3 perldiag - various Perl diagnostics
7 These messages are classified as follows (listed in increasing order of
10 (W) A warning (optional).
11 (D) A deprecation (optional).
12 (S) A severe warning (mandatory).
13 (F) A fatal error (trappable).
14 (P) An internal error you should never see (trappable).
15 (X) A very fatal error (non-trappable).
16 (A) An alien error message (not generated by Perl).
18 Optional warnings are enabled by using the B<-w> switch. Warnings may
19 be captured by setting C<$SIG{__WARN__}> to a reference to a routine that will be
20 called on each warning instead of printing it. See L<perlvar>.
21 Trappable errors may be trapped using the eval operator. See
24 Some of these messages are generic. Spots that vary are denoted with a %s,
25 just as in a printf format. Note that some messages start with a %s!
26 The symbols C<"%-?@> sort before the letters, while C<[> and C<\> sort after.
30 =item "my" variable %s can't be in a package
32 (F) Lexically scoped variables aren't in a package, so it doesn't make sense
33 to try to declare one with a package qualifier on the front. Use local()
34 if you want to localize a package variable.
36 =item "my" variable %s masks earlier declaration in same scope
38 (S) A lexical variable has been redeclared in the same scope, effectively
39 eliminating all access to the previous instance. This is almost always
40 a typographical error. Note that the earlier variable will still exist
41 until the end of the scope or until all closure referents to it are
44 =item "no" not allowed in expression
46 (F) The "no" keyword is recognized and executed at compile time, and returns
47 no useful value. See L<perlmod>.
49 =item "use" not allowed in expression
51 (F) The "use" keyword is recognized and executed at compile time, and returns
52 no useful value. See L<perlmod>.
54 =item % may only be used in unpack
56 (F) You can't pack a string by supplying a checksum, because the
57 checksumming process loses information, and you can't go the other
58 way. See L<perlfunc/unpack>.
60 =item %s (...) interpreted as function
62 (W) You've run afoul of the rule that says that any list operator followed
63 by parentheses turns into a function, with all the list operators arguments
64 found inside the parentheses. See L<perlop/Terms and List Operators (Leftward)>.
66 =item %s argument is not a HASH element
68 (F) The argument to exists() must be a hash element, such as
73 =item %s argument is not a HASH element or slice
75 (F) The argument to delete() must be either a hash element, such as
80 or a hash slice, such as
82 @foo{$bar, $baz, $xyzzy}
83 @{$ref->[12]}{"susie", "queue"}
85 =item %s did not return a true value
87 (F) A required (or used) file must return a true value to indicate that
88 it compiled correctly and ran its initialization code correctly. It's
89 traditional to end such a file with a "1;", though any true value would
90 do. See L<perlfunc/require>.
92 =item %s found where operator expected
94 (S) The Perl lexer knows whether to expect a term or an operator. If it
95 sees what it knows to be a term when it was expecting to see an operator,
96 it gives you this warning. Usually it indicates that an operator or
97 delimiter was omitted, such as a semicolon.
99 =item %s had compilation errors.
101 (F) The final summary message when a C<perl -c> fails.
103 =item %s has too many errors.
105 (F) The parser has given up trying to parse the program after 10 errors.
106 Further error messages would likely be uninformative.
108 =item %s matches null string many times
110 (W) The pattern you've specified would be an infinite loop if the
111 regular expression engine didn't specifically check for that. See L<perlre>.
113 =item %s never introduced
115 (S) The symbol in question was declared but somehow went out of scope
116 before it could possibly have been used.
120 (F) The final summary message when a C<perl -c> succeeds.
122 =item %s: Command not found.
124 (A) You've accidentally run your script through B<csh> instead
125 of Perl. Check the E<lt>#!E<gt> line, or manually feed your script
128 =item %s: Expression syntax.
130 (A) You've accidentally run your script through B<csh> instead
131 of Perl. Check the E<lt>#!E<gt> line, or manually feed your script
134 =item %s: Undefined variable.
136 (A) You've accidentally run your script through B<csh> instead
137 of Perl. Check the E<lt>#!E<gt> line, or manually feed your script
142 (A) You've accidentally run your script through the Bourne shell
143 instead of Perl. Check the E<lt>#!E<gt> line, or manually feed your script
146 =item B<-P> not allowed for setuid/setgid script
148 (F) The script would have to be opened by the C preprocessor by name,
149 which provides a race condition that breaks security.
151 =item C<-T> and C<-B> not implemented on filehandles
153 (F) Perl can't peek at the stdio buffer of filehandles when it doesn't
154 know about your kind of stdio. You'll have to use a filename instead.
156 =item 500 Server error
160 =item ?+* follows nothing in regexp
162 (F) You started a regular expression with a quantifier. Backslash it
163 if you meant it literally. See L<perlre>.
165 =item @ outside of string
167 (F) You had a pack template that specified an absolute position outside
168 the string being unpacked. See L<perlfunc/pack>.
170 =item accept() on closed fd
172 (W) You tried to do an accept on a closed socket. Did you forget to check
173 the return value of your socket() call? See L<perlfunc/accept>.
175 =item Allocation too large: %lx
177 (X) You can't allocate more than 64K on an MSDOS machine.
179 =item Allocation too large
181 (F) You can't allocate more than 2^31+"small amount" bytes.
183 =item Arg too short for msgsnd
185 (F) msgsnd() requires a string at least as long as sizeof(long).
187 =item Ambiguous use of %s resolved as %s
189 (W)(S) You said something that may not be interpreted the way
190 you thought. Normally it's pretty easy to disambiguate it by supplying
191 a missing quote, operator, parenthesis pair or declaration.
193 =item Args must match #! line
195 (F) The setuid emulator requires that the arguments Perl was invoked
196 with match the arguments specified on the #! line.
198 =item Argument "%s" isn't numeric
200 (W) The indicated string was fed as an argument to an operator that
201 expected a numeric value instead. If you're fortunate the message
202 will identify which operator was so unfortunate.
204 =item Array @%s missing the @ in argument %d of %s()
206 (D) Really old Perl let you omit the @ on array names in some spots. This
207 is now heavily deprecated.
209 =item assertion botched: %s
211 (P) The malloc package that comes with Perl had an internal failure.
213 =item Assertion failed: file "%s"
215 (P) A general assertion failed. The file in question must be examined.
217 =item Assignment to both a list and a scalar
219 (F) If you assign to a conditional operator, the 2nd and 3rd arguments
220 must either both be scalars or both be lists. Otherwise Perl won't
221 know which context to supply to the right side.
223 =item Attempt to free non-arena SV: 0x%lx
225 (P) All SV objects are supposed to be allocated from arenas that will
226 be garbage collected on exit. An SV was discovered to be outside any
229 =item Attempt to free non-existent shared string
231 (P) Perl maintains a reference counted internal table of strings to
232 optimize the storage and access of hash keys and other strings. This
233 indicates someone tried to decrement the reference count of a string
234 that can no longer be found in the table.
236 =item Attempt to free temp prematurely
238 (W) Mortalized values are supposed to be freed by the free_tmps()
239 routine. This indicates that something else is freeing the SV before
240 the free_tmps() routine gets a chance, which means that the free_tmps()
241 routine will be freeing an unreferenced scalar when it does try to free
244 =item Attempt to free unreferenced glob pointers
246 (P) The reference counts got screwed up on symbol aliases.
248 =item Attempt to free unreferenced scalar
250 (W) Perl went to decrement the reference count of a scalar to see if it
251 would go to 0, and discovered that it had already gone to 0 earlier,
252 and should have been freed, and in fact, probably was freed. This
253 could indicate that SvREFCNT_dec() was called too many times, or that
254 SvREFCNT_inc() was called too few times, or that the SV was mortalized
255 when it shouldn't have been, or that memory has been corrupted.
257 =item Attempt to use reference as lvalue in substr
259 (W) You supplied a reference as the first argument to substr() used
260 as an lvalue, which is pretty strange. Perhaps you forgot to
261 dereference it first. See L<perlfunc/substr>.
263 =item Bad arg length for %s, is %d, should be %d
265 (F) You passed a buffer of the wrong size to one of msgctl(), semctl() or
266 shmctl(). In C parlance, the correct sizes are, respectively,
267 S<sizeof(struct msqid_ds *)>, S<sizeof(struct semid_ds *)>, and
268 S<sizeof(struct shmid_ds *)>.
270 =item Bad associative array
272 (P) One of the internal hash routines was passed a null HV pointer.
274 =item Bad filehandle: %s
276 (F) A symbol was passed to something wanting a filehandle, but the symbol
277 has no filehandle associated with it. Perhaps you didn't do an open(), or
278 did it in another package.
280 =item Bad free() ignored
282 (S) An internal routine called free() on something that had never been
283 malloc()ed in the first place. Mandatory, but can be disabled by
284 setting environment variable C<PERL_BADFREE> to 1.
286 This message can be quite often seen with DB_File on systems with
287 "hard" dynamic linking, like C<AIX> and C<OS/2>. It is a bug of
288 C<Berkeley DB> which is left unnoticed if C<DB> uses I<forgiving>
291 =item Bad name after %s::
293 (F) You started to name a symbol by using a package prefix, and then didn't
294 finish the symbol. In particular, you can't interpolate outside of quotes,
303 $sym = "mypack::$var";
305 =item Bad symbol for array
307 (P) An internal request asked to add an array entry to something that
308 wasn't a symbol table entry.
310 =item Bad symbol for filehandle
312 (P) An internal request asked to add a filehandle entry to something that
313 wasn't a symbol table entry.
315 =item Bad symbol for hash
317 (P) An internal request asked to add a hash entry to something that
318 wasn't a symbol table entry.
320 =item Badly placed ()'s
322 (A) You've accidentally run your script through B<csh> instead
323 of Perl. Check the E<lt>#!E<gt> line, or manually feed your script
326 =item BEGIN failed--compilation aborted
328 (F) An untrapped exception was raised while executing a BEGIN subroutine.
329 Compilation stops immediately and the interpreter is exited.
331 =item bind() on closed fd
333 (W) You tried to do a bind on a closed socket. Did you forget to check
334 the return value of your socket() call? See L<perlfunc/bind>.
336 =item Bizarre copy of %s in %s
338 (P) Perl detected an attempt to copy an internal value that is not copiable.
340 =item Callback called exit
342 (F) A subroutine invoked from an external package via perl_call_sv()
343 exited by calling exit.
345 =item Can't "last" outside a block
347 (F) A "last" statement was executed to break out of the current block,
348 except that there's this itty bitty problem called there isn't a
349 current block. Note that an "if" or "else" block doesn't count as a
350 "loopish" block. You can usually double the curlies to get the same
351 effect though, because the inner curlies will be considered a block
352 that loops once. See L<perlfunc/last>.
354 =item Can't "next" outside a block
356 (F) A "next" statement was executed to reiterate the current block, but
357 there isn't a current block. Note that an "if" or "else" block doesn't
358 count as a "loopish" block. You can usually double the curlies to get
359 the same effect though, because the inner curlies will be considered a block
360 that loops once. See L<perlfunc/last>.
362 =item Can't "redo" outside a block
364 (F) A "redo" statement was executed to restart the current block, but
365 there isn't a current block. Note that an "if" or "else" block doesn't
366 count as a "loopish" block. You can usually double the curlies to get
367 the same effect though, because the inner curlies will be considered a block
368 that loops once. See L<perlfunc/last>.
370 =item Can't bless non-reference value
372 (F) Only hard references may be blessed. This is how Perl "enforces"
373 encapsulation of objects. See L<perlobj>.
375 =item Can't break at that line
377 (S) A warning intended for while running within the debugger, indicating
378 the line number specified wasn't the location of a statement that could
381 =item Can't call method "%s" in empty package "%s"
383 (F) You called a method correctly, and it correctly indicated a package
384 functioning as a class, but that package doesn't have ANYTHING defined
385 in it, let alone methods. See L<perlobj>.
387 =item Can't call method "%s" on unblessed reference
389 (F) A method call must know what package it's supposed to run in. It
390 ordinarily finds this out from the object reference you supply, but
391 you didn't supply an object reference in this case. A reference isn't
392 an object reference until it has been blessed. See L<perlobj>.
394 =item Can't call method "%s" without a package or object reference
396 (F) You used the syntax of a method call, but the slot filled by the
397 object reference or package name contains an expression that returns
398 neither an object reference nor a package name. (Perhaps it's null?)
399 Something like this will reproduce the error:
402 process $BADREF 1,2,3;
403 $BADREF->process(1,2,3);
405 =item Can't chdir to %s
407 (F) You called C<perl -x/foo/bar>, but C</foo/bar> is not a directory
408 that you can chdir to, possibly because it doesn't exist.
410 =item Can't coerce %s to integer in %s
412 (F) Certain types of SVs, in particular real symbol table entries
413 (typeglobs), can't be forced to stop being what they are. So you can't
423 but then $foo no longer contains a glob.
425 =item Can't coerce %s to number in %s
427 (F) Certain types of SVs, in particular real symbol table entries
428 (typeglobs), can't be forced to stop being what they are.
430 =item Can't coerce %s to string in %s
432 (F) Certain types of SVs, in particular real symbol table entries
433 (typeglobs), can't be forced to stop being what they are.
435 =item Can't create pipe mailbox
437 (P) An error peculiar to VMS. The process is suffering from exhausted quotas
438 or other plumbing problems.
440 =item Can't declare %s in my
442 (F) Only scalar, array, and hash variables may be declared as lexical variables.
443 They must have ordinary identifiers as names.
445 =item Can't do inplace edit on %s: %s
447 (S) The creation of the new file failed for the indicated reason.
449 =item Can't do in-place edit without backup
451 (F) You're on a system such as MSDOS that gets confused if you try reading
452 from a deleted (but still opened) file. You have to say B<-i>C<.bak>, or some
455 =item Can't do inplace edit: %s E<gt> 14 characters
457 (S) There isn't enough room in the filename to make a backup name for the file.
459 =item Can't do inplace edit: %s is not a regular file
461 (S) You tried to use the B<-i> switch on a special file, such as a file in
462 /dev, or a FIFO. The file was ignored.
464 =item Can't do setegid!
466 (P) The setegid() call failed for some reason in the setuid emulator
469 =item Can't do seteuid!
471 (P) The setuid emulator of suidperl failed for some reason.
473 =item Can't do setuid
475 (F) This typically means that ordinary perl tried to exec suidperl to
476 do setuid emulation, but couldn't exec it. It looks for a name of the
477 form sperl5.000 in the same directory that the perl executable resides
478 under the name perl5.000, typically /usr/local/bin on Unix machines.
479 If the file is there, check the execute permissions. If it isn't, ask
480 your sysadmin why he and/or she removed it.
482 =item Can't do waitpid with flags
484 (F) This machine doesn't have either waitpid() or wait4(), so only waitpid()
485 without flags is emulated.
487 =item Can't do {n,m} with n E<gt> m
489 (F) Minima must be less than or equal to maxima. If you really want
490 your regexp to match something 0 times, just put {0}. See L<perlre>.
492 =item Can't emulate -%s on #! line
494 (F) The #! line specifies a switch that doesn't make sense at this point.
495 For example, it'd be kind of silly to put a B<-x> on the #! line.
497 =item Can't exec "%s": %s
499 (W) An system(), exec(), or piped open call could not execute the named
500 program for the indicated reason. Typical reasons include: the permissions
501 were wrong on the file, the file wasn't found in C<$ENV{PATH}>, the
502 executable in question was compiled for another architecture, or the
503 #! line in a script points to an interpreter that can't be run for
504 similar reasons. (Or maybe your system doesn't support #! at all.)
508 (F) Perl was trying to execute the indicated program for you because that's
509 what the #! line said. If that's not what you wanted, you may need to
510 mention "perl" on the #! line somewhere.
512 =item Can't execute %s
514 (F) You used the B<-S> switch, but the script to execute could not be found
515 in the PATH, or at least not with the correct permissions.
517 =item Can't find label %s
519 (F) You said to goto a label that isn't mentioned anywhere that it's possible
520 for us to go to. See L<perlfunc/goto>.
522 =item Can't find string terminator %s anywhere before EOF
524 (F) Perl strings can stretch over multiple lines. This message means that
525 the closing delimiter was omitted. Because bracketed quotes count nesting
526 levels, the following is missing its final parenthesis:
528 print q(The character '(' starts a side comment.)
532 (F) A fatal error occurred while trying to fork while opening a pipeline.
534 =item Unsupported function fork
536 (F) Your version of executable does not support forking.
538 Note that under some systems, like OS/2, there may be different flavors of
539 Perl executables, some of which may support fork, some not. Try changing
540 the name you call Perl by to C<perl_>, C<perl__>, and so on.
542 =item Can't get filespec - stale stat buffer?
544 (S) A warning peculiar to VMS. This arises because of the difference between
545 access checks under VMS and under the Unix model Perl assumes. Under VMS,
546 access checks are done by filename, rather than by bits in the stat buffer, so
547 that ACLs and other protections can be taken into account. Unfortunately, Perl
548 assumes that the stat buffer contains all the necessary information, and passes
549 it, instead of the filespec, to the access checking routine. It will try to
550 retrieve the filespec using the device name and FID present in the stat buffer,
551 but this works only if you haven't made a subsequent call to the CRTL stat()
552 routine, because the device name is overwritten with each call. If this warning
553 appears, the name lookup failed, and the access checking routine gave up and
554 returned FALSE, just to be conservative. (Note: The access checking routine
555 knows about the Perl C<stat> operator and file tests, so you shouldn't ever
556 see this warning in response to a Perl command; it arises only if some internal
557 code takes stat buffers lightly.)
559 =item Can't get pipe mailbox device name
561 (P) An error peculiar to VMS. After creating a mailbox to act as a pipe, Perl
562 can't retrieve its name for later use.
564 =item Can't get SYSGEN parameter value for MAXBUF
566 (P) An error peculiar to VMS. Perl asked $GETSYI how big you want your
567 mailbox buffers to be, and didn't get an answer.
569 =item Can't goto subroutine outside a subroutine
571 (F) The deeply magical "goto subroutine" call can only replace one subroutine
572 call for another. It can't manufacture one out of whole cloth. In general
573 you should be calling it out of only an AUTOLOAD routine anyway. See
576 =item Can't localize a reference
578 (F) You said something like C<local $$ref>, which is not allowed because
579 the compiler can't determine whether $ref will end up pointing to anything
580 with a symbol table entry, and a symbol table entry is necessary to
583 =item Can't localize lexical variable %s
585 (F) You used local on a variable name that was previously declared as a
586 lexical variable using "my". This is not allowed. If you want to
587 localize a package variable of the same name, qualify it with the
590 =item Can't locate %s in @INC
592 (F) You said to do (or require, or use) a file that couldn't be found
593 in any of the libraries mentioned in @INC. Perhaps you need to set
594 the PERL5LIB environment variable to say where the extra library is,
595 or maybe the script needs to add the library name to @INC. Or maybe
596 you just misspelled the name of the file. See L<perlfunc/require>.
598 =item Can't locate object method "%s" via package "%s"
600 (F) You called a method correctly, and it correctly indicated a package
601 functioning as a class, but that package doesn't define that particular
602 method, nor does any of its base classes. See L<perlobj>.
604 =item Can't locate package %s for @%s::ISA
606 (W) The @ISA array contained the name of another package that doesn't seem
611 (F) The mktemp() routine failed for some reason while trying to process
612 a B<-e> switch. Maybe your /tmp partition is full, or clobbered.
614 =item Can't modify %s in %s
616 (F) You aren't allowed to assign to the item indicated, or otherwise try to
617 change it, such as with an auto-increment.
619 =item Can't modify non-existent substring
621 (P) The internal routine that does assignment to a substr() was handed
624 =item Can't msgrcv to read-only var
626 (F) The target of a msgrcv must be modifiable to be used as a receive
629 =item Can't open %s: %s
631 (S) An inplace edit couldn't open the original file for the indicated reason.
