3 perluniintro - Perl Unicode introduction
7 This document gives a general idea of Unicode and how to use Unicode
12 Unicode is a character set standard which plans to codify all of the
13 writing systems of the world, plus many other symbols.
15 Unicode and ISO/IEC 10646 are coordinated standards that provide code
16 points for characters in almost all modern character set standards,
17 covering more than 30 writing systems and hundreds of languages,
18 including all commercially-important modern languages. All characters
19 in the largest Chinese, Japanese, and Korean dictionaries are also
20 encoded. The standards will eventually cover almost all characters in
21 more than 250 writing systems and thousands of languages.
23 A Unicode I<character> is an abstract entity. It is not bound to any
24 particular integer width, especially not to the C language C<char>.
25 Unicode is language-neutral and display-neutral: it does not encode the
26 language of the text and it does not define fonts or other graphical
27 layout details. Unicode operates on characters and on text built from
30 Unicode defines characters like C<LATIN CAPITAL LETTER A> or C<GREEK
31 SMALL LETTER ALPHA> and unique numbers for the characters, in this
32 case 0x0041 and 0x03B1, respectively. These unique numbers are called
35 The Unicode standard prefers using hexadecimal notation for the code
36 points. If numbers like C<0x0041> are unfamiliar to
37 you, take a peek at a later section, L</"Hexadecimal Notation">.
38 The Unicode standard uses the notation C<U+0041 LATIN CAPITAL LETTER A>,
39 to give the hexadecimal code point and the normative name of
42 Unicode also defines various I<properties> for the characters, like
43 "uppercase" or "lowercase", "decimal digit", or "punctuation";
44 these properties are independent of the names of the characters.
45 Furthermore, various operations on the characters like uppercasing,
46 lowercasing, and collating (sorting) are defined.
48 A Unicode character consists either of a single code point, or a
49 I<base character> (like C<LATIN CAPITAL LETTER A>), followed by one or
50 more I<modifiers> (like C<COMBINING ACUTE ACCENT>). This sequence of
51 base character and modifiers is called a I<combining character
54 Whether to call these combining character sequences "characters"
55 depends on your point of view. If you are a programmer, you probably
56 would tend towards seeing each element in the sequences as one unit,
57 or "character". The whole sequence could be seen as one "character",
58 however, from the user's point of view, since that's probably what it
59 looks like in the context of the user's language.
61 With this "whole sequence" view of characters, the total number of
62 characters is open-ended. But in the programmer's "one unit is one
63 character" point of view, the concept of "characters" is more
64 deterministic. In this document, we take that second point of view:
65 one "character" is one Unicode code point, be it a base character or
66 a combining character.
68 For some combinations, there are I<precomposed> characters.
69 C<LATIN CAPITAL LETTER A WITH ACUTE>, for example, is defined as
70 a single code point. These precomposed characters are, however,
71 only available for some combinations, and are mainly
72 meant to support round-trip conversions between Unicode and legacy
73 standards (like the ISO 8859). In the general case, the composing
74 method is more extensible. To support conversion between
75 different compositions of the characters, various I<normalization
76 forms> to standardize representations are also defined.
78 Because of backward compatibility with legacy encodings, the "a unique
79 number for every character" idea breaks down a bit: instead, there is
80 "at least one number for every character". The same character could
81 be represented differently in several legacy encodings. The
82 converse is also not true: some code points do not have an assigned
83 character. Firstly, there are unallocated code points within
84 otherwise used blocks. Secondly, there are special Unicode control
85 characters that do not represent true characters.
87 A common myth about Unicode is that it would be "16-bit", that is,
88 Unicode is only represented as C<0x10000> (or 65536) characters from
89 C<0x0000> to C<0xFFFF>. B<This is untrue.> Since Unicode 2.0, Unicode
90 has been defined all the way up to 21 bits (C<0x10FFFF>), and since
91 Unicode 3.1, characters have been defined beyond C<0xFFFF>. The first
92 C<0x10000> characters are called the I<Plane 0>, or the I<Basic
93 Multilingual Plane> (BMP). With Unicode 3.1, 17 planes in all are
94 defined--but nowhere near full of defined characters, yet.
96 Another myth is that the 256-character blocks have something to
97 do with languages--that each block would define the characters used
98 by a language or a set of languages. B<This is also untrue.>
99 The division into blocks exists, but it is almost completely
100 accidental--an artifact of how the characters have been and
101 still are allocated. Instead, there is a concept called I<scripts>,
102 which is more useful: there is C<Latin> script, C<Greek> script, and
103 so on. Scripts usually span varied parts of several blocks.
104 For further information see L<Unicode::UCD>.
106 The Unicode code points are just abstract numbers. To input and
107 output these abstract numbers, the numbers must be I<encoded> somehow.
108 Unicode defines several I<character encoding forms>, of which I<UTF-8>
109 is perhaps the most popular. UTF-8 is a variable length encoding that
110 encodes Unicode characters as 1 to 6 bytes (only 4 with the currently
111 defined characters). Other encodings include UTF-16 and UTF-32 and their
112 big- and little-endian variants (UTF-8 is byte-order independent)
113 The ISO/IEC 10646 defines the UCS-2 and UCS-4 encoding forms.
115 For more information about encodings--for instance, to learn what
116 I<surrogates> and I<byte order marks> (BOMs) are--see L<perlunicode>.
118 =head2 Perl's Unicode Support
120 Starting from Perl 5.6.0, Perl has had the capacity to handle Unicode
121 natively. Perl 5.8.0, however, is the first recommended release for
122 serious Unicode work. The maintenance release 5.6.1 fixed many of the
123 problems of the initial Unicode implementation, but for example
124 regular expressions still do not work with Unicode in 5.6.1.
126 B<Starting from Perl 5.8.0, the use of C<use utf8> is no longer
127 necessary.> In earlier releases the C<utf8> pragma was used to declare
128 that operations in the current block or file would be Unicode-aware.
129 This model was found to be wrong, or at least clumsy: the "Unicodeness"
130 is now carried with the data, instead of being attached to the
131 operations. Only one case remains where an explicit C<use utf8> is
132 needed: if your Perl script itself is encoded in UTF-8, you can use
133 UTF-8 in your identifier names, and in string and regular expression
134 literals, by saying C<use utf8>. This is not the default because
135 scripts with legacy 8-bit data in them would break. See L<utf8>.
137 =head2 Perl's Unicode Model
139 Perl supports both pre-5.6 strings of eight-bit native bytes, and
140 strings of Unicode characters. The principle is that Perl tries to
141 keep its data as eight-bit bytes for as long as possible, but as soon
142 as Unicodeness cannot be avoided, the data is transparently upgraded
145 Internally, Perl currently uses either whatever the native eight-bit
146 character set of the platform (for example Latin-1) is, defaulting to
147 UTF-8, to encode Unicode strings. Specifically, if all code points in
148 the string are C<0xFF> or less, Perl uses the native eight-bit
149 character set. Otherwise, it uses UTF-8.
151 A user of Perl does not normally need to know nor care how Perl
152 happens to encode its internal strings, but it becomes relevant when
153 outputting Unicode strings to a stream without a PerlIO layer -- one with
154 the "default" encoding. In such a case, the raw bytes used internally
155 (the native character set or UTF-8, as appropriate for each string)
156 will be used, and a "Wide character" warning will be issued if those
157 strings contain a character beyond 0x00FF.
161 perl -e 'print "\x{DF}\n", "\x{0100}\x{DF}\n"'
163 produces a fairly useless mixture of native bytes and UTF-8, as well
166 Wide character in print at ...
168 To output UTF-8, use the C<:utf8> output layer. Prepending
170 binmode(STDOUT, ":utf8");
172 to this sample program ensures that the output is completely UTF-8,
173 and removes the program's warning.
175 If your locale environment variables (C<LANGUAGE>, C<LC_ALL>,
176 C<LC_CTYPE>, C<LANG>) contain the strings 'UTF-8' or 'UTF8',
177 regardless of case, then the default encoding of your STDIN, STDOUT,
178 and STDERR and of B<any subsequent file open>, is UTF-8. Note that
179 this means that Perl expects other software to work, too: if Perl has
180 been led to believe that STDIN should be UTF-8, but then STDIN coming
181 in from another command is not UTF-8, Perl will complain about the
184 All features that combine Unicode and I/O also require using the new
185 PerlIO feature. Almost all Perl 5.8 platforms do use PerlIO, though:
186 you can see whether yours is by running "perl -V" and looking for
189 =head2 Unicode and EBCDIC
191 Perl 5.8.0 also supports Unicode on EBCDIC platforms. There,
192 Unicode support is somewhat more complex to implement since
193 additional conversions are needed at every step. Some problems
194 remain, see L<perlebcdic> for details.
196 In any case, the Unicode support on EBCDIC platforms is better than
197 in the 5.6 series, which didn't work much at all for EBCDIC platform.
198 On EBCDIC platforms, the internal Unicode encoding form is UTF-EBCDIC
199 instead of UTF-8. The difference is that as UTF-8 is "ASCII-safe" in
200 that ASCII characters encode to UTF-8 as-is, while UTF-EBCDIC is
203 =head2 Creating Unicode
205 To create Unicode characters in literals for code points above C<0xFF>,
206 use the C<\x{...}> notation in double-quoted strings:
208 my $smiley = "\x{263a}";
210 Similarly, it can be used in regular expression literals
212 $smiley =~ /\x{263a}/;
214 At run-time you can use C<chr()>:
216 my $hebrew_alef = chr(0x05d0);
218 See L</"Further Resources"> for how to find all these numeric codes.
220 Naturally, C<ord()> will do the reverse: it turns a character into
223 Note that C<\x..> (no C<{}> and only two hexadecimal digits), C<\x{...}>,
224 and C<chr(...)> for arguments less than C<0x100> (decimal 256)
225 generate an eight-bit character for backward compatibility with older
226 Perls. For arguments of C<0x100> or more, Unicode characters are
227 always produced. If you want to force the production of Unicode
228 characters regardless of the numeric value, use C<pack("U", ...)>
229 instead of C<\x..>, C<\x{...}>, or C<chr()>.
231 You can also use the C<charnames> pragma to invoke characters
232 by name in double-quoted strings:
234 use charnames ':full';
235 my $arabic_alef = "\N{ARABIC LETTER ALEF}";
237 And, as mentioned above, you can also C<pack()> numbers into Unicode
240 my $georgian_an = pack("U", 0x10a0);
242 Note that both C<\x{...}> and C<\N{...}> are compile-time string
243 constants: you cannot use variables in them. if you want similar
244 run-time functionality, use C<chr()> and C<charnames::vianame()>.
246 Also note that if all the code points for pack "U" are below 0x100,
247 bytes will be generated, just like if you were using C<chr()>.
249 my $bytes = pack("U*", 0x80, 0xFF);
251 If you want to force the result to Unicode characters, use the special
252 C<"U0"> prefix. It consumes no arguments but forces the result to be
253 in Unicode characters, instead of bytes.
255 my $chars = pack("U0U*", 0x80, 0xFF);
257 =head2 Handling Unicode
259 Handling Unicode is for the most part transparent: just use the
260 strings as usual. Functions like C<index()>, C<length()>, and
261 C<substr()> will work on the Unicode characters; regular expressions
262 will work on the Unicode characters (see L<perlunicode> and L<perlretut>).
264 Note that Perl considers combining character sequences to be
265 characters, so for example
267 use charnames ':full';
268 print length("\N{LATIN CAPITAL LETTER A}\N{COMBINING ACUTE ACCENT}"), "\n";
270 will print 2, not 1. The only exception is that regular expressions
271 have C<\X> for matching a combining character sequence.
273 Life is not quite so transparent, however, when working with legacy
274 encodings, I/O, and certain special cases:
276 =head2 Legacy Encodings
278 When you combine legacy data and Unicode the legacy data needs
279 to be upgraded to Unicode. Normally ISO 8859-1 (or EBCDIC, if
280 applicable) is assumed. You can override this assumption by
281 using the C<encoding> pragma, for example
283 use encoding 'latin2'; # ISO 8859-2
285 in which case literals (string or regular expressions), C<chr()>,
286 and C<ord()> in your whole script are assumed to produce Unicode
287 characters from ISO 8859-2 code points. Note that the matching for
288 encoding names is forgiving: instead of C<latin2> you could have
289 said C<Latin 2>, or C<iso8859-2>, or other variations. With just
293 the environment variable C<PERL_ENCODING> will be consulted.
294 If that variable isn't set, the encoding pragma will fail.
296 The C<Encode> module knows about many encodings and has interfaces
297 for doing conversions between those encodings:
299 use Encode 'from_to';
300 from_to($data, "iso-8859-3", "utf-8"); # from legacy to utf-8
304 Normally, writing out Unicode data
306 print FH $some_string_with_unicode, "\n";
308 produces raw bytes that Perl happens to use to internally encode the
309 Unicode string. Perl's internal encoding depends on the system as
310 well as what characters happen to be in the string at the time. If
311 any of the characters are at code points C<0x100> or above, you will get
312 a warning. To ensure that the output is explicitly rendered in the
313 encoding you desire--and to avoid the warning--open the stream with
314 the desired encoding. Some examples:
316 open FH, ">:utf8", "file";
318 open FH, ">:encoding(ucs2)", "file";
319 open FH, ">:encoding(UTF-8)", "file";
320 open FH, ">:encoding(shift_jis)", "file";
322 and on already open streams, use C<binmode()>:
324 binmode(STDOUT, ":utf8");
326 binmode(STDOUT, ":encoding(ucs2)");
327 binmode(STDOUT, ":encoding(UTF-8)");
328 binmode(STDOUT, ":encoding(shift_jis)");
330 The matching of encoding names is loose: case does not matter, and
331 many encodings have several aliases. Note that the C<:utf8> layer
332 must always be specified exactly like that; it is I<not> subject to
333 the loose matching of encoding names.
335 See L<PerlIO> for the C<:utf8> layer, L<PerlIO::encoding> and
336 L<Encode::PerlIO> for the C<:encoding()> layer, and
337 L<Encode::Supported> for many encodings supported by the C<Encode>
340 Reading in a file that you know happens to be encoded in one of the
341 Unicode or legacy encodings does not magically turn the data into
342 Unicode in Perl's eyes. To do that, specify the appropriate
343 layer when opening files
345 open(my $fh,'<:utf8', 'anything');
346 my $line_of_unicode = <$fh>;
348 open(my $fh,'<:encoding(Big5)', 'anything');
349 my $line_of_unicode = <$fh>;
351 The I/O layers can also be specified more flexibly with
352 the C<open> pragma. See L<open>, or look at the following example.
354 use open ':utf8'; # input and output default layer will be UTF-8
356 print X chr(0x100), "\n";
359 printf "%#x\n", ord(<Y>); # this should print 0x100
362 With the C<open> pragma you can use the C<:locale> layer
364 $ENV{LC_ALL} = $ENV{LANG} = 'ru_RU.KOI8-R';
365 # the :locale will probe the locale environment variables like LC_ALL
366 use open OUT => ':locale'; # russki parusski
368 print O chr(0x430); # Unicode CYRILLIC SMALL LETTER A = KOI8-R 0xc1
371 printf "%#x\n", ord(<I>), "\n"; # this should print 0xc1
374 or you can also use the C<':encoding(...)'> layer
376 open(my $epic,'<:encoding(iso-8859-7)','iliad.greek');
377 my $line_of_unicode = <$epic>;
379 These methods install a transparent filter on the I/O stream that
380 converts data from the specified encoding when it is read in from the
381 stream. The result is always Unicode.
383 The L<open> pragma affects all the C<open()> calls after the pragma by
384 setting default layers. If you want to affect only certain
385 streams, use explicit layers directly in the C<open()> call.
387 You can switch encodings on an already opened stream by using
388 C<binmode()>; see L<perlfunc/binmode>.
390 The C<:locale> does not currently (as of Perl 5.8.0) work with
391 C<open()> and C<binmode()>, only with the C<open> pragma. The
392 C<:utf8> and C<:encoding(...)> methods do work with all of C<open()>,
393 C<binmode()>, and the C<open> pragma.
395 Similarly, you may use these I/O layers on output streams to
396 automatically convert Unicode to the specified encoding when it is
397 written to the stream. For example, the following snippet copies the
398 contents of the file "text.jis" (encoded as ISO-2022-JP, aka JIS) to
399 the file "text.utf8", encoded as UTF-8:
401 open(my $nihongo, '<:encoding(iso2022-jp)', 'text.jis');
402 open(my $unicode, '>:utf8', 'text.utf8');
403 while (<$nihongo>) { print $unicode }
405 The naming of encodings, both by the C<open()> and by the C<open>
406 pragma, is similar to the C<encoding> pragma in that it allows for
407 flexible names: C<koi8-r> and C<KOI8R> will both be understood.
409 Common encodings recognized by ISO, MIME, IANA, and various other
410 standardisation organisations are recognised; for a more detailed
411 list see L<Encode::Supported>.
413 C<read()> reads characters and returns the number of characters.
414 C<seek()> and C<tell()> operate on byte counts, as do C<sysread()>
417 Notice that because of the default behaviour of not doing any
418 conversion upon input if there is no default layer,
419 it is easy to mistakenly write code that keeps on expanding a file
420 by repeatedly encoding the data:
424 local $/; ## read in the whole file of 8-bit characters
427 open F, ">:utf8", "file";
428 print F $t; ## convert to UTF-8 on output
431 If you run this code twice, the contents of the F<file> will be twice
432 UTF-8 encoded. A C<use open ':utf8'> would have avoided the bug, or
433 explicitly opening also the F<file> for input as UTF-8.
435 B<NOTE>: the C<:utf8> and C<:encoding> features work only if your
436 Perl has been built with the new PerlIO feature.
438 =head2 Displaying Unicode As Text
440 Sometimes you might want to display Perl scalars containing Unicode as
441 simple ASCII (or EBCDIC) text. The following subroutine converts
442 its argument so that Unicode characters with code points greater than
443 255 are displayed as C<\x{...}>, control characters (like C<\n>) are
444 displayed as C<\x..>, and the rest of the characters as themselves:
448 map { $_ > 255 ? # if wide character...
449 sprintf("\\x{%04X}", $_) : # \x{...}
450 chr($_) =~ /[[:cntrl:]]/ ? # else if control character ...
451 sprintf("\\x%02X", $_) : # \x..
452 chr($_) # else as themselves
453 } unpack("U*", $_[0])); # unpack Unicode characters
458 nice_string("foo\x{100}bar\n")
470 Bit Complement Operator ~ And vec()
472 The bit complement operator C<~> may produce surprising results if
473 used on strings containing characters with ordinal values above
474 255. In such a case, the results are consistent with the internal
475 encoding of the characters, but not with much else. So don't do
476 that. Similarly for C<vec()>: you will be operating on the
477 internally-encoded bit patterns of the Unicode characters, not on
478 the code point values, which is very probably not what you want.
482 Peeking At Perl's Internal Encoding
484 Normal users of Perl should never care how Perl encodes any particular
485 Unicode string (because the normal ways to get at the contents of a
486 string with Unicode--via input and output--should always be via
487 explicitly-defined I/O layers). But if you must, there are two
488 ways of looking behind the scenes.
490 One way of peeking inside the internal encoding of Unicode characters
491 is to use C<unpack("C*", ...> to get the bytes or C<unpack("H*", ...)>
492 to display the bytes:
494 # this prints c4 80 for the UTF-8 bytes 0xc4 0x80
495 print join(" ", unpack("H*", pack("U", 0x100))), "\n";
497 Yet another way would be to use the Devel::Peek module:
499 perl -MDevel::Peek -e 'Dump(chr(0x100))'
501 That shows the UTF8 flag in FLAGS and both the UTF-8 bytes
502 and Unicode characters in C<PV>. See also later in this document
503 the discussion about the C<is_utf8> function of the C<Encode> module.
507 =head2 Advanced Topics
515 The question of string equivalence turns somewhat complicated
516 in Unicode: what do you mean by "equal"?
518 (Is C<LATIN CAPITAL LETTER A WITH ACUTE> equal to
519 C<LATIN CAPITAL LETTER A>?)
521 The short answer is that by default Perl compares equivalence (C<eq>,
522 C<ne>) based only on code points of the characters. In the above
523 case, the answer is no (because 0x00C1 != 0x0041). But sometimes, any
524 CAPITAL LETTER As should be considered equal, or even As of any case.
526 The long answer is that you need to consider character normalization
527 and casing issues: see L<Unicode::Normalize>, Unicode Technical
528 Reports #15 and #21, I<Unicode Normalization Forms> and I<Case
529 Mappings>, http://www.unicode.org/unicode/reports/tr15/ and
530 http://www.unicode.org/unicode/reports/tr21/
532 As of Perl 5.8.0, the "Full" case-folding of I<Case
533 Mappings/SpecialCasing> is implemented.
539 People like to see their strings nicely sorted--or as Unicode
540 parlance goes, collated. But again, what do you mean by collate?
542 (Does C<LATIN CAPITAL LETTER A WITH ACUTE> come before or after
543 C<LATIN CAPITAL LETTER A WITH GRAVE>?)
545 The short answer is that by default, Perl compares strings (C<lt>,
546 C<le>, C<cmp>, C<ge>, C<gt>) based only on the code points of the
547 characters. In the above case, the answer is "after", since
548 C<0x00C1> > C<0x00C0>.
550 The long answer is that "it depends", and a good answer cannot be
551 given without knowing (at the very least) the language context.
552 See L<Unicode::Collate>, and I<Unicode Collation Algorithm>
553 http://www.unicode.org/unicode/reports/tr10/
563 Character Ranges and Classes
565 Character ranges in regular expression character classes (C</[a-z]/>)
566 and in the C<tr///> (also known as C<y///>) operator are not magically
567 Unicode-aware. What this means that C<[A-Za-z]> will not magically start
568 to mean "all alphabetic letters"; not that it does mean that even for
569 8-bit characters, you should be using C</[[:alpha:]]/> in that case.
571 For specifying character classes like that in regular expressions,
572 you can use the various Unicode properties--C<\pL>, or perhaps
573 C<\p{Alphabetic}>, in this particular case. You can use Unicode
574 code points as the end points of character ranges, but there is no
575 magic associated with specifying a certain range. For further
576 information--there are dozens of Unicode character classes--see
581 String-To-Number Conversions
583 Unicode does define several other decimal--and numeric--characters
584 besides the familiar 0 to 9, such as the Arabic and Indic digits.
585 Perl does not support string-to-number conversion for digits other
586 than ASCII 0 to 9 (and ASCII a to f for hexadecimal).
590 =head2 Questions With Answers
596 Will My Old Scripts Break?
598 Very probably not. Unless you are generating Unicode characters
599 somehow, old behaviour should be preserved. About the only behaviour
600 that has changed and which could start generating Unicode is the old
601 behaviour of C<chr()> where supplying an argument more than 255
602 produced a character modulo 255. C<chr(300)>, for example, was equal
603 to C<chr(45)> or "-" (in ASCII), now it is LATIN CAPITAL LETTER I WITH
608 How Do I Make My Scripts Work With Unicode?
610 Very little work should be needed since nothing changes until you
611 generate Unicode data. The most important thing is getting input as
612 Unicode; for that, see the earlier I/O discussion.
616 How Do I Know Whether My String Is In Unicode?
618 You shouldn't care. No, you really shouldn't. No, really. If you
619 have to care--beyond the cases described above--it means that we
620 didn't get the transparency of Unicode quite right.
624 use Encode 'is_utf8';
625 print is_utf8($string) ? 1 : 0, "\n";
627 But note that this doesn't mean that any of the characters in the
628 string are necessary UTF-8 encoded, or that any of the characters have
629 code points greater than 0xFF (255) or even 0x80 (128), or that the
630 string has any characters at all. All the C<is_utf8()> does is to
631 return the value of the internal "utf8ness" flag attached to the
632 C<$string>. If the flag is off, the bytes in the scalar are interpreted
633 as a single byte encoding. If the flag is on, the bytes in the scalar
634 are interpreted as the (multi-byte, variable-length) UTF-8 encoded code
635 points of the characters. Bytes added to an UTF-8 encoded string are
636 automatically upgraded to UTF-8. If mixed non-UTF8 and UTF-8 scalars
637 are merged (double-quoted interpolation, explicit concatenation, and
638 printf/sprintf parameter substitution), the result will be UTF-8 encoded
639 as if copies of the byte strings were upgraded to UTF-8: for example,
645 the output string will be UTF-8-encoded C<ab\x80c\x{100}\n>, but note
646 that C<$a> will stay byte-encoded.
648 Sometimes you might really need to know the byte length of a string
649 instead of the character length. For that use either the
650 C<Encode::encode_utf8()> function or the C<bytes> pragma and its only
651 defined function C<length()>:
653 my $unicode = chr(0x100);
654 print length($unicode), "\n"; # will print 1
656 print length(Encode::encode_utf8($unicode)), "\n"; # will print 2
658 print length($unicode), "\n"; # will also print 2
659 # (the 0xC4 0x80 of the UTF-8)
663 How Do I Detect Data That's Not Valid In a Particular Encoding?
665 Use the C<Encode> package to try converting it.
668 use Encode 'encode_utf8';
669 if (encode_utf8($string_of_bytes_that_I_think_is_utf8)) {
675 For UTF-8 only, you can use:
678 @chars = unpack("U0U*", $string_of_bytes_that_I_think_is_utf8);
680 If invalid, a C<Malformed UTF-8 character (byte 0x##) in unpack>
681 warning is produced. The "U0" means "expect strictly UTF-8 encoded
682 Unicode". Without that the C<unpack("U*", ...)> would accept also
683 data like C<chr(0xFF>), similarly to the C<pack> as we saw earlier.
687 How Do I Convert Binary Data Into a Particular Encoding, Or Vice Versa?
689 This probably isn't as useful as you might think.
690 Normally, you shouldn't need to.
692 In one sense, what you are asking doesn't make much sense: encodings
693 are for characters, and binary data are not "characters", so converting
694 "data" into some encoding isn't meaningful unless you know in what
695 character set and encoding the binary data is in, in which case it's
696 not just binary data, now is it?
698 If you have a raw sequence of bytes that you know should be
699 interpreted via a particular encoding, you can use C<Encode>:
701 use Encode 'from_to';
702 from_to($data, "iso-8859-1", "utf-8"); # from latin-1 to utf-8
704 The call to C<from_to()> changes the bytes in C<$data>, but nothing
705 material about the nature of the string has changed as far as Perl is
706 concerned. Both before and after the call, the string C<$data>
707 contains just a bunch of 8-bit bytes. As far as Perl is concerned,
708 the encoding of the string remains as "system-native 8-bit bytes".
710 You might relate this to a fictional 'Translate' module:
714 Translate::from_to($phrase, 'english', 'deutsch');
715 ## phrase now contains "Ja"
717 The contents of the string changes, but not the nature of the string.
718 Perl doesn't know any more after the call than before that the
719 contents of the string indicates the affirmative.
721 Back to converting data. If you have (or want) data in your system's
722 native 8-bit encoding (e.g. Latin-1, EBCDIC, etc.), you can use
723 pack/unpack to convert to/from Unicode.
725 $native_string = pack("C*", unpack("U*", $Unicode_string));
726 $Unicode_string = pack("U*", unpack("C*", $native_string));
728 If you have a sequence of bytes you B<know> is valid UTF-8,
729 but Perl doesn't know it yet, you can make Perl a believer, too:
731 use Encode 'decode_utf8';
732 $Unicode = decode_utf8($bytes);
734 You can convert well-formed UTF-8 to a sequence of bytes, but if
735 you just want to convert random binary data into UTF-8, you can't.
736 B<Any random collection of bytes isn't well-formed UTF-8>. You can
737 use C<unpack("C*", $string)> for the former, and you can create
738 well-formed Unicode data by C<pack("U*", 0xff, ...)>.
742 How Do I Display Unicode? How Do I Input Unicode?
744 See http://www.alanwood.net/unicode/ and
745 http://www.cl.cam.ac.uk/~mgk25/unicode.html
749 How Does Unicode Work With Traditional Locales?
751 In Perl, not very well. Avoid using locales through the C<locale>
752 pragma. Use only one or the other.
756 =head2 Hexadecimal Notation
758 The Unicode standard prefers using hexadecimal notation because
759 that more clearly shows the division of Unicode into blocks of 256 characters.
760 Hexadecimal is also simply shorter than decimal. You can use decimal
761 notation, too, but learning to use hexadecimal just makes life easier
762 with the Unicode standard. The C<U+HHHH> notation uses hexadecimal,
765 The C<0x> prefix means a hexadecimal number, the digits are 0-9 I<and>
766 a-f (or A-F, case doesn't matter). Each hexadecimal digit represents
767 four bits, or half a byte. C<print 0x..., "\n"> will show a
768 hexadecimal number in decimal, and C<printf "%x\n", $decimal> will
769 show a decimal number in hexadecimal. If you have just the
770 "hex digits" of a hexadecimal number, you can use the C<hex()> function.
772 print 0x0009, "\n"; # 9
773 print 0x000a, "\n"; # 10
774 print 0x000f, "\n"; # 15
775 print 0x0010, "\n"; # 16
776 print 0x0011, "\n"; # 17
777 print 0x0100, "\n"; # 256
779 print 0x0041, "\n"; # 65
781 printf "%x\n", 65; # 41
782 printf "%#x\n", 65; # 0x41
784 print hex("41"), "\n"; # 65
786 =head2 Further Resources
794 http://www.unicode.org/
800 http://www.unicode.org/unicode/faq/
806 http://www.unicode.org/glossary/
810 Unicode Useful Resources
812 http://www.unicode.org/unicode/onlinedat/resources.html
816 Unicode and Multilingual Support in HTML, Fonts, Web Browsers and Other Applications
818 http://www.alanwood.net/unicode/
822 UTF-8 and Unicode FAQ for Unix/Linux
824 http://www.cl.cam.ac.uk/~mgk25/unicode.html
828 Legacy Character Sets
830 http://www.czyborra.com/
831 http://www.eki.ee/letter/
835 The Unicode support files live within the Perl installation in the
838 $Config{installprivlib}/unicore
840 in Perl 5.8.0 or newer, and
842 $Config{installprivlib}/unicode
844 in the Perl 5.6 series. (The renaming to F<lib/unicore> was done to
845 avoid naming conflicts with lib/Unicode in case-insensitive filesystems.)
846 The main Unicode data file is F<UnicodeData.txt> (or F<Unicode.301> in
847 Perl 5.6.1.) You can find the C<$Config{installprivlib}> by
849 perl "-V:installprivlib"
851 You can explore various information from the Unicode data files using
852 the C<Unicode::UCD> module.
856 =head1 UNICODE IN OLDER PERLS
858 If you cannot upgrade your Perl to 5.8.0 or later, you can still
859 do some Unicode processing by using the modules C<Unicode::String>,
860 C<Unicode::Map8>, and C<Unicode::Map>, available from CPAN.
861 If you have the GNU recode installed, you can also use the
862 Perl front-end C<Convert::Recode> for character conversions.
864 The following are fast conversions from ISO 8859-1 (Latin-1) bytes
865 to UTF-8 bytes, the code works even with older Perl 5 versions.
867 # ISO 8859-1 to UTF-8
868 s/([\x80-\xFF])/chr(0xC0|ord($1)>>6).chr(0x80|ord($1)&0x3F)/eg;
870 # UTF-8 to ISO 8859-1
871 s/([\xC2\xC3])([\x80-\xBF])/chr(ord($1)<<6&0xC0|ord($2)&0x3F)/eg;
875 L<perlunicode>, L<Encode>, L<encoding>, L<open>, L<utf8>, L<bytes>,
876 L<perlretut>, L<Unicode::Collate>, L<Unicode::Normalize>, L<Unicode::UCD>
878 =head1 ACKNOWLEDGMENTS
880 Thanks to the kind readers of the perl5-porters@perl.org,
881 perl-unicode@perl.org, linux-utf8@nl.linux.org, and unicore@unicode.org
882 mailing lists for their valuable feedback.
884 =head1 AUTHOR, COPYRIGHT, AND LICENSE
886 Copyright 2001-2002 Jarkko Hietaniemi <jhi@iki.fi>
888 This document may be distributed under the same terms as Perl itself.