3 perldiag - various Perl diagnostics
7 These messages are classified as follows (listed in increasing order of
10 (W) A warning (optional).
11 (D) A deprecation (optional).
12 (S) A severe warning (default).
13 (F) A fatal error (trappable).
14 (P) An internal error you should never see (trappable).
15 (X) A very fatal error (nontrappable).
16 (A) An alien error message (not generated by Perl).
18 The majority of messages from the first three classifications above
19 (W, D & S) can be controlled using the C<warnings> pragma.
21 If a message can be controlled by the C<warnings> pragma, its warning
22 category is included with the classification letter in the description
25 Optional warnings are enabled by using the C<warnings> pragma or the B<-w>
26 and B<-W> switches. Warnings may be captured by setting C<$SIG{__WARN__}>
27 to a reference to a routine that will be called on each warning instead
28 of printing it. See L<perlvar>.
30 Default warnings are always enabled unless they are explicitly disabled
31 with the C<warnings> pragma or the B<-X> switch.
33 Trappable errors may be trapped using the eval operator. See
34 L<perlfunc/eval>. In almost all cases, warnings may be selectively
35 disabled or promoted to fatal errors using the C<warnings> pragma.
38 The messages are in alphabetical order, without regard to upper or
39 lower-case. Some of these messages are generic. Spots that vary are
40 denoted with a %s or other printf-style escape. These escapes are
41 ignored by the alphabetical order, as are all characters other than
42 letters. To look up your message, just ignore anything that is not a
47 =item accept() on closed socket %s
49 (W closed) You tried to do an accept on a closed socket. Did you forget
50 to check the return value of your socket() call? See
53 =item Allocation too large: %lx
55 (X) You can't allocate more than 64K on an MS-DOS machine.
57 =item '%c' allowed only after types %s
59 (F) The modifiers '!', '<' and '>' are allowed in pack() or unpack() only
60 after certain types. See L<perlfunc/pack>.
62 =item Ambiguous call resolved as CORE::%s(), qualify as such or use &
64 (W ambiguous) A subroutine you have declared has the same name as a Perl
65 keyword, and you have used the name without qualification for calling
66 one or the other. Perl decided to call the builtin because the
67 subroutine is not imported.
69 To force interpretation as a subroutine call, either put an ampersand
70 before the subroutine name, or qualify the name with its package.
71 Alternatively, you can import the subroutine (or pretend that it's
72 imported with the C<use subs> pragma).
74 To silently interpret it as the Perl operator, use the C<CORE::> prefix
75 on the operator (e.g. C<CORE::log($x)>) or declare the subroutine
76 to be an object method (see L<perlsub/"Subroutine Attributes"> or
79 =item Ambiguous range in transliteration operator
81 (F) You wrote something like C<tr/a-z-0//> which doesn't mean anything at
82 all. To include a C<-> character in a transliteration, put it either
83 first or last. (In the past, C<tr/a-z-0//> was synonymous with
84 C<tr/a-y//>, which was probably not what you would have expected.)
86 =item Ambiguous use of %s resolved as %s
88 (W ambiguous)(S) You said something that may not be interpreted the way
89 you thought. Normally it's pretty easy to disambiguate it by supplying
90 a missing quote, operator, parenthesis pair or declaration.
92 =item '|' and '<' may not both be specified on command line
94 (F) An error peculiar to VMS. Perl does its own command line
95 redirection, and found that STDIN was a pipe, and that you also tried to
96 redirect STDIN using '<'. Only one STDIN stream to a customer, please.
98 =item '|' and '>' may not both be specified on command line
100 (F) An error peculiar to VMS. Perl does its own command line
101 redirection, and thinks you tried to redirect stdout both to a file and
102 into a pipe to another command. You need to choose one or the other,
103 though nothing's stopping you from piping into a program or Perl script
104 which 'splits' output into two streams, such as
106 open(OUT,">$ARGV[0]") or die "Can't write to $ARGV[0]: $!";
113 =item Applying %s to %s will act on scalar(%s)
115 (W misc) The pattern match (C<//>), substitution (C<s///>), and
116 transliteration (C<tr///>) operators work on scalar values. If you apply
117 one of them to an array or a hash, it will convert the array or hash to
118 a scalar value -- the length of an array, or the population info of a
119 hash -- and then work on that scalar value. This is probably not what
120 you meant to do. See L<perlfunc/grep> and L<perlfunc/map> for
123 =item Args must match #! line
125 (F) The setuid emulator requires that the arguments Perl was invoked
126 with match the arguments specified on the #! line. Since some systems
127 impose a one-argument limit on the #! line, try combining switches;
128 for example, turn C<-w -U> into C<-wU>.
130 =item Arg too short for msgsnd
132 (F) msgsnd() requires a string at least as long as sizeof(long).
134 =item %s argument is not a HASH or ARRAY element
136 (F) The argument to exists() must be a hash or array element, such as:
141 =item %s argument is not a HASH or ARRAY element or slice
143 (F) The argument to delete() must be either a hash or array element,
149 or a hash or array slice, such as:
151 @foo[$bar, $baz, $xyzzy]
152 @{$ref->[12]}{"susie", "queue"}
154 =item %s argument is not a subroutine name
156 (F) The argument to exists() for C<exists &sub> must be a subroutine
157 name, and not a subroutine call. C<exists &sub()> will generate this
160 =item Argument "%s" isn't numeric%s
162 (W numeric) The indicated string was fed as an argument to an operator
163 that expected a numeric value instead. If you're fortunate the message
164 will identify which operator was so unfortunate.
166 =item Argument list not closed for PerlIO layer "%s"
168 (W layer) When pushing a layer with arguments onto the Perl I/O system you
169 forgot the ) that closes the argument list. (Layers take care of transforming
170 data between external and internal representations.) Perl stopped parsing
171 the layer list at this point and did not attempt to push this layer.
172 If your program didn't explicitly request the failing operation, it may be
173 the result of the value of the environment variable PERLIO.
175 =item Array @%s missing the @ in argument %d of %s()
177 (D deprecated) Really old Perl let you omit the @ on array names in some
178 spots. This is now heavily deprecated.
180 =item assertion botched: %s
182 (P) The malloc package that comes with Perl had an internal failure.
184 =item Assertion failed: file "%s"
186 (P) A general assertion failed. The file in question must be examined.
188 =item Assignment to both a list and a scalar
190 (F) If you assign to a conditional operator, the 2nd and 3rd arguments
191 must either both be scalars or both be lists. Otherwise Perl won't
192 know which context to supply to the right side.
194 =item A thread exited while %d threads were running
196 (W threads)(S) When using threaded Perl, a thread (not necessarily the main
197 thread) exited while there were still other threads running.
198 Usually it's a good idea to first collect the return values of the
199 created threads by joining them, and only then exit from the main
200 thread. See L<threads>.
202 =item Attempt to access disallowed key '%s' in a restricted hash
204 (F) The failing code has attempted to get or set a key which is not in
205 the current set of allowed keys of a restricted hash.
207 =item Attempt to bless into a reference
209 (F) The CLASSNAME argument to the bless() operator is expected to be
210 the name of the package to bless the resulting object into. You've
211 supplied instead a reference to something: perhaps you wrote
217 bless $self, ref($proto) || $proto;
219 If you actually want to bless into the stringified version
220 of the reference supplied, you need to stringify it yourself, for
223 bless $self, "$proto";
225 =item Attempt to delete disallowed key '%s' from a restricted hash
227 (F) The failing code attempted to delete from a restricted hash a key
228 which is not in its key set.
230 =item Attempt to delete readonly key '%s' from a restricted hash
232 (F) The failing code attempted to delete a key whose value has been
233 declared readonly from a restricted hash.
235 =item Attempt to free non-arena SV: 0x%lx
237 (P internal) All SV objects are supposed to be allocated from arenas
238 that will be garbage collected on exit. An SV was discovered to be
239 outside any of those arenas.
241 =item Attempt to free nonexistent shared string
243 (P internal) Perl maintains a reference counted internal table of
244 strings to optimize the storage and access of hash keys and other
245 strings. This indicates someone tried to decrement the reference count
246 of a string that can no longer be found in the table.
248 =item Attempt to free temp prematurely
250 (W debugging) Mortalized values are supposed to be freed by the
251 free_tmps() routine. This indicates that something else is freeing the
252 SV before the free_tmps() routine gets a chance, which means that the
253 free_tmps() routine will be freeing an unreferenced scalar when it does
256 =item Attempt to free unreferenced glob pointers
258 (P internal) The reference counts got screwed up on symbol aliases.
260 =item Attempt to free unreferenced scalar
262 (W internal) Perl went to decrement the reference count of a scalar to
263 see if it would go to 0, and discovered that it had already gone to 0
264 earlier, and should have been freed, and in fact, probably was freed.
265 This could indicate that SvREFCNT_dec() was called too many times, or
266 that SvREFCNT_inc() was called too few times, or that the SV was
267 mortalized when it shouldn't have been, or that memory has been
270 =item Attempt to join self
272 (F) You tried to join a thread from within itself, which is an
273 impossible task. You may be joining the wrong thread, or you may need
274 to move the join() to some other thread.
276 =item Attempt to pack pointer to temporary value
278 (W pack) You tried to pass a temporary value (like the result of a
279 function, or a computed expression) to the "p" pack() template. This
280 means the result contains a pointer to a location that could become
281 invalid anytime, even before the end of the current statement. Use
282 literals or global values as arguments to the "p" pack() template to
285 =item Attempt to set length of freed array
287 (W) You tried to set the length of an array which has been freed. You
288 can do this by storing a reference to the scalar representing the last index
289 of an array and later assigning through that reference. For example
291 $r = do {my @a; \$#a};
294 =item Attempt to use reference as lvalue in substr
296 (W substr) You supplied a reference as the first argument to substr()
297 used as an lvalue, which is pretty strange. Perhaps you forgot to
298 dereference it first. See L<perlfunc/substr>.
300 =item Bad arg length for %s, is %d, should be %s
302 (F) You passed a buffer of the wrong size to one of msgctl(), semctl()
303 or shmctl(). In C parlance, the correct sizes are, respectively,
304 S<sizeof(struct msqid_ds *)>, S<sizeof(struct semid_ds *)>, and
305 S<sizeof(struct shmid_ds *)>.
307 =item Bad evalled substitution pattern
309 (F) You've used the C</e> switch to evaluate the replacement for a
310 substitution, but perl found a syntax error in the code to evaluate,
311 most likely an unexpected right brace '}'.
313 =item Bad filehandle: %s
315 (F) A symbol was passed to something wanting a filehandle, but the
316 symbol has no filehandle associated with it. Perhaps you didn't do an
317 open(), or did it in another package.
319 =item Bad free() ignored
321 (S malloc) An internal routine called free() on something that had never
322 been malloc()ed in the first place. Mandatory, but can be disabled by
323 setting environment variable C<PERL_BADFREE> to 0.
325 This message can be seen quite often with DB_File on systems with "hard"
326 dynamic linking, like C<AIX> and C<OS/2>. It is a bug of C<Berkeley DB>
327 which is left unnoticed if C<DB> uses I<forgiving> system malloc().
331 (P) One of the internal hash routines was passed a null HV pointer.
333 =item Badly placed ()'s
335 (A) You've accidentally run your script through B<csh> instead
336 of Perl. Check the #! line, or manually feed your script into
339 =item Bad name after %s::
341 (F) You started to name a symbol by using a package prefix, and then
342 didn't finish the symbol. In particular, you can't interpolate outside
351 $sym = "mypack::$var";
353 =item Bad realloc() ignored
355 (S malloc) An internal routine called realloc() on something that had
356 never been malloc()ed in the first place. Mandatory, but can be disabled
357 by setting environment variable C<PERL_BADFREE> to 1.
359 =item Bad symbol for array
361 (P) An internal request asked to add an array entry to something that
362 wasn't a symbol table entry.
364 =item Bad symbol for dirhandle
366 (P) An internal request asked to add a dirhandle entry to something
367 that wasn't a symbol table entry.
370 =item Bad symbol for filehandle
372 (P) An internal request asked to add a filehandle entry to something
373 that wasn't a symbol table entry.
375 =item Bad symbol for hash
377 (P) An internal request asked to add a hash entry to something that
378 wasn't a symbol table entry.
380 =item Bareword found in conditional
382 (W bareword) The compiler found a bareword where it expected a
383 conditional, which often indicates that an || or && was parsed as part
384 of the last argument of the previous construct, for example:
388 It may also indicate a misspelled constant that has been interpreted as
391 use constant TYPO => 1;
392 if (TYOP) { print "foo" }
394 The C<strict> pragma is useful in avoiding such errors.
396 =item Bareword "%s" not allowed while "strict subs" in use
398 (F) With "strict subs" in use, a bareword is only allowed as a
399 subroutine identifier, in curly brackets or to the left of the "=>"
400 symbol. Perhaps you need to predeclare a subroutine?
402 =item Bareword "%s" refers to nonexistent package
404 (W bareword) You used a qualified bareword of the form C<Foo::>, but the
405 compiler saw no other uses of that namespace before that point. Perhaps
406 you need to predeclare a package?
408 =item BEGIN failed--compilation aborted
410 (F) An untrapped exception was raised while executing a BEGIN
411 subroutine. Compilation stops immediately and the interpreter is
414 =item BEGIN not safe after errors--compilation aborted
416 (F) Perl found a C<BEGIN {}> subroutine (or a C<use> directive, which
417 implies a C<BEGIN {}>) after one or more compilation errors had already
418 occurred. Since the intended environment for the C<BEGIN {}> could not
419 be guaranteed (due to the errors), and since subsequent code likely
420 depends on its correct operation, Perl just gave up.
422 =item \1 better written as $1
424 (W syntax) Outside of patterns, backreferences live on as variables.
425 The use of backslashes is grandfathered on the right-hand side of a
426 substitution, but stylistically it's better to use the variable form
427 because other Perl programmers will expect it, and it works better if
428 there are more than 9 backreferences.
430 =item Binary number > 0b11111111111111111111111111111111 non-portable
432 (W portable) The binary number you specified is larger than 2**32-1
433 (4294967295) and therefore non-portable between systems. See
434 L<perlport> for more on portability concerns.
436 =item bind() on closed socket %s
438 (W closed) You tried to do a bind on a closed socket. Did you forget to
439 check the return value of your socket() call? See L<perlfunc/bind>.
441 =item binmode() on closed filehandle %s
443 (W unopened) You tried binmode() on a filehandle that was never opened.
444 Check you control flow and number of arguments.
446 =item Bit vector size > 32 non-portable
448 (W portable) Using bit vector sizes larger than 32 is non-portable.
450 =item Bizarre copy of %s in %s
452 (P) Perl detected an attempt to copy an internal value that is not
455 =item Buffer overflow in prime_env_iter: %s
457 (W internal) A warning peculiar to VMS. While Perl was preparing to
458 iterate over %ENV, it encountered a logical name or symbol definition
459 which was too long, so it was truncated to the string shown.
461 =item Callback called exit
463 (F) A subroutine invoked from an external package via call_sv()
464 exited by calling exit.
466 =item %s() called too early to check prototype
468 (W prototype) You've called a function that has a prototype before the
469 parser saw a definition or declaration for it, and Perl could not check
470 that the call conforms to the prototype. You need to either add an
471 early prototype declaration for the subroutine in question, or move the
472 subroutine definition ahead of the call to get proper prototype
473 checking. Alternatively, if you are certain that you're calling the
474 function correctly, you may put an ampersand before the name to avoid
475 the warning. See L<perlsub>.
477 =item Cannot compress integer in pack
479 (F) An argument to pack("w",...) was too large to compress. The BER
480 compressed integer format can only be used with positive integers, and you
481 attempted to compress Infinity or a very large number (> 1e308).
482 See L<perlfunc/pack>.
484 =item Cannot compress negative numbers in pack
486 (F) An argument to pack("w",...) was negative. The BER compressed integer
487 format can only be used with positive integers. See L<perlfunc/pack>.
489 =item Cannot convert a reference to %s to typeglob
491 (F) You manipulated Perl's symbol table directly, stored a reference in it,
492 then tried to access that symbol via conventional Perl syntax. The access
493 triggers Perl to autovivify that typeglob, but it there is no legal conversion
494 from that type of reference to a typeglob.
496 =item Can only compress unsigned integers in pack
498 (F) An argument to pack("w",...) was not an integer. The BER compressed
499 integer format can only be used with positive integers, and you attempted
500 to compress something else. See L<perlfunc/pack>.
502 =item Can't bless non-reference value
504 (F) Only hard references may be blessed. This is how Perl "enforces"
505 encapsulation of objects. See L<perlobj>.
507 =item Can't "break" in a loop topicalizer
509 (F) You called C<break>, but you're in a C<foreach> block rather than
510 a C<given> block. You probably meant to use C<next> or C<last>.
512 =item Can't "break" outside a given block
514 (F) You called C<break>, but you're not inside a C<given> block.
516 =item Can't call method "%s" in empty package "%s"
518 (F) You called a method correctly, and it correctly indicated a package
519 functioning as a class, but that package doesn't have ANYTHING defined
520 in it, let alone methods. See L<perlobj>.
522 =item Can't call method "%s" on an undefined value
524 (F) You used the syntax of a method call, but the slot filled by the
525 object reference or package name contains an undefined value. Something
526 like this will reproduce the error:
529 process $BADREF 1,2,3;
530 $BADREF->process(1,2,3);
532 =item Can't call method "%s" on unblessed reference
534 (F) A method call must know in what package it's supposed to run. It
535 ordinarily finds this out from the object reference you supply, but you
536 didn't supply an object reference in this case. A reference isn't an
537 object reference until it has been blessed. See L<perlobj>.
539 =item Can't call method "%s" without a package or object reference
541 (F) You used the syntax of a method call, but the slot filled by the
542 object reference or package name contains an expression that returns a
543 defined value which is neither an object reference nor a package name.
544 Something like this will reproduce the error:
547 process $BADREF 1,2,3;
548 $BADREF->process(1,2,3);
550 =item Can't chdir to %s
552 (F) You called C<perl -x/foo/bar>, but C</foo/bar> is not a directory
553 that you can chdir to, possibly because it doesn't exist.
555 =item Can't check filesystem of script "%s" for nosuid
557 (P) For some reason you can't check the filesystem of the script for
560 =item Can't coerce array into hash
562 (F) You used an array where a hash was expected, but the array has no
563 information on how to map from keys to array indices. You can do that
564 only with arrays that have a hash reference at index 0.
566 =item Can't coerce %s to integer in %s
568 (F) Certain types of SVs, in particular real symbol table entries
569 (typeglobs), can't be forced to stop being what they are. So you can't
579 but then $foo no longer contains a glob.
581 =item Can't coerce %s to number in %s
583 (F) Certain types of SVs, in particular real symbol table entries
584 (typeglobs), can't be forced to stop being what they are.
586 =item Can't coerce %s to string in %s
588 (F) Certain types of SVs, in particular real symbol table entries
589 (typeglobs), can't be forced to stop being what they are.
591 =item Can't "continue" outside a when block
593 (F) You called C<continue>, but you're not inside a C<when>
596 =item Can't create pipe mailbox
598 (P) An error peculiar to VMS. The process is suffering from exhausted
599 quotas or other plumbing problems.
601 =item Can't declare class for non-scalar %s in "%s"
603 (F) Currently, only scalar variables can be declared with a specific
604 class qualifier in a "my" or "our" declaration. The semantics may be
605 extended for other types of variables in future.
607 =item Can't declare %s in "%s"
609 (F) Only scalar, array, and hash variables may be declared as "my" or
610 "our" variables. They must have ordinary identifiers as names.
612 =item Can't do inplace edit: %s is not a regular file
614 (S inplace) You tried to use the B<-i> switch on a special file, such as
615 a file in /dev, or a FIFO. The file was ignored.
617 =item Can't do inplace edit on %s: %s
619 (S inplace) The creation of the new file failed for the indicated
622 =item Can't do inplace edit without backup
624 (F) You're on a system such as MS-DOS that gets confused if you try
625 reading from a deleted (but still opened) file. You have to say
626 C<-i.bak>, or some such.
628 =item Can't do inplace edit: %s would not be unique
630 (S inplace) Your filesystem does not support filenames longer than 14
631 characters and Perl was unable to create a unique filename during
632 inplace editing with the B<-i> switch. The file was ignored.
634 =item Can't do {n,m} with n > m in regex; marked by <-- HERE in m/%s/
636 (F) Minima must be less than or equal to maxima. If you really want your
637 regexp to match something 0 times, just put {0}. The <-- HERE shows in the
638 regular expression about where the problem was discovered. See L<perlre>.
640 =item Can't do setegid!
642 (P) The setegid() call failed for some reason in the setuid emulator of
645 =item Can't do seteuid!
647 (P) The setuid emulator of suidperl failed for some reason.
649 =item Can't do setuid
651 (F) This typically means that ordinary perl tried to exec suidperl to do
652 setuid emulation, but couldn't exec it. It looks for a name of the form
653 sperl5.000 in the same directory that the perl executable resides under
654 the name perl5.000, typically /usr/local/bin on Unix machines. If the
655 file is there, check the execute permissions. If it isn't, ask your
656 sysadmin why he and/or she removed it.
658 =item Can't do waitpid with flags
660 (F) This machine doesn't have either waitpid() or wait4(), so only
661 waitpid() without flags is emulated.
663 =item Can't emulate -%s on #! line
665 (F) The #! line specifies a switch that doesn't make sense at this
666 point. For example, it'd be kind of silly to put a B<-x> on the #!
669 =item Can't %s %s-endian %ss on this platform
671 (F) Your platform's byte-order is neither big-endian nor little-endian,
672 or it has a very strange pointer size. Packing and unpacking big- or
673 little-endian floating point values and pointers may not be possible.
674 See L<perlfunc/pack>.
676 =item Can't exec "%s": %s
678 (W exec) A system(), exec(), or piped open call could not execute the
679 named program for the indicated reason. Typical reasons include: the
680 permissions were wrong on the file, the file wasn't found in
681 C<$ENV{PATH}>, the executable in question was compiled for another
682 architecture, or the #! line in a script points to an interpreter that
683 can't be run for similar reasons. (Or maybe your system doesn't support
688 (F) Perl was trying to execute the indicated program for you because
689 that's what the #! line said. If that's not what you wanted, you may
690 need to mention "perl" on the #! line somewhere.
692 =item Can't execute %s
694 (F) You used the B<-S> switch, but the copies of the script to execute
695 found in the PATH did not have correct permissions.
697 =item Can't find an opnumber for "%s"
699 (F) A string of a form C<CORE::word> was given to prototype(), but there
700 is no builtin with the name C<word>.
702 =item Can't find %s character property "%s"
704 (F) You used C<\p{}> or C<\P{}> but the character property by that name
705 could not be found. Maybe you misspelled the name of the property
706 (remember that the names of character properties consist only of
707 alphanumeric characters), or maybe you forgot the C<Is> or C<In> prefix?
709 =item Can't find label %s
711 (F) You said to goto a label that isn't mentioned anywhere that it's
712 possible for us to go to. See L<perlfunc/goto>.
714 =item Can't find %s on PATH
716 (F) You used the B<-S> switch, but the script to execute could not be
719 =item Can't find %s on PATH, '.' not in PATH
721 (F) You used the B<-S> switch, but the script to execute could not be
722 found in the PATH, or at least not with the correct permissions. The
723 script exists in the current directory, but PATH prohibits running it.
725 =item Can't find string terminator %s anywhere before EOF
727 (F) Perl strings can stretch over multiple lines. This message means
728 that the closing delimiter was omitted. Because bracketed quotes count
729 nesting levels, the following is missing its final parenthesis:
731 print q(The character '(' starts a side comment.);
733 If you're getting this error from a here-document, you may have included
734 unseen whitespace before or after your closing tag. A good programmer's
735 editor will have a way to help you find these characters.
737 =item Can't find Unicode property definition "%s"
739 (F) You may have tried to use C<\p> which means a Unicode property (for
740 example C<\p{Lu}> is all uppercase letters). If you did mean to use a
741 Unicode property, see L<perlunicode> for the list of known properties.
742 If you didn't mean to use a Unicode property, escape the C<\p>, either
743 by C<\\p> (just the C<\p>) or by C<\Q\p> (the rest of the string, until
748 (F) A fatal error occurred while trying to fork while opening a
751 =item Can't get filespec - stale stat buffer?
753 (S) A warning peculiar to VMS. This arises because of the difference
754 between access checks under VMS and under the Unix model Perl assumes.
755 Under VMS, access checks are done by filename, rather than by bits in
756 the stat buffer, so that ACLs and other protections can be taken into
757 account. Unfortunately, Perl assumes that the stat buffer contains all
758 the necessary information, and passes it, instead of the filespec, to
759 the access checking routine. It will try to retrieve the filespec using
760 the device name and FID present in the stat buffer, but this works only
761 if you haven't made a subsequent call to the CRTL stat() routine,
762 because the device name is overwritten with each call. If this warning
763 appears, the name lookup failed, and the access checking routine gave up
764 and returned FALSE, just to be conservative. (Note: The access checking
765 routine knows about the Perl C<stat> operator and file tests, so you
766 shouldn't ever see this warning in response to a Perl command; it arises
767 only if some internal code takes stat buffers lightly.)
769 =item Can't get pipe mailbox device name
771 (P) An error peculiar to VMS. After creating a mailbox to act as a
772 pipe, Perl can't retrieve its name for later use.
774 =item Can't get SYSGEN parameter value for MAXBUF
776 (P) An error peculiar to VMS. Perl asked $GETSYI how big you want your
777 mailbox buffers to be, and didn't get an answer.
779 =item Can't "goto" into the middle of a foreach loop
781 (F) A "goto" statement was executed to jump into the middle of a foreach
782 loop. You can't get there from here. See L<perlfunc/goto>.
784 =item Can't "goto" out of a pseudo block
786 (F) A "goto" statement was executed to jump out of what might look like
787 a block, except that it isn't a proper block. This usually occurs if
788 you tried to jump out of a sort() block or subroutine, which is a no-no.
789 See L<perlfunc/goto>.
791 =item Can't goto subroutine from a sort sub (or similar callback)
793 (F) The "goto subroutine" call can't be used to jump out of the
794 comparison sub for a sort(), or from a similar callback (such
795 as the reduce() function in List::Util).
797 =item Can't goto subroutine from an eval-%s
799 (F) The "goto subroutine" call can't be used to jump out of an eval
802 =item Can't goto subroutine outside a subroutine
804 (F) The deeply magical "goto subroutine" call can only replace one
805 subroutine call for another. It can't manufacture one out of whole
806 cloth. In general you should be calling it out of only an AUTOLOAD
807 routine anyway. See L<perlfunc/goto>.
809 =item Can't ignore signal CHLD, forcing to default
811 (W signal) Perl has detected that it is being run with the SIGCHLD
812 signal (sometimes known as SIGCLD) disabled. Since disabling this
813 signal will interfere with proper determination of exit status of child
814 processes, Perl has reset the signal to its default value. This
815 situation typically indicates that the parent program under which Perl
816 may be running (e.g. cron) is being very careless.
818 =item Can't "last" outside a loop block
820 (F) A "last" statement was executed to break out of the current block,
821 except that there's this itty bitty problem called there isn't a current
822 block. Note that an "if" or "else" block doesn't count as a "loopish"
823 block, as doesn't a block given to sort(), map() or grep(). You can
824 usually double the curlies to get the same effect though, because the
825 inner curlies will be considered a block that loops once. See
828 =item Can't load '%s' for module %s
830 (F) The module you tried to load failed to load a dynamic extension. This
831 may either mean that you upgraded your version of perl to one that is
832 incompatible with your old dynamic extensions (which is known to happen
833 between major versions of perl), or (more likely) that your dynamic
834 extension was built against an older version of the library that is
835 installed on your system. You may need to rebuild your old dynamic
838 =item Can't localize lexical variable %s
840 (F) You used local on a variable name that was previously declared as a
841 lexical variable using "my". This is not allowed. If you want to
842 localize a package variable of the same name, qualify it with the
845 =item Can't localize through a reference
847 (F) You said something like C<local $$ref>, which Perl can't currently
848 handle, because when it goes to restore the old value of whatever $ref
849 pointed to after the scope of the local() is finished, it can't be sure
850 that $ref will still be a reference.
852 =item Can't locate %s
854 (F) You said to C<do> (or C<require>, or C<use>) a file that couldn't be
855 found. Perl looks for the file in all the locations mentioned in @INC,
856 unless the file name included the full path to the file. Perhaps you
857 need to set the PERL5LIB or PERL5OPT environment variable to say where
858 the extra library is, or maybe the script needs to add the library name
859 to @INC. Or maybe you just misspelled the name of the file. See
860 L<perlfunc/require> and L<lib>.
862 =item Can't locate auto/%s.al in @INC
864 (F) A function (or method) was called in a package which allows
865 autoload, but there is no function to autoload. Most probable causes
866 are a misprint in a function/method name or a failure to C<AutoSplit>
867 the file, say, by doing C<make install>.
869 =item Can't locate loadable object for module %s in @INC
871 (F) The module you loaded is trying to load an external library, like
872 for example, C<foo.so> or C<bar.dll>, but the L<DynaLoader> module was
873 unable to locate this library. See L<DynaLoader>.
875 =item Can't locate object method "%s" via package "%s"
877 (F) You called a method correctly, and it correctly indicated a package
878 functioning as a class, but that package doesn't define that particular
879 method, nor does any of its base classes. See L<perlobj>.
881 =item Can't locate package %s for @%s::ISA
883 (W syntax) The @ISA array contained the name of another package that
884 doesn't seem to exist.
886 =item Can't locate PerlIO%s
888 (F) You tried to use in open() a PerlIO layer that does not exist,
889 e.g. open(FH, ">:nosuchlayer", "somefile").
891 =item Can't make list assignment to \%ENV on this system
893 (F) List assignment to %ENV is not supported on some systems, notably
896 =item Can't modify %s in %s
898 (F) You aren't allowed to assign to the item indicated, or otherwise try
899 to change it, such as with an auto-increment.
901 =item Can't modify nonexistent substring
903 (P) The internal routine that does assignment to a substr() was handed
906 =item Can't modify non-lvalue subroutine call
908 (F) Subroutines meant to be used in lvalue context should be declared as
909 such, see L<perlsub/"Lvalue subroutines">.
911 =item Can't msgrcv to read-only var
913 (F) The target of a msgrcv must be modifiable to be used as a receive
916 =item Can't "next" outside a loop block
918 (F) A "next" statement was executed to reiterate the current block, but
919 there isn't a current block. Note that an "if" or "else" block doesn't
920 count as a "loopish" block, as doesn't a block given to sort(), map() or
921 grep(). You can usually double the curlies to get the same effect
922 though, because the inner curlies will be considered a block that loops
923 once. See L<perlfunc/next>.
925 =item Can't open %s: %s
927 (S inplace) The implicit opening of a file through use of the C<< <> >>
928 filehandle, either implicitly under the C<-n> or C<-p> command-line
929 switches, or explicitly, failed for the indicated reason. Usually this
930 is because you don't have read permission for a file which you named on
933 =item Can't open a reference
935 (W io) You tried to open a scalar reference for reading or writing,
936 using the 3-arg open() syntax :
940 but your version of perl is compiled without perlio, and this form of
941 open is not supported.
943 =item Can't open bidirectional pipe
945 (W pipe) You tried to say C<open(CMD, "|cmd|")>, which is not supported.
946 You can try any of several modules in the Perl library to do this, such
947 as IPC::Open2. Alternately, direct the pipe's output to a file using
948 ">", and then read it in under a different file handle.
950 =item Can't open error file %s as stderr
952 (F) An error peculiar to VMS. Perl does its own command line
953 redirection, and couldn't open the file specified after '2>' or '2>>' on
954 the command line for writing.
956 =item Can't open input file %s as stdin
958 (F) An error peculiar to VMS. Perl does its own command line
959 redirection, and couldn't open the file specified after '<' on the
960 command line for reading.
962 =item Can't open output file %s as stdout
964 (F) An error peculiar to VMS. Perl does its own command line
965 redirection, and couldn't open the file specified after '>' or '>>' on
966 the command line for writing.
968 =item Can't open output pipe (name: %s)
970 (P) An error peculiar to VMS. Perl does its own command line
971 redirection, and couldn't open the pipe into which to send data destined
974 =item Can't open perl script%s
976 (F) The script you specified can't be opened for the indicated reason.
978 If you're debugging a script that uses #!, and normally relies on the
979 shell's $PATH search, the -S option causes perl to do that search, so
980 you don't have to type the path or C<`which $scriptname`>.
982 =item Can't read CRTL environ
984 (S) A warning peculiar to VMS. Perl tried to read an element of %ENV
985 from the CRTL's internal environment array and discovered the array was
986 missing. You need to figure out where your CRTL misplaced its environ
987 or define F<PERL_ENV_TABLES> (see L<perlvms>) so that environ is not
990 =item Can't "redo" outside a loop block
992 (F) A "redo" statement was executed to restart the current block, but
993 there isn't a current block. Note that an "if" or "else" block doesn't
994 count as a "loopish" block, as doesn't a block given to sort(), map()
995 or grep(). You can usually double the curlies to get the same effect
996 though, because the inner curlies will be considered a block that
997 loops once. See L<perlfunc/redo>.
999 =item Can't remove %s: %s, skipping file
1001 (S inplace) You requested an inplace edit without creating a backup
1002 file. Perl was unable to remove the original file to replace it with
1003 the modified file. The file was left unmodified.
1005 =item Can't rename %s to %s: %s, skipping file
1007 (S inplace) The rename done by the B<-i> switch failed for some reason,
1008 probably because you don't have write permission to the directory.
1010 =item Can't reopen input pipe (name: %s) in binary mode
1012 (P) An error peculiar to VMS. Perl thought stdin was a pipe, and tried
1013 to reopen it to accept binary data. Alas, it failed.
1015 =item Can't resolve method `%s' overloading `%s' in package `%s'
1017 (F|P) Error resolving overloading specified by a method name (as opposed
1018 to a subroutine reference): no such method callable via the package. If
1019 method name is C<???>, this is an internal error.
1021 =item Can't reswap uid and euid
1023 (P) The setreuid() call failed for some reason in the setuid emulator of
1026 =item Can't return %s from lvalue subroutine
1028 (F) Perl detected an attempt to return illegal lvalues (such as
1029 temporary or readonly values) from a subroutine used as an lvalue. This
1032 =item Can't return outside a subroutine
1034 (F) The return statement was executed in mainline code, that is, where
1035 there was no subroutine call to return out of. See L<perlsub>.
1037 =item Can't return %s to lvalue scalar context
1039 (F) You tried to return a complete array or hash from an lvalue subroutine,
1040 but you called the subroutine in a way that made Perl think you meant
1041 to return only one value. You probably meant to write parentheses around
1042 the call to the subroutine, which tell Perl that the call should be in
1045 =item Can't stat script "%s"
1047 (P) For some reason you can't fstat() the script even though you have it
1048 open already. Bizarre.
1050 =item Can't swap uid and euid
1052 (P) The setreuid() call failed for some reason in the setuid emulator of
1055 =item Can't take log of %g
1057 (F) For ordinary real numbers, you can't take the logarithm of a
1058 negative number or zero. There's a Math::Complex package that comes
1059 standard with Perl, though, if you really want to do that for the
1062 =item Can't take sqrt of %g
1064 (F) For ordinary real numbers, you can't take the square root of a
1065 negative number. There's a Math::Complex package that comes standard
1066 with Perl, though, if you really want to do that.
1068 =item Can't undef active subroutine
1070 (F) You can't undefine a routine that's currently running. You can,
1071 however, redefine it while it's running, and you can even undef the
1072 redefined subroutine while the old routine is running. Go figure.
1076 (F) You tried to unshift an "unreal" array that can't be unshifted, such
1077 as the main Perl stack.
1079 =item Can't upgrade %s (%d) to %d
1081 (P) The internal sv_upgrade routine adds "members" to an SV, making it
1082 into a more specialized kind of SV. The top several SV types are so
1083 specialized, however, that they cannot be interconverted. This message
1084 indicates that such a conversion was attempted.
1086 =item Can't use anonymous symbol table for method lookup
1088 (F) The internal routine that does method lookup was handed a symbol
1089 table that doesn't have a name. Symbol tables can become anonymous
1090 for example by undefining stashes: C<undef %Some::Package::>.
1092 =item Can't use an undefined value as %s reference
1094 (F) A value used as either a hard reference or a symbolic reference must
1095 be a defined value. This helps to delurk some insidious errors.
1097 =item Can't use bareword ("%s") as %s ref while "strict refs" in use
1099 (F) Only hard references are allowed by "strict refs". Symbolic
1100 references are disallowed. See L<perlref>.
1102 =item Can't use %! because Errno.pm is not available
1104 (F) The first time the %! hash is used, perl automatically loads the
1105 Errno.pm module. The Errno module is expected to tie the %! hash to
1106 provide symbolic names for C<$!> errno values.
1108 =item Can't use both '<' and '>' after type '%c' in %s
1110 (F) A type cannot be forced to have both big-endian and little-endian
1111 byte-order at the same time, so this combination of modifiers is not
1112 allowed. See L<perlfunc/pack>.
1114 =item Can't use %s for loop variable
1116 (F) Only a simple scalar variable may be used as a loop variable on a
1119 =item Can't use global %s in "my"
1121 (F) You tried to declare a magical variable as a lexical variable. This
1122 is not allowed, because the magic can be tied to only one location
1123 (namely the global variable) and it would be incredibly confusing to
1124 have variables in your program that looked like magical variables but
1127 =item Can't use '%c' in a group with different byte-order in %s
1129 (F) You attempted to force a different byte-order on a type
1130 that is already inside a group with a byte-order modifier.
1131 For example you cannot force little-endianness on a type that
1132 is inside a big-endian group.
1134 =item Can't use "my %s" in sort comparison
1136 (F) The global variables $a and $b are reserved for sort comparisons.
1137 You mentioned $a or $b in the same line as the <=> or cmp operator,
1138 and the variable had earlier been declared as a lexical variable.
1139 Either qualify the sort variable with the package name, or rename the
1142 =item Can't use %s ref as %s ref
1144 (F) You've mixed up your reference types. You have to dereference a
1145 reference of the type needed. You can use the ref() function to
1146 test the type of the reference, if need be.
1148 =item Can't use string ("%s") as %s ref while "strict refs" in use
1150 (F) Only hard references are allowed by "strict refs". Symbolic
1151 references are disallowed. See L<perlref>.
1153 =item Can't use subscript on %s
1155 (F) The compiler tried to interpret a bracketed expression as a
1156 subscript. But to the left of the brackets was an expression that
1157 didn't look like a hash or array reference, or anything else subscriptable.
1159 =item Can't use \%c to mean $%c in expression
1161 (W syntax) In an ordinary expression, backslash is a unary operator that
1162 creates a reference to its argument. The use of backslash to indicate a
1163 backreference to a matched substring is valid only as part of a regular
1164 expression pattern. Trying to do this in ordinary Perl code produces a
1165 value that prints out looking like SCALAR(0xdecaf). Use the $1 form
1168 =item Can't use "when" outside a topicalizer
1170 (F) You have used a when() block that is neither inside a C<foreach>
1171 loop nor a C<given> block. (Note that this error is issued on exit
1172 from the C<when> block, so you won't get the error if the match fails,
1173 or if you use an explicit C<continue>.)
1175 =item Can't weaken a nonreference
1177 (F) You attempted to weaken something that was not a reference. Only
1178 references can be weakened.
1180 =item Can't x= to read-only value
1182 (F) You tried to repeat a constant value (often the undefined value)
1183 with an assignment operator, which implies modifying the value itself.
1184 Perhaps you need to copy the value to a temporary, and repeat that.
1186 =item Character in 'C' format wrapped in pack
1192 where $x is either less than 0 or more than 255; the C<"C"> format is
1193 only for encoding native operating system characters (ASCII, EBCDIC,
1194 and so on) and not for Unicode characters, so Perl behaved as if you meant
1198 If you actually want to pack Unicode codepoints, use the C<"U"> format
1201 =item Character in 'W' format wrapped in pack
1207 where $x is either less than 0 or more than 255. However, C<U0>-mode expects
1208 all values to fall in the interval [0, 255], so Perl behaved as if you
1211 pack("U0W", $x & 255)
1213 =item Character in 'c' format wrapped in pack
1219 where $x is either less than -128 or more than 127; the C<"c"> format
1220 is only for encoding native operating system characters (ASCII, EBCDIC,
1221 and so on) and not for Unicode characters, so Perl behaved as if you meant
1223 pack("c", $x & 255);
1225 If you actually want to pack Unicode codepoints, use the C<"U"> format
1228 =item Character in '%c' format wrapped in unpack
1230 (W unpack) You tried something like
1232 unpack("H", "\x{2a1}")
1234 where the format expects to process a byte (a character with a value
1235 below 256), but a higher value was provided instead. Perl uses the value
1236 modulus 256 instead, as if you had provided:
1238 unpack("H", "\x{a1}")
1240 =item Character(s) in '%c' format wrapped in pack
1242 (W pack) You tried something like
1244 pack("u", "\x{1f3}b")
1246 where the format expects to process a sequence of bytes (character with a
1247 value below 256), but some of the characters had a higher value. Perl
1248 uses the character values modulus 256 instead, as if you had provided:
1250 pack("u", "\x{f3}b")
1252 =item Character(s) in '%c' format wrapped in unpack
1254 (W unpack) You tried something like
1256 unpack("s", "\x{1f3}b")
1258 where the format expects to process a sequence of bytes (character with a
1259 value below 256), but some of the characters had a higher value. Perl
1260 uses the character values modulus 256 instead, as if you had provided:
1262 unpack("s", "\x{f3}b")
1264 =item close() on unopened filehandle %s
1266 (W unopened) You tried to close a filehandle that was never opened.
1268 =item closedir() attempted on invalid dirhandle %s
1270 (W io) The dirhandle you tried to close is either closed or not really
1271 a dirhandle. Check your control flow.
1273 =item Code missing after '/'
1275 (F) You had a (sub-)template that ends with a '/'. There must be another
1276 template code following the slash. See L<perlfunc/pack>.
1278 =item %s: Command not found
1280 (A) You've accidentally run your script through B<csh> instead of Perl.
1281 Check the #! line, or manually feed your script into Perl yourself.
1283 =item Compilation failed in require
1285 (F) Perl could not compile a file specified in a C<require> statement.
1286 Perl uses this generic message when none of the errors that it
1287 encountered were severe enough to halt compilation immediately.
1289 =item Complex regular subexpression recursion limit (%d) exceeded
1291 (W regexp) The regular expression engine uses recursion in complex
1292 situations where back-tracking is required. Recursion depth is limited
1293 to 32766, or perhaps less in architectures where the stack cannot grow
1294 arbitrarily. ("Simple" and "medium" situations are handled without
1295 recursion and are not subject to a limit.) Try shortening the string
1296 under examination; looping in Perl code (e.g. with C<while>) rather than
1297 in the regular expression engine; or rewriting the regular expression so
1298 that it is simpler or backtracks less. (See L<perlfaq2> for information
1299 on I<Mastering Regular Expressions>.)
1301 =item cond_broadcast() called on unlocked variable
1303 (W threads) Within a thread-enabled program, you tried to call
1304 cond_broadcast() on a variable which wasn't locked. The cond_broadcast()
1305 function is used to wake up another thread that is waiting in a
1306 cond_wait(). To ensure that the signal isn't sent before the other thread
1307 has a chance to enter the wait, it is usual for the signaling thread to
1308 first wait for a lock on variable. This lock attempt will only succeed
1309 after the other thread has entered cond_wait() and thus relinquished the
1312 =item cond_signal() called on unlocked variable
1314 (W threads) Within a thread-enabled program, you tried to call
1315 cond_signal() on a variable which wasn't locked. The cond_signal()
1316 function is used to wake up another thread that is waiting in a
1317 cond_wait(). To ensure that the signal isn't sent before the other thread
1318 has a chance to enter the wait, it is usual for the signaling thread to
1319 first wait for a lock on variable. This lock attempt will only succeed
1320 after the other thread has entered cond_wait() and thus relinquished the
1323 =item connect() on closed socket %s
1325 (W closed) You tried to do a connect on a closed socket. Did you forget
1326 to check the return value of your socket() call? See
1327 L<perlfunc/connect>.
1329 =item Constant(%s)%s: %s
1331 (F) The parser found inconsistencies either while attempting to define
1332 an overloaded constant, or when trying to find the character name
1333 specified in the C<\N{...}> escape. Perhaps you forgot to load the
1334 corresponding C<overload> or C<charnames> pragma? See L<charnames> and
1337 =item Constant(%s)%s: %s in regex; marked by <-- HERE in m/%s/
1339 (F) The parser found inconsistencies while attempting to find
1340 the character name specified in the C<\N{...}> escape. Perhaps you
1341 forgot to load the corresponding C<charnames> pragma?
1345 =item Constant is not %s reference
1347 (F) A constant value (perhaps declared using the C<use constant> pragma)
1348 is being dereferenced, but it amounts to the wrong type of reference.
1349 The message indicates the type of reference that was expected. This
1350 usually indicates a syntax error in dereferencing the constant value.
1351 See L<perlsub/"Constant Functions"> and L<constant>.
1353 =item Constant subroutine %s redefined
1355 (S) You redefined a subroutine which had previously been
1356 eligible for inlining. See L<perlsub/"Constant Functions"> for
1357 commentary and workarounds.
1359 =item Constant subroutine %s undefined
1361 (W misc) You undefined a subroutine which had previously been eligible
1362 for inlining. See L<perlsub/"Constant Functions"> for commentary and
1365 =item Copy method did not return a reference
1367 (F) The method which overloads "=" is buggy. See
1368 L<overload/Copy Constructor>.
1370 =item CORE::%s is not a keyword
1372 (F) The CORE:: namespace is reserved for Perl keywords.
1374 =item corrupted regexp pointers
1376 (P) The regular expression engine got confused by what the regular
1377 expression compiler gave it.
1379 =item corrupted regexp program
1381 (P) The regular expression engine got passed a regexp program without a
1384 =item Corrupt malloc ptr 0x%lx at 0x%lx
1386 (P) The malloc package that comes with Perl had an internal failure.
1388 =item Count after length/code in unpack
1390 (F) You had an unpack template indicating a counted-length string, but
1391 you have also specified an explicit size for the string. See
1394 =item Deep recursion on subroutine "%s"
1396 (W recursion) This subroutine has called itself (directly or indirectly)
1397 100 times more than it has returned. This probably indicates an
1398 infinite recursion, unless you're writing strange benchmark programs, in
1399 which case it indicates something else.
1401 =item defined(@array) is deprecated
1403 (D deprecated) defined() is not usually useful on arrays because it
1404 checks for an undefined I<scalar> value. If you want to see if the
1405 array is empty, just use C<if (@array) { # not empty }> for example.
1407 =item defined(%hash) is deprecated
1409 (D deprecated) defined() is not usually useful on hashes because it
1410 checks for an undefined I<scalar> value. If you want to see if the hash
1411 is empty, just use C<if (%hash) { # not empty }> for example.
1413 =item %s defines neither package nor VERSION--version check failed
1415 (F) You said something like "use Module 42" but in the Module file
1416 there are neither package declarations nor a C<$VERSION>.
1418 =item Delimiter for here document is too long
1420 (F) In a here document construct like C<<<FOO>, the label C<FOO> is too
1421 long for Perl to handle. You have to be seriously twisted to write code
1422 that triggers this error.
1424 =item Deprecated use of my() in false conditional
1426 (D deprecated) You used a declaration similar to C<my $x if 0>.
1427 There has been a long-standing bug in Perl that causes a lexical variable
1428 not to be cleared at scope exit when its declaration includes a false
1429 conditional. Some people have exploited this bug to achieve a kind of
1430 static variable. Since we intend to fix this bug, we don't want people
1431 relying on this behavior. You can achieve a similar static effect by
1432 declaring the variable in a separate block outside the function, eg
1434 sub f { my $x if 0; return $x++ }
1438 { my $x; sub f { return $x++ } }
1440 Beginning with perl 5.9.4, you can also use C<state> variables to
1441 have lexicals that are initialized only once (see L<feature>):
1443 sub f { state $x; return $x++ }
1445 =item DESTROY created new reference to dead object '%s'
1447 (F) A DESTROY() method created a new reference to the object which is
1448 just being DESTROYed. Perl is confused, and prefers to abort rather than
1449 to create a dangling reference.
1451 =item Did not produce a valid header
1455 =item %s did not return a true value
1457 (F) A required (or used) file must return a true value to indicate that
1458 it compiled correctly and ran its initialization code correctly. It's
1459 traditional to end such a file with a "1;", though any true value would
1460 do. See L<perlfunc/require>.
1462 =item (Did you mean &%s instead?)
1464 (W) You probably referred to an imported subroutine &FOO as $FOO or some
1467 =item (Did you mean "local" instead of "our"?)
1469 (W misc) Remember that "our" does not localize the declared global
1470 variable. You have declared it again in the same lexical scope, which
1473 =item (Did you mean $ or @ instead of %?)
1475 (W) You probably said %hash{$key} when you meant $hash{$key} or
1476 @hash{@keys}. On the other hand, maybe you just meant %hash and got
1481 (F) You passed die() an empty string (the equivalent of C<die "">) or
1482 you called it with no args and both C<$@> and C<$_> were empty.
1484 =item Document contains no data
1488 =item %s does not define %s::VERSION--version check failed
1490 (F) You said something like "use Module 42" but the Module did not
1491 define a C<$VERSION.>
1493 =item '/' does not take a repeat count
1495 (F) You cannot put a repeat count of any kind right after the '/' code.
1496 See L<perlfunc/pack>.
1498 =item Don't know how to handle magic of type '%s'
1500 (P) The internal handling of magical variables has been cursed.
1502 =item do_study: out of memory
1504 (P) This should have been caught by safemalloc() instead.
1506 =item (Do you need to predeclare %s?)
1508 (S syntax) This is an educated guess made in conjunction with the message
1509 "%s found where operator expected". It often means a subroutine or module
1510 name is being referenced that hasn't been declared yet. This may be
1511 because of ordering problems in your file, or because of a missing
1512 "sub", "package", "require", or "use" statement. If you're referencing
1513 something that isn't defined yet, you don't actually have to define the
1514 subroutine or package before the current location. You can use an empty
1515 "sub foo;" or "package FOO;" to enter a "forward" declaration.
1517 =item dump() better written as CORE::dump()
1519 (W misc) You used the obsolescent C<dump()> built-in function, without fully
1520 qualifying it as C<CORE::dump()>. Maybe it's a typo. See L<perlfunc/dump>.
1522 =item dump is not supported
1524 (F) Your machine doesn't support dump/undump.
1526 =item Duplicate free() ignored
1528 (S malloc) An internal routine called free() on something that had
1531 =item Duplicate modifier '%c' after '%c' in %s
1533 (W) You have applied the same modifier more than once after a type
1534 in a pack template. See L<perlfunc/pack>.
1536 =item elseif should be elsif
1538 (S syntax) There is no keyword "elseif" in Perl because Larry thinks it's
1539 ugly. Your code will be interpreted as an attempt to call a method named
1540 "elseif" for the class returned by the following block. This is
1541 unlikely to be what you want.
1545 (F) C<\p> and C<\P> are used to introduce a named Unicode property, as
1546 described in L<perlunicode> and L<perlre>. You used C<\p> or C<\P> in
1547 a regular expression without specifying the property name.
1549 =item entering effective %s failed
1551 (F) While under the C<use filetest> pragma, switching the real and
1552 effective uids or gids failed.
1554 =item %ENV is aliased to %s
1556 (F) You're running under taint mode, and the C<%ENV> variable has been
1557 aliased to another hash, so it doesn't reflect anymore the state of the
1558 program's environment. This is potentially insecure.
1560 =item Error converting file specification %s
1562 (F) An error peculiar to VMS. Because Perl may have to deal with file
1563 specifications in either VMS or Unix syntax, it converts them to a
1564 single form when it must operate on them directly. Either you've passed
1565 an invalid file specification to Perl, or you've found a case the
1566 conversion routines don't handle. Drat.
1568 =item %s: Eval-group in insecure regular expression
1570 (F) Perl detected tainted data when trying to compile a regular
1571 expression that contains the C<(?{ ... })> zero-width assertion, which
1572 is unsafe. See L<perlre/(?{ code })>, and L<perlsec>.
1574 =item %s: Eval-group not allowed at run time
1576 (F) Perl tried to compile a regular expression containing the
1577 C<(?{ ... })> zero-width assertion at run time, as it would when the
1578 pattern contains interpolated values. Since that is a security risk, it
1579 is not allowed. If you insist, you may still do this by explicitly
1580 building the pattern from an interpolated string at run time and using
1581 that in an eval(). See L<perlre/(?{ code })>.
1583 =item %s: Eval-group not allowed, use re 'eval'
1585 (F) A regular expression contained the C<(?{ ... })> zero-width
1586 assertion, but that construct is only allowed when the C<use re 'eval'>
1587 pragma is in effect. See L<perlre/(?{ code })>.
1589 =item EVAL without pos change exceeded limit in regex; marked by <-- HERE in m/%s/
1591 (F) You used a pattern that nested too many EVAL calls without consuming
1592 any text. Restructure the pattern so that text is consumed.
1594 The <-- HERE shows in the regular expression about where the problem was
1597 =item Excessively long <> operator
1599 (F) The contents of a <> operator may not exceed the maximum size of a
1600 Perl identifier. If you're just trying to glob a long list of
1601 filenames, try using the glob() operator, or put the filenames into a
1602 variable and glob that.
1604 =item exec? I'm not *that* kind of operating system
1606 (F) The C<exec> function is not implemented in MacPerl. See L<perlport>.
1608 =item Execution of %s aborted due to compilation errors
1610 (F) The final summary message when a Perl compilation fails.
1612 =item Exiting eval via %s
1614 (W exiting) You are exiting an eval by unconventional means, such as a
1615 goto, or a loop control statement.
1617 =item Exiting format via %s
1619 (W exiting) You are exiting a format by unconventional means, such as a
1620 goto, or a loop control statement.
1622 =item Exiting pseudo-block via %s
1624 (W exiting) You are exiting a rather special block construct (like a
1625 sort block or subroutine) by unconventional means, such as a goto, or a
1626 loop control statement. See L<perlfunc/sort>.
1628 =item Exiting subroutine via %s
1630 (W exiting) You are exiting a subroutine by unconventional means, such
1631 as a goto, or a loop control statement.
1633 =item Exiting substitution via %s
1635 (W exiting) You are exiting a substitution by unconventional means, such
1636 as a return, a goto, or a loop control statement.
1638 =item Explicit blessing to '' (assuming package main)
1640 (W misc) You are blessing a reference to a zero length string. This has
1641 the effect of blessing the reference into the package main. This is
1642 usually not what you want. Consider providing a default target package,
1643 e.g. bless($ref, $p || 'MyPackage');
1645 =item %s: Expression syntax
1647 (A) You've accidentally run your script through B<csh> instead of Perl.
1648 Check the #! line, or manually feed your script into Perl yourself.
1650 =item %s failed--call queue aborted
1652 (F) An untrapped exception was raised while executing a UNITCHECK,
1653 CHECK, INIT, or END subroutine. Processing of the remainder of the
1654 queue of such routines has been prematurely ended.
1656 =item False [] range "%s" in regex; marked by <-- HERE in m/%s/
1658 (W regexp) A character class range must start and end at a literal
1659 character, not another character class like C<\d> or C<[:alpha:]>. The "-"
1660 in your false range is interpreted as a literal "-". Consider quoting the
1661 "-", "\-". The <-- HERE shows in the regular expression about where the
1662 problem was discovered. See L<perlre>.
1664 =item Fatal VMS error at %s, line %d
1666 (P) An error peculiar to VMS. Something untoward happened in a VMS
1667 system service or RTL routine; Perl's exit status should provide more
1668 details. The filename in "at %s" and the line number in "line %d" tell
1669 you which section of the Perl source code is distressed.
1671 =item fcntl is not implemented
1673 (F) Your machine apparently doesn't implement fcntl(). What is this, a
1674 PDP-11 or something?
1676 =item Field too wide in 'u' format in pack
1678 (W pack) Each line in an uuencoded string start with a length indicator
1679 which can't encode values above 63. So there is no point in asking for
1680 a line length bigger than that. Perl will behave as if you specified
1683 =item Filehandle %s opened only for input
1685 (W io) You tried to write on a read-only filehandle. If you intended
1686 it to be a read-write filehandle, you needed to open it with "+<" or
1687 "+>" or "+>>" instead of with "<" or nothing. If you intended only to
1688 write the file, use ">" or ">>". See L<perlfunc/open>.
1690 =item Filehandle %s opened only for output
1692 (W io) You tried to read from a filehandle opened only for writing, If
1693 you intended it to be a read/write filehandle, you needed to open it
1694 with "+<" or "+>" or "+>>" instead of with "<" or nothing. If you
1695 intended only to read from the file, use "<". See L<perlfunc/open>.
1696 Another possibility is that you attempted to open filedescriptor 0
1697 (also known as STDIN) for output (maybe you closed STDIN earlier?).
1699 =item Filehandle %s reopened as %s only for input
1701 (W io) You opened for reading a filehandle that got the same filehandle id
1702 as STDOUT or STDERR. This occurred because you closed STDOUT or STDERR
1705 =item Filehandle STDIN reopened as %s only for output
1707 (W io) You opened for writing a filehandle that got the same filehandle id
1708 as STDIN. This occurred because you closed STDIN previously.
1710 =item Final $ should be \$ or $name
1712 (F) You must now decide whether the final $ in a string was meant to be
1713 a literal dollar sign, or was meant to introduce a variable name that
1714 happens to be missing. So you have to put either the backslash or the
1717 =item flock() on closed filehandle %s
1719 (W closed) The filehandle you're attempting to flock() got itself closed
1720 some time before now. Check your control flow. flock() operates on
1721 filehandles. Are you attempting to call flock() on a dirhandle by the
1724 =item Format not terminated
1726 (F) A format must be terminated by a line with a solitary dot. Perl got
1727 to the end of your file without finding such a line.
1729 =item Format %s redefined
1731 (W redefine) You redefined a format. To suppress this warning, say
1734 no warnings 'redefine';
1735 eval "format NAME =...";
1738 =item Found = in conditional, should be ==
1748 (or something like that).
1750 =item %s found where operator expected
1752 (S syntax) The Perl lexer knows whether to expect a term or an operator.
1753 If it sees what it knows to be a term when it was expecting to see an
1754 operator, it gives you this warning. Usually it indicates that an
1755 operator or delimiter was omitted, such as a semicolon.
1757 =item gdbm store returned %d, errno %d, key "%s"
1759 (S) A warning from the GDBM_File extension that a store failed.
1761 =item gethostent not implemented
1763 (F) Your C library apparently doesn't implement gethostent(), probably
1764 because if it did, it'd feel morally obligated to return every hostname
1767 =item get%sname() on closed socket %s
1769 (W closed) You tried to get a socket or peer socket name on a closed
1770 socket. Did you forget to check the return value of your socket() call?
1772 =item getpwnam returned invalid UIC %#o for user "%s"
1774 (S) A warning peculiar to VMS. The call to C<sys$getuai> underlying the
1775 C<getpwnam> operator returned an invalid UIC.
1777 =item getsockopt() on closed socket %s
1779 (W closed) You tried to get a socket option on a closed socket. Did you
1780 forget to check the return value of your socket() call? See
1781 L<perlfunc/getsockopt>.
1783 =item Global symbol "%s" requires explicit package name
1785 (F) You've said "use strict vars", which indicates that all variables
1786 must either be lexically scoped (using "my"), declared beforehand using
1787 "our", or explicitly qualified to say which package the global variable
1790 =item glob failed (%s)
1792 (W glob) Something went wrong with the external program(s) used for
1793 C<glob> and C<< <*.c> >>. Usually, this means that you supplied a
1794 C<glob> pattern that caused the external program to fail and exit with a
1795 nonzero status. If the message indicates that the abnormal exit
1796 resulted in a coredump, this may also mean that your csh (C shell) is
1797 broken. If so, you should change all of the csh-related variables in
1798 config.sh: If you have tcsh, make the variables refer to it as if it
1799 were csh (e.g. C<full_csh='/usr/bin/tcsh'>); otherwise, make them all
1800 empty (except that C<d_csh> should be C<'undef'>) so that Perl will
1801 think csh is missing. In either case, after editing config.sh, run
1802 C<./Configure -S> and rebuild Perl.
1804 =item Glob not terminated
1806 (F) The lexer saw a left angle bracket in a place where it was expecting
1807 a term, so it's looking for the corresponding right angle bracket, and
1808 not finding it. Chances are you left some needed parentheses out
1809 earlier in the line, and you really meant a "less than".
1811 =item Got an error from DosAllocMem
1813 (P) An error peculiar to OS/2. Most probably you're using an obsolete
1814 version of Perl, and this should not happen anyway.
1816 =item goto must have label
1818 (F) Unlike with "next" or "last", you're not allowed to goto an
1819 unspecified destination. See L<perlfunc/goto>.
1821 =item ()-group starts with a count
1823 (F) A ()-group started with a count. A count is
1824 supposed to follow something: a template character or a ()-group.
1825 See L<perlfunc/pack>.
1827 =item %s had compilation errors
1829 (F) The final summary message when a C<perl -c> fails.
1831 =item Had to create %s unexpectedly
1833 (S internal) A routine asked for a symbol from a symbol table that ought
1834 to have existed already, but for some reason it didn't, and had to be
1835 created on an emergency basis to prevent a core dump.
1837 =item Hash %%s missing the % in argument %d of %s()
1839 (D deprecated) Really old Perl let you omit the % on hash names in some
1840 spots. This is now heavily deprecated.
1842 =item %s has too many errors
1844 (F) The parser has given up trying to parse the program after 10 errors.
1845 Further error messages would likely be uninformative.
1847 =item Hexadecimal number > 0xffffffff non-portable
1849 (W portable) The hexadecimal number you specified is larger than 2**32-1
1850 (4294967295) and therefore non-portable between systems. See
1851 L<perlport> for more on portability concerns.
1853 =item Identifier too long
1855 (F) Perl limits identifiers (names for variables, functions, etc.) to
1856 about 250 characters for simple names, and somewhat more for compound
1857 names (like C<$A::B>). You've exceeded Perl's limits. Future versions
1858 of Perl are likely to eliminate these arbitrary limitations.
1860 =item Ignoring %s in character class in regex; marked by <-- HERE in m/%s/
1862 (W) Named unicode character escapes (\N{...}) may return multi-char
1863 or zero length sequences. When such an escape is used in a character class
1864 its behaviour is not well defined. Check that the correct escape has
1865 been used, and the correct charname handler is in scope.
1867 =item Illegal binary digit %s
1869 (F) You used a digit other than 0 or 1 in a binary number.
1871 =item Illegal binary digit %s ignored
1873 (W digit) You may have tried to use a digit other than 0 or 1 in a
1874 binary number. Interpretation of the binary number stopped before the
1877 =item Illegal character %s (carriage return)
1879 (F) Perl normally treats carriage returns in the program text as it
1880 would any other whitespace, which means you should never see this error
1881 when Perl was built using standard options. For some reason, your
1882 version of Perl appears to have been built without this support. Talk
1883 to your Perl administrator.
1885 =item Illegal character in prototype for %s : %s
1887 (W syntax) An illegal character was found in a prototype declaration. Legal
1888 characters in prototypes are $, @, %, *, ;, [, ], &, and \.
1890 =item Illegal declaration of anonymous subroutine
1892 (F) When using the C<sub> keyword to construct an anonymous subroutine,
1893 you must always specify a block of code. See L<perlsub>.
1895 =item Illegal declaration of subroutine %s
1897 (F) A subroutine was not declared correctly. See L<perlsub>.
1899 =item Illegal division by zero
1901 (F) You tried to divide a number by 0. Either something was wrong in
1902 your logic, or you need to put a conditional in to guard against
1905 =item Illegal hexadecimal digit %s ignored
1907 (W digit) You may have tried to use a character other than 0 - 9 or
1908 A - F, a - f in a hexadecimal number. Interpretation of the hexadecimal
1909 number stopped before the illegal character.
1911 =item Illegal modulus zero
1913 (F) You tried to divide a number by 0 to get the remainder. Most
1914 numbers don't take to this kindly.
1916 =item Illegal number of bits in vec
1918 (F) The number of bits in vec() (the third argument) must be a power of
1919 two from 1 to 32 (or 64, if your platform supports that).
1921 =item Illegal octal digit %s
1923 (F) You used an 8 or 9 in an octal number.
1925 =item Illegal octal digit %s ignored
1927 (W digit) You may have tried to use an 8 or 9 in an octal number.
1928 Interpretation of the octal number stopped before the 8 or 9.
1930 =item Illegal switch in PERL5OPT: %s
1932 (X) The PERL5OPT environment variable may only be used to set the
1933 following switches: B<-[CDIMUdmtwA]>.
1935 =item Ill-formed CRTL environ value "%s"
1937 (W internal) A warning peculiar to VMS. Perl tried to read the CRTL's
1938 internal environ array, and encountered an element without the C<=>
1939 delimiter used to separate keys from values. The element is ignored.
1941 =item Ill-formed message in prime_env_iter: |%s|
1943 (W internal) A warning peculiar to VMS. Perl tried to read a logical
1944 name or CLI symbol definition when preparing to iterate over %ENV, and
1945 didn't see the expected delimiter between key and value, so the line was
1948 =item Impossible to activate assertion call
1950 (W assertions) You're calling an assertion function in a block that is
1951 not under the control of the C<assertions> pragma.
1953 =item (in cleanup) %s
1955 (W misc) This prefix usually indicates that a DESTROY() method raised
1956 the indicated exception. Since destructors are usually called by the
1957 system at arbitrary points during execution, and often a vast number of
1958 times, the warning is issued only once for any number of failures that
1959 would otherwise result in the same message being repeated.
1961 Failure of user callbacks dispatched using the C<G_KEEPERR> flag could
1962 also result in this warning. See L<perlcall/G_KEEPERR>.
1964 =item In EBCDIC the v-string components cannot exceed 2147483647
1966 (F) An error peculiar to EBCDIC. Internally, v-strings are stored as
1967 Unicode code points, and encoded in EBCDIC as UTF-EBCDIC. The UTF-EBCDIC
1968 encoding is limited to code points no larger than 2147483647 (0x7FFFFFFF).
1970 =item Infinite recursion in regex; marked by <-- HERE in m/%s/
1972 (F) You used a pattern that references itself without consuming any input
1973 text. You should check the pattern to ensure that recursive patterns
1974 either consume text or fail.
1976 The <-- HERE shows in the regular expression about where the problem was
1979 =item Insecure dependency in %s
1981 (F) You tried to do something that the tainting mechanism didn't like.
1982 The tainting mechanism is turned on when you're running setuid or
1983 setgid, or when you specify B<-T> to turn it on explicitly. The
1984 tainting mechanism labels all data that's derived directly or indirectly
1985 from the user, who is considered to be unworthy of your trust. If any
1986 such data is used in a "dangerous" operation, you get this error. See
1987 L<perlsec> for more information.
1989 =item Insecure directory in %s
1991 (F) You can't use system(), exec(), or a piped open in a setuid or
1992 setgid script if C<$ENV{PATH}> contains a directory that is writable by
1993 the world. Also, the PATH must not contain any relative directory.
1996 =item Insecure $ENV{%s} while running %s
1998 (F) You can't use system(), exec(), or a piped open in a setuid or
1999 setgid script if any of C<$ENV{PATH}>, C<$ENV{IFS}>, C<$ENV{CDPATH}>,
2000 C<$ENV{ENV}>, C<$ENV{BASH_ENV}> or C<$ENV{TERM}> are derived from data
2001 supplied (or potentially supplied) by the user. The script must set
2002 the path to a known value, using trustworthy data. See L<perlsec>.
2004 =item Integer overflow in %s number
2006 (W overflow) The hexadecimal, octal or binary number you have specified
2007 either as a literal or as an argument to hex() or oct() is too big for
2008 your architecture, and has been converted to a floating point number.
2009 On a 32-bit architecture the largest hexadecimal, octal or binary number
2010 representable without overflow is 0xFFFFFFFF, 037777777777, or
2011 0b11111111111111111111111111111111 respectively. Note that Perl
2012 transparently promotes all numbers to a floating point representation
2013 internally--subject to loss of precision errors in subsequent
2016 =item Integer overflow in format string for %s
2018 (F) The indexes and widths specified in the format string of C<printf()>
2019 or C<sprintf()> are too large. The numbers must not overflow the size of
2020 integers for your architecture.
2022 =item Integer overflow in version
2024 (F) Some portion of a version initialization is too large for the
2025 size of integers for your architecture. This is not a warning
2026 because there is no rational reason for a version to try and use a
2027 element larger than typically 2**32. This is usually caused by
2028 trying to use some odd mathematical operation as a version, like
2031 =item Internal disaster in regex; marked by <-- HERE in m/%s/
2033 (P) Something went badly wrong in the regular expression parser.
2034 The <-- HERE shows in the regular expression about where the problem was
2037 =item Internal inconsistency in tracking vforks
2039 (S) A warning peculiar to VMS. Perl keeps track of the number of times
2040 you've called C<fork> and C<exec>, to determine whether the current call
2041 to C<exec> should affect the current script or a subprocess (see
2042 L<perlvms/"exec LIST">). Somehow, this count has become scrambled, so
2043 Perl is making a guess and treating this C<exec> as a request to
2044 terminate the Perl script and execute the specified command.
2046 =item Internal urp in regex; marked by <-- HERE in m/%s/
2048 (P) Something went badly awry in the regular expression parser. The
2049 <-- HERE shows in the regular expression about where the problem was
2052 =item %s (...) interpreted as function
2054 (W syntax) You've run afoul of the rule that says that any list operator
2055 followed by parentheses turns into a function, with all the list
2056 operators arguments found inside the parentheses. See
2057 L<perlop/Terms and List Operators (Leftward)>.
2059 =item Invalid %s attribute: %s
2061 The indicated attribute for a subroutine or variable was not recognized
2062 by Perl or by a user-supplied handler. See L<attributes>.
2064 =item Invalid %s attributes: %s
2066 The indicated attributes for a subroutine or variable were not
2067 recognized by Perl or by a user-supplied handler. See L<attributes>.
2069 =item Invalid conversion in %s: "%s"
2071 (W printf) Perl does not understand the given format conversion. See
2072 L<perlfunc/sprintf>.
2074 =item Invalid escape in the specified encoding in regex; marked by <-- HERE in m/%s/
2076 (W regexp) The numeric escape (for example C<\xHH>) of value < 256
2077 didn't correspond to a single character through the conversion
2078 from the encoding specified by the encoding pragma.
2079 The escape was replaced with REPLACEMENT CHARACTER (U+FFFD) instead.
2080 The <-- HERE shows in the regular expression about where the
2081 escape was discovered.
2083 =item Invalid [] range "%s" in regex; marked by <-- HERE in m/%s/
2085 (F) The range specified in a character class had a minimum character
2086 greater than the maximum character. One possibility is that you forgot the
2087 C<{}> from your ending C<\x{}> - C<\x> without the curly braces can go only
2088 up to C<ff>. The <-- HERE shows in the regular expression about where the
2089 problem was discovered. See L<perlre>.
2091 =item Invalid range "%s" in transliteration operator
2093 (F) The range specified in the tr/// or y/// operator had a minimum
2094 character greater than the maximum character. See L<perlop>.
2096 =item Invalid separator character %s in attribute list
2098 (F) Something other than a colon or whitespace was seen between the
2099 elements of an attribute list. If the previous attribute had a
2100 parenthesised parameter list, perhaps that list was terminated too soon.
2103 =item Invalid separator character %s in PerlIO layer specification %s
2105 (W layer) When pushing layers onto the Perl I/O system, something other than a
2106 colon or whitespace was seen between the elements of a layer list.
2107 If the previous attribute had a parenthesised parameter list, perhaps that
2108 list was terminated too soon.
2110 =item Invalid type '%s' in %s
2112 (F) The given character is not a valid pack or unpack type.
2113 See L<perlfunc/pack>.
2114 (W) The given character is not a valid pack or unpack type but used to be
2117 =item Invalid version format (multiple underscores)
2119 (F) Versions may contain at most a single underscore, which signals
2120 that the version is a beta release. See L<version> for the allowed
2123 =item Invalid version format (underscores before decimal)
2125 (F) Versions may not contain decimals after the optional underscore.
2126 See L<version> for the allowed version formats.
2128 =item ioctl is not implemented
2130 (F) Your machine apparently doesn't implement ioctl(), which is pretty
2131 strange for a machine that supports C.
2133 =item ioctl() on unopened %s
2135 (W unopened) You tried ioctl() on a filehandle that was never opened.
2136 Check you control flow and number of arguments.
2138 =item IO layers (like "%s") unavailable
2140 (F) Your Perl has not been configured to have PerlIO, and therefore
2141 you cannot use IO layers. To have PerlIO Perl must be configured
2144 =item IO::Socket::atmark not implemented on this architecture
2146 (F) Your machine doesn't implement the sockatmark() functionality,
2147 neither as a system call or an ioctl call (SIOCATMARK).
2149 =item $* is no longer supported
2151 (D deprecated) The special variable C<$*>, deprecated in older perls, has
2152 been removed as of 5.9.0 and is no longer supported. You should use the
2153 C<//m> and C<//s> regexp modifiers instead.
2155 =item $# is no longer supported
2157 (D deprecated) The special variable C<$#>, deprecated in older perls, has
2158 been removed as of 5.9.3 and is no longer supported. You should use the
2159 printf/sprintf functions instead.
2161 =item `%s' is not a code reference
2163 (W overload) The second (fourth, sixth, ...) argument of overload::constant
2164 needs to be a code reference. Either an anonymous subroutine, or a reference
2167 =item `%s' is not an overloadable type
2169 (W overload) You tried to overload a constant type the overload package is
2172 =item junk on end of regexp
2174 (P) The regular expression parser is confused.
2176 =item Label not found for "last %s"
2178 (F) You named a loop to break out of, but you're not currently in a loop
2179 of that name, not even if you count where you were called from. See
2182 =item Label not found for "next %s"
2184 (F) You named a loop to continue, but you're not currently in a loop of
2185 that name, not even if you count where you were called from. See
2188 =item Label not found for "redo %s"
2190 (F) You named a loop to restart, but you're not currently in a loop of
2191 that name, not even if you count where you were called from. See
2194 =item leaving effective %s failed
2196 (F) While under the C<use filetest> pragma, switching the real and
2197 effective uids or gids failed.
2199 =item length/code after end of string in unpack
2201 (F) While unpacking, the string buffer was already used up when an unpack
2202 length/code combination tried to obtain more data. This results in
2203 an undefined value for the length. See L<perlfunc/pack>.
2205 =item listen() on closed socket %s
2207 (W closed) You tried to do a listen on a closed socket. Did you forget
2208 to check the return value of your socket() call? See
2211 =item Lookbehind longer than %d not implemented in regex; marked by <-- HERE in m/%s/
2213 (F) There is currently a limit on the length of string which lookbehind can
2214 handle. This restriction may be eased in a future release. The <-- HERE
2215 shows in the regular expression about where the problem was discovered.
2217 =item lstat() on filehandle %s
2219 (W io) You tried to do an lstat on a filehandle. What did you mean
2220 by that? lstat() makes sense only on filenames. (Perl did a fstat()
2221 instead on the filehandle.)
2223 =item Lvalue subs returning %s not implemented yet
2225 (F) Due to limitations in the current implementation, array and hash
2226 values cannot be returned in subroutines used in lvalue context. See
2227 L<perlsub/"Lvalue subroutines">.
2229 =item Malformed integer in [] in pack
2231 (F) Between the brackets enclosing a numeric repeat count only digits
2232 are permitted. See L<perlfunc/pack>.
2234 =item Malformed integer in [] in unpack
2236 (F) Between the brackets enclosing a numeric repeat count only digits
2237 are permitted. See L<perlfunc/pack>.
2239 =item Malformed PERLLIB_PREFIX
2241 (F) An error peculiar to OS/2. PERLLIB_PREFIX should be of the form
2248 with nonempty prefix1 and prefix2. If C<prefix1> is indeed a prefix of
2249 a builtin library search path, prefix2 is substituted. The error may
2250 appear if components are not found, or are too long. See
2251 "PERLLIB_PREFIX" in L<perlos2>.
2253 =item Malformed prototype for %s: %s
2255 (F) You tried to use a function with a malformed prototype. The
2256 syntax of function prototypes is given a brief compile-time check for
2257 obvious errors like invalid characters. A more rigorous check is run
2258 when the function is called.
2260 =item Malformed UTF-8 character (%s)
2262 (S utf8) (F) Perl detected something that didn't comply with UTF-8
2265 One possible cause is that you read in data that you thought to be in
2266 UTF-8 but it wasn't (it was for example legacy 8-bit data). Another
2267 possibility is careless use of utf8::upgrade().
2269 =item Malformed UTF-16 surrogate
2271 Perl thought it was reading UTF-16 encoded character data but while
2272 doing it Perl met a malformed Unicode surrogate.
2274 =item Malformed UTF-8 string in pack
2276 (F) You tried to pack something that didn't comply with UTF-8 encoding
2277 rules and perl was unable to guess how to make more progress.
2279 =item Malformed UTF-8 string in unpack
2281 (F) You tried to unpack something that didn't comply with UTF-8 encoding
2282 rules and perl was unable to guess how to make more progress.
2284 =item Malformed UTF-8 string in '%c' format in unpack
2286 (F) You tried to unpack something that didn't comply with UTF-8 encoding
2287 rules and perl was unable to guess how to make more progress.
2289 =item %s matches null string many times in regex; marked by <-- HERE in m/%s/
2291 (W regexp) The pattern you've specified would be an infinite loop if the
2292 regular expression engine didn't specifically check for that. The <-- HERE
2293 shows in the regular expression about where the problem was discovered.
2296 =item "%s" may clash with future reserved word
2298 (W) This warning may be due to running a perl5 script through a perl4
2299 interpreter, especially if the word that is being warned about is
2302 =item % may not be used in pack
2304 (F) You can't pack a string by supplying a checksum, because the
2305 checksumming process loses information, and you can't go the other way.
2306 See L<perlfunc/unpack>.
2308 =item Method for operation %s not found in package %s during blessing
2310 (F) An attempt was made to specify an entry in an overloading table that
2311 doesn't resolve to a valid subroutine. See L<overload>.
2313 =item Method %s not permitted
2317 =item Might be a runaway multi-line %s string starting on line %d
2319 (S) An advisory indicating that the previous error may have been caused
2320 by a missing delimiter on a string or pattern, because it eventually
2321 ended earlier on the current line.
2323 =item Misplaced _ in number
2325 (W syntax) An underscore (underbar) in a numeric constant did not
2326 separate two digits.
2328 =item Missing argument to -%c
2330 (F) The argument to the indicated command line switch must follow
2331 immediately after the switch, without intervening spaces.
2333 =item Missing %sbrace%s on \N{}
2335 (F) Wrong syntax of character name literal C<\N{charname}> within
2336 double-quotish context.
2338 =item Missing comma after first argument to %s function
2340 (F) While certain functions allow you to specify a filehandle or an
2341 "indirect object" before the argument list, this ain't one of them.
2343 =item Missing command in piped open
2345 (W pipe) You used the C<open(FH, "| command")> or
2346 C<open(FH, "command |")> construction, but the command was missing or
2349 =item Missing control char name in \c
2351 (F) A double-quoted string ended with "\c", without the required control
2354 =item Missing name in "my sub"
2356 (F) The reserved syntax for lexically scoped subroutines requires that
2357 they have a name with which they can be found.
2359 =item Missing $ on loop variable
2361 (F) Apparently you've been programming in B<csh> too much. Variables
2362 are always mentioned with the $ in Perl, unlike in the shells, where it
2363 can vary from one line to the next.
2365 =item (Missing operator before %s?)
2367 (S syntax) This is an educated guess made in conjunction with the message
2368 "%s found where operator expected". Often the missing operator is a comma.
2370 =item Missing right brace on %s
2372 (F) Missing right brace in C<\p{...}> or C<\P{...}>.
2374 =item Missing right curly or square bracket
2376 (F) The lexer counted more opening curly or square brackets than closing
2377 ones. As a general rule, you'll find it's missing near the place you
2380 =item (Missing semicolon on previous line?)
2382 (S syntax) This is an educated guess made in conjunction with the message
2383 "%s found where operator expected". Don't automatically put a semicolon on
2384 the previous line just because you saw this message.
2386 =item Modification of a read-only value attempted
2388 (F) You tried, directly or indirectly, to change the value of a
2389 constant. You didn't, of course, try "2 = 1", because the compiler
2390 catches that. But an easy way to do the same thing is:
2392 sub mod { $_[0] = 1 }
2395 Another way is to assign to a substr() that's off the end of the string.
2397 Yet another way is to assign to a C<foreach> loop I<VAR> when I<VAR>
2398 is aliased to a constant in the look I<LIST>:
2401 foreach my $n ($x, 2) {
2402 $n *= 2; # modifies the $x, but fails on attempt to modify the 2
2405 =item Modification of non-creatable array value attempted, %s
2407 (F) You tried to make an array value spring into existence, and the
2408 subscript was probably negative, even counting from end of the array
2411 =item Modification of non-creatable hash value attempted, %s
2413 (P) You tried to make a hash value spring into existence, and it
2414 couldn't be created for some peculiar reason.
2416 =item Module name must be constant
2418 (F) Only a bare module name is allowed as the first argument to a "use".
2420 =item Module name required with -%c option
2422 (F) The C<-M> or C<-m> options say that Perl should load some module, but
2423 you omitted the name of the module. Consult L<perlrun> for full details
2424 about C<-M> and C<-m>.
2426 =item More than one argument to open
2428 (F) The C<open> function has been asked to open multiple files. This
2429 can happen if you are trying to open a pipe to a command that takes a
2430 list of arguments, but have forgotten to specify a piped open mode.
2431 See L<perlfunc/open> for details.
2433 =item msg%s not implemented
2435 (F) You don't have System V message IPC on your system.
2437 =item Multidimensional syntax %s not supported
2439 (W syntax) Multidimensional arrays aren't written like C<$foo[1,2,3]>.
2440 They're written like C<$foo[1][2][3]>, as in C.
2442 =item '/' must follow a numeric type in unpack
2444 (F) You had an unpack template that contained a '/', but this did not
2445 follow some unpack specification producing a numeric value.
2446 See L<perlfunc/pack>.
2448 =item "my sub" not yet implemented
2450 (F) Lexically scoped subroutines are not yet implemented. Don't try
2453 =item "my" variable %s can't be in a package
2455 (F) Lexically scoped variables aren't in a package, so it doesn't make
2456 sense to try to declare one with a package qualifier on the front. Use
2457 local() if you want to localize a package variable.
2459 =item Name "%s::%s" used only once: possible typo
2461 (W once) Typographical errors often show up as unique variable names.
2462 If you had a good reason for having a unique name, then just mention it
2463 again somehow to suppress the message. The C<our> declaration is
2464 provided for this purpose.
2466 NOTE: This warning detects symbols that have been used only once so $c, @c,
2467 %c, *c, &c, sub c{}, c(), and c (the filehandle or format) are considered
2468 the same; if a program uses $c only once but also uses any of the others it
2469 will not trigger this warning.
2471 =item Negative '/' count in unpack
2473 (F) The length count obtained from a length/code unpack operation was
2474 negative. See L<perlfunc/pack>.
2476 =item Negative length
2478 (F) You tried to do a read/write/send/recv operation with a buffer
2479 length that is less than 0. This is difficult to imagine.
2481 =item Negative offset to vec in lvalue context
2483 (F) When C<vec> is called in an lvalue context, the second argument must be
2484 greater than or equal to zero.
2486 =item Nested quantifiers in regex; marked by <-- HERE in m/%s/
2488 (F) You can't quantify a quantifier without intervening parentheses. So
2489 things like ** or +* or ?* are illegal. The <-- HERE shows in the regular
2490 expression about where the problem was discovered.
2492 Note that the minimal matching quantifiers, C<*?>, C<+?>, and
2493 C<??> appear to be nested quantifiers, but aren't. See L<perlre>.
2495 =item %s never introduced
2497 (S internal) The symbol in question was declared but somehow went out of
2498 scope before it could possibly have been used.
2500 =item No %s allowed while running setuid
2502 (F) Certain operations are deemed to be too insecure for a setuid or
2503 setgid script to even be allowed to attempt. Generally speaking there
2504 will be another way to do what you want that is, if not secure, at least
2505 securable. See L<perlsec>.
2507 =item No comma allowed after %s
2509 (F) A list operator that has a filehandle or "indirect object" is not
2510 allowed to have a comma between that and the following arguments.
2511 Otherwise it'd be just another one of the arguments.
2513 One possible cause for this is that you expected to have imported a
2514 constant to your name space with B<use> or B<import> while no such
2515 importing took place, it may for example be that your operating system
2516 does not support that particular constant. Hopefully you did use an
2517 explicit import list for the constants you expect to see, please see
2518 L<perlfunc/use> and L<perlfunc/import>. While an explicit import list
2519 would probably have caught this error earlier it naturally does not
2520 remedy the fact that your operating system still does not support that
2521 constant. Maybe you have a typo in the constants of the symbol import
2522 list of B<use> or B<import> or in the constant name at the line where
2523 this error was triggered?
2525 =item No command into which to pipe on command line
2527 (F) An error peculiar to VMS. Perl handles its own command line
2528 redirection, and found a '|' at the end of the command line, so it
2529 doesn't know where you want to pipe the output from this command.
2531 =item No DB::DB routine defined
2533 (F) The currently executing code was compiled with the B<-d> switch, but
2534 for some reason the current debugger (e.g. F<perl5db.pl> or a C<Devel::>
2535 module) didn't define a routine to be called at the beginning of each
2538 =item No dbm on this machine
2540 (P) This is counted as an internal error, because every machine should
2541 supply dbm nowadays, because Perl comes with SDBM. See L<SDBM_File>.
2543 =item No DB::sub routine defined
2545 (F) The currently executing code was compiled with the B<-d> switch, but
2546 for some reason the current debugger (e.g. F<perl5db.pl> or a C<Devel::>
2547 module) didn't define a C<DB::sub> routine to be called at the beginning
2548 of each ordinary subroutine call.
2550 =item No B<-e> allowed in setuid scripts
2552 (F) A setuid script can't be specified by the user.
2554 =item No error file after 2> or 2>> on command line
2556 (F) An error peculiar to VMS. Perl handles its own command line
2557 redirection, and found a '2>' or a '2>>' on the command line, but can't
2558 find the name of the file to which to write data destined for stderr.
2560 =item No group ending character '%c' found in template
2562 (F) A pack or unpack template has an opening '(' or '[' without its
2563 matching counterpart. See L<perlfunc/pack>.
2565 =item No input file after < on command line
2567 (F) An error peculiar to VMS. Perl handles its own command line
2568 redirection, and found a '<' on the command line, but can't find the
2569 name of the file from which to read data for stdin.
2573 (F) The setuid emulator requires that scripts have a well-formed #! line
2574 even on machines that don't support the #! construct.
2576 =item "no" not allowed in expression
2578 (F) The "no" keyword is recognized and executed at compile time, and
2579 returns no useful value. See L<perlmod>.
2581 =item No output file after > on command line
2583 (F) An error peculiar to VMS. Perl handles its own command line
2584 redirection, and found a lone '>' at the end of the command line, so it
2585 doesn't know where you wanted to redirect stdout.
2587 =item No output file after > or >> on command line
2589 (F) An error peculiar to VMS. Perl handles its own command line
2590 redirection, and found a '>' or a '>>' on the command line, but can't
2591 find the name of the file to which to write data destined for stdout.
2593 =item No package name allowed for variable %s in "our"
2595 (F) Fully qualified variable names are not allowed in "our"
2596 declarations, because that doesn't make much sense under existing
2597 semantics. Such syntax is reserved for future extensions.
2599 =item No Perl script found in input
2601 (F) You called C<perl -x>, but no line was found in the file beginning
2602 with #! and containing the word "perl".
2604 =item No setregid available
2606 (F) Configure didn't find anything resembling the setregid() call for
2609 =item No setreuid available
2611 (F) Configure didn't find anything resembling the setreuid() call for
2614 =item No %s specified for -%c
2616 (F) The indicated command line switch needs a mandatory argument, but
2617 you haven't specified one.
2619 =item No such class field "%s" in variable %s of type %s
2621 (F) You tried to access a key from a hash through the indicated typed variable
2622 but that key is not allowed by the package of the same type. The indicated
2623 package has restricted the set of allowed keys using the L<fields> pragma.
2625 =item No such class %s
2627 (F) You provided a class qualifier in a "my" or "our" declaration, but
2628 this class doesn't exist at this point in your program.
2630 =item No such pipe open
2632 (P) An error peculiar to VMS. The internal routine my_pclose() tried to
2633 close a pipe which hadn't been opened. This should have been caught
2634 earlier as an attempt to close an unopened filehandle.
2636 =item No such signal: SIG%s
2638 (W signal) You specified a signal name as a subscript to %SIG that was
2639 not recognized. Say C<kill -l> in your shell to see the valid signal
2640 names on your system.
2642 =item Not a CODE reference
2644 (F) Perl was trying to evaluate a reference to a code value (that is, a
2645 subroutine), but found a reference to something else instead. You can
2646 use the ref() function to find out what kind of ref it really was. See
2649 =item Not a format reference
2651 (F) I'm not sure how you managed to generate a reference to an anonymous
2652 format, but this indicates you did, and that it didn't exist.
2654 =item Not a GLOB reference
2656 (F) Perl was trying to evaluate a reference to a "typeglob" (that is, a
2657 symbol table entry that looks like C<*foo>), but found a reference to
2658 something else instead. You can use the ref() function to find out what
2659 kind of ref it really was. See L<perlref>.
2661 =item Not a HASH reference
2663 (F) Perl was trying to evaluate a reference to a hash value, but found a
2664 reference to something else instead. You can use the ref() function to
2665 find out what kind of ref it really was. See L<perlref>.
2667 =item Not an ARRAY reference
2669 (F) Perl was trying to evaluate a reference to an array value, but found
2670 a reference to something else instead. You can use the ref() function
2671 to find out what kind of ref it really was. See L<perlref>.
2673 =item Not a perl script
2675 (F) The setuid emulator requires that scripts have a well-formed #! line
2676 even on machines that don't support the #! construct. The line must
2679 =item Not a SCALAR reference
2681 (F) Perl was trying to evaluate a reference to a scalar value, but found
2682 a reference to something else instead. You can use the ref() function
2683 to find out what kind of ref it really was. See L<perlref>.
2685 =item Not a subroutine reference
2687 (F) Perl was trying to evaluate a reference to a code value (that is, a
2688 subroutine), but found a reference to something else instead. You can
2689 use the ref() function to find out what kind of ref it really was. See
2692 =item Not a subroutine reference in overload table
2694 (F) An attempt was made to specify an entry in an overloading table that
2695 doesn't somehow point to a valid subroutine. See L<overload>.
2697 =item Not enough arguments for %s
2699 (F) The function requires more arguments than you specified.
2701 =item Not enough format arguments
2703 (W syntax) A format specified more picture fields than the next line
2704 supplied. See L<perlform>.
2708 (A) You've accidentally run your script through the Bourne shell instead
2709 of Perl. Check the #! line, or manually feed your script into Perl
2712 =item no UTC offset information; assuming local time is UTC
2714 (S) A warning peculiar to VMS. Perl was unable to find the local
2715 timezone offset, so it's assuming that local system time is equivalent
2716 to UTC. If it's not, define the logical name
2717 F<SYS$TIMEZONE_DIFFERENTIAL> to translate to the number of seconds which
2718 need to be added to UTC to get local time.
2720 =item Non-string passed as bitmask
2722 (W misc) A number has been passed as a bitmask argument to select().
2723 Use the vec() function to construct the file descriptor bitmasks for
2724 select. See L<perlfunc/select>
2726 =item Null filename used
2728 (F) You can't require the null filename, especially because on many
2729 machines that means the current directory! See L<perlfunc/require>.
2731 =item NULL OP IN RUN
2733 (P debugging) Some internal routine called run() with a null opcode
2736 =item Null picture in formline
2738 (F) The first argument to formline must be a valid format picture
2739 specification. It was found to be empty, which probably means you
2740 supplied it an uninitialized value. See L<perlform>.
2744 (P) An attempt was made to realloc NULL.
2746 =item NULL regexp argument
2748 (P) The internal pattern matching routines blew it big time.
2750 =item NULL regexp parameter
2752 (P) The internal pattern matching routines are out of their gourd.
2754 =item Number too long
2756 (F) Perl limits the representation of decimal numbers in programs to
2757 about 250 characters. You've exceeded that length. Future
2758 versions of Perl are likely to eliminate this arbitrary limitation. In
2759 the meantime, try using scientific notation (e.g. "1e6" instead of
2762 =item Octal number in vector unsupported
2764 (F) Numbers with a leading C<0> are not currently allowed in vectors.
2765 The octal number interpretation of such numbers may be supported in a
2768 =item Octal number > 037777777777 non-portable
2770 (W portable) The octal number you specified is larger than 2**32-1
2771 (4294967295) and therefore non-portable between systems. See
2772 L<perlport> for more on portability concerns.
2774 See also L<perlport> for writing portable code.
2776 =item Odd number of arguments for overload::constant
2778 (W overload) The call to overload::constant contained an odd number of
2779 arguments. The arguments should come in pairs.
2781 =item Odd number of elements in anonymous hash
2783 (W misc) You specified an odd number of elements to initialize a hash,
2784 which is odd, because hashes come in key/value pairs.
2786 =item Odd number of elements in hash assignment
2788 (W misc) You specified an odd number of elements to initialize a hash,
2789 which is odd, because hashes come in key/value pairs.
2791 =item Offset outside string
2793 (F, W layer) You tried to do a read/write/send/recv/seek operation
2794 with an offset pointing outside the buffer. This is difficult to
2795 imagine. The sole exceptions to this are that zero padding will
2796 take place when going past the end of the string when either
2797 C<sysread()>ing a file, or when seeking past the end of a scalar opened
2798 for I/O (in anticipation of future reads and to imitate the behaviour
2801 =item %s() on unopened %s
2803 (W unopened) An I/O operation was attempted on a filehandle that was
2804 never initialized. You need to do an open(), a sysopen(), or a socket()
2805 call, or call a constructor from the FileHandle package.
2807 =item -%s on unopened filehandle %s
2809 (W unopened) You tried to invoke a file test operator on a filehandle
2810 that isn't open. Check your control flow. See also L<perlfunc/-X>.
2814 (S internal) An internal warning that the grammar is screwed up.
2818 (S internal) An internal warning that the grammar is screwed up.
2820 =item Operation "%s": no method found, %s
2822 (F) An attempt was made to perform an overloaded operation for which no
2823 handler was defined. While some handlers can be autogenerated in terms
2824 of other handlers, there is no default handler for any operation, unless
2825 C<fallback> overloading key is specified to be true. See L<overload>.
2827 =item Operator or semicolon missing before %s
2829 (S ambiguous) You used a variable or subroutine call where the parser
2830 was expecting an operator. The parser has assumed you really meant to
2831 use an operator, but this is highly likely to be incorrect. For
2832 example, if you say "*foo *foo" it will be interpreted as if you said
2835 =item "our" variable %s redeclared
2837 (W misc) You seem to have already declared the same global once before
2838 in the current lexical scope.
2840 =item Out of memory!
2842 (X) The malloc() function returned 0, indicating there was insufficient
2843 remaining memory (or virtual memory) to satisfy the request. Perl has
2844 no option but to exit immediately.
2846 At least in Unix you may be able to get past this by increasing your
2847 process datasize limits: in csh/tcsh use C<limit> and
2848 C<limit datasize n> (where C<n> is the number of kilobytes) to check
2849 the current limits and change them, and in ksh/bash/zsh use C<ulimit -a>
2850 and C<ulimit -d n>, respectively.
2852 =item Out of memory during %s extend
2854 (X) An attempt was made to extend an array, a list, or a string beyond
2855 the largest possible memory allocation.
2857 =item Out of memory during "large" request for %s
2859 (F) The malloc() function returned 0, indicating there was insufficient
2860 remaining memory (or virtual memory) to satisfy the request. However,
2861 the request was judged large enough (compile-time default is 64K), so a
2862 possibility to shut down by trapping this error is granted.
2864 =item Out of memory during request for %s
2866 (X|F) The malloc() function returned 0, indicating there was
2867 insufficient remaining memory (or virtual memory) to satisfy the
2870 The request was judged to be small, so the possibility to trap it
2871 depends on the way perl was compiled. By default it is not trappable.
2872 However, if compiled for this, Perl may use the contents of C<$^M> as an
2873 emergency pool after die()ing with this message. In this case the error
2874 is trappable I<once>, and the error message will include the line and file
2875 where the failed request happened.
2877 =item Out of memory during ridiculously large request
2879 (F) You can't allocate more than 2^31+"small amount" bytes. This error
2880 is most likely to be caused by a typo in the Perl program. e.g.,
2881 C<$arr[time]> instead of C<$arr[$time]>.
2883 =item Out of memory for yacc stack
2885 (F) The yacc parser wanted to grow its stack so it could continue
2886 parsing, but realloc() wouldn't give it more memory, virtual or
2889 =item '.' outside of string in pack
2891 (F) The argument to a '.' in your template tried to move the working
2892 position to before the start of the packed string being built.
2894 =item '@' outside of string in unpack
2896 (F) You had a template that specified an absolute position outside
2897 the string being unpacked. See L<perlfunc/pack>.
2899 =item '@' outside of string with malformed UTF-8 in unpack
2901 (F) You had a template that specified an absolute position outside
2902 the string being unpacked. The string being unpacked was also invalid
2903 UTF-8. See L<perlfunc/pack>.
2905 =item %s package attribute may clash with future reserved word: %s
2907 (W reserved) A lowercase attribute name was used that had a
2908 package-specific handler. That name might have a meaning to Perl itself
2909 some day, even though it doesn't yet. Perhaps you should use a
2910 mixed-case attribute name, instead. See L<attributes>.
2912 =item pack/unpack repeat count overflow
2914 (F) You can't specify a repeat count so large that it overflows your
2915 signed integers. See L<perlfunc/pack>.
2919 (W io) A single call to write() produced more lines than can fit on a
2920 page. See L<perlform>.
2924 (P) An internal error.
2926 =item panic: attempt to call %s in %s
2928 (P) One of the file test operators entered a code branch that calls
2929 an ACL related-function, but that function is not available on this
2930 platform. Earlier checks mean that it should not be possible to
2931 enter this branch on this platform.
2933 =item panic: ck_grep
2935 (P) Failed an internal consistency check trying to compile a grep.
2937 =item panic: ck_split
2939 (P) Failed an internal consistency check trying to compile a split.
2941 =item panic: corrupt saved stack index
2943 (P) The savestack was requested to restore more localized values than
2944 there are in the savestack.
2946 =item panic: del_backref
2948 (P) Failed an internal consistency check while trying to reset a weak
2951 =item panic: Devel::DProf inconsistent subroutine return
2953 (P) Devel::DProf called a subroutine that exited using goto(LABEL),
2954 last(LABEL) or next(LABEL). Leaving that way a subroutine called from
2955 an XSUB will lead very probably to a crash of the interpreter. This is
2956 a bug that will hopefully one day get fixed.
2960 (P) We popped the context stack to an eval context, and then discovered
2961 it wasn't an eval context.
2963 =item panic: do_subst
2965 (P) The internal pp_subst() routine was called with invalid operational
2968 =item panic: do_trans_%s
2970 (P) The internal do_trans routines were called with invalid operational
2973 =item panic: fold_constants JMPENV_PUSH returned %d
2975 (P) While attempting folding constants an exception other than an C<eval>
2980 (P) The library function frexp() failed, making printf("%f") impossible.
2984 (P) We popped the context stack to a context with the specified label,
2985 and then discovered it wasn't a context we know how to do a goto in.
2987 =item panic: hfreeentries failed to free hash
2989 (P) The internal routine used to clear a hashes entries tried repeatedly,
2990 but each time something added more entries to the hash. Most likely the hash
2991 contains an object with a reference back to the hash and a destructor that
2992 adds a new object to the hash.
2994 =item panic: INTERPCASEMOD
2996 (P) The lexer got into a bad state at a case modifier.
2998 =item panic: INTERPCONCAT
3000 (P) The lexer got into a bad state parsing a string with brackets.
3002 =item panic: kid popen errno read
3004 (F) forked child returned an incomprehensible message about its errno.
3008 (P) We popped the context stack to a block context, and then discovered
3009 it wasn't a block context.
3011 =item panic: leave_scope clearsv
3013 (P) A writable lexical variable became read-only somehow within the
3016 =item panic: leave_scope inconsistency
3018 (P) The savestack probably got out of sync. At least, there was an
3019 invalid enum on the top of it.
3021 =item panic: magic_killbackrefs
3023 (P) Failed an internal consistency check while trying to reset all weak
3024 references to an object.
3028 (P) Something requested a negative number of bytes of malloc.
3030 =item panic: memory wrap
3032 (P) Something tried to allocate more memory than possible.
3034 =item panic: pad_alloc
3036 (P) The compiler got confused about which scratch pad it was allocating
3037 and freeing temporaries and lexicals from.
3039 =item panic: pad_free curpad
3041 (P) The compiler got confused about which scratch pad it was allocating
3042 and freeing temporaries and lexicals from.
3044 =item panic: pad_free po
3046 (P) An invalid scratch pad offset was detected internally.
3048 =item panic: pad_reset curpad
3050 (P) The compiler got confused about which scratch pad it was allocating
3051 and freeing temporaries and lexicals from.
3053 =item panic: pad_sv po
3055 (P) An invalid scratch pad offset was detected internally.
3057 =item panic: pad_swipe curpad
3059 (P) The compiler got confused about which scratch pad it was allocating
3060 and freeing temporaries and lexicals from.
3062 =item panic: pad_swipe po
3064 (P) An invalid scratch pad offset was detected internally.
3066 =item panic: pp_iter
3068 (P) The foreach iterator got called in a non-loop context frame.
3070 =item panic: pp_match%s
3072 (P) The internal pp_match() routine was called with invalid operational
3075 =item panic: pp_split
3077 (P) Something terrible went wrong in setting up for the split.
3079 =item panic: realloc
3081 (P) Something requested a negative number of bytes of realloc.
3083 =item panic: restartop
3085 (P) Some internal routine requested a goto (or something like it), and
3086 didn't supply the destination.
3090 (P) We popped the context stack to a subroutine or eval context, and
3091 then discovered it wasn't a subroutine or eval context.
3093 =item panic: scan_num
3095 (P) scan_num() got called on something that wasn't a number.
3097 =item panic: sv_insert
3099 (P) The sv_insert() routine was told to remove more string than there
3102 =item panic: top_env
3104 (P) The compiler attempted to do a goto, or something weird like that.
3106 =item panic: unimplemented op %s (#%d) called
3108 (P) The compiler is screwed up and attempted to use an op that isn't permitted
3111 =item panic: utf16_to_utf8: odd bytelen
3113 (P) Something tried to call utf16_to_utf8 with an odd (as opposed
3114 to even) byte length.
3118 (P) The lexer got into a bad state while processing a case modifier.
3120 =item Pattern subroutine nesting without pos change exceeded limit in regex; marked by <-- HERE in m/%s/
3122 (F) You used a pattern that uses too many nested subpattern calls without
3123 consuming any text. Restructure the pattern so text is consumed before the
3124 nesting limit is exceeded.
3126 The <-- HERE shows in the regular expression about where the problem was
3129 =item Parentheses missing around "%s" list
3131 (W parenthesis) You said something like
3137 my ($foo, $bar) = @_;
3139 Remember that "my", "our", and "local" bind tighter than comma.
3141 =item C<-p> destination: %s
3143 (F) An error occurred during the implicit output invoked by the C<-p>
3144 command-line switch. (This output goes to STDOUT unless you've
3145 redirected it with select().)
3147 =item (perhaps you forgot to load "%s"?)
3149 (F) This is an educated guess made in conjunction with the message
3150 "Can't locate object method \"%s\" via package \"%s\"". It often means
3151 that a method requires a package that has not been loaded.
3153 =item Perl_my_%s() not available
3155 (F) Your platform has very uncommon byte-order and integer size,
3156 so it was not possible to set up some or all fixed-width byte-order
3157 conversion functions. This is only a problem when you're using the
3158 '<' or '>' modifiers in (un)pack templates. See L<perlfunc/pack>.
3160 =item Perl %s required--this is only version %s, stopped
3162 (F) The module in question uses features of a version of Perl more
3163 recent than the currently running version. How long has it been since
3164 you upgraded, anyway? See L<perlfunc/require>.
3166 =item PERL_SH_DIR too long
3168 (F) An error peculiar to OS/2. PERL_SH_DIR is the directory to find the
3169 C<sh>-shell in. See "PERL_SH_DIR" in L<perlos2>.
3171 =item PERL_SIGNALS illegal: "%s"
3173 See L<perlrun/PERL_SIGNALS> for legal values.
3175 =item perl: warning: Setting locale failed.
3177 (S) The whole warning message will look something like:
3179 perl: warning: Setting locale failed.
3180 perl: warning: Please check that your locale settings:
3183 are supported and installed on your system.
3184 perl: warning: Falling back to the standard locale ("C").
3186 Exactly what were the failed locale settings varies. In the above the
3187 settings were that the LC_ALL was "En_US" and the LANG had no value.
3188 This error means that Perl detected that you and/or your operating
3189 system supplier and/or system administrator have set up the so-called
3190 locale system but Perl could not use those settings. This was not
3191 dead serious, fortunately: there is a "default locale" called "C" that
3192 Perl can and will use, the script will be run. Before you really fix
3193 the problem, however, you will get the same error message each time
3194 you run Perl. How to really fix the problem can be found in
3195 L<perllocale> section B<LOCALE PROBLEMS>.
3197 =item Permission denied
3199 (F) The setuid emulator in suidperl decided you were up to no good.
3201 =item pid %x not a child
3203 (W exec) A warning peculiar to VMS. Waitpid() was asked to wait for a
3204 process which isn't a subprocess of the current process. While this is
3205 fine from VMS' perspective, it's probably not what you intended.
3207 =item 'P' must have an explicit size in unpack
3209 (F) The unpack format P must have an explicit size, not "*".
3211 =item B<-P> not allowed for setuid/setgid script
3213 (F) The script would have to be opened by the C preprocessor by name,
3214 which provides a race condition that breaks security.
3216 =item POSIX class [:%s:] unknown in regex; marked by <-- HERE in m/%s/
3218 (F) The class in the character class [: :] syntax is unknown. The <-- HERE
3219 shows in the regular expression about where the problem was discovered.
3220 Note that the POSIX character classes do B<not> have the C<is> prefix
3221 the corresponding C interfaces have: in other words, it's C<[[:print:]]>,
3222 not C<isprint>. See L<perlre>.
3224 =item POSIX getpgrp can't take an argument
3226 (F) Your system has POSIX getpgrp(), which takes no argument, unlike
3227 the BSD version, which takes a pid.
3229 =item POSIX syntax [%s] belongs inside character classes in regex; marked by <-- HERE in m/%s/
3231 (W regexp) The character class constructs [: :], [= =], and [. .] go
3232 I<inside> character classes, the [] are part of the construct, for example:
3233 /[012[:alpha:]345]/. Note that [= =] and [. .] are not currently
3234 implemented; they are simply placeholders for future extensions and will
3235 cause fatal errors. The <-- HERE shows in the regular expression about
3236 where the problem was discovered. See L<perlre>.
3238 =item POSIX syntax [. .] is reserved for future extensions in regex; marked by <-- HERE in m/%s/
3240 (F regexp) Within regular expression character classes ([]) the syntax
3241 beginning with "[." and ending with ".]" is reserved for future extensions.
3242 If you need to represent those character sequences inside a regular
3243 expression character class, just quote the square brackets with the
3244 backslash: "\[." and ".\]". The <-- HERE shows in the regular expression
3245 about where the problem was discovered. See L<perlre>.
3247 =item POSIX syntax [= =] is reserved for future extensions in regex; marked by <-- HERE in m/%s/
3249 (F) Within regular expression character classes ([]) the syntax beginning
3250 with "[=" and ending with "=]" is reserved for future extensions. If you
3251 need to represent those character sequences inside a regular expression
3252 character class, just quote the square brackets with the backslash: "\[="
3253 and "=\]". The <-- HERE shows in the regular expression about where the
3254 problem was discovered. See L<perlre>.
3256 =item Possible attempt to put comments in qw() list
3258 (W qw) qw() lists contain items separated by whitespace; as with literal
3259 strings, comment characters are not ignored, but are instead treated as
3260 literal data. (You may have used different delimiters than the
3261 parentheses shown here; braces are also frequently used.)
3263 You probably wrote something like this:
3270 when you should have written this:
3277 If you really want comments, build your list the
3278 old-fashioned way, with quotes and commas:
3282 'b', # another comment
3285 =item Possible attempt to separate words with commas
3287 (W qw) qw() lists contain items separated by whitespace; therefore
3288 commas aren't needed to separate the items. (You may have used
3289 different delimiters than the parentheses shown here; braces are also
3292 You probably wrote something like this:
3296 which puts literal commas into some of the list items. Write it without
3297 commas if you don't want them to appear in your data:
3301 =item Possible memory corruption: %s overflowed 3rd argument
3303 (F) An ioctl() or fcntl() returned more than Perl was bargaining for.
3304 Perl guesses a reasonable buffer size, but puts a sentinel byte at the
3305 end of the buffer just in case. This sentinel byte got clobbered, and
3306 Perl assumes that memory is now corrupted. See L<perlfunc/ioctl>.
3308 =item Possible precedence problem on bitwise %c operator
3310 (W precedence) Your program uses a bitwise logical operator in conjunction
3311 with a numeric comparison operator, like this :
3313 if ($x & $y == 0) { ... }
3315 This expression is actually equivalent to C<$x & ($y == 0)>, due to the
3316 higher precedence of C<==>. This is probably not what you want. (If you
3317 really meant to write this, disable the warning, or, better, put the
3318 parentheses explicitly and write C<$x & ($y == 0)>).
3320 =item Possible unintended interpolation of %s in string
3322 (W ambiguous) You said something like `@foo' in a double-quoted string
3323 but there was no array C<@foo> in scope at the time. If you wanted a
3324 literal @foo, then write it as \@foo; otherwise find out what happened
3325 to the array you apparently lost track of.
3327 =item pragma "attrs" is deprecated, use "sub NAME : ATTRS" instead
3329 (D deprecated) You have written something like this:
3333 use attrs qw(locked);
3336 You should use the new declaration syntax instead.
3342 The C<use attrs> pragma is now obsolete, and is only provided for
3343 backward-compatibility. See L<perlsub/"Subroutine Attributes">.
3345 =item Precedence problem: open %s should be open(%s)
3347 (S precedence) The old irregular construct
3351 is now misinterpreted as
3355 because of the strict regularization of Perl 5's grammar into unary and
3356 list operators. (The old open was a little of both.) You must put
3357 parentheses around the filehandle, or use the new "or" operator instead
3360 =item Premature end of script headers
3364 =item printf() on closed filehandle %s
3366 (W closed) The filehandle you're writing to got itself closed sometime
3367 before now. Check your control flow.
3369 =item print() on closed filehandle %s
3371 (W closed) The filehandle you're printing on got itself closed sometime
3372 before now. Check your control flow.
3374 =item Process terminated by SIG%s
3376 (W) This is a standard message issued by OS/2 applications, while *nix
3377 applications die in silence. It is considered a feature of the OS/2
3378 port. One can easily disable this by appropriate sighandlers, see
3379 L<perlipc/"Signals">. See also "Process terminated by SIGTERM/SIGINT"
3382 =item Prototype mismatch: %s vs %s
3384 (S prototype) The subroutine being declared or defined had previously been
3385 declared or defined with a different function prototype.
3387 =item Prototype not terminated
3389 (F) You've omitted the closing parenthesis in a function prototype
3392 =item Quantifier follows nothing in regex; marked by <-- HERE in m/%s/
3394 (F) You started a regular expression with a quantifier. Backslash it if you
3395 meant it literally. The <-- HERE shows in the regular expression about
3396 where the problem was discovered. See L<perlre>.
3398 =item Quantifier in {,} bigger than %d in regex; marked by <-- HERE in m/%s/
3400 (F) There is currently a limit to the size of the min and max values of the
3401 {min,max} construct. The <-- HERE shows in the regular expression about where
3402 the problem was discovered. See L<perlre>.
3404 =item Quantifier unexpected on zero-length expression; marked by <-- HERE in m/%s/
3406 (W regexp) You applied a regular expression quantifier in a place where
3407 it makes no sense, such as on a zero-width assertion. Try putting the
3408 quantifier inside the assertion instead. For example, the way to match
3409 "abc" provided that it is followed by three repetitions of "xyz" is
3410 C</abc(?=(?:xyz){3})/>, not C</abc(?=xyz){3}/>.
3412 The <-- HERE shows in the regular expression about where the problem was
3415 =item Range iterator outside integer range
3417 (F) One (or both) of the numeric arguments to the range operator ".."
3418 are outside the range which can be represented by integers internally.
3419 One possible workaround is to force Perl to use magical string increment
3420 by prepending "0" to your numbers.
3422 =item readdir() attempted on invalid dirhandle %s
3424 (W io) The dirhandle you're reading from is either closed or not really
3425 a dirhandle. Check your control flow.
3427 =item readline() on closed filehandle %s
3429 (W closed) The filehandle you're reading from got itself closed sometime
3430 before now. Check your control flow.
3432 =item read() on closed filehandle %s
3434 (W closed) You tried to read from a closed filehandle.
3436 =item read() on unopened filehandle %s
3438 (W unopened) You tried to read from a filehandle that was never opened.
3440 =item Reallocation too large: %lx
3442 (F) You can't allocate more than 64K on an MS-DOS machine.
3444 =item realloc() of freed memory ignored
3446 (S malloc) An internal routine called realloc() on something that had
3449 =item Recompile perl with B<-D>DEBUGGING to use B<-D> switch
3451 (F debugging) You can't use the B<-D> option unless the code to produce
3452 the desired output is compiled into Perl, which entails some overhead,
3453 which is why it's currently left out of your copy.
3455 =item Recursive inheritance detected in package '%s'
3457 (F) More than 100 levels of inheritance were used. Probably indicates
3458 an unintended loop in your inheritance hierarchy.
3460 =item Recursive inheritance detected while looking for method %s
3462 (F) More than 100 levels of inheritance were encountered while invoking
3463 a method. Probably indicates an unintended loop in your inheritance
3466 =item Reference found where even-sized list expected
3468 (W misc) You gave a single reference where Perl was expecting a list
3469 with an even number of elements (for assignment to a hash). This usually
3470 means that you used the anon hash constructor when you meant to use
3471 parens. In any case, a hash requires key/value B<pairs>.
3473 %hash = { one => 1, two => 2, }; # WRONG
3474 %hash = [ qw/ an anon array / ]; # WRONG
3475 %hash = ( one => 1, two => 2, ); # right
3476 %hash = qw( one 1 two 2 ); # also fine
3478 =item Reference is already weak
3480 (W misc) You have attempted to weaken a reference that is already weak.
3481 Doing so has no effect.
3483 =item Reference miscount in sv_replace()
3485 (W internal) The internal sv_replace() function was handed a new SV with
3486 a reference count of other than 1.
3488 =item Reference to nonexistent group in regex; marked by <-- HERE in m/%s/
3490 (F) You used something like C<\7> in your regular expression, but there are
3491 not at least seven sets of capturing parentheses in the expression. If you
3492 wanted to have the character with value 7 inserted into the regular expression,
3493 prepend a zero to make the number at least two digits: C<\07>
3495 The <-- HERE shows in the regular expression about where the problem was
3498 =item Reference to nonexistent or unclosed group in regex; marked by <-- HERE in m/%s/
3500 (F) You used something like C<\R7> in your regular expression, but there are
3501 not at least seven sets of closed capturing parentheses in the expression before
3502 where the C<\R7> was located. It's also possible you forgot to escape the
3505 The <-- HERE shows in the regular expression about where the problem was
3508 =item Reference to nonexistent named group in regex; marked by <-- HERE in m/%s/
3510 (F) You used something like C<\k'NAME'> or C<< \k<NAME> >> in your regular
3511 expression, but there is no corresponding named capturing parentheses such
3512 as C<(?'NAME'...)> or C<(?<NAME>...). Check if the name has been spelled
3513 correctly both in the backreference and the declaration.
3515 The <-- HERE shows in the regular expression about where the problem was
3518 =item (?(DEFINE)....) does not allow branches in regex; marked by <-- HERE in m/%s/
3520 (F) You used something like C<(?(DEFINE)...|..)> which is illegal. The
3521 most likely cause of this error is that you left out a parenthesis inside
3522 of the C<....> part.
3524 The <-- HERE shows in the regular expression about where the problem was
3527 =item regexp memory corruption
3529 (P) The regular expression engine got confused by what the regular
3530 expression compiler gave it.
3532 =item Regexp out of space
3534 (P) A "can't happen" error, because safemalloc() should have caught it
3537 =item Repeated format line will never terminate (~~ and @# incompatible)
3539 (F) Your format contains the ~~ repeat-until-blank sequence and a
3540 numeric field that will never go blank so that the repetition never
3541 terminates. You might use ^# instead. See L<perlform>.
3543 =item Reversed %s= operator
3545 (W syntax) You wrote your assignment operator backwards. The = must
3546 always comes last, to avoid ambiguity with subsequent unary operators.
3548 =item rewinddir() attempted on invalid dirhandle %s
3550 (W io) The dirhandle you tried to do a rewinddir() on is either closed or not
3551 really a dirhandle. Check your control flow.
3553 =item Runaway format
3555 (F) Your format contained the ~~ repeat-until-blank sequence, but it
3556 produced 200 lines at once, and the 200th line looked exactly like the
3557 199th line. Apparently you didn't arrange for the arguments to exhaust
3558 themselves, either by using ^ instead of @ (for scalar variables), or by
3559 shifting or popping (for array variables). See L<perlform>.
3561 =item Scalars leaked: %d
3563 (P) Something went wrong in Perl's internal bookkeeping of scalars:
3564 not all scalar variables were deallocated by the time Perl exited.
3565 What this usually indicates is a memory leak, which is of course bad,
3566 especially if the Perl program is intended to be long-running.
3568 =item Scalar value @%s[%s] better written as $%s[%s]
3570 (W syntax) You've used an array slice (indicated by @) to select a
3571 single element of an array. Generally it's better to ask for a scalar
3572 value (indicated by $). The difference is that C<$foo[&bar]> always
3573 behaves like a scalar, both when assigning to it and when evaluating its
3574 argument, while C<@foo[&bar]> behaves like a list when you assign to it,
3575 and provides a list context to its subscript, which can do weird things
3576 if you're expecting only one subscript.
3578 On the other hand, if you were actually hoping to treat the array
3579 element as a list, you need to look into how references work, because
3580 Perl will not magically convert between scalars and lists for you. See
3583 =item Scalar value @%s{%s} better written as $%s{%s}
3585 (W syntax) You've used a hash slice (indicated by @) to select a single
3586 element of a hash. Generally it's better to ask for a scalar value
3587 (indicated by $). The difference is that C<$foo{&bar}> always behaves
3588 like a scalar, both when assigning to it and when evaluating its
3589 argument, while C<@foo{&bar}> behaves like a list when you assign to it,
3590 and provides a list context to its subscript, which can do weird things
3591 if you're expecting only one subscript.
3593 On the other hand, if you were actually hoping to treat the hash element
3594 as a list, you need to look into how references work, because Perl will
3595 not magically convert between scalars and lists for you. See
3598 =item Script is not setuid/setgid in suidperl
3600 (F) Oddly, the suidperl program was invoked on a script without a setuid
3601 or setgid bit set. This doesn't make much sense.
3603 =item Search pattern not terminated
3605 (F) The lexer couldn't find the final delimiter of a // or m{}
3606 construct. Remember that bracketing delimiters count nesting level.
3607 Missing the leading C<$> from a variable C<$m> may cause this error.
3609 Note that since Perl 5.9.0 a // can also be the I<defined-or>
3610 construct, not just the empty search pattern. Therefore code written
3611 in Perl 5.9.0 or later that uses the // as the I<defined-or> can be
3612 misparsed by pre-5.9.0 Perls as a non-terminated search pattern.
3614 =item Search pattern not terminated or ternary operator parsed as search pattern
3616 (F) The lexer couldn't find the final delimiter of a C<?PATTERN?>
3619 The question mark is also used as part of the ternary operator (as in
3620 C<foo ? 0 : 1>) leading to some ambiguous constructions being wrongly
3621 parsed. One way to disambiguate the parsing is to put parentheses around
3622 the conditional expression, i.e. C<(foo) ? 0 : 1>.
3624 =item %sseek() on unopened filehandle
3626 (W unopened) You tried to use the seek() or sysseek() function on a
3627 filehandle that was either never opened or has since been closed.
3629 =item seekdir() attempted on invalid dirhandle %s
3631 (W io) The dirhandle you are doing a seekdir() on is either closed or not
3632 really a dirhandle. Check your control flow.
3634 =item select not implemented
3636 (F) This machine doesn't implement the select() system call.
3638 =item Self-ties of arrays and hashes are not supported
3640 (F) Self-ties are of arrays and hashes are not supported in
3641 the current implementation.
3643 =item Semicolon seems to be missing
3645 (W semicolon) A nearby syntax error was probably caused by a missing
3646 semicolon, or possibly some other missing operator, such as a comma.
3648 =item semi-panic: attempt to dup freed string
3650 (S internal) The internal newSVsv() routine was called to duplicate a
3651 scalar that had previously been marked as free.
3653 =item sem%s not implemented
3655 (F) You don't have System V semaphore IPC on your system.
3657 =item send() on closed socket %s
3659 (W closed) The socket you're sending to got itself closed sometime
3660 before now. Check your control flow.
3662 =item Sequence (? incomplete in regex; marked by <-- HERE in m/%s/
3664 (F) A regular expression ended with an incomplete extension (?. The <-- HERE
3665 shows in the regular expression about where the problem was discovered. See
3668 =item Sequence (?%s...) not implemented in regex; marked by <-- HERE in m/%s/
3670 (F) A proposed regular expression extension has the character reserved but
3671 has not yet been written. The <-- HERE shows in the regular expression about
3672 where the problem was discovered. See L<perlre>.
3674 =item Sequence (?%s...) not recognized in regex; marked by <-- HERE in m/%s/
3676 (F) You used a regular expression extension that doesn't make sense. The
3677 <-- HERE shows in the regular expression about where the problem was
3678 discovered. See L<perlre>.
3680 =item Sequence (?#... not terminated in regex; marked by <-- HERE in m/%s/
3682 (F) A regular expression comment must be terminated by a closing
3683 parenthesis. Embedded parentheses aren't allowed. The <-- HERE shows in
3684 the regular expression about where the problem was discovered. See
3687 =item Sequence (?{...}) not terminated or not {}-balanced in regex; marked by <-- HERE in m/%s/
3689 (F) If the contents of a (?{...}) clause contains braces, they must balance
3690 for Perl to properly detect the end of the clause. The <-- HERE shows in
3691 the regular expression about where the problem was discovered. See
3694 =item 500 Server error
3700 This is the error message generally seen in a browser window when trying
3701 to run a CGI program (including SSI) over the web. The actual error text
3702 varies widely from server to server. The most frequently-seen variants
3703 are "500 Server error", "Method (something) not permitted", "Document
3704 contains no data", "Premature end of script headers", and "Did not
3705 produce a valid header".
3707 B<This is a CGI error, not a Perl error>.
3709 You need to make sure your script is executable, is accessible by the
3710 user CGI is running the script under (which is probably not the user
3711 account you tested it under), does not rely on any environment variables
3712 (like PATH) from the user it isn't running under, and isn't in a
3713 location where the CGI server can't find it, basically, more or less.
3714 Please see the following for more information:
3716 http://www.perl.org/CGI_MetaFAQ.html
3717 http://www.htmlhelp.org/faq/cgifaq.html
3718 http://www.w3.org/Security/Faq/
3720 You should also look at L<perlfaq9>.
3722 =item setegid() not implemented
3724 (F) You tried to assign to C<$)>, and your operating system doesn't
3725 support the setegid() system call (or equivalent), or at least Configure
3728 =item seteuid() not implemented
3730 (F) You tried to assign to C<< $> >>, and your operating system doesn't
3731 support the seteuid() system call (or equivalent), or at least Configure
3734 =item setpgrp can't take arguments
3736 (F) Your system has the setpgrp() from BSD 4.2, which takes no
3737 arguments, unlike POSIX setpgid(), which takes a process ID and process
3740 =item setrgid() not implemented
3742 (F) You tried to assign to C<$(>, and your operating system doesn't
3743 support the setrgid() system call (or equivalent), or at least Configure
3746 =item setruid() not implemented
3748 (F) You tried to assign to C<$<>, and your operating system doesn't
3749 support the setruid() system call (or equivalent), or at least Configure
3752 =item setsockopt() on closed socket %s
3754 (W closed) You tried to set a socket option on a closed socket. Did you
3755 forget to check the return value of your socket() call? See
3756 L<perlfunc/setsockopt>.
3758 =item Setuid/gid script is writable by world
3760 (F) The setuid emulator won't run a script that is writable by the
3761 world, because the world might have written on it already.
3763 =item Setuid script not plain file
3765 (F) The setuid emulator won't run a script that isn't read from a file,
3766 but from a socket, a pipe or another device.
3768 =item shm%s not implemented
3770 (F) You don't have System V shared memory IPC on your system.
3772 =item !=~ should be !~
3774 (W syntax) The non-matching operator is !~, not !=~. !=~ will be
3775 interpreted as the != (numeric not equal) and ~ (1's complement)
3776 operators: probably not what you intended.
3778 =item <> should be quotes
3780 (F) You wrote C<< require <file> >> when you should have written
3783 =item /%s/ should probably be written as "%s"
3785 (W syntax) You have used a pattern where Perl expected to find a string,
3786 as in the first argument to C<join>. Perl will treat the true or false
3787 result of matching the pattern against $_ as the string, which is
3788 probably not what you had in mind.
3790 =item shutdown() on closed socket %s
3792 (W closed) You tried to do a shutdown on a closed socket. Seems a bit
3795 =item SIG%s handler "%s" not defined
3797 (W signal) The signal handler named in %SIG doesn't, in fact, exist.
3798 Perhaps you put it into the wrong package?
3800 =item sort is now a reserved word
3802 (F) An ancient error message that almost nobody ever runs into anymore.
3803 But before sort was a keyword, people sometimes used it as a filehandle.
3805 =item Sort subroutine didn't return a numeric value
3807 (F) A sort comparison routine must return a number. You probably blew
3808 it by not using C<< <=> >> or C<cmp>, or by not using them correctly.
3809 See L<perlfunc/sort>.
3811 =item Sort subroutine didn't return single value
3813 (F) A sort comparison subroutine may not return a list value with more
3814 or less than one element. See L<perlfunc/sort>.
3816 =item splice() offset past end of array
3818 (W misc) You attempted to specify an offset that was past the end of
3819 the array passed to splice(). Splicing will instead commence at the end
3820 of the array, rather than past it. If this isn't what you want, try
3821 explicitly pre-extending the array by assigning $#array = $offset. See
3826 (P) The split was looping infinitely. (Obviously, a split shouldn't
3827 iterate more times than there are characters of input, which is what
3828 happened.) See L<perlfunc/split>.
3830 =item State variable %s will be reinitialized
3832 (W misc) You're declaring a C<state> variable inside a list. The list
3833 assignment will be treated by perl as a regular assignment, which means
3834 that the C<state> variable will be reinitialized each time the statement
3835 is run. The solution to have it initialized only once is to write the
3836 assignment on its own line, as in:
3840 =item Statement unlikely to be reached
3842 (W exec) You did an exec() with some statement after it other than a
3843 die(). This is almost always an error, because exec() never returns
3844 unless there was a failure. You probably wanted to use system()
3845 instead, which does return. To suppress this warning, put the exec() in
3848 =item stat() on unopened filehandle %s
3850 (W unopened) You tried to use the stat() function on a filehandle that
3851 was either never opened or has since been closed.
3853 =item Stub found while resolving method "%s" overloading "%s"
3855 (P) Overloading resolution over @ISA tree may be broken by importation
3856 stubs. Stubs should never be implicitly created, but explicit calls to
3857 C<can> may break this.
3859 =item Subroutine %s redefined
3861 (W redefine) You redefined a subroutine. To suppress this warning, say
3864 no warnings 'redefine';
3865 eval "sub name { ... }";
3868 =item Substitution loop
3870 (P) The substitution was looping infinitely. (Obviously, a substitution
3871 shouldn't iterate more times than there are characters of input, which
3872 is what happened.) See the discussion of substitution in
3873 L<perlop/"Regexp Quote-Like Operators">.
3875 =item Substitution pattern not terminated
3877 (F) The lexer couldn't find the interior delimiter of an s/// or s{}{}
3878 construct. Remember that bracketing delimiters count nesting level.
3879 Missing the leading C<$> from variable C<$s> may cause this error.
3881 =item Substitution replacement not terminated
3883 (F) The lexer couldn't find the final delimiter of an s/// or s{}{}
3884 construct. Remember that bracketing delimiters count nesting level.
3885 Missing the leading C<$> from variable C<$s> may cause this error.
3887 =item substr outside of string
3889 (W substr),(F) You tried to reference a substr() that pointed outside of
3890 a string. That is, the absolute value of the offset was larger than the
3891 length of the string. See L<perlfunc/substr>. This warning is fatal if
3892 substr is used in an lvalue context (as the left hand side of an
3893 assignment or as a subroutine argument for example).
3895 =item suidperl is no longer needed since %s
3897 (F) Your Perl was compiled with B<-D>SETUID_SCRIPTS_ARE_SECURE_NOW, but
3898 a version of the setuid emulator somehow got run anyway.
3900 =item sv_upgrade from type %d down to type %d
3902 (P) Perl tried to force the upgrade an SV to a type which was actually
3903 inferior to its current type.
3905 =item Switch (?(condition)... contains too many branches in regex; marked by <-- HERE in m/%s/
3907 (F) A (?(condition)if-clause|else-clause) construct can have at most two
3908 branches (the if-clause and the else-clause). If you want one or both to
3909 contain alternation, such as using C<this|that|other>, enclose it in
3910 clustering parentheses:
3912 (?(condition)(?:this|that|other)|else-clause)
3914 The <-- HERE shows in the regular expression about where the problem was
3915 discovered. See L<perlre>.
3917 =item Switch condition not recognized in regex; marked by <-- HERE in m/%s/
3919 (F) If the argument to the (?(...)if-clause|else-clause) construct is a
3920 number, it can be only a number. The <-- HERE shows in the regular expression
3921 about where the problem was discovered. See L<perlre>.
3923 =item switching effective %s is not implemented
3925 (F) While under the C<use filetest> pragma, we cannot switch the real
3926 and effective uids or gids.
3930 (F) The final summary message when a C<perl -c> succeeds.
3934 (F) Probably means you had a syntax error. Common reasons include:
3936 A keyword is misspelled.
3937 A semicolon is missing.
3939 An opening or closing parenthesis is missing.
3940 An opening or closing brace is missing.
3941 A closing quote is missing.
3943 Often there will be another error message associated with the syntax
3944 error giving more information. (Sometimes it helps to turn on B<-w>.)
3945 The error message itself often tells you where it was in the line when
3946 it decided to give up. Sometimes the actual error is several tokens
3947 before this, because Perl is good at understanding random input.
3948 Occasionally the line number may be misleading, and once in a blue moon
3949 the only way to figure out what's triggering the error is to call
3950 C<perl -c> repeatedly, chopping away half the program each time to see
3951 if the error went away. Sort of the cybernetic version of S<20
3954 =item syntax error at line %d: `%s' unexpected
3956 (A) You've accidentally run your script through the Bourne shell instead
3957 of Perl. Check the #! line, or manually feed your script into Perl
3960 =item syntax error in file %s at line %d, next 2 tokens "%s"
3962 (F) This error is likely to occur if you run a perl5 script through
3963 a perl4 interpreter, especially if the next 2 tokens are "use strict"
3964 or "my $var" or "our $var".
3966 =item sysread() on closed filehandle %s
3968 (W closed) You tried to read from a closed filehandle.
3970 =item sysread() on unopened filehandle %s
3972 (W unopened) You tried to read from a filehandle that was never opened.
3974 =item System V %s is not implemented on this machine
3976 (F) You tried to do something with a function beginning with "sem",
3977 "shm", or "msg" but that System V IPC is not implemented in your
3978 machine. In some machines the functionality can exist but be
3979 unconfigured. Consult your system support.
3981 =item syswrite() on closed filehandle %s
3983 (W closed) The filehandle you're writing to got itself closed sometime
3984 before now. Check your control flow.
3986 =item C<-T> and C<-B> not implemented on filehandles
3988 (F) Perl can't peek at the stdio buffer of filehandles when it doesn't
3989 know about your kind of stdio. You'll have to use a filename instead.
3991 =item Target of goto is too deeply nested
3993 (F) You tried to use C<goto> to reach a label that was too deeply nested
3994 for Perl to reach. Perl is doing you a favor by refusing.
3996 =item tell() on unopened filehandle
3998 (W unopened) You tried to use the tell() function on a filehandle that
3999 was either never opened or has since been closed.
4001 =item telldir() attempted on invalid dirhandle %s
4003 (W io) The dirhandle you tried to telldir() is either closed or not really
4004 a dirhandle. Check your control flow.
4006 =item That use of $[ is unsupported
4008 (F) Assignment to C<$[> is now strictly circumscribed, and interpreted
4009 as a compiler directive. You may say only one of
4018 This is to prevent the problem of one module changing the array base out
4019 from under another module inadvertently. See L<perlvar/$[>.
4021 =item The crypt() function is unimplemented due to excessive paranoia
4023 (F) Configure couldn't find the crypt() function on your machine,
4024 probably because your vendor didn't supply it, probably because they
4025 think the U.S. Government thinks it's a secret, or at least that they
4026 will continue to pretend that it is. And if you quote me on that, I
4029 =item The %s function is unimplemented
4031 The function indicated isn't implemented on this architecture, according
4032 to the probings of Configure.
4034 =item The stat preceding %s wasn't an lstat
4036 (F) It makes no sense to test the current stat buffer for symbolic
4037 linkhood if the last stat that wrote to the stat buffer already went
4038 past the symlink to get to the real file. Use an actual filename
4041 =item The 'unique' attribute may only be applied to 'our' variables
4043 (F) This attribute was never supported on C<my> or C<sub> declarations.
4045 =item This Perl can't reset CRTL environ elements (%s)
4047 =item This Perl can't set CRTL environ elements (%s=%s)
4049 (W internal) Warnings peculiar to VMS. You tried to change or delete an
4050 element of the CRTL's internal environ array, but your copy of Perl
4051 wasn't built with a CRTL that contained the setenv() function. You'll
4052 need to rebuild Perl with a CRTL that does, or redefine
4053 F<PERL_ENV_TABLES> (see L<perlvms>) so that the environ array isn't the
4054 target of the change to
4055 %ENV which produced the warning.
4057 =item thread failed to start: %s
4059 (W threads)(S) The entry point function of threads->create() failed for some reason.
4061 =item times not implemented
4063 (F) Your version of the C library apparently doesn't do times(). I
4064 suspect you're not running on Unix.
4066 =item "-T" is on the #! line, it must also be used on the command line
4068 (X) The #! line (or local equivalent) in a Perl script contains the
4069 B<-T> option, but Perl was not invoked with B<-T> in its command line.
4070 This is an error because, by the time Perl discovers a B<-T> in a
4071 script, it's too late to properly taint everything from the environment.
4074 If the Perl script is being executed as a command using the #!
4075 mechanism (or its local equivalent), this error can usually be fixed by
4076 editing the #! line so that the B<-T> option is a part of Perl's first
4077 argument: e.g. change C<perl -n -T> to C<perl -T -n>.
4079 If the Perl script is being executed as C<perl scriptname>, then the
4080 B<-T> option must appear on the command line: C<perl -T scriptname>.
4082 =item To%s: illegal mapping '%s'
4084 (F) You tried to define a customized To-mapping for lc(), lcfirst,
4085 uc(), or ucfirst() (or their string-inlined versions), but you
4086 specified an illegal mapping.
4087 See L<perlunicode/"User-Defined Character Properties">.
4089 =item Too deeply nested ()-groups
4091 (F) Your template contains ()-groups with a ridiculously deep nesting level.
4093 =item Too few args to syscall
4095 (F) There has to be at least one argument to syscall() to specify the
4096 system call to call, silly dilly.
4098 =item Too late for "-%s" option
4100 (X) The #! line (or local equivalent) in a Perl script contains the
4101 B<-M>, B<-m> or B<-C> option. This is an error because those options
4102 are not intended for use inside scripts. Use the C<use> pragma instead.
4104 =item Too late to run %s block
4106 (W void) A CHECK or INIT block is being defined during run time proper,
4107 when the opportunity to run them has already passed. Perhaps you are
4108 loading a file with C<require> or C<do> when you should be using C<use>
4109 instead. Or perhaps you should put the C<require> or C<do> inside a
4112 =item Too many args to syscall
4114 (F) Perl supports a maximum of only 14 args to syscall().
4116 =item Too many arguments for %s
4118 (F) The function requires fewer arguments than you specified.
4122 (A) You've accidentally run your script through B<csh> instead of Perl.
4123 Check the #! line, or manually feed your script into Perl yourself.
4127 (A) You've accidentally run your script through B<csh> instead of Perl.
4128 Check the #! line, or manually feed your script into Perl yourself.
4130 =item Trailing \ in regex m/%s/
4132 (F) The regular expression ends with an unbackslashed backslash.
4133 Backslash it. See L<perlre>.
4135 =item Transliteration pattern not terminated
4137 (F) The lexer couldn't find the interior delimiter of a tr/// or tr[][]
4138 or y/// or y[][] construct. Missing the leading C<$> from variables
4139 C<$tr> or C<$y> may cause this error.
4141 =item Transliteration replacement not terminated
4143 (F) The lexer couldn't find the final delimiter of a tr///, tr[][],
4144 y/// or y[][] construct.
4146 =item '%s' trapped by operation mask
4148 (F) You tried to use an operator from a Safe compartment in which it's
4149 disallowed. See L<Safe>.
4151 =item truncate not implemented
4153 (F) Your machine doesn't implement a file truncation mechanism that
4154 Configure knows about.
4156 =item Type of arg %d to %s must be %s (not %s)
4158 (F) This function requires the argument in that position to be of a
4159 certain type. Arrays must be @NAME or C<@{EXPR}>. Hashes must be
4160 %NAME or C<%{EXPR}>. No implicit dereferencing is allowed--use the
4161 {EXPR} forms as an explicit dereference. See L<perlref>.
4163 =item umask not implemented
4165 (F) Your machine doesn't implement the umask function and you tried to
4166 use it to restrict permissions for yourself (EXPR & 0700).
4168 =item Unable to create sub named "%s"
4170 (F) You attempted to create or access a subroutine with an illegal name.
4172 =item Unbalanced context: %d more PUSHes than POPs
4174 (W internal) The exit code detected an internal inconsistency in how
4175 many execution contexts were entered and left.
4177 =item Unbalanced saves: %d more saves than restores
4179 (W internal) The exit code detected an internal inconsistency in how
4180 many values were temporarily localized.
4182 =item Unbalanced scopes: %d more ENTERs than LEAVEs
4184 (W internal) The exit code detected an internal inconsistency in how
4185 many blocks were entered and left.
4187 =item Unbalanced tmps: %d more allocs than frees
4189 (W internal) The exit code detected an internal inconsistency in how
4190 many mortal scalars were allocated and freed.
4192 =item Undefined format "%s" called
4194 (F) The format indicated doesn't seem to exist. Perhaps it's really in
4195 another package? See L<perlform>.
4197 =item Undefined sort subroutine "%s" called
4199 (F) The sort comparison routine specified doesn't seem to exist.
4200 Perhaps it's in a different package? See L<perlfunc/sort>.
4202 =item Undefined subroutine &%s called
4204 (F) The subroutine indicated hasn't been defined, or if it was, it has
4205 since been undefined.
4207 =item Undefined subroutine called
4209 (F) The anonymous subroutine you're trying to call hasn't been defined,
4210 or if it was, it has since been undefined.
4212 =item Undefined subroutine in sort
4214 (F) The sort comparison routine specified is declared but doesn't seem
4215 to have been defined yet. See L<perlfunc/sort>.
4217 =item Undefined top format "%s" called
4219 (F) The format indicated doesn't seem to exist. Perhaps it's really in
4220 another package? See L<perlform>.
4222 =item Undefined value assigned to typeglob
4224 (W misc) An undefined value was assigned to a typeglob, a la
4225 C<*foo = undef>. This does nothing. It's possible that you really mean
4228 =item %s: Undefined variable
4230 (A) You've accidentally run your script through B<csh> instead of Perl.
4231 Check the #! line, or manually feed your script into Perl yourself.
4233 =item unexec of %s into %s failed!
4235 (F) The unexec() routine failed for some reason. See your local FSF
4236 representative, who probably put it there in the first place.
4238 =item Unicode character %s is illegal
4240 (W utf8) Certain Unicode characters have been designated off-limits by
4241 the Unicode standard and should not be generated. If you really know
4242 what you are doing you can turn off this warning by C<no warnings 'utf8';>.
4244 =item Unknown BYTEORDER
4246 (F) There are no byte-swapping functions for a machine with this byte
4249 =item Unknown open() mode '%s'
4251 (F) The second argument of 3-argument open() is not among the list
4252 of valid modes: C<< < >>, C<< > >>, C<<< >> >>>, C<< +< >>,
4253 C<< +> >>, C<<< +>> >>>, C<-|>, C<|->, C<< <& >>, C<< >& >>.
4255 =item Unknown PerlIO layer "%s"
4257 (W layer) An attempt was made to push an unknown layer onto the Perl I/O
4258 system. (Layers take care of transforming data between external and
4259 internal representations.) Note that some layers, such as C<mmap>,
4260 are not supported in all environments. If your program didn't
4261 explicitly request the failing operation, it may be the result of the
4262 value of the environment variable PERLIO.
4264 =item Unknown process %x sent message to prime_env_iter: %s
4266 (P) An error peculiar to VMS. Perl was reading values for %ENV before
4267 iterating over it, and someone else stuck a message in the stream of
4268 data Perl expected. Someone's very confused, or perhaps trying to
4269 subvert Perl's population of %ENV for nefarious purposes.
4271 =item Unknown "re" subpragma '%s' (known ones are: %s)
4273 You tried to use an unknown subpragma of the "re" pragma.
4275 =item Unknown switch condition (?(%.2s in regex; marked by <-- HERE in m/%s/
4277 (F) The condition part of a (?(condition)if-clause|else-clause) construct
4278 is not known. The condition may be lookahead or lookbehind (the condition
4279 is true if the lookahead or lookbehind is true), a (?{...}) construct (the
4280 condition is true if the code evaluates to a true value), or a number (the
4281 condition is true if the set of capturing parentheses named by the number
4284 The <-- HERE shows in the regular expression about where the problem was
4285 discovered. See L<perlre>.
4287 =item Unknown Unicode option letter '%c'
4289 You specified an unknown Unicode option. See L<perlrun> documentation
4290 of the C<-C> switch for the list of known options.
4292 =item Unknown Unicode option value %x
4294 You specified an unknown Unicode option. See L<perlrun> documentation
4295 of the C<-C> switch for the list of known options.
4297 =item Unknown warnings category '%s'
4299 (F) An error issued by the C<warnings> pragma. You specified a warnings
4300 category that is unknown to perl at this point.
4302 Note that if you want to enable a warnings category registered by a module
4303 (e.g. C<use warnings 'File::Find'>), you must have imported this module
4305 =item Unknown verb pattern '%s' in regex; marked by <-- HERE in m/%s/
4307 (F) You either made a typo or have incorrectly put a C<*> quantifier
4308 after an open brace in your pattern. Check the pattern and review
4309 L<perlre> for details on legal verb patterns.
4313 =item unmatched [ in regex; marked by <-- HERE in m/%s/
4315 (F) The brackets around a character class must match. If you wish to
4316 include a closing bracket in a character class, backslash it or put it
4317 first. The <-- HERE shows in the regular expression about where the problem
4318 was discovered. See L<perlre>.
4320 =item unmatched ( in regex; marked by <-- HERE in m/%s/
4322 (F) Unbackslashed parentheses must always be balanced in regular
4323 expressions. If you're a vi user, the % key is valuable for finding the
4324 matching parenthesis. The <-- HERE shows in the regular expression about
4325 where the problem was discovered. See L<perlre>.
4327 =item Unmatched right %s bracket
4329 (F) The lexer counted more closing curly or square brackets than opening
4330 ones, so you're probably missing a matching opening bracket. As a
4331 general rule, you'll find the missing one (so to speak) near the place
4332 you were last editing.
4334 =item Unquoted string "%s" may clash with future reserved word
4336 (W reserved) You used a bareword that might someday be claimed as a
4337 reserved word. It's best to put such a word in quotes, or capitalize it
4338 somehow, or insert an underbar into it. You might also declare it as a
4341 =item Unrecognized character %s
4343 (F) The Perl parser has no idea what to do with the specified character
4344 in your Perl script (or eval). Perhaps you tried to run a compressed
4345 script, a binary program, or a directory as a Perl program.
4347 =item Unrecognized escape \\%c in character class passed through in regex; marked by <-- HERE in m/%s/
4349 (W regexp) You used a backslash-character combination which is not
4350 recognized by Perl inside character classes. The character was
4351 understood literally.
4352 The <-- HERE shows in the regular expression about where the
4353 escape was discovered.
4355 =item Unrecognized escape \\%c passed through
4357 (W misc) You used a backslash-character combination which is not
4358 recognized by Perl. The character was understood literally.
4360 =item Unrecognized escape \\%c passed through in regex; marked by <-- HERE in m/%s/
4362 (W regexp) You used a backslash-character combination which is not
4363 recognized by Perl. The character was understood literally.
4364 The <-- HERE shows in the regular expression about where the
4365 escape was discovered.
4367 =item Unrecognized signal name "%s"
4369 (F) You specified a signal name to the kill() function that was not
4370 recognized. Say C<kill -l> in your shell to see the valid signal names
4373 =item Unrecognized switch: -%s (-h will show valid options)
4375 (F) You specified an illegal option to Perl. Don't do that. (If you
4376 think you didn't do that, check the #! line to see if it's supplying the
4377 bad switch on your behalf.)
4379 =item Unsuccessful %s on filename containing newline
4381 (W newline) A file operation was attempted on a filename, and that
4382 operation failed, PROBABLY because the filename contained a newline,
4383 PROBABLY because you forgot to chomp() it off. See L<perlfunc/chomp>.
4385 =item Unsupported directory function "%s" called
4387 (F) Your machine doesn't support opendir() and readdir().
4389 =item Unsupported function %s
4391 (F) This machine doesn't implement the indicated function, apparently.
4392 At least, Configure doesn't think so.
4394 =item Unsupported function fork
4396 (F) Your version of executable does not support forking.
4398 Note that under some systems, like OS/2, there may be different flavors
4399 of Perl executables, some of which may support fork, some not. Try
4400 changing the name you call Perl by to C<perl_>, C<perl__>, and so on.
4402 =item Unsupported script encoding %s
4404 (F) Your program file begins with a Unicode Byte Order Mark (BOM) which
4405 declares it to be in a Unicode encoding that Perl cannot read.
4407 =item Unsupported socket function "%s" called
4409 (F) Your machine doesn't support the Berkeley socket mechanism, or at
4410 least that's what Configure thought.
4412 =item Unterminated attribute list
4414 (F) The lexer found something other than a simple identifier at the
4415 start of an attribute, and it wasn't a semicolon or the start of a
4416 block. Perhaps you terminated the parameter list of the previous
4417 attribute too soon. See L<attributes>.
4419 =item Unterminated attribute parameter in attribute list
4421 (F) The lexer saw an opening (left) parenthesis character while parsing
4422 an attribute list, but the matching closing (right) parenthesis
4423 character was not found. You may need to add (or remove) a backslash
4424 character to get your parentheses to balance. See L<attributes>.
4426 =item Unterminated compressed integer
4428 (F) An argument to unpack("w",...) was incompatible with the BER
4429 compressed integer format and could not be converted to an integer.
4430 See L<perlfunc/pack>.
4432 =item Unterminated verb pattern in regex; marked by <-- HERE in m/%s/
4434 (F) You used a pattern of the form C<(*VERB)> but did not terminate
4435 the pattern with a C<)>. Fix the pattern and retry.
4437 =item Unterminated verb pattern argument in regex; marked by <-- HERE in m/%s/
4439 (F) You used a pattern of the form C<(*VERB:ARG)> but did not terminate
4440 the pattern with a C<)>. Fix the pattern and retry.
4443 =item Unterminated <> operator
4445 (F) The lexer saw a left angle bracket in a place where it was expecting
4446 a term, so it's looking for the corresponding right angle bracket, and
4447 not finding it. Chances are you left some needed parentheses out
4448 earlier in the line, and you really meant a "less than".
4450 =item untie attempted while %d inner references still exist
4452 (W untie) A copy of the object returned from C<tie> (or C<tied>) was
4453 still valid when C<untie> was called.
4455 =item Usage: POSIX::%s(%s)
4457 (F) You called a POSIX function with incorrect arguments.
4458 See L<POSIX/FUNCTIONS> for more information.
4460 =item Usage: Win32::%s(%s)
4462 (F) You called a Win32 function with incorrect arguments.
4463 See L<Win32> for more information.
4465 =item Useless (?-%s) - don't use /%s modifier in regex; marked by <-- HERE in m/%s/
4467 (W regexp) You have used an internal modifier such as (?-o) that has no
4468 meaning unless removed from the entire regexp:
4470 if ($string =~ /(?-o)$pattern/o) { ... }
4474 if ($string =~ /$pattern/) { ... }
4476 The <-- HERE shows in the regular expression about
4477 where the problem was discovered. See L<perlre>.
4479 =item Useless localization of %s
4481 (W syntax) The localization of lvalues such as C<local($x=10)> is
4482 legal, but in fact the local() currently has no effect. This may change at
4483 some point in the future, but in the meantime such code is discouraged.
4485 =item Useless (?%s) - use /%s modifier in regex; marked by <-- HERE in m/%s/
4487 (W regexp) You have used an internal modifier such as (?o) that has no
4488 meaning unless applied to the entire regexp:
4490 if ($string =~ /(?o)$pattern/) { ... }
4494 if ($string =~ /$pattern/o) { ... }
4496 The <-- HERE shows in the regular expression about
4497 where the problem was discovered. See L<perlre>.
4499 =item Useless use of %s in void context
4501 (W void) You did something without a side effect in a context that does
4502 nothing with the return value, such as a statement that doesn't return a
4503 value from a block, or the left side of a scalar comma operator. Very
4504 often this points not to stupidity on your part, but a failure of Perl
4505 to parse your program the way you thought it would. For example, you'd
4506 get this if you mixed up your C precedence with Python precedence and
4511 when you meant to say
4513 ($one, $two) = (1, 2);
4515 Another common error is to use ordinary parentheses to construct a list
4516 reference when you should be using square or curly brackets, for
4521 when you should have said
4525 The square brackets explicitly turn a list value into a scalar value,
4526 while parentheses do not. So when a parenthesized list is evaluated in
4527 a scalar context, the comma is treated like C's comma operator, which
4528 throws away the left argument, which is not what you want. See
4529 L<perlref> for more on this.
4531 This warning will not be issued for numerical constants equal to 0 or 1
4532 since they are often used in statements like
4534 1 while sub_with_side_effects();
4536 String constants that would normally evaluate to 0 or 1 are warned
4539 =item Useless use of "re" pragma
4541 (W) You did C<use re;> without any arguments. That isn't very useful.
4543 =item Useless use of sort in scalar context
4545 (W void) You used sort in scalar context, as in :
4549 This is not very useful, and perl currently optimizes this away.
4551 =item Useless use of %s with no values
4553 (W syntax) You used the push() or unshift() function with no arguments
4554 apart from the array, like C<push(@x)> or C<unshift(@foo)>. That won't
4555 usually have any effect on the array, so is completely useless. It's
4556 possible in principle that push(@tied_array) could have some effect
4557 if the array is tied to a class which implements a PUSH method. If so,
4558 you can write it as C<push(@tied_array,())> to avoid this warning.
4560 =item "use" not allowed in expression
4562 (F) The "use" keyword is recognized and executed at compile time, and
4563 returns no useful value. See L<perlmod>.
4565 =item Use of bare << to mean <<"" is deprecated
4567 (D deprecated) You are now encouraged to use the explicitly quoted form
4568 if you wish to use an empty line as the terminator of the here-document.
4570 =item Use of chdir('') or chdir(undef) as chdir() deprecated
4572 (D deprecated) chdir() with no arguments is documented to change to
4573 $ENV{HOME} or $ENV{LOGDIR}. chdir(undef) and chdir('') share this
4574 behavior, but that has been deprecated. In future versions they
4577 Be careful to check that what you pass to chdir() is defined and not
4578 blank, else you might find yourself in your home directory.
4580 =item Use of /c modifier is meaningless in s///
4582 (W regexp) You used the /c modifier in a substitution. The /c
4583 modifier is not presently meaningful in substitutions.
4585 =item Use of /c modifier is meaningless without /g
4587 (W regexp) You used the /c modifier with a regex operand, but didn't
4588 use the /g modifier. Currently, /c is meaningful only when /g is
4589 used. (This may change in the future.)
4591 =item Use of freed value in iteration
4593 (F) Perhaps you modified the iterated array within the loop?
4594 This error is typically caused by code like the following:
4597 @a = () for (1,2,@a);
4599 You are not supposed to modify arrays while they are being iterated over.
4600 For speed and efficiency reasons, Perl internally does not do full
4601 reference-counting of iterated items, hence deleting such an item in the
4602 middle of an iteration causes Perl to see a freed value.
4604 =item Use of *glob{FILEHANDLE} is deprecated
4606 (D deprecated) You are now encouraged to use the shorter *glob{IO} form
4607 to access the filehandle slot within a typeglob.
4609 =item Use of /g modifier is meaningless in split
4611 (W regexp) You used the /g modifier on the pattern for a C<split>
4612 operator. Since C<split> always tries to match the pattern
4613 repeatedly, the C</g> has no effect.
4615 =item Use of implicit split to @_ is deprecated
4617 (D deprecated) It makes a lot of work for the compiler when you clobber
4618 a subroutine's argument list, so it's better if you assign the results
4619 of a split() explicitly to an array (or list).
4621 =item Use of inherited AUTOLOAD for non-method %s() is deprecated
4623 (D deprecated) As an (ahem) accidental feature, C<AUTOLOAD> subroutines
4624 are looked up as methods (using the C<@ISA> hierarchy) even when the
4625 subroutines to be autoloaded were called as plain functions (e.g.
4626 C<Foo::bar()>), not as methods (e.g. C<< Foo->bar() >> or C<<
4629 This bug will be rectified in future by using method lookup only for
4630 methods' C<AUTOLOAD>s. However, there is a significant base of existing
4631 code that may be using the old behavior. So, as an interim step, Perl
4632 currently issues an optional warning when non-methods use inherited
4635 The simple rule is: Inheritance will not work when autoloading
4636 non-methods. The simple fix for old code is: In any module that used
4637 to depend on inheriting C<AUTOLOAD> for non-methods from a base class
4638 named C<BaseClass>, execute C<*AUTOLOAD = \&BaseClass::AUTOLOAD> during
4641 In code that currently says C<use AutoLoader; @ISA = qw(AutoLoader);>
4642 you should remove AutoLoader from @ISA and change C<use AutoLoader;> to
4643 C<use AutoLoader 'AUTOLOAD';>.
4645 =item Use of %s in printf format not supported
4647 (F) You attempted to use a feature of printf that is accessible from
4648 only C. This usually means there's a better way to do it in Perl.
4650 =item Use of %s is deprecated
4652 (D deprecated) The construct indicated is no longer recommended for use,
4653 generally because there's a better way to do it, and also because the
4654 old way has bad side effects.
4656 =item Use of -l on filehandle %s
4658 (W io) A filehandle represents an opened file, and when you opened the file
4659 it already went past any symlink you are presumably trying to look for.
4660 The operation returned C<undef>. Use a filename instead.
4662 =item Use of "package" with no arguments is deprecated
4664 (D deprecated) You used the C<package> keyword without specifying a package
4665 name. So no namespace is current at all. Using this can cause many
4666 otherwise reasonable constructs to fail in baffling ways. C<use strict;>
4669 =item Use of reference "%s" as array index
4671 (W misc) You tried to use a reference as an array index; this probably
4672 isn't what you mean, because references in numerical context tend
4673 to be huge numbers, and so usually indicates programmer error.
4675 If you really do mean it, explicitly numify your reference, like so:
4676 C<$array[0+$ref]>. This warning is not given for overloaded objects,
4677 either, because you can overload the numification and stringification
4678 operators and then you assumedly know what you are doing.
4680 =item Use of reserved word "%s" is deprecated
4682 (D deprecated) The indicated bareword is a reserved word. Future
4683 versions of perl may use it as a keyword, so you're better off either
4684 explicitly quoting the word in a manner appropriate for its context of
4685 use, or using a different name altogether. The warning can be
4686 suppressed for subroutine names by either adding a C<&> prefix, or using
4687 a package qualifier, e.g. C<&our()>, or C<Foo::our()>.
4689 =item Use of tainted arguments in %s is deprecated
4691 (W taint, deprecated) You have supplied C<system()> or C<exec()> with multiple
4692 arguments and at least one of them is tainted. This used to be allowed
4693 but will become a fatal error in a future version of perl. Untaint your
4694 arguments. See L<perlsec>.
4696 =item Use of uninitialized value%s
4698 (W uninitialized) An undefined value was used as if it were already
4699 defined. It was interpreted as a "" or a 0, but maybe it was a mistake.
4700 To suppress this warning assign a defined value to your variables.
4702 To help you figure out what was undefined, perl will try to tell you the
4703 name of the variable (if any) that was undefined. In some cases it cannot
4704 do this, so it also tells you what operation you used the undefined value
4705 in. Note, however, that perl optimizes your program and the operation
4706 displayed in the warning may not necessarily appear literally in your
4707 program. For example, C<"that $foo"> is usually optimized into C<"that "
4708 . $foo>, and the warning will refer to the C<concatenation (.)> operator,
4709 even though there is no C<.> in your program.
4711 =item Using a hash as a reference is deprecated
4713 (D deprecated) You tried to use a hash as a reference, as in
4714 C<< %foo->{"bar"} >> or C<< %$ref->{"hello"} >>. Versions of perl <= 5.6.1
4715 used to allow this syntax, but shouldn't have. It is now deprecated, and will
4716 be removed in a future version.
4718 =item Using an array as a reference is deprecated
4720 (D deprecated) You tried to use an array as a reference, as in
4721 C<< @foo->[23] >> or C<< @$ref->[99] >>. Versions of perl <= 5.6.1 used to
4722 allow this syntax, but shouldn't have. It is now deprecated, and will be
4723 removed in a future version.
4725 =item UTF-16 surrogate %s
4727 (W utf8) You tried to generate half of an UTF-16 surrogate by
4728 requesting a Unicode character between the code points 0xD800 and
4729 0xDFFF (inclusive). That range is reserved exclusively for the use of
4730 UTF-16 encoding (by having two 16-bit UCS-2 characters); but Perl
4731 encodes its characters in UTF-8, so what you got is a very illegal
4732 character. If you really know what you are doing you can turn off
4733 this warning by C<no warnings 'utf8';>.
4735 =item Value of %s can be "0"; test with defined()
4737 (W misc) In a conditional expression, you used <HANDLE>, <*> (glob),
4738 C<each()>, or C<readdir()> as a boolean value. Each of these constructs
4739 can return a value of "0"; that would make the conditional expression
4740 false, which is probably not what you intended. When using these
4741 constructs in conditional expressions, test their values with the
4742 C<defined> operator.
4744 =item Value of CLI symbol "%s" too long
4746 (W misc) A warning peculiar to VMS. Perl tried to read the value of an
4747 %ENV element from a CLI symbol table, and found a resultant string
4748 longer than 1024 characters. The return value has been truncated to
4751 =item Variable "%s" is not available
4753 (W closure) During compilation, an inner named subroutine or eval is
4754 attempting to capture an outer lexical that is not currently available.
4755 This can happen for one of two reasons. First, the outer lexical may be
4756 declared in an outer anonymous subroutine that has not yet been created.
4757 (Remember that named subs are created at compile time, while anonymous
4758 subs are created at run-time.) For example,
4760 sub { my $a; sub f { $a } }
4762 At the time that f is created, it can't capture the current value of $a,
4763 since the anonymous subroutine hasn't been created yet. Conversely,
4764 the following won't give a warning since the anonymous subroutine has by
4765 now been created and is live:
4767 sub { my $a; eval 'sub f { $a }' }->();
4769 The second situation is caused by an eval accessing a variable that has
4770 gone out of scope, for example,
4778 Here, when the '$a' in the eval is being compiled, f() is not currently being
4779 executed, so its $a is not available for capture.
4781 =item Variable "%s" is not imported%s
4783 (F) While "use strict" in effect, you referred to a global variable that
4784 you apparently thought was imported from another module, because
4785 something else of the same name (usually a subroutine) is exported by
4786 that module. It usually means you put the wrong funny character on the
4787 front of your variable.
4789 =item Variable length lookbehind not implemented in regex; marked by <-- HERE in m/%s/
4791 (F) Lookbehind is allowed only for subexpressions whose length is fixed and
4792 known at compile time. The <-- HERE shows in the regular expression about
4793 where the problem was discovered. See L<perlre>.
4795 =item Variable length character upgraded in print
4797 (W utf8) Perl met a variable length character that is not marked with
4798 Unicode in the output, but the output layer (like the C<:utf8> layer) does
4799 not expect that. (A variable length character is defined by having
4800 different memory representations between the native encoding (ISO-8859-1
4801 or single-byte EBCDIC) and perl's Unicode encoding (UTF-8 or UTF-EBCDIC).)
4802 Perl assumes any strings that are not marked as Unicode to be encoded in
4803 the native encoding, and implicitly converts (upgrades) them into perl's
4804 Unicode encoding on print. If you had intended to treat them as Unicode
4805 strings, you might have failed to cope with them properly.
4807 =item "%s" variable %s masks earlier declaration in same %s
4809 (W misc) A "my" or "our" variable has been redeclared in the current
4810 scope or statement, effectively eliminating all access to the previous
4811 instance. This is almost always a typographical error. Note that the
4812 earlier variable will still exist until the end of the scope or until
4813 all closure referents to it are destroyed.
4815 =item Variable syntax
4817 (A) You've accidentally run your script through B<csh> instead
4818 of Perl. Check the #! line, or manually feed your script into
4821 =item Variable "%s" will not stay shared
4823 (W closure) An inner (nested) I<named> subroutine is referencing a
4824 lexical variable defined in an outer named subroutine.
4826 When the inner subroutine is called, it will see the value of
4827 the outer subroutine's variable as it was before and during the *first*
4828 call to the outer subroutine; in this case, after the first call to the
4829 outer subroutine is complete, the inner and outer subroutines will no
4830 longer share a common value for the variable. In other words, the
4831 variable will no longer be shared.
4833 This problem can usually be solved by making the inner subroutine
4834 anonymous, using the C<sub {}> syntax. When inner anonymous subs that
4835 reference variables in outer subroutines are created, they
4836 are automatically rebound to the current values of such variables.
4838 =item Verb pattern '%s' has a mandatory argument in regex; marked by <-- HERE in m/%s/
4840 (F) You used a verb pattern that requires an argument. Supply an argument
4841 or check that you are using the right verb.
4843 =item Verb pattern '%s' may not have an argument in regex; marked by <-- HERE in m/%s/
4845 (F) You used a verb pattern that is not allowed an argument. Remove the
4846 argument or check that you are using the right verb.
4848 =item Version number must be a constant number
4850 (P) The attempt to translate a C<use Module n.n LIST> statement into
4851 its equivalent C<BEGIN> block found an internal inconsistency with
4854 =item Version string '%s' contains invalid data; ignoring: '%s'
4856 (W misc) The version string contains invalid characters at the end, which
4859 =item v-string in use/require is non-portable
4861 (W portable) The use of v-strings is non-portable to older, pre-5.6, Perls.
4862 If you want your scripts to be backward portable, use the floating
4863 point version number: for example, instead of C<use 5.6.1> say
4864 C<use 5.006_001>. This of course won't help: the older Perls
4865 won't suddenly start understanding newer features, but at least
4866 they will show a sensible error message indicating the required
4869 =item Warning: something's wrong
4871 (W) You passed warn() an empty string (the equivalent of C<warn "">) or
4872 you called it with no args and C<$_> was empty.
4874 =item Warning: unable to close filehandle %s properly
4876 (S) The implicit close() done by an open() got an error indication on
4877 the close(). This usually indicates your file system ran out of disk
4880 =item Warning: Use of "%s" without parentheses is ambiguous
4882 (S ambiguous) You wrote a unary operator followed by something that
4883 looks like a binary operator that could also have been interpreted as a
4884 term or unary operator. For instance, if you know that the rand
4885 function has a default argument of 1.0, and you write
4889 you may THINK you wrote the same thing as
4893 but in actual fact, you got
4897 So put in parentheses to say what you really mean.
4899 =item Wide character in %s
4901 (W utf8) Perl met a wide character (>255) when it wasn't expecting
4902 one. This warning is by default on for I/O (like print). The easiest
4903 way to quiet this warning is simply to add the C<:utf8> layer to the
4904 output, e.g. C<binmode STDOUT, ':utf8'>. Another way to turn off the
4905 warning is to add C<no warnings 'utf8';> but that is often closer to
4906 cheating. In general, you are supposed to explicitly mark the
4907 filehandle with an encoding, see L<open> and L<perlfunc/binmode>.
4909 =item Within []-length '%c' not allowed
4911 (F) The count in the (un)pack template may be replaced by C<[TEMPLATE]> only if
4912 C<TEMPLATE> always matches the same amount of packed bytes that can be
4913 determined from the template alone. This is not possible if it contains an
4914 of the codes @, /, U, u, w or a *-length. Redesign the template.
4916 =item write() on closed filehandle %s
4918 (W closed) The filehandle you're writing to got itself closed sometime
4919 before now. Check your control flow.
4921 =item %s "\x%s" does not map to Unicode
4923 When reading in different encodings Perl tries to map everything
4924 into Unicode characters. The bytes you read in are not legal in
4925 this encoding, for example
4927 utf8 "\xE4" does not map to Unicode
4929 if you try to read in the a-diaereses Latin-1 as UTF-8.
4931 =item 'X' outside of string
4933 (F) You had a (un)pack template that specified a relative position before
4934 the beginning of the string being (un)packed. See L<perlfunc/pack>.
4936 =item 'x' outside of string in unpack
4938 (F) You had a pack template that specified a relative position after
4939 the end of the string being unpacked. See L<perlfunc/pack>.
4941 =item YOU HAVEN'T DISABLED SET-ID SCRIPTS IN THE KERNEL YET!
4943 (F) And you probably never will, because you probably don't have the
4944 sources to your kernel, and your vendor probably doesn't give a rip
4945 about what you want. Your best bet is to put a setuid C wrapper around
4948 =item You need to quote "%s"
4950 (W syntax) You assigned a bareword as a signal handler name.
4951 Unfortunately, you already have a subroutine of that name declared,
4952 which means that Perl 5 will try to call the subroutine when the
4953 assignment is executed, which is probably not what you want. (If it IS
4954 what you want, put an & in front.)
4956 =item Your random numbers are not that random
4958 (F) When trying to initialise the random seed for hashes, Perl could
4959 not get any randomness out of your system. This usually indicates
4960 Something Very Wrong.