3 perldiag - various Perl diagnostics
7 These messages are classified as follows (listed in increasing order of
10 (W) A warning (optional).
11 (D) A deprecation (optional).
12 (S) A severe warning (mandatory).
13 (F) A fatal error (trappable).
14 (P) An internal error you should never see (trappable).
15 (X) A very fatal error (nontrappable).
16 (A) An alien error message (not generated by Perl).
18 Optional warnings are enabled by using the B<-w> switch. Warnings may
19 be captured by setting C<$SIG{__WARN__}> to a reference to a routine that
20 will be called on each warning instead of printing it. See L<perlvar>.
21 Trappable errors may be trapped using the eval operator. See
24 Some of these messages are generic. Spots that vary are denoted with a %s,
25 just as in a printf format. Note that some messages start with a %s!
26 The symbols C<"%-?@> sort before the letters, while C<[> and C<\> sort after.
30 =item "my" variable %s can't be in a package
32 (F) Lexically scoped variables aren't in a package, so it doesn't make sense
33 to try to declare one with a package qualifier on the front. Use local()
34 if you want to localize a package variable.
36 =item "my" variable %s masks earlier declaration in same scope
38 (S) A lexical variable has been redeclared in the same scope, effectively
39 eliminating all access to the previous instance. This is almost always
40 a typographical error. Note that the earlier variable will still exist
41 until the end of the scope or until all closure referents to it are
44 =item "no" not allowed in expression
46 (F) The "no" keyword is recognized and executed at compile time, and returns
47 no useful value. See L<perlmod>.
49 =item "use" not allowed in expression
51 (F) The "use" keyword is recognized and executed at compile time, and returns
52 no useful value. See L<perlmod>.
54 =item % may only be used in unpack
56 (F) You can't pack a string by supplying a checksum, because the
57 checksumming process loses information, and you can't go the other
58 way. See L<perlfunc/unpack>.
60 =item %s (...) interpreted as function
62 (W) You've run afoul of the rule that says that any list operator followed
63 by parentheses turns into a function, with all the list operators arguments
64 found inside the parentheses. See L<perlop/Terms and List Operators (Leftward)>.
66 =item %s argument is not a HASH element
68 (F) The argument to exists() must be a hash element, such as
73 =item %s argument is not a HASH element or slice
75 (F) The argument to delete() must be either a hash element, such as
80 or a hash slice, such as
82 @foo{$bar, $baz, $xyzzy}
83 @{$ref->[12]}{"susie", "queue"}
85 =item %s did not return a true value
87 (F) A required (or used) file must return a true value to indicate that
88 it compiled correctly and ran its initialization code correctly. It's
89 traditional to end such a file with a "1;", though any true value would
90 do. See L<perlfunc/require>.
92 =item %s found where operator expected
94 (S) The Perl lexer knows whether to expect a term or an operator. If it
95 sees what it knows to be a term when it was expecting to see an operator,
96 it gives you this warning. Usually it indicates that an operator or
97 delimiter was omitted, such as a semicolon.
99 =item %s had compilation errors
101 (F) The final summary message when a C<perl -c> fails.
103 =item %s has too many errors
105 (F) The parser has given up trying to parse the program after 10 errors.
106 Further error messages would likely be uninformative.
108 =item %s matches null string many times
110 (W) The pattern you've specified would be an infinite loop if the
111 regular expression engine didn't specifically check for that. See L<perlre>.
113 =item %s never introduced
115 (S) The symbol in question was declared but somehow went out of scope
116 before it could possibly have been used.
120 (F) The final summary message when a C<perl -c> succeeds.
122 =item %s: Command not found
124 (A) You've accidentally run your script through B<csh> instead
125 of Perl. Check the #! line, or manually feed your script into
128 =item %s: Expression syntax
130 (A) You've accidentally run your script through B<csh> instead
131 of Perl. Check the #! line, or manually feed your script into
134 =item %s: Undefined variable
136 (A) You've accidentally run your script through B<csh> instead
137 of Perl. Check the #! line, or manually feed your script into
142 (A) You've accidentally run your script through the Bourne shell
143 instead of Perl. Check the #! line, or manually feed your script
146 =item B<-P> not allowed for setuid/setgid script
148 (F) The script would have to be opened by the C preprocessor by name,
149 which provides a race condition that breaks security.
151 =item C<-T> and C<-B> not implemented on filehandles
153 (F) Perl can't peek at the stdio buffer of filehandles when it doesn't
154 know about your kind of stdio. You'll have to use a filename instead.
156 =item 500 Server error
160 =item ?+* follows nothing in regexp
162 (F) You started a regular expression with a quantifier. Backslash it
163 if you meant it literally. See L<perlre>.
165 =item @ outside of string
167 (F) You had a pack template that specified an absolute position outside
168 the string being unpacked. See L<perlfunc/pack>.
170 =item accept() on closed fd
172 (W) You tried to do an accept on a closed socket. Did you forget to check
173 the return value of your socket() call? See L<perlfunc/accept>.
175 =item Allocation too large: %lx
177 (X) You can't allocate more than 64K on an MS-DOS machine.
179 =item Allocation too large
181 (F) You can't allocate more than 2^31+"small amount" bytes.
183 =item Applying %s to %s will act on scalar(%s)
185 (W) The pattern match (//), substitution (s///), and translation (tr///)
186 operators work on scalar values. If you apply one of them to an array
187 or a hash, it will convert the array or hash to a scalar value -- the
188 length of an array, or the population info of a hash -- and then work on
189 that scalar value. This is probably not what you meant to do. See
190 L<perlfunc/grep> and L<perlfunc/map> for alternatives.
192 =item Arg too short for msgsnd
194 (F) msgsnd() requires a string at least as long as sizeof(long).
196 =item Ambiguous use of %s resolved as %s
198 (W)(S) You said something that may not be interpreted the way
199 you thought. Normally it's pretty easy to disambiguate it by supplying
200 a missing quote, operator, parenthesis pair or declaration.
202 =item Args must match #! line
204 (F) The setuid emulator requires that the arguments Perl was invoked
205 with match the arguments specified on the #! line. Since some systems
206 impose a one-argument limit on the #! line, try combining switches;
207 for example, turn C<-w -U> into C<-wU>.
209 =item Argument "%s" isn't numeric%s
211 (W) The indicated string was fed as an argument to an operator that
212 expected a numeric value instead. If you're fortunate the message
213 will identify which operator was so unfortunate.
215 =item Array @%s missing the @ in argument %d of %s()
217 (D) Really old Perl let you omit the @ on array names in some spots. This
218 is now heavily deprecated.
220 =item assertion botched: %s
222 (P) The malloc package that comes with Perl had an internal failure.
224 =item Assertion failed: file "%s"
226 (P) A general assertion failed. The file in question must be examined.
228 =item Assignment to both a list and a scalar
230 (F) If you assign to a conditional operator, the 2nd and 3rd arguments
231 must either both be scalars or both be lists. Otherwise Perl won't
232 know which context to supply to the right side.
234 =item Attempt to free non-arena SV: 0x%lx
236 (P) All SV objects are supposed to be allocated from arenas that will
237 be garbage collected on exit. An SV was discovered to be outside any
240 =item Attempt to free nonexistent shared string
242 (P) Perl maintains a reference counted internal table of strings to
243 optimize the storage and access of hash keys and other strings. This
244 indicates someone tried to decrement the reference count of a string
245 that can no longer be found in the table.
247 =item Attempt to free temp prematurely
249 (W) Mortalized values are supposed to be freed by the free_tmps()
250 routine. This indicates that something else is freeing the SV before
251 the free_tmps() routine gets a chance, which means that the free_tmps()
252 routine will be freeing an unreferenced scalar when it does try to free
255 =item Attempt to free unreferenced glob pointers
257 (P) The reference counts got screwed up on symbol aliases.
259 =item Attempt to free unreferenced scalar
261 (W) Perl went to decrement the reference count of a scalar to see if it
262 would go to 0, and discovered that it had already gone to 0 earlier,
263 and should have been freed, and in fact, probably was freed. This
264 could indicate that SvREFCNT_dec() was called too many times, or that
265 SvREFCNT_inc() was called too few times, or that the SV was mortalized
266 when it shouldn't have been, or that memory has been corrupted.
268 =item Attempt to use reference as lvalue in substr
270 (W) You supplied a reference as the first argument to substr() used
271 as an lvalue, which is pretty strange. Perhaps you forgot to
272 dereference it first. See L<perlfunc/substr>.
274 =item Bad arg length for %s, is %d, should be %d
276 (F) You passed a buffer of the wrong size to one of msgctl(), semctl() or
277 shmctl(). In C parlance, the correct sizes are, respectively,
278 S<sizeof(struct msqid_ds *)>, S<sizeof(struct semid_ds *)>, and
279 S<sizeof(struct shmid_ds *)>.
281 =item Bad filehandle: %s
283 (F) A symbol was passed to something wanting a filehandle, but the symbol
284 has no filehandle associated with it. Perhaps you didn't do an open(), or
285 did it in another package.
287 =item Bad free() ignored
289 (S) An internal routine called free() on something that had never been
290 malloc()ed in the first place. Mandatory, but can be disabled by
291 setting environment variable C<PERL_BADFREE> to 1.
293 This message can be quite often seen with DB_File on systems with
294 "hard" dynamic linking, like C<AIX> and C<OS/2>. It is a bug of
295 C<Berkeley DB> which is left unnoticed if C<DB> uses I<forgiving>
300 (P) One of the internal hash routines was passed a null HV pointer.
302 =item Bad name after %s::
304 (F) You started to name a symbol by using a package prefix, and then didn't
305 finish the symbol. In particular, you can't interpolate outside of quotes,
314 $sym = "mypack::$var";
316 =item Bad symbol for array
318 (P) An internal request asked to add an array entry to something that
319 wasn't a symbol table entry.
321 =item Bad symbol for filehandle
323 (P) An internal request asked to add a filehandle entry to something that
324 wasn't a symbol table entry.
326 =item Bad symbol for hash
328 (P) An internal request asked to add a hash entry to something that
329 wasn't a symbol table entry.
331 =item Badly placed ()'s
333 (A) You've accidentally run your script through B<csh> instead
334 of Perl. Check the #! line, or manually feed your script into
337 =item Bareword "%s" not allowed while "strict subs" in use
339 (F) With "strict subs" in use, a bareword is only allowed as a
340 subroutine identifier, in curly braces or to the left of the "=>" symbol.
341 Perhaps you need to predeclare a subroutine?
343 =item BEGIN failed--compilation aborted
345 (F) An untrapped exception was raised while executing a BEGIN subroutine.
346 Compilation stops immediately and the interpreter is exited.
348 =item BEGIN not safe after errors--compilation aborted
350 (F) Perl found a C<BEGIN {}> subroutine (or a C<use> directive, which
351 implies a C<BEGIN {}>) after one or more compilation errors had
352 already occurred. Since the intended environment for the C<BEGIN {}>
353 could not be guaranteed (due to the errors), and since subsequent code
354 likely depends on its correct operation, Perl just gave up.
356 =item bind() on closed fd
358 (W) You tried to do a bind on a closed socket. Did you forget to check
359 the return value of your socket() call? See L<perlfunc/bind>.
