3 perldiag - various Perl diagnostics
7 These messages are classified as follows (listed in increasing order of
10 (W) A warning (optional).
11 (D) A deprecation (optional).
12 (S) A severe warning (default).
13 (F) A fatal error (trappable).
14 (P) An internal error you should never see (trappable).
15 (X) A very fatal error (nontrappable).
16 (A) An alien error message (not generated by Perl).
18 The majority of messages from the first three classifications above
19 (W, D & S) can be controlled using the C<warnings> pragma.
21 If a message can be controlled by the C<warnings> pragma, its warning
22 category is included with the classification letter in the description
25 Optional warnings are enabled by using the C<warnings> pragma or the B<-w>
26 and B<-W> switches. Warnings may be captured by setting C<$SIG{__WARN__}>
27 to a reference to a routine that will be called on each warning instead
28 of printing it. See L<perlvar>.
30 Default warnings are always enabled unless they are explicitly disabled
31 with the C<warnings> pragma or the B<-X> switch.
33 Trappable errors may be trapped using the eval operator. See
34 L<perlfunc/eval>. In almost all cases, warnings may be selectively
35 disabled or promoted to fatal errors using the C<warnings> pragma.
38 The messages are in alphabetical order, without regard to upper or
39 lower-case. Some of these messages are generic. Spots that vary are
40 denoted with a %s or other printf-style escape. These escapes are
41 ignored by the alphabetical order, as are all characters other than
42 letters. To look up your message, just ignore anything that is not a
47 =item accept() on closed socket %s
49 (W closed) You tried to do an accept on a closed socket. Did you forget
50 to check the return value of your socket() call? See
53 =item Allocation too large: %lx
55 (X) You can't allocate more than 64K on an MS-DOS machine.
57 =item '%c' allowed only after types %s
59 (F) The modifiers '!', '<' and '>' are allowed in pack() or unpack() only
60 after certain types. See L<perlfunc/pack>.
62 =item Ambiguous call resolved as CORE::%s(), qualify as such or use &
64 (W ambiguous) A subroutine you have declared has the same name as a Perl
65 keyword, and you have used the name without qualification for calling
66 one or the other. Perl decided to call the builtin because the
67 subroutine is not imported.
69 To force interpretation as a subroutine call, either put an ampersand
70 before the subroutine name, or qualify the name with its package.
71 Alternatively, you can import the subroutine (or pretend that it's
72 imported with the C<use subs> pragma).
74 To silently interpret it as the Perl operator, use the C<CORE::> prefix
75 on the operator (e.g. C<CORE::log($x)>) or declare the subroutine
76 to be an object method (see L<perlsub/"Subroutine Attributes"> or
79 =item Ambiguous range in transliteration operator
81 (F) You wrote something like C<tr/a-z-0//> which doesn't mean anything at
82 all. To include a C<-> character in a transliteration, put it either
83 first or last. (In the past, C<tr/a-z-0//> was synonymous with
84 C<tr/a-y//>, which was probably not what you would have expected.)
86 =item Ambiguous use of %s resolved as %s
88 (W ambiguous)(S) You said something that may not be interpreted the way
89 you thought. Normally it's pretty easy to disambiguate it by supplying
90 a missing quote, operator, parenthesis pair or declaration.
92 =item '|' and '<' may not both be specified on command line
94 (F) An error peculiar to VMS. Perl does its own command line
95 redirection, and found that STDIN was a pipe, and that you also tried to
96 redirect STDIN using '<'. Only one STDIN stream to a customer, please.
98 =item '|' and '>' may not both be specified on command line
100 (F) An error peculiar to VMS. Perl does its own command line
101 redirection, and thinks you tried to redirect stdout both to a file and
102 into a pipe to another command. You need to choose one or the other,
103 though nothing's stopping you from piping into a program or Perl script
104 which 'splits' output into two streams, such as
106 open(OUT,">$ARGV[0]") or die "Can't write to $ARGV[0]: $!";
113 =item Applying %s to %s will act on scalar(%s)
115 (W misc) The pattern match (C<//>), substitution (C<s///>), and
116 transliteration (C<tr///>) operators work on scalar values. If you apply
117 one of them to an array or a hash, it will convert the array or hash to
118 a scalar value -- the length of an array, or the population info of a
119 hash -- and then work on that scalar value. This is probably not what
120 you meant to do. See L<perlfunc/grep> and L<perlfunc/map> for
123 =item Args must match #! line
125 (F) The setuid emulator requires that the arguments Perl was invoked
126 with match the arguments specified on the #! line. Since some systems
127 impose a one-argument limit on the #! line, try combining switches;
128 for example, turn C<-w -U> into C<-wU>.
130 =item Arg too short for msgsnd
132 (F) msgsnd() requires a string at least as long as sizeof(long).
134 =item %s argument is not a HASH or ARRAY element
136 (F) The argument to exists() must be a hash or array element, such as:
141 =item %s argument is not a HASH or ARRAY element or slice
143 (F) The argument to delete() must be either a hash or array element,
149 or a hash or array slice, such as:
151 @foo[$bar, $baz, $xyzzy]
152 @{$ref->[12]}{"susie", "queue"}
154 =item %s argument is not a subroutine name
156 (F) The argument to exists() for C<exists &sub> must be a subroutine
157 name, and not a subroutine call. C<exists &sub()> will generate this
160 =item Argument "%s" isn't numeric%s
162 (W numeric) The indicated string was fed as an argument to an operator
163 that expected a numeric value instead. If you're fortunate the message
164 will identify which operator was so unfortunate.
166 =item Argument list not closed for PerlIO layer "%s"
168 (W layer) When pushing a layer with arguments onto the Perl I/O system you
169 forgot the ) that closes the argument list. (Layers take care of transforming
170 data between external and internal representations.) Perl stopped parsing
171 the layer list at this point and did not attempt to push this layer.
172 If your program didn't explicitly request the failing operation, it may be
173 the result of the value of the environment variable PERLIO.
175 =item Array @%s missing the @ in argument %d of %s()
177 (D deprecated) Really old Perl let you omit the @ on array names in some
178 spots. This is now heavily deprecated.
180 =item assertion botched: %s
182 (P) The malloc package that comes with Perl had an internal failure.
184 =item Assertion failed: file "%s"
186 (P) A general assertion failed. The file in question must be examined.
188 =item Assignment to both a list and a scalar
190 (F) If you assign to a conditional operator, the 2nd and 3rd arguments
191 must either both be scalars or both be lists. Otherwise Perl won't
192 know which context to supply to the right side.
194 =item A thread exited while %d threads were running
196 (W) When using threaded Perl, a thread (not necessarily the main
197 thread) exited while there were still other threads running.
198 Usually it's a good idea to first collect the return values of the
199 created threads by joining them, and only then exit from the main
200 thread. See L<threads>.
202 =item Attempt to access disallowed key '%s' in a restricted hash
204 (F) The failing code has attempted to get or set a key which is not in
205 the current set of allowed keys of a restricted hash.
207 =item Attempt to bless into a reference
209 (F) The CLASSNAME argument to the bless() operator is expected to be
210 the name of the package to bless the resulting object into. You've
211 supplied instead a reference to something: perhaps you wrote
217 bless $self, ref($proto) || $proto;
219 If you actually want to bless into the stringified version
220 of the reference supplied, you need to stringify it yourself, for
223 bless $self, "$proto";
225 =item Attempt to delete disallowed key '%s' from a restricted hash
227 (F) The failing code attempted to delete from a restricted hash a key
228 which is not in its key set.
230 =item Attempt to delete readonly key '%s' from a restricted hash
232 (F) The failing code attempted to delete a key whose value has been
233 declared readonly from a restricted hash.
235 =item Attempt to free non-arena SV: 0x%lx
237 (P internal) All SV objects are supposed to be allocated from arenas
238 that will be garbage collected on exit. An SV was discovered to be
239 outside any of those arenas.
241 =item Attempt to free nonexistent shared string
243 (P internal) Perl maintains a reference counted internal table of
244 strings to optimize the storage and access of hash keys and other
245 strings. This indicates someone tried to decrement the reference count
246 of a string that can no longer be found in the table.
248 =item Attempt to free temp prematurely
250 (W debugging) Mortalized values are supposed to be freed by the
251 free_tmps() routine. This indicates that something else is freeing the
252 SV before the free_tmps() routine gets a chance, which means that the
253 free_tmps() routine will be freeing an unreferenced scalar when it does
256 =item Attempt to free unreferenced glob pointers
258 (P internal) The reference counts got screwed up on symbol aliases.
260 =item Attempt to free unreferenced scalar
262 (W internal) Perl went to decrement the reference count of a scalar to
263 see if it would go to 0, and discovered that it had already gone to 0
264 earlier, and should have been freed, and in fact, probably was freed.
265 This could indicate that SvREFCNT_dec() was called too many times, or
266 that SvREFCNT_inc() was called too few times, or that the SV was
267 mortalized when it shouldn't have been, or that memory has been
270 =item Attempt to join self
272 (F) You tried to join a thread from within itself, which is an
273 impossible task. You may be joining the wrong thread, or you may need
274 to move the join() to some other thread.
276 =item Attempt to pack pointer to temporary value
278 (W pack) You tried to pass a temporary value (like the result of a
279 function, or a computed expression) to the "p" pack() template. This
280 means the result contains a pointer to a location that could become
281 invalid anytime, even before the end of the current statement. Use
282 literals or global values as arguments to the "p" pack() template to
285 =item Attempt to use reference as lvalue in substr
287 (W substr) You supplied a reference as the first argument to substr()
288 used as an lvalue, which is pretty strange. Perhaps you forgot to
289 dereference it first. See L<perlfunc/substr>.
291 =item Bad arg length for %s, is %d, should be %s
293 (F) You passed a buffer of the wrong size to one of msgctl(), semctl()
294 or shmctl(). In C parlance, the correct sizes are, respectively,
295 S<sizeof(struct msqid_ds *)>, S<sizeof(struct semid_ds *)>, and
296 S<sizeof(struct shmid_ds *)>.
298 =item Bad evalled substitution pattern
300 (F) You've used the C</e> switch to evaluate the replacement for a
301 substitution, but perl found a syntax error in the code to evaluate,
302 most likely an unexpected right brace '}'.
304 =item Bad filehandle: %s
306 (F) A symbol was passed to something wanting a filehandle, but the
307 symbol has no filehandle associated with it. Perhaps you didn't do an
308 open(), or did it in another package.
310 =item Bad free() ignored
312 (S malloc) An internal routine called free() on something that had never
313 been malloc()ed in the first place. Mandatory, but can be disabled by
314 setting environment variable C<PERL_BADFREE> to 0.
316 This message can be seen quite often with DB_File on systems with "hard"
317 dynamic linking, like C<AIX> and C<OS/2>. It is a bug of C<Berkeley DB>
318 which is left unnoticed if C<DB> uses I<forgiving> system malloc().
322 (P) One of the internal hash routines was passed a null HV pointer.
324 =item Badly placed ()'s
326 (A) You've accidentally run your script through B<csh> instead
327 of Perl. Check the #! line, or manually feed your script into
330 =item Bad name after %s::
332 (F) You started to name a symbol by using a package prefix, and then
333 didn't finish the symbol. In particular, you can't interpolate outside
342 $sym = "mypack::$var";
344 =item Bad realloc() ignored
346 (S malloc) An internal routine called realloc() on something that had
347 never been malloc()ed in the first place. Mandatory, but can be disabled
348 by setting environment variable C<PERL_BADFREE> to 1.
350 =item Bad symbol for array
352 (P) An internal request asked to add an array entry to something that
353 wasn't a symbol table entry.
355 =item Bad symbol for filehandle
357 (P) An internal request asked to add a filehandle entry to something
358 that wasn't a symbol table entry.
360 =item Bad symbol for hash
362 (P) An internal request asked to add a hash entry to something that
363 wasn't a symbol table entry.
365 =item Bareword found in conditional
367 (W bareword) The compiler found a bareword where it expected a
368 conditional, which often indicates that an || or && was parsed as part
369 of the last argument of the previous construct, for example:
373 It may also indicate a misspelled constant that has been interpreted as
376 use constant TYPO => 1;
377 if (TYOP) { print "foo" }
379 The C<strict> pragma is useful in avoiding such errors.
381 =item Bareword "%s" not allowed while "strict subs" in use
383 (F) With "strict subs" in use, a bareword is only allowed as a
384 subroutine identifier, in curly brackets or to the left of the "=>"
385 symbol. Perhaps you need to predeclare a subroutine?
387 =item Bareword "%s" refers to nonexistent package
389 (W bareword) You used a qualified bareword of the form C<Foo::>, but the
390 compiler saw no other uses of that namespace before that point. Perhaps
391 you need to predeclare a package?
393 =item BEGIN failed--compilation aborted
395 (F) An untrapped exception was raised while executing a BEGIN
396 subroutine. Compilation stops immediately and the interpreter is
399 =item BEGIN not safe after errors--compilation aborted
401 (F) Perl found a C<BEGIN {}> subroutine (or a C<use> directive, which
402 implies a C<BEGIN {}>) after one or more compilation errors had already
403 occurred. Since the intended environment for the C<BEGIN {}> could not
404 be guaranteed (due to the errors), and since subsequent code likely
405 depends on its correct operation, Perl just gave up.
407 =item \1 better written as $1
409 (W syntax) Outside of patterns, backreferences live on as variables.
410 The use of backslashes is grandfathered on the right-hand side of a
411 substitution, but stylistically it's better to use the variable form
412 because other Perl programmers will expect it, and it works better if
413 there are more than 9 backreferences.
415 =item Binary number > 0b11111111111111111111111111111111 non-portable
417 (W portable) The binary number you specified is larger than 2**32-1
418 (4294967295) and therefore non-portable between systems. See
419 L<perlport> for more on portability concerns.
421 =item bind() on closed socket %s
423 (W closed) You tried to do a bind on a closed socket. Did you forget to
424 check the return value of your socket() call? See L<perlfunc/bind>.
426 =item binmode() on closed filehandle %s
428 (W unopened) You tried binmode() on a filehandle that was never opened.
429 Check you control flow and number of arguments.
431 =item Bit vector size > 32 non-portable
433 (W portable) Using bit vector sizes larger than 32 is non-portable.
435 =item Bizarre copy of %s in %s
437 (P) Perl detected an attempt to copy an internal value that is not
440 =item Buffer overflow in prime_env_iter: %s
442 (W internal) A warning peculiar to VMS. While Perl was preparing to
443 iterate over %ENV, it encountered a logical name or symbol definition
444 which was too long, so it was truncated to the string shown.
446 =item Callback called exit
448 (F) A subroutine invoked from an external package via call_sv()
449 exited by calling exit.
451 =item %s() called too early to check prototype
453 (W prototype) You've called a function that has a prototype before the
454 parser saw a definition or declaration for it, and Perl could not check
455 that the call conforms to the prototype. You need to either add an
456 early prototype declaration for the subroutine in question, or move the
457 subroutine definition ahead of the call to get proper prototype
458 checking. Alternatively, if you are certain that you're calling the
459 function correctly, you may put an ampersand before the name to avoid
460 the warning. See L<perlsub>.
462 =item Cannot compress integer in pack
464 (F) An argument to pack("w",...) was too large to compress. The BER
465 compressed integer format can only be used with positive integers, and you
466 attempted to compress Infinity or a very large number (> 1e308).
467 See L<perlfunc/pack>.
469 =item Cannot compress negative numbers in pack
471 (F) An argument to pack("w",...) was negative. The BER compressed integer
472 format can only be used with positive integers. See L<perlfunc/pack>.
474 =item Can only compress unsigned integers in pack
476 (F) An argument to pack("w",...) was not an integer. The BER compressed
477 integer format can only be used with positive integers, and you attempted
478 to compress something else. See L<perlfunc/pack>.
480 =item Can't bless non-reference value
482 (F) Only hard references may be blessed. This is how Perl "enforces"
483 encapsulation of objects. See L<perlobj>.
485 =item Can't call method "%s" in empty package "%s"
487 (F) You called a method correctly, and it correctly indicated a package
488 functioning as a class, but that package doesn't have ANYTHING defined
489 in it, let alone methods. See L<perlobj>.
491 =item Can't call method "%s" on an undefined value
493 (F) You used the syntax of a method call, but the slot filled by the
494 object reference or package name contains an undefined value. Something
495 like this will reproduce the error:
498 process $BADREF 1,2,3;
499 $BADREF->process(1,2,3);
501 =item Can't call method "%s" on unblessed reference
503 (F) A method call must know in what package it's supposed to run. It
504 ordinarily finds this out from the object reference you supply, but you
505 didn't supply an object reference in this case. A reference isn't an
506 object reference until it has been blessed. See L<perlobj>.
508 =item Can't call method "%s" without a package or object reference
510 (F) You used the syntax of a method call, but the slot filled by the
511 object reference or package name contains an expression that returns a
512 defined value which is neither an object reference nor a package name.
513 Something like this will reproduce the error:
516 process $BADREF 1,2,3;
517 $BADREF->process(1,2,3);
519 =item Can't chdir to %s
521 (F) You called C<perl -x/foo/bar>, but C</foo/bar> is not a directory
522 that you can chdir to, possibly because it doesn't exist.
524 =item Can't check filesystem of script "%s" for nosuid
526 (P) For some reason you can't check the filesystem of the script for
529 =item Can't coerce array into hash
531 (F) You used an array where a hash was expected, but the array has no
532 information on how to map from keys to array indices. You can do that
533 only with arrays that have a hash reference at index 0.
535 =item Can't coerce %s to integer in %s
537 (F) Certain types of SVs, in particular real symbol table entries
538 (typeglobs), can't be forced to stop being what they are. So you can't
548 but then $foo no longer contains a glob.
550 =item Can't coerce %s to number in %s
552 (F) Certain types of SVs, in particular real symbol table entries
553 (typeglobs), can't be forced to stop being what they are.
555 =item Can't coerce %s to string in %s
557 (F) Certain types of SVs, in particular real symbol table entries
558 (typeglobs), can't be forced to stop being what they are.
560 =item Can't create pipe mailbox
562 (P) An error peculiar to VMS. The process is suffering from exhausted
563 quotas or other plumbing problems.
565 =item Can't declare class for non-scalar %s in "%s"
567 (F) Currently, only scalar variables can be declared with a specific
568 class qualifier in a "my" or "our" declaration. The semantics may be
569 extended for other types of variables in future.
571 =item Can't declare %s in "%s"
573 (F) Only scalar, array, and hash variables may be declared as "my" or
574 "our" variables. They must have ordinary identifiers as names.
576 =item Can't do inplace edit: %s is not a regular file
578 (S inplace) You tried to use the B<-i> switch on a special file, such as
579 a file in /dev, or a FIFO. The file was ignored.
581 =item Can't do inplace edit on %s: %s
583 (S inplace) The creation of the new file failed for the indicated
586 =item Can't do inplace edit without backup
588 (F) You're on a system such as MS-DOS that gets confused if you try
589 reading from a deleted (but still opened) file. You have to say
590 C<-i.bak>, or some such.
592 =item Can't do inplace edit: %s would not be unique
594 (S inplace) Your filesystem does not support filenames longer than 14
595 characters and Perl was unable to create a unique filename during
596 inplace editing with the B<-i> switch. The file was ignored.
598 =item Can't do {n,m} with n > m in regex; marked by <-- HERE in m/%s/
600 (F) Minima must be less than or equal to maxima. If you really want your
601 regexp to match something 0 times, just put {0}. The <-- HERE shows in the
602 regular expression about where the problem was discovered. See L<perlre>.
604 =item Can't do setegid!
606 (P) The setegid() call failed for some reason in the setuid emulator of
609 =item Can't do seteuid!
611 (P) The setuid emulator of suidperl failed for some reason.
