5 * "A fair jaw-cracker dwarf-language must be." --Samwise Gamgee
8 /* This file contains functions for compiling a regular expression. See
9 * also regexec.c which funnily enough, contains functions for executing
10 * a regular expression.
12 * This file is also copied at build time to ext/re/re_comp.c, where
13 * it's built with -DPERL_EXT_RE_BUILD -DPERL_EXT_RE_DEBUG -DPERL_EXT.
14 * This causes the main functions to be compiled under new names and with
15 * debugging support added, which makes "use re 'debug'" work.
18 /* NOTE: this is derived from Henry Spencer's regexp code, and should not
19 * confused with the original package (see point 3 below). Thanks, Henry!
22 /* Additional note: this code is very heavily munged from Henry's version
23 * in places. In some spots I've traded clarity for efficiency, so don't
24 * blame Henry for some of the lack of readability.
27 /* The names of the functions have been changed from regcomp and
28 * regexec to pregcomp and pregexec in order to avoid conflicts
29 * with the POSIX routines of the same names.
32 #ifdef PERL_EXT_RE_BUILD
37 * pregcomp and pregexec -- regsub and regerror are not used in perl
39 * Copyright (c) 1986 by University of Toronto.
40 * Written by Henry Spencer. Not derived from licensed software.
42 * Permission is granted to anyone to use this software for any
43 * purpose on any computer system, and to redistribute it freely,
44 * subject to the following restrictions:
46 * 1. The author is not responsible for the consequences of use of
47 * this software, no matter how awful, even if they arise
50 * 2. The origin of this software must not be misrepresented, either
51 * by explicit claim or by omission.
53 * 3. Altered versions must be plainly marked as such, and must not
54 * be misrepresented as being the original software.
57 **** Alterations to Henry's code are...
59 **** Copyright (C) 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
60 **** 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007 by Larry Wall and others
62 **** You may distribute under the terms of either the GNU General Public
63 **** License or the Artistic License, as specified in the README file.
66 * Beware that some of this code is subtly aware of the way operator
67 * precedence is structured in regular expressions. Serious changes in
68 * regular-expression syntax might require a total rethink.
71 #define PERL_IN_REGCOMP_C
74 #ifndef PERL_IN_XSUB_RE
79 #ifdef PERL_IN_XSUB_RE
90 # if defined(BUGGY_MSC6)
91 /* MSC 6.00A breaks on op/regexp.t test 85 unless we turn this off */
92 # pragma optimize("a",off)
93 /* But MSC 6.00A is happy with 'w', for aliases only across function calls*/
94 # pragma optimize("w",on )
95 # endif /* BUGGY_MSC6 */
102 typedef struct RExC_state_t {
103 U32 flags; /* are we folding, multilining? */
104 char *precomp; /* uncompiled string. */
105 REGEXP *rx_sv; /* The SV that is the regexp. */
106 regexp *rx; /* perl core regexp structure */
107 regexp_internal *rxi; /* internal data for regexp object pprivate field */
108 char *start; /* Start of input for compile */
109 char *end; /* End of input for compile */
110 char *parse; /* Input-scan pointer. */
111 I32 whilem_seen; /* number of WHILEM in this expr */
112 regnode *emit_start; /* Start of emitted-code area */
113 regnode *emit_bound; /* First regnode outside of the allocated space */
114 regnode *emit; /* Code-emit pointer; ®dummy = don't = compiling */
115 I32 naughty; /* How bad is this pattern? */
116 I32 sawback; /* Did we see \1, ...? */
118 I32 size; /* Code size. */
119 I32 npar; /* Capture buffer count, (OPEN). */
120 I32 cpar; /* Capture buffer count, (CLOSE). */
121 I32 nestroot; /* root parens we are in - used by accept */
125 regnode **open_parens; /* pointers to open parens */
126 regnode **close_parens; /* pointers to close parens */
127 regnode *opend; /* END node in program */
128 I32 utf8; /* whether the pattern is utf8 or not */
129 I32 orig_utf8; /* whether the pattern was originally in utf8 */
130 /* XXX use this for future optimisation of case
131 * where pattern must be upgraded to utf8. */
132 HV *charnames; /* cache of named sequences */
133 HV *paren_names; /* Paren names */
135 regnode **recurse; /* Recurse regops */
136 I32 recurse_count; /* Number of recurse regops */
138 char *starttry; /* -Dr: where regtry was called. */
139 #define RExC_starttry (pRExC_state->starttry)
142 const char *lastparse;
144 AV *paren_name_list; /* idx -> name */
145 #define RExC_lastparse (pRExC_state->lastparse)
146 #define RExC_lastnum (pRExC_state->lastnum)
147 #define RExC_paren_name_list (pRExC_state->paren_name_list)
151 #define RExC_flags (pRExC_state->flags)
152 #define RExC_precomp (pRExC_state->precomp)
153 #define RExC_rx_sv (pRExC_state->rx_sv)
154 #define RExC_rx (pRExC_state->rx)
155 #define RExC_rxi (pRExC_state->rxi)
156 #define RExC_start (pRExC_state->start)
157 #define RExC_end (pRExC_state->end)
158 #define RExC_parse (pRExC_state->parse)
159 #define RExC_whilem_seen (pRExC_state->whilem_seen)
160 #ifdef RE_TRACK_PATTERN_OFFSETS
161 #define RExC_offsets (pRExC_state->rxi->u.offsets) /* I am not like the others */
163 #define RExC_emit (pRExC_state->emit)
164 #define RExC_emit_start (pRExC_state->emit_start)
165 #define RExC_emit_bound (pRExC_state->emit_bound)
166 #define RExC_naughty (pRExC_state->naughty)
167 #define RExC_sawback (pRExC_state->sawback)
168 #define RExC_seen (pRExC_state->seen)
169 #define RExC_size (pRExC_state->size)
170 #define RExC_npar (pRExC_state->npar)
171 #define RExC_nestroot (pRExC_state->nestroot)
172 #define RExC_extralen (pRExC_state->extralen)
173 #define RExC_seen_zerolen (pRExC_state->seen_zerolen)
174 #define RExC_seen_evals (pRExC_state->seen_evals)
175 #define RExC_utf8 (pRExC_state->utf8)
176 #define RExC_orig_utf8 (pRExC_state->orig_utf8)
177 #define RExC_charnames (pRExC_state->charnames)
178 #define RExC_open_parens (pRExC_state->open_parens)
179 #define RExC_close_parens (pRExC_state->close_parens)
180 #define RExC_opend (pRExC_state->opend)
181 #define RExC_paren_names (pRExC_state->paren_names)
182 #define RExC_recurse (pRExC_state->recurse)
183 #define RExC_recurse_count (pRExC_state->recurse_count)
186 #define ISMULT1(c) ((c) == '*' || (c) == '+' || (c) == '?')
187 #define ISMULT2(s) ((*s) == '*' || (*s) == '+' || (*s) == '?' || \
188 ((*s) == '{' && regcurly(s)))
191 #undef SPSTART /* dratted cpp namespace... */
194 * Flags to be passed up and down.
196 #define WORST 0 /* Worst case. */
197 #define HASWIDTH 0x01 /* Known to match non-null strings. */
198 #define SIMPLE 0x02 /* Simple enough to be STAR/PLUS operand. */
199 #define SPSTART 0x04 /* Starts with * or +. */
200 #define TRYAGAIN 0x08 /* Weeded out a declaration. */
201 #define POSTPONED 0x10 /* (?1),(?&name), (??{...}) or similar */
203 #define REG_NODE_NUM(x) ((x) ? (int)((x)-RExC_emit_start) : -1)
205 /* whether trie related optimizations are enabled */
206 #if PERL_ENABLE_EXTENDED_TRIE_OPTIMISATION
207 #define TRIE_STUDY_OPT
208 #define FULL_TRIE_STUDY
214 #define PBYTE(u8str,paren) ((U8*)(u8str))[(paren) >> 3]
215 #define PBITVAL(paren) (1 << ((paren) & 7))
216 #define PAREN_TEST(u8str,paren) ( PBYTE(u8str,paren) & PBITVAL(paren))
217 #define PAREN_SET(u8str,paren) PBYTE(u8str,paren) |= PBITVAL(paren)
218 #define PAREN_UNSET(u8str,paren) PBYTE(u8str,paren) &= (~PBITVAL(paren))
221 /* About scan_data_t.
223 During optimisation we recurse through the regexp program performing
224 various inplace (keyhole style) optimisations. In addition study_chunk
225 and scan_commit populate this data structure with information about
226 what strings MUST appear in the pattern. We look for the longest
227 string that must appear for at a fixed location, and we look for the
228 longest string that may appear at a floating location. So for instance
233 Both 'FOO' and 'A' are fixed strings. Both 'B' and 'BAR' are floating
234 strings (because they follow a .* construct). study_chunk will identify
235 both FOO and BAR as being the longest fixed and floating strings respectively.
237 The strings can be composites, for instance
241 will result in a composite fixed substring 'foo'.
243 For each string some basic information is maintained:
245 - offset or min_offset
246 This is the position the string must appear at, or not before.
247 It also implicitly (when combined with minlenp) tells us how many
248 character must match before the string we are searching.
249 Likewise when combined with minlenp and the length of the string
250 tells us how many characters must appear after the string we have
254 Only used for floating strings. This is the rightmost point that
255 the string can appear at. Ifset to I32 max it indicates that the
256 string can occur infinitely far to the right.
259 A pointer to the minimum length of the pattern that the string
260 was found inside. This is important as in the case of positive
261 lookahead or positive lookbehind we can have multiple patterns
266 The minimum length of the pattern overall is 3, the minimum length
267 of the lookahead part is 3, but the minimum length of the part that
268 will actually match is 1. So 'FOO's minimum length is 3, but the
269 minimum length for the F is 1. This is important as the minimum length
270 is used to determine offsets in front of and behind the string being
271 looked for. Since strings can be composites this is the length of the
272 pattern at the time it was commited with a scan_commit. Note that
273 the length is calculated by study_chunk, so that the minimum lengths
274 are not known until the full pattern has been compiled, thus the
275 pointer to the value.
279 In the case of lookbehind the string being searched for can be
280 offset past the start point of the final matching string.
281 If this value was just blithely removed from the min_offset it would
282 invalidate some of the calculations for how many chars must match
283 before or after (as they are derived from min_offset and minlen and
284 the length of the string being searched for).
285 When the final pattern is compiled and the data is moved from the
286 scan_data_t structure into the regexp structure the information
287 about lookbehind is factored in, with the information that would
288 have been lost precalculated in the end_shift field for the
291 The fields pos_min and pos_delta are used to store the minimum offset
292 and the delta to the maximum offset at the current point in the pattern.
296 typedef struct scan_data_t {
297 /*I32 len_min; unused */
298 /*I32 len_delta; unused */
302 I32 last_end; /* min value, <0 unless valid. */
305 SV **longest; /* Either &l_fixed, or &l_float. */
306 SV *longest_fixed; /* longest fixed string found in pattern */
307 I32 offset_fixed; /* offset where it starts */
308 I32 *minlen_fixed; /* pointer to the minlen relevent to the string */
309 I32 lookbehind_fixed; /* is the position of the string modfied by LB */
310 SV *longest_float; /* longest floating string found in pattern */
311 I32 offset_float_min; /* earliest point in string it can appear */
312 I32 offset_float_max; /* latest point in string it can appear */
313 I32 *minlen_float; /* pointer to the minlen relevent to the string */
314 I32 lookbehind_float; /* is the position of the string modified by LB */
318 struct regnode_charclass_class *start_class;
322 * Forward declarations for pregcomp()'s friends.
325 static const scan_data_t zero_scan_data =
326 { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 ,0};
328 #define SF_BEFORE_EOL (SF_BEFORE_SEOL|SF_BEFORE_MEOL)
329 #define SF_BEFORE_SEOL 0x0001
330 #define SF_BEFORE_MEOL 0x0002
331 #define SF_FIX_BEFORE_EOL (SF_FIX_BEFORE_SEOL|SF_FIX_BEFORE_MEOL)
332 #define SF_FL_BEFORE_EOL (SF_FL_BEFORE_SEOL|SF_FL_BEFORE_MEOL)
335 # define SF_FIX_SHIFT_EOL (0+2)
336 # define SF_FL_SHIFT_EOL (0+4)
338 # define SF_FIX_SHIFT_EOL (+2)
339 # define SF_FL_SHIFT_EOL (+4)
342 #define SF_FIX_BEFORE_SEOL (SF_BEFORE_SEOL << SF_FIX_SHIFT_EOL)
343 #define SF_FIX_BEFORE_MEOL (SF_BEFORE_MEOL << SF_FIX_SHIFT_EOL)
345 #define SF_FL_BEFORE_SEOL (SF_BEFORE_SEOL << SF_FL_SHIFT_EOL)
346 #define SF_FL_BEFORE_MEOL (SF_BEFORE_MEOL << SF_FL_SHIFT_EOL) /* 0x20 */
347 #define SF_IS_INF 0x0040
348 #define SF_HAS_PAR 0x0080
349 #define SF_IN_PAR 0x0100
350 #define SF_HAS_EVAL 0x0200
351 #define SCF_DO_SUBSTR 0x0400
352 #define SCF_DO_STCLASS_AND 0x0800
353 #define SCF_DO_STCLASS_OR 0x1000
354 #define SCF_DO_STCLASS (SCF_DO_STCLASS_AND|SCF_DO_STCLASS_OR)
355 #define SCF_WHILEM_VISITED_POS 0x2000
357 #define SCF_TRIE_RESTUDY 0x4000 /* Do restudy? */
358 #define SCF_SEEN_ACCEPT 0x8000
360 #define UTF (RExC_utf8 != 0)
361 #define LOC ((RExC_flags & RXf_PMf_LOCALE) != 0)
362 #define FOLD ((RExC_flags & RXf_PMf_FOLD) != 0)
364 #define OOB_UNICODE 12345678
365 #define OOB_NAMEDCLASS -1
367 #define CHR_SVLEN(sv) (UTF ? sv_len_utf8(sv) : SvCUR(sv))
368 #define CHR_DIST(a,b) (UTF ? utf8_distance(a,b) : a - b)
371 /* length of regex to show in messages that don't mark a position within */
372 #define RegexLengthToShowInErrorMessages 127
375 * If MARKER[12] are adjusted, be sure to adjust the constants at the top
376 * of t/op/regmesg.t, the tests in t/op/re_tests, and those in
377 * op/pragma/warn/regcomp.
379 #define MARKER1 "<-- HERE" /* marker as it appears in the description */
380 #define MARKER2 " <-- HERE " /* marker as it appears within the regex */
382 #define REPORT_LOCATION " in regex; marked by " MARKER1 " in m/%.*s" MARKER2 "%s/"
385 * Calls SAVEDESTRUCTOR_X if needed, then calls Perl_croak with the given
386 * arg. Show regex, up to a maximum length. If it's too long, chop and add
389 #define _FAIL(code) STMT_START { \
390 const char *ellipses = ""; \
391 IV len = RExC_end - RExC_precomp; \
394 SAVEDESTRUCTOR_X(clear_re,(void*)RExC_rx_sv); \
395 if (len > RegexLengthToShowInErrorMessages) { \
396 /* chop 10 shorter than the max, to ensure meaning of "..." */ \
397 len = RegexLengthToShowInErrorMessages - 10; \
403 #define FAIL(msg) _FAIL( \
404 Perl_croak(aTHX_ "%s in regex m/%.*s%s/", \
405 msg, (int)len, RExC_precomp, ellipses))
407 #define FAIL2(msg,arg) _FAIL( \
408 Perl_croak(aTHX_ msg " in regex m/%.*s%s/", \
409 arg, (int)len, RExC_precomp, ellipses))
412 * Simple_vFAIL -- like FAIL, but marks the current location in the scan
414 #define Simple_vFAIL(m) STMT_START { \
415 const IV offset = RExC_parse - RExC_precomp; \
416 Perl_croak(aTHX_ "%s" REPORT_LOCATION, \
417 m, (int)offset, RExC_precomp, RExC_precomp + offset); \
421 * Calls SAVEDESTRUCTOR_X if needed, then Simple_vFAIL()
423 #define vFAIL(m) STMT_START { \
425 SAVEDESTRUCTOR_X(clear_re,(void*)RExC_rx_sv); \
430 * Like Simple_vFAIL(), but accepts two arguments.
432 #define Simple_vFAIL2(m,a1) STMT_START { \
433 const IV offset = RExC_parse - RExC_precomp; \
434 S_re_croak2(aTHX_ m, REPORT_LOCATION, a1, \
435 (int)offset, RExC_precomp, RExC_precomp + offset); \
439 * Calls SAVEDESTRUCTOR_X if needed, then Simple_vFAIL2().
441 #define vFAIL2(m,a1) STMT_START { \
443 SAVEDESTRUCTOR_X(clear_re,(void*)RExC_rx_sv); \
444 Simple_vFAIL2(m, a1); \
449 * Like Simple_vFAIL(), but accepts three arguments.
451 #define Simple_vFAIL3(m, a1, a2) STMT_START { \
452 const IV offset = RExC_parse - RExC_precomp; \
453 S_re_croak2(aTHX_ m, REPORT_LOCATION, a1, a2, \
454 (int)offset, RExC_precomp, RExC_precomp + offset); \
458 * Calls SAVEDESTRUCTOR_X if needed, then Simple_vFAIL3().
460 #define vFAIL3(m,a1,a2) STMT_START { \
462 SAVEDESTRUCTOR_X(clear_re,(void*)RExC_rx_sv); \
463 Simple_vFAIL3(m, a1, a2); \
467 * Like Simple_vFAIL(), but accepts four arguments.
469 #define Simple_vFAIL4(m, a1, a2, a3) STMT_START { \
470 const IV offset = RExC_parse - RExC_precomp; \
471 S_re_croak2(aTHX_ m, REPORT_LOCATION, a1, a2, a3, \
472 (int)offset, RExC_precomp, RExC_precomp + offset); \
475 #define vWARN(loc,m) STMT_START { \
476 const IV offset = loc - RExC_precomp; \
477 Perl_warner(aTHX_ packWARN(WARN_REGEXP), "%s" REPORT_LOCATION, \
478 m, (int)offset, RExC_precomp, RExC_precomp + offset); \
481 #define vWARNdep(loc,m) STMT_START { \
482 const IV offset = loc - RExC_precomp; \
483 Perl_warner(aTHX_ packWARN2(WARN_DEPRECATED, WARN_REGEXP), \
484 "%s" REPORT_LOCATION, \
485 m, (int)offset, RExC_precomp, RExC_precomp + offset); \
489 #define vWARN2(loc, m, a1) STMT_START { \
490 const IV offset = loc - RExC_precomp; \
491 Perl_warner(aTHX_ packWARN(WARN_REGEXP), m REPORT_LOCATION, \
492 a1, (int)offset, RExC_precomp, RExC_precomp + offset); \
495 #define vWARN3(loc, m, a1, a2) STMT_START { \
496 const IV offset = loc - RExC_precomp; \
497 Perl_warner(aTHX_ packWARN(WARN_REGEXP), m REPORT_LOCATION, \
498 a1, a2, (int)offset, RExC_precomp, RExC_precomp + offset); \
501 #define vWARN4(loc, m, a1, a2, a3) STMT_START { \
502 const IV offset = loc - RExC_precomp; \
503 Perl_warner(aTHX_ packWARN(WARN_REGEXP), m REPORT_LOCATION, \
504 a1, a2, a3, (int)offset, RExC_precomp, RExC_precomp + offset); \
507 #define vWARN5(loc, m, a1, a2, a3, a4) STMT_START { \
508 const IV offset = loc - RExC_precomp; \
509 Perl_warner(aTHX_ packWARN(WARN_REGEXP), m REPORT_LOCATION, \
510 a1, a2, a3, a4, (int)offset, RExC_precomp, RExC_precomp + offset); \
514 /* Allow for side effects in s */
515 #define REGC(c,s) STMT_START { \
516 if (!SIZE_ONLY) *(s) = (c); else (void)(s); \
519 /* Macros for recording node offsets. 20001227 mjd@plover.com
520 * Nodes are numbered 1, 2, 3, 4. Node #n's position is recorded in
521 * element 2*n-1 of the array. Element #2n holds the byte length node #n.
522 * Element 0 holds the number n.
523 * Position is 1 indexed.
525 #ifndef RE_TRACK_PATTERN_OFFSETS
526 #define Set_Node_Offset_To_R(node,byte)
527 #define Set_Node_Offset(node,byte)
528 #define Set_Cur_Node_Offset
529 #define Set_Node_Length_To_R(node,len)
530 #define Set_Node_Length(node,len)
531 #define Set_Node_Cur_Length(node)
532 #define Node_Offset(n)
533 #define Node_Length(n)
534 #define Set_Node_Offset_Length(node,offset,len)
535 #define ProgLen(ri) ri->u.proglen
536 #define SetProgLen(ri,x) ri->u.proglen = x
538 #define ProgLen(ri) ri->u.offsets[0]
539 #define SetProgLen(ri,x) ri->u.offsets[0] = x
540 #define Set_Node_Offset_To_R(node,byte) STMT_START { \
542 MJD_OFFSET_DEBUG(("** (%d) offset of node %d is %d.\n", \
543 __LINE__, (int)(node), (int)(byte))); \
545 Perl_croak(aTHX_ "value of node is %d in Offset macro", (int)(node)); \
547 RExC_offsets[2*(node)-1] = (byte); \
552 #define Set_Node_Offset(node,byte) \
553 Set_Node_Offset_To_R((node)-RExC_emit_start, (byte)-RExC_start)
554 #define Set_Cur_Node_Offset Set_Node_Offset(RExC_emit, RExC_parse)
556 #define Set_Node_Length_To_R(node,len) STMT_START { \
558 MJD_OFFSET_DEBUG(("** (%d) size of node %d is %d.\n", \
559 __LINE__, (int)(node), (int)(len))); \
561 Perl_croak(aTHX_ "value of node is %d in Length macro", (int)(node)); \
563 RExC_offsets[2*(node)] = (len); \
568 #define Set_Node_Length(node,len) \
569 Set_Node_Length_To_R((node)-RExC_emit_start, len)
570 #define Set_Cur_Node_Length(len) Set_Node_Length(RExC_emit, len)
571 #define Set_Node_Cur_Length(node) \
572 Set_Node_Length(node, RExC_parse - parse_start)
574 /* Get offsets and lengths */
575 #define Node_Offset(n) (RExC_offsets[2*((n)-RExC_emit_start)-1])
576 #define Node_Length(n) (RExC_offsets[2*((n)-RExC_emit_start)])
578 #define Set_Node_Offset_Length(node,offset,len) STMT_START { \
579 Set_Node_Offset_To_R((node)-RExC_emit_start, (offset)); \
580 Set_Node_Length_To_R((node)-RExC_emit_start, (len)); \
584 #if PERL_ENABLE_EXPERIMENTAL_REGEX_OPTIMISATIONS
585 #define EXPERIMENTAL_INPLACESCAN
586 #endif /*RE_TRACK_PATTERN_OFFSETS*/
588 #define DEBUG_STUDYDATA(str,data,depth) \
589 DEBUG_OPTIMISE_MORE_r(if(data){ \
590 PerlIO_printf(Perl_debug_log, \
591 "%*s" str "Pos:%"IVdf"/%"IVdf \
592 " Flags: 0x%"UVXf" Whilem_c: %"IVdf" Lcp: %"IVdf" %s", \
593 (int)(depth)*2, "", \
594 (IV)((data)->pos_min), \
595 (IV)((data)->pos_delta), \
596 (UV)((data)->flags), \
597 (IV)((data)->whilem_c), \
598 (IV)((data)->last_closep ? *((data)->last_closep) : -1), \
599 is_inf ? "INF " : "" \
601 if ((data)->last_found) \
602 PerlIO_printf(Perl_debug_log, \
603 "Last:'%s' %"IVdf":%"IVdf"/%"IVdf" %sFixed:'%s' @ %"IVdf \
604 " %sFloat: '%s' @ %"IVdf"/%"IVdf"", \
605 SvPVX_const((data)->last_found), \
606 (IV)((data)->last_end), \
607 (IV)((data)->last_start_min), \
608 (IV)((data)->last_start_max), \
609 ((data)->longest && \
610 (data)->longest==&((data)->longest_fixed)) ? "*" : "", \
611 SvPVX_const((data)->longest_fixed), \
612 (IV)((data)->offset_fixed), \
613 ((data)->longest && \
614 (data)->longest==&((data)->longest_float)) ? "*" : "", \
615 SvPVX_const((data)->longest_float), \
616 (IV)((data)->offset_float_min), \
617 (IV)((data)->offset_float_max) \
619 PerlIO_printf(Perl_debug_log,"\n"); \
622 static void clear_re(pTHX_ void *r);
624 /* Mark that we cannot extend a found fixed substring at this point.
625 Update the longest found anchored substring and the longest found
626 floating substrings if needed. */
629 S_scan_commit(pTHX_ const RExC_state_t *pRExC_state, scan_data_t *data, I32 *minlenp, int is_inf)
631 const STRLEN l = CHR_SVLEN(data->last_found);
632 const STRLEN old_l = CHR_SVLEN(*data->longest);
633 GET_RE_DEBUG_FLAGS_DECL;
635 if ((l >= old_l) && ((l > old_l) || (data->flags & SF_BEFORE_EOL))) {
636 SvSetMagicSV(*data->longest, data->last_found);
637 if (*data->longest == data->longest_fixed) {
638 data->offset_fixed = l ? data->last_start_min : data->pos_min;
639 if (data->flags & SF_BEFORE_EOL)
641 |= ((data->flags & SF_BEFORE_EOL) << SF_FIX_SHIFT_EOL);
643 data->flags &= ~SF_FIX_BEFORE_EOL;
644 data->minlen_fixed=minlenp;
645 data->lookbehind_fixed=0;
647 else { /* *data->longest == data->longest_float */
648 data->offset_float_min = l ? data->last_start_min : data->pos_min;
649 data->offset_float_max = (l
650 ? data->last_start_max
651 : data->pos_min + data->pos_delta);
652 if (is_inf || (U32)data->offset_float_max > (U32)I32_MAX)
653 data->offset_float_max = I32_MAX;
654 if (data->flags & SF_BEFORE_EOL)
656 |= ((data->flags & SF_BEFORE_EOL) << SF_FL_SHIFT_EOL);
658 data->flags &= ~SF_FL_BEFORE_EOL;
659 data->minlen_float=minlenp;
660 data->lookbehind_float=0;
663 SvCUR_set(data->last_found, 0);
665 SV * const sv = data->last_found;
666 if (SvUTF8(sv) && SvMAGICAL(sv)) {
667 MAGIC * const mg = mg_find(sv, PERL_MAGIC_utf8);
673 data->flags &= ~SF_BEFORE_EOL;
674 DEBUG_STUDYDATA("commit: ",data,0);
677 /* Can match anything (initialization) */
679 S_cl_anything(const RExC_state_t *pRExC_state, struct regnode_charclass_class *cl)
681 ANYOF_CLASS_ZERO(cl);
682 ANYOF_BITMAP_SETALL(cl);
683 cl->flags = ANYOF_EOS|ANYOF_UNICODE_ALL;
685 cl->flags |= ANYOF_LOCALE;
688 /* Can match anything (initialization) */
690 S_cl_is_anything(const struct regnode_charclass_class *cl)
694 for (value = 0; value <= ANYOF_MAX; value += 2)
695 if (ANYOF_CLASS_TEST(cl, value) && ANYOF_CLASS_TEST(cl, value + 1))
697 if (!(cl->flags & ANYOF_UNICODE_ALL))
699 if (!ANYOF_BITMAP_TESTALLSET((const void*)cl))
704 /* Can match anything (initialization) */
706 S_cl_init(const RExC_state_t *pRExC_state, struct regnode_charclass_class *cl)
708 Zero(cl, 1, struct regnode_charclass_class);
710 cl_anything(pRExC_state, cl);
714 S_cl_init_zero(const RExC_state_t *pRExC_state, struct regnode_charclass_class *cl)
716 Zero(cl, 1, struct regnode_charclass_class);
718 cl_anything(pRExC_state, cl);
720 cl->flags |= ANYOF_LOCALE;
723 /* 'And' a given class with another one. Can create false positives */
724 /* We assume that cl is not inverted */
726 S_cl_and(struct regnode_charclass_class *cl,
727 const struct regnode_charclass_class *and_with)
730 assert(and_with->type == ANYOF);
731 if (!(and_with->flags & ANYOF_CLASS)
732 && !(cl->flags & ANYOF_CLASS)
733 && (and_with->flags & ANYOF_LOCALE) == (cl->flags & ANYOF_LOCALE)
734 && !(and_with->flags & ANYOF_FOLD)
735 && !(cl->flags & ANYOF_FOLD)) {
738 if (and_with->flags & ANYOF_INVERT)
739 for (i = 0; i < ANYOF_BITMAP_SIZE; i++)
740 cl->bitmap[i] &= ~and_with->bitmap[i];
742 for (i = 0; i < ANYOF_BITMAP_SIZE; i++)
743 cl->bitmap[i] &= and_with->bitmap[i];
744 } /* XXXX: logic is complicated otherwise, leave it along for a moment. */
745 if (!(and_with->flags & ANYOF_EOS))
746 cl->flags &= ~ANYOF_EOS;
748 if (cl->flags & ANYOF_UNICODE_ALL && and_with->flags & ANYOF_UNICODE &&
749 !(and_with->flags & ANYOF_INVERT)) {
750 cl->flags &= ~ANYOF_UNICODE_ALL;
751 cl->flags |= ANYOF_UNICODE;
752 ARG_SET(cl, ARG(and_with));
754 if (!(and_with->flags & ANYOF_UNICODE_ALL) &&
755 !(and_with->flags & ANYOF_INVERT))
756 cl->flags &= ~ANYOF_UNICODE_ALL;
757 if (!(and_with->flags & (ANYOF_UNICODE|ANYOF_UNICODE_ALL)) &&
758 !(and_with->flags & ANYOF_INVERT))
759 cl->flags &= ~ANYOF_UNICODE;
762 /* 'OR' a given class with another one. Can create false positives */
763 /* We assume that cl is not inverted */
765 S_cl_or(const RExC_state_t *pRExC_state, struct regnode_charclass_class *cl, const struct regnode_charclass_class *or_with)
767 if (or_with->flags & ANYOF_INVERT) {
769 * (B1 | CL1) | (!B2 & !CL2) = (B1 | !B2 & !CL2) | (CL1 | (!B2 & !CL2))
770 * <= (B1 | !B2) | (CL1 | !CL2)
771 * which is wasteful if CL2 is small, but we ignore CL2:
772 * (B1 | CL1) | (!B2 & !CL2) <= (B1 | CL1) | !B2 = (B1 | !B2) | CL1
773 * XXXX Can we handle case-fold? Unclear:
774 * (OK1(i) | OK1(i')) | !(OK1(i) | OK1(i')) =
775 * (OK1(i) | OK1(i')) | (!OK1(i) & !OK1(i'))
777 if ( (or_with->flags & ANYOF_LOCALE) == (cl->flags & ANYOF_LOCALE)
778 && !(or_with->flags & ANYOF_FOLD)
779 && !(cl->flags & ANYOF_FOLD) ) {
782 for (i = 0; i < ANYOF_BITMAP_SIZE; i++)
783 cl->bitmap[i] |= ~or_with->bitmap[i];
784 } /* XXXX: logic is complicated otherwise */
786 cl_anything(pRExC_state, cl);
789 /* (B1 | CL1) | (B2 | CL2) = (B1 | B2) | (CL1 | CL2)) */
790 if ( (or_with->flags & ANYOF_LOCALE) == (cl->flags & ANYOF_LOCALE)
791 && (!(or_with->flags & ANYOF_FOLD)
792 || (cl->flags & ANYOF_FOLD)) ) {
795 /* OR char bitmap and class bitmap separately */
796 for (i = 0; i < ANYOF_BITMAP_SIZE; i++)
797 cl->bitmap[i] |= or_with->bitmap[i];
798 if (or_with->flags & ANYOF_CLASS) {
799 for (i = 0; i < ANYOF_CLASSBITMAP_SIZE; i++)
800 cl->classflags[i] |= or_with->classflags[i];
801 cl->flags |= ANYOF_CLASS;
804 else { /* XXXX: logic is complicated, leave it along for a moment. */
805 cl_anything(pRExC_state, cl);
808 if (or_with->flags & ANYOF_EOS)
809 cl->flags |= ANYOF_EOS;
811 if (cl->flags & ANYOF_UNICODE && or_with->flags & ANYOF_UNICODE &&
812 ARG(cl) != ARG(or_with)) {
813 cl->flags |= ANYOF_UNICODE_ALL;
814 cl->flags &= ~ANYOF_UNICODE;
816 if (or_with->flags & ANYOF_UNICODE_ALL) {
817 cl->flags |= ANYOF_UNICODE_ALL;
818 cl->flags &= ~ANYOF_UNICODE;
822 #define TRIE_LIST_ITEM(state,idx) (trie->states[state].trans.list)[ idx ]
823 #define TRIE_LIST_CUR(state) ( TRIE_LIST_ITEM( state, 0 ).forid )
824 #define TRIE_LIST_LEN(state) ( TRIE_LIST_ITEM( state, 0 ).newstate )
825 #define TRIE_LIST_USED(idx) ( trie->states[state].trans.list ? (TRIE_LIST_CUR( idx ) - 1) : 0 )
830 dump_trie(trie,widecharmap,revcharmap)
831 dump_trie_interim_list(trie,widecharmap,revcharmap,next_alloc)
832 dump_trie_interim_table(trie,widecharmap,revcharmap,next_alloc)
834 These routines dump out a trie in a somewhat readable format.
835 The _interim_ variants are used for debugging the interim
836 tables that are used to generate the final compressed
837 representation which is what dump_trie expects.
839 Part of the reason for their existance is to provide a form
840 of documentation as to how the different representations function.
845 Dumps the final compressed table form of the trie to Perl_debug_log.
846 Used for debugging make_trie().
850 S_dump_trie(pTHX_ const struct _reg_trie_data *trie, HV *widecharmap,
851 AV *revcharmap, U32 depth)
854 SV *sv=sv_newmortal();
855 int colwidth= widecharmap ? 6 : 4;
856 GET_RE_DEBUG_FLAGS_DECL;
859 PerlIO_printf( Perl_debug_log, "%*sChar : %-6s%-6s%-4s ",
860 (int)depth * 2 + 2,"",
861 "Match","Base","Ofs" );
863 for( state = 0 ; state < trie->uniquecharcount ; state++ ) {
864 SV ** const tmp = av_fetch( revcharmap, state, 0);
866 PerlIO_printf( Perl_debug_log, "%*s",
868 pv_pretty(sv, SvPV_nolen_const(*tmp), SvCUR(*tmp), colwidth,
869 PL_colors[0], PL_colors[1],
870 (SvUTF8(*tmp) ? PERL_PV_ESCAPE_UNI : 0) |
871 PERL_PV_ESCAPE_FIRSTCHAR
876 PerlIO_printf( Perl_debug_log, "\n%*sState|-----------------------",
877 (int)depth * 2 + 2,"");
879 for( state = 0 ; state < trie->uniquecharcount ; state++ )
880 PerlIO_printf( Perl_debug_log, "%.*s", colwidth, "--------");
881 PerlIO_printf( Perl_debug_log, "\n");
883 for( state = 1 ; state < trie->statecount ; state++ ) {
884 const U32 base = trie->states[ state ].trans.base;
886 PerlIO_printf( Perl_debug_log, "%*s#%4"UVXf"|", (int)depth * 2 + 2,"", (UV)state);
888 if ( trie->states[ state ].wordnum ) {
889 PerlIO_printf( Perl_debug_log, " W%4X", trie->states[ state ].wordnum );
891 PerlIO_printf( Perl_debug_log, "%6s", "" );
894 PerlIO_printf( Perl_debug_log, " @%4"UVXf" ", (UV)base );
899 while( ( base + ofs < trie->uniquecharcount ) ||
900 ( base + ofs - trie->uniquecharcount < trie->lasttrans
901 && trie->trans[ base + ofs - trie->uniquecharcount ].check != state))
904 PerlIO_printf( Perl_debug_log, "+%2"UVXf"[ ", (UV)ofs);
906 for ( ofs = 0 ; ofs < trie->uniquecharcount ; ofs++ ) {
907 if ( ( base + ofs >= trie->uniquecharcount ) &&
908 ( base + ofs - trie->uniquecharcount < trie->lasttrans ) &&
909 trie->trans[ base + ofs - trie->uniquecharcount ].check == state )
911 PerlIO_printf( Perl_debug_log, "%*"UVXf,
913 (UV)trie->trans[ base + ofs - trie->uniquecharcount ].next );
915 PerlIO_printf( Perl_debug_log, "%*s",colwidth," ." );
919 PerlIO_printf( Perl_debug_log, "]");
922 PerlIO_printf( Perl_debug_log, "\n" );
926 Dumps a fully constructed but uncompressed trie in list form.
927 List tries normally only are used for construction when the number of
928 possible chars (trie->uniquecharcount) is very high.
929 Used for debugging make_trie().
932 S_dump_trie_interim_list(pTHX_ const struct _reg_trie_data *trie,
933 HV *widecharmap, AV *revcharmap, U32 next_alloc,
937 SV *sv=sv_newmortal();
938 int colwidth= widecharmap ? 6 : 4;
939 GET_RE_DEBUG_FLAGS_DECL;
940 /* print out the table precompression. */
941 PerlIO_printf( Perl_debug_log, "%*sState :Word | Transition Data\n%*s%s",
942 (int)depth * 2 + 2,"", (int)depth * 2 + 2,"",
943 "------:-----+-----------------\n" );
945 for( state=1 ; state < next_alloc ; state ++ ) {
948 PerlIO_printf( Perl_debug_log, "%*s %4"UVXf" :",
949 (int)depth * 2 + 2,"", (UV)state );
950 if ( ! trie->states[ state ].wordnum ) {
951 PerlIO_printf( Perl_debug_log, "%5s| ","");
953 PerlIO_printf( Perl_debug_log, "W%4x| ",
954 trie->states[ state ].wordnum
957 for( charid = 1 ; charid <= TRIE_LIST_USED( state ) ; charid++ ) {
958 SV ** const tmp = av_fetch( revcharmap, TRIE_LIST_ITEM(state,charid).forid, 0);
960 PerlIO_printf( Perl_debug_log, "%*s:%3X=%4"UVXf" | ",
962 pv_pretty(sv, SvPV_nolen_const(*tmp), SvCUR(*tmp), colwidth,
963 PL_colors[0], PL_colors[1],
964 (SvUTF8(*tmp) ? PERL_PV_ESCAPE_UNI : 0) |
965 PERL_PV_ESCAPE_FIRSTCHAR
967 TRIE_LIST_ITEM(state,charid).forid,
968 (UV)TRIE_LIST_ITEM(state,charid).newstate
971 PerlIO_printf(Perl_debug_log, "\n%*s| ",
972 (int)((depth * 2) + 14), "");
975 PerlIO_printf( Perl_debug_log, "\n");
980 Dumps a fully constructed but uncompressed trie in table form.
981 This is the normal DFA style state transition table, with a few
982 twists to facilitate compression later.
983 Used for debugging make_trie().
986 S_dump_trie_interim_table(pTHX_ const struct _reg_trie_data *trie,
987 HV *widecharmap, AV *revcharmap, U32 next_alloc,
992 SV *sv=sv_newmortal();
993 int colwidth= widecharmap ? 6 : 4;
994 GET_RE_DEBUG_FLAGS_DECL;
997 print out the table precompression so that we can do a visual check
998 that they are identical.
1001 PerlIO_printf( Perl_debug_log, "%*sChar : ",(int)depth * 2 + 2,"" );
1003 for( charid = 0 ; charid < trie->uniquecharcount ; charid++ ) {
1004 SV ** const tmp = av_fetch( revcharmap, charid, 0);
1006 PerlIO_printf( Perl_debug_log, "%*s",
1008 pv_pretty(sv, SvPV_nolen_const(*tmp), SvCUR(*tmp), colwidth,
1009 PL_colors[0], PL_colors[1],
1010 (SvUTF8(*tmp) ? PERL_PV_ESCAPE_UNI : 0) |
1011 PERL_PV_ESCAPE_FIRSTCHAR
1017 PerlIO_printf( Perl_debug_log, "\n%*sState+-",(int)depth * 2 + 2,"" );
1019 for( charid=0 ; charid < trie->uniquecharcount ; charid++ ) {
1020 PerlIO_printf( Perl_debug_log, "%.*s", colwidth,"--------");
1023 PerlIO_printf( Perl_debug_log, "\n" );
1025 for( state=1 ; state < next_alloc ; state += trie->uniquecharcount ) {
1027 PerlIO_printf( Perl_debug_log, "%*s%4"UVXf" : ",
1028 (int)depth * 2 + 2,"",
1029 (UV)TRIE_NODENUM( state ) );
1031 for( charid = 0 ; charid < trie->uniquecharcount ; charid++ ) {
1032 UV v=(UV)SAFE_TRIE_NODENUM( trie->trans[ state + charid ].next );
1034 PerlIO_printf( Perl_debug_log, "%*"UVXf, colwidth, v );
1036 PerlIO_printf( Perl_debug_log, "%*s", colwidth, "." );
1038 if ( ! trie->states[ TRIE_NODENUM( state ) ].wordnum ) {
1039 PerlIO_printf( Perl_debug_log, " (%4"UVXf")\n", (UV)trie->trans[ state ].check );
1041 PerlIO_printf( Perl_debug_log, " (%4"UVXf") W%4X\n", (UV)trie->trans[ state ].check,
1042 trie->states[ TRIE_NODENUM( state ) ].wordnum );
1049 /* make_trie(startbranch,first,last,tail,word_count,flags,depth)
1050 startbranch: the first branch in the whole branch sequence
1051 first : start branch of sequence of branch-exact nodes.
1052 May be the same as startbranch
1053 last : Thing following the last branch.
1054 May be the same as tail.
1055 tail : item following the branch sequence
1056 count : words in the sequence
1057 flags : currently the OP() type we will be building one of /EXACT(|F|Fl)/
1058 depth : indent depth
1060 Inplace optimizes a sequence of 2 or more Branch-Exact nodes into a TRIE node.
1062 A trie is an N'ary tree where the branches are determined by digital
1063 decomposition of the key. IE, at the root node you look up the 1st character and
1064 follow that branch repeat until you find the end of the branches. Nodes can be
1065 marked as "accepting" meaning they represent a complete word. Eg:
1069 would convert into the following structure. Numbers represent states, letters
1070 following numbers represent valid transitions on the letter from that state, if
1071 the number is in square brackets it represents an accepting state, otherwise it
1072 will be in parenthesis.
1074 +-h->+-e->[3]-+-r->(8)-+-s->[9]
1078 (1) +-i->(6)-+-s->[7]
1080 +-s->(3)-+-h->(4)-+-e->[5]
1082 Accept Word Mapping: 3=>1 (he),5=>2 (she), 7=>3 (his), 9=>4 (hers)
1084 This shows that when matching against the string 'hers' we will begin at state 1
1085 read 'h' and move to state 2, read 'e' and move to state 3 which is accepting,
1086 then read 'r' and go to state 8 followed by 's' which takes us to state 9 which
1087 is also accepting. Thus we know that we can match both 'he' and 'hers' with a
1088 single traverse. We store a mapping from accepting to state to which word was
1089 matched, and then when we have multiple possibilities we try to complete the
1090 rest of the regex in the order in which they occured in the alternation.
1092 The only prior NFA like behaviour that would be changed by the TRIE support is
1093 the silent ignoring of duplicate alternations which are of the form:
1095 / (DUPE|DUPE) X? (?{ ... }) Y /x
1097 Thus EVAL blocks follwing a trie may be called a different number of times with
1098 and without the optimisation. With the optimisations dupes will be silently
1099 ignored. This inconsistant behaviour of EVAL type nodes is well established as
1100 the following demonstrates:
1102 'words'=~/(word|word|word)(?{ print $1 })[xyz]/
1104 which prints out 'word' three times, but
1106 'words'=~/(word|word|word)(?{ print $1 })S/
1108 which doesnt print it out at all. This is due to other optimisations kicking in.
1110 Example of what happens on a structural level:
1112 The regexp /(ac|ad|ab)+/ will produce the folowing debug output:
1114 1: CURLYM[1] {1,32767}(18)
1125 This would be optimizable with startbranch=5, first=5, last=16, tail=16
1126 and should turn into:
1128 1: CURLYM[1] {1,32767}(18)
1130 [Words:3 Chars Stored:6 Unique Chars:4 States:5 NCP:1]
1138 Cases where tail != last would be like /(?foo|bar)baz/:
1148 which would be optimizable with startbranch=1, first=1, last=7, tail=8
1149 and would end up looking like:
1152 [Words:2 Chars Stored:6 Unique Chars:5 States:7 NCP:1]
1159 d = uvuni_to_utf8_flags(d, uv, 0);
1161 is the recommended Unicode-aware way of saying
1166 #define TRIE_STORE_REVCHAR \
1169 SV *zlopp = newSV(2); \
1170 unsigned char *flrbbbbb = (unsigned char *) SvPVX(zlopp); \
1171 unsigned const char *const kapow = uvuni_to_utf8(flrbbbbb, uvc & 0xFF); \
1172 SvCUR_set(zlopp, kapow - flrbbbbb); \
1175 av_push(revcharmap, zlopp); \
1177 char ooooff = (char)uvc; \
1178 av_push(revcharmap, newSVpvn(&ooooff, 1)); \
1182 #define TRIE_READ_CHAR STMT_START { \
1186 if ( foldlen > 0 ) { \
1187 uvc = utf8n_to_uvuni( scan, UTF8_MAXLEN, &len, uniflags ); \
1192 uvc = utf8n_to_uvuni( (const U8*)uc, UTF8_MAXLEN, &len, uniflags);\
1193 uvc = to_uni_fold( uvc, foldbuf, &foldlen ); \
1194 foldlen -= UNISKIP( uvc ); \
1195 scan = foldbuf + UNISKIP( uvc ); \
1198 uvc = utf8n_to_uvuni( (const U8*)uc, UTF8_MAXLEN, &len, uniflags);\
1208 #define TRIE_LIST_PUSH(state,fid,ns) STMT_START { \
1209 if ( TRIE_LIST_CUR( state ) >=TRIE_LIST_LEN( state ) ) { \
1210 U32 ging = TRIE_LIST_LEN( state ) *= 2; \
1211 Renew( trie->states[ state ].trans.list, ging, reg_trie_trans_le ); \
1213 TRIE_LIST_ITEM( state, TRIE_LIST_CUR( state ) ).forid = fid; \
1214 TRIE_LIST_ITEM( state, TRIE_LIST_CUR( state ) ).newstate = ns; \
1215 TRIE_LIST_CUR( state )++; \
1218 #define TRIE_LIST_NEW(state) STMT_START { \
1219 Newxz( trie->states[ state ].trans.list, \
1220 4, reg_trie_trans_le ); \
1221 TRIE_LIST_CUR( state ) = 1; \
1222 TRIE_LIST_LEN( state ) = 4; \
1225 #define TRIE_HANDLE_WORD(state) STMT_START { \
1226 U16 dupe= trie->states[ state ].wordnum; \
1227 regnode * const noper_next = regnext( noper ); \
1229 if (trie->wordlen) \
1230 trie->wordlen[ curword ] = wordlen; \
1232 /* store the word for dumping */ \
1234 if (OP(noper) != NOTHING) \
1235 tmp = newSVpvn_utf8(STRING(noper), STR_LEN(noper), UTF); \
1237 tmp = newSVpvn_utf8( "", 0, UTF ); \
1238 av_push( trie_words, tmp ); \
1243 if ( noper_next < tail ) { \
1245 trie->jump = (U16 *) PerlMemShared_calloc( word_count + 1, sizeof(U16) ); \
1246 trie->jump[curword] = (U16)(noper_next - convert); \
1248 jumper = noper_next; \
1250 nextbranch= regnext(cur); \
1254 /* So it's a dupe. This means we need to maintain a */\
1255 /* linked-list from the first to the next. */\
1256 /* we only allocate the nextword buffer when there */\
1257 /* a dupe, so first time we have to do the allocation */\
1258 if (!trie->nextword) \
1259 trie->nextword = (U16 *) \
1260 PerlMemShared_calloc( word_count + 1, sizeof(U16)); \
1261 while ( trie->nextword[dupe] ) \
1262 dupe= trie->nextword[dupe]; \
1263 trie->nextword[dupe]= curword; \
1265 /* we haven't inserted this word yet. */ \
1266 trie->states[ state ].wordnum = curword; \
1271 #define TRIE_TRANS_STATE(state,base,ucharcount,charid,special) \
1272 ( ( base + charid >= ucharcount \
1273 && base + charid < ubound \
1274 && state == trie->trans[ base - ucharcount + charid ].check \
1275 && trie->trans[ base - ucharcount + charid ].next ) \
1276 ? trie->trans[ base - ucharcount + charid ].next \
1277 : ( state==1 ? special : 0 ) \
1281 #define MADE_JUMP_TRIE 2
1282 #define MADE_EXACT_TRIE 4
1285 S_make_trie(pTHX_ RExC_state_t *pRExC_state, regnode *startbranch, regnode *first, regnode *last, regnode *tail, U32 word_count, U32 flags, U32 depth)
1288 /* first pass, loop through and scan words */
1289 reg_trie_data *trie;
1290 HV *widecharmap = NULL;
1291 AV *revcharmap = newAV();
1293 const U32 uniflags = UTF8_ALLOW_DEFAULT;
1298 regnode *jumper = NULL;
1299 regnode *nextbranch = NULL;
1300 regnode *convert = NULL;
1301 /* we just use folder as a flag in utf8 */
1302 const U8 * const folder = ( flags == EXACTF
1304 : ( flags == EXACTFL
1311 const U32 data_slot = add_data( pRExC_state, 4, "tuuu" );
1312 AV *trie_words = NULL;
1313 /* along with revcharmap, this only used during construction but both are
1314 * useful during debugging so we store them in the struct when debugging.
1317 const U32 data_slot = add_data( pRExC_state, 2, "tu" );
1318 STRLEN trie_charcount=0;
1320 SV *re_trie_maxbuff;
1321 GET_RE_DEBUG_FLAGS_DECL;
1323 PERL_UNUSED_ARG(depth);
1326 trie = (reg_trie_data *) PerlMemShared_calloc( 1, sizeof(reg_trie_data) );
1328 trie->startstate = 1;
1329 trie->wordcount = word_count;
1330 RExC_rxi->data->data[ data_slot ] = (void*)trie;
1331 trie->charmap = (U16 *) PerlMemShared_calloc( 256, sizeof(U16) );
1332 if (!(UTF && folder))
1333 trie->bitmap = (char *) PerlMemShared_calloc( ANYOF_BITMAP_SIZE, 1 );
1335 trie_words = newAV();
1338 re_trie_maxbuff = get_sv(RE_TRIE_MAXBUF_NAME, 1);
1339 if (!SvIOK(re_trie_maxbuff)) {
1340 sv_setiv(re_trie_maxbuff, RE_TRIE_MAXBUF_INIT);
1343 PerlIO_printf( Perl_debug_log,
1344 "%*smake_trie start==%d, first==%d, last==%d, tail==%d depth=%d\n",
1345 (int)depth * 2 + 2, "",
1346 REG_NODE_NUM(startbranch),REG_NODE_NUM(first),
1347 REG_NODE_NUM(last), REG_NODE_NUM(tail),
1351 /* Find the node we are going to overwrite */
1352 if ( first == startbranch && OP( last ) != BRANCH ) {
1353 /* whole branch chain */
1356 /* branch sub-chain */
1357 convert = NEXTOPER( first );
1360 /* -- First loop and Setup --
1362 We first traverse the branches and scan each word to determine if it
1363 contains widechars, and how many unique chars there are, this is
1364 important as we have to build a table with at least as many columns as we
1367 We use an array of integers to represent the character codes 0..255
1368 (trie->charmap) and we use a an HV* to store Unicode characters. We use the
1369 native representation of the character value as the key and IV's for the
1372 *TODO* If we keep track of how many times each character is used we can
1373 remap the columns so that the table compression later on is more
1374 efficient in terms of memory by ensuring most common value is in the
1375 middle and the least common are on the outside. IMO this would be better
1376 than a most to least common mapping as theres a decent chance the most
1377 common letter will share a node with the least common, meaning the node
1378 will not be compressable. With a middle is most common approach the worst
1379 case is when we have the least common nodes twice.
1383 for ( cur = first ; cur < last ; cur = regnext( cur ) ) {
1384 regnode * const noper = NEXTOPER( cur );
1385 const U8 *uc = (U8*)STRING( noper );
1386 const U8 * const e = uc + STR_LEN( noper );
1388 U8 foldbuf[ UTF8_MAXBYTES_CASE + 1 ];
1389 const U8 *scan = (U8*)NULL;
1390 U32 wordlen = 0; /* required init */
1392 bool set_bit = trie->bitmap ? 1 : 0; /*store the first char in the bitmap?*/
1394 if (OP(noper) == NOTHING) {
1398 if ( set_bit ) /* bitmap only alloced when !(UTF&&Folding) */
1399 TRIE_BITMAP_SET(trie,*uc); /* store the raw first byte
1400 regardless of encoding */
1402 for ( ; uc < e ; uc += len ) {
1403 TRIE_CHARCOUNT(trie)++;
1407 if ( !trie->charmap[ uvc ] ) {
1408 trie->charmap[ uvc ]=( ++trie->uniquecharcount );
1410 trie->charmap[ folder[ uvc ] ] = trie->charmap[ uvc ];
1414 /* store the codepoint in the bitmap, and if its ascii
1415 also store its folded equivelent. */
1416 TRIE_BITMAP_SET(trie,uvc);
1418 /* store the folded codepoint */
1419 if ( folder ) TRIE_BITMAP_SET(trie,folder[ uvc ]);
1422 /* store first byte of utf8 representation of
1423 codepoints in the 127 < uvc < 256 range */
1424 if (127 < uvc && uvc < 192) {
1425 TRIE_BITMAP_SET(trie,194);
1426 } else if (191 < uvc ) {
1427 TRIE_BITMAP_SET(trie,195);
1428 /* && uvc < 256 -- we know uvc is < 256 already */
1431 set_bit = 0; /* We've done our bit :-) */
1436 widecharmap = newHV();
1438 svpp = hv_fetch( widecharmap, (char*)&uvc, sizeof( UV ), 1 );
1441 Perl_croak( aTHX_ "error creating/fetching widecharmap entry for 0x%"UVXf, uvc );
1443 if ( !SvTRUE( *svpp ) ) {
1444 sv_setiv( *svpp, ++trie->uniquecharcount );
1449 if( cur == first ) {
1452 } else if (chars < trie->minlen) {
1454 } else if (chars > trie->maxlen) {
1458 } /* end first pass */
1459 DEBUG_TRIE_COMPILE_r(
1460 PerlIO_printf( Perl_debug_log, "%*sTRIE(%s): W:%d C:%d Uq:%d Min:%d Max:%d\n",
1461 (int)depth * 2 + 2,"",
1462 ( widecharmap ? "UTF8" : "NATIVE" ), (int)word_count,
1463 (int)TRIE_CHARCOUNT(trie), trie->uniquecharcount,
1464 (int)trie->minlen, (int)trie->maxlen )
1466 trie->wordlen = (U32 *) PerlMemShared_calloc( word_count, sizeof(U32) );
1469 We now know what we are dealing with in terms of unique chars and
1470 string sizes so we can calculate how much memory a naive
1471 representation using a flat table will take. If it's over a reasonable
1472 limit (as specified by ${^RE_TRIE_MAXBUF}) we use a more memory
1473 conservative but potentially much slower representation using an array
1476 At the end we convert both representations into the same compressed
1477 form that will be used in regexec.c for matching with. The latter
1478 is a form that cannot be used to construct with but has memory
1479 properties similar to the list form and access properties similar
1480 to the table form making it both suitable for fast searches and
1481 small enough that its feasable to store for the duration of a program.
1483 See the comment in the code where the compressed table is produced
1484 inplace from the flat tabe representation for an explanation of how
1485 the compression works.
1490 if ( (IV)( ( TRIE_CHARCOUNT(trie) + 1 ) * trie->uniquecharcount + 1) > SvIV(re_trie_maxbuff) ) {
1492 Second Pass -- Array Of Lists Representation
1494 Each state will be represented by a list of charid:state records
1495 (reg_trie_trans_le) the first such element holds the CUR and LEN
1496 points of the allocated array. (See defines above).
1498 We build the initial structure using the lists, and then convert
1499 it into the compressed table form which allows faster lookups
1500 (but cant be modified once converted).
1503 STRLEN transcount = 1;
1505 DEBUG_TRIE_COMPILE_MORE_r( PerlIO_printf( Perl_debug_log,
1506 "%*sCompiling trie using list compiler\n",
1507 (int)depth * 2 + 2, ""));
1509 trie->states = (reg_trie_state *)
1510 PerlMemShared_calloc( TRIE_CHARCOUNT(trie) + 2,
1511 sizeof(reg_trie_state) );
1515 for ( cur = first ; cur < last ; cur = regnext( cur ) ) {
1517 regnode * const noper = NEXTOPER( cur );
1518 U8 *uc = (U8*)STRING( noper );
1519 const U8 * const e = uc + STR_LEN( noper );
1520 U32 state = 1; /* required init */
1521 U16 charid = 0; /* sanity init */
1522 U8 *scan = (U8*)NULL; /* sanity init */
1523 STRLEN foldlen = 0; /* required init */
1524 U32 wordlen = 0; /* required init */
1525 U8 foldbuf[ UTF8_MAXBYTES_CASE + 1 ];
1527 if (OP(noper) != NOTHING) {
1528 for ( ; uc < e ; uc += len ) {
1533 charid = trie->charmap[ uvc ];
1535 SV** const svpp = hv_fetch( widecharmap, (char*)&uvc, sizeof( UV ), 0);
1539 charid=(U16)SvIV( *svpp );
1542 /* charid is now 0 if we dont know the char read, or nonzero if we do */
1549 if ( !trie->states[ state ].trans.list ) {
1550 TRIE_LIST_NEW( state );
1552 for ( check = 1; check <= TRIE_LIST_USED( state ); check++ ) {
1553 if ( TRIE_LIST_ITEM( state, check ).forid == charid ) {
1554 newstate = TRIE_LIST_ITEM( state, check ).newstate;
1559 newstate = next_alloc++;
1560 TRIE_LIST_PUSH( state, charid, newstate );
1565 Perl_croak( aTHX_ "panic! In trie construction, no char mapping for %"IVdf, uvc );
1569 TRIE_HANDLE_WORD(state);
1571 } /* end second pass */
1573 /* next alloc is the NEXT state to be allocated */
1574 trie->statecount = next_alloc;
1575 trie->states = (reg_trie_state *)
1576 PerlMemShared_realloc( trie->states,
1578 * sizeof(reg_trie_state) );
1580 /* and now dump it out before we compress it */
1581 DEBUG_TRIE_COMPILE_MORE_r(dump_trie_interim_list(trie, widecharmap,
1582 revcharmap, next_alloc,
1586 trie->trans = (reg_trie_trans *)
1587 PerlMemShared_calloc( transcount, sizeof(reg_trie_trans) );
1594 for( state=1 ; state < next_alloc ; state ++ ) {
1598 DEBUG_TRIE_COMPILE_MORE_r(
1599 PerlIO_printf( Perl_debug_log, "tp: %d zp: %d ",tp,zp)
1603 if (trie->states[state].trans.list) {
1604 U16 minid=TRIE_LIST_ITEM( state, 1).forid;
1608 for( idx = 2 ; idx <= TRIE_LIST_USED( state ) ; idx++ ) {
1609 const U16 forid = TRIE_LIST_ITEM( state, idx).forid;
1610 if ( forid < minid ) {
1612 } else if ( forid > maxid ) {
1616 if ( transcount < tp + maxid - minid + 1) {
1618 trie->trans = (reg_trie_trans *)
1619 PerlMemShared_realloc( trie->trans,
1621 * sizeof(reg_trie_trans) );
1622 Zero( trie->trans + (transcount / 2), transcount / 2 , reg_trie_trans );
1624 base = trie->uniquecharcount + tp - minid;
1625 if ( maxid == minid ) {
1627 for ( ; zp < tp ; zp++ ) {
1628 if ( ! trie->trans[ zp ].next ) {
1629 base = trie->uniquecharcount + zp - minid;
1630 trie->trans[ zp ].next = TRIE_LIST_ITEM( state, 1).newstate;
1631 trie->trans[ zp ].check = state;
1637 trie->trans[ tp ].next = TRIE_LIST_ITEM( state, 1).newstate;
1638 trie->trans[ tp ].check = state;
1643 for ( idx=1; idx <= TRIE_LIST_USED( state ) ; idx++ ) {
1644 const U32 tid = base - trie->uniquecharcount + TRIE_LIST_ITEM( state, idx ).forid;
1645 trie->trans[ tid ].next = TRIE_LIST_ITEM( state, idx ).newstate;
1646 trie->trans[ tid ].check = state;
1648 tp += ( maxid - minid + 1 );
1650 Safefree(trie->states[ state ].trans.list);
1653 DEBUG_TRIE_COMPILE_MORE_r(
1654 PerlIO_printf( Perl_debug_log, " base: %d\n",base);
1657 trie->states[ state ].trans.base=base;
1659 trie->lasttrans = tp + 1;
1663 Second Pass -- Flat Table Representation.
1665 we dont use the 0 slot of either trans[] or states[] so we add 1 to each.
1666 We know that we will need Charcount+1 trans at most to store the data
1667 (one row per char at worst case) So we preallocate both structures
1668 assuming worst case.
1670 We then construct the trie using only the .next slots of the entry
1673 We use the .check field of the first entry of the node temporarily to
1674 make compression both faster and easier by keeping track of how many non
1675 zero fields are in the node.
1677 Since trans are numbered from 1 any 0 pointer in the table is a FAIL
1680 There are two terms at use here: state as a TRIE_NODEIDX() which is a
1681 number representing the first entry of the node, and state as a
1682 TRIE_NODENUM() which is the trans number. state 1 is TRIE_NODEIDX(1) and
1683 TRIE_NODENUM(1), state 2 is TRIE_NODEIDX(2) and TRIE_NODENUM(3) if there
1684 are 2 entrys per node. eg:
1692 The table is internally in the right hand, idx form. However as we also
1693 have to deal with the states array which is indexed by nodenum we have to
1694 use TRIE_NODENUM() to convert.
1697 DEBUG_TRIE_COMPILE_MORE_r( PerlIO_printf( Perl_debug_log,
1698 "%*sCompiling trie using table compiler\n",
1699 (int)depth * 2 + 2, ""));
1701 trie->trans = (reg_trie_trans *)
1702 PerlMemShared_calloc( ( TRIE_CHARCOUNT(trie) + 1 )
1703 * trie->uniquecharcount + 1,
1704 sizeof(reg_trie_trans) );
1705 trie->states = (reg_trie_state *)
1706 PerlMemShared_calloc( TRIE_CHARCOUNT(trie) + 2,
1707 sizeof(reg_trie_state) );
1708 next_alloc = trie->uniquecharcount + 1;
1711 for ( cur = first ; cur < last ; cur = regnext( cur ) ) {
1713 regnode * const noper = NEXTOPER( cur );
1714 const U8 *uc = (U8*)STRING( noper );
1715 const U8 * const e = uc + STR_LEN( noper );
1717 U32 state = 1; /* required init */
1719 U16 charid = 0; /* sanity init */
1720 U32 accept_state = 0; /* sanity init */
1721 U8 *scan = (U8*)NULL; /* sanity init */
1723 STRLEN foldlen = 0; /* required init */
1724 U32 wordlen = 0; /* required init */
1725 U8 foldbuf[ UTF8_MAXBYTES_CASE + 1 ];
1727 if ( OP(noper) != NOTHING ) {
1728 for ( ; uc < e ; uc += len ) {
1733 charid = trie->charmap[ uvc ];
1735 SV* const * const svpp = hv_fetch( widecharmap, (char*)&uvc, sizeof( UV ), 0);
1736 charid = svpp ? (U16)SvIV(*svpp) : 0;
1740 if ( !trie->trans[ state + charid ].next ) {
1741 trie->trans[ state + charid ].next = next_alloc;
1742 trie->trans[ state ].check++;
1743 next_alloc += trie->uniquecharcount;
1745 state = trie->trans[ state + charid ].next;
1747 Perl_croak( aTHX_ "panic! In trie construction, no char mapping for %"IVdf, uvc );
1749 /* charid is now 0 if we dont know the char read, or nonzero if we do */
1752 accept_state = TRIE_NODENUM( state );
1753 TRIE_HANDLE_WORD(accept_state);
1755 } /* end second pass */
1757 /* and now dump it out before we compress it */
1758 DEBUG_TRIE_COMPILE_MORE_r(dump_trie_interim_table(trie, widecharmap,
1760 next_alloc, depth+1));
1764 * Inplace compress the table.*
1766 For sparse data sets the table constructed by the trie algorithm will
1767 be mostly 0/FAIL transitions or to put it another way mostly empty.
1768 (Note that leaf nodes will not contain any transitions.)
1770 This algorithm compresses the tables by eliminating most such
1771 transitions, at the cost of a modest bit of extra work during lookup:
1773 - Each states[] entry contains a .base field which indicates the
1774 index in the state[] array wheres its transition data is stored.
1776 - If .base is 0 there are no valid transitions from that node.
1778 - If .base is nonzero then charid is added to it to find an entry in
1781 -If trans[states[state].base+charid].check!=state then the
1782 transition is taken to be a 0/Fail transition. Thus if there are fail
1783 transitions at the front of the node then the .base offset will point
1784 somewhere inside the previous nodes data (or maybe even into a node
1785 even earlier), but the .check field determines if the transition is
1789 The following process inplace converts the table to the compressed
1790 table: We first do not compress the root node 1,and mark its all its
1791 .check pointers as 1 and set its .base pointer as 1 as well. This
1792 allows to do a DFA construction from the compressed table later, and
1793 ensures that any .base pointers we calculate later are greater than
1796 - We set 'pos' to indicate the first entry of the second node.
1798 - We then iterate over the columns of the node, finding the first and
1799 last used entry at l and m. We then copy l..m into pos..(pos+m-l),
1800 and set the .check pointers accordingly, and advance pos
1801 appropriately and repreat for the next node. Note that when we copy
1802 the next pointers we have to convert them from the original
1803 NODEIDX form to NODENUM form as the former is not valid post
1806 - If a node has no transitions used we mark its base as 0 and do not
1807 advance the pos pointer.
1809 - If a node only has one transition we use a second pointer into the
1810 structure to fill in allocated fail transitions from other states.
1811 This pointer is independent of the main pointer and scans forward
1812 looking for null transitions that are allocated to a state. When it
1813 finds one it writes the single transition into the "hole". If the
1814 pointer doesnt find one the single transition is appended as normal.
1816 - Once compressed we can Renew/realloc the structures to release the
1819 See "Table-Compression Methods" in sec 3.9 of the Red Dragon,
1820 specifically Fig 3.47 and the associated pseudocode.
1824 const U32 laststate = TRIE_NODENUM( next_alloc );
1827 trie->statecount = laststate;
1829 for ( state = 1 ; state < laststate ; state++ ) {
1831 const U32 stateidx = TRIE_NODEIDX( state );
1832 const U32 o_used = trie->trans[ stateidx ].check;
1833 U32 used = trie->trans[ stateidx ].check;
1834 trie->trans[ stateidx ].check = 0;
1836 for ( charid = 0 ; used && charid < trie->uniquecharcount ; charid++ ) {
1837 if ( flag || trie->trans[ stateidx + charid ].next ) {
1838 if ( trie->trans[ stateidx + charid ].next ) {
1840 for ( ; zp < pos ; zp++ ) {
1841 if ( ! trie->trans[ zp ].next ) {
1845 trie->states[ state ].trans.base = zp + trie->uniquecharcount - charid ;
1846 trie->trans[ zp ].next = SAFE_TRIE_NODENUM( trie->trans[ stateidx + charid ].next );
1847 trie->trans[ zp ].check = state;
1848 if ( ++zp > pos ) pos = zp;
1855 trie->states[ state ].trans.base = pos + trie->uniquecharcount - charid ;
1857 trie->trans[ pos ].next = SAFE_TRIE_NODENUM( trie->trans[ stateidx + charid ].next );
1858 trie->trans[ pos ].check = state;
1863 trie->lasttrans = pos + 1;
1864 trie->states = (reg_trie_state *)
1865 PerlMemShared_realloc( trie->states, laststate
1866 * sizeof(reg_trie_state) );
1867 DEBUG_TRIE_COMPILE_MORE_r(
1868 PerlIO_printf( Perl_debug_log,
1869 "%*sAlloc: %d Orig: %"IVdf" elements, Final:%"IVdf". Savings of %%%5.2f\n",
1870 (int)depth * 2 + 2,"",
1871 (int)( ( TRIE_CHARCOUNT(trie) + 1 ) * trie->uniquecharcount + 1 ),
1874 ( ( next_alloc - pos ) * 100 ) / (double)next_alloc );
1877 } /* end table compress */
1879 DEBUG_TRIE_COMPILE_MORE_r(
1880 PerlIO_printf(Perl_debug_log, "%*sStatecount:%"UVxf" Lasttrans:%"UVxf"\n",
1881 (int)depth * 2 + 2, "",
1882 (UV)trie->statecount,
1883 (UV)trie->lasttrans)
1885 /* resize the trans array to remove unused space */
1886 trie->trans = (reg_trie_trans *)
1887 PerlMemShared_realloc( trie->trans, trie->lasttrans
1888 * sizeof(reg_trie_trans) );
1890 /* and now dump out the compressed format */
1891 DEBUG_TRIE_COMPILE_r(dump_trie(trie, widecharmap, revcharmap, depth+1));
1893 { /* Modify the program and insert the new TRIE node*/
1894 U8 nodetype =(U8)(flags & 0xFF);
1898 regnode *optimize = NULL;
1899 #ifdef RE_TRACK_PATTERN_OFFSETS
1902 U32 mjd_nodelen = 0;
1903 #endif /* RE_TRACK_PATTERN_OFFSETS */
1904 #endif /* DEBUGGING */
1906 This means we convert either the first branch or the first Exact,
1907 depending on whether the thing following (in 'last') is a branch
1908 or not and whther first is the startbranch (ie is it a sub part of
1909 the alternation or is it the whole thing.)
1910 Assuming its a sub part we conver the EXACT otherwise we convert
1911 the whole branch sequence, including the first.
1913 /* Find the node we are going to overwrite */
1914 if ( first != startbranch || OP( last ) == BRANCH ) {
1915 /* branch sub-chain */
1916 NEXT_OFF( first ) = (U16)(last - first);
1917 #ifdef RE_TRACK_PATTERN_OFFSETS
1919 mjd_offset= Node_Offset((convert));
1920 mjd_nodelen= Node_Length((convert));
1923 /* whole branch chain */
1925 #ifdef RE_TRACK_PATTERN_OFFSETS
1928 const regnode *nop = NEXTOPER( convert );
1929 mjd_offset= Node_Offset((nop));
1930 mjd_nodelen= Node_Length((nop));
1934 PerlIO_printf(Perl_debug_log, "%*sMJD offset:%"UVuf" MJD length:%"UVuf"\n",
1935 (int)depth * 2 + 2, "",
1936 (UV)mjd_offset, (UV)mjd_nodelen)
1939 /* But first we check to see if there is a common prefix we can
1940 split out as an EXACT and put in front of the TRIE node. */
1941 trie->startstate= 1;
1942 if ( trie->bitmap && !widecharmap && !trie->jump ) {
1944 for ( state = 1 ; state < trie->statecount-1 ; state++ ) {
1948 const U32 base = trie->states[ state ].trans.base;
1950 if ( trie->states[state].wordnum )
1953 for ( ofs = 0 ; ofs < trie->uniquecharcount ; ofs++ ) {
1954 if ( ( base + ofs >= trie->uniquecharcount ) &&
1955 ( base + ofs - trie->uniquecharcount < trie->lasttrans ) &&
1956 trie->trans[ base + ofs - trie->uniquecharcount ].check == state )
1958 if ( ++count > 1 ) {
1959 SV **tmp = av_fetch( revcharmap, ofs, 0);
1960 const U8 *ch = (U8*)SvPV_nolen_const( *tmp );
1961 if ( state == 1 ) break;
1963 Zero(trie->bitmap, ANYOF_BITMAP_SIZE, char);
1965 PerlIO_printf(Perl_debug_log,
1966 "%*sNew Start State=%"UVuf" Class: [",
1967 (int)depth * 2 + 2, "",
1970 SV ** const tmp = av_fetch( revcharmap, idx, 0);
1971 const U8 * const ch = (U8*)SvPV_nolen_const( *tmp );
1973 TRIE_BITMAP_SET(trie,*ch);
1975 TRIE_BITMAP_SET(trie, folder[ *ch ]);
1977 PerlIO_printf(Perl_debug_log, (char*)ch)
1981 TRIE_BITMAP_SET(trie,*ch);
1983 TRIE_BITMAP_SET(trie,folder[ *ch ]);
1984 DEBUG_OPTIMISE_r(PerlIO_printf( Perl_debug_log,"%s", ch));
1990 SV **tmp = av_fetch( revcharmap, idx, 0);
1992 char *ch = SvPV( *tmp, len );
1994 SV *sv=sv_newmortal();
1995 PerlIO_printf( Perl_debug_log,
1996 "%*sPrefix State: %"UVuf" Idx:%"UVuf" Char='%s'\n",
1997 (int)depth * 2 + 2, "",
1999 pv_pretty(sv, SvPV_nolen_const(*tmp), SvCUR(*tmp), 6,
2000 PL_colors[0], PL_colors[1],
2001 (SvUTF8(*tmp) ? PERL_PV_ESCAPE_UNI : 0) |
2002 PERL_PV_ESCAPE_FIRSTCHAR
2007 OP( convert ) = nodetype;
2008 str=STRING(convert);
2011 STR_LEN(convert) += len;
2017 DEBUG_OPTIMISE_r(PerlIO_printf( Perl_debug_log,"]\n"));
2023 regnode *n = convert+NODE_SZ_STR(convert);
2024 NEXT_OFF(convert) = NODE_SZ_STR(convert);
2025 trie->startstate = state;
2026 trie->minlen -= (state - 1);
2027 trie->maxlen -= (state - 1);
2029 /* At least the UNICOS C compiler choked on this
2030 * being argument to DEBUG_r(), so let's just have
2033 #ifdef PERL_EXT_RE_BUILD
2039 regnode *fix = convert;
2040 U32 word = trie->wordcount;
2042 Set_Node_Offset_Length(convert, mjd_offset, state - 1);
2043 while( ++fix < n ) {
2044 Set_Node_Offset_Length(fix, 0, 0);
2047 SV ** const tmp = av_fetch( trie_words, word, 0 );
2049 if ( STR_LEN(convert) <= SvCUR(*tmp) )
2050 sv_chop(*tmp, SvPV_nolen(*tmp) + STR_LEN(convert));
2052 sv_chop(*tmp, SvPV_nolen(*tmp) + SvCUR(*tmp));
2060 NEXT_OFF(convert) = (U16)(tail - convert);
2061 DEBUG_r(optimize= n);
2067 if ( trie->maxlen ) {
2068 NEXT_OFF( convert ) = (U16)(tail - convert);
2069 ARG_SET( convert, data_slot );
2070 /* Store the offset to the first unabsorbed branch in
2071 jump[0], which is otherwise unused by the jump logic.
2072 We use this when dumping a trie and during optimisation. */
2074 trie->jump[0] = (U16)(nextbranch - convert);
2077 if ( !trie->states[trie->startstate].wordnum && trie->bitmap &&
2078 ( (char *)jumper - (char *)convert) >= (int)sizeof(struct regnode_charclass) )
2080 OP( convert ) = TRIEC;
2081 Copy(trie->bitmap, ((struct regnode_charclass *)convert)->bitmap, ANYOF_BITMAP_SIZE, char);
2082 PerlMemShared_free(trie->bitmap);
2085 OP( convert ) = TRIE;
2087 /* store the type in the flags */
2088 convert->flags = nodetype;
2092 + regarglen[ OP( convert ) ];
2094 /* XXX We really should free up the resource in trie now,
2095 as we won't use them - (which resources?) dmq */
2097 /* needed for dumping*/
2098 DEBUG_r(if (optimize) {
2099 regnode *opt = convert;
2101 while ( ++opt < optimize) {
2102 Set_Node_Offset_Length(opt,0,0);
2105 Try to clean up some of the debris left after the
2108 while( optimize < jumper ) {
2109 mjd_nodelen += Node_Length((optimize));
2110 OP( optimize ) = OPTIMIZED;
2111 Set_Node_Offset_Length(optimize,0,0);
2114 Set_Node_Offset_Length(convert,mjd_offset,mjd_nodelen);
2116 } /* end node insert */
2117 RExC_rxi->data->data[ data_slot + 1 ] = (void*)widecharmap;
2119 RExC_rxi->data->data[ data_slot + TRIE_WORDS_OFFSET ] = (void*)trie_words;
2120 RExC_rxi->data->data[ data_slot + 3 ] = (void*)revcharmap;
2122 SvREFCNT_dec(revcharmap);
2126 : trie->startstate>1
2132 S_make_trie_failtable(pTHX_ RExC_state_t *pRExC_state, regnode *source, regnode *stclass, U32 depth)
2134 /* The Trie is constructed and compressed now so we can build a fail array now if its needed
2136 This is basically the Aho-Corasick algorithm. Its from exercise 3.31 and 3.32 in the
2137 "Red Dragon" -- Compilers, principles, techniques, and tools. Aho, Sethi, Ullman 1985/88
2140 We find the fail state for each state in the trie, this state is the longest proper
2141 suffix of the current states 'word' that is also a proper prefix of another word in our
2142 trie. State 1 represents the word '' and is the thus the default fail state. This allows
2143 the DFA not to have to restart after its tried and failed a word at a given point, it
2144 simply continues as though it had been matching the other word in the first place.
2146 'abcdgu'=~/abcdefg|cdgu/
2147 When we get to 'd' we are still matching the first word, we would encounter 'g' which would
2148 fail, which would bring use to the state representing 'd' in the second word where we would
2149 try 'g' and succeed, prodceding to match 'cdgu'.
2151 /* add a fail transition */
2152 const U32 trie_offset = ARG(source);
2153 reg_trie_data *trie=(reg_trie_data *)RExC_rxi->data->data[trie_offset];
2155 const U32 ucharcount = trie->uniquecharcount;
2156 const U32 numstates = trie->statecount;
2157 const U32 ubound = trie->lasttrans + ucharcount;
2161 U32 base = trie->states[ 1 ].trans.base;
2164 const U32 data_slot = add_data( pRExC_state, 1, "T" );
2165 GET_RE_DEBUG_FLAGS_DECL;
2167 PERL_UNUSED_ARG(depth);
2171 ARG_SET( stclass, data_slot );
2172 aho = (reg_ac_data *) PerlMemShared_calloc( 1, sizeof(reg_ac_data) );
2173 RExC_rxi->data->data[ data_slot ] = (void*)aho;
2174 aho->trie=trie_offset;
2175 aho->states=(reg_trie_state *)PerlMemShared_malloc( numstates * sizeof(reg_trie_state) );
2176 Copy( trie->states, aho->states, numstates, reg_trie_state );
2177 Newxz( q, numstates, U32);
2178 aho->fail = (U32 *) PerlMemShared_calloc( numstates, sizeof(U32) );
2181 /* initialize fail[0..1] to be 1 so that we always have
2182 a valid final fail state */
2183 fail[ 0 ] = fail[ 1 ] = 1;
2185 for ( charid = 0; charid < ucharcount ; charid++ ) {
2186 const U32 newstate = TRIE_TRANS_STATE( 1, base, ucharcount, charid, 0 );
2188 q[ q_write ] = newstate;
2189 /* set to point at the root */
2190 fail[ q[ q_write++ ] ]=1;
2193 while ( q_read < q_write) {
2194 const U32 cur = q[ q_read++ % numstates ];
2195 base = trie->states[ cur ].trans.base;
2197 for ( charid = 0 ; charid < ucharcount ; charid++ ) {
2198 const U32 ch_state = TRIE_TRANS_STATE( cur, base, ucharcount, charid, 1 );
2200 U32 fail_state = cur;
2203 fail_state = fail[ fail_state ];
2204 fail_base = aho->states[ fail_state ].trans.base;
2205 } while ( !TRIE_TRANS_STATE( fail_state, fail_base, ucharcount, charid, 1 ) );
2207 fail_state = TRIE_TRANS_STATE( fail_state, fail_base, ucharcount, charid, 1 );
2208 fail[ ch_state ] = fail_state;
2209 if ( !aho->states[ ch_state ].wordnum && aho->states[ fail_state ].wordnum )
2211 aho->states[ ch_state ].wordnum = aho->states[ fail_state ].wordnum;
2213 q[ q_write++ % numstates] = ch_state;
2217 /* restore fail[0..1] to 0 so that we "fall out" of the AC loop
2218 when we fail in state 1, this allows us to use the
2219 charclass scan to find a valid start char. This is based on the principle
2220 that theres a good chance the string being searched contains lots of stuff
2221 that cant be a start char.
2223 fail[ 0 ] = fail[ 1 ] = 0;
2224 DEBUG_TRIE_COMPILE_r({
2225 PerlIO_printf(Perl_debug_log,
2226 "%*sStclass Failtable (%"UVuf" states): 0",
2227 (int)(depth * 2), "", (UV)numstates
2229 for( q_read=1; q_read<numstates; q_read++ ) {
2230 PerlIO_printf(Perl_debug_log, ", %"UVuf, (UV)fail[q_read]);
2232 PerlIO_printf(Perl_debug_log, "\n");
2235 /*RExC_seen |= REG_SEEN_TRIEDFA;*/
2240 * There are strange code-generation bugs caused on sparc64 by gcc-2.95.2.
2241 * These need to be revisited when a newer toolchain becomes available.
2243 #if defined(__sparc64__) && defined(__GNUC__)
2244 # if __GNUC__ < 2 || (__GNUC__ == 2 && __GNUC_MINOR__ < 96)
2245 # undef SPARC64_GCC_WORKAROUND
2246 # define SPARC64_GCC_WORKAROUND 1
2250 #define DEBUG_PEEP(str,scan,depth) \
2251 DEBUG_OPTIMISE_r({if (scan){ \
2252 SV * const mysv=sv_newmortal(); \
2253 regnode *Next = regnext(scan); \
2254 regprop(RExC_rx, mysv, scan); \
2255 PerlIO_printf(Perl_debug_log, "%*s" str ">%3d: %s (%d)\n", \
2256 (int)depth*2, "", REG_NODE_NUM(scan), SvPV_nolen_const(mysv),\
2257 Next ? (REG_NODE_NUM(Next)) : 0 ); \
2264 #define JOIN_EXACT(scan,min,flags) \
2265 if (PL_regkind[OP(scan)] == EXACT) \
2266 join_exact(pRExC_state,(scan),(min),(flags),NULL,depth+1)
2269 S_join_exact(pTHX_ RExC_state_t *pRExC_state, regnode *scan, I32 *min, U32 flags,regnode *val, U32 depth) {
2270 /* Merge several consecutive EXACTish nodes into one. */
2271 regnode *n = regnext(scan);
2273 regnode *next = scan + NODE_SZ_STR(scan);
2277 regnode *stop = scan;
2278 GET_RE_DEBUG_FLAGS_DECL;
2280 PERL_UNUSED_ARG(depth);
2282 #ifndef EXPERIMENTAL_INPLACESCAN
2283 PERL_UNUSED_ARG(flags);
2284 PERL_UNUSED_ARG(val);
2286 DEBUG_PEEP("join",scan,depth);
2288 /* Skip NOTHING, merge EXACT*. */
2290 ( PL_regkind[OP(n)] == NOTHING ||
2291 (stringok && (OP(n) == OP(scan))))
2293 && NEXT_OFF(scan) + NEXT_OFF(n) < I16_MAX) {
2295 if (OP(n) == TAIL || n > next)
2297 if (PL_regkind[OP(n)] == NOTHING) {
2298 DEBUG_PEEP("skip:",n,depth);
2299 NEXT_OFF(scan) += NEXT_OFF(n);
2300 next = n + NODE_STEP_REGNODE;
2307 else if (stringok) {
2308 const unsigned int oldl = STR_LEN(scan);
2309 regnode * const nnext = regnext(n);
2311 DEBUG_PEEP("merg",n,depth);
2314 if (oldl + STR_LEN(n) > U8_MAX)
2316 NEXT_OFF(scan) += NEXT_OFF(n);
2317 STR_LEN(scan) += STR_LEN(n);
2318 next = n + NODE_SZ_STR(n);
2319 /* Now we can overwrite *n : */
2320 Move(STRING(n), STRING(scan) + oldl, STR_LEN(n), char);
2328 #ifdef EXPERIMENTAL_INPLACESCAN
2329 if (flags && !NEXT_OFF(n)) {
2330 DEBUG_PEEP("atch", val, depth);
2331 if (reg_off_by_arg[OP(n)]) {
2332 ARG_SET(n, val - n);
2335 NEXT_OFF(n) = val - n;
2342 if (UTF && ( OP(scan) == EXACTF ) && ( STR_LEN(scan) >= 6 ) ) {
2344 Two problematic code points in Unicode casefolding of EXACT nodes:
2346 U+0390 - GREEK SMALL LETTER IOTA WITH DIALYTIKA AND TONOS
2347 U+03B0 - GREEK SMALL LETTER UPSILON WITH DIALYTIKA AND TONOS
2353 U+03B9 U+0308 U+0301 0xCE 0xB9 0xCC 0x88 0xCC 0x81
2354 U+03C5 U+0308 U+0301 0xCF 0x85 0xCC 0x88 0xCC 0x81
2356 This means that in case-insensitive matching (or "loose matching",
2357 as Unicode calls it), an EXACTF of length six (the UTF-8 encoded byte
2358 length of the above casefolded versions) can match a target string
2359 of length two (the byte length of UTF-8 encoded U+0390 or U+03B0).
2360 This would rather mess up the minimum length computation.
2362 What we'll do is to look for the tail four bytes, and then peek
2363 at the preceding two bytes to see whether we need to decrease
2364 the minimum length by four (six minus two).
2366 Thanks to the design of UTF-8, there cannot be false matches:
2367 A sequence of valid UTF-8 bytes cannot be a subsequence of
2368 another valid sequence of UTF-8 bytes.
2371 char * const s0 = STRING(scan), *s, *t;
2372 char * const s1 = s0 + STR_LEN(scan) - 1;
2373 char * const s2 = s1 - 4;
2374 #ifdef EBCDIC /* RD tunifold greek 0390 and 03B0 */
2375 const char t0[] = "\xaf\x49\xaf\x42";
2377 const char t0[] = "\xcc\x88\xcc\x81";
2379 const char * const t1 = t0 + 3;
2382 s < s2 && (t = ninstr(s, s1, t0, t1));
2385 if (((U8)t[-1] == 0x68 && (U8)t[-2] == 0xB4) ||
2386 ((U8)t[-1] == 0x46 && (U8)t[-2] == 0xB5))
2388 if (((U8)t[-1] == 0xB9 && (U8)t[-2] == 0xCE) ||
2389 ((U8)t[-1] == 0x85 && (U8)t[-2] == 0xCF))
2397 n = scan + NODE_SZ_STR(scan);
2399 if (PL_regkind[OP(n)] != NOTHING || OP(n) == NOTHING) {
2406 DEBUG_OPTIMISE_r(if (merged){DEBUG_PEEP("finl",scan,depth)});
2410 /* REx optimizer. Converts nodes into quickier variants "in place".
2411 Finds fixed substrings. */
2413 /* Stops at toplevel WHILEM as well as at "last". At end *scanp is set
2414 to the position after last scanned or to NULL. */
2416 #define INIT_AND_WITHP \
2417 assert(!and_withp); \
2418 Newx(and_withp,1,struct regnode_charclass_class); \
2419 SAVEFREEPV(and_withp)
2421 /* this is a chain of data about sub patterns we are processing that
2422 need to be handled seperately/specially in study_chunk. Its so
2423 we can simulate recursion without losing state. */
2425 typedef struct scan_frame {
2426 regnode *last; /* last node to process in this frame */
2427 regnode *next; /* next node to process when last is reached */
2428 struct scan_frame *prev; /*previous frame*/
2429 I32 stop; /* what stopparen do we use */
2433 #define SCAN_COMMIT(s, data, m) scan_commit(s, data, m, is_inf)
2435 #define CASE_SYNST_FNC(nAmE) \
2437 if (flags & SCF_DO_STCLASS_AND) { \
2438 for (value = 0; value < 256; value++) \
2439 if (!is_ ## nAmE ## _cp(value)) \
2440 ANYOF_BITMAP_CLEAR(data->start_class, value); \
2443 for (value = 0; value < 256; value++) \
2444 if (is_ ## nAmE ## _cp(value)) \
2445 ANYOF_BITMAP_SET(data->start_class, value); \
2449 if (flags & SCF_DO_STCLASS_AND) { \
2450 for (value = 0; value < 256; value++) \
2451 if (is_ ## nAmE ## _cp(value)) \
2452 ANYOF_BITMAP_CLEAR(data->start_class, value); \
2455 for (value = 0; value < 256; value++) \
2456 if (!is_ ## nAmE ## _cp(value)) \
2457 ANYOF_BITMAP_SET(data->start_class, value); \
2464 S_study_chunk(pTHX_ RExC_state_t *pRExC_state, regnode **scanp,
2465 I32 *minlenp, I32 *deltap,
2470 struct regnode_charclass_class *and_withp,
2471 U32 flags, U32 depth)
2472 /* scanp: Start here (read-write). */
2473 /* deltap: Write maxlen-minlen here. */
2474 /* last: Stop before this one. */
2475 /* data: string data about the pattern */
2476 /* stopparen: treat close N as END */
2477 /* recursed: which subroutines have we recursed into */
2478 /* and_withp: Valid if flags & SCF_DO_STCLASS_OR */
2481 I32 min = 0, pars = 0, code;
2482 regnode *scan = *scanp, *next;
2484 int is_inf = (flags & SCF_DO_SUBSTR) && (data->flags & SF_IS_INF);
2485 int is_inf_internal = 0; /* The studied chunk is infinite */
2486 I32 is_par = OP(scan) == OPEN ? ARG(scan) : 0;
2487 scan_data_t data_fake;
2488 SV *re_trie_maxbuff = NULL;
2489 regnode *first_non_open = scan;
2490 I32 stopmin = I32_MAX;
2491 scan_frame *frame = NULL;
2493 GET_RE_DEBUG_FLAGS_DECL;
2496 StructCopy(&zero_scan_data, &data_fake, scan_data_t);
2500 while (first_non_open && OP(first_non_open) == OPEN)
2501 first_non_open=regnext(first_non_open);
2506 while ( scan && OP(scan) != END && scan < last ){
2507 /* Peephole optimizer: */
2508 DEBUG_STUDYDATA("Peep:", data,depth);
2509 DEBUG_PEEP("Peep",scan,depth);
2510 JOIN_EXACT(scan,&min,0);
2512 /* Follow the next-chain of the current node and optimize
2513 away all the NOTHINGs from it. */
2514 if (OP(scan) != CURLYX) {
2515 const int max = (reg_off_by_arg[OP(scan)]
2517 /* I32 may be smaller than U16 on CRAYs! */
2518 : (I32_MAX < U16_MAX ? I32_MAX : U16_MAX));
2519 int off = (reg_off_by_arg[OP(scan)] ? ARG(scan) : NEXT_OFF(scan));
2523 /* Skip NOTHING and LONGJMP. */
2524 while ((n = regnext(n))
2525 && ((PL_regkind[OP(n)] == NOTHING && (noff = NEXT_OFF(n)))
2526 || ((OP(n) == LONGJMP) && (noff = ARG(n))))
2527 && off + noff < max)
2529 if (reg_off_by_arg[OP(scan)])
2532 NEXT_OFF(scan) = off;
2537 /* The principal pseudo-switch. Cannot be a switch, since we
2538 look into several different things. */
2539 if (OP(scan) == BRANCH || OP(scan) == BRANCHJ
2540 || OP(scan) == IFTHEN) {
2541 next = regnext(scan);
2543 /* demq: the op(next)==code check is to see if we have "branch-branch" AFAICT */
2545 if (OP(next) == code || code == IFTHEN) {
2546 /* NOTE - There is similar code to this block below for handling
2547 TRIE nodes on a re-study. If you change stuff here check there
2549 I32 max1 = 0, min1 = I32_MAX, num = 0;
2550 struct regnode_charclass_class accum;
2551 regnode * const startbranch=scan;
2553 if (flags & SCF_DO_SUBSTR)
2554 SCAN_COMMIT(pRExC_state, data, minlenp); /* Cannot merge strings after this. */
2555 if (flags & SCF_DO_STCLASS)
2556 cl_init_zero(pRExC_state, &accum);
2558 while (OP(scan) == code) {
2559 I32 deltanext, minnext, f = 0, fake;
2560 struct regnode_charclass_class this_class;
2563 data_fake.flags = 0;
2565 data_fake.whilem_c = data->whilem_c;
2566 data_fake.last_closep = data->last_closep;
2569 data_fake.last_closep = &fake;
2571 data_fake.pos_delta = delta;
2572 next = regnext(scan);
2573 scan = NEXTOPER(scan);
2575 scan = NEXTOPER(scan);
2576 if (flags & SCF_DO_STCLASS) {
2577 cl_init(pRExC_state, &this_class);
2578 data_fake.start_class = &this_class;
2579 f = SCF_DO_STCLASS_AND;
2581 if (flags & SCF_WHILEM_VISITED_POS)
2582 f |= SCF_WHILEM_VISITED_POS;
2584 /* we suppose the run is continuous, last=next...*/
2585 minnext = study_chunk(pRExC_state, &scan, minlenp, &deltanext,
2587 stopparen, recursed, NULL, f,depth+1);
2590 if (max1 < minnext + deltanext)
2591 max1 = minnext + deltanext;
2592 if (deltanext == I32_MAX)
2593 is_inf = is_inf_internal = 1;
2595 if (data_fake.flags & (SF_HAS_PAR|SF_IN_PAR))
2597 if (data_fake.flags & SCF_SEEN_ACCEPT) {
2598 if ( stopmin > minnext)
2599 stopmin = min + min1;
2600 flags &= ~SCF_DO_SUBSTR;
2602 data->flags |= SCF_SEEN_ACCEPT;
2605 if (data_fake.flags & SF_HAS_EVAL)
2606 data->flags |= SF_HAS_EVAL;
2607 data->whilem_c = data_fake.whilem_c;
2609 if (flags & SCF_DO_STCLASS)
2610 cl_or(pRExC_state, &accum, &this_class);
2612 if (code == IFTHEN && num < 2) /* Empty ELSE branch */
2614 if (flags & SCF_DO_SUBSTR) {
2615 data->pos_min += min1;
2616 data->pos_delta += max1 - min1;
2617 if (max1 != min1 || is_inf)
2618 data->longest = &(data->longest_float);
2621 delta += max1 - min1;
2622 if (flags & SCF_DO_STCLASS_OR) {
2623 cl_or(pRExC_state, data->start_class, &accum);
2625 cl_and(data->start_class, and_withp);
2626 flags &= ~SCF_DO_STCLASS;
2629 else if (flags & SCF_DO_STCLASS_AND) {
2631 cl_and(data->start_class, &accum);
2632 flags &= ~SCF_DO_STCLASS;
2635 /* Switch to OR mode: cache the old value of
2636 * data->start_class */
2638 StructCopy(data->start_class, and_withp,
2639 struct regnode_charclass_class);
2640 flags &= ~SCF_DO_STCLASS_AND;
2641 StructCopy(&accum, data->start_class,
2642 struct regnode_charclass_class);
2643 flags |= SCF_DO_STCLASS_OR;
2644 data->start_class->flags |= ANYOF_EOS;
2648 if (PERL_ENABLE_TRIE_OPTIMISATION && OP( startbranch ) == BRANCH ) {
2651 Assuming this was/is a branch we are dealing with: 'scan' now
2652 points at the item that follows the branch sequence, whatever
2653 it is. We now start at the beginning of the sequence and look
2660 which would be constructed from a pattern like /A|LIST|OF|WORDS/
2662 If we can find such a subseqence we need to turn the first
2663 element into a trie and then add the subsequent branch exact
2664 strings to the trie.
2668 1. patterns where the whole set of branch can be converted.
2670 2. patterns where only a subset can be converted.
2672 In case 1 we can replace the whole set with a single regop
2673 for the trie. In case 2 we need to keep the start and end
2676 'BRANCH EXACT; BRANCH EXACT; BRANCH X'
2677 becomes BRANCH TRIE; BRANCH X;
2679 There is an additional case, that being where there is a
2680 common prefix, which gets split out into an EXACT like node
2681 preceding the TRIE node.
2683 If x(1..n)==tail then we can do a simple trie, if not we make
2684 a "jump" trie, such that when we match the appropriate word
2685 we "jump" to the appopriate tail node. Essentailly we turn
2686 a nested if into a case structure of sorts.
2691 if (!re_trie_maxbuff) {
2692 re_trie_maxbuff = get_sv(RE_TRIE_MAXBUF_NAME, 1);
2693 if (!SvIOK(re_trie_maxbuff))
2694 sv_setiv(re_trie_maxbuff, RE_TRIE_MAXBUF_INIT);
2696 if ( SvIV(re_trie_maxbuff)>=0 ) {
2698 regnode *first = (regnode *)NULL;
2699 regnode *last = (regnode *)NULL;
2700 regnode *tail = scan;
2705 SV * const mysv = sv_newmortal(); /* for dumping */
2707 /* var tail is used because there may be a TAIL
2708 regop in the way. Ie, the exacts will point to the
2709 thing following the TAIL, but the last branch will
2710 point at the TAIL. So we advance tail. If we
2711 have nested (?:) we may have to move through several
2715 while ( OP( tail ) == TAIL ) {
2716 /* this is the TAIL generated by (?:) */
2717 tail = regnext( tail );
2722 regprop(RExC_rx, mysv, tail );
2723 PerlIO_printf( Perl_debug_log, "%*s%s%s\n",
2724 (int)depth * 2 + 2, "",
2725 "Looking for TRIE'able sequences. Tail node is: ",
2726 SvPV_nolen_const( mysv )
2732 step through the branches, cur represents each
2733 branch, noper is the first thing to be matched
2734 as part of that branch and noper_next is the
2735 regnext() of that node. if noper is an EXACT
2736 and noper_next is the same as scan (our current
2737 position in the regex) then the EXACT branch is
2738 a possible optimization target. Once we have
2739 two or more consequetive such branches we can
2740 create a trie of the EXACT's contents and stich
2741 it in place. If the sequence represents all of
2742 the branches we eliminate the whole thing and
2743 replace it with a single TRIE. If it is a
2744 subsequence then we need to stitch it in. This
2745 means the first branch has to remain, and needs
2746 to be repointed at the item on the branch chain
2747 following the last branch optimized. This could
2748 be either a BRANCH, in which case the
2749 subsequence is internal, or it could be the
2750 item following the branch sequence in which
2751 case the subsequence is at the end.
2755 /* dont use tail as the end marker for this traverse */
2756 for ( cur = startbranch ; cur != scan ; cur = regnext( cur ) ) {
2757 regnode * const noper = NEXTOPER( cur );
2758 #if defined(DEBUGGING) || defined(NOJUMPTRIE)
2759 regnode * const noper_next = regnext( noper );
2763 regprop(RExC_rx, mysv, cur);
2764 PerlIO_printf( Perl_debug_log, "%*s- %s (%d)",
2765 (int)depth * 2 + 2,"", SvPV_nolen_const( mysv ), REG_NODE_NUM(cur) );
2767 regprop(RExC_rx, mysv, noper);
2768 PerlIO_printf( Perl_debug_log, " -> %s",
2769 SvPV_nolen_const(mysv));
2772 regprop(RExC_rx, mysv, noper_next );
2773 PerlIO_printf( Perl_debug_log,"\t=> %s\t",
2774 SvPV_nolen_const(mysv));
2776 PerlIO_printf( Perl_debug_log, "(First==%d,Last==%d,Cur==%d)\n",
2777 REG_NODE_NUM(first), REG_NODE_NUM(last), REG_NODE_NUM(cur) );
2779 if ( (((first && optype!=NOTHING) ? OP( noper ) == optype
2780 : PL_regkind[ OP( noper ) ] == EXACT )
2781 || OP(noper) == NOTHING )
2783 && noper_next == tail
2788 if ( !first || optype == NOTHING ) {
2789 if (!first) first = cur;
2790 optype = OP( noper );
2796 Currently we assume that the trie can handle unicode and ascii
2797 matches fold cased matches. If this proves true then the following
2798 define will prevent tries in this situation.
2800 #define TRIE_TYPE_IS_SAFE (UTF || optype==EXACT)
2802 #define TRIE_TYPE_IS_SAFE 1
2803 if ( last && TRIE_TYPE_IS_SAFE ) {
2804 make_trie( pRExC_state,
2805 startbranch, first, cur, tail, count,
2808 if ( PL_regkind[ OP( noper ) ] == EXACT
2810 && noper_next == tail
2815 optype = OP( noper );
2825 regprop(RExC_rx, mysv, cur);
2826 PerlIO_printf( Perl_debug_log,
2827 "%*s- %s (%d) <SCAN FINISHED>\n", (int)depth * 2 + 2,
2828 "", SvPV_nolen_const( mysv ),REG_NODE_NUM(cur));
2832 if ( last && TRIE_TYPE_IS_SAFE ) {
2833 made= make_trie( pRExC_state, startbranch, first, scan, tail, count, optype, depth+1 );
2834 #ifdef TRIE_STUDY_OPT
2835 if ( ((made == MADE_EXACT_TRIE &&
2836 startbranch == first)
2837 || ( first_non_open == first )) &&
2839 flags |= SCF_TRIE_RESTUDY;
2840 if ( startbranch == first
2843 RExC_seen &=~REG_TOP_LEVEL_BRANCHES;
2853 else if ( code == BRANCHJ ) { /* single branch is optimized. */
2854 scan = NEXTOPER(NEXTOPER(scan));
2855 } else /* single branch is optimized. */
2856 scan = NEXTOPER(scan);
2858 } else if (OP(scan) == SUSPEND || OP(scan) == GOSUB || OP(scan) == GOSTART) {
2859 scan_frame *newframe = NULL;
2864 if (OP(scan) != SUSPEND) {
2865 /* set the pointer */
2866 if (OP(scan) == GOSUB) {
2868 RExC_recurse[ARG2L(scan)] = scan;
2869 start = RExC_open_parens[paren-1];
2870 end = RExC_close_parens[paren-1];
2873 start = RExC_rxi->program + 1;
2877 Newxz(recursed, (((RExC_npar)>>3) +1), U8);
2878 SAVEFREEPV(recursed);
2880 if (!PAREN_TEST(recursed,paren+1)) {
2881 PAREN_SET(recursed,paren+1);
2882 Newx(newframe,1,scan_frame);
2884 if (flags & SCF_DO_SUBSTR) {
2885 SCAN_COMMIT(pRExC_state,data,minlenp);
2886 data->longest = &(data->longest_float);
2888 is_inf = is_inf_internal = 1;
2889 if (flags & SCF_DO_STCLASS_OR) /* Allow everything */
2890 cl_anything(pRExC_state, data->start_class);
2891 flags &= ~SCF_DO_STCLASS;
2894 Newx(newframe,1,scan_frame);
2897 end = regnext(scan);
2902 SAVEFREEPV(newframe);
2903 newframe->next = regnext(scan);
2904 newframe->last = last;
2905 newframe->stop = stopparen;
2906 newframe->prev = frame;
2916 else if (OP(scan) == EXACT) {
2917 I32 l = STR_LEN(scan);
2920 const U8 * const s = (U8*)STRING(scan);
2921 l = utf8_length(s, s + l);
2922 uc = utf8_to_uvchr(s, NULL);
2924 uc = *((U8*)STRING(scan));
2927 if (flags & SCF_DO_SUBSTR) { /* Update longest substr. */
2928 /* The code below prefers earlier match for fixed
2929 offset, later match for variable offset. */
2930 if (data->last_end == -1) { /* Update the start info. */
2931 data->last_start_min = data->pos_min;
2932 data->last_start_max = is_inf
2933 ? I32_MAX : data->pos_min + data->pos_delta;
2935 sv_catpvn(data->last_found, STRING(scan), STR_LEN(scan));
2937 SvUTF8_on(data->last_found);
2939 SV * const sv = data->last_found;
2940 MAGIC * const mg = SvUTF8(sv) && SvMAGICAL(sv) ?
2941 mg_find(sv, PERL_MAGIC_utf8) : NULL;
2942 if (mg && mg->mg_len >= 0)
2943 mg->mg_len += utf8_length((U8*)STRING(scan),
2944 (U8*)STRING(scan)+STR_LEN(scan));
2946 data->last_end = data->pos_min + l;
2947 data->pos_min += l; /* As in the first entry. */
2948 data->flags &= ~SF_BEFORE_EOL;
2950 if (flags & SCF_DO_STCLASS_AND) {
2951 /* Check whether it is compatible with what we know already! */
2955 (!(data->start_class->flags & (ANYOF_CLASS | ANYOF_LOCALE))
2956 && !ANYOF_BITMAP_TEST(data->start_class, uc)
2957 && (!(data->start_class->flags & ANYOF_FOLD)
2958 || !ANYOF_BITMAP_TEST(data->start_class, PL_fold[uc])))
2961 ANYOF_CLASS_ZERO(data->start_class);
2962 ANYOF_BITMAP_ZERO(data->start_class);
2964 ANYOF_BITMAP_SET(data->start_class, uc);
2965 data->start_class->flags &= ~ANYOF_EOS;
2967 data->start_class->flags &= ~ANYOF_UNICODE_ALL;
2969 else if (flags & SCF_DO_STCLASS_OR) {
2970 /* false positive possible if the class is case-folded */
2972 ANYOF_BITMAP_SET(data->start_class, uc);
2974 data->start_class->flags |= ANYOF_UNICODE_ALL;
2975 data->start_class->flags &= ~ANYOF_EOS;
2976 cl_and(data->start_class, and_withp);
2978 flags &= ~SCF_DO_STCLASS;
2980 else if (PL_regkind[OP(scan)] == EXACT) { /* But OP != EXACT! */
2981 I32 l = STR_LEN(scan);
2982 UV uc = *((U8*)STRING(scan));
2984 /* Search for fixed substrings supports EXACT only. */
2985 if (flags & SCF_DO_SUBSTR) {
2987 SCAN_COMMIT(pRExC_state, data, minlenp);
2990 const U8 * const s = (U8 *)STRING(scan);
2991 l = utf8_length(s, s + l);
2992 uc = utf8_to_uvchr(s, NULL);
2995 if (flags & SCF_DO_SUBSTR)
2997 if (flags & SCF_DO_STCLASS_AND) {
2998 /* Check whether it is compatible with what we know already! */
3002 (!(data->start_class->flags & (ANYOF_CLASS | ANYOF_LOCALE))
3003 && !ANYOF_BITMAP_TEST(data->start_class, uc)
3004 && !ANYOF_BITMAP_TEST(data->start_class, PL_fold[uc])))
3006 ANYOF_CLASS_ZERO(data->start_class);
3007 ANYOF_BITMAP_ZERO(data->start_class);
3009 ANYOF_BITMAP_SET(data->start_class, uc);
3010 data->start_class->flags &= ~ANYOF_EOS;
3011 data->start_class->flags |= ANYOF_FOLD;
3012 if (OP(scan) == EXACTFL)
3013 data->start_class->flags |= ANYOF_LOCALE;
3016 else if (flags & SCF_DO_STCLASS_OR) {
3017 if (data->start_class->flags & ANYOF_FOLD) {
3018 /* false positive possible if the class is case-folded.
3019 Assume that the locale settings are the same... */
3021 ANYOF_BITMAP_SET(data->start_class, uc);
3022 data->start_class->flags &= ~ANYOF_EOS;
3024 cl_and(data->start_class, and_withp);
3026 flags &= ~SCF_DO_STCLASS;
3028 else if (strchr((const char*)PL_varies,OP(scan))) {
3029 I32 mincount, maxcount, minnext, deltanext, fl = 0;
3030 I32 f = flags, pos_before = 0;
3031 regnode * const oscan = scan;
3032 struct regnode_charclass_class this_class;
3033 struct regnode_charclass_class *oclass = NULL;
3034 I32 next_is_eval = 0;
3036 switch (PL_regkind[OP(scan)]) {
3037 case WHILEM: /* End of (?:...)* . */
3038 scan = NEXTOPER(scan);
3041 if (flags & (SCF_DO_SUBSTR | SCF_DO_STCLASS)) {
3042 next = NEXTOPER(scan);
3043 if (OP(next) == EXACT || (flags & SCF_DO_STCLASS)) {
3045 maxcount = REG_INFTY;
3046 next = regnext(scan);
3047 scan = NEXTOPER(scan);
3051 if (flags & SCF_DO_SUBSTR)
3056 if (flags & SCF_DO_STCLASS) {
3058 maxcount = REG_INFTY;
3059 next = regnext(scan);
3060 scan = NEXTOPER(scan);
3063 is_inf = is_inf_internal = 1;
3064 scan = regnext(scan);
3065 if (flags & SCF_DO_SUBSTR) {
3066 SCAN_COMMIT(pRExC_state, data, minlenp); /* Cannot extend fixed substrings */
3067 data->longest = &(data->longest_float);
3069 goto optimize_curly_tail;
3071 if (stopparen>0 && (OP(scan)==CURLYN || OP(scan)==CURLYM)
3072 && (scan->flags == stopparen))
3077 mincount = ARG1(scan);
3078 maxcount = ARG2(scan);
3080 next = regnext(scan);
3081 if (OP(scan) == CURLYX) {
3082 I32 lp = (data ? *(data->last_closep) : 0);
3083 scan->flags = ((lp <= (I32)U8_MAX) ? (U8)lp : U8_MAX);
3085 scan = NEXTOPER(scan) + EXTRA_STEP_2ARGS;
3086 next_is_eval = (OP(scan) == EVAL);
3088 if (flags & SCF_DO_SUBSTR) {
3089 if (mincount == 0) SCAN_COMMIT(pRExC_state,data,minlenp); /* Cannot extend fixed substrings */
3090 pos_before = data->pos_min;
3094 data->flags &= ~(SF_HAS_PAR|SF_IN_PAR|SF_HAS_EVAL);
3096 data->flags |= SF_IS_INF;
3098 if (flags & SCF_DO_STCLASS) {
3099 cl_init(pRExC_state, &this_class);
3100 oclass = data->start_class;
3101 data->start_class = &this_class;
3102 f |= SCF_DO_STCLASS_AND;
3103 f &= ~SCF_DO_STCLASS_OR;
3105 /* These are the cases when once a subexpression
3106 fails at a particular position, it cannot succeed
3107 even after backtracking at the enclosing scope.
3109 XXXX what if minimal match and we are at the
3110 initial run of {n,m}? */
3111 if ((mincount != maxcount - 1) && (maxcount != REG_INFTY))
3112 f &= ~SCF_WHILEM_VISITED_POS;
3114 /* This will finish on WHILEM, setting scan, or on NULL: */
3115 minnext = study_chunk(pRExC_state, &scan, minlenp, &deltanext,
3116 last, data, stopparen, recursed, NULL,
3118 ? (f & ~SCF_DO_SUBSTR) : f),depth+1);
3120 if (flags & SCF_DO_STCLASS)
3121 data->start_class = oclass;
3122 if (mincount == 0 || minnext == 0) {
3123 if (flags & SCF_DO_STCLASS_OR) {
3124 cl_or(pRExC_state, data->start_class, &this_class);
3126 else if (flags & SCF_DO_STCLASS_AND) {
3127 /* Switch to OR mode: cache the old value of
3128 * data->start_class */
3130 StructCopy(data->start_class, and_withp,
3131 struct regnode_charclass_class);
3132 flags &= ~SCF_DO_STCLASS_AND;
3133 StructCopy(&this_class, data->start_class,
3134 struct regnode_charclass_class);
3135 flags |= SCF_DO_STCLASS_OR;
3136 data->start_class->flags |= ANYOF_EOS;
3138 } else { /* Non-zero len */
3139 if (flags & SCF_DO_STCLASS_OR) {
3140 cl_or(pRExC_state, data->start_class, &this_class);
3141 cl_and(data->start_class, and_withp);
3143 else if (flags & SCF_DO_STCLASS_AND)
3144 cl_and(data->start_class, &this_class);
3145 flags &= ~SCF_DO_STCLASS;
3147 if (!scan) /* It was not CURLYX, but CURLY. */
3149 if ( /* ? quantifier ok, except for (?{ ... }) */
3150 (next_is_eval || !(mincount == 0 && maxcount == 1))
3151 && (minnext == 0) && (deltanext == 0)
3152 && data && !(data->flags & (SF_HAS_PAR|SF_IN_PAR))
3153 && maxcount <= REG_INFTY/3 /* Complement check for big count */
3154 && ckWARN(WARN_REGEXP))
3157 "Quantifier unexpected on zero-length expression");
3160 min += minnext * mincount;
3161 is_inf_internal |= ((maxcount == REG_INFTY
3162 && (minnext + deltanext) > 0)
3163 || deltanext == I32_MAX);
3164 is_inf |= is_inf_internal;
3165 delta += (minnext + deltanext) * maxcount - minnext * mincount;
3167 /* Try powerful optimization CURLYX => CURLYN. */
3168 if ( OP(oscan) == CURLYX && data
3169 && data->flags & SF_IN_PAR
3170 && !(data->flags & SF_HAS_EVAL)
3171 && !deltanext && minnext == 1 ) {
3172 /* Try to optimize to CURLYN. */
3173 regnode *nxt = NEXTOPER(oscan) + EXTRA_STEP_2ARGS;
3174 regnode * const nxt1 = nxt;
3181 if (!strchr((const char*)PL_simple,OP(nxt))
3182 && !(PL_regkind[OP(nxt)] == EXACT
3183 && STR_LEN(nxt) == 1))
3189 if (OP(nxt) != CLOSE)
3191 if (RExC_open_parens) {
3192 RExC_open_parens[ARG(nxt1)-1]=oscan; /*open->CURLYM*/
3193 RExC_close_parens[ARG(nxt1)-1]=nxt+2; /*close->while*/
3195 /* Now we know that nxt2 is the only contents: */
3196 oscan->flags = (U8)ARG(nxt);
3198 OP(nxt1) = NOTHING; /* was OPEN. */
3201 OP(nxt1 + 1) = OPTIMIZED; /* was count. */
3202 NEXT_OFF(nxt1+ 1) = 0; /* just for consistancy. */
3203 NEXT_OFF(nxt2) = 0; /* just for consistancy with CURLY. */
3204 OP(nxt) = OPTIMIZED; /* was CLOSE. */
3205 OP(nxt + 1) = OPTIMIZED; /* was count. */
3206 NEXT_OFF(nxt+ 1) = 0; /* just for consistancy. */
3211 /* Try optimization CURLYX => CURLYM. */
3212 if ( OP(oscan) == CURLYX && data
3213 && !(data->flags & SF_HAS_PAR)
3214 && !(data->flags & SF_HAS_EVAL)
3215 && !deltanext /* atom is fixed width */
3216 && minnext != 0 /* CURLYM can't handle zero width */
3218 /* XXXX How to optimize if data == 0? */
3219 /* Optimize to a simpler form. */
3220 regnode *nxt = NEXTOPER(oscan) + EXTRA_STEP_2ARGS; /* OPEN */
3224 while ( (nxt2 = regnext(nxt)) /* skip over embedded stuff*/
3225 && (OP(nxt2) != WHILEM))
3227 OP(nxt2) = SUCCEED; /* Whas WHILEM */
3228 /* Need to optimize away parenths. */
3229 if (data->flags & SF_IN_PAR) {
3230 /* Set the parenth number. */
3231 regnode *nxt1 = NEXTOPER(oscan) + EXTRA_STEP_2ARGS; /* OPEN*/
3233 if (OP(nxt) != CLOSE)
3234 FAIL("Panic opt close");
3235 oscan->flags = (U8)ARG(nxt);
3236 if (RExC_open_parens) {
3237 RExC_open_parens[ARG(nxt1)-1]=oscan; /*open->CURLYM*/
3238 RExC_close_parens[ARG(nxt1)-1]=nxt2+1; /*close->NOTHING*/
3240 OP(nxt1) = OPTIMIZED; /* was OPEN. */
3241 OP(nxt) = OPTIMIZED; /* was CLOSE. */
3244 OP(nxt1 + 1) = OPTIMIZED; /* was count. */
3245 OP(nxt + 1) = OPTIMIZED; /* was count. */
3246 NEXT_OFF(nxt1 + 1) = 0; /* just for consistancy. */
3247 NEXT_OFF(nxt + 1) = 0; /* just for consistancy. */
3250 while ( nxt1 && (OP(nxt1) != WHILEM)) {
3251 regnode *nnxt = regnext(nxt1);
3254 if (reg_off_by_arg[OP(nxt1)])
3255 ARG_SET(nxt1, nxt2 - nxt1);
3256 else if (nxt2 - nxt1 < U16_MAX)
3257 NEXT_OFF(nxt1) = nxt2 - nxt1;
3259 OP(nxt) = NOTHING; /* Cannot beautify */
3264 /* Optimize again: */
3265 study_chunk(pRExC_state, &nxt1, minlenp, &deltanext, nxt,
3266 NULL, stopparen, recursed, NULL, 0,depth+1);
3271 else if ((OP(oscan) == CURLYX)
3272 && (flags & SCF_WHILEM_VISITED_POS)
3273 /* See the comment on a similar expression above.
3274 However, this time it not a subexpression
3275 we care about, but the expression itself. */
3276 && (maxcount == REG_INFTY)
3277 && data && ++data->whilem_c < 16) {
3278 /* This stays as CURLYX, we can put the count/of pair. */
3279 /* Find WHILEM (as in regexec.c) */
3280 regnode *nxt = oscan + NEXT_OFF(oscan);
3282 if (OP(PREVOPER(nxt)) == NOTHING) /* LONGJMP */
3284 PREVOPER(nxt)->flags = (U8)(data->whilem_c
3285 | (RExC_whilem_seen << 4)); /* On WHILEM */
3287 if (data && fl & (SF_HAS_PAR|SF_IN_PAR))
3289 if (flags & SCF_DO_SUBSTR) {
3290 SV *last_str = NULL;
3291 int counted = mincount != 0;
3293 if (data->last_end > 0 && mincount != 0) { /* Ends with a string. */
3294 #if defined(SPARC64_GCC_WORKAROUND)
3297 const char *s = NULL;
3300 if (pos_before >= data->last_start_min)
3303 b = data->last_start_min;
3306 s = SvPV_const(data->last_found, l);
3307 old = b - data->last_start_min;
3310 I32 b = pos_before >= data->last_start_min
3311 ? pos_before : data->last_start_min;
3313 const char * const s = SvPV_const(data->last_found, l);
3314 I32 old = b - data->last_start_min;
3318 old = utf8_hop((U8*)s, old) - (U8*)s;
3321 /* Get the added string: */
3322 last_str = newSVpvn_utf8(s + old, l, UTF);
3323 if (deltanext == 0 && pos_before == b) {
3324 /* What was added is a constant string */
3326 SvGROW(last_str, (mincount * l) + 1);
3327 repeatcpy(SvPVX(last_str) + l,
3328 SvPVX_const(last_str), l, mincount - 1);
3329 SvCUR_set(last_str, SvCUR(last_str) * mincount);
3330 /* Add additional parts. */
3331 SvCUR_set(data->last_found,
3332 SvCUR(data->last_found) - l);
3333 sv_catsv(data->last_found, last_str);
3335 SV * sv = data->last_found;
3337 SvUTF8(sv) && SvMAGICAL(sv) ?
3338 mg_find(sv, PERL_MAGIC_utf8) : NULL;
3339 if (mg && mg->mg_len >= 0)
3340 mg->mg_len += CHR_SVLEN(last_str) - l;
3342 data->last_end += l * (mincount - 1);
3345 /* start offset must point into the last copy */
3346 data->last_start_min += minnext * (mincount - 1);
3347 data->last_start_max += is_inf ? I32_MAX
3348 : (maxcount - 1) * (minnext + data->pos_delta);
3351 /* It is counted once already... */
3352 data->pos_min += minnext * (mincount - counted);
3353 data->pos_delta += - counted * deltanext +
3354 (minnext + deltanext) * maxcount - minnext * mincount;
3355 if (mincount != maxcount) {
3356 /* Cannot extend fixed substrings found inside
3358 SCAN_COMMIT(pRExC_state,data,minlenp);
3359 if (mincount && last_str) {
3360 SV * const sv = data->last_found;
3361 MAGIC * const mg = SvUTF8(sv) && SvMAGICAL(sv) ?
3362 mg_find(sv, PERL_MAGIC_utf8) : NULL;
3366 sv_setsv(sv, last_str);
3367 data->last_end = data->pos_min;
3368 data->last_start_min =
3369 data->pos_min - CHR_SVLEN(last_str);
3370 data->last_start_max = is_inf
3372 : data->pos_min + data->pos_delta
3373 - CHR_SVLEN(last_str);
3375 data->longest = &(data->longest_float);
3377 SvREFCNT_dec(last_str);
3379 if (data && (fl & SF_HAS_EVAL))
3380 data->flags |= SF_HAS_EVAL;
3381 optimize_curly_tail:
3382 if (OP(oscan) != CURLYX) {
3383 while (PL_regkind[OP(next = regnext(oscan))] == NOTHING
3385 NEXT_OFF(oscan) += NEXT_OFF(next);
3388 default: /* REF and CLUMP only? */
3389 if (flags & SCF_DO_SUBSTR) {
3390 SCAN_COMMIT(pRExC_state,data,minlenp); /* Cannot expect anything... */
3391 data->longest = &(data->longest_float);
3393 is_inf = is_inf_internal = 1;
3394 if (flags & SCF_DO_STCLASS_OR)
3395 cl_anything(pRExC_state, data->start_class);
3396 flags &= ~SCF_DO_STCLASS;
3400 else if (OP(scan) == LNBREAK) {
3401 if (flags & SCF_DO_STCLASS) {
3403 data->start_class->flags &= ~ANYOF_EOS; /* No match on empty */
3404 if (flags & SCF_DO_STCLASS_AND) {
3405 for (value = 0; value < 256; value++)
3406 if (!is_VERTWS_cp(value))
3407 ANYOF_BITMAP_CLEAR(data->start_class, value);
3410 for (value = 0; value < 256; value++)
3411 if (is_VERTWS_cp(value))
3412 ANYOF_BITMAP_SET(data->start_class, value);
3414 if (flags & SCF_DO_STCLASS_OR)
3415 cl_and(data->start_class, and_withp);
3416 flags &= ~SCF_DO_STCLASS;
3420 if (flags & SCF_DO_SUBSTR) {
3421 SCAN_COMMIT(pRExC_state,data,minlenp); /* Cannot expect anything... */
3423 data->pos_delta += 1;
3424 data->longest = &(data->longest_float);
3428 else if (OP(scan) == FOLDCHAR) {
3429 int d = ARG(scan)==0xDF ? 1 : 2;
3430 flags &= ~SCF_DO_STCLASS;
3433 if (flags & SCF_DO_SUBSTR) {
3434 SCAN_COMMIT(pRExC_state,data,minlenp); /* Cannot expect anything... */
3436 data->pos_delta += d;
3437 data->longest = &(data->longest_float);
3440 else if (strchr((const char*)PL_simple,OP(scan))) {
3443 if (flags & SCF_DO_SUBSTR) {
3444 SCAN_COMMIT(pRExC_state,data,minlenp);
3448 if (flags & SCF_DO_STCLASS) {
3449 data->start_class->flags &= ~ANYOF_EOS; /* No match on empty */
3451 /* Some of the logic below assumes that switching
3452 locale on will only add false positives. */
3453 switch (PL_regkind[OP(scan)]) {
3457 /* Perl_croak(aTHX_ "panic: unexpected simple REx opcode %d", OP(scan)); */
3458 if (flags & SCF_DO_STCLASS_OR) /* Allow everything */
3459 cl_anything(pRExC_state, data->start_class);
3462 if (OP(scan) == SANY)
3464 if (flags & SCF_DO_STCLASS_OR) { /* Everything but \n */
3465 value = (ANYOF_BITMAP_TEST(data->start_class,'\n')
3466 || (data->start_class->flags & ANYOF_CLASS));
3467 cl_anything(pRExC_state, data->start_class);
3469 if (flags & SCF_DO_STCLASS_AND || !value)
3470 ANYOF_BITMAP_CLEAR(data->start_class,'\n');
3473 if (flags & SCF_DO_STCLASS_AND)
3474 cl_and(data->start_class,
3475 (struct regnode_charclass_class*)scan);
3477 cl_or(pRExC_state, data->start_class,
3478 (struct regnode_charclass_class*)scan);
3481 if (flags & SCF_DO_STCLASS_AND) {
3482 if (!(data->start_class->flags & ANYOF_LOCALE)) {
3483 ANYOF_CLASS_CLEAR(data->start_class,ANYOF_NALNUM);
3484 for (value = 0; value < 256; value++)
3485 if (!isALNUM(value))
3486 ANYOF_BITMAP_CLEAR(data->start_class, value);
3490 if (data->start_class->flags & ANYOF_LOCALE)
3491 ANYOF_CLASS_SET(data->start_class,ANYOF_ALNUM);
3493 for (value = 0; value < 256; value++)
3495 ANYOF_BITMAP_SET(data->start_class, value);
3500 if (flags & SCF_DO_STCLASS_AND) {
3501 if (data->start_class->flags & ANYOF_LOCALE)
3502 ANYOF_CLASS_CLEAR(data->start_class,ANYOF_NALNUM);
3505 ANYOF_CLASS_SET(data->start_class,ANYOF_ALNUM);
3506 data->start_class->flags |= ANYOF_LOCALE;
3510 if (flags & SCF_DO_STCLASS_AND) {
3511 if (!(data->start_class->flags & ANYOF_LOCALE)) {
3512 ANYOF_CLASS_CLEAR(data->start_class,ANYOF_ALNUM);
3513 for (value = 0; value < 256; value++)
3515 ANYOF_BITMAP_CLEAR(data->start_class, value);
3519 if (data->start_class->flags & ANYOF_LOCALE)
3520 ANYOF_CLASS_SET(data->start_class,ANYOF_NALNUM);
3522 for (value = 0; value < 256; value++)
3523 if (!isALNUM(value))
3524 ANYOF_BITMAP_SET(data->start_class, value);
3529 if (flags & SCF_DO_STCLASS_AND) {
3530 if (data->start_class->flags & ANYOF_LOCALE)
3531 ANYOF_CLASS_CLEAR(data->start_class,ANYOF_ALNUM);
3534 data->start_class->flags |= ANYOF_LOCALE;
3535 ANYOF_CLASS_SET(data->start_class,ANYOF_NALNUM);
3539 if (flags & SCF_DO_STCLASS_AND) {
3540 if (!(data->start_class->flags & ANYOF_LOCALE)) {
3541 ANYOF_CLASS_CLEAR(data->start_class,ANYOF_NSPACE);
3542 for (value = 0; value < 256; value++)
3543 if (!isSPACE(value))
3544 ANYOF_BITMAP_CLEAR(data->start_class, value);
3548 if (data->start_class->flags & ANYOF_LOCALE)
3549 ANYOF_CLASS_SET(data->start_class,ANYOF_SPACE);
3551 for (value = 0; value < 256; value++)
3553 ANYOF_BITMAP_SET(data->start_class, value);
3558 if (flags & SCF_DO_STCLASS_AND) {
3559 if (data->start_class->flags & ANYOF_LOCALE)
3560 ANYOF_CLASS_CLEAR(data->start_class,ANYOF_NSPACE);
3563 data->start_class->flags |= ANYOF_LOCALE;
3564 ANYOF_CLASS_SET(data->start_class,ANYOF_SPACE);
3568 if (flags & SCF_DO_STCLASS_AND) {
3569 if (!(data->start_class->flags & ANYOF_LOCALE)) {
3570 ANYOF_CLASS_CLEAR(data->start_class,ANYOF_SPACE);
3571 for (value = 0; value < 256; value++)
3573 ANYOF_BITMAP_CLEAR(data->start_class, value);
3577 if (data->start_class->flags & ANYOF_LOCALE)
3578 ANYOF_CLASS_SET(data->start_class,ANYOF_NSPACE);
3580 for (value = 0; value < 256; value++)
3581 if (!isSPACE(value))
3582 ANYOF_BITMAP_SET(data->start_class, value);
3587 if (flags & SCF_DO_STCLASS_AND) {
3588 if (data->start_class->flags & ANYOF_LOCALE) {
3589 ANYOF_CLASS_CLEAR(data->start_class,ANYOF_SPACE);
3590 for (value = 0; value < 256; value++)
3591 if (!isSPACE(value))
3592 ANYOF_BITMAP_CLEAR(data->start_class, value);
3596 data->start_class->flags |= ANYOF_LOCALE;
3597 ANYOF_CLASS_SET(data->start_class,ANYOF_NSPACE);
3601 if (flags & SCF_DO_STCLASS_AND) {
3602 ANYOF_CLASS_CLEAR(data->start_class,ANYOF_NDIGIT);
3603 for (value = 0; value < 256; value++)
3604 if (!isDIGIT(value))
3605 ANYOF_BITMAP_CLEAR(data->start_class, value);
3608 if (data->start_class->flags & ANYOF_LOCALE)
3609 ANYOF_CLASS_SET(data->start_class,ANYOF_DIGIT);
3611 for (value = 0; value < 256; value++)
3613 ANYOF_BITMAP_SET(data->start_class, value);
3618 if (flags & SCF_DO_STCLASS_AND) {
3619 ANYOF_CLASS_CLEAR(data->start_class,ANYOF_DIGIT);
3620 for (value = 0; value < 256; value++)
3622 ANYOF_BITMAP_CLEAR(data->start_class, value);
3625 if (data->start_class->flags & ANYOF_LOCALE)
3626 ANYOF_CLASS_SET(data->start_class,ANYOF_NDIGIT);
3628 for (value = 0; value < 256; value++)
3629 if (!isDIGIT(value))
3630 ANYOF_BITMAP_SET(data->start_class, value);
3634 CASE_SYNST_FNC(VERTWS);
3635 CASE_SYNST_FNC(HORIZWS);
3638 if (flags & SCF_DO_STCLASS_OR)
3639 cl_and(data->start_class, and_withp);
3640 flags &= ~SCF_DO_STCLASS;
3643 else if (PL_regkind[OP(scan)] == EOL && flags & SCF_DO_SUBSTR) {
3644 data->flags |= (OP(scan) == MEOL
3648 else if ( PL_regkind[OP(scan)] == BRANCHJ
3649 /* Lookbehind, or need to calculate parens/evals/stclass: */
3650 && (scan->flags || data || (flags & SCF_DO_STCLASS))
3651 && (OP(scan) == IFMATCH || OP(scan) == UNLESSM)) {
3652 if ( !PERL_ENABLE_POSITIVE_ASSERTION_STUDY
3653 || OP(scan) == UNLESSM )
3655 /* Negative Lookahead/lookbehind
3656 In this case we can't do fixed string optimisation.
3659 I32 deltanext, minnext, fake = 0;
3661 struct regnode_charclass_class intrnl;
3664 data_fake.flags = 0;
3666 data_fake.whilem_c = data->whilem_c;
3667 data_fake.last_closep = data->last_closep;
3670 data_fake.last_closep = &fake;
3671 data_fake.pos_delta = delta;
3672 if ( flags & SCF_DO_STCLASS && !scan->flags
3673 && OP(scan) == IFMATCH ) { /* Lookahead */
3674 cl_init(pRExC_state, &intrnl);
3675 data_fake.start_class = &intrnl;
3676 f |= SCF_DO_STCLASS_AND;
3678 if (flags & SCF_WHILEM_VISITED_POS)
3679 f |= SCF_WHILEM_VISITED_POS;
3680 next = regnext(scan);
3681 nscan = NEXTOPER(NEXTOPER(scan));
3682 minnext = study_chunk(pRExC_state, &nscan, minlenp, &deltanext,
3683 last, &data_fake, stopparen, recursed, NULL, f, depth+1);
3686 FAIL("Variable length lookbehind not implemented");
3688 else if (minnext > (I32)U8_MAX) {
3689 FAIL2("Lookbehind longer than %"UVuf" not implemented", (UV)U8_MAX);
3691 scan->flags = (U8)minnext;
3694 if (data_fake.flags & (SF_HAS_PAR|SF_IN_PAR))
3696 if (data_fake.flags & SF_HAS_EVAL)
3697 data->flags |= SF_HAS_EVAL;
3698 data->whilem_c = data_fake.whilem_c;
3700 if (f & SCF_DO_STCLASS_AND) {
3701 const int was = (data->start_class->flags & ANYOF_EOS);
3703 cl_and(data->start_class, &intrnl);
3705 data->start_class->flags |= ANYOF_EOS;
3708 #if PERL_ENABLE_POSITIVE_ASSERTION_STUDY
3710 /* Positive Lookahead/lookbehind
3711 In this case we can do fixed string optimisation,
3712 but we must be careful about it. Note in the case of
3713 lookbehind the positions will be offset by the minimum
3714 length of the pattern, something we won't know about
3715 until after the recurse.
3717 I32 deltanext, fake = 0;
3719 struct regnode_charclass_class intrnl;
3721 /* We use SAVEFREEPV so that when the full compile
3722 is finished perl will clean up the allocated
3723 minlens when its all done. This was we don't
3724 have to worry about freeing them when we know
3725 they wont be used, which would be a pain.
3728 Newx( minnextp, 1, I32 );
3729 SAVEFREEPV(minnextp);
3732 StructCopy(data, &data_fake, scan_data_t);
3733 if ((flags & SCF_DO_SUBSTR) && data->last_found) {
3736 SCAN_COMMIT(pRExC_state, &data_fake,minlenp);
3737 data_fake.last_found=newSVsv(data->last_found);
3741 data_fake.last_closep = &fake;
3742 data_fake.flags = 0;
3743 data_fake.pos_delta = delta;
3745 data_fake.flags |= SF_IS_INF;
3746 if ( flags & SCF_DO_STCLASS && !scan->flags
3747 && OP(scan) == IFMATCH ) { /* Lookahead */
3748 cl_init(pRExC_state, &intrnl);
3749 data_fake.start_class = &intrnl;
3750 f |= SCF_DO_STCLASS_AND;
3752 if (flags & SCF_WHILEM_VISITED_POS)
3753 f |= SCF_WHILEM_VISITED_POS;
3754 next = regnext(scan);
3755 nscan = NEXTOPER(NEXTOPER(scan));
3757 *minnextp = study_chunk(pRExC_state, &nscan, minnextp, &deltanext,
3758 last, &data_fake, stopparen, recursed, NULL, f,depth+1);
3761 FAIL("Variable length lookbehind not implemented");
3763 else if (*minnextp > (I32)U8_MAX) {
3764 FAIL2("Lookbehind longer than %"UVuf" not implemented", (UV)U8_MAX);
3766 scan->flags = (U8)*minnextp;
3771 if (f & SCF_DO_STCLASS_AND) {
3772 const int was = (data->start_class->flags & ANYOF_EOS);
3774 cl_and(data->start_class, &intrnl);
3776 data->start_class->flags |= ANYOF_EOS;
3779 if (data_fake.flags & (SF_HAS_PAR|SF_IN_PAR))
3781 if (data_fake.flags & SF_HAS_EVAL)
3782 data->flags |= SF_HAS_EVAL;
3783 data->whilem_c = data_fake.whilem_c;
3784 if ((flags & SCF_DO_SUBSTR) && data_fake.last_found) {
3785 if (RExC_rx->minlen<*minnextp)
3786 RExC_rx->minlen=*minnextp;
3787 SCAN_COMMIT(pRExC_state, &data_fake, minnextp);
3788 SvREFCNT_dec(data_fake.last_found);
3790 if ( data_fake.minlen_fixed != minlenp )
3792 data->offset_fixed= data_fake.offset_fixed;
3793 data->minlen_fixed= data_fake.minlen_fixed;
3794 data->lookbehind_fixed+= scan->flags;
3796 if ( data_fake.minlen_float != minlenp )
3798 data->minlen_float= data_fake.minlen_float;
3799 data->offset_float_min=data_fake.offset_float_min;
3800 data->offset_float_max=data_fake.offset_float_max;
3801 data->lookbehind_float+= scan->flags;
3810 else if (OP(scan) == OPEN) {
3811 if (stopparen != (I32)ARG(scan))
3814 else if (OP(scan) == CLOSE) {
3815 if (stopparen == (I32)ARG(scan)) {
3818 if ((I32)ARG(scan) == is_par) {
3819 next = regnext(scan);
3821 if ( next && (OP(next) != WHILEM) && next < last)
3822 is_par = 0; /* Disable optimization */
3825 *(data->last_closep) = ARG(scan);
3827 else if (OP(scan) == EVAL) {
3829 data->flags |= SF_HAS_EVAL;
3831 else if ( PL_regkind[OP(scan)] == ENDLIKE ) {
3832 if (flags & SCF_DO_SUBSTR) {
3833 SCAN_COMMIT(pRExC_state,data,minlenp);
3834 flags &= ~SCF_DO_SUBSTR;
3836 if (data && OP(scan)==ACCEPT) {
3837 data->flags |= SCF_SEEN_ACCEPT;
3842 else if (OP(scan) == LOGICAL && scan->flags == 2) /* Embedded follows */
3844 if (flags & SCF_DO_SUBSTR) {
3845 SCAN_COMMIT(pRExC_state,data,minlenp);
3846 data->longest = &(data->longest_float);
3848 is_inf = is_inf_internal = 1;
3849 if (flags & SCF_DO_STCLASS_OR) /* Allow everything */
3850 cl_anything(pRExC_state, data->start_class);
3851 flags &= ~SCF_DO_STCLASS;
3853 else if (OP(scan) == GPOS) {
3854 if (!(RExC_rx->extflags & RXf_GPOS_FLOAT) &&
3855 !(delta || is_inf || (data && data->pos_delta)))
3857 if (!(RExC_rx->extflags & RXf_ANCH) && (flags & SCF_DO_SUBSTR))
3858 RExC_rx->extflags |= RXf_ANCH_GPOS;
3859 if (RExC_rx->gofs < (U32)min)
3860 RExC_rx->gofs = min;
3862 RExC_rx->extflags |= RXf_GPOS_FLOAT;
3866 #ifdef TRIE_STUDY_OPT
3867 #ifdef FULL_TRIE_STUDY
3868 else if (PL_regkind[OP(scan)] == TRIE) {
3869 /* NOTE - There is similar code to this block above for handling
3870 BRANCH nodes on the initial study. If you change stuff here
3872 regnode *trie_node= scan;
3873 regnode *tail= regnext(scan);
3874 reg_trie_data *trie = (reg_trie_data*)RExC_rxi->data->data[ ARG(scan) ];
3875 I32 max1 = 0, min1 = I32_MAX;
3876 struct regnode_charclass_class accum;
3878 if (flags & SCF_DO_SUBSTR) /* XXXX Add !SUSPEND? */
3879 SCAN_COMMIT(pRExC_state, data,minlenp); /* Cannot merge strings after this. */
3880 if (flags & SCF_DO_STCLASS)
3881 cl_init_zero(pRExC_state, &accum);
3887 const regnode *nextbranch= NULL;
3890 for ( word=1 ; word <= trie->wordcount ; word++)
3892 I32 deltanext=0, minnext=0, f = 0, fake;
3893 struct regnode_charclass_class this_class;
3895 data_fake.flags = 0;
3897 data_fake.whilem_c = data->whilem_c;
3898 data_fake.last_closep = data->last_closep;
3901 data_fake.last_closep = &fake;
3902 data_fake.pos_delta = delta;
3903 if (flags & SCF_DO_STCLASS) {
3904 cl_init(pRExC_state, &this_class);
3905 data_fake.start_class = &this_class;
3906 f = SCF_DO_STCLASS_AND;
3908 if (flags & SCF_WHILEM_VISITED_POS)
3909 f |= SCF_WHILEM_VISITED_POS;
3911 if (trie->jump[word]) {
3913 nextbranch = trie_node + trie->jump[0];
3914 scan= trie_node + trie->jump[word];
3915 /* We go from the jump point to the branch that follows
3916 it. Note this means we need the vestigal unused branches
3917 even though they arent otherwise used.
3919 minnext = study_chunk(pRExC_state, &scan, minlenp,
3920 &deltanext, (regnode *)nextbranch, &data_fake,
3921 stopparen, recursed, NULL, f,depth+1);
3923 if (nextbranch && PL_regkind[OP(nextbranch)]==BRANCH)
3924 nextbranch= regnext((regnode*)nextbranch);
3926 if (min1 > (I32)(minnext + trie->minlen))
3927 min1 = minnext + trie->minlen;
3928 if (max1 < (I32)(minnext + deltanext + trie->maxlen))
3929 max1 = minnext + deltanext + trie->maxlen;
3930 if (deltanext == I32_MAX)
3931 is_inf = is_inf_internal = 1;
3933 if (data_fake.flags & (SF_HAS_PAR|SF_IN_PAR))
3935 if (data_fake.flags & SCF_SEEN_ACCEPT) {
3936 if ( stopmin > min + min1)
3937 stopmin = min + min1;
3938 flags &= ~SCF_DO_SUBSTR;
3940 data->flags |= SCF_SEEN_ACCEPT;
3943 if (data_fake.flags & SF_HAS_EVAL)
3944 data->flags |= SF_HAS_EVAL;
3945 data->whilem_c = data_fake.whilem_c;
3947 if (flags & SCF_DO_STCLASS)
3948 cl_or(pRExC_state, &accum, &this_class);
3951 if (flags & SCF_DO_SUBSTR) {
3952 data->pos_min += min1;
3953 data->pos_delta += max1 - min1;
3954 if (max1 != min1 || is_inf)
3955 data->longest = &(data->longest_float);
3958 delta += max1 - min1;
3959 if (flags & SCF_DO_STCLASS_OR) {
3960 cl_or(pRExC_state, data->start_class, &accum);
3962 cl_and(data->start_class, and_withp);
3963 flags &= ~SCF_DO_STCLASS;
3966 else if (flags & SCF_DO_STCLASS_AND) {
3968 cl_and(data->start_class, &accum);
3969 flags &= ~SCF_DO_STCLASS;
3972 /* Switch to OR mode: cache the old value of
3973 * data->start_class */
3975 StructCopy(data->start_class, and_withp,
3976 struct regnode_charclass_class);
3977 flags &= ~SCF_DO_STCLASS_AND;
3978 StructCopy(&accum, data->start_class,
3979 struct regnode_charclass_class);
3980 flags |= SCF_DO_STCLASS_OR;
3981 data->start_class->flags |= ANYOF_EOS;
3988 else if (PL_regkind[OP(scan)] == TRIE) {
3989 reg_trie_data *trie = (reg_trie_data*)RExC_rxi->data->data[ ARG(scan) ];
3992 min += trie->minlen;
3993 delta += (trie->maxlen - trie->minlen);
3994 flags &= ~SCF_DO_STCLASS; /* xxx */
3995 if (flags & SCF_DO_SUBSTR) {
3996 SCAN_COMMIT(pRExC_state,data,minlenp); /* Cannot expect anything... */
3997 data->pos_min += trie->minlen;
3998 data->pos_delta += (trie->maxlen - trie->minlen);
3999 if (trie->maxlen != trie->minlen)
4000 data->longest = &(data->longest_float);
4002 if (trie->jump) /* no more substrings -- for now /grr*/
4003 flags &= ~SCF_DO_SUBSTR;
4005 #endif /* old or new */
4006 #endif /* TRIE_STUDY_OPT */
4008 /* Else: zero-length, ignore. */
4009 scan = regnext(scan);
4014 stopparen = frame->stop;
4015 frame = frame->prev;
4016 goto fake_study_recurse;
4021 DEBUG_STUDYDATA("pre-fin:",data,depth);
4024 *deltap = is_inf_internal ? I32_MAX : delta;
4025 if (flags & SCF_DO_SUBSTR && is_inf)
4026 data->pos_delta = I32_MAX - data->pos_min;
4027 if (is_par > (I32)U8_MAX)
4029 if (is_par && pars==1 && data) {
4030 data->flags |= SF_IN_PAR;
4031 data->flags &= ~SF_HAS_PAR;
4033 else if (pars && data) {
4034 data->flags |= SF_HAS_PAR;
4035 data->flags &= ~SF_IN_PAR;
4037 if (flags & SCF_DO_STCLASS_OR)
4038 cl_and(data->start_class, and_withp);
4039 if (flags & SCF_TRIE_RESTUDY)
4040 data->flags |= SCF_TRIE_RESTUDY;
4042 DEBUG_STUDYDATA("post-fin:",data,depth);
4044 return min < stopmin ? min : stopmin;
4048 S_add_data(RExC_state_t *pRExC_state, U32 n, const char *s)
4050 U32 count = RExC_rxi->data ? RExC_rxi->data->count : 0;
4052 Renewc(RExC_rxi->data,
4053 sizeof(*RExC_rxi->data) + sizeof(void*) * (count + n - 1),
4054 char, struct reg_data);
4056 Renew(RExC_rxi->data->what, count + n, U8);
4058 Newx(RExC_rxi->data->what, n, U8);
4059 RExC_rxi->data->count = count + n;
4060 Copy(s, RExC_rxi->data->what + count, n, U8);
4064 /*XXX: todo make this not included in a non debugging perl */
4065 #ifndef PERL_IN_XSUB_RE
4067 Perl_reginitcolors(pTHX)
4070 const char * const s = PerlEnv_getenv("PERL_RE_COLORS");
4072 char *t = savepv(s);
4076 t = strchr(t, '\t');
4082 PL_colors[i] = t = (char *)"";
4087 PL_colors[i++] = (char *)"";
4094 #ifdef TRIE_STUDY_OPT
4095 #define CHECK_RESTUDY_GOTO \
4097 (data.flags & SCF_TRIE_RESTUDY) \
4101 #define CHECK_RESTUDY_GOTO
4105 - pregcomp - compile a regular expression into internal code
4107 * We can't allocate space until we know how big the compiled form will be,
4108 * but we can't compile it (and thus know how big it is) until we've got a
4109 * place to put the code. So we cheat: we compile it twice, once with code
4110 * generation turned off and size counting turned on, and once "for real".
4111 * This also means that we don't allocate space until we are sure that the
4112 * thing really will compile successfully, and we never have to move the
4113 * code and thus invalidate pointers into it. (Note that it has to be in
4114 * one piece because free() must be able to free it all.) [NB: not true in perl]
4116 * Beware that the optimization-preparation code in here knows about some
4117 * of the structure of the compiled regexp. [I'll say.]
4122 #ifndef PERL_IN_XSUB_RE
4123 #define RE_ENGINE_PTR &PL_core_reg_engine
4125 extern const struct regexp_engine my_reg_engine;
4126 #define RE_ENGINE_PTR &my_reg_engine
4129 #ifndef PERL_IN_XSUB_RE
4131 Perl_pregcomp(pTHX_ const SV * const pattern, const U32 flags)
4134 HV * const table = GvHV(PL_hintgv);
4135 /* Dispatch a request to compile a regexp to correct
4138 SV **ptr= hv_fetchs(table, "regcomp", FALSE);
4139 GET_RE_DEBUG_FLAGS_DECL;
4140 if (ptr && SvIOK(*ptr) && SvIV(*ptr)) {
4141 const regexp_engine *eng=INT2PTR(regexp_engine*,SvIV(*ptr));
4143 PerlIO_printf(Perl_debug_log, "Using engine %"UVxf"\n",
4146 return CALLREGCOMP_ENG(eng, pattern, flags);
4149 return Perl_re_compile(aTHX_ pattern, flags);
4154 Perl_re_compile(pTHX_ const SV * const pattern, U32 pm_flags)
4159 register regexp_internal *ri;
4161 char* exp = SvPV((SV*)pattern, plen);
4162 char* xend = exp + plen;
4169 RExC_state_t RExC_state;
4170 RExC_state_t * const pRExC_state = &RExC_state;
4171 #ifdef TRIE_STUDY_OPT
4173 RExC_state_t copyRExC_state;
4175 GET_RE_DEBUG_FLAGS_DECL;
4176 DEBUG_r(if (!PL_colorset) reginitcolors());
4178 RExC_utf8 = RExC_orig_utf8 = SvUTF8(pattern);
4181 SV *dsv= sv_newmortal();
4182 RE_PV_QUOTED_DECL(s, RExC_utf8,
4183 dsv, exp, plen, 60);
4184 PerlIO_printf(Perl_debug_log, "%sCompiling REx%s %s\n",
4185 PL_colors[4],PL_colors[5],s);
4190 RExC_flags = pm_flags;
4194 RExC_seen_zerolen = *exp == '^' ? -1 : 0;
4195 RExC_seen_evals = 0;
4198 /* First pass: determine size, legality. */
4206 RExC_emit = &PL_regdummy;
4207 RExC_whilem_seen = 0;
4208 RExC_charnames = NULL;
4209 RExC_open_parens = NULL;
4210 RExC_close_parens = NULL;
4212 RExC_paren_names = NULL;
4214 RExC_paren_name_list = NULL;
4216 RExC_recurse = NULL;
4217 RExC_recurse_count = 0;
4219 #if 0 /* REGC() is (currently) a NOP at the first pass.
4220 * Clever compilers notice this and complain. --jhi */
4221 REGC((U8)REG_MAGIC, (char*)RExC_emit);
4223 DEBUG_PARSE_r(PerlIO_printf(Perl_debug_log, "Starting first pass (sizing)\n"));
4224 if (reg(pRExC_state, 0, &flags,1) == NULL) {
4225 RExC_precomp = NULL;
4228 if (RExC_utf8 && !RExC_orig_utf8) {
4229 /* It's possible to write a regexp in ascii that represents Unicode
4230 codepoints outside of the byte range, such as via \x{100}. If we
4231 detect such a sequence we have to convert the entire pattern to utf8
4232 and then recompile, as our sizing calculation will have been based
4233 on 1 byte == 1 character, but we will need to use utf8 to encode
4234 at least some part of the pattern, and therefore must convert the whole
4236 XXX: somehow figure out how to make this less expensive...
4239 DEBUG_PARSE_r(PerlIO_printf(Perl_debug_log,
4240 "UTF8 mismatch! Converting to utf8 for resizing and compile\n"));
4241 exp = (char*)Perl_bytes_to_utf8(aTHX_ (U8*)exp, &len);
4243 RExC_orig_utf8 = RExC_utf8;
4245 goto redo_first_pass;
4248 PerlIO_printf(Perl_debug_log,
4249 "Required size %"IVdf" nodes\n"
4250 "Starting second pass (creation)\n",
4253 RExC_lastparse=NULL;
4255 /* Small enough for pointer-storage convention?
4256 If extralen==0, this means that we will not need long jumps. */
4257 if (RExC_size >= 0x10000L && RExC_extralen)
4258 RExC_size += RExC_extralen;
4261 if (RExC_whilem_seen > 15)
4262 RExC_whilem_seen = 15;
4264 /* Allocate space and zero-initialize. Note, the two step process
4265 of zeroing when in debug mode, thus anything assigned has to
4266 happen after that */
4267 rx = (REGEXP*) newSV_type(SVt_REGEXP);
4268 r = (struct regexp*)SvANY(rx);
4269 Newxc(ri, sizeof(regexp_internal) + (unsigned)RExC_size * sizeof(regnode),
4270 char, regexp_internal);
4271 if ( r == NULL || ri == NULL )
4272 FAIL("Regexp out of space");
4274 /* avoid reading uninitialized memory in DEBUGGING code in study_chunk() */
4275 Zero(ri, sizeof(regexp_internal) + (unsigned)RExC_size * sizeof(regnode), char);
4277 /* bulk initialize base fields with 0. */
4278 Zero(ri, sizeof(regexp_internal), char);
4281 /* non-zero initialization begins here */
4283 r->engine= RE_ENGINE_PTR;
4284 r->extflags = pm_flags;
4286 bool has_p = ((r->extflags & RXf_PMf_KEEPCOPY) == RXf_PMf_KEEPCOPY);
4287 bool has_minus = ((r->extflags & RXf_PMf_STD_PMMOD) != RXf_PMf_STD_PMMOD);
4288 bool has_runon = ((RExC_seen & REG_SEEN_RUN_ON_COMMENT)==REG_SEEN_RUN_ON_COMMENT);
4289 U16 reganch = (U16)((r->extflags & RXf_PMf_STD_PMMOD)
4290 >> RXf_PMf_STD_PMMOD_SHIFT);
4291 const char *fptr = STD_PAT_MODS; /*"msix"*/
4293 const STRLEN wraplen = plen + has_minus + has_p + has_runon
4294 + (sizeof(STD_PAT_MODS) - 1)
4295 + (sizeof("(?:)") - 1);
4297 p = sv_grow((SV *)rx, wraplen + 1);
4298 SvCUR_set(rx, wraplen);
4300 SvFLAGS(rx) |= SvUTF8(pattern);
4303 *p++ = KEEPCOPY_PAT_MOD; /*'p'*/
4305 char *r = p + (sizeof(STD_PAT_MODS) - 1) + has_minus - 1;
4306 char *colon = r + 1;
4309 while((ch = *fptr++)) {
4323 Copy(RExC_precomp, p, plen, char);
4324 assert ((RX_WRAPPED(rx) - p) < 16);
4325 r->pre_prefix = p - RX_WRAPPED(rx);
4334 r->nparens = RExC_npar - 1; /* set early to validate backrefs */
4336 if (RExC_seen & REG_SEEN_RECURSE) {
4337 Newxz(RExC_open_parens, RExC_npar,regnode *);
4338 SAVEFREEPV(RExC_open_parens);
4339 Newxz(RExC_close_parens,RExC_npar,regnode *);
4340 SAVEFREEPV(RExC_close_parens);
4343 /* Useful during FAIL. */
4344 #ifdef RE_TRACK_PATTERN_OFFSETS
4345 Newxz(ri->u.offsets, 2*RExC_size+1, U32); /* MJD 20001228 */
4346 DEBUG_OFFSETS_r(PerlIO_printf(Perl_debug_log,
4347 "%s %"UVuf" bytes for offset annotations.\n",
4348 ri->u.offsets ? "Got" : "Couldn't get",
4349 (UV)((2*RExC_size+1) * sizeof(U32))));
4351 SetProgLen(ri,RExC_size);
4356 /* Second pass: emit code. */
4357 RExC_flags = pm_flags; /* don't let top level (?i) bleed */
4362 RExC_emit_start = ri->program;
4363 RExC_emit = ri->program;
4364 RExC_emit_bound = ri->program + RExC_size + 1;
4366 /* Store the count of eval-groups for security checks: */
4367 RExC_rx->seen_evals = RExC_seen_evals;
4368 REGC((U8)REG_MAGIC, (char*) RExC_emit++);
4369 if (reg(pRExC_state, 0, &flags,1) == NULL) {
4373 /* XXXX To minimize changes to RE engine we always allocate
4374 3-units-long substrs field. */
4375 Newx(r->substrs, 1, struct reg_substr_data);
4376 if (RExC_recurse_count) {
4377 Newxz(RExC_recurse,RExC_recurse_count,regnode *);
4378 SAVEFREEPV(RExC_recurse);
4382 r->minlen = minlen = sawplus = sawopen = 0;
4383 Zero(r->substrs, 1, struct reg_substr_data);
4385 #ifdef TRIE_STUDY_OPT
4388 DEBUG_OPTIMISE_r(PerlIO_printf(Perl_debug_log,"Restudying\n"));
4390 RExC_state = copyRExC_state;
4391 if (seen & REG_TOP_LEVEL_BRANCHES)
4392 RExC_seen |= REG_TOP_LEVEL_BRANCHES;
4394 RExC_seen &= ~REG_TOP_LEVEL_BRANCHES;
4395 if (data.last_found) {
4396 SvREFCNT_dec(data.longest_fixed);
4397 SvREFCNT_dec(data.longest_float);
4398 SvREFCNT_dec(data.last_found);
4400 StructCopy(&zero_scan_data, &data, scan_data_t);
4402 StructCopy(&zero_scan_data, &data, scan_data_t);
4403 copyRExC_state = RExC_state;
4406 StructCopy(&zero_scan_data, &data, scan_data_t);
4409 /* Dig out information for optimizations. */
4410 r->extflags = RExC_flags; /* was pm_op */
4411 /*dmq: removed as part of de-PMOP: pm->op_pmflags = RExC_flags; */
4414 SvUTF8_on(rx); /* Unicode in it? */
4415 ri->regstclass = NULL;
4416 if (RExC_naughty >= 10) /* Probably an expensive pattern. */
4417 r->intflags |= PREGf_NAUGHTY;
4418 scan = ri->program + 1; /* First BRANCH. */
4420 /* testing for BRANCH here tells us whether there is "must appear"
4421 data in the pattern. If there is then we can use it for optimisations */
4422 if (!(RExC_seen & REG_TOP_LEVEL_BRANCHES)) { /* Only one top-level choice. */
4424 STRLEN longest_float_length, longest_fixed_length;
4425 struct regnode_charclass_class ch_class; /* pointed to by data */
4427 I32 last_close = 0; /* pointed to by data */
4428 regnode *first= scan;
4429 regnode *first_next= regnext(first);
4431 /* Skip introductions and multiplicators >= 1. */
4432 while ((OP(first) == OPEN && (sawopen = 1)) ||
4433 /* An OR of *one* alternative - should not happen now. */
4434 (OP(first) == BRANCH && OP(first_next) != BRANCH) ||
4435 /* for now we can't handle lookbehind IFMATCH*/
4436 (OP(first) == IFMATCH && !first->flags) ||
4437 (OP(first) == PLUS) ||
4438 (OP(first) == MINMOD) ||
4439 /* An {n,m} with n>0 */
4440 (PL_regkind[OP(first)] == CURLY && ARG1(first) > 0) ||
4441 (OP(first) == NOTHING && PL_regkind[OP(first_next)] != END ))
4444 if (OP(first) == PLUS)
4447 first += regarglen[OP(first)];
4448 if (OP(first) == IFMATCH) {
4449 first = NEXTOPER(first);
4450 first += EXTRA_STEP_2ARGS;
4451 } else /* XXX possible optimisation for /(?=)/ */
4452 first = NEXTOPER(first);
4453 first_next= regnext(first);
4456 /* Starting-point info. */
4458 DEBUG_PEEP("first:",first,0);
4459 /* Ignore EXACT as we deal with it later. */
4460 if (PL_regkind[OP(first)] == EXACT) {
4461 if (OP(first) == EXACT)
4462 NOOP; /* Empty, get anchored substr later. */
4463 else if ((OP(first) == EXACTF || OP(first) == EXACTFL))
4464 ri->regstclass = first;
4467 else if (PL_regkind[OP(first)] == TRIE &&
4468 ((reg_trie_data *)ri->data->data[ ARG(first) ])->minlen>0)
4471 /* this can happen only on restudy */
4472 if ( OP(first) == TRIE ) {
4473 struct regnode_1 *trieop = (struct regnode_1 *)
4474 PerlMemShared_calloc(1, sizeof(struct regnode_1));
4475 StructCopy(first,trieop,struct regnode_1);
4476 trie_op=(regnode *)trieop;
4478 struct regnode_charclass *trieop = (struct regnode_charclass *)
4479 PerlMemShared_calloc(1, sizeof(struct regnode_charclass));
4480 StructCopy(first,trieop,struct regnode_charclass);
4481 trie_op=(regnode *)trieop;
4484 make_trie_failtable(pRExC_state, (regnode *)first, trie_op, 0);
4485 ri->regstclass = trie_op;
4488 else if (strchr((const char*)PL_simple,OP(first)))
4489 ri->regstclass = first;
4490 else if (PL_regkind[OP(first)] == BOUND ||
4491 PL_regkind[OP(first)] == NBOUND)
4492 ri->regstclass = first;
4493 else if (PL_regkind[OP(first)] == BOL) {
4494 r->extflags |= (OP(first) == MBOL
4496 : (OP(first) == SBOL
4499 first = NEXTOPER(first);
4502 else if (OP(first) == GPOS) {
4503 r->extflags |= RXf_ANCH_GPOS;
4504 first = NEXTOPER(first);
4507 else if ((!sawopen || !RExC_sawback) &&
4508 (OP(first) == STAR &&
4509 PL_regkind[OP(NEXTOPER(first))] == REG_ANY) &&
4510 !(r->extflags & RXf_ANCH) && !(RExC_seen & REG_SEEN_EVAL))
4512 /* turn .* into ^.* with an implied $*=1 */
4514 (OP(NEXTOPER(first)) == REG_ANY)
4517 r->extflags |= type;
4518 r->intflags |= PREGf_IMPLICIT;
4519 first = NEXTOPER(first);
4522 if (sawplus && (!sawopen || !RExC_sawback)
4523 && !(RExC_seen & REG_SEEN_EVAL)) /* May examine pos and $& */
4524 /* x+ must match at the 1st pos of run of x's */
4525 r->intflags |= PREGf_SKIP;
4527 /* Scan is after the zeroth branch, first is atomic matcher. */
4528 #ifdef TRIE_STUDY_OPT
4531 PerlIO_printf(Perl_debug_log, "first at %"IVdf"\n",
4532 (IV)(first - scan + 1))
4536 PerlIO_printf(Perl_debug_log, "first at %"IVdf"\n",
4537 (IV)(first - scan + 1))
4543 * If there's something expensive in the r.e., find the
4544 * longest literal string that must appear and make it the
4545 * regmust. Resolve ties in favor of later strings, since
4546 * the regstart check works with the beginning of the r.e.
4547 * and avoiding duplication strengthens checking. Not a
4548 * strong reason, but sufficient in the absence of others.
4549 * [Now we resolve ties in favor of the earlier string if
4550 * it happens that c_offset_min has been invalidated, since the
4551 * earlier string may buy us something the later one won't.]
4554 data.longest_fixed = newSVpvs("");
4555 data.longest_float = newSVpvs("");
4556 data.last_found = newSVpvs("");
4557 data.longest = &(data.longest_fixed);
4559 if (!ri->regstclass) {
4560 cl_init(pRExC_state, &ch_class);
4561 data.start_class = &ch_class;
4562 stclass_flag = SCF_DO_STCLASS_AND;
4563 } else /* XXXX Check for BOUND? */
4565 data.last_closep = &last_close;
4567 minlen = study_chunk(pRExC_state, &first, &minlen, &fake, scan + RExC_size, /* Up to end */
4568 &data, -1, NULL, NULL,
4569 SCF_DO_SUBSTR | SCF_WHILEM_VISITED_POS | stclass_flag,0);
4575 if ( RExC_npar == 1 && data.longest == &(data.longest_fixed)
4576 && data.last_start_min == 0 && data.last_end > 0
4577 && !RExC_seen_zerolen
4578 && !(RExC_seen & REG_SEEN_VERBARG)
4579 && (!(RExC_seen & REG_SEEN_GPOS) || (r->extflags & RXf_ANCH_GPOS)))
4580 r->extflags |= RXf_CHECK_ALL;
4581 scan_commit(pRExC_state, &data,&minlen,0);
4582 SvREFCNT_dec(data.last_found);
4584 /* Note that code very similar to this but for anchored string
4585 follows immediately below, changes may need to be made to both.
4588 longest_float_length = CHR_SVLEN(data.longest_float);
4589 if (longest_float_length
4590 || (data.flags & SF_FL_BEFORE_EOL
4591 && (!(data.flags & SF_FL_BEFORE_MEOL)
4592 || (RExC_flags & RXf_PMf_MULTILINE))))
4596 if (SvCUR(data.longest_fixed) /* ok to leave SvCUR */
4597 && data.offset_fixed == data.offset_float_min
4598 && SvCUR(data.longest_fixed) == SvCUR(data.longest_float))
4599 goto remove_float; /* As in (a)+. */
4601 /* copy the information about the longest float from the reg_scan_data
4602 over to the program. */
4603 if (SvUTF8(data.longest_float)) {
4604 r->float_utf8 = data.longest_float;
4605 r->float_substr = NULL;
4607 r->float_substr = data.longest_float;
4608 r->float_utf8 = NULL;
4610 /* float_end_shift is how many chars that must be matched that
4611 follow this item. We calculate it ahead of time as once the
4612 lookbehind offset is added in we lose the ability to correctly
4614 ml = data.minlen_float ? *(data.minlen_float)
4615 : (I32)longest_float_length;
4616 r->float_end_shift = ml - data.offset_float_min
4617 - longest_float_length + (SvTAIL(data.longest_float) != 0)
4618 + data.lookbehind_float;
4619 r->float_min_offset = data.offset_float_min - data.lookbehind_float;
4620 r->float_max_offset = data.offset_float_max;
4621 if (data.offset_float_max < I32_MAX) /* Don't offset infinity */
4622 r->float_max_offset -= data.lookbehind_float;
4624 t = (data.flags & SF_FL_BEFORE_EOL /* Can't have SEOL and MULTI */
4625 && (!(data.flags & SF_FL_BEFORE_MEOL)
4626 || (RExC_flags & RXf_PMf_MULTILINE)));
4627 fbm_compile(data.longest_float, t ? FBMcf_TAIL : 0);
4631 r->float_substr = r->float_utf8 = NULL;
4632 SvREFCNT_dec(data.longest_float);
4633 longest_float_length = 0;
4636 /* Note that code very similar to this but for floating string
4637 is immediately above, changes may need to be made to both.
4640 longest_fixed_length = CHR_SVLEN(data.longest_fixed);
4641 if (longest_fixed_length
4642 || (data.flags & SF_FIX_BEFORE_EOL /* Cannot have SEOL and MULTI */
4643 && (!(data.flags & SF_FIX_BEFORE_MEOL)
4644 || (RExC_flags & RXf_PMf_MULTILINE))))
4648 /* copy the information about the longest fixed
4649 from the reg_scan_data over to the program. */
4650 if (SvUTF8(data.longest_fixed)) {
4651 r->anchored_utf8 = data.longest_fixed;
4652 r->anchored_substr = NULL;
4654 r->anchored_substr = data.longest_fixed;
4655 r->anchored_utf8 = NULL;
4657 /* fixed_end_shift is how many chars that must be matched that
4658 follow this item. We calculate it ahead of time as once the
4659 lookbehind offset is added in we lose the ability to correctly
4661 ml = data.minlen_fixed ? *(data.minlen_fixed)
4662 : (I32)longest_fixed_length;
4663 r->anchored_end_shift = ml - data.offset_fixed
4664 - longest_fixed_length + (SvTAIL(data.longest_fixed) != 0)
4665 + data.lookbehind_fixed;
4666 r->anchored_offset = data.offset_fixed - data.lookbehind_fixed;
4668 t = (data.flags & SF_FIX_BEFORE_EOL /* Can't have SEOL and MULTI */
4669 && (!(data.flags & SF_FIX_BEFORE_MEOL)
4670 || (RExC_flags & RXf_PMf_MULTILINE)));
4671 fbm_compile(data.longest_fixed, t ? FBMcf_TAIL : 0);
4674 r->anchored_substr = r->anchored_utf8 = NULL;
4675 SvREFCNT_dec(data.longest_fixed);
4676 longest_fixed_length = 0;
4679 && (OP(ri->regstclass) == REG_ANY || OP(ri->regstclass) == SANY))
4680 ri->regstclass = NULL;
4681 if ((!(r->anchored_substr || r->anchored_utf8) || r->anchored_offset)
4683 && !(data.start_class->flags & ANYOF_EOS)
4684 && !cl_is_anything(data.start_class))
4686 const U32 n = add_data(pRExC_state, 1, "f");
4688 Newx(RExC_rxi->data->data[n], 1,
4689 struct regnode_charclass_class);
4690 StructCopy(data.start_class,
4691 (struct regnode_charclass_class*)RExC_rxi->data->data[n],
4692 struct regnode_charclass_class);
4693 ri->regstclass = (regnode*)RExC_rxi->data->data[n];
4694 r->intflags &= ~PREGf_SKIP; /* Used in find_byclass(). */
4695 DEBUG_COMPILE_r({ SV *sv = sv_newmortal();
4696 regprop(r, sv, (regnode*)data.start_class);
4697 PerlIO_printf(Perl_debug_log,
4698 "synthetic stclass \"%s\".\n",
4699 SvPVX_const(sv));});
4702 /* A temporary algorithm prefers floated substr to fixed one to dig more info. */
4703 if (longest_fixed_length > longest_float_length) {
4704 r->check_end_shift = r->anchored_end_shift;
4705 r->check_substr = r->anchored_substr;
4706 r->check_utf8 = r->anchored_utf8;
4707 r->check_offset_min = r->check_offset_max = r->anchored_offset;
4708 if (r->extflags & RXf_ANCH_SINGLE)
4709 r->extflags |= RXf_NOSCAN;
4712 r->check_end_shift = r->float_end_shift;
4713 r->check_substr = r->float_substr;
4714 r->check_utf8 = r->float_utf8;
4715 r->check_offset_min = r->float_min_offset;
4716 r->check_offset_max = r->float_max_offset;
4718 /* XXXX Currently intuiting is not compatible with ANCH_GPOS.
4719 This should be changed ASAP! */
4720 if ((r->check_substr || r->check_utf8) && !(r->extflags & RXf_ANCH_GPOS)) {
4721 r->extflags |= RXf_USE_INTUIT;
4722 if (SvTAIL(r->check_substr ? r->check_substr : r->check_utf8))
4723 r->extflags |= RXf_INTUIT_TAIL;
4725 /* XXX Unneeded? dmq (shouldn't as this is handled elsewhere)
4726 if ( (STRLEN)minlen < longest_float_length )
4727 minlen= longest_float_length;
4728 if ( (STRLEN)minlen < longest_fixed_length )
4729 minlen= longest_fixed_length;
4733 /* Several toplevels. Best we can is to set minlen. */
4735 struct regnode_charclass_class ch_class;
4738 DEBUG_PARSE_r(PerlIO_printf(Perl_debug_log, "\nMulti Top Level\n"));
4740 scan = ri->program + 1;
4741 cl_init(pRExC_state, &ch_class);
4742 data.start_class = &ch_class;
4743 data.last_closep = &last_close;
4746 minlen = study_chunk(pRExC_state, &scan, &minlen, &fake, scan + RExC_size,
4747 &data, -1, NULL, NULL, SCF_DO_STCLASS_AND|SCF_WHILEM_VISITED_POS,0);
4751 r->check_substr = r->check_utf8 = r->anchored_substr = r->anchored_utf8
4752 = r->float_substr = r->float_utf8 = NULL;
4753 if (!(data.start_class->flags & ANYOF_EOS)
4754 && !cl_is_anything(data.start_class))
4756 const U32 n = add_data(pRExC_state, 1, "f");
4758 Newx(RExC_rxi->data->data[n], 1,
4759 struct regnode_charclass_class);
4760 StructCopy(data.start_class,
4761 (struct regnode_charclass_class*)RExC_rxi->data->data[n],
4762 struct regnode_charclass_class);
4763 ri->regstclass = (regnode*)RExC_rxi->data->data[n];
4764 r->intflags &= ~PREGf_SKIP; /* Used in find_byclass(). */
4765 DEBUG_COMPILE_r({ SV* sv = sv_newmortal();
4766 regprop(r, sv, (regnode*)data.start_class);
4767 PerlIO_printf(Perl_debug_log,
4768 "synthetic stclass \"%s\".\n",
4769 SvPVX_const(sv));});
4773 /* Guard against an embedded (?=) or (?<=) with a longer minlen than
4774 the "real" pattern. */
4776 PerlIO_printf(Perl_debug_log,"minlen: %"IVdf" r->minlen:%"IVdf"\n",
4777 (IV)minlen, (IV)r->minlen);
4779 r->minlenret = minlen;
4780 if (r->minlen < minlen)
4783 if (RExC_seen & REG_SEEN_GPOS)
4784 r->extflags |= RXf_GPOS_SEEN;
4785 if (RExC_seen & REG_SEEN_LOOKBEHIND)
4786 r->extflags |= RXf_LOOKBEHIND_SEEN;
4787 if (RExC_seen & REG_SEEN_EVAL)
4788 r->extflags |= RXf_EVAL_SEEN;
4789 if (RExC_seen & REG_SEEN_CANY)
4790 r->extflags |= RXf_CANY_SEEN;
4791 if (RExC_seen & REG_SEEN_VERBARG)
4792 r->intflags |= PREGf_VERBARG_SEEN;
4793 if (RExC_seen & REG_SEEN_CUTGROUP)
4794 r->intflags |= PREGf_CUTGROUP_SEEN;
4795 if (RExC_paren_names)
4796 RXp_PAREN_NAMES(r) = (HV*)SvREFCNT_inc(RExC_paren_names);
4798 RXp_PAREN_NAMES(r) = NULL;
4800 #ifdef STUPID_PATTERN_CHECKS
4801 if (RX_PRELEN(rx) == 0)
4802 r->extflags |= RXf_NULL;
4803 if (r->extflags & RXf_SPLIT && RX_PRELEN(rx) == 1 && RX_PRECOMP(rx)[0] == ' ')
4804 /* XXX: this should happen BEFORE we compile */
4805 r->extflags |= (RXf_SKIPWHITE|RXf_WHITE);
4806 else if (RX_PRELEN(rx) == 3 && memEQ("\\s+", RX_PRECOMP(rx), 3))
4807 r->extflags |= RXf_WHITE;
4808 else if (RX_PRELEN(rx) == 1 && RXp_PRECOMP(rx)[0] == '^')
4809 r->extflags |= RXf_START_ONLY;
4811 if (r->extflags & RXf_SPLIT && RX_PRELEN(rx) == 1 && RX_PRECOMP(rx)[0] == ' ')
4812 /* XXX: this should happen BEFORE we compile */
4813 r->extflags |= (RXf_SKIPWHITE|RXf_WHITE);
4815 regnode *first = ri->program + 1;
4817 U8 nop = OP(NEXTOPER(first));
4819 if (PL_regkind[fop] == NOTHING && nop == END)
4820 r->extflags |= RXf_NULL;
4821 else if (PL_regkind[fop] == BOL && nop == END)
4822 r->extflags |= RXf_START_ONLY;
4823 else if (fop == PLUS && nop ==SPACE && OP(regnext(first))==END)
4824 r->extflags |= RXf_WHITE;
4828 if (RExC_paren_names) {
4829 ri->name_list_idx = add_data( pRExC_state, 1, "p" );
4830 ri->data->data[ri->name_list_idx] = (void*)SvREFCNT_inc(RExC_paren_name_list);
4833 ri->name_list_idx = 0;
4835 if (RExC_recurse_count) {
4836 for ( ; RExC_recurse_count ; RExC_recurse_count-- ) {
4837 const regnode *scan = RExC_recurse[RExC_recurse_count-1];
4838 ARG2L_SET( scan, RExC_open_parens[ARG(scan)-1] - scan );
4841 Newxz(r->offs, RExC_npar, regexp_paren_pair);
4842 /* assume we don't need to swap parens around before we match */
4845 PerlIO_printf(Perl_debug_log,"Final program:\n");
4848 #ifdef RE_TRACK_PATTERN_OFFSETS
4849 DEBUG_OFFSETS_r(if (ri->u.offsets) {
4850 const U32 len = ri->u.offsets[0];
4852 GET_RE_DEBUG_FLAGS_DECL;
4853 PerlIO_printf(Perl_debug_log, "Offsets: [%"UVuf"]\n\t", (UV)ri->u.offsets[0]);
4854 for (i = 1; i <= len; i++) {
4855 if (ri->u.offsets[i*2-1] || ri->u.offsets[i*2])
4856 PerlIO_printf(Perl_debug_log, "%"UVuf":%"UVuf"[%"UVuf"] ",
4857 (UV)i, (UV)ri->u.offsets[i*2-1], (UV)ri->u.offsets[i*2]);
4859 PerlIO_printf(Perl_debug_log, "\n");
4865 #undef RE_ENGINE_PTR
4869 Perl_reg_named_buff(pTHX_ REGEXP * const rx, SV * const key, SV * const value,
4872 PERL_UNUSED_ARG(value);
4874 if (flags & RXapif_FETCH) {
4875 return reg_named_buff_fetch(rx, key, flags);
4876 } else if (flags & (RXapif_STORE | RXapif_DELETE | RXapif_CLEAR)) {
4877 Perl_croak(aTHX_ PL_no_modify);
4879 } else if (flags & RXapif_EXISTS) {
4880 return reg_named_buff_exists(rx, key, flags)
4883 } else if (flags & RXapif_REGNAMES) {
4884 return reg_named_buff_all(rx, flags);
4885 } else if (flags & (RXapif_SCALAR | RXapif_REGNAMES_COUNT)) {
4886 return reg_named_buff_scalar(rx, flags);
4888 Perl_croak(aTHX_ "panic: Unknown flags %d in named_buff", (int)flags);
4894 Perl_reg_named_buff_iter(pTHX_ REGEXP * const rx, const SV * const lastkey,
4897 PERL_UNUSED_ARG(lastkey);
4899 if (flags & RXapif_FIRSTKEY)
4900 return reg_named_buff_firstkey(rx, flags);
4901 else if (flags & RXapif_NEXTKEY)
4902 return reg_named_buff_nextkey(rx, flags);
4904 Perl_croak(aTHX_ "panic: Unknown flags %d in named_buff_iter", (int)flags);
4910 Perl_reg_named_buff_fetch(pTHX_ REGEXP * const r, SV * const namesv,
4913 AV *retarray = NULL;
4915 struct regexp *const rx = (struct regexp *)SvANY(r);
4916 if (flags & RXapif_ALL)
4919 if (rx && RXp_PAREN_NAMES(rx)) {
4920 HE *he_str = hv_fetch_ent( RXp_PAREN_NAMES(rx), namesv, 0, 0 );
4923 SV* sv_dat=HeVAL(he_str);
4924 I32 *nums=(I32*)SvPVX(sv_dat);
4925 for ( i=0; i<SvIVX(sv_dat); i++ ) {
4926 if ((I32)(rx->nparens) >= nums[i]
4927 && rx->offs[nums[i]].start != -1
4928 && rx->offs[nums[i]].end != -1)
4931 CALLREG_NUMBUF_FETCH(r,nums[i],ret);
4935 ret = newSVsv(&PL_sv_undef);
4938 SvREFCNT_inc_simple_void(ret);
4939 av_push(retarray, ret);
4943 return newRV((SV*)retarray);
4950 Perl_reg_named_buff_exists(pTHX_ REGEXP * const r, SV * const key,
4953 struct regexp *const rx = (struct regexp *)SvANY(r);
4954 if (rx && RXp_PAREN_NAMES(rx)) {
4955 if (flags & RXapif_ALL) {
4956 return hv_exists_ent(RXp_PAREN_NAMES(rx), key, 0);
4958 SV *sv = CALLREG_NAMED_BUFF_FETCH(r, key, flags);
4972 Perl_reg_named_buff_firstkey(pTHX_ REGEXP * const r, const U32 flags)
4974 struct regexp *const rx = (struct regexp *)SvANY(r);
4975 if ( rx && RXp_PAREN_NAMES(rx) ) {
4976 (void)hv_iterinit(RXp_PAREN_NAMES(rx));
4978 return CALLREG_NAMED_BUFF_NEXTKEY(r, NULL, flags & ~RXapif_FIRSTKEY);
4985 Perl_reg_named_buff_nextkey(pTHX_ REGEXP * const r, const U32 flags)
4987 struct regexp *const rx = (struct regexp *)SvANY(r);
4988 if (rx && RXp_PAREN_NAMES(rx)) {
4989 HV *hv = RXp_PAREN_NAMES(rx);
4991 while ( (temphe = hv_iternext_flags(hv,0)) ) {
4994 SV* sv_dat = HeVAL(temphe);
4995 I32 *nums = (I32*)SvPVX(sv_dat);
4996 for ( i = 0; i < SvIVX(sv_dat); i++ ) {
4997 if ((I32)(rx->lastcloseparen) >= nums[i] &&
4998 rx->offs[nums[i]].start != -1 &&
4999 rx->offs[nums[i]].end != -1)
5005 if (parno || flags & RXapif_ALL) {
5006 return newSVhek(HeKEY_hek(temphe));
5014 Perl_reg_named_buff_scalar(pTHX_ REGEXP * const r, const U32 flags)
5019 struct regexp *const rx = (struct regexp *)SvANY(r);
5021 if (rx && RXp_PAREN_NAMES(rx)) {
5022 if (flags & (RXapif_ALL | RXapif_REGNAMES_COUNT)) {
5023 return newSViv(HvTOTALKEYS(RXp_PAREN_NAMES(rx)));
5024 } else if (flags & RXapif_ONE) {
5025 ret = CALLREG_NAMED_BUFF_ALL(r, (flags | RXapif_REGNAMES));
5026 av = (AV*)SvRV(ret);
5027 length = av_len(av);
5028 return newSViv(length + 1);
5030 Perl_croak(aTHX_ "panic: Unknown flags %d in named_buff_scalar", (int)flags);
5034 return &PL_sv_undef;
5038 Perl_reg_named_buff_all(pTHX_ REGEXP * const r, const U32 flags)
5040 struct regexp *const rx = (struct regexp *)SvANY(r);
5043 if (rx && RXp_PAREN_NAMES(rx)) {
5044 HV *hv= RXp_PAREN_NAMES(rx);
5046 (void)hv_iterinit(hv);
5047 while ( (temphe = hv_iternext_flags(hv,0)) ) {
5050 SV* sv_dat = HeVAL(temphe);
5051 I32 *nums = (I32*)SvPVX(sv_dat);
5052 for ( i = 0; i < SvIVX(sv_dat); i++ ) {
5053 if ((I32)(rx->lastcloseparen) >= nums[i] &&
5054 rx->offs[nums[i]].start != -1 &&
5055 rx->offs[nums[i]].end != -1)
5061 if (parno || flags & RXapif_ALL) {
5062 av_push(av, newSVhek(HeKEY_hek(temphe)));
5067 return newRV((SV*)av);
5071 Perl_reg_numbered_buff_fetch(pTHX_ REGEXP * const r, const I32 paren,
5074 struct regexp *const rx = (struct regexp *)SvANY(r);
5080 sv_setsv(sv,&PL_sv_undef);
5084 if (paren == RX_BUFF_IDX_PREMATCH && rx->offs[0].start != -1) {
5086 i = rx->offs[0].start;
5090 if (paren == RX_BUFF_IDX_POSTMATCH && rx->offs[0].end != -1) {
5092 s = rx->subbeg + rx->offs[0].end;
5093 i = rx->sublen - rx->offs[0].end;
5096 if ( 0 <= paren && paren <= (I32)rx->nparens &&
5097 (s1 = rx->offs[paren].start) != -1 &&
5098 (t1 = rx->offs[paren].end) != -1)
5102 s = rx->subbeg + s1;
5104 sv_setsv(sv,&PL_sv_undef);
5107 assert(rx->sublen >= (s - rx->subbeg) + i );
5109 const int oldtainted = PL_tainted;
5111 sv_setpvn(sv, s, i);
5112 PL_tainted = oldtainted;
5113 if ( (rx->extflags & RXf_CANY_SEEN)
5114 ? (RXp_MATCH_UTF8(rx)
5115 && (!i || is_utf8_string((U8*)s, i)))
5116 : (RXp_MATCH_UTF8(rx)) )
5123 if (RXp_MATCH_TAINTED(rx)) {
5124 if (SvTYPE(sv) >= SVt_PVMG) {
5125 MAGIC* const mg = SvMAGIC(sv);
5128 SvMAGIC_set(sv, mg->mg_moremagic);
5130 if ((mgt = SvMAGIC(sv))) {
5131 mg->mg_moremagic = mgt;
5132 SvMAGIC_set(sv, mg);
5142 sv_setsv(sv,&PL_sv_undef);
5148 Perl_reg_numbered_buff_store(pTHX_ REGEXP * const rx, const I32 paren,
5149 SV const * const value)
5151 PERL_UNUSED_ARG(rx);
5152 PERL_UNUSED_ARG(paren);
5153 PERL_UNUSED_ARG(value);
5156 Perl_croak(aTHX_ PL_no_modify);
5160 Perl_reg_numbered_buff_length(pTHX_ REGEXP * const r, const SV * const sv,
5163 struct regexp *const rx = (struct regexp *)SvANY(r);
5167 /* Some of this code was originally in C<Perl_magic_len> in F<mg.c> */
5169 /* $` / ${^PREMATCH} */
5170 case RX_BUFF_IDX_PREMATCH:
5171 if (rx->offs[0].start != -1) {
5172 i = rx->offs[0].start;
5180 /* $' / ${^POSTMATCH} */
5181 case RX_BUFF_IDX_POSTMATCH:
5182 if (rx->offs[0].end != -1) {
5183 i = rx->sublen - rx->offs[0].end;
5185 s1 = rx->offs[0].end;
5191 /* $& / ${^MATCH}, $1, $2, ... */
5193 if (paren <= (I32)rx->nparens &&
5194 (s1 = rx->offs[paren].start) != -1 &&
5195 (t1 = rx->offs[paren].end) != -1)
5200 if (ckWARN(WARN_UNINITIALIZED))
5201 report_uninit((SV*)sv);
5206 if (i > 0 && RXp_MATCH_UTF8(rx)) {
5207 const char * const s = rx->subbeg + s1;
5212 if (is_utf8_string_loclen((U8*)s, i, &ep, &el))
5219 Perl_reg_qr_package(pTHX_ REGEXP * const rx)
5221 PERL_UNUSED_ARG(rx);
5225 return newSVpvs("Regexp");
5228 /* Scans the name of a named buffer from the pattern.
5229 * If flags is REG_RSN_RETURN_NULL returns null.
5230 * If flags is REG_RSN_RETURN_NAME returns an SV* containing the name
5231 * If flags is REG_RSN_RETURN_DATA returns the data SV* corresponding
5232 * to the parsed name as looked up in the RExC_paren_names hash.
5233 * If there is an error throws a vFAIL().. type exception.
5236 #define REG_RSN_RETURN_NULL 0
5237 #define REG_RSN_RETURN_NAME 1
5238 #define REG_RSN_RETURN_DATA 2
5241 S_reg_scan_name(pTHX_ RExC_state_t *pRExC_state, U32 flags) {
5242 char *name_start = RExC_parse;
5244 if (isIDFIRST_lazy_if(RExC_parse, UTF)) {
5245 /* skip IDFIRST by using do...while */
5248 RExC_parse += UTF8SKIP(RExC_parse);
5249 } while (isALNUM_utf8((U8*)RExC_parse));
5253 } while (isALNUM(*RExC_parse));
5258 = newSVpvn_flags(name_start, (int)(RExC_parse - name_start),
5259 SVs_TEMP | (UTF ? SVf_UTF8 : 0));
5260 if ( flags == REG_RSN_RETURN_NAME)
5262 else if (flags==REG_RSN_RETURN_DATA) {
5265 if ( ! sv_name ) /* should not happen*/
5266 Perl_croak(aTHX_ "panic: no svname in reg_scan_name");
5267 if (RExC_paren_names)
5268 he_str = hv_fetch_ent( RExC_paren_names, sv_name, 0, 0 );
5270 sv_dat = HeVAL(he_str);
5272 vFAIL("Reference to nonexistent named group");
5276 Perl_croak(aTHX_ "panic: bad flag in reg_scan_name");
5283 #define DEBUG_PARSE_MSG(funcname) DEBUG_PARSE_r({ \
5284 int rem=(int)(RExC_end - RExC_parse); \
5293 if (RExC_lastparse!=RExC_parse) \
5294 PerlIO_printf(Perl_debug_log," >%.*s%-*s", \
5297 iscut ? "..." : "<" \
5300 PerlIO_printf(Perl_debug_log,"%16s",""); \
5303 num = RExC_size + 1; \
5305 num=REG_NODE_NUM(RExC_emit); \
5306 if (RExC_lastnum!=num) \
5307 PerlIO_printf(Perl_debug_log,"|%4d",num); \
5309 PerlIO_printf(Perl_debug_log,"|%4s",""); \
5310 PerlIO_printf(Perl_debug_log,"|%*s%-4s", \
5311 (int)((depth*2)), "", \
5315 RExC_lastparse=RExC_parse; \
5320 #define DEBUG_PARSE(funcname) DEBUG_PARSE_r({ \
5321 DEBUG_PARSE_MSG((funcname)); \
5322 PerlIO_printf(Perl_debug_log,"%4s","\n"); \
5324 #define DEBUG_PARSE_FMT(funcname,fmt,args) DEBUG_PARSE_r({ \
5325 DEBUG_PARSE_MSG((funcname)); \
5326 PerlIO_printf(Perl_debug_log,fmt "\n",args); \
5329 - reg - regular expression, i.e. main body or parenthesized thing
5331 * Caller must absorb opening parenthesis.
5333 * Combining parenthesis handling with the base level of regular expression
5334 * is a trifle forced, but the need to tie the tails of the branches to what
5335 * follows makes it hard to avoid.
5337 #define REGTAIL(x,y,z) regtail((x),(y),(z),depth+1)
5339 #define REGTAIL_STUDY(x,y,z) regtail_study((x),(y),(z),depth+1)
5341 #define REGTAIL_STUDY(x,y,z) regtail((x),(y),(z),depth+1)
5345 S_reg(pTHX_ RExC_state_t *pRExC_state, I32 paren, I32 *flagp,U32 depth)
5346 /* paren: Parenthesized? 0=top, 1=(, inside: changed to letter. */
5349 register regnode *ret; /* Will be the head of the group. */
5350 register regnode *br;
5351 register regnode *lastbr;
5352 register regnode *ender = NULL;
5353 register I32 parno = 0;
5355 U32 oregflags = RExC_flags;
5356 bool have_branch = 0;
5358 I32 freeze_paren = 0;
5359 I32 after_freeze = 0;
5361 /* for (?g), (?gc), and (?o) warnings; warning
5362 about (?c) will warn about (?g) -- japhy */
5364 #define WASTED_O 0x01
5365 #define WASTED_G 0x02
5366 #define WASTED_C 0x04
5367 #define WASTED_GC (0x02|0x04)
5368 I32 wastedflags = 0x00;
5370 char * parse_start = RExC_parse; /* MJD */
5371 char * const oregcomp_parse = RExC_parse;
5373 GET_RE_DEBUG_FLAGS_DECL;
5374 DEBUG_PARSE("reg ");
5376 *flagp = 0; /* Tentatively. */
5379 /* Make an OPEN node, if parenthesized. */
5381 if ( *RExC_parse == '*') { /* (*VERB:ARG) */
5382 char *start_verb = RExC_parse;
5383 STRLEN verb_len = 0;
5384 char *start_arg = NULL;
5385 unsigned char op = 0;
5387 int internal_argval = 0; /* internal_argval is only useful if !argok */
5388 while ( *RExC_parse && *RExC_parse != ')' ) {
5389 if ( *RExC_parse == ':' ) {
5390 start_arg = RExC_parse + 1;
5396 verb_len = RExC_parse - start_verb;
5399 while ( *RExC_parse && *RExC_parse != ')' )
5401 if ( *RExC_parse != ')' )
5402 vFAIL("Unterminated verb pattern argument");
5403 if ( RExC_parse == start_arg )
5406 if ( *RExC_parse != ')' )
5407 vFAIL("Unterminated verb pattern");
5410 switch ( *start_verb ) {
5411 case 'A': /* (*ACCEPT) */
5412 if ( memEQs(start_verb,verb_len,"ACCEPT") ) {
5414 internal_argval = RExC_nestroot;
5417 case 'C': /* (*COMMIT) */
5418 if ( memEQs(start_verb,verb_len,"COMMIT") )
5421 case 'F': /* (*FAIL) */
5422 if ( verb_len==1 || memEQs(start_verb,verb_len,"FAIL") ) {
5427 case ':': /* (*:NAME) */
5428 case 'M': /* (*MARK:NAME) */
5429 if ( verb_len==0 || memEQs(start_verb,verb_len,"MARK") ) {
5434 case 'P': /* (*PRUNE) */
5435 if ( memEQs(start_verb,verb_len,"PRUNE") )
5438 case 'S': /* (*SKIP) */
5439 if ( memEQs(start_verb,verb_len,"SKIP") )
5442 case 'T': /* (*THEN) */
5443 /* [19:06] <TimToady> :: is then */
5444 if ( memEQs(start_verb,verb_len,"THEN") ) {
5446 RExC_seen |= REG_SEEN_CUTGROUP;
5452 vFAIL3("Unknown verb pattern '%.*s'",
5453 verb_len, start_verb);
5456 if ( start_arg && internal_argval ) {
5457 vFAIL3("Verb pattern '%.*s' may not have an argument",
5458 verb_len, start_verb);
5459 } else if ( argok < 0 && !start_arg ) {
5460 vFAIL3("Verb pattern '%.*s' has a mandatory argument",
5461 verb_len, start_verb);
5463 ret = reganode(pRExC_state, op, internal_argval);
5464 if ( ! internal_argval && ! SIZE_ONLY ) {
5466 SV *sv = newSVpvn( start_arg, RExC_parse - start_arg);
5467 ARG(ret) = add_data( pRExC_state, 1, "S" );
5468 RExC_rxi->data->data[ARG(ret)]=(void*)sv;
5475 if (!internal_argval)
5476 RExC_seen |= REG_SEEN_VERBARG;
5477 } else if ( start_arg ) {
5478 vFAIL3("Verb pattern '%.*s' may not have an argument",
5479 verb_len, start_verb);
5481 ret = reg_node(pRExC_state, op);
5483 nextchar(pRExC_state);
5486 if (*RExC_parse == '?') { /* (?...) */
5487 bool is_logical = 0;
5488 const char * const seqstart = RExC_parse;
5491 paren = *RExC_parse++;
5492 ret = NULL; /* For look-ahead/behind. */
5495 case 'P': /* (?P...) variants for those used to PCRE/Python */
5496 paren = *RExC_parse++;
5497 if ( paren == '<') /* (?P<...>) named capture */
5499 else if (paren == '>') { /* (?P>name) named recursion */
5500 goto named_recursion;
5502 else if (paren == '=') { /* (?P=...) named backref */
5503 /* this pretty much dupes the code for \k<NAME> in regatom(), if
5504 you change this make sure you change that */
5505 char* name_start = RExC_parse;
5507 SV *sv_dat = reg_scan_name(pRExC_state,
5508 SIZE_ONLY ? REG_RSN_RETURN_NULL : REG_RSN_RETURN_DATA);
5509 if (RExC_parse == name_start || *RExC_parse != ')')
5510 vFAIL2("Sequence %.3s... not terminated",parse_start);
5513 num = add_data( pRExC_state, 1, "S" );
5514 RExC_rxi->data->data[num]=(void*)sv_dat;
5515 SvREFCNT_inc_simple_void(sv_dat);
5518 ret = reganode(pRExC_state,
5519 (U8)(FOLD ? (LOC ? NREFFL : NREFF) : NREF),
5523 Set_Node_Offset(ret, parse_start+1);
5524 Set_Node_Cur_Length(ret); /* MJD */
5526 nextchar(pRExC_state);
5530 vFAIL3("Sequence (%.*s...) not recognized", RExC_parse-seqstart, seqstart);
5532 case '<': /* (?<...) */
5533 if (*RExC_parse == '!')
5535 else if (*RExC_parse != '=')
5541 case '\'': /* (?'...') */
5542 name_start= RExC_parse;
5543 svname = reg_scan_name(pRExC_state,
5544 SIZE_ONLY ? /* reverse test from the others */
5545 REG_RSN_RETURN_NAME :
5546 REG_RSN_RETURN_NULL);
5547 if (RExC_parse == name_start) {
5549 vFAIL3("Sequence (%.*s...) not recognized", RExC_parse-seqstart, seqstart);
5552 if (*RExC_parse != paren)
5553 vFAIL2("Sequence (?%c... not terminated",
5554 paren=='>' ? '<' : paren);
5558 if (!svname) /* shouldnt happen */
5560 "panic: reg_scan_name returned NULL");
5561 if (!RExC_paren_names) {
5562 RExC_paren_names= newHV();
5563 sv_2mortal((SV*)RExC_paren_names);
5565 RExC_paren_name_list= newAV();
5566 sv_2mortal((SV*)RExC_paren_name_list);
5569 he_str = hv_fetch_ent( RExC_paren_names, svname, 1, 0 );
5571 sv_dat = HeVAL(he_str);
5573 /* croak baby croak */
5575 "panic: paren_name hash element allocation failed");
5576 } else if ( SvPOK(sv_dat) ) {
5577 /* (?|...) can mean we have dupes so scan to check
5578 its already been stored. Maybe a flag indicating
5579 we are inside such a construct would be useful,
5580 but the arrays are likely to be quite small, so
5581 for now we punt -- dmq */
5582 IV count = SvIV(sv_dat);
5583 I32 *pv = (I32*)SvPVX(sv_dat);
5585 for ( i = 0 ; i < count ; i++ ) {
5586 if ( pv[i] == RExC_npar ) {
5592 pv = (I32*)SvGROW(sv_dat, SvCUR(sv_dat) + sizeof(I32)+1);
5593 SvCUR_set(sv_dat, SvCUR(sv_dat) + sizeof(I32));
5594 pv[count] = RExC_npar;
5598 (void)SvUPGRADE(sv_dat,SVt_PVNV);
5599 sv_setpvn(sv_dat, (char *)&(RExC_npar), sizeof(I32));
5604 if (!av_store(RExC_paren_name_list, RExC_npar, SvREFCNT_inc(svname)))
5605 SvREFCNT_dec(svname);
5608 /*sv_dump(sv_dat);*/
5610 nextchar(pRExC_state);
5612 goto capturing_parens;
5614 RExC_seen |= REG_SEEN_LOOKBEHIND;
5616 case '=': /* (?=...) */
5617 case '!': /* (?!...) */
5618 RExC_seen_zerolen++;
5619 if (*RExC_parse == ')') {
5620 ret=reg_node(pRExC_state, OPFAIL);
5621 nextchar(pRExC_state);
5625 case '|': /* (?|...) */
5626 /* branch reset, behave like a (?:...) except that
5627 buffers in alternations share the same numbers */
5629 after_freeze = freeze_paren = RExC_npar;
5631 case ':': /* (?:...) */
5632 case '>': /* (?>...) */
5634 case '$': /* (?$...) */
5635 case '@': /* (?@...) */
5636 vFAIL2("Sequence (?%c...) not implemented", (int)paren);
5638 case '#': /* (?#...) */
5639 while (*RExC_parse && *RExC_parse != ')')
5641 if (*RExC_parse != ')')
5642 FAIL("Sequence (?#... not terminated");
5643 nextchar(pRExC_state);
5646 case '0' : /* (?0) */
5647 case 'R' : /* (?R) */
5648 if (*RExC_parse != ')')
5649 FAIL("Sequence (?R) not terminated");
5650 ret = reg_node(pRExC_state, GOSTART);
5651 *flagp |= POSTPONED;
5652 nextchar(pRExC_state);
5655 { /* named and numeric backreferences */
5657 case '&': /* (?&NAME) */
5658 parse_start = RExC_parse - 1;
5661 SV *sv_dat = reg_scan_name(pRExC_state,
5662 SIZE_ONLY ? REG_RSN_RETURN_NULL : REG_RSN_RETURN_DATA);
5663 num = sv_dat ? *((I32 *)SvPVX(sv_dat)) : 0;
5665 goto gen_recurse_regop;
5668 if (!(RExC_parse[0] >= '1' && RExC_parse[0] <= '9')) {
5670 vFAIL("Illegal pattern");
5672 goto parse_recursion;
5674 case '-': /* (?-1) */
5675 if (!(RExC_parse[0] >= '1' && RExC_parse[0] <= '9')) {
5676 RExC_parse--; /* rewind to let it be handled later */
5680 case '1': case '2': case '3': case '4': /* (?1) */
5681 case '5': case '6': case '7': case '8': case '9':
5684 num = atoi(RExC_parse);
5685 parse_start = RExC_parse - 1; /* MJD */
5686 if (*RExC_parse == '-')
5688 while (isDIGIT(*RExC_parse))
5690 if (*RExC_parse!=')')
5691 vFAIL("Expecting close bracket");
5694 if ( paren == '-' ) {
5696 Diagram of capture buffer numbering.
5697 Top line is the normal capture buffer numbers
5698 Botton line is the negative indexing as from
5702 /(a(x)y)(a(b(c(?-2)d)e)f)(g(h))/
5706 num = RExC_npar + num;
5709 vFAIL("Reference to nonexistent group");
5711 } else if ( paren == '+' ) {
5712 num = RExC_npar + num - 1;
5715 ret = reganode(pRExC_state, GOSUB, num);
5717 if (num > (I32)RExC_rx->nparens) {
5719 vFAIL("Reference to nonexistent group");
5721 ARG2L_SET( ret, RExC_recurse_count++);
5723 DEBUG_OPTIMISE_MORE_r(PerlIO_printf(Perl_debug_log,
5724 "Recurse #%"UVuf" to %"IVdf"\n", (UV)ARG(ret), (IV)ARG2L(ret)));
5728 RExC_seen |= REG_SEEN_RECURSE;
5729 Set_Node_Length(ret, 1 + regarglen[OP(ret)]); /* MJD */
5730 Set_Node_Offset(ret, parse_start); /* MJD */
5732 *flagp |= POSTPONED;
5733 nextchar(pRExC_state);
5735 } /* named and numeric backreferences */
5738 case '?': /* (??...) */
5740 if (*RExC_parse != '{') {
5742 vFAIL3("Sequence (%.*s...) not recognized", RExC_parse-seqstart, seqstart);
5745 *flagp |= POSTPONED;
5746 paren = *RExC_parse++;
5748 case '{': /* (?{...}) */
5753 char *s = RExC_parse;
5755 RExC_seen_zerolen++;
5756 RExC_seen |= REG_SEEN_EVAL;
5757 while (count && (c = *RExC_parse)) {
5768 if (*RExC_parse != ')') {
5770 vFAIL("Sequence (?{...}) not terminated or not {}-balanced");
5774 OP_4tree *sop, *rop;
5775 SV * const sv = newSVpvn(s, RExC_parse - 1 - s);
5778 Perl_save_re_context(aTHX);
5779 rop = sv_compile_2op(sv, &sop, "re", &pad);
5780 sop->op_private |= OPpREFCOUNTED;
5781 /* re_dup will OpREFCNT_inc */
5782 OpREFCNT_set(sop, 1);
5785 n = add_data(pRExC_state, 3, "nop");
5786 RExC_rxi->data->data[n] = (void*)rop;
5787 RExC_rxi->data->data[n+1] = (void*)sop;
5788 RExC_rxi->data->data[n+2] = (void*)pad;
5791 else { /* First pass */
5792 if (PL_reginterp_cnt < ++RExC_seen_evals
5794 /* No compiled RE interpolated, has runtime
5795 components ===> unsafe. */
5796 FAIL("Eval-group not allowed at runtime, use re 'eval'");
5797 if (PL_tainting && PL_tainted)
5798 FAIL("Eval-group in insecure regular expression");
5799 #if PERL_VERSION > 8
5800 if (IN_PERL_COMPILETIME)
5805 nextchar(pRExC_state);
5807 ret = reg_node(pRExC_state, LOGICAL);
5810 REGTAIL(pRExC_state, ret, reganode(pRExC_state, EVAL, n));
5811 /* deal with the length of this later - MJD */
5814 ret = reganode(pRExC_state, EVAL, n);
5815 Set_Node_Length(ret, RExC_parse - parse_start + 1);
5816 Set_Node_Offset(ret, parse_start);
5819 case '(': /* (?(?{...})...) and (?(?=...)...) */
5822 if (RExC_parse[0] == '?') { /* (?(?...)) */
5823 if (RExC_parse[1] == '=' || RExC_parse[1] == '!'
5824 || RExC_parse[1] == '<'
5825 || RExC_parse[1] == '{') { /* Lookahead or eval. */
5828 ret = reg_node(pRExC_state, LOGICAL);
5831 REGTAIL(pRExC_state, ret, reg(pRExC_state, 1, &flag,depth+1));
5835 else if ( RExC_parse[0] == '<' /* (?(<NAME>)...) */
5836 || RExC_parse[0] == '\'' ) /* (?('NAME')...) */
5838 char ch = RExC_parse[0] == '<' ? '>' : '\'';
5839 char *name_start= RExC_parse++;
5841 SV *sv_dat=reg_scan_name(pRExC_state,
5842 SIZE_ONLY ? REG_RSN_RETURN_NULL : REG_RSN_RETURN_DATA);
5843 if (RExC_parse == name_start || *RExC_parse != ch)
5844 vFAIL2("Sequence (?(%c... not terminated",
5845 (ch == '>' ? '<' : ch));
5848 num = add_data( pRExC_state, 1, "S" );
5849 RExC_rxi->data->data[num]=(void*)sv_dat;
5850 SvREFCNT_inc_simple_void(sv_dat);
5852 ret = reganode(pRExC_state,NGROUPP,num);
5853 goto insert_if_check_paren;
5855 else if (RExC_parse[0] == 'D' &&
5856 RExC_parse[1] == 'E' &&
5857 RExC_parse[2] == 'F' &&
5858 RExC_parse[3] == 'I' &&
5859 RExC_parse[4] == 'N' &&
5860 RExC_parse[5] == 'E')
5862 ret = reganode(pRExC_state,DEFINEP,0);
5865 goto insert_if_check_paren;
5867 else if (RExC_parse[0] == 'R') {
5870 if (RExC_parse[0] >= '1' && RExC_parse[0] <= '9' ) {
5871 parno = atoi(RExC_parse++);
5872 while (isDIGIT(*RExC_parse))
5874 } else if (RExC_parse[0] == '&') {
5877 sv_dat = reg_scan_name(pRExC_state,
5878 SIZE_ONLY ? REG_RSN_RETURN_NULL : REG_RSN_RETURN_DATA);
5879 parno = sv_dat ? *((I32 *)SvPVX(sv_dat)) : 0;
5881 ret = reganode(pRExC_state,INSUBP,parno);
5882 goto insert_if_check_paren;
5884 else if (RExC_parse[0] >= '1' && RExC_parse[0] <= '9' ) {
5887 parno = atoi(RExC_parse++);
5889 while (isDIGIT(*RExC_parse))
5891 ret = reganode(pRExC_state, GROUPP, parno);
5893 insert_if_check_paren:
5894 if ((c = *nextchar(pRExC_state)) != ')')
5895 vFAIL("Switch condition not recognized");
5897 REGTAIL(pRExC_state, ret, reganode(pRExC_state, IFTHEN, 0));
5898 br = regbranch(pRExC_state, &flags, 1,depth+1);
5900 br = reganode(pRExC_state, LONGJMP, 0);
5902 REGTAIL(pRExC_state, br, reganode(pRExC_state, LONGJMP, 0));
5903 c = *nextchar(pRExC_state);
5908 vFAIL("(?(DEFINE)....) does not allow branches");
5909 lastbr = reganode(pRExC_state, IFTHEN, 0); /* Fake one for optimizer. */
5910 regbranch(pRExC_state, &flags, 1,depth+1);
5911 REGTAIL(pRExC_state, ret, lastbr);
5914 c = *nextchar(pRExC_state);
5919 vFAIL("Switch (?(condition)... contains too many branches");
5920 ender = reg_node(pRExC_state, TAIL);
5921 REGTAIL(pRExC_state, br, ender);
5923 REGTAIL(pRExC_state, lastbr, ender);
5924 REGTAIL(pRExC_state, NEXTOPER(NEXTOPER(lastbr)), ender);
5927 REGTAIL(pRExC_state, ret, ender);
5928 RExC_size++; /* XXX WHY do we need this?!!
5929 For large programs it seems to be required
5930 but I can't figure out why. -- dmq*/
5934 vFAIL2("Unknown switch condition (?(%.2s", RExC_parse);
5938 RExC_parse--; /* for vFAIL to print correctly */
5939 vFAIL("Sequence (? incomplete");
5943 parse_flags: /* (?i) */
5945 U32 posflags = 0, negflags = 0;
5946 U32 *flagsp = &posflags;
5948 while (*RExC_parse) {
5949 /* && strchr("iogcmsx", *RExC_parse) */
5950 /* (?g), (?gc) and (?o) are useless here
5951 and must be globally applied -- japhy */
5952 switch (*RExC_parse) {
5953 CASE_STD_PMMOD_FLAGS_PARSE_SET(flagsp);
5954 case ONCE_PAT_MOD: /* 'o' */
5955 case GLOBAL_PAT_MOD: /* 'g' */
5956 if (SIZE_ONLY && ckWARN(WARN_REGEXP)) {
5957 const I32 wflagbit = *RExC_parse == 'o' ? WASTED_O : WASTED_G;
5958 if (! (wastedflags & wflagbit) ) {
5959 wastedflags |= wflagbit;
5962 "Useless (%s%c) - %suse /%c modifier",
5963 flagsp == &negflags ? "?-" : "?",
5965 flagsp == &negflags ? "don't " : "",
5972 case CONTINUE_PAT_MOD: /* 'c' */
5973 if (SIZE_ONLY && ckWARN(WARN_REGEXP)) {
5974 if (! (wastedflags & WASTED_C) ) {
5975 wastedflags |= WASTED_GC;
5978 "Useless (%sc) - %suse /gc modifier",
5979 flagsp == &negflags ? "?-" : "?",
5980 flagsp == &negflags ? "don't " : ""
5985 case KEEPCOPY_PAT_MOD: /* 'p' */
5986 if (flagsp == &negflags) {
5987 if (SIZE_ONLY && ckWARN(WARN_REGEXP))
5988 vWARN(RExC_parse + 1,"Useless use of (?-p)");
5990 *flagsp |= RXf_PMf_KEEPCOPY;
5994 if (flagsp == &negflags) {
5996 vFAIL3("Sequence (%.*s...) not recognized", RExC_parse-seqstart, seqstart);
6000 wastedflags = 0; /* reset so (?g-c) warns twice */
6006 RExC_flags |= posflags;
6007 RExC_flags &= ~negflags;
6009 oregflags |= posflags;
6010 oregflags &= ~negflags;
6012 nextchar(pRExC_state);
6023 vFAIL3("Sequence (%.*s...) not recognized", RExC_parse-seqstart, seqstart);
6028 }} /* one for the default block, one for the switch */
6035 ret = reganode(pRExC_state, OPEN, parno);
6038 RExC_nestroot = parno;
6039 if (RExC_seen & REG_SEEN_RECURSE
6040 && !RExC_open_parens[parno-1])
6042 DEBUG_OPTIMISE_MORE_r(PerlIO_printf(Perl_debug_log,
6043 "Setting open paren #%"IVdf" to %d\n",
6044 (IV)parno, REG_NODE_NUM(ret)));
6045 RExC_open_parens[parno-1]= ret;
6048 Set_Node_Length(ret, 1); /* MJD */
6049 Set_Node_Offset(ret, RExC_parse); /* MJD */
6057 /* Pick up the branches, linking them together. */
6058 parse_start = RExC_parse; /* MJD */
6059 br = regbranch(pRExC_state, &flags, 1,depth+1);
6060 /* branch_len = (paren != 0); */
6064 if (*RExC_parse == '|') {
6065 if (!SIZE_ONLY && RExC_extralen) {
6066 reginsert(pRExC_state, BRANCHJ, br, depth+1);
6069 reginsert(pRExC_state, BRANCH, br, depth+1);
6070 Set_Node_Length(br, paren != 0);
6071 Set_Node_Offset_To_R(br-RExC_emit_start, parse_start-RExC_start);
6075 RExC_extralen += 1; /* For BRANCHJ-BRANCH. */
6077 else if (paren == ':') {
6078 *flagp |= flags&SIMPLE;
6080 if (is_open) { /* Starts with OPEN. */
6081 REGTAIL(pRExC_state, ret, br); /* OPEN -> first. */
6083 else if (paren != '?') /* Not Conditional */
6085 *flagp |= flags & (SPSTART | HASWIDTH | POSTPONED);
6087 while (*RExC_parse == '|') {
6088 if (!SIZE_ONLY && RExC_extralen) {
6089 ender = reganode(pRExC_state, LONGJMP,0);
6090 REGTAIL(pRExC_state, NEXTOPER(NEXTOPER(lastbr)), ender); /* Append to the previous. */
6093 RExC_extralen += 2; /* Account for LONGJMP. */
6094 nextchar(pRExC_state);
6096 if (RExC_npar > after_freeze)
6097 after_freeze = RExC_npar;
6098 RExC_npar = freeze_paren;
6100 br = regbranch(pRExC_state, &flags, 0, depth+1);
6104 REGTAIL(pRExC_state, lastbr, br); /* BRANCH -> BRANCH. */
6106 *flagp |= flags & (SPSTART | HASWIDTH | POSTPONED);
6109 if (have_branch || paren != ':') {
6110 /* Make a closing node, and hook it on the end. */
6113 ender = reg_node(pRExC_state, TAIL);
6116 ender = reganode(pRExC_state, CLOSE, parno);
6117 if (!SIZE_ONLY && RExC_seen & REG_SEEN_RECURSE) {
6118 DEBUG_OPTIMISE_MORE_r(PerlIO_printf(Perl_debug_log,
6119 "Setting close paren #%"IVdf" to %d\n",
6120 (IV)parno, REG_NODE_NUM(ender)));
6121 RExC_close_parens[parno-1]= ender;
6122 if (RExC_nestroot == parno)
6125 Set_Node_Offset(ender,RExC_parse+1); /* MJD */
6126 Set_Node_Length(ender,1); /* MJD */
6132 *flagp &= ~HASWIDTH;
6135 ender = reg_node(pRExC_state, SUCCEED);
6138 ender = reg_node(pRExC_state, END);
6140 assert(!RExC_opend); /* there can only be one! */
6145 REGTAIL(pRExC_state, lastbr, ender);
6147 if (have_branch && !SIZE_ONLY) {
6149 RExC_seen |= REG_TOP_LEVEL_BRANCHES;
6151 /* Hook the tails of the branches to the closing node. */
6152 for (br = ret; br; br = regnext(br)) {
6153 const U8 op = PL_regkind[OP(br)];
6155 REGTAIL_STUDY(pRExC_state, NEXTOPER(br), ender);
6157 else if (op == BRANCHJ) {
6158 REGTAIL_STUDY(pRExC_state, NEXTOPER(NEXTOPER(br)), ender);
6166 static const char parens[] = "=!<,>";
6168 if (paren && (p = strchr(parens, paren))) {
6169 U8 node = ((p - parens) % 2) ? UNLESSM : IFMATCH;
6170 int flag = (p - parens) > 1;
6173 node = SUSPEND, flag = 0;
6174 reginsert(pRExC_state, node,ret, depth+1);
6175 Set_Node_Cur_Length(ret);
6176 Set_Node_Offset(ret, parse_start + 1);
6178 REGTAIL_STUDY(pRExC_state, ret, reg_node(pRExC_state, TAIL));
6182 /* Check for proper termination. */
6184 RExC_flags = oregflags;
6185 if (RExC_parse >= RExC_end || *nextchar(pRExC_state) != ')') {
6186 RExC_parse = oregcomp_parse;
6187 vFAIL("Unmatched (");
6190 else if (!paren && RExC_parse < RExC_end) {
6191 if (*RExC_parse == ')') {
6193 vFAIL("Unmatched )");
6196 FAIL("Junk on end of regexp"); /* "Can't happen". */
6200 RExC_npar = after_freeze;
6205 - regbranch - one alternative of an | operator
6207 * Implements the concatenation operator.
6210 S_regbranch(pTHX_ RExC_state_t *pRExC_state, I32 *flagp, I32 first, U32 depth)
6213 register regnode *ret;
6214 register regnode *chain = NULL;
6215 register regnode *latest;
6216 I32 flags = 0, c = 0;
6217 GET_RE_DEBUG_FLAGS_DECL;
6218 DEBUG_PARSE("brnc");
6223 if (!SIZE_ONLY && RExC_extralen)
6224 ret = reganode(pRExC_state, BRANCHJ,0);
6226 ret = reg_node(pRExC_state, BRANCH);
6227 Set_Node_Length(ret, 1);
6231 if (!first && SIZE_ONLY)
6232 RExC_extralen += 1; /* BRANCHJ */
6234 *flagp = WORST; /* Tentatively. */
6237 nextchar(pRExC_state);
6238 while (RExC_parse < RExC_end && *RExC_parse != '|' && *RExC_parse != ')') {
6240 latest = regpiece(pRExC_state, &flags,depth+1);
6241 if (latest == NULL) {
6242 if (flags & TRYAGAIN)
6246 else if (ret == NULL)
6248 *flagp |= flags&(HASWIDTH|POSTPONED);
6249 if (chain == NULL) /* First piece. */
6250 *flagp |= flags&SPSTART;
6253 REGTAIL(pRExC_state, chain, latest);
6258 if (chain == NULL) { /* Loop ran zero times. */
6259 chain = reg_node(pRExC_state, NOTHING);
6264 *flagp |= flags&SIMPLE;
6271 - regpiece - something followed by possible [*+?]
6273 * Note that the branching code sequences used for ? and the general cases
6274 * of * and + are somewhat optimized: they use the same NOTHING node as
6275 * both the endmarker for their branch list and the body of the last branch.
6276 * It might seem that this node could be dispensed with entirely, but the
6277 * endmarker role is not redundant.
6280 S_regpiece(pTHX_ RExC_state_t *pRExC_state, I32 *flagp, U32 depth)
6283 register regnode *ret;
6285 register char *next;
6287 const char * const origparse = RExC_parse;
6289 I32 max = REG_INFTY;
6291 const char *maxpos = NULL;
6292 GET_RE_DEBUG_FLAGS_DECL;
6293 DEBUG_PARSE("piec");
6295 ret = regatom(pRExC_state, &flags,depth+1);
6297 if (flags & TRYAGAIN)
6304 if (op == '{' && regcurly(RExC_parse)) {
6306 parse_start = RExC_parse; /* MJD */
6307 next = RExC_parse + 1;
6308 while (isDIGIT(*next) || *next == ',') {
6317 if (*next == '}') { /* got one */
6321 min = atoi(RExC_parse);
6325 maxpos = RExC_parse;
6327 if (!max && *maxpos != '0')
6328 max = REG_INFTY; /* meaning "infinity" */
6329 else if (max >= REG_INFTY)
6330 vFAIL2("Quantifier in {,} bigger than %d", REG_INFTY - 1);
6332 nextchar(pRExC_state);
6335 if ((flags&SIMPLE)) {
6336 RExC_naughty += 2 + RExC_naughty / 2;
6337 reginsert(pRExC_state, CURLY, ret, depth+1);
6338 Set_Node_Offset(ret, parse_start+1); /* MJD */
6339 Set_Node_Cur_Length(ret);
6342 regnode * const w = reg_node(pRExC_state, WHILEM);
6345 REGTAIL(pRExC_state, ret, w);
6346 if (!SIZE_ONLY && RExC_extralen) {
6347 reginsert(pRExC_state, LONGJMP,ret, depth+1);
6348 reginsert(pRExC_state, NOTHING,ret, depth+1);
6349 NEXT_OFF(ret) = 3; /* Go over LONGJMP. */
6351 reginsert(pRExC_state, CURLYX,ret, depth+1);
6353 Set_Node_Offset(ret, parse_start+1);
6354 Set_Node_Length(ret,
6355 op == '{' ? (RExC_parse - parse_start) : 1);
6357 if (!SIZE_ONLY && RExC_extralen)
6358 NEXT_OFF(ret) = 3; /* Go over NOTHING to LONGJMP. */
6359 REGTAIL(pRExC_state, ret, reg_node(pRExC_state, NOTHING));
6361 RExC_whilem_seen++, RExC_extralen += 3;
6362 RExC_naughty += 4 + RExC_naughty; /* compound interest */
6370 if (max && max < min)
6371 vFAIL("Can't do {n,m} with n > m");
6373 ARG1_SET(ret, (U16)min);
6374 ARG2_SET(ret, (U16)max);
6386 #if 0 /* Now runtime fix should be reliable. */
6388 /* if this is reinstated, don't forget to put this back into perldiag:
6390 =item Regexp *+ operand could be empty at {#} in regex m/%s/
6392 (F) The part of the regexp subject to either the * or + quantifier
6393 could match an empty string. The {#} shows in the regular
6394 expression about where the problem was discovered.
6398 if (!(flags&HASWIDTH) && op != '?')
6399 vFAIL("Regexp *+ operand could be empty");
6402 parse_start = RExC_parse;
6403 nextchar(pRExC_state);
6405 *flagp = (op != '+') ? (WORST|SPSTART|HASWIDTH) : (WORST|HASWIDTH);
6407 if (op == '*' && (flags&SIMPLE)) {
6408 reginsert(pRExC_state, STAR, ret, depth+1);
6412 else if (op == '*') {
6416 else if (op == '+' && (flags&SIMPLE)) {
6417 reginsert(pRExC_state, PLUS, ret, depth+1);
6421 else if (op == '+') {
6425 else if (op == '?') {
6430 if (!SIZE_ONLY && !(flags&(HASWIDTH|POSTPONED)) && max > REG_INFTY/3 && ckWARN(WARN_REGEXP)) {
6432 "%.*s matches null string many times",
6433 (int)(RExC_parse >= origparse ? RExC_parse - origparse : 0),
6437 if (RExC_parse < RExC_end && *RExC_parse == '?') {
6438 nextchar(pRExC_state);
6439 reginsert(pRExC_state, MINMOD, ret, depth+1);
6440 REGTAIL(pRExC_state, ret, ret + NODE_STEP_REGNODE);
6442 #ifndef REG_ALLOW_MINMOD_SUSPEND
6445 if (RExC_parse < RExC_end && *RExC_parse == '+') {
6447 nextchar(pRExC_state);
6448 ender = reg_node(pRExC_state, SUCCEED);
6449 REGTAIL(pRExC_state, ret, ender);
6450 reginsert(pRExC_state, SUSPEND, ret, depth+1);
6452 ender = reg_node(pRExC_state, TAIL);
6453 REGTAIL(pRExC_state, ret, ender);
6457 if (RExC_parse < RExC_end && ISMULT2(RExC_parse)) {
6459 vFAIL("Nested quantifiers");
6466 /* reg_namedseq(pRExC_state,UVp)
6468 This is expected to be called by a parser routine that has
6469 recognized'\N' and needs to handle the rest. RExC_parse is
6470 expected to point at the first char following the N at the time
6473 If valuep is non-null then it is assumed that we are parsing inside
6474 of a charclass definition and the first codepoint in the resolved
6475 string is returned via *valuep and the routine will return NULL.
6476 In this mode if a multichar string is returned from the charnames
6477 handler a warning will be issued, and only the first char in the
6478 sequence will be examined. If the string returned is zero length
6479 then the value of *valuep is undefined and NON-NULL will
6480 be returned to indicate failure. (This will NOT be a valid pointer
6483 If value is null then it is assumed that we are parsing normal text
6484 and inserts a new EXACT node into the program containing the resolved
6485 string and returns a pointer to the new node. If the string is
6486 zerolength a NOTHING node is emitted.
6488 On success RExC_parse is set to the char following the endbrace.
6489 Parsing failures will generate a fatal errorvia vFAIL(...)
6491 NOTE: We cache all results from the charnames handler locally in
6492 the RExC_charnames hash (created on first use) to prevent a charnames
6493 handler from playing silly-buggers and returning a short string and
6494 then a long string for a given pattern. Since the regexp program
6495 size is calculated during an initial parse this would result
6496 in a buffer overrun so we cache to prevent the charname result from
6497 changing during the course of the parse.
6501 S_reg_namedseq(pTHX_ RExC_state_t *pRExC_state, UV *valuep)
6503 char * name; /* start of the content of the name */
6504 char * endbrace; /* endbrace following the name */
6507 STRLEN len; /* this has various purposes throughout the code */
6508 bool cached = 0; /* if this is true then we shouldn't refcount dev sv_str */
6509 regnode *ret = NULL;
6511 if (*RExC_parse != '{') {
6512 vFAIL("Missing braces on \\N{}");
6514 name = RExC_parse+1;
6515 endbrace = strchr(RExC_parse, '}');
6518 vFAIL("Missing right brace on \\N{}");
6520 RExC_parse = endbrace + 1;
6523 /* RExC_parse points at the beginning brace,
6524 endbrace points at the last */
6525 if ( name[0]=='U' && name[1]=='+' ) {
6526 /* its a "Unicode hex" notation {U+89AB} */
6527 I32 fl = PERL_SCAN_ALLOW_UNDERSCORES
6528 | PERL_SCAN_DISALLOW_PREFIX
6529 | (SIZE_ONLY ? PERL_SCAN_SILENT_ILLDIGIT : 0);
6532 len = (STRLEN)(endbrace - name - 2);
6533 cp = grok_hex(name + 2, &len, &fl, NULL);
6534 if ( len != (STRLEN)(endbrace - name - 2) ) {
6544 sv_str= newSVpvn(&string, 1);
6546 /* fetch the charnames handler for this scope */
6547 HV * const table = GvHV(PL_hintgv);
6549 hv_fetchs(table, "charnames", FALSE) :
6551 SV *cv= cvp ? *cvp : NULL;
6554 /* create an SV with the name as argument */
6555 sv_name = newSVpvn(name, endbrace - name);
6557 if (!table || !(PL_hints & HINT_LOCALIZE_HH)) {
6558 vFAIL2("Constant(\\N{%s}) unknown: "
6559 "(possibly a missing \"use charnames ...\")",
6562 if (!cvp || !SvOK(*cvp)) { /* when $^H{charnames} = undef; */
6563 vFAIL2("Constant(\\N{%s}): "
6564 "$^H{charnames} is not defined",SvPVX(sv_name));
6569 if (!RExC_charnames) {
6570 /* make sure our cache is allocated */
6571 RExC_charnames = newHV();
6572 sv_2mortal((SV*)RExC_charnames);
6574 /* see if we have looked this one up before */
6575 he_str = hv_fetch_ent( RExC_charnames, sv_name, 0, 0 );
6577 sv_str = HeVAL(he_str);
6590 count= call_sv(cv, G_SCALAR);
6592 if (count == 1) { /* XXXX is this right? dmq */
6594 SvREFCNT_inc_simple_void(sv_str);
6602 if ( !sv_str || !SvOK(sv_str) ) {
6603 vFAIL2("Constant(\\N{%s}): Call to &{$^H{charnames}} "
6604 "did not return a defined value",SvPVX(sv_name));
6606 if (hv_store_ent( RExC_charnames, sv_name, sv_str, 0))
6611 char *p = SvPV(sv_str, len);
6614 if ( SvUTF8(sv_str) ) {
6615 *valuep = utf8_to_uvchr((U8*)p, &numlen);
6619 We have to turn on utf8 for high bit chars otherwise
6620 we get failures with
6622 "ss" =~ /[\N{LATIN SMALL LETTER SHARP S}]/i
6623 "SS" =~ /[\N{LATIN SMALL LETTER SHARP S}]/i
6625 This is different from what \x{} would do with the same
6626 codepoint, where the condition is > 0xFF.
6633 /* warn if we havent used the whole string? */
6635 if (numlen<len && SIZE_ONLY && ckWARN(WARN_REGEXP)) {
6637 "Ignoring excess chars from \\N{%s} in character class",
6641 } else if (SIZE_ONLY && ckWARN(WARN_REGEXP)) {
6643 "Ignoring zero length \\N{%s} in character class",
6648 SvREFCNT_dec(sv_name);
6650 SvREFCNT_dec(sv_str);
6651 return len ? NULL : (regnode *)&len;
6652 } else if(SvCUR(sv_str)) {
6658 char * parse_start = name-3; /* needed for the offsets */
6660 GET_RE_DEBUG_FLAGS_DECL; /* needed for the offsets */
6662 ret = reg_node(pRExC_state,
6663 (U8)(FOLD ? (LOC ? EXACTFL : EXACTF) : EXACT));
6666 if ( RExC_utf8 && !SvUTF8(sv_str) ) {
6667 sv_utf8_upgrade(sv_str);
6668 } else if ( !RExC_utf8 && SvUTF8(sv_str) ) {
6672 p = SvPV(sv_str, len);
6674 /* len is the length written, charlen is the size the char read */
6675 for ( len = 0; p < pend; p += charlen ) {
6677 UV uvc = utf8_to_uvchr((U8*)p, &charlen);
6679 STRLEN foldlen,numlen;
6680 U8 tmpbuf[UTF8_MAXBYTES_CASE+1], *foldbuf;
6681 uvc = toFOLD_uni(uvc, tmpbuf, &foldlen);
6682 /* Emit all the Unicode characters. */
6684 for (foldbuf = tmpbuf;
6688 uvc = utf8_to_uvchr(foldbuf, &numlen);
6690 const STRLEN unilen = reguni(pRExC_state, uvc, s);
6693 /* In EBCDIC the numlen
6694 * and unilen can differ. */
6696 if (numlen >= foldlen)
6700 break; /* "Can't happen." */
6703 const STRLEN unilen = reguni(pRExC_state, uvc, s);
6715 RExC_size += STR_SZ(len);
6718 RExC_emit += STR_SZ(len);
6720 Set_Node_Cur_Length(ret); /* MJD */
6722 nextchar(pRExC_state);
6724 ret = reg_node(pRExC_state,NOTHING);
6727 SvREFCNT_dec(sv_str);
6730 SvREFCNT_dec(sv_name);
6740 * It returns the code point in utf8 for the value in *encp.
6741 * value: a code value in the source encoding
6742 * encp: a pointer to an Encode object
6744 * If the result from Encode is not a single character,
6745 * it returns U+FFFD (Replacement character) and sets *encp to NULL.
6748 S_reg_recode(pTHX_ const char value, SV **encp)
6751 SV * const sv = newSVpvn_flags(&value, numlen, SVs_TEMP);
6752 const char * const s = *encp ? sv_recode_to_utf8(sv, *encp) : SvPVX(sv);
6753 const STRLEN newlen = SvCUR(sv);
6754 UV uv = UNICODE_REPLACEMENT;
6758 ? utf8n_to_uvchr((U8*)s, newlen, &numlen, UTF8_ALLOW_DEFAULT)
6761 if (!newlen || numlen != newlen) {
6762 uv = UNICODE_REPLACEMENT;
6770 - regatom - the lowest level
6772 Try to identify anything special at the start of the pattern. If there
6773 is, then handle it as required. This may involve generating a single regop,
6774 such as for an assertion; or it may involve recursing, such as to
6775 handle a () structure.
6777 If the string doesn't start with something special then we gobble up
6778 as much literal text as we can.
6780 Once we have been able to handle whatever type of thing started the
6781 sequence, we return.
6783 Note: we have to be careful with escapes, as they can be both literal
6784 and special, and in the case of \10 and friends can either, depending
6785 on context. Specifically there are two seperate switches for handling
6786 escape sequences, with the one for handling literal escapes requiring
6787 a dummy entry for all of the special escapes that are actually handled
6792 S_regatom(pTHX_ RExC_state_t *pRExC_state, I32 *flagp, U32 depth)
6795 register regnode *ret = NULL;
6797 char *parse_start = RExC_parse;
6798 GET_RE_DEBUG_FLAGS_DECL;
6799 DEBUG_PARSE("atom");
6800 *flagp = WORST; /* Tentatively. */
6804 switch ((U8)*RExC_parse) {
6806 RExC_seen_zerolen++;
6807 nextchar(pRExC_state);
6808 if (RExC_flags & RXf_PMf_MULTILINE)
6809 ret = reg_node(pRExC_state, MBOL);
6810 else if (RExC_flags & RXf_PMf_SINGLELINE)
6811 ret = reg_node(pRExC_state, SBOL);
6813 ret = reg_node(pRExC_state, BOL);
6814 Set_Node_Length(ret, 1); /* MJD */
6817 nextchar(pRExC_state);
6819 RExC_seen_zerolen++;
6820 if (RExC_flags & RXf_PMf_MULTILINE)
6821 ret = reg_node(pRExC_state, MEOL);
6822 else if (RExC_flags & RXf_PMf_SINGLELINE)
6823 ret = reg_node(pRExC_state, SEOL);
6825 ret = reg_node(pRExC_state, EOL);
6826 Set_Node_Length(ret, 1); /* MJD */
6829 nextchar(pRExC_state);
6830 if (RExC_flags & RXf_PMf_SINGLELINE)
6831 ret = reg_node(pRExC_state, SANY);
6833 ret = reg_node(pRExC_state, REG_ANY);
6834 *flagp |= HASWIDTH|SIMPLE;
6836 Set_Node_Length(ret, 1); /* MJD */
6840 char * const oregcomp_parse = ++RExC_parse;
6841 ret = regclass(pRExC_state,depth+1);
6842 if (*RExC_parse != ']') {
6843 RExC_parse = oregcomp_parse;
6844 vFAIL("Unmatched [");
6846 nextchar(pRExC_state);
6847 *flagp |= HASWIDTH|SIMPLE;
6848 Set_Node_Length(ret, RExC_parse - oregcomp_parse + 1); /* MJD */
6852 nextchar(pRExC_state);
6853 ret = reg(pRExC_state, 1, &flags,depth+1);
6855 if (flags & TRYAGAIN) {
6856 if (RExC_parse == RExC_end) {
6857 /* Make parent create an empty node if needed. */
6865 *flagp |= flags&(HASWIDTH|SPSTART|SIMPLE|POSTPONED);
6869 if (flags & TRYAGAIN) {
6873 vFAIL("Internal urp");
6874 /* Supposed to be caught earlier. */
6877 if (!regcurly(RExC_parse)) {
6886 vFAIL("Quantifier follows nothing");
6894 len=0; /* silence a spurious compiler warning */
6895 if ((cp = what_len_TRICKYFOLD_safe(RExC_parse,RExC_end,UTF,len))) {
6896 *flagp |= HASWIDTH; /* could be SIMPLE too, but needs a handler in regexec.regrepeat */
6897 RExC_parse+=len-1; /* we get one from nextchar() as well. :-( */
6898 ret = reganode(pRExC_state, FOLDCHAR, cp);
6899 Set_Node_Length(ret, 1); /* MJD */
6900 nextchar(pRExC_state); /* kill whitespace under /x */
6908 This switch handles escape sequences that resolve to some kind
6909 of special regop and not to literal text. Escape sequnces that
6910 resolve to literal text are handled below in the switch marked
6913 Every entry in this switch *must* have a corresponding entry
6914 in the literal escape switch. However, the opposite is not
6915 required, as the default for this switch is to jump to the
6916 literal text handling code.
6918 switch ((U8)*++RExC_parse) {
6923 /* Special Escapes */
6925 RExC_seen_zerolen++;
6926 ret = reg_node(pRExC_state, SBOL);
6928 goto finish_meta_pat;
6930 ret = reg_node(pRExC_state, GPOS);
6931 RExC_seen |= REG_SEEN_GPOS;
6933 goto finish_meta_pat;
6935 RExC_seen_zerolen++;
6936 ret = reg_node(pRExC_state, KEEPS);
6938 /* XXX:dmq : disabling in-place substitution seems to
6939 * be necessary here to avoid cases of memory corruption, as
6940 * with: C<$_="x" x 80; s/x\K/y/> -- rgs
6942 RExC_seen |= REG_SEEN_LOOKBEHIND;
6943 goto finish_meta_pat;
6945 ret = reg_node(pRExC_state, SEOL);
6947 RExC_seen_zerolen++; /* Do not optimize RE away */
6948 goto finish_meta_pat;
6950 ret = reg_node(pRExC_state, EOS);
6952 RExC_seen_zerolen++; /* Do not optimize RE away */
6953 goto finish_meta_pat;
6955 ret = reg_node(pRExC_state, CANY);
6956 RExC_seen |= REG_SEEN_CANY;
6957 *flagp |= HASWIDTH|SIMPLE;
6958 goto finish_meta_pat;
6960 ret = reg_node(pRExC_state, CLUMP);
6962 goto finish_meta_pat;
6964 ret = reg_node(pRExC_state, (U8)(LOC ? ALNUML : ALNUM));
6965 *flagp |= HASWIDTH|SIMPLE;
6966 goto finish_meta_pat;
6968 ret = reg_node(pRExC_state, (U8)(LOC ? NALNUML : NALNUM));
6969 *flagp |= HASWIDTH|SIMPLE;
6970 goto finish_meta_pat;
6972 RExC_seen_zerolen++;
6973 RExC_seen |= REG_SEEN_LOOKBEHIND;
6974 ret = reg_node(pRExC_state, (U8)(LOC ? BOUNDL : BOUND));
6976 goto finish_meta_pat;
6978 RExC_seen_zerolen++;
6979 RExC_seen |= REG_SEEN_LOOKBEHIND;
6980 ret = reg_node(pRExC_state, (U8)(LOC ? NBOUNDL : NBOUND));
6982 goto finish_meta_pat;
6984 ret = reg_node(pRExC_state, (U8)(LOC ? SPACEL : SPACE));
6985 *flagp |= HASWIDTH|SIMPLE;
6986 goto finish_meta_pat;
6988 ret = reg_node(pRExC_state, (U8)(LOC ? NSPACEL : NSPACE));
6989 *flagp |= HASWIDTH|SIMPLE;
6990 goto finish_meta_pat;
6992 ret = reg_node(pRExC_state, DIGIT);
6993 *flagp |= HASWIDTH|SIMPLE;
6994 goto finish_meta_pat;
6996 ret = reg_node(pRExC_state, NDIGIT);
6997 *flagp |= HASWIDTH|SIMPLE;
6998 goto finish_meta_pat;
7000 ret = reg_node(pRExC_state, LNBREAK);
7001 *flagp |= HASWIDTH|SIMPLE;
7002 goto finish_meta_pat;
7004 ret = reg_node(pRExC_state, HORIZWS);
7005 *flagp |= HASWIDTH|SIMPLE;
7006 goto finish_meta_pat;
7008 ret = reg_node(pRExC_state, NHORIZWS);
7009 *flagp |= HASWIDTH|SIMPLE;
7010 goto finish_meta_pat;
7012 ret = reg_node(pRExC_state, VERTWS);
7013 *flagp |= HASWIDTH|SIMPLE;
7014 goto finish_meta_pat;
7016 ret = reg_node(pRExC_state, NVERTWS);
7017 *flagp |= HASWIDTH|SIMPLE;
7019 nextchar(pRExC_state);
7020 Set_Node_Length(ret, 2); /* MJD */
7025 char* const oldregxend = RExC_end;
7027 char* parse_start = RExC_parse - 2;
7030 if (RExC_parse[1] == '{') {
7031 /* a lovely hack--pretend we saw [\pX] instead */
7032 RExC_end = strchr(RExC_parse, '}');
7034 const U8 c = (U8)*RExC_parse;
7036 RExC_end = oldregxend;
7037 vFAIL2("Missing right brace on \\%c{}", c);
7042 RExC_end = RExC_parse + 2;
7043 if (RExC_end > oldregxend)
7044 RExC_end = oldregxend;
7048 ret = regclass(pRExC_state,depth+1);
7050 RExC_end = oldregxend;
7053 Set_Node_Offset(ret, parse_start + 2);
7054 Set_Node_Cur_Length(ret);
7055 nextchar(pRExC_state);
7056 *flagp |= HASWIDTH|SIMPLE;
7060 /* Handle \N{NAME} here and not below because it can be
7061 multicharacter. join_exact() will join them up later on.
7062 Also this makes sure that things like /\N{BLAH}+/ and
7063 \N{BLAH} being multi char Just Happen. dmq*/
7065 ret= reg_namedseq(pRExC_state, NULL);
7067 case 'k': /* Handle \k<NAME> and \k'NAME' */
7070 char ch= RExC_parse[1];
7071 if (ch != '<' && ch != '\'' && ch != '{') {
7073 vFAIL2("Sequence %.2s... not terminated",parse_start);
7075 /* this pretty much dupes the code for (?P=...) in reg(), if
7076 you change this make sure you change that */
7077 char* name_start = (RExC_parse += 2);
7079 SV *sv_dat = reg_scan_name(pRExC_state,
7080 SIZE_ONLY ? REG_RSN_RETURN_NULL : REG_RSN_RETURN_DATA);
7081 ch= (ch == '<') ? '>' : (ch == '{') ? '}' : '\'';
7082 if (RExC_parse == name_start || *RExC_parse != ch)
7083 vFAIL2("Sequence %.3s... not terminated",parse_start);
7086 num = add_data( pRExC_state, 1, "S" );
7087 RExC_rxi->data->data[num]=(void*)sv_dat;
7088 SvREFCNT_inc_simple_void(sv_dat);
7092 ret = reganode(pRExC_state,
7093 (U8)(FOLD ? (LOC ? NREFFL : NREFF) : NREF),
7097 /* override incorrect value set in reganode MJD */
7098 Set_Node_Offset(ret, parse_start+1);
7099 Set_Node_Cur_Length(ret); /* MJD */
7100 nextchar(pRExC_state);
7106 case '1': case '2': case '3': case '4':
7107 case '5': case '6': case '7': case '8': case '9':
7110 bool isg = *RExC_parse == 'g';
7115 if (*RExC_parse == '{') {
7119 if (*RExC_parse == '-') {
7123 if (hasbrace && !isDIGIT(*RExC_parse)) {
7124 if (isrel) RExC_parse--;
7126 goto parse_named_seq;
7128 num = atoi(RExC_parse);
7129 if (isg && num == 0)
7130 vFAIL("Reference to invalid group 0");
7132 num = RExC_npar - num;
7134 vFAIL("Reference to nonexistent or unclosed group");
7136 if (!isg && num > 9 && num >= RExC_npar)
7139 char * const parse_start = RExC_parse - 1; /* MJD */
7140 while (isDIGIT(*RExC_parse))
7142 if (parse_start == RExC_parse - 1)
7143 vFAIL("Unterminated \\g... pattern");
7145 if (*RExC_parse != '}')
7146 vFAIL("Unterminated \\g{...} pattern");
7150 if (num > (I32)RExC_rx->nparens)
7151 vFAIL("Reference to nonexistent group");
7154 ret = reganode(pRExC_state,
7155 (U8)(FOLD ? (LOC ? REFFL : REFF) : REF),
7159 /* override incorrect value set in reganode MJD */
7160 Set_Node_Offset(ret, parse_start+1);
7161 Set_Node_Cur_Length(ret); /* MJD */
7163 nextchar(pRExC_state);
7168 if (RExC_parse >= RExC_end)
7169 FAIL("Trailing \\");
7172 /* Do not generate "unrecognized" warnings here, we fall
7173 back into the quick-grab loop below */
7180 if (RExC_flags & RXf_PMf_EXTENDED) {
7181 if ( reg_skipcomment( pRExC_state ) )
7188 register STRLEN len;
7193 U8 tmpbuf[UTF8_MAXBYTES_CASE+1], *foldbuf;
7195 parse_start = RExC_parse - 1;
7201 ret = reg_node(pRExC_state,
7202 (U8)(FOLD ? (LOC ? EXACTFL : EXACTF) : EXACT));
7204 for (len = 0, p = RExC_parse - 1;
7205 len < 127 && p < RExC_end;
7208 char * const oldp = p;
7210 if (RExC_flags & RXf_PMf_EXTENDED)
7211 p = regwhite( pRExC_state, p );
7216 if (LOC || !FOLD || !is_TRICKYFOLD_safe(p,RExC_end,UTF))
7217 goto normal_default;
7227 /* Literal Escapes Switch
7229 This switch is meant to handle escape sequences that
7230 resolve to a literal character.
7232 Every escape sequence that represents something
7233 else, like an assertion or a char class, is handled
7234 in the switch marked 'Special Escapes' above in this
7235 routine, but also has an entry here as anything that
7236 isn't explicitly mentioned here will be treated as
7237 an unescaped equivalent literal.
7241 /* These are all the special escapes. */
7245 if (LOC || !FOLD || !is_TRICKYFOLD_safe(p,RExC_end,UTF))
7246 goto normal_default;
7247 case 'A': /* Start assertion */
7248 case 'b': case 'B': /* Word-boundary assertion*/
7249 case 'C': /* Single char !DANGEROUS! */
7250 case 'd': case 'D': /* digit class */
7251 case 'g': case 'G': /* generic-backref, pos assertion */
7252 case 'h': case 'H': /* HORIZWS */
7253 case 'k': case 'K': /* named backref, keep marker */
7254 case 'N': /* named char sequence */
7255 case 'p': case 'P': /* Unicode property */
7256 case 'R': /* LNBREAK */
7257 case 's': case 'S': /* space class */
7258 case 'v': case 'V': /* VERTWS */
7259 case 'w': case 'W': /* word class */
7260 case 'X': /* eXtended Unicode "combining character sequence" */
7261 case 'z': case 'Z': /* End of line/string assertion */
7265 /* Anything after here is an escape that resolves to a
7266 literal. (Except digits, which may or may not)
7285 ender = ASCII_TO_NATIVE('\033');
7289 ender = ASCII_TO_NATIVE('\007');
7294 char* const e = strchr(p, '}');
7298 vFAIL("Missing right brace on \\x{}");
7301 I32 flags = PERL_SCAN_ALLOW_UNDERSCORES
7302 | PERL_SCAN_DISALLOW_PREFIX;
7303 STRLEN numlen = e - p - 1;
7304 ender = grok_hex(p + 1, &numlen, &flags, NULL);
7311 I32 flags = PERL_SCAN_DISALLOW_PREFIX;
7313 ender = grok_hex(p, &numlen, &flags, NULL);
7316 if (PL_encoding && ender < 0x100)
7317 goto recode_encoding;
7321 ender = UCHARAT(p++);
7322 ender = toCTRL(ender);
7324 case '0': case '1': case '2': case '3':case '4':
7325 case '5': case '6': case '7': case '8':case '9':
7327 (isDIGIT(p[1]) && atoi(p) >= RExC_npar) ) {
7330 ender = grok_oct(p, &numlen, &flags, NULL);
7337 if (PL_encoding && ender < 0x100)
7338 goto recode_encoding;
7342 SV* enc = PL_encoding;
7343 ender = reg_recode((const char)(U8)ender, &enc);
7344 if (!enc && SIZE_ONLY && ckWARN(WARN_REGEXP))
7345 vWARN(p, "Invalid escape in the specified encoding");
7351 FAIL("Trailing \\");
7354 if (!SIZE_ONLY&& isALPHA(*p) && ckWARN(WARN_REGEXP))
7355 vWARN2(p + 1, "Unrecognized escape \\%c passed through", UCHARAT(p));
7356 goto normal_default;
7361 if (UTF8_IS_START(*p) && UTF) {
7363 ender = utf8n_to_uvchr((U8*)p, RExC_end - p,
7364 &numlen, UTF8_ALLOW_DEFAULT);
7371 if ( RExC_flags & RXf_PMf_EXTENDED)
7372 p = regwhite( pRExC_state, p );
7374 /* Prime the casefolded buffer. */
7375 ender = toFOLD_uni(ender, tmpbuf, &foldlen);
7377 if (p < RExC_end && ISMULT2(p)) { /* Back off on ?+*. */
7382 /* Emit all the Unicode characters. */
7384 for (foldbuf = tmpbuf;
7386 foldlen -= numlen) {
7387 ender = utf8_to_uvchr(foldbuf, &numlen);
7389 const STRLEN unilen = reguni(pRExC_state, ender, s);
7392 /* In EBCDIC the numlen
7393 * and unilen can differ. */
7395 if (numlen >= foldlen)
7399 break; /* "Can't happen." */
7403 const STRLEN unilen = reguni(pRExC_state, ender, s);
7412 REGC((char)ender, s++);
7418 /* Emit all the Unicode characters. */
7420 for (foldbuf = tmpbuf;
7422 foldlen -= numlen) {
7423 ender = utf8_to_uvchr(foldbuf, &numlen);
7425 const STRLEN unilen = reguni(pRExC_state, ender, s);
7428 /* In EBCDIC the numlen
7429 * and unilen can differ. */
7431 if (numlen >= foldlen)
7439 const STRLEN unilen = reguni(pRExC_state, ender, s);
7448 REGC((char)ender, s++);
7452 Set_Node_Cur_Length(ret); /* MJD */
7453 nextchar(pRExC_state);
7455 /* len is STRLEN which is unsigned, need to copy to signed */
7458 vFAIL("Internal disaster");
7462 if (len == 1 && UNI_IS_INVARIANT(ender))
7466 RExC_size += STR_SZ(len);
7469 RExC_emit += STR_SZ(len);
7479 S_regwhite( RExC_state_t *pRExC_state, char *p )
7481 const char *e = RExC_end;
7485 else if (*p == '#') {
7494 RExC_seen |= REG_SEEN_RUN_ON_COMMENT;
7502 /* Parse POSIX character classes: [[:foo:]], [[=foo=]], [[.foo.]].
7503 Character classes ([:foo:]) can also be negated ([:^foo:]).
7504 Returns a named class id (ANYOF_XXX) if successful, -1 otherwise.
7505 Equivalence classes ([=foo=]) and composites ([.foo.]) are parsed,
7506 but trigger failures because they are currently unimplemented. */
7508 #define POSIXCC_DONE(c) ((c) == ':')
7509 #define POSIXCC_NOTYET(c) ((c) == '=' || (c) == '.')
7510 #define POSIXCC(c) (POSIXCC_DONE(c) || POSIXCC_NOTYET(c))
7513 S_regpposixcc(pTHX_ RExC_state_t *pRExC_state, I32 value)
7516 I32 namedclass = OOB_NAMEDCLASS;
7518 if (value == '[' && RExC_parse + 1 < RExC_end &&
7519 /* I smell either [: or [= or [. -- POSIX has been here, right? */
7520 POSIXCC(UCHARAT(RExC_parse))) {
7521 const char c = UCHARAT(RExC_parse);
7522 char* const s = RExC_parse++;
7524 while (RExC_parse < RExC_end && UCHARAT(RExC_parse) != c)
7526 if (RExC_parse == RExC_end)
7527 /* Grandfather lone [:, [=, [. */
7530 const char* const t = RExC_parse++; /* skip over the c */
7533 if (UCHARAT(RExC_parse) == ']') {
7534 const char *posixcc = s + 1;
7535 RExC_parse++; /* skip over the ending ] */
7538 const I32 complement = *posixcc == '^' ? *posixcc++ : 0;
7539 const I32 skip = t - posixcc;
7541 /* Initially switch on the length of the name. */
7544 if (memEQ(posixcc, "word", 4)) /* this is not POSIX, this is the Perl \w */
7545 namedclass = complement ? ANYOF_NALNUM : ANYOF_ALNUM;
7548 /* Names all of length 5. */
7549 /* alnum alpha ascii blank cntrl digit graph lower
7550 print punct space upper */
7551 /* Offset 4 gives the best switch position. */
7552 switch (posixcc[4]) {
7554 if (memEQ(posixcc, "alph", 4)) /* alpha */
7555 namedclass = complement ? ANYOF_NALPHA : ANYOF_ALPHA;
7558 if (memEQ(posixcc, "spac", 4)) /* space */
7559 namedclass = complement ? ANYOF_NPSXSPC : ANYOF_PSXSPC;
7562 if (memEQ(posixcc, "grap", 4)) /* graph */
7563 namedclass = complement ? ANYOF_NGRAPH : ANYOF_GRAPH;
7566 if (memEQ(posixcc, "asci", 4)) /* ascii */
7567 namedclass = complement ? ANYOF_NASCII : ANYOF_ASCII;
7570 if (memEQ(posixcc, "blan", 4)) /* blank */
7571 namedclass = complement ? ANYOF_NBLANK : ANYOF_BLANK;
7574 if (memEQ(posixcc, "cntr", 4)) /* cntrl */
7575 namedclass = complement ? ANYOF_NCNTRL : ANYOF_CNTRL;
7578 if (memEQ(posixcc, "alnu", 4)) /* alnum */
7579 namedclass = complement ? ANYOF_NALNUMC : ANYOF_ALNUMC;
7582 if (memEQ(posixcc, "lowe", 4)) /* lower */
7583 namedclass = complement ? ANYOF_NLOWER : ANYOF_LOWER;
7584 else if (memEQ(posixcc, "uppe", 4)) /* upper */
7585 namedclass = complement ? ANYOF_NUPPER : ANYOF_UPPER;
7588 if (memEQ(posixcc, "digi", 4)) /* digit */
7589 namedclass = complement ? ANYOF_NDIGIT : ANYOF_DIGIT;
7590 else if (memEQ(posixcc, "prin", 4)) /* print */
7591 namedclass = complement ? ANYOF_NPRINT : ANYOF_PRINT;
7592 else if (memEQ(posixcc, "punc", 4)) /* punct */
7593 namedclass = complement ? ANYOF_NPUNCT : ANYOF_PUNCT;
7598 if (memEQ(posixcc, "xdigit", 6))
7599 namedclass = complement ? ANYOF_NXDIGIT : ANYOF_XDIGIT;
7603 if (namedclass == OOB_NAMEDCLASS)
7604 Simple_vFAIL3("POSIX class [:%.*s:] unknown",
7606 assert (posixcc[skip] == ':');
7607 assert (posixcc[skip+1] == ']');
7608 } else if (!SIZE_ONLY) {
7609 /* [[=foo=]] and [[.foo.]] are still future. */
7611 /* adjust RExC_parse so the warning shows after
7613 while (UCHARAT(RExC_parse) && UCHARAT(RExC_parse) != ']')
7615 Simple_vFAIL3("POSIX syntax [%c %c] is reserved for future extensions", c, c);
7618 /* Maternal grandfather:
7619 * "[:" ending in ":" but not in ":]" */
7629 S_checkposixcc(pTHX_ RExC_state_t *pRExC_state)
7632 if (POSIXCC(UCHARAT(RExC_parse))) {
7633 const char *s = RExC_parse;
7634 const char c = *s++;
7638 if (*s && c == *s && s[1] == ']') {
7639 if (ckWARN(WARN_REGEXP))
7641 "POSIX syntax [%c %c] belongs inside character classes",
7644 /* [[=foo=]] and [[.foo.]] are still future. */
7645 if (POSIXCC_NOTYET(c)) {
7646 /* adjust RExC_parse so the error shows after
7648 while (UCHARAT(RExC_parse) && UCHARAT(RExC_parse++) != ']')
7650 Simple_vFAIL3("POSIX syntax [%c %c] is reserved for future extensions", c, c);
7657 #define _C_C_T_(NAME,TEST,WORD) \
7660 ANYOF_CLASS_SET(ret, ANYOF_##NAME); \
7662 for (value = 0; value < 256; value++) \
7664 ANYOF_BITMAP_SET(ret, value); \
7669 case ANYOF_N##NAME: \
7671 ANYOF_CLASS_SET(ret, ANYOF_N##NAME); \
7673 for (value = 0; value < 256; value++) \
7675 ANYOF_BITMAP_SET(ret, value); \
7681 #define _C_C_T_NOLOC_(NAME,TEST,WORD) \
7683 for (value = 0; value < 256; value++) \
7685 ANYOF_BITMAP_SET(ret, value); \
7689 case ANYOF_N##NAME: \
7690 for (value = 0; value < 256; value++) \
7692 ANYOF_BITMAP_SET(ret, value); \
7698 parse a class specification and produce either an ANYOF node that
7699 matches the pattern or if the pattern matches a single char only and
7700 that char is < 256 and we are case insensitive then we produce an
7705 S_regclass(pTHX_ RExC_state_t *pRExC_state, U32 depth)
7708 register UV nextvalue;
7709 register IV prevvalue = OOB_UNICODE;
7710 register IV range = 0;
7711 UV value = 0; /* XXX:dmq: needs to be referenceable (unfortunately) */
7712 register regnode *ret;
7715 char *rangebegin = NULL;
7716 bool need_class = 0;
7719 bool optimize_invert = TRUE;
7720 AV* unicode_alternate = NULL;
7722 UV literal_endpoint = 0;
7724 UV stored = 0; /* number of chars stored in the class */
7726 regnode * const orig_emit = RExC_emit; /* Save the original RExC_emit in
7727 case we need to change the emitted regop to an EXACT. */
7728 const char * orig_parse = RExC_parse;
7729 GET_RE_DEBUG_FLAGS_DECL;
7731 PERL_UNUSED_ARG(depth);
7734 DEBUG_PARSE("clas");
7736 /* Assume we are going to generate an ANYOF node. */
7737 ret = reganode(pRExC_state, ANYOF, 0);
7740 ANYOF_FLAGS(ret) = 0;
7742 if (UCHARAT(RExC_parse) == '^') { /* Complement of range. */
7746 ANYOF_FLAGS(ret) |= ANYOF_INVERT;
7750 RExC_size += ANYOF_SKIP;
7751 listsv = &PL_sv_undef; /* For code scanners: listsv always non-NULL. */
7754 RExC_emit += ANYOF_SKIP;
7756 ANYOF_FLAGS(ret) |= ANYOF_FOLD;
7758 ANYOF_FLAGS(ret) |= ANYOF_LOCALE;
7759 ANYOF_BITMAP_ZERO(ret);
7760 listsv = newSVpvs("# comment\n");
7763 nextvalue = RExC_parse < RExC_end ? UCHARAT(RExC_parse) : 0;
7765 if (!SIZE_ONLY && POSIXCC(nextvalue))
7766 checkposixcc(pRExC_state);
7768 /* allow 1st char to be ] (allowing it to be - is dealt with later) */
7769 if (UCHARAT(RExC_parse) == ']')
7773 while (RExC_parse < RExC_end && UCHARAT(RExC_parse) != ']') {
7777 namedclass = OOB_NAMEDCLASS; /* initialize as illegal */
7780 rangebegin = RExC_parse;
7782 value = utf8n_to_uvchr((U8*)RExC_parse,
7783 RExC_end - RExC_parse,
7784 &numlen, UTF8_ALLOW_DEFAULT);
7785 RExC_parse += numlen;
7788 value = UCHARAT(RExC_parse++);
7790 nextvalue = RExC_parse < RExC_end ? UCHARAT(RExC_parse) : 0;
7791 if (value == '[' && POSIXCC(nextvalue))
7792 namedclass = regpposixcc(pRExC_state, value);
7793 else if (value == '\\') {
7795 value = utf8n_to_uvchr((U8*)RExC_parse,
7796 RExC_end - RExC_parse,
7797 &numlen, UTF8_ALLOW_DEFAULT);
7798 RExC_parse += numlen;
7801 value = UCHARAT(RExC_parse++);
7802 /* Some compilers cannot handle switching on 64-bit integer
7803 * values, therefore value cannot be an UV. Yes, this will
7804 * be a problem later if we want switch on Unicode.
7805 * A similar issue a little bit later when switching on
7806 * namedclass. --jhi */
7807 switch ((I32)value) {
7808 case 'w': namedclass = ANYOF_ALNUM; break;
7809 case 'W': namedclass = ANYOF_NALNUM; break;
7810 case 's': namedclass = ANYOF_SPACE; break;
7811 case 'S': namedclass = ANYOF_NSPACE; break;
7812 case 'd': namedclass = ANYOF_DIGIT; break;
7813 case 'D': namedclass = ANYOF_NDIGIT; break;
7814 case 'v': namedclass = ANYOF_VERTWS; break;
7815 case 'V': namedclass = ANYOF_NVERTWS; break;
7816 case 'h': namedclass = ANYOF_HORIZWS; break;
7817 case 'H': namedclass = ANYOF_NHORIZWS; break;
7818 case 'N': /* Handle \N{NAME} in class */
7820 /* We only pay attention to the first char of
7821 multichar strings being returned. I kinda wonder
7822 if this makes sense as it does change the behaviour
7823 from earlier versions, OTOH that behaviour was broken
7825 UV v; /* value is register so we cant & it /grrr */
7826 if (reg_namedseq(pRExC_state, &v)) {
7836 if (RExC_parse >= RExC_end)
7837 vFAIL2("Empty \\%c{}", (U8)value);
7838 if (*RExC_parse == '{') {
7839 const U8 c = (U8)value;
7840 e = strchr(RExC_parse++, '}');
7842 vFAIL2("Missing right brace on \\%c{}", c);
7843 while (isSPACE(UCHARAT(RExC_parse)))
7845 if (e == RExC_parse)
7846 vFAIL2("Empty \\%c{}", c);
7848 while (isSPACE(UCHARAT(RExC_parse + n - 1)))
7856 if (UCHARAT(RExC_parse) == '^') {
7859 value = value == 'p' ? 'P' : 'p'; /* toggle */
7860 while (isSPACE(UCHARAT(RExC_parse))) {
7865 Perl_sv_catpvf(aTHX_ listsv, "%cutf8::%.*s\n",
7866 (value=='p' ? '+' : '!'), (int)n, RExC_parse);
7869 ANYOF_FLAGS(ret) |= ANYOF_UNICODE;
7870 namedclass = ANYOF_MAX; /* no official name, but it's named */
7873 case 'n': value = '\n'; break;
7874 case 'r': value = '\r'; break;
7875 case 't': value = '\t'; break;
7876 case 'f': value = '\f'; break;
7877 case 'b': value = '\b'; break;
7878 case 'e': value = ASCII_TO_NATIVE('\033');break;
7879 case 'a': value = ASCII_TO_NATIVE('\007');break;
7881 if (*RExC_parse == '{') {
7882 I32 flags = PERL_SCAN_ALLOW_UNDERSCORES
7883 | PERL_SCAN_DISALLOW_PREFIX;
7884 char * const e = strchr(RExC_parse++, '}');
7886 vFAIL("Missing right brace on \\x{}");
7888 numlen = e - RExC_parse;
7889 value = grok_hex(RExC_parse, &numlen, &flags, NULL);
7893 I32 flags = PERL_SCAN_DISALLOW_PREFIX;
7895 value = grok_hex(RExC_parse, &numlen, &flags, NULL);
7896 RExC_parse += numlen;
7898 if (PL_encoding && value < 0x100)
7899 goto recode_encoding;
7902 value = UCHARAT(RExC_parse++);
7903 value = toCTRL(value);
7905 case '0': case '1': case '2': case '3': case '4':
7906 case '5': case '6': case '7': case '8': case '9':
7910 value = grok_oct(--RExC_parse, &numlen, &flags, NULL);
7911 RExC_parse += numlen;
7912 if (PL_encoding && value < 0x100)
7913 goto recode_encoding;
7918 SV* enc = PL_encoding;
7919 value = reg_recode((const char)(U8)value, &enc);
7920 if (!enc && SIZE_ONLY && ckWARN(WARN_REGEXP))
7922 "Invalid escape in the specified encoding");
7926 if (!SIZE_ONLY && isALPHA(value) && ckWARN(WARN_REGEXP))
7928 "Unrecognized escape \\%c in character class passed through",
7932 } /* end of \blah */
7938 if (namedclass > OOB_NAMEDCLASS) { /* this is a named class \blah */
7940 if (!SIZE_ONLY && !need_class)
7941 ANYOF_CLASS_ZERO(ret);
7945 /* a bad range like a-\d, a-[:digit:] ? */
7948 if (ckWARN(WARN_REGEXP)) {
7950 RExC_parse >= rangebegin ?
7951 RExC_parse - rangebegin : 0;
7953 "False [] range \"%*.*s\"",
7956 if (prevvalue < 256) {
7957 ANYOF_BITMAP_SET(ret, prevvalue);
7958 ANYOF_BITMAP_SET(ret, '-');
7961 ANYOF_FLAGS(ret) |= ANYOF_UNICODE;
7962 Perl_sv_catpvf(aTHX_ listsv,
7963 "%04"UVxf"\n%04"UVxf"\n", (UV)prevvalue, (UV) '-');
7967 range = 0; /* this was not a true range */
7973 const char *what = NULL;
7976 if (namedclass > OOB_NAMEDCLASS)
7977 optimize_invert = FALSE;
7978 /* Possible truncation here but in some 64-bit environments
7979 * the compiler gets heartburn about switch on 64-bit values.
7980 * A similar issue a little earlier when switching on value.
7982 switch ((I32)namedclass) {
7983 case _C_C_T_(ALNUM, isALNUM(value), "Word");
7984 case _C_C_T_(ALNUMC, isALNUMC(value), "Alnum");
7985 case _C_C_T_(ALPHA, isALPHA(value), "Alpha");
7986 case _C_C_T_(BLANK, isBLANK(value), "Blank");
7987 case _C_C_T_(CNTRL, isCNTRL(value), "Cntrl");
7988 case _C_C_T_(GRAPH, isGRAPH(value), "Graph");
7989 case _C_C_T_(LOWER, isLOWER(value), "Lower");
7990 case _C_C_T_(PRINT, isPRINT(value), "Print");
7991 case _C_C_T_(PSXSPC, isPSXSPC(value), "Space");
7992 case _C_C_T_(PUNCT, isPUNCT(value), "Punct");
7993 case _C_C_T_(SPACE, isSPACE(value), "SpacePerl");
7994 case _C_C_T_(UPPER, isUPPER(value), "Upper");
7995 case _C_C_T_(XDIGIT, isXDIGIT(value), "XDigit");
7996 case _C_C_T_NOLOC_(VERTWS, is_VERTWS_latin1(&value), "VertSpace");
7997 case _C_C_T_NOLOC_(HORIZWS, is_HORIZWS_latin1(&value), "HorizSpace");
8000 ANYOF_CLASS_SET(ret, ANYOF_ASCII);
8003 for (value = 0; value < 128; value++)
8004 ANYOF_BITMAP_SET(ret, value);
8006 for (value = 0; value < 256; value++) {
8008 ANYOF_BITMAP_SET(ret, value);
8017 ANYOF_CLASS_SET(ret, ANYOF_NASCII);
8020 for (value = 128; value < 256; value++)
8021 ANYOF_BITMAP_SET(ret, value);
8023 for (value = 0; value < 256; value++) {
8024 if (!isASCII(value))
8025 ANYOF_BITMAP_SET(ret, value);
8034 ANYOF_CLASS_SET(ret, ANYOF_DIGIT);
8036 /* consecutive digits assumed */
8037 for (value = '0'; value <= '9'; value++)
8038 ANYOF_BITMAP_SET(ret, value);
8045 ANYOF_CLASS_SET(ret, ANYOF_NDIGIT);
8047 /* consecutive digits assumed */
8048 for (value = 0; value < '0'; value++)
8049 ANYOF_BITMAP_SET(ret, value);
8050 for (value = '9' + 1; value < 256; value++)
8051 ANYOF_BITMAP_SET(ret, value);
8057 /* this is to handle \p and \P */
8060 vFAIL("Invalid [::] class");
8064 /* Strings such as "+utf8::isWord\n" */
8065 Perl_sv_catpvf(aTHX_ listsv, "%cutf8::Is%s\n", yesno, what);
8068 ANYOF_FLAGS(ret) |= ANYOF_CLASS;
8071 } /* end of namedclass \blah */
8074 if (prevvalue > (IV)value) /* b-a */ {
8075 const int w = RExC_parse - rangebegin;
8076 Simple_vFAIL4("Invalid [] range \"%*.*s\"", w, w, rangebegin);
8077 range = 0; /* not a valid range */
8081 prevvalue = value; /* save the beginning of the range */
8082 if (*RExC_parse == '-' && RExC_parse+1 < RExC_end &&
8083 RExC_parse[1] != ']') {
8086 /* a bad range like \w-, [:word:]- ? */
8087 if (namedclass > OOB_NAMEDCLASS) {
8088 if (ckWARN(WARN_REGEXP)) {
8090 RExC_parse >= rangebegin ?
8091 RExC_parse - rangebegin : 0;
8093 "False [] range \"%*.*s\"",
8097 ANYOF_BITMAP_SET(ret, '-');
8099 range = 1; /* yeah, it's a range! */
8100 continue; /* but do it the next time */
8104 /* now is the next time */
8105 /*stored += (value - prevvalue + 1);*/
8107 if (prevvalue < 256) {
8108 const IV ceilvalue = value < 256 ? value : 255;
8111 /* In EBCDIC [\x89-\x91] should include
8112 * the \x8e but [i-j] should not. */
8113 if (literal_endpoint == 2 &&
8114 ((isLOWER(prevvalue) && isLOWER(ceilvalue)) ||
8115 (isUPPER(prevvalue) && isUPPER(ceilvalue))))
8117 if (isLOWER(prevvalue)) {
8118 for (i = prevvalue; i <= ceilvalue; i++)
8119 if (isLOWER(i) && !ANYOF_BITMAP_TEST(ret,i)) {
8121 ANYOF_BITMAP_SET(ret, i);
8124 for (i = prevvalue; i <= ceilvalue; i++)
8125 if (isUPPER(i) && !ANYOF_BITMAP_TEST(ret,i)) {
8127 ANYOF_BITMAP_SET(ret, i);
8133 for (i = prevvalue; i <= ceilvalue; i++) {
8134 if (!ANYOF_BITMAP_TEST(ret,i)) {
8136 ANYOF_BITMAP_SET(ret, i);
8140 if (value > 255 || UTF) {
8141 const UV prevnatvalue = NATIVE_TO_UNI(prevvalue);
8142 const UV natvalue = NATIVE_TO_UNI(value);
8143 stored+=2; /* can't optimize this class */
8144 ANYOF_FLAGS(ret) |= ANYOF_UNICODE;
8145 if (prevnatvalue < natvalue) { /* what about > ? */
8146 Perl_sv_catpvf(aTHX_ listsv, "%04"UVxf"\t%04"UVxf"\n",
8147 prevnatvalue, natvalue);
8149 else if (prevnatvalue == natvalue) {
8150 Perl_sv_catpvf(aTHX_ listsv, "%04"UVxf"\n", natvalue);
8152 U8 foldbuf[UTF8_MAXBYTES_CASE+1];
8154 const UV f = to_uni_fold(natvalue, foldbuf, &foldlen);
8156 #ifdef EBCDIC /* RD t/uni/fold ff and 6b */
8157 if (RExC_precomp[0] == ':' &&
8158 RExC_precomp[1] == '[' &&
8159 (f == 0xDF || f == 0x92)) {
8160 f = NATIVE_TO_UNI(f);
8163 /* If folding and foldable and a single
8164 * character, insert also the folded version
8165 * to the charclass. */
8167 #ifdef EBCDIC /* RD tunifold ligatures s,t fb05, fb06 */
8168 if ((RExC_precomp[0] == ':' &&
8169 RExC_precomp[1] == '[' &&
8171 (value == 0xFB05 || value == 0xFB06))) ?
8172 foldlen == ((STRLEN)UNISKIP(f) - 1) :
8173 foldlen == (STRLEN)UNISKIP(f) )
8175 if (foldlen == (STRLEN)UNISKIP(f))
8177 Perl_sv_catpvf(aTHX_ listsv,
8180 /* Any multicharacter foldings
8181 * require the following transform:
8182 * [ABCDEF] -> (?:[ABCabcDEFd]|pq|rst)
8183 * where E folds into "pq" and F folds
8184 * into "rst", all other characters
8185 * fold to single characters. We save
8186 * away these multicharacter foldings,
8187 * to be later saved as part of the
8188 * additional "s" data. */
8191 if (!unicode_alternate)
8192 unicode_alternate = newAV();
8193 sv = newSVpvn_utf8((char*)foldbuf, foldlen,
8195 av_push(unicode_alternate, sv);
8199 /* If folding and the value is one of the Greek
8200 * sigmas insert a few more sigmas to make the
8201 * folding rules of the sigmas to work right.
8202 * Note that not all the possible combinations
8203 * are handled here: some of them are handled
8204 * by the standard folding rules, and some of
8205 * them (literal or EXACTF cases) are handled
8206 * during runtime in regexec.c:S_find_byclass(). */
8207 if (value == UNICODE_GREEK_SMALL_LETTER_FINAL_SIGMA) {
8208 Perl_sv_catpvf(aTHX_ listsv, "%04"UVxf"\n",
8209 (UV)UNICODE_GREEK_CAPITAL_LETTER_SIGMA);
8210 Perl_sv_catpvf(aTHX_ listsv, "%04"UVxf"\n",
8211 (UV)UNICODE_GREEK_SMALL_LETTER_SIGMA);
8213 else if (value == UNICODE_GREEK_CAPITAL_LETTER_SIGMA)
8214 Perl_sv_catpvf(aTHX_ listsv, "%04"UVxf"\n",
8215 (UV)UNICODE_GREEK_SMALL_LETTER_SIGMA);
8220 literal_endpoint = 0;
8224 range = 0; /* this range (if it was one) is done now */
8228 ANYOF_FLAGS(ret) |= ANYOF_LARGE;
8230 RExC_size += ANYOF_CLASS_ADD_SKIP;
8232 RExC_emit += ANYOF_CLASS_ADD_SKIP;
8238 /****** !SIZE_ONLY AFTER HERE *********/
8240 if( stored == 1 && (value < 128 || (value < 256 && !UTF))
8241 && !( ANYOF_FLAGS(ret) & ( ANYOF_FLAGS_ALL ^ ANYOF_FOLD ) )
8243 /* optimize single char class to an EXACT node
8244 but *only* when its not a UTF/high char */
8245 const char * cur_parse= RExC_parse;
8246 RExC_emit = (regnode *)orig_emit;
8247 RExC_parse = (char *)orig_parse;
8248 ret = reg_node(pRExC_state,
8249 (U8)((ANYOF_FLAGS(ret) & ANYOF_FOLD) ? EXACTF : EXACT));
8250 RExC_parse = (char *)cur_parse;
8251 *STRING(ret)= (char)value;
8253 RExC_emit += STR_SZ(1);
8256 /* optimize case-insensitive simple patterns (e.g. /[a-z]/i) */
8257 if ( /* If the only flag is folding (plus possibly inversion). */
8258 ((ANYOF_FLAGS(ret) & (ANYOF_FLAGS_ALL ^ ANYOF_INVERT)) == ANYOF_FOLD)
8260 for (value = 0; value < 256; ++value) {
8261 if (ANYOF_BITMAP_TEST(ret, value)) {
8262 UV fold = PL_fold[value];
8265 ANYOF_BITMAP_SET(ret, fold);
8268 ANYOF_FLAGS(ret) &= ~ANYOF_FOLD;
8271 /* optimize inverted simple patterns (e.g. [^a-z]) */
8272 if (optimize_invert &&
8273 /* If the only flag is inversion. */
8274 (ANYOF_FLAGS(ret) & ANYOF_FLAGS_ALL) == ANYOF_INVERT) {
8275 for (value = 0; value < ANYOF_BITMAP_SIZE; ++value)
8276 ANYOF_BITMAP(ret)[value] ^= ANYOF_FLAGS_ALL;
8277 ANYOF_FLAGS(ret) = ANYOF_UNICODE_ALL;
8280 AV * const av = newAV();
8282 /* The 0th element stores the character class description
8283 * in its textual form: used later (regexec.c:Perl_regclass_swash())
8284 * to initialize the appropriate swash (which gets stored in
8285 * the 1st element), and also useful for dumping the regnode.
8286 * The 2nd element stores the multicharacter foldings,
8287 * used later (regexec.c:S_reginclass()). */
8288 av_store(av, 0, listsv);
8289 av_store(av, 1, NULL);
8290 av_store(av, 2, (SV*)unicode_alternate);
8291 rv = newRV_noinc((SV*)av);
8292 n = add_data(pRExC_state, 1, "s");
8293 RExC_rxi->data->data[n] = (void*)rv;
8301 /* reg_skipcomment()
8303 Absorbs an /x style # comments from the input stream.
8304 Returns true if there is more text remaining in the stream.
8305 Will set the REG_SEEN_RUN_ON_COMMENT flag if the comment
8306 terminates the pattern without including a newline.
8308 Note its the callers responsibility to ensure that we are
8314 S_reg_skipcomment(pTHX_ RExC_state_t *pRExC_state)
8317 while (RExC_parse < RExC_end)
8318 if (*RExC_parse++ == '\n') {
8323 /* we ran off the end of the pattern without ending
8324 the comment, so we have to add an \n when wrapping */
8325 RExC_seen |= REG_SEEN_RUN_ON_COMMENT;
8333 Advance that parse position, and optionall absorbs
8334 "whitespace" from the inputstream.
8336 Without /x "whitespace" means (?#...) style comments only,
8337 with /x this means (?#...) and # comments and whitespace proper.
8339 Returns the RExC_parse point from BEFORE the scan occurs.
8341 This is the /x friendly way of saying RExC_parse++.
8345 S_nextchar(pTHX_ RExC_state_t *pRExC_state)
8347 char* const retval = RExC_parse++;
8350 if (*RExC_parse == '(' && RExC_parse[1] == '?' &&
8351 RExC_parse[2] == '#') {
8352 while (*RExC_parse != ')') {
8353 if (RExC_parse == RExC_end)
8354 FAIL("Sequence (?#... not terminated");
8360 if (RExC_flags & RXf_PMf_EXTENDED) {
8361 if (isSPACE(*RExC_parse)) {
8365 else if (*RExC_parse == '#') {
8366 if ( reg_skipcomment( pRExC_state ) )
8375 - reg_node - emit a node
8377 STATIC regnode * /* Location. */
8378 S_reg_node(pTHX_ RExC_state_t *pRExC_state, U8 op)
8381 register regnode *ptr;
8382 regnode * const ret = RExC_emit;
8383 GET_RE_DEBUG_FLAGS_DECL;
8386 SIZE_ALIGN(RExC_size);
8390 if (RExC_emit >= RExC_emit_bound)
8391 Perl_croak(aTHX_ "panic: reg_node overrun trying to emit %d", op);
8393 NODE_ALIGN_FILL(ret);
8395 FILL_ADVANCE_NODE(ptr, op);
8396 #ifdef RE_TRACK_PATTERN_OFFSETS
8397 if (RExC_offsets) { /* MJD */
8398 MJD_OFFSET_DEBUG(("%s:%d: (op %s) %s %"UVuf" (len %"UVuf") (max %"UVuf").\n",
8399 "reg_node", __LINE__,
8401 (UV)(RExC_emit - RExC_emit_start) > RExC_offsets[0]
8402 ? "Overwriting end of array!\n" : "OK",
8403 (UV)(RExC_emit - RExC_emit_start),
8404 (UV)(RExC_parse - RExC_start),
8405 (UV)RExC_offsets[0]));
8406 Set_Node_Offset(RExC_emit, RExC_parse + (op == END));
8414 - reganode - emit a node with an argument
8416 STATIC regnode * /* Location. */
8417 S_reganode(pTHX_ RExC_state_t *pRExC_state, U8 op, U32 arg)
8420 register regnode *ptr;
8421 regnode * const ret = RExC_emit;
8422 GET_RE_DEBUG_FLAGS_DECL;
8425 SIZE_ALIGN(RExC_size);
8430 assert(2==regarglen[op]+1);
8432 Anything larger than this has to allocate the extra amount.
8433 If we changed this to be:
8435 RExC_size += (1 + regarglen[op]);
8437 then it wouldn't matter. Its not clear what side effect
8438 might come from that so its not done so far.
8443 if (RExC_emit >= RExC_emit_bound)
8444 Perl_croak(aTHX_ "panic: reg_node overrun trying to emit %d", op);
8446 NODE_ALIGN_FILL(ret);
8448 FILL_ADVANCE_NODE_ARG(ptr, op, arg);
8449 #ifdef RE_TRACK_PATTERN_OFFSETS
8450 if (RExC_offsets) { /* MJD */
8451 MJD_OFFSET_DEBUG(("%s(%d): (op %s) %s %"UVuf" <- %"UVuf" (max %"UVuf").\n",
8455 (UV)(RExC_emit - RExC_emit_start) > RExC_offsets[0] ?
8456 "Overwriting end of array!\n" : "OK",
8457 (UV)(RExC_emit - RExC_emit_start),
8458 (UV)(RExC_parse - RExC_start),
8459 (UV)RExC_offsets[0]));
8460 Set_Cur_Node_Offset;
8468 - reguni - emit (if appropriate) a Unicode character
8471 S_reguni(pTHX_ const RExC_state_t *pRExC_state, UV uv, char* s)
8474 return SIZE_ONLY ? UNISKIP(uv) : (uvchr_to_utf8((U8*)s, uv) - (U8*)s);
8478 - reginsert - insert an operator in front of already-emitted operand
8480 * Means relocating the operand.
8483 S_reginsert(pTHX_ RExC_state_t *pRExC_state, U8 op, regnode *opnd, U32 depth)
8486 register regnode *src;
8487 register regnode *dst;
8488 register regnode *place;
8489 const int offset = regarglen[(U8)op];
8490 const int size = NODE_STEP_REGNODE + offset;
8491 GET_RE_DEBUG_FLAGS_DECL;
8492 PERL_UNUSED_ARG(depth);
8493 /* (PL_regkind[(U8)op] == CURLY ? EXTRA_STEP_2ARGS : 0); */
8494 DEBUG_PARSE_FMT("inst"," - %s",PL_reg_name[op]);
8503 if (RExC_open_parens) {
8505 /*DEBUG_PARSE_FMT("inst"," - %"IVdf, (IV)RExC_npar);*/
8506 for ( paren=0 ; paren < RExC_npar ; paren++ ) {
8507 if ( RExC_open_parens[paren] >= opnd ) {
8508 /*DEBUG_PARSE_FMT("open"," - %d",size);*/
8509 RExC_open_parens[paren] += size;
8511 /*DEBUG_PARSE_FMT("open"," - %s","ok");*/
8513 if ( RExC_close_parens[paren] >= opnd ) {
8514 /*DEBUG_PARSE_FMT("close"," - %d",size);*/
8515 RExC_close_parens[paren] += size;
8517 /*DEBUG_PARSE_FMT("close"," - %s","ok");*/
8522 while (src > opnd) {
8523 StructCopy(--src, --dst, regnode);
8524 #ifdef RE_TRACK_PATTERN_OFFSETS
8525 if (RExC_offsets) { /* MJD 20010112 */
8526 MJD_OFFSET_DEBUG(("%s(%d): (op %s) %s copy %"UVuf" -> %"UVuf" (max %"UVuf").\n",
8530 (UV)(dst - RExC_emit_start) > RExC_offsets[0]
8531 ? "Overwriting end of array!\n" : "OK",
8532 (UV)(src - RExC_emit_start),
8533 (UV)(dst - RExC_emit_start),
8534 (UV)RExC_offsets[0]));
8535 Set_Node_Offset_To_R(dst-RExC_emit_start, Node_Offset(src));
8536 Set_Node_Length_To_R(dst-RExC_emit_start, Node_Length(src));
8542 place = opnd; /* Op node, where operand used to be. */
8543 #ifdef RE_TRACK_PATTERN_OFFSETS
8544 if (RExC_offsets) { /* MJD */
8545 MJD_OFFSET_DEBUG(("%s(%d): (op %s) %s %"UVuf" <- %"UVuf" (max %"UVuf").\n",
8549 (UV)(place - RExC_emit_start) > RExC_offsets[0]
8550 ? "Overwriting end of array!\n" : "OK",
8551 (UV)(place - RExC_emit_start),
8552 (UV)(RExC_parse - RExC_start),
8553 (UV)RExC_offsets[0]));
8554 Set_Node_Offset(place, RExC_parse);
8555 Set_Node_Length(place, 1);
8558 src = NEXTOPER(place);
8559 FILL_ADVANCE_NODE(place, op);
8560 Zero(src, offset, regnode);
8564 - regtail - set the next-pointer at the end of a node chain of p to val.
8565 - SEE ALSO: regtail_study
8567 /* TODO: All three parms should be const */
8569 S_regtail(pTHX_ RExC_state_t *pRExC_state, regnode *p, const regnode *val,U32 depth)
8572 register regnode *scan;
8573 GET_RE_DEBUG_FLAGS_DECL;
8575 PERL_UNUSED_ARG(depth);
8581 /* Find last node. */
8584 regnode * const temp = regnext(scan);
8586 SV * const mysv=sv_newmortal();
8587 DEBUG_PARSE_MSG((scan==p ? "tail" : ""));
8588 regprop(RExC_rx, mysv, scan);
8589 PerlIO_printf(Perl_debug_log, "~ %s (%d) %s %s\n",
8590 SvPV_nolen_const(mysv), REG_NODE_NUM(scan),
8591 (temp == NULL ? "->" : ""),
8592 (temp == NULL ? PL_reg_name[OP(val)] : "")
8600 if (reg_off_by_arg[OP(scan)]) {
8601 ARG_SET(scan, val - scan);
8604 NEXT_OFF(scan) = val - scan;
8610 - regtail_study - set the next-pointer at the end of a node chain of p to val.
8611 - Look for optimizable sequences at the same time.
8612 - currently only looks for EXACT chains.
8614 This is expermental code. The idea is to use this routine to perform
8615 in place optimizations on branches and groups as they are constructed,
8616 with the long term intention of removing optimization from study_chunk so
8617 that it is purely analytical.
8619 Currently only used when in DEBUG mode. The macro REGTAIL_STUDY() is used
8620 to control which is which.
8623 /* TODO: All four parms should be const */
8626 S_regtail_study(pTHX_ RExC_state_t *pRExC_state, regnode *p, const regnode *val,U32 depth)
8629 register regnode *scan;
8631 #ifdef EXPERIMENTAL_INPLACESCAN
8635 GET_RE_DEBUG_FLAGS_DECL;
8641 /* Find last node. */
8645 regnode * const temp = regnext(scan);
8646 #ifdef EXPERIMENTAL_INPLACESCAN
8647 if (PL_regkind[OP(scan)] == EXACT)
8648 if (join_exact(pRExC_state,scan,&min,1,val,depth+1))
8656 if( exact == PSEUDO )
8658 else if ( exact != OP(scan) )
8667 SV * const mysv=sv_newmortal();
8668 DEBUG_PARSE_MSG((scan==p ? "tsdy" : ""));
8669 regprop(RExC_rx, mysv, scan);
8670 PerlIO_printf(Perl_debug_log, "~ %s (%d) -> %s\n",
8671 SvPV_nolen_const(mysv),
8673 PL_reg_name[exact]);
8680 SV * const mysv_val=sv_newmortal();
8681 DEBUG_PARSE_MSG("");
8682 regprop(RExC_rx, mysv_val, val);
8683 PerlIO_printf(Perl_debug_log, "~ attach to %s (%"IVdf") offset to %"IVdf"\n",
8684 SvPV_nolen_const(mysv_val),
8685 (IV)REG_NODE_NUM(val),
8689 if (reg_off_by_arg[OP(scan)]) {
8690 ARG_SET(scan, val - scan);
8693 NEXT_OFF(scan) = val - scan;
8701 - regcurly - a little FSA that accepts {\d+,?\d*}
8704 S_regcurly(register const char *s)
8723 - regdump - dump a regexp onto Perl_debug_log in vaguely comprehensible form
8727 S_regdump_extflags(pTHX_ const char *lead, const U32 flags) {
8730 for (bit=0; bit<32; bit++) {
8731 if (flags & (1<<bit)) {
8733 PerlIO_printf(Perl_debug_log, "%s",lead);
8734 PerlIO_printf(Perl_debug_log, "%s ",PL_reg_extflags_name[bit]);
8739 PerlIO_printf(Perl_debug_log, "\n");
8741 PerlIO_printf(Perl_debug_log, "%s[none-set]\n",lead);
8747 Perl_regdump(pTHX_ const regexp *r)
8751 SV * const sv = sv_newmortal();
8752 SV *dsv= sv_newmortal();
8754 GET_RE_DEBUG_FLAGS_DECL;
8756 (void)dumpuntil(r, ri->program, ri->program + 1, NULL, NULL, sv, 0, 0);
8758 /* Header fields of interest. */
8759 if (r->anchored_substr) {
8760 RE_PV_QUOTED_DECL(s, 0, dsv, SvPVX_const(r->anchored_substr),
8761 RE_SV_DUMPLEN(r->anchored_substr), 30);
8762 PerlIO_printf(Perl_debug_log,
8763 "anchored %s%s at %"IVdf" ",
8764 s, RE_SV_TAIL(r->anchored_substr),
8765 (IV)r->anchored_offset);
8766 } else if (r->anchored_utf8) {
8767 RE_PV_QUOTED_DECL(s, 1, dsv, SvPVX_const(r->anchored_utf8),
8768 RE_SV_DUMPLEN(r->anchored_utf8), 30);
8769 PerlIO_printf(Perl_debug_log,
8770 "anchored utf8 %s%s at %"IVdf" ",
8771 s, RE_SV_TAIL(r->anchored_utf8),
8772 (IV)r->anchored_offset);
8774 if (r->float_substr) {
8775 RE_PV_QUOTED_DECL(s, 0, dsv, SvPVX_const(r->float_substr),
8776 RE_SV_DUMPLEN(r->float_substr), 30);
8777 PerlIO_printf(Perl_debug_log,
8778 "floating %s%s at %"IVdf"..%"UVuf" ",
8779 s, RE_SV_TAIL(r->float_substr),
8780 (IV)r->float_min_offset, (UV)r->float_max_offset);
8781 } else if (r->float_utf8) {
8782 RE_PV_QUOTED_DECL(s, 1, dsv, SvPVX_const(r->float_utf8),
8783 RE_SV_DUMPLEN(r->float_utf8), 30);
8784 PerlIO_printf(Perl_debug_log,
8785 "floating utf8 %s%s at %"IVdf"..%"UVuf" ",
8786 s, RE_SV_TAIL(r->float_utf8),
8787 (IV)r->float_min_offset, (UV)r->float_max_offset);
8789 if (r->check_substr || r->check_utf8)
8790 PerlIO_printf(Perl_debug_log,
8792 (r->check_substr == r->float_substr
8793 && r->check_utf8 == r->float_utf8
8794 ? "(checking floating" : "(checking anchored"));
8795 if (r->extflags & RXf_NOSCAN)
8796 PerlIO_printf(Perl_debug_log, " noscan");
8797 if (r->extflags & RXf_CHECK_ALL)
8798 PerlIO_printf(Perl_debug_log, " isall");
8799 if (r->check_substr || r->check_utf8)
8800 PerlIO_printf(Perl_debug_log, ") ");
8802 if (ri->regstclass) {
8803 regprop(r, sv, ri->regstclass);
8804 PerlIO_printf(Perl_debug_log, "stclass %s ", SvPVX_const(sv));
8806 if (r->extflags & RXf_ANCH) {
8807 PerlIO_printf(Perl_debug_log, "anchored");
8808 if (r->extflags & RXf_ANCH_BOL)
8809 PerlIO_printf(Perl_debug_log, "(BOL)");
8810 if (r->extflags & RXf_ANCH_MBOL)
8811 PerlIO_printf(Perl_debug_log, "(MBOL)");
8812 if (r->extflags & RXf_ANCH_SBOL)
8813 PerlIO_printf(Perl_debug_log, "(SBOL)");
8814 if (r->extflags & RXf_ANCH_GPOS)
8815 PerlIO_printf(Perl_debug_log, "(GPOS)");
8816 PerlIO_putc(Perl_debug_log, ' ');
8818 if (r->extflags & RXf_GPOS_SEEN)
8819 PerlIO_printf(Perl_debug_log, "GPOS:%"UVuf" ", (UV)r->gofs);
8820 if (r->intflags & PREGf_SKIP)
8821 PerlIO_printf(Perl_debug_log, "plus ");
8822 if (r->intflags & PREGf_IMPLICIT)
8823 PerlIO_printf(Perl_debug_log, "implicit ");
8824 PerlIO_printf(Perl_debug_log, "minlen %"IVdf" ", (IV)r->minlen);
8825 if (r->extflags & RXf_EVAL_SEEN)
8826 PerlIO_printf(Perl_debug_log, "with eval ");
8827 PerlIO_printf(Perl_debug_log, "\n");
8828 DEBUG_FLAGS_r(regdump_extflags("r->extflags: ",r->extflags));
8830 PERL_UNUSED_CONTEXT;
8832 #endif /* DEBUGGING */
8836 - regprop - printable representation of opcode
8839 Perl_regprop(pTHX_ const regexp *prog, SV *sv, const regnode *o)
8844 RXi_GET_DECL(prog,progi);
8845 GET_RE_DEBUG_FLAGS_DECL;
8848 sv_setpvn(sv, "", 0);
8850 if (OP(o) > REGNODE_MAX) /* regnode.type is unsigned */
8851 /* It would be nice to FAIL() here, but this may be called from
8852 regexec.c, and it would be hard to supply pRExC_state. */
8853 Perl_croak(aTHX_ "Corrupted regexp opcode %d > %d", (int)OP(o), (int)REGNODE_MAX);
8854 sv_catpv(sv, PL_reg_name[OP(o)]); /* Take off const! */
8856 k = PL_regkind[OP(o)];
8860 /* Using is_utf8_string() (via PERL_PV_UNI_DETECT)
8861 * is a crude hack but it may be the best for now since
8862 * we have no flag "this EXACTish node was UTF-8"
8864 pv_pretty(sv, STRING(o), STR_LEN(o), 60, PL_colors[0], PL_colors[1],
8865 PERL_PV_ESCAPE_UNI_DETECT |
8866 PERL_PV_PRETTY_ELLIPSES |
8867 PERL_PV_PRETTY_LTGT |
8868 PERL_PV_PRETTY_NOCLEAR
8870 } else if (k == TRIE) {
8871 /* print the details of the trie in dumpuntil instead, as
8872 * progi->data isn't available here */
8873 const char op = OP(o);
8874 const U32 n = ARG(o);
8875 const reg_ac_data * const ac = IS_TRIE_AC(op) ?
8876 (reg_ac_data *)progi->data->data[n] :
8878 const reg_trie_data * const trie
8879 = (reg_trie_data*)progi->data->data[!IS_TRIE_AC(op) ? n : ac->trie];
8881 Perl_sv_catpvf(aTHX_ sv, "-%s",PL_reg_name[o->flags]);
8882 DEBUG_TRIE_COMPILE_r(
8883 Perl_sv_catpvf(aTHX_ sv,
8884 "<S:%"UVuf"/%"IVdf" W:%"UVuf" L:%"UVuf"/%"UVuf" C:%"UVuf"/%"UVuf">",
8885 (UV)trie->startstate,
8886 (IV)trie->statecount-1, /* -1 because of the unused 0 element */
8887 (UV)trie->wordcount,
8890 (UV)TRIE_CHARCOUNT(trie),
8891 (UV)trie->uniquecharcount
8894 if ( IS_ANYOF_TRIE(op) || trie->bitmap ) {
8896 int rangestart = -1;
8897 U8* bitmap = IS_ANYOF_TRIE(op) ? (U8*)ANYOF_BITMAP(o) : (U8*)TRIE_BITMAP(trie);
8899 for (i = 0; i <= 256; i++) {
8900 if (i < 256 && BITMAP_TEST(bitmap,i)) {
8901 if (rangestart == -1)
8903 } else if (rangestart != -1) {
8904 if (i <= rangestart + 3)
8905 for (; rangestart < i; rangestart++)
8906 put_byte(sv, rangestart);
8908 put_byte(sv, rangestart);
8910 put_byte(sv, i - 1);
8918 } else if (k == CURLY) {
8919 if (OP(o) == CURLYM || OP(o) == CURLYN || OP(o) == CURLYX)
8920 Perl_sv_catpvf(aTHX_ sv, "[%d]", o->flags); /* Parenth number */
8921 Perl_sv_catpvf(aTHX_ sv, " {%d,%d}", ARG1(o), ARG2(o));
8923 else if (k == WHILEM && o->flags) /* Ordinal/of */
8924 Perl_sv_catpvf(aTHX_ sv, "[%d/%d]", o->flags & 0xf, o->flags>>4);
8925 else if (k == REF || k == OPEN || k == CLOSE || k == GROUPP || OP(o)==ACCEPT) {
8926 Perl_sv_catpvf(aTHX_ sv, "%d", (int)ARG(o)); /* Parenth number */
8927 if ( RXp_PAREN_NAMES(prog) ) {
8928 if ( k != REF || OP(o) < NREF) {
8929 AV *list= (AV *)progi->data->data[progi->name_list_idx];
8930 SV **name= av_fetch(list, ARG(o), 0 );
8932 Perl_sv_catpvf(aTHX_ sv, " '%"SVf"'", SVfARG(*name));
8935 AV *list= (AV *)progi->data->data[ progi->name_list_idx ];
8936 SV *sv_dat=(SV*)progi->data->data[ ARG( o ) ];
8937 I32 *nums=(I32*)SvPVX(sv_dat);
8938 SV **name= av_fetch(list, nums[0], 0 );
8941 for ( n=0; n<SvIVX(sv_dat); n++ ) {
8942 Perl_sv_catpvf(aTHX_ sv, "%s%"IVdf,
8943 (n ? "," : ""), (IV)nums[n]);
8945 Perl_sv_catpvf(aTHX_ sv, " '%"SVf"'", SVfARG(*name));
8949 } else if (k == GOSUB)
8950 Perl_sv_catpvf(aTHX_ sv, "%d[%+d]", (int)ARG(o),(int)ARG2L(o)); /* Paren and offset */
8951 else if (k == VERB) {
8953 Perl_sv_catpvf(aTHX_ sv, ":%"SVf,
8954 SVfARG((SV*)progi->data->data[ ARG( o ) ]));
8955 } else if (k == LOGICAL)
8956 Perl_sv_catpvf(aTHX_ sv, "[%d]", o->flags); /* 2: embedded, otherwise 1 */
8957 else if (k == FOLDCHAR)
8958 Perl_sv_catpvf(aTHX_ sv, "[0x%"UVXf"]", PTR2UV(ARG(o)) );
8959 else if (k == ANYOF) {
8960 int i, rangestart = -1;
8961 const U8 flags = ANYOF_FLAGS(o);
8963 /* Should be synchronized with * ANYOF_ #xdefines in regcomp.h */
8964 static const char * const anyofs[] = {
8997 if (flags & ANYOF_LOCALE)
8998 sv_catpvs(sv, "{loc}");
8999 if (flags & ANYOF_FOLD)
9000 sv_catpvs(sv, "{i}");
9001 Perl_sv_catpvf(aTHX_ sv, "[%s", PL_colors[0]);
9002 if (flags & ANYOF_INVERT)
9004 for (i = 0; i <= 256; i++) {
9005 if (i < 256 && ANYOF_BITMAP_TEST(o,i)) {
9006 if (rangestart == -1)
9008 } else if (rangestart != -1) {
9009 if (i <= rangestart + 3)
9010 for (; rangestart < i; rangestart++)
9011 put_byte(sv, rangestart);
9013 put_byte(sv, rangestart);
9015 put_byte(sv, i - 1);
9021 if (o->flags & ANYOF_CLASS)
9022 for (i = 0; i < (int)(sizeof(anyofs)/sizeof(char*)); i++)
9023 if (ANYOF_CLASS_TEST(o,i))
9024 sv_catpv(sv, anyofs[i]);
9026 if (flags & ANYOF_UNICODE)
9027 sv_catpvs(sv, "{unicode}");
9028 else if (flags & ANYOF_UNICODE_ALL)
9029 sv_catpvs(sv, "{unicode_all}");
9033 SV * const sw = regclass_swash(prog, o, FALSE, &lv, 0);
9037 U8 s[UTF8_MAXBYTES_CASE+1];
9039 for (i = 0; i <= 256; i++) { /* just the first 256 */
9040 uvchr_to_utf8(s, i);
9042 if (i < 256 && swash_fetch(sw, s, TRUE)) {
9043 if (rangestart == -1)
9045 } else if (rangestart != -1) {
9046 if (i <= rangestart + 3)
9047 for (; rangestart < i; rangestart++) {
9048 const U8 * const e = uvchr_to_utf8(s,rangestart);
9050 for(p = s; p < e; p++)
9054 const U8 *e = uvchr_to_utf8(s,rangestart);
9056 for (p = s; p < e; p++)
9059 e = uvchr_to_utf8(s, i-1);
9060 for (p = s; p < e; p++)
9067 sv_catpvs(sv, "..."); /* et cetera */
9071 char *s = savesvpv(lv);
9072 char * const origs = s;
9074 while (*s && *s != '\n')
9078 const char * const t = ++s;
9096 Perl_sv_catpvf(aTHX_ sv, "%s]", PL_colors[1]);
9098 else if (k == BRANCHJ && (OP(o) == UNLESSM || OP(o) == IFMATCH))
9099 Perl_sv_catpvf(aTHX_ sv, "[%d]", -(o->flags));
9101 PERL_UNUSED_CONTEXT;
9102 PERL_UNUSED_ARG(sv);
9104 PERL_UNUSED_ARG(prog);
9105 #endif /* DEBUGGING */
9109 Perl_re_intuit_string(pTHX_ REGEXP * const r)
9110 { /* Assume that RE_INTUIT is set */
9112 struct regexp *const prog = (struct regexp *)SvANY(r);
9113 GET_RE_DEBUG_FLAGS_DECL;
9114 PERL_UNUSED_CONTEXT;
9118 const char * const s = SvPV_nolen_const(prog->check_substr
9119 ? prog->check_substr : prog->check_utf8);
9121 if (!PL_colorset) reginitcolors();
9122 PerlIO_printf(Perl_debug_log,
9123 "%sUsing REx %ssubstr:%s \"%s%.60s%s%s\"\n",
9125 prog->check_substr ? "" : "utf8 ",
9126 PL_colors[5],PL_colors[0],
9129 (strlen(s) > 60 ? "..." : ""));
9132 return prog->check_substr ? prog->check_substr : prog->check_utf8;
9138 handles refcounting and freeing the perl core regexp structure. When
9139 it is necessary to actually free the structure the first thing it
9140 does is call the 'free' method of the regexp_engine associated to to
9141 the regexp, allowing the handling of the void *pprivate; member
9142 first. (This routine is not overridable by extensions, which is why
9143 the extensions free is called first.)
9145 See regdupe and regdupe_internal if you change anything here.
9147 #ifndef PERL_IN_XSUB_RE
9149 Perl_pregfree(pTHX_ REGEXP *r)
9155 Perl_pregfree2(pTHX_ REGEXP *rx)
9158 struct regexp *const r = (struct regexp *)SvANY(rx);
9159 GET_RE_DEBUG_FLAGS_DECL;
9162 ReREFCNT_dec(r->mother_re);
9164 CALLREGFREE_PVT(rx); /* free the private data */
9165 if (RXp_PAREN_NAMES(r))
9166 SvREFCNT_dec(RXp_PAREN_NAMES(r));
9169 if (r->anchored_substr)
9170 SvREFCNT_dec(r->anchored_substr);
9171 if (r->anchored_utf8)
9172 SvREFCNT_dec(r->anchored_utf8);
9173 if (r->float_substr)
9174 SvREFCNT_dec(r->float_substr);
9176 SvREFCNT_dec(r->float_utf8);
9177 Safefree(r->substrs);
9179 RX_MATCH_COPY_FREE(rx);
9180 #ifdef PERL_OLD_COPY_ON_WRITE
9182 SvREFCNT_dec(r->saved_copy);
9190 This is a hacky workaround to the structural issue of match results
9191 being stored in the regexp structure which is in turn stored in
9192 PL_curpm/PL_reg_curpm. The problem is that due to qr// the pattern
9193 could be PL_curpm in multiple contexts, and could require multiple
9194 result sets being associated with the pattern simultaneously, such
9195 as when doing a recursive match with (??{$qr})
9197 The solution is to make a lightweight copy of the regexp structure
9198 when a qr// is returned from the code executed by (??{$qr}) this
9199 lightweight copy doesnt actually own any of its data except for
9200 the starp/end and the actual regexp structure itself.
9206 Perl_reg_temp_copy (pTHX_ REGEXP *rx) {
9207 REGEXP *ret_x = (REGEXP*) newSV_type(SVt_REGEXP);
9208 struct regexp *ret = (struct regexp *)SvANY(ret_x);
9209 struct regexp *const r = (struct regexp *)SvANY(rx);
9210 register const I32 npar = r->nparens+1;
9211 (void)ReREFCNT_inc(rx);
9212 /* We can take advantage of the existing "copied buffer" mechanism in SVs
9213 by pointing directly at the buffer, but flagging that the allocated
9214 space in the copy is zero. As we've just done a struct copy, it's now
9215 a case of zero-ing that, rather than copying the current length. */
9216 SvPV_set(ret_x, RX_WRAPPED(rx));
9217 SvFLAGS(ret_x) |= SvFLAGS(rx) & (SVf_POK|SVp_POK|SVf_UTF8);
9218 StructCopy(&(r->xpv_cur), &(ret->xpv_cur), struct regexp_allocated);
9219 SvLEN_set(ret_x, 0);
9220 Newx(ret->offs, npar, regexp_paren_pair);
9221 Copy(r->offs, ret->offs, npar, regexp_paren_pair);
9223 Newx(ret->substrs, 1, struct reg_substr_data);
9224 StructCopy(r->substrs, ret->substrs, struct reg_substr_data);
9226 SvREFCNT_inc_void(ret->anchored_substr);
9227 SvREFCNT_inc_void(ret->anchored_utf8);
9228 SvREFCNT_inc_void(ret->float_substr);
9229 SvREFCNT_inc_void(ret->float_utf8);
9231 /* check_substr and check_utf8, if non-NULL, point to either their
9232 anchored or float namesakes, and don't hold a second reference. */
9234 RX_MATCH_COPIED_off(ret_x);
9235 #ifdef PERL_OLD_COPY_ON_WRITE
9236 ret->saved_copy = NULL;
9238 ret->mother_re = rx;
9245 /* regfree_internal()
9247 Free the private data in a regexp. This is overloadable by
9248 extensions. Perl takes care of the regexp structure in pregfree(),
9249 this covers the *pprivate pointer which technically perldoesnt
9250 know about, however of course we have to handle the
9251 regexp_internal structure when no extension is in use.
9253 Note this is called before freeing anything in the regexp
9258 Perl_regfree_internal(pTHX_ REGEXP * const rx)
9261 struct regexp *const r = (struct regexp *)SvANY(rx);
9263 GET_RE_DEBUG_FLAGS_DECL;
9269 SV *dsv= sv_newmortal();
9270 RE_PV_QUOTED_DECL(s, RX_UTF8(rx),
9271 dsv, RX_PRECOMP(rx), RX_PRELEN(rx), 60);
9272 PerlIO_printf(Perl_debug_log,"%sFreeing REx:%s %s\n",
9273 PL_colors[4],PL_colors[5],s);
9276 #ifdef RE_TRACK_PATTERN_OFFSETS
9278 Safefree(ri->u.offsets); /* 20010421 MJD */
9281 int n = ri->data->count;
9282 PAD* new_comppad = NULL;
9287 /* If you add a ->what type here, update the comment in regcomp.h */
9288 switch (ri->data->what[n]) {
9292 SvREFCNT_dec((SV*)ri->data->data[n]);
9295 Safefree(ri->data->data[n]);
9298 new_comppad = (AV*)ri->data->data[n];
9301 if (new_comppad == NULL)
9302 Perl_croak(aTHX_ "panic: pregfree comppad");
9303 PAD_SAVE_LOCAL(old_comppad,
9304 /* Watch out for global destruction's random ordering. */
9305 (SvTYPE(new_comppad) == SVt_PVAV) ? new_comppad : NULL
9308 refcnt = OpREFCNT_dec((OP_4tree*)ri->data->data[n]);
9311 op_free((OP_4tree*)ri->data->data[n]);
9313 PAD_RESTORE_LOCAL(old_comppad);
9314 SvREFCNT_dec((SV*)new_comppad);
9320 { /* Aho Corasick add-on structure for a trie node.
9321 Used in stclass optimization only */
9323 reg_ac_data *aho=(reg_ac_data*)ri->data->data[n];
9325 refcount = --aho->refcount;
9328 PerlMemShared_free(aho->states);
9329 PerlMemShared_free(aho->fail);
9330 /* do this last!!!! */
9331 PerlMemShared_free(ri->data->data[n]);
9332 PerlMemShared_free(ri->regstclass);
9338 /* trie structure. */
9340 reg_trie_data *trie=(reg_trie_data*)ri->data->data[n];
9342 refcount = --trie->refcount;
9345 PerlMemShared_free(trie->charmap);
9346 PerlMemShared_free(trie->states);
9347 PerlMemShared_free(trie->trans);
9349 PerlMemShared_free(trie->bitmap);
9351 PerlMemShared_free(trie->wordlen);
9353 PerlMemShared_free(trie->jump);
9355 PerlMemShared_free(trie->nextword);
9356 /* do this last!!!! */
9357 PerlMemShared_free(ri->data->data[n]);
9362 Perl_croak(aTHX_ "panic: regfree data code '%c'", ri->data->what[n]);
9365 Safefree(ri->data->what);
9372 #define sv_dup_inc(s,t) SvREFCNT_inc(sv_dup(s,t))
9373 #define av_dup_inc(s,t) (AV*)SvREFCNT_inc(sv_dup((SV*)s,t))
9374 #define hv_dup_inc(s,t) (HV*)SvREFCNT_inc(sv_dup((SV*)s,t))
9375 #define SAVEPVN(p,n) ((p) ? savepvn(p,n) : NULL)
9378 re_dup - duplicate a regexp.
9380 This routine is expected to clone a given regexp structure. It is not
9381 compiler under USE_ITHREADS.
9383 After all of the core data stored in struct regexp is duplicated
9384 the regexp_engine.dupe method is used to copy any private data
9385 stored in the *pprivate pointer. This allows extensions to handle
9386 any duplication it needs to do.
9388 See pregfree() and regfree_internal() if you change anything here.
9390 #if defined(USE_ITHREADS)
9391 #ifndef PERL_IN_XSUB_RE
9393 Perl_re_dup_guts(pTHX_ const REGEXP *sstr, REGEXP *dstr, CLONE_PARAMS *param)
9397 const struct regexp *r = (const struct regexp *)SvANY(sstr);
9398 struct regexp *ret = (struct regexp *)SvANY(dstr);
9400 npar = r->nparens+1;
9401 Newx(ret->offs, npar, regexp_paren_pair);
9402 Copy(r->offs, ret->offs, npar, regexp_paren_pair);
9404 /* no need to copy these */
9405 Newx(ret->swap, npar, regexp_paren_pair);
9409 /* Do it this way to avoid reading from *r after the StructCopy().
9410 That way, if any of the sv_dup_inc()s dislodge *r from the L1
9411 cache, it doesn't matter. */
9412 const bool anchored = r->check_substr
9413 ? r->check_substr == r->anchored_substr
9414 : r->check_utf8 == r->anchored_utf8;
9415 Newx(ret->substrs, 1, struct reg_substr_data);
9416 StructCopy(r->substrs, ret->substrs, struct reg_substr_data);
9418 ret->anchored_substr = sv_dup_inc(ret->anchored_substr, param);
9419 ret->anchored_utf8 = sv_dup_inc(ret->anchored_utf8, param);
9420 ret->float_substr = sv_dup_inc(ret->float_substr, param);
9421 ret->float_utf8 = sv_dup_inc(ret->float_utf8, param);
9423 /* check_substr and check_utf8, if non-NULL, point to either their
9424 anchored or float namesakes, and don't hold a second reference. */
9426 if (ret->check_substr) {
9428 assert(r->check_utf8 == r->anchored_utf8);
9429 ret->check_substr = ret->anchored_substr;
9430 ret->check_utf8 = ret->anchored_utf8;
9432 assert(r->check_substr == r->float_substr);
9433 assert(r->check_utf8 == r->float_utf8);
9434 ret->check_substr = ret->float_substr;
9435 ret->check_utf8 = ret->float_utf8;
9437 } else if (ret->check_utf8) {
9439 ret->check_utf8 = ret->anchored_utf8;
9441 ret->check_utf8 = ret->float_utf8;
9446 RXp_PAREN_NAMES(ret) = hv_dup_inc(RXp_PAREN_NAMES(ret), param);
9449 RXi_SET(ret,CALLREGDUPE_PVT(dstr,param));
9451 if (RX_MATCH_COPIED(dstr))
9452 ret->subbeg = SAVEPVN(ret->subbeg, ret->sublen);
9455 #ifdef PERL_OLD_COPY_ON_WRITE
9456 ret->saved_copy = NULL;
9459 ret->mother_re = NULL;
9461 ret->seen_evals = 0;
9463 #endif /* PERL_IN_XSUB_RE */
9468 This is the internal complement to regdupe() which is used to copy
9469 the structure pointed to by the *pprivate pointer in the regexp.
9470 This is the core version of the extension overridable cloning hook.
9471 The regexp structure being duplicated will be copied by perl prior
9472 to this and will be provided as the regexp *r argument, however
9473 with the /old/ structures pprivate pointer value. Thus this routine
9474 may override any copying normally done by perl.
9476 It returns a pointer to the new regexp_internal structure.
9480 Perl_regdupe_internal(pTHX_ REGEXP * const rx, CLONE_PARAMS *param)
9483 struct regexp *const r = (struct regexp *)SvANY(rx);
9484 regexp_internal *reti;
9488 npar = r->nparens+1;
9491 Newxc(reti, sizeof(regexp_internal) + (len+1)*sizeof(regnode), char, regexp_internal);
9492 Copy(ri->program, reti->program, len+1, regnode);
9495 reti->regstclass = NULL;
9499 const int count = ri->data->count;
9502 Newxc(d, sizeof(struct reg_data) + count*sizeof(void *),
9503 char, struct reg_data);
9504 Newx(d->what, count, U8);
9507 for (i = 0; i < count; i++) {
9508 d->what[i] = ri->data->what[i];
9509 switch (d->what[i]) {
9510 /* legal options are one of: sSfpontTu
9511 see also regcomp.h and pregfree() */
9514 case 'p': /* actually an AV, but the dup function is identical. */
9515 case 'u': /* actually an HV, but the dup function is identical. */
9516 d->data[i] = sv_dup_inc((SV *)ri->data->data[i], param);
9519 /* This is cheating. */
9520 Newx(d->data[i], 1, struct regnode_charclass_class);
9521 StructCopy(ri->data->data[i], d->data[i],
9522 struct regnode_charclass_class);
9523 reti->regstclass = (regnode*)d->data[i];
9526 /* Compiled op trees are readonly and in shared memory,
9527 and can thus be shared without duplication. */
9529 d->data[i] = (void*)OpREFCNT_inc((OP*)ri->data->data[i]);
9533 /* Trie stclasses are readonly and can thus be shared
9534 * without duplication. We free the stclass in pregfree
9535 * when the corresponding reg_ac_data struct is freed.
9537 reti->regstclass= ri->regstclass;
9541 ((reg_trie_data*)ri->data->data[i])->refcount++;
9545 d->data[i] = ri->data->data[i];
9548 Perl_croak(aTHX_ "panic: re_dup unknown data code '%c'", ri->data->what[i]);
9557 reti->name_list_idx = ri->name_list_idx;
9559 #ifdef RE_TRACK_PATTERN_OFFSETS
9560 if (ri->u.offsets) {
9561 Newx(reti->u.offsets, 2*len+1, U32);
9562 Copy(ri->u.offsets, reti->u.offsets, 2*len+1, U32);
9565 SetProgLen(reti,len);
9571 #endif /* USE_ITHREADS */
9576 converts a regexp embedded in a MAGIC struct to its stringified form,
9577 caching the converted form in the struct and returns the cached
9580 If lp is nonnull then it is used to return the length of the
9583 If flags is nonnull and the returned string contains UTF8 then
9584 (*flags & 1) will be true.
9586 If haseval is nonnull then it is used to return whether the pattern
9589 Normally called via macro:
9591 CALLREG_STRINGIFY(mg,&len,&utf8);
9595 CALLREG_AS_STR(mg,&lp,&flags,&haseval)
9597 See sv_2pv_flags() in sv.c for an example of internal usage.
9600 #ifndef PERL_IN_XSUB_RE
9603 Perl_reg_stringify(pTHX_ MAGIC *mg, STRLEN *lp, U32 *flags, I32 *haseval ) {
9605 const REGEXP * const re = (REGEXP *)mg->mg_obj;
9607 *haseval = RX_SEEN_EVALS(re);
9609 *flags = RX_UTF8(re) ? 1 : 0;
9611 *lp = RX_WRAPLEN(re);
9612 return RX_WRAPPED(re);
9616 - regnext - dig the "next" pointer out of a node
9619 Perl_regnext(pTHX_ register regnode *p)
9622 register I32 offset;
9627 offset = (reg_off_by_arg[OP(p)] ? ARG(p) : NEXT_OFF(p));
9636 S_re_croak2(pTHX_ const char* pat1,const char* pat2,...)
9639 STRLEN l1 = strlen(pat1);
9640 STRLEN l2 = strlen(pat2);
9643 const char *message;
9649 Copy(pat1, buf, l1 , char);
9650 Copy(pat2, buf + l1, l2 , char);
9651 buf[l1 + l2] = '\n';
9652 buf[l1 + l2 + 1] = '\0';
9654 /* ANSI variant takes additional second argument */
9655 va_start(args, pat2);
9659 msv = vmess(buf, &args);
9661 message = SvPV_const(msv,l1);
9664 Copy(message, buf, l1 , char);
9665 buf[l1-1] = '\0'; /* Overwrite \n */
9666 Perl_croak(aTHX_ "%s", buf);
9669 /* XXX Here's a total kludge. But we need to re-enter for swash routines. */
9671 #ifndef PERL_IN_XSUB_RE
9673 Perl_save_re_context(pTHX)
9677 struct re_save_state *state;
9679 SAVEVPTR(PL_curcop);
9680 SSGROW(SAVESTACK_ALLOC_FOR_RE_SAVE_STATE + 1);
9682 state = (struct re_save_state *)(PL_savestack + PL_savestack_ix);
9683 PL_savestack_ix += SAVESTACK_ALLOC_FOR_RE_SAVE_STATE;
9684 SSPUSHINT(SAVEt_RE_STATE);
9686 Copy(&PL_reg_state, state, 1, struct re_save_state);
9688 PL_reg_start_tmp = 0;
9689 PL_reg_start_tmpl = 0;
9690 PL_reg_oldsaved = NULL;
9691 PL_reg_oldsavedlen = 0;
9693 PL_reg_leftiter = 0;
9694 PL_reg_poscache = NULL;
9695 PL_reg_poscache_size = 0;
9696 #ifdef PERL_OLD_COPY_ON_WRITE
9700 /* Save $1..$n (#18107: UTF-8 s/(\w+)/uc($1)/e); AMS 20021106. */
9702 const REGEXP * const rx = PM_GETRE(PL_curpm);
9705 for (i = 1; i <= RX_NPARENS(rx); i++) {
9706 char digits[TYPE_CHARS(long)];
9707 const STRLEN len = my_snprintf(digits, sizeof(digits), "%lu", (long)i);
9708 GV *const *const gvp
9709 = (GV**)hv_fetch(PL_defstash, digits, len, 0);
9712 GV * const gv = *gvp;
9713 if (SvTYPE(gv) == SVt_PVGV && GvSV(gv))
9723 clear_re(pTHX_ void *r)
9726 ReREFCNT_dec((REGEXP *)r);
9732 S_put_byte(pTHX_ SV *sv, int c)
9734 /* Our definition of isPRINT() ignores locales, so only bytes that are
9735 not part of UTF-8 are considered printable. I assume that the same
9736 holds for UTF-EBCDIC.
9737 Also, code point 255 is not printable in either (it's E0 in EBCDIC,
9738 which Wikipedia says:
9740 EO, or Eight Ones, is an 8-bit EBCDIC character code represented as all
9741 ones (binary 1111 1111, hexadecimal FF). It is similar, but not
9742 identical, to the ASCII delete (DEL) or rubout control character.
9743 ) So the old condition can be simplified to !isPRINT(c) */
9745 Perl_sv_catpvf(aTHX_ sv, "\\%o", c);
9747 const char string = c;
9748 if (c == '-' || c == ']' || c == '\\' || c == '^')
9749 sv_catpvs(sv, "\\");
9750 sv_catpvn(sv, &string, 1);
9755 #define CLEAR_OPTSTART \
9756 if (optstart) STMT_START { \
9757 DEBUG_OPTIMISE_r(PerlIO_printf(Perl_debug_log, " (%"IVdf" nodes)\n", (IV)(node - optstart))); \
9761 #define DUMPUNTIL(b,e) CLEAR_OPTSTART; node=dumpuntil(r,start,(b),(e),last,sv,indent+1,depth+1);
9763 STATIC const regnode *
9764 S_dumpuntil(pTHX_ const regexp *r, const regnode *start, const regnode *node,
9765 const regnode *last, const regnode *plast,
9766 SV* sv, I32 indent, U32 depth)
9769 register U8 op = PSEUDO; /* Arbitrary non-END op. */
9770 register const regnode *next;
9771 const regnode *optstart= NULL;
9774 GET_RE_DEBUG_FLAGS_DECL;
9776 #ifdef DEBUG_DUMPUNTIL
9777 PerlIO_printf(Perl_debug_log, "--- %d : %d - %d - %d\n",indent,node-start,
9778 last ? last-start : 0,plast ? plast-start : 0);
9781 if (plast && plast < last)
9784 while (PL_regkind[op] != END && (!last || node < last)) {
9785 /* While that wasn't END last time... */
9788 if (op == CLOSE || op == WHILEM)
9790 next = regnext((regnode *)node);
9793 if (OP(node) == OPTIMIZED) {
9794 if (!optstart && RE_DEBUG_FLAG(RE_DEBUG_COMPILE_OPTIMISE))
9801 regprop(r, sv, node);
9802 PerlIO_printf(Perl_debug_log, "%4"IVdf":%*s%s", (IV)(node - start),
9803 (int)(2*indent + 1), "", SvPVX_const(sv));
9805 if (OP(node) != OPTIMIZED) {
9806 if (next == NULL) /* Next ptr. */
9807 PerlIO_printf(Perl_debug_log, " (0)");
9808 else if (PL_regkind[(U8)op] == BRANCH && PL_regkind[OP(next)] != BRANCH )
9809 PerlIO_printf(Perl_debug_log, " (FAIL)");
9811 PerlIO_printf(Perl_debug_log, " (%"IVdf")", (IV)(next - start));
9812 (void)PerlIO_putc(Perl_debug_log, '\n');
9816 if (PL_regkind[(U8)op] == BRANCHJ) {
9819 register const regnode *nnode = (OP(next) == LONGJMP
9820 ? regnext((regnode *)next)
9822 if (last && nnode > last)
9824 DUMPUNTIL(NEXTOPER(NEXTOPER(node)), nnode);
9827 else if (PL_regkind[(U8)op] == BRANCH) {
9829 DUMPUNTIL(NEXTOPER(node), next);
9831 else if ( PL_regkind[(U8)op] == TRIE ) {
9832 const regnode *this_trie = node;
9833 const char op = OP(node);
9834 const U32 n = ARG(node);
9835 const reg_ac_data * const ac = op>=AHOCORASICK ?
9836 (reg_ac_data *)ri->data->data[n] :
9838 const reg_trie_data * const trie =
9839 (reg_trie_data*)ri->data->data[op<AHOCORASICK ? n : ac->trie];
9841 AV *const trie_words = (AV *) ri->data->data[n + TRIE_WORDS_OFFSET];
9843 const regnode *nextbranch= NULL;
9845 sv_setpvn(sv, "", 0);
9846 for (word_idx= 0; word_idx < (I32)trie->wordcount; word_idx++) {
9847 SV ** const elem_ptr = av_fetch(trie_words,word_idx,0);
9849 PerlIO_printf(Perl_debug_log, "%*s%s ",
9850 (int)(2*(indent+3)), "",
9851 elem_ptr ? pv_pretty(sv, SvPV_nolen_const(*elem_ptr), SvCUR(*elem_ptr), 60,
9852 PL_colors[0], PL_colors[1],
9853 (SvUTF8(*elem_ptr) ? PERL_PV_ESCAPE_UNI : 0) |
9854 PERL_PV_PRETTY_ELLIPSES |
9860 U16 dist= trie->jump[word_idx+1];
9861 PerlIO_printf(Perl_debug_log, "(%"UVuf")\n",
9862 (UV)((dist ? this_trie + dist : next) - start));
9865 nextbranch= this_trie + trie->jump[0];
9866 DUMPUNTIL(this_trie + dist, nextbranch);
9868 if (nextbranch && PL_regkind[OP(nextbranch)]==BRANCH)
9869 nextbranch= regnext((regnode *)nextbranch);
9871 PerlIO_printf(Perl_debug_log, "\n");
9874 if (last && next > last)
9879 else if ( op == CURLY ) { /* "next" might be very big: optimizer */
9880 DUMPUNTIL(NEXTOPER(node) + EXTRA_STEP_2ARGS,
9881 NEXTOPER(node) + EXTRA_STEP_2ARGS + 1);
9883 else if (PL_regkind[(U8)op] == CURLY && op != CURLYX) {
9885 DUMPUNTIL(NEXTOPER(node) + EXTRA_STEP_2ARGS, next);
9887 else if ( op == PLUS || op == STAR) {
9888 DUMPUNTIL(NEXTOPER(node), NEXTOPER(node) + 1);
9890 else if (op == ANYOF) {
9891 /* arglen 1 + class block */
9892 node += 1 + ((ANYOF_FLAGS(node) & ANYOF_LARGE)
9893 ? ANYOF_CLASS_SKIP : ANYOF_SKIP);
9894 node = NEXTOPER(node);
9896 else if (PL_regkind[(U8)op] == EXACT) {
9897 /* Literal string, where present. */
9898 node += NODE_SZ_STR(node) - 1;
9899 node = NEXTOPER(node);
9902 node = NEXTOPER(node);
9903 node += regarglen[(U8)op];
9905 if (op == CURLYX || op == OPEN)
9909 #ifdef DEBUG_DUMPUNTIL
9910 PerlIO_printf(Perl_debug_log, "--- %d\n", (int)indent);
9915 #endif /* DEBUGGING */
9919 * c-indentation-style: bsd
9921 * indent-tabs-mode: t
9924 * ex: set ts=8 sts=4 sw=4 noet: