3 perldiag - various Perl diagnostics
7 These messages are classified as follows (listed in increasing order of
10 (W) A warning (optional).
11 (D) A deprecation (enabled by default).
12 (S) A severe warning (enabled by default).
13 (F) A fatal error (trappable).
14 (P) An internal error you should never see (trappable).
15 (X) A very fatal error (nontrappable).
16 (A) An alien error message (not generated by Perl).
18 The majority of messages from the first three classifications above
19 (W, D & S) can be controlled using the C<warnings> pragma.
21 If a message can be controlled by the C<warnings> pragma, its warning
22 category is included with the classification letter in the description
25 Optional warnings are enabled by using the C<warnings> pragma or the B<-w>
26 and B<-W> switches. Warnings may be captured by setting C<$SIG{__WARN__}>
27 to a reference to a routine that will be called on each warning instead
28 of printing it. See L<perlvar>.
30 Severe warnings are always enabled, unless they are explicitly disabled
31 with the C<warnings> pragma or the B<-X> switch.
33 Trappable errors may be trapped using the eval operator. See
34 L<perlfunc/eval>. In almost all cases, warnings may be selectively
35 disabled or promoted to fatal errors using the C<warnings> pragma.
38 The messages are in alphabetical order, without regard to upper or
39 lower-case. Some of these messages are generic. Spots that vary are
40 denoted with a %s or other printf-style escape. These escapes are
41 ignored by the alphabetical order, as are all characters other than
42 letters. To look up your message, just ignore anything that is not a
47 =item accept() on closed socket %s
49 (W closed) You tried to do an accept on a closed socket. Did you forget
50 to check the return value of your socket() call? See
53 =item Allocation too large: %lx
55 (X) You can't allocate more than 64K on an MS-DOS machine.
57 =item '%c' allowed only after types %s
59 (F) The modifiers '!', '<' and '>' are allowed in pack() or unpack() only
60 after certain types. See L<perlfunc/pack>.
62 =item Ambiguous call resolved as CORE::%s(), qualify as such or use &
64 (W ambiguous) A subroutine you have declared has the same name as a Perl
65 keyword, and you have used the name without qualification for calling
66 one or the other. Perl decided to call the builtin because the
67 subroutine is not imported.
69 To force interpretation as a subroutine call, either put an ampersand
70 before the subroutine name, or qualify the name with its package.
71 Alternatively, you can import the subroutine (or pretend that it's
72 imported with the C<use subs> pragma).
74 To silently interpret it as the Perl operator, use the C<CORE::> prefix
75 on the operator (e.g. C<CORE::log($x)>) or declare the subroutine
76 to be an object method (see L<perlsub/"Subroutine Attributes"> or
79 =item Ambiguous range in transliteration operator
81 (F) You wrote something like C<tr/a-z-0//> which doesn't mean anything at
82 all. To include a C<-> character in a transliteration, put it either
83 first or last. (In the past, C<tr/a-z-0//> was synonymous with
84 C<tr/a-y//>, which was probably not what you would have expected.)
86 =item Ambiguous use of %s resolved as %s
88 (W ambiguous)(S) You said something that may not be interpreted the way
89 you thought. Normally it's pretty easy to disambiguate it by supplying
90 a missing quote, operator, parenthesis pair or declaration.
92 =item '|' and '<' may not both be specified on command line
94 (F) An error peculiar to VMS. Perl does its own command line
95 redirection, and found that STDIN was a pipe, and that you also tried to
96 redirect STDIN using '<'. Only one STDIN stream to a customer, please.
98 =item '|' and '>' may not both be specified on command line
100 (F) An error peculiar to VMS. Perl does its own command line
101 redirection, and thinks you tried to redirect stdout both to a file and
102 into a pipe to another command. You need to choose one or the other,
103 though nothing's stopping you from piping into a program or Perl script
104 which 'splits' output into two streams, such as
106 open(OUT,">$ARGV[0]") or die "Can't write to $ARGV[0]: $!";
113 =item Applying %s to %s will act on scalar(%s)
115 (W misc) The pattern match (C<//>), substitution (C<s///>), and
116 transliteration (C<tr///>) operators work on scalar values. If you apply
117 one of them to an array or a hash, it will convert the array or hash to
118 a scalar value -- the length of an array, or the population info of a
119 hash -- and then work on that scalar value. This is probably not what
120 you meant to do. See L<perlfunc/grep> and L<perlfunc/map> for
123 =item Args must match #! line
125 (F) The setuid emulator requires that the arguments Perl was invoked
126 with match the arguments specified on the #! line. Since some systems
127 impose a one-argument limit on the #! line, try combining switches;
128 for example, turn C<-w -U> into C<-wU>.
130 =item Arg too short for msgsnd
132 (F) msgsnd() requires a string at least as long as sizeof(long).
134 =item %s argument is not a HASH or ARRAY element or a subroutine
136 (F) The argument to exists() must be a hash or array element or a
137 subroutine with an ampersand, such as:
143 =item %s argument is not a HASH or ARRAY element or slice
145 (F) The argument to delete() must be either a hash or array element,
151 or a hash or array slice, such as:
153 @foo[$bar, $baz, $xyzzy]
154 @{$ref->[12]}{"susie", "queue"}
156 =item %s argument is not a subroutine name
158 (F) The argument to exists() for C<exists &sub> must be a subroutine
159 name, and not a subroutine call. C<exists &sub()> will generate this
162 =item Argument "%s" isn't numeric%s
164 (W numeric) The indicated string was fed as an argument to an operator
165 that expected a numeric value instead. If you're fortunate the message
166 will identify which operator was so unfortunate.
168 =item Argument list not closed for PerlIO layer "%s"
170 (W layer) When pushing a layer with arguments onto the Perl I/O system you
171 forgot the ) that closes the argument list. (Layers take care of transforming
172 data between external and internal representations.) Perl stopped parsing
173 the layer list at this point and did not attempt to push this layer.
174 If your program didn't explicitly request the failing operation, it may be
175 the result of the value of the environment variable PERLIO.
177 =item Array @%s missing the @ in argument %d of %s()
179 (D deprecated) Really old Perl let you omit the @ on array names in some
180 spots. This is now heavily deprecated.
182 =item assertion botched: %s
184 (P) The malloc package that comes with Perl had an internal failure.
186 =item Assertion failed: file "%s"
188 (P) A general assertion failed. The file in question must be examined.
190 =item Assignment to both a list and a scalar
192 (F) If you assign to a conditional operator, the 2nd and 3rd arguments
193 must either both be scalars or both be lists. Otherwise Perl won't
194 know which context to supply to the right side.
196 =item A thread exited while %d threads were running
198 (W threads)(S) When using threaded Perl, a thread (not necessarily the main
199 thread) exited while there were still other threads running.
200 Usually it's a good idea to first collect the return values of the
201 created threads by joining them, and only then exit from the main
202 thread. See L<threads>.
204 =item Attempt to access disallowed key '%s' in a restricted hash
206 (F) The failing code has attempted to get or set a key which is not in
207 the current set of allowed keys of a restricted hash.
209 =item Attempt to bless into a reference
211 (F) The CLASSNAME argument to the bless() operator is expected to be
212 the name of the package to bless the resulting object into. You've
213 supplied instead a reference to something: perhaps you wrote
219 bless $self, ref($proto) || $proto;
221 If you actually want to bless into the stringified version
222 of the reference supplied, you need to stringify it yourself, for
225 bless $self, "$proto";
227 =item Attempt to delete disallowed key '%s' from a restricted hash
229 (F) The failing code attempted to delete from a restricted hash a key
230 which is not in its key set.
232 =item Attempt to delete readonly key '%s' from a restricted hash
234 (F) The failing code attempted to delete a key whose value has been
235 declared readonly from a restricted hash.
237 =item Attempt to free non-arena SV: 0x%lx
239 (P internal) All SV objects are supposed to be allocated from arenas
240 that will be garbage collected on exit. An SV was discovered to be
241 outside any of those arenas.
243 =item Attempt to free nonexistent shared string
245 (P internal) Perl maintains a reference counted internal table of
246 strings to optimize the storage and access of hash keys and other
247 strings. This indicates someone tried to decrement the reference count
248 of a string that can no longer be found in the table.
250 =item Attempt to free temp prematurely
252 (W debugging) Mortalized values are supposed to be freed by the
253 free_tmps() routine. This indicates that something else is freeing the
254 SV before the free_tmps() routine gets a chance, which means that the
255 free_tmps() routine will be freeing an unreferenced scalar when it does
258 =item Attempt to free unreferenced glob pointers
260 (P internal) The reference counts got screwed up on symbol aliases.
262 =item Attempt to free unreferenced scalar
264 (W internal) Perl went to decrement the reference count of a scalar to
265 see if it would go to 0, and discovered that it had already gone to 0
266 earlier, and should have been freed, and in fact, probably was freed.
267 This could indicate that SvREFCNT_dec() was called too many times, or
268 that SvREFCNT_inc() was called too few times, or that the SV was
269 mortalized when it shouldn't have been, or that memory has been
272 =item Attempt to join self
274 (F) You tried to join a thread from within itself, which is an
275 impossible task. You may be joining the wrong thread, or you may need
276 to move the join() to some other thread.
278 =item Attempt to pack pointer to temporary value
280 (W pack) You tried to pass a temporary value (like the result of a
281 function, or a computed expression) to the "p" pack() template. This
282 means the result contains a pointer to a location that could become
283 invalid anytime, even before the end of the current statement. Use
284 literals or global values as arguments to the "p" pack() template to
287 =item Attempt to reload %s aborted.
289 (F) You tried to load a file with C<use> or C<require> that failed to
290 compile once already. Perl will not try to compile this file again
291 unless you delete its entry from %INC. See L<perlfunc/require> and
294 =item Attempt to set length of freed array
296 (W) You tried to set the length of an array which has been freed. You
297 can do this by storing a reference to the scalar representing the last index
298 of an array and later assigning through that reference. For example
300 $r = do {my @a; \$#a};
303 =item Attempt to use reference as lvalue in substr
305 (W substr) You supplied a reference as the first argument to substr()
306 used as an lvalue, which is pretty strange. Perhaps you forgot to
307 dereference it first. See L<perlfunc/substr>.
309 =item Attribute "locked" is deprecated
311 (D deprecated) You have used the attributes pragam to modify the "locked"
312 attribute on a code reference. The :locked attribute is obsolete, has had no
313 effect since 5005 threads were removed, and will be removed in the next major
316 =item Attribute "unique" is deprecated
318 (D deprecated) You have used the attributes pragam to modify the "unique"
319 attribute on an array, hash or scalar reference. The :unique attribute has
320 had no effect since Perl 5.8.8, and will be removed in the next major
323 =item Bad arg length for %s, is %d, should be %d
325 (F) You passed a buffer of the wrong size to one of msgctl(), semctl()
326 or shmctl(). In C parlance, the correct sizes are, respectively,
327 S<sizeof(struct msqid_ds *)>, S<sizeof(struct semid_ds *)>, and
328 S<sizeof(struct shmid_ds *)>.
330 =item Bad evalled substitution pattern
332 (F) You've used the C</e> switch to evaluate the replacement for a
333 substitution, but perl found a syntax error in the code to evaluate,
334 most likely an unexpected right brace '}'.
336 =item Bad filehandle: %s
338 (F) A symbol was passed to something wanting a filehandle, but the
339 symbol has no filehandle associated with it. Perhaps you didn't do an
340 open(), or did it in another package.
342 =item Bad free() ignored
344 (S malloc) An internal routine called free() on something that had never
345 been malloc()ed in the first place. Mandatory, but can be disabled by
346 setting environment variable C<PERL_BADFREE> to 0.
348 This message can be seen quite often with DB_File on systems with "hard"
349 dynamic linking, like C<AIX> and C<OS/2>. It is a bug of C<Berkeley DB>
350 which is left unnoticed if C<DB> uses I<forgiving> system malloc().
354 (P) One of the internal hash routines was passed a null HV pointer.
356 =item Badly placed ()'s
358 (A) You've accidentally run your script through B<csh> instead
359 of Perl. Check the #! line, or manually feed your script into
362 =item Bad name after %s::
364 (F) You started to name a symbol by using a package prefix, and then
365 didn't finish the symbol. In particular, you can't interpolate outside
374 $sym = "mypack::$var";
376 =item Bad plugin affecting keyword '%s'
378 (F) An extension using the keyword plugin mechanism violated the
381 =item Bad realloc() ignored
383 (S malloc) An internal routine called realloc() on something that had
384 never been malloc()ed in the first place. Mandatory, but can be disabled
385 by setting environment variable C<PERL_BADFREE> to 1.
387 =item Bad symbol for array
389 (P) An internal request asked to add an array entry to something that
390 wasn't a symbol table entry.
392 =item Bad symbol for dirhandle
394 (P) An internal request asked to add a dirhandle entry to something
395 that wasn't a symbol table entry.
398 =item Bad symbol for filehandle
400 (P) An internal request asked to add a filehandle entry to something
401 that wasn't a symbol table entry.
403 =item Bad symbol for hash
405 (P) An internal request asked to add a hash entry to something that
406 wasn't a symbol table entry.
408 =item Bareword found in conditional
410 (W bareword) The compiler found a bareword where it expected a
411 conditional, which often indicates that an || or && was parsed as part
412 of the last argument of the previous construct, for example:
416 It may also indicate a misspelled constant that has been interpreted as
419 use constant TYPO => 1;
420 if (TYOP) { print "foo" }
422 The C<strict> pragma is useful in avoiding such errors.
424 =item Bareword "%s" not allowed while "strict subs" in use
426 (F) With "strict subs" in use, a bareword is only allowed as a
427 subroutine identifier, in curly brackets or to the left of the "=>"
428 symbol. Perhaps you need to predeclare a subroutine?
430 =item Bareword "%s" refers to nonexistent package
432 (W bareword) You used a qualified bareword of the form C<Foo::>, but the
433 compiler saw no other uses of that namespace before that point. Perhaps
434 you need to predeclare a package?
436 =item BEGIN failed--compilation aborted
438 (F) An untrapped exception was raised while executing a BEGIN
439 subroutine. Compilation stops immediately and the interpreter is
442 =item BEGIN not safe after errors--compilation aborted
444 (F) Perl found a C<BEGIN {}> subroutine (or a C<use> directive, which
445 implies a C<BEGIN {}>) after one or more compilation errors had already
446 occurred. Since the intended environment for the C<BEGIN {}> could not
447 be guaranteed (due to the errors), and since subsequent code likely
448 depends on its correct operation, Perl just gave up.
450 =item \1 better written as $1
452 (W syntax) Outside of patterns, backreferences live on as variables.
453 The use of backslashes is grandfathered on the right-hand side of a
454 substitution, but stylistically it's better to use the variable form
455 because other Perl programmers will expect it, and it works better if
456 there are more than 9 backreferences.
458 =item Binary number > 0b11111111111111111111111111111111 non-portable
460 (W portable) The binary number you specified is larger than 2**32-1
461 (4294967295) and therefore non-portable between systems. See
462 L<perlport> for more on portability concerns.
464 =item bind() on closed socket %s
466 (W closed) You tried to do a bind on a closed socket. Did you forget to
467 check the return value of your socket() call? See L<perlfunc/bind>.
469 =item binmode() on closed filehandle %s
471 (W unopened) You tried binmode() on a filehandle that was never opened.
472 Check you control flow and number of arguments.
474 =item Bit vector size > 32 non-portable
476 (W portable) Using bit vector sizes larger than 32 is non-portable.
478 =item Bizarre copy of %s in %s
480 (P) Perl detected an attempt to copy an internal value that is not
483 =item Buffer overflow in prime_env_iter: %s
485 (W internal) A warning peculiar to VMS. While Perl was preparing to
486 iterate over %ENV, it encountered a logical name or symbol definition
487 which was too long, so it was truncated to the string shown.
489 =item Callback called exit
491 (F) A subroutine invoked from an external package via call_sv()
492 exited by calling exit.
494 =item %s() called too early to check prototype
496 (W prototype) You've called a function that has a prototype before the
497 parser saw a definition or declaration for it, and Perl could not check
498 that the call conforms to the prototype. You need to either add an
499 early prototype declaration for the subroutine in question, or move the
500 subroutine definition ahead of the call to get proper prototype
501 checking. Alternatively, if you are certain that you're calling the
502 function correctly, you may put an ampersand before the name to avoid
503 the warning. See L<perlsub>.
505 =item Cannot compress integer in pack
507 (F) An argument to pack("w",...) was too large to compress. The BER
508 compressed integer format can only be used with positive integers, and you
509 attempted to compress Infinity or a very large number (> 1e308).
510 See L<perlfunc/pack>.
512 =item Cannot compress negative numbers in pack
514 (F) An argument to pack("w",...) was negative. The BER compressed integer
515 format can only be used with positive integers. See L<perlfunc/pack>.
517 =item Cannot convert a reference to %s to typeglob
519 (F) You manipulated Perl's symbol table directly, stored a reference in it,
520 then tried to access that symbol via conventional Perl syntax. The access
521 triggers Perl to autovivify that typeglob, but it there is no legal conversion
522 from that type of reference to a typeglob.
524 =item Cannot copy to %s in %s
526 (P) Perl detected an attempt to copy a value to an internal type that cannot
527 be directly assigned not.
529 =item Can only compress unsigned integers in pack
531 (F) An argument to pack("w",...) was not an integer. The BER compressed
532 integer format can only be used with positive integers, and you attempted
533 to compress something else. See L<perlfunc/pack>.
535 =item Can't bless non-reference value
537 (F) Only hard references may be blessed. This is how Perl "enforces"
538 encapsulation of objects. See L<perlobj>.
540 =item Can't "break" in a loop topicalizer
542 (F) You called C<break>, but you're in a C<foreach> block rather than
543 a C<given> block. You probably meant to use C<next> or C<last>.
545 =item Can't "break" outside a given block
547 (F) You called C<break>, but you're not inside a C<given> block.
549 =item Can't call method "%s" in empty package "%s"
551 (F) You called a method correctly, and it correctly indicated a package
552 functioning as a class, but that package doesn't have ANYTHING defined
553 in it, let alone methods. See L<perlobj>.
555 =item Can't call method "%s" on an undefined value
557 (F) You used the syntax of a method call, but the slot filled by the
558 object reference or package name contains an undefined value. Something
559 like this will reproduce the error:
562 process $BADREF 1,2,3;
563 $BADREF->process(1,2,3);
565 =item Can't call method "%s" on unblessed reference
567 (F) A method call must know in what package it's supposed to run. It
568 ordinarily finds this out from the object reference you supply, but you
569 didn't supply an object reference in this case. A reference isn't an
570 object reference until it has been blessed. See L<perlobj>.
572 =item Can't call method "%s" without a package or object reference
574 (F) You used the syntax of a method call, but the slot filled by the
575 object reference or package name contains an expression that returns a
576 defined value which is neither an object reference nor a package name.
577 Something like this will reproduce the error:
580 process $BADREF 1,2,3;
581 $BADREF->process(1,2,3);
583 =item Can't chdir to %s
585 (F) You called C<perl -x/foo/bar>, but C</foo/bar> is not a directory
586 that you can chdir to, possibly because it doesn't exist.
588 =item Can't check filesystem of script "%s" for nosuid
590 (P) For some reason you can't check the filesystem of the script for
593 =item Can't coerce array into hash
595 (F) You used an array where a hash was expected, but the array has no
596 information on how to map from keys to array indices. You can do that
597 only with arrays that have a hash reference at index 0.
599 =item Can't coerce %s to integer in %s
601 (F) Certain types of SVs, in particular real symbol table entries
602 (typeglobs), can't be forced to stop being what they are. So you can't
612 but then $foo no longer contains a glob.
614 =item Can't coerce %s to number in %s
616 (F) Certain types of SVs, in particular real symbol table entries
617 (typeglobs), can't be forced to stop being what they are.
619 =item Can't coerce %s to string in %s
621 (F) Certain types of SVs, in particular real symbol table entries
622 (typeglobs), can't be forced to stop being what they are.
624 =item Can't "continue" outside a when block
626 (F) You called C<continue>, but you're not inside a C<when>
629 =item Can't create pipe mailbox
631 (P) An error peculiar to VMS. The process is suffering from exhausted
632 quotas or other plumbing problems.
634 =item Can't declare class for non-scalar %s in "%s"
636 (F) Currently, only scalar variables can be declared with a specific
637 class qualifier in a "my", "our" or "state" declaration. The semantics may be
638 extended for other types of variables in future.
640 =item Can't declare %s in "%s"
642 (F) Only scalar, array, and hash variables may be declared as "my", "our" or
643 "state" variables. They must have ordinary identifiers as names.
645 =item Can't do inplace edit: %s is not a regular file
647 (S inplace) You tried to use the B<-i> switch on a special file, such as
648 a file in /dev, or a FIFO. The file was ignored.
650 =item Can't do inplace edit on %s: %s
652 (S inplace) The creation of the new file failed for the indicated
655 =item Can't do inplace edit without backup
657 (F) You're on a system such as MS-DOS that gets confused if you try
658 reading from a deleted (but still opened) file. You have to say
659 C<-i.bak>, or some such.
661 =item Can't do inplace edit: %s would not be unique
663 (S inplace) Your filesystem does not support filenames longer than 14
664 characters and Perl was unable to create a unique filename during
665 inplace editing with the B<-i> switch. The file was ignored.
667 =item Can't do {n,m} with n > m in regex; marked by <-- HERE in m/%s/
669 (F) Minima must be less than or equal to maxima. If you really want your
670 regexp to match something 0 times, just put {0}. The <-- HERE shows in the
671 regular expression about where the problem was discovered. See L<perlre>.
673 =item Can't do waitpid with flags
675 (F) This machine doesn't have either waitpid() or wait4(), so only
676 waitpid() without flags is emulated.
678 =item Can't emulate -%s on #! line
680 (F) The #! line specifies a switch that doesn't make sense at this
681 point. For example, it'd be kind of silly to put a B<-x> on the #!