632 Usually this is because you don't have read permission for the file.
634 =item Can't open bidirectional pipe
636 (W) You tried to say C<open(CMD, "|cmd|")>, which is not supported. You can
637 try any of several modules in the Perl library to do this, such as
638 IPC::Open2. Alternately, direct the pipe's output to a file using "E<gt>",
639 and then read it in under a different file handle.
641 =item Can't open error file %s as stderr
643 (F) An error peculiar to VMS. Perl does its own command line redirection, and
644 couldn't open the file specified after '2E<gt>' or '2E<gt>E<gt>' on the
645 command line for writing.
647 =item Can't open input file %s as stdin
649 (F) An error peculiar to VMS. Perl does its own command line redirection, and
650 couldn't open the file specified after 'E<lt>' on the command line for reading.
652 =item Can't open output file %s as stdout
654 (F) An error peculiar to VMS. Perl does its own command line redirection, and
655 couldn't open the file specified after 'E<gt>' or 'E<gt>E<gt>' on the command
658 =item Can't open output pipe (name: %s)
660 (P) An error peculiar to VMS. Perl does its own command line redirection, and
661 couldn't open the pipe into which to send data destined for stdout.
663 =item Can't open perl script "%s": %s
665 (F) The script you specified can't be opened for the indicated reason.
667 =item Can't rename %s to %s: %s, skipping file
669 (S) The rename done by the B<-i> switch failed for some reason, probably because
670 you don't have write permission to the directory.
672 =item Can't reopen input pipe (name: %s) in binary mode
674 (P) An error peculiar to VMS. Perl thought stdin was a pipe, and tried to
675 reopen it to accept binary data. Alas, it failed.
677 =item Can't reswap uid and euid
679 (P) The setreuid() call failed for some reason in the setuid emulator
682 =item Can't return outside a subroutine
684 (F) The return statement was executed in mainline code, that is, where
685 there was no subroutine call to return out of. See L<perlsub>.
687 =item Can't stat script "%s"
689 (P) For some reason you can't fstat() the script even though you have
690 it open already. Bizarre.
692 =item Can't swap uid and euid
694 (P) The setreuid() call failed for some reason in the setuid emulator
697 =item Can't take log of %g
699 (F) Logarithms are defined on only positive real numbers.
701 =item Can't take sqrt of %g
703 (F) For ordinary real numbers, you can't take the square root of a
704 negative number. There's a Complex package available for Perl, though,
705 if you really want to do that.
707 =item Can't undef active subroutine
709 (F) You can't undefine a routine that's currently running. You can,
710 however, redefine it while it's running, and you can even undef the
711 redefined subroutine while the old routine is running. Go figure.
715 (F) You tried to unshift an "unreal" array that can't be unshifted, such
716 as the main Perl stack.
718 =item Can't upgrade that kind of scalar
720 (P) The internal sv_upgrade routine adds "members" to an SV, making
721 it into a more specialized kind of SV. The top several SV types are
722 so specialized, however, that they cannot be interconverted. This
723 message indicates that such a conversion was attempted.
725 =item Can't upgrade to undef
727 (P) The undefined SV is the bottom of the totem pole, in the scheme
728 of upgradability. Upgrading to undef indicates an error in the
729 code calling sv_upgrade.
731 =item Can't use "my %s" in sort comparison
733 (F) The global variables $a and $b are reserved for sort comparisons.
734 You mentioned $a or $b in the same line as the E<lt>=E<gt> or cmp operator,
735 and the variable had earlier been declared as a lexical variable.
736 Either qualify the sort variable with the package name, or rename the
739 =item Can't use %s for loop variable
741 (F) Only a simple scalar variable may be used as a loop variable on a foreach.
743 =item Can't use %s ref as %s ref
745 (F) You've mixed up your reference types. You have to dereference a
746 reference of the type needed. You can use the ref() function to
747 test the type of the reference, if need be.
749 =item Can't use \1 to mean $1 in expression
751 (W) In an ordinary expression, backslash is a unary operator that creates
752 a reference to its argument. The use of backslash to indicate a backreference
753 to a matched substring is valid only as part of a regular expression pattern.
754 Trying to do this in ordinary Perl code produces a value that prints
755 out looking like SCALAR(0xdecaf). Use the $1 form instead.
757 =item Can't use string ("%s") as %s ref while "strict refs" in use
759 (F) Only hard references are allowed by "strict refs". Symbolic references
760 are disallowed. See L<perlref>.
762 =item Can't use an undefined value as %s reference
764 (F) A value used as either a hard reference or a symbolic reference must
765 be a defined value. This helps to de-lurk some insidious errors.
767 =item Can't use global %s in "my"
769 (F) You tried to declare a magical variable as a lexical variable. This is
770 not allowed, because the magic can be tied to only one location (namely
771 the global variable) and it would be incredibly confusing to have
772 variables in your program that looked like magical variables but
775 =item Can't use subscript on %s
777 (F) The compiler tried to interpret a bracketed expression as a
778 subscript. But to the left of the brackets was an expression that
779 didn't look like an array reference, or anything else subscriptable.
781 =item Can't write to temp file for B<-e>: %s
783 (F) The write routine failed for some reason while trying to process
784 a B<-e> switch. Maybe your /tmp partition is full, or clobbered.
786 =item Can't x= to read-only value
788 (F) You tried to repeat a constant value (often the undefined value) with
789 an assignment operator, which implies modifying the value itself.
790 Perhaps you need to copy the value to a temporary, and repeat that.
792 =item Cannot open temporary file
794 (F) The create routine failed for some reason while trying to process
795 a B<-e> switch. Maybe your /tmp partition is full, or clobbered.
797 =item chmod: mode argument is missing initial 0
799 (W) A novice will sometimes say
803 not realizing that 777 will be interpreted as a decimal number, equivalent
804 to 01411. Octal constants are introduced with a leading 0 in Perl, as in C.
806 =item Close on unopened file E<lt>%sE<gt>
808 (W) You tried to close a filehandle that was never opened.
810 =item connect() on closed fd
812 (W) You tried to do a connect on a closed socket. Did you forget to check
813 the return value of your socket() call? See L<perlfunc/connect>.
815 =item Constant subroutine %s redefined
817 (S) You redefined a subroutine which had previously been eligible for
818 inlining. See L<perlsub/"Constant Functions"> for commentary and
821 =item Corrupt malloc ptr 0x%lx at 0x%lx
823 (P) The malloc package that comes with Perl had an internal failure.
825 =item corrupted regexp pointers
827 (P) The regular expression engine got confused by what the regular
828 expression compiler gave it.
830 =item corrupted regexp program
832 (P) The regular expression engine got passed a regexp program without
833 a valid magic number.
835 =item Deep recursion on subroutine "%s"
837 (W) This subroutine has called itself (directly or indirectly) 100
838 times than it has returned. This probably indicates an infinite
839 recursion, unless you're writing strange benchmark programs, in which
840 case it indicates something else.
842 =item Did you mean &%s instead?
844 (W) You probably referred to an imported subroutine &FOO as $FOO or some such.
846 =item Did you mean $ or @ instead of %?
848 (W) You probably said %hash{$key} when you meant $hash{$key} or @hash{@keys}.
849 On the other hand, maybe you just meant %hash and got carried away.
853 (F) You passed die() an empty string (the equivalent of C<die "">) or
854 you called it with no args and both C<$@> and C<$_> were empty.
856 =item Do you need to pre-declare %s?
858 (S) This is an educated guess made in conjunction with the message "%s
859 found where operator expected". It often means a subroutine or module
860 name is being referenced that hasn't been declared yet. This may be
861 because of ordering problems in your file, or because of a missing
862 "sub", "package", "require", or "use" statement. If you're
863 referencing something that isn't defined yet, you don't actually have
864 to define the subroutine or package before the current location. You
865 can use an empty "sub foo;" or "package FOO;" to enter a "forward"
868 =item Don't know how to handle magic of type '%s'
870 (P) The internal handling of magical variables has been cursed.
872 =item do_study: out of memory
874 (P) This should have been caught by safemalloc() instead.
876 =item Duplicate free() ignored
878 (S) An internal routine called free() on something that had already
881 =item elseif should be elsif
883 (S) There is no keyword "elseif" in Perl because Larry thinks it's
884 ugly. Your code will be interpreted as an attempt to call a method
885 named "elseif" for the class returned by the following block. This is
886 unlikely to be what you want.
888 =item END failed--cleanup aborted
890 (F) An untrapped exception was raised while executing an END subroutine.
891 The interpreter is immediately exited.
893 =item Error converting file specification %s
895 (F) An error peculiar to VMS. Because Perl may have to deal with file
896 specifications in either VMS or Unix syntax, it converts them to a
897 single form when it must operate on them directly. Either you've
898 passed an invalid file specification to Perl, or you've found a
899 case the conversion routines don't handle. Drat.
901 =item Execution of %s aborted due to compilation errors.
903 (F) The final summary message when a Perl compilation fails.
905 =item Exiting eval via %s
907 (W) You are exiting an eval by unconventional means, such as
908 a goto, or a loop control statement.
910 =item Exiting subroutine via %s
912 (W) You are exiting a subroutine by unconventional means, such as
913 a goto, or a loop control statement.
915 =item Exiting substitution via %s
917 (W) You are exiting a substitution by unconventional means, such as
918 a return, a goto, or a loop control statement.
920 =item Fatal VMS error at %s, line %d
922 (P) An error peculiar to VMS. Something untoward happened in a VMS system
923 service or RTL routine; Perl's exit status should provide more details. The
924 filename in "at %s" and the line number in "line %d" tell you which section of
925 the Perl source code is distressed.
927 =item fcntl is not implemented
929 (F) Your machine apparently doesn't implement fcntl(). What is this, a
932 =item Filehandle %s never opened
934 (W) An I/O operation was attempted on a filehandle that was never initialized.
935 You need to do an open() or a socket() call, or call a constructor from
936 the FileHandle package.
938 =item Filehandle %s opened for only input
940 (W) You tried to write on a read-only filehandle. If you
941 intended it to be a read-write filehandle, you needed to open it with
942 "+E<lt>" or "+E<gt>" or "+E<gt>E<gt>" instead of with "E<lt>" or nothing. If
943 you intended only to write the file, use "E<gt>" or "E<gt>E<gt>". See
946 =item Filehandle opened for only input
948 (W) You tried to write on a read-only filehandle. If you
949 intended it to be a read-write filehandle, you needed to open it with
950 "+E<lt>" or "+E<gt>" or "+E<gt>E<gt>" instead of with "E<lt>" or nothing. If
951 you intended only to write the file, use "E<gt>" or "E<gt>E<gt>". See
954 =item Final $ should be \$ or $name
956 (F) You must now decide whether the final $ in a string was meant to be
957 a literal dollar sign, or was meant to introduce a variable name
958 that happens to be missing. So you have to put either the backslash or
961 =item Final @ should be \@ or @name
963 (F) You must now decide whether the final @ in a string was meant to be
964 a literal "at" sign, or was meant to introduce a variable name
965 that happens to be missing. So you have to put either the backslash or
968 =item Format %s redefined
970 (W) You redefined a format. To suppress this warning, say
974 eval "format NAME =...";
977 =item Format not terminated
979 (F) A format must be terminated by a line with a solitary dot. Perl got
980 to the end of your file without finding such a line.
982 =item Found = in conditional, should be ==
992 (or something like that).
994 =item gdbm store returned %d, errno %d, key "%s"
996 (S) A warning from the GDBM_File extension that a store failed.
998 =item gethostent not implemented
1000 (F) Your C library apparently doesn't implement gethostent(), probably
1001 because if it did, it'd feel morally obligated to return every hostname
1004 =item get{sock,peer}name() on closed fd
1006 (W) You tried to get a socket or peer socket name on a closed socket.
1007 Did you forget to check the return value of your socket() call?
1009 =item getpwnam returned invalid UIC %#o for user "%s"
1011 (S) A warning peculiar to VMS. The call to C<sys$getuai> underlying the
1012 C<getpwnam> operator returned an invalid UIC.
1015 =item Glob not terminated
1017 (F) The lexer saw a left angle bracket in a place where it was expecting
1018 a term, so it's looking for the corresponding right angle bracket, and not
1019 finding it. Chances are you left some needed parentheses out earlier in
1020 the line, and you really meant a "less than".
1022 =item Global symbol "%s" requires explicit package name
1024 (F) You've said "use strict vars", which indicates that all variables must
1025 either be lexically scoped (using "my"), or explicitly qualified to
1026 say which package the global variable is in (using "::").
1028 =item goto must have label
1030 (F) Unlike with "next" or "last", you're not allowed to goto an
1031 unspecified destination. See L<perlfunc/goto>.
1033 =item Had to create %s unexpectedly
1035 (S) A routine asked for a symbol from a symbol table that ought to have
1036 existed already, but for some reason it didn't, and had to be created on
1037 an emergency basis to prevent a core dump.
1039 =item Hash %%s missing the % in argument %d of %s()
1041 (D) Really old Perl let you omit the % on hash names in some spots. This
1042 is now heavily deprecated.
1044 =item Ill-formed logical name |%s| in prime_env_iter
1046 (W) A warning peculiar to VMS. A logical name was encountered when preparing
1047 to iterate over %ENV which violates the syntactic rules governing logical
1048 names. Because it cannot be translated normally, it is skipped, and will not
1049 appear in %ENV. This may be a benign occurrence, as some software packages
1050 might directly modify logical name tables and introduce non-standard names,
1051 or it may indicate that a logical name table has been corrupted.
1053 =item Illegal division by zero
1055 (F) You tried to divide a number by 0. Either something was wrong in your
1056 logic, or you need to put a conditional in to guard against meaningless input.
1058 =item Illegal modulus zero
1060 (F) You tried to divide a number by 0 to get the remainder. Most numbers
1061 don't take to this kindly.
1063 =item Illegal octal digit
1065 (F) You used an 8 or 9 in a octal number.
1067 =item Illegal octal digit ignored
1069 (W) You may have tried to use an 8 or 9 in a octal number. Interpretation
1070 of the octal number stopped before the 8 or 9.
1072 =item Insecure dependency in %s
1074 (F) You tried to do something that the tainting mechanism didn't like.
1075 The tainting mechanism is turned on when you're running setuid or setgid,
1076 or when you specify B<-T> to turn it on explicitly. The tainting mechanism
1077 labels all data that's derived directly or indirectly from the user,
1078 who is considered to be unworthy of your trust. If any such data is
1079 used in a "dangerous" operation, you get this error. See L<perlsec>
1080 for more information.
1082 =item Insecure directory in %s
1084 (F) You can't use system(), exec(), or a piped open in a setuid or setgid
1085 script if C<$ENV{PATH}> contains a directory that is writable by the world.
1090 (F) You can't use system(), exec(), or a piped open in a setuid or
1091 setgid script if C<$ENV{PATH}> is derived from data supplied (or
1092 potentially supplied) by the user. The script must set the path to a
1093 known value, using trustworthy data. See L<perlsec>.
1095 =item Integer overflow in hex number
1097 (S) The literal hex number you have specified is too big for your
1098 architecture. On a 32-bit architecture the largest hex literal is
1101 =item Integer overflow in octal number
1103 (S) The literal octal number you have specified is too big for your
1104 architecture. On a 32-bit architecture the largest octal literal is
1107 =item Internal inconsistency in tracking vforks
1109 (S) A warning peculiar to VMS. Perl keeps track of the number
1110 of times you've called C<fork> and C<exec>, to determine
1111 whether the current call to C<exec> should affect the current
1112 script or a subprocess (see L<perlvms/exec>). Somehow, this count
1113 has become scrambled, so Perl is making a guess and treating
1114 this C<exec> as a request to terminate the Perl script
1115 and execute the specified command.
1117 =item internal disaster in regexp
1119 (P) Something went badly wrong in the regular expression parser.
1121 =item internal urp in regexp at /%s/
1123 (P) Something went badly awry in the regular expression parser.
1125 =item invalid [] range in regexp
1127 (F) The range specified in a character class had a minimum character
1128 greater than the maximum character. See L<perlre>.
1130 =item ioctl is not implemented
1132 (F) Your machine apparently doesn't implement ioctl(), which is pretty
1133 strange for a machine that supports C.
1135 =item junk on end of regexp
1137 (P) The regular expression parser is confused.
1139 =item Label not found for "last %s"
1141 (F) You named a loop to break out of, but you're not currently in a
1142 loop of that name, not even if you count where you were called from.
1143 See L<perlfunc/last>.
1145 =item Label not found for "next %s"
1147 (F) You named a loop to continue, but you're not currently in a loop of
1148 that name, not even if you count where you were called from. See
1151 =item Label not found for "redo %s"
1153 (F) You named a loop to restart, but you're not currently in a loop of
1154 that name, not even if you count where you were called from. See
1157 =item listen() on closed fd
1159 (W) You tried to do a listen on a closed socket. Did you forget to check
1160 the return value of your socket() call? See L<perlfunc/listen>.
1162 =item Literal @%s now requires backslash
1164 (F) It used to be that Perl would try to guess whether you wanted an
1165 array interpolated or a literal @. It did this when the string was
1166 first used at runtime. Now strings are parsed at compile time, and
1167 ambiguous instances of @ must be disambiguated, either by putting a
1168 backslash to indicate a literal, or by declaring (or using) the array
1169 within the program before the string (lexically). (Someday it will simply
1170 assume that an unbackslashed @ interpolates an array.)
1172 =item Method for operation %s not found in package %s during blessing
1174 (F) An attempt was made to specify an entry in an overloading table that
1175 doesn't somehow point to a valid method. See L<overload>.
1177 =item Might be a runaway multi-line %s string starting on line %d
1179 (S) An advisory indicating that the previous error may have been caused
1180 by a missing delimiter on a string or pattern, because it eventually
1181 ended earlier on the current line.
1183 =item Misplaced _ in number
1185 (W) An underline in a decimal constant wasn't on a 3-digit boundary.
1187 =item Missing $ on loop variable
1189 (F) Apparently you've been programming in B<csh> too much. Variables are always
1190 mentioned with the $ in Perl, unlike in the shells, where it can vary from
1191 one line to the next.
1193 =item Missing comma after first argument to %s function
1195 (F) While certain functions allow you to specify a filehandle or an
1196 "indirect object" before the argument list, this ain't one of them.
1198 =item Missing operator before %s?
1200 (S) This is an educated guess made in conjunction with the message "%s
1201 found where operator expected". Often the missing operator is a comma.
1203 =item Missing right bracket
1205 (F) The lexer counted more opening curly brackets (braces) than closing ones.
1206 As a general rule, you'll find it's missing near the place you were last
1209 =item Missing semicolon on previous line?
1211 (S) This is an educated guess made in conjunction with the message "%s
1212 found where operator expected". Don't automatically put a semicolon on
1213 the previous line just because you saw this message.
1215 =item Modification of a read-only value attempted
1217 (F) You tried, directly or indirectly, to change the value of a
1218 constant. You didn't, of course, try "2 = 1", because the compiler
1219 catches that. But an easy way to do the same thing is:
1221 sub mod { $_[0] = 1 }
1224 Another way is to assign to a substr() that's off the end of the string.
1226 =item Modification of non-creatable array value attempted, subscript %d
1228 (F) You tried to make an array value spring into existence, and the
1229 subscript was probably negative, even counting from end of the array
1232 =item Modification of non-creatable hash value attempted, subscript "%s"
1234 (F) You tried to make a hash value spring into existence, and it couldn't
1235 be created for some peculiar reason.
1237 =item Module name must be constant
1239 (F) Only a bare module name is allowed as the first argument to a "use".
1241 =item msg%s not implemented
1243 (F) You don't have System V message IPC on your system.
1245 =item Multidimensional syntax %s not supported
1247 (W) Multidimensional arrays aren't written like C<$foo[1,2,3]>. They're written
1248 like C<$foo[1][2][3]>, as in C.
1250 =item Name "%s::%s" used only once: possible typo
1252 (W) Typographical errors often show up as unique variable names. If you
1253 had a good reason for having a unique name, then just mention it
1254 again somehow to suppress the message (the C<use vars> pragma is
1255 provided for just this purpose).
1257 =item Negative length
1259 (F) You tried to do a read/write/send/recv operation with a buffer length
1260 that is less than 0. This is difficult to imagine.
1262 =item nested *?+ in regexp
1264 (F) You can't quantify a quantifier without intervening parentheses. So
1265 things like ** or +* or ?* are illegal.
1267 Note, however, that the minimal matching quantifiers, C<*?>, C<+?>, and C<??> appear
1268 to be nested quantifiers, but aren't. See L<perlre>.
1272 (F) The setuid emulator requires that scripts have a well-formed #! line
1273 even on machines that don't support the #! construct.
1275 =item No %s allowed while running setuid
1277 (F) Certain operations are deemed to be too insecure for a setuid or setgid
1278 script to even be allowed to attempt. Generally speaking there will be
1279 another way to do what you want that is, if not secure, at least securable.
1282 =item No B<-e> allowed in setuid scripts
1284 (F) A setuid script can't be specified by the user.
1286 =item No comma allowed after %s
1288 (F) A list operator that has a filehandle or "indirect object" is not
1289 allowed to have a comma between that and the following arguments.
1290 Otherwise it'd be just another one of the arguments.
1292 =item No command into which to pipe on command line
1294 (F) An error peculiar to VMS. Perl handles its own command line redirection,
1295 and found a '|' at the end of the command line, so it doesn't know whither you
1296 want to pipe the output from this command.
1298 =item No DB::DB routine defined
1300 (F) The currently executing code was compiled with the B<-d> switch,
1301 but for some reason the perl5db.pl file (or some facsimile thereof)
1302 didn't define a routine to be called at the beginning of each
1303 statement. Which is odd, because the file should have been required
1304 automatically, and should have blown up the require if it didn't parse
1307 =item No dbm on this machine
1309 (P) This is counted as an internal error, because every machine should
1310 supply dbm nowadays, because Perl comes with SDBM. See L<SDBM_File>.
1312 =item No DBsub routine
1314 (F) The currently executing code was compiled with the B<-d> switch,
1315 but for some reason the perl5db.pl file (or some facsimile thereof)
1316 didn't define a DB::sub routine to be called at the beginning of each
1317 ordinary subroutine call.
1319 =item No error file after 2E<gt> or 2E<gt>E<gt> on command line
1321 (F) An error peculiar to VMS. Perl handles its own command line redirection,
1322 and found a '2E<gt>' or a '2E<gt>E<gt>' on the command line, but can't find
1323 the name of the file to which to write data destined for stderr.
1325 =item No input file after E<lt> on command line
1327 (F) An error peculiar to VMS. Perl handles its own command line redirection,
1328 and found a 'E<lt>' on the command line, but can't find the name of the file
1329 from which to read data for stdin.
1331 =item No output file after E<gt> on command line
1333 (F) An error peculiar to VMS. Perl handles its own command line redirection,
1334 and found a lone 'E<gt>' at the end of the command line, so it doesn't know
1335 whither you wanted to redirect stdout.
1337 =item No output file after E<gt> or E<gt>E<gt> on command line
1339 (F) An error peculiar to VMS. Perl handles its own command line redirection,
1340 and found a 'E<gt>' or a 'E<gt>E<gt>' on the command line, but can't find the
1341 name of the file to which to write data destined for stdout.
1343 =item No Perl script found in input
1345 (F) You called C<perl -x>, but no line was found in the file beginning
1346 with #! and containing the word "perl".
1348 =item No setregid available
1350 (F) Configure didn't find anything resembling the setregid() call for
1353 =item No setreuid available
1355 (F) Configure didn't find anything resembling the setreuid() call for
1358 =item No space allowed after B<-I>
1360 (F) The argument to B<-I> must follow the B<-I> immediately with no
1363 =item No such pipe open
1365 (P) An error peculiar to VMS. The internal routine my_pclose() tried to
1366 close a pipe which hadn't been opened. This should have been caught earlier as
1367 an attempt to close an unopened filehandle.
1369 =item No such signal: SIG%s
1371 (W) You specified a signal name as a subscript to %SIG that was not recognized.
1372 Say C<kill -l> in your shell to see the valid signal names on your system.
1374 =item Not a CODE reference
1376 (F) Perl was trying to evaluate a reference to a code value (that is, a
1377 subroutine), but found a reference to something else instead. You can
1378 use the ref() function to find out what kind of ref it really was.
1379 See also L<perlref>.
1381 =item Not a format reference
1383 (F) I'm not sure how you managed to generate a reference to an anonymous
1384 format, but this indicates you did, and that it didn't exist.
1386 =item Not a GLOB reference
1388 (F) Perl was trying to evaluate a reference to a "typeglob" (that is,
1389 a symbol table entry that looks like C<*foo>), but found a reference to
1390 something else instead. You can use the ref() function to find out
1391 what kind of ref it really was. See L<perlref>.
1393 =item Not a HASH reference
1395 (F) Perl was trying to evaluate a reference to a hash value, but
1396 found a reference to something else instead. You can use the ref()
1397 function to find out what kind of ref it really was. See L<perlref>.
1399 =item Not a perl script
1401 (F) The setuid emulator requires that scripts have a well-formed #! line
1402 even on machines that don't support the #! construct. The line must
1405 =item Not a SCALAR reference
1407 (F) Perl was trying to evaluate a reference to a scalar value, but
1408 found a reference to something else instead. You can use the ref()
1409 function to find out what kind of ref it really was. See L<perlref>.
1411 =item Not a subroutine reference
1413 (F) Perl was trying to evaluate a reference to a code value (that is, a
1414 subroutine), but found a reference to something else instead. You can
1415 use the ref() function to find out what kind of ref it really was.
1416 See also L<perlref>.
1418 =item Not a subroutine reference in %OVERLOAD
1420 (F) An attempt was made to specify an entry in an overloading table that
1421 doesn't somehow point to a valid subroutine. See L<overload>.
1423 =item Not an ARRAY reference
1425 (F) Perl was trying to evaluate a reference to an array value, but
1426 found a reference to something else instead. You can use the ref()
1427 function to find out what kind of ref it really was. See L<perlref>.
1429 =item Not enough arguments for %s
1431 (F) The function requires more arguments than you specified.
1433 =item Not enough format arguments
1435 (W) A format specified more picture fields than the next line supplied.
1438 =item Null filename used
1440 (F) You can't require the null filename, especially because on many machines
1441 that means the current directory! See L<perlfunc/require>.
1443 =item Null picture in formline
1445 (F) The first argument to formline must be a valid format picture
1446 specification. It was found to be empty, which probably means you
1447 supplied it an uninitialized value. See L<perlform>.
1449 =item NULL OP IN RUN
1451 (P) Some internal routine called run() with a null opcode pointer.
1455 (P) An attempt was made to realloc NULL.
1457 =item NULL regexp argument
1459 (P) The internal pattern matching routines blew it big time.
1461 =item NULL regexp parameter
1463 (P) The internal pattern matching routines are out of their gourd.
1465 =item Odd number of elements in hash list
1467 (S) You specified an odd number of elements to a hash list, which is odd,
1468 because hash lists come in key/value pairs.
1470 =item Offset outside string
1472 (F) You tried to do a read/write/send/recv operation with an offset
1473 pointing outside the buffer. This is difficult to imagine.
1474 The sole exception to this is that C<sysread()>ing past the buffer
1475 will extend the buffer and zero pad the new area.
1479 (S) An internal warning that the grammar is screwed up.
1483 (S) An internal warning that the grammar is screwed up.
1485 =item Operation `%s' %s: no method found,
1487 (F) An attempt was made to use an entry in an overloading table that
1488 somehow no longer points to a valid method. See L<overload>.
1490 =item Stub found while resolving method `%s' overloading `%s' in package `%s'
1492 (P) Overloading resolution over @ISA tree may be broken by importing stubs.
1493 Stubs should never be implicitely created, but explicit calls to C<can>
1496 =item Cannot resolve method `%s' overloading `%s' in package `s'
1498 (P) Internal error trying to resolve overloading specified by a method
1499 name (as opposed to a subroutine reference).
1501 =item Operator or semicolon missing before %s
1503 (S) You used a variable or subroutine call where the parser was
1504 expecting an operator. The parser has assumed you really meant
1505 to use an operator, but this is highly likely to be incorrect.
1506 For example, if you say "*foo *foo" it will be interpreted as
1507 if you said "*foo * 'foo'".
1509 =item Out of memory for yacc stack
1511 (F) The yacc parser wanted to grow its stack so it could continue parsing,
1512 but realloc() wouldn't give it more memory, virtual or otherwise.
1514 =item Out of memory!
1516 (X|F) The malloc() function returned 0, indicating there was insufficient
1517 remaining memory (or virtual memory) to satisfy the request.
1519 The request was judged to be small, so the possibility to trap it
1520 depends on the way perl was compiled. By default it is not trappable.
1521 However, if compiled for this, Perl may use the contents of C<$^M> as
1522 an emergency pool after die()ing with this message. In this case the
1523 error is trappable I<once>.
1525 =item Out of memory during request for %s
1527 (F) The malloc() function returned 0, indicating there was insufficient
1528 remaining memory (or virtual memory) to satisfy the request. However,
1529 the request was judged large enough (compile-time default is 64K), so
1530 a possibility to shut down by trapping this error is granted.
1534 (W) A single call to write() produced more lines than can fit on a page.
1537 =item panic: ck_grep
1539 (P) Failed an internal consistency check trying to compile a grep.
1541 =item panic: ck_split
1543 (P) Failed an internal consistency check trying to compile a split.
1545 =item panic: corrupt saved stack index
1547 (P) The savestack was requested to restore more localized values than there
1548 are in the savestack.
1552 (P) We popped the context stack to an eval context, and then discovered
1553 it wasn't an eval context.
1555 =item panic: do_match
1557 (P) The internal pp_match() routine was called with invalid operational data.
1559 =item panic: do_split
1561 (P) Something terrible went wrong in setting up for the split.
1563 =item panic: do_subst
1565 (P) The internal pp_subst() routine was called with invalid operational data.
1567 =item panic: do_trans
1569 (P) The internal do_trans() routine was called with invalid operational data.
1573 (P) We popped the context stack to a context with the specified label,
1574 and then discovered it wasn't a context we know how to do a goto in.
1576 =item panic: INTERPCASEMOD
1578 (P) The lexer got into a bad state at a case modifier.
1580 =item panic: INTERPCONCAT
1582 (P) The lexer got into a bad state parsing a string with brackets.
1586 (P) We popped the context stack to a block context, and then discovered
1587 it wasn't a block context.
1589 =item panic: leave_scope clearsv
1591 (P) A writable lexical variable became read-only somehow within the scope.
1593 =item panic: leave_scope inconsistency
1595 (P) The savestack probably got out of sync. At least, there was an
1596 invalid enum on the top of it.
1600 (P) Something requested a negative number of bytes of malloc.
1602 =item panic: mapstart
1604 (P) The compiler is screwed up with respect to the map() function.
1606 =item panic: null array
1608 (P) One of the internal array routines was passed a null AV pointer.
1610 =item panic: pad_alloc
1612 (P) The compiler got confused about which scratch pad it was allocating
1613 and freeing temporaries and lexicals from.
1615 =item panic: pad_free curpad
1617 (P) The compiler got confused about which scratch pad it was allocating
1618 and freeing temporaries and lexicals from.
1620 =item panic: pad_free po
1622 (P) An invalid scratch pad offset was detected internally.
1624 =item panic: pad_reset curpad
1626 (P) The compiler got confused about which scratch pad it was allocating
1627 and freeing temporaries and lexicals from.
1629 =item panic: pad_sv po
1631 (P) An invalid scratch pad offset was detected internally.
1633 =item panic: pad_swipe curpad
1635 (P) The compiler got confused about which scratch pad it was allocating
1636 and freeing temporaries and lexicals from.
1638 =item panic: pad_swipe po
1640 (P) An invalid scratch pad offset was detected internally.
1642 =item panic: pp_iter
1644 (P) The foreach iterator got called in a non-loop context frame.
1646 =item panic: realloc
1648 (P) Something requested a negative number of bytes of realloc.
1650 =item panic: restartop
1652 (P) Some internal routine requested a goto (or something like it), and
1653 didn't supply the destination.
1657 (P) We popped the context stack to a subroutine or eval context, and
1658 then discovered it wasn't a subroutine or eval context.
1660 =item panic: scan_num
1662 (P) scan_num() got called on something that wasn't a number.
1664 =item panic: sv_insert
1666 (P) The sv_insert() routine was told to remove more string than there
1669 =item panic: top_env
1671 (P) The compiler attempted to do a goto, or something weird like that.
1675 (P) The lexer got into a bad state while processing a case modifier.
1677 =item Pareneses missing around "%s" list
1679 (W) You said something like
1685 my ($foo, $bar) = @_;
1687 Remember that "my" and "local" bind closer than comma.
1689 =item Perl %3.3f required--this is only version %s, stopped
1691 (F) The module in question uses features of a version of Perl more recent
1692 than the currently running version. How long has it been since you upgraded,
1693 anyway? See L<perlfunc/require>.
1695 =item Permission denied
1697 (F) The setuid emulator in suidperl decided you were up to no good.
1699 =item pid %d not a child
1701 (W) A warning peculiar to VMS. Waitpid() was asked to wait for a process which
1702 isn't a subprocess of the current process. While this is fine from VMS'
1703 perspective, it's probably not what you intended.
1705 =item POSIX getpgrp can't take an argument
1707 (F) Your C compiler uses POSIX getpgrp(), which takes no argument, unlike
1708 the BSD version, which takes a pid.
1710 =item Possible attempt to put comments in qw() list
1712 (W) You probably wrote something like this:
1718 when you should have written this:
1724 =item Possible attempt to separate words with commas
1726 (W) You probably wrote something like this:
1730 when you should have written this:
1734 =item Possible memory corruption: %s overflowed 3rd argument
1736 (F) An ioctl() or fcntl() returned more than Perl was bargaining for.
1737 Perl guesses a reasonable buffer size, but puts a sentinel byte at the
1738 end of the buffer just in case. This sentinel byte got clobbered, and
1739 Perl assumes that memory is now corrupted. See L<perlfunc/ioctl>.
1741 =item Precedence problem: open %s should be open(%s)
1743 (S) The old irregular construct
1747 is now misinterpreted as
1751 because of the strict regularization of Perl 5's grammar into unary and
1752 list operators. (The old open was a little of both.) You must put
1753 parentheses around the filehandle, or use the new "or" operator instead of "||".
1755 =item print on closed filehandle %s
1757 (W) The filehandle you're printing on got itself closed sometime before now.
1758 Check your logic flow.
1760 =item printf on closed filehandle %s
1762 (W) The filehandle you're writing to got itself closed sometime before now.
1763 Check your logic flow.
1765 =item Probable precedence problem on %s
1767 (W) The compiler found a bare word where it expected a conditional,
1768 which often indicates that an || or && was parsed as part of the
1769 last argument of the previous construct, for example:
1773 =item Prototype mismatch: (%s) vs (%s)
1775 (S) The subroutine being defined had a pre-declared (forward) declaration
1776 with a different function prototype.
1778 =item Read on closed filehandle E<lt>%sE<gt>
1780 (W) The filehandle you're reading from got itself closed sometime before now.
1781 Check your logic flow.
1783 =item Reallocation too large: %lx
1785 (F) You can't allocate more than 64K on an MSDOS machine.
1787 =item Recompile perl with B<-D>DEBUGGING to use B<-D> switch
1789 (F) You can't use the B<-D> option unless the code to produce the
1790 desired output is compiled into Perl, which entails some overhead,
1791 which is why it's currently left out of your copy.
1793 =item Recursive inheritance detected
1795 (F) More than 100 levels of inheritance were used. Probably indicates
1796 an unintended loop in your inheritance hierarchy.
1798 =item Reference miscount in sv_replace()
1800 (W) The internal sv_replace() function was handed a new SV with a
1801 reference count of other than 1.
1803 =item regexp memory corruption
1805 (P) The regular expression engine got confused by what the regular
1806 expression compiler gave it.
1808 =item regexp out of space
1810 (P) A "can't happen" error, because safemalloc() should have caught it earlier.
1812 =item regexp too big
1814 (F) The current implementation of regular expressions uses shorts as
1815 address offsets within a string. Unfortunately this means that if
1816 the regular expression compiles to longer than 32767, it'll blow up.
1817 Usually when you want a regular expression this big, there is a better
1818 way to do it with multiple statements. See L<perlre>.
1820 =item Reversed %s= operator
1822 (W) You wrote your assignment operator backwards. The = must always
1823 comes last, to avoid ambiguity with subsequent unary operators.
1825 =item Runaway format
1827 (F) Your format contained the ~~ repeat-until-blank sequence, but it
1828 produced 200 lines at once, and the 200th line looked exactly like the
1829 199th line. Apparently you didn't arrange for the arguments to exhaust
1830 themselves, either by using ^ instead of @ (for scalar variables), or by
1831 shifting or popping (for array variables). See L<perlform>.
1833 =item Scalar value @%s[%s] better written as $%s[%s]
1835 (W) You've used an array slice (indicated by @) to select a single element of
1836 an array. Generally it's better to ask for a scalar value (indicated by $).
1837 The difference is that C<$foo[&bar]> always behaves like a scalar, both when
1838 assigning to it and when evaluating its argument, while C<@foo[&bar]> behaves
1839 like a list when you assign to it, and provides a list context to its
1840 subscript, which can do weird things if you're expecting only one subscript.
1842 On the other hand, if you were actually hoping to treat the array
1843 element as a list, you need to look into how references work, because
1844 Perl will not magically convert between scalars and lists for you. See
1847 =item Scalar value @%s{%s} better written as $%s{%s}
1849 (W) You've used a hash slice (indicated by @) to select a single element of
1850 a hash. Generally it's better to ask for a scalar value (indicated by $).
1851 The difference is that C<$foo{&bar}> always behaves like a scalar, both when
1852 assigning to it and when evaluating its argument, while C<@foo{&bar}> behaves
1853 like a list when you assign to it, and provides a list context to its
1854 subscript, which can do weird things if you're expecting only one subscript.
1856 On the other hand, if you were actually hoping to treat the hash
1857 element as a list, you need to look into how references work, because
1858 Perl will not magically convert between scalars and lists for you. See
1861 =item Script is not setuid/setgid in suidperl
1863 (F) Oddly, the suidperl program was invoked on a script with its setuid
1864 or setgid bit not set. This doesn't make much sense.
1866 =item Search pattern not terminated
1868 (F) The lexer couldn't find the final delimiter of a // or m{}
1869 construct. Remember that bracketing delimiters count nesting level.
1871 =item seek() on unopened file
1873 (W) You tried to use the seek() function on a filehandle that was either
1874 never opened or has been closed since.
1876 =item select not implemented
1878 (F) This machine doesn't implement the select() system call.
1880 =item sem%s not implemented
1882 (F) You don't have System V semaphore IPC on your system.
1884 =item semi-panic: attempt to dup freed string
1886 (S) The internal newSVsv() routine was called to duplicate a scalar
1887 that had previously been marked as free.
1889 =item Semicolon seems to be missing
1891 (W) A nearby syntax error was probably caused by a missing semicolon,
1892 or possibly some other missing operator, such as a comma.
1894 =item Send on closed socket
1896 (W) The filehandle you're sending to got itself closed sometime before now.
1897 Check your logic flow.
1899 =item Sequence (?#... not terminated
1901 (F) A regular expression comment must be terminated by a closing
1902 parenthesis. Embedded parentheses aren't allowed. See L<perlre>.
1904 =item Sequence (?%s...) not implemented
1906 (F) A proposed regular expression extension has the character reserved
1907 but has not yet been written. See L<perlre>.
1909 =item Sequence (?%s...) not recognized
1911 (F) You used a regular expression extension that doesn't make sense.
1916 Also known as "500 Server error". This is a CGI error, not a Perl
1917 error. You need to make sure your script is executable, is accessible
1918 by the user CGI is running the script under (which is probably not
1919 the user account you tested it under), does not rely on any environment
1920 variables (like PATH) from the user it isn't running under, and isn't
1921 in a location where the CGI server can't find it, basically, more or less.
1923 =item setegid() not implemented
1925 (F) You tried to assign to C<$)>, and your operating system doesn't support
1926 the setegid() system call (or equivalent), or at least Configure didn't
1929 =item seteuid() not implemented
1931 (F) You tried to assign to C<$E<gt>>, and your operating system doesn't support
1932 the seteuid() system call (or equivalent), or at least Configure didn't
1935 =item setrgid() not implemented
1937 (F) You tried to assign to C<$(>, and your operating system doesn't support
1938 the setrgid() system call (or equivalent), or at least Configure didn't
1941 =item setruid() not implemented
1943 (F) You tried to assign to C<$<lt>>, and your operating system doesn't support
1944 the setruid() system call (or equivalent), or at least Configure didn't
1947 =item Setuid/gid script is writable by world
1949 (F) The setuid emulator won't run a script that is writable by the world,
1950 because the world might have written on it already.
1952 =item shm%s not implemented
1954 (F) You don't have System V shared memory IPC on your system.
1956 =item shutdown() on closed fd
1958 (W) You tried to do a shutdown on a closed socket. Seems a bit superfluous.
1960 =item SIG%s handler "%s" not defined.
1962 (W) The signal handler named in %SIG doesn't, in fact, exist. Perhaps you
1963 put it into the wrong package?
1965 =item sort is now a reserved word
1967 (F) An ancient error message that almost nobody ever runs into anymore.
1968 But before sort was a keyword, people sometimes used it as a filehandle.
1970 =item Sort subroutine didn't return a numeric value
1972 (F) A sort comparison routine must return a number. You probably blew
1973 it by not using C<E<lt>=E<gt>> or C<cmp>, or by not using them correctly.
1974 See L<perlfunc/sort>.
1976 =item Sort subroutine didn't return single value
1978 (F) A sort comparison subroutine may not return a list value with more
1979 or less than one element. See L<perlfunc/sort>.
1983 (P) The split was looping infinitely. (Obviously, a split shouldn't iterate
1984 more times than there are characters of input, which is what happened.)
1985 See L<perlfunc/split>.
1987 =item Stat on unopened file E<lt>%sE<gt>
1989 (W) You tried to use the stat() function (or an equivalent file test)
1990 on a filehandle that was either never opened or has been closed since.
1992 =item Statement unlikely to be reached
1994 (W) You did an exec() with some statement after it other than a die().
1995 This is almost always an error, because exec() never returns unless
1996 there was a failure. You probably wanted to use system() instead,
1997 which does return. To suppress this warning, put the exec() in a block
2000 =item Subroutine %s redefined
2002 (W) You redefined a subroutine. To suppress this warning, say
2006 eval "sub name { ... }";
2009 =item Substitution loop
2011 (P) The substitution was looping infinitely. (Obviously, a
2012 substitution shouldn't iterate more times than there are characters of
2013 input, which is what happened.) See the discussion of substitution in
2014 L<perlop/"Quote and Quote-like Operators">.
2016 =item Substitution pattern not terminated
2018 (F) The lexer couldn't find the interior delimiter of a s/// or s{}{}
2019 construct. Remember that bracketing delimiters count nesting level.
2021 =item Substitution replacement not terminated
2023 (F) The lexer couldn't find the final delimiter of a s/// or s{}{}
2024 construct. Remember that bracketing delimiters count nesting level.
2026 =item substr outside of string
2028 (W) You tried to reference a substr() that pointed outside of a string.
2029 That is, the absolute value of the offset was larger than the length of
2030 the string. See L<perlfunc/substr>.
2032 =item suidperl is no longer needed since...
2034 (F) Your Perl was compiled with B<-D>SETUID_SCRIPTS_ARE_SECURE_NOW, but a
2035 version of the setuid emulator somehow got run anyway.
2039 (F) Probably means you had a syntax error. Common reasons include:
2041 A keyword is misspelled.
2042 A semicolon is missing.
2044 An opening or closing parenthesis is missing.
2045 An opening or closing brace is missing.
2046 A closing quote is missing.
2048 Often there will be another error message associated with the syntax
2049 error giving more information. (Sometimes it helps to turn on B<-w>.)
2050 The error message itself often tells you where it was in the line when
2051 it decided to give up. Sometimes the actual error is several tokens
2052 before this, because Perl is good at understanding random input.
2053 Occasionally the line number may be misleading, and once in a blue moon
2054 the only way to figure out what's triggering the error is to call
2055 C<perl -c> repeatedly, chopping away half the program each time to see
2056 if the error went away. Sort of the cybernetic version of S<20 questions>.
2058 =item syntax error at line %d: `%s' unexpected
2060 (A) You've accidentally run your script through the Bourne shell
2061 instead of Perl. Check the E<lt>#!E<gt> line, or manually feed your script
2064 =item System V IPC is not implemented on this machine
2066 (F) You tried to do something with a function beginning with "sem", "shm",
2067 or "msg". See L<perlfunc/semctl>, for example.
2069 =item Syswrite on closed filehandle
2071 (W) The filehandle you're writing to got itself closed sometime before now.
2072 Check your logic flow.
2074 =item tell() on unopened file
2076 (W) You tried to use the tell() function on a filehandle that was either
2077 never opened or has been closed since.
2079 =item Test on unopened file E<lt>%sE<gt>
2081 (W) You tried to invoke a file test operator on a filehandle that isn't
2082 open. Check your logic. See also L<perlfunc/-X>.
2084 =item That use of $[ is unsupported
2086 (F) Assignment to C<$[> is now strictly circumscribed, and interpreted as
2087 a compiler directive. You may say only one of
2096 This is to prevent the problem of one module changing the array base
2097 out from under another module inadvertently. See L<perlvar/$[>.
2099 =item The %s function is unimplemented
2101 The function indicated isn't implemented on this architecture, according
2102 to the probings of Configure.
2104 =item The crypt() function is unimplemented due to excessive paranoia.
2106 (F) Configure couldn't find the crypt() function on your machine,
2107 probably because your vendor didn't supply it, probably because they
2108 think the U.S. Government thinks it's a secret, or at least that they
2109 will continue to pretend that it is. And if you quote me on that, I
2112 =item The stat preceding C<-l _> wasn't an lstat
2114 (F) It makes no sense to test the current stat buffer for symbolic linkhood
2115 if the last stat that wrote to the stat buffer already went past
2116 the symlink to get to the real file. Use an actual filename instead.
2118 =item times not implemented
2120 (F) Your version of the C library apparently doesn't do times(). I suspect
2121 you're not running on Unix.
2123 =item Too few args to syscall
2125 (F) There has to be at least one argument to syscall() to specify the
2126 system call to call, silly dilly.
2132 (A) You've accidentally run your script through B<csh> instead
2133 of Perl. Check the E<lt>#!E<gt> line, or manually feed your script
2136 =item Too many args to syscall
2138 (F) Perl supports a maximum of only 14 args to syscall().
2140 =item Too many arguments for %s
2142 (F) The function requires fewer arguments than you specified.
2144 =item trailing \ in regexp
2146 (F) The regular expression ends with an unbackslashed backslash. Backslash
2149 =item Translation pattern not terminated
2151 (F) The lexer couldn't find the interior delimiter of a tr/// or tr[][]
2154 =item Translation replacement not terminated
2156 (F) The lexer couldn't find the final delimiter of a tr/// or tr[][]
2159 =item truncate not implemented
2161 (F) Your machine doesn't implement a file truncation mechanism that
2162 Configure knows about.
2164 =item Type of arg %d to %s must be %s (not %s)
2166 (F) This function requires the argument in that position to be of a
2167 certain type. Arrays must be @NAME or C<@{EXPR}>. Hashes must be
2168 %NAME or C<%{EXPR}>. No implicit dereferencing is allowed--use the
2169 {EXPR} forms as an explicit dereference. See L<perlref>.
2171 =item umask: argument is missing initial 0
2173 (W) A umask of 222 is incorrect. It should be 0222, because octal literals
2174 always start with 0 in Perl, as in C.
2176 =item Unable to create sub named "%s"
2178 (F) You attempted to create or access a subroutine with an illegal name.
2180 =item Unbalanced context: %d more PUSHes than POPs
2182 (W) The exit code detected an internal inconsistency in how many execution
2183 contexts were entered and left.
2185 =item Unbalanced saves: %d more saves than restores
2187 (W) The exit code detected an internal inconsistency in how many
2188 values were temporarily localized.
2190 =item Unbalanced scopes: %d more ENTERs than LEAVEs
2192 (W) The exit code detected an internal inconsistency in how many blocks
2193 were entered and left.
2195 =item Unbalanced tmps: %d more allocs than frees
2197 (W) The exit code detected an internal inconsistency in how many mortal
2198 scalars were allocated and freed.
2200 =item Undefined format "%s" called
2202 (F) The format indicated doesn't seem to exist. Perhaps it's really in
2203 another package? See L<perlform>.
2205 =item Undefined sort subroutine "%s" called
2207 (F) The sort comparison routine specified doesn't seem to exist. Perhaps
2208 it's in a different package? See L<perlfunc/sort>.
2210 =item Undefined subroutine &%s called
2212 (F) The subroutine indicated hasn't been defined, or if it was, it
2213 has since been undefined.
2215 =item Undefined subroutine called
2217 (F) The anonymous subroutine you're trying to call hasn't been defined,
2218 or if it was, it has since been undefined.
2220 =item Undefined subroutine in sort
2222 (F) The sort comparison routine specified is declared but doesn't seem to
2223 have been defined yet. See L<perlfunc/sort>.
2225 =item Undefined top format "%s" called
2227 (F) The format indicated doesn't seem to exist. Perhaps it's really in
2228 another package? See L<perlform>.
2230 =item unexec of %s into %s failed!
2232 (F) The unexec() routine failed for some reason. See your local FSF
2233 representative, who probably put it there in the first place.
2235 =item Unknown BYTEORDER
2237 (F) There are no byte-swapping functions for a machine with this byte order.
2239 =item unmatched () in regexp
2241 (F) Unbackslashed parentheses must always be balanced in regular
2242 expressions. If you're a vi user, the % key is valuable for finding
2243 the matching parenthesis. See L<perlre>.
2245 =item Unmatched right bracket
2247 (F) The lexer counted more closing curly brackets (braces) than opening
2248 ones, so you're probably missing an opening bracket. As a general
2249 rule, you'll find the missing one (so to speak) near the place you were
2252 =item unmatched [] in regexp
2254 (F) The brackets around a character class must match. If you wish to
2255 include a closing bracket in a character class, backslash it or put it first.
2258 =item Unquoted string "%s" may clash with future reserved word
2260 (W) You used a bare word that might someday be claimed as a reserved word.
2261 It's best to put such a word in quotes, or capitalize it somehow, or insert
2262 an underbar into it. You might also declare it as a subroutine.
2264 =item Unrecognized character \%03o ignored
2266 (S) A garbage character was found in the input, and ignored, in case it's
2267 a weird control character on an EBCDIC machine, or some such.
2269 =item Unrecognized signal name "%s"
2271 (F) You specified a signal name to the kill() function that was not recognized.
2272 Say C<kill -l> in your shell to see the valid signal names on your system.
2274 =item Unrecognized switch: -%s
2276 (F) You specified an illegal option to Perl. Don't do that.
2277 (If you think you didn't do that, check the #! line to see if it's
2278 supplying the bad switch on your behalf.)
2280 =item Unsuccessful %s on filename containing newline
2282 (W) A file operation was attempted on a filename, and that operation
2283 failed, PROBABLY because the filename contained a newline, PROBABLY
2284 because you forgot to chop() or chomp() it off. See L<perlfunc/chop>.
2286 =item Unsupported directory function "%s" called
2288 (F) Your machine doesn't support opendir() and readdir().
2290 =item Unsupported function %s
2292 (F) This machines doesn't implement the indicated function, apparently.
2293 At least, Configure doesn't think so.
2295 =item Unsupported socket function "%s" called
2297 (F) Your machine doesn't support the Berkeley socket mechanism, or at
2298 least that's what Configure thought.
2300 =item Unterminated E<lt>E<gt> operator
2302 (F) The lexer saw a left angle bracket in a place where it was expecting
2303 a term, so it's looking for the corresponding right angle bracket, and not
2304 finding it. Chances are you left some needed parentheses out earlier in
2305 the line, and you really meant a "less than".
2307 =item Use of $# is deprecated
2309 (D) This was an ill-advised attempt to emulate a poorly defined B<awk> feature.
2310 Use an explicit printf() or sprintf() instead.
2312 =item Use of $* is deprecated
2314 (D) This variable magically turned on multi-line pattern matching, both for
2315 you and for any luckless subroutine that you happen to call. You should
2316 use the new C<//m> and C<//s> modifiers now to do that without the dangerous
2317 action-at-a-distance effects of C<$*>.
2319 =item Use of %s in printf format not supported
2321 (F) You attempted to use a feature of printf that is accessible from
2322 only C. This usually means there's a better way to do it in Perl.
2324 =item Use of %s is deprecated
2326 (D) The construct indicated is no longer recommended for use, generally
2327 because there's a better way to do it, and also because the old way has
2330 =item Use of bare E<lt>E<lt> to mean E<lt>E<lt>"" is deprecated
2332 (D) You are now encouraged to use the explicitly quoted form if you
2333 wish to use a blank line as the terminator of the here-document.
2335 =item Use of implicit split to @_ is deprecated
2337 (D) It makes a lot of work for the compiler when you clobber a
2338 subroutine's argument list, so it's better if you assign the results of
2339 a split() explicitly to an array (or list).
2341 =item Use of uninitialized value
2343 (W) An undefined value was used as if it were already defined. It was
2344 interpreted as a "" or a 0, but maybe it was a mistake. To suppress this
2345 warning assign an initial value to your variables.
2347 =item Useless use of %s in void context
2349 (W) You did something without a side effect in a context that does nothing
2350 with the return value, such as a statement that doesn't return a value
2351 from a block, or the left side of a scalar comma operator. Very often
2352 this points not to stupidity on your part, but a failure of Perl to parse
2353 your program the way you thought it would. For example, you'd get this
2354 if you mixed up your C precedence with Python precedence and said
2358 when you meant to say
2360 ($one, $two) = (1, 2);
2362 Another common error is to use ordinary parentheses to construct a list
2363 reference when you should be using square or curly brackets, for
2368 when you should have said
2372 The square brackets explicitly turn a list value into a scalar value,
2373 while parentheses do not. So when a parenthesized list is evaluated in
2374 a scalar context, the comma is treated like C's comma operator, which
2375 throws away the left argument, which is not what you want. See
2376 L<perlref> for more on this.
2378 =item untie attempted while %d inner references still exist
2380 (W) A copy of the object returned from C<tie> (or C<tied>) was still
2381 valid when C<untie> was called.
2383 =item Value of %s construct can be "0"; test with defined()
2385 (W) In a conditional expression, you used <HANDLE>, <*> (glob), or
2386 C<readdir> as a boolean value. Each of these constructs can return a
2387 value of "0"; that would make the conditional expression false, which
2388 is probably not what you intended. When using these constructs in
2389 conditional expressions, test their values with the C<defined> operator.
2391 =item Variable "%s" is not exported
2393 (F) While "use strict" in effect, you referred to a global variable
2394 that you apparently thought was imported from another module, because
2395 something else of the same name (usually a subroutine) is exported
2396 by that module. It usually means you put the wrong funny character
2397 on the front of your variable.
2399 =item Variable syntax.
2401 (A) You've accidentally run your script through B<csh> instead
2402 of Perl. Check the E<lt>#!E<gt> line, or manually feed your script
2405 =item Warning: something's wrong
2407 (W) You passed warn() an empty string (the equivalent of C<warn "">) or
2408 you called it with no args and C<$_> was empty.
2410 =item Warning: unable to close filehandle %s properly.
2412 (S) The implicit close() done by an open() got an error indication on the
2413 close(). This usually indicates your file system ran out of disk space.
2415 =item Warning: Use of "%s" without parentheses is ambiguous
2417 (S) You wrote a unary operator followed by something that looks like a
2418 binary operator that could also have been interpreted as a term or
2419 unary operator. For instance, if you know that the rand function
2420 has a default argument of 1.0, and you write
2424 you may THINK you wrote the same thing as
2428 but in actual fact, you got
2432 So put in parentheses to say what you really mean.
2434 =item Write on closed filehandle
2436 (W) The filehandle you're writing to got itself closed sometime before now.
2437 Check your logic flow.
2439 =item X outside of string
2441 (F) You had a pack template that specified a relative position before
2442 the beginning of the string being unpacked. See L<perlfunc/pack>.
2444 =item x outside of string
2446 (F) You had a pack template that specified a relative position after
2447 the end of the string being unpacked. See L<perlfunc/pack>.
2449 =item Xsub "%s" called in sort
2451 (F) The use of an external subroutine as a sort comparison is not yet supported.
2453 =item Xsub called in sort
2455 (F) The use of an external subroutine as a sort comparison is not yet supported.
2457 =item You can't use C<-l> on a filehandle
2459 (F) A filehandle represents an opened file, and when you opened the file it
2460 already went past any symlink you are presumably trying to look for.
2461 Use a filename instead.
2463 =item YOU HAVEN'T DISABLED SET-ID SCRIPTS IN THE KERNEL YET!
2465 (F) And you probably never will, because you probably don't have the
2466 sources to your kernel, and your vendor probably doesn't give a rip
2467 about what you want. Your best bet is to use the wrapsuid script in
2468 the eg directory to put a setuid C wrapper around your script.
2470 =item You need to quote "%s"
2472 (W) You assigned a bareword as a signal handler name. Unfortunately, you
2473 already have a subroutine of that name declared, which means that Perl 5
2474 will try to call the subroutine when the assignment is executed, which is
2475 probably not what you want. (If it IS what you want, put an & in front.)
2477 =item [gs]etsockopt() on closed fd
2479 (W) You tried to get or set a socket option on a closed socket.
2480 Did you forget to check the return value of your socket() call?
2481 See L<perlfunc/getsockopt>.
2483 =item \1 better written as $1
2485 (W) Outside of patterns, backreferences live on as variables. The use
2486 of backslashes is grandfathered on the right-hand side of a
2487 substitution, but stylistically it's better to use the variable form
2488 because other Perl programmers will expect it, and it works better
2489 if there are more than 9 backreferences.
2491 =item '|' and 'E<lt>' may not both be specified on command line
2493 (F) An error peculiar to VMS. Perl does its own command line redirection, and
2494 found that STDIN was a pipe, and that you also tried to redirect STDIN using
2495 'E<lt>'. Only one STDIN stream to a customer, please.
2497 =item '|' and 'E<gt>' may not both be specified on command line
2499 (F) An error peculiar to VMS. Perl does its own command line redirection, and
2500 thinks you tried to redirect stdout both to a file and into a pipe to another
2501 command. You need to choose one or the other, though nothing's stopping you
2502 from piping into a program or Perl script which 'splits' output into two
2505 open(OUT,">$ARGV[0]") or die "Can't write to $ARGV[0]: $!";
2512 =item Got an error from DosAllocMem:
2514 (P) An error peculiar to OS/2. Most probably you use an obsolete version
2515 of perl, and this should not happen anyway.
2517 =item Malformed PERLLIB_PREFIX
2519 (F) An error peculiar to OS/2. PERLLIB_PREFIX should be of the form
2527 with non-empty prefix1 and prefix2. If C<prefix1> is indeed a prefix of
2528 a builtin library search path, prefix2 is substituted. The error may appear
2529 if components are not found, or are too long. See L<perlos2/"PERLLIB_PREFIX">.
2531 =item PERL_SH_DIR too long
2533 (F) An error peculiar to OS/2. PERL_SH_DIR is the directory to find the
2534 C<sh>-shell in. See L<perlos2/"PERL_SH_DIR">.
2536 =item Process terminated by SIG%s
2538 (W) This is a standard message issued by OS/2 applications, while *nix
2539 applications die in silence. It is considered a feature of the OS/2
2540 port. One can easily disable this by appropriate sighandlers, see
2541 L<perlipc/"Signals">. See L<perlos2/"Process terminated by SIGTERM/SIGINT">.