3 perlapi - autogenerated documentation for the perl public API
7 This file contains the documentation of the perl public API generated by
8 embed.pl, specifically a listing of functions, macros, flags, and variables
9 that may be used by extension writers. The interfaces of any functions that
10 are not listed here are subject to change without notice. For this reason,
11 blindly using functions listed in proto.h is to be avoided when writing
14 Note that all Perl API global variables must be referenced with the C<PL_>
15 prefix. Some macros are provided for compatibility with the older,
16 unadorned names, but this support may be disabled in a future release.
18 The listing is alphabetical, case insensitive.
24 Same as C<av_len()>. Deprecated, use C<av_len()> instead.
33 Clears an array, making it empty. Does not free the memory used by the
43 Deletes the element indexed by C<key> from the array. Returns the
44 deleted element. C<flags> is currently ignored.
46 SV* av_delete(AV* ar, I32 key, I32 flags)
53 Returns true if the element indexed by C<key> has been initialized.
55 This relies on the fact that uninitialized array elements are set to
58 bool av_exists(AV* ar, I32 key)
65 Pre-extend an array. The C<key> is the index to which the array should be
68 void av_extend(AV* ar, I32 key)
75 Returns the SV at the specified index in the array. The C<key> is the
76 index. If C<lval> is set then the fetch will be part of a store. Check
77 that the return value is non-null before dereferencing it to a C<SV*>.
79 See L<perlguts/"Understanding the Magic of Tied Hashes and Arrays"> for
80 more information on how to use this function on tied arrays.
82 SV** av_fetch(AV* ar, I32 key, I32 lval)
89 Ensure than an array has a given number of elements, equivalent to
90 Perl's C<$#array = $fill;>.
92 void av_fill(AV* ar, I32 fill)
99 Returns the highest index in the array. Returns -1 if the array is
109 Creates a new AV and populates it with a list of SVs. The SVs are copied
110 into the array, so they may be freed after the call to av_make. The new AV
111 will have a reference count of 1.
113 AV* av_make(I32 size, SV** svp)
120 Pops an SV off the end of the array. Returns C<&PL_sv_undef> if the array
130 Pushes an SV onto the end of the array. The array will grow automatically
131 to accommodate the addition.
133 void av_push(AV* ar, SV* val)
140 Shifts an SV off the beginning of the array.
149 Stores an SV in an array. The array index is specified as C<key>. The
150 return value will be NULL if the operation failed or if the value did not
151 need to be actually stored within the array (as in the case of tied
152 arrays). Otherwise it can be dereferenced to get the original C<SV*>. Note
153 that the caller is responsible for suitably incrementing the reference
154 count of C<val> before the call, and decrementing it if the function
157 See L<perlguts/"Understanding the Magic of Tied Hashes and Arrays"> for
158 more information on how to use this function on tied arrays.
160 SV** av_store(AV* ar, I32 key, SV* val)
167 Undefines the array. Frees the memory used by the array itself.
169 void av_undef(AV* ar)
176 Unshift the given number of C<undef> values onto the beginning of the
177 array. The array will grow automatically to accommodate the addition. You
178 must then use C<av_store> to assign values to these new elements.
180 void av_unshift(AV* ar, I32 num)
185 =item bytes_from_utf8
187 Converts a string C<s> of length C<len> from UTF8 into byte encoding.
188 Unlike <utf8_to_bytes> but like C<bytes_to_utf8>, returns a pointer to
189 the newly-created string, and updates C<len> to contain the new
190 length. Returns the original string if no conversion occurs, C<len>
191 is unchanged. Do nothing if C<is_utf8> points to 0. Sets C<is_utf8> to
192 0 if C<s> is converted or contains all 7bit characters.
194 NOTE: this function is experimental and may change or be
195 removed without notice.
197 U8* bytes_from_utf8(U8 *s, STRLEN *len, bool *is_utf8)
204 Converts a string C<s> of length C<len> from ASCII into UTF8 encoding.
205 Returns a pointer to the newly-created string, and sets C<len> to
206 reflect the new length.
208 NOTE: this function is experimental and may change or be
209 removed without notice.
211 U8* bytes_to_utf8(U8 *s, STRLEN *len)
218 Performs a callback to the specified Perl sub. See L<perlcall>.
220 NOTE: the perl_ form of this function is deprecated.
222 I32 call_argv(const char* sub_name, I32 flags, char** argv)
229 Performs a callback to the specified Perl method. The blessed object must
230 be on the stack. See L<perlcall>.
232 NOTE: the perl_ form of this function is deprecated.
234 I32 call_method(const char* methname, I32 flags)
241 Performs a callback to the specified Perl sub. See L<perlcall>.
243 NOTE: the perl_ form of this function is deprecated.
245 I32 call_pv(const char* sub_name, I32 flags)
252 Performs a callback to the Perl sub whose name is in the SV. See
255 NOTE: the perl_ form of this function is deprecated.
257 I32 call_sv(SV* sv, I32 flags)
264 Variable which is setup by C<xsubpp> to indicate the
265 class name for a C++ XS constructor. This is always a C<char*>. See C<THIS>.
274 The XSUB-writer's interface to the C C<memcpy> function. The C<src> is the
275 source, C<dest> is the destination, C<nitems> is the number of items, and C<type> is
276 the type. May fail on overlapping copies. See also C<Move>.
278 void Copy(void* src, void* dest, int nitems, type)
281 Found in file handy.h
285 This is the XSUB-writer's interface to Perl's C<die> function.
286 Normally use this function the same way you use the C C<printf>
287 function. See C<warn>.
289 If you want to throw an exception object, assign the object to
290 C<$@> and then pass C<Nullch> to croak():
292 errsv = get_sv("@", TRUE);
293 sv_setsv(errsv, exception_object);
296 void croak(const char* pat, ...)
303 Returns the stash of the CV.
312 If C<cv> is a constant sub eligible for inlining. returns the constant
313 value returned by the sub. Otherwise, returns NULL.
315 Constant subs can be created with C<newCONSTSUB> or as described in
316 L<perlsub/"Constant Functions">.
318 SV* cv_const_sv(CV* cv)
325 Declare a stack marker variable, C<mark>, for the XSUB. See C<MARK> and
335 Saves the original stack mark for the XSUB. See C<ORIGMARK>.
344 Declares a local copy of perl's stack pointer for the XSUB, available via
345 the C<SP> macro. See C<SP>.
354 Sets up stack and mark pointers for an XSUB, calling dSP and dMARK. This
355 is usually handled automatically by C<xsubpp>. Declares the C<items>
356 variable to indicate the number of items on the stack.
365 Sets up the C<ix> variable for an XSUB which has aliases. This is usually
366 handled automatically by C<xsubpp>.
375 Opening bracket on a callback. See C<LEAVE> and L<perlcall>.
380 Found in file scope.h
384 Tells Perl to C<eval> the given string and return an SV* result.
386 NOTE: the perl_ form of this function is deprecated.
388 SV* eval_pv(const char* p, I32 croak_on_error)
395 Tells Perl to C<eval> the string in the SV.
397 NOTE: the perl_ form of this function is deprecated.
399 I32 eval_sv(SV* sv, I32 flags)
406 Used to extend the argument stack for an XSUB's return values. Once
407 used, guarantees that there is room for at least C<nitems> to be pushed
410 void EXTEND(SP, int nitems)
417 Analyses the string in order to make fast searches on it using fbm_instr()
418 -- the Boyer-Moore algorithm.
420 void fbm_compile(SV* sv, U32 flags)
427 Returns the location of the SV in the string delimited by C<str> and
428 C<strend>. It returns C<Nullch> if the string can't be found. The C<sv>
429 does not have to be fbm_compiled, but the search will not be as fast
432 char* fbm_instr(unsigned char* big, unsigned char* bigend, SV* littlesv, U32 flags)
439 Closing bracket for temporaries on a callback. See C<SAVETMPS> and
445 Found in file scope.h
449 Returns the AV of the specified Perl array. If C<create> is set and the
450 Perl variable does not exist then it will be created. If C<create> is not
451 set and the variable does not exist then NULL is returned.
453 NOTE: the perl_ form of this function is deprecated.
455 AV* get_av(const char* name, I32 create)
462 Returns the CV of the specified Perl subroutine. If C<create> is set and
463 the Perl subroutine does not exist then it will be declared (which has the
464 same effect as saying C<sub name;>). If C<create> is not set and the
465 subroutine does not exist then NULL is returned.
467 NOTE: the perl_ form of this function is deprecated.
469 CV* get_cv(const char* name, I32 create)
476 Returns the HV of the specified Perl hash. If C<create> is set and the
477 Perl variable does not exist then it will be created. If C<create> is not
478 set and the variable does not exist then NULL is returned.
480 NOTE: the perl_ form of this function is deprecated.
482 HV* get_hv(const char* name, I32 create)
489 Returns the SV of the specified Perl scalar. If C<create> is set and the
490 Perl variable does not exist then it will be created. If C<create> is not
491 set and the variable does not exist then NULL is returned.
493 NOTE: the perl_ form of this function is deprecated.
495 SV* get_sv(const char* name, I32 create)
502 A backward-compatible version of C<GIMME_V> which can only return
503 C<G_SCALAR> or C<G_ARRAY>; in a void context, it returns C<G_SCALAR>.
504 Deprecated. Use C<GIMME_V> instead.
513 The XSUB-writer's equivalent to Perl's C<wantarray>. Returns C<G_VOID>,
514 C<G_SCALAR> or C<G_ARRAY> for void, scalar or list context,
524 Return the SV from the GV.
533 Returns the glob with the given C<name> and a defined subroutine or
534 C<NULL>. The glob lives in the given C<stash>, or in the stashes
535 accessible via @ISA and @UNIVERSAL.
537 The argument C<level> should be either 0 or -1. If C<level==0>, as a
538 side-effect creates a glob with the given C<name> in the given C<stash>
539 which in the case of success contains an alias for the subroutine, and sets
540 up caching info for this glob. Similarly for all the searched stashes.
542 This function grants C<"SUPER"> token as a postfix of the stash name. The
543 GV returned from C<gv_fetchmeth> may be a method cache entry, which is not
544 visible to Perl code. So when calling C<call_sv>, you should not use
545 the GV directly; instead, you should use the method's CV, which can be
546 obtained from the GV with the C<GvCV> macro.
548 GV* gv_fetchmeth(HV* stash, const char* name, STRLEN len, I32 level)
555 See L<gv_fetchmethod_autoload>.
557 GV* gv_fetchmethod(HV* stash, const char* name)
562 =item gv_fetchmethod_autoload
564 Returns the glob which contains the subroutine to call to invoke the method
565 on the C<stash>. In fact in the presence of autoloading this may be the
566 glob for "AUTOLOAD". In this case the corresponding variable $AUTOLOAD is
569 The third parameter of C<gv_fetchmethod_autoload> determines whether
570 AUTOLOAD lookup is performed if the given method is not present: non-zero
571 means yes, look for AUTOLOAD; zero means no, don't look for AUTOLOAD.
572 Calling C<gv_fetchmethod> is equivalent to calling C<gv_fetchmethod_autoload>
573 with a non-zero C<autoload> parameter.
575 These functions grant C<"SUPER"> token as a prefix of the method name. Note
576 that if you want to keep the returned glob for a long time, you need to
577 check for it being "AUTOLOAD", since at the later time the call may load a
578 different subroutine due to $AUTOLOAD changing its value. Use the glob
579 created via a side effect to do this.
581 These functions have the same side-effects and as C<gv_fetchmeth> with
582 C<level==0>. C<name> should be writable if contains C<':'> or C<'
583 ''>. The warning against passing the GV returned by C<gv_fetchmeth> to
584 C<call_sv> apply equally to these functions.
586 GV* gv_fetchmethod_autoload(HV* stash, const char* name, I32 autoload)
593 Returns a pointer to the stash for a specified package. C<name> should
594 be a valid UTF-8 string. If C<create> is set then the package will be
595 created if it does not already exist. If C<create> is not set and the
596 package does not exist then NULL is returned.
598 HV* gv_stashpv(const char* name, I32 create)
605 Returns a pointer to the stash for a specified package, which must be a
606 valid UTF-8 string. See C<gv_stashpv>.
608 HV* gv_stashsv(SV* sv, I32 create)
615 Used to indicate list context. See C<GIMME_V>, C<GIMME> and
623 Indicates that arguments returned from a callback should be discarded. See
631 Used to force a Perl C<eval> wrapper around a callback. See
639 Indicates that no arguments are being sent to a callback. See
647 Used to indicate scalar context. See C<GIMME_V>, C<GIMME>, and
655 Used to indicate void context. See C<GIMME_V> and L<perlcall>.
662 This flag, used in the length slot of hash entries and magic structures,
663 specifies the structure contains a C<SV*> pointer where a C<char*> pointer
664 is to be expected. (For information only--not to be used).
671 Returns the computed hash stored in the hash entry.
680 Returns the actual pointer stored in the key slot of the hash entry. The
681 pointer may be either C<char*> or C<SV*>, depending on the value of
682 C<HeKLEN()>. Can be assigned to. The C<HePV()> or C<HeSVKEY()> macros are
683 usually preferable for finding the value of a key.
692 If this is negative, and amounts to C<HEf_SVKEY>, it indicates the entry
693 holds an C<SV*> key. Otherwise, holds the actual length of the key. Can
694 be assigned to. The C<HePV()> macro is usually preferable for finding key
697 STRLEN HeKLEN(HE* he)
704 Returns the key slot of the hash entry as a C<char*> value, doing any
705 necessary dereferencing of possibly C<SV*> keys. The length of the string
706 is placed in C<len> (this is a macro, so do I<not> use C<&len>). If you do
707 not care about what the length of the key is, you may use the global
708 variable C<PL_na>, though this is rather less efficient than using a local
709 variable. Remember though, that hash keys in perl are free to contain
710 embedded nulls, so using C<strlen()> or similar is not a good way to find
711 the length of hash keys. This is very similar to the C<SvPV()> macro
712 described elsewhere in this document.
714 char* HePV(HE* he, STRLEN len)
721 Returns the key as an C<SV*>, or C<Nullsv> if the hash entry does not
722 contain an C<SV*> key.
731 Returns the key as an C<SV*>. Will create and return a temporary mortal
732 C<SV*> if the hash entry contains only a C<char*> key.
734 SV* HeSVKEY_force(HE* he)
741 Sets the key to a given C<SV*>, taking care to set the appropriate flags to
742 indicate the presence of an C<SV*> key, and returns the same
745 SV* HeSVKEY_set(HE* he, SV* sv)
752 Returns the value slot (type C<SV*>) stored in the hash entry.
761 Returns the package name of a stash. See C<SvSTASH>, C<CvSTASH>.
763 char* HvNAME(HV* stash)
770 Clears a hash, making it empty.
772 void hv_clear(HV* tb)
779 Deletes a key/value pair in the hash. The value SV is removed from the
780 hash and returned to the caller. The C<klen> is the length of the key.
781 The C<flags> value will normally be zero; if set to G_DISCARD then NULL
784 SV* hv_delete(HV* tb, const char* key, I32 klen, I32 flags)
791 Deletes a key/value pair in the hash. The value SV is removed from the
792 hash and returned to the caller. The C<flags> value will normally be zero;
793 if set to G_DISCARD then NULL will be returned. C<hash> can be a valid
794 precomputed hash value, or 0 to ask for it to be computed.
796 SV* hv_delete_ent(HV* tb, SV* key, I32 flags, U32 hash)
803 Returns a boolean indicating whether the specified hash key exists. The
804 C<klen> is the length of the key.
806 bool hv_exists(HV* tb, const char* key, I32 klen)
813 Returns a boolean indicating whether the specified hash key exists. C<hash>
814 can be a valid precomputed hash value, or 0 to ask for it to be
817 bool hv_exists_ent(HV* tb, SV* key, U32 hash)
824 Returns the SV which corresponds to the specified key in the hash. The
825 C<klen> is the length of the key. If C<lval> is set then the fetch will be
826 part of a store. Check that the return value is non-null before
827 dereferencing it to a C<SV*>.
829 See L<perlguts/"Understanding the Magic of Tied Hashes and Arrays"> for more
830 information on how to use this function on tied hashes.
832 SV** hv_fetch(HV* tb, const char* key, I32 klen, I32 lval)
839 Returns the hash entry which corresponds to the specified key in the hash.
840 C<hash> must be a valid precomputed hash number for the given C<key>, or 0
841 if you want the function to compute it. IF C<lval> is set then the fetch
842 will be part of a store. Make sure the return value is non-null before
843 accessing it. The return value when C<tb> is a tied hash is a pointer to a
844 static location, so be sure to make a copy of the structure if you need to
847 See L<perlguts/"Understanding the Magic of Tied Hashes and Arrays"> for more
848 information on how to use this function on tied hashes.
850 HE* hv_fetch_ent(HV* tb, SV* key, I32 lval, U32 hash)
857 Prepares a starting point to traverse a hash table. Returns the number of
858 keys in the hash (i.e. the same as C<HvKEYS(tb)>). The return value is
859 currently only meaningful for hashes without tie magic.
861 NOTE: Before version 5.004_65, C<hv_iterinit> used to return the number of
862 hash buckets that happen to be in use. If you still need that esoteric
863 value, you can get it through the macro C<HvFILL(tb)>.
865 I32 hv_iterinit(HV* tb)
872 Returns the key from the current position of the hash iterator. See
875 char* hv_iterkey(HE* entry, I32* retlen)
882 Returns the key as an C<SV*> from the current position of the hash
883 iterator. The return value will always be a mortal copy of the key. Also
886 SV* hv_iterkeysv(HE* entry)
893 Returns entries from a hash iterator. See C<hv_iterinit>.
895 HE* hv_iternext(HV* tb)
902 Performs an C<hv_iternext>, C<hv_iterkey>, and C<hv_iterval> in one
905 SV* hv_iternextsv(HV* hv, char** key, I32* retlen)
912 Returns the value from the current position of the hash iterator. See
915 SV* hv_iterval(HV* tb, HE* entry)
922 Adds magic to a hash. See C<sv_magic>.
924 void hv_magic(HV* hv, GV* gv, int how)
931 Stores an SV in a hash. The hash key is specified as C<key> and C<klen> is
932 the length of the key. The C<hash> parameter is the precomputed hash
933 value; if it is zero then Perl will compute it. The return value will be
934 NULL if the operation failed or if the value did not need to be actually
935 stored within the hash (as in the case of tied hashes). Otherwise it can
936 be dereferenced to get the original C<SV*>. Note that the caller is
937 responsible for suitably incrementing the reference count of C<val> before
938 the call, and decrementing it if the function returned NULL.
940 See L<perlguts/"Understanding the Magic of Tied Hashes and Arrays"> for more
941 information on how to use this function on tied hashes.
943 SV** hv_store(HV* tb, const char* key, I32 klen, SV* val, U32 hash)
950 Stores C<val> in a hash. The hash key is specified as C<key>. The C<hash>
951 parameter is the precomputed hash value; if it is zero then Perl will
952 compute it. The return value is the new hash entry so created. It will be
953 NULL if the operation failed or if the value did not need to be actually
954 stored within the hash (as in the case of tied hashes). Otherwise the
955 contents of the return value can be accessed using the C<He???> macros
956 described here. Note that the caller is responsible for suitably
957 incrementing the reference count of C<val> before the call, and
958 decrementing it if the function returned NULL.
960 See L<perlguts/"Understanding the Magic of Tied Hashes and Arrays"> for more
961 information on how to use this function on tied hashes.
963 HE* hv_store_ent(HV* tb, SV* key, SV* val, U32 hash)
972 void hv_undef(HV* tb)
979 Returns a boolean indicating whether the C C<char> is an ASCII alphanumeric
980 character (including underscore) or digit.
982 bool isALNUM(char ch)
985 Found in file handy.h
989 Returns a boolean indicating whether the C C<char> is an ASCII alphabetic
992 bool isALPHA(char ch)
995 Found in file handy.h
999 Returns a boolean indicating whether the C C<char> is an ASCII
1002 bool isDIGIT(char ch)
1005 Found in file handy.h
1009 Returns a boolean indicating whether the C C<char> is a lowercase
1012 bool isLOWER(char ch)
1015 Found in file handy.h
1019 Returns a boolean indicating whether the C C<char> is whitespace.
1021 bool isSPACE(char ch)
1024 Found in file handy.h
1028 Returns a boolean indicating whether the C C<char> is an uppercase
1031 bool isUPPER(char ch)
1034 Found in file handy.h
1038 Tests if some arbitrary number of bytes begins in a valid UTF-8
1039 character. Note that an INVARIANT (i.e. ASCII) character is a valid UTF-8 character.
1040 The actual number of bytes in the UTF-8 character will be returned if
1041 it is valid, otherwise 0.
1043 STRLEN is_utf8_char(U8 *p)
1046 Found in file utf8.c
1048 =item is_utf8_string
1050 Returns true if first C<len> bytes of the given string form a valid UTF8
1051 string, false otherwise. Note that 'a valid UTF8 string' does not mean
1052 'a string that contains UTF8' because a valid ASCII string is a valid
1055 bool is_utf8_string(U8 *s, STRLEN len)
1058 Found in file utf8.c
1062 Variable which is setup by C<xsubpp> to indicate the number of
1063 items on the stack. See L<perlxs/"Variable-length Parameter Lists">.
1068 Found in file XSUB.h
1072 Variable which is setup by C<xsubpp> to indicate which of an
1073 XSUB's aliases was used to invoke it. See L<perlxs/"The ALIAS: Keyword">.
1078 Found in file XSUB.h
1082 Closing bracket on a callback. See C<ENTER> and L<perlcall>.
1087 Found in file scope.h
1091 Loads the module whose name is pointed to by the string part of name.
1092 Note that the actual module name, not its filename, should be given.
1093 Eg, "Foo::Bar" instead of "Foo/Bar.pm". flags can be any of
1094 PERL_LOADMOD_DENY, PERL_LOADMOD_NOIMPORT, or PERL_LOADMOD_IMPORT_OPS
1095 (or 0 for no flags). ver, if specified, provides version semantics
1096 similar to C<use Foo::Bar VERSION>. The optional trailing SV*
1097 arguments can be used to specify arguments to the module's import()
1098 method, similar to C<use Foo::Bar VERSION LIST>.
1100 void load_module(U32 flags, SV* name, SV* ver, ...)
1105 =item looks_like_number
1107 Test if an the content of an SV looks like a number (or is a
1108 number). C<Inf> and C<Infinity> are treated as numbers (so will not
1109 issue a non-numeric warning), even if your atof() doesn't grok them.
1111 I32 looks_like_number(SV* sv)
1118 Stack marker variable for the XSUB. See C<dMARK>.
1125 Clear something magical that the SV represents. See C<sv_magic>.
1127 int mg_clear(SV* sv)
1134 Copies the magic from one SV to another. See C<sv_magic>.
1136 int mg_copy(SV* sv, SV* nsv, const char* key, I32 klen)
1143 Finds the magic pointer for type matching the SV. See C<sv_magic>.
1145 MAGIC* mg_find(SV* sv, int type)
1152 Free any magic storage used by the SV. See C<sv_magic>.
1161 Do magic after a value is retrieved from the SV. See C<sv_magic>.
1170 Report on the SV's length. See C<sv_magic>.
1172 U32 mg_length(SV* sv)
1179 Turns on the magical status of an SV. See C<sv_magic>.
1181 void mg_magical(SV* sv)
1188 Do magic after a value is assigned to the SV. See C<sv_magic>.
1197 The XSUB-writer's interface to the C C<memmove> function. The C<src> is the
1198 source, C<dest> is the destination, C<nitems> is the number of items, and C<type> is
1199 the type. Can do overlapping moves. See also C<Copy>.
1201 void Move(void* src, void* dest, int nitems, type)
1204 Found in file handy.h
1208 The XSUB-writer's interface to the C C<malloc> function.
1210 void New(int id, void* ptr, int nitems, type)
1213 Found in file handy.h
1217 Creates a new AV. The reference count is set to 1.
1226 The XSUB-writer's interface to the C C<malloc> function, with
1229 void Newc(int id, void* ptr, int nitems, type, cast)
1232 Found in file handy.h
1236 Creates a constant sub equivalent to Perl C<sub FOO () { 123 }> which is
1237 eligible for inlining at compile-time.
1239 CV* newCONSTSUB(HV* stash, char* name, SV* sv)
1246 Creates a new HV. The reference count is set to 1.
1255 Creates an RV wrapper for an SV. The reference count for the original SV is
1258 SV* newRV_inc(SV* sv)
1265 Creates an RV wrapper for an SV. The reference count for the original
1266 SV is B<not> incremented.
1268 SV* newRV_noinc(SV *sv)
1275 Creates a new SV. A non-zero C<len> parameter indicates the number of
1276 bytes of preallocated string space the SV should have. An extra byte for a
1277 tailing NUL is also reserved. (SvPOK is not set for the SV even if string
1278 space is allocated.) The reference count for the new SV is set to 1.
1279 C<id> is an integer id between 0 and 1299 (used to identify leaks).
1281 SV* NEWSV(int id, STRLEN len)
1284 Found in file handy.h
1288 Creates a new SV and copies an integer into it. The reference count for the
1298 Creates a new SV and copies a floating point value into it.
1299 The reference count for the SV is set to 1.
1308 Creates a new SV and copies a string into it. The reference count for the
1309 SV is set to 1. If C<len> is zero, Perl will compute the length using
1310 strlen(). For efficiency, consider using C<newSVpvn> instead.
1312 SV* newSVpv(const char* s, STRLEN len)
1319 Creates a new SV an initialize it with the string formatted like
1322 SV* newSVpvf(const char* pat, ...)
1329 Creates a new SV and copies a string into it. The reference count for the
1330 SV is set to 1. Note that if C<len> is zero, Perl will create a zero length
1331 string. You are responsible for ensuring that the source string is at least
1334 SV* newSVpvn(const char* s, STRLEN len)
1339 =item newSVpvn_share
1341 Creates a new SV and populates it with a string from
1342 the string table. Turns on READONLY and FAKE.
1343 The idea here is that as string table is used for shared hash
1344 keys these strings will have SvPVX == HeKEY and hash lookup
1345 will avoid string compare.
1347 SV* newSVpvn_share(const char* s, I32 len, U32 hash)
1354 Creates a new SV for the RV, C<rv>, to point to. If C<rv> is not an RV then
1355 it will be upgraded to one. If C<classname> is non-null then the new SV will
1356 be blessed in the specified package. The new SV is returned and its
1357 reference count is 1.
1359 SV* newSVrv(SV* rv, const char* classname)
1366 Creates a new SV which is an exact duplicate of the original SV.
1368 SV* newSVsv(SV* old)
1375 Creates a new SV and copies an unsigned integer into it.
1376 The reference count for the SV is set to 1.
1385 Used by C<xsubpp> to hook up XSUBs as Perl subs.
1392 Used by C<xsubpp> to hook up XSUBs as Perl subs. Adds Perl prototypes to
1396 Found in file XSUB.h
1400 The XSUB-writer's interface to the C C<malloc> function. The allocated
1401 memory is zeroed with C<memzero>.
1403 void Newz(int id, void* ptr, int nitems, type)
1406 Found in file handy.h
1417 Null character pointer.
1420 Found in file handy.h
1441 Found in file handy.h
1445 The original stack mark for the XSUB. See C<dORIGMARK>.
1452 Allocates a new Perl interpreter. See L<perlembed>.
1454 PerlInterpreter* perl_alloc()
1457 Found in file perl.c
1459 =item perl_construct
1461 Initializes a new Perl interpreter. See L<perlembed>.
1463 void perl_construct(PerlInterpreter* interp)
1466 Found in file perl.c
1470 Shuts down a Perl interpreter. See L<perlembed>.
1472 void perl_destruct(PerlInterpreter* interp)
1475 Found in file perl.c
1479 Releases a Perl interpreter. See L<perlembed>.
1481 void perl_free(PerlInterpreter* interp)
1484 Found in file perl.c
1488 Tells a Perl interpreter to parse a Perl script. See L<perlembed>.
1490 int perl_parse(PerlInterpreter* interp, XSINIT_t xsinit, int argc, char** argv, char** env)
1493 Found in file perl.c
1497 Tells a Perl interpreter to run. See L<perlembed>.
1499 int perl_run(PerlInterpreter* interp)
1502 Found in file perl.c
1506 C<PL_modglobal> is a general purpose, interpreter global HV for use by
1507 extensions that need to keep information on a per-interpreter basis.
1508 In a pinch, it can also be used as a symbol table for extensions
1509 to share data among each other. It is a good idea to use keys
1510 prefixed by the package name of the extension that owns the data.
1515 Found in file intrpvar.h
1519 A convenience variable which is typically used with C<SvPV> when one
1520 doesn't care about the length of the string. It is usually more efficient
1521 to either declare a local variable and use that instead or to use the
1522 C<SvPV_nolen> macro.
1527 Found in file thrdvar.h
1531 This is the C<false> SV. See C<PL_sv_yes>. Always refer to this as
1537 Found in file intrpvar.h
1541 This is the C<undef> SV. Always refer to this as C<&PL_sv_undef>.
1546 Found in file intrpvar.h
1550 This is the C<true> SV. See C<PL_sv_no>. Always refer to this as
1556 Found in file intrpvar.h
1560 Pops an integer off the stack.
1569 Pops a long off the stack.
1578 Pops a double off the stack.
1587 Pops a string off the stack. Deprecated. New code should provide
1588 a STRLEN n_a and use POPpx.
1597 Pops a string off the stack which must consist of bytes i.e. characters < 256.
1598 Requires a variable STRLEN n_a in scope.
1607 Pops a string off the stack.
1608 Requires a variable STRLEN n_a in scope.
1617 Pops an SV off the stack.
1626 Push an integer onto the stack. The stack must have room for this element.
1627 Handles 'set' magic. See C<XPUSHi>.
1636 Opening bracket for arguments on a callback. See C<PUTBACK> and
1646 Push a double onto the stack. The stack must have room for this element.
1647 Handles 'set' magic. See C<XPUSHn>.
1656 Push a string onto the stack. The stack must have room for this element.
1657 The C<len> indicates the length of the string. Handles 'set' magic. See
1660 void PUSHp(char* str, STRLEN len)
1667 Push an SV onto the stack. The stack must have room for this element.
1668 Does not handle 'set' magic. See C<XPUSHs>.
1677 Push an unsigned integer onto the stack. The stack must have room for this
1678 element. See C<XPUSHu>.
1687 Closing bracket for XSUB arguments. This is usually handled by C<xsubpp>.
1688 See C<PUSHMARK> and L<perlcall> for other uses.
1697 The XSUB-writer's interface to the C C<realloc> function.
1699 void Renew(void* ptr, int nitems, type)
1702 Found in file handy.h
1706 The XSUB-writer's interface to the C C<realloc> function, with
1709 void Renewc(void* ptr, int nitems, type, cast)
1712 Found in file handy.h
1716 Tells Perl to C<require> the file named by the string argument. It is
1717 analogous to the Perl code C<eval "require '$file'">. It's even
1718 implemented that way; consider using Perl_load_module instead.
1720 NOTE: the perl_ form of this function is deprecated.
1722 void require_pv(const char* pv)
1725 Found in file perl.c
1729 Variable which is setup by C<xsubpp> to hold the return value for an
1730 XSUB. This is always the proper type for the XSUB. See
1731 L<perlxs/"The RETVAL Variable">.
1736 Found in file XSUB.h
1740 The XSUB-writer's interface to the C C<free> function.
1742 void Safefree(void* ptr)
1745 Found in file handy.h
1749 Copy a string to a safe spot. This does not use an SV.
1751 char* savepv(const char* sv)
1754 Found in file util.c
1758 Copy a string to a safe spot. The C<len> indicates number of bytes to
1759 copy. This does not use an SV.
1761 char* savepvn(const char* sv, I32 len)
1764 Found in file util.c
1768 Opening bracket for temporaries on a callback. See C<FREETMPS> and
1774 Found in file scope.h
1778 Stack pointer. This is usually handled by C<xsubpp>. See C<dSP> and
1786 Refetch the stack pointer. Used after a callback. See L<perlcall>.
1795 Used to access elements on the XSUB's stack.
1800 Found in file XSUB.h
1804 Test two strings to see if they are equal. Returns true or false.
1806 bool strEQ(char* s1, char* s2)
1809 Found in file handy.h
1813 Test two strings to see if the first, C<s1>, is greater than or equal to
1814 the second, C<s2>. Returns true or false.
1816 bool strGE(char* s1, char* s2)
1819 Found in file handy.h
1823 Test two strings to see if the first, C<s1>, is greater than the second,
1824 C<s2>. Returns true or false.
1826 bool strGT(char* s1, char* s2)
1829 Found in file handy.h
1833 Test two strings to see if the first, C<s1>, is less than or equal to the
1834 second, C<s2>. Returns true or false.
1836 bool strLE(char* s1, char* s2)
1839 Found in file handy.h
1843 Test two strings to see if the first, C<s1>, is less than the second,
1844 C<s2>. Returns true or false.
1846 bool strLT(char* s1, char* s2)
1849 Found in file handy.h
1853 Test two strings to see if they are different. Returns true or
1856 bool strNE(char* s1, char* s2)
1859 Found in file handy.h
1863 Test two strings to see if they are equal. The C<len> parameter indicates
1864 the number of bytes to compare. Returns true or false. (A wrapper for
1867 bool strnEQ(char* s1, char* s2, STRLEN len)
1870 Found in file handy.h
1874 Test two strings to see if they are different. The C<len> parameter
1875 indicates the number of bytes to compare. Returns true or false. (A
1876 wrapper for C<strncmp>).
1878 bool strnNE(char* s1, char* s2, STRLEN len)
1881 Found in file handy.h
1885 This is an architecture-independent macro to copy one structure to another.
1887 void StructCopy(type src, type dest, type)
1890 Found in file handy.h
1894 Returns the length of the string which is in the SV. See C<SvLEN>.
1896 STRLEN SvCUR(SV* sv)
1903 Set the length of the string which is in the SV. See C<SvCUR>.
1905 void SvCUR_set(SV* sv, STRLEN len)
1912 Returns a pointer to the last character in the string which is in the SV.
1913 See C<SvCUR>. Access the character as *(SvEND(sv)).
1922 Invokes C<mg_get> on an SV if it has 'get' magic. This macro evaluates its
1923 argument more than once.
1925 void SvGETMAGIC(SV* sv)
1932 Expands the character buffer in the SV so that it has room for the
1933 indicated number of bytes (remember to reserve space for an extra trailing
1934 NUL character). Calls C<sv_grow> to perform the expansion if necessary.
1935 Returns a pointer to the character buffer.
1937 char * SvGROW(SV* sv, STRLEN len)
1944 Returns a boolean indicating whether the SV contains an integer.
1953 Returns a boolean indicating whether the SV contains an integer. Checks
1954 the B<private> setting. Use C<SvIOK>.
1963 Returns a boolean indicating whether the SV contains an signed integer.
1965 void SvIOK_notUV(SV* sv)
1972 Unsets the IV status of an SV.
1974 void SvIOK_off(SV* sv)
1981 Tells an SV that it is an integer.
1983 void SvIOK_on(SV* sv)
1990 Tells an SV that it is an integer and disables all other OK bits.
1992 void SvIOK_only(SV* sv)
1999 Tells and SV that it is an unsigned integer and disables all other OK bits.
2001 void SvIOK_only_UV(SV* sv)
2008 Returns a boolean indicating whether the SV contains an unsigned integer.
2010 void SvIOK_UV(SV* sv)
2017 Coerces the given SV to an integer and returns it.
2026 Returns the integer which is stored in the SV, assuming SvIOK is
2036 Returns the size of the string buffer in the SV, not including any part
2037 attributable to C<SvOOK>. See C<SvCUR>.
2039 STRLEN SvLEN(SV* sv)
2046 Returns a boolean indicating whether the SV contains a number, integer or
2056 Returns a boolean indicating whether the SV contains a number, integer or
2057 double. Checks the B<private> setting. Use C<SvNIOK>.
2059 bool SvNIOKp(SV* sv)
2066 Unsets the NV/IV status of an SV.
2068 void SvNIOK_off(SV* sv)
2075 Returns a boolean indicating whether the SV contains a double.
2084 Returns a boolean indicating whether the SV contains a double. Checks the
2085 B<private> setting. Use C<SvNOK>.
2094 Unsets the NV status of an SV.
2096 void SvNOK_off(SV* sv)
2103 Tells an SV that it is a double.
2105 void SvNOK_on(SV* sv)
2112 Tells an SV that it is a double and disables all other OK bits.
2114 void SvNOK_only(SV* sv)
2121 Coerce the given SV to a double and return it.
2130 Returns the double which is stored in the SV, assuming SvNOK is
2140 Returns a boolean indicating whether the value is an SV.
2149 Returns a boolean indicating whether the SvIVX is a valid offset value for
2150 the SvPVX. This hack is used internally to speed up removal of characters
2151 from the beginning of a SvPV. When SvOOK is true, then the start of the
2152 allocated string buffer is really (SvPVX - SvIVX).
2161 Returns a boolean indicating whether the SV contains a character
2171 Returns a boolean indicating whether the SV contains a character string.
2172 Checks the B<private> setting. Use C<SvPOK>.
2181 Unsets the PV status of an SV.
2183 void SvPOK_off(SV* sv)
2190 Tells an SV that it is a string.
2192 void SvPOK_on(SV* sv)
2199 Tells an SV that it is a string and disables all other OK bits.
2200 Will also turn off the UTF8 status.
2202 void SvPOK_only(SV* sv)
2207 =item SvPOK_only_UTF8
2209 Tells an SV that it is a string and disables all other OK bits,
2210 and leaves the UTF8 status as it was.
2212 void SvPOK_only_UTF8(SV* sv)
2219 Returns a pointer to the string in the SV, or a stringified form of the SV
2220 if the SV does not contain a string. Handles 'get' magic.
2222 char* SvPV(SV* sv, STRLEN len)
2229 Returns a pointer to the string in the SV. The SV must contain a
2239 Like <SvPV> but will force the SV into becoming a string (SvPOK). You want
2240 force if you are going to update the SvPVX directly.
2242 char* SvPV_force(SV* sv, STRLEN len)
2249 Returns a pointer to the string in the SV, or a stringified form of the SV
2250 if the SV does not contain a string. Handles 'get' magic.
2252 char* SvPV_nolen(SV* sv)
2259 Returns the value of the object's reference count.
2261 U32 SvREFCNT(SV* sv)
2268 Decrements the reference count of the given SV.
2270 void SvREFCNT_dec(SV* sv)
2277 Increments the reference count of the given SV.
2279 SV* SvREFCNT_inc(SV* sv)
2286 Tests if the SV is an RV.
2295 Unsets the RV status of an SV.
2297 void SvROK_off(SV* sv)
2304 Tells an SV that it is an RV.
2306 void SvROK_on(SV* sv)
2313 Dereferences an RV to return the SV.
2322 Invokes C<mg_set> on an SV if it has 'set' magic. This macro evaluates its
2323 argument more than once.
2325 void SvSETMAGIC(SV* sv)
2332 Calls C<sv_setsv> if dsv is not the same as ssv. May evaluate arguments
2335 void SvSetSV(SV* dsb, SV* ssv)
2340 =item SvSetSV_nosteal
2342 Calls a non-destructive version of C<sv_setsv> if dsv is not the same as
2343 ssv. May evaluate arguments more than once.
2345 void SvSetSV_nosteal(SV* dsv, SV* ssv)
2352 Returns the stash of the SV.
2361 Taints an SV if tainting is enabled
2363 void SvTAINT(SV* sv)
2370 Checks to see if an SV is tainted. Returns TRUE if it is, FALSE if
2373 bool SvTAINTED(SV* sv)
2380 Untaints an SV. Be I<very> careful with this routine, as it short-circuits
2381 some of Perl's fundamental security features. XS module authors should not
2382 use this function unless they fully understand all the implications of
2383 unconditionally untainting the value. Untainting should be done in the
2384 standard perl fashion, via a carefully crafted regexp, rather than directly
2385 untainting variables.
2387 void SvTAINTED_off(SV* sv)
2394 Marks an SV as tainted.
2396 void SvTAINTED_on(SV* sv)
2403 Returns a boolean indicating whether Perl would evaluate the SV as true or
2404 false, defined or undefined. Does not handle 'get' magic.
2413 Returns the type of the SV. See C<svtype>.
2415 svtype SvTYPE(SV* sv)
2422 An enum of flags for Perl types. These are found in the file B<sv.h>
2423 in the C<svtype> enum. Test these flags with the C<SvTYPE> macro.
2430 Integer type flag for scalars. See C<svtype>.
2437 Double type flag for scalars. See C<svtype>.
2444 Pointer type flag for scalars. See C<svtype>.
2451 Type flag for arrays. See C<svtype>.
2458 Type flag for code refs. See C<svtype>.
2465 Type flag for hashes. See C<svtype>.
2472 Type flag for blessed scalars. See C<svtype>.
2479 Returns a boolean indicating whether the SV contains an unsigned integer.
2488 Used to upgrade an SV to a more complex form. Uses C<sv_upgrade> to
2489 perform the upgrade if necessary. See C<svtype>.
2491 void SvUPGRADE(SV* sv, svtype type)
2498 Returns a boolean indicating whether the SV contains UTF-8 encoded data.
2507 Unsets the UTF8 status of an SV.
2509 void SvUTF8_off(SV *sv)
2516 Turn on the UTF8 status of an SV (the data is not changed, just the flag).
2517 Do not use frivolously.
2519 void SvUTF8_on(SV *sv)
2526 Coerces the given SV to an unsigned integer and returns it.
2535 Returns the unsigned integer which is stored in the SV, assuming SvIOK is
2545 Marks an SV as mortal. The SV will be destroyed when the current context
2548 SV* sv_2mortal(SV* sv)
2555 Blesses an SV into a specified package. The SV must be an RV. The package
2556 must be designated by its stash (see C<gv_stashpv()>). The reference count
2557 of the SV is unaffected.
2559 SV* sv_bless(SV* sv, HV* stash)
2566 Concatenates the string onto the end of the string which is in the SV.
2567 If the SV has the UTF8 status set, then the bytes appended should be
2568 valid UTF8. Handles 'get' magic, but not 'set' magic. See C<sv_catpv_mg>.
2570 void sv_catpv(SV* sv, const char* ptr)
2577 Processes its arguments like C<sprintf> and appends the formatted
2578 output to an SV. If the appended data contains "wide" characters
2579 (including, but not limited to, SVs with a UTF-8 PV formatted with %s,
2580 and characters >255 formatted with %c), the original SV might get
2581 upgraded to UTF-8. Handles 'get' magic, but not 'set' magic.
2582 C<SvSETMAGIC()> must typically be called after calling this function
2583 to handle 'set' magic.
2585 void sv_catpvf(SV* sv, const char* pat, ...)
2592 Like C<sv_catpvf>, but also handles 'set' magic.
2594 void sv_catpvf_mg(SV *sv, const char* pat, ...)
2601 Concatenates the string onto the end of the string which is in the SV. The
2602 C<len> indicates number of bytes to copy. If the SV has the UTF8
2603 status set, then the bytes appended should be valid UTF8.
2604 Handles 'get' magic, but not 'set' magic. See C<sv_catpvn_mg>.
2606 void sv_catpvn(SV* sv, const char* ptr, STRLEN len)
2613 Like C<sv_catpvn>, but also handles 'set' magic.
2615 void sv_catpvn_mg(SV *sv, const char *ptr, STRLEN len)
2622 Like C<sv_catpv>, but also handles 'set' magic.
2624 void sv_catpv_mg(SV *sv, const char *ptr)
2631 Concatenates the string from SV C<ssv> onto the end of the string in
2632 SV C<dsv>. Modifies C<dsv> but not C<ssv>. Handles 'get' magic, but
2633 not 'set' magic. See C<sv_catsv_mg>.
2635 void sv_catsv(SV* dsv, SV* ssv)
2642 Like C<sv_catsv>, but also handles 'set' magic.
2644 void sv_catsv_mg(SV *dstr, SV *sstr)
2651 Efficient removal of characters from the beginning of the string buffer.
2652 SvPOK(sv) must be true and the C<ptr> must be a pointer to somewhere inside
2653 the string buffer. The C<ptr> becomes the first character of the adjusted
2656 void sv_chop(SV* sv, char* ptr)
2663 Clear an SV, making it empty. Does not free the memory used by the SV
2666 void sv_clear(SV* sv)
2673 Compares the strings in two SVs. Returns -1, 0, or 1 indicating whether the
2674 string in C<sv1> is less than, equal to, or greater than the string in
2677 I32 sv_cmp(SV* sv1, SV* sv2)
2684 Compares the strings in two SVs in a locale-aware manner. See
2687 I32 sv_cmp_locale(SV* sv1, SV* sv2)
2694 Auto-decrement of the value in the SV.
2701 =item sv_derived_from
2703 Returns a boolean indicating whether the SV is derived from the specified
2704 class. This is the function that implements C<UNIVERSAL::isa>. It works
2705 for class names as well as for objects.
2707 bool sv_derived_from(SV* sv, const char* name)
2710 Found in file universal.c
2714 Returns a boolean indicating whether the strings in the two SVs are
2717 I32 sv_eq(SV* sv1, SV* sv2)
2724 Free the memory used by an SV.
2726 void sv_free(SV* sv)
2733 Get a line from the filehandle and store it into the SV, optionally
2734 appending to the currently-stored string.
2736 char* sv_gets(SV* sv, PerlIO* fp, I32 append)
2743 Expands the character buffer in the SV. This will use C<sv_unref> and will
2744 upgrade the SV to C<SVt_PV>. Returns a pointer to the character buffer.
2747 char* sv_grow(SV* sv, STRLEN newlen)
2754 Auto-increment of the value in the SV.
2763 Inserts a string at the specified offset/length within the SV. Similar to
2764 the Perl substr() function.
2766 void sv_insert(SV* bigsv, STRLEN offset, STRLEN len, char* little, STRLEN littlelen)
2773 Returns a boolean indicating whether the SV is blessed into the specified
2774 class. This does not check for subtypes; use C<sv_derived_from> to verify
2775 an inheritance relationship.
2777 int sv_isa(SV* sv, const char* name)
2784 Returns a boolean indicating whether the SV is an RV pointing to a blessed
2785 object. If the SV is not an RV, or if the object is not blessed, then this
2788 int sv_isobject(SV* sv)
2795 Returns the length of the string in the SV. See also C<SvCUR>.
2797 STRLEN sv_len(SV* sv)
2804 Returns the number of characters in the string in an SV, counting wide
2805 UTF8 bytes as a single character.
2807 STRLEN sv_len_utf8(SV* sv)
2814 Adds magic to an SV.
2816 void sv_magic(SV* sv, SV* obj, int how, const char* name, I32 namlen)
2823 Creates a new SV which is a copy of the original SV. The new SV is marked
2826 SV* sv_mortalcopy(SV* oldsv)
2833 Creates a new SV which is mortal. The reference count of the SV is set to 1.
2842 Get a sensible string out of the SV somehow.
2844 char* sv_pvn_force(SV* sv, STRLEN* lp)
2849 =item sv_pvutf8n_force
2851 Get a sensible UTF8-encoded string out of the SV somehow. See
2854 char* sv_pvutf8n_force(SV* sv, STRLEN* lp)
2861 Returns a string describing what the SV is a reference to.
2863 char* sv_reftype(SV* sv, int ob)
2870 Make the first argument a copy of the second, then delete the original.
2872 void sv_replace(SV* sv, SV* nsv)
2881 SV* sv_rvweaken(SV *sv)
2888 Copies an integer into the given SV. Does not handle 'set' magic. See
2891 void sv_setiv(SV* sv, IV num)
2898 Like C<sv_setiv>, but also handles 'set' magic.
2900 void sv_setiv_mg(SV *sv, IV i)
2907 Copies a double into the given SV. Does not handle 'set' magic. See
2910 void sv_setnv(SV* sv, NV num)
2917 Like C<sv_setnv>, but also handles 'set' magic.
2919 void sv_setnv_mg(SV *sv, NV num)
2926 Copies a string into an SV. The string must be null-terminated. Does not
2927 handle 'set' magic. See C<sv_setpv_mg>.
2929 void sv_setpv(SV* sv, const char* ptr)
2936 Processes its arguments like C<sprintf> and sets an SV to the formatted
2937 output. Does not handle 'set' magic. See C<sv_setpvf_mg>.
2939 void sv_setpvf(SV* sv, const char* pat, ...)
2946 Like C<sv_setpvf>, but also handles 'set' magic.
2948 void sv_setpvf_mg(SV *sv, const char* pat, ...)
2955 Copies an integer into the given SV, also updating its string value.
2956 Does not handle 'set' magic. See C<sv_setpviv_mg>.
2958 void sv_setpviv(SV* sv, IV num)
2965 Like C<sv_setpviv>, but also handles 'set' magic.
2967 void sv_setpviv_mg(SV *sv, IV iv)
2974 Copies a string into an SV. The C<len> parameter indicates the number of
2975 bytes to be copied. Does not handle 'set' magic. See C<sv_setpvn_mg>.
2977 void sv_setpvn(SV* sv, const char* ptr, STRLEN len)
2984 Like C<sv_setpvn>, but also handles 'set' magic.
2986 void sv_setpvn_mg(SV *sv, const char *ptr, STRLEN len)
2993 Like C<sv_setpv>, but also handles 'set' magic.
2995 void sv_setpv_mg(SV *sv, const char *ptr)
3002 Copies an integer into a new SV, optionally blessing the SV. The C<rv>
3003 argument will be upgraded to an RV. That RV will be modified to point to
3004 the new SV. The C<classname> argument indicates the package for the
3005 blessing. Set C<classname> to C<Nullch> to avoid the blessing. The new SV
3006 will be returned and will have a reference count of 1.
3008 SV* sv_setref_iv(SV* rv, const char* classname, IV iv)
3015 Copies a double into a new SV, optionally blessing the SV. The C<rv>
3016 argument will be upgraded to an RV. That RV will be modified to point to
3017 the new SV. The C<classname> argument indicates the package for the
3018 blessing. Set C<classname> to C<Nullch> to avoid the blessing. The new SV
3019 will be returned and will have a reference count of 1.
3021 SV* sv_setref_nv(SV* rv, const char* classname, NV nv)
3028 Copies a pointer into a new SV, optionally blessing the SV. The C<rv>
3029 argument will be upgraded to an RV. That RV will be modified to point to
3030 the new SV. If the C<pv> argument is NULL then C<PL_sv_undef> will be placed
3031 into the SV. The C<classname> argument indicates the package for the
3032 blessing. Set C<classname> to C<Nullch> to avoid the blessing. The new SV
3033 will be returned and will have a reference count of 1.
3035 Do not use with other Perl types such as HV, AV, SV, CV, because those
3036 objects will become corrupted by the pointer copy process.
3038 Note that C<sv_setref_pvn> copies the string while this copies the pointer.
3040 SV* sv_setref_pv(SV* rv, const char* classname, void* pv)
3047 Copies a string into a new SV, optionally blessing the SV. The length of the
3048 string must be specified with C<n>. The C<rv> argument will be upgraded to
3049 an RV. That RV will be modified to point to the new SV. The C<classname>
3050 argument indicates the package for the blessing. Set C<classname> to
3051 C<Nullch> to avoid the blessing. The new SV will be returned and will have
3052 a reference count of 1.
3054 Note that C<sv_setref_pv> copies the pointer while this copies the string.
3056 SV* sv_setref_pvn(SV* rv, const char* classname, char* pv, STRLEN n)
3063 Copies an unsigned integer into a new SV, optionally blessing the SV. The C<rv>
3064 argument will be upgraded to an RV. That RV will be modified to point to
3065 the new SV. The C<classname> argument indicates the package for the
3066 blessing. Set C<classname> to C<Nullch> to avoid the blessing. The new SV
3067 will be returned and will have a reference count of 1.
3069 SV* sv_setref_uv(SV* rv, const char* classname, UV uv)
3076 Copies the contents of the source SV C<ssv> into the destination SV C<dsv>.
3077 The source SV may be destroyed if it is mortal. Does not handle 'set'
3078 magic. See the macro forms C<SvSetSV>, C<SvSetSV_nosteal> and
3081 void sv_setsv(SV* dsv, SV* ssv)
3088 Like C<sv_setsv>, but also handles 'set' magic.
3090 void sv_setsv_mg(SV *dstr, SV *sstr)
3097 Copies an unsigned integer into the given SV. Does not handle 'set' magic.
3100 void sv_setuv(SV* sv, UV num)
3107 Like C<sv_setuv>, but also handles 'set' magic.
3109 void sv_setuv_mg(SV *sv, UV u)
3116 Returns true if the SV has a true value by Perl's rules.
3125 Removes magic from an SV.
3127 int sv_unmagic(SV* sv, int type)
3134 Unsets the RV status of the SV, and decrements the reference count of
3135 whatever was being referenced by the RV. This can almost be thought of
3136 as a reversal of C<newSVrv>. This is C<sv_unref_flags> with the C<flag>
3137 being zero. See C<SvROK_off>.
3139 void sv_unref(SV* sv)
3144 =item sv_unref_flags
3146 Unsets the RV status of the SV, and decrements the reference count of
3147 whatever was being referenced by the RV. This can almost be thought of
3148 as a reversal of C<newSVrv>. The C<cflags> argument can contain
3149 C<SV_IMMEDIATE_UNREF> to force the reference count to be decremented
3150 (otherwise the decrementing is conditional on the reference count being
3151 different from one or the reference being a readonly SV).
3154 void sv_unref_flags(SV* sv, U32 flags)
3161 Upgrade an SV to a more complex form. Use C<SvUPGRADE>. See
3164 bool sv_upgrade(SV* sv, U32 mt)
3171 Tells an SV to use C<ptr> to find its string value. Normally the string is
3172 stored inside the SV but sv_usepvn allows the SV to use an outside string.
3173 The C<ptr> should point to memory that was allocated by C<malloc>. The
3174 string length, C<len>, must be supplied. This function will realloc the
3175 memory pointed to by C<ptr>, so that pointer should not be freed or used by
3176 the programmer after giving it to sv_usepvn. Does not handle 'set' magic.
3177 See C<sv_usepvn_mg>.
3179 void sv_usepvn(SV* sv, char* ptr, STRLEN len)
3186 Like C<sv_usepvn>, but also handles 'set' magic.
3188 void sv_usepvn_mg(SV *sv, char *ptr, STRLEN len)
3193 =item sv_utf8_decode
3195 Convert the octets in the PV from UTF-8 to chars. Scan for validity and then
3196 turn of SvUTF8 if needed so that we see characters. Used as a building block
3197 for decode_utf8 in Encode.xs
3199 NOTE: this function is experimental and may change or be
3200 removed without notice.
3202 bool sv_utf8_decode(SV *sv)
3207 =item sv_utf8_downgrade
3209 Attempt to convert the PV of an SV from UTF8-encoded to byte encoding.
3210 This may not be possible if the PV contains non-byte encoding characters;
3211 if this is the case, either returns false or, if C<fail_ok> is not
3214 NOTE: this function is experimental and may change or be
3215 removed without notice.
3217 bool sv_utf8_downgrade(SV *sv, bool fail_ok)
3222 =item sv_utf8_encode
3224 Convert the PV of an SV to UTF8-encoded, but then turn off the C<SvUTF8>
3225 flag so that it looks like octets again. Used as a building block
3226 for encode_utf8 in Encode.xs
3228 void sv_utf8_encode(SV *sv)
3233 =item sv_utf8_upgrade
3235 Convert the PV of an SV to its UTF8-encoded form.
3236 Forces the SV to string form it it is not already.
3237 Always sets the SvUTF8 flag to avoid future validity checks even
3238 if all the bytes have hibit clear.
3240 STRLEN sv_utf8_upgrade(SV *sv)
3247 Processes its arguments like C<vsprintf> and appends the formatted output
3248 to an SV. Uses an array of SVs if the C style variable argument list is
3249 missing (NULL). When running with taint checks enabled, indicates via
3250 C<maybe_tainted> if results are untrustworthy (often due to the use of
3253 void sv_vcatpvfn(SV* sv, const char* pat, STRLEN patlen, va_list* args, SV** svargs, I32 svmax, bool *maybe_tainted)
3260 Works like C<vcatpvfn> but copies the text into the SV instead of
3263 void sv_vsetpvfn(SV* sv, const char* pat, STRLEN patlen, va_list* args, SV** svargs, I32 svmax, bool *maybe_tainted)
3270 Variable which is setup by C<xsubpp> to designate the object in a C++
3271 XSUB. This is always the proper type for the C++ object. See C<CLASS> and
3272 L<perlxs/"Using XS With C++">.
3277 Found in file XSUB.h
3281 Converts the specified character to lowercase.
3283 char toLOWER(char ch)
3286 Found in file handy.h
3290 Converts the specified character to uppercase.
3292 char toUPPER(char ch)
3295 Found in file handy.h
3297 =item utf8n_to_uvchr
3299 Returns the native character value of the first character in the string C<s>
3300 which is assumed to be in UTF8 encoding; C<retlen> will be set to the
3301 length, in bytes, of that character.
3303 Allows length and flags to be passed to low level routine.
3305 UV utf8n_to_uvchr(U8 *s, STRLEN curlen, STRLEN* retlen, U32 flags)
3308 Found in file utf8.c
3310 =item utf8n_to_uvuni
3312 Bottom level UTF-8 decode routine.
3313 Returns the unicode code point value of the first character in the string C<s>
3314 which is assumed to be in UTF8 encoding and no longer than C<curlen>;
3315 C<retlen> will be set to the length, in bytes, of that character.
3317 If C<s> does not point to a well-formed UTF8 character, the behaviour
3318 is dependent on the value of C<flags>: if it contains UTF8_CHECK_ONLY,
3319 it is assumed that the caller will raise a warning, and this function
3320 will silently just set C<retlen> to C<-1> and return zero. If the
3321 C<flags> does not contain UTF8_CHECK_ONLY, warnings about
3322 malformations will be given, C<retlen> will be set to the expected
3323 length of the UTF-8 character in bytes, and zero will be returned.
3325 The C<flags> can also contain various flags to allow deviations from
3326 the strict UTF-8 encoding (see F<utf8.h>).
3328 Most code should use utf8_to_uvchr() rather than call this directly.
3330 UV utf8n_to_uvuni(U8 *s, STRLEN curlen, STRLEN* retlen, U32 flags)
3333 Found in file utf8.c
3337 Returns the number of UTF8 characters between the UTF-8 pointers C<a>
3340 WARNING: use only if you *know* that the pointers point inside the
3343 IV utf8_distance(U8 *a, U8 *b)
3346 Found in file utf8.c
3350 Return the UTF-8 pointer C<s> displaced by C<off> characters, either
3351 forward or backward.
3353 WARNING: do not use the following unless you *know* C<off> is within
3354 the UTF-8 data pointed to by C<s> *and* that on entry C<s> is aligned
3355 on the first byte of character or just after the last byte of a character.
3357 U8* utf8_hop(U8 *s, I32 off)
3360 Found in file utf8.c
3364 Return the length of the UTF-8 char encoded string C<s> in characters.
3365 Stops at C<e> (inclusive). If C<e E<lt> s> or if the scan would end
3366 up past C<e>, croaks.
3368 STRLEN utf8_length(U8* s, U8 *e)
3371 Found in file utf8.c
3375 Converts a string C<s> of length C<len> from UTF8 into byte encoding.
3376 Unlike C<bytes_to_utf8>, this over-writes the original string, and
3377 updates len to contain the new length.
3378 Returns zero on failure, setting C<len> to -1.
3380 NOTE: this function is experimental and may change or be
3381 removed without notice.
3383 U8* utf8_to_bytes(U8 *s, STRLEN *len)
3386 Found in file utf8.c
3390 Returns the native character value of the first character in the string C<s>
3391 which is assumed to be in UTF8 encoding; C<retlen> will be set to the
3392 length, in bytes, of that character.
3394 If C<s> does not point to a well-formed UTF8 character, zero is
3395 returned and retlen is set, if possible, to -1.
3397 UV utf8_to_uvchr(U8 *s, STRLEN* retlen)
3400 Found in file utf8.c
3404 Returns the Unicode code point of the first character in the string C<s>
3405 which is assumed to be in UTF8 encoding; C<retlen> will be set to the
3406 length, in bytes, of that character.
3408 This function should only be used when returned UV is considered
3409 an index into the Unicode semantic tables (e.g. swashes).
3411 If C<s> does not point to a well-formed UTF8 character, zero is
3412 returned and retlen is set, if possible, to -1.
3414 UV utf8_to_uvuni(U8 *s, STRLEN* retlen)
3417 Found in file utf8.c
3421 Adds the UTF8 representation of the Native codepoint C<uv> to the end
3422 of the string C<d>; C<d> should be have at least C<UTF8_MAXLEN+1> free
3423 bytes available. The return value is the pointer to the byte after the
3424 end of the new character. In other words,
3426 d = uvchr_to_utf8(d, uv);
3428 is the recommended wide native character-aware way of saying
3432 U8* uvchr_to_utf8(U8 *d, UV uv)
3435 Found in file utf8.c
3439 Adds the UTF8 representation of the Unicode codepoint C<uv> to the end
3440 of the string C<d>; C<d> should be have at least C<UTF8_MAXLEN+1> free
3441 bytes available. The return value is the pointer to the byte after the
3442 end of the new character. In other words,
3444 d = uvuni_to_utf8(d, uv);
3446 is the recommended Unicode-aware way of saying
3450 U8* uvuni_to_utf8(U8 *d, UV uv)
3453 Found in file utf8.c
3457 This is the XSUB-writer's interface to Perl's C<warn> function. Use this
3458 function the same way you use the C C<printf> function. See
3461 void warn(const char* pat, ...)
3464 Found in file util.c
3468 Push an integer onto the stack, extending the stack if necessary. Handles
3469 'set' magic. See C<PUSHi>.
3478 Push a double onto the stack, extending the stack if necessary. Handles
3479 'set' magic. See C<PUSHn>.
3488 Push a string onto the stack, extending the stack if necessary. The C<len>
3489 indicates the length of the string. Handles 'set' magic. See
3492 void XPUSHp(char* str, STRLEN len)
3499 Push an SV onto the stack, extending the stack if necessary. Does not
3500 handle 'set' magic. See C<PUSHs>.
3509 Push an unsigned integer onto the stack, extending the stack if necessary.
3519 Macro to declare an XSUB and its C parameter list. This is handled by
3523 Found in file XSUB.h
3527 Return from XSUB, indicating number of items on the stack. This is usually
3528 handled by C<xsubpp>.
3530 void XSRETURN(int nitems)
3533 Found in file XSUB.h
3535 =item XSRETURN_EMPTY
3537 Return an empty list from an XSUB immediately.
3542 Found in file XSUB.h
3546 Return an integer from an XSUB immediately. Uses C<XST_mIV>.
3548 void XSRETURN_IV(IV iv)
3551 Found in file XSUB.h
3555 Return C<&PL_sv_no> from an XSUB immediately. Uses C<XST_mNO>.
3560 Found in file XSUB.h
3564 Return an double from an XSUB immediately. Uses C<XST_mNV>.
3566 void XSRETURN_NV(NV nv)
3569 Found in file XSUB.h
3573 Return a copy of a string from an XSUB immediately. Uses C<XST_mPV>.
3575 void XSRETURN_PV(char* str)
3578 Found in file XSUB.h
3580 =item XSRETURN_UNDEF
3582 Return C<&PL_sv_undef> from an XSUB immediately. Uses C<XST_mUNDEF>.
3587 Found in file XSUB.h
3591 Return C<&PL_sv_yes> from an XSUB immediately. Uses C<XST_mYES>.
3596 Found in file XSUB.h
3600 Place an integer into the specified position C<pos> on the stack. The
3601 value is stored in a new mortal SV.
3603 void XST_mIV(int pos, IV iv)
3606 Found in file XSUB.h
3610 Place C<&PL_sv_no> into the specified position C<pos> on the
3613 void XST_mNO(int pos)
3616 Found in file XSUB.h
3620 Place a double into the specified position C<pos> on the stack. The value
3621 is stored in a new mortal SV.
3623 void XST_mNV(int pos, NV nv)
3626 Found in file XSUB.h
3630 Place a copy of a string into the specified position C<pos> on the stack.
3631 The value is stored in a new mortal SV.
3633 void XST_mPV(int pos, char* str)
3636 Found in file XSUB.h
3640 Place C<&PL_sv_undef> into the specified position C<pos> on the
3643 void XST_mUNDEF(int pos)
3646 Found in file XSUB.h
3650 Place C<&PL_sv_yes> into the specified position C<pos> on the
3653 void XST_mYES(int pos)
3656 Found in file XSUB.h
3660 The version identifier for an XS module. This is usually
3661 handled automatically by C<ExtUtils::MakeMaker>. See C<XS_VERSION_BOOTCHECK>.
3664 Found in file XSUB.h
3666 =item XS_VERSION_BOOTCHECK
3668 Macro to verify that a PM module's $VERSION variable matches the XS
3669 module's C<XS_VERSION> variable. This is usually handled automatically by
3670 C<xsubpp>. See L<perlxs/"The VERSIONCHECK: Keyword">.
3672 XS_VERSION_BOOTCHECK;
3675 Found in file XSUB.h
3679 The XSUB-writer's interface to the C C<memzero> function. The C<dest> is the
3680 destination, C<nitems> is the number of items, and C<type> is the type.
3682 void Zero(void* dest, int nitems, type)
3685 Found in file handy.h
3691 Until May 1997, this document was maintained by Jeff Okamoto
3692 <okamoto@corp.hp.com>. It is now maintained as part of Perl itself.
3694 With lots of help and suggestions from Dean Roehrich, Malcolm Beattie,
3695 Andreas Koenig, Paul Hudson, Ilya Zakharevich, Paul Marquess, Neil
3696 Bowers, Matthew Green, Tim Bunce, Spider Boardman, Ulrich Pfeifer,
3697 Stephen McCamant, and Gurusamy Sarathy.
3699 API Listing originally by Dean Roehrich <roehrich@cray.com>.
3701 Updated to be autogenerated from comments in the source by Benjamin Stuhl.
3705 perlguts(1), perlxs(1), perlxstut(1), perlintern(1)