684 =item Can't %s %s-endian %ss on this platform
686 (F) Your platform's byte-order is neither big-endian nor little-endian,
687 or it has a very strange pointer size. Packing and unpacking big- or
688 little-endian floating point values and pointers may not be possible.
689 See L<perlfunc/pack>.
691 =item Can't exec "%s": %s
693 (W exec) A system(), exec(), or piped open call could not execute the
694 named program for the indicated reason. Typical reasons include: the
695 permissions were wrong on the file, the file wasn't found in
696 C<$ENV{PATH}>, the executable in question was compiled for another
697 architecture, or the #! line in a script points to an interpreter that
698 can't be run for similar reasons. (Or maybe your system doesn't support
703 (F) Perl was trying to execute the indicated program for you because
704 that's what the #! line said. If that's not what you wanted, you may
705 need to mention "perl" on the #! line somewhere.
707 =item Can't execute %s
709 (F) You used the B<-S> switch, but the copies of the script to execute
710 found in the PATH did not have correct permissions.
712 =item Can't find an opnumber for "%s"
714 (F) A string of a form C<CORE::word> was given to prototype(), but there
715 is no builtin with the name C<word>.
717 =item Can't find %s character property "%s"
719 (F) You used C<\p{}> or C<\P{}> but the character property by that name
720 could not be found. Maybe you misspelled the name of the property
721 (remember that the names of character properties consist only of
722 alphanumeric characters), or maybe you forgot the C<Is> or C<In> prefix?
724 =item Can't find label %s
726 (F) You said to goto a label that isn't mentioned anywhere that it's
727 possible for us to go to. See L<perlfunc/goto>.
729 =item Can't find %s on PATH
731 (F) You used the B<-S> switch, but the script to execute could not be
734 =item Can't find %s on PATH, '.' not in PATH
736 (F) You used the B<-S> switch, but the script to execute could not be
737 found in the PATH, or at least not with the correct permissions. The
738 script exists in the current directory, but PATH prohibits running it.
740 =item Can't find string terminator %s anywhere before EOF
742 (F) Perl strings can stretch over multiple lines. This message means
743 that the closing delimiter was omitted. Because bracketed quotes count
744 nesting levels, the following is missing its final parenthesis:
746 print q(The character '(' starts a side comment.);
748 If you're getting this error from a here-document, you may have included
749 unseen whitespace before or after your closing tag. A good programmer's
750 editor will have a way to help you find these characters.
752 =item Can't find Unicode property definition "%s"
754 (F) You may have tried to use C<\p> which means a Unicode property (for
755 example C<\p{Lu}> is all uppercase letters). If you did mean to use a
756 Unicode property, see L<perlunicode> for the list of known properties.
757 If you didn't mean to use a Unicode property, escape the C<\p>, either
758 by C<\\p> (just the C<\p>) or by C<\Q\p> (the rest of the string, until
763 (F) A fatal error occurred while trying to fork while opening a
766 =item Can't fork, trying again in 5 seconds
768 (W pipe) A fork in a piped open failed with EAGAIN and will be retried
771 =item Can't get filespec - stale stat buffer?
773 (S) A warning peculiar to VMS. This arises because of the difference
774 between access checks under VMS and under the Unix model Perl assumes.
775 Under VMS, access checks are done by filename, rather than by bits in
776 the stat buffer, so that ACLs and other protections can be taken into
777 account. Unfortunately, Perl assumes that the stat buffer contains all
778 the necessary information, and passes it, instead of the filespec, to
779 the access checking routine. It will try to retrieve the filespec using
780 the device name and FID present in the stat buffer, but this works only
781 if you haven't made a subsequent call to the CRTL stat() routine,
782 because the device name is overwritten with each call. If this warning
783 appears, the name lookup failed, and the access checking routine gave up
784 and returned FALSE, just to be conservative. (Note: The access checking
785 routine knows about the Perl C<stat> operator and file tests, so you
786 shouldn't ever see this warning in response to a Perl command; it arises
787 only if some internal code takes stat buffers lightly.)
789 =item Can't get pipe mailbox device name
791 (P) An error peculiar to VMS. After creating a mailbox to act as a
792 pipe, Perl can't retrieve its name for later use.
794 =item Can't get SYSGEN parameter value for MAXBUF
796 (P) An error peculiar to VMS. Perl asked $GETSYI how big you want your
797 mailbox buffers to be, and didn't get an answer.
799 =item Can't "goto" into the middle of a foreach loop
801 (F) A "goto" statement was executed to jump into the middle of a foreach
802 loop. You can't get there from here. See L<perlfunc/goto>.
804 =item Can't "goto" out of a pseudo block
806 (F) A "goto" statement was executed to jump out of what might look like
807 a block, except that it isn't a proper block. This usually occurs if
808 you tried to jump out of a sort() block or subroutine, which is a no-no.
809 See L<perlfunc/goto>.
811 =item Can't goto subroutine from a sort sub (or similar callback)
813 (F) The "goto subroutine" call can't be used to jump out of the
814 comparison sub for a sort(), or from a similar callback (such
815 as the reduce() function in List::Util).
817 =item Can't goto subroutine from an eval-%s
819 (F) The "goto subroutine" call can't be used to jump out of an eval
822 =item Can't goto subroutine outside a subroutine
824 (F) The deeply magical "goto subroutine" call can only replace one
825 subroutine call for another. It can't manufacture one out of whole
826 cloth. In general you should be calling it out of only an AUTOLOAD
827 routine anyway. See L<perlfunc/goto>.
829 =item Can't ignore signal CHLD, forcing to default
831 (W signal) Perl has detected that it is being run with the SIGCHLD
832 signal (sometimes known as SIGCLD) disabled. Since disabling this
833 signal will interfere with proper determination of exit status of child
834 processes, Perl has reset the signal to its default value. This
835 situation typically indicates that the parent program under which Perl
836 may be running (e.g. cron) is being very careless.
838 =item Can't kill a non-numeric process ID
840 (F) Process identifiers must be (signed) integers. It is a fatal error to
841 attempt to kill() an undefined, empty-string or otherwise non-numeric
844 =item Can't "last" outside a loop block
846 (F) A "last" statement was executed to break out of the current block,
847 except that there's this itty bitty problem called there isn't a current
848 block. Note that an "if" or "else" block doesn't count as a "loopish"
849 block, as doesn't a block given to sort(), map() or grep(). You can
850 usually double the curlies to get the same effect though, because the
851 inner curlies will be considered a block that loops once. See
854 =item Can't linearize anonymous symbol table
856 (F) Perl tried to calculate the method resolution order (MRO) of a
857 package, but failed because the package stash has no name.
859 =item Can't load '%s' for module %s
861 (F) The module you tried to load failed to load a dynamic extension. This
862 may either mean that you upgraded your version of perl to one that is
863 incompatible with your old dynamic extensions (which is known to happen
864 between major versions of perl), or (more likely) that your dynamic
865 extension was built against an older version of the library that is
866 installed on your system. You may need to rebuild your old dynamic
869 =item Can't localize lexical variable %s
871 (F) You used local on a variable name that was previously declared as a
872 lexical variable using "my" or "state". This is not allowed. If you want to
873 localize a package variable of the same name, qualify it with the
876 =item Can't localize through a reference
878 (F) You said something like C<local $$ref>, which Perl can't currently
879 handle, because when it goes to restore the old value of whatever $ref
880 pointed to after the scope of the local() is finished, it can't be sure
881 that $ref will still be a reference.
883 =item Can't locate %s
885 (F) You said to C<do> (or C<require>, or C<use>) a file that couldn't be
886 found. Perl looks for the file in all the locations mentioned in @INC,
887 unless the file name included the full path to the file. Perhaps you
888 need to set the PERL5LIB or PERL5OPT environment variable to say where
889 the extra library is, or maybe the script needs to add the library name
890 to @INC. Or maybe you just misspelled the name of the file. See
891 L<perlfunc/require> and L<lib>.
893 =item Can't locate auto/%s.al in @INC
895 (F) A function (or method) was called in a package which allows
896 autoload, but there is no function to autoload. Most probable causes
897 are a misprint in a function/method name or a failure to C<AutoSplit>
898 the file, say, by doing C<make install>.
900 =item Can't locate loadable object for module %s in @INC
902 (F) The module you loaded is trying to load an external library, like
903 for example, C<foo.so> or C<bar.dll>, but the L<DynaLoader> module was
904 unable to locate this library. See L<DynaLoader>.
906 =item Can't locate object method "%s" via package "%s"
908 (F) You called a method correctly, and it correctly indicated a package
909 functioning as a class, but that package doesn't define that particular
910 method, nor does any of its base classes. See L<perlobj>.
912 =item Can't locate package %s for @%s::ISA
914 (W syntax) The @ISA array contained the name of another package that
915 doesn't seem to exist.
917 =item Can't locate PerlIO%s
919 (F) You tried to use in open() a PerlIO layer that does not exist,
920 e.g. open(FH, ">:nosuchlayer", "somefile").
922 =item Can't make list assignment to \%ENV on this system
924 (F) List assignment to %ENV is not supported on some systems, notably
927 =item Can't modify %s in %s
929 (F) You aren't allowed to assign to the item indicated, or otherwise try
930 to change it, such as with an auto-increment.
932 =item Can't modify nonexistent substring
934 (P) The internal routine that does assignment to a substr() was handed
937 =item Can't modify non-lvalue subroutine call
939 (F) Subroutines meant to be used in lvalue context should be declared as
940 such, see L<perlsub/"Lvalue subroutines">.
942 =item Can't msgrcv to read-only var
944 (F) The target of a msgrcv must be modifiable to be used as a receive
947 =item Can't "next" outside a loop block
949 (F) A "next" statement was executed to reiterate the current block, but
950 there isn't a current block. Note that an "if" or "else" block doesn't
951 count as a "loopish" block, as doesn't a block given to sort(), map() or
952 grep(). You can usually double the curlies to get the same effect
953 though, because the inner curlies will be considered a block that loops
954 once. See L<perlfunc/next>.
956 =item Can't open %s: %s
958 (S inplace) The implicit opening of a file through use of the C<< <> >>
959 filehandle, either implicitly under the C<-n> or C<-p> command-line
960 switches, or explicitly, failed for the indicated reason. Usually this
961 is because you don't have read permission for a file which you named on
964 =item Can't open a reference
966 (W io) You tried to open a scalar reference for reading or writing,
967 using the 3-arg open() syntax :
971 but your version of perl is compiled without perlio, and this form of
972 open is not supported.
974 =item Can't open bidirectional pipe
976 (W pipe) You tried to say C<open(CMD, "|cmd|")>, which is not supported.
977 You can try any of several modules in the Perl library to do this, such
978 as IPC::Open2. Alternately, direct the pipe's output to a file using
979 ">", and then read it in under a different file handle.
981 =item Can't open error file %s as stderr
983 (F) An error peculiar to VMS. Perl does its own command line
984 redirection, and couldn't open the file specified after '2>' or '2>>' on
985 the command line for writing.
987 =item Can't open input file %s as stdin
989 (F) An error peculiar to VMS. Perl does its own command line
990 redirection, and couldn't open the file specified after '<' on the
991 command line for reading.
993 =item Can't open output file %s as stdout
995 (F) An error peculiar to VMS. Perl does its own command line
996 redirection, and couldn't open the file specified after '>' or '>>' on
997 the command line for writing.
999 =item Can't open output pipe (name: %s)
1001 (P) An error peculiar to VMS. Perl does its own command line
1002 redirection, and couldn't open the pipe into which to send data destined
1005 =item Can't open perl script%s
1007 (F) The script you specified can't be opened for the indicated reason.
1009 If you're debugging a script that uses #!, and normally relies on the
1010 shell's $PATH search, the -S option causes perl to do that search, so
1011 you don't have to type the path or C<`which $scriptname`>.
1013 =item Can't read CRTL environ
1015 (S) A warning peculiar to VMS. Perl tried to read an element of %ENV
1016 from the CRTL's internal environment array and discovered the array was
1017 missing. You need to figure out where your CRTL misplaced its environ
1018 or define F<PERL_ENV_TABLES> (see L<perlvms>) so that environ is not
1021 =item Can't "redo" outside a loop block
1023 (F) A "redo" statement was executed to restart the current block, but
1024 there isn't a current block. Note that an "if" or "else" block doesn't
1025 count as a "loopish" block, as doesn't a block given to sort(), map()
1026 or grep(). You can usually double the curlies to get the same effect
1027 though, because the inner curlies will be considered a block that
1028 loops once. See L<perlfunc/redo>.
1030 =item Can't remove %s: %s, skipping file
1032 (S inplace) You requested an inplace edit without creating a backup
1033 file. Perl was unable to remove the original file to replace it with
1034 the modified file. The file was left unmodified.
1036 =item Can't rename %s to %s: %s, skipping file
1038 (S inplace) The rename done by the B<-i> switch failed for some reason,
1039 probably because you don't have write permission to the directory.
1041 =item Can't reopen input pipe (name: %s) in binary mode
1043 (P) An error peculiar to VMS. Perl thought stdin was a pipe, and tried
1044 to reopen it to accept binary data. Alas, it failed.
1046 =item Can't resolve method "%s" overloading "%s" in package "%s"
1048 (F|P) Error resolving overloading specified by a method name (as opposed
1049 to a subroutine reference): no such method callable via the package. If
1050 method name is C<???>, this is an internal error.
1052 =item Can't return %s from lvalue subroutine
1054 (F) Perl detected an attempt to return illegal lvalues (such as
1055 temporary or readonly values) from a subroutine used as an lvalue. This
1058 =item Can't return outside a subroutine
1060 (F) The return statement was executed in mainline code, that is, where
1061 there was no subroutine call to return out of. See L<perlsub>.
1063 =item Can't return %s to lvalue scalar context
1065 (F) You tried to return a complete array or hash from an lvalue subroutine,
1066 but you called the subroutine in a way that made Perl think you meant
1067 to return only one value. You probably meant to write parentheses around
1068 the call to the subroutine, which tell Perl that the call should be in
1071 =item Can't stat script "%s"
1073 (P) For some reason you can't fstat() the script even though you have it
1074 open already. Bizarre.
1076 =item Can't take log of %g
1078 (F) For ordinary real numbers, you can't take the logarithm of a
1079 negative number or zero. There's a Math::Complex package that comes
1080 standard with Perl, though, if you really want to do that for the
1083 =item Can't take sqrt of %g
1085 (F) For ordinary real numbers, you can't take the square root of a
1086 negative number. There's a Math::Complex package that comes standard
1087 with Perl, though, if you really want to do that.
1089 =item Can't undef active subroutine
1091 (F) You can't undefine a routine that's currently running. You can,
1092 however, redefine it while it's running, and you can even undef the
1093 redefined subroutine while the old routine is running. Go figure.
1097 (F) You tried to unshift an "unreal" array that can't be unshifted, such
1098 as the main Perl stack.
1100 =item Can't upgrade %s (%d) to %d
1102 (P) The internal sv_upgrade routine adds "members" to an SV, making it
1103 into a more specialized kind of SV. The top several SV types are so
1104 specialized, however, that they cannot be interconverted. This message
1105 indicates that such a conversion was attempted.
1107 =item Can't use anonymous symbol table for method lookup
1109 (F) The internal routine that does method lookup was handed a symbol
1110 table that doesn't have a name. Symbol tables can become anonymous
1111 for example by undefining stashes: C<undef %Some::Package::>.
1113 =item Can't use an undefined value as %s reference
1115 (F) A value used as either a hard reference or a symbolic reference must
1116 be a defined value. This helps to delurk some insidious errors.
1118 =item Can't use bareword ("%s") as %s ref while "strict refs" in use
1120 (F) Only hard references are allowed by "strict refs". Symbolic
1121 references are disallowed. See L<perlref>.
1123 =item Can't use %! because Errno.pm is not available
1125 (F) The first time the %! hash is used, perl automatically loads the
1126 Errno.pm module. The Errno module is expected to tie the %! hash to
1127 provide symbolic names for C<$!> errno values.
1129 =item Can't use both '<' and '>' after type '%c' in %s
1131 (F) A type cannot be forced to have both big-endian and little-endian
1132 byte-order at the same time, so this combination of modifiers is not
1133 allowed. See L<perlfunc/pack>.
1135 =item Can't use %s for loop variable
1137 (F) Only a simple scalar variable may be used as a loop variable on a
1140 =item Can't use global %s in "%s"
1142 (F) You tried to declare a magical variable as a lexical variable. This
1143 is not allowed, because the magic can be tied to only one location
1144 (namely the global variable) and it would be incredibly confusing to
1145 have variables in your program that looked like magical variables but
1148 =item Can't use '%c' in a group with different byte-order in %s
1150 (F) You attempted to force a different byte-order on a type
1151 that is already inside a group with a byte-order modifier.
1152 For example you cannot force little-endianness on a type that
1153 is inside a big-endian group.
1155 =item Can't use keyword '%s' as a label
1157 (F) You attempted to use a reserved keyword, such as C<print> or C<BEGIN>,
1158 as a statement label. This is disallowed since Perl 5.11.0.
1160 =item Can't use "my %s" in sort comparison
1162 (F) The global variables $a and $b are reserved for sort comparisons.
1163 You mentioned $a or $b in the same line as the <=> or cmp operator,
1164 and the variable had earlier been declared as a lexical variable.
1165 Either qualify the sort variable with the package name, or rename the
1168 =item Can't use %s ref as %s ref
1170 (F) You've mixed up your reference types. You have to dereference a
1171 reference of the type needed. You can use the ref() function to
1172 test the type of the reference, if need be.
1174 =item Can't use string ("%s") as %s ref while "strict refs" in use
1176 (F) Only hard references are allowed by "strict refs". Symbolic
1177 references are disallowed. See L<perlref>.
1179 =item Can't use subscript on %s
1181 (F) The compiler tried to interpret a bracketed expression as a
1182 subscript. But to the left of the brackets was an expression that
1183 didn't look like a hash or array reference, or anything else subscriptable.
1185 =item Can't use \%c to mean $%c in expression
1187 (W syntax) In an ordinary expression, backslash is a unary operator that
1188 creates a reference to its argument. The use of backslash to indicate a
1189 backreference to a matched substring is valid only as part of a regular
1190 expression pattern. Trying to do this in ordinary Perl code produces a
1191 value that prints out looking like SCALAR(0xdecaf). Use the $1 form
1194 =item Can't use "when" outside a topicalizer
1196 (F) You have used a when() block that is neither inside a C<foreach>
1197 loop nor a C<given> block. (Note that this error is issued on exit
1198 from the C<when> block, so you won't get the error if the match fails,
1199 or if you use an explicit C<continue>.)
1201 =item Can't weaken a nonreference
1203 (F) You attempted to weaken something that was not a reference. Only
1204 references can be weakened.
1206 =item Can't x= to read-only value
1208 (F) You tried to repeat a constant value (often the undefined value)
1209 with an assignment operator, which implies modifying the value itself.
1210 Perhaps you need to copy the value to a temporary, and repeat that.
1212 =item Character in 'C' format wrapped in pack
1218 where $x is either less than 0 or more than 255; the C<"C"> format is
1219 only for encoding native operating system characters (ASCII, EBCDIC,
1220 and so on) and not for Unicode characters, so Perl behaved as if you meant
1224 If you actually want to pack Unicode codepoints, use the C<"U"> format
1227 =item Character in 'W' format wrapped in pack
1233 where $x is either less than 0 or more than 255. However, C<U0>-mode expects
1234 all values to fall in the interval [0, 255], so Perl behaved as if you
1237 pack("U0W", $x & 255)
1239 =item Character in 'c' format wrapped in pack
1245 where $x is either less than -128 or more than 127; the C<"c"> format
1246 is only for encoding native operating system characters (ASCII, EBCDIC,
1247 and so on) and not for Unicode characters, so Perl behaved as if you meant
1249 pack("c", $x & 255);
1251 If you actually want to pack Unicode codepoints, use the C<"U"> format
1254 =item Character in '%c' format wrapped in unpack
1256 (W unpack) You tried something like
1258 unpack("H", "\x{2a1}")
1260 where the format expects to process a byte (a character with a value
1261 below 256), but a higher value was provided instead. Perl uses the value
1262 modulus 256 instead, as if you had provided:
1264 unpack("H", "\x{a1}")
1266 =item Character(s) in '%c' format wrapped in pack
1268 (W pack) You tried something like
1270 pack("u", "\x{1f3}b")
1272 where the format expects to process a sequence of bytes (character with a
1273 value below 256), but some of the characters had a higher value. Perl
1274 uses the character values modulus 256 instead, as if you had provided:
1276 pack("u", "\x{f3}b")
1278 =item Character(s) in '%c' format wrapped in unpack
1280 (W unpack) You tried something like
1282 unpack("s", "\x{1f3}b")
1284 where the format expects to process a sequence of bytes (character with a
1285 value below 256), but some of the characters had a higher value. Perl
1286 uses the character values modulus 256 instead, as if you had provided:
1288 unpack("s", "\x{f3}b")
1290 =item close() on unopened filehandle %s
1292 (W unopened) You tried to close a filehandle that was never opened.
1294 =item closedir() attempted on invalid dirhandle %s
1296 (W io) The dirhandle you tried to close is either closed or not really
1297 a dirhandle. Check your control flow.
1299 =item Code missing after '/'
1301 (F) You had a (sub-)template that ends with a '/'. There must be another
1302 template code following the slash. See L<perlfunc/pack>.
1304 =item %s: Command not found
1306 (A) You've accidentally run your script through B<csh> instead of Perl.
1307 Check the #! line, or manually feed your script into Perl yourself.
1309 =item Compilation failed in require
1311 (F) Perl could not compile a file specified in a C<require> statement.
1312 Perl uses this generic message when none of the errors that it
1313 encountered were severe enough to halt compilation immediately.
1315 =item Complex regular subexpression recursion limit (%d) exceeded
1317 (W regexp) The regular expression engine uses recursion in complex
1318 situations where back-tracking is required. Recursion depth is limited
1319 to 32766, or perhaps less in architectures where the stack cannot grow
1320 arbitrarily. ("Simple" and "medium" situations are handled without
1321 recursion and are not subject to a limit.) Try shortening the string
1322 under examination; looping in Perl code (e.g. with C<while>) rather than
1323 in the regular expression engine; or rewriting the regular expression so
1324 that it is simpler or backtracks less. (See L<perlfaq2> for information
1325 on I<Mastering Regular Expressions>.)
1327 =item cond_broadcast() called on unlocked variable
1329 (W threads) Within a thread-enabled program, you tried to call
1330 cond_broadcast() on a variable which wasn't locked. The cond_broadcast()
1331 function is used to wake up another thread that is waiting in a
1332 cond_wait(). To ensure that the signal isn't sent before the other thread
1333 has a chance to enter the wait, it is usual for the signaling thread to
1334 first wait for a lock on variable. This lock attempt will only succeed
1335 after the other thread has entered cond_wait() and thus relinquished the
1338 =item cond_signal() called on unlocked variable
1340 (W threads) Within a thread-enabled program, you tried to call
1341 cond_signal() on a variable which wasn't locked. The cond_signal()
1342 function is used to wake up another thread that is waiting in a
1343 cond_wait(). To ensure that the signal isn't sent before the other thread
1344 has a chance to enter the wait, it is usual for the signaling thread to
1345 first wait for a lock on variable. This lock attempt will only succeed
1346 after the other thread has entered cond_wait() and thus relinquished the
1349 =item connect() on closed socket %s
1351 (W closed) You tried to do a connect on a closed socket. Did you forget
1352 to check the return value of your socket() call? See
1353 L<perlfunc/connect>.
1355 =item Constant(%s)%s: %s
1357 (F) The parser found inconsistencies either while attempting to define
1358 an overloaded constant, or when trying to find the character name
1359 specified in the C<\N{...}> escape. Perhaps you forgot to load the
1360 corresponding C<overload> or C<charnames> pragma? See L<charnames> and
1363 =item Constant(%s)%s: %s in regex; marked by <-- HERE in m/%s/
1365 (F) The parser found inconsistencies while attempting to find
1366 the character name specified in the C<\N{...}> escape. Perhaps you
1367 forgot to load the corresponding C<charnames> pragma?
1371 =item Constant is not %s reference
1373 (F) A constant value (perhaps declared using the C<use constant> pragma)
1374 is being dereferenced, but it amounts to the wrong type of reference.
1375 The message indicates the type of reference that was expected. This
1376 usually indicates a syntax error in dereferencing the constant value.
1377 See L<perlsub/"Constant Functions"> and L<constant>.
1379 =item Constant subroutine %s redefined
1381 (S) You redefined a subroutine which had previously been
1382 eligible for inlining. See L<perlsub/"Constant Functions"> for
1383 commentary and workarounds.
1385 =item Constant subroutine %s undefined
1387 (W misc) You undefined a subroutine which had previously been eligible
1388 for inlining. See L<perlsub/"Constant Functions"> for commentary and
1391 =item Copy method did not return a reference
1393 (F) The method which overloads "=" is buggy. See
1394 L<overload/Copy Constructor>.
1396 =item CORE::%s is not a keyword
1398 (F) The CORE:: namespace is reserved for Perl keywords.
1400 =item corrupted regexp pointers
1402 (P) The regular expression engine got confused by what the regular
1403 expression compiler gave it.
1405 =item corrupted regexp program
1407 (P) The regular expression engine got passed a regexp program without a
1410 =item Corrupt malloc ptr 0x%lx at 0x%lx
1412 (P) The malloc package that comes with Perl had an internal failure.
1414 =item Count after length/code in unpack
1416 (F) You had an unpack template indicating a counted-length string, but
1417 you have also specified an explicit size for the string. See
1420 =item Deep recursion on subroutine "%s"
1422 (W recursion) This subroutine has called itself (directly or indirectly)
1423 100 times more than it has returned. This probably indicates an
1424 infinite recursion, unless you're writing strange benchmark programs, in
1425 which case it indicates something else.
1427 This threshold can be changed from 100, by recompiling the F<perl> binary,
1428 setting the C pre-processor macro C<PERL_SUB_DEPTH_WARN> to the desired value.
1430 =item defined(@array) is deprecated
1432 (D deprecated) defined() is not usually useful on arrays because it
1433 checks for an undefined I<scalar> value. If you want to see if the
1434 array is empty, just use C<if (@array) { # not empty }> for example.
1436 =item defined(%hash) is deprecated
1438 (D deprecated) defined() is not usually useful on hashes because it
1439 checks for an undefined I<scalar> value. If you want to see if the hash
1440 is empty, just use C<if (%hash) { # not empty }> for example.
1442 =item %s defines neither package nor VERSION--version check failed
1444 (F) You said something like "use Module 42" but in the Module file
1445 there are neither package declarations nor a C<$VERSION>.
1447 =item Delimiter for here document is too long
1449 (F) In a here document construct like C<<<FOO>, the label C<FOO> is too
1450 long for Perl to handle. You have to be seriously twisted to write code
1451 that triggers this error.
1453 =item Deprecated use of my() in false conditional
1455 (D deprecated) You used a declaration similar to C<my $x if 0>.
1456 There has been a long-standing bug in Perl that causes a lexical variable
1457 not to be cleared at scope exit when its declaration includes a false
1458 conditional. Some people have exploited this bug to achieve a kind of
1459 static variable. Since we intend to fix this bug, we don't want people
1460 relying on this behavior. You can achieve a similar static effect by
1461 declaring the variable in a separate block outside the function, eg
1463 sub f { my $x if 0; return $x++ }
1467 { my $x; sub f { return $x++ } }
1469 Beginning with perl 5.9.4, you can also use C<state> variables to
1470 have lexicals that are initialized only once (see L<feature>):
1472 sub f { state $x; return $x++ }
1474 =item DESTROY created new reference to dead object '%s'
1476 (F) A DESTROY() method created a new reference to the object which is
1477 just being DESTROYed. Perl is confused, and prefers to abort rather than
1478 to create a dangling reference.
1480 =item Did not produce a valid header
1484 =item %s did not return a true value
1486 (F) A required (or used) file must return a true value to indicate that
1487 it compiled correctly and ran its initialization code correctly. It's
1488 traditional to end such a file with a "1;", though any true value would
1489 do. See L<perlfunc/require>.
1491 =item (Did you mean &%s instead?)
1493 (W) You probably referred to an imported subroutine &FOO as $FOO or some
1496 =item (Did you mean "local" instead of "our"?)
1498 (W misc) Remember that "our" does not localize the declared global
1499 variable. You have declared it again in the same lexical scope, which
1502 =item (Did you mean $ or @ instead of %?)
1504 (W) You probably said %hash{$key} when you meant $hash{$key} or
1505 @hash{@keys}. On the other hand, maybe you just meant %hash and got
1510 (F) You passed die() an empty string (the equivalent of C<die "">) or
1511 you called it with no args and both C<$@> and C<$_> were empty.
1513 =item Document contains no data
1517 =item %s does not define %s::VERSION--version check failed
1519 (F) You said something like "use Module 42" but the Module did not
1520 define a C<$VERSION.>
1522 =item '/' does not take a repeat count
1524 (F) You cannot put a repeat count of any kind right after the '/' code.
1525 See L<perlfunc/pack>.
1527 =item Don't know how to handle magic of type '%s'
1529 (P) The internal handling of magical variables has been cursed.
1531 =item do_study: out of memory
1533 (P) This should have been caught by safemalloc() instead.
1535 =item (Do you need to predeclare %s?)
1537 (S syntax) This is an educated guess made in conjunction with the message
1538 "%s found where operator expected". It often means a subroutine or module
1539 name is being referenced that hasn't been declared yet. This may be
1540 because of ordering problems in your file, or because of a missing
1541 "sub", "package", "require", or "use" statement. If you're referencing
1542 something that isn't defined yet, you don't actually have to define the
1543 subroutine or package before the current location. You can use an empty
1544 "sub foo;" or "package FOO;" to enter a "forward" declaration.
1546 =item dump() better written as CORE::dump()
1548 (W misc) You used the obsolescent C<dump()> built-in function, without fully
1549 qualifying it as C<CORE::dump()>. Maybe it's a typo. See L<perlfunc/dump>.
1551 =item dump is not supported
1553 (F) Your machine doesn't support dump/undump.
1555 =item Duplicate free() ignored
1557 (S malloc) An internal routine called free() on something that had
1560 =item Duplicate modifier '%c' after '%c' in %s
1562 (W) You have applied the same modifier more than once after a type
1563 in a pack template. See L<perlfunc/pack>.
1565 =item elseif should be elsif
1567 (S syntax) There is no keyword "elseif" in Perl because Larry thinks it's
1568 ugly. Your code will be interpreted as an attempt to call a method named
1569 "elseif" for the class returned by the following block. This is
1570 unlikely to be what you want.
1574 (F) C<\p> and C<\P> are used to introduce a named Unicode property, as
1575 described in L<perlunicode> and L<perlre>. You used C<\p> or C<\P> in
1576 a regular expression without specifying the property name.
1578 =item entering effective %s failed
1580 (F) While under the C<use filetest> pragma, switching the real and
1581 effective uids or gids failed.
1583 =item %ENV is aliased to %s
1585 (F) You're running under taint mode, and the C<%ENV> variable has been
1586 aliased to another hash, so it doesn't reflect anymore the state of the
1587 program's environment. This is potentially insecure.
1589 =item Error converting file specification %s
1591 (F) An error peculiar to VMS. Because Perl may have to deal with file
1592 specifications in either VMS or Unix syntax, it converts them to a
1593 single form when it must operate on them directly. Either you've passed
1594 an invalid file specification to Perl, or you've found a case the
1595 conversion routines don't handle. Drat.
1597 =item %s: Eval-group in insecure regular expression
1599 (F) Perl detected tainted data when trying to compile a regular
1600 expression that contains the C<(?{ ... })> zero-width assertion, which
1601 is unsafe. See L<perlre/(?{ code })>, and L<perlsec>.
1603 =item %s: Eval-group not allowed at runtime, use re 'eval'
1605 (F) Perl tried to compile a regular expression containing the
1606 C<(?{ ... })> zero-width assertion at run time, as it would when the
1607 pattern contains interpolated values. Since that is a security risk, it
1608 is not allowed. If you insist, you may still do this by explicitly
1609 building the pattern from an interpolated string at run time and using
1610 that in an eval(). See L<perlre/(?{ code })>.
1612 =item %s: Eval-group not allowed, use re 'eval'
1614 (F) A regular expression contained the C<(?{ ... })> zero-width
1615 assertion, but that construct is only allowed when the C<use re 'eval'>
1616 pragma is in effect. See L<perlre/(?{ code })>.
1618 =item EVAL without pos change exceeded limit in regex; marked by <-- HERE in m/%s/
1620 (F) You used a pattern that nested too many EVAL calls without consuming
1621 any text. Restructure the pattern so that text is consumed.
1623 The <-- HERE shows in the regular expression about where the problem was
1626 =item Excessively long <> operator
1628 (F) The contents of a <> operator may not exceed the maximum size of a
1629 Perl identifier. If you're just trying to glob a long list of
1630 filenames, try using the glob() operator, or put the filenames into a
1631 variable and glob that.
1633 =item exec? I'm not *that* kind of operating system
1635 (F) The C<exec> function is not implemented in MacPerl. See L<perlport>.
1637 =item Execution of %s aborted due to compilation errors.
1639 (F) The final summary message when a Perl compilation fails.
1641 =item Exiting eval via %s
1643 (W exiting) You are exiting an eval by unconventional means, such as a
1644 goto, or a loop control statement.
1646 =item Exiting format via %s
1648 (W exiting) You are exiting a format by unconventional means, such as a
1649 goto, or a loop control statement.
1651 =item Exiting pseudo-block via %s
1653 (W exiting) You are exiting a rather special block construct (like a
1654 sort block or subroutine) by unconventional means, such as a goto, or a
1655 loop control statement. See L<perlfunc/sort>.
1657 =item Exiting subroutine via %s
1659 (W exiting) You are exiting a subroutine by unconventional means, such
1660 as a goto, or a loop control statement.
1662 =item Exiting substitution via %s
1664 (W exiting) You are exiting a substitution by unconventional means, such
1665 as a return, a goto, or a loop control statement.
1667 =item Explicit blessing to '' (assuming package main)
1669 (W misc) You are blessing a reference to a zero length string. This has
1670 the effect of blessing the reference into the package main. This is
1671 usually not what you want. Consider providing a default target package,
1672 e.g. bless($ref, $p || 'MyPackage');
1674 =item %s: Expression syntax
1676 (A) You've accidentally run your script through B<csh> instead of Perl.
1677 Check the #! line, or manually feed your script into Perl yourself.
1679 =item %s failed--call queue aborted
1681 (F) An untrapped exception was raised while executing a UNITCHECK,
1682 CHECK, INIT, or END subroutine. Processing of the remainder of the
1683 queue of such routines has been prematurely ended.
1685 =item False [] range "%s" in regex; marked by <-- HERE in m/%s/
1687 (W regexp) A character class range must start and end at a literal
1688 character, not another character class like C<\d> or C<[:alpha:]>. The "-"
1689 in your false range is interpreted as a literal "-". Consider quoting the
1690 "-", "\-". The <-- HERE shows in the regular expression about where the
1691 problem was discovered. See L<perlre>.
1693 =item Fatal VMS error at %s, line %d
1695 (P) An error peculiar to VMS. Something untoward happened in a VMS
1696 system service or RTL routine; Perl's exit status should provide more
1697 details. The filename in "at %s" and the line number in "line %d" tell
1698 you which section of the Perl source code is distressed.
1700 =item fcntl is not implemented
1702 (F) Your machine apparently doesn't implement fcntl(). What is this, a
1703 PDP-11 or something?
1705 =item FETCHSIZE returned a negative value
1707 (F) A tied array claimed to have a negative number of elements, which
1710 =item Field too wide in 'u' format in pack
1712 (W pack) Each line in an uuencoded string start with a length indicator
1713 which can't encode values above 63. So there is no point in asking for
1714 a line length bigger than that. Perl will behave as if you specified
1717 =item Filehandle %s opened only for input
1719 (W io) You tried to write on a read-only filehandle. If you intended
1720 it to be a read-write filehandle, you needed to open it with "+<" or
1721 "+>" or "+>>" instead of with "<" or nothing. If you intended only to
1722 write the file, use ">" or ">>". See L<perlfunc/open>.
1724 =item Filehandle %s opened only for output
1726 (W io) You tried to read from a filehandle opened only for writing, If
1727 you intended it to be a read/write filehandle, you needed to open it
1728 with "+<" or "+>" or "+>>" instead of with "<" or nothing. If you
1729 intended only to read from the file, use "<". See L<perlfunc/open>.
1730 Another possibility is that you attempted to open filedescriptor 0
1731 (also known as STDIN) for output (maybe you closed STDIN earlier?).
1733 =item Filehandle %s reopened as %s only for input
1735 (W io) You opened for reading a filehandle that got the same filehandle id
1736 as STDOUT or STDERR. This occurred because you closed STDOUT or STDERR
1739 =item Filehandle STDIN reopened as %s only for output
1741 (W io) You opened for writing a filehandle that got the same filehandle id
1742 as STDIN. This occurred because you closed STDIN previously.
1744 =item Final $ should be \$ or $name
1746 (F) You must now decide whether the final $ in a string was meant to be
1747 a literal dollar sign, or was meant to introduce a variable name that
1748 happens to be missing. So you have to put either the backslash or the
1751 =item flock() on closed filehandle %s
1753 (W closed) The filehandle you're attempting to flock() got itself closed
1754 some time before now. Check your control flow. flock() operates on
1755 filehandles. Are you attempting to call flock() on a dirhandle by the
1758 =item Format not terminated
1760 (F) A format must be terminated by a line with a solitary dot. Perl got
1761 to the end of your file without finding such a line.
1763 =item Format %s redefined
1765 (W redefine) You redefined a format. To suppress this warning, say
1768 no warnings 'redefine';
1769 eval "format NAME =...";
1772 =item Found = in conditional, should be ==
1782 (or something like that).
1784 =item %s found where operator expected
1786 (S syntax) The Perl lexer knows whether to expect a term or an operator.
1787 If it sees what it knows to be a term when it was expecting to see an
1788 operator, it gives you this warning. Usually it indicates that an
1789 operator or delimiter was omitted, such as a semicolon.
1791 =item gdbm store returned %d, errno %d, key "%s"
1793 (S) A warning from the GDBM_File extension that a store failed.
1795 =item gethostent not implemented
1797 (F) Your C library apparently doesn't implement gethostent(), probably
1798 because if it did, it'd feel morally obligated to return every hostname
1801 =item get%sname() on closed socket %s
1803 (W closed) You tried to get a socket or peer socket name on a closed
1804 socket. Did you forget to check the return value of your socket() call?
1806 =item getpwnam returned invalid UIC %#o for user "%s"
1808 (S) A warning peculiar to VMS. The call to C<sys$getuai> underlying the
1809 C<getpwnam> operator returned an invalid UIC.
1811 =item getsockopt() on closed socket %s
1813 (W closed) You tried to get a socket option on a closed socket. Did you
1814 forget to check the return value of your socket() call? See
1815 L<perlfunc/getsockopt>.
1817 =item Global symbol "%s" requires explicit package name
1819 (F) You've said "use strict" or "use strict vars", which indicates
1820 that all variables must either be lexically scoped (using "my" or "state"),
1821 declared beforehand using "our", or explicitly qualified to say
1822 which package the global variable is in (using "::").
1824 =item glob failed (%s)
1826 (W glob) Something went wrong with the external program(s) used for
1827 C<glob> and C<< <*.c> >>. Usually, this means that you supplied a
1828 C<glob> pattern that caused the external program to fail and exit with a
1829 nonzero status. If the message indicates that the abnormal exit
1830 resulted in a coredump, this may also mean that your csh (C shell) is
1831 broken. If so, you should change all of the csh-related variables in
1832 config.sh: If you have tcsh, make the variables refer to it as if it
1833 were csh (e.g. C<full_csh='/usr/bin/tcsh'>); otherwise, make them all
1834 empty (except that C<d_csh> should be C<'undef'>) so that Perl will
1835 think csh is missing. In either case, after editing config.sh, run
1836 C<./Configure -S> and rebuild Perl.
1838 =item Glob not terminated
1840 (F) The lexer saw a left angle bracket in a place where it was expecting
1841 a term, so it's looking for the corresponding right angle bracket, and
1842 not finding it. Chances are you left some needed parentheses out
1843 earlier in the line, and you really meant a "less than".
1845 =item Got an error from DosAllocMem
1847 (P) An error peculiar to OS/2. Most probably you're using an obsolete
1848 version of Perl, and this should not happen anyway.
1850 =item goto must have label
1852 (F) Unlike with "next" or "last", you're not allowed to goto an
1853 unspecified destination. See L<perlfunc/goto>.
1855 =item ()-group starts with a count
1857 (F) A ()-group started with a count. A count is
1858 supposed to follow something: a template character or a ()-group.
1859 See L<perlfunc/pack>.
1861 =item %s had compilation errors.
1863 (F) The final summary message when a C<perl -c> fails.
1865 =item Had to create %s unexpectedly
1867 (S internal) A routine asked for a symbol from a symbol table that ought
1868 to have existed already, but for some reason it didn't, and had to be
1869 created on an emergency basis to prevent a core dump.
1871 =item Hash %%s missing the % in argument %d of %s()
1873 (D deprecated) Really old Perl let you omit the % on hash names in some
1874 spots. This is now heavily deprecated.
1876 =item %s has too many errors
1878 (F) The parser has given up trying to parse the program after 10 errors.
1879 Further error messages would likely be uninformative.
1881 =item Hexadecimal number > 0xffffffff non-portable
1883 (W portable) The hexadecimal number you specified is larger than 2**32-1
1884 (4294967295) and therefore non-portable between systems. See
1885 L<perlport> for more on portability concerns.
1887 =item Identifier too long
1889 (F) Perl limits identifiers (names for variables, functions, etc.) to
1890 about 250 characters for simple names, and somewhat more for compound
1891 names (like C<$A::B>). You've exceeded Perl's limits. Future versions
1892 of Perl are likely to eliminate these arbitrary limitations.
1894 =item Ignoring %s in character class in regex; marked by <-- HERE in m/%s/
1896 (W) Named Unicode character escapes (\N{...}) may return multi-char
1897 or zero length sequences. When such an escape is used in a character class
1898 its behaviour is not well defined. Check that the correct escape has
1899 been used, and the correct charname handler is in scope.
1901 =item Illegal binary digit %s
1903 (F) You used a digit other than 0 or 1 in a binary number.
1905 =item Illegal binary digit %s ignored
1907 (W digit) You may have tried to use a digit other than 0 or 1 in a
1908 binary number. Interpretation of the binary number stopped before the
1911 =item Illegal character %s (carriage return)
1913 (F) Perl normally treats carriage returns in the program text as it
1914 would any other whitespace, which means you should never see this error
1915 when Perl was built using standard options. For some reason, your
1916 version of Perl appears to have been built without this support. Talk
1917 to your Perl administrator.
1919 =item Illegal character in prototype for %s : %s
1921 (W syntax) An illegal character was found in a prototype declaration. Legal
1922 characters in prototypes are $, @, %, *, ;, [, ], &, and \.
1924 =item Illegal declaration of anonymous subroutine
1926 (F) When using the C<sub> keyword to construct an anonymous subroutine,
1927 you must always specify a block of code. See L<perlsub>.
1929 =item Illegal declaration of subroutine %s
1931 (F) A subroutine was not declared correctly. See L<perlsub>.
1933 =item Illegal division by zero
1935 (F) You tried to divide a number by 0. Either something was wrong in
1936 your logic, or you need to put a conditional in to guard against
1939 =item Illegal hexadecimal digit %s ignored
1941 (W digit) You may have tried to use a character other than 0 - 9 or
1942 A - F, a - f in a hexadecimal number. Interpretation of the hexadecimal
1943 number stopped before the illegal character.
1945 =item Illegal modulus zero
1947 (F) You tried to divide a number by 0 to get the remainder. Most
1948 numbers don't take to this kindly.
1950 =item Illegal number of bits in vec
1952 (F) The number of bits in vec() (the third argument) must be a power of
1953 two from 1 to 32 (or 64, if your platform supports that).
1955 =item Illegal octal digit %s
1957 (F) You used an 8 or 9 in an octal number.
1959 =item Illegal octal digit %s ignored
1961 (W digit) You may have tried to use an 8 or 9 in an octal number.
1962 Interpretation of the octal number stopped before the 8 or 9.
1964 =item Illegal switch in PERL5OPT: -%c
1966 (X) The PERL5OPT environment variable may only be used to set the
1967 following switches: B<-[CDIMUdmtw]>.
1969 =item Ill-formed CRTL environ value "%s"
1971 (W internal) A warning peculiar to VMS. Perl tried to read the CRTL's
1972 internal environ array, and encountered an element without the C<=>
1973 delimiter used to separate keys from values. The element is ignored.
1975 =item Ill-formed message in prime_env_iter: |%s|
1977 (W internal) A warning peculiar to VMS. Perl tried to read a logical
1978 name or CLI symbol definition when preparing to iterate over %ENV, and
1979 didn't see the expected delimiter between key and value, so the line was
1982 =item (in cleanup) %s
1984 (W misc) This prefix usually indicates that a DESTROY() method raised
1985 the indicated exception. Since destructors are usually called by the
1986 system at arbitrary points during execution, and often a vast number of
1987 times, the warning is issued only once for any number of failures that
1988 would otherwise result in the same message being repeated.
1990 Failure of user callbacks dispatched using the C<G_KEEPERR> flag could
1991 also result in this warning. See L<perlcall/G_KEEPERR>.
1993 =item Inconsistent hierarchy during C3 merge of class '%s': merging failed on parent '%s'
1995 (F) The method resolution order (MRO) of the given class is not
1996 C3-consistent, and you have enabled the C3 MRO for this class. See the C3
1997 documentation in L<mro> for more information.
1999 =item In EBCDIC the v-string components cannot exceed 2147483647
2001 (F) An error peculiar to EBCDIC. Internally, v-strings are stored as
2002 Unicode code points, and encoded in EBCDIC as UTF-EBCDIC. The UTF-EBCDIC
2003 encoding is limited to code points no larger than 2147483647 (0x7FFFFFFF).
2005 =item Infinite recursion in regex; marked by <-- HERE in m/%s/
2007 (F) You used a pattern that references itself without consuming any input
2008 text. You should check the pattern to ensure that recursive patterns
2009 either consume text or fail.
2011 The <-- HERE shows in the regular expression about where the problem was
2014 =item Initialization of state variables in list context currently forbidden
2016 (F) Currently the implementation of "state" only permits the initialization
2017 of scalar variables in scalar context. Re-write C<state ($a) = 42> as
2018 C<state $a = 42> to change from list to scalar context. Constructions such
2019 as C<state (@a) = foo()> will be supported in a future perl release.
2021 =item Insecure dependency in %s
2023 (F) You tried to do something that the tainting mechanism didn't like.
2024 The tainting mechanism is turned on when you're running setuid or
2025 setgid, or when you specify B<-T> to turn it on explicitly. The
2026 tainting mechanism labels all data that's derived directly or indirectly
2027 from the user, who is considered to be unworthy of your trust. If any
2028 such data is used in a "dangerous" operation, you get this error. See
2029 L<perlsec> for more information.
2031 =item Insecure directory in %s
2033 (F) You can't use system(), exec(), or a piped open in a setuid or
2034 setgid script if C<$ENV{PATH}> contains a directory that is writable by
2035 the world. Also, the PATH must not contain any relative directory.
2038 =item Insecure $ENV{%s} while running %s
2040 (F) You can't use system(), exec(), or a piped open in a setuid or
2041 setgid script if any of C<$ENV{PATH}>, C<$ENV{IFS}>, C<$ENV{CDPATH}>,
2042 C<$ENV{ENV}>, C<$ENV{BASH_ENV}> or C<$ENV{TERM}> are derived from data
2043 supplied (or potentially supplied) by the user. The script must set
2044 the path to a known value, using trustworthy data. See L<perlsec>.
2046 =item Integer overflow in %s number
2048 (W overflow) The hexadecimal, octal or binary number you have specified
2049 either as a literal or as an argument to hex() or oct() is too big for
2050 your architecture, and has been converted to a floating point number.
2051 On a 32-bit architecture the largest hexadecimal, octal or binary number
2052 representable without overflow is 0xFFFFFFFF, 037777777777, or
2053 0b11111111111111111111111111111111 respectively. Note that Perl
2054 transparently promotes all numbers to a floating point representation
2055 internally--subject to loss of precision errors in subsequent
2058 =item Integer overflow in format string for %s
2060 (F) The indexes and widths specified in the format string of C<printf()>
2061 or C<sprintf()> are too large. The numbers must not overflow the size of
2062 integers for your architecture.
2064 =item Integer overflow in version
2066 (F) Some portion of a version initialization is too large for the
2067 size of integers for your architecture. This is not a warning
2068 because there is no rational reason for a version to try and use a
2069 element larger than typically 2**32. This is usually caused by
2070 trying to use some odd mathematical operation as a version, like
2073 =item Internal disaster in regex; marked by <-- HERE in m/%s/
2075 (P) Something went badly wrong in the regular expression parser.
2076 The <-- HERE shows in the regular expression about where the problem was
2079 =item Internal inconsistency in tracking vforks
2081 (S) A warning peculiar to VMS. Perl keeps track of the number of times
2082 you've called C<fork> and C<exec>, to determine whether the current call
2083 to C<exec> should affect the current script or a subprocess (see
2084 L<perlvms/"exec LIST">). Somehow, this count has become scrambled, so
2085 Perl is making a guess and treating this C<exec> as a request to
2086 terminate the Perl script and execute the specified command.
2088 =item Internal urp in regex; marked by <-- HERE in m/%s/
2090 (P) Something went badly awry in the regular expression parser. The
2091 <-- HERE shows in the regular expression about where the problem was
2094 =item %s (...) interpreted as function
2096 (W syntax) You've run afoul of the rule that says that any list operator
2097 followed by parentheses turns into a function, with all the list
2098 operators arguments found inside the parentheses. See
2099 L<perlop/Terms and List Operators (Leftward)>.
2101 =item Invalid %s attribute: %s
2103 The indicated attribute for a subroutine or variable was not recognized
2104 by Perl or by a user-supplied handler. See L<attributes>.
2106 =item Invalid %s attributes: %s
2108 The indicated attributes for a subroutine or variable were not
2109 recognized by Perl or by a user-supplied handler. See L<attributes>.
2111 =item Invalid conversion in %s: "%s"
2113 (W printf) Perl does not understand the given format conversion. See
2114 L<perlfunc/sprintf>.
2116 =item Invalid escape in the specified encoding in regex; marked by <-- HERE in m/%s/
2118 (W regexp) The numeric escape (for example C<\xHH>) of value < 256
2119 didn't correspond to a single character through the conversion
2120 from the encoding specified by the encoding pragma.
2121 The escape was replaced with REPLACEMENT CHARACTER (U+FFFD) instead.
2122 The <-- HERE shows in the regular expression about where the
2123 escape was discovered.
2125 =item Invalid mro name: '%s'
2127 (F) You tried to C<mro::set_mro("classname", "foo")>
2128 or C<use mro 'foo'>, where C<foo> is not a valid method resolution order (MRO).
2129 (Currently, the only valid ones are C<dfs> and C<c3>). See L<mro>.
2131 =item Invalid [] range "%s" in regex; marked by <-- HERE in m/%s/
2133 (F) The range specified in a character class had a minimum character
2134 greater than the maximum character. One possibility is that you forgot the
2135 C<{}> from your ending C<\x{}> - C<\x> without the curly braces can go only
2136 up to C<ff>. The <-- HERE shows in the regular expression about where the
2137 problem was discovered. See L<perlre>.
2139 =item Invalid range "%s" in transliteration operator
2141 (F) The range specified in the tr/// or y/// operator had a minimum
2142 character greater than the maximum character. See L<perlop>.
2144 =item Invalid separator character %s in attribute list
2146 (F) Something other than a colon or whitespace was seen between the
2147 elements of an attribute list. If the previous attribute had a
2148 parenthesised parameter list, perhaps that list was terminated too soon.
2151 =item Invalid separator character %s in PerlIO layer specification %s
2153 (W layer) When pushing layers onto the Perl I/O system, something other than a
2154 colon or whitespace was seen between the elements of a layer list.
2155 If the previous attribute had a parenthesised parameter list, perhaps that
2156 list was terminated too soon.
2158 =item Invalid type '%s' in %s
2160 (F) The given character is not a valid pack or unpack type.
2161 See L<perlfunc/pack>.
2162 (W) The given character is not a valid pack or unpack type but used to be
2165 =item Invalid version format (multiple underscores)
2167 (F) Versions may contain at most a single underscore, which signals
2168 that the version is a beta release. See L<version> for the allowed
2171 =item Invalid version format (underscores before decimal)
2173 (F) Versions may not contain decimals after the optional underscore.
2174 See L<version> for the allowed version formats.
2176 =item ioctl is not implemented
2178 (F) Your machine apparently doesn't implement ioctl(), which is pretty
2179 strange for a machine that supports C.
2181 =item ioctl() on unopened %s
2183 (W unopened) You tried ioctl() on a filehandle that was never opened.
2184 Check you control flow and number of arguments.
2186 =item IO layers (like '%s') unavailable
2188 (F) Your Perl has not been configured to have PerlIO, and therefore
2189 you cannot use IO layers. To have PerlIO Perl must be configured
2192 =item IO::Socket::atmark not implemented on this architecture
2194 (F) Your machine doesn't implement the sockatmark() functionality,
2195 neither as a system call or an ioctl call (SIOCATMARK).
2197 =item $* is no longer supported
2199 (D deprecated, syntax) The special variable C<$*>, deprecated in older perls, has
2200 been removed as of 5.9.0 and is no longer supported. In previous versions of perl the use of
2201 C<$*> enabled or disabled multi-line matching within a string.
2203 Instead of using C<$*> you should use the C</m> (and maybe C</s>) regexp
2204 modifiers. (In older versions: when C<$*> was set to a true value then all regular
2205 expressions behaved as if they were written using C</m>.)
2207 =item $# is no longer supported
2209 (D deprecated, syntax) The special variable C<$#>, deprecated in older perls, has
2210 been removed as of 5.9.3 and is no longer supported. You should use the
2211 printf/sprintf functions instead.
2213 =item `%s' is not a code reference
2215 (W overload) The second (fourth, sixth, ...) argument of overload::constant
2216 needs to be a code reference. Either an anonymous subroutine, or a reference
2219 =item `%s' is not an overloadable type
2221 (W overload) You tried to overload a constant type the overload package is
2224 =item junk on end of regexp
2226 (P) The regular expression parser is confused.
2228 =item Label not found for "last %s"
2230 (F) You named a loop to break out of, but you're not currently in a loop
2231 of that name, not even if you count where you were called from. See
2234 =item Label not found for "next %s"
2236 (F) You named a loop to continue, but you're not currently in a loop of
2237 that name, not even if you count where you were called from. See
2240 =item Label not found for "redo %s"
2242 (F) You named a loop to restart, but you're not currently in a loop of
2243 that name, not even if you count where you were called from. See
2246 =item leaving effective %s failed
2248 (F) While under the C<use filetest> pragma, switching the real and
2249 effective uids or gids failed.
2251 =item length/code after end of string in unpack
2253 (F) While unpacking, the string buffer was already used up when an unpack
2254 length/code combination tried to obtain more data. This results in
2255 an undefined value for the length. See L<perlfunc/pack>.
2257 =item listen() on closed socket %s
2259 (W closed) You tried to do a listen on a closed socket. Did you forget
2260 to check the return value of your socket() call? See
2263 =item Lookbehind longer than %d not implemented in regex m/%s/
2265 (F) There is currently a limit on the length of string which lookbehind can
2266 handle. This restriction may be eased in a future release.
2268 =item Lost precision when %s %f by 1
2270 (W) The value you attempted to increment or decrement by one is too large
2271 for the underlying floating point representation to store accurately,
2272 hence the target of C<++> or C<--> is unchanged. Perl issues this warning
2273 because it has already switched from integers to floating point when values
2274 are too large for integers, and now even floating point is insufficient.
2275 You may wish to switch to using L<Math::BigInt> explicitly.
2277 =item lstat() on filehandle %s
2279 (W io) You tried to do an lstat on a filehandle. What did you mean
2280 by that? lstat() makes sense only on filenames. (Perl did a fstat()
2281 instead on the filehandle.)
2283 =item Lvalue subs returning %s not implemented yet
2285 (F) Due to limitations in the current implementation, array and hash
2286 values cannot be returned in subroutines used in lvalue context. See
2287 L<perlsub/"Lvalue subroutines">.
2289 =item Malformed integer in [] in pack
2291 (F) Between the brackets enclosing a numeric repeat count only digits
2292 are permitted. See L<perlfunc/pack>.
2294 =item Malformed integer in [] in unpack
2296 (F) Between the brackets enclosing a numeric repeat count only digits
2297 are permitted. See L<perlfunc/pack>.
2299 =item Malformed PERLLIB_PREFIX
2301 (F) An error peculiar to OS/2. PERLLIB_PREFIX should be of the form
2308 with nonempty prefix1 and prefix2. If C<prefix1> is indeed a prefix of
2309 a builtin library search path, prefix2 is substituted. The error may
2310 appear if components are not found, or are too long. See
2311 "PERLLIB_PREFIX" in L<perlos2>.
2313 =item Malformed prototype for %s: %s
2315 (F) You tried to use a function with a malformed prototype. The
2316 syntax of function prototypes is given a brief compile-time check for
2317 obvious errors like invalid characters. A more rigorous check is run
2318 when the function is called.
2320 =item Malformed UTF-8 character (%s)
2322 (S utf8) (F) Perl detected a string that didn't comply with UTF-8
2323 encoding rules, even though it had the UTF8 flag on.
2325 One possible cause is that you set the UTF8 flag yourself for data that
2326 you thought to be in UTF-8 but it wasn't (it was for example legacy
2327 8-bit data). To guard against this, you can use Encode::decode_utf8.
2329 If you use the C<:encoding(UTF-8)> PerlIO layer for input, invalid byte
2330 sequences are handled gracefully, but if you use C<:utf8>, the flag is
2331 set without validating the data, possibly resulting in this error
2334 See also L<Encode/"Handling Malformed Data">.
2336 =item Malformed UTF-16 surrogate
2338 (F) Perl thought it was reading UTF-16 encoded character data but while
2339 doing it Perl met a malformed Unicode surrogate.
2341 =item Malformed UTF-8 string in pack
2343 (F) You tried to pack something that didn't comply with UTF-8 encoding
2344 rules and perl was unable to guess how to make more progress.
2346 =item Malformed UTF-8 string in unpack
2348 (F) You tried to unpack something that didn't comply with UTF-8 encoding
2349 rules and perl was unable to guess how to make more progress.
2351 =item Malformed UTF-8 string in '%c' format in unpack
2353 (F) You tried to unpack something that didn't comply with UTF-8 encoding
2354 rules and perl was unable to guess how to make more progress.
2356 =item Maximal count of pending signals (%d) exceeded
2358 (F) Perl aborted due to a too high number of signals pending. This
2359 usually indicates that your operating system tried to deliver signals
2360 too fast (with a very high priority), starving the perl process from
2361 resources it would need to reach a point where it can process signals
2362 safely. (See L<perlipc/"Deferred Signals (Safe Signals)">.)
2364 =item %s matches null string many times in regex; marked by <-- HERE in m/%s/
2366 (W regexp) The pattern you've specified would be an infinite loop if the
2367 regular expression engine didn't specifically check for that. The <-- HERE
2368 shows in the regular expression about where the problem was discovered.
2371 =item "%s" may clash with future reserved word
2373 (W) This warning may be due to running a perl5 script through a perl4
2374 interpreter, especially if the word that is being warned about is
2377 =item % may not be used in pack
2379 (F) You can't pack a string by supplying a checksum, because the
2380 checksumming process loses information, and you can't go the other way.
2381 See L<perlfunc/unpack>.
2383 =item Method for operation %s not found in package %s during blessing
2385 (F) An attempt was made to specify an entry in an overloading table that
2386 doesn't resolve to a valid subroutine. See L<overload>.
2388 =item Method %s not permitted
2392 =item Might be a runaway multi-line %s string starting on line %d
2394 (S) An advisory indicating that the previous error may have been caused
2395 by a missing delimiter on a string or pattern, because it eventually
2396 ended earlier on the current line.
2398 =item Misplaced _ in number
2400 (W syntax) An underscore (underbar) in a numeric constant did not
2401 separate two digits.
2403 =item Missing argument to -%c
2405 (F) The argument to the indicated command line switch must follow
2406 immediately after the switch, without intervening spaces.
2408 =item Missing %sbrace%s on \N{}
2410 (F) Wrong syntax of character name literal C<\N{charname}> within
2411 double-quotish context.
2413 =item Missing comma after first argument to %s function
2415 (F) While certain functions allow you to specify a filehandle or an
2416 "indirect object" before the argument list, this ain't one of them.
2418 =item Missing command in piped open
2420 (W pipe) You used the C<open(FH, "| command")> or
2421 C<open(FH, "command |")> construction, but the command was missing or
2424 =item Missing control char name in \c
2426 (F) A double-quoted string ended with "\c", without the required control
2429 =item Missing name in "my sub"
2431 (F) The reserved syntax for lexically scoped subroutines requires that
2432 they have a name with which they can be found.
2434 =item Missing $ on loop variable
2436 (F) Apparently you've been programming in B<csh> too much. Variables
2437 are always mentioned with the $ in Perl, unlike in the shells, where it
2438 can vary from one line to the next.
2440 =item (Missing operator before %s?)
2442 (S syntax) This is an educated guess made in conjunction with the message
2443 "%s found where operator expected". Often the missing operator is a comma.
2445 =item Missing right brace on %s
2447 (F) Missing right brace in C<\x{...}>, C<\p{...}> or C<\P{...}>.
2449 =item Missing right curly or square bracket
2451 (F) The lexer counted more opening curly or square brackets than closing
2452 ones. As a general rule, you'll find it's missing near the place you
2455 =item (Missing semicolon on previous line?)
2457 (S syntax) This is an educated guess made in conjunction with the message
2458 "%s found where operator expected". Don't automatically put a semicolon on
2459 the previous line just because you saw this message.
2461 =item Modification of a read-only value attempted
2463 (F) You tried, directly or indirectly, to change the value of a
2464 constant. You didn't, of course, try "2 = 1", because the compiler
2465 catches that. But an easy way to do the same thing is:
2467 sub mod { $_[0] = 1 }
2470 Another way is to assign to a substr() that's off the end of the string.
2472 Yet another way is to assign to a C<foreach> loop I<VAR> when I<VAR>
2473 is aliased to a constant in the look I<LIST>:
2476 foreach my $n ($x, 2) {
2477 $n *= 2; # modifies the $x, but fails on attempt to modify the 2
2480 =item Modification of non-creatable array value attempted, %s
2482 (F) You tried to make an array value spring into existence, and the
2483 subscript was probably negative, even counting from end of the array
2486 =item Modification of non-creatable hash value attempted, %s
2488 (P) You tried to make a hash value spring into existence, and it
2489 couldn't be created for some peculiar reason.
2491 =item Module name must be constant
2493 (F) Only a bare module name is allowed as the first argument to a "use".
2495 =item Module name required with -%c option
2497 (F) The C<-M> or C<-m> options say that Perl should load some module, but
2498 you omitted the name of the module. Consult L<perlrun> for full details
2499 about C<-M> and C<-m>.
2501 =item More than one argument to '%s' open
2503 (F) The C<open> function has been asked to open multiple files. This
2504 can happen if you are trying to open a pipe to a command that takes a
2505 list of arguments, but have forgotten to specify a piped open mode.
2506 See L<perlfunc/open> for details.
2508 =item msg%s not implemented
2510 (F) You don't have System V message IPC on your system.
2512 =item Multidimensional syntax %s not supported
2514 (W syntax) Multidimensional arrays aren't written like C<$foo[1,2,3]>.
2515 They're written like C<$foo[1][2][3]>, as in C.
2517 =item '/' must follow a numeric type in unpack
2519 (F) You had an unpack template that contained a '/', but this did not
2520 follow some unpack specification producing a numeric value.
2521 See L<perlfunc/pack>.
2523 =item "my sub" not yet implemented
2525 (F) Lexically scoped subroutines are not yet implemented. Don't try
2528 =item "%s" variable %s can't be in a package
2530 (F) Lexically scoped variables aren't in a package, so it doesn't make
2531 sense to try to declare one with a package qualifier on the front. Use
2532 local() if you want to localize a package variable.
2534 =item Name "%s::%s" used only once: possible typo
2536 (W once) Typographical errors often show up as unique variable names.
2537 If you had a good reason for having a unique name, then just mention it
2538 again somehow to suppress the message. The C<our> declaration is
2539 provided for this purpose.
2541 NOTE: This warning detects symbols that have been used only once so $c, @c,
2542 %c, *c, &c, sub c{}, c(), and c (the filehandle or format) are considered
2543 the same; if a program uses $c only once but also uses any of the others it
2544 will not trigger this warning.
2546 =item Negative '/' count in unpack
2548 (F) The length count obtained from a length/code unpack operation was
2549 negative. See L<perlfunc/pack>.
2551 =item Negative length
2553 (F) You tried to do a read/write/send/recv operation with a buffer
2554 length that is less than 0. This is difficult to imagine.
2556 =item Negative offset to vec in lvalue context
2558 (F) When C<vec> is called in an lvalue context, the second argument must be
2559 greater than or equal to zero.
2561 =item Nested quantifiers in regex; marked by <-- HERE in m/%s/
2563 (F) You can't quantify a quantifier without intervening parentheses. So
2564 things like ** or +* or ?* are illegal. The <-- HERE shows in the regular
2565 expression about where the problem was discovered.
2567 Note that the minimal matching quantifiers, C<*?>, C<+?>, and
2568 C<??> appear to be nested quantifiers, but aren't. See L<perlre>.
2570 =item %s never introduced
2572 (S internal) The symbol in question was declared but somehow went out of
2573 scope before it could possibly have been used.
2575 =item next::method/next::can/maybe::next::method cannot find enclosing method
2577 (F) C<next::method> needs to be called within the context of a
2578 real method in a real package, and it could not find such a context.
2581 =item No %s allowed while running setuid
2583 (F) Certain operations are deemed to be too insecure for a setuid or
2584 setgid script to even be allowed to attempt. Generally speaking there
2585 will be another way to do what you want that is, if not secure, at least
2586 securable. See L<perlsec>.
2588 =item No comma allowed after %s
2590 (F) A list operator that has a filehandle or "indirect object" is not
2591 allowed to have a comma between that and the following arguments.
2592 Otherwise it'd be just another one of the arguments.
2594 One possible cause for this is that you expected to have imported a
2595 constant to your name space with B<use> or B<import> while no such
2596 importing took place, it may for example be that your operating system
2597 does not support that particular constant. Hopefully you did use an
2598 explicit import list for the constants you expect to see, please see
2599 L<perlfunc/use> and L<perlfunc/import>. While an explicit import list
2600 would probably have caught this error earlier it naturally does not
2601 remedy the fact that your operating system still does not support that
2602 constant. Maybe you have a typo in the constants of the symbol import
2603 list of B<use> or B<import> or in the constant name at the line where
2604 this error was triggered?
2606 =item No command into which to pipe on command line
2608 (F) An error peculiar to VMS. Perl handles its own command line
2609 redirection, and found a '|' at the end of the command line, so it
2610 doesn't know where you want to pipe the output from this command.
2612 =item No DB::DB routine defined
2614 (F) The currently executing code was compiled with the B<-d> switch, but
2615 for some reason the current debugger (e.g. F<perl5db.pl> or a C<Devel::>
2616 module) didn't define a routine to be called at the beginning of each
2619 =item No dbm on this machine
2621 (P) This is counted as an internal error, because every machine should
2622 supply dbm nowadays, because Perl comes with SDBM. See L<SDBM_File>.
2624 =item No DB::sub routine defined
2626 (F) The currently executing code was compiled with the B<-d> switch, but
2627 for some reason the current debugger (e.g. F<perl5db.pl> or a C<Devel::>
2628 module) didn't define a C<DB::sub> routine to be called at the beginning
2629 of each ordinary subroutine call.
2631 =item No B<-e> allowed in setuid scripts
2633 (F) A setuid script can't be specified by the user.
2635 =item No error file after 2> or 2>> on command line
2637 (F) An error peculiar to VMS. Perl handles its own command line
2638 redirection, and found a '2>' or a '2>>' on the command line, but can't
2639 find the name of the file to which to write data destined for stderr.
2641 =item No group ending character '%c' found in template
2643 (F) A pack or unpack template has an opening '(' or '[' without its
2644 matching counterpart. See L<perlfunc/pack>.
2646 =item No input file after < on command line
2648 (F) An error peculiar to VMS. Perl handles its own command line
2649 redirection, and found a '<' on the command line, but can't find the
2650 name of the file from which to read data for stdin.
2654 (F) The setuid emulator requires that scripts have a well-formed #! line
2655 even on machines that don't support the #! construct.
2657 =item No next::method '%s' found for %s
2659 (F) C<next::method> found no further instances of this method name
2660 in the remaining packages of the MRO of this class. If you don't want
2661 it throwing an exception, use C<maybe::next::method>
2662 or C<next::can>. See L<mro>.
2664 =item "no" not allowed in expression
2666 (F) The "no" keyword is recognized and executed at compile time, and
2667 returns no useful value. See L<perlmod>.
2669 =item No output file after > on command line
2671 (F) An error peculiar to VMS. Perl handles its own command line
2672 redirection, and found a lone '>' at the end of the command line, so it
2673 doesn't know where you wanted to redirect stdout.
2675 =item No output file after > or >> on command line
2677 (F) An error peculiar to VMS. Perl handles its own command line
2678 redirection, and found a '>' or a '>>' on the command line, but can't
2679 find the name of the file to which to write data destined for stdout.
2681 =item No package name allowed for variable %s in "our"
2683 (F) Fully qualified variable names are not allowed in "our"
2684 declarations, because that doesn't make much sense under existing
2685 semantics. Such syntax is reserved for future extensions.
2687 =item No Perl script found in input
2689 (F) You called C<perl -x>, but no line was found in the file beginning
2690 with #! and containing the word "perl".
2692 =item No setregid available
2694 (F) Configure didn't find anything resembling the setregid() call for
2697 =item No setreuid available
2699 (F) Configure didn't find anything resembling the setreuid() call for
2702 =item No %s specified for -%c
2704 (F) The indicated command line switch needs a mandatory argument, but
2705 you haven't specified one.
2707 =item No such class field "%s" in variable %s of type %s
2709 (F) You tried to access a key from a hash through the indicated typed variable
2710 but that key is not allowed by the package of the same type. The indicated
2711 package has restricted the set of allowed keys using the L<fields> pragma.
2713 =item No such class %s
2715 (F) You provided a class qualifier in a "my", "our" or "state" declaration, but
2716 this class doesn't exist at this point in your program.
2718 =item No such hook: %s
2720 (F) You specified a signal hook that was not recognized by Perl. Currently, Perl
2721 accepts C<__DIE__> and C<__WARN__> as valid signal hooks
2723 =item No such pipe open
2725 (P) An error peculiar to VMS. The internal routine my_pclose() tried to
2726 close a pipe which hadn't been opened. This should have been caught
2727 earlier as an attempt to close an unopened filehandle.
2729 =item No such signal: SIG%s
2731 (W signal) You specified a signal name as a subscript to %SIG that was
2732 not recognized. Say C<kill -l> in your shell to see the valid signal
2733 names on your system.
2735 =item Not a CODE reference
2737 (F) Perl was trying to evaluate a reference to a code value (that is, a
2738 subroutine), but found a reference to something else instead. You can
2739 use the ref() function to find out what kind of ref it really was. See
2742 =item Not a format reference
2744 (F) I'm not sure how you managed to generate a reference to an anonymous
2745 format, but this indicates you did, and that it didn't exist.
2747 =item Not a GLOB reference
2749 (F) Perl was trying to evaluate a reference to a "typeglob" (that is, a
2750 symbol table entry that looks like C<*foo>), but found a reference to
2751 something else instead. You can use the ref() function to find out what
2752 kind of ref it really was. See L<perlref>.
2754 =item Not a HASH reference
2756 (F) Perl was trying to evaluate a reference to a hash value, but found a
2757 reference to something else instead. You can use the ref() function to
2758 find out what kind of ref it really was. See L<perlref>.
2760 =item Not an ARRAY reference
2762 (F) Perl was trying to evaluate a reference to an array value, but found
2763 a reference to something else instead. You can use the ref() function
2764 to find out what kind of ref it really was. See L<perlref>.
2766 =item Not a perl script
2768 (F) The setuid emulator requires that scripts have a well-formed #! line
2769 even on machines that don't support the #! construct. The line must
2772 =item Not a SCALAR reference
2774 (F) Perl was trying to evaluate a reference to a scalar value, but found
2775 a reference to something else instead. You can use the ref() function
2776 to find out what kind of ref it really was. See L<perlref>.
2778 =item Not a subroutine reference
2780 (F) Perl was trying to evaluate a reference to a code value (that is, a
2781 subroutine), but found a reference to something else instead. You can
2782 use the ref() function to find out what kind of ref it really was. See
2785 =item Not a subroutine reference in overload table
2787 (F) An attempt was made to specify an entry in an overloading table that
2788 doesn't somehow point to a valid subroutine. See L<overload>.
2790 =item Not enough arguments for %s
2792 (F) The function requires more arguments than you specified.
2794 =item Not enough format arguments
2796 (W syntax) A format specified more picture fields than the next line
2797 supplied. See L<perlform>.
2801 (A) You've accidentally run your script through the Bourne shell instead
2802 of Perl. Check the #! line, or manually feed your script into Perl
2805 =item no UTC offset information; assuming local time is UTC
2807 (S) A warning peculiar to VMS. Perl was unable to find the local
2808 timezone offset, so it's assuming that local system time is equivalent
2809 to UTC. If it's not, define the logical name
2810 F<SYS$TIMEZONE_DIFFERENTIAL> to translate to the number of seconds which
2811 need to be added to UTC to get local time.
2813 =item Non-string passed as bitmask
2815 (W misc) A number has been passed as a bitmask argument to select().
2816 Use the vec() function to construct the file descriptor bitmasks for
2817 select. See L<perlfunc/select>
2819 =item Null filename used
2821 (F) You can't require the null filename, especially because on many
2822 machines that means the current directory! See L<perlfunc/require>.
2824 =item NULL OP IN RUN
2826 (P debugging) Some internal routine called run() with a null opcode
2829 =item Null picture in formline
2831 (F) The first argument to formline must be a valid format picture
2832 specification. It was found to be empty, which probably means you
2833 supplied it an uninitialized value. See L<perlform>.
2837 (P) An attempt was made to realloc NULL.
2839 =item NULL regexp argument
2841 (P) The internal pattern matching routines blew it big time.
2843 =item NULL regexp parameter
2845 (P) The internal pattern matching routines are out of their gourd.
2847 =item Number too long
2849 (F) Perl limits the representation of decimal numbers in programs to
2850 about 250 characters. You've exceeded that length. Future
2851 versions of Perl are likely to eliminate this arbitrary limitation. In
2852 the meantime, try using scientific notation (e.g. "1e6" instead of
2855 =item Octal number in vector unsupported
2857 (F) Numbers with a leading C<0> are not currently allowed in vectors.
2858 The octal number interpretation of such numbers may be supported in a
2861 =item Octal number > 037777777777 non-portable
2863 (W portable) The octal number you specified is larger than 2**32-1
2864 (4294967295) and therefore non-portable between systems. See
2865 L<perlport> for more on portability concerns.
2867 See also L<perlport> for writing portable code.
2869 =item Odd number of arguments for overload::constant
2871 (W overload) The call to overload::constant contained an odd number of
2872 arguments. The arguments should come in pairs.
2874 =item Odd number of elements in anonymous hash
2876 (W misc) You specified an odd number of elements to initialize a hash,
2877 which is odd, because hashes come in key/value pairs.
2879 =item Odd number of elements in hash assignment
2881 (W misc) You specified an odd number of elements to initialize a hash,
2882 which is odd, because hashes come in key/value pairs.
2884 =item Offset outside string
2886 (F, W layer) You tried to do a read/write/send/recv/seek operation
2887 with an offset pointing outside the buffer. This is difficult to
2888 imagine. The sole exceptions to this are that zero padding will
2889 take place when going past the end of the string when either
2890 C<sysread()>ing a file, or when seeking past the end of a scalar opened
2891 for I/O (in anticipation of future reads and to imitate the behaviour
2894 =item %s() on unopened %s
2896 (W unopened) An I/O operation was attempted on a filehandle that was
2897 never initialized. You need to do an open(), a sysopen(), or a socket()
2898 call, or call a constructor from the FileHandle package.
2900 =item -%s on unopened filehandle %s
2902 (W unopened) You tried to invoke a file test operator on a filehandle
2903 that isn't open. Check your control flow. See also L<perlfunc/-X>.
2907 (S internal) An internal warning that the grammar is screwed up.
2911 (S internal) An internal warning that the grammar is screwed up.
2913 =item Opening dirhandle %s also as a file
2915 (W io deprecated) You used open() to associate a filehandle to
2916 a symbol (glob or scalar) that already holds a dirhandle.
2917 Although legal, this idiom might render your code confusing
2920 =item Opening filehandle %s also as a directory
2922 (W io deprecated) You used opendir() to associate a dirhandle to
2923 a symbol (glob or scalar) that already holds a filehandle.
2924 Although legal, this idiom might render your code confusing
2927 =item Operation "%s": no method found, %s
2929 (F) An attempt was made to perform an overloaded operation for which no
2930 handler was defined. While some handlers can be autogenerated in terms
2931 of other handlers, there is no default handler for any operation, unless
2932 C<fallback> overloading key is specified to be true. See L<overload>.
2934 =item Operator or semicolon missing before %s
2936 (S ambiguous) You used a variable or subroutine call where the parser
2937 was expecting an operator. The parser has assumed you really meant to
2938 use an operator, but this is highly likely to be incorrect. For
2939 example, if you say "*foo *foo" it will be interpreted as if you said
2942 =item "our" variable %s redeclared
2944 (W misc) You seem to have already declared the same global once before
2945 in the current lexical scope.
2947 =item Out of memory!
2949 (X) The malloc() function returned 0, indicating there was insufficient
2950 remaining memory (or virtual memory) to satisfy the request. Perl has
2951 no option but to exit immediately.
2953 At least in Unix you may be able to get past this by increasing your
2954 process datasize limits: in csh/tcsh use C<limit> and
2955 C<limit datasize n> (where C<n> is the number of kilobytes) to check
2956 the current limits and change them, and in ksh/bash/zsh use C<ulimit -a>
2957 and C<ulimit -d n>, respectively.
2959 =item Out of memory during %s extend
2961 (X) An attempt was made to extend an array, a list, or a string beyond
2962 the largest possible memory allocation.
2964 =item Out of memory during "large" request for %s
2966 (F) The malloc() function returned 0, indicating there was insufficient
2967 remaining memory (or virtual memory) to satisfy the request. However,
2968 the request was judged large enough (compile-time default is 64K), so a
2969 possibility to shut down by trapping this error is granted.
2971 =item Out of memory during request for %s
2973 (X|F) The malloc() function returned 0, indicating there was
2974 insufficient remaining memory (or virtual memory) to satisfy the
2977 The request was judged to be small, so the possibility to trap it
2978 depends on the way perl was compiled. By default it is not trappable.
2979 However, if compiled for this, Perl may use the contents of C<$^M> as an
2980 emergency pool after die()ing with this message. In this case the error
2981 is trappable I<once>, and the error message will include the line and file
2982 where the failed request happened.
2984 =item Out of memory during ridiculously large request
2986 (F) You can't allocate more than 2^31+"small amount" bytes. This error
2987 is most likely to be caused by a typo in the Perl program. e.g.,
2988 C<$arr[time]> instead of C<$arr[$time]>.
2990 =item Out of memory for yacc stack
2992 (F) The yacc parser wanted to grow its stack so it could continue
2993 parsing, but realloc() wouldn't give it more memory, virtual or
2996 =item '.' outside of string in pack
2998 (F) The argument to a '.' in your template tried to move the working
2999 position to before the start of the packed string being built.
3001 =item '@' outside of string in unpack
3003 (F) You had a template that specified an absolute position outside
3004 the string being unpacked. See L<perlfunc/pack>.
3006 =item '@' outside of string with malformed UTF-8 in unpack
3008 (F) You had a template that specified an absolute position outside
3009 the string being unpacked. The string being unpacked was also invalid
3010 UTF-8. See L<perlfunc/pack>.
3012 =item Overloaded dereference did not return a reference
3014 (F) An object with an overloaded dereference operator was dereferenced,
3015 but the overloaded operation did not return a reference. See
3018 =item Overloaded qr did not return a REGEXP
3020 (F) An object with a C<qr> overload was used as part of a match, but the
3021 overloaded operation didn't return a compiled regexp. See L<overload>.
3023 =item %s package attribute may clash with future reserved word: %s
3025 (W reserved) A lowercase attribute name was used that had a
3026 package-specific handler. That name might have a meaning to Perl itself
3027 some day, even though it doesn't yet. Perhaps you should use a
3028 mixed-case attribute name, instead. See L<attributes>.
3030 =item pack/unpack repeat count overflow
3032 (F) You can't specify a repeat count so large that it overflows your
3033 signed integers. See L<perlfunc/pack>.
3037 (W io) A single call to write() produced more lines than can fit on a
3038 page. See L<perlform>.
3042 (P) An internal error.
3044 =item panic: attempt to call %s in %s
3046 (P) One of the file test operators entered a code branch that calls
3047 an ACL related-function, but that function is not available on this
3048 platform. Earlier checks mean that it should not be possible to
3049 enter this branch on this platform.
3051 =item panic: ck_grep
3053 (P) Failed an internal consistency check trying to compile a grep.
3055 =item panic: ck_split
3057 (P) Failed an internal consistency check trying to compile a split.
3059 =item panic: corrupt saved stack index
3061 (P) The savestack was requested to restore more localized values than
3062 there are in the savestack.
3064 =item panic: del_backref
3066 (P) Failed an internal consistency check while trying to reset a weak
3069 =item panic: Devel::DProf inconsistent subroutine return
3071 (P) Devel::DProf called a subroutine that exited using goto(LABEL),
3072 last(LABEL) or next(LABEL). Leaving that way a subroutine called from
3073 an XSUB will lead very probably to a crash of the interpreter. This is
3074 a bug that will hopefully one day get fixed.
3078 (P) We popped the context stack to an eval context, and then discovered
3079 it wasn't an eval context.
3081 =item panic: do_subst
3083 (P) The internal pp_subst() routine was called with invalid operational
3086 =item panic: do_trans_%s
3088 (P) The internal do_trans routines were called with invalid operational
3091 =item panic: fold_constants JMPENV_PUSH returned %d
3093 (P) While attempting folding constants an exception other than an C<eval>
3098 (P) The library function frexp() failed, making printf("%f") impossible.
3102 (P) We popped the context stack to a context with the specified label,
3103 and then discovered it wasn't a context we know how to do a goto in.
3105 =item panic: hfreeentries failed to free hash
3107 (P) The internal routine used to clear a hashes entries tried repeatedly,
3108 but each time something added more entries to the hash. Most likely the hash
3109 contains an object with a reference back to the hash and a destructor that
3110 adds a new object to the hash.
3112 =item panic: INTERPCASEMOD
3114 (P) The lexer got into a bad state at a case modifier.
3116 =item panic: INTERPCONCAT
3118 (P) The lexer got into a bad state parsing a string with brackets.
3120 =item panic: kid popen errno read
3122 (F) forked child returned an incomprehensible message about its errno.
3126 (P) We popped the context stack to a block context, and then discovered
3127 it wasn't a block context.
3129 =item panic: leave_scope clearsv
3131 (P) A writable lexical variable became read-only somehow within the
3134 =item panic: leave_scope inconsistency
3136 (P) The savestack probably got out of sync. At least, there was an
3137 invalid enum on the top of it.
3139 =item panic: magic_killbackrefs
3141 (P) Failed an internal consistency check while trying to reset all weak
3142 references to an object.
3146 (P) Something requested a negative number of bytes of malloc.
3148 =item panic: memory wrap
3150 (P) Something tried to allocate more memory than possible.
3152 =item panic: pad_alloc
3154 (P) The compiler got confused about which scratch pad it was allocating
3155 and freeing temporaries and lexicals from.
3157 =item panic: pad_free curpad
3159 (P) The compiler got confused about which scratch pad it was allocating
3160 and freeing temporaries and lexicals from.
3162 =item panic: pad_free po
3164 (P) An invalid scratch pad offset was detected internally.
3166 =item panic: pad_reset curpad
3168 (P) The compiler got confused about which scratch pad it was allocating
3169 and freeing temporaries and lexicals from.
3171 =item panic: pad_sv po
3173 (P) An invalid scratch pad offset was detected internally.
3175 =item panic: pad_swipe curpad
3177 (P) The compiler got confused about which scratch pad it was allocating
3178 and freeing temporaries and lexicals from.
3180 =item panic: pad_swipe po
3182 (P) An invalid scratch pad offset was detected internally.
3184 =item panic: pp_iter
3186 (P) The foreach iterator got called in a non-loop context frame.
3188 =item panic: pp_match%s
3190 (P) The internal pp_match() routine was called with invalid operational
3193 =item panic: pp_split
3195 (P) Something terrible went wrong in setting up for the split.
3197 =item panic: realloc
3199 (P) Something requested a negative number of bytes of realloc.
3201 =item panic: restartop
3203 (P) Some internal routine requested a goto (or something like it), and
3204 didn't supply the destination.
3208 (P) We popped the context stack to a subroutine or eval context, and
3209 then discovered it wasn't a subroutine or eval context.
3211 =item panic: scan_num
3213 (P) scan_num() got called on something that wasn't a number.
3215 =item panic: sv_chop %s
3217 (P) The sv_chop() routine was passed a position that is not within the
3218 scalar's string buffer.
3220 =item panic: sv_insert
3222 (P) The sv_insert() routine was told to remove more string than there
3225 =item panic: top_env
3227 (P) The compiler attempted to do a goto, or something weird like that.
3229 =item panic: unimplemented op %s (#%d) called
3231 (P) The compiler is screwed up and attempted to use an op that isn't permitted
3234 =item panic: utf16_to_utf8: odd bytelen
3236 (P) Something tried to call utf16_to_utf8 with an odd (as opposed
3237 to even) byte length.
3239 =item panic: utf16_to_utf8_reversed: odd bytelen
3241 (P) Something tried to call utf16_to_utf8_reversed with an odd (as opposed
3242 to even) byte length.
3246 (P) The lexer got into a bad state while processing a case modifier.
3248 =item Pattern subroutine nesting without pos change exceeded limit in regex; marked by <-- HERE in m/%s/
3250 (F) You used a pattern that uses too many nested subpattern calls without
3251 consuming any text. Restructure the pattern so text is consumed before the
3252 nesting limit is exceeded.
3254 The <-- HERE shows in the regular expression about where the problem was
3257 =item Parentheses missing around "%s" list
3259 (W parenthesis) You said something like
3265 my ($foo, $bar) = @_;
3267 Remember that "my", "our", "local" and "state" bind tighter than comma.
3269 =item C<-p> destination: %s
3271 (F) An error occurred during the implicit output invoked by the C<-p>
3272 command-line switch. (This output goes to STDOUT unless you've
3273 redirected it with select().)
3275 =item (perhaps you forgot to load "%s"?)
3277 (F) This is an educated guess made in conjunction with the message
3278 "Can't locate object method \"%s\" via package \"%s\"". It often means
3279 that a method requires a package that has not been loaded.
3281 =item Perl_my_%s() not available
3283 (F) Your platform has very uncommon byte-order and integer size,
3284 so it was not possible to set up some or all fixed-width byte-order
3285 conversion functions. This is only a problem when you're using the
3286 '<' or '>' modifiers in (un)pack templates. See L<perlfunc/pack>.
3288 =item Perl_pmflag() is deprecated, and will be removed from the XS API
3290 (D deprecated) XS code called the C function C<Perl_pmflag>. This was part of
3291 Perl's listed public API for extending or embedding the perl interpreter. It has
3292 now been removed from the public API, and will be removed in a future release,
3293 hence XS code should be re-written not to use it.
3295 =item Perl %s required--this is only version %s, stopped
3297 (F) The module in question uses features of a version of Perl more
3298 recent than the currently running version. How long has it been since
3299 you upgraded, anyway? See L<perlfunc/require>.
3301 =item PERL_SH_DIR too long
3303 (F) An error peculiar to OS/2. PERL_SH_DIR is the directory to find the
3304 C<sh>-shell in. See "PERL_SH_DIR" in L<perlos2>.
3306 =item PERL_SIGNALS illegal: "%s"
3308 See L<perlrun/PERL_SIGNALS> for legal values.
3310 =item perl: warning: Setting locale failed.
3312 (S) The whole warning message will look something like:
3314 perl: warning: Setting locale failed.
3315 perl: warning: Please check that your locale settings:
3318 are supported and installed on your system.
3319 perl: warning: Falling back to the standard locale ("C").
3321 Exactly what were the failed locale settings varies. In the above the
3322 settings were that the LC_ALL was "En_US" and the LANG had no value.
3323 This error means that Perl detected that you and/or your operating
3324 system supplier and/or system administrator have set up the so-called
3325 locale system but Perl could not use those settings. This was not
3326 dead serious, fortunately: there is a "default locale" called "C" that
3327 Perl can and will use, the script will be run. Before you really fix
3328 the problem, however, you will get the same error message each time
3329 you run Perl. How to really fix the problem can be found in
3330 L<perllocale> section B<LOCALE PROBLEMS>.
3332 =item pid %x not a child
3334 (W exec) A warning peculiar to VMS. Waitpid() was asked to wait for a
3335 process which isn't a subprocess of the current process. While this is
3336 fine from VMS' perspective, it's probably not what you intended.
3338 =item 'P' must have an explicit size in unpack
3340 (F) The unpack format P must have an explicit size, not "*".
3342 =item POSIX class [:%s:] unknown in regex; marked by <-- HERE in m/%s/
3344 (F) The class in the character class [: :] syntax is unknown. The <-- HERE
3345 shows in the regular expression about where the problem was discovered.
3346 Note that the POSIX character classes do B<not> have the C<is> prefix
3347 the corresponding C interfaces have: in other words, it's C<[[:print:]]>,
3348 not C<isprint>. See L<perlre>.
3350 =item POSIX getpgrp can't take an argument
3352 (F) Your system has POSIX getpgrp(), which takes no argument, unlike
3353 the BSD version, which takes a pid.
3355 =item POSIX syntax [%s] belongs inside character classes in regex; marked by <-- HERE in m/%s/
3357 (W regexp) The character class constructs [: :], [= =], and [. .] go
3358 I<inside> character classes, the [] are part of the construct, for example:
3359 /[012[:alpha:]345]/. Note that [= =] and [. .] are not currently
3360 implemented; they are simply placeholders for future extensions and will
3361 cause fatal errors. The <-- HERE shows in the regular expression about
3362 where the problem was discovered. See L<perlre>.
3364 =item POSIX syntax [. .] is reserved for future extensions in regex; marked by <-- HERE in m/%s/
3366 (F regexp) Within regular expression character classes ([]) the syntax
3367 beginning with "[." and ending with ".]" is reserved for future extensions.
3368 If you need to represent those character sequences inside a regular
3369 expression character class, just quote the square brackets with the
3370 backslash: "\[." and ".\]". The <-- HERE shows in the regular expression
3371 about where the problem was discovered. See L<perlre>.
3373 =item POSIX syntax [= =] is reserved for future extensions in regex; marked by <-- HERE in m/%s/
3375 (F) Within regular expression character classes ([]) the syntax beginning
3376 with "[=" and ending with "=]" is reserved for future extensions. If you
3377 need to represent those character sequences inside a regular expression
3378 character class, just quote the square brackets with the backslash: "\[="
3379 and "=\]". The <-- HERE shows in the regular expression about where the
3380 problem was discovered. See L<perlre>.
3382 =item Possible attempt to put comments in qw() list
3384 (W qw) qw() lists contain items separated by whitespace; as with literal
3385 strings, comment characters are not ignored, but are instead treated as
3386 literal data. (You may have used different delimiters than the
3387 parentheses shown here; braces are also frequently used.)
3389 You probably wrote something like this:
3396 when you should have written this:
3403 If you really want comments, build your list the
3404 old-fashioned way, with quotes and commas:
3408 'b', # another comment
3411 =item Possible attempt to separate words with commas
3413 (W qw) qw() lists contain items separated by whitespace; therefore
3414 commas aren't needed to separate the items. (You may have used
3415 different delimiters than the parentheses shown here; braces are also
3418 You probably wrote something like this:
3422 which puts literal commas into some of the list items. Write it without
3423 commas if you don't want them to appear in your data:
3427 =item Possible memory corruption: %s overflowed 3rd argument
3429 (F) An ioctl() or fcntl() returned more than Perl was bargaining for.
3430 Perl guesses a reasonable buffer size, but puts a sentinel byte at the
3431 end of the buffer just in case. This sentinel byte got clobbered, and
3432 Perl assumes that memory is now corrupted. See L<perlfunc/ioctl>.
3434 =item Possible precedence problem on bitwise %c operator
3436 (W precedence) Your program uses a bitwise logical operator in conjunction
3437 with a numeric comparison operator, like this :
3439 if ($x & $y == 0) { ... }
3441 This expression is actually equivalent to C<$x & ($y == 0)>, due to the
3442 higher precedence of C<==>. This is probably not what you want. (If you
3443 really meant to write this, disable the warning, or, better, put the
3444 parentheses explicitly and write C<$x & ($y == 0)>).
3446 =item Possible unintended interpolation of %s in string
3448 (W ambiguous) You said something like `@foo' in a double-quoted string
3449 but there was no array C<@foo> in scope at the time. If you wanted a
3450 literal @foo, then write it as \@foo; otherwise find out what happened
3451 to the array you apparently lost track of.
3453 =item Possible unintended interpolation of $\ in regex
3455 (W ambiguous) You said something like C<m/$\/> in a regex.
3456 The regex C<m/foo$\s+bar/m> translates to: match the word 'foo', the output
3457 record separator (see L<perlvar/$\>) and the letter 's' (one time or more)
3458 followed by the word 'bar'.
3460 If this is what you intended then you can silence the warning by using
3461 C<m/${\}/> (for example: C<m/foo${\}s+bar/>).
3463 If instead you intended to match the word 'foo' at the end of the line
3464 followed by whitespace and the word 'bar' on the next line then you can use
3465 C<m/$(?)\/> (for example: C<m/foo$(?)\s+bar/>).
3467 =item Precedence problem: open %s should be open(%s)
3469 (S precedence) The old irregular construct
3473 is now misinterpreted as
3477 because of the strict regularization of Perl 5's grammar into unary and
3478 list operators. (The old open was a little of both.) You must put
3479 parentheses around the filehandle, or use the new "or" operator instead
3482 =item Premature end of script headers
3486 =item printf() on closed filehandle %s
3488 (W closed) The filehandle you're writing to got itself closed sometime
3489 before now. Check your control flow.
3491 =item print() on closed filehandle %s
3493 (W closed) The filehandle you're printing on got itself closed sometime
3494 before now. Check your control flow.
3496 =item Process terminated by SIG%s
3498 (W) This is a standard message issued by OS/2 applications, while *nix
3499 applications die in silence. It is considered a feature of the OS/2
3500 port. One can easily disable this by appropriate sighandlers, see
3501 L<perlipc/"Signals">. See also "Process terminated by SIGTERM/SIGINT"
3504 =item Prototype after '%c' for %s : %s
3506 (W syntax) A character follows % or @ in a prototype. This is useless,
3507 since % and @ gobble the rest of the subroutine arguments.
3509 =item Prototype mismatch: %s vs %s
3511 (S prototype) The subroutine being declared or defined had previously been
3512 declared or defined with a different function prototype.
3514 =item Prototype not terminated
3516 (F) You've omitted the closing parenthesis in a function prototype
3519 =item Quantifier follows nothing in regex; marked by <-- HERE in m/%s/
3521 (F) You started a regular expression with a quantifier. Backslash it if you
3522 meant it literally. The <-- HERE shows in the regular expression about
3523 where the problem was discovered. See L<perlre>.
3525 =item Quantifier in {,} bigger than %d in regex; marked by <-- HERE in m/%s/
3527 (F) There is currently a limit to the size of the min and max values of the
3528 {min,max} construct. The <-- HERE shows in the regular expression about where
3529 the problem was discovered. See L<perlre>.
3531 =item Quantifier unexpected on zero-length expression; marked by <-- HERE in m/%s/
3533 (W regexp) You applied a regular expression quantifier in a place where
3534 it makes no sense, such as on a zero-width assertion. Try putting the
3535 quantifier inside the assertion instead. For example, the way to match
3536 "abc" provided that it is followed by three repetitions of "xyz" is
3537 C</abc(?=(?:xyz){3})/>, not C</abc(?=xyz){3}/>.
3539 The <-- HERE shows in the regular expression about where the problem was
3542 =item Range iterator outside integer range
3544 (F) One (or both) of the numeric arguments to the range operator ".."
3545 are outside the range which can be represented by integers internally.
3546 One possible workaround is to force Perl to use magical string increment
3547 by prepending "0" to your numbers.
3549 =item readdir() attempted on invalid dirhandle %s
3551 (W io) The dirhandle you're reading from is either closed or not really
3552 a dirhandle. Check your control flow.
3554 =item readline() on closed filehandle %s
3556 (W closed) The filehandle you're reading from got itself closed sometime
3557 before now. Check your control flow.
3559 =item read() on closed filehandle %s
3561 (W closed) You tried to read from a closed filehandle.
3563 =item read() on unopened filehandle %s
3565 (W unopened) You tried to read from a filehandle that was never opened.
3567 =item Reallocation too large: %lx
3569 (F) You can't allocate more than 64K on an MS-DOS machine.
3571 =item realloc() of freed memory ignored
3573 (S malloc) An internal routine called realloc() on something that had
3576 =item Recompile perl with B<-D>DEBUGGING to use B<-D> switch
3578 (F debugging) You can't use the B<-D> option unless the code to produce
3579 the desired output is compiled into Perl, which entails some overhead,
3580 which is why it's currently left out of your copy.
3582 =item Recursive inheritance detected in package '%s'
3584 (F) While calculating the method resolution order (MRO) of a package, Perl
3585 believes it found an infinite loop in the C<@ISA> hierarchy. This is a
3586 crude check that bails out after 100 levels of C<@ISA> depth.
3588 =item Recursive inheritance detected while looking for method %s
3590 (F) More than 100 levels of inheritance were encountered while invoking
3591 a method. Probably indicates an unintended loop in your inheritance
3594 =item Reference found where even-sized list expected
3596 (W misc) You gave a single reference where Perl was expecting a list
3597 with an even number of elements (for assignment to a hash). This usually
3598 means that you used the anon hash constructor when you meant to use
3599 parens. In any case, a hash requires key/value B<pairs>.
3601 %hash = { one => 1, two => 2, }; # WRONG
3602 %hash = [ qw/ an anon array / ]; # WRONG
3603 %hash = ( one => 1, two => 2, ); # right
3604 %hash = qw( one 1 two 2 ); # also fine
3606 =item Reference is already weak
3608 (W misc) You have attempted to weaken a reference that is already weak.
3609 Doing so has no effect.
3611 =item Reference miscount in sv_replace()
3613 (W internal) The internal sv_replace() function was handed a new SV with
3614 a reference count of other than 1.
3616 =item Reference to invalid group 0
3618 (F) You used C<\g0> or similar in a regular expression. You may refer to
3619 capturing parentheses only with strictly positive integers (normal
3620 backreferences) or with strictly negative integers (relative
3621 backreferences), but using 0 does not make sense.
3623 =item Reference to nonexistent group in regex; marked by <-- HERE in m/%s/
3625 (F) You used something like C<\7> in your regular expression, but there are
3626 not at least seven sets of capturing parentheses in the expression. If you
3627 wanted to have the character with value 7 inserted into the regular expression,
3628 prepend a zero to make the number at least two digits: C<\07>
3630 The <-- HERE shows in the regular expression about where the problem was
3633 =item Reference to nonexistent or unclosed group in regex; marked by <-- HERE in m/%s/
3635 (F) You used something like C<\g{-7}> in your regular expression, but there are
3636 not at least seven sets of closed capturing parentheses in the expression before
3637 where the C<\g{-7}> was located.
3639 The <-- HERE shows in the regular expression about where the problem was
3642 =item Reference to nonexistent named group in regex; marked by <-- HERE in m/%s/
3644 (F) You used something like C<\k'NAME'> or C<< \k<NAME> >> in your regular
3645 expression, but there is no corresponding named capturing parentheses such
3646 as C<(?'NAME'...)> or C<(?<NAME>...). Check if the name has been spelled
3647 correctly both in the backreference and the declaration.
3649 The <-- HERE shows in the regular expression about where the problem was
3652 =item (?(DEFINE)....) does not allow branches in regex; marked by <-- HERE in m/%s/
3654 (F) You used something like C<(?(DEFINE)...|..)> which is illegal. The
3655 most likely cause of this error is that you left out a parenthesis inside
3656 of the C<....> part.
3658 The <-- HERE shows in the regular expression about where the problem was
3661 =item regexp memory corruption
3663 (P) The regular expression engine got confused by what the regular
3664 expression compiler gave it.
3666 =item Regexp out of space
3668 (P) A "can't happen" error, because safemalloc() should have caught it
3671 =item Repeated format line will never terminate (~~ and @# incompatible)
3673 (F) Your format contains the ~~ repeat-until-blank sequence and a
3674 numeric field that will never go blank so that the repetition never
3675 terminates. You might use ^# instead. See L<perlform>.
3677 =item Replacement list is longer than search list
3679 (W misc) You have used a replacement list that is longer than the
3680 search list. So the additional elements in the replacement list
3683 =item Reversed %s= operator
3685 (W syntax) You wrote your assignment operator backwards. The = must
3686 always comes last, to avoid ambiguity with subsequent unary operators.
3688 =item rewinddir() attempted on invalid dirhandle %s
3690 (W io) The dirhandle you tried to do a rewinddir() on is either closed or not
3691 really a dirhandle. Check your control flow.
3693 =item Scalars leaked: %d
3695 (P) Something went wrong in Perl's internal bookkeeping of scalars:
3696 not all scalar variables were deallocated by the time Perl exited.
3697 What this usually indicates is a memory leak, which is of course bad,
3698 especially if the Perl program is intended to be long-running.
3700 =item Scalar value @%s[%s] better written as $%s[%s]
3702 (W syntax) You've used an array slice (indicated by @) to select a
3703 single element of an array. Generally it's better to ask for a scalar
3704 value (indicated by $). The difference is that C<$foo[&bar]> always
3705 behaves like a scalar, both when assigning to it and when evaluating its
3706 argument, while C<@foo[&bar]> behaves like a list when you assign to it,
3707 and provides a list context to its subscript, which can do weird things
3708 if you're expecting only one subscript.
3710 On the other hand, if you were actually hoping to treat the array
3711 element as a list, you need to look into how references work, because
3712 Perl will not magically convert between scalars and lists for you. See
3715 =item Scalar value @%s{%s} better written as $%s{%s}
3717 (W syntax) You've used a hash slice (indicated by @) to select a single
3718 element of a hash. Generally it's better to ask for a scalar value
3719 (indicated by $). The difference is that C<$foo{&bar}> always behaves
3720 like a scalar, both when assigning to it and when evaluating its
3721 argument, while C<@foo{&bar}> behaves like a list when you assign to it,
3722 and provides a list context to its subscript, which can do weird things
3723 if you're expecting only one subscript.
3725 On the other hand, if you were actually hoping to treat the hash element
3726 as a list, you need to look into how references work, because Perl will
3727 not magically convert between scalars and lists for you. See
3730 =item Search pattern not terminated
3732 (F) The lexer couldn't find the final delimiter of a // or m{}
3733 construct. Remember that bracketing delimiters count nesting level.
3734 Missing the leading C<$> from a variable C<$m> may cause this error.
3736 Note that since Perl 5.9.0 a // can also be the I<defined-or>
3737 construct, not just the empty search pattern. Therefore code written
3738 in Perl 5.9.0 or later that uses the // as the I<defined-or> can be
3739 misparsed by pre-5.9.0 Perls as a non-terminated search pattern.
3741 =item Search pattern not terminated or ternary operator parsed as search pattern
3743 (F) The lexer couldn't find the final delimiter of a C<?PATTERN?>
3746 The question mark is also used as part of the ternary operator (as in
3747 C<foo ? 0 : 1>) leading to some ambiguous constructions being wrongly
3748 parsed. One way to disambiguate the parsing is to put parentheses around
3749 the conditional expression, i.e. C<(foo) ? 0 : 1>.
3751 =item %sseek() on unopened filehandle
3753 (W unopened) You tried to use the seek() or sysseek() function on a
3754 filehandle that was either never opened or has since been closed.
3756 =item seekdir() attempted on invalid dirhandle %s
3758 (W io) The dirhandle you are doing a seekdir() on is either closed or not
3759 really a dirhandle. Check your control flow.
3761 =item select not implemented
3763 (F) This machine doesn't implement the select() system call.
3765 =item Self-ties of arrays and hashes are not supported
3767 (F) Self-ties are of arrays and hashes are not supported in
3768 the current implementation.
3770 =item Semicolon seems to be missing
3772 (W semicolon) A nearby syntax error was probably caused by a missing
3773 semicolon, or possibly some other missing operator, such as a comma.
3775 =item semi-panic: attempt to dup freed string
3777 (S internal) The internal newSVsv() routine was called to duplicate a
3778 scalar that had previously been marked as free.
3780 =item sem%s not implemented
3782 (F) You don't have System V semaphore IPC on your system.
3784 =item send() on closed socket %s
3786 (W closed) The socket you're sending to got itself closed sometime
3787 before now. Check your control flow.
3789 =item Sequence (? incomplete in regex; marked by <-- HERE in m/%s/
3791 (F) A regular expression ended with an incomplete extension (?. The <-- HERE
3792 shows in the regular expression about where the problem was discovered. See
3795 =item Sequence (?%s...) not implemented in regex; marked by <-- HERE in m/%s/
3797 (F) A proposed regular expression extension has the character reserved but
3798 has not yet been written. The <-- HERE shows in the regular expression about
3799 where the problem was discovered. See L<perlre>.
3801 =item Sequence (?%s...) not recognized in regex; marked by <-- HERE in m/%s/
3803 (F) You used a regular expression extension that doesn't make sense. The
3804 <-- HERE shows in the regular expression about where the problem was
3805 discovered. See L<perlre>.
3807 =item Sequence \\%s... not terminated in regex; marked by <-- HERE in m/%s/
3809 (F) The regular expression expects a mandatory argument following the escape
3810 sequence and this has been omitted or incorrectly written.
3812 =item Sequence (?#... not terminated in regex; marked by <-- HERE in m/%s/
3814 (F) A regular expression comment must be terminated by a closing
3815 parenthesis. Embedded parentheses aren't allowed. The <-- HERE shows in
3816 the regular expression about where the problem was discovered. See
3819 =item Sequence (?{...}) not terminated or not {}-balanced in regex; marked by <-- HERE in m/%s/
3821 (F) If the contents of a (?{...}) clause contains braces, they must balance
3822 for Perl to properly detect the end of the clause. The <-- HERE shows in
3823 the regular expression about where the problem was discovered. See
3826 =item 500 Server error
3832 This is the error message generally seen in a browser window when trying
3833 to run a CGI program (including SSI) over the web. The actual error text
3834 varies widely from server to server. The most frequently-seen variants
3835 are "500 Server error", "Method (something) not permitted", "Document
3836 contains no data", "Premature end of script headers", and "Did not
3837 produce a valid header".
3839 B<This is a CGI error, not a Perl error>.
3841 You need to make sure your script is executable, is accessible by the
3842 user CGI is running the script under (which is probably not the user
3843 account you tested it under), does not rely on any environment variables
3844 (like PATH) from the user it isn't running under, and isn't in a
3845 location where the CGI server can't find it, basically, more or less.
3846 Please see the following for more information:
3848 http://www.perl.org/CGI_MetaFAQ.html
3849 http://www.htmlhelp.org/faq/cgifaq.html
3850 http://www.w3.org/Security/Faq/
3852 You should also look at L<perlfaq9>.
3854 =item setegid() not implemented
3856 (F) You tried to assign to C<$)>, and your operating system doesn't
3857 support the setegid() system call (or equivalent), or at least Configure
3860 =item seteuid() not implemented
3862 (F) You tried to assign to C<< $> >>, and your operating system doesn't
3863 support the seteuid() system call (or equivalent), or at least Configure
3866 =item setpgrp can't take arguments
3868 (F) Your system has the setpgrp() from BSD 4.2, which takes no
3869 arguments, unlike POSIX setpgid(), which takes a process ID and process
3872 =item setrgid() not implemented
3874 (F) You tried to assign to C<$(>, and your operating system doesn't
3875 support the setrgid() system call (or equivalent), or at least Configure
3878 =item setruid() not implemented
3880 (F) You tried to assign to C<$<>, and your operating system doesn't
3881 support the setruid() system call (or equivalent), or at least Configure
3884 =item setsockopt() on closed socket %s
3886 (W closed) You tried to set a socket option on a closed socket. Did you
3887 forget to check the return value of your socket() call? See
3888 L<perlfunc/setsockopt>.
3890 =item Setuid/gid script is writable by world
3892 (F) The setuid emulator won't run a script that is writable by the
3893 world, because the world might have written on it already.
3895 =item Setuid script not plain file
3897 (F) The setuid emulator won't run a script that isn't read from a file,
3898 but from a socket, a pipe or another device.
3900 =item shm%s not implemented
3902 (F) You don't have System V shared memory IPC on your system.
3904 =item !=~ should be !~
3906 (W syntax) The non-matching operator is !~, not !=~. !=~ will be
3907 interpreted as the != (numeric not equal) and ~ (1's complement)
3908 operators: probably not what you intended.
3910 =item <> should be quotes
3912 (F) You wrote C<< require <file> >> when you should have written
3915 =item /%s/ should probably be written as "%s"
3917 (W syntax) You have used a pattern where Perl expected to find a string,
3918 as in the first argument to C<join>. Perl will treat the true or false
3919 result of matching the pattern against $_ as the string, which is
3920 probably not what you had in mind.
3922 =item shutdown() on closed socket %s
3924 (W closed) You tried to do a shutdown on a closed socket. Seems a bit
3927 =item SIG%s handler "%s" not defined
3929 (W signal) The signal handler named in %SIG doesn't, in fact, exist.
3930 Perhaps you put it into the wrong package?
3932 =item Smart matching a non-overloaded object breaks encapsulation
3934 (F) You should not use the C<~~> operator on an object that does not
3935 overload it: Perl refuses to use the object's underlying structure for
3938 =item sort is now a reserved word
3940 (F) An ancient error message that almost nobody ever runs into anymore.
3941 But before sort was a keyword, people sometimes used it as a filehandle.
3943 =item Sort subroutine didn't return single value
3945 (F) A sort comparison subroutine may not return a list value with more
3946 or less than one element. See L<perlfunc/sort>.
3948 =item splice() offset past end of array
3950 (W misc) You attempted to specify an offset that was past the end of
3951 the array passed to splice(). Splicing will instead commence at the end
3952 of the array, rather than past it. If this isn't what you want, try
3953 explicitly pre-extending the array by assigning $#array = $offset. See
3958 (P) The split was looping infinitely. (Obviously, a split shouldn't
3959 iterate more times than there are characters of input, which is what
3960 happened.) See L<perlfunc/split>.
3962 =item Statement unlikely to be reached
3964 (W exec) You did an exec() with some statement after it other than a
3965 die(). This is almost always an error, because exec() never returns
3966 unless there was a failure. You probably wanted to use system()
3967 instead, which does return. To suppress this warning, put the exec() in
3970 =item stat() on unopened filehandle %s
3972 (W unopened) You tried to use the stat() function on a filehandle that
3973 was either never opened or has since been closed.
3975 =item Stub found while resolving method "%s" overloading "%s" in package "%s"
3977 (P) Overloading resolution over @ISA tree may be broken by importation
3978 stubs. Stubs should never be implicitly created, but explicit calls to
3979 C<can> may break this.
3981 =item Subroutine %s redefined
3983 (W redefine) You redefined a subroutine. To suppress this warning, say
3986 no warnings 'redefine';
3987 eval "sub name { ... }";
3990 =item Substitution loop
3992 (P) The substitution was looping infinitely. (Obviously, a substitution
3993 shouldn't iterate more times than there are characters of input, which
3994 is what happened.) See the discussion of substitution in
3995 L<perlop/"Regexp Quote-Like Operators">.
3997 =item Substitution pattern not terminated
3999 (F) The lexer couldn't find the interior delimiter of an s/// or s{}{}
4000 construct. Remember that bracketing delimiters count nesting level.
4001 Missing the leading C<$> from variable C<$s> may cause this error.
4003 =item Substitution replacement not terminated
4005 (F) The lexer couldn't find the final delimiter of an s/// or s{}{}
4006 construct. Remember that bracketing delimiters count nesting level.
4007 Missing the leading C<$> from variable C<$s> may cause this error.
4009 =item substr outside of string
4011 (W substr),(F) You tried to reference a substr() that pointed outside of
4012 a string. That is, the absolute value of the offset was larger than the
4013 length of the string. See L<perlfunc/substr>. This warning is fatal if
4014 substr is used in an lvalue context (as the left hand side of an
4015 assignment or as a subroutine argument for example).
4017 =item sv_upgrade from type %d down to type %d
4019 (P) Perl tried to force the upgrade an SV to a type which was actually
4020 inferior to its current type.
4022 =item Switch (?(condition)... contains too many branches in regex; marked by <-- HERE in m/%s/
4024 (F) A (?(condition)if-clause|else-clause) construct can have at most two
4025 branches (the if-clause and the else-clause). If you want one or both to
4026 contain alternation, such as using C<this|that|other>, enclose it in
4027 clustering parentheses:
4029 (?(condition)(?:this|that|other)|else-clause)
4031 The <-- HERE shows in the regular expression about where the problem was
4032 discovered. See L<perlre>.
4034 =item Switch condition not recognized in regex; marked by <-- HERE in m/%s/
4036 (F) If the argument to the (?(...)if-clause|else-clause) construct is a
4037 number, it can be only a number. The <-- HERE shows in the regular expression
4038 about where the problem was discovered. See L<perlre>.
4040 =item switching effective %s is not implemented
4042 (F) While under the C<use filetest> pragma, we cannot switch the real
4043 and effective uids or gids.
4047 (F) The final summary message when a C<perl -c> succeeds.
4051 (F) Probably means you had a syntax error. Common reasons include:
4053 A keyword is misspelled.
4054 A semicolon is missing.
4056 An opening or closing parenthesis is missing.
4057 An opening or closing brace is missing.
4058 A closing quote is missing.
4060 Often there will be another error message associated with the syntax
4061 error giving more information. (Sometimes it helps to turn on B<-w>.)
4062 The error message itself often tells you where it was in the line when
4063 it decided to give up. Sometimes the actual error is several tokens
4064 before this, because Perl is good at understanding random input.
4065 Occasionally the line number may be misleading, and once in a blue moon
4066 the only way to figure out what's triggering the error is to call
4067 C<perl -c> repeatedly, chopping away half the program each time to see
4068 if the error went away. Sort of the cybernetic version of S<20
4071 =item syntax error at line %d: `%s' unexpected
4073 (A) You've accidentally run your script through the Bourne shell instead
4074 of Perl. Check the #! line, or manually feed your script into Perl
4077 =item syntax error in file %s at line %d, next 2 tokens "%s"
4079 (F) This error is likely to occur if you run a perl5 script through
4080 a perl4 interpreter, especially if the next 2 tokens are "use strict"
4081 or "my $var" or "our $var".
4083 =item sysread() on closed filehandle %s
4085 (W closed) You tried to read from a closed filehandle.
4087 =item sysread() on unopened filehandle %s
4089 (W unopened) You tried to read from a filehandle that was never opened.
4091 =item System V %s is not implemented on this machine
4093 (F) You tried to do something with a function beginning with "sem",
4094 "shm", or "msg" but that System V IPC is not implemented in your
4095 machine. In some machines the functionality can exist but be
4096 unconfigured. Consult your system support.
4098 =item syswrite() on closed filehandle %s
4100 (W closed) The filehandle you're writing to got itself closed sometime
4101 before now. Check your control flow.
4103 =item C<-T> and C<-B> not implemented on filehandles
4105 (F) Perl can't peek at the stdio buffer of filehandles when it doesn't
4106 know about your kind of stdio. You'll have to use a filename instead.
4108 =item Target of goto is too deeply nested
4110 (F) You tried to use C<goto> to reach a label that was too deeply nested
4111 for Perl to reach. Perl is doing you a favor by refusing.
4113 =item tell() on unopened filehandle
4115 (W unopened) You tried to use the tell() function on a filehandle that
4116 was either never opened or has since been closed.
4118 =item telldir() attempted on invalid dirhandle %s
4120 (W io) The dirhandle you tried to telldir() is either closed or not really
4121 a dirhandle. Check your control flow.
4123 =item That use of $[ is unsupported
4125 (F) Assignment to C<$[> is now strictly circumscribed, and interpreted
4126 as a compiler directive. You may say only one of
4135 This is to prevent the problem of one module changing the array base out
4136 from under another module inadvertently. See L<perlvar/$[>.
4138 =item The crypt() function is unimplemented due to excessive paranoia
4140 (F) Configure couldn't find the crypt() function on your machine,
4141 probably because your vendor didn't supply it, probably because they
4142 think the U.S. Government thinks it's a secret, or at least that they
4143 will continue to pretend that it is. And if you quote me on that, I
4146 =item The %s function is unimplemented
4148 The function indicated isn't implemented on this architecture, according
4149 to the probings of Configure.
4151 =item The stat preceding %s wasn't an lstat
4153 (F) It makes no sense to test the current stat buffer for symbolic
4154 linkhood if the last stat that wrote to the stat buffer already went
4155 past the symlink to get to the real file. Use an actual filename
4158 =item The 'unique' attribute may only be applied to 'our' variables
4160 (F) This attribute was never supported on C<my> or C<sub> declarations.
4162 =item This Perl can't reset CRTL environ elements (%s)
4164 =item This Perl can't set CRTL environ elements (%s=%s)
4166 (W internal) Warnings peculiar to VMS. You tried to change or delete an
4167 element of the CRTL's internal environ array, but your copy of Perl
4168 wasn't built with a CRTL that contained the setenv() function. You'll
4169 need to rebuild Perl with a CRTL that does, or redefine
4170 F<PERL_ENV_TABLES> (see L<perlvms>) so that the environ array isn't the
4171 target of the change to
4172 %ENV which produced the warning.
4174 =item thread failed to start: %s
4176 (W threads)(S) The entry point function of threads->create() failed for some reason.
4178 =item times not implemented
4180 (F) Your version of the C library apparently doesn't do times(). I
4181 suspect you're not running on Unix.
4183 =item "-T" is on the #! line, it must also be used on the command line
4185 (X) The #! line (or local equivalent) in a Perl script contains the
4186 B<-T> option (or the B<-t> option), but Perl was not invoked with B<-T> in its command line.
4187 This is an error because, by the time Perl discovers a B<-T> in a
4188 script, it's too late to properly taint everything from the environment.
4191 If the Perl script is being executed as a command using the #!
4192 mechanism (or its local equivalent), this error can usually be fixed by
4193 editing the #! line so that the B<-%c> option is a part of Perl's first
4194 argument: e.g. change C<perl -n -%c> to C<perl -%c -n>.
4196 If the Perl script is being executed as C<perl scriptname>, then the
4197 B<-%c> option must appear on the command line: C<perl -%c scriptname>.
4199 =item To%s: illegal mapping '%s'
4201 (F) You tried to define a customized To-mapping for lc(), lcfirst,
4202 uc(), or ucfirst() (or their string-inlined versions), but you
4203 specified an illegal mapping.
4204 See L<perlunicode/"User-Defined Character Properties">.
4206 =item Too deeply nested ()-groups
4208 (F) Your template contains ()-groups with a ridiculously deep nesting level.
4210 =item Too few args to syscall
4212 (F) There has to be at least one argument to syscall() to specify the
4213 system call to call, silly dilly.
4215 =item Too late for "-%s" option
4217 (X) The #! line (or local equivalent) in a Perl script contains the
4218 B<-M>, B<-m> or B<-C> option.
4220 In the case of B<-M> and B<-m>, this is an error because those options are
4221 not intended for use inside scripts. Use the C<use> pragma instead.
4223 The B<-C> option only works if it is specified on the command line as well
4224 (with the same sequence of letters or numbers following). Either specify
4225 this option on the command line, or, if your system supports it, make your
4226 script executable and run it directly instead of passing it to perl.
4228 =item Too late to run %s block
4230 (W void) A CHECK or INIT block is being defined during run time proper,
4231 when the opportunity to run them has already passed. Perhaps you are
4232 loading a file with C<require> or C<do> when you should be using C<use>
4233 instead. Or perhaps you should put the C<require> or C<do> inside a
4236 =item Too many args to syscall
4238 (F) Perl supports a maximum of only 14 args to syscall().
4240 =item Too many arguments for %s
4242 (F) The function requires fewer arguments than you specified.
4246 (A) You've accidentally run your script through B<csh> instead of Perl.
4247 Check the #! line, or manually feed your script into Perl yourself.
4251 (A) You've accidentally run your script through B<csh> instead of Perl.
4252 Check the #! line, or manually feed your script into Perl yourself.
4254 =item Trailing \ in regex m/%s/
4256 (F) The regular expression ends with an unbackslashed backslash.
4257 Backslash it. See L<perlre>.
4259 =item Transliteration pattern not terminated
4261 (F) The lexer couldn't find the interior delimiter of a tr/// or tr[][]
4262 or y/// or y[][] construct. Missing the leading C<$> from variables
4263 C<$tr> or C<$y> may cause this error.
4265 =item Transliteration replacement not terminated
4267 (F) The lexer couldn't find the final delimiter of a tr///, tr[][],
4268 y/// or y[][] construct.
4270 =item '%s' trapped by operation mask
4272 (F) You tried to use an operator from a Safe compartment in which it's
4273 disallowed. See L<Safe>.
4275 =item truncate not implemented
4277 (F) Your machine doesn't implement a file truncation mechanism that
4278 Configure knows about.
4280 =item Type of arg %d to %s must be %s (not %s)
4282 (F) This function requires the argument in that position to be of a
4283 certain type. Arrays must be @NAME or C<@{EXPR}>. Hashes must be
4284 %NAME or C<%{EXPR}>. No implicit dereferencing is allowed--use the
4285 {EXPR} forms as an explicit dereference. See L<perlref>.
4287 =item umask not implemented
4289 (F) Your machine doesn't implement the umask function and you tried to
4290 use it to restrict permissions for yourself (EXPR & 0700).
4292 =item Unable to create sub named "%s"
4294 (F) You attempted to create or access a subroutine with an illegal name.
4296 =item Unbalanced context: %d more PUSHes than POPs
4298 (W internal) The exit code detected an internal inconsistency in how
4299 many execution contexts were entered and left.
4301 =item Unbalanced saves: %d more saves than restores
4303 (W internal) The exit code detected an internal inconsistency in how
4304 many values were temporarily localized.
4306 =item Unbalanced scopes: %d more ENTERs than LEAVEs
4308 (W internal) The exit code detected an internal inconsistency in how
4309 many blocks were entered and left.
4311 =item Unbalanced tmps: %d more allocs than frees
4313 (W internal) The exit code detected an internal inconsistency in how
4314 many mortal scalars were allocated and freed.
4316 =item Undefined format "%s" called
4318 (F) The format indicated doesn't seem to exist. Perhaps it's really in
4319 another package? See L<perlform>.
4321 =item Undefined sort subroutine "%s" called
4323 (F) The sort comparison routine specified doesn't seem to exist.
4324 Perhaps it's in a different package? See L<perlfunc/sort>.
4326 =item Undefined subroutine &%s called
4328 (F) The subroutine indicated hasn't been defined, or if it was, it has
4329 since been undefined.
4331 =item Undefined subroutine called
4333 (F) The anonymous subroutine you're trying to call hasn't been defined,
4334 or if it was, it has since been undefined.
4336 =item Undefined subroutine in sort
4338 (F) The sort comparison routine specified is declared but doesn't seem
4339 to have been defined yet. See L<perlfunc/sort>.
4341 =item Undefined top format "%s" called
4343 (F) The format indicated doesn't seem to exist. Perhaps it's really in
4344 another package? See L<perlform>.
4346 =item Undefined value assigned to typeglob
4348 (W misc) An undefined value was assigned to a typeglob, a la
4349 C<*foo = undef>. This does nothing. It's possible that you really mean
4352 =item %s: Undefined variable
4354 (A) You've accidentally run your script through B<csh> instead of Perl.
4355 Check the #! line, or manually feed your script into Perl yourself.
4357 =item unexec of %s into %s failed!
4359 (F) The unexec() routine failed for some reason. See your local FSF
4360 representative, who probably put it there in the first place.
4362 =item Unicode non-character %s is illegal for interchange
4364 (W utf8) Certain codepoints, such as U+FFFE and U+FFFF, are defined by the
4365 Unicode standard to be non-characters. Those are legal codepoints, but are
4366 reserved for internal use; so, applications shouldn't attempt to exchange
4367 them. If you know what you are doing you can turn off this warning by
4368 C<no warnings 'utf8';>.
4370 =item Unknown BYTEORDER
4372 (F) There are no byte-swapping functions for a machine with this byte
4375 =item Unknown open() mode '%s'
4377 (F) The second argument of 3-argument open() is not among the list
4378 of valid modes: C<< < >>, C<< > >>, C<<< >> >>>, C<< +< >>,
4379 C<< +> >>, C<<< +>> >>>, C<-|>, C<|->, C<< <& >>, C<< >& >>.
4381 =item Unknown PerlIO layer "%s"
4383 (W layer) An attempt was made to push an unknown layer onto the Perl I/O
4384 system. (Layers take care of transforming data between external and
4385 internal representations.) Note that some layers, such as C<mmap>,
4386 are not supported in all environments. If your program didn't
4387 explicitly request the failing operation, it may be the result of the
4388 value of the environment variable PERLIO.
4390 =item Unknown process %x sent message to prime_env_iter: %s
4392 (P) An error peculiar to VMS. Perl was reading values for %ENV before
4393 iterating over it, and someone else stuck a message in the stream of
4394 data Perl expected. Someone's very confused, or perhaps trying to
4395 subvert Perl's population of %ENV for nefarious purposes.
4397 =item Unknown "re" subpragma '%s' (known ones are: %s)
4399 You tried to use an unknown subpragma of the "re" pragma.
4401 =item Unknown switch condition (?(%.2s in regex; marked by <-- HERE in m/%s/
4403 (F) The condition part of a (?(condition)if-clause|else-clause) construct
4404 is not known. The condition may be lookahead or lookbehind (the condition
4405 is true if the lookahead or lookbehind is true), a (?{...}) construct (the
4406 condition is true if the code evaluates to a true value), or a number (the
4407 condition is true if the set of capturing parentheses named by the number
4410 The <-- HERE shows in the regular expression about where the problem was
4411 discovered. See L<perlre>.
4413 =item Unknown Unicode option letter '%c'
4415 You specified an unknown Unicode option. See L<perlrun> documentation
4416 of the C<-C> switch for the list of known options.
4418 =item Unknown Unicode option value %x
4420 You specified an unknown Unicode option. See L<perlrun> documentation
4421 of the C<-C> switch for the list of known options.
4423 =item Unknown warnings category '%s'
4425 (F) An error issued by the C<warnings> pragma. You specified a warnings
4426 category that is unknown to perl at this point.
4428 Note that if you want to enable a warnings category registered by a module
4429 (e.g. C<use warnings 'File::Find'>), you must have imported this module
4431 =item Unknown verb pattern '%s' in regex; marked by <-- HERE in m/%s/
4433 (F) You either made a typo or have incorrectly put a C<*> quantifier
4434 after an open brace in your pattern. Check the pattern and review
4435 L<perlre> for details on legal verb patterns.
4439 =item unmatched [ in regex; marked by <-- HERE in m/%s/
4441 (F) The brackets around a character class must match. If you wish to
4442 include a closing bracket in a character class, backslash it or put it
4443 first. The <-- HERE shows in the regular expression about where the problem
4444 was discovered. See L<perlre>.
4446 =item unmatched ( in regex; marked by <-- HERE in m/%s/
4448 (F) Unbackslashed parentheses must always be balanced in regular
4449 expressions. If you're a vi user, the % key is valuable for finding the
4450 matching parenthesis. The <-- HERE shows in the regular expression about
4451 where the problem was discovered. See L<perlre>.
4453 =item Unmatched right %s bracket
4455 (F) The lexer counted more closing curly or square brackets than opening
4456 ones, so you're probably missing a matching opening bracket. As a
4457 general rule, you'll find the missing one (so to speak) near the place
4458 you were last editing.
4460 =item Unquoted string "%s" may clash with future reserved word
4462 (W reserved) You used a bareword that might someday be claimed as a
4463 reserved word. It's best to put such a word in quotes, or capitalize it
4464 somehow, or insert an underbar into it. You might also declare it as a
4467 =item Unrecognized character %s; marked by <-- HERE after %s near column %d
4469 (F) The Perl parser has no idea what to do with the specified character
4470 in your Perl script (or eval) near the specified column. Perhaps you tried
4471 to run a compressed script, a binary program, or a directory as a Perl program.
4473 =item Unrecognized escape \\%c in character class passed through in regex; marked by <-- HERE in m/%s/
4475 (W regexp) You used a backslash-character combination which is not
4476 recognized by Perl inside character classes. The character was
4477 understood literally.
4478 The <-- HERE shows in the regular expression about where the
4479 escape was discovered.
4481 =item Unrecognized escape \\%c passed through
4483 (W misc) You used a backslash-character combination which is not
4484 recognized by Perl. The character was understood literally.
4486 =item Unrecognized escape \\%c passed through in regex; marked by <-- HERE in m/%s/
4488 (W regexp) You used a backslash-character combination which is not
4489 recognized by Perl. The character was understood literally.
4490 The <-- HERE shows in the regular expression about where the
4491 escape was discovered.
4493 =item Unrecognized signal name "%s"
4495 (F) You specified a signal name to the kill() function that was not
4496 recognized. Say C<kill -l> in your shell to see the valid signal names
4499 =item Unrecognized switch: -%s (-h will show valid options)
4501 (F) You specified an illegal option to Perl. Don't do that. (If you
4502 think you didn't do that, check the #! line to see if it's supplying the
4503 bad switch on your behalf.)
4505 =item Unsuccessful %s on filename containing newline
4507 (W newline) A file operation was attempted on a filename, and that
4508 operation failed, PROBABLY because the filename contained a newline,
4509 PROBABLY because you forgot to chomp() it off. See L<perlfunc/chomp>.
4511 =item Unsupported directory function "%s" called
4513 (F) Your machine doesn't support opendir() and readdir().
4515 =item Unsupported function %s
4517 (F) This machine doesn't implement the indicated function, apparently.
4518 At least, Configure doesn't think so.
4520 =item Unsupported function fork
4522 (F) Your version of executable does not support forking.
4524 Note that under some systems, like OS/2, there may be different flavors
4525 of Perl executables, some of which may support fork, some not. Try
4526 changing the name you call Perl by to C<perl_>, C<perl__>, and so on.
4528 =item Unsupported script encoding %s
4530 (F) Your program file begins with a Unicode Byte Order Mark (BOM) which
4531 declares it to be in a Unicode encoding that Perl cannot read.
4533 =item Unsupported socket function "%s" called
4535 (F) Your machine doesn't support the Berkeley socket mechanism, or at
4536 least that's what Configure thought.
4538 =item Unterminated attribute list
4540 (F) The lexer found something other than a simple identifier at the
4541 start of an attribute, and it wasn't a semicolon or the start of a
4542 block. Perhaps you terminated the parameter list of the previous
4543 attribute too soon. See L<attributes>.
4545 =item Unterminated attribute parameter in attribute list
4547 (F) The lexer saw an opening (left) parenthesis character while parsing
4548 an attribute list, but the matching closing (right) parenthesis
4549 character was not found. You may need to add (or remove) a backslash
4550 character to get your parentheses to balance. See L<attributes>.
4552 =item Unterminated compressed integer
4554 (F) An argument to unpack("w",...) was incompatible with the BER
4555 compressed integer format and could not be converted to an integer.
4556 See L<perlfunc/pack>.
4558 =item Unterminated verb pattern in regex; marked by <-- HERE in m/%s/
4560 (F) You used a pattern of the form C<(*VERB)> but did not terminate
4561 the pattern with a C<)>. Fix the pattern and retry.
4563 =item Unterminated verb pattern argument in regex; marked by <-- HERE in m/%s/
4565 (F) You used a pattern of the form C<(*VERB:ARG)> but did not terminate
4566 the pattern with a C<)>. Fix the pattern and retry.
4568 =item Unterminated \g{...} pattern in regex; marked by <-- HERE in m/%s/
4570 (F) You missed a close brace on a \g{..} pattern (group reference) in
4571 a regular expression. Fix the pattern and retry.
4573 =item Unterminated <> operator
4575 (F) The lexer saw a left angle bracket in a place where it was expecting
4576 a term, so it's looking for the corresponding right angle bracket, and
4577 not finding it. Chances are you left some needed parentheses out
4578 earlier in the line, and you really meant a "less than".
4580 =item untie attempted while %d inner references still exist
4582 (W untie) A copy of the object returned from C<tie> (or C<tied>) was
4583 still valid when C<untie> was called.
4585 =item Usage: POSIX::%s(%s)
4587 (F) You called a POSIX function with incorrect arguments.
4588 See L<POSIX/FUNCTIONS> for more information.
4590 =item Usage: Win32::%s(%s)
4592 (F) You called a Win32 function with incorrect arguments.
4593 See L<Win32> for more information.
4595 =item Useless (?-%s) - don't use /%s modifier in regex; marked by <-- HERE in m/%s/
4597 (W regexp) You have used an internal modifier such as (?-o) that has no
4598 meaning unless removed from the entire regexp:
4600 if ($string =~ /(?-o)$pattern/o) { ... }
4604 if ($string =~ /$pattern/) { ... }
4606 The <-- HERE shows in the regular expression about
4607 where the problem was discovered. See L<perlre>.
4609 =item Useless localization of %s
4611 (W syntax) The localization of lvalues such as C<local($x=10)> is
4612 legal, but in fact the local() currently has no effect. This may change at
4613 some point in the future, but in the meantime such code is discouraged.
4615 =item Useless (?%s) - use /%s modifier in regex; marked by <-- HERE in m/%s/
4617 (W regexp) You have used an internal modifier such as (?o) that has no
4618 meaning unless applied to the entire regexp:
4620 if ($string =~ /(?o)$pattern/) { ... }
4624 if ($string =~ /$pattern/o) { ... }
4626 The <-- HERE shows in the regular expression about
4627 where the problem was discovered. See L<perlre>.
4629 =item Useless use of /d modifier in transliteration operator
4631 (W misc) You have used the /d modifier where the searchlist has the
4632 same length as the replacelist. See L<perlop> for more information
4633 about the /d modifier.
4635 =item Useless use of %s in void context
4637 (W void) You did something without a side effect in a context that does
4638 nothing with the return value, such as a statement that doesn't return a
4639 value from a block, or the left side of a scalar comma operator. Very
4640 often this points not to stupidity on your part, but a failure of Perl
4641 to parse your program the way you thought it would. For example, you'd
4642 get this if you mixed up your C precedence with Python precedence and
4647 when you meant to say
4649 ($one, $two) = (1, 2);
4651 Another common error is to use ordinary parentheses to construct a list
4652 reference when you should be using square or curly brackets, for
4657 when you should have said
4661 The square brackets explicitly turn a list value into a scalar value,
4662 while parentheses do not. So when a parenthesized list is evaluated in
4663 a scalar context, the comma is treated like C's comma operator, which
4664 throws away the left argument, which is not what you want. See
4665 L<perlref> for more on this.
4667 This warning will not be issued for numerical constants equal to 0 or 1
4668 since they are often used in statements like
4670 1 while sub_with_side_effects();
4672 String constants that would normally evaluate to 0 or 1 are warned
4675 =item Useless use of "re" pragma
4677 (W) You did C<use re;> without any arguments. That isn't very useful.
4679 =item Useless use of sort in scalar context
4681 (W void) You used sort in scalar context, as in :
4685 This is not very useful, and perl currently optimizes this away.
4687 =item Useless use of %s with no values
4689 (W syntax) You used the push() or unshift() function with no arguments
4690 apart from the array, like C<push(@x)> or C<unshift(@foo)>. That won't
4691 usually have any effect on the array, so is completely useless. It's
4692 possible in principle that push(@tied_array) could have some effect
4693 if the array is tied to a class which implements a PUSH method. If so,
4694 you can write it as C<push(@tied_array,())> to avoid this warning.
4696 =item "use" not allowed in expression
4698 (F) The "use" keyword is recognized and executed at compile time, and
4699 returns no useful value. See L<perlmod>.
4701 =item Use of assignment to $[ is deprecated
4703 (D deprecated) The C<$[> variable (index of the first element in an array)
4704 is deprecated. See L<perlvar/"$[">.
4706 =item Use of bare << to mean <<"" is deprecated
4708 (D deprecated) You are now encouraged to use the explicitly quoted
4709 form if you wish to use an empty line as the terminator of the here-document.
4711 =item Use of comma-less variable list is deprecated
4713 (D deprecated) The values you give to a format should be
4714 separated by commas, not just aligned on a line.
4716 =item Use of chdir('') or chdir(undef) as chdir() deprecated
4718 (D deprecated) chdir() with no arguments is documented to change to
4719 $ENV{HOME} or $ENV{LOGDIR}. chdir(undef) and chdir('') share this
4720 behavior, but that has been deprecated. In future versions they
4723 Be careful to check that what you pass to chdir() is defined and not
4724 blank, else you might find yourself in your home directory.
4726 =item Use of /c modifier is meaningless in s///
4728 (W regexp) You used the /c modifier in a substitution. The /c
4729 modifier is not presently meaningful in substitutions.
4731 =item Use of /c modifier is meaningless without /g
4733 (W regexp) You used the /c modifier with a regex operand, but didn't
4734 use the /g modifier. Currently, /c is meaningful only when /g is
4735 used. (This may change in the future.)
4737 =item Use of freed value in iteration
4739 (F) Perhaps you modified the iterated array within the loop?
4740 This error is typically caused by code like the following:
4743 @a = () for (1,2,@a);
4745 You are not supposed to modify arrays while they are being iterated over.
4746 For speed and efficiency reasons, Perl internally does not do full
4747 reference-counting of iterated items, hence deleting such an item in the
4748 middle of an iteration causes Perl to see a freed value.
4750 =item Use of *glob{FILEHANDLE} is deprecated
4752 (D deprecated) You are now encouraged to use the shorter *glob{IO} form
4753 to access the filehandle slot within a typeglob.
4755 =item Use of /g modifier is meaningless in split
4757 (W regexp) You used the /g modifier on the pattern for a C<split>
4758 operator. Since C<split> always tries to match the pattern
4759 repeatedly, the C</g> has no effect.
4761 =item Use of inherited AUTOLOAD for non-method %s() is deprecated
4763 (D deprecated) As an (ahem) accidental feature, C<AUTOLOAD> subroutines
4764 are looked up as methods (using the C<@ISA> hierarchy) even when the
4765 subroutines to be autoloaded were called as plain functions (e.g.
4766 C<Foo::bar()>), not as methods (e.g. C<< Foo->bar() >> or C<<
4769 This bug will be rectified in future by using method lookup only for
4770 methods' C<AUTOLOAD>s. However, there is a significant base of existing
4771 code that may be using the old behavior. So, as an interim step, Perl
4772 currently issues an optional warning when non-methods use inherited
4775 The simple rule is: Inheritance will not work when autoloading
4776 non-methods. The simple fix for old code is: In any module that used
4777 to depend on inheriting C<AUTOLOAD> for non-methods from a base class
4778 named C<BaseClass>, execute C<*AUTOLOAD = \&BaseClass::AUTOLOAD> during
4781 In code that currently says C<use AutoLoader; @ISA = qw(AutoLoader);>
4782 you should remove AutoLoader from @ISA and change C<use AutoLoader;> to
4783 C<use AutoLoader 'AUTOLOAD';>.
4785 =item Use of octal value above 377 is deprecated
4787 (D deprecated, W regexp) There is a constant in the regular expression whose
4788 value is interpeted by Perl as octal and larger than 377 (255 decimal, 0xFF
4789 hex). Perl may take this to mean different things depending on the rest of
4790 the regular expression. If you meant such an octal value, convert it to
4791 hexadecimal and use C<\xHH> or C<\x{HH}> instead. If you meant to have
4792 part of it mean a backreference, use C<\g> for that. See L<perlre>.
4794 =item Use of %s in printf format not supported
4796 (F) You attempted to use a feature of printf that is accessible from
4797 only C. This usually means there's a better way to do it in Perl.
4799 =item Use of %s is deprecated
4801 (D deprecated) The construct indicated is no longer recommended for use,
4802 generally because there's a better way to do it, and also because the
4803 old way has bad side effects.
4805 =item Use of -l on filehandle %s
4807 (W io) A filehandle represents an opened file, and when you opened the file
4808 it already went past any symlink you are presumably trying to look for.
4809 The operation returned C<undef>. Use a filename instead.
4811 =item Use of "package" with no arguments is deprecated
4813 (D deprecated) You used the C<package> keyword without specifying a package
4814 name. So no namespace is current at all. Using this can cause many
4815 otherwise reasonable constructs to fail in baffling ways. C<use strict;>
4818 =item Use of reference "%s" as array index
4820 (W misc) You tried to use a reference as an array index; this probably
4821 isn't what you mean, because references in numerical context tend
4822 to be huge numbers, and so usually indicates programmer error.
4824 If you really do mean it, explicitly numify your reference, like so:
4825 C<$array[0+$ref]>. This warning is not given for overloaded objects,
4826 either, because you can overload the numification and stringification
4827 operators and then you assumably know what you are doing.
4829 =item Use of reserved word "%s" is deprecated
4831 (D deprecated) The indicated bareword is a reserved word. Future
4832 versions of perl may use it as a keyword, so you're better off either
4833 explicitly quoting the word in a manner appropriate for its context of
4834 use, or using a different name altogether. The warning can be
4835 suppressed for subroutine names by either adding a C<&> prefix, or using
4836 a package qualifier, e.g. C<&our()>, or C<Foo::our()>.
4838 =item Use of tainted arguments in %s is deprecated
4840 (W taint, deprecated) You have supplied C<system()> or C<exec()> with multiple
4841 arguments and at least one of them is tainted. This used to be allowed
4842 but will become a fatal error in a future version of perl. Untaint your
4843 arguments. See L<perlsec>.
4845 =item Use of uninitialized value%s
4847 (W uninitialized) An undefined value was used as if it were already
4848 defined. It was interpreted as a "" or a 0, but maybe it was a mistake.
4849 To suppress this warning assign a defined value to your variables.
4851 To help you figure out what was undefined, perl will try to tell you the
4852 name of the variable (if any) that was undefined. In some cases it cannot
4853 do this, so it also tells you what operation you used the undefined value
4854 in. Note, however, that perl optimizes your program and the operation
4855 displayed in the warning may not necessarily appear literally in your
4856 program. For example, C<"that $foo"> is usually optimized into C<"that "
4857 . $foo>, and the warning will refer to the C<concatenation (.)> operator,
4858 even though there is no C<.> in your program.
4860 =item Using a hash as a reference is deprecated
4862 (D deprecated) You tried to use a hash as a reference, as in
4863 C<< %foo->{"bar"} >> or C<< %$ref->{"hello"} >>. Versions of perl <= 5.6.1
4864 used to allow this syntax, but shouldn't have. It is now deprecated, and will
4865 be removed in a future version.
4867 =item Using an array as a reference is deprecated
4869 (D deprecated) You tried to use an array as a reference, as in
4870 C<< @foo->[23] >> or C<< @$ref->[99] >>. Versions of perl <= 5.6.1 used to
4871 allow this syntax, but shouldn't have. It is now deprecated, and will be
4872 removed in a future version.
4874 =item UTF-16 surrogate %s
4876 (W utf8) You tried to generate half of an UTF-16 surrogate by
4877 requesting a Unicode character between the code points 0xD800 and
4878 0xDFFF (inclusive). That range is reserved exclusively for the use of
4879 UTF-16 encoding (by having two 16-bit UCS-2 characters); but Perl
4880 encodes its characters in UTF-8, so what you got is a very illegal
4881 character. If you really know what you are doing you can turn off
4882 this warning by C<no warnings 'utf8';>.
4884 =item Value of %s can be "0"; test with defined()
4886 (W misc) In a conditional expression, you used <HANDLE>, <*> (glob),
4887 C<each()>, or C<readdir()> as a boolean value. Each of these constructs
4888 can return a value of "0"; that would make the conditional expression
4889 false, which is probably not what you intended. When using these
4890 constructs in conditional expressions, test their values with the
4891 C<defined> operator.
4893 =item Value of CLI symbol "%s" too long
4895 (W misc) A warning peculiar to VMS. Perl tried to read the value of an
4896 %ENV element from a CLI symbol table, and found a resultant string
4897 longer than 1024 characters. The return value has been truncated to
4900 =item Variable "%s" is not available
4902 (W closure) During compilation, an inner named subroutine or eval is
4903 attempting to capture an outer lexical that is not currently available.
4904 This can happen for one of two reasons. First, the outer lexical may be
4905 declared in an outer anonymous subroutine that has not yet been created.
4906 (Remember that named subs are created at compile time, while anonymous
4907 subs are created at run-time.) For example,
4909 sub { my $a; sub f { $a } }
4911 At the time that f is created, it can't capture the current value of $a,
4912 since the anonymous subroutine hasn't been created yet. Conversely,
4913 the following won't give a warning since the anonymous subroutine has by
4914 now been created and is live:
4916 sub { my $a; eval 'sub f { $a }' }->();
4918 The second situation is caused by an eval accessing a variable that has
4919 gone out of scope, for example,
4927 Here, when the '$a' in the eval is being compiled, f() is not currently being
4928 executed, so its $a is not available for capture.
4930 =item Variable "%s" is not imported%s
4932 (F) While "use strict" in effect, you referred to a global variable that
4933 you apparently thought was imported from another module, because
4934 something else of the same name (usually a subroutine) is exported by
4935 that module. It usually means you put the wrong funny character on the
4936 front of your variable.
4938 =item Variable length lookbehind not implemented in m/%s/
4940 (F) Lookbehind is allowed only for subexpressions whose length is fixed and
4941 known at compile time. See L<perlre>.
4943 =item "%s" variable %s masks earlier declaration in same %s
4945 (W misc) A "my", "our" or "state" variable has been redeclared in the current
4946 scope or statement, effectively eliminating all access to the previous
4947 instance. This is almost always a typographical error. Note that the
4948 earlier variable will still exist until the end of the scope or until
4949 all closure referents to it are destroyed.
4951 =item Variable syntax
4953 (A) You've accidentally run your script through B<csh> instead
4954 of Perl. Check the #! line, or manually feed your script into
4957 =item Variable "%s" will not stay shared
4959 (W closure) An inner (nested) I<named> subroutine is referencing a
4960 lexical variable defined in an outer named subroutine.
4962 When the inner subroutine is called, it will see the value of
4963 the outer subroutine's variable as it was before and during the *first*
4964 call to the outer subroutine; in this case, after the first call to the
4965 outer subroutine is complete, the inner and outer subroutines will no
4966 longer share a common value for the variable. In other words, the
4967 variable will no longer be shared.
4969 This problem can usually be solved by making the inner subroutine
4970 anonymous, using the C<sub {}> syntax. When inner anonymous subs that
4971 reference variables in outer subroutines are created, they
4972 are automatically rebound to the current values of such variables.
4974 =item Verb pattern '%s' has a mandatory argument in regex; marked by <-- HERE in m/%s/
4976 (F) You used a verb pattern that requires an argument. Supply an argument
4977 or check that you are using the right verb.
4979 =item Verb pattern '%s' may not have an argument in regex; marked by <-- HERE in m/%s/
4981 (F) You used a verb pattern that is not allowed an argument. Remove the
4982 argument or check that you are using the right verb.
4984 =item Version number must be a constant number
4986 (P) The attempt to translate a C<use Module n.n LIST> statement into
4987 its equivalent C<BEGIN> block found an internal inconsistency with
4990 =item Version string '%s' contains invalid data; ignoring: '%s'
4992 (W misc) The version string contains invalid characters at the end, which
4995 =item Warning: something's wrong
4997 (W) You passed warn() an empty string (the equivalent of C<warn "">) or
4998 you called it with no args and C<$@> was empty.
5000 =item Warning: unable to close filehandle %s properly
5002 (S) The implicit close() done by an open() got an error indication on
5003 the close(). This usually indicates your file system ran out of disk
5006 =item Warning: Use of "%s" without parentheses is ambiguous
5008 (S ambiguous) You wrote a unary operator followed by something that
5009 looks like a binary operator that could also have been interpreted as a
5010 term or unary operator. For instance, if you know that the rand
5011 function has a default argument of 1.0, and you write
5015 you may THINK you wrote the same thing as
5019 but in actual fact, you got
5023 So put in parentheses to say what you really mean.
5025 =item Wide character in %s
5027 (S utf8) Perl met a wide character (>255) when it wasn't expecting
5028 one. This warning is by default on for I/O (like print). The easiest
5029 way to quiet this warning is simply to add the C<:utf8> layer to the
5030 output, e.g. C<binmode STDOUT, ':utf8'>. Another way to turn off the
5031 warning is to add C<no warnings 'utf8';> but that is often closer to
5032 cheating. In general, you are supposed to explicitly mark the
5033 filehandle with an encoding, see L<open> and L<perlfunc/binmode>.
5035 =item Within []-length '%c' not allowed
5037 (F) The count in the (un)pack template may be replaced by C<[TEMPLATE]> only if
5038 C<TEMPLATE> always matches the same amount of packed bytes that can be
5039 determined from the template alone. This is not possible if it contains an
5040 of the codes @, /, U, u, w or a *-length. Redesign the template.
5042 =item write() on closed filehandle %s
5044 (W closed) The filehandle you're writing to got itself closed sometime
5045 before now. Check your control flow.
5047 =item %s "\x%s" does not map to Unicode
5049 When reading in different encodings Perl tries to map everything
5050 into Unicode characters. The bytes you read in are not legal in
5051 this encoding, for example
5053 utf8 "\xE4" does not map to Unicode
5055 if you try to read in the a-diaereses Latin-1 as UTF-8.
5057 =item 'X' outside of string
5059 (F) You had a (un)pack template that specified a relative position before
5060 the beginning of the string being (un)packed. See L<perlfunc/pack>.
5062 =item 'x' outside of string in unpack
5064 (F) You had a pack template that specified a relative position after
5065 the end of the string being unpacked. See L<perlfunc/pack>.
5067 =item YOU HAVEN'T DISABLED SET-ID SCRIPTS IN THE KERNEL YET!
5069 (F) And you probably never will, because you probably don't have the
5070 sources to your kernel, and your vendor probably doesn't give a rip
5071 about what you want. Your best bet is to put a setuid C wrapper around
5074 =item You need to quote "%s"
5076 (W syntax) You assigned a bareword as a signal handler name.
5077 Unfortunately, you already have a subroutine of that name declared,
5078 which means that Perl 5 will try to call the subroutine when the
5079 assignment is executed, which is probably not what you want. (If it IS
5080 what you want, put an & in front.)
5082 =item Your random numbers are not that random
5084 (F) When trying to initialise the random seed for hashes, Perl could
5085 not get any randomness out of your system. This usually indicates
5086 Something Very Wrong.
5092 L<warnings>, L<perllexwarn>.