361 =item Bizarre copy of %s in %s
363 (P) Perl detected an attempt to copy an internal value that is not copiable.
365 =item Callback called exit
367 (F) A subroutine invoked from an external package via perl_call_sv()
368 exited by calling exit.
370 =item Can't "goto" outside a block
372 (F) A "goto" statement was executed to jump out of what might look
373 like a block, except that it isn't a proper block. This usually
374 occurs if you tried to jump out of a sort() block or subroutine, which
375 is a no-no. See L<perlfunc/goto>.
377 =item Can't "last" outside a block
379 (F) A "last" statement was executed to break out of the current block,
380 except that there's this itty bitty problem called there isn't a
381 current block. Note that an "if" or "else" block doesn't count as a
382 "loopish" block, as doesn't a block given to sort(). You can usually double
383 the curlies to get the same effect though, because the inner curlies
384 will be considered a block that loops once. See L<perlfunc/last>.
386 =item Can't "next" outside a block
388 (F) A "next" statement was executed to reiterate the current block, but
389 there isn't a current block. Note that an "if" or "else" block doesn't
390 count as a "loopish" block, as doesn't a block given to sort(). You can
391 usually double the curlies to get the same effect though, because the inner
392 curlies will be considered a block that loops once. See L<perlfunc/next>.
394 =item Can't "redo" outside a block
396 (F) A "redo" statement was executed to restart the current block, but
397 there isn't a current block. Note that an "if" or "else" block doesn't
398 count as a "loopish" block, as doesn't a block given to sort(). You can
399 usually double the curlies to get the same effect though, because the inner
400 curlies will be considered a block that loops once. See L<perlfunc/redo>.
402 =item Can't bless non-reference value
404 (F) Only hard references may be blessed. This is how Perl "enforces"
405 encapsulation of objects. See L<perlobj>.
407 =item Can't break at that line
409 (S) A warning intended to only be printed while running within the debugger, indicating
410 the line number specified wasn't the location of a statement that could
413 =item Can't call method "%s" in empty package "%s"
415 (F) You called a method correctly, and it correctly indicated a package
416 functioning as a class, but that package doesn't have ANYTHING defined
417 in it, let alone methods. See L<perlobj>.
419 =item Can't call method "%s" on unblessed reference
421 (F) A method call must know in what package it's supposed to run. It
422 ordinarily finds this out from the object reference you supply, but
423 you didn't supply an object reference in this case. A reference isn't
424 an object reference until it has been blessed. See L<perlobj>.
426 =item Can't call method "%s" without a package or object reference
428 (F) You used the syntax of a method call, but the slot filled by the
429 object reference or package name contains an expression that returns
430 neither an object reference nor a package name. (Perhaps it's null?)
431 Something like this will reproduce the error:
434 process $BADREF 1,2,3;
435 $BADREF->process(1,2,3);
437 =item Can't chdir to %s
439 (F) You called C<perl -x/foo/bar>, but C</foo/bar> is not a directory
440 that you can chdir to, possibly because it doesn't exist.
442 =item Can't coerce %s to integer in %s
444 (F) Certain types of SVs, in particular real symbol table entries
445 (typeglobs), can't be forced to stop being what they are. So you can't
455 but then $foo no longer contains a glob.
457 =item Can't coerce %s to number in %s
459 (F) Certain types of SVs, in particular real symbol table entries
460 (typeglobs), can't be forced to stop being what they are.
462 =item Can't coerce %s to string in %s
464 (F) Certain types of SVs, in particular real symbol table entries
465 (typeglobs), can't be forced to stop being what they are.
467 =item Can't create pipe mailbox
469 (P) An error peculiar to VMS. The process is suffering from exhausted quotas
470 or other plumbing problems.
472 =item Can't declare %s in my
474 (F) Only scalar, array, and hash variables may be declared as lexical variables.
475 They must have ordinary identifiers as names.
477 =item Can't do inplace edit on %s: %s
479 (S) The creation of the new file failed for the indicated reason.
481 =item Can't do inplace edit without backup
483 (F) You're on a system such as MS-DOS that gets confused if you try reading
484 from a deleted (but still opened) file. You have to say C<-i.bak>, or some
487 =item Can't do inplace edit: %s E<gt> 14 characters
489 (S) There isn't enough room in the filename to make a backup name for the file.
491 =item Can't do inplace edit: %s is not a regular file
493 (S) You tried to use the B<-i> switch on a special file, such as a file in
494 /dev, or a FIFO. The file was ignored.
496 =item Can't do setegid!
498 (P) The setegid() call failed for some reason in the setuid emulator
501 =item Can't do seteuid!
503 (P) The setuid emulator of suidperl failed for some reason.
505 =item Can't do setuid
507 (F) This typically means that ordinary perl tried to exec suidperl to
508 do setuid emulation, but couldn't exec it. It looks for a name of the
509 form sperl5.000 in the same directory that the perl executable resides
510 under the name perl5.000, typically /usr/local/bin on Unix machines.
511 If the file is there, check the execute permissions. If it isn't, ask
512 your sysadmin why he and/or she removed it.
514 =item Can't do waitpid with flags
516 (F) This machine doesn't have either waitpid() or wait4(), so only waitpid()
517 without flags is emulated.
519 =item Can't do {n,m} with n E<gt> m
521 (F) Minima must be less than or equal to maxima. If you really want
522 your regexp to match something 0 times, just put {0}. See L<perlre>.
524 =item Can't emulate -%s on #! line
526 (F) The #! line specifies a switch that doesn't make sense at this point.
527 For example, it'd be kind of silly to put a B<-x> on the #! line.
529 =item Can't exec "%s": %s
531 (W) An system(), exec(), or piped open call could not execute the named
532 program for the indicated reason. Typical reasons include: the permissions
533 were wrong on the file, the file wasn't found in C<$ENV{PATH}>, the
534 executable in question was compiled for another architecture, or the
535 #! line in a script points to an interpreter that can't be run for
536 similar reasons. (Or maybe your system doesn't support #! at all.)
540 (F) Perl was trying to execute the indicated program for you because that's
541 what the #! line said. If that's not what you wanted, you may need to
542 mention "perl" on the #! line somewhere.
544 =item Can't execute %s
546 (F) You used the B<-S> switch, but the script to execute could not be found
547 in the PATH, or at least not with the correct permissions.
549 =item Can't find label %s
551 (F) You said to goto a label that isn't mentioned anywhere that it's possible
552 for us to go to. See L<perlfunc/goto>.
554 =item Can't find string terminator %s anywhere before EOF
556 (F) Perl strings can stretch over multiple lines. This message means that
557 the closing delimiter was omitted. Because bracketed quotes count nesting
558 levels, the following is missing its final parenthesis:
560 print q(The character '(' starts a side comment.)
564 (F) A fatal error occurred while trying to fork while opening a pipeline.
566 =item Can't get filespec - stale stat buffer?
568 (S) A warning peculiar to VMS. This arises because of the difference between
569 access checks under VMS and under the Unix model Perl assumes. Under VMS,
570 access checks are done by filename, rather than by bits in the stat buffer, so
571 that ACLs and other protections can be taken into account. Unfortunately, Perl
572 assumes that the stat buffer contains all the necessary information, and passes
573 it, instead of the filespec, to the access checking routine. It will try to
574 retrieve the filespec using the device name and FID present in the stat buffer,
575 but this works only if you haven't made a subsequent call to the CRTL stat()
576 routine, because the device name is overwritten with each call. If this warning
577 appears, the name lookup failed, and the access checking routine gave up and
578 returned FALSE, just to be conservative. (Note: The access checking routine
579 knows about the Perl C<stat> operator and file tests, so you shouldn't ever
580 see this warning in response to a Perl command; it arises only if some internal
581 code takes stat buffers lightly.)
583 =item Can't get pipe mailbox device name
585 (P) An error peculiar to VMS. After creating a mailbox to act as a pipe, Perl
586 can't retrieve its name for later use.
588 =item Can't get SYSGEN parameter value for MAXBUF
590 (P) An error peculiar to VMS. Perl asked $GETSYI how big you want your
591 mailbox buffers to be, and didn't get an answer.
593 =item Can't goto subroutine outside a subroutine
595 (F) The deeply magical "goto subroutine" call can only replace one subroutine
596 call for another. It can't manufacture one out of whole cloth. In general
597 you should be calling it out of only an AUTOLOAD routine anyway. See
600 =item Can't localize a reference
602 (F) You said something like C<local $$ref>, which is not allowed because
603 the compiler can't determine whether $ref will end up pointing to anything
604 with a symbol table entry, and a symbol table entry is necessary to
607 =item Can't localize lexical variable %s
609 (F) You used local on a variable name that was previously declared as a
610 lexical variable using "my". This is not allowed. If you want to
611 localize a package variable of the same name, qualify it with the
614 =item Can't locate %s in @INC
616 (F) You said to do (or require, or use) a file that couldn't be found in
617 in any of the libraries mentioned in @INC. Perhaps you need to set the
618 PERL5LIB or PERL5OPT environment variable to say where the extra library
619 is, or maybe the script needs to add the library name to @INC. Or maybe
620 you just misspelled the name of the file. See L<perlfunc/require>.
622 =item Can't locate object method "%s" via package "%s"
624 (F) You called a method correctly, and it correctly indicated a package
625 functioning as a class, but that package doesn't define that particular
626 method, nor does any of its base classes. See L<perlobj>.
628 =item Can't locate package %s for @%s::ISA
630 (W) The @ISA array contained the name of another package that doesn't seem
635 (F) The mktemp() routine failed for some reason while trying to process
636 a B<-e> switch. Maybe your /tmp partition is full, or clobbered.
638 =item Can't modify %s in %s
640 (F) You aren't allowed to assign to the item indicated, or otherwise try to
641 change it, such as with an auto-increment.
643 =item Can't modify nonexistent substring
645 (P) The internal routine that does assignment to a substr() was handed
648 =item Can't msgrcv to read-only var
650 (F) The target of a msgrcv must be modifiable to be used as a receive
653 =item Can't open %s: %s
655 (S) An inplace edit couldn't open the original file for the indicated reason.
656 Usually this is because you don't have read permission for the file.
658 =item Can't open bidirectional pipe
660 (W) You tried to say C<open(CMD, "|cmd|")>, which is not supported. You can
661 try any of several modules in the Perl library to do this, such as
662 IPC::Open2. Alternately, direct the pipe's output to a file using "E<gt>",
663 and then read it in under a different file handle.
665 =item Can't open error file %s as stderr
667 (F) An error peculiar to VMS. Perl does its own command line redirection, and
668 couldn't open the file specified after '2E<gt>' or '2E<gt>E<gt>' on the
669 command line for writing.
671 =item Can't open input file %s as stdin
673 (F) An error peculiar to VMS. Perl does its own command line redirection, and
674 couldn't open the file specified after 'E<lt>' on the command line for reading.
676 =item Can't open output file %s as stdout
678 (F) An error peculiar to VMS. Perl does its own command line redirection, and
679 couldn't open the file specified after 'E<gt>' or 'E<gt>E<gt>' on the command
682 =item Can't open output pipe (name: %s)
684 (P) An error peculiar to VMS. Perl does its own command line redirection, and
685 couldn't open the pipe into which to send data destined for stdout.
687 =item Can't open perl script "%s": %s
689 (F) The script you specified can't be opened for the indicated reason.
691 =item Can't rename %s to %s: %s, skipping file
693 (S) The rename done by the B<-i> switch failed for some reason, probably because
694 you don't have write permission to the directory.
696 =item Can't reopen input pipe (name: %s) in binary mode
698 (P) An error peculiar to VMS. Perl thought stdin was a pipe, and tried to
699 reopen it to accept binary data. Alas, it failed.
701 =item Can't reswap uid and euid
703 (P) The setreuid() call failed for some reason in the setuid emulator
706 =item Can't return outside a subroutine
708 (F) The return statement was executed in mainline code, that is, where
709 there was no subroutine call to return out of. See L<perlsub>.
711 =item Can't stat script "%s"
713 (P) For some reason you can't fstat() the script even though you have
714 it open already. Bizarre.
716 =item Can't swap uid and euid
718 (P) The setreuid() call failed for some reason in the setuid emulator
721 =item Can't take log of %g
723 (F) Logarithms are defined on only positive real numbers.
725 =item Can't take sqrt of %g
727 (F) For ordinary real numbers, you can't take the square root of a
728 negative number. There's a Complex package available for Perl, though,
729 if you really want to do that.
731 =item Can't undef active subroutine
733 (F) You can't undefine a routine that's currently running. You can,
734 however, redefine it while it's running, and you can even undef the
735 redefined subroutine while the old routine is running. Go figure.
739 (F) You tried to unshift an "unreal" array that can't be unshifted, such
740 as the main Perl stack.
742 =item Can't upgrade that kind of scalar
744 (P) The internal sv_upgrade routine adds "members" to an SV, making
745 it into a more specialized kind of SV. The top several SV types are
746 so specialized, however, that they cannot be interconverted. This
747 message indicates that such a conversion was attempted.
749 =item Can't upgrade to undef
751 (P) The undefined SV is the bottom of the totem pole, in the scheme
752 of upgradability. Upgrading to undef indicates an error in the
753 code calling sv_upgrade.
755 =item Can't use "my %s" in sort comparison
757 (F) The global variables $a and $b are reserved for sort comparisons.
758 You mentioned $a or $b in the same line as the E<lt>=E<gt> or cmp operator,
759 and the variable had earlier been declared as a lexical variable.
760 Either qualify the sort variable with the package name, or rename the
763 =item Can't use %s for loop variable
765 (F) Only a simple scalar variable may be used as a loop variable on a foreach.
767 =item Can't use %s ref as %s ref
769 (F) You've mixed up your reference types. You have to dereference a
770 reference of the type needed. You can use the ref() function to
771 test the type of the reference, if need be.
773 =item Can't use \1 to mean $1 in expression
775 (W) In an ordinary expression, backslash is a unary operator that creates
776 a reference to its argument. The use of backslash to indicate a backreference
777 to a matched substring is valid only as part of a regular expression pattern.
778 Trying to do this in ordinary Perl code produces a value that prints
779 out looking like SCALAR(0xdecaf). Use the $1 form instead.
781 =item Can't use bareword ("%s") as %s ref while \"strict refs\" in use
783 (F) Only hard references are allowed by "strict refs". Symbolic references
784 are disallowed. See L<perlref>.
786 =item Can't use string ("%s") as %s ref while "strict refs" in use
788 (F) Only hard references are allowed by "strict refs". Symbolic references
789 are disallowed. See L<perlref>.
791 =item Can't use an undefined value as %s reference
793 (F) A value used as either a hard reference or a symbolic reference must
794 be a defined value. This helps to delurk some insidious errors.
796 =item Can't use global %s in "my"
798 (F) You tried to declare a magical variable as a lexical variable. This is
799 not allowed, because the magic can be tied to only one location (namely
800 the global variable) and it would be incredibly confusing to have
801 variables in your program that looked like magical variables but
804 =item Can't use subscript on %s
806 (F) The compiler tried to interpret a bracketed expression as a
807 subscript. But to the left of the brackets was an expression that
808 didn't look like an array reference, or anything else subscriptable.
810 =item Can't write to temp file for B<-e>: %s
812 (F) The write routine failed for some reason while trying to process
813 a B<-e> switch. Maybe your /tmp partition is full, or clobbered.
815 =item Can't x= to read-only value
817 (F) You tried to repeat a constant value (often the undefined value) with
818 an assignment operator, which implies modifying the value itself.
819 Perhaps you need to copy the value to a temporary, and repeat that.
821 =item Cannot open temporary file
823 (F) The create routine failed for some reason while trying to process
824 a B<-e> switch. Maybe your /tmp partition is full, or clobbered.
826 =item Cannot resolve method `%s' overloading `%s' in package `%s'
828 (F|P) Error resolving overloading specified by a method name (as
829 opposed to a subroutine reference): no such method callable via the
830 package. If method name is C<???>, this is an internal error.
832 =item chmod: mode argument is missing initial 0
834 (W) A novice will sometimes say
838 not realizing that 777 will be interpreted as a decimal number, equivalent
839 to 01411. Octal constants are introduced with a leading 0 in Perl, as in C.
841 =item Close on unopened file E<lt>%sE<gt>
843 (W) You tried to close a filehandle that was never opened.
845 =item connect() on closed fd
847 (W) You tried to do a connect on a closed socket. Did you forget to check
848 the return value of your socket() call? See L<perlfunc/connect>.
850 =item Constant subroutine %s redefined
852 (S) You redefined a subroutine which had previously been eligible for
853 inlining. See L<perlsub/"Constant Functions"> for commentary and
856 =item Constant subroutine %s undefined
858 (S) You undefined a subroutine which had previously been eligible for
859 inlining. See L<perlsub/"Constant Functions"> for commentary and
862 =item Copy method did not return a reference
864 (F) The method which overloads "=" is buggy. See L<overload/Copy Constructor>.
866 =item Corrupt malloc ptr 0x%lx at 0x%lx
868 (P) The malloc package that comes with Perl had an internal failure.
870 =item corrupted regexp pointers
872 (P) The regular expression engine got confused by what the regular
873 expression compiler gave it.
875 =item corrupted regexp program
877 (P) The regular expression engine got passed a regexp program without
878 a valid magic number.
880 =item Deep recursion on subroutine "%s"
882 (W) This subroutine has called itself (directly or indirectly) 100
883 times than it has returned. This probably indicates an infinite
884 recursion, unless you're writing strange benchmark programs, in which
885 case it indicates something else.
887 =item Did you mean &%s instead?
889 (W) You probably referred to an imported subroutine &FOO as $FOO or some such.
891 =item Did you mean $ or @ instead of %?
893 (W) You probably said %hash{$key} when you meant $hash{$key} or @hash{@keys}.
894 On the other hand, maybe you just meant %hash and got carried away.
898 (F) You passed die() an empty string (the equivalent of C<die "">) or
899 you called it with no args and both C<$@> and C<$_> were empty.
901 =item Do you need to predeclare %s?
903 (S) This is an educated guess made in conjunction with the message "%s
904 found where operator expected". It often means a subroutine or module
905 name is being referenced that hasn't been declared yet. This may be
906 because of ordering problems in your file, or because of a missing
907 "sub", "package", "require", or "use" statement. If you're
908 referencing something that isn't defined yet, you don't actually have
909 to define the subroutine or package before the current location. You
910 can use an empty "sub foo;" or "package FOO;" to enter a "forward"
913 =item Don't know how to handle magic of type '%s'
915 (P) The internal handling of magical variables has been cursed.
917 =item do_study: out of memory
919 (P) This should have been caught by safemalloc() instead.
921 =item Duplicate free() ignored
923 (S) An internal routine called free() on something that had already
926 =item elseif should be elsif
928 (S) There is no keyword "elseif" in Perl because Larry thinks it's
929 ugly. Your code will be interpreted as an attempt to call a method
930 named "elseif" for the class returned by the following block. This is
931 unlikely to be what you want.
933 =item END failed--cleanup aborted
935 (F) An untrapped exception was raised while executing an END subroutine.
936 The interpreter is immediately exited.
938 =item Error converting file specification %s
940 (F) An error peculiar to VMS. Because Perl may have to deal with file
941 specifications in either VMS or Unix syntax, it converts them to a
942 single form when it must operate on them directly. Either you've
943 passed an invalid file specification to Perl, or you've found a
944 case the conversion routines don't handle. Drat.
946 =item Execution of %s aborted due to compilation errors
948 (F) The final summary message when a Perl compilation fails.
950 =item Exiting eval via %s
952 (W) You are exiting an eval by unconventional means, such as
953 a goto, or a loop control statement.
955 =item Exiting pseudo-block via %s
957 (W) You are exiting a rather special block construct (like a sort block or
958 subroutine) by unconventional means, such as a goto, or a loop control
959 statement. See L<perlfunc/sort>.
961 =item Exiting subroutine via %s
963 (W) You are exiting a subroutine by unconventional means, such as
964 a goto, or a loop control statement.
966 =item Exiting substitution via %s
968 (W) You are exiting a substitution by unconventional means, such as
969 a return, a goto, or a loop control statement.
971 =item Fatal VMS error at %s, line %d
973 (P) An error peculiar to VMS. Something untoward happened in a VMS system
974 service or RTL routine; Perl's exit status should provide more details. The
975 filename in "at %s" and the line number in "line %d" tell you which section of
976 the Perl source code is distressed.
978 =item fcntl is not implemented
980 (F) Your machine apparently doesn't implement fcntl(). What is this, a
983 =item Filehandle %s never opened
985 (W) An I/O operation was attempted on a filehandle that was never initialized.
986 You need to do an open() or a socket() call, or call a constructor from
987 the FileHandle package.
989 =item Filehandle %s opened for only input
991 (W) You tried to write on a read-only filehandle. If you
992 intended it to be a read-write filehandle, you needed to open it with
993 "+E<lt>" or "+E<gt>" or "+E<gt>E<gt>" instead of with "E<lt>" or nothing. If
994 you intended only to write the file, use "E<gt>" or "E<gt>E<gt>". See
997 =item Filehandle opened for only input
999 (W) You tried to write on a read-only filehandle. If you
1000 intended it to be a read-write filehandle, you needed to open it with
1001 "+E<lt>" or "+E<gt>" or "+E<gt>E<gt>" instead of with "E<lt>" or nothing. If
1002 you intended only to write the file, use "E<gt>" or "E<gt>E<gt>". See
1005 =item Final $ should be \$ or $name
1007 (F) You must now decide whether the final $ in a string was meant to be
1008 a literal dollar sign, or was meant to introduce a variable name
1009 that happens to be missing. So you have to put either the backslash or
1012 =item Final @ should be \@ or @name
1014 (F) You must now decide whether the final @ in a string was meant to be
1015 a literal "at" sign, or was meant to introduce a variable name
1016 that happens to be missing. So you have to put either the backslash or
1019 =item Format %s redefined
1021 (W) You redefined a format. To suppress this warning, say
1025 eval "format NAME =...";
1028 =item Format not terminated
1030 (F) A format must be terminated by a line with a solitary dot. Perl got
1031 to the end of your file without finding such a line.
