: re_dup unknown data code '%c'", ri->data->what[i]);
9698 reti->name_list_idx = ri->name_list_idx;
9700 #ifdef RE_TRACK_PATTERN_OFFSETS
9701 if (ri->u.offsets) {
9702 Newx(reti->u.offsets, 2*len+1, U32);
9703 Copy(ri->u.offsets, reti->u.offsets, 2*len+1, U32);
9706 SetProgLen(reti,len);
9712 #endif /* USE_ITHREADS */
9714 #ifndef PERL_IN_XSUB_RE
9717 - regnext - dig the "next" pointer out of a node
9720 Perl_regnext(pTHX_ register regnode *p)
9723 register I32 offset;
9728 offset = (reg_off_by_arg[OP(p)] ? ARG(p) : NEXT_OFF(p));
9737 S_re_croak2(pTHX_ const char* pat1,const char* pat2,...)
9740 STRLEN l1 = strlen(pat1);
9741 STRLEN l2 = strlen(pat2);
9744 const char *message;
9746 PERL_ARGS_ASSERT_RE_CROAK2;
9752 Copy(pat1, buf, l1 , char);
9753 Copy(pat2, buf + l1, l2 , char);
9754 buf[l1 + l2] = '\n';
9755 buf[l1 + l2 + 1] = '\0';
9757 /* ANSI variant takes additional second argument */
9758 va_start(args, pat2);
9762 msv = vmess(buf, &args);
9764 message = SvPV_const(msv,l1);
9767 Copy(message, buf, l1 , char);
9768 buf[l1-1] = '\0'; /* Overwrite \n */
9769 Perl_croak(aTHX_ "%s", buf);
9772 /* XXX Here's a total kludge. But we need to re-enter for swash routines. */
9774 #ifndef PERL_IN_XSUB_RE
9776 Perl_save_re_context(pTHX)
9780 struct re_save_state *state;
9782 SAVEVPTR(PL_curcop);
9783 SSGROW(SAVESTACK_ALLOC_FOR_RE_SAVE_STATE + 1);
9785 state = (struct re_save_state *)(PL_savestack + PL_savestack_ix);
9786 PL_savestack_ix += SAVESTACK_ALLOC_FOR_RE_SAVE_STATE;
9787 SSPUSHINT(SAVEt_RE_STATE);
9789 Copy(&PL_reg_state, state, 1, struct re_save_state);
9791 PL_reg_start_tmp = 0;
9792 PL_reg_start_tmpl = 0;
9793 PL_reg_oldsaved = NULL;
9794 PL_reg_oldsavedlen = 0;
9796 PL_reg_leftiter = 0;
9797 PL_reg_poscache = NULL;
9798 PL_reg_poscache_size = 0;
9799 #ifdef PERL_OLD_COPY_ON_WRITE
9803 /* Save $1..$n (#18107: UTF-8 s/(\w+)/uc($1)/e); AMS 20021106. */
9805 const REGEXP * const rx = PM_GETRE(PL_curpm);
9808 for (i = 1; i <= RX_NPARENS(rx); i++) {
9809 char digits[TYPE_CHARS(long)];
9810 const STRLEN len = my_snprintf(digits, sizeof(digits), "%lu", (long)i);
9811 GV *const *const gvp
9812 = (GV**)hv_fetch(PL_defstash, digits, len, 0);
9815 GV * const gv = *gvp;
9816 if (SvTYPE(gv) == SVt_PVGV && GvSV(gv))
9826 clear_re(pTHX_ void *r)
9829 ReREFCNT_dec((REGEXP *)r);
9835 S_put_byte(pTHX_ SV *sv, int c)
9837 PERL_ARGS_ASSERT_PUT_BYTE;
9839 /* Our definition of isPRINT() ignores locales, so only bytes that are
9840 not part of UTF-8 are considered printable. I assume that the same
9841 holds for UTF-EBCDIC.
9842 Also, code point 255 is not printable in either (it's E0 in EBCDIC,
9843 which Wikipedia says:
9845 EO, or Eight Ones, is an 8-bit EBCDIC character code represented as all
9846 ones (binary 1111 1111, hexadecimal FF). It is similar, but not
9847 identical, to the ASCII delete (DEL) or rubout control character.
