3 perldiag - various Perl diagnostics
7 These messages are classified as follows (listed in increasing order of
10 (W) A warning (optional).
11 (D) A deprecation (optional).
12 (S) A severe warning (mandatory).
13 (F) A fatal error (trappable).
14 (P) An internal error you should never see (trappable).
15 (X) A very fatal error (nontrappable).
16 (A) An alien error message (not generated by Perl).
18 Optional warnings are enabled by using the B<-w> switch. Warnings may
19 be captured by setting C<$SIG{__WARN__}> to a reference to a routine that
20 will be called on each warning instead of printing it. See L<perlvar>.
21 Trappable errors may be trapped using the eval operator. See
24 Some of these messages are generic. Spots that vary are denoted with a %s,
25 just as in a printf format. Note that some messages start with a %s!
26 The symbols C<"%(-?@> sort before the letters, while C<[> and C<\> sort after.
30 =item "my" variable %s can't be in a package
32 (F) Lexically scoped variables aren't in a package, so it doesn't make sense
33 to try to declare one with a package qualifier on the front. Use local()
34 if you want to localize a package variable.
36 =item "my" variable %s masks earlier declaration in same %s
38 (W) A lexical variable has been redeclared in the current scope or statement,
39 effectively eliminating all access to the previous instance. This is almost
40 always a typographical error. Note that the earlier variable will still exist
41 until the end of the scope or until all closure referents to it are
44 =item "no" not allowed in expression
46 (F) The "no" keyword is recognized and executed at compile time, and returns
47 no useful value. See L<perlmod>.
49 =item "use" not allowed in expression
51 (F) The "use" keyword is recognized and executed at compile time, and returns
52 no useful value. See L<perlmod>.
54 =item '!' allowed only after types %s
56 (F) The '!' is allowed in pack() and unpack() only after certain types.
59 =item # cannot take a count
61 (F) You had an unpack template indicating a counted-length string,
62 but you have also specified an explicit size for the string.
65 =item # must be followed by a, A or Z
67 (F) You had an unpack template indicating a counted-length string,
68 which must be followed by one of the letters a, A or Z
69 to indicate what sort of string is to be unpacked.
72 =item # must be followed by a*, A* or Z*
74 (F) You had an pack template indicating a counted-length string,
75 Currently the only things that can have their length counted are a*, A* or Z*.
78 =item # must follow a numeric type
80 (F) You had an unpack template that contained a '#',
81 but this did not follow some numeric unpack specification.
84 =item % may only be used in unpack
86 (F) You can't pack a string by supplying a checksum, because the
87 checksumming process loses information, and you can't go the other
88 way. See L<perlfunc/unpack>.
90 =item Repeat count in pack overflows
92 (F) You can't specify a repeat count so large that it overflows
93 your signed integers. See L<perlfunc/pack>.
95 =item Repeat count in unpack overflows
97 (F) You can't specify a repeat count so large that it overflows
98 your signed integers. See L<perlfunc/unpack>.
100 =item /%s/: Unrecognized escape \\%c passed through
102 (W) You used a backslash-character combination which is not recognized
103 by Perl. This combination appears in an interpolated variable or a
104 C<'>-delimited regular expression.
106 =item %s (...) interpreted as function
108 (W) You've run afoul of the rule that says that any list operator followed
109 by parentheses turns into a function, with all the list operators arguments
110 found inside the parentheses. See L<perlop/Terms and List Operators (Leftward)>.
112 =item %s() called too early to check prototype
114 (W) You've called a function that has a prototype before the parser saw a
115 definition or declaration for it, and Perl could not check that the call
116 conforms to the prototype. You need to either add an early prototype
117 declaration for the subroutine in question, or move the subroutine
118 definition ahead of the call to get proper prototype checking. Alternatively,
119 if you are certain that you're calling the function correctly, you may put
120 an ampersand before the name to avoid the warning. See L<perlsub>.
122 =item %s argument is not a HASH element
124 (F) The argument to exists() must be a hash element, such as
127 $ref->[12]->{"susie"}
129 =item %s argument is not a HASH element or slice
131 (F) The argument to delete() must be either a hash element, such as
134 $ref->[12]->{"susie"}
136 or a hash slice, such as
138 @foo{$bar, $baz, $xyzzy}
139 @{$ref->[12]}{"susie", "queue"}
141 =item %s did not return a true value
143 (F) A required (or used) file must return a true value to indicate that
144 it compiled correctly and ran its initialization code correctly. It's
145 traditional to end such a file with a "1;", though any true value would
146 do. See L<perlfunc/require>.
148 =item %s found where operator expected
150 (S) The Perl lexer knows whether to expect a term or an operator. If it
151 sees what it knows to be a term when it was expecting to see an operator,
152 it gives you this warning. Usually it indicates that an operator or
153 delimiter was omitted, such as a semicolon.
155 =item %s had compilation errors
157 (F) The final summary message when a C<perl -c> fails.
159 =item %s has too many errors
161 (F) The parser has given up trying to parse the program after 10 errors.
162 Further error messages would likely be uninformative.
164 =item %s matches null string many times
166 (W) The pattern you've specified would be an infinite loop if the
167 regular expression engine didn't specifically check for that. See L<perlre>.
169 =item %s never introduced
171 (S) The symbol in question was declared but somehow went out of scope
172 before it could possibly have been used.
176 (F) The final summary message when a C<perl -c> succeeds.
178 =item %s: Command not found
180 (A) You've accidentally run your script through B<csh> instead
181 of Perl. Check the #! line, or manually feed your script into
184 =item %s: Expression syntax
186 (A) You've accidentally run your script through B<csh> instead
187 of Perl. Check the #! line, or manually feed your script into
190 =item %s: Undefined variable
192 (A) You've accidentally run your script through B<csh> instead
193 of Perl. Check the #! line, or manually feed your script into
198 (A) You've accidentally run your script through the Bourne shell
199 instead of Perl. Check the #! line, or manually feed your script
202 =item (in cleanup) %s
204 (W) This prefix usually indicates that a DESTROY() method raised
205 the indicated exception. Since destructors are usually called by
206 the system at arbitrary points during execution, and often a vast
207 number of times, the warning is issued only once for any number
208 of failures that would otherwise result in the same message being
211 Failure of user callbacks dispatched using the C<G_KEEPERR> flag
212 could also result in this warning. See L<perlcall/G_KEEPERR>.
214 =item (Missing semicolon on previous line?)
216 (S) This is an educated guess made in conjunction with the message "%s
217 found where operator expected". Don't automatically put a semicolon on
218 the previous line just because you saw this message.
220 =item B<-P> not allowed for setuid/setgid script
222 (F) The script would have to be opened by the C preprocessor by name,
223 which provides a race condition that breaks security.
225 =item C<-T> and C<-B> not implemented on filehandles
227 (F) Perl can't peek at the stdio buffer of filehandles when it doesn't
228 know about your kind of stdio. You'll have to use a filename instead.
230 =item C<-p> destination: %s
232 (F) An error occurred during the implicit output invoked by the C<-p>
233 command-line switch. (This output goes to STDOUT unless you've
234 redirected it with select().)
236 =item 500 Server error
240 =item ?+* follows nothing in regexp
242 (F) You started a regular expression with a quantifier. Backslash it
243 if you meant it literally. See L<perlre>.
245 =item @ outside of string
247 (F) You had a pack template that specified an absolute position outside
248 the string being unpacked. See L<perlfunc/pack>.
250 =item <> should be quotes
252 (F) You wrote C<require E<lt>fileE<gt>> when you should have written
255 =item accept() on closed fd
257 (W) You tried to do an accept on a closed socket. Did you forget to check
258 the return value of your socket() call? See L<perlfunc/accept>.
260 =item Allocation too large: %lx
262 (X) You can't allocate more than 64K on an MS-DOS machine.
264 =item Applying %s to %s will act on scalar(%s)
266 (W) The pattern match (//), substitution (s///), and transliteration (tr///)
267 operators work on scalar values. If you apply one of them to an array
268 or a hash, it will convert the array or hash to a scalar value -- the
269 length of an array, or the population info of a hash -- and then work on
270 that scalar value. This is probably not what you meant to do. See
271 L<perlfunc/grep> and L<perlfunc/map> for alternatives.
273 =item Arg too short for msgsnd
275 (F) msgsnd() requires a string at least as long as sizeof(long).
277 =item Ambiguous use of %s resolved as %s
279 (W)(S) You said something that may not be interpreted the way
280 you thought. Normally it's pretty easy to disambiguate it by supplying
281 a missing quote, operator, parenthesis pair or declaration.
283 =item Ambiguous call resolved as CORE::%s(), qualify as such or use &
285 (W) A subroutine you have declared has the same name as a Perl keyword,
286 and you have used the name without qualification for calling one or the
287 other. Perl decided to call the builtin because the subroutine is
290 To force interpretation as a subroutine call, either put an ampersand
291 before the subroutine name, or qualify the name with its package.
292 Alternatively, you can import the subroutine (or pretend that it's
293 imported with the C<use subs> pragma).
295 To silently interpret it as the Perl operator, use the C<CORE::> prefix
296 on the operator (e.g. C<CORE::log($x)>) or by declaring the subroutine
297 to be an object method (see L<attrs>).
299 =item Args must match #! line
301 (F) The setuid emulator requires that the arguments Perl was invoked
302 with match the arguments specified on the #! line. Since some systems
303 impose a one-argument limit on the #! line, try combining switches;
304 for example, turn C<-w -U> into C<-wU>.
306 =item Argument "%s" isn't numeric%s
308 (W) The indicated string was fed as an argument to an operator that
309 expected a numeric value instead. If you're fortunate the message
310 will identify which operator was so unfortunate.
312 =item Array @%s missing the @ in argument %d of %s()
314 (D) Really old Perl let you omit the @ on array names in some spots. This
315 is now heavily deprecated.
317 =item assertion botched: %s
319 (P) The malloc package that comes with Perl had an internal failure.
321 =item Assertion failed: file "%s"
323 (P) A general assertion failed. The file in question must be examined.
325 =item Assignment to both a list and a scalar
327 (F) If you assign to a conditional operator, the 2nd and 3rd arguments
328 must either both be scalars or both be lists. Otherwise Perl won't
329 know which context to supply to the right side.
331 =item Attempt to free non-arena SV: 0x%lx
333 (P) All SV objects are supposed to be allocated from arenas that will
334 be garbage collected on exit. An SV was discovered to be outside any
337 =item Attempt to free nonexistent shared string
339 (P) Perl maintains a reference counted internal table of strings to
340 optimize the storage and access of hash keys and other strings. This
341 indicates someone tried to decrement the reference count of a string
342 that can no longer be found in the table.
344 =item Attempt to free temp prematurely
346 (W) Mortalized values are supposed to be freed by the free_tmps()
347 routine. This indicates that something else is freeing the SV before
348 the free_tmps() routine gets a chance, which means that the free_tmps()
349 routine will be freeing an unreferenced scalar when it does try to free
352 =item Attempt to free unreferenced glob pointers
354 (P) The reference counts got screwed up on symbol aliases.
356 =item Attempt to free unreferenced scalar
358 (W) Perl went to decrement the reference count of a scalar to see if it
359 would go to 0, and discovered that it had already gone to 0 earlier,
360 and should have been freed, and in fact, probably was freed. This
361 could indicate that SvREFCNT_dec() was called too many times, or that
362 SvREFCNT_inc() was called too few times, or that the SV was mortalized
363 when it shouldn't have been, or that memory has been corrupted.
365 =item Attempt to join self
367 (F) You tried to join a thread from within itself, which is an
368 impossible task. You may be joining the wrong thread, or you may
369 need to move the join() to some other thread.
371 =item Attempt to pack pointer to temporary value
373 (W) You tried to pass a temporary value (like the result of a
374 function, or a computed expression) to the "p" pack() template. This
375 means the result contains a pointer to a location that could become
376 invalid anytime, even before the end of the current statement. Use
377 literals or global values as arguments to the "p" pack() template to
380 =item Attempt to use reference as lvalue in substr
382 (W) You supplied a reference as the first argument to substr() used
383 as an lvalue, which is pretty strange. Perhaps you forgot to
384 dereference it first. See L<perlfunc/substr>.
386 =item Bad arg length for %s, is %d, should be %d
388 (F) You passed a buffer of the wrong size to one of msgctl(), semctl() or
389 shmctl(). In C parlance, the correct sizes are, respectively,
390 S<sizeof(struct msqid_ds *)>, S<sizeof(struct semid_ds *)>, and
391 S<sizeof(struct shmid_ds *)>.
393 =item Bad filehandle: %s
395 (F) A symbol was passed to something wanting a filehandle, but the symbol
396 has no filehandle associated with it. Perhaps you didn't do an open(), or
397 did it in another package.
399 =item Bad free() ignored
401 (S) An internal routine called free() on something that had never been
402 malloc()ed in the first place. Mandatory, but can be disabled by
403 setting environment variable C<PERL_BADFREE> to 1.
405 This message can be quite often seen with DB_File on systems with
406 "hard" dynamic linking, like C<AIX> and C<OS/2>. It is a bug of
407 C<Berkeley DB> which is left unnoticed if C<DB> uses I<forgiving>
412 (P) One of the internal hash routines was passed a null HV pointer.
414 =item Bad index while coercing array into hash
416 (F) The index looked up in the hash found as the 0'th element of a
417 pseudo-hash is not legal. Index values must be at 1 or greater.
420 =item Bad name after %s::
422 (F) You started to name a symbol by using a package prefix, and then didn't
423 finish the symbol. In particular, you can't interpolate outside of quotes,
432 $sym = "mypack::$var";
434 =item Bad symbol for array
436 (P) An internal request asked to add an array entry to something that
437 wasn't a symbol table entry.
439 =item Bad symbol for filehandle
441 (P) An internal request asked to add a filehandle entry to something that
442 wasn't a symbol table entry.
444 =item Bad symbol for hash
446 (P) An internal request asked to add a hash entry to something that
447 wasn't a symbol table entry.
449 =item Badly placed ()'s
451 (A) You've accidentally run your script through B<csh> instead
452 of Perl. Check the #! line, or manually feed your script into
455 =item Bareword "%s" not allowed while "strict subs" in use
457 (F) With "strict subs" in use, a bareword is only allowed as a
458 subroutine identifier, in curly brackets or to the left of the "=>" symbol.
459 Perhaps you need to predeclare a subroutine?
461 =item Bareword "%s" refers to nonexistent package
463 (W) You used a qualified bareword of the form C<Foo::>, but
464 the compiler saw no other uses of that namespace before that point.
465 Perhaps you need to predeclare a package?
467 =item BEGIN failed--compilation aborted
469 (F) An untrapped exception was raised while executing a BEGIN subroutine.
470 Compilation stops immediately and the interpreter is exited.
472 =item BEGIN not safe after errors--compilation aborted
474 (F) Perl found a C<BEGIN {}> subroutine (or a C<use> directive, which
475 implies a C<BEGIN {}>) after one or more compilation errors had
476 already occurred. Since the intended environment for the C<BEGIN {}>
477 could not be guaranteed (due to the errors), and since subsequent code
478 likely depends on its correct operation, Perl just gave up.
480 =item Binary number > 0b11111111111111111111111111111111 non-portable
482 (W) The binary number you specified is larger than 2**32-1
483 (4294967295) and therefore non-portable between systems. See
484 L<perlport> for more on portability concerns.
486 =item bind() on closed fd
488 (W) You tried to do a bind on a closed socket. Did you forget to check
489 the return value of your socket() call? See L<perlfunc/bind>.
491 =item Bizarre copy of %s in %s
493 (P) Perl detected an attempt to copy an internal value that is not copiable.
495 =item Buffer overflow in prime_env_iter: %s
497 (W) A warning peculiar to VMS. While Perl was preparing to iterate over
498 %ENV, it encountered a logical name or symbol definition which was too long,
499 so it was truncated to the string shown.
501 =item Callback called exit
503 (F) A subroutine invoked from an external package via perl_call_sv()
504 exited by calling exit.
506 =item Can't "goto" outside a block
508 (F) A "goto" statement was executed to jump out of what might look
509 like a block, except that it isn't a proper block. This usually
510 occurs if you tried to jump out of a sort() block or subroutine, which
511 is a no-no. See L<perlfunc/goto>.
513 =item Can't "goto" into the middle of a foreach loop
515 (F) A "goto" statement was executed to jump into the middle of a
516 foreach loop. You can't get there from here. See L<perlfunc/goto>.
518 =item Can't "last" outside a block
520 (F) A "last" statement was executed to break out of the current block,
521 except that there's this itty bitty problem called there isn't a
522 current block. Note that an "if" or "else" block doesn't count as a
523 "loopish" block, as doesn't a block given to sort(). You can usually double
524 the curlies to get the same effect though, because the inner curlies
525 will be considered a block that loops once. See L<perlfunc/last>.
527 =item Can't "next" outside a block
529 (F) A "next" statement was executed to reiterate the current block, but
530 there isn't a current block. Note that an "if" or "else" block doesn't
531 count as a "loopish" block, as doesn't a block given to sort(). You can
532 usually double the curlies to get the same effect though, because the inner
533 curlies will be considered a block that loops once. See L<perlfunc/next>.
535 =item Can't read CRTL environ
537 (S) A warning peculiar to VMS. Perl tried to read an element of %ENV
538 from the CRTL's internal environment array and discovered the array was
539 missing. You need to figure out where your CRTL misplaced its environ
540 or define F<PERL_ENV_TABLES> (see L<perlvms>) so that environ is not searched.
542 =item Can't "redo" outside a block
544 (F) A "redo" statement was executed to restart the current block, but
545 there isn't a current block. Note that an "if" or "else" block doesn't
546 count as a "loopish" block, as doesn't a block given to sort(). You can
547 usually double the curlies to get the same effect though, because the inner
548 curlies will be considered a block that loops once. See L<perlfunc/redo>.
550 =item Can't bless non-reference value
552 (F) Only hard references may be blessed. This is how Perl "enforces"
553 encapsulation of objects. See L<perlobj>.
555 =item Can't break at that line
557 (S) A warning intended to only be printed while running within the debugger, indicating
558 the line number specified wasn't the location of a statement that could
561 =item Can't call method "%s" in empty package "%s"
563 (F) You called a method correctly, and it correctly indicated a package
564 functioning as a class, but that package doesn't have ANYTHING defined
565 in it, let alone methods. See L<perlobj>.
567 =item Can't call method "%s" on unblessed reference
569 (F) A method call must know in what package it's supposed to run. It
570 ordinarily finds this out from the object reference you supply, but
571 you didn't supply an object reference in this case. A reference isn't
572 an object reference until it has been blessed. See L<perlobj>.
574 =item Can't call method "%s" without a package or object reference
576 (F) You used the syntax of a method call, but the slot filled by the
577 object reference or package name contains an expression that returns
578 a defined value which is neither an object reference nor a package name.
579 Something like this will reproduce the error:
582 process $BADREF 1,2,3;
583 $BADREF->process(1,2,3);
585 =item Can't call method "%s" on an undefined value
587 (F) You used the syntax of a method call, but the slot filled by the
588 object reference or package name contains an undefined value.
589 Something like this will reproduce the error:
592 process $BADREF 1,2,3;
593 $BADREF->process(1,2,3);
595 =item Can't chdir to %s
597 (F) You called C<perl -x/foo/bar>, but C</foo/bar> is not a directory
598 that you can chdir to, possibly because it doesn't exist.
600 =item Can't check filesystem of script "%s"
602 (P) For some reason you can't check the filesystem of the script for nosuid.
604 =item Can't coerce %s to integer in %s
606 (F) Certain types of SVs, in particular real symbol table entries
607 (typeglobs), can't be forced to stop being what they are. So you can't
617 but then $foo no longer contains a glob.
619 =item Can't coerce %s to number in %s
621 (F) Certain types of SVs, in particular real symbol table entries
622 (typeglobs), can't be forced to stop being what they are.
624 =item Can't coerce %s to string in %s
626 (F) Certain types of SVs, in particular real symbol table entries
627 (typeglobs), can't be forced to stop being what they are.
629 =item Can't coerce array into hash
631 (F) You used an array where a hash was expected, but the array has no
632 information on how to map from keys to array indices. You can do that
633 only with arrays that have a hash reference at index 0.
635 =item Can't create pipe mailbox
637 (P) An error peculiar to VMS. The process is suffering from exhausted quotas
638 or other plumbing problems.
640 =item Can't declare %s in my
642 (F) Only scalar, array, and hash variables may be declared as lexical variables.
643 They must have ordinary identifiers as names.
645 =item Can't do inplace edit on %s: %s
647 (S) The creation of the new file failed for the indicated reason.
649 =item Can't do inplace edit without backup
651 (F) You're on a system such as MS-DOS that gets confused if you try reading
652 from a deleted (but still opened) file. You have to say C<-i.bak>, or some
655 =item Can't do inplace edit: %s E<gt> 14 characters
657 (S) There isn't enough room in the filename to make a backup name for the file.
659 =item Can't do inplace edit: %s is not a regular file
661 (S) You tried to use the B<-i> switch on a special file, such as a file in
662 /dev, or a FIFO. The file was ignored.
664 =item Can't do setegid!
666 (P) The setegid() call failed for some reason in the setuid emulator
669 =item Can't do seteuid!
671 (P) The setuid emulator of suidperl failed for some reason.
673 =item Can't do setuid
675 (F) This typically means that ordinary perl tried to exec suidperl to
676 do setuid emulation, but couldn't exec it. It looks for a name of the
677 form sperl5.000 in the same directory that the perl executable resides
678 under the name perl5.000, typically /usr/local/bin on Unix machines.
679 If the file is there, check the execute permissions. If it isn't, ask
680 your sysadmin why he and/or she removed it.
682 =item Can't do waitpid with flags
684 (F) This machine doesn't have either waitpid() or wait4(), so only waitpid()
685 without flags is emulated.
687 =item Can't do {n,m} with n E<gt> m
689 (F) Minima must be less than or equal to maxima. If you really want
690 your regexp to match something 0 times, just put {0}. See L<perlre>.
692 =item Can't emulate -%s on #! line
694 (F) The #! line specifies a switch that doesn't make sense at this point.
695 For example, it'd be kind of silly to put a B<-x> on the #! line.
697 =item Can't exec "%s": %s
699 (W) An system(), exec(), or piped open call could not execute the named
700 program for the indicated reason. Typical reasons include: the permissions
701 were wrong on the file, the file wasn't found in C<$ENV{PATH}>, the
702 executable in question was compiled for another architecture, or the
703 #! line in a script points to an interpreter that can't be run for
704 similar reasons. (Or maybe your system doesn't support #! at all.)
708 (F) Perl was trying to execute the indicated program for you because that's
709 what the #! line said. If that's not what you wanted, you may need to
710 mention "perl" on the #! line somewhere.
712 =item Can't execute %s
714 (F) You used the B<-S> switch, but the copies of the script to execute found
715 in the PATH did not have correct permissions.
717 =item Can't find %s on PATH, '.' not in PATH
719 (F) You used the B<-S> switch, but the script to execute could not be found
720 in the PATH, or at least not with the correct permissions. The script
721 exists in the current directory, but PATH prohibits running it.
723 =item Can't find %s on PATH
725 (F) You used the B<-S> switch, but the script to execute could not be found
728 =item Can't find label %s
730 (F) You said to goto a label that isn't mentioned anywhere that it's possible
731 for us to go to. See L<perlfunc/goto>.
733 =item Can't find string terminator %s anywhere before EOF
735 (F) Perl strings can stretch over multiple lines. This message means that
736 the closing delimiter was omitted. Because bracketed quotes count nesting
737 levels, the following is missing its final parenthesis:
739 print q(The character '(' starts a side comment.);
741 If you're getting this error from a here-document, you may have
742 included unseen whitespace before or after your closing tag. A good
743 programmer's editor will have a way to help you find these characters.
747 (F) A fatal error occurred while trying to fork while opening a pipeline.
749 =item Can't get filespec - stale stat buffer?
751 (S) A warning peculiar to VMS. This arises because of the difference between
752 access checks under VMS and under the Unix model Perl assumes. Under VMS,
753 access checks are done by filename, rather than by bits in the stat buffer, so
754 that ACLs and other protections can be taken into account. Unfortunately, Perl
755 assumes that the stat buffer contains all the necessary information, and passes
756 it, instead of the filespec, to the access checking routine. It will try to
757 retrieve the filespec using the device name and FID present in the stat buffer,
758 but this works only if you haven't made a subsequent call to the CRTL stat()
759 routine, because the device name is overwritten with each call. If this warning
760 appears, the name lookup failed, and the access checking routine gave up and
761 returned FALSE, just to be conservative. (Note: The access checking routine
762 knows about the Perl C<stat> operator and file tests, so you shouldn't ever
763 see this warning in response to a Perl command; it arises only if some internal
764 code takes stat buffers lightly.)
766 =item Can't get pipe mailbox device name
768 (P) An error peculiar to VMS. After creating a mailbox to act as a pipe, Perl
769 can't retrieve its name for later use.
771 =item Can't get SYSGEN parameter value for MAXBUF
773 (P) An error peculiar to VMS. Perl asked $GETSYI how big you want your
774 mailbox buffers to be, and didn't get an answer.
776 =item Can't goto subroutine outside a subroutine
778 (F) The deeply magical "goto subroutine" call can only replace one subroutine
779 call for another. It can't manufacture one out of whole cloth. In general
780 you should be calling it out of only an AUTOLOAD routine anyway. See
783 =item Can't goto subroutine from an eval-string
785 (F) The "goto subroutine" call can't be used to jump out of an eval "string".
786 (You can use it to jump out of an eval {BLOCK}, but you probably don't want to.)
788 =item Can't localize through a reference
790 (F) You said something like C<local $$ref>, which Perl can't currently
791 handle, because when it goes to restore the old value of whatever $ref
792 pointed to after the scope of the local() is finished, it can't be
793 sure that $ref will still be a reference.
795 =item Can't localize lexical variable %s
797 (F) You used local on a variable name that was previously declared as a
798 lexical variable using "my". This is not allowed. If you want to
799 localize a package variable of the same name, qualify it with the
802 =item Can't localize pseudo-hash element
804 (F) You said something like C<local $ar-E<gt>{'key'}>, where $ar is
805 a reference to a pseudo-hash. That hasn't been implemented yet, but
806 you can get a similar effect by localizing the corresponding array
807 element directly -- C<local $ar-E<gt>[$ar-E<gt>[0]{'key'}]>.
809 =item Can't locate auto/%s.al in @INC
811 (F) A function (or method) was called in a package which allows autoload,
812 but there is no function to autoload. Most probable causes are a misprint
813 in a function/method name or a failure to C<AutoSplit> the file, say, by
814 doing C<make install>.
816 =item Can't locate %s
818 (F) You said to C<do> (or C<require>, or C<use>) a file that couldn't be
819 found. Perl looks for the file in all the locations mentioned in @INC,
820 unless the file name included the full path to the file. Perhaps you need
821 to set the PERL5LIB or PERL5OPT environment variable to say where the extra
822 library is, or maybe the script needs to add the library name to @INC. Or
823 maybe you just misspelled the name of the file. See L<perlfunc/require>
826 =item Can't locate object method "%s" via package "%s"
828 (F) You called a method correctly, and it correctly indicated a package
829 functioning as a class, but that package doesn't define that particular
830 method, nor does any of its base classes. See L<perlobj>.
832 =item Can't locate package %s for @%s::ISA
834 (W) The @ISA array contained the name of another package that doesn't seem
837 =item Can't make list assignment to \%ENV on this system
839 (F) List assignment to %ENV is not supported on some systems, notably VMS.
841 =item Can't modify %s in %s
843 (F) You aren't allowed to assign to the item indicated, or otherwise try to
844 change it, such as with an auto-increment.
846 =item Can't modify nonexistent substring
848 (P) The internal routine that does assignment to a substr() was handed
851 =item Can't msgrcv to read-only var
853 (F) The target of a msgrcv must be modifiable to be used as a receive
856 =item Can't open %s: %s
858 (S) The implicit opening of a file through use of the C<E<lt>E<gt>>
859 filehandle, either implicitly under the C<-n> or C<-p> command-line
860 switches, or explicitly, failed for the indicated reason. Usually this
861 is because you don't have read permission for a file which you named
864 =item Can't open bidirectional pipe
866 (W) You tried to say C<open(CMD, "|cmd|")>, which is not supported. You can
867 try any of several modules in the Perl library to do this, such as
868 IPC::Open2. Alternately, direct the pipe's output to a file using "E<gt>",
869 and then read it in under a different file handle.
871 =item Can't open error file %s as stderr
873 (F) An error peculiar to VMS. Perl does its own command line redirection, and
874 couldn't open the file specified after '2E<gt>' or '2E<gt>E<gt>' on the
875 command line for writing.
877 =item Can't open input file %s as stdin
879 (F) An error peculiar to VMS. Perl does its own command line redirection, and
880 couldn't open the file specified after 'E<lt>' on the command line for reading.
882 =item Can't open output file %s as stdout
884 (F) An error peculiar to VMS. Perl does its own command line redirection, and
885 couldn't open the file specified after 'E<gt>' or 'E<gt>E<gt>' on the command
888 =item Can't open output pipe (name: %s)
890 (P) An error peculiar to VMS. Perl does its own command line redirection, and
891 couldn't open the pipe into which to send data destined for stdout.
893 =item Can't open perl script "%s": %s
895 (F) The script you specified can't be opened for the indicated reason.
897 =item Can't redefine active sort subroutine %s
899 (F) Perl optimizes the internal handling of sort subroutines and keeps
900 pointers into them. You tried to redefine one such sort subroutine when it
901 was currently active, which is not allowed. If you really want to do
902 this, you should write C<sort { &func } @x> instead of C<sort func @x>.
904 =item Can't rename %s to %s: %s, skipping file
906 (S) The rename done by the B<-i> switch failed for some reason, probably because
907 you don't have write permission to the directory.
909 =item Can't reopen input pipe (name: %s) in binary mode
911 (P) An error peculiar to VMS. Perl thought stdin was a pipe, and tried to
912 reopen it to accept binary data. Alas, it failed.
914 =item Can't reswap uid and euid
916 (P) The setreuid() call failed for some reason in the setuid emulator
919 =item Can't return outside a subroutine
921 (F) The return statement was executed in mainline code, that is, where
922 there was no subroutine call to return out of. See L<perlsub>.
924 =item Can't stat script "%s"
926 (P) For some reason you can't fstat() the script even though you have
927 it open already. Bizarre.
929 =item Can't swap uid and euid
931 (P) The setreuid() call failed for some reason in the setuid emulator
934 =item Can't take log of %g
936 (F) For ordinary real numbers, you can't take the logarithm of a
937 negative number or zero. There's a Math::Complex package that comes
938 standard with Perl, though, if you really want to do that for
939 the negative numbers.
941 =item Can't take sqrt of %g
943 (F) For ordinary real numbers, you can't take the square root of a
944 negative number. There's a Math::Complex package that comes standard
945 with Perl, though, if you really want to do that.
947 =item Can't undef active subroutine
949 (F) You can't undefine a routine that's currently running. You can,
950 however, redefine it while it's running, and you can even undef the
951 redefined subroutine while the old routine is running. Go figure.
955 (F) You tried to unshift an "unreal" array that can't be unshifted, such
956 as the main Perl stack.
958 =item Can't upgrade that kind of scalar
960 (P) The internal sv_upgrade routine adds "members" to an SV, making
961 it into a more specialized kind of SV. The top several SV types are
962 so specialized, however, that they cannot be interconverted. This
963 message indicates that such a conversion was attempted.
965 =item Can't upgrade to undef
967 (P) The undefined SV is the bottom of the totem pole, in the scheme
968 of upgradability. Upgrading to undef indicates an error in the
969 code calling sv_upgrade.
971 =item Can't use %%! because Errno.pm is not available
973 (F) The first time the %! hash is used, perl automatically loads the
974 Errno.pm module. The Errno module is expected to tie the %! hash to
975 provide symbolic names for C<$!> errno values.
977 =item Can't use "my %s" in sort comparison
979 (F) The global variables $a and $b are reserved for sort comparisons.
980 You mentioned $a or $b in the same line as the E<lt>=E<gt> or cmp operator,
981 and the variable had earlier been declared as a lexical variable.
982 Either qualify the sort variable with the package name, or rename the
985 =item Bad evalled substitution pattern
987 (F) You've used the /e switch to evaluate the replacement for a
988 substitution, but perl found a syntax error in the code to evaluate,
989 most likely an unexpected right brace '}'.
991 =item Can't use %s for loop variable
993 (F) Only a simple scalar variable may be used as a loop variable on a foreach.
995 =item Can't use %s ref as %s ref
997 (F) You've mixed up your reference types. You have to dereference a
998 reference of the type needed. You can use the ref() function to
999 test the type of the reference, if need be.
1001 =item Can't use \1 to mean $1 in expression
1003 (W) In an ordinary expression, backslash is a unary operator that creates
1004 a reference to its argument. The use of backslash to indicate a backreference
1005 to a matched substring is valid only as part of a regular expression pattern.
1006 Trying to do this in ordinary Perl code produces a value that prints
1007 out looking like SCALAR(0xdecaf). Use the $1 form instead.
1009 =item Can't use bareword ("%s") as %s ref while \"strict refs\" in use
1011 (F) Only hard references are allowed by "strict refs". Symbolic references
1012 are disallowed. See L<perlref>.
1014 =item Can't use string ("%s") as %s ref while "strict refs" in use
1016 (F) Only hard references are allowed by "strict refs". Symbolic references
1017 are disallowed. See L<perlref>.
1019 =item Can't use an undefined value as %s reference
1021 (F) A value used as either a hard reference or a symbolic reference must
1022 be a defined value. This helps to delurk some insidious errors.
1024 =item Can't use global %s in "my"
1026 (F) You tried to declare a magical variable as a lexical variable. This is
1027 not allowed, because the magic can be tied to only one location (namely
1028 the global variable) and it would be incredibly confusing to have
1029 variables in your program that looked like magical variables but
1032 =item Can't use subscript on %s
1034 (F) The compiler tried to interpret a bracketed expression as a
1035 subscript. But to the left of the brackets was an expression that
1036 didn't look like an array reference, or anything else subscriptable.
1038 =item Can't weaken a nonreference
1040 (F) You attempted to weaken something that was not a reference. Only
1041 references can be weakened.
1043 =item Can't x= to read-only value
1045 (F) You tried to repeat a constant value (often the undefined value) with
1046 an assignment operator, which implies modifying the value itself.
1047 Perhaps you need to copy the value to a temporary, and repeat that.
1049 =item Can't find an opnumber for "%s"
1051 (F) A string of a form C<CORE::word> was given to prototype(), but
1052 there is no builtin with the name C<word>.
1054 =item Can't resolve method `%s' overloading `%s' in package `%s'
1056 (F|P) Error resolving overloading specified by a method name (as
1057 opposed to a subroutine reference): no such method callable via the
1058 package. If method name is C<???>, this is an internal error.
1060 =item Character class [:%s:] unknown
1062 (F) The class in the character class [: :] syntax is unknown.
1064 =item Character class syntax [%s] belongs inside character classes
1066 (W) The character class constructs [: :], [= =], and [. .] go
1067 I<inside> character classes, the [] are part of the construct,
1068 for example: /[012[:alpha:]345]/. Note that the last two constructs
1069 are not currently implemented, they are placeholders for future extensions.
1071 =item Character class syntax [. .] is reserved for future extensions
1073 (W) Within regular expression character classes ([]) the syntax beginning
1074 with "[." and ending with ".]" is reserved for future extensions.
1075 If you need to represent those character sequences inside a regular
1076 expression character class, just quote the square brackets with the
1077 backslash: "\[." and ".\]".
1079 =item Character class syntax [= =] is reserved for future extensions
1081 (W) Within regular expression character classes ([]) the syntax
1082 beginning with "[=" and ending with "=]" is reserved for future extensions.
1083 If you need to represent those character sequences inside a regular
1084 expression character class, just quote the square brackets with the
1085 backslash: "\[=" and "=\]".
1087 =item chmod: mode argument is missing initial 0
1089 (W) A novice will sometimes say
1091 chmod 777, $filename
1093 not realizing that 777 will be interpreted as a decimal number, equivalent
1094 to 01411. Octal constants are introduced with a leading 0 in Perl, as in C.
1096 =item Close on unopened file E<lt>%sE<gt>
1098 (W) You tried to close a filehandle that was never opened.
1100 =item Compilation failed in require
1102 (F) Perl could not compile a file specified in a C<require> statement.
1103 Perl uses this generic message when none of the errors that it encountered
1104 were severe enough to halt compilation immediately.
1106 =item Complex regular subexpression recursion limit (%d) exceeded
1108 (W) The regular expression engine uses recursion in complex situations
1109 where back-tracking is required. Recursion depth is limited to 32766,
1110 or perhaps less in architectures where the stack cannot grow
1111 arbitrarily. ("Simple" and "medium" situations are handled without
1112 recursion and are not subject to a limit.) Try shortening the string
1113 under examination; looping in Perl code (e.g. with C<while>) rather
1114 than in the regular expression engine; or rewriting the regular
1115 expression so that it is simpler or backtracks less. (See L<perlbook>
1116 for information on I<Mastering Regular Expressions>.)
1118 =item connect() on closed fd
1120 (W) You tried to do a connect on a closed socket. Did you forget to check
1121 the return value of your socket() call? See L<perlfunc/connect>.
1123 =item Constant is not %s reference
1125 (F) A constant value (perhaps declared using the C<use constant> pragma)
1126 is being dereferenced, but it amounts to the wrong type of reference. The
1127 message indicates the type of reference that was expected. This usually
1128 indicates a syntax error in dereferencing the constant value.
1129 See L<perlsub/"Constant Functions"> and L<constant>.
1131 =item Constant subroutine %s redefined
1133 (S) You redefined a subroutine which had previously been eligible for
1134 inlining. See L<perlsub/"Constant Functions"> for commentary and
1137 =item Constant subroutine %s undefined
1139 (S) You undefined a subroutine which had previously been eligible for
1140 inlining. See L<perlsub/"Constant Functions"> for commentary and
1143 =item constant(%s): %%^H is not localized
1145 (F) When setting compile-time-lexicalized hash %^H one should set the
1146 corresponding bit of $^H as well.
1148 =item constant(%s): %s
1150 (F) Compile-time-substitutions (such as overloaded constants and
1151 character names) were not correctly set up.
1153 =item Copy method did not return a reference
1155 (F) The method which overloads "=" is buggy. See L<overload/Copy Constructor>.
1157 =item Corrupt malloc ptr 0x%lx at 0x%lx
1159 (P) The malloc package that comes with Perl had an internal failure.
1161 =item corrupted regexp pointers
1163 (P) The regular expression engine got confused by what the regular
1164 expression compiler gave it.
1166 =item corrupted regexp program
1168 (P) The regular expression engine got passed a regexp program without
1169 a valid magic number.
1171 =item Deep recursion on subroutine "%s"
1173 (W) This subroutine has called itself (directly or indirectly) 100
1174 times more than it has returned. This probably indicates an infinite
1175 recursion, unless you're writing strange benchmark programs, in which
1176 case it indicates something else.
1178 =item defined(@array) is deprecated
1180 (D) defined() is not usually useful on arrays because it checks for an
1181 undefined I<scalar> value. If you want to see if the array is empty,
1182 just use C<if (@array) { # not empty }> for example.
1184 =item defined(%hash) is deprecated
1186 (D) defined() is not usually useful on hashes because it checks for an
1187 undefined I<scalar> value. If you want to see if the hash is empty,
1188 just use C<if (%hash) { # not empty }> for example.
1190 =item Delimiter for here document is too long
1192 (F) In a here document construct like C<E<lt>E<lt>FOO>, the label
1193 C<FOO> is too long for Perl to handle. You have to be seriously
1194 twisted to write code that triggers this error.
1196 =item Did you mean &%s instead?
1198 (W) You probably referred to an imported subroutine &FOO as $FOO or some such.
1200 =item Did you mean $ or @ instead of %?
1202 (W) You probably said %hash{$key} when you meant $hash{$key} or @hash{@keys}.
1203 On the other hand, maybe you just meant %hash and got carried away.
1207 (F) You passed die() an empty string (the equivalent of C<die "">) or
1208 you called it with no args and both C<$@> and C<$_> were empty.
1210 =item Do you need to predeclare %s?
1212 (S) This is an educated guess made in conjunction with the message "%s
1213 found where operator expected". It often means a subroutine or module
1214 name is being referenced that hasn't been declared yet. This may be
1215 because of ordering problems in your file, or because of a missing
1216 "sub", "package", "require", or "use" statement. If you're
1217 referencing something that isn't defined yet, you don't actually have
1218 to define the subroutine or package before the current location. You
1219 can use an empty "sub foo;" or "package FOO;" to enter a "forward"
1222 =item Don't know how to handle magic of type '%s'
1224 (P) The internal handling of magical variables has been cursed.
1226 =item do_study: out of memory
1228 (P) This should have been caught by safemalloc() instead.
1230 =item Duplicate free() ignored
1232 (S) An internal routine called free() on something that had already
1235 =item elseif should be elsif
1237 (S) There is no keyword "elseif" in Perl because Larry thinks it's
1238 ugly. Your code will be interpreted as an attempt to call a method
1239 named "elseif" for the class returned by the following block. This is
1240 unlikely to be what you want.
1242 =item END failed--cleanup aborted
1244 (F) An untrapped exception was raised while executing an END subroutine.
1245 The interpreter is immediately exited.
1247 =item entering effective %s failed
1249 (F) While under the C<use filetest> pragma, switching the real and
1250 effective uids or gids failed.
1252 =item Error converting file specification %s
1254 (F) An error peculiar to VMS. Because Perl may have to deal with file
1255 specifications in either VMS or Unix syntax, it converts them to a
1256 single form when it must operate on them directly. Either you've
1257 passed an invalid file specification to Perl, or you've found a
1258 case the conversion routines don't handle. Drat.
1260 =item %s: Eval-group in insecure regular expression
1262 (F) Perl detected tainted data when trying to compile a regular expression
1263 that contains the C<(?{ ... })> zero-width assertion, which is unsafe.
1264 See L<perlre/(?{ code })>, and L<perlsec>.
1266 =item %s: Eval-group not allowed, use re 'eval'
1268 (F) A regular expression contained the C<(?{ ... })> zero-width assertion,
1269 but that construct is only allowed when the C<use re 'eval'> pragma is
1270 in effect. See L<perlre/(?{ code })>.
1272 =item %s: Eval-group not allowed at run time
1274 (F) Perl tried to compile a regular expression containing the C<(?{ ... })>
1275 zero-width assertion at run time, as it would when the pattern contains
1276 interpolated values. Since that is a security risk, it is not allowed.
1277 If you insist, you may still do this by explicitly building the pattern
1278 from an interpolated string at run time and using that in an eval().
1279 See L<perlre/(?{ code })>.
1281 =item Excessively long <> operator
1283 (F) The contents of a <> operator may not exceed the maximum size of a
1284 Perl identifier. If you're just trying to glob a long list of
1285 filenames, try using the glob() operator, or put the filenames into a
1286 variable and glob that.
1288 =item Execution of %s aborted due to compilation errors
1290 (F) The final summary message when a Perl compilation fails.
1292 =item Exiting eval via %s
1294 (W) You are exiting an eval by unconventional means, such as
1295 a goto, or a loop control statement.
1297 =item Exiting pseudo-block via %s
1299 (W) You are exiting a rather special block construct (like a sort block or
1300 subroutine) by unconventional means, such as a goto, or a loop control
1301 statement. See L<perlfunc/sort>.
1303 =item Exiting subroutine via %s
1305 (W) You are exiting a subroutine by unconventional means, such as
1306 a goto, or a loop control statement.
1308 =item Exiting substitution via %s
1310 (W) You are exiting a substitution by unconventional means, such as
1311 a return, a goto, or a loop control statement.
1313 =item Explicit blessing to '' (assuming package main)
1315 (W) You are blessing a reference to a zero length string. This has
1316 the effect of blessing the reference into the package main. This is
1317 usually not what you want. Consider providing a default target
1318 package, e.g. bless($ref, $p || 'MyPackage');
1320 =item Fatal VMS error at %s, line %d
1322 (P) An error peculiar to VMS. Something untoward happened in a VMS system
1323 service or RTL routine; Perl's exit status should provide more details. The
1324 filename in "at %s" and the line number in "line %d" tell you which section of
1325 the Perl source code is distressed.
1327 =item fcntl is not implemented
1329 (F) Your machine apparently doesn't implement fcntl(). What is this, a
1330 PDP-11 or something?
1332 =item Filehandle %s never opened
1334 (W) An I/O operation was attempted on a filehandle that was never initialized.
1335 You need to do an open() or a socket() call, or call a constructor from
1336 the FileHandle package.
1338 =item Filehandle %s opened only for input
1340 (W) You tried to write on a read-only filehandle. If you
1341 intended it to be a read-write filehandle, you needed to open it with
1342 "+E<lt>" or "+E<gt>" or "+E<gt>E<gt>" instead of with "E<lt>" or nothing. If
1343 you intended only to write the file, use "E<gt>" or "E<gt>E<gt>". See
1346 =item Filehandle %s opened only for output
1348 (W) You tried to read from a filehandle opened only for writing. If you
1349 intended it to be a read-write filehandle, you needed to open it with
1350 "+E<lt>" or "+E<gt>" or "+E<gt>E<gt>" instead of with "E<lt>" or nothing. If
1351 you intended only to read from the file, use "E<lt>". See
1354 =item Final $ should be \$ or $name
1356 (F) You must now decide whether the final $ in a string was meant to be
1357 a literal dollar sign, or was meant to introduce a variable name
1358 that happens to be missing. So you have to put either the backslash or
1361 =item Final @ should be \@ or @name
1363 (F) You must now decide whether the final @ in a string was meant to be
1364 a literal "at" sign, or was meant to introduce a variable name
1365 that happens to be missing. So you have to put either the backslash or
1368 =item Format %s redefined
1370 (W) You redefined a format. To suppress this warning, say
1374 eval "format NAME =...";
1377 =item Format not terminated
1379 (F) A format must be terminated by a line with a solitary dot. Perl got
1380 to the end of your file without finding such a line.
1382 =item Found = in conditional, should be ==
1392 (or something like that).
1394 =item gdbm store returned %d, errno %d, key "%s"
1396 (S) A warning from the GDBM_File extension that a store failed.
1398 =item gethostent not implemented
1400 (F) Your C library apparently doesn't implement gethostent(), probably
1401 because if it did, it'd feel morally obligated to return every hostname
1404 =item get{sock,peer}name() on closed fd
1406 (W) You tried to get a socket or peer socket name on a closed socket.
1407 Did you forget to check the return value of your socket() call?
1409 =item getpwnam returned invalid UIC %#o for user "%s"
1411 (S) A warning peculiar to VMS. The call to C<sys$getuai> underlying the
1412 C<getpwnam> operator returned an invalid UIC.
1414 =item Glob not terminated
1416 (F) The lexer saw a left angle bracket in a place where it was expecting
1417 a term, so it's looking for the corresponding right angle bracket, and not
1418 finding it. Chances are you left some needed parentheses out earlier in
1419 the line, and you really meant a "less than".
1421 =item Global symbol "%s" requires explicit package name
1423 (F) You've said "use strict vars", which indicates that all variables
1424 must either be lexically scoped (using "my"), or explicitly qualified to
1425 say which package the global variable is in (using "::").
1427 =item goto must have label
1429 (F) Unlike with "next" or "last", you're not allowed to goto an
1430 unspecified destination. See L<perlfunc/goto>.
1432 =item Had to create %s unexpectedly
1434 (S) A routine asked for a symbol from a symbol table that ought to have
1435 existed already, but for some reason it didn't, and had to be created on
1436 an emergency basis to prevent a core dump.
1438 =item Hash %%s missing the % in argument %d of %s()
1440 (D) Really old Perl let you omit the % on hash names in some spots. This
1441 is now heavily deprecated.
1443 =item Hexadecimal number > 0xffffffff non-portable
1445 (W) The hexadecimal number you specified is larger than 2**32-1
1446 (4294967295) and therefore non-portable between systems. See
1447 L<perlport> for more on portability concerns.
1449 =item Identifier too long
1451 (F) Perl limits identifiers (names for variables, functions, etc.) to
1452 about 250 characters for simple names, and somewhat more for compound
1453 names (like C<$A::B>). You've exceeded Perl's limits. Future
1454 versions of Perl are likely to eliminate these arbitrary limitations.
1456 =item Ill-formed CRTL environ value "%s"
1458 (W) A warning peculiar to VMS. Perl tried to read the CRTL's internal
1459 environ array, and encountered an element without the C<=> delimiter
1460 used to spearate keys from values. The element is ignored.
1462 =item Ill-formed message in prime_env_iter: |%s|
1464 (W) A warning peculiar to VMS. Perl tried to read a logical name
1465 or CLI symbol definition when preparing to iterate over %ENV, and
1466 didn't see the expected delimiter between key and value, so the
1469 =item Illegal character %s (carriage return)
1471 (F) A carriage return character was found in the input. This is an
1472 error, and not a warning, because carriage return characters can break
1473 multi-line strings, including here documents (e.g., C<print E<lt>E<lt>EOF;>).
1475 Under Unix, this error is usually caused by executing Perl code --
1476 either the main program, a module, or an eval'd string -- that was
1477 transferred over a network connection from a non-Unix system without
1478 properly converting the text file format.
1480 Under systems that use something other than '\n' to delimit lines of
1481 text, this error can also be caused by reading Perl code from a file
1482 handle that is in binary mode (as set by the C<binmode> operator).
1484 In either case, the Perl code in question will probably need to be
1485 converted with something like C<s/\x0D\x0A?/\n/g> before it can be
1488 =item Illegal division by zero
1490 (F) You tried to divide a number by 0. Either something was wrong in your
1491 logic, or you need to put a conditional in to guard against meaningless input.
1493 =item Illegal modulus zero
1495 (F) You tried to divide a number by 0 to get the remainder. Most numbers
1496 don't take to this kindly.
1498 =item Illegal binary digit %s
1500 (F) You used a digit other than 0 and 1 in a binary number.
1502 =item Illegal octal digit %s
1504 (F) You used an 8 or 9 in a octal number.
1506 =item Illegal binary digit %s ignored
1508 (W) You may have tried to use a digit other than 0 or 1 in a binary number.
1509 Interpretation of the binary number stopped before the offending digit.
1511 =item Illegal octal digit %s ignored
1513 (W) You may have tried to use an 8 or 9 in a octal number. Interpretation
1514 of the octal number stopped before the 8 or 9.
1516 =item Illegal hexadecimal digit %s ignored
1518 (W) You may have tried to use a character other than 0 - 9 or A - F, a - f
1519 in a hexadecimal number. Interpretation of the hexadecimal number stopped
1520 before the illegal character.
1522 =item Illegal switch in PERL5OPT: %s
1524 (X) The PERL5OPT environment variable may only be used to set the
1525 following switches: B<-[DIMUdmw]>.
1527 =item In string, @%s now must be written as \@%s
1529 (F) It used to be that Perl would try to guess whether you wanted an
1530 array interpolated or a literal @. It did this when the string was first
1531 used at runtime. Now strings are parsed at compile time, and ambiguous
1532 instances of @ must be disambiguated, either by prepending a backslash to
1533 indicate a literal, or by declaring (or using) the array within the
1534 program before the string (lexically). (Someday it will simply assume
1535 that an unbackslashed @ interpolates an array.)
1537 =item Insecure dependency in %s
1539 (F) You tried to do something that the tainting mechanism didn't like.
1540 The tainting mechanism is turned on when you're running setuid or setgid,
1541 or when you specify B<-T> to turn it on explicitly. The tainting mechanism
1542 labels all data that's derived directly or indirectly from the user,
1543 who is considered to be unworthy of your trust. If any such data is
1544 used in a "dangerous" operation, you get this error. See L<perlsec>
1545 for more information.
1547 =item Insecure directory in %s
1549 (F) You can't use system(), exec(), or a piped open in a setuid or setgid
1550 script if C<$ENV{PATH}> contains a directory that is writable by the world.
1553 =item Insecure $ENV{%s} while running %s
1555 (F) You can't use system(), exec(), or a piped open in a setuid or
1556 setgid script if any of C<$ENV{PATH}>, C<$ENV{IFS}>, C<$ENV{CDPATH}>,
1557 C<$ENV{ENV}> or C<$ENV{BASH_ENV}> are derived from data supplied (or
1558 potentially supplied) by the user. The script must set the path to a
1559 known value, using trustworthy data. See L<perlsec>.
1561 =item Integer overflow in %s number
1563 (W) The hexadecimal, octal or binary number you have specified either
1564 as a literal in your code or as a scalar is too big for your
1565 architecture, and has been converted to a floating point number. On a
1566 32-bit architecture the largest hexadecimal, octal or binary number
1567 representable without overflow is 0xFFFFFFFF, 037777777777, or
1568 0b11111111111111111111111111111111 respectively. Note that Perl
1569 transparently promotes all numbers to a floating point representation
1570 internally--subject to loss of precision errors in subsequent
1573 =item Internal inconsistency in tracking vforks
1575 (S) A warning peculiar to VMS. Perl keeps track of the number
1576 of times you've called C<fork> and C<exec>, to determine
1577 whether the current call to C<exec> should affect the current
1578 script or a subprocess (see L<perlvms/"exec LIST">). Somehow, this count
1579 has become scrambled, so Perl is making a guess and treating
1580 this C<exec> as a request to terminate the Perl script
1581 and execute the specified command.
1583 =item internal disaster in regexp
1585 (P) Something went badly wrong in the regular expression parser.
1587 =item glob failed (%s)
1589 (W) Something went wrong with the external program(s) used for C<glob>
1590 and C<E<lt>*.cE<gt>>. Usually, this means that you supplied a C<glob>
1591 pattern that caused the external program to fail and exit with a nonzero
1592 status. If the message indicates that the abnormal exit resulted in a
1593 coredump, this may also mean that your csh (C shell) is broken. If so,
1594 you should change all of the csh-related variables in config.sh: If you
1595 have tcsh, make the variables refer to it as if it were csh (e.g.
1596 C<full_csh='/usr/bin/tcsh'>); otherwise, make them all empty (except that
1597 C<d_csh> should be C<'undef'>) so that Perl will think csh is missing.
1598 In either case, after editing config.sh, run C<./Configure -S> and
1601 =item internal urp in regexp at /%s/
1603 (P) Something went badly awry in the regular expression parser.
1605 =item invalid [] range in regexp
1607 (F) The range specified in a character class had a minimum character
1608 greater than the maximum character, or the range didn't start/end with
1609 a literal character. See L<perlre>.
1611 =item Invalid conversion in %s: "%s"
1613 (W) Perl does not understand the given format conversion.
1614 See L<perlfunc/sprintf>.
1616 =item Invalid type in pack: '%s'
1618 (F) The given character is not a valid pack type. See L<perlfunc/pack>.
1619 (W) The given character is not a valid pack type but used to be silently
1622 =item Invalid type in unpack: '%s'
1624 (F) The given character is not a valid unpack type. See L<perlfunc/unpack>.
1625 (W) The given character is not a valid unpack type but used to be silently
1628 =item ioctl is not implemented
1630 (F) Your machine apparently doesn't implement ioctl(), which is pretty
1631 strange for a machine that supports C.
1633 =item junk on end of regexp
1635 (P) The regular expression parser is confused.
1637 =item Label not found for "last %s"
1639 (F) You named a loop to break out of, but you're not currently in a
1640 loop of that name, not even if you count where you were called from.
1641 See L<perlfunc/last>.
1643 =item Label not found for "next %s"
1645 (F) You named a loop to continue, but you're not currently in a loop of
1646 that name, not even if you count where you were called from. See
1649 =item Label not found for "redo %s"
1651 (F) You named a loop to restart, but you're not currently in a loop of
1652 that name, not even if you count where you were called from. See
1655 =item leaving effective %s failed
1657 (F) While under the C<use filetest> pragma, switching the real and
1658 effective uids or gids failed.
1660 =item listen() on closed fd
1662 (W) You tried to do a listen on a closed socket. Did you forget to check
1663 the return value of your socket() call? See L<perlfunc/listen>.
1665 =item Method for operation %s not found in package %s during blessing
1667 (F) An attempt was made to specify an entry in an overloading table that
1668 doesn't resolve to a valid subroutine. See L<overload>.
1670 =item Might be a runaway multi-line %s string starting on line %d
1672 (S) An advisory indicating that the previous error may have been caused
1673 by a missing delimiter on a string or pattern, because it eventually
1674 ended earlier on the current line.
1676 =item Misplaced _ in number
1678 (W) An underline in a decimal constant wasn't on a 3-digit boundary.
1680 =item Missing $ on loop variable
1682 (F) Apparently you've been programming in B<csh> too much. Variables are always
1683 mentioned with the $ in Perl, unlike in the shells, where it can vary from
1684 one line to the next.
1686 =item Missing %sbrace%s on \C{}
1688 (F) Wrong syntax of character name literal C<\C{charname}> within
1689 double-quotish context.
1691 =item Missing comma after first argument to %s function
1693 (F) While certain functions allow you to specify a filehandle or an
1694 "indirect object" before the argument list, this ain't one of them.
1696 =item Missing command in piped open
1698 (W) You used the C<open(FH, "| command")> or C<open(FH, "command |")>
1699 construction, but the command was missing or blank.
1701 =item Missing operator before %s?
1703 (S) This is an educated guess made in conjunction with the message "%s
1704 found where operator expected". Often the missing operator is a comma.
1706 =item Missing right curly or square bracket
1708 (F) The lexer counted more opening curly or square brackets than
1709 closing ones. As a general rule, you'll find it's missing near the place
1710 you were last editing.
1712 =item Modification of a read-only value attempted
1714 (F) You tried, directly or indirectly, to change the value of a
1715 constant. You didn't, of course, try "2 = 1", because the compiler
1716 catches that. But an easy way to do the same thing is:
1718 sub mod { $_[0] = 1 }
1721 Another way is to assign to a substr() that's off the end of the string.
1723 =item Modification of non-creatable array value attempted, subscript %d
1725 (F) You tried to make an array value spring into existence, and the
1726 subscript was probably negative, even counting from end of the array
1729 =item Modification of non-creatable hash value attempted, subscript "%s"
1731 (P) You tried to make a hash value spring into existence, and it couldn't
1732 be created for some peculiar reason.
1734 =item Module name must be constant
1736 (F) Only a bare module name is allowed as the first argument to a "use".
1738 =item msg%s not implemented
1740 (F) You don't have System V message IPC on your system.
1742 =item Multidimensional syntax %s not supported
1744 (W) Multidimensional arrays aren't written like C<$foo[1,2,3]>. They're written
1745 like C<$foo[1][2][3]>, as in C.
1747 =item Name "%s::%s" used only once: possible typo
1749 (W) Typographical errors often show up as unique variable names.
1750 If you had a good reason for having a unique name, then just mention
1751 it again somehow to suppress the message. The C<use vars> pragma is
1752 provided for just this purpose.
1754 =item Negative length
1756 (F) You tried to do a read/write/send/recv operation with a buffer length
1757 that is less than 0. This is difficult to imagine.
1759 =item nested *?+ in regexp
1761 (F) You can't quantify a quantifier without intervening parentheses. So
1762 things like ** or +* or ?* are illegal.
1764 Note, however, that the minimal matching quantifiers, C<*?>, C<+?>, and C<??> appear
1765 to be nested quantifiers, but aren't. See L<perlre>.
1769 (F) The setuid emulator requires that scripts have a well-formed #! line
1770 even on machines that don't support the #! construct.
1772 =item No %s allowed while running setuid
1774 (F) Certain operations are deemed to be too insecure for a setuid or setgid
1775 script to even be allowed to attempt. Generally speaking there will be
1776 another way to do what you want that is, if not secure, at least securable.
1779 =item No B<-e> allowed in setuid scripts
1781 (F) A setuid script can't be specified by the user.
1783 =item No comma allowed after %s
1785 (F) A list operator that has a filehandle or "indirect object" is not
1786 allowed to have a comma between that and the following arguments.
1787 Otherwise it'd be just another one of the arguments.
1789 One possible cause for this is that you expected to have imported a
1790 constant to your name space with B<use> or B<import> while no such
1791 importing took place, it may for example be that your operating system
1792 does not support that particular constant. Hopefully you did use an
1793 explicit import list for the constants you expect to see, please see
1794 L<perlfunc/use> and L<perlfunc/import>. While an explicit import list
1795 would probably have caught this error earlier it naturally does not
1796 remedy the fact that your operating system still does not support that
1797 constant. Maybe you have a typo in the constants of the symbol import
1798 list of B<use> or B<import> or in the constant name at the line where
1799 this error was triggered?
1801 =item No command into which to pipe on command line
1803 (F) An error peculiar to VMS. Perl handles its own command line redirection,
1804 and found a '|' at the end of the command line, so it doesn't know where you
1805 want to pipe the output from this command.
1807 =item No DB::DB routine defined
1809 (F) The currently executing code was compiled with the B<-d> switch,
1810 but for some reason the perl5db.pl file (or some facsimile thereof)
1811 didn't define a routine to be called at the beginning of each
1812 statement. Which is odd, because the file should have been required
1813 automatically, and should have blown up the require if it didn't parse
1816 =item No dbm on this machine
1818 (P) This is counted as an internal error, because every machine should
1819 supply dbm nowadays, because Perl comes with SDBM. See L<SDBM_File>.
1821 =item No DBsub routine
1823 (F) The currently executing code was compiled with the B<-d> switch,
1824 but for some reason the perl5db.pl file (or some facsimile thereof)
1825 didn't define a DB::sub routine to be called at the beginning of each
1826 ordinary subroutine call.
1828 =item No error file after 2E<gt> or 2E<gt>E<gt> on command line
1830 (F) An error peculiar to VMS. Perl handles its own command line redirection,
1831 and found a '2E<gt>' or a '2E<gt>E<gt>' on the command line, but can't find
1832 the name of the file to which to write data destined for stderr.
1834 =item No input file after E<lt> on command line
1836 (F) An error peculiar to VMS. Perl handles its own command line redirection,
1837 and found a 'E<lt>' on the command line, but can't find the name of the file
1838 from which to read data for stdin.
1840 =item No output file after E<gt> on command line
1842 (F) An error peculiar to VMS. Perl handles its own command line redirection,
1843 and found a lone 'E<gt>' at the end of the command line, so it doesn't know
1844 where you wanted to redirect stdout.
1846 =item No output file after E<gt> or E<gt>E<gt> on command line
1848 (F) An error peculiar to VMS. Perl handles its own command line redirection,
1849 and found a 'E<gt>' or a 'E<gt>E<gt>' on the command line, but can't find the
1850 name of the file to which to write data destined for stdout.
1852 =item No Perl script found in input
1854 (F) You called C<perl -x>, but no line was found in the file beginning
1855 with #! and containing the word "perl".
1857 =item No setregid available
1859 (F) Configure didn't find anything resembling the setregid() call for
1862 =item No setreuid available
1864 (F) Configure didn't find anything resembling the setreuid() call for
1867 =item No space allowed after B<-I>
1869 (F) The argument to B<-I> must follow the B<-I> immediately with no
1872 =item No such array field
1874 (F) You tried to access an array as a hash, but the field name used is
1875 not defined. The hash at index 0 should map all valid field names to
1876 array indices for that to work.
1878 =item No such field "%s" in variable %s of type %s
1880 (F) You tried to access a field of a typed variable where the type
1881 does not know about the field name. The field names are looked up in
1882 the %FIELDS hash in the type package at compile time. The %FIELDS hash
1883 is usually set up with the 'fields' pragma.
1885 =item No such pipe open
1887 (P) An error peculiar to VMS. The internal routine my_pclose() tried to
1888 close a pipe which hadn't been opened. This should have been caught earlier as
1889 an attempt to close an unopened filehandle.
1891 =item No such signal: SIG%s
1893 (W) You specified a signal name as a subscript to %SIG that was not recognized.
1894 Say C<kill -l> in your shell to see the valid signal names on your system.
1896 =item no UTC offset information; assuming local time is UTC
1898 (S) A warning peculiar to VMS. Perl was unable to find the local
1899 timezone offset, so it's assuming that local system time is equivalent
1900 to UTC. If it's not, define the logical name F<SYS$TIMEZONE_DIFFERENTIAL>
1901 to translate to the number of seconds which need to be added to UTC to
1904 =item Not a CODE reference
1906 (F) Perl was trying to evaluate a reference to a code value (that is, a
1907 subroutine), but found a reference to something else instead. You can
1908 use the ref() function to find out what kind of ref it really was.
1909 See also L<perlref>.
1911 =item Not a format reference
1913 (F) I'm not sure how you managed to generate a reference to an anonymous
1914 format, but this indicates you did, and that it didn't exist.
1916 =item Not a GLOB reference
1918 (F) Perl was trying to evaluate a reference to a "typeglob" (that is,
1919 a symbol table entry that looks like C<*foo>), but found a reference to
1920 something else instead. You can use the ref() function to find out
1921 what kind of ref it really was. See L<perlref>.
1923 =item Not a HASH reference
1925 (F) Perl was trying to evaluate a reference to a hash value, but
1926 found a reference to something else instead. You can use the ref()
1927 function to find out what kind of ref it really was. See L<perlref>.
1929 =item Not a perl script
1931 (F) The setuid emulator requires that scripts have a well-formed #! line
1932 even on machines that don't support the #! construct. The line must
1935 =item Not a SCALAR reference
1937 (F) Perl was trying to evaluate a reference to a scalar value, but
1938 found a reference to something else instead. You can use the ref()
1939 function to find out what kind of ref it really was. See L<perlref>.
1941 =item Not a subroutine reference
1943 (F) Perl was trying to evaluate a reference to a code value (that is, a
1944 subroutine), but found a reference to something else instead. You can
1945 use the ref() function to find out what kind of ref it really was.
1946 See also L<perlref>.
1948 =item Not a subroutine reference in overload table
1950 (F) An attempt was made to specify an entry in an overloading table that
1951 doesn't somehow point to a valid subroutine. See L<overload>.
1953 =item Not an ARRAY reference
1955 (F) Perl was trying to evaluate a reference to an array value, but
1956 found a reference to something else instead. You can use the ref()
1957 function to find out what kind of ref it really was. See L<perlref>.
1959 =item Not enough arguments for %s
1961 (F) The function requires more arguments than you specified.
1963 =item Not enough format arguments
1965 (W) A format specified more picture fields than the next line supplied.
1968 =item Null filename used
1970 (F) You can't require the null filename, especially because on many machines
1971 that means the current directory! See L<perlfunc/require>.
1973 =item Null picture in formline
1975 (F) The first argument to formline must be a valid format picture
1976 specification. It was found to be empty, which probably means you
1977 supplied it an uninitialized value. See L<perlform>.
1979 =item NULL OP IN RUN
1981 (P) Some internal routine called run() with a null opcode pointer.
1985 (P) An attempt was made to realloc NULL.
1987 =item NULL regexp argument
1989 (P) The internal pattern matching routines blew it big time.
1991 =item NULL regexp parameter
1993 (P) The internal pattern matching routines are out of their gourd.
1995 =item Number too long
1997 (F) Perl limits the representation of decimal numbers in programs to about
1998 about 250 characters. You've exceeded that length. Future versions of
1999 Perl are likely to eliminate this arbitrary limitation. In the meantime,
2000 try using scientific notation (e.g. "1e6" instead of "1_000_000").
2002 =item Octal number > 037777777777 non-portable
2004 (W) The octal number you specified is larger than 2**32-1 (4294967295)
2005 and therefore non-portable between systems. See L<perlport> for more
2006 on portability concerns.
2008 See also L<perlport> for writing portable code.
2010 =item Odd number of elements in hash assignment
2012 (S) You specified an odd number of elements to initialize a hash, which
2013 is odd, because hashes come in key/value pairs.
2015 =item Offset outside string
2017 (F) You tried to do a read/write/send/recv operation with an offset
2018 pointing outside the buffer. This is difficult to imagine.
2019 The sole exception to this is that C<sysread()>ing past the buffer
2020 will extend the buffer and zero pad the new area.
2024 (S) An internal warning that the grammar is screwed up.
2028 (S) An internal warning that the grammar is screwed up.
2030 =item Operation `%s': no method found, %s
2032 (F) An attempt was made to perform an overloaded operation for which
2033 no handler was defined. While some handlers can be autogenerated in
2034 terms of other handlers, there is no default handler for any
2035 operation, unless C<fallback> overloading key is specified to be
2036 true. See L<overload>.
2038 =item Operator or semicolon missing before %s
2040 (S) You used a variable or subroutine call where the parser was
2041 expecting an operator. The parser has assumed you really meant
2042 to use an operator, but this is highly likely to be incorrect.
2043 For example, if you say "*foo *foo" it will be interpreted as
2044 if you said "*foo * 'foo'".
2046 =item Out of memory for yacc stack
2048 (F) The yacc parser wanted to grow its stack so it could continue parsing,
2049 but realloc() wouldn't give it more memory, virtual or otherwise.
2051 =item Out of memory during request for %s
2053 (X|F) The malloc() function returned 0, indicating there was insufficient
2054 remaining memory (or virtual memory) to satisfy the request.
2056 The request was judged to be small, so the possibility to trap it
2057 depends on the way perl was compiled. By default it is not trappable.
2058 However, if compiled for this, Perl may use the contents of C<$^M> as
2059 an emergency pool after die()ing with this message. In this case the
2060 error is trappable I<once>.
2062 =item Out of memory during "large" request for %s
2064 (F) The malloc() function returned 0, indicating there was insufficient
2065 remaining memory (or virtual memory) to satisfy the request. However,
2066 the request was judged large enough (compile-time default is 64K), so
2067 a possibility to shut down by trapping this error is granted.
2069 =item Out of memory during ridiculously large request
2071 (F) You can't allocate more than 2^31+"small amount" bytes. This error
2072 is most likely to be caused by a typo in the Perl program. e.g., C<$arr[time]>
2073 instead of C<$arr[$time]>.
2077 (W) A single call to write() produced more lines than can fit on a page.
2080 =item panic: ck_grep
2082 (P) Failed an internal consistency check trying to compile a grep.
2084 =item panic: ck_split
2086 (P) Failed an internal consistency check trying to compile a split.
2088 =item panic: corrupt saved stack index
2090 (P) The savestack was requested to restore more localized values than there
2091 are in the savestack.
2093 =item panic: del_backref
2095 (P) Failed an internal consistency check while trying to reset a weak
2100 (P) We popped the context stack to an eval context, and then discovered
2101 it wasn't an eval context.
2103 =item panic: do_match
2105 (P) The internal pp_match() routine was called with invalid operational data.
2107 =item panic: do_split
2109 (P) Something terrible went wrong in setting up for the split.
2111 =item panic: do_subst
2113 (P) The internal pp_subst() routine was called with invalid operational data.
2115 =item panic: do_trans
2117 (P) The internal do_trans() routine was called with invalid operational data.
2121 (P) The library function frexp() failed, making printf("%f") impossible.
2125 (P) We popped the context stack to a context with the specified label,
2126 and then discovered it wasn't a context we know how to do a goto in.
2128 =item panic: INTERPCASEMOD
2130 (P) The lexer got into a bad state at a case modifier.
2132 =item panic: INTERPCONCAT
2134 (P) The lexer got into a bad state parsing a string with brackets.
2136 =item panic: kid popen errno read
2138 (F) forked child returned an incomprehensible message about its errno.
2142 (P) We popped the context stack to a block context, and then discovered
2143 it wasn't a block context.
2145 =item panic: leave_scope clearsv
2147 (P) A writable lexical variable became read-only somehow within the scope.
2149 =item panic: leave_scope inconsistency
2151 (P) The savestack probably got out of sync. At least, there was an
2152 invalid enum on the top of it.
2156 (P) Something requested a negative number of bytes of malloc.
2158 =item panic: magic_killbackrefs
2160 (P) Failed an internal consistency check while trying to reset all weak
2161 references to an object.
2163 =item panic: mapstart
2165 (P) The compiler is screwed up with respect to the map() function.
2167 =item panic: null array
2169 (P) One of the internal array routines was passed a null AV pointer.
2171 =item panic: pad_alloc
2173 (P) The compiler got confused about which scratch pad it was allocating
2174 and freeing temporaries and lexicals from.
2176 =item panic: pad_free curpad
2178 (P) The compiler got confused about which scratch pad it was allocating
2179 and freeing temporaries and lexicals from.
2181 =item panic: pad_free po
2183 (P) An invalid scratch pad offset was detected internally.
2185 =item panic: pad_reset curpad
2187 (P) The compiler got confused about which scratch pad it was allocating
2188 and freeing temporaries and lexicals from.
2190 =item panic: pad_sv po
2192 (P) An invalid scratch pad offset was detected internally.
2194 =item panic: pad_swipe curpad
2196 (P) The compiler got confused about which scratch pad it was allocating
2197 and freeing temporaries and lexicals from.
2199 =item panic: pad_swipe po
2201 (P) An invalid scratch pad offset was detected internally.
2203 =item panic: pp_iter
2205 (P) The foreach iterator got called in a non-loop context frame.
2207 =item panic: realloc
2209 (P) Something requested a negative number of bytes of realloc.
2211 =item panic: restartop
2213 (P) Some internal routine requested a goto (or something like it), and
2214 didn't supply the destination.
2218 (P) We popped the context stack to a subroutine or eval context, and
2219 then discovered it wasn't a subroutine or eval context.
2221 =item panic: scan_num
2223 (P) scan_num() got called on something that wasn't a number.
2225 =item panic: sv_insert
2227 (P) The sv_insert() routine was told to remove more string than there
2230 =item panic: top_env
2232 (P) The compiler attempted to do a goto, or something weird like that.
2236 (P) The lexer got into a bad state while processing a case modifier.
2238 =item Parentheses missing around "%s" list
2240 (W) You said something like
2246 my ($foo, $bar) = @_;
2248 Remember that "my" and "local" bind closer than comma.
2250 =item Perl %3.3f required--this is only version %s, stopped
2252 (F) The module in question uses features of a version of Perl more recent
2253 than the currently running version. How long has it been since you upgraded,
2254 anyway? See L<perlfunc/require>.
2256 =item Permission denied
2258 (F) The setuid emulator in suidperl decided you were up to no good.
2260 =item pid %x not a child
2262 (W) A warning peculiar to VMS. Waitpid() was asked to wait for a process which
2263 isn't a subprocess of the current process. While this is fine from VMS'
2264 perspective, it's probably not what you intended.
2266 =item POSIX getpgrp can't take an argument
2268 (F) Your C compiler uses POSIX getpgrp(), which takes no argument, unlike
2269 the BSD version, which takes a pid.
2271 =item Possible attempt to put comments in qw() list
2273 (W) qw() lists contain items separated by whitespace; as with literal
2274 strings, comment characters are not ignored, but are instead treated
2275 as literal data. (You may have used different delimiters than the
2276 parentheses shown here; braces are also frequently used.)
2278 You probably wrote something like this:
2285 when you should have written this:
2292 If you really want comments, build your list the
2293 old-fashioned way, with quotes and commas:
2297 'b', # another comment
2300 =item Possible attempt to separate words with commas
2302 (W) qw() lists contain items separated by whitespace; therefore commas
2303 aren't needed to separate the items. (You may have used different
2304 delimiters than the parentheses shown here; braces are also frequently
2307 You probably wrote something like this:
2311 which puts literal commas into some of the list items. Write it without
2312 commas if you don't want them to appear in your data:
2316 =item Possible memory corruption: %s overflowed 3rd argument
2318 (F) An ioctl() or fcntl() returned more than Perl was bargaining for.
2319 Perl guesses a reasonable buffer size, but puts a sentinel byte at the
2320 end of the buffer just in case. This sentinel byte got clobbered, and
2321 Perl assumes that memory is now corrupted. See L<perlfunc/ioctl>.
2323 =item Precedence problem: open %s should be open(%s)
2325 (S) The old irregular construct
2329 is now misinterpreted as
2333 because of the strict regularization of Perl 5's grammar into unary
2334 and list operators. (The old open was a little of both.) You must
2335 put parentheses around the filehandle, or use the new "or" operator
2338 =item print on closed filehandle %s
2340 (W) The filehandle you're printing on got itself closed sometime before now.
2341 Check your logic flow.
2343 =item printf on closed filehandle %s
2345 (W) The filehandle you're writing to got itself closed sometime before now.
2346 Check your logic flow.
2348 =item Probable precedence problem on %s
2350 (W) The compiler found a bareword where it expected a conditional,
2351 which often indicates that an || or && was parsed as part of the
2352 last argument of the previous construct, for example:
2356 =item Prototype mismatch: %s vs %s
2358 (S) The subroutine being declared or defined had previously been declared
2359 or defined with a different function prototype.
2361 =item Range iterator outside integer range
2363 (F) One (or both) of the numeric arguments to the range operator ".."
2364 are outside the range which can be represented by integers internally.
2365 One possible workaround is to force Perl to use magical string
2366 increment by prepending "0" to your numbers.
2368 =item Read on closed filehandle %s
2370 (W) The filehandle you're reading from got itself closed sometime before now.
2371 Check your logic flow.
2373 =item Reallocation too large: %lx
2375 (F) You can't allocate more than 64K on an MS-DOS machine.
2377 =item Recompile perl with B<-D>DEBUGGING to use B<-D> switch
2379 (F) You can't use the B<-D> option unless the code to produce the
2380 desired output is compiled into Perl, which entails some overhead,
2381 which is why it's currently left out of your copy.
2383 =item Recursive inheritance detected in package '%s'
2385 (F) More than 100 levels of inheritance were used. Probably indicates
2386 an unintended loop in your inheritance hierarchy.
2388 =item Recursive inheritance detected while looking for method '%s' in package '%s'
2390 (F) More than 100 levels of inheritance were encountered while invoking a
2391 method. Probably indicates an unintended loop in your inheritance hierarchy.
2393 =item Reference found where even-sized list expected
2395 (W) You gave a single reference where Perl was expecting a list with
2396 an even number of elements (for assignment to a hash). This
2397 usually means that you used the anon hash constructor when you meant
2398 to use parens. In any case, a hash requires key/value B<pairs>.
2400 %hash = { one => 1, two => 2, }; # WRONG
2401 %hash = [ qw/ an anon array / ]; # WRONG
2402 %hash = ( one => 1, two => 2, ); # right
2403 %hash = qw( one 1 two 2 ); # also fine
2405 =item Reference is already weak
2407 (W) You have attempted to weaken a reference that is already weak.
2408 Doing so has no effect.
2410 =item Reference miscount in sv_replace()
2412 (W) The internal sv_replace() function was handed a new SV with a
2413 reference count of other than 1.
2415 =item regexp *+ operand could be empty
2417 (F) The part of the regexp subject to either the * or + quantifier
2418 could match an empty string.
2420 =item regexp memory corruption
2422 (P) The regular expression engine got confused by what the regular
2423 expression compiler gave it.
2425 =item regexp out of space
2427 (P) A "can't happen" error, because safemalloc() should have caught it earlier.
2429 =item Reversed %s= operator
2431 (W) You wrote your assignment operator backwards. The = must always
2432 comes last, to avoid ambiguity with subsequent unary operators.
2434 =item Runaway format
2436 (F) Your format contained the ~~ repeat-until-blank sequence, but it
2437 produced 200 lines at once, and the 200th line looked exactly like the
2438 199th line. Apparently you didn't arrange for the arguments to exhaust
2439 themselves, either by using ^ instead of @ (for scalar variables), or by
2440 shifting or popping (for array variables). See L<perlform>.
2442 =item Scalar value @%s[%s] better written as $%s[%s]
2444 (W) You've used an array slice (indicated by @) to select a single element of
2445 an array. Generally it's better to ask for a scalar value (indicated by $).
2446 The difference is that C<$foo[&bar]> always behaves like a scalar, both when
2447 assigning to it and when evaluating its argument, while C<@foo[&bar]> behaves
2448 like a list when you assign to it, and provides a list context to its
2449 subscript, which can do weird things if you're expecting only one subscript.
2451 On the other hand, if you were actually hoping to treat the array
2452 element as a list, you need to look into how references work, because
2453 Perl will not magically convert between scalars and lists for you. See
2456 =item Scalar value @%s{%s} better written as $%s{%s}
2458 (W) You've used a hash slice (indicated by @) to select a single element of
2459 a hash. Generally it's better to ask for a scalar value (indicated by $).
2460 The difference is that C<$foo{&bar}> always behaves like a scalar, both when
2461 assigning to it and when evaluating its argument, while C<@foo{&bar}> behaves
2462 like a list when you assign to it, and provides a list context to its
2463 subscript, which can do weird things if you're expecting only one subscript.
2465 On the other hand, if you were actually hoping to treat the hash
2466 element as a list, you need to look into how references work, because
2467 Perl will not magically convert between scalars and lists for you. See
2470 =item Script is not setuid/setgid in suidperl
2472 (F) Oddly, the suidperl program was invoked on a script without a setuid
2473 or setgid bit set. This doesn't make much sense.
2475 =item Search pattern not terminated
2477 (F) The lexer couldn't find the final delimiter of a // or m{}
2478 construct. Remember that bracketing delimiters count nesting level.
2479 Missing the leading C<$> from a variable C<$m> may cause this error.
2481 =item %sseek() on unopened file
2483 (W) You tried to use the seek() or sysseek() function on a filehandle that
2484 was either never opened or has since been closed.
2486 =item select not implemented
2488 (F) This machine doesn't implement the select() system call.
2490 =item sem%s not implemented
2492 (F) You don't have System V semaphore IPC on your system.
2494 =item semi-panic: attempt to dup freed string
2496 (S) The internal newSVsv() routine was called to duplicate a scalar
2497 that had previously been marked as free.
2499 =item Semicolon seems to be missing
2501 (W) A nearby syntax error was probably caused by a missing semicolon,
2502 or possibly some other missing operator, such as a comma.
2504 =item Send on closed socket
2506 (W) The filehandle you're sending to got itself closed sometime before now.
2507 Check your logic flow.
2509 =item Sequence (? incomplete
2511 (F) A regular expression ended with an incomplete extension (?.
2514 =item Sequence (?#... not terminated
2516 (F) A regular expression comment must be terminated by a closing
2517 parenthesis. Embedded parentheses aren't allowed. See L<perlre>.
2519 =item Sequence (?%s...) not implemented
2521 (F) A proposed regular expression extension has the character reserved
2522 but has not yet been written. See L<perlre>.
2524 =item Sequence (?%s...) not recognized
2526 (F) You used a regular expression extension that doesn't make sense.
2531 Also known as "500 Server error".
2533 B<This is a CGI error, not a Perl error>.
2535 You need to make sure your script is executable, is accessible by the user
2536 CGI is running the script under (which is probably not the user account you
2537 tested it under), does not rely on any environment variables (like PATH)
2538 from the user it isn't running under, and isn't in a location where the CGI
2539 server can't find it, basically, more or less. Please see the following
2540 for more information:
2542 http://www.perl.com/CPAN/doc/FAQs/cgi/idiots-guide.html
2543 http://www.perl.com/CPAN/doc/FAQs/cgi/perl-cgi-faq.html
2544 ftp://rtfm.mit.edu/pub/usenet/news.answers/www/cgi-faq
2545 http://hoohoo.ncsa.uiuc.edu/cgi/interface.html
2546 http://www-genome.wi.mit.edu/WWW/faqs/www-security-faq.html
2548 You should also look at L<perlfaq9>.
2550 =item setegid() not implemented
2552 (F) You tried to assign to C<$)>, and your operating system doesn't support
2553 the setegid() system call (or equivalent), or at least Configure didn't
2556 =item seteuid() not implemented
2558 (F) You tried to assign to C<$E<gt>>, and your operating system doesn't support
2559 the seteuid() system call (or equivalent), or at least Configure didn't
2562 =item setrgid() not implemented
2564 (F) You tried to assign to C<$(>, and your operating system doesn't support
2565 the setrgid() system call (or equivalent), or at least Configure didn't
2568 =item setruid() not implemented
2570 (F) You tried to assign to C<$E<lt>>, and your operating system doesn't support
2571 the setruid() system call (or equivalent), or at least Configure didn't
2574 =item Setuid/gid script is writable by world
2576 (F) The setuid emulator won't run a script that is writable by the world,
2577 because the world might have written on it already.
2579 =item shm%s not implemented
2581 (F) You don't have System V shared memory IPC on your system.
2583 =item shutdown() on closed fd
2585 (W) You tried to do a shutdown on a closed socket. Seems a bit superfluous.
2587 =item SIG%s handler "%s" not defined
2589 (W) The signal handler named in %SIG doesn't, in fact, exist. Perhaps you
2590 put it into the wrong package?
2592 =item sort is now a reserved word
2594 (F) An ancient error message that almost nobody ever runs into anymore.
2595 But before sort was a keyword, people sometimes used it as a filehandle.
2597 =item Sort subroutine didn't return a numeric value
2599 (F) A sort comparison routine must return a number. You probably blew
2600 it by not using C<E<lt>=E<gt>> or C<cmp>, or by not using them correctly.
2601 See L<perlfunc/sort>.
2603 =item Sort subroutine didn't return single value
2605 (F) A sort comparison subroutine may not return a list value with more
2606 or less than one element. See L<perlfunc/sort>.
2608 =item split /^/ better written as split /^/m
2610 (W) Implicit translation of /^/ to mean /^/m in split is deprecated.
2614 (P) The split was looping infinitely. (Obviously, a split shouldn't iterate
2615 more times than there are characters of input, which is what happened.)
2616 See L<perlfunc/split>.
2618 =item Stat on unopened file E<lt>%sE<gt>
2620 (W) You tried to use the stat() function (or an equivalent file test)
2621 on a filehandle that was either never opened or has since been closed.
2623 =item Statement unlikely to be reached
2625 (W) You did an exec() with some statement after it other than a die().
2626 This is almost always an error, because exec() never returns unless
2627 there was a failure. You probably wanted to use system() instead,
2628 which does return. To suppress this warning, put the exec() in a block
2631 =item Strange *+?{} on zero-length expression
2633 (W) You applied a regular expression quantifier in a place where it
2634 makes no sense, such as on a zero-width assertion.
2635 Try putting the quantifier inside the assertion instead. For example,
2636 the way to match "abc" provided that it is followed by three
2637 repetitions of "xyz" is C</abc(?=(?:xyz){3})/>, not C</abc(?=xyz){3}/>.
2639 =item Stub found while resolving method `%s' overloading `%s' in package `%s'
2641 (P) Overloading resolution over @ISA tree may be broken by importation stubs.
2642 Stubs should never be implicitely created, but explicit calls to C<can>
2645 =item Subroutine %s redefined
2647 (W) You redefined a subroutine. To suppress this warning, say
2651 eval "sub name { ... }";
2654 =item Substitution loop
2656 (P) The substitution was looping infinitely. (Obviously, a
2657 substitution shouldn't iterate more times than there are characters of
2658 input, which is what happened.) See the discussion of substitution in
2659 L<perlop/"Quote and Quote-like Operators">.
2661 =item Substitution pattern not terminated
2663 (F) The lexer couldn't find the interior delimiter of a s/// or s{}{}
2664 construct. Remember that bracketing delimiters count nesting level.
2665 Missing the leading C<$> from variable C<$s> may cause this error.
2667 =item Substitution replacement not terminated
2669 (F) The lexer couldn't find the final delimiter of a s/// or s{}{}
2670 construct. Remember that bracketing delimiters count nesting level.
2671 Missing the leading C<$> from variable C<$s> may cause this error.
2673 =item substr outside of string
2675 (S),(W) You tried to reference a substr() that pointed outside of a
2676 string. That is, the absolute value of the offset was larger than the
2677 length of the string. See L<perlfunc/substr>. This warning is
2678 mandatory if substr is used in an lvalue context (as the left hand side
2679 of an assignment or as a subroutine argument for example).
2681 =item suidperl is no longer needed since %s
2683 (F) Your Perl was compiled with B<-D>SETUID_SCRIPTS_ARE_SECURE_NOW, but a
2684 version of the setuid emulator somehow got run anyway.
2686 =item switching effective %s is not implemented
2688 (F) While under the C<use filetest> pragma, we cannot switch the
2689 real and effective uids or gids.
2693 (F) Probably means you had a syntax error. Common reasons include:
2695 A keyword is misspelled.
2696 A semicolon is missing.
2698 An opening or closing parenthesis is missing.
2699 An opening or closing brace is missing.
2700 A closing quote is missing.
2702 Often there will be another error message associated with the syntax
2703 error giving more information. (Sometimes it helps to turn on B<-w>.)
2704 The error message itself often tells you where it was in the line when
2705 it decided to give up. Sometimes the actual error is several tokens
2706 before this, because Perl is good at understanding random input.
2707 Occasionally the line number may be misleading, and once in a blue moon
2708 the only way to figure out what's triggering the error is to call
2709 C<perl -c> repeatedly, chopping away half the program each time to see
2710 if the error went away. Sort of the cybernetic version of S<20 questions>.
2712 =item syntax error at line %d: `%s' unexpected
2714 (A) You've accidentally run your script through the Bourne shell
2715 instead of Perl. Check the #! line, or manually feed your script
2718 =item System V %s is not implemented on this machine
2720 (F) You tried to do something with a function beginning with "sem",
2721 "shm", or "msg" but that System V IPC is not implemented in your
2722 machine. In some machines the functionality can exist but be
2723 unconfigured. Consult your system support.
2725 =item Syswrite on closed filehandle
2727 (W) The filehandle you're writing to got itself closed sometime before now.
2728 Check your logic flow.
2730 =item Target of goto is too deeply nested
2732 (F) You tried to use C<goto> to reach a label that was too deeply
2733 nested for Perl to reach. Perl is doing you a favor by refusing.
2735 =item tell() on unopened file
2737 (W) You tried to use the tell() function on a filehandle that was either
2738 never opened or has since been closed.
2740 =item Test on unopened file E<lt>%sE<gt>
2742 (W) You tried to invoke a file test operator on a filehandle that isn't
2743 open. Check your logic. See also L<perlfunc/-X>.
2745 =item That use of $[ is unsupported
2747 (F) Assignment to C<$[> is now strictly circumscribed, and interpreted as
2748 a compiler directive. You may say only one of
2757 This is to prevent the problem of one module changing the array base
2758 out from under another module inadvertently. See L<perlvar/$[>.
2760 =item The %s function is unimplemented
2762 The function indicated isn't implemented on this architecture, according
2763 to the probings of Configure.
2765 =item The crypt() function is unimplemented due to excessive paranoia
2767 (F) Configure couldn't find the crypt() function on your machine,
2768 probably because your vendor didn't supply it, probably because they
2769 think the U.S. Government thinks it's a secret, or at least that they
2770 will continue to pretend that it is. And if you quote me on that, I
2773 =item The stat preceding C<-l _> wasn't an lstat
2775 (F) It makes no sense to test the current stat buffer for symbolic linkhood
2776 if the last stat that wrote to the stat buffer already went past
2777 the symlink to get to the real file. Use an actual filename instead.
2779 =item This Perl can't reset CRTL eviron elements (%s)
2781 =item This Perl can't set CRTL environ elements (%s=%s)
2783 (W) Warnings peculiar to VMS. You tried to change or delete an element
2784 of the CRTL's internal environ array, but your copy of Perl wasn't
2785 built with a CRTL that contained the setenv() function. You'll need to
2786 rebuild Perl with a CRTL that does, or redefine F<PERL_ENV_TABLES> (see
2787 L<perlvms>) so that the environ array isn't the target of the change to
2788 %ENV which produced the warning.
2790 =item times not implemented
2792 (F) Your version of the C library apparently doesn't do times(). I suspect
2793 you're not running on Unix.
2795 =item Too few args to syscall
2797 (F) There has to be at least one argument to syscall() to specify the
2798 system call to call, silly dilly.
2800 =item Too late for "B<-T>" option
2802 (X) The #! line (or local equivalent) in a Perl script contains the
2803 B<-T> option, but Perl was not invoked with B<-T> in its command line.
2804 This is an error because, by the time Perl discovers a B<-T> in a
2805 script, it's too late to properly taint everything from the environment.
2808 If the Perl script is being executed as a command using the #!
2809 mechanism (or its local equivalent), this error can usually be fixed
2810 by editing the #! line so that the B<-T> option is a part of Perl's
2811 first argument: e.g. change C<perl -n -T> to C<perl -T -n>.
2813 If the Perl script is being executed as C<perl scriptname>, then the
2814 B<-T> option must appear on the command line: C<perl -T scriptname>.
2816 =item Too late for "-%s" option
2818 (X) The #! line (or local equivalent) in a Perl script contains the
2819 B<-M> or B<-m> option. This is an error because B<-M> and B<-m> options
2820 are not intended for use inside scripts. Use the C<use> pragma instead.
2826 (A) You've accidentally run your script through B<csh> instead
2827 of Perl. Check the #! line, or manually feed your script into
2830 =item Too many args to syscall
2832 (F) Perl supports a maximum of only 14 args to syscall().
2834 =item Too many arguments for %s
2836 (F) The function requires fewer arguments than you specified.
2838 =item trailing \ in regexp
2840 (F) The regular expression ends with an unbackslashed backslash. Backslash
2843 =item Transliteration pattern not terminated
2845 (F) The lexer couldn't find the interior delimiter of a tr/// or tr[][]
2846 or y/// or y[][] construct. Missing the leading C<$> from variables
2847 C<$tr> or C<$y> may cause this error.
2849 =item Transliteration replacement not terminated
2851 (F) The lexer couldn't find the final delimiter of a tr/// or tr[][]
2854 =item truncate not implemented
2856 (F) Your machine doesn't implement a file truncation mechanism that
2857 Configure knows about.
2859 =item Type of arg %d to %s must be %s (not %s)
2861 (F) This function requires the argument in that position to be of a
2862 certain type. Arrays must be @NAME or C<@{EXPR}>. Hashes must be
2863 %NAME or C<%{EXPR}>. No implicit dereferencing is allowed--use the
2864 {EXPR} forms as an explicit dereference. See L<perlref>.
2866 =item umask: argument is missing initial 0
2868 (W) A umask of 222 is incorrect. It should be 0222, because octal
2869 literals always start with 0 in Perl, as in C.
2871 =item umask not implemented
2873 (F) Your machine doesn't implement the umask function and you tried
2874 to use it to restrict permissions for yourself (EXPR & 0700).
2876 =item Unable to create sub named "%s"
2878 (F) You attempted to create or access a subroutine with an illegal name.
2880 =item Unbalanced context: %d more PUSHes than POPs
2882 (W) The exit code detected an internal inconsistency in how many execution
2883 contexts were entered and left.
2885 =item Unbalanced saves: %d more saves than restores
2887 (W) The exit code detected an internal inconsistency in how many
2888 values were temporarily localized.
2890 =item Unbalanced scopes: %d more ENTERs than LEAVEs
2892 (W) The exit code detected an internal inconsistency in how many blocks
2893 were entered and left.
2895 =item Unbalanced tmps: %d more allocs than frees
2897 (W) The exit code detected an internal inconsistency in how many mortal
2898 scalars were allocated and freed.
2900 =item Undefined format "%s" called
2902 (F) The format indicated doesn't seem to exist. Perhaps it's really in
2903 another package? See L<perlform>.
2905 =item Undefined sort subroutine "%s" called
2907 (F) The sort comparison routine specified doesn't seem to exist. Perhaps
2908 it's in a different package? See L<perlfunc/sort>.
2910 =item Undefined subroutine &%s called
2912 (F) The subroutine indicated hasn't been defined, or if it was, it
2913 has since been undefined.
2915 =item Undefined subroutine called
2917 (F) The anonymous subroutine you're trying to call hasn't been defined,
2918 or if it was, it has since been undefined.
2920 =item Undefined subroutine in sort
2922 (F) The sort comparison routine specified is declared but doesn't seem to
2923 have been defined yet. See L<perlfunc/sort>.
2925 =item Undefined top format "%s" called
2927 (F) The format indicated doesn't seem to exist. Perhaps it's really in
2928 another package? See L<perlform>.
2930 =item Undefined value assigned to typeglob
2932 (W) An undefined value was assigned to a typeglob, a la C<*foo = undef>.
2933 This does nothing. It's possible that you really mean C<undef *foo>.
2935 =item unexec of %s into %s failed!
2937 (F) The unexec() routine failed for some reason. See your local FSF
2938 representative, who probably put it there in the first place.
2940 =item Unknown BYTEORDER
2942 (F) There are no byte-swapping functions for a machine with this byte order.
2944 =item Unknown open() mode '%s'
2946 (F) The second argument of 3-arguments open is not one from the list
2947 of C<L<lt>>, C<L<gt>>, C<E<gt>E<gt>>, C<+L<lt>>, C<+L<gt>>,
2948 C<+E<gt>E<gt>>, C<-|>, C<|-> of possible open() modes.
2950 =item Unknown process %x sent message to prime_env_iter: %s
2952 (P) An error peculiar to VMS. Perl was reading values for %ENV before
2953 iterating over it, and someone else stuck a message in the stream of
2954 data Perl expected. Someone's very confused, or perhaps trying to
2955 subvert Perl's population of %ENV for nefarious purposes.
2957 =item unmatched () in regexp
2959 (F) Unbackslashed parentheses must always be balanced in regular
2960 expressions. If you're a vi user, the % key is valuable for finding
2961 the matching parenthesis. See L<perlre>.
2963 =item Unmatched right %s bracket
2965 (F) The lexer counted more closing curly or square brackets than
2966 opening ones, so you're probably missing a matching opening bracket.
2967 As a general rule, you'll find the missing one (so to speak) near the
2968 place you were last editing.
2970 =item unmatched [] in regexp
2972 (F) The brackets around a character class must match. If you wish to
2973 include a closing bracket in a character class, backslash it or put it first.
2976 =item Unquoted string "%s" may clash with future reserved word
2978 (W) You used a bareword that might someday be claimed as a reserved word.
2979 It's best to put such a word in quotes, or capitalize it somehow, or insert
2980 an underbar into it. You might also declare it as a subroutine.
2982 =item Unrecognized character %s
2984 (F) The Perl parser has no idea what to do with the specified character
2985 in your Perl script (or eval). Perhaps you tried to run a compressed
2986 script, a binary program, or a directory as a Perl program.
2988 =item Unrecognized escape \\%c passed through
2990 (W) You used a backslash-character combination which is not recognized
2993 =item Unrecognized signal name "%s"
2995 (F) You specified a signal name to the kill() function that was not recognized.
2996 Say C<kill -l> in your shell to see the valid signal names on your system.
2998 =item Unrecognized switch: -%s (-h will show valid options)
3000 (F) You specified an illegal option to Perl. Don't do that.
3001 (If you think you didn't do that, check the #! line to see if it's
3002 supplying the bad switch on your behalf.)
3004 =item Unsuccessful %s on filename containing newline
3006 (W) A file operation was attempted on a filename, and that operation
3007 failed, PROBABLY because the filename contained a newline, PROBABLY
3008 because you forgot to chop() or chomp() it off. See L<perlfunc/chomp>.
3010 =item Unsupported directory function "%s" called
3012 (F) Your machine doesn't support opendir() and readdir().
3014 =item Unsupported function fork
3016 (F) Your version of executable does not support forking.
3018 Note that under some systems, like OS/2, there may be different flavors of
3019 Perl executables, some of which may support fork, some not. Try changing
3020 the name you call Perl by to C<perl_>, C<perl__>, and so on.
3022 =item Unsupported function %s
3024 (F) This machine doesn't implement the indicated function, apparently.
3025 At least, Configure doesn't think so.
3027 =item Unsupported socket function "%s" called
3029 (F) Your machine doesn't support the Berkeley socket mechanism, or at
3030 least that's what Configure thought.
3032 =item Unterminated E<lt>E<gt> operator
3034 (F) The lexer saw a left angle bracket in a place where it was expecting
3035 a term, so it's looking for the corresponding right angle bracket, and not
3036 finding it. Chances are you left some needed parentheses out earlier in
3037 the line, and you really meant a "less than".
3039 =item Use of $# is deprecated
3041 (D) This was an ill-advised attempt to emulate a poorly defined B<awk> feature.
3042 Use an explicit printf() or sprintf() instead.
3044 =item Use of $* is deprecated
3046 (D) This variable magically turned on multi-line pattern matching, both for
3047 you and for any luckless subroutine that you happen to call. You should
3048 use the new C<//m> and C<//s> modifiers now to do that without the dangerous
3049 action-at-a-distance effects of C<$*>.
3051 =item Use of %s in printf format not supported
3053 (F) You attempted to use a feature of printf that is accessible from
3054 only C. This usually means there's a better way to do it in Perl.
3056 =item Use of bare E<lt>E<lt> to mean E<lt>E<lt>"" is deprecated
3058 (D) You are now encouraged to use the explicitly quoted form if you
3059 wish to use an empty line as the terminator of the here-document.
3061 =item Use of implicit split to @_ is deprecated
3063 (D) It makes a lot of work for the compiler when you clobber a
3064 subroutine's argument list, so it's better if you assign the results of
3065 a split() explicitly to an array (or list).
3067 =item Use of inherited AUTOLOAD for non-method %s() is deprecated
3069 (D) As an (ahem) accidental feature, C<AUTOLOAD> subroutines are looked
3070 up as methods (using the C<@ISA> hierarchy) even when the subroutines to
3071 be autoloaded were called as plain functions (e.g. C<Foo::bar()>), not
3072 as methods (e.g. C<Foo-E<gt>bar()> or C<$obj-E<gt>bar()>).
3074 This bug will be rectified in Perl 5.005, which will use method lookup
3075 only for methods' C<AUTOLOAD>s. However, there is a significant base
3076 of existing code that may be using the old behavior. So, as an
3077 interim step, Perl 5.004 issues an optional warning when non-methods
3078 use inherited C<AUTOLOAD>s.
3080 The simple rule is: Inheritance will not work when autoloading
3081 non-methods. The simple fix for old code is: In any module that used to
3082 depend on inheriting C<AUTOLOAD> for non-methods from a base class named
3083 C<BaseClass>, execute C<*AUTOLOAD = \&BaseClass::AUTOLOAD> during startup.
3085 In code that currently says C<use AutoLoader; @ISA = qw(AutoLoader);> you
3086 should remove AutoLoader from @ISA and change C<use AutoLoader;> to
3087 C<use AutoLoader 'AUTOLOAD';>.
3089 =item Use of reserved word "%s" is deprecated
3091 (D) The indicated bareword is a reserved word. Future versions of perl
3092 may use it as a keyword, so you're better off either explicitly quoting
3093 the word in a manner appropriate for its context of use, or using a
3094 different name altogether. The warning can be suppressed for subroutine
3095 names by either adding a C<&> prefix, or using a package qualifier,
3096 e.g. C<&our()>, or C<Foo::our()>.
3098 =item Use of %s is deprecated
3100 (D) The construct indicated is no longer recommended for use, generally
3101 because there's a better way to do it, and also because the old way has
3104 =item Use of uninitialized value
3106 (W) An undefined value was used as if it were already defined. It was
3107 interpreted as a "" or a 0, but maybe it was a mistake. To suppress this
3108 warning assign a defined value to your variables.
3110 =item Useless use of "re" pragma
3112 (W) You did C<use re;> without any arguments. That isn't very useful.
3114 =item Useless use of %s in void context
3116 (W) You did something without a side effect in a context that does nothing
3117 with the return value, such as a statement that doesn't return a value
3118 from a block, or the left side of a scalar comma operator. Very often
3119 this points not to stupidity on your part, but a failure of Perl to parse
3120 your program the way you thought it would. For example, you'd get this
3121 if you mixed up your C precedence with Python precedence and said
3125 when you meant to say
3127 ($one, $two) = (1, 2);
3129 Another common error is to use ordinary parentheses to construct a list
3130 reference when you should be using square or curly brackets, for
3135 when you should have said
3139 The square brackets explicitly turn a list value into a scalar value,
3140 while parentheses do not. So when a parenthesized list is evaluated in
3141 a scalar context, the comma is treated like C's comma operator, which
3142 throws away the left argument, which is not what you want. See
3143 L<perlref> for more on this.
3145 =item untie attempted while %d inner references still exist
3147 (W) A copy of the object returned from C<tie> (or C<tied>) was still
3148 valid when C<untie> was called.
3150 =item Value of %s can be "0"; test with defined()
3152 (W) In a conditional expression, you used <HANDLE>, <*> (glob), C<each()>,
3153 or C<readdir()> as a boolean value. Each of these constructs can return a
3154 value of "0"; that would make the conditional expression false, which is
3155 probably not what you intended. When using these constructs in conditional
3156 expressions, test their values with the C<defined> operator.
3158 =item Value of CLI symbol "%s" too long
3160 (W) A warning peculiar to VMS. Perl tried to read the value of an %ENV
3161 element from a CLI symbol table, and found a resultant string longer
3162 than 1024 characters. The return value has been truncated to 1024
3165 =item Variable "%s" is not imported%s
3167 (F) While "use strict" in effect, you referred to a global variable
3168 that you apparently thought was imported from another module, because
3169 something else of the same name (usually a subroutine) is exported
3170 by that module. It usually means you put the wrong funny character
3171 on the front of your variable.
3173 =item Variable "%s" may be unavailable
3175 (W) An inner (nested) I<anonymous> subroutine is inside a I<named>
3176 subroutine, and outside that is another subroutine; and the anonymous
3177 (innermost) subroutine is referencing a lexical variable defined in
3178 the outermost subroutine. For example:
3180 sub outermost { my $a; sub middle { sub { $a } } }
3182 If the anonymous subroutine is called or referenced (directly or
3183 indirectly) from the outermost subroutine, it will share the variable
3184 as you would expect. But if the anonymous subroutine is called or
3185 referenced when the outermost subroutine is not active, it will see
3186 the value of the shared variable as it was before and during the
3187 *first* call to the outermost subroutine, which is probably not what
3190 In these circumstances, it is usually best to make the middle
3191 subroutine anonymous, using the C<sub {}> syntax. Perl has specific
3192 support for shared variables in nested anonymous subroutines; a named
3193 subroutine in between interferes with this feature.
3195 =item Variable "%s" will not stay shared
3197 (W) An inner (nested) I<named> subroutine is referencing a lexical
3198 variable defined in an outer subroutine.
3200 When the inner subroutine is called, it will probably see the value of
3201 the outer subroutine's variable as it was before and during the
3202 *first* call to the outer subroutine; in this case, after the first
3203 call to the outer subroutine is complete, the inner and outer
3204 subroutines will no longer share a common value for the variable. In
3205 other words, the variable will no longer be shared.
3207 Furthermore, if the outer subroutine is anonymous and references a
3208 lexical variable outside itself, then the outer and inner subroutines
3209 will I<never> share the given variable.
3211 This problem can usually be solved by making the inner subroutine
3212 anonymous, using the C<sub {}> syntax. When inner anonymous subs that
3213 reference variables in outer subroutines are called or referenced,
3214 they are automatically rebound to the current values of such
3217 =item Variable syntax
3219 (A) You've accidentally run your script through B<csh> instead
3220 of Perl. Check the #! line, or manually feed your script into
3223 =item perl: warning: Setting locale failed.
3225 (S) The whole warning message will look something like:
3227 perl: warning: Setting locale failed.
3228 perl: warning: Please check that your locale settings:
3231 are supported and installed on your system.
3232 perl: warning: Falling back to the standard locale ("C").
3234 Exactly what were the failed locale settings varies. In the above the
3235 settings were that the LC_ALL was "En_US" and the LANG had no value.
3236 This error means that Perl detected that you and/or your system
3237 administrator have set up the so-called variable system but Perl could
3238 not use those settings. This was not dead serious, fortunately: there
3239 is a "default locale" called "C" that Perl can and will use, the
3240 script will be run. Before you really fix the problem, however, you
3241 will get the same error message each time you run Perl. How to really
3242 fix the problem can be found in L<perllocale> section B<LOCALE PROBLEMS>.
3244 =item Warning: something's wrong
3246 (W) You passed warn() an empty string (the equivalent of C<warn "">) or
3247 you called it with no args and C<$_> was empty.
3249 =item Warning: unable to close filehandle %s properly
3251 (S) The implicit close() done by an open() got an error indication on the
3252 close(). This usually indicates your file system ran out of disk space.
3254 =item Warning: Use of "%s" without parentheses is ambiguous
3256 (S) You wrote a unary operator followed by something that looks like a
3257 binary operator that could also have been interpreted as a term or
3258 unary operator. For instance, if you know that the rand function
3259 has a default argument of 1.0, and you write
3263 you may THINK you wrote the same thing as
3267 but in actual fact, you got
3271 So put in parentheses to say what you really mean.
3273 =item Write on closed filehandle %s
3275 (W) The filehandle you're writing to got itself closed sometime before now.
3276 Check your logic flow.
3278 =item X outside of string
3280 (F) You had a pack template that specified a relative position before
3281 the beginning of the string being unpacked. See L<perlfunc/pack>.
3283 =item x outside of string
3285 (F) You had a pack template that specified a relative position after
3286 the end of the string being unpacked. See L<perlfunc/pack>.
3288 =item Xsub "%s" called in sort
3290 (F) The use of an external subroutine as a sort comparison is not yet supported.
3292 =item Xsub called in sort
3294 (F) The use of an external subroutine as a sort comparison is not yet supported.
3296 =item You can't use C<-l> on a filehandle
3298 (F) A filehandle represents an opened file, and when you opened the file it
3299 already went past any symlink you are presumably trying to look for.
3300 Use a filename instead.
3302 =item YOU HAVEN'T DISABLED SET-ID SCRIPTS IN THE KERNEL YET!
3304 (F) And you probably never will, because you probably don't have the
3305 sources to your kernel, and your vendor probably doesn't give a rip
3306 about what you want. Your best bet is to use the wrapsuid script in
3307 the eg directory to put a setuid C wrapper around your script.
3309 =item You need to quote "%s"
3311 (W) You assigned a bareword as a signal handler name. Unfortunately, you
3312 already have a subroutine of that name declared, which means that Perl 5
3313 will try to call the subroutine when the assignment is executed, which is
3314 probably not what you want. (If it IS what you want, put an & in front.)
3316 =item [gs]etsockopt() on closed fd
3318 (W) You tried to get or set a socket option on a closed socket.
3319 Did you forget to check the return value of your socket() call?
3320 See L<perlfunc/getsockopt>.
3322 =item \1 better written as $1
3324 (W) Outside of patterns, backreferences live on as variables. The use
3325 of backslashes is grandfathered on the right-hand side of a
3326 substitution, but stylistically it's better to use the variable form
3327 because other Perl programmers will expect it, and it works better
3328 if there are more than 9 backreferences.
3330 =item '|' and 'E<lt>' may not both be specified on command line
3332 (F) An error peculiar to VMS. Perl does its own command line redirection, and
3333 found that STDIN was a pipe, and that you also tried to redirect STDIN using
3334 'E<lt>'. Only one STDIN stream to a customer, please.
3336 =item '|' and 'E<gt>' may not both be specified on command line
3338 (F) An error peculiar to VMS. Perl does its own command line redirection, and
3339 thinks you tried to redirect stdout both to a file and into a pipe to another
3340 command. You need to choose one or the other, though nothing's stopping you
3341 from piping into a program or Perl script which 'splits' output into two
3344 open(OUT,">$ARGV[0]") or die "Can't write to $ARGV[0]: $!";
3351 =item Got an error from DosAllocMem
3353 (P) An error peculiar to OS/2. Most probably you're using an obsolete
3354 version of Perl, and this should not happen anyway.
3356 =item Malformed PERLLIB_PREFIX
3358 (F) An error peculiar to OS/2. PERLLIB_PREFIX should be of the form
3366 with nonempty prefix1 and prefix2. If C<prefix1> is indeed a prefix
3367 of a builtin library search path, prefix2 is substituted. The error
3368 may appear if components are not found, or are too long. See
3369 "PERLLIB_PREFIX" in F<README.os2>.
3371 =item PERL_SH_DIR too long
3373 (F) An error peculiar to OS/2. PERL_SH_DIR is the directory to find the
3374 C<sh>-shell in. See "PERL_SH_DIR" in F<README.os2>.
3376 =item Process terminated by SIG%s
3378 (W) This is a standard message issued by OS/2 applications, while *nix
3379 applications die in silence. It is considered a feature of the OS/2
3380 port. One can easily disable this by appropriate sighandlers, see
3381 L<perlipc/"Signals">. See also "Process terminated by SIGTERM/SIGINT"