3 perldiag - various Perl diagnostics
7 These messages are classified as follows (listed in increasing order of
10 (W) A warning (optional).
11 (D) A deprecation (optional).
12 (S) A severe warning (default).
13 (F) A fatal error (trappable).
14 (P) An internal error you should never see (trappable).
15 (X) A very fatal error (nontrappable).
16 (A) An alien error message (not generated by Perl).
18 The majority of messages from the first three classifications above
19 (W, D & S) can be controlled using the C<warnings> pragma.
21 If a message can be controlled by the C<warnings> pragma, its warning
22 category is included with the classification letter in the description
25 Optional warnings are enabled by using the C<warnings> pragma or the B<-w>
26 and B<-W> switches. Warnings may be captured by setting C<$SIG{__WARN__}>
27 to a reference to a routine that will be called on each warning instead
28 of printing it. See L<perlvar>.
30 Default warnings are always enabled unless they are explicitly disabled
31 with the C<warnings> pragma or the B<-X> switch.
33 Trappable errors may be trapped using the eval operator. See
34 L<perlfunc/eval>. In almost all cases, warnings may be selectively
35 disabled or promoted to fatal errors using the C<warnings> pragma.
38 The messages are in alphabetical order, without regard to upper or
39 lower-case. Some of these messages are generic. Spots that vary are
40 denoted with a %s or other printf-style escape. These escapes are
41 ignored by the alphabetical order, as are all characters other than
42 letters. To look up your message, just ignore anything that is not a
47 =item accept() on closed socket %s
49 (W closed) You tried to do an accept on a closed socket. Did you forget
50 to check the return value of your socket() call? See
53 =item Allocation too large: %lx
55 (X) You can't allocate more than 64K on an MS-DOS machine.
57 =item '%c' allowed only after types %s
59 (F) The modifiers '!', '<' and '>' are allowed in pack() or unpack() only
60 after certain types. See L<perlfunc/pack>.
62 =item Ambiguous call resolved as CORE::%s(), qualify as such or use &
64 (W ambiguous) A subroutine you have declared has the same name as a Perl
65 keyword, and you have used the name without qualification for calling
66 one or the other. Perl decided to call the builtin because the
67 subroutine is not imported.
69 To force interpretation as a subroutine call, either put an ampersand
70 before the subroutine name, or qualify the name with its package.
71 Alternatively, you can import the subroutine (or pretend that it's
72 imported with the C<use subs> pragma).
74 To silently interpret it as the Perl operator, use the C<CORE::> prefix
75 on the operator (e.g. C<CORE::log($x)>) or declare the subroutine
76 to be an object method (see L<perlsub/"Subroutine Attributes"> or
79 =item Ambiguous range in transliteration operator
81 (F) You wrote something like C<tr/a-z-0//> which doesn't mean anything at
82 all. To include a C<-> character in a transliteration, put it either
83 first or last. (In the past, C<tr/a-z-0//> was synonymous with
84 C<tr/a-y//>, which was probably not what you would have expected.)
86 =item Ambiguous use of %s resolved as %s
88 (W ambiguous)(S) You said something that may not be interpreted the way
89 you thought. Normally it's pretty easy to disambiguate it by supplying
90 a missing quote, operator, parenthesis pair or declaration.
92 =item '|' and '<' may not both be specified on command line
94 (F) An error peculiar to VMS. Perl does its own command line
95 redirection, and found that STDIN was a pipe, and that you also tried to
96 redirect STDIN using '<'. Only one STDIN stream to a customer, please.
98 =item '|' and '>' may not both be specified on command line
100 (F) An error peculiar to VMS. Perl does its own command line
101 redirection, and thinks you tried to redirect stdout both to a file and
102 into a pipe to another command. You need to choose one or the other,
103 though nothing's stopping you from piping into a program or Perl script
104 which 'splits' output into two streams, such as
106 open(OUT,">$ARGV[0]") or die "Can't write to $ARGV[0]: $!";
113 =item Applying %s to %s will act on scalar(%s)
115 (W misc) The pattern match (C<//>), substitution (C<s///>), and
116 transliteration (C<tr///>) operators work on scalar values. If you apply
117 one of them to an array or a hash, it will convert the array or hash to
118 a scalar value -- the length of an array, or the population info of a
119 hash -- and then work on that scalar value. This is probably not what
120 you meant to do. See L<perlfunc/grep> and L<perlfunc/map> for
123 =item Args must match #! line
125 (F) The setuid emulator requires that the arguments Perl was invoked
126 with match the arguments specified on the #! line. Since some systems
127 impose a one-argument limit on the #! line, try combining switches;
128 for example, turn C<-w -U> into C<-wU>.
130 =item Arg too short for msgsnd
132 (F) msgsnd() requires a string at least as long as sizeof(long).
134 =item %s argument is not a HASH or ARRAY element
136 (F) The argument to exists() must be a hash or array element, such as:
141 =item %s argument is not a HASH or ARRAY element or slice
143 (F) The argument to delete() must be either a hash or array element,
149 or a hash or array slice, such as:
151 @foo[$bar, $baz, $xyzzy]
152 @{$ref->[12]}{"susie", "queue"}
154 =item %s argument is not a subroutine name
156 (F) The argument to exists() for C<exists &sub> must be a subroutine
157 name, and not a subroutine call. C<exists &sub()> will generate this
160 =item Argument "%s" isn't numeric%s
162 (W numeric) The indicated string was fed as an argument to an operator
163 that expected a numeric value instead. If you're fortunate the message
164 will identify which operator was so unfortunate.
166 =item Argument list not closed for PerlIO layer "%s"
168 (W layer) When pushing a layer with arguments onto the Perl I/O system you
169 forgot the ) that closes the argument list. (Layers take care of transforming
170 data between external and internal representations.) Perl stopped parsing
171 the layer list at this point and did not attempt to push this layer.
172 If your program didn't explicitly request the failing operation, it may be
173 the result of the value of the environment variable PERLIO.
175 =item Array @%s missing the @ in argument %d of %s()
177 (D deprecated) Really old Perl let you omit the @ on array names in some
178 spots. This is now heavily deprecated.
180 =item assertion botched: %s
182 (P) The malloc package that comes with Perl had an internal failure.
184 =item Assertion failed: file "%s"
186 (P) A general assertion failed. The file in question must be examined.
188 =item Assignment to both a list and a scalar
190 (F) If you assign to a conditional operator, the 2nd and 3rd arguments
191 must either both be scalars or both be lists. Otherwise Perl won't
192 know which context to supply to the right side.
194 =item A thread exited while %d threads were running
196 (W) When using threaded Perl, a thread (not necessarily the main
197 thread) exited while there were still other threads running.
198 Usually it's a good idea to first collect the return values of the
199 created threads by joining them, and only then exit from the main
200 thread. See L<threads>.
202 =item Attempt to access disallowed key '%s' in a restricted hash
204 (F) The failing code has attempted to get or set a key which is not in
205 the current set of allowed keys of a restricted hash.
207 =item Attempt to bless into a reference
209 (F) The CLASSNAME argument to the bless() operator is expected to be
210 the name of the package to bless the resulting object into. You've
211 supplied instead a reference to something: perhaps you wrote
217 bless $self, ref($proto) || $proto;
219 If you actually want to bless into the stringified version
220 of the reference supplied, you need to stringify it yourself, for
223 bless $self, "$proto";
225 =item Attempt to delete disallowed key '%s' from a restricted hash
227 (F) The failing code attempted to delete from a restricted hash a key
228 which is not in its key set.
230 =item Attempt to delete readonly key '%s' from a restricted hash
232 (F) The failing code attempted to delete a key whose value has been
233 declared readonly from a restricted hash.
235 =item Attempt to free non-arena SV: 0x%lx
237 (P internal) All SV objects are supposed to be allocated from arenas
238 that will be garbage collected on exit. An SV was discovered to be
239 outside any of those arenas.
241 =item Attempt to free nonexistent shared string
243 (P internal) Perl maintains a reference counted internal table of
244 strings to optimize the storage and access of hash keys and other
245 strings. This indicates someone tried to decrement the reference count
246 of a string that can no longer be found in the table.
248 =item Attempt to free temp prematurely
250 (W debugging) Mortalized values are supposed to be freed by the
251 free_tmps() routine. This indicates that something else is freeing the
252 SV before the free_tmps() routine gets a chance, which means that the
253 free_tmps() routine will be freeing an unreferenced scalar when it does
256 =item Attempt to free unreferenced glob pointers
258 (P internal) The reference counts got screwed up on symbol aliases.
260 =item Attempt to free unreferenced scalar
262 (W internal) Perl went to decrement the reference count of a scalar to
263 see if it would go to 0, and discovered that it had already gone to 0
264 earlier, and should have been freed, and in fact, probably was freed.
265 This could indicate that SvREFCNT_dec() was called too many times, or
266 that SvREFCNT_inc() was called too few times, or that the SV was
267 mortalized when it shouldn't have been, or that memory has been
270 =item Attempt to join self
272 (F) You tried to join a thread from within itself, which is an
273 impossible task. You may be joining the wrong thread, or you may need
274 to move the join() to some other thread.
276 =item Attempt to pack pointer to temporary value
278 (W pack) You tried to pass a temporary value (like the result of a
279 function, or a computed expression) to the "p" pack() template. This
280 means the result contains a pointer to a location that could become
281 invalid anytime, even before the end of the current statement. Use
282 literals or global values as arguments to the "p" pack() template to
285 =item Attempt to use reference as lvalue in substr
287 (W substr) You supplied a reference as the first argument to substr()
288 used as an lvalue, which is pretty strange. Perhaps you forgot to
289 dereference it first. See L<perlfunc/substr>.
291 =item Bad arg length for %s, is %d, should be %s
293 (F) You passed a buffer of the wrong size to one of msgctl(), semctl()
294 or shmctl(). In C parlance, the correct sizes are, respectively,
295 S<sizeof(struct msqid_ds *)>, S<sizeof(struct semid_ds *)>, and
296 S<sizeof(struct shmid_ds *)>.
298 =item Bad evalled substitution pattern
300 (F) You've used the C</e> switch to evaluate the replacement for a
301 substitution, but perl found a syntax error in the code to evaluate,
302 most likely an unexpected right brace '}'.
304 =item Bad filehandle: %s
306 (F) A symbol was passed to something wanting a filehandle, but the
307 symbol has no filehandle associated with it. Perhaps you didn't do an
308 open(), or did it in another package.
310 =item Bad free() ignored
312 (S malloc) An internal routine called free() on something that had never
313 been malloc()ed in the first place. Mandatory, but can be disabled by
314 setting environment variable C<PERL_BADFREE> to 0.
316 This message can be seen quite often with DB_File on systems with "hard"
317 dynamic linking, like C<AIX> and C<OS/2>. It is a bug of C<Berkeley DB>
318 which is left unnoticed if C<DB> uses I<forgiving> system malloc().
322 (P) One of the internal hash routines was passed a null HV pointer.
324 =item Badly placed ()'s
326 (A) You've accidentally run your script through B<csh> instead
327 of Perl. Check the #! line, or manually feed your script into
330 =item Bad name after %s::
332 (F) You started to name a symbol by using a package prefix, and then
333 didn't finish the symbol. In particular, you can't interpolate outside
342 $sym = "mypack::$var";
344 =item Bad realloc() ignored
346 (S malloc) An internal routine called realloc() on something that had
347 never been malloc()ed in the first place. Mandatory, but can be disabled
348 by setting environment variable C<PERL_BADFREE> to 1.
350 =item Bad symbol for array
352 (P) An internal request asked to add an array entry to something that
353 wasn't a symbol table entry.
355 =item Bad symbol for filehandle
357 (P) An internal request asked to add a filehandle entry to something
358 that wasn't a symbol table entry.
360 =item Bad symbol for hash
362 (P) An internal request asked to add a hash entry to something that
363 wasn't a symbol table entry.
365 =item Bareword found in conditional
367 (W bareword) The compiler found a bareword where it expected a
368 conditional, which often indicates that an || or && was parsed as part
369 of the last argument of the previous construct, for example:
373 It may also indicate a misspelled constant that has been interpreted as
376 use constant TYPO => 1;
377 if (TYOP) { print "foo" }
379 The C<strict> pragma is useful in avoiding such errors.
381 =item Bareword "%s" not allowed while "strict subs" in use
383 (F) With "strict subs" in use, a bareword is only allowed as a
384 subroutine identifier, in curly brackets or to the left of the "=>"
385 symbol. Perhaps you need to predeclare a subroutine?
387 =item Bareword "%s" refers to nonexistent package
389 (W bareword) You used a qualified bareword of the form C<Foo::>, but the
390 compiler saw no other uses of that namespace before that point. Perhaps
391 you need to predeclare a package?
393 =item BEGIN failed--compilation aborted
395 (F) An untrapped exception was raised while executing a BEGIN
396 subroutine. Compilation stops immediately and the interpreter is
399 =item BEGIN not safe after errors--compilation aborted
401 (F) Perl found a C<BEGIN {}> subroutine (or a C<use> directive, which
402 implies a C<BEGIN {}>) after one or more compilation errors had already
403 occurred. Since the intended environment for the C<BEGIN {}> could not
404 be guaranteed (due to the errors), and since subsequent code likely
405 depends on its correct operation, Perl just gave up.
407 =item \1 better written as $1
409 (W syntax) Outside of patterns, backreferences live on as variables.
410 The use of backslashes is grandfathered on the right-hand side of a
411 substitution, but stylistically it's better to use the variable form
412 because other Perl programmers will expect it, and it works better if
413 there are more than 9 backreferences.
415 =item Binary number > 0b11111111111111111111111111111111 non-portable
417 (W portable) The binary number you specified is larger than 2**32-1
418 (4294967295) and therefore non-portable between systems. See
419 L<perlport> for more on portability concerns.
421 =item bind() on closed socket %s
423 (W closed) You tried to do a bind on a closed socket. Did you forget to
424 check the return value of your socket() call? See L<perlfunc/bind>.
426 =item binmode() on closed filehandle %s
428 (W unopened) You tried binmode() on a filehandle that was never opened.
429 Check you control flow and number of arguments.
431 =item Bit vector size > 32 non-portable
433 (W portable) Using bit vector sizes larger than 32 is non-portable.
435 =item Bizarre copy of %s in %s
437 (P) Perl detected an attempt to copy an internal value that is not
440 =item Buffer overflow in prime_env_iter: %s
442 (W internal) A warning peculiar to VMS. While Perl was preparing to
443 iterate over %ENV, it encountered a logical name or symbol definition
444 which was too long, so it was truncated to the string shown.
446 =item Callback called exit
448 (F) A subroutine invoked from an external package via call_sv()
449 exited by calling exit.
451 =item %s() called too early to check prototype
453 (W prototype) You've called a function that has a prototype before the
454 parser saw a definition or declaration for it, and Perl could not check
455 that the call conforms to the prototype. You need to either add an
456 early prototype declaration for the subroutine in question, or move the
457 subroutine definition ahead of the call to get proper prototype
458 checking. Alternatively, if you are certain that you're calling the
459 function correctly, you may put an ampersand before the name to avoid
460 the warning. See L<perlsub>.
462 =item Cannot compress integer in pack
464 (F) An argument to pack("w",...) was too large to compress. The BER
465 compressed integer format can only be used with positive integers, and you
466 attempted to compress Infinity or a very large number (> 1e308).
467 See L<perlfunc/pack>.
469 =item Cannot compress negative numbers in pack
471 (F) An argument to pack("w",...) was negative. The BER compressed integer
472 format can only be used with positive integers. See L<perlfunc/pack>.
474 =item Can only compress unsigned integers in pack
476 (F) An argument to pack("w",...) was not an integer. The BER compressed
477 integer format can only be used with positive integers, and you attempted
478 to compress something else. See L<perlfunc/pack>.
480 =item Can't bless non-reference value
482 (F) Only hard references may be blessed. This is how Perl "enforces"
483 encapsulation of objects. See L<perlobj>.
485 =item Can't call method "%s" in empty package "%s"
487 (F) You called a method correctly, and it correctly indicated a package
488 functioning as a class, but that package doesn't have ANYTHING defined
489 in it, let alone methods. See L<perlobj>.
491 =item Can't call method "%s" on an undefined value
493 (F) You used the syntax of a method call, but the slot filled by the
494 object reference or package name contains an undefined value. Something
495 like this will reproduce the error:
498 process $BADREF 1,2,3;
499 $BADREF->process(1,2,3);
501 =item Can't call method "%s" on unblessed reference
503 (F) A method call must know in what package it's supposed to run. It
504 ordinarily finds this out from the object reference you supply, but you
505 didn't supply an object reference in this case. A reference isn't an
506 object reference until it has been blessed. See L<perlobj>.
508 =item Can't call method "%s" without a package or object reference
510 (F) You used the syntax of a method call, but the slot filled by the
511 object reference or package name contains an expression that returns a
512 defined value which is neither an object reference nor a package name.
513 Something like this will reproduce the error:
516 process $BADREF 1,2,3;
517 $BADREF->process(1,2,3);
519 =item Can't chdir to %s
521 (F) You called C<perl -x/foo/bar>, but C</foo/bar> is not a directory
522 that you can chdir to, possibly because it doesn't exist.
524 =item Can't check filesystem of script "%s" for nosuid
526 (P) For some reason you can't check the filesystem of the script for
529 =item Can't coerce array into hash
531 (F) You used an array where a hash was expected, but the array has no
532 information on how to map from keys to array indices. You can do that
533 only with arrays that have a hash reference at index 0.
535 =item Can't coerce %s to integer in %s
537 (F) Certain types of SVs, in particular real symbol table entries
538 (typeglobs), can't be forced to stop being what they are. So you can't
548 but then $foo no longer contains a glob.
550 =item Can't coerce %s to number in %s
552 (F) Certain types of SVs, in particular real symbol table entries
553 (typeglobs), can't be forced to stop being what they are.
555 =item Can't coerce %s to string in %s
557 (F) Certain types of SVs, in particular real symbol table entries
558 (typeglobs), can't be forced to stop being what they are.
560 =item Can't create pipe mailbox
562 (P) An error peculiar to VMS. The process is suffering from exhausted
563 quotas or other plumbing problems.
565 =item Can't declare class for non-scalar %s in "%s"
567 (F) Currently, only scalar variables can be declared with a specific
568 class qualifier in a "my" or "our" declaration. The semantics may be
569 extended for other types of variables in future.
571 =item Can't declare %s in "%s"
573 (F) Only scalar, array, and hash variables may be declared as "my" or
574 "our" variables. They must have ordinary identifiers as names.
576 =item Can't do inplace edit: %s is not a regular file
578 (S inplace) You tried to use the B<-i> switch on a special file, such as
579 a file in /dev, or a FIFO. The file was ignored.
581 =item Can't do inplace edit on %s: %s
583 (S inplace) The creation of the new file failed for the indicated
586 =item Can't do inplace edit without backup
588 (F) You're on a system such as MS-DOS that gets confused if you try
589 reading from a deleted (but still opened) file. You have to say
590 C<-i.bak>, or some such.
592 =item Can't do inplace edit: %s would not be unique
594 (S inplace) Your filesystem does not support filenames longer than 14
595 characters and Perl was unable to create a unique filename during
596 inplace editing with the B<-i> switch. The file was ignored.
598 =item Can't do {n,m} with n > m in regex; marked by <-- HERE in m/%s/
600 (F) Minima must be less than or equal to maxima. If you really want your
601 regexp to match something 0 times, just put {0}. The <-- HERE shows in the
602 regular expression about where the problem was discovered. See L<perlre>.
604 =item Can't do setegid!
606 (P) The setegid() call failed for some reason in the setuid emulator of
609 =item Can't do seteuid!
611 (P) The setuid emulator of suidperl failed for some reason.
613 =item Can't do setuid
615 (F) This typically means that ordinary perl tried to exec suidperl to do
616 setuid emulation, but couldn't exec it. It looks for a name of the form
617 sperl5.000 in the same directory that the perl executable resides under
618 the name perl5.000, typically /usr/local/bin on Unix machines. If the
619 file is there, check the execute permissions. If it isn't, ask your
620 sysadmin why he and/or she removed it.
622 =item Can't do waitpid with flags
624 (F) This machine doesn't have either waitpid() or wait4(), so only
625 waitpid() without flags is emulated.
627 =item Can't emulate -%s on #! line
629 (F) The #! line specifies a switch that doesn't make sense at this
630 point. For example, it'd be kind of silly to put a B<-x> on the #!
633 =item Can't %s %s-endian %ss on this platform
635 (F) Your platform's byte-order is neither big-endian nor little-endian,
636 or it has a very strange pointer size. Packing and unpacking big- or
637 little-endian floating point values and pointers may not be possible.
638 See L<perlfunc/pack>.
640 =item Can't exec "%s": %s
642 (W exec) A system(), exec(), or piped open call could not execute the
643 named program for the indicated reason. Typical reasons include: the
644 permissions were wrong on the file, the file wasn't found in
645 C<$ENV{PATH}>, the executable in question was compiled for another
646 architecture, or the #! line in a script points to an interpreter that
647 can't be run for similar reasons. (Or maybe your system doesn't support
652 (F) Perl was trying to execute the indicated program for you because
653 that's what the #! line said. If that's not what you wanted, you may
654 need to mention "perl" on the #! line somewhere.
656 =item Can't execute %s
658 (F) You used the B<-S> switch, but the copies of the script to execute
659 found in the PATH did not have correct permissions.
661 =item Can't find an opnumber for "%s"
663 (F) A string of a form C<CORE::word> was given to prototype(), but there
664 is no builtin with the name C<word>.
666 =item Can't find %s character property "%s"
668 (F) You used C<\p{}> or C<\P{}> but the character property by that name
669 could not be found. Maybe you misspelled the name of the property
670 (remember that the names of character properties consist only of
671 alphanumeric characters), or maybe you forgot the C<Is> or C<In> prefix?
673 =item Can't find label %s
675 (F) You said to goto a label that isn't mentioned anywhere that it's
676 possible for us to go to. See L<perlfunc/goto>.
678 =item Can't find %s on PATH
680 (F) You used the B<-S> switch, but the script to execute could not be
683 =item Can't find %s on PATH, '.' not in PATH
685 (F) You used the B<-S> switch, but the script to execute could not be
686 found in the PATH, or at least not with the correct permissions. The
687 script exists in the current directory, but PATH prohibits running it.
689 =item Can't find %s property definition %s
691 (F) You may have tried to use C<\p> which means a Unicode property (for
692 example C<\p{Lu}> is all uppercase letters). If you did mean to use a
693 Unicode property, see L<perlunicode> for the list of known properties.
694 If you didn't mean to use a Unicode property, escape the C<\p>, either
695 by C<\\p> (just the C<\p>) or by C<\Q\p> (the rest of the string, until
698 =item Can't find string terminator %s anywhere before EOF
700 (F) Perl strings can stretch over multiple lines. This message means
701 that the closing delimiter was omitted. Because bracketed quotes count
702 nesting levels, the following is missing its final parenthesis:
704 print q(The character '(' starts a side comment.);
706 If you're getting this error from a here-document, you may have included
707 unseen whitespace before or after your closing tag. A good programmer's
708 editor will have a way to help you find these characters.
712 (F) A fatal error occurred while trying to fork while opening a
715 =item Can't get filespec - stale stat buffer?
717 (S) A warning peculiar to VMS. This arises because of the difference
718 between access checks under VMS and under the Unix model Perl assumes.
719 Under VMS, access checks are done by filename, rather than by bits in
720 the stat buffer, so that ACLs and other protections can be taken into
721 account. Unfortunately, Perl assumes that the stat buffer contains all
722 the necessary information, and passes it, instead of the filespec, to
723 the access checking routine. It will try to retrieve the filespec using
724 the device name and FID present in the stat buffer, but this works only
725 if you haven't made a subsequent call to the CRTL stat() routine,
726 because the device name is overwritten with each call. If this warning
727 appears, the name lookup failed, and the access checking routine gave up
728 and returned FALSE, just to be conservative. (Note: The access checking
729 routine knows about the Perl C<stat> operator and file tests, so you
730 shouldn't ever see this warning in response to a Perl command; it arises
731 only if some internal code takes stat buffers lightly.)
733 =item Can't get pipe mailbox device name
735 (P) An error peculiar to VMS. After creating a mailbox to act as a
736 pipe, Perl can't retrieve its name for later use.
738 =item Can't get SYSGEN parameter value for MAXBUF
740 (P) An error peculiar to VMS. Perl asked $GETSYI how big you want your
741 mailbox buffers to be, and didn't get an answer.
743 =item Can't "goto" into the middle of a foreach loop
745 (F) A "goto" statement was executed to jump into the middle of a foreach
746 loop. You can't get there from here. See L<perlfunc/goto>.
748 =item Can't "goto" out of a pseudo block
750 (F) A "goto" statement was executed to jump out of what might look like
751 a block, except that it isn't a proper block. This usually occurs if
752 you tried to jump out of a sort() block or subroutine, which is a no-no.
753 See L<perlfunc/goto>.
755 =item Can't goto subroutine from an eval-string
757 (F) The "goto subroutine" call can't be used to jump out of an eval
758 "string". (You can use it to jump out of an eval {BLOCK}, but you
759 probably don't want to.)
761 =item Can't goto subroutine outside a subroutine
763 (F) The deeply magical "goto subroutine" call can only replace one
764 subroutine call for another. It can't manufacture one out of whole
765 cloth. In general you should be calling it out of only an AUTOLOAD
766 routine anyway. See L<perlfunc/goto>.
768 =item Can't ignore signal CHLD, forcing to default
770 (W signal) Perl has detected that it is being run with the SIGCHLD
771 signal (sometimes known as SIGCLD) disabled. Since disabling this
772 signal will interfere with proper determination of exit status of child
773 processes, Perl has reset the signal to its default value. This
774 situation typically indicates that the parent program under which Perl
775 may be running (e.g. cron) is being very careless.
777 =item Can't "last" outside a loop block
779 (F) A "last" statement was executed to break out of the current block,
780 except that there's this itty bitty problem called there isn't a current
781 block. Note that an "if" or "else" block doesn't count as a "loopish"
782 block, as doesn't a block given to sort(), map() or grep(). You can
783 usually double the curlies to get the same effect though, because the
784 inner curlies will be considered a block that loops once. See
787 =item Can't load '%s' for module %s
789 (F) The module you tried to load failed to load a dynamic extension. This
790 may either mean that you upgraded your version of perl to one that is
791 incompatible with your old dynamic extensions (which is known to happen
792 between major versions of perl), or (more likely) that your dynamic
793 extension was built against an older version of the library that is
794 installed on your system. You may need to rebuild your old dynamic
797 =item Can't localize lexical variable %s
799 (F) You used local on a variable name that was previously declared as a
800 lexical variable using "my". This is not allowed. If you want to
801 localize a package variable of the same name, qualify it with the
804 =item Can't localize through a reference
806 (F) You said something like C<local $$ref>, which Perl can't currently
807 handle, because when it goes to restore the old value of whatever $ref
808 pointed to after the scope of the local() is finished, it can't be sure
809 that $ref will still be a reference.
811 =item Can't locate %s
813 (F) You said to C<do> (or C<require>, or C<use>) a file that couldn't be
814 found. Perl looks for the file in all the locations mentioned in @INC,
815 unless the file name included the full path to the file. Perhaps you
816 need to set the PERL5LIB or PERL5OPT environment variable to say where
817 the extra library is, or maybe the script needs to add the library name
818 to @INC. Or maybe you just misspelled the name of the file. See
819 L<perlfunc/require> and L<lib>.
821 =item Can't locate auto/%s.al in @INC
823 (F) A function (or method) was called in a package which allows
824 autoload, but there is no function to autoload. Most probable causes
825 are a misprint in a function/method name or a failure to C<AutoSplit>
826 the file, say, by doing C<make install>.
828 =item Can't locate loadable object for module %s in @INC
830 (F) The module you loaded is trying to load an external library, like
831 for example, C<foo.so> or C<bar.dll>, but the L<DynaLoader> module was
832 unable to locate this library. See L<DynaLoader>.
834 =item Can't locate object method "%s" via package "%s"
836 (F) You called a method correctly, and it correctly indicated a package
837 functioning as a class, but that package doesn't define that particular
838 method, nor does any of its base classes. See L<perlobj>.
840 =item Can't locate package %s for @%s::ISA
842 (W syntax) The @ISA array contained the name of another package that
843 doesn't seem to exist.
845 =item Can't locate PerlIO%s
847 (F) You tried to use in open() a PerlIO layer that does not exist,
848 e.g. open(FH, ">:nosuchlayer", "somefile").
850 =item Can't make list assignment to \%ENV on this system
852 (F) List assignment to %ENV is not supported on some systems, notably
855 =item Can't modify %s in %s
857 (F) You aren't allowed to assign to the item indicated, or otherwise try
858 to change it, such as with an auto-increment.
860 =item Can't modify nonexistent substring
862 (P) The internal routine that does assignment to a substr() was handed
865 =item Can't modify non-lvalue subroutine call
867 (F) Subroutines meant to be used in lvalue context should be declared as
868 such, see L<perlsub/"Lvalue subroutines">.
870 =item Can't msgrcv to read-only var
872 (F) The target of a msgrcv must be modifiable to be used as a receive
875 =item Can't "next" outside a loop block
877 (F) A "next" statement was executed to reiterate the current block, but
878 there isn't a current block. Note that an "if" or "else" block doesn't
879 count as a "loopish" block, as doesn't a block given to sort(), map() or
880 grep(). You can usually double the curlies to get the same effect
881 though, because the inner curlies will be considered a block that loops
882 once. See L<perlfunc/next>.
884 =item Can't open %s: %s
886 (S inplace) The implicit opening of a file through use of the C<< <> >>
887 filehandle, either implicitly under the C<-n> or C<-p> command-line
888 switches, or explicitly, failed for the indicated reason. Usually this
889 is because you don't have read permission for a file which you named on
892 =item Can't open a reference
894 (W io) You tried to open a scalar reference for reading or writing,
895 using the 3-arg open() syntax :
899 but your version of perl is compiled without perlio, and this form of
900 open is not supported.
902 =item Can't open bidirectional pipe
904 (W pipe) You tried to say C<open(CMD, "|cmd|")>, which is not supported.
905 You can try any of several modules in the Perl library to do this, such
906 as IPC::Open2. Alternately, direct the pipe's output to a file using
907 ">", and then read it in under a different file handle.
909 =item Can't open error file %s as stderr
911 (F) An error peculiar to VMS. Perl does its own command line
912 redirection, and couldn't open the file specified after '2>' or '2>>' on
913 the command line for writing.
915 =item Can't open input file %s as stdin
917 (F) An error peculiar to VMS. Perl does its own command line
918 redirection, and couldn't open the file specified after '<' on the
919 command line for reading.
921 =item Can't open output file %s as stdout
923 (F) An error peculiar to VMS. Perl does its own command line
924 redirection, and couldn't open the file specified after '>' or '>>' on
925 the command line for writing.
927 =item Can't open output pipe (name: %s)
929 (P) An error peculiar to VMS. Perl does its own command line
930 redirection, and couldn't open the pipe into which to send data destined
933 =item Can't open perl script%s
935 (F) The script you specified can't be opened for the indicated reason.
937 If you're debugging a script that uses #!, and normally relies on the
938 shell's $PATH search, the -S option causes perl to do that search, so
939 you don't have to type the path or C<`which $scriptname`>.
941 =item Can't read CRTL environ
943 (S) A warning peculiar to VMS. Perl tried to read an element of %ENV
944 from the CRTL's internal environment array and discovered the array was
945 missing. You need to figure out where your CRTL misplaced its environ
946 or define F<PERL_ENV_TABLES> (see L<perlvms>) so that environ is not
949 =item Can't redefine active sort subroutine %s
951 (F) Perl optimizes the internal handling of sort subroutines and keeps
952 pointers into them. You tried to redefine one such sort subroutine when
953 it was currently active, which is not allowed. If you really want to do
954 this, you should write C<sort { &func } @x> instead of C<sort func @x>.
956 =item Can't "redo" outside a loop block
958 (F) A "redo" statement was executed to restart the current block, but
959 there isn't a current block. Note that an "if" or "else" block doesn't
960 count as a "loopish" block, as doesn't a block given to sort(), map()
961 or grep(). You can usually double the curlies to get the same effect
962 though, because the inner curlies will be considered a block that
963 loops once. See L<perlfunc/redo>.
965 =item Can't remove %s: %s, skipping file
967 (S inplace) You requested an inplace edit without creating a backup
968 file. Perl was unable to remove the original file to replace it with
969 the modified file. The file was left unmodified.
971 =item Can't rename %s to %s: %s, skipping file
973 (S inplace) The rename done by the B<-i> switch failed for some reason,
974 probably because you don't have write permission to the directory.
976 =item Can't reopen input pipe (name: %s) in binary mode
978 (P) An error peculiar to VMS. Perl thought stdin was a pipe, and tried
979 to reopen it to accept binary data. Alas, it failed.
981 =item Can't resolve method `%s' overloading `%s' in package `%s'
983 (F|P) Error resolving overloading specified by a method name (as opposed
984 to a subroutine reference): no such method callable via the package. If
985 method name is C<???>, this is an internal error.
987 =item Can't reswap uid and euid
989 (P) The setreuid() call failed for some reason in the setuid emulator of
992 =item Can't return %s from lvalue subroutine
994 (F) Perl detected an attempt to return illegal lvalues (such as
995 temporary or readonly values) from a subroutine used as an lvalue. This
998 =item Can't return outside a subroutine
1000 (F) The return statement was executed in mainline code, that is, where
1001 there was no subroutine call to return out of. See L<perlsub>.
1003 =item Can't return %s to lvalue scalar context
1005 (F) You tried to return a complete array or hash from an lvalue subroutine,
1006 but you called the subroutine in a way that made Perl think you meant
1007 to return only one value. You probably meant to write parentheses around
1008 the call to the subroutine, which tell Perl that the call should be in
1011 =item Can't stat script "%s"
1013 (P) For some reason you can't fstat() the script even though you have it
1014 open already. Bizarre.
1016 =item Can't swap uid and euid
1018 (P) The setreuid() call failed for some reason in the setuid emulator of
1021 =item Can't take log of %g
1023 (F) For ordinary real numbers, you can't take the logarithm of a
1024 negative number or zero. There's a Math::Complex package that comes
1025 standard with Perl, though, if you really want to do that for the
1028 =item Can't take sqrt of %g
1030 (F) For ordinary real numbers, you can't take the square root of a
1031 negative number. There's a Math::Complex package that comes standard
1032 with Perl, though, if you really want to do that.
1034 =item Can't undef active subroutine
1036 (F) You can't undefine a routine that's currently running. You can,
1037 however, redefine it while it's running, and you can even undef the
1038 redefined subroutine while the old routine is running. Go figure.
1042 (F) You tried to unshift an "unreal" array that can't be unshifted, such
1043 as the main Perl stack.
1045 =item Can't upgrade that kind of scalar
1047 (P) The internal sv_upgrade routine adds "members" to an SV, making it
1048 into a more specialized kind of SV. The top several SV types are so
1049 specialized, however, that they cannot be interconverted. This message
1050 indicates that such a conversion was attempted.
1052 =item Can't upgrade to undef
1054 (P) The undefined SV is the bottom of the totem pole, in the scheme of
1055 upgradability. Upgrading to undef indicates an error in the code
1058 =item Can't use anonymous symbol table for method lookup
1060 (F) The internal routine that does method lookup was handed a symbol
1061 table that doesn't have a name. Symbol tables can become anonymous
1062 for example by undefining stashes: C<undef %Some::Package::>.
1064 =item Can't use an undefined value as %s reference
1066 (F) A value used as either a hard reference or a symbolic reference must
1067 be a defined value. This helps to delurk some insidious errors.
1069 =item Can't use bareword ("%s") as %s ref while "strict refs" in use
1071 (F) Only hard references are allowed by "strict refs". Symbolic
1072 references are disallowed. See L<perlref>.
1074 =item Can't use %! because Errno.pm is not available
1076 (F) The first time the %! hash is used, perl automatically loads the
1077 Errno.pm module. The Errno module is expected to tie the %! hash to
1078 provide symbolic names for C<$!> errno values.
1080 =item Can't use both '<' and '>' after type '%c' in %s
1082 (F) A type cannot be forced to have both big-endian and little-endian
1083 byte-order at the same time, so this combination of modifiers is not
1084 allowed. See L<perlfunc/pack>.
1086 =item Can't use %s for loop variable
1088 (F) Only a simple scalar variable may be used as a loop variable on a
1091 =item Can't use global %s in "my"
1093 (F) You tried to declare a magical variable as a lexical variable. This
1094 is not allowed, because the magic can be tied to only one location
1095 (namely the global variable) and it would be incredibly confusing to
1096 have variables in your program that looked like magical variables but
1099 =item Can't use '%c' in a group with different byte-order in %s
1101 (F) You attempted to force a different byte-order on a type
1102 that is already inside a group with a byte-order modifier.
1103 For example you cannot force little-endianness on a type that
1104 is inside a big-endian group.
1106 =item Can't use "my %s" in sort comparison
1108 (F) The global variables $a and $b are reserved for sort comparisons.
1109 You mentioned $a or $b in the same line as the <=> or cmp operator,
1110 and the variable had earlier been declared as a lexical variable.
1111 Either qualify the sort variable with the package name, or rename the
1114 =item Can't use %s ref as %s ref
1116 (F) You've mixed up your reference types. You have to dereference a
1117 reference of the type needed. You can use the ref() function to
1118 test the type of the reference, if need be.
1120 =item Can't use string ("%s") as %s ref while "strict refs" in use
1122 (F) Only hard references are allowed by "strict refs". Symbolic
1123 references are disallowed. See L<perlref>.
1125 =item Can't use subscript on %s
1127 (F) The compiler tried to interpret a bracketed expression as a
1128 subscript. But to the left of the brackets was an expression that
1129 didn't look like an array reference, or anything else subscriptable.
1131 =item Can't use \%c to mean $%c in expression
1133 (W syntax) In an ordinary expression, backslash is a unary operator that
1134 creates a reference to its argument. The use of backslash to indicate a
1135 backreference to a matched substring is valid only as part of a regular
1136 expression pattern. Trying to do this in ordinary Perl code produces a
1137 value that prints out looking like SCALAR(0xdecaf). Use the $1 form
1140 =item Can't weaken a nonreference
1142 (F) You attempted to weaken something that was not a reference. Only
1143 references can be weakened.
1145 =item Can't x= to read-only value
1147 (F) You tried to repeat a constant value (often the undefined value)
1148 with an assignment operator, which implies modifying the value itself.
1149 Perhaps you need to copy the value to a temporary, and repeat that.
1151 =item Character in "C" format wrapped in pack
1157 where $x is either less than 0 or more than 255; the C<"C"> format is
1158 only for encoding native operating system characters (ASCII, EBCDIC,
1159 and so on) and not for Unicode characters, so Perl behaved as if you meant
1163 If you actually want to pack Unicode codepoints, use the C<"U"> format
1166 =item Character in "c" format wrapped in pack
1172 where $x is either less than -128 or more than 127; the C<"c"> format
1173 is only for encoding native operating system characters (ASCII, EBCDIC,
1174 and so on) and not for Unicode characters, so Perl behaved as if you meant
1176 pack("c", $x & 255);
1178 If you actually want to pack Unicode codepoints, use the C<"U"> format
1181 =item close() on unopened filehandle %s
1183 (W unopened) You tried to close a filehandle that was never opened.
1185 =item Code missing after '/'
1187 (F) You had a (sub-)template that ends with a '/'. There must be another
1188 template code following the slash. See L<perlfunc/pack>.
1190 =item %s: Command not found
1192 (A) You've accidentally run your script through B<csh> instead of Perl.
1193 Check the #! line, or manually feed your script into Perl yourself.
1195 =item Compilation failed in require
1197 (F) Perl could not compile a file specified in a C<require> statement.
1198 Perl uses this generic message when none of the errors that it
1199 encountered were severe enough to halt compilation immediately.
1201 =item Complex regular subexpression recursion limit (%d) exceeded
1203 (W regexp) The regular expression engine uses recursion in complex
1204 situations where back-tracking is required. Recursion depth is limited
1205 to 32766, or perhaps less in architectures where the stack cannot grow
1206 arbitrarily. ("Simple" and "medium" situations are handled without
1207 recursion and are not subject to a limit.) Try shortening the string
1208 under examination; looping in Perl code (e.g. with C<while>) rather than
1209 in the regular expression engine; or rewriting the regular expression so
1210 that it is simpler or backtracks less. (See L<perlfaq2> for information
1211 on I<Mastering Regular Expressions>.)
1213 =item cond_broadcast() called on unlocked variable
1215 (W threads) Within a thread-enabled program, you tried to call
1216 cond_broadcast() on a variable which wasn't locked. The cond_broadcast()
1217 function is used to wake up another thread that is waiting in a
1218 cond_wait(). To ensure that the signal isn't sent before the other thread
1219 has a chance to enter the wait, it is usual for the signaling thread to
1220 first wait for a lock on variable. This lock attempt will only succeed
1221 after the other thread has entered cond_wait() and thus relinquished the
1224 =item cond_signal() called on unlocked variable
1226 (W threads) Within a thread-enabled program, you tried to call
1227 cond_signal() on a variable which wasn't locked. The cond_signal()
1228 function is used to wake up another thread that is waiting in a
1229 cond_wait(). To ensure that the signal isn't sent before the other thread
1230 has a chance to enter the wait, it is usual for the signaling thread to
1231 first wait for a lock on variable. This lock attempt will only succeed
1232 after the other thread has entered cond_wait() and thus relinquished the
1235 =item connect() on closed socket %s
1237 (W closed) You tried to do a connect on a closed socket. Did you forget
1238 to check the return value of your socket() call? See
1239 L<perlfunc/connect>.
1241 =item Constant(%s)%s: %s
1243 (F) The parser found inconsistencies either while attempting to define
1244 an overloaded constant, or when trying to find the character name
1245 specified in the C<\N{...}> escape. Perhaps you forgot to load the
1246 corresponding C<overload> or C<charnames> pragma? See L<charnames> and
1249 =item Constant is not %s reference
1251 (F) A constant value (perhaps declared using the C<use constant> pragma)
1252 is being dereferenced, but it amounts to the wrong type of reference.
1253 The message indicates the type of reference that was expected. This
1254 usually indicates a syntax error in dereferencing the constant value.
1255 See L<perlsub/"Constant Functions"> and L<constant>.
1257 =item Constant subroutine %s redefined
1259 (S) You redefined a subroutine which had previously been
1260 eligible for inlining. See L<perlsub/"Constant Functions"> for
1261 commentary and workarounds.
1263 =item Constant subroutine %s undefined
1265 (W misc) You undefined a subroutine which had previously been eligible
1266 for inlining. See L<perlsub/"Constant Functions"> for commentary and
1269 =item Copy method did not return a reference
1271 (F) The method which overloads "=" is buggy. See
1272 L<overload/Copy Constructor>.
1274 =item CORE::%s is not a keyword
1276 (F) The CORE:: namespace is reserved for Perl keywords.
1278 =item corrupted regexp pointers
1280 (P) The regular expression engine got confused by what the regular
1281 expression compiler gave it.
1283 =item corrupted regexp program
1285 (P) The regular expression engine got passed a regexp program without a
1288 =item Corrupt malloc ptr 0x%lx at 0x%lx
1290 (P) The malloc package that comes with Perl had an internal failure.
1292 =item Count after length/code in unpack
1294 (F) You had an unpack template indicating a counted-length string, but
1295 you have also specified an explicit size for the string. See
1298 =item Deep recursion on subroutine "%s"
1300 (W recursion) This subroutine has called itself (directly or indirectly)
1301 100 times more than it has returned. This probably indicates an
1302 infinite recursion, unless you're writing strange benchmark programs, in
1303 which case it indicates something else.
1305 =item defined(@array) is deprecated
1307 (D deprecated) defined() is not usually useful on arrays because it
1308 checks for an undefined I<scalar> value. If you want to see if the
1309 array is empty, just use C<if (@array) { # not empty }> for example.
1311 =item defined(%hash) is deprecated
1313 (D deprecated) defined() is not usually useful on hashes because it
1314 checks for an undefined I<scalar> value. If you want to see if the hash
1315 is empty, just use C<if (%hash) { # not empty }> for example.
1317 =item %s defines neither package nor VERSION--version check failed
1319 (F) You said something like "use Module 42" but in the Module file
1320 there are neither package declarations nor a C<$VERSION>.
1322 =item Delimiter for here document is too long
1324 (F) In a here document construct like C<<<FOO>, the label C<FOO> is too
1325 long for Perl to handle. You have to be seriously twisted to write code
1326 that triggers this error.
1328 =item Deprecated use of my() in false conditional
1330 (D deprecated) You used a declaration similar to C<my $x if 0>.
1331 There has been a long-standing bug in Perl that causes a lexical variable
1332 not to be cleared at scope exit when its declaration includes a false
1333 conditional. Some people have exploited this bug to achieve a kind of
1334 static variable. Since we intend to fix this bug, we don't want people
1335 relying on this behavior. You can achieve a similar static effect by
1336 declaring the variable in a separate block outside the function, eg
1338 sub f { my $x if 0; return $x++ }
1342 { my $x; sub f { return $x++ } }
1344 =item DESTROY created new reference to dead object '%s'
1346 (F) A DESTROY() method created a new reference to the object which is
1347 just being DESTROYed. Perl is confused, and prefers to abort rather than
1348 to create a dangling reference.
1350 =item Did not produce a valid header
1354 =item %s did not return a true value
1356 (F) A required (or used) file must return a true value to indicate that
1357 it compiled correctly and ran its initialization code correctly. It's
1358 traditional to end such a file with a "1;", though any true value would
1359 do. See L<perlfunc/require>.
1361 =item (Did you mean &%s instead?)
1363 (W) You probably referred to an imported subroutine &FOO as $FOO or some
1366 =item (Did you mean "local" instead of "our"?)
1368 (W misc) Remember that "our" does not localize the declared global
1369 variable. You have declared it again in the same lexical scope, which
1372 =item (Did you mean $ or @ instead of %?)
1374 (W) You probably said %hash{$key} when you meant $hash{$key} or
1375 @hash{@keys}. On the other hand, maybe you just meant %hash and got
1380 (F) You passed die() an empty string (the equivalent of C<die "">) or
1381 you called it with no args and both C<$@> and C<$_> were empty.
1383 =item Document contains no data
1387 =item %s does not define %s::VERSION--version check failed
1389 (F) You said something like "use Module 42" but the Module did not
1390 define a C<$VERSION.>
1392 =item '/' does not take a repeat count
1394 (F) You cannot put a repeat count of any kind right after the '/' code.
1395 See L<perlfunc/pack>.
1397 =item Don't know how to handle magic of type '%s'
1399 (P) The internal handling of magical variables has been cursed.
1401 =item do_study: out of memory
1403 (P) This should have been caught by safemalloc() instead.
1405 =item (Do you need to predeclare %s?)
1407 (S syntax) This is an educated guess made in conjunction with the message
1408 "%s found where operator expected". It often means a subroutine or module
1409 name is being referenced that hasn't been declared yet. This may be
1410 because of ordering problems in your file, or because of a missing
1411 "sub", "package", "require", or "use" statement. If you're referencing
1412 something that isn't defined yet, you don't actually have to define the
1413 subroutine or package before the current location. You can use an empty
1414 "sub foo;" or "package FOO;" to enter a "forward" declaration.
1416 =item dump() better written as CORE::dump()
1418 (W misc) You used the obsolescent C<dump()> built-in function, without fully
1419 qualifying it as C<CORE::dump()>. Maybe it's a typo. See L<perlfunc/dump>.
1421 =item Duplicate free() ignored
1423 (S malloc) An internal routine called free() on something that had
1426 =item Duplicate modifier '%c' after '%c' in %s
1428 (W) You have applied the same modifier more than once after a type
1429 in a pack template. See L<perlfunc/pack>.
1431 =item elseif should be elsif
1433 (S syntax) There is no keyword "elseif" in Perl because Larry thinks it's
1434 ugly. Your code will be interpreted as an attempt to call a method named
1435 "elseif" for the class returned by the following block. This is
1436 unlikely to be what you want.
1440 (F) C<\p> and C<\P> are used to introduce a named Unicode property, as
1441 described in L<perlunicode> and L<perlre>. You used C<\p> or C<\P> in
1442 a regular expression without specifying the property name.
1444 =item entering effective %s failed
1446 (F) While under the C<use filetest> pragma, switching the real and
1447 effective uids or gids failed.
1449 =item %ENV is aliased to %s
1451 (F) You're running under taint mode, and the C<%ENV> variable has been
1452 aliased to another hash, so it doesn't reflect anymore the state of the
1453 program's environment. This is potentially insecure.
1455 =item Error converting file specification %s
1457 (F) An error peculiar to VMS. Because Perl may have to deal with file
1458 specifications in either VMS or Unix syntax, it converts them to a
1459 single form when it must operate on them directly. Either you've passed
1460 an invalid file specification to Perl, or you've found a case the
1461 conversion routines don't handle. Drat.
1463 =item %s: Eval-group in insecure regular expression
1465 (F) Perl detected tainted data when trying to compile a regular
1466 expression that contains the C<(?{ ... })> zero-width assertion, which
1467 is unsafe. See L<perlre/(?{ code })>, and L<perlsec>.
1469 =item %s: Eval-group not allowed at run time
1471 (F) Perl tried to compile a regular expression containing the
1472 C<(?{ ... })> zero-width assertion at run time, as it would when the
1473 pattern contains interpolated values. Since that is a security risk, it
1474 is not allowed. If you insist, you may still do this by explicitly
1475 building the pattern from an interpolated string at run time and using
1476 that in an eval(). See L<perlre/(?{ code })>.
1478 =item %s: Eval-group not allowed, use re 'eval'
1480 (F) A regular expression contained the C<(?{ ... })> zero-width
1481 assertion, but that construct is only allowed when the C<use re 'eval'>
1482 pragma is in effect. See L<perlre/(?{ code })>.
1484 =item Excessively long <> operator
1486 (F) The contents of a <> operator may not exceed the maximum size of a
1487 Perl identifier. If you're just trying to glob a long list of
1488 filenames, try using the glob() operator, or put the filenames into a
1489 variable and glob that.
1491 =item exec? I'm not *that* kind of operating system
1493 (F) The C<exec> function is not implemented in MacPerl. See L<perlport>.
1495 =item Execution of %s aborted due to compilation errors
1497 (F) The final summary message when a Perl compilation fails.
1499 =item Exiting eval via %s
1501 (W exiting) You are exiting an eval by unconventional means, such as a
1502 goto, or a loop control statement.
1504 =item Exiting format via %s
1506 (W exiting) You are exiting a format by unconventional means, such as a
1507 goto, or a loop control statement.
1509 =item Exiting pseudo-block via %s
1511 (W exiting) You are exiting a rather special block construct (like a
1512 sort block or subroutine) by unconventional means, such as a goto, or a
1513 loop control statement. See L<perlfunc/sort>.
1515 =item Exiting subroutine via %s
1517 (W exiting) You are exiting a subroutine by unconventional means, such
1518 as a goto, or a loop control statement.
1520 =item Exiting substitution via %s
1522 (W exiting) You are exiting a substitution by unconventional means, such
1523 as a return, a goto, or a loop control statement.
1525 =item Explicit blessing to '' (assuming package main)
1527 (W misc) You are blessing a reference to a zero length string. This has
1528 the effect of blessing the reference into the package main. This is
1529 usually not what you want. Consider providing a default target package,
1530 e.g. bless($ref, $p || 'MyPackage');
1532 =item %s: Expression syntax
1534 (A) You've accidentally run your script through B<csh> instead of Perl.
1535 Check the #! line, or manually feed your script into Perl yourself.
1537 =item %s failed--call queue aborted
1539 (F) An untrapped exception was raised while executing a CHECK, INIT, or
1540 END subroutine. Processing of the remainder of the queue of such
1541 routines has been prematurely ended.
1543 =item False [] range "%s" in regex; marked by <-- HERE in m/%s/
1545 (W regexp) A character class range must start and end at a literal
1546 character, not another character class like C<\d> or C<[:alpha:]>. The "-"
1547 in your false range is interpreted as a literal "-". Consider quoting the
1548 "-", "\-". The <-- HERE shows in the regular expression about where the
1549 problem was discovered. See L<perlre>.
1551 =item Fatal VMS error at %s, line %d
1553 (P) An error peculiar to VMS. Something untoward happened in a VMS
1554 system service or RTL routine; Perl's exit status should provide more
1555 details. The filename in "at %s" and the line number in "line %d" tell
1556 you which section of the Perl source code is distressed.
1558 =item fcntl is not implemented
1560 (F) Your machine apparently doesn't implement fcntl(). What is this, a
1561 PDP-11 or something?
1563 =item Filehandle %s opened only for input
1565 (W io) You tried to write on a read-only filehandle. If you intended
1566 it to be a read-write filehandle, you needed to open it with "+<" or
1567 "+>" or "+>>" instead of with "<" or nothing. If you intended only to
1568 write the file, use ">" or ">>". See L<perlfunc/open>.
1570 =item Filehandle %s opened only for output
1572 (W io) You tried to read from a filehandle opened only for writing, If
1573 you intended it to be a read/write filehandle, you needed to open it
1574 with "+<" or "+>" or "+>>" instead of with "<" or nothing. If you
1575 intended only to read from the file, use "<". See L<perlfunc/open>.
1576 Another possibility is that you attempted to open filedescriptor 0
1577 (also known as STDIN) for output (maybe you closed STDIN earlier?).
1579 =item Filehandle %s reopened as %s only for input
1581 (W io) You opened for reading a filehandle that got the same filehandle id
1582 as STDOUT or STDERR. This occured because you closed STDOUT or STDERR
1585 =item Filehandle STDIN reopened as %s only for output
1587 (W io) You opened for writing a filehandle that got the same filehandle id
1588 as STDIN. This occured because you closed STDIN previously.
1590 =item Final $ should be \$ or $name
1592 (F) You must now decide whether the final $ in a string was meant to be
1593 a literal dollar sign, or was meant to introduce a variable name that
1594 happens to be missing. So you have to put either the backslash or the
1597 =item flock() on closed filehandle %s
1599 (W closed) The filehandle you're attempting to flock() got itself closed
1600 some time before now. Check your control flow. flock() operates on
1601 filehandles. Are you attempting to call flock() on a dirhandle by the
1604 =item Format not terminated
1606 (F) A format must be terminated by a line with a solitary dot. Perl got
1607 to the end of your file without finding such a line.
1609 =item Format %s redefined
1611 (W redefine) You redefined a format. To suppress this warning, say
1614 no warnings 'redefine';
1615 eval "format NAME =...";
1618 =item Found = in conditional, should be ==
1628 (or something like that).
1630 =item %s found where operator expected
1632 (S syntax) The Perl lexer knows whether to expect a term or an operator.
1633 If it sees what it knows to be a term when it was expecting to see an
1634 operator, it gives you this warning. Usually it indicates that an
1635 operator or delimiter was omitted, such as a semicolon.
1637 =item gdbm store returned %d, errno %d, key "%s"
1639 (S) A warning from the GDBM_File extension that a store failed.
1641 =item gethostent not implemented
1643 (F) Your C library apparently doesn't implement gethostent(), probably
1644 because if it did, it'd feel morally obligated to return every hostname
1647 =item get%sname() on closed socket %s
1649 (W closed) You tried to get a socket or peer socket name on a closed
1650 socket. Did you forget to check the return value of your socket() call?
1652 =item getpwnam returned invalid UIC %#o for user "%s"
1654 (S) A warning peculiar to VMS. The call to C<sys$getuai> underlying the
1655 C<getpwnam> operator returned an invalid UIC.
1657 =item getsockopt() on closed socket %s
1659 (W closed) You tried to get a socket option on a closed socket. Did you
1660 forget to check the return value of your socket() call? See
1661 L<perlfunc/getsockopt>.
1663 =item Global symbol "%s" requires explicit package name
1665 (F) You've said "use strict vars", which indicates that all variables
1666 must either be lexically scoped (using "my"), declared beforehand using
1667 "our", or explicitly qualified to say which package the global variable
1670 =item glob failed (%s)
1672 (W glob) Something went wrong with the external program(s) used for
1673 C<glob> and C<< <*.c> >>. Usually, this means that you supplied a
1674 C<glob> pattern that caused the external program to fail and exit with a
1675 nonzero status. If the message indicates that the abnormal exit
1676 resulted in a coredump, this may also mean that your csh (C shell) is
1677 broken. If so, you should change all of the csh-related variables in
1678 config.sh: If you have tcsh, make the variables refer to it as if it
1679 were csh (e.g. C<full_csh='/usr/bin/tcsh'>); otherwise, make them all
1680 empty (except that C<d_csh> should be C<'undef'>) so that Perl will
1681 think csh is missing. In either case, after editing config.sh, run
1682 C<./Configure -S> and rebuild Perl.
1684 =item Glob not terminated
1686 (F) The lexer saw a left angle bracket in a place where it was expecting
1687 a term, so it's looking for the corresponding right angle bracket, and
1688 not finding it. Chances are you left some needed parentheses out
1689 earlier in the line, and you really meant a "less than".
1691 =item Got an error from DosAllocMem
1693 (P) An error peculiar to OS/2. Most probably you're using an obsolete
1694 version of Perl, and this should not happen anyway.
1696 =item goto must have label
1698 (F) Unlike with "next" or "last", you're not allowed to goto an
1699 unspecified destination. See L<perlfunc/goto>.
1701 =item ()-group starts with a count
1703 (F) A ()-group started with a count. A count is
1704 supposed to follow something: a template character or a ()-group.
1705 See L<perlfunc/pack>.
1707 =item %s had compilation errors
1709 (F) The final summary message when a C<perl -c> fails.
1711 =item Had to create %s unexpectedly
1713 (S internal) A routine asked for a symbol from a symbol table that ought
1714 to have existed already, but for some reason it didn't, and had to be
1715 created on an emergency basis to prevent a core dump.
1717 =item Hash %%s missing the % in argument %d of %s()
1719 (D deprecated) Really old Perl let you omit the % on hash names in some
1720 spots. This is now heavily deprecated.
1722 =item %s has too many errors
1724 (F) The parser has given up trying to parse the program after 10 errors.
1725 Further error messages would likely be uninformative.
1727 =item Hexadecimal number > 0xffffffff non-portable
1729 (W portable) The hexadecimal number you specified is larger than 2**32-1
1730 (4294967295) and therefore non-portable between systems. See
1731 L<perlport> for more on portability concerns.
1733 =item Identifier too long
1735 (F) Perl limits identifiers (names for variables, functions, etc.) to
1736 about 250 characters for simple names, and somewhat more for compound
1737 names (like C<$A::B>). You've exceeded Perl's limits. Future versions
1738 of Perl are likely to eliminate these arbitrary limitations.
1740 =item Illegal binary digit %s
1742 (F) You used a digit other than 0 or 1 in a binary number.
1744 =item Illegal binary digit %s ignored
1746 (W digit) You may have tried to use a digit other than 0 or 1 in a
1747 binary number. Interpretation of the binary number stopped before the
1750 =item Illegal character %s (carriage return)
1752 (F) Perl normally treats carriage returns in the program text as it
1753 would any other whitespace, which means you should never see this error
1754 when Perl was built using standard options. For some reason, your
1755 version of Perl appears to have been built without this support. Talk
1756 to your Perl administrator.
1758 =item Illegal character in prototype for %s : %s
1760 (W syntax) An illegal character was found in a prototype declaration. Legal
1761 characters in prototypes are $, @, %, *, ;, [, ], &, and \.
1763 =item Illegal declaration of anonymous subroutine
1765 (F) When using the C<sub> keyword to construct an anonymous subroutine,
1766 you must always specify a block of code. See L<perlsub>.
1768 =item Illegal declaration of subroutine %s
1770 (F) A subroutine was not declared correctly. See L<perlsub>.
1772 =item Illegal division by zero
1774 (F) You tried to divide a number by 0. Either something was wrong in
1775 your logic, or you need to put a conditional in to guard against
1778 =item Illegal hexadecimal digit %s ignored
1780 (W digit) You may have tried to use a character other than 0 - 9 or
1781 A - F, a - f in a hexadecimal number. Interpretation of the hexadecimal
1782 number stopped before the illegal character.
1784 =item Illegal modulus zero
1786 (F) You tried to divide a number by 0 to get the remainder. Most
1787 numbers don't take to this kindly.
1789 =item Illegal number of bits in vec
1791 (F) The number of bits in vec() (the third argument) must be a power of
1792 two from 1 to 32 (or 64, if your platform supports that).
1794 =item Illegal octal digit %s
1796 (F) You used an 8 or 9 in an octal number.
1798 =item Illegal octal digit %s ignored
1800 (W digit) You may have tried to use an 8 or 9 in an octal number.
1801 Interpretation of the octal number stopped before the 8 or 9.
1803 =item Illegal switch in PERL5OPT: %s
1805 (X) The PERL5OPT environment variable may only be used to set the
1806 following switches: B<-[DIMUdmtw]>.
1808 =item Ill-formed CRTL environ value "%s"
1810 (W internal) A warning peculiar to VMS. Perl tried to read the CRTL's
1811 internal environ array, and encountered an element without the C<=>
1812 delimiter used to separate keys from values. The element is ignored.
1814 =item Ill-formed message in prime_env_iter: |%s|
1816 (W internal) A warning peculiar to VMS. Perl tried to read a logical
1817 name or CLI symbol definition when preparing to iterate over %ENV, and
1818 didn't see the expected delimiter between key and value, so the line was
1821 =item Impossible to activate assertion call
1823 (W assertions) You're calling an assertion function in a block that is
1824 not under the control of the C<assertions> pragma.
1826 =item (in cleanup) %s
1828 (W misc) This prefix usually indicates that a DESTROY() method raised
1829 the indicated exception. Since destructors are usually called by the
1830 system at arbitrary points during execution, and often a vast number of
1831 times, the warning is issued only once for any number of failures that
1832 would otherwise result in the same message being repeated.
1834 Failure of user callbacks dispatched using the C<G_KEEPERR> flag could
1835 also result in this warning. See L<perlcall/G_KEEPERR>.
1837 =item In EBCDIC the v-string components cannot exceed 2147483647
1839 (F) An error peculiar to EBCDIC. Internally, v-strings are stored as
1840 Unicode code points, and encoded in EBCDIC as UTF-EBCDIC. The UTF-EBCDIC
1841 encoding is limited to code points no larger than 2147483647 (0x7FFFFFFF).
1843 =item Insecure dependency in %s
1845 (F) You tried to do something that the tainting mechanism didn't like.
1846 The tainting mechanism is turned on when you're running setuid or
1847 setgid, or when you specify B<-T> to turn it on explicitly. The
1848 tainting mechanism labels all data that's derived directly or indirectly
1849 from the user, who is considered to be unworthy of your trust. If any
1850 such data is used in a "dangerous" operation, you get this error. See
1851 L<perlsec> for more information.
1853 =item Insecure directory in %s
1855 (F) You can't use system(), exec(), or a piped open in a setuid or
1856 setgid script if C<$ENV{PATH}> contains a directory that is writable by
1857 the world. Also, the PATH must not contain any relative directory.
1860 =item Insecure $ENV{%s} while running %s
1862 (F) You can't use system(), exec(), or a piped open in a setuid or
1863 setgid script if any of C<$ENV{PATH}>, C<$ENV{IFS}>, C<$ENV{CDPATH}>,
1864 C<$ENV{ENV}>, C<$ENV{BASH_ENV}> or C<$ENV{TERM}> are derived from data
1865 supplied (or potentially supplied) by the user. The script must set
1866 the path to a known value, using trustworthy data. See L<perlsec>.
1868 =item Integer overflow in %s number
1870 (W overflow) The hexadecimal, octal or binary number you have specified
1871 either as a literal or as an argument to hex() or oct() is too big for
1872 your architecture, and has been converted to a floating point number.
1873 On a 32-bit architecture the largest hexadecimal, octal or binary number
1874 representable without overflow is 0xFFFFFFFF, 037777777777, or
1875 0b11111111111111111111111111111111 respectively. Note that Perl
1876 transparently promotes all numbers to a floating point representation
1877 internally--subject to loss of precision errors in subsequent
1880 =item Integer overflow in version
1882 (F) Some portion of a version initialization is too large for the
1883 size of integers for your architecture. This is not a warning
1884 because there is no rational reason for a version to try and use a
1885 element larger than typically 2**32. This is usually caused by
1886 trying to use some odd mathematical operation as a version, like
1889 =item Internal disaster in regex; marked by <-- HERE in m/%s/
1891 (P) Something went badly wrong in the regular expression parser.
1892 The <-- HERE shows in the regular expression about where the problem was
1895 =item Internal inconsistency in tracking vforks
1897 (S) A warning peculiar to VMS. Perl keeps track of the number of times
1898 you've called C<fork> and C<exec>, to determine whether the current call
1899 to C<exec> should affect the current script or a subprocess (see
1900 L<perlvms/"exec LIST">). Somehow, this count has become scrambled, so
1901 Perl is making a guess and treating this C<exec> as a request to
1902 terminate the Perl script and execute the specified command.
1904 =item Internal urp in regex; marked by <-- HERE in m/%s/
1906 (P) Something went badly awry in the regular expression parser. The
1907 <-- HERE shows in the regular expression about where the problem was
1910 =item %s (...) interpreted as function
1912 (W syntax) You've run afoul of the rule that says that any list operator
1913 followed by parentheses turns into a function, with all the list
1914 operators arguments found inside the parentheses. See
1915 L<perlop/Terms and List Operators (Leftward)>.
1917 =item Invalid %s attribute: %s
1919 The indicated attribute for a subroutine or variable was not recognized
1920 by Perl or by a user-supplied handler. See L<attributes>.
1922 =item Invalid %s attributes: %s
1924 The indicated attributes for a subroutine or variable were not
1925 recognized by Perl or by a user-supplied handler. See L<attributes>.
1927 =item Invalid conversion in %s: "%s"
1929 (W printf) Perl does not understand the given format conversion. See
1930 L<perlfunc/sprintf>.
1932 =item Invalid [] range "%s" in regex; marked by <-- HERE in m/%s/
1934 (F) The range specified in a character class had a minimum character
1935 greater than the maximum character. One possibility is that you forgot the
1936 C<{}> from your ending C<\x{}> - C<\x> without the curly braces can go only
1937 up to C<ff>. The <-- HERE shows in the regular expression about where the
1938 problem was discovered. See L<perlre>.
1940 =item Invalid range "%s" in transliteration operator
1942 (F) The range specified in the tr/// or y/// operator had a minimum
1943 character greater than the maximum character. See L<perlop>.
1945 =item Invalid separator character %s in attribute list
1947 (F) Something other than a colon or whitespace was seen between the
1948 elements of an attribute list. If the previous attribute had a
1949 parenthesised parameter list, perhaps that list was terminated too soon.
1952 =item Invalid separator character %s in PerlIO layer specification %s
1954 (W layer) When pushing layers onto the Perl I/O system, something other than a
1955 colon or whitespace was seen between the elements of a layer list.
1956 If the previous attribute had a parenthesised parameter list, perhaps that
1957 list was terminated too soon.
1959 =item Invalid type '%s' in %s
1961 (F) The given character is not a valid pack or unpack type.
1962 See L<perlfunc/pack>.
1963 (W) The given character is not a valid pack or unpack type but used to be
1966 =item Invalid version format (multiple underscores)
1968 (F) Versions may contain at most a single underscore, which signals
1969 that the version is a beta release. See L<version> for the allowed
1972 =item Invalid version format (underscores before decimal)
1974 (F) Versions may not contain decimals after the optional underscore.
1975 See L<version> for the allowed version formats.
1977 =item ioctl is not implemented
1979 (F) Your machine apparently doesn't implement ioctl(), which is pretty
1980 strange for a machine that supports C.
1982 =item ioctl() on unopened %s
1984 (W unopened) You tried ioctl() on a filehandle that was never opened.
1985 Check you control flow and number of arguments.
1987 =item IO layers (like "%s") unavailable
1989 (F) Your Perl has not been configured to have PerlIO, and therefore
1990 you cannot use IO layers. To have PerlIO Perl must be configured
1993 =item IO::Socket::atmark not implemented on this architecture
1995 (F) Your machine doesn't implement the sockatmark() functionality,
1996 neither as a system call or an ioctl call (SIOCATMARK).
1998 =item $* is no longer supported
2000 (D deprecated) The special variable C<$*>, deprecated in older perls, has
2001 been removed as of 5.9.0 and is no longer supported. You should use the
2002 C<//m> and C<//s> regexp modifiers instead.
2004 =item `%s' is not a code reference
2006 (W overload) The second (fourth, sixth, ...) argument of overload::constant
2007 needs to be a code reference. Either an anonymous subroutine, or a reference
2010 =item `%s' is not an overloadable type
2012 (W overload) You tried to overload a constant type the overload package is
2015 =item junk on end of regexp
2017 (P) The regular expression parser is confused.
2019 =item Label not found for "last %s"
2021 (F) You named a loop to break out of, but you're not currently in a loop
2022 of that name, not even if you count where you were called from. See
2025 =item Label not found for "next %s"
2027 (F) You named a loop to continue, but you're not currently in a loop of
2028 that name, not even if you count where you were called from. See
2031 =item Label not found for "redo %s"
2033 (F) You named a loop to restart, but you're not currently in a loop of
2034 that name, not even if you count where you were called from. See
2037 =item leaving effective %s failed
2039 (F) While under the C<use filetest> pragma, switching the real and
2040 effective uids or gids failed.
2042 =item length/code after end of string in unpack
2044 (F) While unpacking, the string buffer was alread used up when an unpack
2045 length/code combination tried to obtain more data. This results in
2046 an undefined value for the length. See L<perlfunc/pack>.
2048 =item listen() on closed socket %s
2050 (W closed) You tried to do a listen on a closed socket. Did you forget
2051 to check the return value of your socket() call? See
2054 =item Lookbehind longer than %d not implemented in regex; marked by <-- HERE in m/%s/
2056 (F) There is currently a limit on the length of string which lookbehind can
2057 handle. This restriction may be eased in a future release. The <-- HERE
2058 shows in the regular expression about where the problem was discovered.
2060 =item lstat() on filehandle %s
2062 (W io) You tried to do an lstat on a filehandle. What did you mean
2063 by that? lstat() makes sense only on filenames. (Perl did a fstat()
2064 instead on the filehandle.)
2066 =item Lvalue subs returning %s not implemented yet
2068 (F) Due to limitations in the current implementation, array and hash
2069 values cannot be returned in subroutines used in lvalue context. See
2070 L<perlsub/"Lvalue subroutines">.
2072 =item Malformed integer in [] in pack
2074 (F) Between the brackets enclosing a numeric repeat count only digits
2075 are permitted. See L<perlfunc/pack>.
2077 =item Malformed integer in [] in unpack
2079 (F) Between the brackets enclosing a numeric repeat count only digits
2080 are permitted. See L<perlfunc/pack>.
2082 =item Malformed PERLLIB_PREFIX
2084 (F) An error peculiar to OS/2. PERLLIB_PREFIX should be of the form
2091 with nonempty prefix1 and prefix2. If C<prefix1> is indeed a prefix of
2092 a builtin library search path, prefix2 is substituted. The error may
2093 appear if components are not found, or are too long. See
2094 "PERLLIB_PREFIX" in L<perlos2>.
2096 =item Malformed prototype for %s: %s
2098 (F) You tried to use a function with a malformed prototype. The
2099 syntax of function prototypes is given a brief compile-time check for
2100 obvious errors like invalid characters. A more rigorous check is run
2101 when the function is called.
2103 =item Malformed UTF-8 character (%s)
2105 (W utf8) Perl detected something that didn't comply with UTF-8 encoding rules.
2107 One possible cause is that you read in data that you thought to be in
2108 UTF-8 but it wasn't (it was for example legacy 8-bit data). Another
2109 possibility is careless use of utf8::upgrade().
2111 =item Malformed UTF-16 surrogate
2113 Perl thought it was reading UTF-16 encoded character data but while
2114 doing it Perl met a malformed Unicode surrogate.
2116 =item %s matches null string many times in regex; marked by <-- HERE in m/%s/
2118 (W regexp) The pattern you've specified would be an infinite loop if the
2119 regular expression engine didn't specifically check for that. The <-- HERE
2120 shows in the regular expression about where the problem was discovered.
2123 =item "%s" may clash with future reserved word
2125 (W) This warning may be due to running a perl5 script through a perl4
2126 interpreter, especially if the word that is being warned about is
2129 =item % may not be used in pack
2131 (F) You can't pack a string by supplying a checksum, because the
2132 checksumming process loses information, and you can't go the other way.
2133 See L<perlfunc/unpack>.
2135 =item Method for operation %s not found in package %s during blessing
2137 (F) An attempt was made to specify an entry in an overloading table that
2138 doesn't resolve to a valid subroutine. See L<overload>.
2140 =item Method %s not permitted
2144 =item Might be a runaway multi-line %s string starting on line %d
2146 (S) An advisory indicating that the previous error may have been caused
2147 by a missing delimiter on a string or pattern, because it eventually
2148 ended earlier on the current line.
2150 =item Misplaced _ in number
2152 (W syntax) An underscore (underbar) in a numeric constant did not
2153 separate two digits.
2155 =item Missing argument to -%c
2157 (F) The argument to the indicated command line switch must follow
2158 immediately after the switch, without intervening spaces.
2160 =item Missing %sbrace%s on \N{}
2162 (F) Wrong syntax of character name literal C<\N{charname}> within
2163 double-quotish context.
2165 =item Missing comma after first argument to %s function
2167 (F) While certain functions allow you to specify a filehandle or an
2168 "indirect object" before the argument list, this ain't one of them.
2170 =item Missing command in piped open
2172 (W pipe) You used the C<open(FH, "| command")> or
2173 C<open(FH, "command |")> construction, but the command was missing or
2176 =item Missing control char name in \c
2178 (F) A double-quoted string ended with "\c", without the required control
2181 =item Missing name in "my sub"
2183 (F) The reserved syntax for lexically scoped subroutines requires that
2184 they have a name with which they can be found.
2186 =item Missing $ on loop variable
2188 (F) Apparently you've been programming in B<csh> too much. Variables
2189 are always mentioned with the $ in Perl, unlike in the shells, where it
2190 can vary from one line to the next.
2192 =item (Missing operator before %s?)
2194 (S syntax) This is an educated guess made in conjunction with the message
2195 "%s found where operator expected". Often the missing operator is a comma.
2197 =item Missing right brace on %s
2199 (F) Missing right brace in C<\p{...}> or C<\P{...}>.
2201 =item Missing right curly or square bracket
2203 (F) The lexer counted more opening curly or square brackets than closing
2204 ones. As a general rule, you'll find it's missing near the place you
2207 =item (Missing semicolon on previous line?)
2209 (S syntax) This is an educated guess made in conjunction with the message
2210 "%s found where operator expected". Don't automatically put a semicolon on
2211 the previous line just because you saw this message.
2213 =item Modification of a read-only value attempted
2215 (F) You tried, directly or indirectly, to change the value of a
2216 constant. You didn't, of course, try "2 = 1", because the compiler
2217 catches that. But an easy way to do the same thing is:
2219 sub mod { $_[0] = 1 }
2222 Another way is to assign to a substr() that's off the end of the string.
2224 Yet another way is to assign to a C<foreach> loop I<VAR> when I<VAR>
2225 is aliased to a constant in the look I<LIST>:
2228 foreach my $n ($x, 2) {
2229 $n *= 2; # modifies the $x, but fails on attempt to modify the 2
2232 =item Modification of non-creatable array value attempted, %s
2234 (F) You tried to make an array value spring into existence, and the
2235 subscript was probably negative, even counting from end of the array
2238 =item Modification of non-creatable hash value attempted, %s
2240 (P) You tried to make a hash value spring into existence, and it
2241 couldn't be created for some peculiar reason.
2243 =item Module name must be constant
2245 (F) Only a bare module name is allowed as the first argument to a "use".
2247 =item Module name required with -%c option
2249 (F) The C<-M> or C<-m> options say that Perl should load some module, but
2250 you omitted the name of the module. Consult L<perlrun> for full details
2251 about C<-M> and C<-m>.
2253 =item More than one argument to open
2255 (F) The C<open> function has been asked to open multiple files. This
2256 can happen if you are trying to open a pipe to a command that takes a
2257 list of arguments, but have forgotten to specify a piped open mode.
2258 See L<perlfunc/open> for details.
2260 =item msg%s not implemented
2262 (F) You don't have System V message IPC on your system.
2264 =item Multidimensional syntax %s not supported
2266 (W syntax) Multidimensional arrays aren't written like C<$foo[1,2,3]>.
2267 They're written like C<$foo[1][2][3]>, as in C.
2269 =item '/' must be followed by 'a*', 'A*' or 'Z*'
2271 (F) You had a pack template indicating a counted-length string,
2272 Currently the only things that can have their length counted are a*, A*
2273 or Z*. See L<perlfunc/pack>.
2275 =item '/' must follow a numeric type in unpack
2277 (F) You had an unpack template that contained a '/', but this did not
2278 follow some unpack specification producing a numeric value.
2279 See L<perlfunc/pack>.
2281 =item "my sub" not yet implemented
2283 (F) Lexically scoped subroutines are not yet implemented. Don't try
2286 =item "my" variable %s can't be in a package
2288 (F) Lexically scoped variables aren't in a package, so it doesn't make
2289 sense to try to declare one with a package qualifier on the front. Use
2290 local() if you want to localize a package variable.
2292 =item Name "%s::%s" used only once: possible typo
2294 (W once) Typographical errors often show up as unique variable names.
2295 If you had a good reason for having a unique name, then just mention it
2296 again somehow to suppress the message. The C<our> declaration is
2297 provided for this purpose.
2299 NOTE: This warning detects symbols that have been used only once so $c, @c,
2300 %c, *c, &c, sub c{}, c(), and c (the filehandle or format) are considered
2301 the same; if a program uses $c only once but also uses any of the others it
2302 will not trigger this warning.
2304 =item Negative '/' count in unpack
2306 (F) The length count obtained from a length/code unpack operation was
2307 negative. See L<perlfunc/pack>.
2309 =item Negative length
2311 (F) You tried to do a read/write/send/recv operation with a buffer
2312 length that is less than 0. This is difficult to imagine.
2314 =item Negative offset to vec in lvalue context
2316 (F) When C<vec> is called in an lvalue context, the second argument must be
2317 greater than or equal to zero.
2319 =item Nested quantifiers in regex; marked by <-- HERE in m/%s/
2321 (F) You can't quantify a quantifier without intervening parentheses. So
2322 things like ** or +* or ?* are illegal. The <-- HERE shows in the regular
2323 expression about where the problem was discovered.
2325 Note that the minimal matching quantifiers, C<*?>, C<+?>, and
2326 C<??> appear to be nested quantifiers, but aren't. See L<perlre>.
2328 =item %s never introduced
2330 (S internal) The symbol in question was declared but somehow went out of
2331 scope before it could possibly have been used.
2333 =item No %s allowed while running setuid
2335 (F) Certain operations are deemed to be too insecure for a setuid or
2336 setgid script to even be allowed to attempt. Generally speaking there
2337 will be another way to do what you want that is, if not secure, at least
2338 securable. See L<perlsec>.
2340 =item No comma allowed after %s
2342 (F) A list operator that has a filehandle or "indirect object" is not
2343 allowed to have a comma between that and the following arguments.
2344 Otherwise it'd be just another one of the arguments.
2346 One possible cause for this is that you expected to have imported a
2347 constant to your name space with B<use> or B<import> while no such
2348 importing took place, it may for example be that your operating system
2349 does not support that particular constant. Hopefully you did use an
2350 explicit import list for the constants you expect to see, please see
2351 L<perlfunc/use> and L<perlfunc/import>. While an explicit import list
2352 would probably have caught this error earlier it naturally does not
2353 remedy the fact that your operating system still does not support that
2354 constant. Maybe you have a typo in the constants of the symbol import
2355 list of B<use> or B<import> or in the constant name at the line where
2356 this error was triggered?
2358 =item No command into which to pipe on command line
2360 (F) An error peculiar to VMS. Perl handles its own command line
2361 redirection, and found a '|' at the end of the command line, so it
2362 doesn't know where you want to pipe the output from this command.
2364 =item No DB::DB routine defined
2366 (F) The currently executing code was compiled with the B<-d> switch, but
2367 for some reason the perl5db.pl file (or some facsimile thereof) didn't
2368 define a routine to be called at the beginning of each statement. Which
2369 is odd, because the file should have been required automatically, and
2370 should have blown up the require if it didn't parse right.
2372 =item No dbm on this machine
2374 (P) This is counted as an internal error, because every machine should
2375 supply dbm nowadays, because Perl comes with SDBM. See L<SDBM_File>.
2377 =item No DBsub routine
2379 (F) The currently executing code was compiled with the B<-d> switch,
2380 but for some reason the perl5db.pl file (or some facsimile thereof)
2381 didn't define a DB::sub routine to be called at the beginning of each
2382 ordinary subroutine call.
2384 =item No B<-e> allowed in setuid scripts
2386 (F) A setuid script can't be specified by the user.
2388 =item No error file after 2> or 2>> on command line
2390 (F) An error peculiar to VMS. Perl handles its own command line
2391 redirection, and found a '2>' or a '2>>' on the command line, but can't
2392 find the name of the file to which to write data destined for stderr.
2394 =item No group ending character '%c' found in template
2396 (F) A pack or unpack template has an opening '(' or '[' without its
2397 matching counterpart. See L<perlfunc/pack>.
2399 =item No input file after < on command line
2401 (F) An error peculiar to VMS. Perl handles its own command line
2402 redirection, and found a '<' on the command line, but can't find the
2403 name of the file from which to read data for stdin.
2407 (F) The setuid emulator requires that scripts have a well-formed #! line
2408 even on machines that don't support the #! construct.
2410 =item "no" not allowed in expression
2412 (F) The "no" keyword is recognized and executed at compile time, and
2413 returns no useful value. See L<perlmod>.
2415 =item No output file after > on command line
2417 (F) An error peculiar to VMS. Perl handles its own command line
2418 redirection, and found a lone '>' at the end of the command line, so it
2419 doesn't know where you wanted to redirect stdout.
2421 =item No output file after > or >> on command line
2423 (F) An error peculiar to VMS. Perl handles its own command line
2424 redirection, and found a '>' or a '>>' on the command line, but can't
2425 find the name of the file to which to write data destined for stdout.
2427 =item No package name allowed for variable %s in "our"
2429 (F) Fully qualified variable names are not allowed in "our"
2430 declarations, because that doesn't make much sense under existing
2431 semantics. Such syntax is reserved for future extensions.
2433 =item No Perl script found in input
2435 (F) You called C<perl -x>, but no line was found in the file beginning
2436 with #! and containing the word "perl".
2438 =item No setregid available
2440 (F) Configure didn't find anything resembling the setregid() call for
2443 =item No setreuid available
2445 (F) Configure didn't find anything resembling the setreuid() call for
2448 =item No %s specified for -%c
2450 (F) The indicated command line switch needs a mandatory argument, but
2451 you haven't specified one.
2453 =item No such class field "%s" in variable %s of type %s
2455 (F) You tried to access a key from a hash through the indicated typed variable
2456 but that key is not allowed by the package of the same type. The indicated
2457 package has restricted the set of allowed keys using the L<fields> pragma.
2459 =item No such class %s
2461 (F) You provided a class qualifier in a "my" or "our" declaration, but
2462 this class doesn't exist at this point in your program.
2464 =item No such pipe open
2466 (P) An error peculiar to VMS. The internal routine my_pclose() tried to
2467 close a pipe which hadn't been opened. This should have been caught
2468 earlier as an attempt to close an unopened filehandle.
2470 =item No such signal: SIG%s
2472 (W signal) You specified a signal name as a subscript to %SIG that was
2473 not recognized. Say C<kill -l> in your shell to see the valid signal
2474 names on your system.
2476 =item Not a CODE reference
2478 (F) Perl was trying to evaluate a reference to a code value (that is, a
2479 subroutine), but found a reference to something else instead. You can
2480 use the ref() function to find out what kind of ref it really was. See
2483 =item Not a format reference
2485 (F) I'm not sure how you managed to generate a reference to an anonymous
2486 format, but this indicates you did, and that it didn't exist.
2488 =item Not a GLOB reference
2490 (F) Perl was trying to evaluate a reference to a "typeglob" (that is, a
2491 symbol table entry that looks like C<*foo>), but found a reference to
2492 something else instead. You can use the ref() function to find out what
2493 kind of ref it really was. See L<perlref>.
2495 =item Not a HASH reference
2497 (F) Perl was trying to evaluate a reference to a hash value, but found a
2498 reference to something else instead. You can use the ref() function to
2499 find out what kind of ref it really was. See L<perlref>.
2501 =item Not an ARRAY reference
2503 (F) Perl was trying to evaluate a reference to an array value, but found
2504 a reference to something else instead. You can use the ref() function
2505 to find out what kind of ref it really was. See L<perlref>.
2507 =item Not a perl script
2509 (F) The setuid emulator requires that scripts have a well-formed #! line
2510 even on machines that don't support the #! construct. The line must
2513 =item Not a SCALAR reference
2515 (F) Perl was trying to evaluate a reference to a scalar value, but found
2516 a reference to something else instead. You can use the ref() function
2517 to find out what kind of ref it really was. See L<perlref>.
2519 =item Not a subroutine reference
2521 (F) Perl was trying to evaluate a reference to a code value (that is, a
2522 subroutine), but found a reference to something else instead. You can
2523 use the ref() function to find out what kind of ref it really was. See
2526 =item Not a subroutine reference in overload table
2528 (F) An attempt was made to specify an entry in an overloading table that
2529 doesn't somehow point to a valid subroutine. See L<overload>.
2531 =item Not enough arguments for %s
2533 (F) The function requires more arguments than you specified.
2535 =item Not enough format arguments
2537 (W syntax) A format specified more picture fields than the next line
2538 supplied. See L<perlform>.
2542 (A) You've accidentally run your script through the Bourne shell instead
2543 of Perl. Check the #! line, or manually feed your script into Perl
2546 =item no UTC offset information; assuming local time is UTC
2548 (S) A warning peculiar to VMS. Perl was unable to find the local
2549 timezone offset, so it's assuming that local system time is equivalent
2550 to UTC. If it's not, define the logical name
2551 F<SYS$TIMEZONE_DIFFERENTIAL> to translate to the number of seconds which
2552 need to be added to UTC to get local time.
2554 =item Null filename used
2556 (F) You can't require the null filename, especially because on many
2557 machines that means the current directory! See L<perlfunc/require>.
2559 =item NULL OP IN RUN
2561 (P debugging) Some internal routine called run() with a null opcode
2564 =item Null picture in formline
2566 (F) The first argument to formline must be a valid format picture
2567 specification. It was found to be empty, which probably means you
2568 supplied it an uninitialized value. See L<perlform>.
2572 (P) An attempt was made to realloc NULL.
2574 =item NULL regexp argument
2576 (P) The internal pattern matching routines blew it big time.
2578 =item NULL regexp parameter
2580 (P) The internal pattern matching routines are out of their gourd.
2582 =item Number too long
2584 (F) Perl limits the representation of decimal numbers in programs to
2585 about 250 characters. You've exceeded that length. Future
2586 versions of Perl are likely to eliminate this arbitrary limitation. In
2587 the meantime, try using scientific notation (e.g. "1e6" instead of
2590 =item Octal number in vector unsupported
2592 (F) Numbers with a leading C<0> are not currently allowed in vectors.
2593 The octal number interpretation of such numbers may be supported in a
2596 =item Octal number > 037777777777 non-portable
2598 (W portable) The octal number you specified is larger than 2**32-1
2599 (4294967295) and therefore non-portable between systems. See
2600 L<perlport> for more on portability concerns.
2602 See also L<perlport> for writing portable code.
2604 =item Odd number of arguments for overload::constant
2606 (W overload) The call to overload::constant contained an odd number of
2607 arguments. The arguments should come in pairs.
2609 =item Odd number of elements in anonymous hash
2611 (W misc) You specified an odd number of elements to initialize a hash,
2612 which is odd, because hashes come in key/value pairs.
2614 =item Odd number of elements in hash assignment
2616 (W misc) You specified an odd number of elements to initialize a hash,
2617 which is odd, because hashes come in key/value pairs.
2619 =item Offset outside string
2621 (F) You tried to do a read/write/send/recv operation with an offset
2622 pointing outside the buffer. This is difficult to imagine. The sole
2623 exception to this is that C<sysread()>ing past the buffer will extend
2624 the buffer and zero pad the new area.
2626 =item %s() on unopened %s
2628 (W unopened) An I/O operation was attempted on a filehandle that was
2629 never initialized. You need to do an open(), a sysopen(), or a socket()
2630 call, or call a constructor from the FileHandle package.
2632 =item -%s on unopened filehandle %s
2634 (W unopened) You tried to invoke a file test operator on a filehandle
2635 that isn't open. Check your control flow. See also L<perlfunc/-X>.
2639 (S internal) An internal warning that the grammar is screwed up.
2643 (S internal) An internal warning that the grammar is screwed up.
2645 =item Operation `%s': no method found, %s
2647 (F) An attempt was made to perform an overloaded operation for which no
2648 handler was defined. While some handlers can be autogenerated in terms
2649 of other handlers, there is no default handler for any operation, unless
2650 C<fallback> overloading key is specified to be true. See L<overload>.
2652 =item Operator or semicolon missing before %s
2654 (S ambiguous) You used a variable or subroutine call where the parser
2655 was expecting an operator. The parser has assumed you really meant to
2656 use an operator, but this is highly likely to be incorrect. For
2657 example, if you say "*foo *foo" it will be interpreted as if you said
2660 =item "our" variable %s redeclared
2662 (W misc) You seem to have already declared the same global once before
2663 in the current lexical scope.
2665 =item Out of memory!
2667 (X) The malloc() function returned 0, indicating there was insufficient
2668 remaining memory (or virtual memory) to satisfy the request. Perl has
2669 no option but to exit immediately.
2671 At least in Unix you may be able to get past this by increasing your
2672 process datasize limits: in csh/tcsh use C<limit> and
2673 C<limit datasize n> (where C<n> is the number of kilobytes) to check
2674 the current limits and change them, and in ksh/bash/zsh use C<ulimit -a>
2675 and C<ulimit -d n>, respectively.
2677 =item Out of memory during %s extend
2679 (X) An attempt was made to extend an array, a list, or a string beyond
2680 the largest possible memory allocation.
2682 =item Out of memory during "large" request for %s
2684 (F) The malloc() function returned 0, indicating there was insufficient
2685 remaining memory (or virtual memory) to satisfy the request. However,
2686 the request was judged large enough (compile-time default is 64K), so a
2687 possibility to shut down by trapping this error is granted.
2689 =item Out of memory during request for %s
2691 (X|F) The malloc() function returned 0, indicating there was
2692 insufficient remaining memory (or virtual memory) to satisfy the
2695 The request was judged to be small, so the possibility to trap it
2696 depends on the way perl was compiled. By default it is not trappable.
2697 However, if compiled for this, Perl may use the contents of C<$^M> as an
2698 emergency pool after die()ing with this message. In this case the error
2699 is trappable I<once>, and the error message will include the line and file
2700 where the failed request happened.
2702 =item Out of memory during ridiculously large request
2704 (F) You can't allocate more than 2^31+"small amount" bytes. This error
2705 is most likely to be caused by a typo in the Perl program. e.g.,
2706 C<$arr[time]> instead of C<$arr[$time]>.
2708 =item Out of memory for yacc stack
2710 (F) The yacc parser wanted to grow its stack so it could continue
2711 parsing, but realloc() wouldn't give it more memory, virtual or
2714 =item '@' outside of string in unpack
2716 (F) You had a template that specified an absolute position outside
2717 the string being unpacked. See L<perlfunc/pack>.
2719 =item %s package attribute may clash with future reserved word: %s
2721 (W reserved) A lowercase attribute name was used that had a
2722 package-specific handler. That name might have a meaning to Perl itself
2723 some day, even though it doesn't yet. Perhaps you should use a
2724 mixed-case attribute name, instead. See L<attributes>.
2726 =item pack/unpack repeat count overflow
2728 (F) You can't specify a repeat count so large that it overflows your
2729 signed integers. See L<perlfunc/pack>.
2733 (W io) A single call to write() produced more lines than can fit on a
2734 page. See L<perlform>.
2738 (P) An internal error.
2740 =item panic: ck_grep
2742 (P) Failed an internal consistency check trying to compile a grep.
2744 =item panic: ck_split
2746 (P) Failed an internal consistency check trying to compile a split.
2748 =item panic: corrupt saved stack index
2750 (P) The savestack was requested to restore more localized values than
2751 there are in the savestack.
2753 =item panic: del_backref
2755 (P) Failed an internal consistency check while trying to reset a weak
2758 =item panic: Devel::DProf inconsistent subroutine return
2760 (P) Devel::DProf called a subroutine that exited using goto(LABEL),
2761 last(LABEL) or next(LABEL). Leaving that way a subroutine called from
2762 an XSUB will lead very probably to a crash of the interpreter. This is
2763 a bug that will hopefully one day get fixed.
2767 (P) We popped the context stack to an eval context, and then discovered
2768 it wasn't an eval context.
2770 =item panic: do_subst
2772 (P) The internal pp_subst() routine was called with invalid operational
2775 =item panic: do_trans_%s
2777 (P) The internal do_trans routines were called with invalid operational
2782 (P) The library function frexp() failed, making printf("%f") impossible.
2786 (P) We popped the context stack to a context with the specified label,
2787 and then discovered it wasn't a context we know how to do a goto in.
2789 =item panic: INTERPCASEMOD
2791 (P) The lexer got into a bad state at a case modifier.
2793 =item panic: INTERPCONCAT
2795 (P) The lexer got into a bad state parsing a string with brackets.
2797 =item panic: kid popen errno read
2799 (F) forked child returned an incomprehensible message about its errno.
2803 (P) We popped the context stack to a block context, and then discovered
2804 it wasn't a block context.
2806 =item panic: leave_scope clearsv
2808 (P) A writable lexical variable became read-only somehow within the
2811 =item panic: leave_scope inconsistency
2813 (P) The savestack probably got out of sync. At least, there was an
2814 invalid enum on the top of it.
2816 =item panic: magic_killbackrefs
2818 (P) Failed an internal consistency check while trying to reset all weak
2819 references to an object.
2823 (P) Something requested a negative number of bytes of malloc.
2825 =item panic: mapstart
2827 (P) The compiler is screwed up with respect to the map() function.
2829 =item panic: memory wrap
2831 (P) Something tried to allocate more memory than possible.
2833 =item panic: null array
2835 (P) One of the internal array routines was passed a null AV pointer.
2837 =item panic: pad_alloc
2839 (P) The compiler got confused about which scratch pad it was allocating
2840 and freeing temporaries and lexicals from.
2842 =item panic: pad_free curpad
2844 (P) The compiler got confused about which scratch pad it was allocating
2845 and freeing temporaries and lexicals from.
2847 =item panic: pad_free po
2849 (P) An invalid scratch pad offset was detected internally.
2851 =item panic: pad_reset curpad
2853 (P) The compiler got confused about which scratch pad it was allocating
2854 and freeing temporaries and lexicals from.
2856 =item panic: pad_sv po
2858 (P) An invalid scratch pad offset was detected internally.
2860 =item panic: pad_swipe curpad
2862 (P) The compiler got confused about which scratch pad it was allocating
2863 and freeing temporaries and lexicals from.
2865 =item panic: pad_swipe po
2867 (P) An invalid scratch pad offset was detected internally.
2869 =item panic: pp_iter
2871 (P) The foreach iterator got called in a non-loop context frame.
2873 =item panic: pp_match%s
2875 (P) The internal pp_match() routine was called with invalid operational
2878 =item panic: pp_split
2880 (P) Something terrible went wrong in setting up for the split.
2882 =item panic: realloc
2884 (P) Something requested a negative number of bytes of realloc.
2886 =item panic: restartop
2888 (P) Some internal routine requested a goto (or something like it), and
2889 didn't supply the destination.
2893 (P) We popped the context stack to a subroutine or eval context, and
2894 then discovered it wasn't a subroutine or eval context.
2896 =item panic: scan_num
2898 (P) scan_num() got called on something that wasn't a number.
2900 =item panic: sv_insert
2902 (P) The sv_insert() routine was told to remove more string than there
2905 =item panic: top_env
2907 (P) The compiler attempted to do a goto, or something weird like that.
2909 =item panic: utf16_to_utf8: odd bytelen
2911 (P) Something tried to call utf16_to_utf8 with an odd (as opposed
2912 to even) byte length.
2916 (P) The lexer got into a bad state while processing a case modifier.
2918 =item Parentheses missing around "%s" list
2920 (W parenthesis) You said something like
2926 my ($foo, $bar) = @_;
2928 Remember that "my", "our", and "local" bind tighter than comma.
2930 =item C<-p> destination: %s
2932 (F) An error occurred during the implicit output invoked by the C<-p>
2933 command-line switch. (This output goes to STDOUT unless you've
2934 redirected it with select().)
2936 =item (perhaps you forgot to load "%s"?)
2938 (F) This is an educated guess made in conjunction with the message
2939 "Can't locate object method \"%s\" via package \"%s\"". It often means
2940 that a method requires a package that has not been loaded.
2942 =item Perl_my_%s() not available
2944 (F) Your platform has very uncommon byte-order and integer size,
2945 so it was not possible to set up some or all fixed-width byte-order
2946 conversion functions. This is only a problem when you're using the
2947 '<' or '>' modifiers in (un)pack templates. See L<perlfunc/pack>.
2949 =item Perl %s required--this is only version %s, stopped
2951 (F) The module in question uses features of a version of Perl more
2952 recent than the currently running version. How long has it been since
2953 you upgraded, anyway? See L<perlfunc/require>.
2955 =item PERL_SH_DIR too long
2957 (F) An error peculiar to OS/2. PERL_SH_DIR is the directory to find the
2958 C<sh>-shell in. See "PERL_SH_DIR" in L<perlos2>.
2960 =item PERL_SIGNALS illegal: "%s"
2962 See L<perlrun/PERL_SIGNALS> for legal values.
2964 =item perl: warning: Setting locale failed.
2966 (S) The whole warning message will look something like:
2968 perl: warning: Setting locale failed.
2969 perl: warning: Please check that your locale settings:
2972 are supported and installed on your system.
2973 perl: warning: Falling back to the standard locale ("C").
2975 Exactly what were the failed locale settings varies. In the above the
2976 settings were that the LC_ALL was "En_US" and the LANG had no value.
2977 This error means that Perl detected that you and/or your operating
2978 system supplier and/or system administrator have set up the so-called
2979 locale system but Perl could not use those settings. This was not
2980 dead serious, fortunately: there is a "default locale" called "C" that
2981 Perl can and will use, the script will be run. Before you really fix
2982 the problem, however, you will get the same error message each time
2983 you run Perl. How to really fix the problem can be found in
2984 L<perllocale> section B<LOCALE PROBLEMS>.
2986 =item Permission denied
2988 (F) The setuid emulator in suidperl decided you were up to no good.
2990 =item pid %x not a child
2992 (W exec) A warning peculiar to VMS. Waitpid() was asked to wait for a
2993 process which isn't a subprocess of the current process. While this is
2994 fine from VMS' perspective, it's probably not what you intended.
2996 =item 'P' must have an explicit size in unpack
2998 (F) The unpack format P must have an explicit size, not "*".
3000 =item B<-P> not allowed for setuid/setgid script
3002 (F) The script would have to be opened by the C preprocessor by name,
3003 which provides a race condition that breaks security.
3005 =item POSIX class [:%s:] unknown in regex; marked by <-- HERE in m/%s/
3007 (F) The class in the character class [: :] syntax is unknown. The <-- HERE
3008 shows in the regular expression about where the problem was discovered.
3009 Note that the POSIX character classes do B<not> have the C<is> prefix
3010 the corresponding C interfaces have: in other words, it's C<[[:print:]]>,
3011 not C<isprint>. See L<perlre>.
3013 =item POSIX getpgrp can't take an argument
3015 (F) Your system has POSIX getpgrp(), which takes no argument, unlike
3016 the BSD version, which takes a pid.
3018 =item POSIX syntax [%s] belongs inside character classes in regex; marked by <-- HERE in m/%s/
3020 (W regexp) The character class constructs [: :], [= =], and [. .] go
3021 I<inside> character classes, the [] are part of the construct, for example:
3022 /[012[:alpha:]345]/. Note that [= =] and [. .] are not currently
3023 implemented; they are simply placeholders for future extensions and will
3024 cause fatal errors. The <-- HERE shows in the regular expression about
3025 where the problem was discovered. See L<perlre>.
3027 =item POSIX syntax [. .] is reserved for future extensions in regex; marked by <-- HERE in m/%s/
3029 (F regexp) Within regular expression character classes ([]) the syntax
3030 beginning with "[." and ending with ".]" is reserved for future extensions.
3031 If you need to represent those character sequences inside a regular
3032 expression character class, just quote the square brackets with the
3033 backslash: "\[." and ".\]". The <-- HERE shows in the regular expression
3034 about where the problem was discovered. See L<perlre>.
3036 =item POSIX syntax [= =] is reserved for future extensions in regex; marked by <-- HERE in m/%s/
3038 (F) Within regular expression character classes ([]) the syntax beginning
3039 with "[=" and ending with "=]" is reserved for future extensions. If you
3040 need to represent those character sequences inside a regular expression
3041 character class, just quote the square brackets with the backslash: "\[="
3042 and "=\]". The <-- HERE shows in the regular expression about where the
3043 problem was discovered. See L<perlre>.
3045 =item Possible attempt to put comments in qw() list
3047 (W qw) qw() lists contain items separated by whitespace; as with literal
3048 strings, comment characters are not ignored, but are instead treated as
3049 literal data. (You may have used different delimiters than the
3050 parentheses shown here; braces are also frequently used.)
3052 You probably wrote something like this:
3059 when you should have written this:
3066 If you really want comments, build your list the
3067 old-fashioned way, with quotes and commas:
3071 'b', # another comment
3074 =item Possible attempt to separate words with commas
3076 (W qw) qw() lists contain items separated by whitespace; therefore
3077 commas aren't needed to separate the items. (You may have used
3078 different delimiters than the parentheses shown here; braces are also
3081 You probably wrote something like this:
3085 which puts literal commas into some of the list items. Write it without
3086 commas if you don't want them to appear in your data:
3090 =item Possible memory corruption: %s overflowed 3rd argument
3092 (F) An ioctl() or fcntl() returned more than Perl was bargaining for.
3093 Perl guesses a reasonable buffer size, but puts a sentinel byte at the
3094 end of the buffer just in case. This sentinel byte got clobbered, and
3095 Perl assumes that memory is now corrupted. See L<perlfunc/ioctl>.
3097 =item Possible precedence problem on bitwise %c operator
3099 (W precedence) Your program uses a bitwise logical operator in conjunction
3100 with a numeric comparison operator, like this :
3102 if ($x & $y == 0) { ... }
3104 This expression is actually equivalent to C<$x & ($y == 0)>, due to the
3105 higher precedence of C<==>. This is probably not what you want. (If you
3106 really meant to write this, disable the warning, or, better, put the
3107 parentheses explicitly and write C<$x & ($y == 0)>).
3109 =item Possible unintended interpolation of %s in string
3111 (W ambiguous) You said something like `@foo' in a double-quoted string
3112 but there was no array C<@foo> in scope at the time. If you wanted a
3113 literal @foo, then write it as \@foo; otherwise find out what happened
3114 to the array you apparently lost track of.
3116 =item Possible Y2K bug: %s
3118 (W y2k) You are concatenating the number 19 with another number, which
3119 could be a potential Year 2000 problem.
3121 =item pragma "attrs" is deprecated, use "sub NAME : ATTRS" instead
3123 (D deprecated) You have written something like this:
3127 use attrs qw(locked);
3130 You should use the new declaration syntax instead.
3136 The C<use attrs> pragma is now obsolete, and is only provided for
3137 backward-compatibility. See L<perlsub/"Subroutine Attributes">.
3139 =item Precedence problem: open %s should be open(%s)
3141 (S precedence) The old irregular construct
3145 is now misinterpreted as
3149 because of the strict regularization of Perl 5's grammar into unary and
3150 list operators. (The old open was a little of both.) You must put
3151 parentheses around the filehandle, or use the new "or" operator instead
3154 =item Premature end of script headers
3158 =item printf() on closed filehandle %s
3160 (W closed) The filehandle you're writing to got itself closed sometime
3161 before now. Check your control flow.
3163 =item print() on closed filehandle %s
3165 (W closed) The filehandle you're printing on got itself closed sometime
3166 before now. Check your control flow.
3168 =item Process terminated by SIG%s
3170 (W) This is a standard message issued by OS/2 applications, while *nix
3171 applications die in silence. It is considered a feature of the OS/2
3172 port. One can easily disable this by appropriate sighandlers, see
3173 L<perlipc/"Signals">. See also "Process terminated by SIGTERM/SIGINT"
3176 =item Prototype mismatch: %s vs %s
3178 (S prototype) The subroutine being declared or defined had previously been
3179 declared or defined with a different function prototype.
3181 =item Prototype not terminated
3183 (F) You've omitted the closing parenthesis in a function prototype
3186 =item Quantifier follows nothing in regex; marked by <-- HERE in m/%s/
3188 (F) You started a regular expression with a quantifier. Backslash it if you
3189 meant it literally. The <-- HERE shows in the regular expression about
3190 where the problem was discovered. See L<perlre>.
3192 =item Quantifier in {,} bigger than %d in regex; marked by <-- HERE in m/%s/
3194 (F) There is currently a limit to the size of the min and max values of the
3195 {min,max} construct. The <-- HERE shows in the regular expression about where
3196 the problem was discovered. See L<perlre>.
3198 =item Quantifier unexpected on zero-length expression; marked by <-- HERE in m/%s/
3200 (W regexp) You applied a regular expression quantifier in a place where
3201 it makes no sense, such as on a zero-width assertion. Try putting the
3202 quantifier inside the assertion instead. For example, the way to match
3203 "abc" provided that it is followed by three repetitions of "xyz" is
3204 C</abc(?=(?:xyz){3})/>, not C</abc(?=xyz){3}/>.
3206 The <-- HERE shows in the regular expression about where the problem was
3209 =item Range iterator outside integer range
3211 (F) One (or both) of the numeric arguments to the range operator ".."
3212 are outside the range which can be represented by integers internally.
3213 One possible workaround is to force Perl to use magical string increment
3214 by prepending "0" to your numbers.
3216 =item readline() on closed filehandle %s
3218 (W closed) The filehandle you're reading from got itself closed sometime
3219 before now. Check your control flow.
3221 =item read() on closed filehandle %s
3223 (W closed) You tried to read from a closed filehandle.
3225 =item read() on unopened filehandle %s
3227 (W unopened) You tried to read from a filehandle that was never opened.
3229 =item Reallocation too large: %lx
3231 (F) You can't allocate more than 64K on an MS-DOS machine.
3233 =item realloc() of freed memory ignored
3235 (S malloc) An internal routine called realloc() on something that had
3238 =item Recompile perl with B<-D>DEBUGGING to use B<-D> switch
3240 (F debugging) You can't use the B<-D> option unless the code to produce
3241 the desired output is compiled into Perl, which entails some overhead,
3242 which is why it's currently left out of your copy.
3244 =item Recursive inheritance detected in package '%s'
3246 (F) More than 100 levels of inheritance were used. Probably indicates
3247 an unintended loop in your inheritance hierarchy.
3249 =item Recursive inheritance detected while looking for method %s
3251 (F) More than 100 levels of inheritance were encountered while invoking
3252 a method. Probably indicates an unintended loop in your inheritance
3255 =item Reference found where even-sized list expected
3257 (W misc) You gave a single reference where Perl was expecting a list
3258 with an even number of elements (for assignment to a hash). This usually
3259 means that you used the anon hash constructor when you meant to use
3260 parens. In any case, a hash requires key/value B<pairs>.
3262 %hash = { one => 1, two => 2, }; # WRONG
3263 %hash = [ qw/ an anon array / ]; # WRONG
3264 %hash = ( one => 1, two => 2, ); # right
3265 %hash = qw( one 1 two 2 ); # also fine
3267 =item Reference is already weak
3269 (W misc) You have attempted to weaken a reference that is already weak.
3270 Doing so has no effect.
3272 =item Reference miscount in sv_replace()
3274 (W internal) The internal sv_replace() function was handed a new SV with
3275 a reference count of other than 1.
3277 =item Reference to nonexistent group in regex; marked by <-- HERE in m/%s/
3279 (F) You used something like C<\7> in your regular expression, but there are
3280 not at least seven sets of capturing parentheses in the expression. If you
3281 wanted to have the character with value 7 inserted into the regular expression,
3282 prepend a zero to make the number at least two digits: C<\07>
3284 The <-- HERE shows in the regular expression about where the problem was
3287 =item regexp memory corruption
3289 (P) The regular expression engine got confused by what the regular
3290 expression compiler gave it.
3292 =item Regexp out of space
3294 (P) A "can't happen" error, because safemalloc() should have caught it
3297 =item Repeated format line will never terminate (~~ and @# incompatible)
3299 (F) Your format containes the ~~ repeat-until-blank sequence and a
3300 numeric field that will never go blank so that the repetition never
3301 terminates. You might use ^# instead. See L<perlform>.
3303 =item Reversed %s= operator
3305 (W syntax) You wrote your assignment operator backwards. The = must
3306 always comes last, to avoid ambiguity with subsequent unary operators.
3308 =item Runaway format
3310 (F) Your format contained the ~~ repeat-until-blank sequence, but it
3311 produced 200 lines at once, and the 200th line looked exactly like the
3312 199th line. Apparently you didn't arrange for the arguments to exhaust
3313 themselves, either by using ^ instead of @ (for scalar variables), or by
3314 shifting or popping (for array variables). See L<perlform>.
3316 =item Scalars leaked: %d
3318 (P) Something went wrong in Perl's internal bookkeeping of scalars:
3319 not all scalar variables were deallocated by the time Perl exited.
3320 What this usually indicates is a memory leak, which is of course bad,
3321 especially if the Perl program is intended to be long-running.
3323 =item Scalar value @%s[%s] better written as $%s[%s]
3325 (W syntax) You've used an array slice (indicated by @) to select a
3326 single element of an array. Generally it's better to ask for a scalar
3327 value (indicated by $). The difference is that C<$foo[&bar]> always
3328 behaves like a scalar, both when assigning to it and when evaluating its
3329 argument, while C<@foo[&bar]> behaves like a list when you assign to it,
3330 and provides a list context to its subscript, which can do weird things
3331 if you're expecting only one subscript.
3333 On the other hand, if you were actually hoping to treat the array
3334 element as a list, you need to look into how references work, because
3335 Perl will not magically convert between scalars and lists for you. See
3338 =item Scalar value @%s{%s} better written as $%s{%s}
3340 (W syntax) You've used a hash slice (indicated by @) to select a single
3341 element of a hash. Generally it's better to ask for a scalar value
3342 (indicated by $). The difference is that C<$foo{&bar}> always behaves
3343 like a scalar, both when assigning to it and when evaluating its
3344 argument, while C<@foo{&bar}> behaves like a list when you assign to it,
3345 and provides a list context to its subscript, which can do weird things
3346 if you're expecting only one subscript.
3348 On the other hand, if you were actually hoping to treat the hash element
3349 as a list, you need to look into how references work, because Perl will
3350 not magically convert between scalars and lists for you. See
3353 =item Script is not setuid/setgid in suidperl
3355 (F) Oddly, the suidperl program was invoked on a script without a setuid
3356 or setgid bit set. This doesn't make much sense.
3358 =item Search pattern not terminated
3360 (F) The lexer couldn't find the final delimiter of a // or m{}
3361 construct. Remember that bracketing delimiters count nesting level.
3362 Missing the leading C<$> from a variable C<$m> may cause this error.
3364 Note that since Perl 5.9.0 a // can also be the I<defined-or>
3365 construct, not just the empty search pattern. Therefore code written
3366 in Perl 5.9.0 or later that uses the // as the I<defined-or> can be
3367 misparsed by pre-5.9.0 Perls as a non-terminated search pattern.
3369 =item %sseek() on unopened filehandle
3371 (W unopened) You tried to use the seek() or sysseek() function on a
3372 filehandle that was either never opened or has since been closed.
3374 =item select not implemented
3376 (F) This machine doesn't implement the select() system call.
3378 =item Self-ties of arrays and hashes are not supported
3380 (F) Self-ties are of arrays and hashes are not supported in
3381 the current implementation.
3383 =item Semicolon seems to be missing
3385 (W semicolon) A nearby syntax error was probably caused by a missing
3386 semicolon, or possibly some other missing operator, such as a comma.
3388 =item semi-panic: attempt to dup freed string
3390 (S internal) The internal newSVsv() routine was called to duplicate a
3391 scalar that had previously been marked as free.
3393 =item sem%s not implemented
3395 (F) You don't have System V semaphore IPC on your system.
3397 =item send() on closed socket %s
3399 (W closed) The socket you're sending to got itself closed sometime
3400 before now. Check your control flow.
3402 =item Sequence (? incomplete in regex; marked by <-- HERE in m/%s/
3404 (F) A regular expression ended with an incomplete extension (?. The <-- HERE
3405 shows in the regular expression about where the problem was discovered. See
3408 =item Sequence (?%s...) not implemented in regex; marked by <-- HERE in m/%s/
3410 (F) A proposed regular expression extension has the character reserved but
3411 has not yet been written. The <-- HERE shows in the regular expression about
3412 where the problem was discovered. See L<perlre>.
3414 =item Sequence (?%s...) not recognized in regex; marked by <-- HERE in m/%s/
3416 (F) You used a regular expression extension that doesn't make sense. The
3417 <-- HERE shows in the regular expression about where the problem was
3418 discovered. See L<perlre>.
3420 =item Sequence (?#... not terminated in regex; marked by <-- HERE in m/%s/
3422 (F) A regular expression comment must be terminated by a closing
3423 parenthesis. Embedded parentheses aren't allowed. The <-- HERE shows in
3424 the regular expression about where the problem was discovered. See
3427 =item Sequence (?{...}) not terminated or not {}-balanced in regex; marked by <-- HERE in m/%s/
3429 (F) If the contents of a (?{...}) clause contains braces, they must balance
3430 for Perl to properly detect the end of the clause. The <-- HERE shows in
3431 the regular expression about where the problem was discovered. See
3434 =item 500 Server error
3440 This is the error message generally seen in a browser window when trying
3441 to run a CGI program (including SSI) over the web. The actual error text
3442 varies widely from server to server. The most frequently-seen variants
3443 are "500 Server error", "Method (something) not permitted", "Document
3444 contains no data", "Premature end of script headers", and "Did not
3445 produce a valid header".
3447 B<This is a CGI error, not a Perl error>.
3449 You need to make sure your script is executable, is accessible by the
3450 user CGI is running the script under (which is probably not the user
3451 account you tested it under), does not rely on any environment variables
3452 (like PATH) from the user it isn't running under, and isn't in a
3453 location where the CGI server can't find it, basically, more or less.
3454 Please see the following for more information:
3456 http://www.perl.org/CGI_MetaFAQ.html
3457 http://www.htmlhelp.org/faq/cgifaq.html
3458 http://www.w3.org/Security/Faq/
3460 You should also look at L<perlfaq9>.
3462 =item setegid() not implemented
3464 (F) You tried to assign to C<$)>, and your operating system doesn't
3465 support the setegid() system call (or equivalent), or at least Configure
3468 =item seteuid() not implemented
3470 (F) You tried to assign to C<< $> >>, and your operating system doesn't
3471 support the seteuid() system call (or equivalent), or at least Configure
3474 =item setpgrp can't take arguments
3476 (F) Your system has the setpgrp() from BSD 4.2, which takes no
3477 arguments, unlike POSIX setpgid(), which takes a process ID and process
3480 =item setrgid() not implemented
3482 (F) You tried to assign to C<$(>, and your operating system doesn't
3483 support the setrgid() system call (or equivalent), or at least Configure
3486 =item setruid() not implemented
3488 (F) You tried to assign to C<$<>, and your operating system doesn't
3489 support the setruid() system call (or equivalent), or at least Configure
3492 =item setsockopt() on closed socket %s
3494 (W closed) You tried to set a socket option on a closed socket. Did you
3495 forget to check the return value of your socket() call? See
3496 L<perlfunc/setsockopt>.
3498 =item Setuid/gid script is writable by world
3500 (F) The setuid emulator won't run a script that is writable by the
3501 world, because the world might have written on it already.
3503 =item shm%s not implemented
3505 (F) You don't have System V shared memory IPC on your system.
3507 =item !=~ should be !~
3509 (W syntax) The non-matching operator is !~, not !=~. !=~ will be
3510 interpreted as the != (numeric not equal) and ~ (1's complement)
3511 operators: probably not what you intended.
3513 =item <> should be quotes
3515 (F) You wrote C<< require <file> >> when you should have written
3518 =item /%s/ should probably be written as "%s"
3520 (W syntax) You have used a pattern where Perl expected to find a string,
3521 as in the first argument to C<join>. Perl will treat the true or false
3522 result of matching the pattern against $_ as the string, which is
3523 probably not what you had in mind.
3525 =item shutdown() on closed socket %s
3527 (W closed) You tried to do a shutdown on a closed socket. Seems a bit
3530 =item SIG%s handler "%s" not defined
3532 (W signal) The signal handler named in %SIG doesn't, in fact, exist.
3533 Perhaps you put it into the wrong package?
3535 =item sort is now a reserved word
3537 (F) An ancient error message that almost nobody ever runs into anymore.
3538 But before sort was a keyword, people sometimes used it as a filehandle.
3540 =item Sort subroutine didn't return a numeric value
3542 (F) A sort comparison routine must return a number. You probably blew
3543 it by not using C<< <=> >> or C<cmp>, or by not using them correctly.
3544 See L<perlfunc/sort>.
3546 =item Sort subroutine didn't return single value
3548 (F) A sort comparison subroutine may not return a list value with more
3549 or less than one element. See L<perlfunc/sort>.
3551 =item splice() offset past end of array
3553 (W misc) You attempted to specify an offset that was past the end of
3554 the array passed to splice(). Splicing will instead commence at the end
3555 of the array, rather than past it. If this isn't what you want, try
3556 explicitly pre-extending the array by assigning $#array = $offset. See
3561 (P) The split was looping infinitely. (Obviously, a split shouldn't
3562 iterate more times than there are characters of input, which is what
3563 happened.) See L<perlfunc/split>.
3565 =item Statement unlikely to be reached
3567 (W exec) You did an exec() with some statement after it other than a
3568 die(). This is almost always an error, because exec() never returns
3569 unless there was a failure. You probably wanted to use system()
3570 instead, which does return. To suppress this warning, put the exec() in
3573 =item stat() on unopened filehandle %s
3575 (W unopened) You tried to use the stat() function on a filehandle that
3576 was either never opened or has since been closed.
3578 =item Stub found while resolving method `%s' overloading %s
3580 (P) Overloading resolution over @ISA tree may be broken by importation
3581 stubs. Stubs should never be implicitly created, but explicit calls to
3582 C<can> may break this.
3584 =item Subroutine %s redefined
3586 (W redefine) You redefined a subroutine. To suppress this warning, say
3589 no warnings 'redefine';
3590 eval "sub name { ... }";
3593 =item Substitution loop
3595 (P) The substitution was looping infinitely. (Obviously, a substitution
3596 shouldn't iterate more times than there are characters of input, which
3597 is what happened.) See the discussion of substitution in
3598 L<perlop/"Quote and Quote-like Operators">.
3600 =item Substitution pattern not terminated
3602 (F) The lexer couldn't find the interior delimiter of an s/// or s{}{}
3603 construct. Remember that bracketing delimiters count nesting level.
3604 Missing the leading C<$> from variable C<$s> may cause this error.
3606 =item Substitution replacement not terminated
3608 (F) The lexer couldn't find the final delimiter of an s/// or s{}{}
3609 construct. Remember that bracketing delimiters count nesting level.
3610 Missing the leading C<$> from variable C<$s> may cause this error.
3612 =item substr outside of string
3614 (W substr),(F) You tried to reference a substr() that pointed outside of
3615 a string. That is, the absolute value of the offset was larger than the
3616 length of the string. See L<perlfunc/substr>. This warning is fatal if
3617 substr is used in an lvalue context (as the left hand side of an
3618 assignment or as a subroutine argument for example).
3620 =item suidperl is no longer needed since %s
3622 (F) Your Perl was compiled with B<-D>SETUID_SCRIPTS_ARE_SECURE_NOW, but
3623 a version of the setuid emulator somehow got run anyway.
3625 =item Switch (?(condition)... contains too many branches in regex; marked by <-- HERE in m/%s/
3627 (F) A (?(condition)if-clause|else-clause) construct can have at most two
3628 branches (the if-clause and the else-clause). If you want one or both to
3629 contain alternation, such as using C<this|that|other>, enclose it in
3630 clustering parentheses:
3632 (?(condition)(?:this|that|other)|else-clause)
3634 The <-- HERE shows in the regular expression about where the problem was
3635 discovered. See L<perlre>.
3637 =item Switch condition not recognized in regex; marked by <-- HERE in m/%s/
3639 (F) If the argument to the (?(...)if-clause|else-clause) construct is a
3640 number, it can be only a number. The <-- HERE shows in the regular expression
3641 about where the problem was discovered. See L<perlre>.
3643 =item switching effective %s is not implemented
3645 (F) While under the C<use filetest> pragma, we cannot switch the real
3646 and effective uids or gids.
3650 (F) The final summary message when a C<perl -c> succeeds.
3654 (F) Probably means you had a syntax error. Common reasons include:
3656 A keyword is misspelled.
3657 A semicolon is missing.
3659 An opening or closing parenthesis is missing.
3660 An opening or closing brace is missing.
3661 A closing quote is missing.
3663 Often there will be another error message associated with the syntax
3664 error giving more information. (Sometimes it helps to turn on B<-w>.)
3665 The error message itself often tells you where it was in the line when
3666 it decided to give up. Sometimes the actual error is several tokens
3667 before this, because Perl is good at understanding random input.
3668 Occasionally the line number may be misleading, and once in a blue moon
3669 the only way to figure out what's triggering the error is to call
3670 C<perl -c> repeatedly, chopping away half the program each time to see
3671 if the error went away. Sort of the cybernetic version of S<20
3674 =item syntax error at line %d: `%s' unexpected
3676 (A) You've accidentally run your script through the Bourne shell instead
3677 of Perl. Check the #! line, or manually feed your script into Perl
3680 =item syntax error in file %s at line %d, next 2 tokens "%s"
3682 (F) This error is likely to occur if you run a perl5 script through
3683 a perl4 interpreter, especially if the next 2 tokens are "use strict"
3684 or "my $var" or "our $var".
3686 =item sysread() on closed filehandle %s
3688 (W closed) You tried to read from a closed filehandle.
3690 =item sysread() on unopened filehandle %s
3692 (W unopened) You tried to read from a filehandle that was never opened.
3694 =item System V %s is not implemented on this machine
3696 (F) You tried to do something with a function beginning with "sem",
3697 "shm", or "msg" but that System V IPC is not implemented in your
3698 machine. In some machines the functionality can exist but be
3699 unconfigured. Consult your system support.
3701 =item syswrite() on closed filehandle %s
3703 (W closed) The filehandle you're writing to got itself closed sometime
3704 before now. Check your control flow.
3706 =item C<-T> and C<-B> not implemented on filehandles
3708 (F) Perl can't peek at the stdio buffer of filehandles when it doesn't
3709 know about your kind of stdio. You'll have to use a filename instead.
3711 =item Target of goto is too deeply nested
3713 (F) You tried to use C<goto> to reach a label that was too deeply nested
3714 for Perl to reach. Perl is doing you a favor by refusing.
3716 =item tell() on unopened filehandle
3718 (W unopened) You tried to use the tell() function on a filehandle that
3719 was either never opened or has since been closed.
3721 =item That use of $[ is unsupported
3723 (F) Assignment to C<$[> is now strictly circumscribed, and interpreted
3724 as a compiler directive. You may say only one of
3733 This is to prevent the problem of one module changing the array base out
3734 from under another module inadvertently. See L<perlvar/$[>.
3736 =item The crypt() function is unimplemented due to excessive paranoia
3738 (F) Configure couldn't find the crypt() function on your machine,
3739 probably because your vendor didn't supply it, probably because they
3740 think the U.S. Government thinks it's a secret, or at least that they
3741 will continue to pretend that it is. And if you quote me on that, I
3744 =item The %s function is unimplemented
3746 The function indicated isn't implemented on this architecture, according
3747 to the probings of Configure.
3749 =item The stat preceding %s wasn't an lstat
3751 (F) It makes no sense to test the current stat buffer for symbolic
3752 linkhood if the last stat that wrote to the stat buffer already went
3753 past the symlink to get to the real file. Use an actual filename
3756 =item The 'unique' attribute may only be applied to 'our' variables
3758 (F) Currently this attribute is not supported on C<my> or C<sub>
3759 declarations. See L<perlfunc/our>.
3761 =item This Perl can't reset CRTL environ elements (%s)
3763 =item This Perl can't set CRTL environ elements (%s=%s)
3765 (W internal) Warnings peculiar to VMS. You tried to change or delete an
3766 element of the CRTL's internal environ array, but your copy of Perl
3767 wasn't built with a CRTL that contained the setenv() function. You'll
3768 need to rebuild Perl with a CRTL that does, or redefine
3769 F<PERL_ENV_TABLES> (see L<perlvms>) so that the environ array isn't the
3770 target of the change to
3771 %ENV which produced the warning.
3773 =item thread failed to start: %s
3775 (F) The entry point function of threads->create() failed for some reason.
3777 =item times not implemented
3779 (F) Your version of the C library apparently doesn't do times(). I
3780 suspect you're not running on Unix.
3782 =item "-T" is on the #! line, it must also be used on the command line
3784 (X) The #! line (or local equivalent) in a Perl script contains the
3785 B<-T> option, but Perl was not invoked with B<-T> in its command line.
3786 This is an error because, by the time Perl discovers a B<-T> in a
3787 script, it's too late to properly taint everything from the environment.
3790 If the Perl script is being executed as a command using the #!
3791 mechanism (or its local equivalent), this error can usually be fixed by
3792 editing the #! line so that the B<-T> option is a part of Perl's first
3793 argument: e.g. change C<perl -n -T> to C<perl -T -n>.
3795 If the Perl script is being executed as C<perl scriptname>, then the
3796 B<-T> option must appear on the command line: C<perl -T scriptname>.
3798 =item To%s: illegal mapping '%s'
3800 (F) You tried to define a customized To-mapping for lc(), lcfirst,
3801 uc(), or ucfirst() (or their string-inlined versions), but you
3802 specified an illegal mapping.
3803 See L<perlunicode/"User-Defined Character Properties">.
3805 =item Too deeply nested ()-groups
3807 (F) Your template contains ()-groups with a ridiculously deep nesting level.
3809 =item Too few args to syscall
3811 (F) There has to be at least one argument to syscall() to specify the
3812 system call to call, silly dilly.
3814 =item Too late for "-%s" option
3816 (X) The #! line (or local equivalent) in a Perl script contains the
3817 B<-M> or B<-m> option. This is an error because B<-M> and B<-m> options
3818 are not intended for use inside scripts. Use the C<use> pragma instead.
3820 =item Too late to run %s block
3822 (W void) A CHECK or INIT block is being defined during run time proper,
3823 when the opportunity to run them has already passed. Perhaps you are
3824 loading a file with C<require> or C<do> when you should be using C<use>
3825 instead. Or perhaps you should put the C<require> or C<do> inside a
3828 =item Too many args to syscall
3830 (F) Perl supports a maximum of only 14 args to syscall().
3832 =item Too many arguments for %s
3834 (F) The function requires fewer arguments than you specified.
3838 (A) You've accidentally run your script through B<csh> instead of Perl.
3839 Check the #! line, or manually feed your script into Perl yourself.
3843 (A) You've accidentally run your script through B<csh> instead of Perl.
3844 Check the #! line, or manually feed your script into Perl yourself.
3846 =item Trailing \ in regex m/%s/
3848 (F) The regular expression ends with an unbackslashed backslash.
3849 Backslash it. See L<perlre>.
3851 =item Transliteration pattern not terminated
3853 (F) The lexer couldn't find the interior delimiter of a tr/// or tr[][]
3854 or y/// or y[][] construct. Missing the leading C<$> from variables
3855 C<$tr> or C<$y> may cause this error.
3857 =item Transliteration replacement not terminated
3859 (F) The lexer couldn't find the final delimiter of a tr///, tr[][],
3860 y/// or y[][] construct.
3862 =item '%s' trapped by operation mask
3864 (F) You tried to use an operator from a Safe compartment in which it's
3865 disallowed. See L<Safe>.
3867 =item truncate not implemented
3869 (F) Your machine doesn't implement a file truncation mechanism that
3870 Configure knows about.
3872 =item Type of arg %d to %s must be %s (not %s)
3874 (F) This function requires the argument in that position to be of a
3875 certain type. Arrays must be @NAME or C<@{EXPR}>. Hashes must be
3876 %NAME or C<%{EXPR}>. No implicit dereferencing is allowed--use the
3877 {EXPR} forms as an explicit dereference. See L<perlref>.
3879 =item umask not implemented
3881 (F) Your machine doesn't implement the umask function and you tried to
3882 use it to restrict permissions for yourself (EXPR & 0700).
3884 =item Unable to create sub named "%s"
3886 (F) You attempted to create or access a subroutine with an illegal name.
3888 =item Unbalanced context: %d more PUSHes than POPs
3890 (W internal) The exit code detected an internal inconsistency in how
3891 many execution contexts were entered and left.
3893 =item Unbalanced saves: %d more saves than restores
3895 (W internal) The exit code detected an internal inconsistency in how
3896 many values were temporarily localized.
3898 =item Unbalanced scopes: %d more ENTERs than LEAVEs
3900 (W internal) The exit code detected an internal inconsistency in how
3901 many blocks were entered and left.
3903 =item Unbalanced tmps: %d more allocs than frees
3905 (W internal) The exit code detected an internal inconsistency in how
3906 many mortal scalars were allocated and freed.
3908 =item Undefined format "%s" called
3910 (F) The format indicated doesn't seem to exist. Perhaps it's really in
3911 another package? See L<perlform>.
3913 =item Undefined sort subroutine "%s" called
3915 (F) The sort comparison routine specified doesn't seem to exist.
3916 Perhaps it's in a different package? See L<perlfunc/sort>.
3918 =item Undefined subroutine &%s called
3920 (F) The subroutine indicated hasn't been defined, or if it was, it has
3921 since been undefined.
3923 =item Undefined subroutine called
3925 (F) The anonymous subroutine you're trying to call hasn't been defined,
3926 or if it was, it has since been undefined.
3928 =item Undefined subroutine in sort
3930 (F) The sort comparison routine specified is declared but doesn't seem
3931 to have been defined yet. See L<perlfunc/sort>.
3933 =item Undefined top format "%s" called
3935 (F) The format indicated doesn't seem to exist. Perhaps it's really in
3936 another package? See L<perlform>.
3938 =item Undefined value assigned to typeglob
3940 (W misc) An undefined value was assigned to a typeglob, a la
3941 C<*foo = undef>. This does nothing. It's possible that you really mean
3944 =item %s: Undefined variable
3946 (A) You've accidentally run your script through B<csh> instead of Perl.
3947 Check the #! line, or manually feed your script into Perl yourself.
3949 =item unexec of %s into %s failed!
3951 (F) The unexec() routine failed for some reason. See your local FSF
3952 representative, who probably put it there in the first place.
3954 =item Unicode character %s is illegal
3956 (W utf8) Certain Unicode characters have been designated off-limits by
3957 the Unicode standard and should not be generated. If you really know
3958 what you are doing you can turn off this warning by C<no warnings 'utf8';>.
3960 =item Unknown BYTEORDER
3962 (F) There are no byte-swapping functions for a machine with this byte
3965 =item Unknown open() mode '%s'
3967 (F) The second argument of 3-argument open() is not among the list
3968 of valid modes: C<< < >>, C<< > >>, C<<< >> >>>, C<< +< >>,
3969 C<< +> >>, C<<< +>> >>>, C<-|>, C<|->, C<< <& >>, C<< >& >>.
3971 =item Unknown PerlIO layer "%s"
3973 (W layer) An attempt was made to push an unknown layer onto the Perl I/O
3974 system. (Layers take care of transforming data between external and
3975 internal representations.) Note that some layers, such as C<mmap>,
3976 are not supported in all environments. If your program didn't
3977 explicitly request the failing operation, it may be the result of the
3978 value of the environment variable PERLIO.
3980 =item Unknown process %x sent message to prime_env_iter: %s
3982 (P) An error peculiar to VMS. Perl was reading values for %ENV before
3983 iterating over it, and someone else stuck a message in the stream of
3984 data Perl expected. Someone's very confused, or perhaps trying to
3985 subvert Perl's population of %ENV for nefarious purposes.
3987 =item Unknown "re" subpragma '%s' (known ones are: %s)
3989 You tried to use an unknown subpragma of the "re" pragma.
3991 =item Unknown switch condition (?(%.2s in regex; marked by <-- HERE in m/%s/
3993 (F) The condition part of a (?(condition)if-clause|else-clause) construct
3994 is not known. The condition may be lookahead or lookbehind (the condition
3995 is true if the lookahead or lookbehind is true), a (?{...}) construct (the
3996 condition is true if the code evaluates to a true value), or a number (the
3997 condition is true if the set of capturing parentheses named by the number
4000 The <-- HERE shows in the regular expression about where the problem was
4001 discovered. See L<perlre>.
4003 =item Unknown Unicode option letter '%c'
4005 You specified an unknown Unicode option. See L<perlrun> documentation
4006 of the C<-C> switch for the list of known options.
4008 =item Unknown Unicode option value %x
4010 You specified an unknown Unicode option. See L<perlrun> documentation
4011 of the C<-C> switch for the list of known options.
4013 =item Unknown warnings category '%s'
4015 (F) An error issued by the C<warnings> pragma. You specified a warnings
4016 category that is unknown to perl at this point.
4018 Note that if you want to enable a warnings category registered by a module
4019 (e.g. C<use warnings 'File::Find'>), you must have imported this module
4022 =item unmatched [ in regex; marked by <-- HERE in m/%s/
4024 (F) The brackets around a character class must match. If you wish to
4025 include a closing bracket in a character class, backslash it or put it
4026 first. The <-- HERE shows in the regular expression about where the problem
4027 was discovered. See L<perlre>.
4029 =item unmatched ( in regex; marked by <-- HERE in m/%s/
4031 (F) Unbackslashed parentheses must always be balanced in regular
4032 expressions. If you're a vi user, the % key is valuable for finding the
4033 matching parenthesis. The <-- HERE shows in the regular expression about
4034 where the problem was discovered. See L<perlre>.
4036 =item Unmatched right %s bracket
4038 (F) The lexer counted more closing curly or square brackets than opening
4039 ones, so you're probably missing a matching opening bracket. As a
4040 general rule, you'll find the missing one (so to speak) near the place
4041 you were last editing.
4043 =item Unquoted string "%s" may clash with future reserved word
4045 (W reserved) You used a bareword that might someday be claimed as a
4046 reserved word. It's best to put such a word in quotes, or capitalize it
4047 somehow, or insert an underbar into it. You might also declare it as a
4050 =item Unrecognized character %s
4052 (F) The Perl parser has no idea what to do with the specified character
4053 in your Perl script (or eval). Perhaps you tried to run a compressed
4054 script, a binary program, or a directory as a Perl program.
4056 =item /%s/: Unrecognized escape \\%c in character class passed through
4058 (W regexp) You used a backslash-character combination which is not
4059 recognized by Perl inside character classes. The character was
4060 understood literally.
4062 =item Unrecognized escape \\%c passed through
4064 (W misc) You used a backslash-character combination which is not
4067 =item Unrecognized escape \\%c passed through in regex; marked by <-- HERE in m/%s/
4069 (W regexp) You used a backslash-character combination which is not
4070 recognized by Perl. This combination appears in an interpolated variable or
4071 a C<'>-delimited regular expression. The character was understood
4072 literally. The <-- HERE shows in the regular expression about where the
4073 escape was discovered.
4075 =item Unrecognized signal name "%s"
4077 (F) You specified a signal name to the kill() function that was not
4078 recognized. Say C<kill -l> in your shell to see the valid signal names
4081 =item Unrecognized switch: -%s (-h will show valid options)
4083 (F) You specified an illegal option to Perl. Don't do that. (If you
4084 think you didn't do that, check the #! line to see if it's supplying the
4085 bad switch on your behalf.)
4087 =item Unsuccessful %s on filename containing newline
4089 (W newline) A file operation was attempted on a filename, and that
4090 operation failed, PROBABLY because the filename contained a newline,
4091 PROBABLY because you forgot to chomp() it off. See L<perlfunc/chomp>.
4093 =item Unsupported directory function "%s" called
4095 (F) Your machine doesn't support opendir() and readdir().
4097 =item Unsupported function %s
4099 (F) This machine doesn't implement the indicated function, apparently.
4100 At least, Configure doesn't think so.
4102 =item Unsupported function fork
4104 (F) Your version of executable does not support forking.
4106 Note that under some systems, like OS/2, there may be different flavors
4107 of Perl executables, some of which may support fork, some not. Try
4108 changing the name you call Perl by to C<perl_>, C<perl__>, and so on.
4110 =item Unsupported script encoding %s
4112 (F) Your program file begins with a Unicode Byte Order Mark (BOM) which
4113 declares it to be in a Unicode encoding that Perl cannot read.
4115 =item Unsupported socket function "%s" called
4117 (F) Your machine doesn't support the Berkeley socket mechanism, or at
4118 least that's what Configure thought.
4120 =item Unterminated attribute list
4122 (F) The lexer found something other than a simple identifier at the
4123 start of an attribute, and it wasn't a semicolon or the start of a
4124 block. Perhaps you terminated the parameter list of the previous
4125 attribute too soon. See L<attributes>.
4127 =item Unterminated attribute parameter in attribute list
4129 (F) The lexer saw an opening (left) parenthesis character while parsing
4130 an attribute list, but the matching closing (right) parenthesis
4131 character was not found. You may need to add (or remove) a backslash
4132 character to get your parentheses to balance. See L<attributes>.
4134 =item Unterminated compressed integer
4136 (F) An argument to unpack("w",...) was incompatible with the BER
4137 compressed integer format and could not be converted to an integer.
4138 See L<perlfunc/pack>.
4140 =item Unterminated <> operator
4142 (F) The lexer saw a left angle bracket in a place where it was expecting
4143 a term, so it's looking for the corresponding right angle bracket, and
4144 not finding it. Chances are you left some needed parentheses out
4145 earlier in the line, and you really meant a "less than".
4147 =item untie attempted while %d inner references still exist
4149 (W untie) A copy of the object returned from C<tie> (or C<tied>) was
4150 still valid when C<untie> was called.
4152 =item Usage: POSIX::%s(%s)
4154 (F) You called a POSIX function with incorrect arguments.
4155 See L<POSIX/FUNCTIONS> for more information.
4157 =item Usage: Win32::%s(%s)
4159 (F) You called a Win32 function with incorrect arguments.
4160 See L<Win32> for more information.
4162 =item Useless (?-%s) - don't use /%s modifier in regex; marked by <-- HERE in m/%s/
4164 (W regexp) You have used an internal modifier such as (?-o) that has no
4165 meaning unless removed from the entire regexp:
4167 if ($string =~ /(?-o)$pattern/o) { ... }
4171 if ($string =~ /$pattern/) { ... }
4173 The <-- HERE shows in the regular expression about
4174 where the problem was discovered. See L<perlre>.
4176 =item Useless localization of %s
4178 (W syntax) The localization of lvalues such as C<local($x=10)> is
4179 legal, but in fact the local() currently has no effect. This may change at
4180 some point in the future, but in the meantime such code is discouraged.
4182 =item Useless (?%s) - use /%s modifier in regex; marked by <-- HERE in m/%s/
4184 (W regexp) You have used an internal modifier such as (?o) that has no
4185 meaning unless applied to the entire regexp:
4187 if ($string =~ /(?o)$pattern/) { ... }
4191 if ($string =~ /$pattern/o) { ... }
4193 The <-- HERE shows in the regular expression about
4194 where the problem was discovered. See L<perlre>.
4196 =item Useless use of %s in void context
4198 (W void) You did something without a side effect in a context that does
4199 nothing with the return value, such as a statement that doesn't return a
4200 value from a block, or the left side of a scalar comma operator. Very
4201 often this points not to stupidity on your part, but a failure of Perl
4202 to parse your program the way you thought it would. For example, you'd
4203 get this if you mixed up your C precedence with Python precedence and
4208 when you meant to say
4210 ($one, $two) = (1, 2);
4212 Another common error is to use ordinary parentheses to construct a list
4213 reference when you should be using square or curly brackets, for
4218 when you should have said
4222 The square brackets explicitly turn a list value into a scalar value,
4223 while parentheses do not. So when a parenthesized list is evaluated in
4224 a scalar context, the comma is treated like C's comma operator, which
4225 throws away the left argument, which is not what you want. See
4226 L<perlref> for more on this.
4228 This warning will not be issued for numerical constants equal to 0 or 1
4229 since they are often used in statements like
4231 1 while sub_with_side_effects() ;
4233 String constants that would normally evaluate to 0 or 1 are warned
4236 =item Useless use of "re" pragma
4238 (W) You did C<use re;> without any arguments. That isn't very useful.
4240 =item Useless use of sort in scalar context
4242 (W void) You used sort in scalar context, as in :
4246 This is not very useful, and perl currently optimizes this away.
4248 =item Useless use of %s with no values
4250 (W syntax) You used the push() or unshift() function with no arguments
4251 apart from the array, like C<push(@x)> or C<unshift(@foo)>. That won't
4252 usually have any effect on the array, so is completely useless. It's
4253 possible in principle that push(@tied_array) could have some effect
4254 if the array is tied to a class which implements a PUSH method. If so,
4255 you can write it as C<push(@tied_array,())> to avoid this warning.
4257 =item "use" not allowed in expression
4259 (F) The "use" keyword is recognized and executed at compile time, and
4260 returns no useful value. See L<perlmod>.
4262 =item Use of bare << to mean <<"" is deprecated
4264 (D deprecated) You are now encouraged to use the explicitly quoted form
4265 if you wish to use an empty line as the terminator of the here-document.
4267 =item Use of chdir('') or chdir(undef) as chdir() deprecated
4269 (D deprecated) chdir() with no arguments is documented to change to
4270 $ENV{HOME} or $ENV{LOGDIR}. chdir(undef) and chdir('') share this
4271 behavior, but that has been deprecated. In future versions they
4274 Be careful to check that what you pass to chdir() is defined and not
4275 blank, else you might find yourself in your home directory.
4277 =item Use of /c modifier is meaningless in s///
4279 (W regexp) You used the /c modifier in a substitution. The /c
4280 modifier is not presently meaningful in substitutions.
4282 =item Use of /c modifier is meaningless without /g
4284 (W regexp) You used the /c modifier with a regex operand, but didn't
4285 use the /g modifier. Currently, /c is meaningful only when /g is
4286 used. (This may change in the future.)
4288 =item Use of freed value in iteration
4290 (F) Perhaps you modified the iterated array within the loop?
4291 This error is typically caused by code like the following:
4294 @a = () for (1,2,@a);
4296 You are not supposed to modify arrays while they are being iterated over.
4297 For speed and efficiency reasons, Perl internally does not do full
4298 reference-counting of iterated items, hence deleting such an item in the
4299 middle of an iteration causes Perl to see a freed value.
4301 =item Use of *glob{FILEHANDLE} is deprecated
4303 (D deprecated) You are now encouraged to use the shorter *glob{IO} form
4304 to access the filehandle slot within a typeglob.
4306 =item Use of /g modifier is meaningless in split
4308 (W regexp) You used the /g modifier on the pattern for a C<split>
4309 operator. Since C<split> always tries to match the pattern
4310 repeatedly, the C</g> has no effect.
4312 =item Use of implicit split to @_ is deprecated
4314 (D deprecated) It makes a lot of work for the compiler when you clobber
4315 a subroutine's argument list, so it's better if you assign the results
4316 of a split() explicitly to an array (or list).
4318 =item Use of inherited AUTOLOAD for non-method %s() is deprecated
4320 (D deprecated) As an (ahem) accidental feature, C<AUTOLOAD> subroutines
4321 are looked up as methods (using the C<@ISA> hierarchy) even when the
4322 subroutines to be autoloaded were called as plain functions (e.g.
4323 C<Foo::bar()>), not as methods (e.g. C<< Foo->bar() >> or C<<
4326 This bug will be rectified in future by using method lookup only for
4327 methods' C<AUTOLOAD>s. However, there is a significant base of existing
4328 code that may be using the old behavior. So, as an interim step, Perl
4329 currently issues an optional warning when non-methods use inherited
4332 The simple rule is: Inheritance will not work when autoloading
4333 non-methods. The simple fix for old code is: In any module that used
4334 to depend on inheriting C<AUTOLOAD> for non-methods from a base class
4335 named C<BaseClass>, execute C<*AUTOLOAD = \&BaseClass::AUTOLOAD> during
4338 In code that currently says C<use AutoLoader; @ISA = qw(AutoLoader);>
4339 you should remove AutoLoader from @ISA and change C<use AutoLoader;> to
4340 C<use AutoLoader 'AUTOLOAD';>.
4342 =item Use of %s in printf format not supported
4344 (F) You attempted to use a feature of printf that is accessible from
4345 only C. This usually means there's a better way to do it in Perl.
4347 =item Use of $# is deprecated
4349 (D deprecated) This was an ill-advised attempt to emulate a poorly
4350 defined B<awk> feature. Use an explicit printf() or sprintf() instead.
4352 =item Use of %s is deprecated
4354 (D deprecated) The construct indicated is no longer recommended for use,
4355 generally because there's a better way to do it, and also because the
4356 old way has bad side effects.
4358 =item Use of -l on filehandle %s
4360 (W io) A filehandle represents an opened file, and when you opened the file
4361 it already went past any symlink you are presumably trying to look for.
4362 The operation returned C<undef>. Use a filename instead.
4364 =item Use of "package" with no arguments is deprecated
4366 (D deprecated) You used the C<package> keyword without specifying a package
4367 name. So no namespace is current at all. Using this can cause many
4368 otherwise reasonable constructs to fail in baffling ways. C<use strict;>
4371 =item Use of reference "%s" as array index
4373 (W misc) You tried to use a reference as an array index; this probably
4374 isn't what you mean, because references in numerical context tend
4375 to be huge numbers, and so usually indicates programmer error.
4377 If you really do mean it, explicitly numify your reference, like so:
4378 C<$array[0+$ref]>. This warning is not given for overloaded objects,
4379 either, because you can overload the numification and stringification
4380 operators and then you assumedly know what you are doing.
4382 =item Use of reserved word "%s" is deprecated
4384 (D deprecated) The indicated bareword is a reserved word. Future
4385 versions of perl may use it as a keyword, so you're better off either
4386 explicitly quoting the word in a manner appropriate for its context of
4387 use, or using a different name altogether. The warning can be
4388 suppressed for subroutine names by either adding a C<&> prefix, or using
4389 a package qualifier, e.g. C<&our()>, or C<Foo::our()>.
4391 =item Use of tainted arguments in %s is deprecated
4393 (W taint, deprecated) You have supplied C<system()> or C<exec()> with multiple
4394 arguments and at least one of them is tainted. This used to be allowed
4395 but will become a fatal error in a future version of perl. Untaint your
4396 arguments. See L<perlsec>.
4398 =item Use of uninitialized value%s
4400 (W uninitialized) An undefined value was used as if it were already
4401 defined. It was interpreted as a "" or a 0, but maybe it was a mistake.
4402 To suppress this warning assign a defined value to your variables.
4404 To help you figure out what was undefined, perl will try to tell you the
4405 name of the variable (if any) that was undefined. In some cases it cannot
4406 do this, so it also tells you what operation you used the undefined value
4407 in. Note, however, that perl optimizes your program and the operation
4408 displayed in the warning may not necessarily appear literally in your
4409 program. For example, C<"that $foo"> is usually optimized into C<"that "
4410 . $foo>, and the warning will refer to the C<concatenation (.)> operator,
4411 even though there is no C<.> in your program.
4413 =item Using a hash as a reference is deprecated
4415 (D deprecated) You tried to use a hash as a reference, as in
4416 C<< %foo->{"bar"} >> or C<< %$ref->{"hello"} >>. Versions of perl <= 5.6.1
4417 used to allow this syntax, but shouldn't have. It is now deprecated, and will
4418 be removed in a future version.
4420 =item Using an array as a reference is deprecated
4422 (D deprecated) You tried to use an array as a reference, as in
4423 C<< @foo->[23] >> or C<< @$ref->[99] >>. Versions of perl <= 5.6.1 used to
4424 allow this syntax, but shouldn't have. It is now deprecated, and will be
4425 removed in a future version.
4427 =item UTF-16 surrogate %s
4429 (W utf8) You tried to generate half of an UTF-16 surrogate by
4430 requesting a Unicode character between the code points 0xD800 and
4431 0xDFFF (inclusive). That range is reserved exclusively for the use of
4432 UTF-16 encoding (by having two 16-bit UCS-2 characters); but Perl
4433 encodes its characters in UTF-8, so what you got is a very illegal
4434 character. If you really know what you are doing you can turn off
4435 this warning by C<no warnings 'utf8';>.
4437 =item Value of %s can be "0"; test with defined()
4439 (W misc) In a conditional expression, you used <HANDLE>, <*> (glob),
4440 C<each()>, or C<readdir()> as a boolean value. Each of these constructs
4441 can return a value of "0"; that would make the conditional expression
4442 false, which is probably not what you intended. When using these
4443 constructs in conditional expressions, test their values with the
4444 C<defined> operator.
4446 =item Value of CLI symbol "%s" too long
4448 (W misc) A warning peculiar to VMS. Perl tried to read the value of an
4449 %ENV element from a CLI symbol table, and found a resultant string
4450 longer than 1024 characters. The return value has been truncated to
4453 =item Variable "%s" is not available
4455 (W closure) During compilation, an inner named subroutine or eval is
4456 attempting to capture an outer lexical that is not currently available.
4457 This can happen for one of two reasons. First, the outer lexical may be
4458 declared in an outer anonymous subroutine that has not yet been created.
4459 (Remember that named subs are created at compile time, while anonymous
4460 subs are created at run-time.) For example,
4462 sub { my $a; sub f { $a } }
4464 At the time that f is created, it can't capture the current value of $a,
4465 since the anonymous subroutine hasn't been created yet. Conversely,
4466 the following won't give a warning since the anonymous subroutine has by
4467 now been created and is live:
4469 sub { my $a; eval 'sub f { $a }' }->();
4471 The second situation is caused by an eval accessing a variable that has
4472 gone out of scope, for example,
4480 Here, when the '$a' in the eval is being compiled, f() is not currently being
4481 executed, so its $a is not available for capture.
4483 =item Variable "%s" is not imported%s
4485 (F) While "use strict" in effect, you referred to a global variable that
4486 you apparently thought was imported from another module, because
4487 something else of the same name (usually a subroutine) is exported by
4488 that module. It usually means you put the wrong funny character on the
4489 front of your variable.
4491 =item Variable length lookbehind not implemented in regex; marked by <-- HERE in m/%s/
4493 (F) Lookbehind is allowed only for subexpressions whose length is fixed and
4494 known at compile time. The <-- HERE shows in the regular expression about
4495 where the problem was discovered. See L<perlre>.
4497 =item "%s" variable %s masks earlier declaration in same %s
4499 (W misc) A "my" or "our" variable has been redeclared in the current
4500 scope or statement, effectively eliminating all access to the previous
4501 instance. This is almost always a typographical error. Note that the
4502 earlier variable will still exist until the end of the scope or until
4503 all closure referents to it are destroyed.
4505 =item Variable syntax
4507 (A) You've accidentally run your script through B<csh> instead
4508 of Perl. Check the #! line, or manually feed your script into
4511 =item Variable "%s" will not stay shared
4513 (W closure) An inner (nested) I<named> subroutine is referencing a
4514 lexical variable defined in an outer named subroutine.
4516 When the inner subroutine is called, it will see the value of
4517 the outer subroutine's variable as it was before and during the *first*
4518 call to the outer subroutine; in this case, after the first call to the
4519 outer subroutine is complete, the inner and outer subroutines will no
4520 longer share a common value for the variable. In other words, the
4521 variable will no longer be shared.
4523 This problem can usually be solved by making the inner subroutine
4524 anonymous, using the C<sub {}> syntax. When inner anonymous subs that
4525 reference variables in outer subroutines are created, they
4526 are automatically rebound to the current values of such variables.
4528 =item Version number must be a constant number
4530 (P) The attempt to translate a C<use Module n.n LIST> statement into
4531 its equivalent C<BEGIN> block found an internal inconsistency with
4534 =item v-string in use/require is non-portable
4536 (W portable) The use of v-strings is non-portable to older, pre-5.6, Perls.
4537 If you want your scripts to be backward portable, use the floating
4538 point version number: for example, instead of C<use 5.6.1> say
4539 C<use 5.006_001>. This of course won't help: the older Perls
4540 won't suddenly start understanding newer features, but at least
4541 they will show a sensible error message indicating the required
4544 =item Warning: something's wrong
4546 (W) You passed warn() an empty string (the equivalent of C<warn "">) or
4547 you called it with no args and C<$_> was empty.
4549 =item Warning: unable to close filehandle %s properly
4551 (S) The implicit close() done by an open() got an error indication on
4552 the close(). This usually indicates your file system ran out of disk
4555 =item Warning: Use of "%s" without parentheses is ambiguous
4557 (S ambiguous) You wrote a unary operator followed by something that
4558 looks like a binary operator that could also have been interpreted as a
4559 term or unary operator. For instance, if you know that the rand
4560 function has a default argument of 1.0, and you write
4564 you may THINK you wrote the same thing as
4568 but in actual fact, you got
4572 So put in parentheses to say what you really mean.
4574 =item Wide character in %s
4576 (W utf8) Perl met a wide character (>255) when it wasn't expecting
4577 one. This warning is by default on for I/O (like print). The easiest
4578 way to quiet this warning is simply to add the C<:utf8> layer to the
4579 output, e.g. C<binmode STDOUT, ':utf8'>. Another way to turn off the
4580 warning is to add C<no warnings 'utf8';> but that is often closer to
4581 cheating. In general, you are supposed to explicitly mark the
4582 filehandle with an encoding, see L<open> and L<perlfunc/binmode>.
4584 =item Within []-length '%c' not allowed
4586 (F) The count in the (un)pack template may be replaced by C<[TEMPLATE]> only if
4587 C<TEMPLATE> always matches the same amount of packed bytes that can be
4588 determined from the template alone. This is not possible if it contains an
4589 of the codes @, /, U, u, w or a *-length. Redesign the template.
4591 =item write() on closed filehandle %s
4593 (W closed) The filehandle you're writing to got itself closed sometime
4594 before now. Check your control flow.
4596 =item %s "\x%s" does not map to Unicode
4598 When reading in different encodings Perl tries to map everything
4599 into Unicode characters. The bytes you read in are not legal in
4600 this encoding, for example
4602 utf8 "\xE4" does not map to Unicode
4604 if you try to read in the a-diaereses Latin-1 as UTF-8.
4606 =item 'X' outside of string
4608 (F) You had a (un)pack template that specified a relative position before
4609 the beginning of the string being (un)packed. See L<perlfunc/pack>.
4611 =item 'x' outside of string in unpack
4613 (F) You had a pack template that specified a relative position after
4614 the end of the string being unpacked. See L<perlfunc/pack>.
4616 =item Xsub "%s" called in sort
4618 (F) The use of an external subroutine as a sort comparison is not yet
4621 =item Xsub called in sort
4623 (F) The use of an external subroutine as a sort comparison is not yet
4626 =item YOU HAVEN'T DISABLED SET-ID SCRIPTS IN THE KERNEL YET!
4628 (F) And you probably never will, because you probably don't have the
4629 sources to your kernel, and your vendor probably doesn't give a rip
4630 about what you want. Your best bet is to put a setuid C wrapper around
4633 =item You need to quote "%s"
4635 (W syntax) You assigned a bareword as a signal handler name.
4636 Unfortunately, you already have a subroutine of that name declared,
4637 which means that Perl 5 will try to call the subroutine when the
4638 assignment is executed, which is probably not what you want. (If it IS
4639 what you want, put an & in front.)
4641 =item Your random numbers are not that random
4643 (F) When trying to initialise the random seed for hashes, Perl could
4644 not get any randomness out of your system. This usually indicates
4645 Something Very Wrong.