9848 ) So the old condition can be simplified to !isPRINT(c) */
9850 Perl_sv_catpvf(aTHX_ sv, "\\%o", c);
9852 const char string = c;
9853 if (c == '-' || c == ']' || c == '\\' || c == '^')
9854 sv_catpvs(sv, "\\");
9855 sv_catpvn(sv, &string, 1);
9860 #define CLEAR_OPTSTART \
9861 if (optstart) STMT_START { \
9862 DEBUG_OPTIMISE_r(PerlIO_printf(Perl_debug_log, " (%"IVdf" nodes)\n", (IV)(node - optstart))); \
9866 #define DUMPUNTIL(b,e) CLEAR_OPTSTART; node=dumpuntil(r,start,(b),(e),last,sv,indent+1,depth+1);
9868 STATIC const regnode *
9869 S_dumpuntil(pTHX_ const regexp *r, const regnode *start, const regnode *node,
9870 const regnode *last, const regnode *plast,
9871 SV* sv, I32 indent, U32 depth)
9874 register U8 op = PSEUDO; /* Arbitrary non-END op. */
9875 register const regnode *next;
9876 const regnode *optstart= NULL;
9879 GET_RE_DEBUG_FLAGS_DECL;
9881 PERL_ARGS_ASSERT_DUMPUNTIL;
9883 #ifdef DEBUG_DUMPUNTIL
9884 PerlIO_printf(Perl_debug_log, "--- %d : %d - %d - %d\n",indent,node-start,
9885 last ? last-start : 0,plast ? plast-start : 0);
9888 if (plast && plast < last)
9891 while (PL_regkind[op] != END && (!last || node < last)) {
9892 /* While that wasn't END last time... */
9895 if (op == CLOSE || op == WHILEM)
9897 next = regnext((regnode *)node);
9900 if (OP(node) == OPTIMIZED) {
9901 if (!optstart && RE_DEBUG_FLAG(RE_DEBUG_COMPILE_OPTIMISE))
9908 regprop(r, sv, node);
9909 PerlIO_printf(Perl_debug_log, "%4"IVdf":%*s%s", (IV)(node - start),
9910 (int)(2*indent + 1), "", SvPVX_const(sv));
9912 if (OP(node) != OPTIMIZED) {
9913 if (next == NULL) /* Next ptr. */
9914 PerlIO_printf(Perl_debug_log, " (0)");
9915 else if (PL_regkind[(U8)op] == BRANCH && PL_regkind[OP(next)] != BRANCH )
9916 PerlIO_printf(Perl_debug_log, " (FAIL)");
9918 PerlIO_printf(Perl_debug_log, " (%"IVdf")", (IV)(next - start));
9919 (void)PerlIO_putc(Perl_debug_log, '\n');
9923 if (PL_regkind[(U8)op] == BRANCHJ) {
9926 register const regnode *nnode = (OP(next) == LONGJMP
9927 ? regnext((regnode *)next)
9929 if (last && nnode > last)
9931 DUMPUNTIL(NEXTOPER(NEXTOPER(node)), nnode);
9934 else if (PL_regkind[(U8)op] == BRANCH) {
9936 DUMPUNTIL(NEXTOPER(node), next);
9938 else if ( PL_regkind[(U8)op] == TRIE ) {
9939 const regnode *this_trie = node;
9940 const char op = OP(node);
9941 const U32 n = ARG(node);
9942 const reg_ac_data * const ac = op>=AHOCORASICK ?
9943 (reg_ac_data *)ri->data->data[n] :
9945 const reg_trie_data * const trie =
9946 (reg_trie_data*)ri->data->data[op<AHOCORASICK ? n : ac->trie];
9948 AV *const trie_words = (AV *) ri->data->data[n + TRIE_WORDS_OFFSET];
9950 const regnode *nextbranch= NULL;
9952 sv_setpvn(sv, "", 0);
9953 for (word_idx= 0; word_idx < (I32)trie->wordcount; word_idx++) {
9954 SV ** const elem_ptr = av_fetch(trie_words,word_idx,0);
9956 PerlIO_printf(Perl_debug_log, "%*s%s ",
9957 (int)(2*(indent+3)), "",
9958 elem_ptr ? pv_pretty(sv, SvPV_nolen_const(*elem_ptr), SvCUR(*elem_ptr), 60,
9959 PL_colors[0], PL_colors[1],
9960 (SvUTF8(*elem_ptr) ? PERL_PV_ESCAPE_UNI : 0) |
9961 PERL_PV_PRETTY_ELLIPSES |
9967 U16 dist= trie->jump[word_idx+1];
9968 PerlIO_printf(Perl_debug_log, "(%"UVuf")\n",
9969 (UV)((dist ? this_trie + dist : next) - start));
9972 nextbranch= this_trie + trie->jump[0];
9973 DUMPUNTIL(this_trie + dist, nextbranch);
9975 if (nextbranch && PL_regkind[OP(nextbranch)]==BRANCH)
9976 nextbranch= regnext((regnode *)nextbranch);
9978 PerlIO_printf(Perl_debug_log, "\n");
9981 if (last && next > last)
9986 else if ( op == CURLY ) { /* "next" might be very big: optimizer */
9987 DUMPUNTIL(NEXTOPER(node) + EXTRA_STEP_2ARGS,
9988 NEXTOPER(node) + EXTRA_STEP_2ARGS + 1);
9990 else if (PL_regkind[(U8)op] == CURLY && op != CURLYX) {
9992 DUMPUNTIL(NEXTOPER(node) + EXTRA_STEP_2ARGS, next);
9994 else if ( op == PLUS || op == STAR) {
9995 DUMPUNTIL(NEXTOPER(node), NEXTOPER(node) + 1);
9997 else if (op == ANYOF) {
9998 /* arglen 1 + class block */
9999 node += 1 + ((ANYOF_FLAGS(node) & ANYOF_LARGE)
10000 ? ANYOF_CLASS_SKIP : ANYOF_SKIP);
10001 node = NEXTOPER(node);
10003 else if (PL_regkind[(U8)op] == EXACT) {
10004 /* Literal string, where present. */
10005 node += NODE_SZ_STR(node) - 1;
10006 node = NEXTOPER(node);
10009 node = NEXTOPER(node);
10010 node += regarglen[(U8)op];
10012 if (op == CURLYX || op == OPEN)
10016 #ifdef DEBUG_DUMPUNTIL
10017 PerlIO_printf(Perl_debug_log, "--- %d\n", (int)indent);
10022 #endif /* DEBUGGING */
10026 * c-indentation-style: bsd
10027 * c-basic-offset: 4
10028 * indent-tabs-mode: t
10031 * ex: set ts=8 sts=4 sw=4 noet: