1 /* This file (config_H) is a sample config.h file. If you are unable
2 to successfully run Configure, copy this file to config.h and
3 edit it to suit your system.
6 * This file was produced by running the config_h.SH script, which
7 * gets its values from config.sh, which is generally produced by
10 * Feel free to modify any of this as the need arises. Note, however,
11 * that running config_h.SH again will wipe out any changes you've made.
12 * For a more permanent change edit config.sh and rerun config_h.SH.
14 * $Id: Config_h.U,v 3.0.1.4 1995/09/25 09:10:49 ram Exp $
17 /* Configuration time: Thu Feb 8 17:15:11 EST 1996
18 * Configured by: doughera
19 * Target system: sunos fractal 5.4 generic_101946-29 i86pc i386
26 * This macro catenates 2 tokens together.
29 #define CAT2(a,b)a ## b
30 #define CAT3(a,b,c)a ## b ## c
31 #define CAT4(a,b,c,d)a ## b ## c ## d
32 #define CAT5(a,b,c,d,e)a ## b ## c ## d ## e
34 #define STRINGIFY(a)StGiFy(a)
35 #define SCAT2(a,b)StGiFy(a) StGiFy(b)
36 #define SCAT3(a,b,c)StGiFy(a) StGiFy(b) StGiFy(c)
37 #define SCAT4(a,b,c,d)StGiFy(a) StGiFy(b) StGiFy(c) StGiFy(d)
38 #define SCAT5(a,b,c,d,e)StGiFy(a) StGiFy(b) StGiFy(c) StGiFy(d) StGiFy(e)
43 * This symbol contains the number of bytes required to align a
44 * double. Usual values are 2, 4 and 8.
46 #define MEM_ALIGNBYTES 8 /* config-skip */
49 * This symbol holds the path of the bin directory where the package will
50 * be installed. Program must be prepared to deal with ~name substitution.
52 #define BIN "/_P9P_OBJTYPE/bin" /* */
55 * This symbol contains the first part of the string which will invoke
56 * the C preprocessor on the standard input and produce to standard
57 * output. Typical value of "cc -E" or "/lib/cpp", but it can also
58 * call a wrapper. See CPPRUN.
61 * This symbol contains the second part of the string which will invoke
62 * the C preprocessor on the standard input and produce to standard
63 * output. This symbol will have the value "-" if CPPSTDIN needs a minus
64 * to specify standard input, otherwise the value is "".
66 #define CPPSTDIN "cpp"
70 * This symbol, if defined, indicates that the alarm routine is
73 #define HAS_ALARM /**/
76 * This symbol indicates the C compiler can check for function attributes,
77 * such as printf formats. This is normally only supported by GNU cc.
79 #undef HASATTRIBUTE /* config-skip*/
81 #define __attribute__(_arg_)
85 * This symbol is defined if the bcmp() routine is available to
86 * compare blocks of memory.
91 * This symbol is defined if the bcopy() routine is available to
92 * copy blocks of memory.
94 #define HAS_BCOPY /**/
97 * This symbol is defined if the bzero() routine is available to
98 * set a memory block to 0.
100 #define HAS_BZERO /**/
103 * This symbol is defined if the C compiler can cast negative
104 * or large floating point numbers to 32-bit ints.
109 * This symbol is defined if the C compiler can cast negative
110 * numbers to unsigned longs, ints and shorts.
113 * This symbol contains flags that say what difficulties the compiler
114 * has casting odd floating values to unsigned long:
116 * 1 = couldn't cast < 0
117 * 2 = couldn't cast >= 0x80000000
118 * 4 = couldn't cast in argument expression list
120 #undef CASTNEGFLOAT /**/
121 #if _P9P_OBJTYPE == 386
122 # define CASTFLAGS 3 /**/ /* config-skip */
124 # define CASTFLAGS 0 /**/ /* config-skip */
128 * This symbol, if defined, indicates that the chown routine is
131 #undef HAS_CHOWN /**/
134 * This symbol, if defined, indicates that the chroot routine is
137 #undef HAS_CHROOT /**/
140 * This symbol, if defined, indicates that the chsize routine is available
141 * to truncate files. You might need a -lx to get this routine.
143 #undef HAS_CHSIZE /**/
146 * This symbol, if defined, indicates that the closedir() routine
147 * does not return a value.
149 #define VOID_CLOSEDIR /**/
152 * This symbol, if defined, indicates that this C compiler knows about
153 * the const type. There is no need to actually test for that symbol
154 * within your programs. The mere use of the "const" keyword will
155 * trigger the necessary tests.
157 #define HASCONST /**/
160 * This symbol, if defined, indicates that the crypt routine is available
161 * to encrypt passwords and the like.
163 /* #define HAS_CRYPT /**/
166 * This symbol, if defined, indicates that the cuserid routine is
167 * available to get character login names.
169 #define HAS_CUSERID /**/
172 * This symbol, if defined, indicates that this system's <float.h>
173 * or <limits.h> defines the symbol DBL_DIG, which is the number
174 * of significant digits in a double precision number. If this
175 * symbol is not defined, a guess of 15 is usually pretty good.
177 #undef HAS_DBL_DIG /* */
180 * This symbol, if defined, indicates that the difftime routine is
183 #define HAS_DIFFTIME /**/
186 * This symbol, if defined, indicates that the dlerror routine is
187 * available to return a string describing the last error that
188 * occurred from a call to dlopen(), dlclose() or dlsym().
190 #undef HAS_DLERROR /**/
193 * This symbol, if defined, indicates that the dup2 routine is
194 * available to duplicate file descriptors.
196 #define HAS_DUP2 /**/
199 * This symbol, if defined, indicates that the fchmod routine is available
200 * to change mode of opened files. If unavailable, use chmod().
202 #undef HAS_FCHMOD /**/
205 * This symbol, if defined, indicates that the fchown routine is available
206 * to change ownership of opened files. If unavailable, use chown().
208 #undef HAS_FCHOWN /**/
211 * This symbol, if defined, indicates to the C program that
212 * the fcntl() function exists.
214 #define HAS_FCNTL /**/
217 * This symbol, if defined, indicates that the fgetpos routine is
218 * available to get the file position indicator, similar to ftell().
220 #define HAS_FGETPOS /**/
223 * This symbol, if defined, indicates that the system supports filenames
224 * longer than 14 characters.
226 #define FLEXFILENAMES /**/
229 * This symbol, if defined, indicates that the flock routine is
230 * available to do file locking.
232 #undef HAS_FLOCK /**/
235 * This symbol, if defined, indicates that the fork routine is
238 #define HAS_FORK /**/
241 * This symbol, if defined, indicates that the fsetpos routine is
242 * available to set the file position indicator, similar to fseek().
244 #define HAS_FSETPOS /**/
247 * This symbol, if defined, indicates that the getgroups() routine is
248 * available to get the list of process groups. If unavailable, multiple
249 * groups are probably not supported.
251 #undef HAS_GETGROUPS /* config-skip */
254 * This symbol, if defined, indicates that the gethostent routine is
255 * available to lookup host names in some data base or other.
257 #undef HAS_GETHOSTENT /* config-skip */
260 * This symbol, if defined, indicates that the C program may use the
261 * uname() routine to derive the host name. See also HAS_GETHOSTNAME
264 #undef HAS_UNAME /**/
267 * This symbol, if defined, indicates that the getlogin routine is
268 * available to get the login name.
270 #define HAS_GETLOGIN /**/
273 * This symbol, if defined, indicates that the getpgrp routine is
274 * available to get the current process group.
277 * This symbol, if defined, indicates that getpgrp needs one
278 * arguments whereas USG one needs none.
280 #define HAS_GETPGRP /**/
281 #undef USE_BSD_GETPGRP /**/
284 * This symbol, if defined, indicates that the getpgrp2() (as in DG/UX)
285 * routine is available to get the current process group.
287 #undef HAS_GETPGRP2 /**/
290 * This symbol, if defined, indicates that the getppid routine is
291 * available to get the parent process ID.
293 #define HAS_GETPPID /**/
296 * This symbol, if defined, indicates that the getpriority routine is
297 * available to get a process's priority.
299 #undef HAS_GETPRIORITY /**/
302 * This symbol, if defined, indicates that the htonl() routine (and
303 * friends htons() ntohl() ntohs()) are available to do network
304 * order byte swapping.
307 * This symbol, if defined, indicates that the htons() routine (and
308 * friends htonl() ntohl() ntohs()) are available to do network
309 * order byte swapping.
312 * This symbol, if defined, indicates that the ntohl() routine (and
313 * friends htonl() htons() ntohs()) are available to do network
314 * order byte swapping.
317 * This symbol, if defined, indicates that the ntohs() routine (and
318 * friends htonl() htons() ntohl()) are available to do network
319 * order byte swapping.
321 #define HAS_HTONL /**/
323 #define HAS_HTONS /**/
325 #define HAS_NTOHL /**/
327 #define HAS_NTOHS /**/
330 * This manifest constant lets the C program know that isascii
333 #undef HAS_ISASCII /**/
336 * This symbol, if defined, indicates that the killpg routine is available
337 * to kill process groups. If unavailable, you probably should use kill
338 * with a negative process number.
340 #undef HAS_KILLPG /**/
343 * This symbol, if defined, indicates that the link routine is
344 * available to create hard links.
346 #define HAS_LINK /**/
349 * This symbol, if defined, indicates that the localeconv routine is
350 * available for numeric and monetary formatting conventions.
352 #define HAS_LOCALECONV /**/
355 * This symbol, if defined, indicates that the lockf routine is
356 * available to do file locking.
358 #undef HAS_LOCKF /**/
361 * This symbol, if defined, indicates that the lstat routine is
362 * available to do file stats on symbolic links.
364 #define HAS_LSTAT /**/
367 * This symbol, if defined, indicates that the mblen routine is available
368 * to find the number of bytes in a multibye character.
370 #define HAS_MBLEN /**/
373 * This symbol, if defined, indicates that the mbstowcs routine is
374 * available to covert a multibyte string into a wide character string.
376 #define HAS_MBSTOWCS /**/
379 * This symbol, if defined, indicates that the mbtowc routine is available
380 * to covert a multibyte to a wide character.
382 #define HAS_MBTOWC /**/
385 * This symbol, if defined, indicates that the memcmp routine is available
386 * to compare blocks of memory.
388 #define HAS_MEMCMP /**/
391 * This symbol, if defined, indicates that the memcpy routine is available
392 * to copy blocks of memory.
394 #define HAS_MEMCPY /**/
397 * This symbol, if defined, indicates that the memmove routine is available
398 * to copy potentially overlapping blocks of memory. This should be used
399 * only when HAS_SAFE_BCOPY is not defined. If neither is there, roll your
402 #define HAS_MEMMOVE /**/
405 * This symbol, if defined, indicates that the memset routine is available
406 * to set blocks of memory.
408 #define HAS_MEMSET /**/
411 * This symbol, if defined, indicates that the mkdir routine is available
412 * to create directories. Otherwise you should fork off a new process to
415 #define HAS_MKDIR /**/
418 * This symbol, if defined, indicates that the mkfifo routine is
419 * available to create FIFOs. Otherwise, mknod should be able to
420 * do it for you. However, if mkfifo is there, mknod might require
421 * super-user privileges which mkfifo will not.
423 #define HAS_MKFIFO /**/
426 * This symbol, if defined, indicates that the mktime routine is
429 #define HAS_MKTIME /**/
432 * This symbol, if defined, indicates that the entire msg*(2) library is
433 * supported (IPC mechanism based on message queues).
438 * This symbol, if defined, indicates that the nice routine is
444 * This manifest constant lets the C program know that the three
445 * argument form of open(2) is available.
447 #define HAS_OPEN3 /**/
450 * This symbol, if defined, indicates that pathconf() is available
451 * to determine file-system related limits and options associated
452 * with a given filename.
455 * This symbol, if defined, indicates that pathconf() is available
456 * to determine file-system related limits and options associated
457 * with a given open file descriptor.
459 #define HAS_PATHCONF /**/
460 #define HAS_FPATHCONF /**/
463 * This symbol, if defined, indicates that the pause routine is
464 * available to suspend a process until a signal is received.
466 #define HAS_PAUSE /**/
469 * This symbol, if defined, indicates that the pipe routine is
470 * available to create an inter-process channel.
472 #define HAS_PIPE /**/
475 * This symbol, if defined, indicates that the poll routine is
476 * available to poll active file descriptors.
481 * This symbol, if defined, indicates that the readdir routine is
482 * available to read directory entries. You may have to include
483 * <dirent.h>. See I_DIRENT.
485 #define HAS_READDIR /**/
488 * This symbol, if defined, indicates that the seekdir routine is
489 * available. You may have to include <dirent.h>. See I_DIRENT.
491 #undef HAS_SEEKDIR /**/
494 * This symbol, if defined, indicates that the telldir routine is
495 * available. You may have to include <dirent.h>. See I_DIRENT.
497 #undef HAS_TELLDIR /**/
500 * This symbol, if defined, indicates that the rewinddir routine is
501 * available. You may have to include <dirent.h>. See I_DIRENT.
503 #define HAS_REWINDDIR /**/
506 * This symbol, if defined, indicates that the readlink routine is
507 * available to read the value of a symbolic link.
509 #define HAS_READLINK /**/
512 * This symbol, if defined, indicates that the rename routine is available
513 * to rename files. Otherwise you should do the unlink(), link(), unlink()
516 #define HAS_RENAME /**/
519 * This symbol, if defined, indicates that the rmdir routine is
520 * available to remove directories. Otherwise you should fork off a
521 * new process to exec /bin/rmdir.
523 #define HAS_RMDIR /**/
526 * This symbol, if defined, indicates that the bcopy routine is available
527 * to copy potentially overlapping memory blocks. Otherwise you should
528 * probably use memmove() or memcpy(). If neither is defined, roll your
531 #undef HAS_SAFE_BCOPY /**/
534 * This symbol, if defined, indicates that the memcpy routine is available
535 * to copy potentially overlapping memory blocks. Otherwise you should
536 * probably use memmove() or memcpy(). If neither is defined, roll your
539 #undef HAS_SAFE_MEMCPY /**/
542 * This symbol, if defined, indicates that the select routine is
543 * available to select active file descriptors. If the timeout field
544 * is used, <sys/time.h> may need to be included.
546 #define HAS_SELECT /* config-skip */
549 * This symbol, if defined, indicates that the entire sem*(2) library is
555 * This symbol, if defined, indicates that the setegid routine is available
556 * to change the effective gid of the current program.
558 #undef HAS_SETEGID /**/
561 * This symbol, if defined, indicates that the seteuid routine is available
562 * to change the effective uid of the current program.
564 #undef HAS_SETEUID /**/
567 * This symbol, if defined, indicates that the setlinebuf routine is
568 * available to change stderr or stdout from block-buffered or unbuffered
569 * to a line-buffered mode.
571 #undef HAS_SETLINEBUF /**/
574 * This symbol, if defined, indicates that the setlocale routine is
575 * available to handle locale-specific ctype implementations.
577 #define HAS_SETLOCALE /**/
580 * This symbol, if defined, indicates that the setpgid routine is
581 * available to set process group ID.
583 #define HAS_SETPGID /**/
586 * This symbol, if defined, indicates that the setpgrp routine is
587 * available to set the current process group.
590 * This symbol, if defined, indicates that the BSD notion of process
591 * group is to be used. For instance, you have to say setpgrp(pid, pgrp)
592 * instead of the USG setpgrp().
595 * This symbol, if defined, indicates that setpgrp needs two
596 * arguments whereas USG one needs none. See also HAS_SETPGID
597 * for a POSIX interface.
599 #undef HAS_SETPGRP /**/
600 #undef USE_BSDPGRP /**/
601 #undef USE_BSD_SETPGRP /**/
604 * This symbol, if defined, indicates that the setpgrp2() (as in DG/UX)
605 * routine is available to set the current process group.
607 #undef HAS_SETPGRP2 /**/
610 * This symbol, if defined, indicates that the setpriority routine is
611 * available to set a process's priority.
613 #undef HAS_SETPRIORITY /**/
616 * This symbol, if defined, indicates that the setregid routine is
617 * available to change the real and effective gid of the current
621 * This symbol, if defined, indicates that the setresgid routine is
622 * available to change the real, effective and saved gid of the current
625 #undef HAS_SETREGID /**/
626 #undef HAS_SETRESGID /**/
629 * This symbol, if defined, indicates that the setreuid routine is
630 * available to change the real and effective uid of the current
634 * This symbol, if defined, indicates that the setresuid routine is
635 * available to change the real, effective and saved uid of the current
638 #undef HAS_SETREUID /**/
639 #undef HAS_SETRESUID /**/
642 * This symbol, if defined, indicates that the setrgid routine is available
643 * to change the real gid of the current program.
645 #undef HAS_SETRGID /**/
648 * This symbol, if defined, indicates that the setruid routine is available
649 * to change the real uid of the current program.
651 #undef HAS_SETRUID /**/
654 * This symbol, if defined, indicates that the setsid routine is
655 * available to set the process group ID.
657 #define HAS_SETSID /**/
660 * This symbol, if defined, indicates that the entire shm*(2) library is
666 * This symbol holds the return type of the shmat() system call.
667 * Usually set to 'void *' or 'char *'.
669 /* HAS_SHMAT_PROTOTYPE:
670 * This symbol, if defined, indicates that the sys/shm.h includes
671 * a prototype for shmat(). Otherwise, it is up to the program to
672 * guess one. Shmat_t shmat _((int, Shmat_t, int)) is a good guess,
673 * but not always right so it should be emitted by the program only
674 * when HAS_SHMAT_PROTOTYPE is not defined to avoid conflicting defs.
676 #undef Shmat_t /* config-skip */
677 #undef HAS_SHMAT_PROTOTYPE /**/
680 * This symbol, if defined, indicates that Vr4's sigaction() routine
683 #define HAS_SIGACTION /**/
686 * This symbol, if defined, indicates that the BSD socket interface is
690 * This symbol, if defined, indicates that the BSD socketpair() call is
693 #define HAS_SOCKET /**/
694 #define HAS_SOCKETPAIR /**/
697 * This symbol is defined if this system has a stat structure declaring
698 * st_blksize and st_blocks.
700 #undef USE_STAT_BLOCKS /**/
703 * This symbol is defined if the _ptr and _cnt fields (or similar)
704 * of the stdio FILE structure can be used to access the stdio buffer
705 * for a file handle. If this is defined, then the FILE_ptr(fp)
706 * and FILE_cnt(fp) macros will also be defined and should be used
707 * to access these fields.
710 * This symbol is defined if the _base field (or similar) of the
711 * stdio FILE structure can be used to access the stdio buffer for
712 * a file handle. If this is defined, then the FILE_base(fp) macro
713 * will also be defined and should be used to access this field.
714 * Also, the FILE_bufsiz(fp) macro will be defined and should be used
715 * to determine the number of bytes in the buffer. USE_STDIO_BASE
716 * will never be defined unless USE_STDIO_PTR is.
718 #undef USE_STDIO_PTR /**/
719 #undef USE_STDIO_BASE /**/
722 * This macro is used to access the _ptr field (or equivalent) of the
723 * FILE structure pointed to by its argument. This macro will always be
724 * defined if USE_STDIO_PTR is defined.
727 * This symbol is defined if the FILE_ptr macro can be used as an
731 * This macro is used to access the _cnt field (or equivalent) of the
732 * FILE structure pointed to by its argument. This macro will always be
733 * defined if USE_STDIO_PTR is defined.
736 * This symbol is defined if the FILE_cnt macro can be used as an
740 #define FILE_ptr(fp) ((fp)->_ptr)
741 #define STDIO_PTR_LVALUE /**/
742 #define FILE_cnt(fp) ((fp)->_cnt)
743 #define STDIO_CNT_LVALUE /**/
747 * This macro is used to access the _base field (or equivalent) of the
748 * FILE structure pointed to by its argument. This macro will always be
749 * defined if USE_STDIO_BASE is defined.
752 * This macro is used to determine the number of bytes in the I/O
753 * buffer pointed to by _base field (or equivalent) of the FILE
754 * structure pointed to its argument. This macro will always be defined
755 * if USE_STDIO_BASE is defined.
757 #ifdef USE_STDIO_BASE
758 #define FILE_base(fp) ((fp)->_base)
759 #define FILE_bufsiz(fp) ((fp)->_cnt + (fp)->_ptr - (fp)->_base)
763 * This macro is used to access the internal stdio _filbuf function
764 * (or equivalent), if STDIO_CNT_LVALUE and STDIO_PTR_LVALUE
765 * are defined. It is typically either _filbuf or __filbuf.
766 * This macro will only be defined if both STDIO_CNT_LVALUE and
767 * STDIO_PTR_LVALUE are defined.
772 * This symbol is defined to indicate that the strchr()/strrchr()
773 * functions are available for string searching. If not, try the
774 * index()/rindex() pair.
777 * This symbol is defined to indicate that the index()/rindex()
778 * functions are available for string searching.
780 #define HAS_STRCHR /**/
781 #undef HAS_INDEX /**/
784 * This symbol, if defined, indicates that the strcoll routine is
785 * available to compare strings using collating information.
787 #define HAS_STRCOLL /**/
790 * This symbol, if defined, indicates that this C compiler knows how
791 * to copy structures. If undefined, you'll need to use a block copy
792 * routine of some sort instead.
794 #define USE_STRUCT_COPY /**/
797 * This symbol, if defined, indicates that the strerror routine is
798 * available to translate error numbers to strings. See the writeup
799 * of Strerror() in this file before you try to define your own.
802 * This symbol, if defined, indicates that the sys_errlist array is
803 * available to translate error numbers to strings. The extern int
804 * sys_nerr gives the size of that table.
807 * This preprocessor symbol is defined as a macro if strerror() is
808 * not available to translate error numbers to strings but sys_errlist[]
811 #define HAS_STRERROR /**/
812 #define HAS_SYS_ERRLIST /**/
813 #define Strerror(e) strerror(e)
816 * This symbol, if defined, indicates that the strxfrm() routine is
817 * available to transform strings.
819 #define HAS_STRXFRM /**/
822 * This symbol, if defined, indicates that the symlink routine is available
823 * to create symbolic links.
825 #define HAS_SYMLINK /**/
828 * This symbol, if defined, indicates that the syscall routine is
829 * available to call arbitrary system calls. If undefined, that's tough.
831 #undef HAS_SYSCALL /**/
834 * This symbol, if defined, indicates that sysconf() is available
835 * to determine system related limits and options.
837 #define HAS_SYSCONF /**/
840 * This symbol, if defined, indicates that the system routine is
841 * available to issue a shell command.
843 #define HAS_SYSTEM /**/
846 * This symbol, if defined, indicates that the tcgetpgrp routine is
847 * available to get foreground process group ID.
849 #define HAS_TCGETPGRP /**/
852 * This symbol, if defined, indicates that the tcsetpgrp routine is
853 * available to set foreground process group ID.
855 #define HAS_TCSETPGRP /**/
858 * This symbol holds the type returned by time(). It can be long,
859 * or time_t on BSD sites (in which case <sys/types.h> should be
862 #define Time_t time_t /* Time type */
865 * This symbol, if defined, indicates that the times() routine exists.
866 * Note that this became obsolete on some systems (SUNOS), which now
867 * use getrusage(). It may be necessary to include <sys/times.h>.
869 #define HAS_TIMES /**/
872 * This symbol, if defined, indicates that the truncate routine is
873 * available to truncate files.
875 #undef HAS_TRUNCATE /**/
878 * This symbol, if defined, indicates that the tzname[] array is
879 * available to access timezone names.
881 #define HAS_TZNAME /**/
884 * This symbol, if defined, indicates that the umask routine is
885 * available to set and get the value of the file creation mask.
887 #define HAS_UMASK /**/
890 * This symbol, if defined, indicates that vfork() exists.
892 #undef HAS_VFORK /**/
895 * This symbol's value is either "void" or "int", corresponding to the
896 * appropriate return type of a signal handler. Thus, you can declare
897 * a signal handler using "Signal_t (*handler)()", and define the
898 * handler using "Signal_t handler(sig)".
900 #define Signal_t void /* Signal handler's return type */
903 * This symbol, if defined, indicates that this C compiler knows about
904 * the volatile declaration.
906 #define HASVOLATILE /**/
908 #define volatile /* config-skip */
912 * This symbol, if defined, indicates that the vprintf routine is available
913 * to printf with a pointer to an argument list. If unavailable, you
914 * may need to write your own, probably in terms of _doprnt().
916 /* USE_CHAR_VSPRINTF:
917 * This symbol is defined if this system has vsprintf() returning type
918 * (char*). The trend seems to be to declare it as "int vsprintf()". It
919 * is up to the package author to declare vsprintf correctly based on the
922 #define HAS_VPRINTF /**/
923 #define USE_CHAR_VSPRINTF /**/
926 * This symbol, if defined, indicates that wait4() exists.
928 #undef HAS_WAIT4 /**/
931 * This symbol, if defined, indicates that the waitpid routine is
932 * available to wait for child process.
934 #undef HAS_WAITPID /**/
937 * This symbol, if defined, indicates that the wcstombs routine is
938 * available to convert wide character strings to multibyte strings.
940 #define HAS_WCSTOMBS /**/
943 * This symbol, if defined, indicates that the wctomb routine is available
944 * to covert a wide character to a multibyte.
946 #define HAS_WCTOMB /**/
949 * This symbol holds the type used to declare file positions in libc.
950 * It can be fpos_t, long, uint, etc... It may be necessary to include
951 * <sys/types.h> to get any typedef'ed information.
953 #define Fpos_t fpos_t /* File position type */
956 * This symbol holds the return type of getgid() and the type of
957 * argument to setrgid() and related functions. Typically,
958 * it is the type of group ids in the kernel. It can be int, ushort,
959 * uid_t, etc... It may be necessary to include <sys/types.h> to get
960 * any typedef'ed information.
962 #define Gid_t gid_t /* config-skip */
965 * This symbol holds the type used for the second argument to
966 * getgroups(). Usually, this is the same of gidtype, but
967 * sometimes it isn't. It can be int, ushort, uid_t, etc...
968 * It may be necessary to include <sys/types.h> to get any
969 * typedef'ed information. This is only required if you have
973 #define Groups_t gid_t /* Type for 2nd arg to getgroups() */
977 * This symbol contains the type of the prefix structure element
978 * in the <db.h> header file. In older versions of DB, it was
979 * int, while in newer ones it is u_int32_t.
982 * This symbol contains the type of the prefix structure element
983 * in the <db.h> header file. In older versions of DB, it was
984 * int, while in newer ones it is size_t.
986 #define DB_Hash_t int /**/
987 #define DB_Prefix_t int /**/
990 * This symbol, if defined, indicates to the C program that it should
991 * include <dirent.h>. Using this symbol also triggers the definition
992 * of the Direntry_t define which ends up being 'struct dirent' or
993 * 'struct direct' depending on the availability of <dirent.h>.
996 * This symbol, if defined, indicates to the C program that the length
997 * of directory entry names is provided by a d_namlen field. Otherwise
998 * you need to do strlen() on the d_name field.
1001 * This symbol is set to 'struct direct' or 'struct dirent' depending on
1002 * whether dirent is available or not. You should use this pseudo type to
1003 * portably declare your directory entries.
1005 #define I_DIRENT /**/
1006 #undef DIRNAMLEN /**/
1007 #define Direntry_t struct dirent
1010 * This symbol, if defined, indicates that <dlfcn.h> exists and should
1016 * This manifest constant tells the C program to include <fcntl.h>.
1018 #define I_FCNTL /**/
1021 * This symbol, if defined, indicates to the C program that it should
1022 * include <float.h> to get definition of symbols like DBL_MAX or
1023 * DBL_MIN, i.e. machine dependent floating point values.
1025 #define I_FLOAT /**/
1028 * This symbol, if defined, indicates to the C program that it should
1034 * This symbol, if defined, indicates to the C program that it should
1035 * include <limits.h> to get definition of symbols like WORD_BIT or
1036 * LONG_MAX, i.e. machine dependant limitations.
1038 #define I_LIMITS /**/
1041 * This symbol, if defined, indicates to the C program that it should
1047 * This symbol, if defined, indicates to the C program that it should
1048 * include <memory.h>.
1050 #undef I_MEMORY /**/
1053 * This symbol, if defined, indicates that <ndbm.h> exists and should
1059 * This symbol, if defined, indicates that <net/errno.h> exists and
1060 * should be included.
1062 #undef I_NET_ERRNO /* config-skip */
1065 * This symbol, if defined, indicates to the C program that it should
1066 * include <netinet/in.h>. Otherwise, you may try <sys/in.h>.
1068 #define I_NETINET_IN /* config-skip */
1071 * This symbol, if defined, indicates to the C program that it should
1075 * This symbol, if defined, indicates to the C program that struct passwd
1076 * contains pw_quota.
1079 * This symbol, if defined, indicates to the C program that struct passwd
1083 * This symbol, if defined, indicates to the C program that struct passwd
1084 * contains pw_change.
1087 * This symbol, if defined, indicates to the C program that struct passwd
1088 * contains pw_class.
1091 * This symbol, if defined, indicates to the C program that struct passwd
1092 * contains pw_expire.
1095 * This symbol, if defined, indicates to the C program that struct passwd
1096 * contains pw_comment.
