3 perlfunc - Perl builtin functions
7 The functions in this section can serve as terms in an expression.
8 They fall into two major categories: list operators and named unary
9 operators. These differ in their precedence relationship with a
10 following comma. (See the precedence table in L<perlop>.) List
11 operators take more than one argument, while unary operators can never
12 take more than one argument. Thus, a comma terminates the argument of
13 a unary operator, but merely separates the arguments of a list
14 operator. A unary operator generally provides a scalar context to its
15 argument, while a list operator may provide either scalar or list
16 contexts for its arguments. If it does both, the scalar arguments will
17 be first, and the list argument will follow. (Note that there can ever
18 be only one such list argument.) For instance, splice() has three scalar
19 arguments followed by a list, whereas gethostbyname() has four scalar
22 In the syntax descriptions that follow, list operators that expect a
23 list (and provide list context for the elements of the list) are shown
24 with LIST as an argument. Such a list may consist of any combination
25 of scalar arguments or list values; the list values will be included
26 in the list as if each individual element were interpolated at that
27 point in the list, forming a longer single-dimensional list value.
28 Elements of the LIST should be separated by commas.
30 Any function in the list below may be used either with or without
31 parentheses around its arguments. (The syntax descriptions omit the
32 parentheses.) If you use the parentheses, the simple (but occasionally
33 surprising) rule is this: It I<looks> like a function, therefore it I<is> a
34 function, and precedence doesn't matter. Otherwise it's a list
35 operator or unary operator, and precedence does matter. And whitespace
36 between the function and left parenthesis doesn't count--so you need to
39 print 1+2+4; # Prints 7.
40 print(1+2) + 4; # Prints 3.
41 print (1+2)+4; # Also prints 3!
42 print +(1+2)+4; # Prints 7.
43 print ((1+2)+4); # Prints 7.
45 If you run Perl with the B<-w> switch it can warn you about this. For
46 example, the third line above produces:
48 print (...) interpreted as function at - line 1.
49 Useless use of integer addition in void context at - line 1.
51 A few functions take no arguments at all, and therefore work as neither
52 unary nor list operators. These include such functions as C<time>
53 and C<endpwent>. For example, C<time+86_400> always means
56 For functions that can be used in either a scalar or list context,
57 nonabortive failure is generally indicated in a scalar context by
58 returning the undefined value, and in a list context by returning the
61 Remember the following important rule: There is B<no rule> that relates
62 the behavior of an expression in list context to its behavior in scalar
63 context, or vice versa. It might do two totally different things.
64 Each operator and function decides which sort of value it would be most
65 appropriate to return in scalar context. Some operators return the
66 length of the list that would have been returned in list context. Some
67 operators return the first value in the list. Some operators return the
68 last value in the list. Some operators return a count of successful
69 operations. In general, they do what you want, unless you want
72 An named array in scalar context is quite different from what would at
73 first glance appear to be a list in scalar context. You can't get a list
74 like C<(1,2,3)> into being in scalar context, because the compiler knows
75 the context at compile time. It would generate the scalar comma operator
76 there, not the list construction version of the comma. That means it
77 was never a list to start with.
79 In general, functions in Perl that serve as wrappers for system calls
80 of the same name (like chown(2), fork(2), closedir(2), etc.) all return
81 true when they succeed and C<undef> otherwise, as is usually mentioned
82 in the descriptions below. This is different from the C interfaces,
83 which return C<-1> on failure. Exceptions to this rule are C<wait>,
84 C<waitpid>, and C<syscall>. System calls also set the special C<$!>
85 variable on failure. Other functions do not, except accidentally.
87 =head2 Perl Functions by Category
89 Here are Perl's functions (including things that look like
90 functions, like some keywords and named operators)
91 arranged by category. Some functions appear in more
96 =item Functions for SCALARs or strings
98 C<chomp>, C<chop>, C<chr>, C<crypt>, C<hex>, C<index>, C<lc>, C<lcfirst>,
99 C<length>, C<oct>, C<ord>, C<pack>, C<q/STRING/>, C<qq/STRING/>, C<reverse>,
100 C<rindex>, C<sprintf>, C<substr>, C<tr///>, C<uc>, C<ucfirst>, C<y///>
102 =item Regular expressions and pattern matching
104 C<m//>, C<pos>, C<quotemeta>, C<s///>, C<split>, C<study>, C<qr//>
106 =item Numeric functions
108 C<abs>, C<atan2>, C<cos>, C<exp>, C<hex>, C<int>, C<log>, C<oct>, C<rand>,
109 C<sin>, C<sqrt>, C<srand>
111 =item Functions for real @ARRAYs
113 C<pop>, C<push>, C<shift>, C<splice>, C<unshift>
115 =item Functions for list data
117 C<grep>, C<join>, C<map>, C<qw/STRING/>, C<reverse>, C<sort>, C<unpack>
119 =item Functions for real %HASHes
121 C<delete>, C<each>, C<exists>, C<keys>, C<values>
123 =item Input and output functions
125 C<binmode>, C<close>, C<closedir>, C<dbmclose>, C<dbmopen>, C<die>, C<eof>,
126 C<fileno>, C<flock>, C<format>, C<getc>, C<print>, C<printf>, C<read>,
127 C<readdir>, C<rewinddir>, C<seek>, C<seekdir>, C<select>, C<syscall>,
128 C<sysread>, C<sysseek>, C<syswrite>, C<tell>, C<telldir>, C<truncate>,
131 =item Functions for fixed length data or records
133 C<pack>, C<read>, C<syscall>, C<sysread>, C<syswrite>, C<unpack>, C<vec>
135 =item Functions for filehandles, files, or directories
137 C<-I<X>>, C<chdir>, C<chmod>, C<chown>, C<chroot>, C<fcntl>, C<glob>,
138 C<ioctl>, C<link>, C<lstat>, C<mkdir>, C<open>, C<opendir>,
139 C<readlink>, C<rename>, C<rmdir>, C<stat>, C<symlink>, C<umask>,
142 =item Keywords related to the control flow of your perl program
144 C<caller>, C<continue>, C<die>, C<do>, C<dump>, C<eval>, C<exit>,
145 C<goto>, C<last>, C<next>, C<redo>, C<return>, C<sub>, C<wantarray>
147 =item Keywords related to scoping
149 C<caller>, C<import>, C<local>, C<my>, C<our>, C<package>, C<use>
151 =item Miscellaneous functions
153 C<defined>, C<dump>, C<eval>, C<formline>, C<local>, C<my>, C<our>, C<reset>,
154 C<scalar>, C<undef>, C<wantarray>
156 =item Functions for processes and process groups
158 C<alarm>, C<exec>, C<fork>, C<getpgrp>, C<getppid>, C<getpriority>, C<kill>,
159 C<pipe>, C<qx/STRING/>, C<setpgrp>, C<setpriority>, C<sleep>, C<system>,
160 C<times>, C<wait>, C<waitpid>
162 =item Keywords related to perl modules
164 C<do>, C<import>, C<no>, C<package>, C<require>, C<use>
166 =item Keywords related to classes and object-orientedness
168 C<bless>, C<dbmclose>, C<dbmopen>, C<package>, C<ref>, C<tie>, C<tied>,
171 =item Low-level socket functions
173 C<accept>, C<bind>, C<connect>, C<getpeername>, C<getsockname>,
174 C<getsockopt>, C<listen>, C<recv>, C<send>, C<setsockopt>, C<shutdown>,
175 C<socket>, C<socketpair>
177 =item System V interprocess communication functions
179 C<msgctl>, C<msgget>, C<msgrcv>, C<msgsnd>, C<semctl>, C<semget>, C<semop>,
180 C<shmctl>, C<shmget>, C<shmread>, C<shmwrite>
182 =item Fetching user and group info
184 C<endgrent>, C<endhostent>, C<endnetent>, C<endpwent>, C<getgrent>,
185 C<getgrgid>, C<getgrnam>, C<getlogin>, C<getpwent>, C<getpwnam>,
186 C<getpwuid>, C<setgrent>, C<setpwent>
188 =item Fetching network info
190 C<endprotoent>, C<endservent>, C<gethostbyaddr>, C<gethostbyname>,
191 C<gethostent>, C<getnetbyaddr>, C<getnetbyname>, C<getnetent>,
192 C<getprotobyname>, C<getprotobynumber>, C<getprotoent>,
193 C<getservbyname>, C<getservbyport>, C<getservent>, C<sethostent>,
194 C<setnetent>, C<setprotoent>, C<setservent>
196 =item Time-related functions
198 C<gmtime>, C<localtime>, C<time>, C<times>
200 =item Functions new in perl5
202 C<abs>, C<bless>, C<chomp>, C<chr>, C<exists>, C<formline>, C<glob>,
203 C<import>, C<lc>, C<lcfirst>, C<map>, C<my>, C<no>, C<our>, C<prototype>,
204 C<qx>, C<qw>, C<readline>, C<readpipe>, C<ref>, C<sub*>, C<sysopen>, C<tie>,
205 C<tied>, C<uc>, C<ucfirst>, C<untie>, C<use>
207 * - C<sub> was a keyword in perl4, but in perl5 it is an
208 operator, which can be used in expressions.
210 =item Functions obsoleted in perl5
212 C<dbmclose>, C<dbmopen>
218 Perl was born in Unix and can therefore access all common Unix
219 system calls. In non-Unix environments, the functionality of some
220 Unix system calls may not be available, or details of the available
221 functionality may differ slightly. The Perl functions affected
224 C<-X>, C<binmode>, C<chmod>, C<chown>, C<chroot>, C<crypt>,
225 C<dbmclose>, C<dbmopen>, C<dump>, C<endgrent>, C<endhostent>,
226 C<endnetent>, C<endprotoent>, C<endpwent>, C<endservent>, C<exec>,
227 C<fcntl>, C<flock>, C<fork>, C<getgrent>, C<getgrgid>, C<gethostent>,
228 C<getlogin>, C<getnetbyaddr>, C<getnetbyname>, C<getnetent>,
229 C<getppid>, C<getprgp>, C<getpriority>, C<getprotobynumber>,
230 C<getprotoent>, C<getpwent>, C<getpwnam>, C<getpwuid>,
231 C<getservbyport>, C<getservent>, C<getsockopt>, C<glob>, C<ioctl>,
232 C<kill>, C<link>, C<lstat>, C<msgctl>, C<msgget>, C<msgrcv>,
233 C<msgsnd>, C<open>, C<pipe>, C<readlink>, C<rename>, C<select>, C<semctl>,
234 C<semget>, C<semop>, C<setgrent>, C<sethostent>, C<setnetent>,
235 C<setpgrp>, C<setpriority>, C<setprotoent>, C<setpwent>,
236 C<setservent>, C<setsockopt>, C<shmctl>, C<shmget>, C<shmread>,
237 C<shmwrite>, C<socket>, C<socketpair>, C<stat>, C<symlink>, C<syscall>,
238 C<sysopen>, C<system>, C<times>, C<truncate>, C<umask>, C<unlink>,
239 C<utime>, C<wait>, C<waitpid>
241 For more information about the portability of these functions, see
242 L<perlport> and other available platform-specific documentation.
244 =head2 Alphabetical Listing of Perl Functions
248 =item I<-X> FILEHANDLE
254 A file test, where X is one of the letters listed below. This unary
255 operator takes one argument, either a filename or a filehandle, and
256 tests the associated file to see if something is true about it. If the
257 argument is omitted, tests C<$_>, except for C<-t>, which tests STDIN.
258 Unless otherwise documented, it returns C<1> for true and C<''> for false, or
259 the undefined value if the file doesn't exist. Despite the funny
260 names, precedence is the same as any other named unary operator, and
261 the argument may be parenthesized like any other unary operator. The
262 operator may be any of:
263 X<-r>X<-w>X<-x>X<-o>X<-R>X<-W>X<-X>X<-O>X<-e>X<-z>X<-s>X<-f>X<-d>X<-l>X<-p>
264 X<-S>X<-b>X<-c>X<-t>X<-u>X<-g>X<-k>X<-T>X<-B>X<-M>X<-A>X<-C>
266 -r File is readable by effective uid/gid.
267 -w File is writable by effective uid/gid.
268 -x File is executable by effective uid/gid.
269 -o File is owned by effective uid.
271 -R File is readable by real uid/gid.
272 -W File is writable by real uid/gid.
273 -X File is executable by real uid/gid.
274 -O File is owned by real uid.
277 -z File has zero size (is empty).
278 -s File has nonzero size (returns size in bytes).
280 -f File is a plain file.
281 -d File is a directory.
282 -l File is a symbolic link.
283 -p File is a named pipe (FIFO), or Filehandle is a pipe.
285 -b File is a block special file.
286 -c File is a character special file.
287 -t Filehandle is opened to a tty.
289 -u File has setuid bit set.
290 -g File has setgid bit set.
291 -k File has sticky bit set.
293 -T File is an ASCII text file.
294 -B File is a "binary" file (opposite of -T).
296 -M Age of file in days when script started.
297 -A Same for access time.
298 -C Same for inode change time.
304 next unless -f $_; # ignore specials
308 The interpretation of the file permission operators C<-r>, C<-R>,
309 C<-w>, C<-W>, C<-x>, and C<-X> is by default based solely on the mode
310 of the file and the uids and gids of the user. There may be other
311 reasons you can't actually read, write, or execute the file. Such
312 reasons may be for example network filesystem access controls, ACLs
313 (access control lists), read-only filesystems, and unrecognized
316 Also note that, for the superuser on the local filesystems, the C<-r>,
317 C<-R>, C<-w>, and C<-W> tests always return 1, and C<-x> and C<-X> return 1
318 if any execute bit is set in the mode. Scripts run by the superuser
319 may thus need to do a stat() to determine the actual mode of the file,
320 or temporarily set their effective uid to something else.
322 If you are using ACLs, there is a pragma called C<filetest> that may
323 produce more accurate results than the bare stat() mode bits.
324 When under the C<use filetest 'access'> the above-mentioned filetests
325 will test whether the permission can (not) be granted using the
326 access() family of system calls. Also note that the C<-x> and C<-X> may
327 under this pragma return true even if there are no execute permission
328 bits set (nor any extra execute permission ACLs). This strangeness is
329 due to the underlying system calls' definitions. Read the
330 documentation for the C<filetest> pragma for more information.
332 Note that C<-s/a/b/> does not do a negated substitution. Saying
333 C<-exp($foo)> still works as expected, however--only single letters
334 following a minus are interpreted as file tests.
336 The C<-T> and C<-B> switches work as follows. The first block or so of the
337 file is examined for odd characters such as strange control codes or
338 characters with the high bit set. If too many strange characters (>30%)
339 are found, it's a C<-B> file, otherwise it's a C<-T> file. Also, any file
340 containing null in the first block is considered a binary file. If C<-T>
341 or C<-B> is used on a filehandle, the current stdio buffer is examined
342 rather than the first block. Both C<-T> and C<-B> return true on a null
343 file, or a file at EOF when testing a filehandle. Because you have to
344 read a file to do the C<-T> test, on most occasions you want to use a C<-f>
345 against the file first, as in C<next unless -f $file && -T $file>.
347 If any of the file tests (or either the C<stat> or C<lstat> operators) are given
348 the special filehandle consisting of a solitary underline, then the stat
349 structure of the previous file test (or stat operator) is used, saving
350 a system call. (This doesn't work with C<-t>, and you need to remember
351 that lstat() and C<-l> will leave values in the stat structure for the
352 symbolic link, not the real file.) Example:
354 print "Can do.\n" if -r $a || -w _ || -x _;
357 print "Readable\n" if -r _;
358 print "Writable\n" if -w _;
359 print "Executable\n" if -x _;
360 print "Setuid\n" if -u _;
361 print "Setgid\n" if -g _;
362 print "Sticky\n" if -k _;
363 print "Text\n" if -T _;
364 print "Binary\n" if -B _;
370 Returns the absolute value of its argument.
371 If VALUE is omitted, uses C<$_>.
373 =item accept NEWSOCKET,GENERICSOCKET
375 Accepts an incoming socket connect, just as the accept(2) system call
376 does. Returns the packed address if it succeeded, false otherwise.
377 See the example in L<perlipc/"Sockets: Client/Server Communication">.
379 On systems that support a close-on-exec flag on files, the flag will
380 be set for the newly opened file descriptor, as determined by the
381 value of $^F. See L<perlvar/$^F>.
387 Arranges to have a SIGALRM delivered to this process after the
388 specified number of seconds have elapsed. If SECONDS is not specified,
389 the value stored in C<$_> is used. (On some machines,
390 unfortunately, the elapsed time may be up to one second less than you
391 specified because of how seconds are counted.) Only one timer may be
392 counting at once. Each call disables the previous timer, and an
393 argument of C<0> may be supplied to cancel the previous timer without
394 starting a new one. The returned value is the amount of time remaining
395 on the previous timer.
397 For delays of finer granularity than one second, you may use Perl's
398 four-argument version of select() leaving the first three arguments
399 undefined, or you might be able to use the C<syscall> interface to
400 access setitimer(2) if your system supports it. The Time::HiRes module
401 from CPAN may also prove useful.
403 It is usually a mistake to intermix C<alarm> and C<sleep> calls.
404 (C<sleep> may be internally implemented in your system with C<alarm>)
406 If you want to use C<alarm> to time out a system call you need to use an
407 C<eval>/C<die> pair. You can't rely on the alarm causing the system call to
408 fail with C<$!> set to C<EINTR> because Perl sets up signal handlers to
409 restart system calls on some systems. Using C<eval>/C<die> always works,
410 modulo the caveats given in L<perlipc/"Signals">.
413 local $SIG{ALRM} = sub { die "alarm\n" }; # NB: \n required
415 $nread = sysread SOCKET, $buffer, $size;
419 die unless $@ eq "alarm\n"; # propagate unexpected errors
428 Returns the arctangent of Y/X in the range -PI to PI.
430 For the tangent operation, you may use the C<Math::Trig::tan>
431 function, or use the familiar relation:
433 sub tan { sin($_[0]) / cos($_[0]) }
435 =item bind SOCKET,NAME
437 Binds a network address to a socket, just as the bind system call
438 does. Returns true if it succeeded, false otherwise. NAME should be a
439 packed address of the appropriate type for the socket. See the examples in
440 L<perlipc/"Sockets: Client/Server Communication">.
442 =item binmode FILEHANDLE, DISCIPLINE
444 =item binmode FILEHANDLE
446 Arranges for FILEHANDLE to be read or written in "binary" or "text" mode
447 on systems where the run-time libraries distinguish between binary and
448 text files. If FILEHANDLE is an expression, the value is taken as the
449 name of the filehandle. DISCIPLINE can be either of C<":raw"> for
450 binary mode or C<":crlf"> for "text" mode. If the DISCIPLINE is
451 omitted, it defaults to C<":raw">.
453 binmode() should be called after open() but before any I/O is done on
456 On many systems binmode() currently has no effect, but in future, it
457 will be extended to support user-defined input and output disciplines.
458 On some systems binmode() is necessary when you're not working with a
459 text file. For the sake of portability it is a good idea to always use
460 it when appropriate, and to never use it when it isn't appropriate.
462 In other words: Regardless of platform, use binmode() on binary
463 files, and do not use binmode() on text files.
465 The C<open> pragma can be used to establish default disciplines.
468 The operating system, device drivers, C libraries, and Perl run-time
469 system all work together to let the programmer treat a single
470 character (C<\n>) as the line terminator, irrespective of the external
471 representation. On many operating systems, the native text file
472 representation matches the internal representation, but on some
473 platforms the external representation of C<\n> is made up of more than
476 Mac OS and all variants of Unix use a single character to end each line
477 in the external representation of text (even though that single
478 character is not necessarily the same across these platforms).
479 Consequently binmode() has no effect on these operating systems. In
480 other systems like VMS, MS-DOS and the various flavors of MS-Windows
481 your program sees a C<\n> as a simple C<\cJ>, but what's stored in text
482 files are the two characters C<\cM\cJ>. That means that, if you don't
483 use binmode() on these systems, C<\cM\cJ> sequences on disk will be
484 converted to C<\n> on input, and any C<\n> in your program will be
485 converted back to C<\cM\cJ> on output. This is what you want for text
486 files, but it can be disastrous for binary files.
488 Another consequence of using binmode() (on some systems) is that
489 special end-of-file markers will be seen as part of the data stream.
490 For systems from the Microsoft family this means that if your binary
491 data contains C<\cZ>, the I/O subsystem will regard it as the end of
492 the file, unless you use binmode().
494 binmode() is not only important for readline() and print() operations,
495 but also when using read(), seek(), sysread(), syswrite() and tell()
496 (see L<perlport> for more details). See the C<$/> and C<$\> variables
497 in L<perlvar> for how to manually set your input and output
498 line-termination sequences.
500 =item bless REF,CLASSNAME
504 This function tells the thingy referenced by REF that it is now an object
505 in the CLASSNAME package. If CLASSNAME is omitted, the current package
506 is used. Because a C<bless> is often the last thing in a constructor,
507 it returns the reference for convenience. Always use the two-argument
508 version if the function doing the blessing might be inherited by a
509 derived class. See L<perltoot> and L<perlobj> for more about the blessing
510 (and blessings) of objects.
512 Consider always blessing objects in CLASSNAMEs that are mixed case.
513 Namespaces with all lowercase names are considered reserved for
514 Perl pragmata. Builtin types have all uppercase names, so to prevent
515 confusion, you may wish to avoid such package names as well. Make sure
516 that CLASSNAME is a true value.
518 See L<perlmod/"Perl Modules">.
524 Returns the context of the current subroutine call. In scalar context,
525 returns the caller's package name if there is a caller, that is, if
526 we're in a subroutine or C<eval> or C<require>, and the undefined value
527 otherwise. In list context, returns
529 ($package, $filename, $line) = caller;
531 With EXPR, it returns some extra information that the debugger uses to
532 print a stack trace. The value of EXPR indicates how many call frames
533 to go back before the current one.
535 ($package, $filename, $line, $subroutine, $hasargs,
536 $wantarray, $evaltext, $is_require, $hints, $bitmask) = caller($i);
538 Here $subroutine may be C<(eval)> if the frame is not a subroutine
539 call, but an C<eval>. In such a case additional elements $evaltext and
540 C<$is_require> are set: C<$is_require> is true if the frame is created by a
541 C<require> or C<use> statement, $evaltext contains the text of the
542 C<eval EXPR> statement. In particular, for an C<eval BLOCK> statement,
543 $filename is C<(eval)>, but $evaltext is undefined. (Note also that
544 each C<use> statement creates a C<require> frame inside an C<eval EXPR>)
545 frame. C<$hasargs> is true if a new instance of C<@_> was set up for the
546 frame. C<$hints> and C<$bitmask> contain pragmatic hints that the caller
547 was compiled with. The C<$hints> and C<$bitmask> values are subject to
548 change between versions of Perl, and are not meant for external use.
550 Furthermore, when called from within the DB package, caller returns more
551 detailed information: it sets the list variable C<@DB::args> to be the
552 arguments with which the subroutine was invoked.
554 Be aware that the optimizer might have optimized call frames away before
555 C<caller> had a chance to get the information. That means that C<caller(N)>
556 might not return information about the call frame you expect it do, for
557 C<< N > 1 >>. In particular, C<@DB::args> might have information from the
558 previous time C<caller> was called.
562 Changes the working directory to EXPR, if possible. If EXPR is omitted,
563 changes to the directory specified by C<$ENV{HOME}>, if set; if not,
564 changes to the directory specified by C<$ENV{LOGDIR}>. If neither is
565 set, C<chdir> does nothing. It returns true upon success, false
566 otherwise. See the example under C<die>.
570 Changes the permissions of a list of files. The first element of the
571 list must be the numerical mode, which should probably be an octal
572 number, and which definitely should I<not> a string of octal digits:
573 C<0644> is okay, C<'0644'> is not. Returns the number of files
574 successfully changed. See also L</oct>, if all you have is a string.
576 $cnt = chmod 0755, 'foo', 'bar';
577 chmod 0755, @executables;
578 $mode = '0644'; chmod $mode, 'foo'; # !!! sets mode to
580 $mode = '0644'; chmod oct($mode), 'foo'; # this is better
581 $mode = 0644; chmod $mode, 'foo'; # this is best
583 You can also import the symbolic C<S_I*> constants from the Fcntl
588 chmod S_IRWXU|S_IRGRP|S_IXGRP|S_IROTH|S_IXOTH, @executables;
589 # This is identical to the chmod 0755 of the above example.
597 This safer version of L</chop> removes any trailing string
598 that corresponds to the current value of C<$/> (also known as
599 $INPUT_RECORD_SEPARATOR in the C<English> module). It returns the total
600 number of characters removed from all its arguments. It's often used to
601 remove the newline from the end of an input record when you're worried
602 that the final record may be missing its newline. When in paragraph
603 mode (C<$/ = "">), it removes all trailing newlines from the string.
604 When in slurp mode (C<$/ = undef>) or fixed-length record mode (C<$/> is
605 a reference to an integer or the like, see L<perlvar>) chomp() won't
607 If VARIABLE is omitted, it chomps C<$_>. Example:
610 chomp; # avoid \n on last field
615 If VARIABLE is a hash, it chomps the hash's values, but not its keys.
617 You can actually chomp anything that's an lvalue, including an assignment:
620 chomp($answer = <STDIN>);
622 If you chomp a list, each element is chomped, and the total number of
623 characters removed is returned.
631 Chops off the last character of a string and returns the character
632 chopped. It is much more efficient than C<s/.$//s> because it neither
633 scans nor copies the string. If VARIABLE is omitted, chops C<$_>.
634 If VARIABLE is a hash, it chops the hash's values, but not its keys.
636 You can actually chop anything that's an lvalue, including an assignment.
638 If you chop a list, each element is chopped. Only the value of the
639 last C<chop> is returned.
641 Note that C<chop> returns the last character. To return all but the last
642 character, use C<substr($string, 0, -1)>.
646 Changes the owner (and group) of a list of files. The first two
647 elements of the list must be the I<numeric> uid and gid, in that
648 order. A value of -1 in either position is interpreted by most
649 systems to leave that value unchanged. Returns the number of files
650 successfully changed.
652 $cnt = chown $uid, $gid, 'foo', 'bar';
653 chown $uid, $gid, @filenames;
655 Here's an example that looks up nonnumeric uids in the passwd file:
658 chomp($user = <STDIN>);
660 chomp($pattern = <STDIN>);
662 ($login,$pass,$uid,$gid) = getpwnam($user)
663 or die "$user not in passwd file";
665 @ary = glob($pattern); # expand filenames
666 chown $uid, $gid, @ary;
668 On most systems, you are not allowed to change the ownership of the
669 file unless you're the superuser, although you should be able to change
670 the group to any of your secondary groups. On insecure systems, these
671 restrictions may be relaxed, but this is not a portable assumption.
672 On POSIX systems, you can detect this condition this way:
674 use POSIX qw(sysconf _PC_CHOWN_RESTRICTED);
675 $can_chown_giveaway = not sysconf(_PC_CHOWN_RESTRICTED);
681 Returns the character represented by that NUMBER in the character set.
682 For example, C<chr(65)> is C<"A"> in either ASCII or Unicode, and
683 chr(0x263a) is a Unicode smiley face. Within the scope of C<use utf8>,
684 characters higher than 127 are encoded in Unicode; if you don't want
685 this, temporarily C<use bytes> or use C<pack("C*",...)>
687 For the reverse, use L</ord>.
688 See L<utf8> for more about Unicode.
690 If NUMBER is omitted, uses C<$_>.
692 =item chroot FILENAME
696 This function works like the system call by the same name: it makes the
697 named directory the new root directory for all further pathnames that
698 begin with a C</> by your process and all its children. (It doesn't
699 change your current working directory, which is unaffected.) For security
700 reasons, this call is restricted to the superuser. If FILENAME is
701 omitted, does a C<chroot> to C<$_>.
703 =item close FILEHANDLE
707 Closes the file or pipe associated with the file handle, returning true
708 only if stdio successfully flushes buffers and closes the system file
709 descriptor. Closes the currently selected filehandle if the argument
712 You don't have to close FILEHANDLE if you are immediately going to do
713 another C<open> on it, because C<open> will close it for you. (See
714 C<open>.) However, an explicit C<close> on an input file resets the line
715 counter (C<$.>), while the implicit close done by C<open> does not.
717 If the file handle came from a piped open C<close> will additionally
718 return false if one of the other system calls involved fails or if the
719 program exits with non-zero status. (If the only problem was that the
720 program exited non-zero C<$!> will be set to C<0>.) Closing a pipe
721 also waits for the process executing on the pipe to complete, in case you
722 want to look at the output of the pipe afterwards, and
723 implicitly puts the exit status value of that command into C<$?>.
725 Prematurely closing the read end of a pipe (i.e. before the process
726 writing to it at the other end has closed it) will result in a
727 SIGPIPE being delivered to the writer. If the other end can't
728 handle that, be sure to read all the data before closing the pipe.
732 open(OUTPUT, '|sort >foo') # pipe to sort
733 or die "Can't start sort: $!";
734 #... # print stuff to output
735 close OUTPUT # wait for sort to finish
736 or warn $! ? "Error closing sort pipe: $!"
737 : "Exit status $? from sort";
738 open(INPUT, 'foo') # get sort's results
739 or die "Can't open 'foo' for input: $!";
741 FILEHANDLE may be an expression whose value can be used as an indirect
742 filehandle, usually the real filehandle name.
744 =item closedir DIRHANDLE
746 Closes a directory opened by C<opendir> and returns the success of that
749 DIRHANDLE may be an expression whose value can be used as an indirect
750 dirhandle, usually the real dirhandle name.
752 =item connect SOCKET,NAME
754 Attempts to connect to a remote socket, just as the connect system call
755 does. Returns true if it succeeded, false otherwise. NAME should be a
756 packed address of the appropriate type for the socket. See the examples in
757 L<perlipc/"Sockets: Client/Server Communication">.
761 Actually a flow control statement rather than a function. If there is a
762 C<continue> BLOCK attached to a BLOCK (typically in a C<while> or
763 C<foreach>), it is always executed just before the conditional is about to
764 be evaluated again, just like the third part of a C<for> loop in C. Thus
765 it can be used to increment a loop variable, even when the loop has been
766 continued via the C<next> statement (which is similar to the C C<continue>
769 C<last>, C<next>, or C<redo> may appear within a C<continue>
770 block. C<last> and C<redo> will behave as if they had been executed within
771 the main block. So will C<next>, but since it will execute a C<continue>
772 block, it may be more entertaining.
775 ### redo always comes here
778 ### next always comes here
780 # then back the top to re-check EXPR
782 ### last always comes here
784 Omitting the C<continue> section is semantically equivalent to using an
785 empty one, logically enough. In that case, C<next> goes directly back
786 to check the condition at the top of the loop.
792 Returns the cosine of EXPR (expressed in radians). If EXPR is omitted,
793 takes cosine of C<$_>.
795 For the inverse cosine operation, you may use the C<Math::Trig::acos()>
796 function, or use this relation:
798 sub acos { atan2( sqrt(1 - $_[0] * $_[0]), $_[0] ) }
800 =item crypt PLAINTEXT,SALT
802 Encrypts a string exactly like the crypt(3) function in the C library
803 (assuming that you actually have a version there that has not been
804 extirpated as a potential munition). This can prove useful for checking
805 the password file for lousy passwords, amongst other things. Only the
806 guys wearing white hats should do this.
808 Note that C<crypt> is intended to be a one-way function, much like breaking
809 eggs to make an omelette. There is no (known) corresponding decrypt
810 function. As a result, this function isn't all that useful for
811 cryptography. (For that, see your nearby CPAN mirror.)
813 When verifying an existing encrypted string you should use the encrypted
814 text as the salt (like C<crypt($plain, $crypted) eq $crypted>). This
815 allows your code to work with the standard C<crypt> and with more
816 exotic implementations. When choosing a new salt create a random two
817 character string whose characters come from the set C<[./0-9A-Za-z]>
818 (like C<join '', ('.', '/', 0..9, 'A'..'Z', 'a'..'z')[rand 64, rand 64]>).
820 Here's an example that makes sure that whoever runs this program knows
823 $pwd = (getpwuid($<))[1];
827 chomp($word = <STDIN>);
831 if (crypt($word, $pwd) ne $pwd) {
837 Of course, typing in your own password to whoever asks you
840 The L<crypt> function is unsuitable for encrypting large quantities
841 of data, not least of all because you can't get the information
842 back. Look at the F<by-module/Crypt> and F<by-module/PGP> directories
843 on your favorite CPAN mirror for a slew of potentially useful
848 [This function has been largely superseded by the C<untie> function.]
850 Breaks the binding between a DBM file and a hash.
852 =item dbmopen HASH,DBNAME,MASK
854 [This function has been largely superseded by the C<tie> function.]
856 This binds a dbm(3), ndbm(3), sdbm(3), gdbm(3), or Berkeley DB file to a
857 hash. HASH is the name of the hash. (Unlike normal C<open>, the first
858 argument is I<not> a filehandle, even though it looks like one). DBNAME
859 is the name of the database (without the F<.dir> or F<.pag> extension if
860 any). If the database does not exist, it is created with protection
861 specified by MASK (as modified by the C<umask>). If your system supports
862 only the older DBM functions, you may perform only one C<dbmopen> in your
863 program. In older versions of Perl, if your system had neither DBM nor
864 ndbm, calling C<dbmopen> produced a fatal error; it now falls back to
867 If you don't have write access to the DBM file, you can only read hash
868 variables, not set them. If you want to test whether you can write,
869 either use file tests or try setting a dummy hash entry inside an C<eval>,
870 which will trap the error.
872 Note that functions such as C<keys> and C<values> may return huge lists
873 when used on large DBM files. You may prefer to use the C<each>
874 function to iterate over large DBM files. Example:
876 # print out history file offsets
877 dbmopen(%HIST,'/usr/lib/news/history',0666);
878 while (($key,$val) = each %HIST) {
879 print $key, ' = ', unpack('L',$val), "\n";
883 See also L<AnyDBM_File> for a more general description of the pros and
884 cons of the various dbm approaches, as well as L<DB_File> for a particularly
887 You can control which DBM library you use by loading that library
888 before you call dbmopen():
891 dbmopen(%NS_Hist, "$ENV{HOME}/.netscape/history.db")
892 or die "Can't open netscape history file: $!";
898 Returns a Boolean value telling whether EXPR has a value other than
899 the undefined value C<undef>. If EXPR is not present, C<$_> will be
902 Many operations return C<undef> to indicate failure, end of file,
903 system error, uninitialized variable, and other exceptional
904 conditions. This function allows you to distinguish C<undef> from
905 other values. (A simple Boolean test will not distinguish among
906 C<undef>, zero, the empty string, and C<"0">, which are all equally
907 false.) Note that since C<undef> is a valid scalar, its presence
908 doesn't I<necessarily> indicate an exceptional condition: C<pop>
909 returns C<undef> when its argument is an empty array, I<or> when the
910 element to return happens to be C<undef>.
912 You may also use C<defined(&func)> to check whether subroutine C<&func>
913 has ever been defined. The return value is unaffected by any forward
914 declarations of C<&foo>. Note that a subroutine which is not defined
915 may still be callable: its package may have an C<AUTOLOAD> method that
916 makes it spring into existence the first time that it is called -- see
919 Use of C<defined> on aggregates (hashes and arrays) is deprecated. It
920 used to report whether memory for that aggregate has ever been
921 allocated. This behavior may disappear in future versions of Perl.
922 You should instead use a simple test for size:
924 if (@an_array) { print "has array elements\n" }
925 if (%a_hash) { print "has hash members\n" }
927 When used on a hash element, it tells you whether the value is defined,
928 not whether the key exists in the hash. Use L</exists> for the latter
933 print if defined $switch{'D'};
934 print "$val\n" while defined($val = pop(@ary));
935 die "Can't readlink $sym: $!"
936 unless defined($value = readlink $sym);
937 sub foo { defined &$bar ? &$bar(@_) : die "No bar"; }
938 $debugging = 0 unless defined $debugging;
940 Note: Many folks tend to overuse C<defined>, and then are surprised to
941 discover that the number C<0> and C<""> (the zero-length string) are, in fact,
942 defined values. For example, if you say
946 The pattern match succeeds, and C<$1> is defined, despite the fact that it
947 matched "nothing". But it didn't really match nothing--rather, it
948 matched something that happened to be zero characters long. This is all
949 very above-board and honest. When a function returns an undefined value,
950 it's an admission that it couldn't give you an honest answer. So you
951 should use C<defined> only when you're questioning the integrity of what
952 you're trying to do. At other times, a simple comparison to C<0> or C<""> is
955 See also L</undef>, L</exists>, L</ref>.
959 Given an expression that specifies a hash element, array element, hash slice,
960 or array slice, deletes the specified element(s) from the hash or array.
961 In the case of an array, if the array elements happen to be at the end,
962 the size of the array will shrink to the highest element that tests
963 true for exists() (or 0 if no such element exists).
965 Returns each element so deleted or the undefined value if there was no such
966 element. Deleting from C<$ENV{}> modifies the environment. Deleting from
967 a hash tied to a DBM file deletes the entry from the DBM file. Deleting
968 from a C<tie>d hash or array may not necessarily return anything.
970 Deleting an array element effectively returns that position of the array
971 to its initial, uninitialized state. Subsequently testing for the same
972 element with exists() will return false. Note that deleting array
973 elements in the middle of an array will not shift the index of the ones
974 after them down--use splice() for that. See L</exists>.
976 The following (inefficiently) deletes all the values of %HASH and @ARRAY:
978 foreach $key (keys %HASH) {
982 foreach $index (0 .. $#ARRAY) {
983 delete $ARRAY[$index];
988 delete @HASH{keys %HASH};
990 delete @ARRAY[0 .. $#ARRAY];
992 But both of these are slower than just assigning the empty list
993 or undefining %HASH or @ARRAY:
995 %HASH = (); # completely empty %HASH
996 undef %HASH; # forget %HASH ever existed
998 @ARRAY = (); # completely empty @ARRAY
999 undef @ARRAY; # forget @ARRAY ever existed
1001 Note that the EXPR can be arbitrarily complicated as long as the final
1002 operation is a hash element, array element, hash slice, or array slice
1005 delete $ref->[$x][$y]{$key};
1006 delete @{$ref->[$x][$y]}{$key1, $key2, @morekeys};
1008 delete $ref->[$x][$y][$index];
1009 delete @{$ref->[$x][$y]}[$index1, $index2, @moreindices];
1013 Outside an C<eval>, prints the value of LIST to C<STDERR> and
1014 exits with the current value of C<$!> (errno). If C<$!> is C<0>,
1015 exits with the value of C<<< ($? >> 8) >>> (backtick `command`
1016 status). If C<<< ($? >> 8) >>> is C<0>, exits with C<255>. Inside
1017 an C<eval(),> the error message is stuffed into C<$@> and the
1018 C<eval> is terminated with the undefined value. This makes
1019 C<die> the way to raise an exception.
1021 Equivalent examples:
1023 die "Can't cd to spool: $!\n" unless chdir '/usr/spool/news';
1024 chdir '/usr/spool/news' or die "Can't cd to spool: $!\n"
1026 If the value of EXPR does not end in a newline, the current script line
1027 number and input line number (if any) are also printed, and a newline
1028 is supplied. Note that the "input line number" (also known as "chunk")
1029 is subject to whatever notion of "line" happens to be currently in
1030 effect, and is also available as the special variable C<$.>.
1031 See L<perlvar/"$/"> and L<perlvar/"$.">.
1033 Hint: sometimes appending C<", stopped"> to your message
1034 will cause it to make better sense when the string C<"at foo line 123"> is
1035 appended. Suppose you are running script "canasta".
1037 die "/etc/games is no good";
1038 die "/etc/games is no good, stopped";
1040 produce, respectively
1042 /etc/games is no good at canasta line 123.
1043 /etc/games is no good, stopped at canasta line 123.
1045 See also exit(), warn(), and the Carp module.
1047 If LIST is empty and C<$@> already contains a value (typically from a
1048 previous eval) that value is reused after appending C<"\t...propagated">.
1049 This is useful for propagating exceptions:
1052 die unless $@ =~ /Expected exception/;
1054 If C<$@> is empty then the string C<"Died"> is used.
1056 die() can also be called with a reference argument. If this happens to be
1057 trapped within an eval(), $@ contains the reference. This behavior permits
1058 a more elaborate exception handling implementation using objects that
1059 maintain arbitrary state about the nature of the exception. Such a scheme
1060 is sometimes preferable to matching particular string values of $@ using
1061 regular expressions. Here's an example:
1063 eval { ... ; die Some::Module::Exception->new( FOO => "bar" ) };
1065 if (ref($@) && UNIVERSAL::isa($@,"Some::Module::Exception")) {
1066 # handle Some::Module::Exception
1069 # handle all other possible exceptions
1073 Because perl will stringify uncaught exception messages before displaying
1074 them, you may want to overload stringification operations on such custom
1075 exception objects. See L<overload> for details about that.
1077 You can arrange for a callback to be run just before the C<die>
1078 does its deed, by setting the C<$SIG{__DIE__}> hook. The associated
1079 handler will be called with the error text and can change the error
1080 message, if it sees fit, by calling C<die> again. See
1081 L<perlvar/$SIG{expr}> for details on setting C<%SIG> entries, and
1082 L<"eval BLOCK"> for some examples. Although this feature was meant
1083 to be run only right before your program was to exit, this is not
1084 currently the case--the C<$SIG{__DIE__}> hook is currently called
1085 even inside eval()ed blocks/strings! If one wants the hook to do
1086 nothing in such situations, put
1090 as the first line of the handler (see L<perlvar/$^S>). Because
1091 this promotes strange action at a distance, this counterintuitive
1092 behavior may be fixed in a future release.
1096 Not really a function. Returns the value of the last command in the
1097 sequence of commands indicated by BLOCK. When modified by a loop
1098 modifier, executes the BLOCK once before testing the loop condition.
1099 (On other statements the loop modifiers test the conditional first.)
1101 C<do BLOCK> does I<not> count as a loop, so the loop control statements
1102 C<next>, C<last>, or C<redo> cannot be used to leave or restart the block.
1103 See L<perlsyn> for alternative strategies.
1105 =item do SUBROUTINE(LIST)
1107 A deprecated form of subroutine call. See L<perlsub>.
1111 Uses the value of EXPR as a filename and executes the contents of the
1112 file as a Perl script. Its primary use is to include subroutines
1113 from a Perl subroutine library.
1119 scalar eval `cat stat.pl`;
1121 except that it's more efficient and concise, keeps track of the current
1122 filename for error messages, searches the @INC libraries, and updates
1123 C<%INC> if the file is found. See L<perlvar/Predefined Names> for these
1124 variables. It also differs in that code evaluated with C<do FILENAME>
1125 cannot see lexicals in the enclosing scope; C<eval STRING> does. It's the
1126 same, however, in that it does reparse the file every time you call it,
1127 so you probably don't want to do this inside a loop.
1129 If C<do> cannot read the file, it returns undef and sets C<$!> to the
1130 error. If C<do> can read the file but cannot compile it, it
1131 returns undef and sets an error message in C<$@>. If the file is
1132 successfully compiled, C<do> returns the value of the last expression
1135 Note that inclusion of library modules is better done with the
1136 C<use> and C<require> operators, which also do automatic error checking
1137 and raise an exception if there's a problem.
1139 You might like to use C<do> to read in a program configuration
1140 file. Manual error checking can be done this way:
1142 # read in config files: system first, then user
1143 for $file ("/share/prog/defaults.rc",
1144 "$ENV{HOME}/.someprogrc")
1146 unless ($return = do $file) {
1147 warn "couldn't parse $file: $@" if $@;
1148 warn "couldn't do $file: $!" unless defined $return;
1149 warn "couldn't run $file" unless $return;
1157 This function causes an immediate core dump. See also the B<-u>
1158 command-line switch in L<perlrun>, which does the same thing.
1159 Primarily this is so that you can use the B<undump> program (not
1160 supplied) to turn your core dump into an executable binary after
1161 having initialized all your variables at the beginning of the
1162 program. When the new binary is executed it will begin by executing
1163 a C<goto LABEL> (with all the restrictions that C<goto> suffers).
1164 Think of it as a goto with an intervening core dump and reincarnation.
1165 If C<LABEL> is omitted, restarts the program from the top.
1167 B<WARNING>: Any files opened at the time of the dump will I<not>
1168 be open any more when the program is reincarnated, with possible
1169 resulting confusion on the part of Perl.
1171 This function is now largely obsolete, partly because it's very
1172 hard to convert a core file into an executable, and because the
1173 real compiler backends for generating portable bytecode and compilable
1174 C code have superseded it.
1176 If you're looking to use L<dump> to speed up your program, consider
1177 generating bytecode or native C code as described in L<perlcc>. If
1178 you're just trying to accelerate a CGI script, consider using the
1179 C<mod_perl> extension to B<Apache>, or the CPAN module, Fast::CGI.
1180 You might also consider autoloading or selfloading, which at least
1181 make your program I<appear> to run faster.
1185 When called in list context, returns a 2-element list consisting of the
1186 key and value for the next element of a hash, so that you can iterate over
1187 it. When called in scalar context, returns only the key for the next
1188 element in the hash.
1190 Entries are returned in an apparently random order. The actual random
1191 order is subject to change in future versions of perl, but it is guaranteed
1192 to be in the same order as either the C<keys> or C<values> function
1193 would produce on the same (unmodified) hash.
1195 When the hash is entirely read, a null array is returned in list context
1196 (which when assigned produces a false (C<0>) value), and C<undef> in
1197 scalar context. The next call to C<each> after that will start iterating
1198 again. There is a single iterator for each hash, shared by all C<each>,
1199 C<keys>, and C<values> function calls in the program; it can be reset by
1200 reading all the elements from the hash, or by evaluating C<keys HASH> or
1201 C<values HASH>. If you add or delete elements of a hash while you're
1202 iterating over it, you may get entries skipped or duplicated, so
1203 don't. Exception: It is always safe to delete the item most recently
1204 returned by C<each()>, which means that the following code will work:
1206 while (($key, $value) = each %hash) {
1208 delete $hash{$key}; # This is safe
1211 The following prints out your environment like the printenv(1) program,
1212 only in a different order:
1214 while (($key,$value) = each %ENV) {
1215 print "$key=$value\n";
1218 See also C<keys>, C<values> and C<sort>.
1220 =item eof FILEHANDLE
1226 Returns 1 if the next read on FILEHANDLE will return end of file, or if
1227 FILEHANDLE is not open. FILEHANDLE may be an expression whose value
1228 gives the real filehandle. (Note that this function actually
1229 reads a character and then C<ungetc>s it, so isn't very useful in an
1230 interactive context.) Do not read from a terminal file (or call
1231 C<eof(FILEHANDLE)> on it) after end-of-file is reached. File types such
1232 as terminals may lose the end-of-file condition if you do.
1234 An C<eof> without an argument uses the last file read. Using C<eof()>
1235 with empty parentheses is very different. It refers to the pseudo file
1236 formed from the files listed on the command line and accessed via the
1237 C<< <> >> operator. Since C<< <> >> isn't explicitly opened,
1238 as a normal filehandle is, an C<eof()> before C<< <> >> has been
1239 used will cause C<@ARGV> to be examined to determine if input is
1242 In a C<< while (<>) >> loop, C<eof> or C<eof(ARGV)> can be used to
1243 detect the end of each file, C<eof()> will only detect the end of the
1244 last file. Examples:
1246 # reset line numbering on each input file
1248 next if /^\s*#/; # skip comments
1251 close ARGV if eof; # Not eof()!
1254 # insert dashes just before last line of last file
1256 if (eof()) { # check for end of current file
1257 print "--------------\n";
1258 close(ARGV); # close or last; is needed if we
1259 # are reading from the terminal
1264 Practical hint: you almost never need to use C<eof> in Perl, because the
1265 input operators typically return C<undef> when they run out of data, or if
1272 In the first form, the return value of EXPR is parsed and executed as if it
1273 were a little Perl program. The value of the expression (which is itself
1274 determined within scalar context) is first parsed, and if there weren't any
1275 errors, executed in the lexical context of the current Perl program, so
1276 that any variable settings or subroutine and format definitions remain
1277 afterwards. Note that the value is parsed every time the eval executes.
1278 If EXPR is omitted, evaluates C<$_>. This form is typically used to
1279 delay parsing and subsequent execution of the text of EXPR until run time.
1281 In the second form, the code within the BLOCK is parsed only once--at the
1282 same time the code surrounding the eval itself was parsed--and executed
1283 within the context of the current Perl program. This form is typically
1284 used to trap exceptions more efficiently than the first (see below), while
1285 also providing the benefit of checking the code within BLOCK at compile
1288 The final semicolon, if any, may be omitted from the value of EXPR or within
1291 In both forms, the value returned is the value of the last expression
1292 evaluated inside the mini-program; a return statement may be also used, just
1293 as with subroutines. The expression providing the return value is evaluated
1294 in void, scalar, or list context, depending on the context of the eval itself.
1295 See L</wantarray> for more on how the evaluation context can be determined.
1297 If there is a syntax error or runtime error, or a C<die> statement is
1298 executed, an undefined value is returned by C<eval>, and C<$@> is set to the
1299 error message. If there was no error, C<$@> is guaranteed to be a null
1300 string. Beware that using C<eval> neither silences perl from printing
1301 warnings to STDERR, nor does it stuff the text of warning messages into C<$@>.
1302 To do either of those, you have to use the C<$SIG{__WARN__}> facility. See
1303 L</warn> and L<perlvar>.
1305 Note that, because C<eval> traps otherwise-fatal errors, it is useful for
1306 determining whether a particular feature (such as C<socket> or C<symlink>)
1307 is implemented. It is also Perl's exception trapping mechanism, where
1308 the die operator is used to raise exceptions.
1310 If the code to be executed doesn't vary, you may use the eval-BLOCK
1311 form to trap run-time errors without incurring the penalty of
1312 recompiling each time. The error, if any, is still returned in C<$@>.
1315 # make divide-by-zero nonfatal
1316 eval { $answer = $a / $b; }; warn $@ if $@;
1318 # same thing, but less efficient
1319 eval '$answer = $a / $b'; warn $@ if $@;
1321 # a compile-time error
1322 eval { $answer = }; # WRONG
1325 eval '$answer ='; # sets $@
1327 Due to the current arguably broken state of C<__DIE__> hooks, when using
1328 the C<eval{}> form as an exception trap in libraries, you may wish not
1329 to trigger any C<__DIE__> hooks that user code may have installed.
1330 You can use the C<local $SIG{__DIE__}> construct for this purpose,
1331 as shown in this example:
1333 # a very private exception trap for divide-by-zero
1334 eval { local $SIG{'__DIE__'}; $answer = $a / $b; };
1337 This is especially significant, given that C<__DIE__> hooks can call
1338 C<die> again, which has the effect of changing their error messages:
1340 # __DIE__ hooks may modify error messages
1342 local $SIG{'__DIE__'} =
1343 sub { (my $x = $_[0]) =~ s/foo/bar/g; die $x };
1344 eval { die "foo lives here" };
1345 print $@ if $@; # prints "bar lives here"
1348 Because this promotes action at a distance, this counterintuitive behavior
1349 may be fixed in a future release.
1351 With an C<eval>, you should be especially careful to remember what's
1352 being looked at when:
1358 eval { $x }; # CASE 4
1360 eval "\$$x++"; # CASE 5
1363 Cases 1 and 2 above behave identically: they run the code contained in
1364 the variable $x. (Although case 2 has misleading double quotes making
1365 the reader wonder what else might be happening (nothing is).) Cases 3
1366 and 4 likewise behave in the same way: they run the code C<'$x'>, which
1367 does nothing but return the value of $x. (Case 4 is preferred for
1368 purely visual reasons, but it also has the advantage of compiling at
1369 compile-time instead of at run-time.) Case 5 is a place where
1370 normally you I<would> like to use double quotes, except that in this
1371 particular situation, you can just use symbolic references instead, as
1374 C<eval BLOCK> does I<not> count as a loop, so the loop control statements
1375 C<next>, C<last>, or C<redo> cannot be used to leave or restart the block.
1379 =item exec PROGRAM LIST
1381 The C<exec> function executes a system command I<and never returns>--
1382 use C<system> instead of C<exec> if you want it to return. It fails and
1383 returns false only if the command does not exist I<and> it is executed
1384 directly instead of via your system's command shell (see below).
1386 Since it's a common mistake to use C<exec> instead of C<system>, Perl
1387 warns you if there is a following statement which isn't C<die>, C<warn>,
1388 or C<exit> (if C<-w> is set - but you always do that). If you
1389 I<really> want to follow an C<exec> with some other statement, you
1390 can use one of these styles to avoid the warning:
1392 exec ('foo') or print STDERR "couldn't exec foo: $!";
1393 { exec ('foo') }; print STDERR "couldn't exec foo: $!";
1395 If there is more than one argument in LIST, or if LIST is an array
1396 with more than one value, calls execvp(3) with the arguments in LIST.
1397 If there is only one scalar argument or an array with one element in it,
1398 the argument is checked for shell metacharacters, and if there are any,
1399 the entire argument is passed to the system's command shell for parsing
1400 (this is C</bin/sh -c> on Unix platforms, but varies on other platforms).
1401 If there are no shell metacharacters in the argument, it is split into
1402 words and passed directly to C<execvp>, which is more efficient.
1405 exec '/bin/echo', 'Your arguments are: ', @ARGV;
1406 exec "sort $outfile | uniq";
1408 If you don't really want to execute the first argument, but want to lie
1409 to the program you are executing about its own name, you can specify
1410 the program you actually want to run as an "indirect object" (without a
1411 comma) in front of the LIST. (This always forces interpretation of the
1412 LIST as a multivalued list, even if there is only a single scalar in
1415 $shell = '/bin/csh';
1416 exec $shell '-sh'; # pretend it's a login shell
1420 exec {'/bin/csh'} '-sh'; # pretend it's a login shell
1422 When the arguments get executed via the system shell, results will
1423 be subject to its quirks and capabilities. See L<perlop/"`STRING`">
1426 Using an indirect object with C<exec> or C<system> is also more
1427 secure. This usage (which also works fine with system()) forces
1428 interpretation of the arguments as a multivalued list, even if the
1429 list had just one argument. That way you're safe from the shell
1430 expanding wildcards or splitting up words with whitespace in them.
1432 @args = ( "echo surprise" );
1434 exec @args; # subject to shell escapes
1436 exec { $args[0] } @args; # safe even with one-arg list
1438 The first version, the one without the indirect object, ran the I<echo>
1439 program, passing it C<"surprise"> an argument. The second version
1440 didn't--it tried to run a program literally called I<"echo surprise">,
1441 didn't find it, and set C<$?> to a non-zero value indicating failure.
1443 Beginning with v5.6.0, Perl will attempt to flush all files opened for
1444 output before the exec, but this may not be supported on some platforms
1445 (see L<perlport>). To be safe, you may need to set C<$|> ($AUTOFLUSH
1446 in English) or call the C<autoflush()> method of C<IO::Handle> on any
1447 open handles in order to avoid lost output.
1449 Note that C<exec> will not call your C<END> blocks, nor will it call
1450 any C<DESTROY> methods in your objects.
1454 Given an expression that specifies a hash element or array element,
1455 returns true if the specified element in the hash or array has ever
1456 been initialized, even if the corresponding value is undefined. The
1457 element is not autovivified if it doesn't exist.
1459 print "Exists\n" if exists $hash{$key};
1460 print "Defined\n" if defined $hash{$key};
1461 print "True\n" if $hash{$key};
1463 print "Exists\n" if exists $array[$index];
1464 print "Defined\n" if defined $array[$index];
1465 print "True\n" if $array[$index];
1467 A hash or array element can be true only if it's defined, and defined if
1468 it exists, but the reverse doesn't necessarily hold true.
1470 Given an expression that specifies the name of a subroutine,
1471 returns true if the specified subroutine has ever been declared, even
1472 if it is undefined. Mentioning a subroutine name for exists or defined
1473 does not count as declaring it. Note that a subroutine which does not
1474 exist may still be callable: its package may have an C<AUTOLOAD>
1475 method that makes it spring into existence the first time that it is
1476 called -- see L<perlsub>.
1478 print "Exists\n" if exists &subroutine;
1479 print "Defined\n" if defined &subroutine;
1481 Note that the EXPR can be arbitrarily complicated as long as the final
1482 operation is a hash or array key lookup or subroutine name:
1484 if (exists $ref->{A}->{B}->{$key}) { }
1485 if (exists $hash{A}{B}{$key}) { }
1487 if (exists $ref->{A}->{B}->[$ix]) { }
1488 if (exists $hash{A}{B}[$ix]) { }
1490 if (exists &{$ref->{A}{B}{$key}}) { }
1492 Although the deepest nested array or hash will not spring into existence
1493 just because its existence was tested, any intervening ones will.
1494 Thus C<< $ref->{"A"} >> and C<< $ref->{"A"}->{"B"} >> will spring
1495 into existence due to the existence test for the $key element above.
1496 This happens anywhere the arrow operator is used, including even:
1499 if (exists $ref->{"Some key"}) { }
1500 print $ref; # prints HASH(0x80d3d5c)
1502 This surprising autovivification in what does not at first--or even
1503 second--glance appear to be an lvalue context may be fixed in a future
1506 See L<perlref/"Pseudo-hashes: Using an array as a hash"> for specifics
1507 on how exists() acts when used on a pseudo-hash.
1509 Use of a subroutine call, rather than a subroutine name, as an argument
1510 to exists() is an error.
1513 exists &sub(); # Error
1517 Evaluates EXPR and exits immediately with that value. Example:
1520 exit 0 if $ans =~ /^[Xx]/;
1522 See also C<die>. If EXPR is omitted, exits with C<0> status. The only
1523 universally recognized values for EXPR are C<0> for success and C<1>
1524 for error; other values are subject to interpretation depending on the
1525 environment in which the Perl program is running. For example, exiting
1526 69 (EX_UNAVAILABLE) from a I<sendmail> incoming-mail filter will cause
1527 the mailer to return the item undelivered, but that's not true everywhere.
1529 Don't use C<exit> to abort a subroutine if there's any chance that
1530 someone might want to trap whatever error happened. Use C<die> instead,
1531 which can be trapped by an C<eval>.
1533 The exit() function does not always exit immediately. It calls any
1534 defined C<END> routines first, but these C<END> routines may not
1535 themselves abort the exit. Likewise any object destructors that need to
1536 be called are called before the real exit. If this is a problem, you
1537 can call C<POSIX:_exit($status)> to avoid END and destructor processing.
1538 See L<perlmod> for details.
1544 Returns I<e> (the natural logarithm base) to the power of EXPR.
1545 If EXPR is omitted, gives C<exp($_)>.
1547 =item fcntl FILEHANDLE,FUNCTION,SCALAR
1549 Implements the fcntl(2) function. You'll probably have to say
1553 first to get the correct constant definitions. Argument processing and
1554 value return works just like C<ioctl> below.
1558 fcntl($filehandle, F_GETFL, $packed_return_buffer)
1559 or die "can't fcntl F_GETFL: $!";
1561 You don't have to check for C<defined> on the return from C<fnctl>.
1562 Like C<ioctl>, it maps a C<0> return from the system call into
1563 C<"0 but true"> in Perl. This string is true in boolean context and C<0>
1564 in numeric context. It is also exempt from the normal B<-w> warnings
1565 on improper numeric conversions.
1567 Note that C<fcntl> will produce a fatal error if used on a machine that
1568 doesn't implement fcntl(2). See the Fcntl module or your fcntl(2)
1569 manpage to learn what functions are available on your system.
1571 =item fileno FILEHANDLE
1573 Returns the file descriptor for a filehandle, or undefined if the
1574 filehandle is not open. This is mainly useful for constructing
1575 bitmaps for C<select> and low-level POSIX tty-handling operations.
1576 If FILEHANDLE is an expression, the value is taken as an indirect
1577 filehandle, generally its name.
1579 You can use this to find out whether two handles refer to the
1580 same underlying descriptor:
1582 if (fileno(THIS) == fileno(THAT)) {
1583 print "THIS and THAT are dups\n";
1586 =item flock FILEHANDLE,OPERATION
1588 Calls flock(2), or an emulation of it, on FILEHANDLE. Returns true
1589 for success, false on failure. Produces a fatal error if used on a
1590 machine that doesn't implement flock(2), fcntl(2) locking, or lockf(3).
1591 C<flock> is Perl's portable file locking interface, although it locks
1592 only entire files, not records.
1594 Two potentially non-obvious but traditional C<flock> semantics are
1595 that it waits indefinitely until the lock is granted, and that its locks
1596 B<merely advisory>. Such discretionary locks are more flexible, but offer
1597 fewer guarantees. This means that files locked with C<flock> may be
1598 modified by programs that do not also use C<flock>. See L<perlport>,
1599 your port's specific documentation, or your system-specific local manpages
1600 for details. It's best to assume traditional behavior if you're writing
1601 portable programs. (But if you're not, you should as always feel perfectly
1602 free to write for your own system's idiosyncrasies (sometimes called
1603 "features"). Slavish adherence to portability concerns shouldn't get
1604 in the way of your getting your job done.)
1606 OPERATION is one of LOCK_SH, LOCK_EX, or LOCK_UN, possibly combined with
1607 LOCK_NB. These constants are traditionally valued 1, 2, 8 and 4, but
1608 you can use the symbolic names if you import them from the Fcntl module,
1609 either individually, or as a group using the ':flock' tag. LOCK_SH
1610 requests a shared lock, LOCK_EX requests an exclusive lock, and LOCK_UN
1611 releases a previously requested lock. If LOCK_NB is bitwise-or'ed with
1612 LOCK_SH or LOCK_EX then C<flock> will return immediately rather than blocking
1613 waiting for the lock (check the return status to see if you got it).
1615 To avoid the possibility of miscoordination, Perl now flushes FILEHANDLE
1616 before locking or unlocking it.
1618 Note that the emulation built with lockf(3) doesn't provide shared
1619 locks, and it requires that FILEHANDLE be open with write intent. These
1620 are the semantics that lockf(3) implements. Most if not all systems
1621 implement lockf(3) in terms of fcntl(2) locking, though, so the
1622 differing semantics shouldn't bite too many people.
1624 Note also that some versions of C<flock> cannot lock things over the
1625 network; you would need to use the more system-specific C<fcntl> for
1626 that. If you like you can force Perl to ignore your system's flock(2)
1627 function, and so provide its own fcntl(2)-based emulation, by passing
1628 the switch C<-Ud_flock> to the F<Configure> program when you configure
1631 Here's a mailbox appender for BSD systems.
1633 use Fcntl ':flock'; # import LOCK_* constants
1636 flock(MBOX,LOCK_EX);
1637 # and, in case someone appended
1638 # while we were waiting...
1643 flock(MBOX,LOCK_UN);
1646 open(MBOX, ">>/usr/spool/mail/$ENV{'USER'}")
1647 or die "Can't open mailbox: $!";
1650 print MBOX $msg,"\n\n";
1653 On systems that support a real flock(), locks are inherited across fork()
1654 calls, whereas those that must resort to the more capricious fcntl()
1655 function lose the locks, making it harder to write servers.
1657 See also L<DB_File> for other flock() examples.
1661 Does a fork(2) system call to create a new process running the
1662 same program at the same point. It returns the child pid to the
1663 parent process, C<0> to the child process, or C<undef> if the fork is
1664 unsuccessful. File descriptors (and sometimes locks on those descriptors)
1665 are shared, while everything else is copied. On most systems supporting
1666 fork(), great care has gone into making it extremely efficient (for
1667 example, using copy-on-write technology on data pages), making it the
1668 dominant paradigm for multitasking over the last few decades.
1670 Beginning with v5.6.0, Perl will attempt to flush all files opened for
1671 output before forking the child process, but this may not be supported
1672 on some platforms (see L<perlport>). To be safe, you may need to set
1673 C<$|> ($AUTOFLUSH in English) or call the C<autoflush()> method of
1674 C<IO::Handle> on any open handles in order to avoid duplicate output.
1676 If you C<fork> without ever waiting on your children, you will
1677 accumulate zombies. On some systems, you can avoid this by setting
1678 C<$SIG{CHLD}> to C<"IGNORE">. See also L<perlipc> for more examples of
1679 forking and reaping moribund children.
1681 Note that if your forked child inherits system file descriptors like
1682 STDIN and STDOUT that are actually connected by a pipe or socket, even
1683 if you exit, then the remote server (such as, say, a CGI script or a
1684 backgrounded job launched from a remote shell) won't think you're done.
1685 You should reopen those to F</dev/null> if it's any issue.
1689 Declare a picture format for use by the C<write> function. For
1693 Test: @<<<<<<<< @||||| @>>>>>
1694 $str, $%, '$' . int($num)
1698 $num = $cost/$quantity;
1702 See L<perlform> for many details and examples.
1704 =item formline PICTURE,LIST
1706 This is an internal function used by C<format>s, though you may call it,
1707 too. It formats (see L<perlform>) a list of values according to the
1708 contents of PICTURE, placing the output into the format output
1709 accumulator, C<$^A> (or C<$ACCUMULATOR> in English).
1710 Eventually, when a C<write> is done, the contents of
1711 C<$^A> are written to some filehandle, but you could also read C<$^A>
1712 yourself and then set C<$^A> back to C<"">. Note that a format typically
1713 does one C<formline> per line of form, but the C<formline> function itself
1714 doesn't care how many newlines are embedded in the PICTURE. This means
1715 that the C<~> and C<~~> tokens will treat the entire PICTURE as a single line.
1716 You may therefore need to use multiple formlines to implement a single
1717 record format, just like the format compiler.
1719 Be careful if you put double quotes around the picture, because an C<@>
1720 character may be taken to mean the beginning of an array name.
1721 C<formline> always returns true. See L<perlform> for other examples.
1723 =item getc FILEHANDLE
1727 Returns the next character from the input file attached to FILEHANDLE,
1728 or the undefined value at end of file, or if there was an error.
1729 If FILEHANDLE is omitted, reads from STDIN. This is not particularly
1730 efficient. However, it cannot be used by itself to fetch single
1731 characters without waiting for the user to hit enter. For that, try
1732 something more like:
1735 system "stty cbreak </dev/tty >/dev/tty 2>&1";
1738 system "stty", '-icanon', 'eol', "\001";
1744 system "stty -cbreak </dev/tty >/dev/tty 2>&1";
1747 system "stty", 'icanon', 'eol', '^@'; # ASCII null
1751 Determination of whether $BSD_STYLE should be set
1752 is left as an exercise to the reader.
1754 The C<POSIX::getattr> function can do this more portably on
1755 systems purporting POSIX compliance. See also the C<Term::ReadKey>
1756 module from your nearest CPAN site; details on CPAN can be found on
1761 Implements the C library function of the same name, which on most
1762 systems returns the current login from F</etc/utmp>, if any. If null,
1765 $login = getlogin || getpwuid($<) || "Kilroy";
1767 Do not consider C<getlogin> for authentication: it is not as
1768 secure as C<getpwuid>.
1770 =item getpeername SOCKET
1772 Returns the packed sockaddr address of other end of the SOCKET connection.
1775 $hersockaddr = getpeername(SOCK);
1776 ($port, $iaddr) = sockaddr_in($hersockaddr);
1777 $herhostname = gethostbyaddr($iaddr, AF_INET);
1778 $herstraddr = inet_ntoa($iaddr);
1782 Returns the current process group for the specified PID. Use
1783 a PID of C<0> to get the current process group for the
1784 current process. Will raise an exception if used on a machine that
1785 doesn't implement getpgrp(2). If PID is omitted, returns process
1786 group of current process. Note that the POSIX version of C<getpgrp>
1787 does not accept a PID argument, so only C<PID==0> is truly portable.
1791 Returns the process id of the parent process.
1793 =item getpriority WHICH,WHO
1795 Returns the current priority for a process, a process group, or a user.
1796 (See L<getpriority(2)>.) Will raise a fatal exception if used on a
1797 machine that doesn't implement getpriority(2).
1803 =item gethostbyname NAME
1805 =item getnetbyname NAME
1807 =item getprotobyname NAME
1813 =item getservbyname NAME,PROTO
1815 =item gethostbyaddr ADDR,ADDRTYPE
1817 =item getnetbyaddr ADDR,ADDRTYPE
1819 =item getprotobynumber NUMBER
1821 =item getservbyport PORT,PROTO
1839 =item sethostent STAYOPEN
1841 =item setnetent STAYOPEN
1843 =item setprotoent STAYOPEN
1845 =item setservent STAYOPEN
1859 These routines perform the same functions as their counterparts in the
1860 system library. In list context, the return values from the
1861 various get routines are as follows:
1863 ($name,$passwd,$uid,$gid,
1864 $quota,$comment,$gcos,$dir,$shell,$expire) = getpw*
1865 ($name,$passwd,$gid,$members) = getgr*
1866 ($name,$aliases,$addrtype,$length,@addrs) = gethost*
1867 ($name,$aliases,$addrtype,$net) = getnet*
1868 ($name,$aliases,$proto) = getproto*
1869 ($name,$aliases,$port,$proto) = getserv*
1871 (If the entry doesn't exist you get a null list.)
1873 The exact meaning of the $gcos field varies but it usually contains
1874 the real name of the user (as opposed to the login name) and other
1875 information pertaining to the user. Beware, however, that in many
1876 system users are able to change this information and therefore it
1877 cannot be trusted and therefore the $gcos is tainted (see
1878 L<perlsec>). The $passwd and $shell, user's encrypted password and
1879 login shell, are also tainted, because of the same reason.
1881 In scalar context, you get the name, unless the function was a
1882 lookup by name, in which case you get the other thing, whatever it is.
1883 (If the entry doesn't exist you get the undefined value.) For example:
1885 $uid = getpwnam($name);
1886 $name = getpwuid($num);
1888 $gid = getgrnam($name);
1889 $name = getgrgid($num;
1893 In I<getpw*()> the fields $quota, $comment, and $expire are special
1894 cases in the sense that in many systems they are unsupported. If the
1895 $quota is unsupported, it is an empty scalar. If it is supported, it
1896 usually encodes the disk quota. If the $comment field is unsupported,
1897 it is an empty scalar. If it is supported it usually encodes some
1898 administrative comment about the user. In some systems the $quota
1899 field may be $change or $age, fields that have to do with password
1900 aging. In some systems the $comment field may be $class. The $expire
1901 field, if present, encodes the expiration period of the account or the
1902 password. For the availability and the exact meaning of these fields
1903 in your system, please consult your getpwnam(3) documentation and your
1904 F<pwd.h> file. You can also find out from within Perl what your
1905 $quota and $comment fields mean and whether you have the $expire field
1906 by using the C<Config> module and the values C<d_pwquota>, C<d_pwage>,
1907 C<d_pwchange>, C<d_pwcomment>, and C<d_pwexpire>. Shadow password
1908 files are only supported if your vendor has implemented them in the
1909 intuitive fashion that calling the regular C library routines gets the
1910 shadow versions if you're running under privilege or if there exists
1911 the shadow(3) functions as found in System V ( this includes Solaris
1912 and Linux.) Those systems which implement a proprietary shadow password
1913 facility are unlikely to be supported.
1915 The $members value returned by I<getgr*()> is a space separated list of
1916 the login names of the members of the group.
1918 For the I<gethost*()> functions, if the C<h_errno> variable is supported in
1919 C, it will be returned to you via C<$?> if the function call fails. The
1920 C<@addrs> value returned by a successful call is a list of the raw
1921 addresses returned by the corresponding system library call. In the
1922 Internet domain, each address is four bytes long and you can unpack it
1923 by saying something like:
1925 ($a,$b,$c,$d) = unpack('C4',$addr[0]);
1927 The Socket library makes this slightly easier:
1930 $iaddr = inet_aton("127.1"); # or whatever address
1931 $name = gethostbyaddr($iaddr, AF_INET);
1933 # or going the other way
1934 $straddr = inet_ntoa($iaddr);
1936 If you get tired of remembering which element of the return list
1937 contains which return value, by-name interfaces are provided
1938 in standard modules: C<File::stat>, C<Net::hostent>, C<Net::netent>,
1939 C<Net::protoent>, C<Net::servent>, C<Time::gmtime>, C<Time::localtime>,
1940 and C<User::grent>. These override the normal built-ins, supplying
1941 versions that return objects with the appropriate names
1942 for each field. For example:
1946 $is_his = (stat($filename)->uid == pwent($whoever)->uid);
1948 Even though it looks like they're the same method calls (uid),
1949 they aren't, because a C<File::stat> object is different from
1950 a C<User::pwent> object.
1952 =item getsockname SOCKET
1954 Returns the packed sockaddr address of this end of the SOCKET connection,
1955 in case you don't know the address because you have several different
1956 IPs that the connection might have come in on.
1959 $mysockaddr = getsockname(SOCK);
1960 ($port, $myaddr) = sockaddr_in($mysockaddr);
1961 printf "Connect to %s [%s]\n",
1962 scalar gethostbyaddr($myaddr, AF_INET),
1965 =item getsockopt SOCKET,LEVEL,OPTNAME
1967 Returns the socket option requested, or undef if there is an error.
1973 Returns the value of EXPR with filename expansions such as the
1974 standard Unix shell F</bin/csh> would do. This is the internal function
1975 implementing the C<< <*.c> >> operator, but you can use it directly.
1976 If EXPR is omitted, C<$_> is used. The C<< <*.c> >> operator is
1977 discussed in more detail in L<perlop/"I/O Operators">.
1979 Beginning with v5.6.0, this operator is implemented using the standard
1980 C<File::Glob> extension. See L<File::Glob> for details.
1984 Converts a time as returned by the time function to a 8-element list
1985 with the time localized for the standard Greenwich time zone.
1986 Typically used as follows:
1989 ($sec,$min,$hour,$mday,$mon,$year,$wday,$yday) =
1992 All list elements are numeric, and come straight out of the C `struct
1993 tm'. $sec, $min, and $hour are the seconds, minutes, and hours of the
1994 specified time. $mday is the day of the month, and $mon is the month
1995 itself, in the range C<0..11> with 0 indicating January and 11
1996 indicating December. $year is the number of years since 1900. That
1997 is, $year is C<123> in year 2023. $wday is the day of the week, with
1998 0 indicating Sunday and 3 indicating Wednesday. $yday is the day of
1999 the year, in the range C<0..364> (or C<0..365> in leap years.)
2001 Note that the $year element is I<not> simply the last two digits of
2002 the year. If you assume it is, then you create non-Y2K-compliant
2003 programs--and you wouldn't want to do that, would you?
2005 The proper way to get a complete 4-digit year is simply:
2009 And to get the last two digits of the year (e.g., '01' in 2001) do:
2011 $year = sprintf("%02d", $year % 100);
2013 If EXPR is omitted, C<gmtime()> uses the current time (C<gmtime(time)>).
2015 In scalar context, C<gmtime()> returns the ctime(3) value:
2017 $now_string = gmtime; # e.g., "Thu Oct 13 04:54:34 1994"
2019 Also see the C<timegm> function provided by the C<Time::Local> module,
2020 and the strftime(3) function available via the POSIX module.
2022 This scalar value is B<not> locale dependent (see L<perllocale>), but
2023 is instead a Perl builtin. Also see the C<Time::Local> module, and the
2024 strftime(3) and mktime(3) functions available via the POSIX module. To
2025 get somewhat similar but locale dependent date strings, set up your
2026 locale environment variables appropriately (please see L<perllocale>)
2027 and try for example:
2029 use POSIX qw(strftime);
2030 $now_string = strftime "%a %b %e %H:%M:%S %Y", gmtime;
2032 Note that the C<%a> and C<%b> escapes, which represent the short forms
2033 of the day of the week and the month of the year, may not necessarily
2034 be three characters wide in all locales.
2042 The C<goto-LABEL> form finds the statement labeled with LABEL and resumes
2043 execution there. It may not be used to go into any construct that
2044 requires initialization, such as a subroutine or a C<foreach> loop. It
2045 also can't be used to go into a construct that is optimized away,
2046 or to get out of a block or subroutine given to C<sort>.
2047 It can be used to go almost anywhere else within the dynamic scope,
2048 including out of subroutines, but it's usually better to use some other
2049 construct such as C<last> or C<die>. The author of Perl has never felt the
2050 need to use this form of C<goto> (in Perl, that is--C is another matter).
2052 The C<goto-EXPR> form expects a label name, whose scope will be resolved
2053 dynamically. This allows for computed C<goto>s per FORTRAN, but isn't
2054 necessarily recommended if you're optimizing for maintainability:
2056 goto ("FOO", "BAR", "GLARCH")[$i];
2058 The C<goto-&NAME> form is quite different from the other forms of C<goto>.
2059 In fact, it isn't a goto in the normal sense at all, and doesn't have
2060 the stigma associated with other gotos. Instead, it
2061 substitutes a call to the named subroutine for the currently running
2062 subroutine. This is used by C<AUTOLOAD> subroutines that wish to load
2063 another subroutine and then pretend that the other subroutine had been
2064 called in the first place (except that any modifications to C<@_>
2065 in the current subroutine are propagated to the other subroutine.)
2066 After the C<goto>, not even C<caller> will be able to tell that this
2067 routine was called first.
2069 NAME needn't be the name of a subroutine; it can be a scalar variable
2070 containing a code reference, or a block which evaluates to a code
2073 =item grep BLOCK LIST
2075 =item grep EXPR,LIST
2077 This is similar in spirit to, but not the same as, grep(1) and its
2078 relatives. In particular, it is not limited to using regular expressions.
2080 Evaluates the BLOCK or EXPR for each element of LIST (locally setting
2081 C<$_> to each element) and returns the list value consisting of those
2082 elements for which the expression evaluated to true. In scalar
2083 context, returns the number of times the expression was true.
2085 @foo = grep(!/^#/, @bar); # weed out comments
2089 @foo = grep {!/^#/} @bar; # weed out comments
2091 Note that C<$_> is an alias to the list value, so it can be used to
2092 modify the elements of the LIST. While this is useful and supported,
2093 it can cause bizarre results if the elements of LIST are not variables.
2094 Similarly, grep returns aliases into the original list, much as a for
2095 loop's index variable aliases the list elements. That is, modifying an
2096 element of a list returned by grep (for example, in a C<foreach>, C<map>
2097 or another C<grep>) actually modifies the element in the original list.
2098 This is usually something to be avoided when writing clear code.
2100 See also L</map> for a list composed of the results of the BLOCK or EXPR.
2106 Interprets EXPR as a hex string and returns the corresponding value.
2107 (To convert strings that might start with either 0, 0x, or 0b, see
2108 L</oct>.) If EXPR is omitted, uses C<$_>.
2110 print hex '0xAf'; # prints '175'
2111 print hex 'aF'; # same
2113 Hex strings may only represent integers. Strings that would cause
2114 integer overflow trigger a warning.
2118 There is no builtin C<import> function. It is just an ordinary
2119 method (subroutine) defined (or inherited) by modules that wish to export
2120 names to another module. The C<use> function calls the C<import> method
2121 for the package used. See also L</use()>, L<perlmod>, and L<Exporter>.
2123 =item index STR,SUBSTR,POSITION
2125 =item index STR,SUBSTR
2127 The index function searches for one string within another, but without
2128 the wildcard-like behavior of a full regular-expression pattern match.
2129 It returns the position of the first occurrence of SUBSTR in STR at
2130 or after POSITION. If POSITION is omitted, starts searching from the
2131 beginning of the string. The return value is based at C<0> (or whatever
2132 you've set the C<$[> variable to--but don't do that). If the substring
2133 is not found, returns one less than the base, ordinarily C<-1>.
2139 Returns the integer portion of EXPR. If EXPR is omitted, uses C<$_>.
2140 You should not use this function for rounding: one because it truncates
2141 towards C<0>, and two because machine representations of floating point
2142 numbers can sometimes produce counterintuitive results. For example,
2143 C<int(-6.725/0.025)> produces -268 rather than the correct -269; that's
2144 because it's really more like -268.99999999999994315658 instead. Usually,
2145 the C<sprintf>, C<printf>, or the C<POSIX::floor> and C<POSIX::ceil>
2146 functions will serve you better than will int().
2148 =item ioctl FILEHANDLE,FUNCTION,SCALAR
2150 Implements the ioctl(2) function. You'll probably first have to say
2152 require "ioctl.ph"; # probably in /usr/local/lib/perl/ioctl.ph
2154 to get the correct function definitions. If F<ioctl.ph> doesn't
2155 exist or doesn't have the correct definitions you'll have to roll your
2156 own, based on your C header files such as F<< <sys/ioctl.h> >>.
2157 (There is a Perl script called B<h2ph> that comes with the Perl kit that
2158 may help you in this, but it's nontrivial.) SCALAR will be read and/or
2159 written depending on the FUNCTION--a pointer to the string value of SCALAR
2160 will be passed as the third argument of the actual C<ioctl> call. (If SCALAR
2161 has no string value but does have a numeric value, that value will be
2162 passed rather than a pointer to the string value. To guarantee this to be
2163 true, add a C<0> to the scalar before using it.) The C<pack> and C<unpack>
2164 functions may be needed to manipulate the values of structures used by
2167 The return value of C<ioctl> (and C<fcntl>) is as follows:
2169 if OS returns: then Perl returns:
2171 0 string "0 but true"
2172 anything else that number
2174 Thus Perl returns true on success and false on failure, yet you can
2175 still easily determine the actual value returned by the operating
2178 $retval = ioctl(...) || -1;
2179 printf "System returned %d\n", $retval;
2181 The special string "C<0> but true" is exempt from B<-w> complaints
2182 about improper numeric conversions.
2184 Here's an example of setting a filehandle named C<REMOTE> to be
2185 non-blocking at the system level. You'll have to negotiate C<$|>
2186 on your own, though.
2188 use Fcntl qw(F_GETFL F_SETFL O_NONBLOCK);
2190 $flags = fcntl(REMOTE, F_GETFL, 0)
2191 or die "Can't get flags for the socket: $!\n";
2193 $flags = fcntl(REMOTE, F_SETFL, $flags | O_NONBLOCK)
2194 or die "Can't set flags for the socket: $!\n";
2196 =item join EXPR,LIST
2198 Joins the separate strings of LIST into a single string with fields
2199 separated by the value of EXPR, and returns that new string. Example:
2201 $rec = join(':', $login,$passwd,$uid,$gid,$gcos,$home,$shell);
2203 Beware that unlike C<split>, C<join> doesn't take a pattern as its
2204 first argument. Compare L</split>.
2208 Returns a list consisting of all the keys of the named hash. (In
2209 scalar context, returns the number of keys.) The keys are returned in
2210 an apparently random order. The actual random order is subject to
2211 change in future versions of perl, but it is guaranteed to be the same
2212 order as either the C<values> or C<each> function produces (given
2213 that the hash has not been modified). As a side effect, it resets
2216 Here is yet another way to print your environment:
2219 @values = values %ENV;
2221 print pop(@keys), '=', pop(@values), "\n";
2224 or how about sorted by key:
2226 foreach $key (sort(keys %ENV)) {
2227 print $key, '=', $ENV{$key}, "\n";
2230 The returned values are copies of the original keys in the hash, so
2231 modifying them will not affect the original hash. Compare L</values>.
2233 To sort a hash by value, you'll need to use a C<sort> function.
2234 Here's a descending numeric sort of a hash by its values:
2236 foreach $key (sort { $hash{$b} <=> $hash{$a} } keys %hash) {
2237 printf "%4d %s\n", $hash{$key}, $key;
2240 As an lvalue C<keys> allows you to increase the number of hash buckets
2241 allocated for the given hash. This can gain you a measure of efficiency if
2242 you know the hash is going to get big. (This is similar to pre-extending
2243 an array by assigning a larger number to $#array.) If you say
2247 then C<%hash> will have at least 200 buckets allocated for it--256 of them,
2248 in fact, since it rounds up to the next power of two. These
2249 buckets will be retained even if you do C<%hash = ()>, use C<undef
2250 %hash> if you want to free the storage while C<%hash> is still in scope.
2251 You can't shrink the number of buckets allocated for the hash using
2252 C<keys> in this way (but you needn't worry about doing this by accident,
2253 as trying has no effect).
2255 See also C<each>, C<values> and C<sort>.
2257 =item kill SIGNAL, LIST
2259 Sends a signal to a list of processes. Returns the number of
2260 processes successfully signaled (which is not necessarily the
2261 same as the number actually killed).
2263 $cnt = kill 1, $child1, $child2;
2266 If SIGNAL is zero, no signal is sent to the process. This is a
2267 useful way to check that the process is alive and hasn't changed
2268 its UID. See L<perlport> for notes on the portability of this
2271 Unlike in the shell, if SIGNAL is negative, it kills
2272 process groups instead of processes. (On System V, a negative I<PROCESS>
2273 number will also kill process groups, but that's not portable.) That
2274 means you usually want to use positive not negative signals. You may also
2275 use a signal name in quotes. See L<perlipc/"Signals"> for details.
2281 The C<last> command is like the C<break> statement in C (as used in
2282 loops); it immediately exits the loop in question. If the LABEL is
2283 omitted, the command refers to the innermost enclosing loop. The
2284 C<continue> block, if any, is not executed:
2286 LINE: while (<STDIN>) {
2287 last LINE if /^$/; # exit when done with header
2291 C<last> cannot be used to exit a block which returns a value such as
2292 C<eval {}>, C<sub {}> or C<do {}>, and should not be used to exit
2293 a grep() or map() operation.
2295 Note that a block by itself is semantically identical to a loop
2296 that executes once. Thus C<last> can be used to effect an early
2297 exit out of such a block.
2299 See also L</continue> for an illustration of how C<last>, C<next>, and
2306 Returns an lowercased version of EXPR. This is the internal function
2307 implementing the C<\L> escape in double-quoted strings.
2308 Respects current LC_CTYPE locale if C<use locale> in force. See L<perllocale>
2311 If EXPR is omitted, uses C<$_>.
2317 Returns the value of EXPR with the first character lowercased. This is
2318 the internal function implementing the C<\l> escape in double-quoted strings.
2319 Respects current LC_CTYPE locale if C<use locale> in force. See L<perllocale>.
2321 If EXPR is omitted, uses C<$_>.
2327 Returns the length in characters of the value of EXPR. If EXPR is
2328 omitted, returns length of C<$_>. Note that this cannot be used on
2329 an entire array or hash to find out how many elements these have.
2330 For that, use C<scalar @array> and C<scalar keys %hash> respectively.
2332 =item link OLDFILE,NEWFILE
2334 Creates a new filename linked to the old filename. Returns true for
2335 success, false otherwise.
2337 =item listen SOCKET,QUEUESIZE
2339 Does the same thing that the listen system call does. Returns true if
2340 it succeeded, false otherwise. See the example in L<perlipc/"Sockets: Client/Server Communication">.
2344 You really probably want to be using C<my> instead, because C<local> isn't
2345 what most people think of as "local". See
2346 L<perlsub/"Private Variables via my()"> for details.
2348 A local modifies the listed variables to be local to the enclosing
2349 block, file, or eval. If more than one value is listed, the list must
2350 be placed in parentheses. See L<perlsub/"Temporary Values via local()">
2351 for details, including issues with tied arrays and hashes.
2353 =item localtime EXPR
2355 Converts a time as returned by the time function to a 9-element list
2356 with the time analyzed for the local time zone. Typically used as
2360 ($sec,$min,$hour,$mday,$mon,$year,$wday,$yday,$isdst) =
2363 All list elements are numeric, and come straight out of the C `struct
2364 tm'. $sec, $min, and $hour are the seconds, minutes, and hours of the
2365 specified time. $mday is the day of the month, and $mon is the month
2366 itself, in the range C<0..11> with 0 indicating January and 11
2367 indicating December. $year is the number of years since 1900. That
2368 is, $year is C<123> in year 2023. $wday is the day of the week, with
2369 0 indicating Sunday and 3 indicating Wednesday. $yday is the day of
2370 the year, in the range C<0..364> (or C<0..365> in leap years.) $isdst
2371 is true if the specified time occurs during daylight savings time,
2374 Note that the $year element is I<not> simply the last two digits of
2375 the year. If you assume it is, then you create non-Y2K-compliant
2376 programs--and you wouldn't want to do that, would you?
2378 The proper way to get a complete 4-digit year is simply:
2382 And to get the last two digits of the year (e.g., '01' in 2001) do:
2384 $year = sprintf("%02d", $year % 100);
2386 If EXPR is omitted, C<localtime()> uses the current time (C<localtime(time)>).
2388 In scalar context, C<localtime()> returns the ctime(3) value:
2390 $now_string = localtime; # e.g., "Thu Oct 13 04:54:34 1994"
2392 This scalar value is B<not> locale dependent, see L<perllocale>, but
2393 instead a Perl builtin. Also see the C<Time::Local> module
2394 (to convert the second, minutes, hours, ... back to seconds since the
2395 stroke of midnight the 1st of January 1970, the value returned by
2396 time()), and the strftime(3) and mktime(3) functions available via the
2397 POSIX module. To get somewhat similar but locale dependent date
2398 strings, set up your locale environment variables appropriately
2399 (please see L<perllocale>) and try for example:
2401 use POSIX qw(strftime);
2402 $now_string = strftime "%a %b %e %H:%M:%S %Y", localtime;
2404 Note that the C<%a> and C<%b>, the short forms of the day of the week
2405 and the month of the year, may not necessarily be three characters wide.
2411 This function places an advisory lock on a variable, subroutine,
2412 or referenced object contained in I<THING> until the lock goes out
2413 of scope. This is a built-in function only if your version of Perl
2414 was built with threading enabled, and if you've said C<use Threads>.
2415 Otherwise a user-defined function by this name will be called. See
2422 Returns the natural logarithm (base I<e>) of EXPR. If EXPR is omitted,
2423 returns log of C<$_>. To get the log of another base, use basic algebra:
2424 The base-N log of a number is equal to the natural log of that number
2425 divided by the natural log of N. For example:
2429 return log($n)/log(10);
2432 See also L</exp> for the inverse operation.
2438 Does the same thing as the C<stat> function (including setting the
2439 special C<_> filehandle) but stats a symbolic link instead of the file
2440 the symbolic link points to. If symbolic links are unimplemented on
2441 your system, a normal C<stat> is done.
2443 If EXPR is omitted, stats C<$_>.
2447 The match operator. See L<perlop>.
2449 =item map BLOCK LIST
2453 Evaluates the BLOCK or EXPR for each element of LIST (locally setting
2454 C<$_> to each element) and returns the list value composed of the
2455 results of each such evaluation. In scalar context, returns the
2456 total number of elements so generated. Evaluates BLOCK or EXPR in
2457 list context, so each element of LIST may produce zero, one, or
2458 more elements in the returned value.
2460 @chars = map(chr, @nums);
2462 translates a list of numbers to the corresponding characters. And
2464 %hash = map { getkey($_) => $_ } @array;
2466 is just a funny way to write
2469 foreach $_ (@array) {
2470 $hash{getkey($_)} = $_;
2473 Note that C<$_> is an alias to the list value, so it can be used to
2474 modify the elements of the LIST. While this is useful and supported,
2475 it can cause bizarre results if the elements of LIST are not variables.
2476 Using a regular C<foreach> loop for this purpose would be clearer in
2477 most cases. See also L</grep> for an array composed of those items of
2478 the original list for which the BLOCK or EXPR evaluates to true.
2480 C<{> starts both hash references and blocks, so C<map { ...> could be either
2481 the start of map BLOCK LIST or map EXPR, LIST. Because perl doesn't look
2482 ahead for the closing C<}> it has to take a guess at which its dealing with
2483 based what it finds just after the C<{>. Usually it gets it right, but if it
2484 doesn't it won't realize something is wrong until it gets to the C<}> and
2485 encounters the missing (or unexpected) comma. The syntax error will be
2486 reported close to the C<}> but you'll need to change something near the C<{>
2487 such as using a unary C<+> to give perl some help:
2489 %hash = map { "\L$_", 1 } @array # perl guesses EXPR. wrong
2490 %hash = map { +"\L$_", 1 } @array # perl guesses BLOCK. right
2491 %hash = map { ("\L$_", 1) } @array # this also works
2492 %hash = map { lc($_), 1 } @array # as does this.
2493 %hash = map +( lc($_), 1 ), @array # this is EXPR and works!
2495 %hash = map ( lc($_), 1 ), @array # evaluates to (1, @array)
2497 or to force an anon hash constructor use C<+{>
2499 @hashes = map +{ lc($_), 1 }, @array # EXPR, so needs , at end
2501 and you get list of anonymous hashes each with only 1 entry.
2503 =item mkdir FILENAME,MASK
2505 =item mkdir FILENAME
2507 Creates the directory specified by FILENAME, with permissions
2508 specified by MASK (as modified by C<umask>). If it succeeds it
2509 returns true, otherwise it returns false and sets C<$!> (errno).
2510 If omitted, MASK defaults to 0777.
2512 In general, it is better to create directories with permissive MASK,
2513 and let the user modify that with their C<umask>, than it is to supply
2514 a restrictive MASK and give the user no way to be more permissive.
2515 The exceptions to this rule are when the file or directory should be
2516 kept private (mail files, for instance). The perlfunc(1) entry on
2517 C<umask> discusses the choice of MASK in more detail.
2519 Note that according to the POSIX 1003.1-1996 the FILENAME may have any
2520 number of trailing slashes. Some operating and filesystems do not get
2521 this right, so Perl automatically removes all trailing slashes to keep
2524 =item msgctl ID,CMD,ARG
2526 Calls the System V IPC function msgctl(2). You'll probably have to say
2530 first to get the correct constant definitions. If CMD is C<IPC_STAT>,
2531 then ARG must be a variable which will hold the returned C<msqid_ds>
2532 structure. Returns like C<ioctl>: the undefined value for error,
2533 C<"0 but true"> for zero, or the actual return value otherwise. See also
2534 L<perlipc/"SysV IPC">, C<IPC::SysV>, and C<IPC::Semaphore> documentation.
2536 =item msgget KEY,FLAGS
2538 Calls the System V IPC function msgget(2). Returns the message queue
2539 id, or the undefined value if there is an error. See also
2540 L<perlipc/"SysV IPC"> and C<IPC::SysV> and C<IPC::Msg> documentation.
2542 =item msgrcv ID,VAR,SIZE,TYPE,FLAGS
2544 Calls the System V IPC function msgrcv to receive a message from
2545 message queue ID into variable VAR with a maximum message size of
2546 SIZE. Note that when a message is received, the message type as a
2547 native long integer will be the first thing in VAR, followed by the
2548 actual message. This packing may be opened with C<unpack("l! a*")>.
2549 Taints the variable. Returns true if successful, or false if there is
2550 an error. See also L<perlipc/"SysV IPC">, C<IPC::SysV>, and
2551 C<IPC::SysV::Msg> documentation.
2553 =item msgsnd ID,MSG,FLAGS
2555 Calls the System V IPC function msgsnd to send the message MSG to the
2556 message queue ID. MSG must begin with the native long integer message
2557 type, and be followed by the length of the actual message, and finally
2558 the message itself. This kind of packing can be achieved with
2559 C<pack("l! a*", $type, $message)>. Returns true if successful,
2560 or false if there is an error. See also C<IPC::SysV>
2561 and C<IPC::SysV::Msg> documentation.
2565 =item my EXPR : ATTRIBUTES
2567 A C<my> declares the listed variables to be local (lexically) to the
2568 enclosing block, file, or C<eval>. If
2569 more than one value is listed, the list must be placed in parentheses. See
2570 L<perlsub/"Private Variables via my()"> for details.
2576 The C<next> command is like the C<continue> statement in C; it starts
2577 the next iteration of the loop:
2579 LINE: while (<STDIN>) {
2580 next LINE if /^#/; # discard comments
2584 Note that if there were a C<continue> block on the above, it would get
2585 executed even on discarded lines. If the LABEL is omitted, the command
2586 refers to the innermost enclosing loop.
2588 C<next> cannot be used to exit a block which returns a value such as
2589 C<eval {}>, C<sub {}> or C<do {}>, and should not be used to exit
2590 a grep() or map() operation.
2592 Note that a block by itself is semantically identical to a loop
2593 that executes once. Thus C<next> will exit such a block early.
2595 See also L</continue> for an illustration of how C<last>, C<next>, and
2598 =item no Module LIST
2600 See the L</use> function, which C<no> is the opposite of.
2606 Interprets EXPR as an octal string and returns the corresponding
2607 value. (If EXPR happens to start off with C<0x>, interprets it as a
2608 hex string. If EXPR starts off with C<0b>, it is interpreted as a
2609 binary string.) The following will handle decimal, binary, octal, and
2610 hex in the standard Perl or C notation:
2612 $val = oct($val) if $val =~ /^0/;
2614 If EXPR is omitted, uses C<$_>. To go the other way (produce a number
2615 in octal), use sprintf() or printf():
2617 $perms = (stat("filename"))[2] & 07777;
2618 $oct_perms = sprintf "%lo", $perms;
2620 The oct() function is commonly used when a string such as C<644> needs
2621 to be converted into a file mode, for example. (Although perl will
2622 automatically convert strings into numbers as needed, this automatic
2623 conversion assumes base 10.)
2625 =item open FILEHANDLE,MODE,LIST
2627 =item open FILEHANDLE,EXPR
2629 =item open FILEHANDLE
2631 Opens the file whose filename is given by EXPR, and associates it with
2632 FILEHANDLE. If FILEHANDLE is an expression, its value is used as the
2633 name of the real filehandle wanted. (This is considered a symbolic
2634 reference, so C<use strict 'refs'> should I<not> be in effect.)
2636 If EXPR is omitted, the scalar
2637 variable of the same name as the FILEHANDLE contains the filename.
2638 (Note that lexical variables--those declared with C<my>--will not work
2639 for this purpose; so if you're using C<my>, specify EXPR in your call
2640 to open.) See L<perlopentut> for a kinder, gentler explanation of opening
2643 If MODE is C<< '<' >> or nothing, the file is opened for input.
2644 If MODE is C<< '>' >>, the file is truncated and opened for
2645 output, being created if necessary. If MODE is C<<< '>>' >>>,
2646 the file is opened for appending, again being created if necessary.
2647 You can put a C<'+'> in front of the C<< '>' >> or C<< '<' >> to indicate that
2648 you want both read and write access to the file; thus C<< '+<' >> is almost
2649 always preferred for read/write updates--the C<< '+>' >> mode would clobber the
2650 file first. You can't usually use either read-write mode for updating
2651 textfiles, since they have variable length records. See the B<-i>
2652 switch in L<perlrun> for a better approach. The file is created with
2653 permissions of C<0666> modified by the process' C<umask> value.
2655 These various prefixes correspond to the fopen(3) modes of C<'r'>, C<'r+'>,
2656 C<'w'>, C<'w+'>, C<'a'>, and C<'a+'>.
2658 In the 2-arguments (and 1-argument) form of the call the mode and
2659 filename should be concatenated (in this order), possibly separated by
2660 spaces. It is possible to omit the mode if the mode is C<< '<' >>.
2662 If the filename begins with C<'|'>, the filename is interpreted as a
2663 command to which output is to be piped, and if the filename ends with a
2664 C<'|'>, the filename is interpreted as a command which pipes output to
2665 us. See L<perlipc/"Using open() for IPC">
2666 for more examples of this. (You are not allowed to C<open> to a command
2667 that pipes both in I<and> out, but see L<IPC::Open2>, L<IPC::Open3>,
2668 and L<perlipc/"Bidirectional Communication with Another Process">
2671 If MODE is C<'|-'>, the filename is interpreted as a
2672 command to which output is to be piped, and if MODE is
2673 C<'-|'>, the filename is interpreted as a command which pipes output to
2674 us. In the 2-arguments (and 1-argument) form one should replace dash
2675 (C<'-'>) with the command. See L<perlipc/"Using open() for IPC">
2676 for more examples of this. (You are not allowed to C<open> to a command
2677 that pipes both in I<and> out, but see L<IPC::Open2>, L<IPC::Open3>,
2678 and L<perlipc/"Bidirectional Communication"> for alternatives.)
2680 In the 2-arguments (and 1-argument) form opening C<'-'> opens STDIN
2681 and opening C<< '>-' >> opens STDOUT.
2684 nonzero upon success, the undefined value otherwise. If the C<open>
2685 involved a pipe, the return value happens to be the pid of the
2688 If you're unfortunate enough to be running Perl on a system that
2689 distinguishes between text files and binary files (modern operating
2690 systems don't care), then you should check out L</binmode> for tips for
2691 dealing with this. The key distinction between systems that need C<binmode>
2692 and those that don't is their text file formats. Systems like Unix, MacOS, and
2693 Plan9, which delimit lines with a single character, and which encode that
2694 character in C as C<"\n">, do not need C<binmode>. The rest need it.
2696 When opening a file, it's usually a bad idea to continue normal execution
2697 if the request failed, so C<open> is frequently used in connection with
2698 C<die>. Even if C<die> won't do what you want (say, in a CGI script,
2699 where you want to make a nicely formatted error message (but there are
2700 modules that can help with that problem)) you should always check
2701 the return value from opening a file. The infrequent exception is when
2702 working with an unopened filehandle is actually what you want to do.
2707 open ARTICLE or die "Can't find article $ARTICLE: $!\n";
2708 while (<ARTICLE>) {...
2710 open(LOG, '>>/usr/spool/news/twitlog'); # (log is reserved)
2711 # if the open fails, output is discarded
2713 open(DBASE, '+<', 'dbase.mine') # open for update
2714 or die "Can't open 'dbase.mine' for update: $!";
2716 open(DBASE, '+<dbase.mine') # ditto
2717 or die "Can't open 'dbase.mine' for update: $!";
2719 open(ARTICLE, '-|', "caesar <$article") # decrypt article
2720 or die "Can't start caesar: $!";
2722 open(ARTICLE, "caesar <$article |") # ditto
2723 or die "Can't start caesar: $!";
2725 open(EXTRACT, "|sort >/tmp/Tmp$$") # $$ is our process id
2726 or die "Can't start sort: $!";
2728 # process argument list of files along with any includes
2730 foreach $file (@ARGV) {
2731 process($file, 'fh00');
2735 my($filename, $input) = @_;
2736 $input++; # this is a string increment
2737 unless (open($input, $filename)) {
2738 print STDERR "Can't open $filename: $!\n";
2743 while (<$input>) { # note use of indirection
2744 if (/^#include "(.*)"/) {
2745 process($1, $input);
2752 You may also, in the Bourne shell tradition, specify an EXPR beginning
2753 with C<< '>&' >>, in which case the rest of the string is interpreted as the
2754 name of a filehandle (or file descriptor, if numeric) to be
2755 duped and opened. You may use C<&> after C<< > >>, C<<< >> >>>,
2756 C<< < >>, C<< +> >>, C<<< +>> >>>, and C<< +< >>. The
2757 mode you specify should match the mode of the original filehandle.
2758 (Duping a filehandle does not take into account any existing contents of
2759 stdio buffers.) Duping file handles is not yet supported for 3-argument
2762 Here is a script that saves, redirects, and restores STDOUT and
2766 open(OLDOUT, ">&STDOUT");
2767 open(OLDERR, ">&STDERR");
2769 open(STDOUT, '>', "foo.out") || die "Can't redirect stdout";
2770 open(STDERR, ">&STDOUT") || die "Can't dup stdout";
2772 select(STDERR); $| = 1; # make unbuffered
2773 select(STDOUT); $| = 1; # make unbuffered
2775 print STDOUT "stdout 1\n"; # this works for
2776 print STDERR "stderr 1\n"; # subprocesses too
2781 open(STDOUT, ">&OLDOUT");
2782 open(STDERR, ">&OLDERR");
2784 print STDOUT "stdout 2\n";
2785 print STDERR "stderr 2\n";
2787 If you specify C<< '<&=N' >>, where C<N> is a number, then Perl will do an
2788 equivalent of C's C<fdopen> of that file descriptor; this is more
2789 parsimonious of file descriptors. For example:
2791 open(FILEHANDLE, "<&=$fd")
2793 Note that this feature depends on the fdopen() C library function.
2794 On many UNIX systems, fdopen() is known to fail when file descriptors
2795 exceed a certain value, typically 255. If you need more file
2796 descriptors than that, consider rebuilding Perl to use the C<sfio>
2799 If you open a pipe on the command C<'-'>, i.e., either C<'|-'> or C<'-|'>
2800 with 2-arguments (or 1-argument) form of open(), then
2801 there is an implicit fork done, and the return value of open is the pid
2802 of the child within the parent process, and C<0> within the child
2803 process. (Use C<defined($pid)> to determine whether the open was successful.)
2804 The filehandle behaves normally for the parent, but i/o to that
2805 filehandle is piped from/to the STDOUT/STDIN of the child process.
2806 In the child process the filehandle isn't opened--i/o happens from/to
2807 the new STDOUT or STDIN. Typically this is used like the normal
2808 piped open when you want to exercise more control over just how the
2809 pipe command gets executed, such as when you are running setuid, and
2810 don't want to have to scan shell commands for metacharacters.
2811 The following triples are more or less equivalent:
2813 open(FOO, "|tr '[a-z]' '[A-Z]'");
2814 open(FOO, '|-', "tr '[a-z]' '[A-Z]'");
2815 open(FOO, '|-') || exec 'tr', '[a-z]', '[A-Z]';
2817 open(FOO, "cat -n '$file'|");
2818 open(FOO, '-|', "cat -n '$file'");
2819 open(FOO, '-|') || exec 'cat', '-n', $file;
2821 See L<perlipc/"Safe Pipe Opens"> for more examples of this.
2823 Beginning with v5.6.0, Perl will attempt to flush all files opened for
2824 output before any operation that may do a fork, but this may not be
2825 supported on some platforms (see L<perlport>). To be safe, you may need
2826 to set C<$|> ($AUTOFLUSH in English) or call the C<autoflush()> method
2827 of C<IO::Handle> on any open handles.
2829 On systems that support a
2830 close-on-exec flag on files, the flag will be set for the newly opened
2831 file descriptor as determined by the value of $^F. See L<perlvar/$^F>.
2833 Closing any piped filehandle causes the parent process to wait for the
2834 child to finish, and returns the status value in C<$?>.
2836 The filename passed to 2-argument (or 1-argument) form of open()
2837 will have leading and trailing
2838 whitespace deleted, and the normal redirection characters
2839 honored. This property, known as "magic open",
2840 can often be used to good effect. A user could specify a filename of
2841 F<"rsh cat file |">, or you could change certain filenames as needed:
2843 $filename =~ s/(.*\.gz)\s*$/gzip -dc < $1|/;
2844 open(FH, $filename) or die "Can't open $filename: $!";
2846 Use 3-argument form to open a file with arbitrary weird characters in it,
2848 open(FOO, '<', $file);
2850 otherwise it's necessary to protect any leading and trailing whitespace:
2852 $file =~ s#^(\s)#./$1#;
2853 open(FOO, "< $file\0");
2855 (this may not work on some bizarre filesystems). One should
2856 conscientiously choose between the I<magic> and 3-arguments form
2861 will allow the user to specify an argument of the form C<"rsh cat file |">,
2862 but will not work on a filename which happens to have a trailing space, while
2864 open IN, '<', $ARGV[0];
2866 will have exactly the opposite restrictions.
2868 If you want a "real" C C<open> (see L<open(2)> on your system), then you
2869 should use the C<sysopen> function, which involves no such magic (but
2870 may use subtly different filemodes than Perl open(), which is mapped
2871 to C fopen()). This is
2872 another way to protect your filenames from interpretation. For example:
2875 sysopen(HANDLE, $path, O_RDWR|O_CREAT|O_EXCL)
2876 or die "sysopen $path: $!";
2877 $oldfh = select(HANDLE); $| = 1; select($oldfh);
2878 print HANDLE "stuff $$\n";
2880 print "File contains: ", <HANDLE>;
2882 Using the constructor from the C<IO::Handle> package (or one of its
2883 subclasses, such as C<IO::File> or C<IO::Socket>), you can generate anonymous
2884 filehandles that have the scope of whatever variables hold references to
2885 them, and automatically close whenever and however you leave that scope:
2889 sub read_myfile_munged {
2891 my $handle = new IO::File;
2892 open($handle, "myfile") or die "myfile: $!";
2894 or return (); # Automatically closed here.
2895 mung $first or die "mung failed"; # Or here.
2896 return $first, <$handle> if $ALL; # Or here.
2900 See L</seek> for some details about mixing reading and writing.
2902 =item opendir DIRHANDLE,EXPR
2904 Opens a directory named EXPR for processing by C<readdir>, C<telldir>,
2905 C<seekdir>, C<rewinddir>, and C<closedir>. Returns true if successful.
2906 DIRHANDLEs have their own namespace separate from FILEHANDLEs.
2912 Returns the numeric (ASCII or Unicode) value of the first character of EXPR. If
2913 EXPR is omitted, uses C<$_>. For the reverse, see L</chr>.
2914 See L<utf8> for more about Unicode.
2918 An C<our> declares the listed variables to be valid globals within
2919 the enclosing block, file, or C<eval>. That is, it has the same
2920 scoping rules as a "my" declaration, but does not create a local
2921 variable. If more than one value is listed, the list must be placed
2922 in parentheses. The C<our> declaration has no semantic effect unless
2923 "use strict vars" is in effect, in which case it lets you use the
2924 declared global variable without qualifying it with a package name.
2925 (But only within the lexical scope of the C<our> declaration. In this
2926 it differs from "use vars", which is package scoped.)
2928 An C<our> declaration declares a global variable that will be visible
2929 across its entire lexical scope, even across package boundaries. The
2930 package in which the variable is entered is determined at the point
2931 of the declaration, not at the point of use. This means the following
2935 our $bar; # declares $Foo::bar for rest of lexical scope
2939 print $bar; # prints 20
2941 Multiple C<our> declarations in the same lexical scope are allowed
2942 if they are in different packages. If they happened to be in the same
2943 package, Perl will emit warnings if you have asked for them.
2947 our $bar; # declares $Foo::bar for rest of lexical scope
2951 our $bar = 30; # declares $Bar::bar for rest of lexical scope
2952 print $bar; # prints 30
2954 our $bar; # emits warning
2956 =item pack TEMPLATE,LIST
2958 Takes a LIST of values and converts it into a string using the rules
2959 given by the TEMPLATE. The resulting string is the concatenation of
2960 the converted values. Typically, each converted value looks
2961 like its machine-level representation. For example, on 32-bit machines
2962 a converted integer may be represented by a sequence of 4 bytes.
2965 sequence of characters that give the order and type of values, as
2968 a A string with arbitrary binary data, will be null padded.
2969 A An ASCII string, will be space padded.
2970 Z A null terminated (asciz) string, will be null padded.
2972 b A bit string (ascending bit order inside each byte, like vec()).
2973 B A bit string (descending bit order inside each byte).
2974 h A hex string (low nybble first).
2975 H A hex string (high nybble first).
2977 c A signed char value.
2978 C An unsigned char value. Only does bytes. See U for Unicode.
2980 s A signed short value.
2981 S An unsigned short value.
2982 (This 'short' is _exactly_ 16 bits, which may differ from
2983 what a local C compiler calls 'short'. If you want
2984 native-length shorts, use the '!' suffix.)
2986 i A signed integer value.
2987 I An unsigned integer value.
2988 (This 'integer' is _at_least_ 32 bits wide. Its exact
2989 size depends on what a local C compiler calls 'int',
2990 and may even be larger than the 'long' described in
2993 l A signed long value.
2994 L An unsigned long value.
2995 (This 'long' is _exactly_ 32 bits, which may differ from
2996 what a local C compiler calls 'long'. If you want
2997 native-length longs, use the '!' suffix.)
2999 n An unsigned short in "network" (big-endian) order.
3000 N An unsigned long in "network" (big-endian) order.
3001 v An unsigned short in "VAX" (little-endian) order.
3002 V An unsigned long in "VAX" (little-endian) order.
3003 (These 'shorts' and 'longs' are _exactly_ 16 bits and
3004 _exactly_ 32 bits, respectively.)
3006 q A signed quad (64-bit) value.
3007 Q An unsigned quad value.
3008 (Quads are available only if your system supports 64-bit
3009 integer values _and_ if Perl has been compiled to support those.
3010 Causes a fatal error otherwise.)
3012 f A single-precision float in the native format.
3013 d A double-precision float in the native format.
3015 p A pointer to a null-terminated string.
3016 P A pointer to a structure (fixed-length string).
3018 u A uuencoded string.
3019 U A Unicode character number. Encodes to UTF-8 internally.
3020 Works even if C<use utf8> is not in effect.
3022 w A BER compressed integer. Its bytes represent an unsigned
3023 integer in base 128, most significant digit first, with as
3024 few digits as possible. Bit eight (the high bit) is set
3025 on each byte except the last.
3029 @ Null fill to absolute position.
3031 The following rules apply:
3037 Each letter may optionally be followed by a number giving a repeat
3038 count. With all types except C<a>, C<A>, C<Z>, C<b>, C<B>, C<h>,
3039 C<H>, and C<P> the pack function will gobble up that many values from
3040 the LIST. A C<*> for the repeat count means to use however many items are
3041 left, except for C<@>, C<x>, C<X>, where it is equivalent
3042 to C<0>, and C<u>, where it is equivalent to 1 (or 45, what is the
3045 When used with C<Z>, C<*> results in the addition of a trailing null
3046 byte (so the packed result will be one longer than the byte C<length>
3049 The repeat count for C<u> is interpreted as the maximal number of bytes
3050 to encode per line of output, with 0 and 1 replaced by 45.
3054 The C<a>, C<A>, and C<Z> types gobble just one value, but pack it as a
3055 string of length count, padding with nulls or spaces as necessary. When
3056 unpacking, C<A> strips trailing spaces and nulls, C<Z> strips everything
3057 after the first null, and C<a> returns data verbatim. When packing,
3058 C<a>, and C<Z> are equivalent.
3060 If the value-to-pack is too long, it is truncated. If too long and an
3061 explicit count is provided, C<Z> packs only C<$count-1> bytes, followed
3062 by a null byte. Thus C<Z> always packs a trailing null byte under
3067 Likewise, the C<b> and C<B> fields pack a string that many bits long.
3068 Each byte of the input field of pack() generates 1 bit of the result.
3069 Each result bit is based on the least-significant bit of the corresponding
3070 input byte, i.e., on C<ord($byte)%2>. In particular, bytes C<"0"> and
3071 C<"1"> generate bits 0 and 1, as do bytes C<"\0"> and C<"\1">.
3073 Starting from the beginning of the input string of pack(), each 8-tuple
3074 of bytes is converted to 1 byte of output. With format C<b>
3075 the first byte of the 8-tuple determines the least-significant bit of a
3076 byte, and with format C<B> it determines the most-significant bit of
3079 If the length of the input string is not exactly divisible by 8, the
3080 remainder is packed as if the input string were padded by null bytes
3081 at the end. Similarly, during unpack()ing the "extra" bits are ignored.
3083 If the input string of pack() is longer than needed, extra bytes are ignored.
3084 A C<*> for the repeat count of pack() means to use all the bytes of
3085 the input field. On unpack()ing the bits are converted to a string
3086 of C<"0">s and C<"1">s.
3090 The C<h> and C<H> fields pack a string that many nybbles (4-bit groups,
3091 representable as hexadecimal digits, 0-9a-f) long.
3093 Each byte of the input field of pack() generates 4 bits of the result.
3094 For non-alphabetical bytes the result is based on the 4 least-significant
3095 bits of the input byte, i.e., on C<ord($byte)%16>. In particular,
3096 bytes C<"0"> and C<"1"> generate nybbles 0 and 1, as do bytes
3097 C<"\0"> and C<"\1">. For bytes C<"a".."f"> and C<"A".."F"> the result
3098 is compatible with the usual hexadecimal digits, so that C<"a"> and
3099 C<"A"> both generate the nybble C<0xa==10>. The result for bytes
3100 C<"g".."z"> and C<"G".."Z"> is not well-defined.
3102 Starting from the beginning of the input string of pack(), each pair
3103 of bytes is converted to 1 byte of output. With format C<h> the
3104 first byte of the pair determines the least-significant nybble of the
3105 output byte, and with format C<H> it determines the most-significant
3108 If the length of the input string is not even, it behaves as if padded
3109 by a null byte at the end. Similarly, during unpack()ing the "extra"
3110 nybbles are ignored.
3112 If the input string of pack() is longer than needed, extra bytes are ignored.
3113 A C<*> for the repeat count of pack() means to use all the bytes of
3114 the input field. On unpack()ing the bits are converted to a string
3115 of hexadecimal digits.
3119 The C<p> type packs a pointer to a null-terminated string. You are
3120 responsible for ensuring the string is not a temporary value (which can
3121 potentially get deallocated before you get around to using the packed result).
3122 The C<P> type packs a pointer to a structure of the size indicated by the
3123 length. A NULL pointer is created if the corresponding value for C<p> or
3124 C<P> is C<undef>, similarly for unpack().
3128 The C</> template character allows packing and unpacking of strings where
3129 the packed structure contains a byte count followed by the string itself.
3130 You write I<length-item>C</>I<string-item>.
3132 The I<length-item> can be any C<pack> template letter,
3133 and describes how the length value is packed.
3134 The ones likely to be of most use are integer-packing ones like
3135 C<n> (for Java strings), C<w> (for ASN.1 or SNMP)
3136 and C<N> (for Sun XDR).
3138 The I<string-item> must, at present, be C<"A*">, C<"a*"> or C<"Z*">.
3139 For C<unpack> the length of the string is obtained from the I<length-item>,
3140 but if you put in the '*' it will be ignored.
3142 unpack 'C/a', "\04Gurusamy"; gives 'Guru'
3143 unpack 'a3/A* A*', '007 Bond J '; gives (' Bond','J')
3144 pack 'n/a* w/a*','hello,','world'; gives "\000\006hello,\005world"
3146 The I<length-item> is not returned explicitly from C<unpack>.
3148 Adding a count to the I<length-item> letter is unlikely to do anything
3149 useful, unless that letter is C<A>, C<a> or C<Z>. Packing with a
3150 I<length-item> of C<a> or C<Z> may introduce C<"\000"> characters,
3151 which Perl does not regard as legal in numeric strings.
3155 The integer types C<s>, C<S>, C<l>, and C<L> may be
3156 immediately followed by a C<!> suffix to signify native shorts or
3157 longs--as you can see from above for example a bare C<l> does mean
3158 exactly 32 bits, the native C<long> (as seen by the local C compiler)
3159 may be larger. This is an issue mainly in 64-bit platforms. You can
3160 see whether using C<!> makes any difference by
3162 print length(pack("s")), " ", length(pack("s!")), "\n";
3163 print length(pack("l")), " ", length(pack("l!")), "\n";
3165 C<i!> and C<I!> also work but only because of completeness;
3166 they are identical to C<i> and C<I>.
3168 The actual sizes (in bytes) of native shorts, ints, longs, and long
3169 longs on the platform where Perl was built are also available via
3173 print $Config{shortsize}, "\n";
3174 print $Config{intsize}, "\n";
3175 print $Config{longsize}, "\n";
3176 print $Config{longlongsize}, "\n";
3178 (The C<$Config{longlongsize}> will be undefine if your system does
3179 not support long longs.)
3183 The integer formats C<s>, C<S>, C<i>, C<I>, C<l>, and C<L>
3184 are inherently non-portable between processors and operating systems
3185 because they obey the native byteorder and endianness. For example a
3186 4-byte integer 0x12345678 (305419896 decimal) be ordered natively
3187 (arranged in and handled by the CPU registers) into bytes as
3189 0x12 0x34 0x56 0x78 # big-endian
3190 0x78 0x56 0x34 0x12 # little-endian
3192 Basically, the Intel and VAX CPUs are little-endian, while everybody
3193 else, for example Motorola m68k/88k, PPC, Sparc, HP PA, Power, and
3194 Cray are big-endian. Alpha and MIPS can be either: Digital/Compaq
3195 used/uses them in little-endian mode; SGI/Cray uses them in big-endian mode.
3197 The names `big-endian' and `little-endian' are comic references to
3198 the classic "Gulliver's Travels" (via the paper "On Holy Wars and a
3199 Plea for Peace" by Danny Cohen, USC/ISI IEN 137, April 1, 1980) and
3200 the egg-eating habits of the Lilliputians.
3202 Some systems may have even weirder byte orders such as
3207 You can see your system's preference with
3209 print join(" ", map { sprintf "%#02x", $_ }
3210 unpack("C*",pack("L",0x12345678))), "\n";
3212 The byteorder on the platform where Perl was built is also available
3216 print $Config{byteorder}, "\n";
3218 Byteorders C<'1234'> and C<'12345678'> are little-endian, C<'4321'>
3219 and C<'87654321'> are big-endian.
3221 If you want portable packed integers use the formats C<n>, C<N>,
3222 C<v>, and C<V>, their byte endianness and size is known.
3223 See also L<perlport>.
3227 Real numbers (floats and doubles) are in the native machine format only;
3228 due to the multiplicity of floating formats around, and the lack of a
3229 standard "network" representation, no facility for interchange has been
3230 made. This means that packed floating point data written on one machine
3231 may not be readable on another - even if both use IEEE floating point
3232 arithmetic (as the endian-ness of the memory representation is not part
3233 of the IEEE spec). See also L<perlport>.
3235 Note that Perl uses doubles internally for all numeric calculation, and
3236 converting from double into float and thence back to double again will
3237 lose precision (i.e., C<unpack("f", pack("f", $foo)>) will not in general
3242 If the pattern begins with a C<U>, the resulting string will be treated
3243 as Unicode-encoded. You can force UTF8 encoding on in a string with an
3244 initial C<U0>, and the bytes that follow will be interpreted as Unicode
3245 characters. If you don't want this to happen, you can begin your pattern
3246 with C<C0> (or anything else) to force Perl not to UTF8 encode your
3247 string, and then follow this with a C<U*> somewhere in your pattern.
3251 You must yourself do any alignment or padding by inserting for example
3252 enough C<'x'>es while packing. There is no way to pack() and unpack()
3253 could know where the bytes are going to or coming from. Therefore
3254 C<pack> (and C<unpack>) handle their output and input as flat
3259 A comment in a TEMPLATE starts with C<#> and goes to the end of line.
3263 If TEMPLATE requires more arguments to pack() than actually given, pack()
3264 assumes additional C<""> arguments. If TEMPLATE requires less arguments
3265 to pack() than actually given, extra arguments are ignored.
3271 $foo = pack("CCCC",65,66,67,68);
3273 $foo = pack("C4",65,66,67,68);
3275 $foo = pack("U4",0x24b6,0x24b7,0x24b8,0x24b9);
3276 # same thing with Unicode circled letters
3278 $foo = pack("ccxxcc",65,66,67,68);
3281 # note: the above examples featuring "C" and "c" are true
3282 # only on ASCII and ASCII-derived systems such as ISO Latin 1
3283 # and UTF-8. In EBCDIC the first example would be
3284 # $foo = pack("CCCC",193,194,195,196);
3286 $foo = pack("s2",1,2);
3287 # "\1\0\2\0" on little-endian
3288 # "\0\1\0\2" on big-endian
3290 $foo = pack("a4","abcd","x","y","z");
3293 $foo = pack("aaaa","abcd","x","y","z");
3296 $foo = pack("a14","abcdefg");
3297 # "abcdefg\0\0\0\0\0\0\0"
3299 $foo = pack("i9pl", gmtime);
3300 # a real struct tm (on my system anyway)
3302 $utmp_template = "Z8 Z8 Z16 L";
3303 $utmp = pack($utmp_template, @utmp1);
3304 # a struct utmp (BSDish)
3306 @utmp2 = unpack($utmp_template, $utmp);
3307 # "@utmp1" eq "@utmp2"
3310 unpack("N", pack("B32", substr("0" x 32 . shift, -32)));
3313 $foo = pack('sx2l', 12, 34);
3314 # short 12, two zero bytes padding, long 34
3315 $bar = pack('s@4l', 12, 34);
3316 # short 12, zero fill to position 4, long 34
3319 The same template may generally also be used in unpack().
3321 =item package NAMESPACE
3325 Declares the compilation unit as being in the given namespace. The scope
3326 of the package declaration is from the declaration itself through the end
3327 of the enclosing block, file, or eval (the same as the C<my> operator).
3328 All further unqualified dynamic identifiers will be in this namespace.
3329 A package statement affects only dynamic variables--including those
3330 you've used C<local> on--but I<not> lexical variables, which are created
3331 with C<my>. Typically it would be the first declaration in a file to
3332 be included by the C<require> or C<use> operator. You can switch into a
3333 package in more than one place; it merely influences which symbol table
3334 is used by the compiler for the rest of that block. You can refer to
3335 variables and filehandles in other packages by prefixing the identifier
3336 with the package name and a double colon: C<$Package::Variable>.
3337 If the package name is null, the C<main> package as assumed. That is,
3338 C<$::sail> is equivalent to C<$main::sail> (as well as to C<$main'sail>,
3339 still seen in older code).
3341 If NAMESPACE is omitted, then there is no current package, and all
3342 identifiers must be fully qualified or lexicals. This is stricter
3343 than C<use strict>, since it also extends to function names.
3345 See L<perlmod/"Packages"> for more information about packages, modules,
3346 and classes. See L<perlsub> for other scoping issues.
3348 =item pipe READHANDLE,WRITEHANDLE
3350 Opens a pair of connected pipes like the corresponding system call.
3351 Note that if you set up a loop of piped processes, deadlock can occur
3352 unless you are very careful. In addition, note that Perl's pipes use
3353 stdio buffering, so you may need to set C<$|> to flush your WRITEHANDLE
3354 after each command, depending on the application.
3356 See L<IPC::Open2>, L<IPC::Open3>, and L<perlipc/"Bidirectional Communication">
3357 for examples of such things.
3359 On systems that support a close-on-exec flag on files, the flag will be set
3360 for the newly opened file descriptors as determined by the value of $^F.
3367 Pops and returns the last value of the array, shortening the array by
3368 one element. Has an effect similar to
3372 If there are no elements in the array, returns the undefined value
3373 (although this may happen at other times as well). If ARRAY is
3374 omitted, pops the C<@ARGV> array in the main program, and the C<@_>
3375 array in subroutines, just like C<shift>.
3381 Returns the offset of where the last C<m//g> search left off for the variable
3382 in question (C<$_> is used when the variable is not specified). May be
3383 modified to change that offset. Such modification will also influence
3384 the C<\G> zero-width assertion in regular expressions. See L<perlre> and
3387 =item print FILEHANDLE LIST
3393 Prints a string or a list of strings. Returns true if successful.
3394 FILEHANDLE may be a scalar variable name, in which case the variable
3395 contains the name of or a reference to the filehandle, thus introducing
3396 one level of indirection. (NOTE: If FILEHANDLE is a variable and
3397 the next token is a term, it may be misinterpreted as an operator
3398 unless you interpose a C<+> or put parentheses around the arguments.)
3399 If FILEHANDLE is omitted, prints by default to standard output (or
3400 to the last selected output channel--see L</select>). If LIST is
3401 also omitted, prints C<$_> to the currently selected output channel.
3402 To set the default output channel to something other than STDOUT
3403 use the select operation. The current value of C<$,> (if any) is
3404 printed between each LIST item. The current value of C<$\> (if
3405 any) is printed after the entire LIST has been printed. Because
3406 print takes a LIST, anything in the LIST is evaluated in list
3407 context, and any subroutine that you call will have one or more of
3408 its expressions evaluated in list context. Also be careful not to
3409 follow the print keyword with a left parenthesis unless you want
3410 the corresponding right parenthesis to terminate the arguments to
3411 the print--interpose a C<+> or put parentheses around all the
3414 Note that if you're storing FILEHANDLES in an array or other expression,
3415 you will have to use a block returning its value instead:
3417 print { $files[$i] } "stuff\n";
3418 print { $OK ? STDOUT : STDERR } "stuff\n";
3420 =item printf FILEHANDLE FORMAT, LIST
3422 =item printf FORMAT, LIST
3424 Equivalent to C<print FILEHANDLE sprintf(FORMAT, LIST)>, except that C<$\>
3425 (the output record separator) is not appended. The first argument
3426 of the list will be interpreted as the C<printf> format. If C<use locale> is
3427 in effect, the character used for the decimal point in formatted real numbers
3428 is affected by the LC_NUMERIC locale. See L<perllocale>.
3430 Don't fall into the trap of using a C<printf> when a simple
3431 C<print> would do. The C<print> is more efficient and less
3434 =item prototype FUNCTION
3436 Returns the prototype of a function as a string (or C<undef> if the
3437 function has no prototype). FUNCTION is a reference to, or the name of,
3438 the function whose prototype you want to retrieve.
3440 If FUNCTION is a string starting with C<CORE::>, the rest is taken as a
3441 name for Perl builtin. If the builtin is not I<overridable> (such as
3442 C<qw//>) or its arguments cannot be expressed by a prototype (such as
3443 C<system>) returns C<undef> because the builtin does not really behave
3444 like a Perl function. Otherwise, the string describing the equivalent
3445 prototype is returned.
3447 =item push ARRAY,LIST
3449 Treats ARRAY as a stack, and pushes the values of LIST
3450 onto the end of ARRAY. The length of ARRAY increases by the length of
3451 LIST. Has the same effect as
3454 $ARRAY[++$#ARRAY] = $value;
3457 but is more efficient. Returns the new number of elements in the array.
3469 Generalized quotes. See L<perlop/"Regexp Quote-Like Operators">.
3471 =item quotemeta EXPR
3475 Returns the value of EXPR with all non-"word"
3476 characters backslashed. (That is, all characters not matching
3477 C</[A-Za-z_0-9]/> will be preceded by a backslash in the
3478 returned string, regardless of any locale settings.)
3479 This is the internal function implementing
3480 the C<\Q> escape in double-quoted strings.
3482 If EXPR is omitted, uses C<$_>.
3488 Returns a random fractional number greater than or equal to C<0> and less
3489 than the value of EXPR. (EXPR should be positive.) If EXPR is
3490 omitted, the value C<1> is used. Automatically calls C<srand> unless
3491 C<srand> has already been called. See also C<srand>.
3493 (Note: If your rand function consistently returns numbers that are too
3494 large or too small, then your version of Perl was probably compiled
3495 with the wrong number of RANDBITS.)
3497 =item read FILEHANDLE,SCALAR,LENGTH,OFFSET
3499 =item read FILEHANDLE,SCALAR,LENGTH
3501 Attempts to read LENGTH bytes of data into variable SCALAR from the
3502 specified FILEHANDLE. Returns the number of bytes actually read, C<0>
3503 at end of file, or undef if there was an error. SCALAR will be grown
3504 or shrunk to the length actually read. If SCALAR needs growing, the
3505 new bytes will be zero bytes. An OFFSET may be specified to place
3506 the read data into some other place in SCALAR than the beginning.
3507 The call is actually implemented in terms of stdio's fread(3) call.
3508 To get a true read(2) system call, see C<sysread>.
3510 =item readdir DIRHANDLE
3512 Returns the next directory entry for a directory opened by C<opendir>.
3513 If used in list context, returns all the rest of the entries in the
3514 directory. If there are no more entries, returns an undefined value in
3515 scalar context or a null list in list context.
3517 If you're planning to filetest the return values out of a C<readdir>, you'd
3518 better prepend the directory in question. Otherwise, because we didn't
3519 C<chdir> there, it would have been testing the wrong file.
3521 opendir(DIR, $some_dir) || die "can't opendir $some_dir: $!";
3522 @dots = grep { /^\./ && -f "$some_dir/$_" } readdir(DIR);
3527 Reads from the filehandle whose typeglob is contained in EXPR. In scalar
3528 context, each call reads and returns the next line, until end-of-file is
3529 reached, whereupon the subsequent call returns undef. In list context,
3530 reads until end-of-file is reached and returns a list of lines. Note that
3531 the notion of "line" used here is however you may have defined it
3532 with C<$/> or C<$INPUT_RECORD_SEPARATOR>). See L<perlvar/"$/">.
3534 When C<$/> is set to C<undef>, when readline() is in scalar
3535 context (i.e. file slurp mode), and when an empty file is read, it
3536 returns C<''> the first time, followed by C<undef> subsequently.
3538 This is the internal function implementing the C<< <EXPR> >>
3539 operator, but you can use it directly. The C<< <EXPR> >>
3540 operator is discussed in more detail in L<perlop/"I/O Operators">.
3543 $line = readline(*STDIN); # same thing
3549 Returns the value of a symbolic link, if symbolic links are
3550 implemented. If not, gives a fatal error. If there is some system
3551 error, returns the undefined value and sets C<$!> (errno). If EXPR is
3552 omitted, uses C<$_>.
3556 EXPR is executed as a system command.
3557 The collected standard output of the command is returned.
3558 In scalar context, it comes back as a single (potentially
3559 multi-line) string. In list context, returns a list of lines
3560 (however you've defined lines with C<$/> or C<$INPUT_RECORD_SEPARATOR>).
3561 This is the internal function implementing the C<qx/EXPR/>
3562 operator, but you can use it directly. The C<qx/EXPR/>
3563 operator is discussed in more detail in L<perlop/"I/O Operators">.
3565 =item recv SOCKET,SCALAR,LENGTH,FLAGS
3567 Receives a message on a socket. Attempts to receive LENGTH bytes of
3568 data into variable SCALAR from the specified SOCKET filehandle. SCALAR
3569 will be grown or shrunk to the length actually read. Takes the same
3570 flags as the system call of the same name. Returns the address of the
3571 sender if SOCKET's protocol supports this; returns an empty string
3572 otherwise. If there's an error, returns the undefined value. This call
3573 is actually implemented in terms of recvfrom(2) system call. See
3574 L<perlipc/"UDP: Message Passing"> for examples.
3580 The C<redo> command restarts the loop block without evaluating the
3581 conditional again. The C<continue> block, if any, is not executed. If
3582 the LABEL is omitted, the command refers to the innermost enclosing
3583 loop. This command is normally used by programs that want to lie to
3584 themselves about what was just input:
3586 # a simpleminded Pascal comment stripper
3587 # (warning: assumes no { or } in strings)
3588 LINE: while (<STDIN>) {
3589 while (s|({.*}.*){.*}|$1 |) {}
3594 if (/}/) { # end of comment?
3603 C<redo> cannot be used to retry a block which returns a value such as
3604 C<eval {}>, C<sub {}> or C<do {}>, and should not be used to exit
3605 a grep() or map() operation.
3607 Note that a block by itself is semantically identical to a loop
3608 that executes once. Thus C<redo> inside such a block will effectively
3609 turn it into a looping construct.
3611 See also L</continue> for an illustration of how C<last>, C<next>, and
3618 Returns a true value if EXPR is a reference, false otherwise. If EXPR
3619 is not specified, C<$_> will be used. The value returned depends on the
3620 type of thing the reference is a reference to.
3621 Builtin types include:
3631 If the referenced object has been blessed into a package, then that package
3632 name is returned instead. You can think of C<ref> as a C<typeof> operator.
3634 if (ref($r) eq "HASH") {
3635 print "r is a reference to a hash.\n";
3638 print "r is not a reference at all.\n";
3640 if (UNIVERSAL::isa($r, "HASH")) { # for subclassing
3641 print "r is a reference to something that isa hash.\n";
3644 See also L<perlref>.
3646 =item rename OLDNAME,NEWNAME
3648 Changes the name of a file; an existing file NEWNAME will be
3649 clobbered. Returns true for success, false otherwise.
3651 Behavior of this function varies wildly depending on your system
3652 implementation. For example, it will usually not work across file system
3653 boundaries, even though the system I<mv> command sometimes compensates
3654 for this. Other restrictions include whether it works on directories,
3655 open files, or pre-existing files. Check L<perlport> and either the
3656 rename(2) manpage or equivalent system documentation for details.
3658 =item require VERSION
3664 Demands some semantics specified by EXPR, or by C<$_> if EXPR is not
3667 If a VERSION is specified as a literal of the form v5.6.1,
3668 demands that the current version of Perl (C<$^V> or $PERL_VERSION) be
3669 at least as recent as that version, at run time. (For compatibility
3670 with older versions of Perl, a numeric argument will also be interpreted
3671 as VERSION.) Compare with L</use>, which can do a similar check at
3674 require v5.6.1; # run time version check
3675 require 5.6.1; # ditto
3676 require 5.005_03; # float version allowed for compatibility
3678 Otherwise, demands that a library file be included if it hasn't already
3679 been included. The file is included via the do-FILE mechanism, which is
3680 essentially just a variety of C<eval>. Has semantics similar to the following
3685 return 1 if $INC{$filename};
3686 my($realfilename,$result);
3688 foreach $prefix (@INC) {
3689 $realfilename = "$prefix/$filename";
3690 if (-f $realfilename) {
3691 $INC{$filename} = $realfilename;
3692 $result = do $realfilename;
3696 die "Can't find $filename in \@INC";
3698 delete $INC{$filename} if $@ || !$result;
3700 die "$filename did not return true value" unless $result;
3704 Note that the file will not be included twice under the same specified
3705 name. The file must return true as the last statement to indicate
3706 successful execution of any initialization code, so it's customary to
3707 end such a file with C<1;> unless you're sure it'll return true
3708 otherwise. But it's better just to put the C<1;>, in case you add more
3711 If EXPR is a bareword, the require assumes a "F<.pm>" extension and
3712 replaces "F<::>" with "F</>" in the filename for you,
3713 to make it easy to load standard modules. This form of loading of
3714 modules does not risk altering your namespace.
3716 In other words, if you try this:
3718 require Foo::Bar; # a splendid bareword
3720 The require function will actually look for the "F<Foo/Bar.pm>" file in the
3721 directories specified in the C<@INC> array.
3723 But if you try this:
3725 $class = 'Foo::Bar';
3726 require $class; # $class is not a bareword
3728 require "Foo::Bar"; # not a bareword because of the ""
3730 The require function will look for the "F<Foo::Bar>" file in the @INC array and
3731 will complain about not finding "F<Foo::Bar>" there. In this case you can do:
3733 eval "require $class";
3735 For a yet-more-powerful import facility, see L</use> and L<perlmod>.
3741 Generally used in a C<continue> block at the end of a loop to clear
3742 variables and reset C<??> searches so that they work again. The
3743 expression is interpreted as a list of single characters (hyphens
3744 allowed for ranges). All variables and arrays beginning with one of
3745 those letters are reset to their pristine state. If the expression is
3746 omitted, one-match searches (C<?pattern?>) are reset to match again. Resets
3747 only variables or searches in the current package. Always returns
3750 reset 'X'; # reset all X variables
3751 reset 'a-z'; # reset lower case variables
3752 reset; # just reset ?one-time? searches
3754 Resetting C<"A-Z"> is not recommended because you'll wipe out your
3755 C<@ARGV> and C<@INC> arrays and your C<%ENV> hash. Resets only package
3756 variables--lexical variables are unaffected, but they clean themselves
3757 up on scope exit anyway, so you'll probably want to use them instead.
3764 Returns from a subroutine, C<eval>, or C<do FILE> with the value
3765 given in EXPR. Evaluation of EXPR may be in list, scalar, or void
3766 context, depending on how the return value will be used, and the context
3767 may vary from one execution to the next (see C<wantarray>). If no EXPR
3768 is given, returns an empty list in list context, the undefined value in
3769 scalar context, and (of course) nothing at all in a void context.
3771 (Note that in the absence of a explicit C<return>, a subroutine, eval,
3772 or do FILE will automatically return the value of the last expression
3777 In list context, returns a list value consisting of the elements
3778 of LIST in the opposite order. In scalar context, concatenates the
3779 elements of LIST and returns a string value with all characters
3780 in the opposite order.
3782 print reverse <>; # line tac, last line first
3784 undef $/; # for efficiency of <>
3785 print scalar reverse <>; # character tac, last line tsrif
3787 This operator is also handy for inverting a hash, although there are some
3788 caveats. If a value is duplicated in the original hash, only one of those
3789 can be represented as a key in the inverted hash. Also, this has to
3790 unwind one hash and build a whole new one, which may take some time
3791 on a large hash, such as from a DBM file.
3793 %by_name = reverse %by_address; # Invert the hash
3795 =item rewinddir DIRHANDLE
3797 Sets the current position to the beginning of the directory for the
3798 C<readdir> routine on DIRHANDLE.
3800 =item rindex STR,SUBSTR,POSITION
3802 =item rindex STR,SUBSTR
3804 Works just like index() except that it returns the position of the LAST
3805 occurrence of SUBSTR in STR. If POSITION is specified, returns the
3806 last occurrence at or before that position.
3808 =item rmdir FILENAME
3812 Deletes the directory specified by FILENAME if that directory is empty. If it
3813 succeeds it returns true, otherwise it returns false and sets C<$!> (errno). If
3814 FILENAME is omitted, uses C<$_>.
3818 The substitution operator. See L<perlop>.
3822 Forces EXPR to be interpreted in scalar context and returns the value
3825 @counts = ( scalar @a, scalar @b, scalar @c );
3827 There is no equivalent operator to force an expression to
3828 be interpolated in list context because in practice, this is never
3829 needed. If you really wanted to do so, however, you could use
3830 the construction C<@{[ (some expression) ]}>, but usually a simple
3831 C<(some expression)> suffices.
3833 Because C<scalar> is unary operator, if you accidentally use for EXPR a
3834 parenthesized list, this behaves as a scalar comma expression, evaluating
3835 all but the last element in void context and returning the final element
3836 evaluated in scalar context. This is seldom what you want.
3838 The following single statement:
3840 print uc(scalar(&foo,$bar)),$baz;
3842 is the moral equivalent of these two:
3845 print(uc($bar),$baz);
3847 See L<perlop> for more details on unary operators and the comma operator.
3849 =item seek FILEHANDLE,POSITION,WHENCE
3851 Sets FILEHANDLE's position, just like the C<fseek> call of C<stdio>.
3852 FILEHANDLE may be an expression whose value gives the name of the
3853 filehandle. The values for WHENCE are C<0> to set the new position to
3854 POSITION, C<1> to set it to the current position plus POSITION, and
3855 C<2> to set it to EOF plus POSITION (typically negative). For WHENCE
3856 you may use the constants C<SEEK_SET>, C<SEEK_CUR>, and C<SEEK_END>
3857 (start of the file, current position, end of the file) from the Fcntl
3858 module. Returns C<1> upon success, C<0> otherwise.
3860 If you want to position file for C<sysread> or C<syswrite>, don't use
3861 C<seek>--buffering makes its effect on the file's system position
3862 unpredictable and non-portable. Use C<sysseek> instead.
3864 Due to the rules and rigors of ANSI C, on some systems you have to do a
3865 seek whenever you switch between reading and writing. Amongst other
3866 things, this may have the effect of calling stdio's clearerr(3).
3867 A WHENCE of C<1> (C<SEEK_CUR>) is useful for not moving the file position:
3871 This is also useful for applications emulating C<tail -f>. Once you hit
3872 EOF on your read, and then sleep for a while, you might have to stick in a
3873 seek() to reset things. The C<seek> doesn't change the current position,
3874 but it I<does> clear the end-of-file condition on the handle, so that the
3875 next C<< <FILE> >> makes Perl try again to read something. We hope.
3877 If that doesn't work (some stdios are particularly cantankerous), then
3878 you may need something more like this:
3881 for ($curpos = tell(FILE); $_ = <FILE>;
3882 $curpos = tell(FILE)) {
3883 # search for some stuff and put it into files
3885 sleep($for_a_while);
3886 seek(FILE, $curpos, 0);
3889 =item seekdir DIRHANDLE,POS
3891 Sets the current position for the C<readdir> routine on DIRHANDLE. POS
3892 must be a value returned by C<telldir>. Has the same caveats about
3893 possible directory compaction as the corresponding system library
3896 =item select FILEHANDLE
3900 Returns the currently selected filehandle. Sets the current default
3901 filehandle for output, if FILEHANDLE is supplied. This has two
3902 effects: first, a C<write> or a C<print> without a filehandle will
3903 default to this FILEHANDLE. Second, references to variables related to
3904 output will refer to this output channel. For example, if you have to
3905 set the top of form format for more than one output channel, you might
3913 FILEHANDLE may be an expression whose value gives the name of the
3914 actual filehandle. Thus:
3916 $oldfh = select(STDERR); $| = 1; select($oldfh);
3918 Some programmers may prefer to think of filehandles as objects with
3919 methods, preferring to write the last example as:
3922 STDERR->autoflush(1);
3924 =item select RBITS,WBITS,EBITS,TIMEOUT
3926 This calls the select(2) system call with the bit masks specified, which
3927 can be constructed using C<fileno> and C<vec>, along these lines:
3929 $rin = $win = $ein = '';
3930 vec($rin,fileno(STDIN),1) = 1;
3931 vec($win,fileno(STDOUT),1) = 1;
3934 If you want to select on many filehandles you might wish to write a
3938 my(@fhlist) = split(' ',$_[0]);
3941 vec($bits,fileno($_),1) = 1;
3945 $rin = fhbits('STDIN TTY SOCK');
3949 ($nfound,$timeleft) =
3950 select($rout=$rin, $wout=$win, $eout=$ein, $timeout);
3952 or to block until something becomes ready just do this
3954 $nfound = select($rout=$rin, $wout=$win, $eout=$ein, undef);
3956 Most systems do not bother to return anything useful in $timeleft, so
3957 calling select() in scalar context just returns $nfound.
3959 Any of the bit masks can also be undef. The timeout, if specified, is
3960 in seconds, which may be fractional. Note: not all implementations are
3961 capable of returning the$timeleft. If not, they always return
3962 $timeleft equal to the supplied $timeout.
3964 You can effect a sleep of 250 milliseconds this way:
3966 select(undef, undef, undef, 0.25);
3968 B<WARNING>: One should not attempt to mix buffered I/O (like C<read>
3969 or <FH>) with C<select>, except as permitted by POSIX, and even
3970 then only on POSIX systems. You have to use C<sysread> instead.
3972 =item semctl ID,SEMNUM,CMD,ARG
3974 Calls the System V IPC function C<semctl>. You'll probably have to say
3978 first to get the correct constant definitions. If CMD is IPC_STAT or
3979 GETALL, then ARG must be a variable which will hold the returned
3980 semid_ds structure or semaphore value array. Returns like C<ioctl>:
3981 the undefined value for error, "C<0 but true>" for zero, or the actual
3982 return value otherwise. The ARG must consist of a vector of native
3983 short integers, which may be created with C<pack("s!",(0)x$nsem)>.
3984 See also L<perlipc/"SysV IPC">, C<IPC::SysV>, C<IPC::Semaphore>
3987 =item semget KEY,NSEMS,FLAGS
3989 Calls the System V IPC function semget. Returns the semaphore id, or
3990 the undefined value if there is an error. See also
3991 L<perlipc/"SysV IPC">, C<IPC::SysV>, C<IPC::SysV::Semaphore>
3994 =item semop KEY,OPSTRING
3996 Calls the System V IPC function semop to perform semaphore operations
3997 such as signaling and waiting. OPSTRING must be a packed array of
3998 semop structures. Each semop structure can be generated with
3999 C<pack("sss", $semnum, $semop, $semflag)>. The number of semaphore
4000 operations is implied by the length of OPSTRING. Returns true if
4001 successful, or false if there is an error. As an example, the
4002 following code waits on semaphore $semnum of semaphore id $semid:
4004 $semop = pack("sss", $semnum, -1, 0);
4005 die "Semaphore trouble: $!\n" unless semop($semid, $semop);
4007 To signal the semaphore, replace C<-1> with C<1>. See also
4008 L<perlipc/"SysV IPC">, C<IPC::SysV>, and C<IPC::SysV::Semaphore>
4011 =item send SOCKET,MSG,FLAGS,TO
4013 =item send SOCKET,MSG,FLAGS
4015 Sends a message on a socket. Takes the same flags as the system call
4016 of the same name. On unconnected sockets you must specify a
4017 destination to send TO, in which case it does a C C<sendto>. Returns
4018 the number of characters sent, or the undefined value if there is an
4019 error. The C system call sendmsg(2) is currently unimplemented.
4020 See L<perlipc/"UDP: Message Passing"> for examples.
4022 =item setpgrp PID,PGRP
4024 Sets the current process group for the specified PID, C<0> for the current
4025 process. Will produce a fatal error if used on a machine that doesn't
4026 implement POSIX setpgid(2) or BSD setpgrp(2). If the arguments are omitted,
4027 it defaults to C<0,0>. Note that the BSD 4.2 version of C<setpgrp> does not
4028 accept any arguments, so only C<setpgrp(0,0)> is portable. See also
4031 =item setpriority WHICH,WHO,PRIORITY
4033 Sets the current priority for a process, a process group, or a user.
4034 (See setpriority(2).) Will produce a fatal error if used on a machine
4035 that doesn't implement setpriority(2).
4037 =item setsockopt SOCKET,LEVEL,OPTNAME,OPTVAL
4039 Sets the socket option requested. Returns undefined if there is an
4040 error. OPTVAL may be specified as C<undef> if you don't want to pass an
4047 Shifts the first value of the array off and returns it, shortening the
4048 array by 1 and moving everything down. If there are no elements in the
4049 array, returns the undefined value. If ARRAY is omitted, shifts the
4050 C<@_> array within the lexical scope of subroutines and formats, and the
4051 C<@ARGV> array at file scopes or within the lexical scopes established by
4052 the C<eval ''>, C<BEGIN {}>, C<INIT {}>, C<CHECK {}>, and C<END {}>
4055 See also C<unshift>, C<push>, and C<pop>. C<shift> and C<unshift> do the
4056 same thing to the left end of an array that C<pop> and C<push> do to the
4059 =item shmctl ID,CMD,ARG
4061 Calls the System V IPC function shmctl. You'll probably have to say
4065 first to get the correct constant definitions. If CMD is C<IPC_STAT>,
4066 then ARG must be a variable which will hold the returned C<shmid_ds>
4067 structure. Returns like ioctl: the undefined value for error, "C<0> but
4068 true" for zero, or the actual return value otherwise.
4069 See also L<perlipc/"SysV IPC"> and C<IPC::SysV> documentation.
4071 =item shmget KEY,SIZE,FLAGS
4073 Calls the System V IPC function shmget. Returns the shared memory
4074 segment id, or the undefined value if there is an error.
4075 See also L<perlipc/"SysV IPC"> and C<IPC::SysV> documentation.
4077 =item shmread ID,VAR,POS,SIZE
4079 =item shmwrite ID,STRING,POS,SIZE
4081 Reads or writes the System V shared memory segment ID starting at
4082 position POS for size SIZE by attaching to it, copying in/out, and
4083 detaching from it. When reading, VAR must be a variable that will
4084 hold the data read. When writing, if STRING is too long, only SIZE
4085 bytes are used; if STRING is too short, nulls are written to fill out
4086 SIZE bytes. Return true if successful, or false if there is an error.
4087 shmread() taints the variable. See also L<perlipc/"SysV IPC">,
4088 C<IPC::SysV> documentation, and the C<IPC::Shareable> module from CPAN.
4090 =item shutdown SOCKET,HOW
4092 Shuts down a socket connection in the manner indicated by HOW, which
4093 has the same interpretation as in the system call of the same name.
4095 shutdown(SOCKET, 0); # I/we have stopped reading data
4096 shutdown(SOCKET, 1); # I/we have stopped writing data
4097 shutdown(SOCKET, 2); # I/we have stopped using this socket
4099 This is useful with sockets when you want to tell the other
4100 side you're done writing but not done reading, or vice versa.
4101 It's also a more insistent form of close because it also
4102 disables the file descriptor in any forked copies in other
4109 Returns the sine of EXPR (expressed in radians). If EXPR is omitted,
4110 returns sine of C<$_>.
4112 For the inverse sine operation, you may use the C<Math::Trig::asin>
4113 function, or use this relation:
4115 sub asin { atan2($_[0], sqrt(1 - $_[0] * $_[0])) }
4121 Causes the script to sleep for EXPR seconds, or forever if no EXPR.
4122 May be interrupted if the process receives a signal such as C<SIGALRM>.
4123 Returns the number of seconds actually slept. You probably cannot
4124 mix C<alarm> and C<sleep> calls, because C<sleep> is often implemented
4127 On some older systems, it may sleep up to a full second less than what
4128 you requested, depending on how it counts seconds. Most modern systems
4129 always sleep the full amount. They may appear to sleep longer than that,
4130 however, because your process might not be scheduled right away in a
4131 busy multitasking system.
4133 For delays of finer granularity than one second, you may use Perl's
4134 C<syscall> interface to access setitimer(2) if your system supports
4135 it, or else see L</select> above. The Time::HiRes module from CPAN
4138 See also the POSIX module's C<pause> function.
4140 =item socket SOCKET,DOMAIN,TYPE,PROTOCOL
4142 Opens a socket of the specified kind and attaches it to filehandle
4143 SOCKET. DOMAIN, TYPE, and PROTOCOL are specified the same as for
4144 the system call of the same name. You should C<use Socket> first
4145 to get the proper definitions imported. See the examples in
4146 L<perlipc/"Sockets: Client/Server Communication">.
4148 On systems that support a close-on-exec flag on files, the flag will
4149 be set for the newly opened file descriptor, as determined by the
4150 value of $^F. See L<perlvar/$^F>.
4152 =item socketpair SOCKET1,SOCKET2,DOMAIN,TYPE,PROTOCOL
4154 Creates an unnamed pair of sockets in the specified domain, of the
4155 specified type. DOMAIN, TYPE, and PROTOCOL are specified the same as
4156 for the system call of the same name. If unimplemented, yields a fatal
4157 error. Returns true if successful.
4159 On systems that support a close-on-exec flag on files, the flag will
4160 be set for the newly opened file descriptors, as determined by the value
4161 of $^F. See L<perlvar/$^F>.
4163 Some systems defined C<pipe> in terms of C<socketpair>, in which a call
4164 to C<pipe(Rdr, Wtr)> is essentially:
4167 socketpair(Rdr, Wtr, AF_UNIX, SOCK_STREAM, PF_UNSPEC);
4168 shutdown(Rdr, 1); # no more writing for reader
4169 shutdown(Wtr, 0); # no more reading for writer
4171 See L<perlipc> for an example of socketpair use.
4173 =item sort SUBNAME LIST
4175 =item sort BLOCK LIST
4179 Sorts the LIST and returns the sorted list value. If SUBNAME or BLOCK
4180 is omitted, C<sort>s in standard string comparison order. If SUBNAME is
4181 specified, it gives the name of a subroutine that returns an integer
4182 less than, equal to, or greater than C<0>, depending on how the elements
4183 of the list are to be ordered. (The C<< <=> >> and C<cmp>
4184 operators are extremely useful in such routines.) SUBNAME may be a
4185 scalar variable name (unsubscripted), in which case the value provides
4186 the name of (or a reference to) the actual subroutine to use. In place
4187 of a SUBNAME, you can provide a BLOCK as an anonymous, in-line sort
4190 If the subroutine's prototype is C<($$)>, the elements to be compared
4191 are passed by reference in C<@_>, as for a normal subroutine. This is
4192 slower than unprototyped subroutines, where the elements to be
4193 compared are passed into the subroutine
4194 as the package global variables $a and $b (see example below). Note that
4195 in the latter case, it is usually counter-productive to declare $a and
4198 In either case, the subroutine may not be recursive. The values to be
4199 compared are always passed by reference, so don't modify them.
4201 You also cannot exit out of the sort block or subroutine using any of the
4202 loop control operators described in L<perlsyn> or with C<goto>.
4204 When C<use locale> is in effect, C<sort LIST> sorts LIST according to the
4205 current collation locale. See L<perllocale>.
4210 @articles = sort @files;
4212 # same thing, but with explicit sort routine
4213 @articles = sort {$a cmp $b} @files;
4215 # now case-insensitively
4216 @articles = sort {uc($a) cmp uc($b)} @files;
4218 # same thing in reversed order
4219 @articles = sort {$b cmp $a} @files;
4221 # sort numerically ascending
4222 @articles = sort {$a <=> $b} @files;
4224 # sort numerically descending
4225 @articles = sort {$b <=> $a} @files;
4227 # this sorts the %age hash by value instead of key
4228 # using an in-line function
4229 @eldest = sort { $age{$b} <=> $age{$a} } keys %age;
4231 # sort using explicit subroutine name
4233 $age{$a} <=> $age{$b}; # presuming numeric
4235 @sortedclass = sort byage @class;
4237 sub backwards { $b cmp $a }
4238 @harry = qw(dog cat x Cain Abel);
4239 @george = qw(gone chased yz Punished Axed);
4241 # prints AbelCaincatdogx
4242 print sort backwards @harry;
4243 # prints xdogcatCainAbel
4244 print sort @george, 'to', @harry;
4245 # prints AbelAxedCainPunishedcatchaseddoggonetoxyz
4247 # inefficiently sort by descending numeric compare using
4248 # the first integer after the first = sign, or the
4249 # whole record case-insensitively otherwise
4252 ($b =~ /=(\d+)/)[0] <=> ($a =~ /=(\d+)/)[0]
4257 # same thing, but much more efficiently;
4258 # we'll build auxiliary indices instead
4262 push @nums, /=(\d+)/;
4267 $nums[$b] <=> $nums[$a]
4269 $caps[$a] cmp $caps[$b]
4273 # same thing, but without any temps
4274 @new = map { $_->[0] }
4275 sort { $b->[1] <=> $a->[1]
4278 } map { [$_, /=(\d+)/, uc($_)] } @old;
4280 # using a prototype allows you to use any comparison subroutine
4281 # as a sort subroutine (including other package's subroutines)
4283 sub backwards ($$) { $_[1] cmp $_[0]; } # $a and $b are not set here
4286 @new = sort other::backwards @old;
4288 If you're using strict, you I<must not> declare $a
4289 and $b as lexicals. They are package globals. That means
4290 if you're in the C<main> package and type
4292 @articles = sort {$b <=> $a} @files;
4294 then C<$a> and C<$b> are C<$main::a> and C<$main::b> (or C<$::a> and C<$::b>),
4295 but if you're in the C<FooPack> package, it's the same as typing
4297 @articles = sort {$FooPack::b <=> $FooPack::a} @files;
4299 The comparison function is required to behave. If it returns
4300 inconsistent results (sometimes saying C<$x[1]> is less than C<$x[2]> and
4301 sometimes saying the opposite, for example) the results are not
4304 =item splice ARRAY,OFFSET,LENGTH,LIST
4306 =item splice ARRAY,OFFSET,LENGTH
4308 =item splice ARRAY,OFFSET
4312 Removes the elements designated by OFFSET and LENGTH from an array, and
4313 replaces them with the elements of LIST, if any. In list context,
4314 returns the elements removed from the array. In scalar context,
4315 returns the last element removed, or C<undef> if no elements are
4316 removed. The array grows or shrinks as necessary.
4317 If OFFSET is negative then it starts that far from the end of the array.
4318 If LENGTH is omitted, removes everything from OFFSET onward.
4319 If LENGTH is negative, leaves that many elements off the end of the array.
4320 If both OFFSET and LENGTH are omitted, removes everything.
4322 The following equivalences hold (assuming C<$[ == 0>):
4324 push(@a,$x,$y) splice(@a,@a,0,$x,$y)
4325 pop(@a) splice(@a,-1)
4326 shift(@a) splice(@a,0,1)
4327 unshift(@a,$x,$y) splice(@a,0,0,$x,$y)
4328 $a[$x] = $y splice(@a,$x,1,$y)
4330 Example, assuming array lengths are passed before arrays:
4332 sub aeq { # compare two list values
4333 my(@a) = splice(@_,0,shift);
4334 my(@b) = splice(@_,0,shift);
4335 return 0 unless @a == @b; # same len?
4337 return 0 if pop(@a) ne pop(@b);
4341 if (&aeq($len,@foo[1..$len],0+@bar,@bar)) { ... }
4343 =item split /PATTERN/,EXPR,LIMIT
4345 =item split /PATTERN/,EXPR
4347 =item split /PATTERN/
4351 Splits a string into a list of strings and returns that list. By default,
4352 empty leading fields are preserved, and empty trailing ones are deleted.
4354 In scalar context, returns the number of fields found and splits into
4355 the C<@_> array. Use of split in scalar context is deprecated, however,
4356 because it clobbers your subroutine arguments.
4358 If EXPR is omitted, splits the C<$_> string. If PATTERN is also omitted,
4359 splits on whitespace (after skipping any leading whitespace). Anything
4360 matching PATTERN is taken to be a delimiter separating the fields. (Note
4361 that the delimiter may be longer than one character.)
4363 If LIMIT is specified and positive, splits into no more than that
4364 many fields (though it may split into fewer). If LIMIT is unspecified
4365 or zero, trailing null fields are stripped (which potential users
4366 of C<pop> would do well to remember). If LIMIT is negative, it is
4367 treated as if an arbitrarily large LIMIT had been specified.
4369 A pattern matching the null string (not to be confused with
4370 a null pattern C<//>, which is just one member of the set of patterns
4371 matching a null string) will split the value of EXPR into separate
4372 characters at each point it matches that way. For example:
4374 print join(':', split(/ */, 'hi there'));
4376 produces the output 'h:i:t:h:e:r:e'.
4378 Empty leading (or trailing) fields are produced when there positive width
4379 matches at the beginning (or end) of the string; a zero-width match at the
4380 beginning (or end) of the string does not produce an empty field. For
4383 print join(':', split(/(?=\w)/, 'hi there!'));
4385 produces the output 'h:i :t:h:e:r:e!'.
4387 The LIMIT parameter can be used to split a line partially
4389 ($login, $passwd, $remainder) = split(/:/, $_, 3);
4391 When assigning to a list, if LIMIT is omitted, Perl supplies a LIMIT
4392 one larger than the number of variables in the list, to avoid
4393 unnecessary work. For the list above LIMIT would have been 4 by
4394 default. In time critical applications it behooves you not to split
4395 into more fields than you really need.
4397 If the PATTERN contains parentheses, additional list elements are
4398 created from each matching substring in the delimiter.
4400 split(/([,-])/, "1-10,20", 3);
4402 produces the list value
4404 (1, '-', 10, ',', 20)
4406 If you had the entire header of a normal Unix email message in $header,
4407 you could split it up into fields and their values this way:
4409 $header =~ s/\n\s+/ /g; # fix continuation lines
4410 %hdrs = (UNIX_FROM => split /^(\S*?):\s*/m, $header);
4412 The pattern C</PATTERN/> may be replaced with an expression to specify
4413 patterns that vary at runtime. (To do runtime compilation only once,
4414 use C</$variable/o>.)
4416 As a special case, specifying a PATTERN of space (C<' '>) will split on
4417 white space just as C<split> with no arguments does. Thus, C<split(' ')> can
4418 be used to emulate B<awk>'s default behavior, whereas C<split(/ /)>
4419 will give you as many null initial fields as there are leading spaces.
4420 A C<split> on C</\s+/> is like a C<split(' ')> except that any leading
4421 whitespace produces a null first field. A C<split> with no arguments
4422 really does a C<split(' ', $_)> internally.
4424 A PATTERN of C</^/> is treated as if it were C</^/m>, since it isn't
4429 open(PASSWD, '/etc/passwd');
4432 ($login, $passwd, $uid, $gid,
4433 $gcos, $home, $shell) = split(/:/);
4438 =item sprintf FORMAT, LIST
4440 Returns a string formatted by the usual C<printf> conventions of the C
4441 library function C<sprintf>. See below for more details
4442 and see L<sprintf(3)> or L<printf(3)> on your system for an explanation of
4443 the general principles.
4447 # Format number with up to 8 leading zeroes
4448 $result = sprintf("%08d", $number);
4450 # Round number to 3 digits after decimal point
4451 $rounded = sprintf("%.3f", $number);
4453 Perl does its own C<sprintf> formatting--it emulates the C
4454 function C<sprintf>, but it doesn't use it (except for floating-point
4455 numbers, and even then only the standard modifiers are allowed). As a
4456 result, any non-standard extensions in your local C<sprintf> are not
4457 available from Perl.
4459 Unlike C<printf>, C<sprintf> does not do what you probably mean when you
4460 pass it an array as your first argument. The array is given scalar context,
4461 and instead of using the 0th element of the array as the format, Perl will
4462 use the count of elements in the array as the format, which is almost never
4465 Perl's C<sprintf> permits the following universally-known conversions:
4468 %c a character with the given number
4470 %d a signed integer, in decimal
4471 %u an unsigned integer, in decimal
4472 %o an unsigned integer, in octal
4473 %x an unsigned integer, in hexadecimal
4474 %e a floating-point number, in scientific notation
4475 %f a floating-point number, in fixed decimal notation
4476 %g a floating-point number, in %e or %f notation
4478 In addition, Perl permits the following widely-supported conversions:
4480 %X like %x, but using upper-case letters
4481 %E like %e, but using an upper-case "E"
4482 %G like %g, but with an upper-case "E" (if applicable)
4483 %b an unsigned integer, in binary
4484 %p a pointer (outputs the Perl value's address in hexadecimal)
4485 %n special: *stores* the number of characters output so far
4486 into the next variable in the parameter list
4488 Finally, for backward (and we do mean "backward") compatibility, Perl
4489 permits these unnecessary but widely-supported conversions:
4492 %D a synonym for %ld
4493 %U a synonym for %lu
4494 %O a synonym for %lo
4497 Note that the number of exponent digits in the scientific notation by
4498 C<%e>, C<%E>, C<%g> and C<%G> for numbers with the modulus of the
4499 exponent less than 100 is system-dependent: it may be three or less
4500 (zero-padded as necessary). In other words, 1.23 times ten to the
4501 99th may be either "1.23e99" or "1.23e099".
4503 Perl permits the following universally-known flags between the C<%>
4504 and the conversion letter:
4506 space prefix positive number with a space
4507 + prefix positive number with a plus sign
4508 - left-justify within the field
4509 0 use zeros, not spaces, to right-justify
4510 # prefix non-zero octal with "0", non-zero hex with "0x"
4511 number minimum field width
4512 .number "precision": digits after decimal point for
4513 floating-point, max length for string, minimum length
4515 l interpret integer as C type "long" or "unsigned long"
4516 h interpret integer as C type "short" or "unsigned short"
4517 If no flags, interpret integer as C type "int" or "unsigned"
4519 Perl supports parameter ordering, in other words, fetching the
4520 parameters in some explicitly specified "random" ordering as opposed
4521 to the default implicit sequential ordering. The syntax is, instead
4522 of the C<%> and C<*>, to use C<%>I<digits>C<$> and C<*>I<digits>C<$>,
4523 where the I<digits> is the wanted index, from one upwards. For example:
4525 printf "%2\$d %1\$d\n", 12, 34; # will print "34 12\n"
4526 printf "%*2\$d\n", 12, 3; # will print " 12\n"
4528 Note that using the reordering syntax does not interfere with the usual
4529 implicit sequential fetching of the parameters:
4531 printf "%2\$d %d\n", 12, 34; # will print "34 12\n"
4532 printf "%2\$d %d %d\n", 12, 34; # will print "34 12 34\n"
4533 printf "%3\$d %d %d\n", 12, 34, 56; # will print "56 12 34\n"
4534 printf "%2\$*3\$d %d\n", 12, 34, 3; # will print " 34 12\n"
4535 printf "%*3\$2\$d %d\n", 12, 34, 3; # will print " 34 12\n"
4537 There are also two Perl-specific flags:
4539 V interpret integer as Perl's standard integer type
4540 v interpret string as a vector of integers, output as
4541 numbers separated either by dots, or by an arbitrary
4542 string received from the argument list when the flag
4545 Where a number would appear in the flags, an asterisk (C<*>) may be
4546 used instead, in which case Perl uses the next item in the parameter
4547 list as the given number (that is, as the field width or precision).
4548 If a field width obtained through C<*> is negative, it has the same
4549 effect as the C<-> flag: left-justification.
4551 The C<v> flag is useful for displaying ordinal values of characters
4552 in arbitrary strings:
4554 printf "version is v%vd\n", $^V; # Perl's version
4555 printf "address is %*vX\n", ":", $addr; # IPv6 address
4556 printf "bits are %*vb\n", " ", $bits; # random bitstring
4558 If C<use locale> is in effect, the character used for the decimal
4559 point in formatted real numbers is affected by the LC_NUMERIC locale.
4562 If Perl understands "quads" (64-bit integers) (this requires
4563 either that the platform natively support quads or that Perl
4564 be specifically compiled to support quads), the characters
4568 print quads, and they may optionally be preceded by
4576 You can find out whether your Perl supports quads via L<Config>:
4579 ($Config{use64bitint} eq 'define' || $Config{longsize} == 8) &&
4582 If Perl understands "long doubles" (this requires that the platform
4583 support long doubles), the flags
4587 may optionally be preceded by
4595 You can find out whether your Perl supports long doubles via L<Config>:
4598 $Config{d_longdbl} eq 'define' && print "long doubles\n";
4604 Return the square root of EXPR. If EXPR is omitted, returns square
4605 root of C<$_>. Only works on non-negative operands, unless you've
4606 loaded the standard Math::Complex module.
4609 print sqrt(-2); # prints 1.4142135623731i
4615 Sets the random number seed for the C<rand> operator. If EXPR is
4616 omitted, uses a semi-random value supplied by the kernel (if it supports
4617 the F</dev/urandom> device) or based on the current time and process
4618 ID, among other things. In versions of Perl prior to 5.004 the default
4619 seed was just the current C<time>. This isn't a particularly good seed,
4620 so many old programs supply their own seed value (often C<time ^ $$> or
4621 C<time ^ ($$ + ($$ << 15))>), but that isn't necessary any more.
4623 In fact, it's usually not necessary to call C<srand> at all, because if
4624 it is not called explicitly, it is called implicitly at the first use of
4625 the C<rand> operator. However, this was not the case in version of Perl
4626 before 5.004, so if your script will run under older Perl versions, it
4627 should call C<srand>.
4629 Note that you need something much more random than the default seed for
4630 cryptographic purposes. Checksumming the compressed output of one or more
4631 rapidly changing operating system status programs is the usual method. For
4634 srand (time ^ $$ ^ unpack "%L*", `ps axww | gzip`);
4636 If you're particularly concerned with this, see the C<Math::TrulyRandom>
4639 Do I<not> call C<srand> multiple times in your program unless you know
4640 exactly what you're doing and why you're doing it. The point of the
4641 function is to "seed" the C<rand> function so that C<rand> can produce
4642 a different sequence each time you run your program. Just do it once at the
4643 top of your program, or you I<won't> get random numbers out of C<rand>!
4645 Frequently called programs (like CGI scripts) that simply use
4649 for a seed can fall prey to the mathematical property that
4653 one-third of the time. So don't do that.
4655 =item stat FILEHANDLE
4661 Returns a 13-element list giving the status info for a file, either
4662 the file opened via FILEHANDLE, or named by EXPR. If EXPR is omitted,
4663 it stats C<$_>. Returns a null list if the stat fails. Typically used
4666 ($dev,$ino,$mode,$nlink,$uid,$gid,$rdev,$size,
4667 $atime,$mtime,$ctime,$blksize,$blocks)
4670 Not all fields are supported on all filesystem types. Here are the
4671 meaning of the fields:
4673 0 dev device number of filesystem
4675 2 mode file mode (type and permissions)
4676 3 nlink number of (hard) links to the file
4677 4 uid numeric user ID of file's owner
4678 5 gid numeric group ID of file's owner
4679 6 rdev the device identifier (special files only)
4680 7 size total size of file, in bytes
4681 8 atime last access time in seconds since the epoch
4682 9 mtime last modify time in seconds since the epoch
4683 10 ctime inode change time (NOT creation time!) in seconds since the epoch
4684 11 blksize preferred block size for file system I/O
4685 12 blocks actual number of blocks allocated
4687 (The epoch was at 00:00 January 1, 1970 GMT.)
4689 If stat is passed the special filehandle consisting of an underline, no
4690 stat is done, but the current contents of the stat structure from the
4691 last stat or filetest are returned. Example:
4693 if (-x $file && (($d) = stat(_)) && $d < 0) {
4694 print "$file is executable NFS file\n";
4697 (This works on machines only for which the device number is negative
4700 Because the mode contains both the file type and its permissions, you
4701 should mask off the file type portion and (s)printf using a C<"%o">
4702 if you want to see the real permissions.
4704 $mode = (stat($filename))[2];
4705 printf "Permissions are %04o\n", $mode & 07777;
4707 In scalar context, C<stat> returns a boolean value indicating success
4708 or failure, and, if successful, sets the information associated with
4709 the special filehandle C<_>.
4711 The File::stat module provides a convenient, by-name access mechanism:
4714 $sb = stat($filename);
4715 printf "File is %s, size is %s, perm %04o, mtime %s\n",
4716 $filename, $sb->size, $sb->mode & 07777,
4717 scalar localtime $sb->mtime;
4719 You can import symbolic mode constants (C<S_IF*>) and functions
4720 (C<S_IS*>) from the Fcntl module:
4724 $mode = (stat($filename))[2];
4726 $user_rwx = ($mode & S_IRWXU) >> 6;
4727 $group_read = ($mode & S_IRGRP) >> 3;
4728 $other_execute = $mode & S_IXOTH;
4730 printf "Permissions are %04o\n", S_ISMODE($mode), "\n";
4732 $is_setuid = $mode & S_ISUID;
4733 $is_setgid = S_ISDIR($mode);
4735 You could write the last two using the C<-u> and C<-d> operators.
4736 The commonly available S_IF* constants are
4738 # Permissions: read, write, execute, for user, group, others.
4740 S_IRWXU S_IRUSR S_IWUSR S_IXUSR
4741 S_IRWXG S_IRGRP S_IWGRP S_IXGRP
4742 S_IRWXO S_IROTH S_IWOTH S_IXOTH
4744 # Setuid/Setgid/Stickiness.
4746 S_ISUID S_ISGID S_ISVTX S_ISTXT
4748 # File types. Not necessarily all are available on your system.
4750 S_IFREG S_IFDIR S_IFLNK S_IFBLK S_ISCHR S_IFIFO S_IFSOCK S_IFWHT S_ENFMT
4752 # The following are compatibility aliases for S_IRUSR, S_IWUSR, S_IXUSR.
4754 S_IREAD S_IWRITE S_IEXEC
4756 and the S_IF* functions are
4758 S_IFMODE($mode) the part of $mode containing the permission bits
4759 and the setuid/setgid/sticky bits
4761 S_IFMT($mode) the part of $mode containing the file type
4762 which can be bit-anded with e.g. S_IFREG
4763 or with the following functions
4765 # The operators -f, -d, -l, -b, -c, -p, and -s.
4767 S_ISREG($mode) S_ISDIR($mode) S_ISLNK($mode)
4768 S_ISBLK($mode) S_ISCHR($mode) S_ISFIFO($mode) S_ISSOCK($mode)
4770 # No direct -X operator counterpart, but for the first one
4771 # the -g operator is often equivalent. The ENFMT stands for
4772 # record flocking enforcement, a platform-dependent feature.
4774 S_ISENFMT($mode) S_ISWHT($mode)
4776 See your native chmod(2) and stat(2) documentation for more details
4777 about the S_* constants.
4783 Takes extra time to study SCALAR (C<$_> if unspecified) in anticipation of
4784 doing many pattern matches on the string before it is next modified.
4785 This may or may not save time, depending on the nature and number of
4786 patterns you are searching on, and on the distribution of character
4787 frequencies in the string to be searched--you probably want to compare
4788 run times with and without it to see which runs faster. Those loops
4789 which scan for many short constant strings (including the constant
4790 parts of more complex patterns) will benefit most. You may have only
4791 one C<study> active at a time--if you study a different scalar the first
4792 is "unstudied". (The way C<study> works is this: a linked list of every
4793 character in the string to be searched is made, so we know, for
4794 example, where all the C<'k'> characters are. From each search string,
4795 the rarest character is selected, based on some static frequency tables
4796 constructed from some C programs and English text. Only those places
4797 that contain this "rarest" character are examined.)
4799 For example, here is a loop that inserts index producing entries
4800 before any line containing a certain pattern:
4804 print ".IX foo\n" if /\bfoo\b/;
4805 print ".IX bar\n" if /\bbar\b/;
4806 print ".IX blurfl\n" if /\bblurfl\b/;
4811 In searching for C</\bfoo\b/>, only those locations in C<$_> that contain C<f>
4812 will be looked at, because C<f> is rarer than C<o>. In general, this is
4813 a big win except in pathological cases. The only question is whether
4814 it saves you more time than it took to build the linked list in the
4817 Note that if you have to look for strings that you don't know till
4818 runtime, you can build an entire loop as a string and C<eval> that to
4819 avoid recompiling all your patterns all the time. Together with
4820 undefining C<$/> to input entire files as one record, this can be very
4821 fast, often faster than specialized programs like fgrep(1). The following
4822 scans a list of files (C<@files>) for a list of words (C<@words>), and prints
4823 out the names of those files that contain a match:
4825 $search = 'while (<>) { study;';
4826 foreach $word (@words) {
4827 $search .= "++\$seen{\$ARGV} if /\\b$word\\b/;\n";
4832 eval $search; # this screams
4833 $/ = "\n"; # put back to normal input delimiter
4834 foreach $file (sort keys(%seen)) {
4842 =item sub NAME BLOCK
4844 This is subroutine definition, not a real function I<per se>. With just a
4845 NAME (and possibly prototypes or attributes), it's just a forward declaration.
4846 Without a NAME, it's an anonymous function declaration, and does actually
4847 return a value: the CODE ref of the closure you just created. See L<perlsub>
4848 and L<perlref> for details.
4850 =item substr EXPR,OFFSET,LENGTH,REPLACEMENT
4852 =item substr EXPR,OFFSET,LENGTH
4854 =item substr EXPR,OFFSET
4856 Extracts a substring out of EXPR and returns it. First character is at
4857 offset C<0>, or whatever you've set C<$[> to (but don't do that).
4858 If OFFSET is negative (or more precisely, less than C<$[>), starts
4859 that far from the end of the string. If LENGTH is omitted, returns
4860 everything to the end of the string. If LENGTH is negative, leaves that
4861 many characters off the end of the string.
4863 You can use the substr() function as an lvalue, in which case EXPR
4864 must itself be an lvalue. If you assign something shorter than LENGTH,
4865 the string will shrink, and if you assign something longer than LENGTH,
4866 the string will grow to accommodate it. To keep the string the same
4867 length you may need to pad or chop your value using C<sprintf>.
4869 If OFFSET and LENGTH specify a substring that is partly outside the
4870 string, only the part within the string is returned. If the substring
4871 is beyond either end of the string, substr() returns the undefined
4872 value and produces a warning. When used as an lvalue, specifying a
4873 substring that is entirely outside the string is a fatal error.
4874 Here's an example showing the behavior for boundary cases:
4877 substr($name, 4) = 'dy'; # $name is now 'freddy'
4878 my $null = substr $name, 6, 2; # returns '' (no warning)
4879 my $oops = substr $name, 7; # returns undef, with warning
4880 substr($name, 7) = 'gap'; # fatal error
4882 An alternative to using substr() as an lvalue is to specify the
4883 replacement string as the 4th argument. This allows you to replace
4884 parts of the EXPR and return what was there before in one operation,
4885 just as you can with splice().
4887 =item symlink OLDFILE,NEWFILE
4889 Creates a new filename symbolically linked to the old filename.
4890 Returns C<1> for success, C<0> otherwise. On systems that don't support
4891 symbolic links, produces a fatal error at run time. To check for that,
4894 $symlink_exists = eval { symlink("",""); 1 };
4898 Calls the system call specified as the first element of the list,
4899 passing the remaining elements as arguments to the system call. If
4900 unimplemented, produces a fatal error. The arguments are interpreted
4901 as follows: if a given argument is numeric, the argument is passed as
4902 an int. If not, the pointer to the string value is passed. You are
4903 responsible to make sure a string is pre-extended long enough to
4904 receive any result that might be written into a string. You can't use a
4905 string literal (or other read-only string) as an argument to C<syscall>
4906 because Perl has to assume that any string pointer might be written
4908 integer arguments are not literals and have never been interpreted in a
4909 numeric context, you may need to add C<0> to them to force them to look
4910 like numbers. This emulates the C<syswrite> function (or vice versa):
4912 require 'syscall.ph'; # may need to run h2ph
4914 syscall(&SYS_write, fileno(STDOUT), $s, length $s);
4916 Note that Perl supports passing of up to only 14 arguments to your system call,
4917 which in practice should usually suffice.
4919 Syscall returns whatever value returned by the system call it calls.
4920 If the system call fails, C<syscall> returns C<-1> and sets C<$!> (errno).
4921 Note that some system calls can legitimately return C<-1>. The proper
4922 way to handle such calls is to assign C<$!=0;> before the call and
4923 check the value of C<$!> if syscall returns C<-1>.
4925 There's a problem with C<syscall(&SYS_pipe)>: it returns the file
4926 number of the read end of the pipe it creates. There is no way
4927 to retrieve the file number of the other end. You can avoid this
4928 problem by using C<pipe> instead.
4930 =item sysopen FILEHANDLE,FILENAME,MODE
4932 =item sysopen FILEHANDLE,FILENAME,MODE,PERMS
4934 Opens the file whose filename is given by FILENAME, and associates it
4935 with FILEHANDLE. If FILEHANDLE is an expression, its value is used as
4936 the name of the real filehandle wanted. This function calls the
4937 underlying operating system's C<open> function with the parameters
4938 FILENAME, MODE, PERMS.
4940 The possible values and flag bits of the MODE parameter are
4941 system-dependent; they are available via the standard module C<Fcntl>.
4942 See the documentation of your operating system's C<open> to see which
4943 values and flag bits are available. You may combine several flags
4944 using the C<|>-operator.
4946 Some of the most common values are C<O_RDONLY> for opening the file in
4947 read-only mode, C<O_WRONLY> for opening the file in write-only mode,
4948 and C<O_RDWR> for opening the file in read-write mode, and.
4950 For historical reasons, some values work on almost every system
4951 supported by perl: zero means read-only, one means write-only, and two
4952 means read/write. We know that these values do I<not> work under
4953 OS/390 & VM/ESA Unix and on the Macintosh; you probably don't want to
4954 use them in new code.
4956 If the file named by FILENAME does not exist and the C<open> call creates
4957 it (typically because MODE includes the C<O_CREAT> flag), then the value of
4958 PERMS specifies the permissions of the newly created file. If you omit
4959 the PERMS argument to C<sysopen>, Perl uses the octal value C<0666>.
4960 These permission values need to be in octal, and are modified by your
4961 process's current C<umask>.
4963 In many systems the C<O_EXCL> flag is available for opening files in
4964 exclusive mode. This is B<not> locking: exclusiveness means here that
4965 if the file already exists, sysopen() fails. The C<O_EXCL> wins
4968 Sometimes you may want to truncate an already-existing file: C<O_TRUNC>.
4970 You should seldom if ever use C<0644> as argument to C<sysopen>, because
4971 that takes away the user's option to have a more permissive umask.
4972 Better to omit it. See the perlfunc(1) entry on C<umask> for more
4975 Note that C<sysopen> depends on the fdopen() C library function.
4976 On many UNIX systems, fdopen() is known to fail when file descriptors
4977 exceed a certain value, typically 255. If you need more file
4978 descriptors than that, consider rebuilding Perl to use the C<sfio>
4979 library, or perhaps using the POSIX::open() function.
4981 See L<perlopentut> for a kinder, gentler explanation of opening files.
4983 =item sysread FILEHANDLE,SCALAR,LENGTH,OFFSET
4985 =item sysread FILEHANDLE,SCALAR,LENGTH
4987 Attempts to read LENGTH bytes of data into variable SCALAR from the
4988 specified FILEHANDLE, using the system call read(2). It bypasses stdio,
4989 so mixing this with other kinds of reads, C<print>, C<write>,
4990 C<seek>, C<tell>, or C<eof> can cause confusion because stdio
4991 usually buffers data. Returns the number of bytes actually read, C<0>
4992 at end of file, or undef if there was an error. SCALAR will be grown or
4993 shrunk so that the last byte actually read is the last byte of the
4994 scalar after the read.
4996 An OFFSET may be specified to place the read data at some place in the
4997 string other than the beginning. A negative OFFSET specifies
4998 placement at that many bytes counting backwards from the end of the
4999 string. A positive OFFSET greater than the length of SCALAR results
5000 in the string being padded to the required size with C<"\0"> bytes before
5001 the result of the read is appended.
5003 There is no syseof() function, which is ok, since eof() doesn't work
5004 very well on device files (like ttys) anyway. Use sysread() and check
5005 for a return value for 0 to decide whether you're done.
5007 =item sysseek FILEHANDLE,POSITION,WHENCE
5009 Sets FILEHANDLE's system position using the system call lseek(2). It
5010 bypasses stdio, so mixing this with reads (other than C<sysread>),
5011 C<print>, C<write>, C<seek>, C<tell>, or C<eof> may cause confusion.
5012 FILEHANDLE may be an expression whose value gives the name of the
5013 filehandle. The values for WHENCE are C<0> to set the new position to
5014 POSITION, C<1> to set the it to the current position plus POSITION,
5015 and C<2> to set it to EOF plus POSITION (typically negative). For
5016 WHENCE, you may also use the constants C<SEEK_SET>, C<SEEK_CUR>, and
5017 C<SEEK_END> (start of the file, current position, end of the file)
5018 from the Fcntl module.
5020 Returns the new position, or the undefined value on failure. A position
5021 of zero is returned as the string C<"0 but true">; thus C<sysseek> returns
5022 true on success and false on failure, yet you can still easily determine
5027 =item system PROGRAM LIST
5029 Does exactly the same thing as C<exec LIST>, except that a fork is
5030 done first, and the parent process waits for the child process to
5031 complete. Note that argument processing varies depending on the
5032 number of arguments. If there is more than one argument in LIST,
5033 or if LIST is an array with more than one value, starts the program
5034 given by the first element of the list with arguments given by the
5035 rest of the list. If there is only one scalar argument, the argument
5036 is checked for shell metacharacters, and if there are any, the
5037 entire argument is passed to the system's command shell for parsing
5038 (this is C</bin/sh -c> on Unix platforms, but varies on other
5039 platforms). If there are no shell metacharacters in the argument,
5040 it is split into words and passed directly to C<execvp>, which is
5043 Beginning with v5.6.0, Perl will attempt to flush all files opened for
5044 output before any operation that may do a fork, but this may not be
5045 supported on some platforms (see L<perlport>). To be safe, you may need
5046 to set C<$|> ($AUTOFLUSH in English) or call the C<autoflush()> method
5047 of C<IO::Handle> on any open handles.
5049 The return value is the exit status of the program as
5050 returned by the C<wait> call. To get the actual exit value divide by
5051 256. See also L</exec>. This is I<not> what you want to use to capture
5052 the output from a command, for that you should use merely backticks or
5053 C<qx//>, as described in L<perlop/"`STRING`">. Return value of -1
5054 indicates a failure to start the program (inspect $! for the reason).
5056 Like C<exec>, C<system> allows you to lie to a program about its name if
5057 you use the C<system PROGRAM LIST> syntax. Again, see L</exec>.
5059 Because C<system> and backticks block C<SIGINT> and C<SIGQUIT>, killing the
5060 program they're running doesn't actually interrupt your program.
5062 @args = ("command", "arg1", "arg2");
5064 or die "system @args failed: $?"
5066 You can check all the failure possibilities by inspecting
5069 $exit_value = $? >> 8;
5070 $signal_num = $? & 127;
5071 $dumped_core = $? & 128;
5073 When the arguments get executed via the system shell, results
5074 and return codes will be subject to its quirks and capabilities.
5075 See L<perlop/"`STRING`"> and L</exec> for details.
5077 =item syswrite FILEHANDLE,SCALAR,LENGTH,OFFSET
5079 =item syswrite FILEHANDLE,SCALAR,LENGTH
5081 =item syswrite FILEHANDLE,SCALAR
5083 Attempts to write LENGTH bytes of data from variable SCALAR to the
5084 specified FILEHANDLE, using the system call write(2). If LENGTH
5085 is not specified, writes whole SCALAR. It bypasses stdio, so mixing
5086 this with reads (other than C<sysread())>, C<print>, C<write>,
5087 C<seek>, C<tell>, or C<eof> may cause confusion because stdio
5088 usually buffers data. Returns the number of bytes actually written,
5089 or C<undef> if there was an error. If the LENGTH is greater than
5090 the available data in the SCALAR after the OFFSET, only as much
5091 data as is available will be written.
5093 An OFFSET may be specified to write the data from some part of the
5094 string other than the beginning. A negative OFFSET specifies writing
5095 that many bytes counting backwards from the end of the string. In the
5096 case the SCALAR is empty you can use OFFSET but only zero offset.
5098 =item tell FILEHANDLE
5102 Returns the current position for FILEHANDLE, or -1 on error. FILEHANDLE
5103 may be an expression whose value gives the name of the actual filehandle.
5104 If FILEHANDLE is omitted, assumes the file last read.
5106 The return value of tell() for the standard streams like the STDIN
5107 depends on the operating system: it may return -1 or something else.
5108 tell() on pipes, fifos, and sockets usually returns -1.
5110 There is no C<systell> function. Use C<sysseek(FH, 0, 1)> for that.
5112 =item telldir DIRHANDLE
5114 Returns the current position of the C<readdir> routines on DIRHANDLE.
5115 Value may be given to C<seekdir> to access a particular location in a
5116 directory. Has the same caveats about possible directory compaction as
5117 the corresponding system library routine.
5119 =item tie VARIABLE,CLASSNAME,LIST
5121 This function binds a variable to a package class that will provide the
5122 implementation for the variable. VARIABLE is the name of the variable
5123 to be enchanted. CLASSNAME is the name of a class implementing objects
5124 of correct type. Any additional arguments are passed to the C<new>
5125 method of the class (meaning C<TIESCALAR>, C<TIEHANDLE>, C<TIEARRAY>,
5126 or C<TIEHASH>). Typically these are arguments such as might be passed
5127 to the C<dbm_open()> function of C. The object returned by the C<new>
5128 method is also returned by the C<tie> function, which would be useful
5129 if you want to access other methods in CLASSNAME.
5131 Note that functions such as C<keys> and C<values> may return huge lists
5132 when used on large objects, like DBM files. You may prefer to use the
5133 C<each> function to iterate over such. Example:
5135 # print out history file offsets
5137 tie(%HIST, 'NDBM_File', '/usr/lib/news/history', 1, 0);
5138 while (($key,$val) = each %HIST) {
5139 print $key, ' = ', unpack('L',$val), "\n";
5143 A class implementing a hash should have the following methods:
5145 TIEHASH classname, LIST
5147 STORE this, key, value
5152 NEXTKEY this, lastkey
5156 A class implementing an ordinary array should have the following methods:
5158 TIEARRAY classname, LIST
5160 STORE this, key, value
5162 STORESIZE this, count
5168 SPLICE this, offset, length, LIST
5173 A class implementing a file handle should have the following methods:
5175 TIEHANDLE classname, LIST
5176 READ this, scalar, length, offset
5179 WRITE this, scalar, length, offset
5181 PRINTF this, format, LIST
5185 SEEK this, position, whence
5187 OPEN this, mode, LIST
5192 A class implementing a scalar should have the following methods:
5194 TIESCALAR classname, LIST
5200 Not all methods indicated above need be implemented. See L<perltie>,
5201 L<Tie::Hash>, L<Tie::Array>, L<Tie::Scalar>, and L<Tie::Handle>.
5203 Unlike C<dbmopen>, the C<tie> function will not use or require a module
5204 for you--you need to do that explicitly yourself. See L<DB_File>
5205 or the F<Config> module for interesting C<tie> implementations.
5207 For further details see L<perltie>, L<"tied VARIABLE">.
5211 Returns a reference to the object underlying VARIABLE (the same value
5212 that was originally returned by the C<tie> call that bound the variable
5213 to a package.) Returns the undefined value if VARIABLE isn't tied to a
5218 Returns the number of non-leap seconds since whatever time the system
5219 considers to be the epoch (that's 00:00:00, January 1, 1904 for MacOS,
5220 and 00:00:00 UTC, January 1, 1970 for most other systems).
5221 Suitable for feeding to C<gmtime> and C<localtime>.
5223 For measuring time in better granularity than one second,
5224 you may use either the Time::HiRes module from CPAN, or
5225 if you have gettimeofday(2), you may be able to use the
5226 C<syscall> interface of Perl, see L<perlfaq8> for details.
5230 Returns a four-element list giving the user and system times, in
5231 seconds, for this process and the children of this process.
5233 ($user,$system,$cuser,$csystem) = times;
5237 The transliteration operator. Same as C<y///>. See L<perlop>.
5239 =item truncate FILEHANDLE,LENGTH
5241 =item truncate EXPR,LENGTH
5243 Truncates the file opened on FILEHANDLE, or named by EXPR, to the
5244 specified length. Produces a fatal error if truncate isn't implemented
5245 on your system. Returns true if successful, the undefined value
5252 Returns an uppercased version of EXPR. This is the internal function
5253 implementing the C<\U> escape in double-quoted strings.
5254 Respects current LC_CTYPE locale if C<use locale> in force. See L<perllocale>.
5255 Under Unicode (C<use utf8>) it uses the standard Unicode uppercase mappings. (It
5256 does not attempt to do titlecase mapping on initial letters. See C<ucfirst> for that.)
5258 If EXPR is omitted, uses C<$_>.
5264 Returns the value of EXPR with the first character
5265 in uppercase (titlecase in Unicode). This is
5266 the internal function implementing the C<\u> escape in double-quoted strings.
5267 Respects current LC_CTYPE locale if C<use locale> in force. See L<perllocale>
5270 If EXPR is omitted, uses C<$_>.
5276 Sets the umask for the process to EXPR and returns the previous value.
5277 If EXPR is omitted, merely returns the current umask.
5279 The Unix permission C<rwxr-x---> is represented as three sets of three
5280 bits, or three octal digits: C<0750> (the leading 0 indicates octal
5281 and isn't one of the digits). The C<umask> value is such a number
5282 representing disabled permissions bits. The permission (or "mode")
5283 values you pass C<mkdir> or C<sysopen> are modified by your umask, so
5284 even if you tell C<sysopen> to create a file with permissions C<0777>,
5285 if your umask is C<0022> then the file will actually be created with
5286 permissions C<0755>. If your C<umask> were C<0027> (group can't
5287 write; others can't read, write, or execute), then passing
5288 C<sysopen> C<0666> would create a file with mode C<0640> (C<0666 &~
5291 Here's some advice: supply a creation mode of C<0666> for regular
5292 files (in C<sysopen>) and one of C<0777> for directories (in
5293 C<mkdir>) and executable files. This gives users the freedom of
5294 choice: if they want protected files, they might choose process umasks
5295 of C<022>, C<027>, or even the particularly antisocial mask of C<077>.
5296 Programs should rarely if ever make policy decisions better left to
5297 the user. The exception to this is when writing files that should be
5298 kept private: mail files, web browser cookies, I<.rhosts> files, and
5301 If umask(2) is not implemented on your system and you are trying to
5302 restrict access for I<yourself> (i.e., (EXPR & 0700) > 0), produces a
5303 fatal error at run time. If umask(2) is not implemented and you are
5304 not trying to restrict access for yourself, returns C<undef>.
5306 Remember that a umask is a number, usually given in octal; it is I<not> a
5307 string of octal digits. See also L</oct>, if all you have is a string.
5313 Undefines the value of EXPR, which must be an lvalue. Use only on a
5314 scalar value, an array (using C<@>), a hash (using C<%>), a subroutine
5315 (using C<&>), or a typeglob (using <*>). (Saying C<undef $hash{$key}>
5316 will probably not do what you expect on most predefined variables or
5317 DBM list values, so don't do that; see L<delete>.) Always returns the
5318 undefined value. You can omit the EXPR, in which case nothing is
5319 undefined, but you still get an undefined value that you could, for
5320 instance, return from a subroutine, assign to a variable or pass as a
5321 parameter. Examples:
5324 undef $bar{'blurfl'}; # Compare to: delete $bar{'blurfl'};
5328 undef *xyz; # destroys $xyz, @xyz, %xyz, &xyz, etc.
5329 return (wantarray ? (undef, $errmsg) : undef) if $they_blew_it;
5330 select undef, undef, undef, 0.25;
5331 ($a, $b, undef, $c) = &foo; # Ignore third value returned
5333 Note that this is a unary operator, not a list operator.
5339 Deletes a list of files. Returns the number of files successfully
5342 $cnt = unlink 'a', 'b', 'c';
5346 Note: C<unlink> will not delete directories unless you are superuser and
5347 the B<-U> flag is supplied to Perl. Even if these conditions are
5348 met, be warned that unlinking a directory can inflict damage on your
5349 filesystem. Use C<rmdir> instead.
5351 If LIST is omitted, uses C<$_>.
5353 =item unpack TEMPLATE,EXPR
5355 C<unpack> does the reverse of C<pack>: it takes a string
5356 and expands it out into a list of values.
5357 (In scalar context, it returns merely the first value produced.)
5359 The string is broken into chunks described by the TEMPLATE. Each chunk
5360 is converted separately to a value. Typically, either the string is a result
5361 of C<pack>, or the bytes of the string represent a C structure of some
5364 The TEMPLATE has the same format as in the C<pack> function.
5365 Here's a subroutine that does substring:
5368 my($what,$where,$howmuch) = @_;
5369 unpack("x$where a$howmuch", $what);
5374 sub ordinal { unpack("c",$_[0]); } # same as ord()
5376 In addition to fields allowed in pack(), you may prefix a field with
5377 a %<number> to indicate that
5378 you want a <number>-bit checksum of the items instead of the items
5379 themselves. Default is a 16-bit checksum. Checksum is calculated by
5380 summing numeric values of expanded values (for string fields the sum of
5381 C<ord($char)> is taken, for bit fields the sum of zeroes and ones).
5383 For example, the following
5384 computes the same number as the System V sum program:
5388 unpack("%32C*",<>) % 65535;
5391 The following efficiently counts the number of set bits in a bit vector:
5393 $setbits = unpack("%32b*", $selectmask);
5395 The C<p> and C<P> formats should be used with care. Since Perl
5396 has no way of checking whether the value passed to C<unpack()>
5397 corresponds to a valid memory location, passing a pointer value that's
5398 not known to be valid is likely to have disastrous consequences.
5400 If the repeat count of a field is larger than what the remainder of
5401 the input string allows, repeat count is decreased. If the input string
5402 is longer than one described by the TEMPLATE, the rest is ignored.
5404 See L</pack> for more examples and notes.
5406 =item untie VARIABLE
5408 Breaks the binding between a variable and a package. (See C<tie>.)
5410 =item unshift ARRAY,LIST
5412 Does the opposite of a C<shift>. Or the opposite of a C<push>,
5413 depending on how you look at it. Prepends list to the front of the
5414 array, and returns the new number of elements in the array.
5416 unshift(ARGV, '-e') unless $ARGV[0] =~ /^-/;
5418 Note the LIST is prepended whole, not one element at a time, so the
5419 prepended elements stay in the same order. Use C<reverse> to do the
5422 =item use Module VERSION LIST
5424 =item use Module VERSION
5426 =item use Module LIST
5432 Imports some semantics into the current package from the named module,
5433 generally by aliasing certain subroutine or variable names into your
5434 package. It is exactly equivalent to
5436 BEGIN { require Module; import Module LIST; }
5438 except that Module I<must> be a bareword.
5440 VERSION, which can be specified as a literal of the form v5.6.1, demands
5441 that the current version of Perl (C<$^V> or $PERL_VERSION) be at least
5442 as recent as that version. (For compatibility with older versions of Perl,
5443 a numeric literal will also be interpreted as VERSION.) If the version
5444 of the running Perl interpreter is less than VERSION, then an error
5445 message is printed and Perl exits immediately without attempting to
5446 parse the rest of the file. Compare with L</require>, which can do a
5447 similar check at run time.
5449 use v5.6.1; # compile time version check
5451 use 5.005_03; # float version allowed for compatibility
5453 This is often useful if you need to check the current Perl version before
5454 C<use>ing library modules that have changed in incompatible ways from
5455 older versions of Perl. (We try not to do this more than we have to.)
5457 The C<BEGIN> forces the C<require> and C<import> to happen at compile time. The
5458 C<require> makes sure the module is loaded into memory if it hasn't been
5459 yet. The C<import> is not a builtin--it's just an ordinary static method
5460 call into the C<Module> package to tell the module to import the list of
5461 features back into the current package. The module can implement its
5462 C<import> method any way it likes, though most modules just choose to
5463 derive their C<import> method via inheritance from the C<Exporter> class that
5464 is defined in the C<Exporter> module. See L<Exporter>. If no C<import>
5465 method can be found then the call is skipped.
5467 If you do not want to call the package's C<import> method (for instance,
5468 to stop your namespace from being altered), explicitly supply the empty list:
5472 That is exactly equivalent to
5474 BEGIN { require Module }
5476 If the VERSION argument is present between Module and LIST, then the
5477 C<use> will call the VERSION method in class Module with the given
5478 version as an argument. The default VERSION method, inherited from
5479 the UNIVERSAL class, croaks if the given version is larger than the
5480 value of the variable C<$Module::VERSION>.
5482 Again, there is a distinction between omitting LIST (C<import> called
5483 with no arguments) and an explicit empty LIST C<()> (C<import> not
5484 called). Note that there is no comma after VERSION!
5486 Because this is a wide-open interface, pragmas (compiler directives)
5487 are also implemented this way. Currently implemented pragmas are:
5492 use sigtrap qw(SEGV BUS);
5493 use strict qw(subs vars refs);
5494 use subs qw(afunc blurfl);
5495 use warnings qw(all);
5497 Some of these pseudo-modules import semantics into the current
5498 block scope (like C<strict> or C<integer>, unlike ordinary modules,
5499 which import symbols into the current package (which are effective
5500 through the end of the file).
5502 There's a corresponding C<no> command that unimports meanings imported
5503 by C<use>, i.e., it calls C<unimport Module LIST> instead of C<import>.
5509 If no C<unimport> method can be found the call fails with a fatal error.
5511 See L<perlmodlib> for a list of standard modules and pragmas. See L<perlrun>
5512 for the C<-M> and C<-m> command-line options to perl that give C<use>
5513 functionality from the command-line.
5517 Changes the access and modification times on each file of a list of
5518 files. The first two elements of the list must be the NUMERICAL access
5519 and modification times, in that order. Returns the number of files
5520 successfully changed. The inode change time of each file is set
5521 to the current time. This code has the same effect as the C<touch>
5522 command if the files already exist:
5526 utime $now, $now, @ARGV;
5530 Returns a list consisting of all the values of the named hash. (In a
5531 scalar context, returns the number of values.) The values are
5532 returned in an apparently random order. The actual random order is
5533 subject to change in future versions of perl, but it is guaranteed to
5534 be the same order as either the C<keys> or C<each> function would
5535 produce on the same (unmodified) hash.
5537 Note that the values are not copied, which means modifying them will
5538 modify the contents of the hash:
5540 for (values %hash) { s/foo/bar/g } # modifies %hash values
5541 for (@hash{keys %hash}) { s/foo/bar/g } # same
5543 As a side effect, calling values() resets the HASH's internal iterator.
5544 See also C<keys>, C<each>, and C<sort>.
5546 =item vec EXPR,OFFSET,BITS
5548 Treats the string in EXPR as a bit vector made up of elements of
5549 width BITS, and returns the value of the element specified by OFFSET
5550 as an unsigned integer. BITS therefore specifies the number of bits
5551 that are reserved for each element in the bit vector. This must
5552 be a power of two from 1 to 32 (or 64, if your platform supports
5555 If BITS is 8, "elements" coincide with bytes of the input string.
5557 If BITS is 16 or more, bytes of the input string are grouped into chunks
5558 of size BITS/8, and each group is converted to a number as with
5559 pack()/unpack() with big-endian formats C<n>/C<N> (and analogously
5560 for BITS==64). See L<"pack"> for details.
5562 If bits is 4 or less, the string is broken into bytes, then the bits
5563 of each byte are broken into 8/BITS groups. Bits of a byte are
5564 numbered in a little-endian-ish way, as in C<0x01>, C<0x02>,
5565 C<0x04>, C<0x08>, C<0x10>, C<0x20>, C<0x40>, C<0x80>. For example,
5566 breaking the single input byte C<chr(0x36)> into two groups gives a list
5567 C<(0x6, 0x3)>; breaking it into 4 groups gives C<(0x2, 0x1, 0x3, 0x0)>.
5569 C<vec> may also be assigned to, in which case parentheses are needed
5570 to give the expression the correct precedence as in
5572 vec($image, $max_x * $x + $y, 8) = 3;
5574 If the selected element is outside the string, the value 0 is returned.
5575 If an element off the end of the string is written to, Perl will first
5576 extend the string with sufficiently many zero bytes. It is an error
5577 to try to write off the beginning of the string (i.e. negative OFFSET).
5579 The string should not contain any character with the value > 255 (which
5580 can only happen if you're using UTF8 encoding). If it does, it will be
5581 treated as something which is not UTF8 encoded. When the C<vec> was
5582 assigned to, other parts of your program will also no longer consider the
5583 string to be UTF8 encoded. In other words, if you do have such characters
5584 in your string, vec() will operate on the actual byte string, and not the
5585 conceptual character string.
5587 Strings created with C<vec> can also be manipulated with the logical
5588 operators C<|>, C<&>, C<^>, and C<~>. These operators will assume a bit
5589 vector operation is desired when both operands are strings.
5590 See L<perlop/"Bitwise String Operators">.
5592 The following code will build up an ASCII string saying C<'PerlPerlPerl'>.
5593 The comments show the string after each step. Note that this code works
5594 in the same way on big-endian or little-endian machines.
5597 vec($foo, 0, 32) = 0x5065726C; # 'Perl'
5599 # $foo eq "Perl" eq "\x50\x65\x72\x6C", 32 bits
5600 print vec($foo, 0, 8); # prints 80 == 0x50 == ord('P')
5602 vec($foo, 2, 16) = 0x5065; # 'PerlPe'
5603 vec($foo, 3, 16) = 0x726C; # 'PerlPerl'
5604 vec($foo, 8, 8) = 0x50; # 'PerlPerlP'
5605 vec($foo, 9, 8) = 0x65; # 'PerlPerlPe'
5606 vec($foo, 20, 4) = 2; # 'PerlPerlPe' . "\x02"
5607 vec($foo, 21, 4) = 7; # 'PerlPerlPer'
5609 vec($foo, 45, 2) = 3; # 'PerlPerlPer' . "\x0c"
5610 vec($foo, 93, 1) = 1; # 'PerlPerlPer' . "\x2c"
5611 vec($foo, 94, 1) = 1; # 'PerlPerlPerl'
5614 To transform a bit vector into a string or list of 0's and 1's, use these:
5616 $bits = unpack("b*", $vector);
5617 @bits = split(//, unpack("b*", $vector));
5619 If you know the exact length in bits, it can be used in place of the C<*>.
5621 Here is an example to illustrate how the bits actually fall in place:
5627 unpack("V",$_) 01234567890123456789012345678901
5628 ------------------------------------------------------------------
5633 for ($shift=0; $shift < $width; ++$shift) {
5634 for ($off=0; $off < 32/$width; ++$off) {
5635 $str = pack("B*", "0"x32);
5636 $bits = (1<<$shift);
5637 vec($str, $off, $width) = $bits;
5638 $res = unpack("b*",$str);
5639 $val = unpack("V", $str);
5646 vec($_,@#,@#) = @<< == @######### @>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
5647 $off, $width, $bits, $val, $res
5651 Regardless of the machine architecture on which it is run, the above
5652 example should print the following table:
5655 unpack("V",$_) 01234567890123456789012345678901
5656 ------------------------------------------------------------------
5657 vec($_, 0, 1) = 1 == 1 10000000000000000000000000000000
5658 vec($_, 1, 1) = 1 == 2 01000000000000000000000000000000
5659 vec($_, 2, 1) = 1 == 4 00100000000000000000000000000000
5660 vec($_, 3, 1) = 1 == 8 00010000000000000000000000000000
5661 vec($_, 4, 1) = 1 == 16 00001000000000000000000000000000
5662 vec($_, 5, 1) = 1 == 32 00000100000000000000000000000000
5663 vec($_, 6, 1) = 1 == 64 00000010000000000000000000000000
5664 vec($_, 7, 1) = 1 == 128 00000001000000000000000000000000
5665 vec($_, 8, 1) = 1 == 256 00000000100000000000000000000000
5666 vec($_, 9, 1) = 1 == 512 00000000010000000000000000000000
5667 vec($_,10, 1) = 1 == 1024 00000000001000000000000000000000
5668 vec($_,11, 1) = 1 == 2048 00000000000100000000000000000000
5669 vec($_,12, 1) = 1 == 4096 00000000000010000000000000000000
5670 vec($_,13, 1) = 1 == 8192 00000000000001000000000000000000
5671 vec($_,14, 1) = 1 == 16384 00000000000000100000000000000000
5672 vec($_,15, 1) = 1 == 32768 00000000000000010000000000000000
5673 vec($_,16, 1) = 1 == 65536 00000000000000001000000000000000
5674 vec($_,17, 1) = 1 == 131072 00000000000000000100000000000000
5675 vec($_,18, 1) = 1 == 262144 00000000000000000010000000000000
5676 vec($_,19, 1) = 1 == 524288 00000000000000000001000000000000
5677 vec($_,20, 1) = 1 == 1048576 00000000000000000000100000000000
5678 vec($_,21, 1) = 1 == 2097152 00000000000000000000010000000000
5679 vec($_,22, 1) = 1 == 4194304 00000000000000000000001000000000
5680 vec($_,23, 1) = 1 == 8388608 00000000000000000000000100000000
5681 vec($_,24, 1) = 1 == 16777216 00000000000000000000000010000000
5682 vec($_,25, 1) = 1 == 33554432 00000000000000000000000001000000
5683 vec($_,26, 1) = 1 == 67108864 00000000000000000000000000100000
5684 vec($_,27, 1) = 1 == 134217728 00000000000000000000000000010000
5685 vec($_,28, 1) = 1 == 268435456 00000000000000000000000000001000
5686 vec($_,29, 1) = 1 == 536870912 00000000000000000000000000000100
5687 vec($_,30, 1) = 1 == 1073741824 00000000000000000000000000000010
5688 vec($_,31, 1) = 1 == 2147483648 00000000000000000000000000000001
5689 vec($_, 0, 2) = 1 == 1 10000000000000000000000000000000
5690 vec($_, 1, 2) = 1 == 4 00100000000000000000000000000000
5691 vec($_, 2, 2) = 1 == 16 00001000000000000000000000000000
5692 vec($_, 3, 2) = 1 == 64 00000010000000000000000000000000
5693 vec($_, 4, 2) = 1 == 256 00000000100000000000000000000000
5694 vec($_, 5, 2) = 1 == 1024 00000000001000000000000000000000
5695 vec($_, 6, 2) = 1 == 4096 00000000000010000000000000000000
5696 vec($_, 7, 2) = 1 == 16384 00000000000000100000000000000000
5697 vec($_, 8, 2) = 1 == 65536 00000000000000001000000000000000
5698 vec($_, 9, 2) = 1 == 262144 00000000000000000010000000000000
5699 vec($_,10, 2) = 1 == 1048576 00000000000000000000100000000000
5700 vec($_,11, 2) = 1 == 4194304 00000000000000000000001000000000
5701 vec($_,12, 2) = 1 == 16777216 00000000000000000000000010000000
5702 vec($_,13, 2) = 1 == 67108864 00000000000000000000000000100000
5703 vec($_,14, 2) = 1 == 268435456 00000000000000000000000000001000
5704 vec($_,15, 2) = 1 == 1073741824 00000000000000000000000000000010
5705 vec($_, 0, 2) = 2 == 2 01000000000000000000000000000000
5706 vec($_, 1, 2) = 2 == 8 00010000000000000000000000000000
5707 vec($_, 2, 2) = 2 == 32 00000100000000000000000000000000
5708 vec($_, 3, 2) = 2 == 128 00000001000000000000000000000000
5709 vec($_, 4, 2) = 2 == 512 00000000010000000000000000000000
5710 vec($_, 5, 2) = 2 == 2048 00000000000100000000000000000000
5711 vec($_, 6, 2) = 2 == 8192 00000000000001000000000000000000
5712 vec($_, 7, 2) = 2 == 32768 00000000000000010000000000000000
5713 vec($_, 8, 2) = 2 == 131072 00000000000000000100000000000000
5714 vec($_, 9, 2) = 2 == 524288 00000000000000000001000000000000
5715 vec($_,10, 2) = 2 == 2097152 00000000000000000000010000000000
5716 vec($_,11, 2) = 2 == 8388608 00000000000000000000000100000000
5717 vec($_,12, 2) = 2 == 33554432 00000000000000000000000001000000
5718 vec($_,13, 2) = 2 == 134217728 00000000000000000000000000010000
5719 vec($_,14, 2) = 2 == 536870912 00000000000000000000000000000100
5720 vec($_,15, 2) = 2 == 2147483648 00000000000000000000000000000001
5721 vec($_, 0, 4) = 1 == 1 10000000000000000000000000000000
5722 vec($_, 1, 4) = 1 == 16 00001000000000000000000000000000
5723 vec($_, 2, 4) = 1 == 256 00000000100000000000000000000000
5724 vec($_, 3, 4) = 1 == 4096 00000000000010000000000000000000
5725 vec($_, 4, 4) = 1 == 65536 00000000000000001000000000000000
5726 vec($_, 5, 4) = 1 == 1048576 00000000000000000000100000000000
5727 vec($_, 6, 4) = 1 == 16777216 00000000000000000000000010000000
5728 vec($_, 7, 4) = 1 == 268435456 00000000000000000000000000001000
5729 vec($_, 0, 4) = 2 == 2 01000000000000000000000000000000
5730 vec($_, 1, 4) = 2 == 32 00000100000000000000000000000000
5731 vec($_, 2, 4) = 2 == 512 00000000010000000000000000000000
5732 vec($_, 3, 4) = 2 == 8192 00000000000001000000000000000000
5733 vec($_, 4, 4) = 2 == 131072 00000000000000000100000000000000
5734 vec($_, 5, 4) = 2 == 2097152 00000000000000000000010000000000
5735 vec($_, 6, 4) = 2 == 33554432 00000000000000000000000001000000
5736 vec($_, 7, 4) = 2 == 536870912 00000000000000000000000000000100
5737 vec($_, 0, 4) = 4 == 4 00100000000000000000000000000000
5738 vec($_, 1, 4) = 4 == 64 00000010000000000000000000000000
5739 vec($_, 2, 4) = 4 == 1024 00000000001000000000000000000000
5740 vec($_, 3, 4) = 4 == 16384 00000000000000100000000000000000
5741 vec($_, 4, 4) = 4 == 262144 00000000000000000010000000000000
5742 vec($_, 5, 4) = 4 == 4194304 00000000000000000000001000000000
5743 vec($_, 6, 4) = 4 == 67108864 00000000000000000000000000100000
5744 vec($_, 7, 4) = 4 == 1073741824 00000000000000000000000000000010
5745 vec($_, 0, 4) = 8 == 8 00010000000000000000000000000000
5746 vec($_, 1, 4) = 8 == 128 00000001000000000000000000000000
5747 vec($_, 2, 4) = 8 == 2048 00000000000100000000000000000000
5748 vec($_, 3, 4) = 8 == 32768 00000000000000010000000000000000
5749 vec($_, 4, 4) = 8 == 524288 00000000000000000001000000000000
5750 vec($_, 5, 4) = 8 == 8388608 00000000000000000000000100000000
5751 vec($_, 6, 4) = 8 == 134217728 00000000000000000000000000010000
5752 vec($_, 7, 4) = 8 == 2147483648 00000000000000000000000000000001
5753 vec($_, 0, 8) = 1 == 1 10000000000000000000000000000000
5754 vec($_, 1, 8) = 1 == 256 00000000100000000000000000000000
5755 vec($_, 2, 8) = 1 == 65536 00000000000000001000000000000000
5756 vec($_, 3, 8) = 1 == 16777216 00000000000000000000000010000000
5757 vec($_, 0, 8) = 2 == 2 01000000000000000000000000000000
5758 vec($_, 1, 8) = 2 == 512 00000000010000000000000000000000
5759 vec($_, 2, 8) = 2 == 131072 00000000000000000100000000000000
5760 vec($_, 3, 8) = 2 == 33554432 00000000000000000000000001000000
5761 vec($_, 0, 8) = 4 == 4 00100000000000000000000000000000
5762 vec($_, 1, 8) = 4 == 1024 00000000001000000000000000000000
5763 vec($_, 2, 8) = 4 == 262144 00000000000000000010000000000000
5764 vec($_, 3, 8) = 4 == 67108864 00000000000000000000000000100000
5765 vec($_, 0, 8) = 8 == 8 00010000000000000000000000000000
5766 vec($_, 1, 8) = 8 == 2048 00000000000100000000000000000000
5767 vec($_, 2, 8) = 8 == 524288 00000000000000000001000000000000
5768 vec($_, 3, 8) = 8 == 134217728 00000000000000000000000000010000
5769 vec($_, 0, 8) = 16 == 16 00001000000000000000000000000000
5770 vec($_, 1, 8) = 16 == 4096 00000000000010000000000000000000
5771 vec($_, 2, 8) = 16 == 1048576 00000000000000000000100000000000
5772 vec($_, 3, 8) = 16 == 268435456 00000000000000000000000000001000
5773 vec($_, 0, 8) = 32 == 32 00000100000000000000000000000000
5774 vec($_, 1, 8) = 32 == 8192 00000000000001000000000000000000
5775 vec($_, 2, 8) = 32 == 2097152 00000000000000000000010000000000
5776 vec($_, 3, 8) = 32 == 536870912 00000000000000000000000000000100
5777 vec($_, 0, 8) = 64 == 64 00000010000000000000000000000000
5778 vec($_, 1, 8) = 64 == 16384 00000000000000100000000000000000
5779 vec($_, 2, 8) = 64 == 4194304 00000000000000000000001000000000
5780 vec($_, 3, 8) = 64 == 1073741824 00000000000000000000000000000010
5781 vec($_, 0, 8) = 128 == 128 00000001000000000000000000000000
5782 vec($_, 1, 8) = 128 == 32768 00000000000000010000000000000000
5783 vec($_, 2, 8) = 128 == 8388608 00000000000000000000000100000000
5784 vec($_, 3, 8) = 128 == 2147483648 00000000000000000000000000000001
5788 Behaves like the wait(2) system call on your system: it waits for a child
5789 process to terminate and returns the pid of the deceased process, or
5790 C<-1> if there are no child processes. The status is returned in C<$?>.
5791 Note that a return value of C<-1> could mean that child processes are
5792 being automatically reaped, as described in L<perlipc>.
5794 =item waitpid PID,FLAGS
5796 Waits for a particular child process to terminate and returns the pid of
5797 the deceased process, or C<-1> if there is no such child process. On some
5798 systems, a value of 0 indicates that there are processes still running.
5799 The status is returned in C<$?>. If you say
5801 use POSIX ":sys_wait_h";
5804 $kid = waitpid(-1,&WNOHANG);
5807 then you can do a non-blocking wait for all pending zombie processes.
5808 Non-blocking wait is available on machines supporting either the
5809 waitpid(2) or wait4(2) system calls. However, waiting for a particular
5810 pid with FLAGS of C<0> is implemented everywhere. (Perl emulates the
5811 system call by remembering the status values of processes that have
5812 exited but have not been harvested by the Perl script yet.)
5814 Note that on some systems, a return value of C<-1> could mean that child
5815 processes are being automatically reaped. See L<perlipc> for details,
5816 and for other examples.
5820 Returns true if the context of the currently executing subroutine is
5821 looking for a list value. Returns false if the context is looking
5822 for a scalar. Returns the undefined value if the context is looking
5823 for no value (void context).
5825 return unless defined wantarray; # don't bother doing more
5826 my @a = complex_calculation();
5827 return wantarray ? @a : "@a";
5829 This function should have been named wantlist() instead.
5833 Produces a message on STDERR just like C<die>, but doesn't exit or throw
5836 If LIST is empty and C<$@> already contains a value (typically from a
5837 previous eval) that value is used after appending C<"\t...caught">
5838 to C<$@>. This is useful for staying almost, but not entirely similar to
5841 If C<$@> is empty then the string C<"Warning: Something's wrong"> is used.
5843 No message is printed if there is a C<$SIG{__WARN__}> handler
5844 installed. It is the handler's responsibility to deal with the message
5845 as it sees fit (like, for instance, converting it into a C<die>). Most
5846 handlers must therefore make arrangements to actually display the
5847 warnings that they are not prepared to deal with, by calling C<warn>
5848 again in the handler. Note that this is quite safe and will not
5849 produce an endless loop, since C<__WARN__> hooks are not called from
5852 You will find this behavior is slightly different from that of
5853 C<$SIG{__DIE__}> handlers (which don't suppress the error text, but can
5854 instead call C<die> again to change it).
5856 Using a C<__WARN__> handler provides a powerful way to silence all
5857 warnings (even the so-called mandatory ones). An example:
5859 # wipe out *all* compile-time warnings
5860 BEGIN { $SIG{'__WARN__'} = sub { warn $_[0] if $DOWARN } }
5862 my $foo = 20; # no warning about duplicate my $foo,
5863 # but hey, you asked for it!
5864 # no compile-time or run-time warnings before here
5867 # run-time warnings enabled after here
5868 warn "\$foo is alive and $foo!"; # does show up
5870 See L<perlvar> for details on setting C<%SIG> entries, and for more
5871 examples. See the Carp module for other kinds of warnings using its
5872 carp() and cluck() functions.
5874 =item write FILEHANDLE
5880 Writes a formatted record (possibly multi-line) to the specified FILEHANDLE,
5881 using the format associated with that file. By default the format for
5882 a file is the one having the same name as the filehandle, but the
5883 format for the current output channel (see the C<select> function) may be set
5884 explicitly by assigning the name of the format to the C<$~> variable.
5886 Top of form processing is handled automatically: if there is
5887 insufficient room on the current page for the formatted record, the
5888 page is advanced by writing a form feed, a special top-of-page format
5889 is used to format the new page header, and then the record is written.
5890 By default the top-of-page format is the name of the filehandle with
5891 "_TOP" appended, but it may be dynamically set to the format of your
5892 choice by assigning the name to the C<$^> variable while the filehandle is
5893 selected. The number of lines remaining on the current page is in
5894 variable C<$->, which can be set to C<0> to force a new page.
5896 If FILEHANDLE is unspecified, output goes to the current default output
5897 channel, which starts out as STDOUT but may be changed by the
5898 C<select> operator. If the FILEHANDLE is an EXPR, then the expression
5899 is evaluated and the resulting string is used to look up the name of
5900 the FILEHANDLE at run time. For more on formats, see L<perlform>.
5902 Note that write is I<not> the opposite of C<read>. Unfortunately.
5906 The transliteration operator. Same as C<tr///>. See L<perlop>.