613 =item Can't do setuid
615 (F) This typically means that ordinary perl tried to exec suidperl to do
616 setuid emulation, but couldn't exec it. It looks for a name of the form
617 sperl5.000 in the same directory that the perl executable resides under
618 the name perl5.000, typically /usr/local/bin on Unix machines. If the
619 file is there, check the execute permissions. If it isn't, ask your
620 sysadmin why he and/or she removed it.
622 =item Can't do waitpid with flags
624 (F) This machine doesn't have either waitpid() or wait4(), so only
625 waitpid() without flags is emulated.
627 =item Can't emulate -%s on #! line
629 (F) The #! line specifies a switch that doesn't make sense at this
630 point. For example, it'd be kind of silly to put a B<-x> on the #!
633 =item Can't %s %s-endian %ss on this platform
635 (F) Your platform's byte-order is neither big-endian nor little-endian,
636 or it has a very strange pointer size. Packing and unpacking big- or
637 little-endian floating point values and pointers may not be possible.
638 See L<perlfunc/pack>.
640 =item Can't exec "%s": %s
642 (W exec) A system(), exec(), or piped open call could not execute the
643 named program for the indicated reason. Typical reasons include: the
644 permissions were wrong on the file, the file wasn't found in
645 C<$ENV{PATH}>, the executable in question was compiled for another
646 architecture, or the #! line in a script points to an interpreter that
647 can't be run for similar reasons. (Or maybe your system doesn't support
652 (F) Perl was trying to execute the indicated program for you because
653 that's what the #! line said. If that's not what you wanted, you may
654 need to mention "perl" on the #! line somewhere.
656 =item Can't execute %s
658 (F) You used the B<-S> switch, but the copies of the script to execute
659 found in the PATH did not have correct permissions.
661 =item Can't find an opnumber for "%s"
663 (F) A string of a form C<CORE::word> was given to prototype(), but there
664 is no builtin with the name C<word>.
666 =item Can't find %s character property "%s"
668 (F) You used C<\p{}> or C<\P{}> but the character property by that name
669 could not be found. Maybe you misspelled the name of the property
670 (remember that the names of character properties consist only of
671 alphanumeric characters), or maybe you forgot the C<Is> or C<In> prefix?
673 =item Can't find label %s
675 (F) You said to goto a label that isn't mentioned anywhere that it's
676 possible for us to go to. See L<perlfunc/goto>.
678 =item Can't find %s on PATH
680 (F) You used the B<-S> switch, but the script to execute could not be
683 =item Can't find %s on PATH, '.' not in PATH
685 (F) You used the B<-S> switch, but the script to execute could not be
686 found in the PATH, or at least not with the correct permissions. The
687 script exists in the current directory, but PATH prohibits running it.
689 =item Can't find %s property definition %s
691 (F) You may have tried to use C<\p> which means a Unicode property (for
692 example C<\p{Lu}> is all uppercase letters). If you did mean to use a
693 Unicode property, see L<perlunicode> for the list of known properties.
694 If you didn't mean to use a Unicode property, escape the C<\p>, either
695 by C<\\p> (just the C<\p>) or by C<\Q\p> (the rest of the string, until
698 =item Can't find string terminator %s anywhere before EOF
700 (F) Perl strings can stretch over multiple lines. This message means
701 that the closing delimiter was omitted. Because bracketed quotes count
702 nesting levels, the following is missing its final parenthesis:
704 print q(The character '(' starts a side comment.);
706 If you're getting this error from a here-document, you may have included
707 unseen whitespace before or after your closing tag. A good programmer's
708 editor will have a way to help you find these characters.
712 (F) A fatal error occurred while trying to fork while opening a
715 =item Can't get filespec - stale stat buffer?
717 (S) A warning peculiar to VMS. This arises because of the difference
718 between access checks under VMS and under the Unix model Perl assumes.
719 Under VMS, access checks are done by filename, rather than by bits in
720 the stat buffer, so that ACLs and other protections can be taken into
721 account. Unfortunately, Perl assumes that the stat buffer contains all
722 the necessary information, and passes it, instead of the filespec, to
723 the access checking routine. It will try to retrieve the filespec using
724 the device name and FID present in the stat buffer, but this works only
725 if you haven't made a subsequent call to the CRTL stat() routine,
726 because the device name is overwritten with each call. If this warning
727 appears, the name lookup failed, and the access checking routine gave up
728 and returned FALSE, just to be conservative. (Note: The access checking
729 routine knows about the Perl C<stat> operator and file tests, so you
730 shouldn't ever see this warning in response to a Perl command; it arises
731 only if some internal code takes stat buffers lightly.)
733 =item Can't get pipe mailbox device name
735 (P) An error peculiar to VMS. After creating a mailbox to act as a
736 pipe, Perl can't retrieve its name for later use.
738 =item Can't get SYSGEN parameter value for MAXBUF
740 (P) An error peculiar to VMS. Perl asked $GETSYI how big you want your
741 mailbox buffers to be, and didn't get an answer.
743 =item Can't "goto" into the middle of a foreach loop
745 (F) A "goto" statement was executed to jump into the middle of a foreach
746 loop. You can't get there from here. See L<perlfunc/goto>.
748 =item Can't "goto" out of a pseudo block
750 (F) A "goto" statement was executed to jump out of what might look like
751 a block, except that it isn't a proper block. This usually occurs if
752 you tried to jump out of a sort() block or subroutine, which is a no-no.
753 See L<perlfunc/goto>.
755 =item Can't goto subroutine from an eval-string
757 (F) The "goto subroutine" call can't be used to jump out of an eval
758 "string". (You can use it to jump out of an eval {BLOCK}, but you
759 probably don't want to.)
761 =item Can't goto subroutine outside a subroutine
763 (F) The deeply magical "goto subroutine" call can only replace one
764 subroutine call for another. It can't manufacture one out of whole
765 cloth. In general you should be calling it out of only an AUTOLOAD
766 routine anyway. See L<perlfunc/goto>.
768 =item Can't ignore signal CHLD, forcing to default
770 (W signal) Perl has detected that it is being run with the SIGCHLD
771 signal (sometimes known as SIGCLD) disabled. Since disabling this
772 signal will interfere with proper determination of exit status of child
773 processes, Perl has reset the signal to its default value. This
774 situation typically indicates that the parent program under which Perl
775 may be running (e.g. cron) is being very careless.
777 =item Can't "last" outside a loop block
779 (F) A "last" statement was executed to break out of the current block,
780 except that there's this itty bitty problem called there isn't a current
781 block. Note that an "if" or "else" block doesn't count as a "loopish"
782 block, as doesn't a block given to sort(), map() or grep(). You can
783 usually double the curlies to get the same effect though, because the
784 inner curlies will be considered a block that loops once. See
787 =item Can't load '%s' for module %s
789 (F) The module you tried to load failed to load a dynamic extension. This
790 may either mean that you upgraded your version of perl to one that is
791 incompatible with your old dynamic extensions (which is known to happen
792 between major versions of perl), or (more likely) that your dynamic
793 extension was built against an older version of the library that is
794 installed on your system. You may need to rebuild your old dynamic
797 =item Can't localize lexical variable %s
799 (F) You used local on a variable name that was previously declared as a
800 lexical variable using "my". This is not allowed. If you want to
801 localize a package variable of the same name, qualify it with the
804 =item Can't localize through a reference
806 (F) You said something like C<local $$ref>, which Perl can't currently
807 handle, because when it goes to restore the old value of whatever $ref
808 pointed to after the scope of the local() is finished, it can't be sure
809 that $ref will still be a reference.
811 =item Can't locate %s
813 (F) You said to C<do> (or C<require>, or C<use>) a file that couldn't be
814 found. Perl looks for the file in all the locations mentioned in @INC,
815 unless the file name included the full path to the file. Perhaps you
816 need to set the PERL5LIB or PERL5OPT environment variable to say where
817 the extra library is, or maybe the script needs to add the library name
818 to @INC. Or maybe you just misspelled the name of the file. See
819 L<perlfunc/require> and L<lib>.
821 =item Can't locate auto/%s.al in @INC
823 (F) A function (or method) was called in a package which allows
824 autoload, but there is no function to autoload. Most probable causes
825 are a misprint in a function/method name or a failure to C<AutoSplit>
826 the file, say, by doing C<make install>.
828 =item Can't locate loadable object for module %s in @INC
830 (F) The module you loaded is trying to load an external library, like
831 for example, C<foo.so> or C<bar.dll>, but the L<DynaLoader> module was
832 unable to locate this library. See L<DynaLoader>.
834 =item Can't locate object method "%s" via package "%s"
836 (F) You called a method correctly, and it correctly indicated a package
837 functioning as a class, but that package doesn't define that particular
838 method, nor does any of its base classes. See L<perlobj>.
840 =item Can't locate package %s for @%s::ISA
842 (W syntax) The @ISA array contained the name of another package that
843 doesn't seem to exist.
845 =item Can't locate PerlIO%s
847 (F) You tried to use in open() a PerlIO layer that does not exist,
848 e.g. open(FH, ">:nosuchlayer", "somefile").
850 =item Can't make list assignment to \%ENV on this system
852 (F) List assignment to %ENV is not supported on some systems, notably
855 =item Can't modify %s in %s
857 (F) You aren't allowed to assign to the item indicated, or otherwise try
858 to change it, such as with an auto-increment.
860 =item Can't modify nonexistent substring
862 (P) The internal routine that does assignment to a substr() was handed
865 =item Can't modify non-lvalue subroutine call
867 (F) Subroutines meant to be used in lvalue context should be declared as
868 such, see L<perlsub/"Lvalue subroutines">.
870 =item Can't msgrcv to read-only var
872 (F) The target of a msgrcv must be modifiable to be used as a receive
875 =item Can't "next" outside a loop block
877 (F) A "next" statement was executed to reiterate the current block, but
878 there isn't a current block. Note that an "if" or "else" block doesn't
879 count as a "loopish" block, as doesn't a block given to sort(), map() or
880 grep(). You can usually double the curlies to get the same effect
881 though, because the inner curlies will be considered a block that loops
882 once. See L<perlfunc/next>.
884 =item Can't open %s: %s
886 (S inplace) The implicit opening of a file through use of the C<< <> >>
887 filehandle, either implicitly under the C<-n> or C<-p> command-line
888 switches, or explicitly, failed for the indicated reason. Usually this
889 is because you don't have read permission for a file which you named on
892 =item Can't open a reference
894 (W io) You tried to open a scalar reference for reading or writing,
895 using the 3-arg open() syntax :
899 but your version of perl is compiled without perlio, and this form of
900 open is not supported.
902 =item Can't open bidirectional pipe
904 (W pipe) You tried to say C<open(CMD, "|cmd|")>, which is not supported.
905 You can try any of several modules in the Perl library to do this, such
906 as IPC::Open2. Alternately, direct the pipe's output to a file using
907 ">", and then read it in under a different file handle.
909 =item Can't open error file %s as stderr
911 (F) An error peculiar to VMS. Perl does its own command line
912 redirection, and couldn't open the file specified after '2>' or '2>>' on
913 the command line for writing.
915 =item Can't open input file %s as stdin
917 (F) An error peculiar to VMS. Perl does its own command line
918 redirection, and couldn't open the file specified after '<' on the
919 command line for reading.
921 =item Can't open output file %s as stdout
923 (F) An error peculiar to VMS. Perl does its own command line
924 redirection, and couldn't open the file specified after '>' or '>>' on
925 the command line for writing.
927 =item Can't open output pipe (name: %s)
929 (P) An error peculiar to VMS. Perl does its own command line
930 redirection, and couldn't open the pipe into which to send data destined
933 =item Can't open perl script%s
935 (F) The script you specified can't be opened for the indicated reason.
937 If you're debugging a script that uses #!, and normally relies on the
938 shell's $PATH search, the -S option causes perl to do that search, so
939 you don't have to type the path or C<`which $scriptname`>.
941 =item Can't read CRTL environ
943 (S) A warning peculiar to VMS. Perl tried to read an element of %ENV
944 from the CRTL's internal environment array and discovered the array was
945 missing. You need to figure out where your CRTL misplaced its environ
946 or define F<PERL_ENV_TABLES> (see L<perlvms>) so that environ is not
949 =item Can't redefine active sort subroutine %s
951 (F) Perl optimizes the internal handling of sort subroutines and keeps
952 pointers into them. You tried to redefine one such sort subroutine when
953 it was currently active, which is not allowed. If you really want to do
954 this, you should write C<sort { &func } @x> instead of C<sort func @x>.
956 =item Can't "redo" outside a loop block
958 (F) A "redo" statement was executed to restart the current block, but
959 there isn't a current block. Note that an "if" or "else" block doesn't
960 count as a "loopish" block, as doesn't a block given to sort(), map()
961 or grep(). You can usually double the curlies to get the same effect
962 though, because the inner curlies will be considered a block that
963 loops once. See L<perlfunc/redo>.
965 =item Can't remove %s: %s, skipping file
967 (S inplace) You requested an inplace edit without creating a backup
968 file. Perl was unable to remove the original file to replace it with
969 the modified file. The file was left unmodified.
971 =item Can't rename %s to %s: %s, skipping file
973 (S inplace) The rename done by the B<-i> switch failed for some reason,
974 probably because you don't have write permission to the directory.
976 =item Can't reopen input pipe (name: %s) in binary mode
978 (P) An error peculiar to VMS. Perl thought stdin was a pipe, and tried
979 to reopen it to accept binary data. Alas, it failed.
981 =item Can't resolve method `%s' overloading `%s' in package `%s'
983 (F|P) Error resolving overloading specified by a method name (as opposed
984 to a subroutine reference): no such method callable via the package. If
985 method name is C<???>, this is an internal error.
987 =item Can't reswap uid and euid
989 (P) The setreuid() call failed for some reason in the setuid emulator of
992 =item Can't return %s from lvalue subroutine
994 (F) Perl detected an attempt to return illegal lvalues (such as
995 temporary or readonly values) from a subroutine used as an lvalue. This
998 =item Can't return outside a subroutine
1000 (F) The return statement was executed in mainline code, that is, where
1001 there was no subroutine call to return out of. See L<perlsub>.
1003 =item Can't return %s to lvalue scalar context
1005 (F) You tried to return a complete array or hash from an lvalue subroutine,
1006 but you called the subroutine in a way that made Perl think you meant
1007 to return only one value. You probably meant to write parentheses around
1008 the call to the subroutine, which tell Perl that the call should be in
1011 =item Can't stat script "%s"
1013 (P) For some reason you can't fstat() the script even though you have it
1014 open already. Bizarre.
1016 =item Can't swap uid and euid
1018 (P) The setreuid() call failed for some reason in the setuid emulator of
1021 =item Can't take log of %g
1023 (F) For ordinary real numbers, you can't take the logarithm of a
1024 negative number or zero. There's a Math::Complex package that comes
1025 standard with Perl, though, if you really want to do that for the
1028 =item Can't take sqrt of %g
1030 (F) For ordinary real numbers, you can't take the square root of a
1031 negative number. There's a Math::Complex package that comes standard
1032 with Perl, though, if you really want to do that.
1034 =item Can't undef active subroutine
1036 (F) You can't undefine a routine that's currently running. You can,
1037 however, redefine it while it's running, and you can even undef the
1038 redefined subroutine while the old routine is running. Go figure.
1042 (F) You tried to unshift an "unreal" array that can't be unshifted, such
1043 as the main Perl stack.
1045 =item Can't upgrade that kind of scalar
1047 (P) The internal sv_upgrade routine adds "members" to an SV, making it
1048 into a more specialized kind of SV. The top several SV types are so
1049 specialized, however, that they cannot be interconverted. This message
1050 indicates that such a conversion was attempted.
1052 =item Can't upgrade to undef
1054 (P) The undefined SV is the bottom of the totem pole, in the scheme of
1055 upgradability. Upgrading to undef indicates an error in the code
1058 =item Can't use anonymous symbol table for method lookup
1060 (F) The internal routine that does method lookup was handed a symbol
1061 table that doesn't have a name. Symbol tables can become anonymous
1062 for example by undefining stashes: C<undef %Some::Package::>.
1064 =item Can't use an undefined value as %s reference
1066 (F) A value used as either a hard reference or a symbolic reference must
1067 be a defined value. This helps to delurk some insidious errors.
1069 =item Can't use bareword ("%s") as %s ref while "strict refs" in use
1071 (F) Only hard references are allowed by "strict refs". Symbolic
1072 references are disallowed. See L<perlref>.
1074 =item Can't use %! because Errno.pm is not available
1076 (F) The first time the %! hash is used, perl automatically loads the
1077 Errno.pm module. The Errno module is expected to tie the %! hash to
1078 provide symbolic names for C<$!> errno values.
1080 =item Can't use both '<' and '>' after type '%c' in %s
1082 (F) A type cannot be forced to have both big-endian and little-endian
1083 byte-order at the same time, so this combination of modifiers is not
1084 allowed. See L<perlfunc/pack>.
1086 =item Can't use %s for loop variable
1088 (F) Only a simple scalar variable may be used as a loop variable on a
1091 =item Can't use global %s in "my"
1093 (F) You tried to declare a magical variable as a lexical variable. This
1094 is not allowed, because the magic can be tied to only one location
1095 (namely the global variable) and it would be incredibly confusing to
1096 have variables in your program that looked like magical variables but
1099 =item Can't use '%c' in a group with different byte-order in %s
1101 (F) You attempted to force a different byte-order on a type
1102 that is already inside a group with a byte-order modifier.
1103 For example you cannot force little-endianness on a type that
1104 is inside a big-endian group.
1106 =item Can't use "my %s" in sort comparison
1108 (F) The global variables $a and $b are reserved for sort comparisons.
1109 You mentioned $a or $b in the same line as the <=> or cmp operator,
1110 and the variable had earlier been declared as a lexical variable.
1111 Either qualify the sort variable with the package name, or rename the
1114 =item Can't use %s ref as %s ref
1116 (F) You've mixed up your reference types. You have to dereference a
1117 reference of the type needed. You can use the ref() function to
1118 test the type of the reference, if need be.
1120 =item Can't use string ("%s") as %s ref while "strict refs" in use
1122 (F) Only hard references are allowed by "strict refs". Symbolic
1123 references are disallowed. See L<perlref>.
1125 =item Can't use subscript on %s
1127 (F) The compiler tried to interpret a bracketed expression as a
1128 subscript. But to the left of the brackets was an expression that
1129 didn't look like an array reference, or anything else subscriptable.
1131 =item Can't use \%c to mean $%c in expression
1133 (W syntax) In an ordinary expression, backslash is a unary operator that
1134 creates a reference to its argument. The use of backslash to indicate a
1135 backreference to a matched substring is valid only as part of a regular
1136 expression pattern. Trying to do this in ordinary Perl code produces a
1137 value that prints out looking like SCALAR(0xdecaf). Use the $1 form
1140 =item Can't weaken a nonreference
1142 (F) You attempted to weaken something that was not a reference. Only
1143 references can be weakened.
1145 =item Can't x= to read-only value
1147 (F) You tried to repeat a constant value (often the undefined value)
1148 with an assignment operator, which implies modifying the value itself.
1149 Perhaps you need to copy the value to a temporary, and repeat that.
1151 =item Character in "C" format wrapped in pack
1157 where $x is either less than 0 or more than 255; the C<"C"> format is
1158 only for encoding native operating system characters (ASCII, EBCDIC,
1159 and so on) and not for Unicode characters, so Perl behaved as if you meant
1163 If you actually want to pack Unicode codepoints, use the C<"U"> format
1166 =item Character in "c" format wrapped in pack
1172 where $x is either less than -128 or more than 127; the C<"c"> format
1173 is only for encoding native operating system characters (ASCII, EBCDIC,
1174 and so on) and not for Unicode characters, so Perl behaved as if you meant
1176 pack("c", $x & 255);
1178 If you actually want to pack Unicode codepoints, use the C<"U"> format
1181 =item close() on unopened filehandle %s
1183 (W unopened) You tried to close a filehandle that was never opened.
1185 =item Code missing after '/'
1187 (F) You had a (sub-)template that ends with a '/'. There must be another
1188 template code following the slash. See L<perlfunc/pack>.
1190 =item %s: Command not found
1192 (A) You've accidentally run your script through B<csh> instead of Perl.
1193 Check the #! line, or manually feed your script into Perl yourself.
1195 =item Compilation failed in require
1197 (F) Perl could not compile a file specified in a C<require> statement.
1198 Perl uses this generic message when none of the errors that it
1199 encountered were severe enough to halt compilation immediately.
1201 =item Complex regular subexpression recursion limit (%d) exceeded
1203 (W regexp) The regular expression engine uses recursion in complex
1204 situations where back-tracking is required. Recursion depth is limited
1205 to 32766, or perhaps less in architectures where the stack cannot grow
1206 arbitrarily. ("Simple" and "medium" situations are handled without
1207 recursion and are not subject to a limit.) Try shortening the string
1208 under examination; looping in Perl code (e.g. with C<while>) rather than
1209 in the regular expression engine; or rewriting the regular expression so
1210 that it is simpler or backtracks less. (See L<perlfaq2> for information
1211 on I<Mastering Regular Expressions>.)
1213 =item cond_broadcast() called on unlocked variable
1215 (W threads) Within a thread-enabled program, you tried to call
1216 cond_broadcast() on a variable which wasn't locked. The cond_broadcast()
1217 function is used to wake up another thread that is waiting in a
1218 cond_wait(). To ensure that the signal isn't sent before the other thread
1219 has a chance to enter the wait, it is usual for the signaling thread to
1220 first wait for a lock on variable. This lock attempt will only succeed
1221 after the other thread has entered cond_wait() and thus relinquished the
1224 =item cond_signal() called on unlocked variable
1226 (W threads) Within a thread-enabled program, you tried to call
1227 cond_signal() on a variable which wasn't locked. The cond_signal()
1228 function is used to wake up another thread that is waiting in a
1229 cond_wait(). To ensure that the signal isn't sent before the other thread
1230 has a chance to enter the wait, it is usual for the signaling thread to
1231 first wait for a lock on variable. This lock attempt will only succeed
1232 after the other thread has entered cond_wait() and thus relinquished the
1235 =item connect() on closed socket %s
1237 (W closed) You tried to do a connect on a closed socket. Did you forget
1238 to check the return value of your socket() call? See
1239 L<perlfunc/connect>.
1241 =item Constant(%s)%s: %s
1243 (F) The parser found inconsistencies either while attempting to define
1244 an overloaded constant, or when trying to find the character name
1245 specified in the C<\N{...}> escape. Perhaps you forgot to load the
1246 corresponding C<overload> or C<charnames> pragma? See L<charnames> and
1249 =item Constant is not %s reference
1251 (F) A constant value (perhaps declared using the C<use constant> pragma)
1252 is being dereferenced, but it amounts to the wrong type of reference.
1253 The message indicates the type of reference that was expected. This
1254 usually indicates a syntax error in dereferencing the constant value.
1255 See L<perlsub/"Constant Functions"> and L<constant>.
1257 =item Constant subroutine %s redefined
1259 (S) You redefined a subroutine which had previously been
1260 eligible for inlining. See L<perlsub/"Constant Functions"> for
1261 commentary and workarounds.
1263 =item Constant subroutine %s undefined
1265 (W misc) You undefined a subroutine which had previously been eligible
1266 for inlining. See L<perlsub/"Constant Functions"> for commentary and
1269 =item Copy method did not return a reference
1271 (F) The method which overloads "=" is buggy. See
1272 L<overload/Copy Constructor>.
1274 =item CORE::%s is not a keyword
1276 (F) The CORE:: namespace is reserved for Perl keywords.
1278 =item corrupted regexp pointers
1280 (P) The regular expression engine got confused by what the regular
1281 expression compiler gave it.
1283 =item corrupted regexp program
1285 (P) The regular expression engine got passed a regexp program without a
1288 =item Corrupt malloc ptr 0x%lx at 0x%lx
1290 (P) The malloc package that comes with Perl had an internal failure.
1292 =item Count after length/code in unpack
1294 (F) You had an unpack template indicating a counted-length string, but
1295 you have also specified an explicit size for the string. See
1298 =item Deep recursion on subroutine "%s"
1300 (W recursion) This subroutine has called itself (directly or indirectly)
1301 100 times more than it has returned. This probably indicates an
1302 infinite recursion, unless you're writing strange benchmark programs, in
1303 which case it indicates something else.
1305 =item defined(@array) is deprecated
1307 (D deprecated) defined() is not usually useful on arrays because it
1308 checks for an undefined I<scalar> value. If you want to see if the
1309 array is empty, just use C<if (@array) { # not empty }> for example.
1311 =item defined(%hash) is deprecated
1313 (D deprecated) defined() is not usually useful on hashes because it
1314 checks for an undefined I<scalar> value. If you want to see if the hash
1315 is empty, just use C<if (%hash) { # not empty }> for example.
1317 =item %s defines neither package nor VERSION--version check failed
1319 (F) You said something like "use Module 42" but in the Module file
1320 there are neither package declarations nor a C<$VERSION>.
1322 =item Delimiter for here document is too long
1324 (F) In a here document construct like C<<<FOO>, the label C<FOO> is too
1325 long for Perl to handle. You have to be seriously twisted to write code
1326 that triggers this error.
1328 =item Deprecated use of my() in false conditional
1330 (D deprecated) You used a declaration similar to C<my $x if 0>.
1331 There has been a long-standing bug in Perl that causes a lexical variable
1332 not to be cleared at scope exit when its declaration includes a false
1333 conditional. Some people have exploited this bug to achieve a kind of
1334 static variable. Since we intend to fix this bug, we don't want people
1335 relying on this behavior. You can achieve a similar static effect by
1336 declaring the variable in a separate block outside the function, eg
1338 sub f { my $x if 0; return $x++ }
1342 { my $x; sub f { return $x++ } }
1344 =item DESTROY created new reference to dead object '%s'
1346 (F) A DESTROY() method created a new reference to the object which is
1347 just being DESTROYed. Perl is confused, and prefers to abort rather than
1348 to create a dangling reference.
1350 =item Did not produce a valid header
1354 =item %s did not return a true value
1356 (F) A required (or used) file must return a true value to indicate that
1357 it compiled correctly and ran its initialization code correctly. It's
1358 traditional to end such a file with a "1;", though any true value would
1359 do. See L<perlfunc/require>.
1361 =item (Did you mean &%s instead?)
1363 (W) You probably referred to an imported subroutine &FOO as $FOO or some
1366 =item (Did you mean "local" instead of "our"?)
1368 (W misc) Remember that "our" does not localize the declared global
1369 variable. You have declared it again in the same lexical scope, which
1372 =item (Did you mean $ or @ instead of %?)
1374 (W) You probably said %hash{$key} when you meant $hash{$key} or
1375 @hash{@keys}. On the other hand, maybe you just meant %hash and got
1380 (F) You passed die() an empty string (the equivalent of C<die "">) or
1381 you called it with no args and both C<$@> and C<$_> were empty.
1383 =item Document contains no data
1387 =item %s does not define %s::VERSION--version check failed
1389 (F) You said something like "use Module 42" but the Module did not
1390 define a C<$VERSION.>
1392 =item '/' does not take a repeat count
1394 (F) You cannot put a repeat count of any kind right after the '/' code.
1395 See L<perlfunc/pack>.
1397 =item Don't know how to handle magic of type '%s'
1399 (P) The internal handling of magical variables has been cursed.
1401 =item do_study: out of memory
1403 (P) This should have been caught by safemalloc() instead.
1405 =item (Do you need to predeclare %s?)
1407 (S syntax) This is an educated guess made in conjunction with the message
1408 "%s found where operator expected". It often means a subroutine or module
1409 name is being referenced that hasn't been declared yet. This may be
1410 because of ordering problems in your file, or because of a missing
1411 "sub", "package", "require", or "use" statement. If you're referencing
1412 something that isn't defined yet, you don't actually have to define the
1413 subroutine or package before the current location. You can use an empty
1414 "sub foo;" or "package FOO;" to enter a "forward" declaration.
1416 =item dump() better written as CORE::dump()
1418 (W misc) You used the obsolescent C<dump()> built-in function, without fully
1419 qualifying it as C<CORE::dump()>. Maybe it's a typo. See L<perlfunc/dump>.
1421 =item Duplicate free() ignored
1423 (S malloc) An internal routine called free() on something that had
1426 =item Duplicate modifier '%c' after '%c' in %s
1428 (W) You have applied the same modifier more than once after a type
1429 in a pack template. See L<perlfunc/pack>.
1431 =item elseif should be elsif
1433 (S syntax) There is no keyword "elseif" in Perl because Larry thinks it's
1434 ugly. Your code will be interpreted as an attempt to call a method named
1435 "elseif" for the class returned by the following block. This is
1436 unlikely to be what you want.
1440 (F) C<\p> and C<\P> are used to introduce a named Unicode property, as
1441 described in L<perlunicode> and L<perlre>. You used C<\p> or C<\P> in
1442 a regular expression without specifying the property name.
1444 =item entering effective %s failed
1446 (F) While under the C<use filetest> pragma, switching the real and
1447 effective uids or gids failed.
1449 =item %ENV is aliased to %s
1451 (F) You're running under taint mode, and the C<%ENV> variable has been
1452 aliased to another hash, so it doesn't reflect anymore the state of the
1453 program's environment. This is potentially insecure.
1455 =item Error converting file specification %s
1457 (F) An error peculiar to VMS. Because Perl may have to deal with file
1458 specifications in either VMS or Unix syntax, it converts them to a
1459 single form when it must operate on them directly. Either you've passed
1460 an invalid file specification to Perl, or you've found a case the
1461 conversion routines don't handle. Drat.
1463 =item %s: Eval-group in insecure regular expression
1465 (F) Perl detected tainted data when trying to compile a regular
1466 expression that contains the C<(?{ ... })> zero-width assertion, which
1467 is unsafe. See L<perlre/(?{ code })>, and L<perlsec>.
1469 =item %s: Eval-group not allowed at run time
1471 (F) Perl tried to compile a regular expression containing the
1472 C<(?{ ... })> zero-width assertion at run time, as it would when the
1473 pattern contains interpolated values. Since that is a security risk, it
1474 is not allowed. If you insist, you may still do this by explicitly
1475 building the pattern from an interpolated string at run time and using
1476 that in an eval(). See L<perlre/(?{ code })>.
1478 =item %s: Eval-group not allowed, use re 'eval'
1480 (F) A regular expression contained the C<(?{ ... })> zero-width
1481 assertion, but that construct is only allowed when the C<use re 'eval'>
1482 pragma is in effect. See L<perlre/(?{ code })>.
1484 =item Excessively long <> operator
1486 (F) The contents of a <> operator may not exceed the maximum size of a
1487 Perl identifier. If you're just trying to glob a long list of
1488 filenames, try using the glob() operator, or put the filenames into a
1489 variable and glob that.
1491 =item exec? I'm not *that* kind of operating system
1493 (F) The C<exec> function is not implemented in MacPerl. See L<perlport>.
1495 =item Execution of %s aborted due to compilation errors
1497 (F) The final summary message when a Perl compilation fails.
1499 =item Exiting eval via %s
1501 (W exiting) You are exiting an eval by unconventional means, such as a
1502 goto, or a loop control statement.
1504 =item Exiting format via %s
1506 (W exiting) You are exiting a format by unconventional means, such as a
1507 goto, or a loop control statement.
1509 =item Exiting pseudo-block via %s
1511 (W exiting) You are exiting a rather special block construct (like a
1512 sort block or subroutine) by unconventional means, such as a goto, or a
1513 loop control statement. See L<perlfunc/sort>.
1515 =item Exiting subroutine via %s
1517 (W exiting) You are exiting a subroutine by unconventional means, such
1518 as a goto, or a loop control statement.
1520 =item Exiting substitution via %s
1522 (W exiting) You are exiting a substitution by unconventional means, such
1523 as a return, a goto, or a loop control statement.
1525 =item Explicit blessing to '' (assuming package main)
1527 (W misc) You are blessing a reference to a zero length string. This has
1528 the effect of blessing the reference into the package main. This is
1529 usually not what you want. Consider providing a default target package,
1530 e.g. bless($ref, $p || 'MyPackage');
1532 =item %s: Expression syntax
1534 (A) You've accidentally run your script through B<csh> instead of Perl.
1535 Check the #! line, or manually feed your script into Perl yourself.
1537 =item %s failed--call queue aborted
1539 (F) An untrapped exception was raised while executing a CHECK, INIT, or
1540 END subroutine. Processing of the remainder of the queue of such
1541 routines has been prematurely ended.
1543 =item False [] range "%s" in regex; marked by <-- HERE in m/%s/
1545 (W regexp) A character class range must start and end at a literal
1546 character, not another character class like C<\d> or C<[:alpha:]>. The "-"
1547 in your false range is interpreted as a literal "-". Consider quoting the
1548 "-", "\-". The <-- HERE shows in the regular expression about where the
1549 problem was discovered. See L<perlre>.
1551 =item Fatal VMS error at %s, line %d
1553 (P) An error peculiar to VMS. Something untoward happened in a VMS
1554 system service or RTL routine; Perl's exit status should provide more
1555 details. The filename in "at %s" and the line number in "line %d" tell
1556 you which section of the Perl source code is distressed.
1558 =item fcntl is not implemented
1560 (F) Your machine apparently doesn't implement fcntl(). What is this, a
1561 PDP-11 or something?
1563 =item Filehandle %s opened only for input
1565 (W io) You tried to write on a read-only filehandle. If you intended
1566 it to be a read-write filehandle, you needed to open it with "+<" or
1567 "+>" or "+>>" instead of with "<" or nothing. If you intended only to
1568 write the file, use ">" or ">>". See L<perlfunc/open>.
1570 =item Filehandle %s opened only for output
1572 (W io) You tried to read from a filehandle opened only for writing, If
1573 you intended it to be a read/write filehandle, you needed to open it
1574 with "+<" or "+>" or "+>>" instead of with "<" or nothing. If you
1575 intended only to read from the file, use "<". See L<perlfunc/open>.
1576 Another possibility is that you attempted to open filedescriptor 0
1577 (also known as STDIN) for output (maybe you closed STDIN earlier?).
1579 =item Filehandle %s reopened as %s only for input
1581 (W io) You opened for reading a filehandle that got the same filehandle id
1582 as STDOUT or STDERR. This occured because you closed STDOUT or STDERR
1585 =item Filehandle STDIN reopened as %s only for output
1587 (W io) You opened for writing a filehandle that got the same filehandle id
1588 as STDIN. This occured because you closed STDIN previously.
1590 =item Final $ should be \$ or $name
1592 (F) You must now decide whether the final $ in a string was meant to be
1593 a literal dollar sign, or was meant to introduce a variable name that
1594 happens to be missing. So you have to put either the backslash or the
1597 =item flock() on closed filehandle %s
1599 (W closed) The filehandle you're attempting to flock() got itself closed
1600 some time before now. Check your control flow. flock() operates on
1601 filehandles. Are you attempting to call flock() on a dirhandle by the
1604 =item Format not terminated
1606 (F) A format must be terminated by a line with a solitary dot. Perl got
1607 to the end of your file without finding such a line.
1609 =item Format %s redefined
1611 (W redefine) You redefined a format. To suppress this warning, say
1614 no warnings 'redefine';
1615 eval "format NAME =...";
1618 =item Found = in conditional, should be ==
1628 (or something like that).
1630 =item %s found where operator expected
1632 (S syntax) The Perl lexer knows whether to expect a term or an operator.
1633 If it sees what it knows to be a term when it was expecting to see an
1634 operator, it gives you this warning. Usually it indicates that an
1635 operator or delimiter was omitted, such as a semicolon.
1637 =item gdbm store returned %d, errno %d, key "%s"
1639 (S) A warning from the GDBM_File extension that a store failed.
1641 =item gethostent not implemented
1643 (F) Your C library apparently doesn't implement gethostent(), probably
1644 because if it did, it'd feel morally obligated to return every hostname
1647 =item get%sname() on closed socket %s
1649 (W closed) You tried to get a socket or peer socket name on a closed
1650 socket. Did you forget to check the return value of your socket() call?
1652 =item getpwnam returned invalid UIC %#o for user "%s"
1654 (S) A warning peculiar to VMS. The call to C<sys$getuai> underlying the
1655 C<getpwnam> operator returned an invalid UIC.
1657 =item getsockopt() on closed socket %s
1659 (W closed) You tried to get a socket option on a closed socket. Did you
1660 forget to check the return value of your socket() call? See
1661 L<perlfunc/getsockopt>.
1663 =item Global symbol "%s" requires explicit package name
1665 (F) You've said "use strict vars", which indicates that all variables
1666 must either be lexically scoped (using "my"), declared beforehand using
1667 "our", or explicitly qualified to say which package the global variable
1670 =item glob failed (%s)
1672 (W glob) Something went wrong with the external program(s) used for
1673 C<glob> and C<< <*.c> >>. Usually, this means that you supplied a
1674 C<glob> pattern that caused the external program to fail and exit with a
1675 nonzero status. If the message indicates that the abnormal exit
1676 resulted in a coredump, this may also mean that your csh (C shell) is
1677 broken. If so, you should change all of the csh-related variables in
1678 config.sh: If you have tcsh, make the variables refer to it as if it
1679 were csh (e.g. C<full_csh='/usr/bin/tcsh'>); otherwise, make them all
1680 empty (except that C<d_csh> should be C<'undef'>) so that Perl will
1681 think csh is missing. In either case, after editing config.sh, run
1682 C<./Configure -S> and rebuild Perl.
1684 =item Glob not terminated
1686 (F) The lexer saw a left angle bracket in a place where it was expecting
1687 a term, so it's looking for the corresponding right angle bracket, and
1688 not finding it. Chances are you left some needed parentheses out
1689 earlier in the line, and you really meant a "less than".
1691 =item Got an error from DosAllocMem
1693 (P) An error peculiar to OS/2. Most probably you're using an obsolete
1694 version of Perl, and this should not happen anyway.
1696 =item goto must have label
1698 (F) Unlike with "next" or "last", you're not allowed to goto an
1699 unspecified destination. See L<perlfunc/goto>.
1701 =item ()-group starts with a count
1703 (F) A ()-group started with a count. A count is
1704 supposed to follow something: a template character or a ()-group.
1705 See L<perlfunc/pack>.
1707 =item %s had compilation errors
1709 (F) The final summary message when a C<perl -c> fails.
1711 =item Had to create %s unexpectedly
1713 (S internal) A routine asked for a symbol from a symbol table that ought
1714 to have existed already, but for some reason it didn't, and had to be
1715 created on an emergency basis to prevent a core dump.
1717 =item Hash %%s missing the % in argument %d of %s()
1719 (D deprecated) Really old Perl let you omit the % on hash names in some
1720 spots. This is now heavily deprecated.
1722 =item %s has too many errors
1724 (F) The parser has given up trying to parse the program after 10 errors.
1725 Further error messages would likely be uninformative.
1727 =item Hexadecimal number > 0xffffffff non-portable
1729 (W portable) The hexadecimal number you specified is larger than 2**32-1
1730 (4294967295) and therefore non-portable between systems. See
1731 L<perlport> for more on portability concerns.
1733 =item Identifier too long
1735 (F) Perl limits identifiers (names for variables, functions, etc.) to
1736 about 250 characters for simple names, and somewhat more for compound
1737 names (like C<$A::B>). You've exceeded Perl's limits. Future versions
1738 of Perl are likely to eliminate these arbitrary limitations.
1740 =item Illegal binary digit %s
1742 (F) You used a digit other than 0 or 1 in a binary number.
1744 =item Illegal binary digit %s ignored
1746 (W digit) You may have tried to use a digit other than 0 or 1 in a
1747 binary number. Interpretation of the binary number stopped before the
1750 =item Illegal character %s (carriage return)
1752 (F) Perl normally treats carriage returns in the program text as it
1753 would any other whitespace, which means you should never see this error
1754 when Perl was built using standard options. For some reason, your
1755 version of Perl appears to have been built without this support. Talk
1756 to your Perl administrator.
1758 =item Illegal character in prototype for %s : %s
1760 (W syntax) An illegal character was found in a prototype declaration. Legal
1761 characters in prototypes are $, @, %, *, ;, [, ], &, and \.
1763 =item Illegal declaration of anonymous subroutine
1765 (F) When using the C<sub> keyword to construct an anonymous subroutine,
1766 you must always specify a block of code. See L<perlsub>.
1768 =item Illegal declaration of subroutine %s
1770 (F) A subroutine was not declared correctly. See L<perlsub>.
1772 =item Illegal division by zero
1774 (F) You tried to divide a number by 0. Either something was wrong in
1775 your logic, or you need to put a conditional in to guard against
1778 =item Illegal hexadecimal digit %s ignored
1780 (W digit) You may have tried to use a character other than 0 - 9 or
1781 A - F, a - f in a hexadecimal number. Interpretation of the hexadecimal
1782 number stopped before the illegal character.
1784 =item Illegal modulus zero
1786 (F) You tried to divide a number by 0 to get the remainder. Most
1787 numbers don't take to this kindly.
1789 =item Illegal number of bits in vec
1791 (F) The number of bits in vec() (the third argument) must be a power of
1792 two from 1 to 32 (or 64, if your platform supports that).
1794 =item Illegal octal digit %s
1796 (F) You used an 8 or 9 in an octal number.
1798 =item Illegal octal digit %s ignored
1800 (W digit) You may have tried to use an 8 or 9 in an octal number.
1801 Interpretation of the octal number stopped before the 8 or 9.
1803 =item Illegal switch in PERL5OPT: %s
1805 (X) The PERL5OPT environment variable may only be used to set the
1806 following switches: B<-[DIMUdmtw]>.
1808 =item Ill-formed CRTL environ value "%s"
1810 (W internal) A warning peculiar to VMS. Perl tried to read the CRTL's
1811 internal environ array, and encountered an element without the C<=>
1812 delimiter used to separate keys from values. The element is ignored.
1814 =item Ill-formed message in prime_env_iter: |%s|
1816 (W internal) A warning peculiar to VMS. Perl tried to read a logical
1817 name or CLI symbol definition when preparing to iterate over %ENV, and
1818 didn't see the expected delimiter between key and value, so the line was
1821 =item Impossible to activate assertion call
1823 (W assertions) You're calling an assertion function in a block that is
1824 not under the control of the C<assertions> pragma.
1826 =item (in cleanup) %s
1828 (W misc) This prefix usually indicates that a DESTROY() method raised
1829 the indicated exception. Since destructors are usually called by the
1830 system at arbitrary points during execution, and often a vast number of
1831 times, the warning is issued only once for any number of failures that
1832 would otherwise result in the same message being repeated.
1834 Failure of user callbacks dispatched using the C<G_KEEPERR> flag could
1835 also result in this warning. See L<perlcall/G_KEEPERR>.
1837 =item In EBCDIC the v-string components cannot exceed 2147483647
1839 (F) An error peculiar to EBCDIC. Internally, v-strings are stored as
1840 Unicode code points, and encoded in EBCDIC as UTF-EBCDIC. The UTF-EBCDIC
1841 encoding is limited to code points no larger than 2147483647 (0x7FFFFFFF).
1843 =item Insecure dependency in %s
1845 (F) You tried to do something that the tainting mechanism didn't like.
1846 The tainting mechanism is turned on when you're running setuid or
1847 setgid, or when you specify B<-T> to turn it on explicitly. The
1848 tainting mechanism labels all data that's derived directly or indirectly
1849 from the user, who is considered to be unworthy of your trust. If any
1850 such data is used in a "dangerous" operation, you get this error. See
1851 L<perlsec> for more information.
1853 =item Insecure directory in %s
1855 (F) You can't use system(), exec(), or a piped open in a setuid or
1856 setgid script if C<$ENV{PATH}> contains a directory that is writable by
1857 the world. See L<perlsec>.
1859 =item Insecure $ENV{%s} while running %s
1861 (F) You can't use system(), exec(), or a piped open in a setuid or
1862 setgid script if any of C<$ENV{PATH}>, C<$ENV{IFS}>, C<$ENV{CDPATH}>,
1863 C<$ENV{ENV}>, C<$ENV{BASH_ENV}> or C<$ENV{TERM}> are derived from data
1864 supplied (or potentially supplied) by the user. The script must set
1865 the path to a known value, using trustworthy data. See L<perlsec>.
1867 =item Integer overflow in %s number
1869 (W overflow) The hexadecimal, octal or binary number you have specified
1870 either as a literal or as an argument to hex() or oct() is too big for
1871 your architecture, and has been converted to a floating point number.
1872 On a 32-bit architecture the largest hexadecimal, octal or binary number
1873 representable without overflow is 0xFFFFFFFF, 037777777777, or
1874 0b11111111111111111111111111111111 respectively. Note that Perl
1875 transparently promotes all numbers to a floating point representation
1876 internally--subject to loss of precision errors in subsequent
1879 =item Integer overflow in version
1881 (F) Some portion of a version initialization is too large for the
1882 size of integers for your architecture. This is not a warning
1883 because there is no rational reason for a version to try and use a
1884 element larger than typically 2**32. This is usually caused by
1885 trying to use some odd mathematical operation as a version, like
1888 =item Internal disaster in regex; marked by <-- HERE in m/%s/
1890 (P) Something went badly wrong in the regular expression parser.
1891 The <-- HERE shows in the regular expression about where the problem was
1894 =item Internal inconsistency in tracking vforks
1896 (S) A warning peculiar to VMS. Perl keeps track of the number of times
1897 you've called C<fork> and C<exec>, to determine whether the current call
1898 to C<exec> should affect the current script or a subprocess (see
1899 L<perlvms/"exec LIST">). Somehow, this count has become scrambled, so
1900 Perl is making a guess and treating this C<exec> as a request to
1901 terminate the Perl script and execute the specified command.
1903 =item Internal urp in regex; marked by <-- HERE in m/%s/
1905 (P) Something went badly awry in the regular expression parser. The
1906 <-- HERE shows in the regular expression about where the problem was
1909 =item %s (...) interpreted as function
1911 (W syntax) You've run afoul of the rule that says that any list operator
1912 followed by parentheses turns into a function, with all the list
1913 operators arguments found inside the parentheses. See
1914 L<perlop/Terms and List Operators (Leftward)>.
1916 =item Invalid %s attribute: %s
1918 The indicated attribute for a subroutine or variable was not recognized
1919 by Perl or by a user-supplied handler. See L<attributes>.
1921 =item Invalid %s attributes: %s
1923 The indicated attributes for a subroutine or variable were not
1924 recognized by Perl or by a user-supplied handler. See L<attributes>.
1926 =item Invalid conversion in %s: "%s"
1928 (W printf) Perl does not understand the given format conversion. See
1929 L<perlfunc/sprintf>.
1931 =item Invalid [] range "%s" in regex; marked by <-- HERE in m/%s/
1933 (F) The range specified in a character class had a minimum character
1934 greater than the maximum character. One possibility is that you forgot the
1935 C<{}> from your ending C<\x{}> - C<\x> without the curly braces can go only
1936 up to C<ff>. The <-- HERE shows in the regular expression about where the
1937 problem was discovered. See L<perlre>.
1939 =item Invalid range "%s" in transliteration operator
1941 (F) The range specified in the tr/// or y/// operator had a minimum
1942 character greater than the maximum character. See L<perlop>.
1944 =item Invalid separator character %s in attribute list
1946 (F) Something other than a colon or whitespace was seen between the
1947 elements of an attribute list. If the previous attribute had a
1948 parenthesised parameter list, perhaps that list was terminated too soon.
1951 =item Invalid separator character %s in PerlIO layer specification %s
1953 (W layer) When pushing layers onto the Perl I/O system, something other than a
1954 colon or whitespace was seen between the elements of a layer list.
1955 If the previous attribute had a parenthesised parameter list, perhaps that
1956 list was terminated too soon.
1958 =item Invalid type '%s' in %s
1960 (F) The given character is not a valid pack or unpack type.
1961 See L<perlfunc/pack>.
1962 (W) The given character is not a valid pack or unpack type but used to be
1965 =item Invalid version format (multiple underscores)
1967 (F) Versions may contain at most a single underscore, which signals
1968 that the version is a beta release. See L<version> for the allowed
1971 =item Invalid version format (underscores before decimal)
1973 (F) Versions may not contain decimals after the optional underscore.
1974 See L<version> for the allowed version formats.
1976 =item ioctl is not implemented
1978 (F) Your machine apparently doesn't implement ioctl(), which is pretty
1979 strange for a machine that supports C.
1981 =item ioctl() on unopened %s
1983 (W unopened) You tried ioctl() on a filehandle that was never opened.
1984 Check you control flow and number of arguments.
1986 =item IO layers (like "%s") unavailable
1988 (F) Your Perl has not been configured to have PerlIO, and therefore
1989 you cannot use IO layers. To have PerlIO Perl must be configured
1992 =item IO::Socket::atmark not implemented on this architecture
1994 (F) Your machine doesn't implement the sockatmark() functionality,
1995 neither as a system call or an ioctl call (SIOCATMARK).
1997 =item $* is no longer supported
1999 (D deprecated) The special variable C<$*>, deprecated in older perls, has
2000 been removed as of 5.9.0 and is no longer supported. You should use the
2001 C<//m> and C<//s> regexp modifiers instead.
2003 =item `%s' is not a code reference
2005 (W overload) The second (fourth, sixth, ...) argument of overload::constant
2006 needs to be a code reference. Either an anonymous subroutine, or a reference
2009 =item `%s' is not an overloadable type
2011 (W overload) You tried to overload a constant type the overload package is
2014 =item junk on end of regexp
2016 (P) The regular expression parser is confused.
2018 =item Label not found for "last %s"
2020 (F) You named a loop to break out of, but you're not currently in a loop
2021 of that name, not even if you count where you were called from. See
2024 =item Label not found for "next %s"
2026 (F) You named a loop to continue, but you're not currently in a loop of
2027 that name, not even if you count where you were called from. See
2030 =item Label not found for "redo %s"
2032 (F) You named a loop to restart, but you're not currently in a loop of
2033 that name, not even if you count where you were called from. See
2036 =item leaving effective %s failed
2038 (F) While under the C<use filetest> pragma, switching the real and
2039 effective uids or gids failed.
2041 =item length/code after end of string in unpack
2043 (F) While unpacking, the string buffer was alread used up when an unpack
2044 length/code combination tried to obtain more data. This results in
2045 an undefined value for the length. See L<perlfunc/pack>.
2047 =item listen() on closed socket %s
2049 (W closed) You tried to do a listen on a closed socket. Did you forget
2050 to check the return value of your socket() call? See
2053 =item Lookbehind longer than %d not implemented in regex; marked by <-- HERE in m/%s/
2055 (F) There is currently a limit on the length of string which lookbehind can
2056 handle. This restriction may be eased in a future release. The <-- HERE
2057 shows in the regular expression about where the problem was discovered.
2059 =item lstat() on filehandle %s
2061 (W io) You tried to do an lstat on a filehandle. What did you mean
2062 by that? lstat() makes sense only on filenames. (Perl did a fstat()
2063 instead on the filehandle.)
2065 =item Lvalue subs returning %s not implemented yet
2067 (F) Due to limitations in the current implementation, array and hash
2068 values cannot be returned in subroutines used in lvalue context. See
2069 L<perlsub/"Lvalue subroutines">.
2071 =item Malformed integer in [] in pack
2073 (F) Between the brackets enclosing a numeric repeat count only digits
2074 are permitted. See L<perlfunc/pack>.
2076 =item Malformed integer in [] in unpack
2078 (F) Between the brackets enclosing a numeric repeat count only digits
2079 are permitted. See L<perlfunc/pack>.
2081 =item Malformed PERLLIB_PREFIX
2083 (F) An error peculiar to OS/2. PERLLIB_PREFIX should be of the form
2090 with nonempty prefix1 and prefix2. If C<prefix1> is indeed a prefix of
2091 a builtin library search path, prefix2 is substituted. The error may
2092 appear if components are not found, or are too long. See
2093 "PERLLIB_PREFIX" in L<perlos2>.
2095 =item Malformed prototype for %s: %s
2097 (F) You tried to use a function with a malformed prototype. The
2098 syntax of function prototypes is given a brief compile-time check for
2099 obvious errors like invalid characters. A more rigorous check is run
2100 when the function is called.
2102 =item Malformed UTF-8 character (%s)
2104 Perl detected something that didn't comply with UTF-8 encoding rules.
2106 One possible cause is that you read in data that you thought to be in
2107 UTF-8 but it wasn't (it was for example legacy 8-bit data). Another
2108 possibility is careless use of utf8::upgrade().
2110 =item Malformed UTF-16 surrogate
2112 Perl thought it was reading UTF-16 encoded character data but while
2113 doing it Perl met a malformed Unicode surrogate.
2115 =item %s matches null string many times in regex; marked by <-- HERE in m/%s/
2117 (W regexp) The pattern you've specified would be an infinite loop if the
2118 regular expression engine didn't specifically check for that. The <-- HERE
2119 shows in the regular expression about where the problem was discovered.
2122 =item "%s" may clash with future reserved word
2124 (W) This warning may be due to running a perl5 script through a perl4
2125 interpreter, especially if the word that is being warned about is
2128 =item % may not be used in pack
2130 (F) You can't pack a string by supplying a checksum, because the
2131 checksumming process loses information, and you can't go the other way.
2132 See L<perlfunc/unpack>.
2134 =item Method for operation %s not found in package %s during blessing
2136 (F) An attempt was made to specify an entry in an overloading table that
2137 doesn't resolve to a valid subroutine. See L<overload>.
2139 =item Method %s not permitted
2143 =item Might be a runaway multi-line %s string starting on line %d
2145 (S) An advisory indicating that the previous error may have been caused
2146 by a missing delimiter on a string or pattern, because it eventually
2147 ended earlier on the current line.
2149 =item Misplaced _ in number
2151 (W syntax) An underscore (underbar) in a numeric constant did not
2152 separate two digits.
2154 =item Missing %sbrace%s on \N{}
2156 (F) Wrong syntax of character name literal C<\N{charname}> within
2157 double-quotish context.
2159 =item Missing comma after first argument to %s function
2161 (F) While certain functions allow you to specify a filehandle or an
2162 "indirect object" before the argument list, this ain't one of them.
2164 =item Missing command in piped open
2166 (W pipe) You used the C<open(FH, "| command")> or
2167 C<open(FH, "command |")> construction, but the command was missing or
2170 =item Missing control char name in \c
2172 (F) A double-quoted string ended with "\c", without the required control
2175 =item Missing name in "my sub"
2177 (F) The reserved syntax for lexically scoped subroutines requires that
2178 they have a name with which they can be found.
2180 =item Missing $ on loop variable
2182 (F) Apparently you've been programming in B<csh> too much. Variables
2183 are always mentioned with the $ in Perl, unlike in the shells, where it
2184 can vary from one line to the next.
2186 =item (Missing operator before %s?)
2188 (S syntax) This is an educated guess made in conjunction with the message
2189 "%s found where operator expected". Often the missing operator is a comma.
2191 =item Missing right brace on %s
2193 (F) Missing right brace in C<\p{...}> or C<\P{...}>.
2195 =item Missing right curly or square bracket
2197 (F) The lexer counted more opening curly or square brackets than closing
2198 ones. As a general rule, you'll find it's missing near the place you
2201 =item (Missing semicolon on previous line?)
2203 (S syntax) This is an educated guess made in conjunction with the message
2204 "%s found where operator expected". Don't automatically put a semicolon on
2205 the previous line just because you saw this message.
2207 =item Modification of a read-only value attempted
2209 (F) You tried, directly or indirectly, to change the value of a
2210 constant. You didn't, of course, try "2 = 1", because the compiler
2211 catches that. But an easy way to do the same thing is:
2213 sub mod { $_[0] = 1 }
2216 Another way is to assign to a substr() that's off the end of the string.
2218 Yet another way is to assign to a C<foreach> loop I<VAR> when I<VAR>
2219 is aliased to a constant in the look I<LIST>:
2222 foreach my $n ($x, 2) {
2223 $n *= 2; # modifies the $x, but fails on attempt to modify the 2
2226 =item Modification of non-creatable array value attempted, %s
2228 (F) You tried to make an array value spring into existence, and the
2229 subscript was probably negative, even counting from end of the array
2232 =item Modification of non-creatable hash value attempted, %s
2234 (P) You tried to make a hash value spring into existence, and it
2235 couldn't be created for some peculiar reason.
2237 =item Module name must be constant
2239 (F) Only a bare module name is allowed as the first argument to a "use".
2241 =item Module name required with -%c option
2243 (F) The C<-M> or C<-m> options say that Perl should load some module, but
2244 you omitted the name of the module. Consult L<perlrun> for full details
2245 about C<-M> and C<-m>.
2247 =item More than one argument to open
2249 (F) The C<open> function has been asked to open multiple files. This
2250 can happen if you are trying to open a pipe to a command that takes a
2251 list of arguments, but have forgotten to specify a piped open mode.
2252 See L<perlfunc/open> for details.
2254 =item msg%s not implemented
2256 (F) You don't have System V message IPC on your system.
2258 =item Multidimensional syntax %s not supported
2260 (W syntax) Multidimensional arrays aren't written like C<$foo[1,2,3]>.
2261 They're written like C<$foo[1][2][3]>, as in C.
2263 =item '/' must be followed by 'a*', 'A*' or 'Z*'
2265 (F) You had a pack template indicating a counted-length string,
2266 Currently the only things that can have their length counted are a*, A*
2267 or Z*. See L<perlfunc/pack>.
2269 =item '/' must follow a numeric type in unpack
2271 (F) You had an unpack template that contained a '/', but this did not
2272 follow some unpack specification producing a numeric value.
2273 See L<perlfunc/pack>.
2275 =item "my sub" not yet implemented
2277 (F) Lexically scoped subroutines are not yet implemented. Don't try
2280 =item "my" variable %s can't be in a package
2282 (F) Lexically scoped variables aren't in a package, so it doesn't make
2283 sense to try to declare one with a package qualifier on the front. Use
2284 local() if you want to localize a package variable.
2286 =item Name "%s::%s" used only once: possible typo
2288 (W once) Typographical errors often show up as unique variable names.
2289 If you had a good reason for having a unique name, then just mention it
2290 again somehow to suppress the message. The C<our> declaration is
2291 provided for this purpose.
2293 NOTE: This warning detects symbols that have been used only once so $c, @c,
2294 %c, *c, &c, sub c{}, c(), and c (the filehandle or format) are considered
2295 the same; if a program uses $c only once but also uses any of the others it
2296 will not trigger this warning.
2298 =item Negative '/' count in unpack
2300 (F) The length count obtained from a length/code unpack operation was
2301 negative. See L<perlfunc/pack>.
2303 =item Negative length
2305 (F) You tried to do a read/write/send/recv operation with a buffer
2306 length that is less than 0. This is difficult to imagine.
2308 =item Negative offset to vec in lvalue context
2310 (F) When C<vec> is called in an lvalue context, the second argument must be
2311 greater than or equal to zero.
2313 =item Nested quantifiers in regex; marked by <-- HERE in m/%s/
2315 (F) You can't quantify a quantifier without intervening parentheses. So
2316 things like ** or +* or ?* are illegal. The <-- HERE shows in the regular
2317 expression about where the problem was discovered.
2319 Note that the minimal matching quantifiers, C<*?>, C<+?>, and
2320 C<??> appear to be nested quantifiers, but aren't. See L<perlre>.
2322 =item %s never introduced
2324 (S internal) The symbol in question was declared but somehow went out of
2325 scope before it could possibly have been used.
2327 =item No %s allowed while running setuid
2329 (F) Certain operations are deemed to be too insecure for a setuid or
2330 setgid script to even be allowed to attempt. Generally speaking there
2331 will be another way to do what you want that is, if not secure, at least
2332 securable. See L<perlsec>.
2334 =item No comma allowed after %s
2336 (F) A list operator that has a filehandle or "indirect object" is not
2337 allowed to have a comma between that and the following arguments.
2338 Otherwise it'd be just another one of the arguments.
2340 One possible cause for this is that you expected to have imported a
2341 constant to your name space with B<use> or B<import> while no such
2342 importing took place, it may for example be that your operating system
2343 does not support that particular constant. Hopefully you did use an
2344 explicit import list for the constants you expect to see, please see
2345 L<perlfunc/use> and L<perlfunc/import>. While an explicit import list
2346 would probably have caught this error earlier it naturally does not
2347 remedy the fact that your operating system still does not support that
2348 constant. Maybe you have a typo in the constants of the symbol import
2349 list of B<use> or B<import> or in the constant name at the line where
2350 this error was triggered?
2352 =item No command into which to pipe on command line
2354 (F) An error peculiar to VMS. Perl handles its own command line
2355 redirection, and found a '|' at the end of the command line, so it
2356 doesn't know where you want to pipe the output from this command.
2358 =item No DB::DB routine defined
2360 (F) The currently executing code was compiled with the B<-d> switch, but
2361 for some reason the perl5db.pl file (or some facsimile thereof) didn't
2362 define a routine to be called at the beginning of each statement. Which
2363 is odd, because the file should have been required automatically, and
2364 should have blown up the require if it didn't parse right.
2366 =item No dbm on this machine
2368 (P) This is counted as an internal error, because every machine should
2369 supply dbm nowadays, because Perl comes with SDBM. See L<SDBM_File>.
2371 =item No DBsub routine
2373 (F) The currently executing code was compiled with the B<-d> switch,
2374 but for some reason the perl5db.pl file (or some facsimile thereof)
2375 didn't define a DB::sub routine to be called at the beginning of each
2376 ordinary subroutine call.
2378 =item No B<-e> allowed in setuid scripts
2380 (F) A setuid script can't be specified by the user.
2382 =item No error file after 2> or 2>> on command line
2384 (F) An error peculiar to VMS. Perl handles its own command line
2385 redirection, and found a '2>' or a '2>>' on the command line, but can't
2386 find the name of the file to which to write data destined for stderr.
2388 =item No group ending character '%c' found in template
2390 (F) A pack or unpack template has an opening '(' or '[' without its
2391 matching counterpart. See L<perlfunc/pack>.
2393 =item No input file after < on command line
2395 (F) An error peculiar to VMS. Perl handles its own command line
2396 redirection, and found a '<' on the command line, but can't find the
2397 name of the file from which to read data for stdin.
2401 (F) The setuid emulator requires that scripts have a well-formed #! line
2402 even on machines that don't support the #! construct.
2404 =item "no" not allowed in expression
2406 (F) The "no" keyword is recognized and executed at compile time, and
2407 returns no useful value. See L<perlmod>.
2409 =item No output file after > on command line
2411 (F) An error peculiar to VMS. Perl handles its own command line
2412 redirection, and found a lone '>' at the end of the command line, so it
2413 doesn't know where you wanted to redirect stdout.
2415 =item No output file after > or >> on command line
2417 (F) An error peculiar to VMS. Perl handles its own command line
2418 redirection, and found a '>' or a '>>' on the command line, but can't
2419 find the name of the file to which to write data destined for stdout.
2421 =item No package name allowed for variable %s in "our"
2423 (F) Fully qualified variable names are not allowed in "our"
2424 declarations, because that doesn't make much sense under existing
2425 semantics. Such syntax is reserved for future extensions.
2427 =item No Perl script found in input
2429 (F) You called C<perl -x>, but no line was found in the file beginning
2430 with #! and containing the word "perl".
2432 =item No setregid available
2434 (F) Configure didn't find anything resembling the setregid() call for
2437 =item No setreuid available
2439 (F) Configure didn't find anything resembling the setreuid() call for
2442 =item No space allowed after -%c
2444 (F) The argument to the indicated command line switch must follow
2445 immediately after the switch, without intervening spaces.
2447 =item No %s specified for -%c
2449 (F) The indicated command line switch needs a mandatory argument, but
2450 you haven't specified one.
2452 =item No such class %s
2454 (F) You provided a class qualifier in a "my" or "our" declaration, but
2455 this class doesn't exist at this point in your program.
2457 =item No such pipe open
2459 (P) An error peculiar to VMS. The internal routine my_pclose() tried to
2460 close a pipe which hadn't been opened. This should have been caught
2461 earlier as an attempt to close an unopened filehandle.
2463 =item No such signal: SIG%s
2465 (W signal) You specified a signal name as a subscript to %SIG that was
2466 not recognized. Say C<kill -l> in your shell to see the valid signal
2467 names on your system.
2469 =item Not a CODE reference
2471 (F) Perl was trying to evaluate a reference to a code value (that is, a
2472 subroutine), but found a reference to something else instead. You can
2473 use the ref() function to find out what kind of ref it really was. See
2476 =item Not a format reference
2478 (F) I'm not sure how you managed to generate a reference to an anonymous
2479 format, but this indicates you did, and that it didn't exist.
2481 =item Not a GLOB reference
2483 (F) Perl was trying to evaluate a reference to a "typeglob" (that is, a
2484 symbol table entry that looks like C<*foo>), but found a reference to
2485 something else instead. You can use the ref() function to find out what
2486 kind of ref it really was. See L<perlref>.
2488 =item Not a HASH reference
2490 (F) Perl was trying to evaluate a reference to a hash value, but found a
2491 reference to something else instead. You can use the ref() function to
2492 find out what kind of ref it really was. See L<perlref>.
2494 =item Not an ARRAY reference
2496 (F) Perl was trying to evaluate a reference to an array value, but found
2497 a reference to something else instead. You can use the ref() function
2498 to find out what kind of ref it really was. See L<perlref>.
2500 =item Not a perl script
2502 (F) The setuid emulator requires that scripts have a well-formed #! line
2503 even on machines that don't support the #! construct. The line must
2506 =item Not a SCALAR reference
2508 (F) Perl was trying to evaluate a reference to a scalar value, but found
2509 a reference to something else instead. You can use the ref() function
2510 to find out what kind of ref it really was. See L<perlref>.
2512 =item Not a subroutine reference
2514 (F) Perl was trying to evaluate a reference to a code value (that is, a
2515 subroutine), but found a reference to something else instead. You can
2516 use the ref() function to find out what kind of ref it really was. See
2519 =item Not a subroutine reference in overload table
2521 (F) An attempt was made to specify an entry in an overloading table that
2522 doesn't somehow point to a valid subroutine. See L<overload>.
2524 =item Not enough arguments for %s
2526 (F) The function requires more arguments than you specified.
2528 =item Not enough format arguments
2530 (W syntax) A format specified more picture fields than the next line
2531 supplied. See L<perlform>.
2535 (A) You've accidentally run your script through the Bourne shell instead
2536 of Perl. Check the #! line, or manually feed your script into Perl
2539 =item no UTC offset information; assuming local time is UTC
2541 (S) A warning peculiar to VMS. Perl was unable to find the local
2542 timezone offset, so it's assuming that local system time is equivalent
2543 to UTC. If it's not, define the logical name
2544 F<SYS$TIMEZONE_DIFFERENTIAL> to translate to the number of seconds which
2545 need to be added to UTC to get local time.
2547 =item Null filename used
2549 (F) You can't require the null filename, especially because on many
2550 machines that means the current directory! See L<perlfunc/require>.
2552 =item NULL OP IN RUN
2554 (P debugging) Some internal routine called run() with a null opcode
2557 =item Null picture in formline
2559 (F) The first argument to formline must be a valid format picture
2560 specification. It was found to be empty, which probably means you
2561 supplied it an uninitialized value. See L<perlform>.
2565 (P) An attempt was made to realloc NULL.
2567 =item NULL regexp argument
2569 (P) The internal pattern matching routines blew it big time.
2571 =item NULL regexp parameter
2573 (P) The internal pattern matching routines are out of their gourd.
2575 =item Number too long
2577 (F) Perl limits the representation of decimal numbers in programs to
2578 about 250 characters. You've exceeded that length. Future
2579 versions of Perl are likely to eliminate this arbitrary limitation. In
2580 the meantime, try using scientific notation (e.g. "1e6" instead of
2583 =item Octal number in vector unsupported
2585 (F) Numbers with a leading C<0> are not currently allowed in vectors.
2586 The octal number interpretation of such numbers may be supported in a
2589 =item Octal number > 037777777777 non-portable
2591 (W portable) The octal number you specified is larger than 2**32-1
2592 (4294967295) and therefore non-portable between systems. See
2593 L<perlport> for more on portability concerns.
2595 See also L<perlport> for writing portable code.
2597 =item Odd number of arguments for overload::constant
2599 (W overload) The call to overload::constant contained an odd number of
2600 arguments. The arguments should come in pairs.
2602 =item Odd number of elements in anonymous hash
2604 (W misc) You specified an odd number of elements to initialize a hash,
2605 which is odd, because hashes come in key/value pairs.
2607 =item Odd number of elements in hash assignment
2609 (W misc) You specified an odd number of elements to initialize a hash,
2610 which is odd, because hashes come in key/value pairs.
2612 =item Offset outside string
2614 (F) You tried to do a read/write/send/recv operation with an offset
2615 pointing outside the buffer. This is difficult to imagine. The sole
2616 exception to this is that C<sysread()>ing past the buffer will extend
2617 the buffer and zero pad the new area.
2619 =item %s() on unopened %s
2621 (W unopened) An I/O operation was attempted on a filehandle that was
2622 never initialized. You need to do an open(), a sysopen(), or a socket()
2623 call, or call a constructor from the FileHandle package.
2625 =item -%s on unopened filehandle %s
2627 (W unopened) You tried to invoke a file test operator on a filehandle
2628 that isn't open. Check your control flow. See also L<perlfunc/-X>.
2632 (S internal) An internal warning that the grammar is screwed up.
2636 (S internal) An internal warning that the grammar is screwed up.
2638 =item Operation `%s': no method found, %s
2640 (F) An attempt was made to perform an overloaded operation for which no
2641 handler was defined. While some handlers can be autogenerated in terms
2642 of other handlers, there is no default handler for any operation, unless
2643 C<fallback> overloading key is specified to be true. See L<overload>.
2645 =item Operator or semicolon missing before %s
2647 (S ambiguous) You used a variable or subroutine call where the parser
2648 was expecting an operator. The parser has assumed you really meant to
2649 use an operator, but this is highly likely to be incorrect. For
2650 example, if you say "*foo *foo" it will be interpreted as if you said
2653 =item "our" variable %s redeclared
2655 (W misc) You seem to have already declared the same global once before
2656 in the current lexical scope.
2658 =item Out of memory!
2660 (X) The malloc() function returned 0, indicating there was insufficient
2661 remaining memory (or virtual memory) to satisfy the request. Perl has
2662 no option but to exit immediately.
2664 At least in Unix you may be able to get past this by increasing your
2665 process datasize limits: in csh/tcsh use C<limit> and
2666 C<limit datasize n> (where C<n> is the number of kilobytes) to check
2667 the current limits and change them, and in ksh/bash/zsh use C<ulimit -a>
2668 and C<ulimit -d n>, respectively.
2670 =item Out of memory during %s extend
2672 (X) An attempt was made to extend an array, a list, or a string beyond
2673 the largest possible memory allocation.
2675 =item Out of memory during "large" request for %s
2677 (F) The malloc() function returned 0, indicating there was insufficient
2678 remaining memory (or virtual memory) to satisfy the request. However,
2679 the request was judged large enough (compile-time default is 64K), so a
2680 possibility to shut down by trapping this error is granted.
2682 =item Out of memory during request for %s
2684 (X|F) The malloc() function returned 0, indicating there was
2685 insufficient remaining memory (or virtual memory) to satisfy the
2688 The request was judged to be small, so the possibility to trap it
2689 depends on the way perl was compiled. By default it is not trappable.
2690 However, if compiled for this, Perl may use the contents of C<$^M> as an
2691 emergency pool after die()ing with this message. In this case the error
2692 is trappable I<once>, and the error message will include the line and file
2693 where the failed request happened.
2695 =item Out of memory during ridiculously large request
2697 (F) You can't allocate more than 2^31+"small amount" bytes. This error
2698 is most likely to be caused by a typo in the Perl program. e.g.,
2699 C<$arr[time]> instead of C<$arr[$time]>.
2701 =item Out of memory for yacc stack
2703 (F) The yacc parser wanted to grow its stack so it could continue
2704 parsing, but realloc() wouldn't give it more memory, virtual or
2707 =item '@' outside of string in unpack
2709 (F) You had a template that specified an absolute position outside
2710 the string being unpacked. See L<perlfunc/pack>.
2712 =item %s package attribute may clash with future reserved word: %s
2714 (W reserved) A lowercase attribute name was used that had a
2715 package-specific handler. That name might have a meaning to Perl itself
2716 some day, even though it doesn't yet. Perhaps you should use a
2717 mixed-case attribute name, instead. See L<attributes>.
2719 =item pack/unpack repeat count overflow
2721 (F) You can't specify a repeat count so large that it overflows your
2722 signed integers. See L<perlfunc/pack>.
2726 (W io) A single call to write() produced more lines than can fit on a
2727 page. See L<perlform>.
2731 (P) An internal error.
2733 =item panic: ck_grep
2735 (P) Failed an internal consistency check trying to compile a grep.
2737 =item panic: ck_split
2739 (P) Failed an internal consistency check trying to compile a split.
2741 =item panic: corrupt saved stack index
2743 (P) The savestack was requested to restore more localized values than
2744 there are in the savestack.
2746 =item panic: del_backref
2748 (P) Failed an internal consistency check while trying to reset a weak
2751 =item panic: Devel::DProf inconsistent subroutine return
2753 (P) Devel::DProf called a subroutine that exited using goto(LABEL),
2754 last(LABEL) or next(LABEL). Leaving that way a subroutine called from
2755 an XSUB will lead very probably to a crash of the interpreter. This is
2756 a bug that will hopefully one day get fixed.
2760 (P) We popped the context stack to an eval context, and then discovered
2761 it wasn't an eval context.
2763 =item panic: do_subst
2765 (P) The internal pp_subst() routine was called with invalid operational
2768 =item panic: do_trans_%s
2770 (P) The internal do_trans routines were called with invalid operational
2775 (P) The library function frexp() failed, making printf("%f") impossible.
2779 (P) We popped the context stack to a context with the specified label,
2780 and then discovered it wasn't a context we know how to do a goto in.
2782 =item panic: INTERPCASEMOD
2784 (P) The lexer got into a bad state at a case modifier.
2786 =item panic: INTERPCONCAT
2788 (P) The lexer got into a bad state parsing a string with brackets.
2790 =item panic: kid popen errno read
2792 (F) forked child returned an incomprehensible message about its errno.
2796 (P) We popped the context stack to a block context, and then discovered
2797 it wasn't a block context.
2799 =item panic: leave_scope clearsv
2801 (P) A writable lexical variable became read-only somehow within the
2804 =item panic: leave_scope inconsistency
2806 (P) The savestack probably got out of sync. At least, there was an
2807 invalid enum on the top of it.
2809 =item panic: magic_killbackrefs
2811 (P) Failed an internal consistency check while trying to reset all weak
2812 references to an object.
2816 (P) Something requested a negative number of bytes of malloc.
2818 =item panic: mapstart
2820 (P) The compiler is screwed up with respect to the map() function.
2822 =item panic: memory wrap
2824 (P) Something tried to allocate more memory than possible.
2826 =item panic: null array
2828 (P) One of the internal array routines was passed a null AV pointer.
2830 =item panic: pad_alloc
2832 (P) The compiler got confused about which scratch pad it was allocating
2833 and freeing temporaries and lexicals from.
2835 =item panic: pad_free curpad
2837 (P) The compiler got confused about which scratch pad it was allocating
2838 and freeing temporaries and lexicals from.
2840 =item panic: pad_free po
2842 (P) An invalid scratch pad offset was detected internally.
2844 =item panic: pad_reset curpad
2846 (P) The compiler got confused about which scratch pad it was allocating
2847 and freeing temporaries and lexicals from.
2849 =item panic: pad_sv po
2851 (P) An invalid scratch pad offset was detected internally.
2853 =item panic: pad_swipe curpad
2855 (P) The compiler got confused about which scratch pad it was allocating
2856 and freeing temporaries and lexicals from.
2858 =item panic: pad_swipe po
2860 (P) An invalid scratch pad offset was detected internally.
2862 =item panic: pp_iter
2864 (P) The foreach iterator got called in a non-loop context frame.
2866 =item panic: pp_match%s
2868 (P) The internal pp_match() routine was called with invalid operational
2871 =item panic: pp_split
2873 (P) Something terrible went wrong in setting up for the split.
2875 =item panic: realloc
2877 (P) Something requested a negative number of bytes of realloc.
2879 =item panic: restartop
2881 (P) Some internal routine requested a goto (or something like it), and
2882 didn't supply the destination.
2886 (P) We popped the context stack to a subroutine or eval context, and
2887 then discovered it wasn't a subroutine or eval context.
2889 =item panic: scan_num
2891 (P) scan_num() got called on something that wasn't a number.
2893 =item panic: sv_insert
2895 (P) The sv_insert() routine was told to remove more string than there
2898 =item panic: top_env
2900 (P) The compiler attempted to do a goto, or something weird like that.
2902 =item panic: utf16_to_utf8: odd bytelen
2904 (P) Something tried to call utf16_to_utf8 with an odd (as opposed
2905 to even) byte length.
2909 (P) The lexer got into a bad state while processing a case modifier.
2911 =item Parentheses missing around "%s" list
2913 (W parenthesis) You said something like
2919 my ($foo, $bar) = @_;
2921 Remember that "my", "our", and "local" bind tighter than comma.
2923 =item C<-p> destination: %s
2925 (F) An error occurred during the implicit output invoked by the C<-p>
2926 command-line switch. (This output goes to STDOUT unless you've
2927 redirected it with select().)
2929 =item (perhaps you forgot to load "%s"?)
2931 (F) This is an educated guess made in conjunction with the message
2932 "Can't locate object method \"%s\" via package \"%s\"". It often means
2933 that a method requires a package that has not been loaded.
2935 =item Perl_my_%s() not available
2937 (F) Your platform has very uncommon byte-order and integer size,
2938 so it was not possible to set up some or all fixed-width byte-order
2939 conversion functions. This is only a problem when you're using the
2940 '<' or '>' modifiers in (un)pack templates. See L<perlfunc/pack>.
2942 =item Perl %s required--this is only version %s, stopped
2944 (F) The module in question uses features of a version of Perl more
2945 recent than the currently running version. How long has it been since
2946 you upgraded, anyway? See L<perlfunc/require>.
2948 =item PERL_SH_DIR too long
2950 (F) An error peculiar to OS/2. PERL_SH_DIR is the directory to find the
2951 C<sh>-shell in. See "PERL_SH_DIR" in L<perlos2>.
2953 =item PERL_SIGNALS illegal: "%s"
2955 See L<perlrun/PERL_SIGNALS> for legal values.
2957 =item perl: warning: Setting locale failed.
2959 (S) The whole warning message will look something like:
2961 perl: warning: Setting locale failed.
2962 perl: warning: Please check that your locale settings:
2965 are supported and installed on your system.
2966 perl: warning: Falling back to the standard locale ("C").
2968 Exactly what were the failed locale settings varies. In the above the
2969 settings were that the LC_ALL was "En_US" and the LANG had no value.
2970 This error means that Perl detected that you and/or your operating
2971 system supplier and/or system administrator have set up the so-called
2972 locale system but Perl could not use those settings. This was not
2973 dead serious, fortunately: there is a "default locale" called "C" that
2974 Perl can and will use, the script will be run. Before you really fix
2975 the problem, however, you will get the same error message each time
2976 you run Perl. How to really fix the problem can be found in
2977 L<perllocale> section B<LOCALE PROBLEMS>.
2979 =item Permission denied
2981 (F) The setuid emulator in suidperl decided you were up to no good.
2983 =item pid %x not a child
2985 (W exec) A warning peculiar to VMS. Waitpid() was asked to wait for a
2986 process which isn't a subprocess of the current process. While this is
2987 fine from VMS' perspective, it's probably not what you intended.
2989 =item 'P' must have an explicit size in unpack
2991 (F) The unpack format P must have an explicit size, not "*".
2993 =item B<-P> not allowed for setuid/setgid script
2995 (F) The script would have to be opened by the C preprocessor by name,
2996 which provides a race condition that breaks security.
2998 =item POSIX class [:%s:] unknown in regex; marked by <-- HERE in m/%s/
3000 (F) The class in the character class [: :] syntax is unknown. The <-- HERE
3001 shows in the regular expression about where the problem was discovered.
3002 Note that the POSIX character classes do B<not> have the C<is> prefix
3003 the corresponding C interfaces have: in other words, it's C<[[:print:]]>,
3004 not C<isprint>. See L<perlre>.
3006 =item POSIX getpgrp can't take an argument
3008 (F) Your system has POSIX getpgrp(), which takes no argument, unlike
3009 the BSD version, which takes a pid.
3011 =item POSIX syntax [%s] belongs inside character classes in regex; marked by <-- HERE in m/%s/
3013 (W regexp) The character class constructs [: :], [= =], and [. .] go
3014 I<inside> character classes, the [] are part of the construct, for example:
3015 /[012[:alpha:]345]/. Note that [= =] and [. .] are not currently
3016 implemented; they are simply placeholders for future extensions and will
3017 cause fatal errors. The <-- HERE shows in the regular expression about
3018 where the problem was discovered. See L<perlre>.
3020 =item POSIX syntax [. .] is reserved for future extensions in regex; marked by <-- HERE in m/%s/
3022 (F regexp) Within regular expression character classes ([]) the syntax
3023 beginning with "[." and ending with ".]" is reserved for future extensions.
3024 If you need to represent those character sequences inside a regular
3025 expression character class, just quote the square brackets with the
3026 backslash: "\[." and ".\]". The <-- HERE shows in the regular expression
3027 about where the problem was discovered. See L<perlre>.
3029 =item POSIX syntax [= =] is reserved for future extensions in regex; marked by <-- HERE in m/%s/
3031 (F) Within regular expression character classes ([]) the syntax beginning
3032 with "[=" and ending with "=]" is reserved for future extensions. If you
3033 need to represent those character sequences inside a regular expression
3034 character class, just quote the square brackets with the backslash: "\[="
3035 and "=\]". The <-- HERE shows in the regular expression about where the
3036 problem was discovered. See L<perlre>.
3038 =item Possible attempt to put comments in qw() list
3040 (W qw) qw() lists contain items separated by whitespace; as with literal
3041 strings, comment characters are not ignored, but are instead treated as
3042 literal data. (You may have used different delimiters than the
3043 parentheses shown here; braces are also frequently used.)
3045 You probably wrote something like this:
3052 when you should have written this:
3059 If you really want comments, build your list the
3060 old-fashioned way, with quotes and commas:
3064 'b', # another comment
3067 =item Possible attempt to separate words with commas
3069 (W qw) qw() lists contain items separated by whitespace; therefore
3070 commas aren't needed to separate the items. (You may have used
3071 different delimiters than the parentheses shown here; braces are also
3074 You probably wrote something like this:
3078 which puts literal commas into some of the list items. Write it without
3079 commas if you don't want them to appear in your data:
3083 =item Possible memory corruption: %s overflowed 3rd argument
3085 (F) An ioctl() or fcntl() returned more than Perl was bargaining for.
3086 Perl guesses a reasonable buffer size, but puts a sentinel byte at the
3087 end of the buffer just in case. This sentinel byte got clobbered, and
3088 Perl assumes that memory is now corrupted. See L<perlfunc/ioctl>.
3090 =item Possible precedence problem on bitwise %c operator
3092 (W precedence) Your program uses a bitwise logical operator in conjunction
3093 with a numeric comparison operator, like this :
3095 if ($x & $y == 0) { ... }
3097 This expression is actually equivalent to C<$x & ($y == 0)>, due to the
3098 higher precedence of C<==>. This is probably not what you want. (If you
3099 really meant to write this, disable the warning, or, better, put the
3100 parentheses explicitly and write C<$x & ($y == 0)>).
3102 =item Possible unintended interpolation of %s in string
3104 (W ambiguous) You said something like `@foo' in a double-quoted string
3105 but there was no array C<@foo> in scope at the time. If you wanted a
3106 literal @foo, then write it as \@foo; otherwise find out what happened
3107 to the array you apparently lost track of.
3109 =item Possible Y2K bug: %s
3111 (W y2k) You are concatenating the number 19 with another number, which
3112 could be a potential Year 2000 problem.
3114 =item pragma "attrs" is deprecated, use "sub NAME : ATTRS" instead
3116 (D deprecated) You have written something like this:
3120 use attrs qw(locked);
3123 You should use the new declaration syntax instead.
3129 The C<use attrs> pragma is now obsolete, and is only provided for
3130 backward-compatibility. See L<perlsub/"Subroutine Attributes">.
3132 =item Precedence problem: open %s should be open(%s)
3134 (S precedence) The old irregular construct
3138 is now misinterpreted as
3142 because of the strict regularization of Perl 5's grammar into unary and
3143 list operators. (The old open was a little of both.) You must put
3144 parentheses around the filehandle, or use the new "or" operator instead
3147 =item Premature end of script headers
3151 =item printf() on closed filehandle %s
3153 (W closed) The filehandle you're writing to got itself closed sometime
3154 before now. Check your control flow.
3156 =item print() on closed filehandle %s
3158 (W closed) The filehandle you're printing on got itself closed sometime
3159 before now. Check your control flow.
3161 =item Process terminated by SIG%s
3163 (W) This is a standard message issued by OS/2 applications, while *nix
3164 applications die in silence. It is considered a feature of the OS/2
3165 port. One can easily disable this by appropriate sighandlers, see
3166 L<perlipc/"Signals">. See also "Process terminated by SIGTERM/SIGINT"
3169 =item Prototype mismatch: %s vs %s
3171 (S prototype) The subroutine being declared or defined had previously been
3172 declared or defined with a different function prototype.
3174 =item Prototype not terminated
3176 (F) You've omitted the closing parenthesis in a function prototype
3179 =item Quantifier follows nothing in regex; marked by <-- HERE in m/%s/
3181 (F) You started a regular expression with a quantifier. Backslash it if you
3182 meant it literally. The <-- HERE shows in the regular expression about
3183 where the problem was discovered. See L<perlre>.
3185 =item Quantifier in {,} bigger than %d in regex; marked by <-- HERE in m/%s/
3187 (F) There is currently a limit to the size of the min and max values of the
3188 {min,max} construct. The <-- HERE shows in the regular expression about where
3189 the problem was discovered. See L<perlre>.
3191 =item Quantifier unexpected on zero-length expression; marked by <-- HERE in m/%s/
3193 (W regexp) You applied a regular expression quantifier in a place where
3194 it makes no sense, such as on a zero-width assertion. Try putting the
3195 quantifier inside the assertion instead. For example, the way to match
3196 "abc" provided that it is followed by three repetitions of "xyz" is
3197 C</abc(?=(?:xyz){3})/>, not C</abc(?=xyz){3}/>.
3199 The <-- HERE shows in the regular expression about where the problem was
3202 =item Range iterator outside integer range
3204 (F) One (or both) of the numeric arguments to the range operator ".."
3205 are outside the range which can be represented by integers internally.
3206 One possible workaround is to force Perl to use magical string increment
3207 by prepending "0" to your numbers.
3209 =item readline() on closed filehandle %s
3211 (W closed) The filehandle you're reading from got itself closed sometime
3212 before now. Check your control flow.
3214 =item read() on closed filehandle %s
3216 (W closed) You tried to read from a closed filehandle.
3218 =item read() on unopened filehandle %s
3220 (W unopened) You tried to read from a filehandle that was never opened.
3222 =item Reallocation too large: %lx
3224 (F) You can't allocate more than 64K on an MS-DOS machine.
3226 =item realloc() of freed memory ignored
3228 (S malloc) An internal routine called realloc() on something that had
3231 =item Recompile perl with B<-D>DEBUGGING to use B<-D> switch
3233 (F debugging) You can't use the B<-D> option unless the code to produce
3234 the desired output is compiled into Perl, which entails some overhead,
3235 which is why it's currently left out of your copy.
3237 =item Recursive inheritance detected in package '%s'
3239 (F) More than 100 levels of inheritance were used. Probably indicates
3240 an unintended loop in your inheritance hierarchy.
3242 =item Recursive inheritance detected while looking for method %s
3244 (F) More than 100 levels of inheritance were encountered while invoking
3245 a method. Probably indicates an unintended loop in your inheritance
3248 =item Reference found where even-sized list expected
3250 (W misc) You gave a single reference where Perl was expecting a list
3251 with an even number of elements (for assignment to a hash). This usually
3252 means that you used the anon hash constructor when you meant to use
3253 parens. In any case, a hash requires key/value B<pairs>.
3255 %hash = { one => 1, two => 2, }; # WRONG
3256 %hash = [ qw/ an anon array / ]; # WRONG
3257 %hash = ( one => 1, two => 2, ); # right
3258 %hash = qw( one 1 two 2 ); # also fine
3260 =item Reference is already weak
3262 (W misc) You have attempted to weaken a reference that is already weak.
3263 Doing so has no effect.
3265 =item Reference miscount in sv_replace()
3267 (W internal) The internal sv_replace() function was handed a new SV with
3268 a reference count of other than 1.
3270 =item Reference to nonexistent group in regex; marked by <-- HERE in m/%s/
3272 (F) You used something like C<\7> in your regular expression, but there are
3273 not at least seven sets of capturing parentheses in the expression. If you
3274 wanted to have the character with value 7 inserted into the regular expression,
3275 prepend a zero to make the number at least two digits: C<\07>
3277 The <-- HERE shows in the regular expression about where the problem was
3280 =item regexp memory corruption
3282 (P) The regular expression engine got confused by what the regular
3283 expression compiler gave it.
3285 =item Regexp out of space
3287 (P) A "can't happen" error, because safemalloc() should have caught it
3290 =item Repeated format line will never terminate (~~ and @# incompatible)
3292 (F) Your format containes the ~~ repeat-until-blank sequence and a
3293 numeric field that will never go blank so that the repetition never
3294 terminates. You might use ^# instead. See L<perlform>.
3296 =item Reversed %s= operator
3298 (W syntax) You wrote your assignment operator backwards. The = must
3299 always comes last, to avoid ambiguity with subsequent unary operators.
3301 =item Runaway format
3303 (F) Your format contained the ~~ repeat-until-blank sequence, but it
3304 produced 200 lines at once, and the 200th line looked exactly like the
3305 199th line. Apparently you didn't arrange for the arguments to exhaust
3306 themselves, either by using ^ instead of @ (for scalar variables), or by
3307 shifting or popping (for array variables). See L<perlform>.
3309 =item Scalars leaked: %d
3311 (P) Something went wrong in Perl's internal bookkeeping of scalars:
3312 not all scalar variables were deallocated by the time Perl exited.
3313 What this usually indicates is a memory leak, which is of course bad,
3314 especially if the Perl program is intended to be long-running.
3316 =item Scalar value @%s[%s] better written as $%s[%s]
3318 (W syntax) You've used an array slice (indicated by @) to select a
3319 single element of an array. Generally it's better to ask for a scalar
3320 value (indicated by $). The difference is that C<$foo[&bar]> always
3321 behaves like a scalar, both when assigning to it and when evaluating its
3322 argument, while C<@foo[&bar]> behaves like a list when you assign to it,
3323 and provides a list context to its subscript, which can do weird things
3324 if you're expecting only one subscript.
3326 On the other hand, if you were actually hoping to treat the array
3327 element as a list, you need to look into how references work, because
3328 Perl will not magically convert between scalars and lists for you. See
3331 =item Scalar value @%s{%s} better written as $%s{%s}
3333 (W syntax) You've used a hash slice (indicated by @) to select a single
3334 element of a hash. Generally it's better to ask for a scalar value
3335 (indicated by $). The difference is that C<$foo{&bar}> always behaves
3336 like a scalar, both when assigning to it and when evaluating its
3337 argument, while C<@foo{&bar}> behaves like a list when you assign to it,
3338 and provides a list context to its subscript, which can do weird things
3339 if you're expecting only one subscript.
3341 On the other hand, if you were actually hoping to treat the hash element
3342 as a list, you need to look into how references work, because Perl will
3343 not magically convert between scalars and lists for you. See
3346 =item Script is not setuid/setgid in suidperl
3348 (F) Oddly, the suidperl program was invoked on a script without a setuid
3349 or setgid bit set. This doesn't make much sense.
3351 =item Search pattern not terminated
3353 (F) The lexer couldn't find the final delimiter of a // or m{}
3354 construct. Remember that bracketing delimiters count nesting level.
3355 Missing the leading C<$> from a variable C<$m> may cause this error.
3357 Note that since Perl 5.9.0 a // can also be the I<defined-or>
3358 construct, not just the empty search pattern. Therefore code written
3359 in Perl 5.9.0 or later that uses the // as the I<defined-or> can be
3360 misparsed by pre-5.9.0 Perls as a non-terminated search pattern.
3362 =item %sseek() on unopened filehandle
3364 (W unopened) You tried to use the seek() or sysseek() function on a
3365 filehandle that was either never opened or has since been closed.
3367 =item select not implemented
3369 (F) This machine doesn't implement the select() system call.
3371 =item Self-ties of arrays and hashes are not supported
3373 (F) Self-ties are of arrays and hashes are not supported in
3374 the current implementation.
3376 =item Semicolon seems to be missing
3378 (W semicolon) A nearby syntax error was probably caused by a missing
3379 semicolon, or possibly some other missing operator, such as a comma.
3381 =item semi-panic: attempt to dup freed string
3383 (S internal) The internal newSVsv() routine was called to duplicate a
3384 scalar that had previously been marked as free.
3386 =item sem%s not implemented
3388 (F) You don't have System V semaphore IPC on your system.
3390 =item send() on closed socket %s
3392 (W closed) The socket you're sending to got itself closed sometime
3393 before now. Check your control flow.
3395 =item Sequence (? incomplete in regex; marked by <-- HERE in m/%s/
3397 (F) A regular expression ended with an incomplete extension (?. The <-- HERE
3398 shows in the regular expression about where the problem was discovered. See
3401 =item Sequence (?%s...) not implemented in regex; marked by <-- HERE in m/%s/
3403 (F) A proposed regular expression extension has the character reserved but
3404 has not yet been written. The <-- HERE shows in the regular expression about
3405 where the problem was discovered. See L<perlre>.
3407 =item Sequence (?%s...) not recognized in regex; marked by <-- HERE in m/%s/
3409 (F) You used a regular expression extension that doesn't make sense. The
3410 <-- HERE shows in the regular expression about where the problem was
3411 discovered. See L<perlre>.
3413 =item Sequence (?#... not terminated in regex; marked by <-- HERE in m/%s/
3415 (F) A regular expression comment must be terminated by a closing
3416 parenthesis. Embedded parentheses aren't allowed. The <-- HERE shows in
3417 the regular expression about where the problem was discovered. See
3420 =item Sequence (?{...}) not terminated or not {}-balanced in regex; marked by <-- HERE in m/%s/
3422 (F) If the contents of a (?{...}) clause contains braces, they must balance
3423 for Perl to properly detect the end of the clause. The <-- HERE shows in
3424 the regular expression about where the problem was discovered. See
3427 =item 500 Server error
3433 This is the error message generally seen in a browser window when trying
3434 to run a CGI program (including SSI) over the web. The actual error text
3435 varies widely from server to server. The most frequently-seen variants
3436 are "500 Server error", "Method (something) not permitted", "Document
3437 contains no data", "Premature end of script headers", and "Did not
3438 produce a valid header".
3440 B<This is a CGI error, not a Perl error>.
3442 You need to make sure your script is executable, is accessible by the
3443 user CGI is running the script under (which is probably not the user
3444 account you tested it under), does not rely on any environment variables
3445 (like PATH) from the user it isn't running under, and isn't in a
3446 location where the CGI server can't find it, basically, more or less.
3447 Please see the following for more information:
3449 http://www.perl.org/CGI_MetaFAQ.html
3450 http://www.htmlhelp.org/faq/cgifaq.html
3451 http://www.w3.org/Security/Faq/
3453 You should also look at L<perlfaq9>.
3455 =item setegid() not implemented
3457 (F) You tried to assign to C<$)>, and your operating system doesn't
3458 support the setegid() system call (or equivalent), or at least Configure
3461 =item seteuid() not implemented
3463 (F) You tried to assign to C<< $> >>, and your operating system doesn't
3464 support the seteuid() system call (or equivalent), or at least Configure
3467 =item setpgrp can't take arguments
3469 (F) Your system has the setpgrp() from BSD 4.2, which takes no
3470 arguments, unlike POSIX setpgid(), which takes a process ID and process
3473 =item setrgid() not implemented
3475 (F) You tried to assign to C<$(>, and your operating system doesn't
3476 support the setrgid() system call (or equivalent), or at least Configure
3479 =item setruid() not implemented
3481 (F) You tried to assign to C<$<>, and your operating system doesn't
3482 support the setruid() system call (or equivalent), or at least Configure
3485 =item setsockopt() on closed socket %s
3487 (W closed) You tried to set a socket option on a closed socket. Did you
3488 forget to check the return value of your socket() call? See
3489 L<perlfunc/setsockopt>.
3491 =item Setuid/gid script is writable by world
3493 (F) The setuid emulator won't run a script that is writable by the
3494 world, because the world might have written on it already.
3496 =item shm%s not implemented
3498 (F) You don't have System V shared memory IPC on your system.
3500 =item !=~ should be !~
3502 (W syntax) The non-matching operator is !~, not !=~. !=~ will be
3503 interpreted as the != (numeric not equal) and ~ (1's complement)
3504 operators: probably not what you intended.
3506 =item <> should be quotes
3508 (F) You wrote C<< require <file> >> when you should have written
3511 =item /%s/ should probably be written as "%s"
3513 (W syntax) You have used a pattern where Perl expected to find a string,
3514 as in the first argument to C<join>. Perl will treat the true or false
3515 result of matching the pattern against $_ as the string, which is
3516 probably not what you had in mind.
3518 =item shutdown() on closed socket %s
3520 (W closed) You tried to do a shutdown on a closed socket. Seems a bit
3523 =item SIG%s handler "%s" not defined
3525 (W signal) The signal handler named in %SIG doesn't, in fact, exist.
3526 Perhaps you put it into the wrong package?
3528 =item sort is now a reserved word
3530 (F) An ancient error message that almost nobody ever runs into anymore.
3531 But before sort was a keyword, people sometimes used it as a filehandle.
3533 =item Sort subroutine didn't return a numeric value
3535 (F) A sort comparison routine must return a number. You probably blew
3536 it by not using C<< <=> >> or C<cmp>, or by not using them correctly.
3537 See L<perlfunc/sort>.
3539 =item Sort subroutine didn't return single value
3541 (F) A sort comparison subroutine may not return a list value with more
3542 or less than one element. See L<perlfunc/sort>.
3544 =item splice() offset past end of array
3546 (W misc) You attempted to specify an offset that was past the end of
3547 the array passed to splice(). Splicing will instead commence at the end
3548 of the array, rather than past it. If this isn't what you want, try
3549 explicitly pre-extending the array by assigning $#array = $offset. See
3554 (P) The split was looping infinitely. (Obviously, a split shouldn't
3555 iterate more times than there are characters of input, which is what
3556 happened.) See L<perlfunc/split>.
3558 =item Statement unlikely to be reached
3560 (W exec) You did an exec() with some statement after it other than a
3561 die(). This is almost always an error, because exec() never returns
3562 unless there was a failure. You probably wanted to use system()
3563 instead, which does return. To suppress this warning, put the exec() in
3566 =item stat() on unopened filehandle %s
3568 (W unopened) You tried to use the stat() function on a filehandle that
3569 was either never opened or has since been closed.
3571 =item Stub found while resolving method `%s' overloading %s
3573 (P) Overloading resolution over @ISA tree may be broken by importation
3574 stubs. Stubs should never be implicitly created, but explicit calls to
3575 C<can> may break this.
3577 =item Subroutine %s redefined
3579 (W redefine) You redefined a subroutine. To suppress this warning, say
3582 no warnings 'redefine';
3583 eval "sub name { ... }";
3586 =item Substitution loop
3588 (P) The substitution was looping infinitely. (Obviously, a substitution
3589 shouldn't iterate more times than there are characters of input, which
3590 is what happened.) See the discussion of substitution in
3591 L<perlop/"Quote and Quote-like Operators">.
3593 =item Substitution pattern not terminated
3595 (F) The lexer couldn't find the interior delimiter of an s/// or s{}{}
3596 construct. Remember that bracketing delimiters count nesting level.
3597 Missing the leading C<$> from variable C<$s> may cause this error.
3599 =item Substitution replacement not terminated
3601 (F) The lexer couldn't find the final delimiter of an s/// or s{}{}
3602 construct. Remember that bracketing delimiters count nesting level.
3603 Missing the leading C<$> from variable C<$s> may cause this error.
3605 =item substr outside of string
3607 (W substr),(F) You tried to reference a substr() that pointed outside of
3608 a string. That is, the absolute value of the offset was larger than the
3609 length of the string. See L<perlfunc/substr>. This warning is fatal if
3610 substr is used in an lvalue context (as the left hand side of an
3611 assignment or as a subroutine argument for example).
3613 =item suidperl is no longer needed since %s
3615 (F) Your Perl was compiled with B<-D>SETUID_SCRIPTS_ARE_SECURE_NOW, but
3616 a version of the setuid emulator somehow got run anyway.
3618 =item Switch (?(condition)... contains too many branches in regex; marked by <-- HERE in m/%s/
3620 (F) A (?(condition)if-clause|else-clause) construct can have at most two
3621 branches (the if-clause and the else-clause). If you want one or both to
3622 contain alternation, such as using C<this|that|other>, enclose it in
3623 clustering parentheses:
3625 (?(condition)(?:this|that|other)|else-clause)
3627 The <-- HERE shows in the regular expression about where the problem was
3628 discovered. See L<perlre>.
3630 =item Switch condition not recognized in regex; marked by <-- HERE in m/%s/
3632 (F) If the argument to the (?(...)if-clause|else-clause) construct is a
3633 number, it can be only a number. The <-- HERE shows in the regular expression
3634 about where the problem was discovered. See L<perlre>.
3636 =item switching effective %s is not implemented
3638 (F) While under the C<use filetest> pragma, we cannot switch the real
3639 and effective uids or gids.
3643 (F) The final summary message when a C<perl -c> succeeds.
3647 (F) Probably means you had a syntax error. Common reasons include:
3649 A keyword is misspelled.
3650 A semicolon is missing.
3652 An opening or closing parenthesis is missing.
3653 An opening or closing brace is missing.
3654 A closing quote is missing.
3656 Often there will be another error message associated with the syntax
3657 error giving more information. (Sometimes it helps to turn on B<-w>.)
3658 The error message itself often tells you where it was in the line when
3659 it decided to give up. Sometimes the actual error is several tokens
3660 before this, because Perl is good at understanding random input.
3661 Occasionally the line number may be misleading, and once in a blue moon
3662 the only way to figure out what's triggering the error is to call
3663 C<perl -c> repeatedly, chopping away half the program each time to see
3664 if the error went away. Sort of the cybernetic version of S<20
3667 =item syntax error at line %d: `%s' unexpected
3669 (A) You've accidentally run your script through the Bourne shell instead
3670 of Perl. Check the #! line, or manually feed your script into Perl
3673 =item syntax error in file %s at line %d, next 2 tokens "%s"
3675 (F) This error is likely to occur if you run a perl5 script through
3676 a perl4 interpreter, especially if the next 2 tokens are "use strict"
3677 or "my $var" or "our $var".
3679 =item sysread() on closed filehandle %s
3681 (W closed) You tried to read from a closed filehandle.
3683 =item sysread() on unopened filehandle %s
3685 (W unopened) You tried to read from a filehandle that was never opened.
3687 =item System V %s is not implemented on this machine
3689 (F) You tried to do something with a function beginning with "sem",
3690 "shm", or "msg" but that System V IPC is not implemented in your
3691 machine. In some machines the functionality can exist but be
3692 unconfigured. Consult your system support.
3694 =item syswrite() on closed filehandle %s
3696 (W closed) The filehandle you're writing to got itself closed sometime
3697 before now. Check your control flow.
3699 =item C<-T> and C<-B> not implemented on filehandles
3701 (F) Perl can't peek at the stdio buffer of filehandles when it doesn't
3702 know about your kind of stdio. You'll have to use a filename instead.
3704 =item Target of goto is too deeply nested
3706 (F) You tried to use C<goto> to reach a label that was too deeply nested
3707 for Perl to reach. Perl is doing you a favor by refusing.
3709 =item tell() on unopened filehandle
3711 (W unopened) You tried to use the tell() function on a filehandle that
3712 was either never opened or has since been closed.
3714 =item That use of $[ is unsupported
3716 (F) Assignment to C<$[> is now strictly circumscribed, and interpreted
3717 as a compiler directive. You may say only one of
3726 This is to prevent the problem of one module changing the array base out
3727 from under another module inadvertently. See L<perlvar/$[>.
3729 =item The crypt() function is unimplemented due to excessive paranoia
3731 (F) Configure couldn't find the crypt() function on your machine,
3732 probably because your vendor didn't supply it, probably because they
3733 think the U.S. Government thinks it's a secret, or at least that they
3734 will continue to pretend that it is. And if you quote me on that, I
3737 =item The %s function is unimplemented
3739 The function indicated isn't implemented on this architecture, according
3740 to the probings of Configure.
3742 =item The stat preceding %s wasn't an lstat
3744 (F) It makes no sense to test the current stat buffer for symbolic
3745 linkhood if the last stat that wrote to the stat buffer already went
3746 past the symlink to get to the real file. Use an actual filename
3749 =item The 'unique' attribute may only be applied to 'our' variables
3751 (F) Currently this attribute is not supported on C<my> or C<sub>
3752 declarations. See L<perlfunc/our>.
3754 =item This Perl can't reset CRTL environ elements (%s)
3756 =item This Perl can't set CRTL environ elements (%s=%s)
3758 (W internal) Warnings peculiar to VMS. You tried to change or delete an
3759 element of the CRTL's internal environ array, but your copy of Perl
3760 wasn't built with a CRTL that contained the setenv() function. You'll
3761 need to rebuild Perl with a CRTL that does, or redefine
3762 F<PERL_ENV_TABLES> (see L<perlvms>) so that the environ array isn't the
3763 target of the change to
3764 %ENV which produced the warning.
3766 =item thread failed to start: %s
3768 (F) The entry point function of threads->create() failed for some reason.
3770 =item times not implemented
3772 (F) Your version of the C library apparently doesn't do times(). I
3773 suspect you're not running on Unix.
3775 =item "-T" is on the #! line, it must also be used on the command line
3777 (X) The #! line (or local equivalent) in a Perl script contains the
3778 B<-T> option, but Perl was not invoked with B<-T> in its command line.
3779 This is an error because, by the time Perl discovers a B<-T> in a
3780 script, it's too late to properly taint everything from the environment.
3783 If the Perl script is being executed as a command using the #!
3784 mechanism (or its local equivalent), this error can usually be fixed by
3785 editing the #! line so that the B<-T> option is a part of Perl's first
3786 argument: e.g. change C<perl -n -T> to C<perl -T -n>.
3788 If the Perl script is being executed as C<perl scriptname>, then the
3789 B<-T> option must appear on the command line: C<perl -T scriptname>.
3791 =item To%s: illegal mapping '%s'
3793 (F) You tried to define a customized To-mapping for lc(), lcfirst,
3794 uc(), or ucfirst() (or their string-inlined versions), but you
3795 specified an illegal mapping.
3796 See L<perlunicode/"User-Defined Character Properties">.
3798 =item Too deeply nested ()-groups
3800 (F) Your template contains ()-groups with a ridiculously deep nesting level.
3802 =item Too few args to syscall
3804 (F) There has to be at least one argument to syscall() to specify the
3805 system call to call, silly dilly.
3807 =item Too late for "-%s" option
3809 (X) The #! line (or local equivalent) in a Perl script contains the
3810 B<-M> or B<-m> option. This is an error because B<-M> and B<-m> options
3811 are not intended for use inside scripts. Use the C<use> pragma instead.
3813 =item Too late to run %s block
3815 (W void) A CHECK or INIT block is being defined during run time proper,
3816 when the opportunity to run them has already passed. Perhaps you are
3817 loading a file with C<require> or C<do> when you should be using C<use>
3818 instead. Or perhaps you should put the C<require> or C<do> inside a
3821 =item Too many args to syscall
3823 (F) Perl supports a maximum of only 14 args to syscall().
3825 =item Too many arguments for %s
3827 (F) The function requires fewer arguments than you specified.
3831 (A) You've accidentally run your script through B<csh> instead of Perl.
3832 Check the #! line, or manually feed your script into Perl yourself.
3836 (A) You've accidentally run your script through B<csh> instead of Perl.
3837 Check the #! line, or manually feed your script into Perl yourself.
3839 =item Trailing \ in regex m/%s/
3841 (F) The regular expression ends with an unbackslashed backslash.
3842 Backslash it. See L<perlre>.
3844 =item Transliteration pattern not terminated
3846 (F) The lexer couldn't find the interior delimiter of a tr/// or tr[][]
3847 or y/// or y[][] construct. Missing the leading C<$> from variables
3848 C<$tr> or C<$y> may cause this error.
3850 =item Transliteration replacement not terminated
3852 (F) The lexer couldn't find the final delimiter of a tr///, tr[][],
3853 y/// or y[][] construct.
3855 =item '%s' trapped by operation mask
3857 (F) You tried to use an operator from a Safe compartment in which it's
3858 disallowed. See L<Safe>.
3860 =item truncate not implemented
3862 (F) Your machine doesn't implement a file truncation mechanism that
3863 Configure knows about.
3865 =item Type of arg %d to %s must be %s (not %s)
3867 (F) This function requires the argument in that position to be of a
3868 certain type. Arrays must be @NAME or C<@{EXPR}>. Hashes must be
3869 %NAME or C<%{EXPR}>. No implicit dereferencing is allowed--use the
3870 {EXPR} forms as an explicit dereference. See L<perlref>.
3872 =item umask not implemented
3874 (F) Your machine doesn't implement the umask function and you tried to
3875 use it to restrict permissions for yourself (EXPR & 0700).
3877 =item Unable to create sub named "%s"
3879 (F) You attempted to create or access a subroutine with an illegal name.
3881 =item Unbalanced context: %d more PUSHes than POPs
3883 (W internal) The exit code detected an internal inconsistency in how
3884 many execution contexts were entered and left.
3886 =item Unbalanced saves: %d more saves than restores
3888 (W internal) The exit code detected an internal inconsistency in how
3889 many values were temporarily localized.
3891 =item Unbalanced scopes: %d more ENTERs than LEAVEs
3893 (W internal) The exit code detected an internal inconsistency in how
3894 many blocks were entered and left.
3896 =item Unbalanced tmps: %d more allocs than frees
3898 (W internal) The exit code detected an internal inconsistency in how
3899 many mortal scalars were allocated and freed.
3901 =item Undefined format "%s" called
3903 (F) The format indicated doesn't seem to exist. Perhaps it's really in
3904 another package? See L<perlform>.
3906 =item Undefined sort subroutine "%s" called
3908 (F) The sort comparison routine specified doesn't seem to exist.
3909 Perhaps it's in a different package? See L<perlfunc/sort>.
3911 =item Undefined subroutine &%s called
3913 (F) The subroutine indicated hasn't been defined, or if it was, it has
3914 since been undefined.
3916 =item Undefined subroutine called
3918 (F) The anonymous subroutine you're trying to call hasn't been defined,
3919 or if it was, it has since been undefined.
3921 =item Undefined subroutine in sort
3923 (F) The sort comparison routine specified is declared but doesn't seem
3924 to have been defined yet. See L<perlfunc/sort>.
3926 =item Undefined top format "%s" called
3928 (F) The format indicated doesn't seem to exist. Perhaps it's really in
3929 another package? See L<perlform>.
3931 =item Undefined value assigned to typeglob
3933 (W misc) An undefined value was assigned to a typeglob, a la
3934 C<*foo = undef>. This does nothing. It's possible that you really mean
3937 =item %s: Undefined variable
3939 (A) You've accidentally run your script through B<csh> instead of Perl.
3940 Check the #! line, or manually feed your script into Perl yourself.
3942 =item unexec of %s into %s failed!
3944 (F) The unexec() routine failed for some reason. See your local FSF
3945 representative, who probably put it there in the first place.
3947 =item Unicode character %s is illegal
3949 (W utf8) Certain Unicode characters have been designated off-limits by
3950 the Unicode standard and should not be generated. If you really know
3951 what you are doing you can turn off this warning by C<no warnings 'utf8';>.
3953 =item Unknown BYTEORDER
3955 (F) There are no byte-swapping functions for a machine with this byte
3958 =item Unknown open() mode '%s'
3960 (F) The second argument of 3-argument open() is not among the list
3961 of valid modes: C<< < >>, C<< > >>, C<<< >> >>>, C<< +< >>,
3962 C<< +> >>, C<<< +>> >>>, C<-|>, C<|->, C<< <& >>, C<< >& >>.
3964 =item Unknown PerlIO layer "%s"
3966 (W layer) An attempt was made to push an unknown layer onto the Perl I/O
3967 system. (Layers take care of transforming data between external and
3968 internal representations.) Note that some layers, such as C<mmap>,
3969 are not supported in all environments. If your program didn't
3970 explicitly request the failing operation, it may be the result of the
3971 value of the environment variable PERLIO.
3973 =item Unknown process %x sent message to prime_env_iter: %s
3975 (P) An error peculiar to VMS. Perl was reading values for %ENV before
3976 iterating over it, and someone else stuck a message in the stream of
3977 data Perl expected. Someone's very confused, or perhaps trying to
3978 subvert Perl's population of %ENV for nefarious purposes.
3980 =item Unknown "re" subpragma '%s' (known ones are: %s)
3982 You tried to use an unknown subpragma of the "re" pragma.
3984 =item Unknown switch condition (?(%.2s in regex; marked by <-- HERE in m/%s/
3986 (F) The condition part of a (?(condition)if-clause|else-clause) construct
3987 is not known. The condition may be lookahead or lookbehind (the condition
3988 is true if the lookahead or lookbehind is true), a (?{...}) construct (the
3989 condition is true if the code evaluates to a true value), or a number (the
3990 condition is true if the set of capturing parentheses named by the number
3993 The <-- HERE shows in the regular expression about where the problem was
3994 discovered. See L<perlre>.
3996 =item Unknown Unicode option letter '%c'
3998 You specified an unknown Unicode option. See L<perlrun> documentation
3999 of the C<-C> switch for the list of known options.
4001 =item Unknown Unicode option value %x
4003 You specified an unknown Unicode option. See L<perlrun> documentation
4004 of the C<-C> switch for the list of known options.
4006 =item Unknown warnings category '%s'
4008 (F) An error issued by the C<warnings> pragma. You specified a warnings
4009 category that is unknown to perl at this point.
4011 Note that if you want to enable a warnings category registered by a module
4012 (e.g. C<use warnings 'File::Find'>), you must have imported this module
4015 =item unmatched [ in regex; marked by <-- HERE in m/%s/
4017 (F) The brackets around a character class must match. If you wish to
4018 include a closing bracket in a character class, backslash it or put it
4019 first. The <-- HERE shows in the regular expression about where the problem
4020 was discovered. See L<perlre>.
4022 =item unmatched ( in regex; marked by <-- HERE in m/%s/
4024 (F) Unbackslashed parentheses must always be balanced in regular
4025 expressions. If you're a vi user, the % key is valuable for finding the
4026 matching parenthesis. The <-- HERE shows in the regular expression about
4027 where the problem was discovered. See L<perlre>.
4029 =item Unmatched right %s bracket
4031 (F) The lexer counted more closing curly or square brackets than opening
4032 ones, so you're probably missing a matching opening bracket. As a
4033 general rule, you'll find the missing one (so to speak) near the place
4034 you were last editing.
4036 =item Unquoted string "%s" may clash with future reserved word
4038 (W reserved) You used a bareword that might someday be claimed as a
4039 reserved word. It's best to put such a word in quotes, or capitalize it
4040 somehow, or insert an underbar into it. You might also declare it as a
4043 =item Unrecognized character %s
4045 (F) The Perl parser has no idea what to do with the specified character
4046 in your Perl script (or eval). Perhaps you tried to run a compressed
4047 script, a binary program, or a directory as a Perl program.
4049 =item /%s/: Unrecognized escape \\%c in character class passed through
4051 (W regexp) You used a backslash-character combination which is not
4052 recognized by Perl inside character classes. The character was
4053 understood literally.
4055 =item Unrecognized escape \\%c passed through
4057 (W misc) You used a backslash-character combination which is not
4060 =item Unrecognized escape \\%c passed through in regex; marked by <-- HERE in m/%s/
4062 (W regexp) You used a backslash-character combination which is not
4063 recognized by Perl. This combination appears in an interpolated variable or
4064 a C<'>-delimited regular expression. The character was understood
4065 literally. The <-- HERE shows in the regular expression about where the
4066 escape was discovered.
4068 =item Unrecognized signal name "%s"
4070 (F) You specified a signal name to the kill() function that was not
4071 recognized. Say C<kill -l> in your shell to see the valid signal names
4074 =item Unrecognized switch: -%s (-h will show valid options)
4076 (F) You specified an illegal option to Perl. Don't do that. (If you
4077 think you didn't do that, check the #! line to see if it's supplying the
4078 bad switch on your behalf.)
4080 =item Unsuccessful %s on filename containing newline
4082 (W newline) A file operation was attempted on a filename, and that
4083 operation failed, PROBABLY because the filename contained a newline,
4084 PROBABLY because you forgot to chomp() it off. See L<perlfunc/chomp>.
4086 =item Unsupported directory function "%s" called
4088 (F) Your machine doesn't support opendir() and readdir().
4090 =item Unsupported function %s
4092 (F) This machine doesn't implement the indicated function, apparently.
4093 At least, Configure doesn't think so.
4095 =item Unsupported function fork
4097 (F) Your version of executable does not support forking.
4099 Note that under some systems, like OS/2, there may be different flavors
4100 of Perl executables, some of which may support fork, some not. Try
4101 changing the name you call Perl by to C<perl_>, C<perl__>, and so on.
4103 =item Unsupported script encoding %s
4105 (F) Your program file begins with a Unicode Byte Order Mark (BOM) which
4106 declares it to be in a Unicode encoding that Perl cannot read.
4108 =item Unsupported socket function "%s" called
4110 (F) Your machine doesn't support the Berkeley socket mechanism, or at
4111 least that's what Configure thought.
4113 =item Unterminated attribute list
4115 (F) The lexer found something other than a simple identifier at the
4116 start of an attribute, and it wasn't a semicolon or the start of a
4117 block. Perhaps you terminated the parameter list of the previous
4118 attribute too soon. See L<attributes>.
4120 =item Unterminated attribute parameter in attribute list
4122 (F) The lexer saw an opening (left) parenthesis character while parsing
4123 an attribute list, but the matching closing (right) parenthesis
4124 character was not found. You may need to add (or remove) a backslash
4125 character to get your parentheses to balance. See L<attributes>.
4127 =item Unterminated compressed integer
4129 (F) An argument to unpack("w",...) was incompatible with the BER
4130 compressed integer format and could not be converted to an integer.
4131 See L<perlfunc/pack>.
4133 =item Unterminated <> operator
4135 (F) The lexer saw a left angle bracket in a place where it was expecting
4136 a term, so it's looking for the corresponding right angle bracket, and
4137 not finding it. Chances are you left some needed parentheses out
4138 earlier in the line, and you really meant a "less than".
4140 =item untie attempted while %d inner references still exist
4142 (W untie) A copy of the object returned from C<tie> (or C<tied>) was
4143 still valid when C<untie> was called.
4145 =item Usage: POSIX::%s(%s)
4147 (F) You called a POSIX function with incorrect arguments.
4148 See L<POSIX/FUNCTIONS> for more information.
4150 =item Usage: Win32::%s(%s)
4152 (F) You called a Win32 function with incorrect arguments.
4153 See L<Win32> for more information.
4155 =item Useless (?-%s) - don't use /%s modifier in regex; marked by <-- HERE in m/%s/
4157 (W regexp) You have used an internal modifier such as (?-o) that has no
4158 meaning unless removed from the entire regexp:
4160 if ($string =~ /(?-o)$pattern/o) { ... }
4164 if ($string =~ /$pattern/) { ... }
4166 The <-- HERE shows in the regular expression about
4167 where the problem was discovered. See L<perlre>.
4169 =item Useless localization of %s
4171 (W syntax) The localization of lvalues such as C<local($x=10)> is
4172 legal, but in fact the local() currently has no effect. This may change at
4173 some point in the future, but in the meantime such code is discouraged.
4175 =item Useless (?%s) - use /%s modifier in regex; marked by <-- HERE in m/%s/
4177 (W regexp) You have used an internal modifier such as (?o) that has no
4178 meaning unless applied to the entire regexp:
4180 if ($string =~ /(?o)$pattern/) { ... }
4184 if ($string =~ /$pattern/o) { ... }
4186 The <-- HERE shows in the regular expression about
4187 where the problem was discovered. See L<perlre>.
4189 =item Useless use of %s in void context
4191 (W void) You did something without a side effect in a context that does
4192 nothing with the return value, such as a statement that doesn't return a
4193 value from a block, or the left side of a scalar comma operator. Very
4194 often this points not to stupidity on your part, but a failure of Perl
4195 to parse your program the way you thought it would. For example, you'd
4196 get this if you mixed up your C precedence with Python precedence and
4201 when you meant to say
4203 ($one, $two) = (1, 2);
4205 Another common error is to use ordinary parentheses to construct a list
4206 reference when you should be using square or curly brackets, for
4211 when you should have said
4215 The square brackets explicitly turn a list value into a scalar value,
4216 while parentheses do not. So when a parenthesized list is evaluated in
4217 a scalar context, the comma is treated like C's comma operator, which
4218 throws away the left argument, which is not what you want. See
4219 L<perlref> for more on this.
4221 This warning will not be issued for numerical constants equal to 0 or 1
4222 since they are often used in statements like
4224 1 while sub_with_side_effects() ;
4226 String constants that would normally evaluate to 0 or 1 are warned
4229 =item Useless use of "re" pragma
4231 (W) You did C<use re;> without any arguments. That isn't very useful.
4233 =item Useless use of sort in scalar context
4235 (W void) You used sort in scalar context, as in :
4239 This is not very useful, and perl currently optimizes this away.
4241 =item Useless use of %s with no values
4243 (W syntax) You used the push() or unshift() function with no arguments
4244 apart from the array, like C<push(@x)> or C<unshift(@foo)>. That won't
4245 usually have any effect on the array, so is completely useless. It's
4246 possible in principle that push(@tied_array) could have some effect
4247 if the array is tied to a class which implements a PUSH method. If so,
4248 you can write it as C<push(@tied_array,())> to avoid this warning.
4250 =item "use" not allowed in expression
4252 (F) The "use" keyword is recognized and executed at compile time, and
4253 returns no useful value. See L<perlmod>.
4255 =item Use of bare << to mean <<"" is deprecated
4257 (D deprecated) You are now encouraged to use the explicitly quoted form
4258 if you wish to use an empty line as the terminator of the here-document.
4260 =item Use of chdir('') or chdir(undef) as chdir() deprecated
4262 (D deprecated) chdir() with no arguments is documented to change to
4263 $ENV{HOME} or $ENV{LOGDIR}. chdir(undef) and chdir('') share this
4264 behavior, but that has been deprecated. In future versions they
4267 Be careful to check that what you pass to chdir() is defined and not
4268 blank, else you might find yourself in your home directory.
4270 =item Use of /c modifier is meaningless in s///
4272 (W regexp) You used the /c modifier in a substitution. The /c
4273 modifier is not presently meaningful in substitutions.
4275 =item Use of /c modifier is meaningless without /g
4277 (W regexp) You used the /c modifier with a regex operand, but didn't
4278 use the /g modifier. Currently, /c is meaningful only when /g is
4279 used. (This may change in the future.)
4281 =item Use of freed value in iteration
4283 (F) Perhaps you modified the iterated array within the loop?
4284 This error is typically caused by code like the following:
4287 @a = () for (1,2,@a);
4289 You are not supposed to modify arrays while they are being iterated over.
4290 For speed and efficiency reasons, Perl internally does not do full
4291 reference-counting of iterated items, hence deleting such an item in the
4292 middle of an iteration causes Perl to see a freed value.
4294 =item Use of *glob{FILEHANDLE} is deprecated
4296 (D deprecated) You are now encouraged to use the shorter *glob{IO} form
4297 to access the filehandle slot within a typeglob.
4299 =item Use of /g modifier is meaningless in split
4301 (W regexp) You used the /g modifier on the pattern for a C<split>
4302 operator. Since C<split> always tries to match the pattern
4303 repeatedly, the C</g> has no effect.
4305 =item Use of implicit split to @_ is deprecated
4307 (D deprecated) It makes a lot of work for the compiler when you clobber
4308 a subroutine's argument list, so it's better if you assign the results
4309 of a split() explicitly to an array (or list).
4311 =item Use of inherited AUTOLOAD for non-method %s() is deprecated
4313 (D deprecated) As an (ahem) accidental feature, C<AUTOLOAD> subroutines
4314 are looked up as methods (using the C<@ISA> hierarchy) even when the
4315 subroutines to be autoloaded were called as plain functions (e.g.
4316 C<Foo::bar()>), not as methods (e.g. C<< Foo->bar() >> or C<<
4319 This bug will be rectified in future by using method lookup only for
4320 methods' C<AUTOLOAD>s. However, there is a significant base of existing
4321 code that may be using the old behavior. So, as an interim step, Perl
4322 currently issues an optional warning when non-methods use inherited
4325 The simple rule is: Inheritance will not work when autoloading
4326 non-methods. The simple fix for old code is: In any module that used
4327 to depend on inheriting C<AUTOLOAD> for non-methods from a base class
4328 named C<BaseClass>, execute C<*AUTOLOAD = \&BaseClass::AUTOLOAD> during
4331 In code that currently says C<use AutoLoader; @ISA = qw(AutoLoader);>
4332 you should remove AutoLoader from @ISA and change C<use AutoLoader;> to
4333 C<use AutoLoader 'AUTOLOAD';>.
4335 =item Use of %s in printf format not supported
4337 (F) You attempted to use a feature of printf that is accessible from
4338 only C. This usually means there's a better way to do it in Perl.
4340 =item Use of $# is deprecated
4342 (D deprecated) This was an ill-advised attempt to emulate a poorly
4343 defined B<awk> feature. Use an explicit printf() or sprintf() instead.
4345 =item Use of %s is deprecated
4347 (D deprecated) The construct indicated is no longer recommended for use,
4348 generally because there's a better way to do it, and also because the
4349 old way has bad side effects.
4351 =item Use of -l on filehandle %s
4353 (W io) A filehandle represents an opened file, and when you opened the file
4354 it already went past any symlink you are presumably trying to look for.
4355 The operation returned C<undef>. Use a filename instead.
4357 =item Use of "package" with no arguments is deprecated
4359 (D deprecated) You used the C<package> keyword without specifying a package
4360 name. So no namespace is current at all. Using this can cause many
4361 otherwise reasonable constructs to fail in baffling ways. C<use strict;>
4364 =item Use of reference "%s" as array index
4366 (W misc) You tried to use a reference as an array index; this probably
4367 isn't what you mean, because references in numerical context tend
4368 to be huge numbers, and so usually indicates programmer error.
4370 If you really do mean it, explicitly numify your reference, like so:
4371 C<$array[0+$ref]>. This warning is not given for overloaded objects,
4372 either, because you can overload the numification and stringification
4373 operators and then you assumedly know what you are doing.
4375 =item Use of reserved word "%s" is deprecated
4377 (D deprecated) The indicated bareword is a reserved word. Future
4378 versions of perl may use it as a keyword, so you're better off either
4379 explicitly quoting the word in a manner appropriate for its context of
4380 use, or using a different name altogether. The warning can be
4381 suppressed for subroutine names by either adding a C<&> prefix, or using
4382 a package qualifier, e.g. C<&our()>, or C<Foo::our()>.
4384 =item Use of tainted arguments in %s is deprecated
4386 (W taint, deprecated) You have supplied C<system()> or C<exec()> with multiple
4387 arguments and at least one of them is tainted. This used to be allowed
4388 but will become a fatal error in a future version of perl. Untaint your
4389 arguments. See L<perlsec>.
4391 =item Use of uninitialized value%s
4393 (W uninitialized) An undefined value was used as if it were already
4394 defined. It was interpreted as a "" or a 0, but maybe it was a mistake.
4395 To suppress this warning assign a defined value to your variables.
4397 To help you figure out what was undefined, perl will try to tell you the
4398 name of the variable (if any) that was undefined. In some cases it cannot
4399 do this, so it also tells you what operation you used the undefined value
4400 in. Note, however, that perl optimizes your program and the operation
4401 displayed in the warning may not necessarily appear literally in your
4402 program. For example, C<"that $foo"> is usually optimized into C<"that "
4403 . $foo>, and the warning will refer to the C<concatenation (.)> operator,
4404 even though there is no C<.> in your program.
4406 =item Using a hash as a reference is deprecated
4408 (D deprecated) You tried to use a hash as a reference, as in
4409 C<< %foo->{"bar"} >> or C<< %$ref->{"hello"} >>. Versions of perl <= 5.6.1
4410 used to allow this syntax, but shouldn't have. It is now deprecated, and will
4411 be removed in a future version.
4413 =item Using an array as a reference is deprecated
4415 (D deprecated) You tried to use an array as a reference, as in
4416 C<< @foo->[23] >> or C<< @$ref->[99] >>. Versions of perl <= 5.6.1 used to
4417 allow this syntax, but shouldn't have. It is now deprecated, and will be
4418 removed in a future version.
4420 =item UTF-16 surrogate %s
4422 (W utf8) You tried to generate half of an UTF-16 surrogate by
4423 requesting a Unicode character between the code points 0xD800 and
4424 0xDFFF (inclusive). That range is reserved exclusively for the use of
4425 UTF-16 encoding (by having two 16-bit UCS-2 characters); but Perl
4426 encodes its characters in UTF-8, so what you got is a very illegal
4427 character. If you really know what you are doing you can turn off
4428 this warning by C<no warnings 'utf8';>.
4430 =item Value of %s can be "0"; test with defined()
4432 (W misc) In a conditional expression, you used <HANDLE>, <*> (glob),
4433 C<each()>, or C<readdir()> as a boolean value. Each of these constructs
4434 can return a value of "0"; that would make the conditional expression
4435 false, which is probably not what you intended. When using these
4436 constructs in conditional expressions, test their values with the
4437 C<defined> operator.
4439 =item Value of CLI symbol "%s" too long
4441 (W misc) A warning peculiar to VMS. Perl tried to read the value of an
4442 %ENV element from a CLI symbol table, and found a resultant string
4443 longer than 1024 characters. The return value has been truncated to
4446 =item Variable "%s" is not available
4448 (W closure) During compilation, an inner named subroutine or eval is
4449 attempting to capture an outer lexical that is not currently available.
4450 This can happen for one of two reasons. First, the outer lexical may be
4451 declared in an outer anonymous subroutine that has not yet been created.
4452 (Remember that named subs are created at compile time, while anonymous
4453 subs are created at run-time.) For example,
4455 sub { my $a; sub f { $a } }
4457 At the time that f is created, it can't capture the current value of $a,
4458 since the anonymous subroutine hasn't been created yet. Conversely,
4459 the following won't give a warning since the anonymous subroutine has by
4460 now been created and is live:
4462 sub { my $a; eval 'sub f { $a }' }->();
4464 The second situation is caused by an eval accessing a variable that has
4465 gone out of scope, for example,
4473 Here, when the '$a' in the eval is being compiled, f() is not currently being
4474 executed, so its $a is not available for capture.
4476 =item Variable "%s" is not imported%s
4478 (F) While "use strict" in effect, you referred to a global variable that
4479 you apparently thought was imported from another module, because
4480 something else of the same name (usually a subroutine) is exported by
4481 that module. It usually means you put the wrong funny character on the
4482 front of your variable.
4484 =item Variable length lookbehind not implemented in regex; marked by <-- HERE in m/%s/
4486 (F) Lookbehind is allowed only for subexpressions whose length is fixed and
4487 known at compile time. The <-- HERE shows in the regular expression about
4488 where the problem was discovered. See L<perlre>.
4490 =item "%s" variable %s masks earlier declaration in same %s
4492 (W misc) A "my" or "our" variable has been redeclared in the current
4493 scope or statement, effectively eliminating all access to the previous
4494 instance. This is almost always a typographical error. Note that the
4495 earlier variable will still exist until the end of the scope or until
4496 all closure referents to it are destroyed.
4498 =item Variable syntax
4500 (A) You've accidentally run your script through B<csh> instead
4501 of Perl. Check the #! line, or manually feed your script into
4504 =item Variable "%s" will not stay shared
4506 (W closure) An inner (nested) I<named> subroutine is referencing a
4507 lexical variable defined in an outer named subroutine.
4509 When the inner subroutine is called, it will see the value of
4510 the outer subroutine's variable as it was before and during the *first*
4511 call to the outer subroutine; in this case, after the first call to the
4512 outer subroutine is complete, the inner and outer subroutines will no
4513 longer share a common value for the variable. In other words, the
4514 variable will no longer be shared.
4516 This problem can usually be solved by making the inner subroutine
4517 anonymous, using the C<sub {}> syntax. When inner anonymous subs that
4518 reference variables in outer subroutines are created, they
4519 are automatically rebound to the current values of such variables.
4521 =item Version number must be a constant number
4523 (P) The attempt to translate a C<use Module n.n LIST> statement into
4524 its equivalent C<BEGIN> block found an internal inconsistency with
4527 =item v-string in use/require is non-portable
4529 (W portable) The use of v-strings is non-portable to older, pre-5.6, Perls.
4530 If you want your scripts to be backward portable, use the floating
4531 point version number: for example, instead of C<use 5.6.1> say
4532 C<use 5.006_001>. This of course won't help: the older Perls
4533 won't suddenly start understanding newer features, but at least
4534 they will show a sensible error message indicating the required
4537 =item Warning: something's wrong
4539 (W) You passed warn() an empty string (the equivalent of C<warn "">) or
4540 you called it with no args and C<$_> was empty.
4542 =item Warning: unable to close filehandle %s properly
4544 (S) The implicit close() done by an open() got an error indication on
4545 the close(). This usually indicates your file system ran out of disk
4548 =item Warning: Use of "%s" without parentheses is ambiguous
4550 (S ambiguous) You wrote a unary operator followed by something that
4551 looks like a binary operator that could also have been interpreted as a
4552 term or unary operator. For instance, if you know that the rand
4553 function has a default argument of 1.0, and you write
4557 you may THINK you wrote the same thing as
4561 but in actual fact, you got
4565 So put in parentheses to say what you really mean.
4567 =item Wide character in %s
4569 (W utf8) Perl met a wide character (>255) when it wasn't expecting
4570 one. This warning is by default on for I/O (like print). The easiest
4571 way to quiet this warning is simply to add the C<:utf8> layer to the
4572 output, e.g. C<binmode STDOUT, ':utf8'>. Another way to turn off the
4573 warning is to add C<no warnings 'utf8';> but that is often closer to
4574 cheating. In general, you are supposed to explicitly mark the
4575 filehandle with an encoding, see L<open> and L<perlfunc/binmode>.
4577 =item Within []-length '%c' not allowed
4579 (F) The count in the (un)pack template may be replaced by C<[TEMPLATE]> only if
4580 C<TEMPLATE> always matches the same amount of packed bytes that can be
4581 determined from the template alone. This is not possible if it contains an
4582 of the codes @, /, U, u, w or a *-length. Redesign the template.
4584 =item write() on closed filehandle %s
4586 (W closed) The filehandle you're writing to got itself closed sometime
4587 before now. Check your control flow.
4589 =item %s "\x%s" does not map to Unicode
4591 When reading in different encodings Perl tries to map everything
4592 into Unicode characters. The bytes you read in are not legal in
4593 this encoding, for example
4595 utf8 "\xE4" does not map to Unicode
4597 if you try to read in the a-diaereses Latin-1 as UTF-8.
4599 =item 'X' outside of string
4601 (F) You had a (un)pack template that specified a relative position before
4602 the beginning of the string being (un)packed. See L<perlfunc/pack>.
4604 =item 'x' outside of string in unpack
4606 (F) You had a pack template that specified a relative position after
4607 the end of the string being unpacked. See L<perlfunc/pack>.
4609 =item Xsub "%s" called in sort
4611 (F) The use of an external subroutine as a sort comparison is not yet
4614 =item Xsub called in sort
4616 (F) The use of an external subroutine as a sort comparison is not yet
4619 =item YOU HAVEN'T DISABLED SET-ID SCRIPTS IN THE KERNEL YET!
4621 (F) And you probably never will, because you probably don't have the
4622 sources to your kernel, and your vendor probably doesn't give a rip
4623 about what you want. Your best bet is to put a setuid C wrapper around
4626 =item You need to quote "%s"
4628 (W syntax) You assigned a bareword as a signal handler name.
4629 Unfortunately, you already have a subroutine of that name declared,
4630 which means that Perl 5 will try to call the subroutine when the
4631 assignment is executed, which is probably not what you want. (If it IS
4632 what you want, put an & in front.)
4634 =item Your random numbers are not that random
4636 (F) When trying to initialise the random seed for hashes, Perl could
4637 not get any randomness out of your system. This usually indicates
4638 Something Very Wrong.