1033 =item Found = in conditional, should be ==
1043 (or something like that).
1045 =item gdbm store returned %d, errno %d, key "%s"
1047 (S) A warning from the GDBM_File extension that a store failed.
1049 =item gethostent not implemented
1051 (F) Your C library apparently doesn't implement gethostent(), probably
1052 because if it did, it'd feel morally obligated to return every hostname
1055 =item get{sock,peer}name() on closed fd
1057 (W) You tried to get a socket or peer socket name on a closed socket.
1058 Did you forget to check the return value of your socket() call?
1060 =item getpwnam returned invalid UIC %#o for user "%s"
1062 (S) A warning peculiar to VMS. The call to C<sys$getuai> underlying the
1063 C<getpwnam> operator returned an invalid UIC.
1066 =item Glob not terminated
1068 (F) The lexer saw a left angle bracket in a place where it was expecting
1069 a term, so it's looking for the corresponding right angle bracket, and not
1070 finding it. Chances are you left some needed parentheses out earlier in
1071 the line, and you really meant a "less than".
1073 =item Global symbol "%s" requires explicit package name
1075 (F) You've said "use strict vars", which indicates that all variables
1076 must either be lexically scoped (using "my"), or explicitly qualified to
1077 say which package the global variable is in (using "::").
1079 =item goto must have label
1081 (F) Unlike with "next" or "last", you're not allowed to goto an
1082 unspecified destination. See L<perlfunc/goto>.
1084 =item Had to create %s unexpectedly
1086 (S) A routine asked for a symbol from a symbol table that ought to have
1087 existed already, but for some reason it didn't, and had to be created on
1088 an emergency basis to prevent a core dump.
1090 =item Hash %%s missing the % in argument %d of %s()
1092 (D) Really old Perl let you omit the % on hash names in some spots. This
1093 is now heavily deprecated.
1095 =item Ill-formed logical name |%s| in prime_env_iter
1097 (W) A warning peculiar to VMS. A logical name was encountered when preparing
1098 to iterate over %ENV which violates the syntactic rules governing logical
1099 names. Because it cannot be translated normally, it is skipped, and will not
1100 appear in %ENV. This may be a benign occurrence, as some software packages
1101 might directly modify logical name tables and introduce nonstandard names,
1102 or it may indicate that a logical name table has been corrupted.
1104 =item Illegal character %s (carriage return)
1106 (F) A carriage return character was found in the input. This is an
1107 error, and not a warning, because carriage return characters can break
1108 multi-line strings, including here documents (e.g., C<print E<lt>E<lt>EOF;>).
1110 Under Unix, this error is usually caused by executing Perl code --
1111 either the main program, a module, or an eval'd string -- that was
1112 transferred over a network connection from a non-Unix system without
1113 properly converting the text file format.
1115 Under systems that use something other than '\n' to delimit lines of
1116 text, this error can also be caused by reading Perl code from a file
1117 handle that is in binary mode (as set by the C<binmode> operator).
1119 In either case, the Perl code in question will probably need to be
1120 converted with something like C<s/\x0D\x0A?/\n/g> before it can be
1123 =item Illegal division by zero
1125 (F) You tried to divide a number by 0. Either something was wrong in your
1126 logic, or you need to put a conditional in to guard against meaningless input.
1128 =item Illegal modulus zero
1130 (F) You tried to divide a number by 0 to get the remainder. Most numbers
1131 don't take to this kindly.
1133 =item Illegal octal digit
1135 (F) You used an 8 or 9 in a octal number.
1137 =item Illegal octal digit ignored
1139 (W) You may have tried to use an 8 or 9 in a octal number. Interpretation
1140 of the octal number stopped before the 8 or 9.
1142 =item Illegal switch in PERL5OPT: %s
1144 (X) The PERL5OPT environment variable may only be used to set the
1145 following switches: B<-[DIMUdmw]>.
1147 =item In string, @%s now must be written as \@%s
1149 (F) It used to be that Perl would try to guess whether you wanted an
1150 array interpolated or a literal @. It did this when the string was first
1151 used at runtime. Now strings are parsed at compile time, and ambiguous
1152 instances of @ must be disambiguated, either by prepending a backslash to
1153 indicate a literal, or by declaring (or using) the array within the
1154 program before the string (lexically). (Someday it will simply assume
1155 that an unbackslashed @ interpolates an array.)
1157 =item Insecure dependency in %s
1159 (F) You tried to do something that the tainting mechanism didn't like.
1160 The tainting mechanism is turned on when you're running setuid or setgid,
1161 or when you specify B<-T> to turn it on explicitly. The tainting mechanism
1162 labels all data that's derived directly or indirectly from the user,
1163 who is considered to be unworthy of your trust. If any such data is
1164 used in a "dangerous" operation, you get this error. See L<perlsec>
1165 for more information.
1167 =item Insecure directory in %s
1169 (F) You can't use system(), exec(), or a piped open in a setuid or setgid
1170 script if C<$ENV{PATH}> contains a directory that is writable by the world.
1175 (F) You can't use system(), exec(), or a piped open in a setuid or
1176 setgid script if C<$ENV{PATH}> is derived from data supplied (or
1177 potentially supplied) by the user. The script must set the path to a
1178 known value, using trustworthy data. See L<perlsec>.
1180 =item Integer overflow in hex number
1182 (S) The literal hex number you have specified is too big for your
1183 architecture. On a 32-bit architecture the largest hex literal is
1186 =item Integer overflow in octal number
1188 (S) The literal octal number you have specified is too big for your
1189 architecture. On a 32-bit architecture the largest octal literal is
1192 =item Internal inconsistency in tracking vforks
1194 (S) A warning peculiar to VMS. Perl keeps track of the number
1195 of times you've called C<fork> and C<exec>, to determine
1196 whether the current call to C<exec> should affect the current
1197 script or a subprocess (see L<perlvms/exec>). Somehow, this count
1198 has become scrambled, so Perl is making a guess and treating
1199 this C<exec> as a request to terminate the Perl script
1200 and execute the specified command.
1202 =item internal disaster in regexp
1204 (P) Something went badly wrong in the regular expression parser.
1206 =item internal urp in regexp at /%s/
1208 (P) Something went badly awry in the regular expression parser.
1210 =item invalid [] range in regexp
1212 (F) The range specified in a character class had a minimum character
1213 greater than the maximum character. See L<perlre>.
1215 =item ioctl is not implemented
1217 (F) Your machine apparently doesn't implement ioctl(), which is pretty
1218 strange for a machine that supports C.
1220 =item junk on end of regexp
1222 (P) The regular expression parser is confused.
1224 =item Label not found for "last %s"
1226 (F) You named a loop to break out of, but you're not currently in a
1227 loop of that name, not even if you count where you were called from.
1228 See L<perlfunc/last>.
1230 =item Label not found for "next %s"
1232 (F) You named a loop to continue, but you're not currently in a loop of
1233 that name, not even if you count where you were called from. See
1236 =item Label not found for "redo %s"
1238 (F) You named a loop to restart, but you're not currently in a loop of
1239 that name, not even if you count where you were called from. See
1242 =item listen() on closed fd
1244 (W) You tried to do a listen on a closed socket. Did you forget to check
1245 the return value of your socket() call? See L<perlfunc/listen>.
1247 =item Method for operation %s not found in package %s during blessing
1249 (F) An attempt was made to specify an entry in an overloading table that
1250 doesn't resolve to a valid subroutine. See L<overload>.
1252 =item Might be a runaway multi-line %s string starting on line %d
1254 (S) An advisory indicating that the previous error may have been caused
1255 by a missing delimiter on a string or pattern, because it eventually
1256 ended earlier on the current line.
1258 =item Misplaced _ in number
1260 (W) An underline in a decimal constant wasn't on a 3-digit boundary.
1262 =item Missing $ on loop variable
1264 (F) Apparently you've been programming in B<csh> too much. Variables are always
1265 mentioned with the $ in Perl, unlike in the shells, where it can vary from
1266 one line to the next.
1268 =item Missing comma after first argument to %s function
1270 (F) While certain functions allow you to specify a filehandle or an
1271 "indirect object" before the argument list, this ain't one of them.
1273 =item Missing operator before %s?
1275 (S) This is an educated guess made in conjunction with the message "%s
1276 found where operator expected". Often the missing operator is a comma.
1278 =item Missing right bracket
1280 (F) The lexer counted more opening curly brackets (braces) than closing ones.
1281 As a general rule, you'll find it's missing near the place you were last
1284 =item Missing semicolon on previous line?
1286 (S) This is an educated guess made in conjunction with the message "%s
1287 found where operator expected". Don't automatically put a semicolon on
1288 the previous line just because you saw this message.
1290 =item Modification of a read-only value attempted
1292 (F) You tried, directly or indirectly, to change the value of a
1293 constant. You didn't, of course, try "2 = 1", because the compiler
1294 catches that. But an easy way to do the same thing is:
1296 sub mod { $_[0] = 1 }
1299 Another way is to assign to a substr() that's off the end of the string.
1301 =item Modification of noncreatable array value attempted, subscript %d
1303 (F) You tried to make an array value spring into existence, and the
1304 subscript was probably negative, even counting from end of the array
1307 =item Modification of noncreatable hash value attempted, subscript "%s"
1309 (F) You tried to make a hash value spring into existence, and it couldn't
1310 be created for some peculiar reason.
1312 =item Module name must be constant
1314 (F) Only a bare module name is allowed as the first argument to a "use".
1316 =item msg%s not implemented
1318 (F) You don't have System V message IPC on your system.
1320 =item Multidimensional syntax %s not supported
1322 (W) Multidimensional arrays aren't written like C<$foo[1,2,3]>. They're written
1323 like C<$foo[1][2][3]>, as in C.
1325 =item Name "%s::%s" used only once: possible typo
1327 (W) Typographical errors often show up as unique variable names.
1328 If you had a good reason for having a unique name, then just mention
1329 it again somehow to suppress the message. The C<use vars> pragma is
1330 provided for just this purpose.
1332 =item Negative length
1334 (F) You tried to do a read/write/send/recv operation with a buffer length
1335 that is less than 0. This is difficult to imagine.
1337 =item nested *?+ in regexp
1339 (F) You can't quantify a quantifier without intervening parentheses. So
1340 things like ** or +* or ?* are illegal.
1342 Note, however, that the minimal matching quantifiers, C<*?>, C<+?>, and C<??> appear
1343 to be nested quantifiers, but aren't. See L<perlre>.
1347 (F) The setuid emulator requires that scripts have a well-formed #! line
1348 even on machines that don't support the #! construct.
1350 =item No %s allowed while running setuid
1352 (F) Certain operations are deemed to be too insecure for a setuid or setgid
1353 script to even be allowed to attempt. Generally speaking there will be
1354 another way to do what you want that is, if not secure, at least securable.
1357 =item No B<-e> allowed in setuid scripts
1359 (F) A setuid script can't be specified by the user.
1361 =item No comma allowed after %s
1363 (F) A list operator that has a filehandle or "indirect object" is not
1364 allowed to have a comma between that and the following arguments.
1365 Otherwise it'd be just another one of the arguments.
1367 One possible cause for this is that you expected to have imported a
1368 constant to your name space with B<use> or B<import> while no such
1369 importing took place, it may for example be that your operating system
1370 does not support that particular constant. Hopefully you did use an
1371 explicit import list for the constants you expect to see, please see
1372 L<perlfunc/use> and L<perlfunc/import>. While an explicit import list
1373 would probably have caught this error earlier it naturally does not
1374 remedy the fact that your operating system still does not support that
1375 constant. Maybe you have a typo in the constants of the symbol import
1376 list of B<use> or B<import> or in the constant name at the line where
1377 this error was triggered?
1379 =item No command into which to pipe on command line
1381 (F) An error peculiar to VMS. Perl handles its own command line redirection,
1382 and found a '|' at the end of the command line, so it doesn't know where you
1383 want to pipe the output from this command.
1385 =item No DB::DB routine defined
1387 (F) The currently executing code was compiled with the B<-d> switch,
1388 but for some reason the perl5db.pl file (or some facsimile thereof)
1389 didn't define a routine to be called at the beginning of each
1390 statement. Which is odd, because the file should have been required
1391 automatically, and should have blown up the require if it didn't parse
1394 =item No dbm on this machine
1396 (P) This is counted as an internal error, because every machine should
1397 supply dbm nowadays, because Perl comes with SDBM. See L<SDBM_File>.
1399 =item No DBsub routine
1401 (F) The currently executing code was compiled with the B<-d> switch,
1402 but for some reason the perl5db.pl file (or some facsimile thereof)
1403 didn't define a DB::sub routine to be called at the beginning of each
1404 ordinary subroutine call.
1406 =item No error file after 2E<gt> or 2E<gt>E<gt> on command line
1408 (F) An error peculiar to VMS. Perl handles its own command line redirection,
1409 and found a '2E<gt>' or a '2E<gt>E<gt>' on the command line, but can't find
1410 the name of the file to which to write data destined for stderr.
1412 =item No input file after E<lt> on command line
1414 (F) An error peculiar to VMS. Perl handles its own command line redirection,
1415 and found a 'E<lt>' on the command line, but can't find the name of the file
1416 from which to read data for stdin.
1418 =item No output file after E<gt> on command line
1420 (F) An error peculiar to VMS. Perl handles its own command line redirection,
1421 and found a lone 'E<gt>' at the end of the command line, so it doesn't know
1422 where you wanted to redirect stdout.
1424 =item No output file after E<gt> or E<gt>E<gt> on command line
1426 (F) An error peculiar to VMS. Perl handles its own command line redirection,
1427 and found a 'E<gt>' or a 'E<gt>E<gt>' on the command line, but can't find the
1428 name of the file to which to write data destined for stdout.
1430 =item No Perl script found in input
1432 (F) You called C<perl -x>, but no line was found in the file beginning
1433 with #! and containing the word "perl".
1435 =item No setregid available
1437 (F) Configure didn't find anything resembling the setregid() call for
1440 =item No setreuid available
1442 (F) Configure didn't find anything resembling the setreuid() call for
1445 =item No space allowed after B<-I>
1447 (F) The argument to B<-I> must follow the B<-I> immediately with no
1450 =item No such pipe open
1452 (P) An error peculiar to VMS. The internal routine my_pclose() tried to
1453 close a pipe which hadn't been opened. This should have been caught earlier as
1454 an attempt to close an unopened filehandle.
1456 =item No such signal: SIG%s
1458 (W) You specified a signal name as a subscript to %SIG that was not recognized.
1459 Say C<kill -l> in your shell to see the valid signal names on your system.
1461 =item Not a CODE reference
1463 (F) Perl was trying to evaluate a reference to a code value (that is, a
1464 subroutine), but found a reference to something else instead. You can
1465 use the ref() function to find out what kind of ref it really was.
1466 See also L<perlref>.
1468 =item Not a format reference
1470 (F) I'm not sure how you managed to generate a reference to an anonymous
1471 format, but this indicates you did, and that it didn't exist.
1473 =item Not a GLOB reference
1475 (F) Perl was trying to evaluate a reference to a "typeglob" (that is,
1476 a symbol table entry that looks like C<*foo>), but found a reference to
1477 something else instead. You can use the ref() function to find out
1478 what kind of ref it really was. See L<perlref>.
1480 =item Not a HASH reference
1482 (F) Perl was trying to evaluate a reference to a hash value, but
1483 found a reference to something else instead. You can use the ref()
1484 function to find out what kind of ref it really was. See L<perlref>.
1486 =item Not a perl script
1488 (F) The setuid emulator requires that scripts have a well-formed #! line
1489 even on machines that don't support the #! construct. The line must
1492 =item Not a SCALAR reference
1494 (F) Perl was trying to evaluate a reference to a scalar value, but
1495 found a reference to something else instead. You can use the ref()
1496 function to find out what kind of ref it really was. See L<perlref>.
1498 =item Not a subroutine reference
1500 (F) Perl was trying to evaluate a reference to a code value (that is, a
1501 subroutine), but found a reference to something else instead. You can
1502 use the ref() function to find out what kind of ref it really was.
1503 See also L<perlref>.
1505 =item Not a subroutine reference in overload table
1507 (F) An attempt was made to specify an entry in an overloading table that
1508 doesn't somehow point to a valid subroutine. See L<overload>.
1510 =item Not an ARRAY reference
1512 (F) Perl was trying to evaluate a reference to an array value, but
1513 found a reference to something else instead. You can use the ref()
1514 function to find out what kind of ref it really was. See L<perlref>.
1516 =item Not enough arguments for %s
1518 (F) The function requires more arguments than you specified.
1520 =item Not enough format arguments
1522 (W) A format specified more picture fields than the next line supplied.
1525 =item Null filename used
1527 (F) You can't require the null filename, especially because on many machines
1528 that means the current directory! See L<perlfunc/require>.
1530 =item Null picture in formline
1532 (F) The first argument to formline must be a valid format picture
1533 specification. It was found to be empty, which probably means you
1534 supplied it an uninitialized value. See L<perlform>.
1536 =item NULL OP IN RUN
1538 (P) Some internal routine called run() with a null opcode pointer.
1542 (P) An attempt was made to realloc NULL.
1544 =item NULL regexp argument
1546 (P) The internal pattern matching routines blew it big time.
1548 =item NULL regexp parameter
1550 (P) The internal pattern matching routines are out of their gourd.
1552 =item Odd number of elements in hash list
1554 (S) You specified an odd number of elements to a hash list, which is odd,
1555 because hash lists come in key/value pairs.
1557 =item Offset outside string
1559 (F) You tried to do a read/write/send/recv operation with an offset
1560 pointing outside the buffer. This is difficult to imagine.
1561 The sole exception to this is that C<sysread()>ing past the buffer
1562 will extend the buffer and zero pad the new area.
1566 (S) An internal warning that the grammar is screwed up.
1570 (S) An internal warning that the grammar is screwed up.
1572 =item Operation `%s': no method found,%s
1574 (F) An attempt was made to perform an overloaded operation for which
1575 no handler was defined. While some handlers can be autogenerated in
1576 terms of other handlers, there is no default handler for any
1577 operation, unless C<fallback> overloading key is specified to be
1578 true. See L<overload>.
1580 =item Operator or semicolon missing before %s
1582 (S) You used a variable or subroutine call where the parser was
1583 expecting an operator. The parser has assumed you really meant
1584 to use an operator, but this is highly likely to be incorrect.
1585 For example, if you say "*foo *foo" it will be interpreted as
1586 if you said "*foo * 'foo'".
1588 =item Out of memory for yacc stack
1590 (F) The yacc parser wanted to grow its stack so it could continue parsing,
1591 but realloc() wouldn't give it more memory, virtual or otherwise.
1593 =item Out of memory!
1595 (X|F) The malloc() function returned 0, indicating there was insufficient
1596 remaining memory (or virtual memory) to satisfy the request.
1598 The request was judged to be small, so the possibility to trap it
1599 depends on the way perl was compiled. By default it is not trappable.
1600 However, if compiled for this, Perl may use the contents of C<$^M> as
1601 an emergency pool after die()ing with this message. In this case the
1602 error is trappable I<once>.
1604 =item Out of memory during request for %s
1606 (F) The malloc() function returned 0, indicating there was insufficient
1607 remaining memory (or virtual memory) to satisfy the request. However,
1608 the request was judged large enough (compile-time default is 64K), so
1609 a possibility to shut down by trapping this error is granted.
1613 (W) A single call to write() produced more lines than can fit on a page.
1616 =item panic: ck_grep
1618 (P) Failed an internal consistency check trying to compile a grep.
1620 =item panic: ck_split
1622 (P) Failed an internal consistency check trying to compile a split.
1624 =item panic: corrupt saved stack index
1626 (P) The savestack was requested to restore more localized values than there
1627 are in the savestack.
1631 (P) We popped the context stack to an eval context, and then discovered
1632 it wasn't an eval context.
1634 =item panic: do_match
1636 (P) The internal pp_match() routine was called with invalid operational data.
1638 =item panic: do_split
1640 (P) Something terrible went wrong in setting up for the split.
1642 =item panic: do_subst
1644 (P) The internal pp_subst() routine was called with invalid operational data.
1646 =item panic: do_trans
1648 (P) The internal do_trans() routine was called with invalid operational data.
1652 (P) We popped the context stack to a context with the specified label,
1653 and then discovered it wasn't a context we know how to do a goto in.
1655 =item panic: INTERPCASEMOD
1657 (P) The lexer got into a bad state at a case modifier.
1659 =item panic: INTERPCONCAT
1661 (P) The lexer got into a bad state parsing a string with brackets.
1665 (P) We popped the context stack to a block context, and then discovered
1666 it wasn't a block context.
1668 =item panic: leave_scope clearsv
1670 (P) A writable lexical variable became read-only somehow within the scope.
1672 =item panic: leave_scope inconsistency
1674 (P) The savestack probably got out of sync. At least, there was an
1675 invalid enum on the top of it.
1679 (P) Something requested a negative number of bytes of malloc.
1681 =item panic: mapstart
1683 (P) The compiler is screwed up with respect to the map() function.
1685 =item panic: null array
1687 (P) One of the internal array routines was passed a null AV pointer.
1689 =item panic: pad_alloc
1691 (P) The compiler got confused about which scratch pad it was allocating
1692 and freeing temporaries and lexicals from.
1694 =item panic: pad_free curpad
1696 (P) The compiler got confused about which scratch pad it was allocating
1697 and freeing temporaries and lexicals from.
1699 =item panic: pad_free po
1701 (P) An invalid scratch pad offset was detected internally.
1703 =item panic: pad_reset curpad
1705 (P) The compiler got confused about which scratch pad it was allocating
1706 and freeing temporaries and lexicals from.
1708 =item panic: pad_sv po
1710 (P) An invalid scratch pad offset was detected internally.
1712 =item panic: pad_swipe curpad
1714 (P) The compiler got confused about which scratch pad it was allocating
1715 and freeing temporaries and lexicals from.
1717 =item panic: pad_swipe po
1719 (P) An invalid scratch pad offset was detected internally.
1721 =item panic: pp_iter
1723 (P) The foreach iterator got called in a non-loop context frame.
1725 =item panic: realloc
1727 (P) Something requested a negative number of bytes of realloc.
1729 =item panic: restartop
1731 (P) Some internal routine requested a goto (or something like it), and
1732 didn't supply the destination.
1736 (P) We popped the context stack to a subroutine or eval context, and
1737 then discovered it wasn't a subroutine or eval context.
1739 =item panic: scan_num
1741 (P) scan_num() got called on something that wasn't a number.
1743 =item panic: sv_insert
1745 (P) The sv_insert() routine was told to remove more string than there
1748 =item panic: top_env
1750 (P) The compiler attempted to do a goto, or something weird like that.
1754 (P) The lexer got into a bad state while processing a case modifier.
1756 =item Pareneses missing around "%s" list
1758 (W) You said something like
1764 my ($foo, $bar) = @_;
1766 Remember that "my" and "local" bind closer than comma.
1768 =item Perl %3.3f required--this is only version %s, stopped
1770 (F) The module in question uses features of a version of Perl more recent
1771 than the currently running version. How long has it been since you upgraded,
1772 anyway? See L<perlfunc/require>.
1774 =item Permission denied
1776 (F) The setuid emulator in suidperl decided you were up to no good.
1778 =item pid %d not a child
1780 (W) A warning peculiar to VMS. Waitpid() was asked to wait for a process which
1781 isn't a subprocess of the current process. While this is fine from VMS'
1782 perspective, it's probably not what you intended.
1784 =item POSIX getpgrp can't take an argument
1786 (F) Your C compiler uses POSIX getpgrp(), which takes no argument, unlike
1787 the BSD version, which takes a pid.
1789 =item Possible attempt to put comments in qw() list
1791 (W) qw() lists contain items separated by whitespace; as with literal
1792 strings, comment characters are not ignored, but are instead treated
1793 as literal data. (You may have used different delimiters than the
1794 exclamation marks parentheses shown here; braces are also frequently
1797 You probably wrote something like this:
1804 when you should have written this:
1811 If you really want comments, build your list the
1812 old-fashioned way, with quotes and commas:
1816 'b', # another comment
1819 =item Possible attempt to separate words with commas
1821 (W) qw() lists contain items separated by whitespace; therefore commas
1822 aren't needed to separate the items. (You may have used different
1823 delimiters than the parentheses shown here; braces are also frequently
1826 You probably wrote something like this:
1830 which puts literal commas into some of the list items. Write it without
1831 commas if you don't want them to appear in your data:
1835 =item Possible memory corruption: %s overflowed 3rd argument
1837 (F) An ioctl() or fcntl() returned more than Perl was bargaining for.
1838 Perl guesses a reasonable buffer size, but puts a sentinel byte at the
1839 end of the buffer just in case. This sentinel byte got clobbered, and
1840 Perl assumes that memory is now corrupted. See L<perlfunc/ioctl>.
1842 =item Precedence problem: open %s should be open(%s)
1844 (S) The old irregular construct
1848 is now misinterpreted as
1852 because of the strict regularization of Perl 5's grammar into unary
1853 and list operators. (The old open was a little of both.) You must
1854 put parentheses around the filehandle, or use the new "or" operator
1857 =item print on closed filehandle %s
1859 (W) The filehandle you're printing on got itself closed sometime before now.
1860 Check your logic flow.
1862 =item printf on closed filehandle %s
1864 (W) The filehandle you're writing to got itself closed sometime before now.
1865 Check your logic flow.
1867 =item Probable precedence problem on %s
1869 (W) The compiler found a bareword where it expected a conditional,
1870 which often indicates that an || or && was parsed as part of the
1871 last argument of the previous construct, for example:
1875 =item Prototype mismatch: %s vs %s
1877 (S) The subroutine being declared or defined had previously been declared
1878 or defined with a different function prototype.
1880 =item Read on closed filehandle E<lt>%sE<gt>
1882 (W) The filehandle you're reading from got itself closed sometime before now.
1883 Check your logic flow.
1885 =item Reallocation too large: %lx
1887 (F) You can't allocate more than 64K on an MS-DOS machine.
1889 =item Recompile perl with B<-D>DEBUGGING to use B<-D> switch
1891 (F) You can't use the B<-D> option unless the code to produce the
1892 desired output is compiled into Perl, which entails some overhead,
1893 which is why it's currently left out of your copy.
1895 =item Recursive inheritance detected
1897 (F) More than 100 levels of inheritance were used. Probably indicates
1898 an unintended loop in your inheritance hierarchy.
1900 =item Reference miscount in sv_replace()
1902 (W) The internal sv_replace() function was handed a new SV with a
1903 reference count of other than 1.
1905 =item regexp memory corruption
1907 (P) The regular expression engine got confused by what the regular
1908 expression compiler gave it.
1910 =item regexp out of space
1912 (P) A "can't happen" error, because safemalloc() should have caught it earlier.
1914 =item regexp too big
1916 (F) The current implementation of regular expressions uses shorts as
1917 address offsets within a string. Unfortunately this means that if
1918 the regular expression compiles to longer than 32767, it'll blow up.
1919 Usually when you want a regular expression this big, there is a better
1920 way to do it with multiple statements. See L<perlre>.
1922 =item Reversed %s= operator
1924 (W) You wrote your assignment operator backwards. The = must always
1925 comes last, to avoid ambiguity with subsequent unary operators.
1927 =item Runaway format
1929 (F) Your format contained the ~~ repeat-until-blank sequence, but it
1930 produced 200 lines at once, and the 200th line looked exactly like the
1931 199th line. Apparently you didn't arrange for the arguments to exhaust
1932 themselves, either by using ^ instead of @ (for scalar variables), or by
1933 shifting or popping (for array variables). See L<perlform>.
1935 =item Scalar value @%s[%s] better written as $%s[%s]
1937 (W) You've used an array slice (indicated by @) to select a single element of
1938 an array. Generally it's better to ask for a scalar value (indicated by $).
1939 The difference is that C<$foo[&bar]> always behaves like a scalar, both when
1940 assigning to it and when evaluating its argument, while C<@foo[&bar]> behaves
1941 like a list when you assign to it, and provides a list context to its
1942 subscript, which can do weird things if you're expecting only one subscript.
1944 On the other hand, if you were actually hoping to treat the array
1945 element as a list, you need to look into how references work, because
1946 Perl will not magically convert between scalars and lists for you. See
1949 =item Scalar value @%s{%s} better written as $%s{%s}
1951 (W) You've used a hash slice (indicated by @) to select a single element of
1952 a hash. Generally it's better to ask for a scalar value (indicated by $).
1953 The difference is that C<$foo{&bar}> always behaves like a scalar, both when
1954 assigning to it and when evaluating its argument, while C<@foo{&bar}> behaves
1955 like a list when you assign to it, and provides a list context to its
1956 subscript, which can do weird things if you're expecting only one subscript.
1958 On the other hand, if you were actually hoping to treat the hash
1959 element as a list, you need to look into how references work, because
1960 Perl will not magically convert between scalars and lists for you. See
1963 =item Script is not setuid/setgid in suidperl
1965 (F) Oddly, the suidperl program was invoked on a script without a setuid
1966 or setgid bit set. This doesn't make much sense.
1968 =item Search pattern not terminated
1970 (F) The lexer couldn't find the final delimiter of a // or m{}
1971 construct. Remember that bracketing delimiters count nesting level.
1973 =item seek() on unopened file
1975 (W) You tried to use the seek() function on a filehandle that was either
1976 never opened or has since been closed.
1978 =item select not implemented
1980 (F) This machine doesn't implement the select() system call.
1982 =item sem%s not implemented
1984 (F) You don't have System V semaphore IPC on your system.
1986 =item semi-panic: attempt to dup freed string
1988 (S) The internal newSVsv() routine was called to duplicate a scalar
1989 that had previously been marked as free.
1991 =item Semicolon seems to be missing
1993 (W) A nearby syntax error was probably caused by a missing semicolon,
1994 or possibly some other missing operator, such as a comma.
1996 =item Send on closed socket
1998 (W) The filehandle you're sending to got itself closed sometime before now.
1999 Check your logic flow.
2001 =item Sequence (?#... not terminated
2003 (F) A regular expression comment must be terminated by a closing
2004 parenthesis. Embedded parentheses aren't allowed. See L<perlre>.
2006 =item Sequence (?%s...) not implemented
2008 (F) A proposed regular expression extension has the character reserved
2009 but has not yet been written. See L<perlre>.
2011 =item Sequence (?%s...) not recognized
2013 (F) You used a regular expression extension that doesn't make sense.
2018 Also known as "500 Server error".
2020 B<This is a CGI error, not a Perl error>.
2022 You need to make sure your script is executable, is accessible by the user
2023 CGI is running the script under (which is probably not the user account you
2024 tested it under), does not rely on any environment variables (like PATH)
2025 from the user it isn't running under, and isn't in a location where the CGI
2026 server can't find it, basically, more or less. Please see the following
2027 for more information:
2029 http://www.perl.com/perl/faq/idiots-guide.html
2030 http://www.perl.com/perl/faq/perl-cgi-faq.html
2031 ftp://rtfm.mit.edu/pub/usenet/news.answers/www/cgi-faq
2032 http://hoohoo.ncsa.uiuc.edu/cgi/interface.html
2033 http://www-genome.wi.mit.edu/WWW/faqs/www-security-faq.html
2035 =item setegid() not implemented
2037 (F) You tried to assign to C<$)>, and your operating system doesn't support
2038 the setegid() system call (or equivalent), or at least Configure didn't
2041 =item seteuid() not implemented
2043 (F) You tried to assign to C<$E<gt>>, and your operating system doesn't support
2044 the seteuid() system call (or equivalent), or at least Configure didn't
2047 =item setrgid() not implemented
2049 (F) You tried to assign to C<$(>, and your operating system doesn't support
2050 the setrgid() system call (or equivalent), or at least Configure didn't
2053 =item setruid() not implemented
2055 (F) You tried to assign to C<$<lt>>, and your operating system doesn't support
2056 the setruid() system call (or equivalent), or at least Configure didn't
2059 =item Setuid/gid script is writable by world
2061 (F) The setuid emulator won't run a script that is writable by the world,
2062 because the world might have written on it already.
2064 =item shm%s not implemented
2066 (F) You don't have System V shared memory IPC on your system.
2068 =item shutdown() on closed fd
2070 (W) You tried to do a shutdown on a closed socket. Seems a bit superfluous.
2072 =item SIG%s handler "%s" not defined
2074 (W) The signal handler named in %SIG doesn't, in fact, exist. Perhaps you
2075 put it into the wrong package?
2077 =item sort is now a reserved word
2079 (F) An ancient error message that almost nobody ever runs into anymore.
2080 But before sort was a keyword, people sometimes used it as a filehandle.
2082 =item Sort subroutine didn't return a numeric value
2084 (F) A sort comparison routine must return a number. You probably blew
2085 it by not using C<E<lt>=E<gt>> or C<cmp>, or by not using them correctly.
2086 See L<perlfunc/sort>.
2088 =item Sort subroutine didn't return single value
2090 (F) A sort comparison subroutine may not return a list value with more
2091 or less than one element. See L<perlfunc/sort>.
2095 (P) The split was looping infinitely. (Obviously, a split shouldn't iterate
2096 more times than there are characters of input, which is what happened.)
2097 See L<perlfunc/split>.
2099 =item Stat on unopened file E<lt>%sE<gt>
2101 (W) You tried to use the stat() function (or an equivalent file test)
2102 on a filehandle that was either never opened or has since been closed.
2104 =item Statement unlikely to be reached
2106 (W) You did an exec() with some statement after it other than a die().
2107 This is almost always an error, because exec() never returns unless
2108 there was a failure. You probably wanted to use system() instead,
2109 which does return. To suppress this warning, put the exec() in a block
2112 =item Stub found while resolving method `%s' overloading `%s' in package `%s'
2114 (P) Overloading resolution over @ISA tree may be broken by importation stubs.
2115 Stubs should never be implicitely created, but explicit calls to C<can>
2118 =item Subroutine %s redefined
2120 (W) You redefined a subroutine. To suppress this warning, say
2124 eval "sub name { ... }";
2127 =item Substitution loop
2129 (P) The substitution was looping infinitely. (Obviously, a
2130 substitution shouldn't iterate more times than there are characters of
2131 input, which is what happened.) See the discussion of substitution in
2132 L<perlop/"Quote and Quote-like Operators">.
2134 =item Substitution pattern not terminated
2136 (F) The lexer couldn't find the interior delimiter of a s/// or s{}{}
2137 construct. Remember that bracketing delimiters count nesting level.
2139 =item Substitution replacement not terminated
2141 (F) The lexer couldn't find the final delimiter of a s/// or s{}{}
2142 construct. Remember that bracketing delimiters count nesting level.
2144 =item substr outside of string
2146 (W) You tried to reference a substr() that pointed outside of a string.
2147 That is, the absolute value of the offset was larger than the length of
2148 the string. See L<perlfunc/substr>.
2150 =item suidperl is no longer needed since %s
2152 (F) Your Perl was compiled with B<-D>SETUID_SCRIPTS_ARE_SECURE_NOW, but a
2153 version of the setuid emulator somehow got run anyway.
2157 (F) Probably means you had a syntax error. Common reasons include:
2159 A keyword is misspelled.
2160 A semicolon is missing.
2162 An opening or closing parenthesis is missing.
2163 An opening or closing brace is missing.
2164 A closing quote is missing.
2166 Often there will be another error message associated with the syntax
2167 error giving more information. (Sometimes it helps to turn on B<-w>.)
2168 The error message itself often tells you where it was in the line when
2169 it decided to give up. Sometimes the actual error is several tokens
2170 before this, because Perl is good at understanding random input.
2171 Occasionally the line number may be misleading, and once in a blue moon
2172 the only way to figure out what's triggering the error is to call
2173 C<perl -c> repeatedly, chopping away half the program each time to see
2174 if the error went away. Sort of the cybernetic version of S<20 questions>.
2176 =item syntax error at line %d: `%s' unexpected
2178 (A) You've accidentally run your script through the Bourne shell
2179 instead of Perl. Check the #! line, or manually feed your script
2182 =item System V IPC is not implemented on this machine
2184 (F) You tried to do something with a function beginning with "sem", "shm",
2185 or "msg". See L<perlfunc/semctl>, for example.
2187 =item Syswrite on closed filehandle
2189 (W) The filehandle you're writing to got itself closed sometime before now.
2190 Check your logic flow.
2192 =item tell() on unopened file
2194 (W) You tried to use the tell() function on a filehandle that was either
2195 never opened or has since been closed.
2197 =item Test on unopened file E<lt>%sE<gt>
2199 (W) You tried to invoke a file test operator on a filehandle that isn't
2200 open. Check your logic. See also L<perlfunc/-X>.
2202 =item That use of $[ is unsupported
2204 (F) Assignment to C<$[> is now strictly circumscribed, and interpreted as
2205 a compiler directive. You may say only one of
2214 This is to prevent the problem of one module changing the array base
2215 out from under another module inadvertently. See L<perlvar/$[>.
2217 =item The %s function is unimplemented
2219 The function indicated isn't implemented on this architecture, according
2220 to the probings of Configure.
2222 =item The crypt() function is unimplemented due to excessive paranoia
2224 (F) Configure couldn't find the crypt() function on your machine,
2225 probably because your vendor didn't supply it, probably because they
2226 think the U.S. Government thinks it's a secret, or at least that they
2227 will continue to pretend that it is. And if you quote me on that, I
2230 =item The stat preceding C<-l _> wasn't an lstat
2232 (F) It makes no sense to test the current stat buffer for symbolic linkhood
2233 if the last stat that wrote to the stat buffer already went past
2234 the symlink to get to the real file. Use an actual filename instead.
2236 =item times not implemented
2238 (F) Your version of the C library apparently doesn't do times(). I suspect
2239 you're not running on Unix.
2241 =item Too few args to syscall
2243 (F) There has to be at least one argument to syscall() to specify the
2244 system call to call, silly dilly.
2246 =item Too late for "B<-T>" option
2248 (X) The #! line (or local equivalent) in a Perl script contains the
2249 B<-T> option, but Perl was not invoked with B<-T> in its argument
2250 list. This is an error because, by the time Perl discovers a B<-T> in
2251 a script, it's too late to properly taint everything from the
2252 environment. So Perl gives up.
2254 If the Perl script is being executed as a command using the #!
2255 mechanism (or its local equivalent), this error can usually be fixed
2256 by editing the #! line so that the B<-T> option is a part of Perl's
2257 first argument: e.g. change C<perl -n -T> to C<perl -T -n>.
2259 If the Perl script is being executed as C<perl scriptname>, then the
2260 B<-T> option must appear on the command line: C<perl -T scriptname>.
2266 (A) You've accidentally run your script through B<csh> instead
2267 of Perl. Check the #! line, or manually feed your script into
2270 =item Too many args to syscall
2272 (F) Perl supports a maximum of only 14 args to syscall().
2274 =item Too many arguments for %s
2276 (F) The function requires fewer arguments than you specified.
2278 =item trailing \ in regexp
2280 (F) The regular expression ends with an unbackslashed backslash. Backslash
2283 =item Translation pattern not terminated
2285 (F) The lexer couldn't find the interior delimiter of a tr/// or tr[][]
2288 =item Translation replacement not terminated
2290 (F) The lexer couldn't find the final delimiter of a tr/// or tr[][]
2293 =item truncate not implemented
2295 (F) Your machine doesn't implement a file truncation mechanism that
2296 Configure knows about.
2298 =item Type of arg %d to %s must be %s (not %s)
2300 (F) This function requires the argument in that position to be of a
2301 certain type. Arrays must be @NAME or C<@{EXPR}>. Hashes must be
2302 %NAME or C<%{EXPR}>. No implicit dereferencing is allowed--use the
2303 {EXPR} forms as an explicit dereference. See L<perlref>.
2305 =item umask: argument is missing initial 0
2307 (W) A umask of 222 is incorrect. It should be 0222, because octal literals
2308 always start with 0 in Perl, as in C.
2310 =item Unable to create sub named "%s"
2312 (F) You attempted to create or access a subroutine with an illegal name.
2314 =item Unbalanced context: %d more PUSHes than POPs
2316 (W) The exit code detected an internal inconsistency in how many execution
2317 contexts were entered and left.
2319 =item Unbalanced saves: %d more saves than restores
2321 (W) The exit code detected an internal inconsistency in how many
2322 values were temporarily localized.
2324 =item Unbalanced scopes: %d more ENTERs than LEAVEs
2326 (W) The exit code detected an internal inconsistency in how many blocks
2327 were entered and left.
2329 =item Unbalanced tmps: %d more allocs than frees
2331 (W) The exit code detected an internal inconsistency in how many mortal
2332 scalars were allocated and freed.
2334 =item Undefined format "%s" called
2336 (F) The format indicated doesn't seem to exist. Perhaps it's really in
2337 another package? See L<perlform>.
2339 =item Undefined sort subroutine "%s" called
2341 (F) The sort comparison routine specified doesn't seem to exist. Perhaps
2342 it's in a different package? See L<perlfunc/sort>.
2344 =item Undefined subroutine &%s called
2346 (F) The subroutine indicated hasn't been defined, or if it was, it
2347 has since been undefined.
2349 =item Undefined subroutine called
2351 (F) The anonymous subroutine you're trying to call hasn't been defined,
2352 or if it was, it has since been undefined.
2354 =item Undefined subroutine in sort
2356 (F) The sort comparison routine specified is declared but doesn't seem to
2357 have been defined yet. See L<perlfunc/sort>.
2359 =item Undefined top format "%s" called
2361 (F) The format indicated doesn't seem to exist. Perhaps it's really in
2362 another package? See L<perlform>.
2364 =item unexec of %s into %s failed!
2366 (F) The unexec() routine failed for some reason. See your local FSF
2367 representative, who probably put it there in the first place.
2369 =item Unknown BYTEORDER
2371 (F) There are no byte-swapping functions for a machine with this byte order.
2373 =item unmatched () in regexp
2375 (F) Unbackslashed parentheses must always be balanced in regular
2376 expressions. If you're a vi user, the % key is valuable for finding
2377 the matching parenthesis. See L<perlre>.
2379 =item Unmatched right bracket
2381 (F) The lexer counted more closing curly brackets (braces) than opening
2382 ones, so you're probably missing an opening bracket. As a general
2383 rule, you'll find the missing one (so to speak) near the place you were
2386 =item unmatched [] in regexp
2388 (F) The brackets around a character class must match. If you wish to
2389 include a closing bracket in a character class, backslash it or put it first.
2392 =item Unquoted string "%s" may clash with future reserved word
2394 (W) You used a bareword that might someday be claimed as a reserved word.
2395 It's best to put such a word in quotes, or capitalize it somehow, or insert
2396 an underbar into it. You might also declare it as a subroutine.
2398 =item Unrecognized character %s
2400 (F) The Perl parser has no idea what to do with the specified character
2401 in your Perl script (or eval). Perhaps you tried to run a compressed
2402 script, a binary program, or a directory as a Perl program.
2404 =item Unrecognized signal name "%s"
2406 (F) You specified a signal name to the kill() function that was not recognized.
2407 Say C<kill -l> in your shell to see the valid signal names on your system.
2409 =item Unrecognized switch: -%s
2411 (F) You specified an illegal option to Perl. Don't do that.
2412 (If you think you didn't do that, check the #! line to see if it's
2413 supplying the bad switch on your behalf.)
2415 =item Unsuccessful %s on filename containing newline
2417 (W) A file operation was attempted on a filename, and that operation
2418 failed, PROBABLY because the filename contained a newline, PROBABLY
2419 because you forgot to chop() or chomp() it off. See L<perlfunc/chomp>.
2421 =item Unsupported directory function "%s" called
2423 (F) Your machine doesn't support opendir() and readdir().
2425 =item Unsupported function fork
2427 (F) Your version of executable does not support forking.
2429 Note that under some systems, like OS/2, there may be different flavors of
2430 Perl executables, some of which may support fork, some not. Try changing
2431 the name you call Perl by to C<perl_>, C<perl__>, and so on.
2433 =item Unsupported function %s
2435 (F) This machines doesn't implement the indicated function, apparently.
2436 At least, Configure doesn't think so.
2438 =item Unsupported socket function "%s" called
2440 (F) Your machine doesn't support the Berkeley socket mechanism, or at
2441 least that's what Configure thought.
2443 =item Unterminated E<lt>E<gt> operator
2445 (F) The lexer saw a left angle bracket in a place where it was expecting
2446 a term, so it's looking for the corresponding right angle bracket, and not
2447 finding it. Chances are you left some needed parentheses out earlier in
2448 the line, and you really meant a "less than".
2450 =item Use of $# is deprecated
2452 (D) This was an ill-advised attempt to emulate a poorly defined B<awk> feature.
2453 Use an explicit printf() or sprintf() instead.
2455 =item Use of $* is deprecated
2457 (D) This variable magically turned on multi-line pattern matching, both for
2458 you and for any luckless subroutine that you happen to call. You should
2459 use the new C<//m> and C<//s> modifiers now to do that without the dangerous
2460 action-at-a-distance effects of C<$*>.
2462 =item Use of %s in printf format not supported
2464 (F) You attempted to use a feature of printf that is accessible from
2465 only C. This usually means there's a better way to do it in Perl.
2467 =item Use of bare E<lt>E<lt> to mean E<lt>E<lt>"" is deprecated
2469 (D) You are now encouraged to use the explicitly quoted form if you
2470 wish to use an empty line as the terminator of the here-document.
2472 =item Use of implicit split to @_ is deprecated
2474 (D) It makes a lot of work for the compiler when you clobber a
2475 subroutine's argument list, so it's better if you assign the results of
2476 a split() explicitly to an array (or list).
2478 =item Use of inherited AUTOLOAD for non-method %s() is deprecated
2480 As an (ahem) accidental feature, C<AUTOLOAD> subroutines are looked up
2481 as methods (using the C<@ISA> hierarchy) even when the subroutines to be
2482 autoloaded were called as plain functions (e.g. C<Foo::bar()>), not as
2483 methods (e.g. C<Foo->bar()> or C<$obj->bar()>).
2485 This bug will be rectified in Perl 5.005, which will use method lookup
2486 only for methods' C<AUTOLOAD>s. However, there is a significant base
2487 of existing code that may be using the old behavior. So, as an
2488 interim step, Perl 5.004 issues an optional warning when non-methods
2489 use inherited C<AUTOLOAD>s.
2491 The simple rule is: Inheritance will not work when autoloading
2492 non-methods. The simple fix for old code is: In any module that used to
2493 depend on inheriting C<AUTOLOAD> for non-methods from a base class named
2494 C<BaseClass>, execute C<*AUTOLOAD = \&BaseClass::AUTOLOAD> during startup.
2496 =item Use of %s is deprecated
2498 (D) The construct indicated is no longer recommended for use, generally
2499 because there's a better way to do it, and also because the old way has
2502 =item Use of uninitialized value
2504 (W) An undefined value was used as if it were already defined. It was
2505 interpreted as a "" or a 0, but maybe it was a mistake. To suppress this
2506 warning assign an initial value to your variables.
2508 =item Useless use of %s in void context
2510 (W) You did something without a side effect in a context that does nothing
2511 with the return value, such as a statement that doesn't return a value
2512 from a block, or the left side of a scalar comma operator. Very often
2513 this points not to stupidity on your part, but a failure of Perl to parse
2514 your program the way you thought it would. For example, you'd get this
2515 if you mixed up your C precedence with Python precedence and said
2519 when you meant to say
2521 ($one, $two) = (1, 2);
2523 Another common error is to use ordinary parentheses to construct a list
2524 reference when you should be using square or curly brackets, for
2529 when you should have said
2533 The square brackets explicitly turn a list value into a scalar value,
2534 while parentheses do not. So when a parenthesized list is evaluated in
2535 a scalar context, the comma is treated like C's comma operator, which
2536 throws away the left argument, which is not what you want. See
2537 L<perlref> for more on this.
2539 =item untie attempted while %d inner references still exist
2541 (W) A copy of the object returned from C<tie> (or C<tied>) was still
2542 valid when C<untie> was called.
2544 =item Value of %s can be "0"; test with defined()
2546 (W) In a conditional expression, you used <HANDLE>, <*> (glob), C<each()>,
2547 or C<readdir()> as a boolean value. Each of these constructs can return a
2548 value of "0"; that would make the conditional expression false, which is
2549 probably not what you intended. When using these constructs in conditional
2550 expressions, test their values with the C<defined> operator.
2552 =item Variable "%s" is not imported%s
2554 (F) While "use strict" in effect, you referred to a global variable
2555 that you apparently thought was imported from another module, because
2556 something else of the same name (usually a subroutine) is exported
2557 by that module. It usually means you put the wrong funny character
2558 on the front of your variable.
2560 =item Variable "%s" may be unavailable
2562 (W) An inner (nested) I<anonymous> subroutine is inside a I<named>
2563 subroutine, and outside that is another subroutine; and the anonymous
2564 (innermost) subroutine is referencing a lexical variable defined in
2565 the outermost subroutine. For example:
2567 sub outermost { my $a; sub middle { sub { $a } } }
2569 If the anonymous subroutine is called or referenced (directly or
2570 indirectly) from the outermost subroutine, it will share the variable
2571 as you would expect. But if the anonymous subroutine is called or
2572 referenced when the outermost subroutine is not active, it will see
2573 the value of the shared variable as it was before and during the
2574 *first* call to the outermost subroutine, which is probably not what
2577 In these circumstances, it is usually best to make the middle
2578 subroutine anonymous, using the C<sub {}> syntax. Perl has specific
2579 support for shared variables in nested anonymous subroutines; a named
2580 subroutine in between interferes with this feature.
2582 =item Variable "%s" will not stay shared
2584 (W) An inner (nested) I<named> subroutine is referencing a lexical
2585 variable defined in an outer subroutine.
2587 When the inner subroutine is called, it will probably see the value of
2588 the outer subroutine's variable as it was before and during the
2589 *first* call to the outer subroutine; in this case, after the first
2590 call to the outer subroutine is complete, the inner and outer
2591 subroutines will no longer share a common value for the variable. In
2592 other words, the variable will no longer be shared.
2594 Furthermore, if the outer subroutine is anonymous and references a
2595 lexical variable outside itself, then the outer and inner subroutines
2596 will I<never> share the given variable.
2598 This problem can usually be solved by making the inner subroutine
2599 anonymous, using the C<sub {}> syntax. When inner anonymous subs that
2600 reference variables in outer subroutines are called or referenced,
2601 they are automatically rebound to the current values of such
2604 =item Variable syntax
2606 (A) You've accidentally run your script through B<csh> instead
2607 of Perl. Check the #! line, or manually feed your script into
2610 =item Warning: something's wrong
2612 (W) You passed warn() an empty string (the equivalent of C<warn "">) or
2613 you called it with no args and C<$_> was empty.
2615 =item Warning: unable to close filehandle %s properly
2617 (S) The implicit close() done by an open() got an error indication on the
2618 close(). This usually indicates your file system ran out of disk space.
2620 =item Warning: Use of "%s" without parentheses is ambiguous
2622 (S) You wrote a unary operator followed by something that looks like a
2623 binary operator that could also have been interpreted as a term or
2624 unary operator. For instance, if you know that the rand function
2625 has a default argument of 1.0, and you write
2629 you may THINK you wrote the same thing as
2633 but in actual fact, you got
2637 So put in parentheses to say what you really mean.
2639 =item Write on closed filehandle
2641 (W) The filehandle you're writing to got itself closed sometime before now.
2642 Check your logic flow.
2644 =item X outside of string
2646 (F) You had a pack template that specified a relative position before
2647 the beginning of the string being unpacked. See L<perlfunc/pack>.
2649 =item x outside of string
2651 (F) You had a pack template that specified a relative position after
2652 the end of the string being unpacked. See L<perlfunc/pack>.
2654 =item Xsub "%s" called in sort
2656 (F) The use of an external subroutine as a sort comparison is not yet supported.
2658 =item Xsub called in sort
2660 (F) The use of an external subroutine as a sort comparison is not yet supported.
2662 =item You can't use C<-l> on a filehandle
2664 (F) A filehandle represents an opened file, and when you opened the file it
2665 already went past any symlink you are presumably trying to look for.
2666 Use a filename instead.
2668 =item YOU HAVEN'T DISABLED SET-ID SCRIPTS IN THE KERNEL YET!
2670 (F) And you probably never will, because you probably don't have the
2671 sources to your kernel, and your vendor probably doesn't give a rip
2672 about what you want. Your best bet is to use the wrapsuid script in
2673 the eg directory to put a setuid C wrapper around your script.
2675 =item You need to quote "%s"
2677 (W) You assigned a bareword as a signal handler name. Unfortunately, you
2678 already have a subroutine of that name declared, which means that Perl 5
2679 will try to call the subroutine when the assignment is executed, which is
2680 probably not what you want. (If it IS what you want, put an & in front.)
2682 =item [gs]etsockopt() on closed fd
2684 (W) You tried to get or set a socket option on a closed socket.
2685 Did you forget to check the return value of your socket() call?
2686 See L<perlfunc/getsockopt>.
2688 =item \1 better written as $1
2690 (W) Outside of patterns, backreferences live on as variables. The use
2691 of backslashes is grandfathered on the right-hand side of a
2692 substitution, but stylistically it's better to use the variable form
2693 because other Perl programmers will expect it, and it works better
2694 if there are more than 9 backreferences.
2696 =item '|' and 'E<lt>' may not both be specified on command line
2698 (F) An error peculiar to VMS. Perl does its own command line redirection, and
2699 found that STDIN was a pipe, and that you also tried to redirect STDIN using
2700 'E<lt>'. Only one STDIN stream to a customer, please.
2702 =item '|' and 'E<gt>' may not both be specified on command line
2704 (F) An error peculiar to VMS. Perl does its own command line redirection, and
2705 thinks you tried to redirect stdout both to a file and into a pipe to another
2706 command. You need to choose one or the other, though nothing's stopping you
2707 from piping into a program or Perl script which 'splits' output into two
2710 open(OUT,">$ARGV[0]") or die "Can't write to $ARGV[0]: $!";
2717 =item Got an error from DosAllocMem
2719 (P) An error peculiar to OS/2. Most probably you're using an obsolete
2720 version of Perl, and this should not happen anyway.
2722 =item Malformed PERLLIB_PREFIX
2724 (F) An error peculiar to OS/2. PERLLIB_PREFIX should be of the form
2732 with nonempty prefix1 and prefix2. If C<prefix1> is indeed a prefix
2733 of a builtin library search path, prefix2 is substituted. The error
2734 may appear if components are not found, or are too long. See
2735 "PERLLIB_PREFIX" in F<README.os2>.
2737 =item PERL_SH_DIR too long
2739 (F) An error peculiar to OS/2. PERL_SH_DIR is the directory to find the
2740 C<sh>-shell in. See "PERL_SH_DIR" in F<README.os2>.
2742 =item Process terminated by SIG%s
2744 (W) This is a standard message issued by OS/2 applications, while *nix
2745 applications die in silence. It is considered a feature of the OS/2
2746 port. One can easily disable this by appropriate sighandlers, see
2747 L<perlipc/"Signals">. See also "Process terminated by SIGTERM/SIGINT"