1101 #undef PWCHANGE /**/
1103 #undef PWEXPIRE /**/
1104 #undef PWCOMMENT /**/
1107 * This symbol, if defined, indicates that <stddef.h> exists and should
1110 #define I_STDDEF /**/
1113 * This symbol, if defined, indicates that <stdlib.h> exists and should
1116 #define I_STDLIB /**/
1119 * This symbol, if defined, indicates to the C program that it should
1120 * include <string.h> (USG systems) instead of <strings.h> (BSD systems).
1122 #define I_STRING /**/
1125 * This symbol, if defined, indicates to the C program that it should
1126 * include <sys/dir.h>.
1128 #undef I_SYS_DIR /**/
1131 * This symbol, if defined, indicates to the C program that it should
1132 * include <sys/file.h> to get definition of R_OK and friends.
1134 #undef I_SYS_FILE /**/
1137 * This symbol, if defined, indicates that <sys/ioctl.h> exists and should
1138 * be included. Otherwise, include <sgtty.h> or <termio.h>.
1140 #define I_SYS_IOCTL /**/
1143 * This symbol, if defined, indicates to the C program that it should
1144 * include <sys/ndir.h>.
1146 #undef I_SYS_NDIR /**/
1149 * This symbol, if defined, indicates to the C program that it should
1150 * include <sys/param.h>.
1152 #define I_SYS_PARAM /**/
1154 /* Plan 9: file position in Plan 9 is <select.h> */
1156 * This symbol, if defined, indicates to the C program that it should
1157 * include <sys/select.h> in order to get definition of struct timeval.
1159 #undef I_SYS_SELECT /**/
1162 * This symbol, if defined, indicates to the C program that it should
1163 * include <sys/times.h>.
1165 #define I_SYS_TIMES /**/
1168 * This symbol, if defined, indicates to the C program that it should
1169 * include <sys/types.h>.
1171 #define I_SYS_TYPES /**/
1174 * This symbol, if defined, indicates to the C program that it should
1175 * include <sys/un.h> to get UNIX domain socket definitions.
1177 #define I_SYS_UN /**/
1180 * This symbol, if defined, indicates that the program should include
1181 * <termio.h> rather than <sgtty.h>. There are also differences in
1182 * the ioctl() calls that depend on the value of this symbol.
1185 * This symbol, if defined, indicates that the program should include
1186 * the POSIX termios.h rather than sgtty.h or termio.h.
1187 * There are also differences in the ioctl() calls that depend on the
1188 * value of this symbol.
1191 * This symbol, if defined, indicates that the program should include
1192 * <sgtty.h> rather than <termio.h>. There are also differences in
1193 * the ioctl() calls that depend on the value of this symbol.
1195 #undef I_TERMIO /**/
1196 #define I_TERMIOS /**/
1199 /* Plan 9: P9 has both <time.h> and <sys/time.h> */
1201 * This symbol, if defined, indicates to the C program that it should
1205 * This symbol, if defined, indicates to the C program that it should
1206 * include <sys/time.h>.
1208 /* I_SYS_TIME_KERNEL:
1209 * This symbol, if defined, indicates to the C program that it should
1210 * include <sys/time.h> with KERNEL defined.
1213 #define I_SYS_TIME /**/
1214 #undef I_SYS_TIME_KERNEL /**/
1217 * This symbol, if defined, indicates to the C program that it should
1218 * include <unistd.h>.
1220 #define I_UNISTD /**/
1223 * This symbol, if defined, indicates to the C program that it should
1224 * include <utime.h>.
1226 #define I_UTIME /**/
1229 * This symbol, if defined, indicates to the C program that it should
1235 * This symbol holds the type used to declare offsets in the kernel.
1236 * It can be int, long, off_t, etc... It may be necessary to include
1237 * <sys/types.h> to get any typedef'ed information.
1239 #define Off_t off_t /* <offset> type */
1242 * This symbol holds the type used to declare file modes
1243 * for systems calls. It is usually mode_t, but may be
1244 * int or unsigned short. It may be necessary to include <sys/types.h>
1245 * to get any typedef'ed information.
1247 #define Mode_t mode_t /* file mode parameter for system calls */
1250 * If defined, this macro indicates that the C compiler can handle
1251 * function prototypes.
1254 * This macro is used to declare function parameters for folks who want
1255 * to make declarations with prototypes using a different style than
1256 * the above macros. Use double parentheses. For example:
1258 * int main _((int argc, char *argv[]));
1260 #define CAN_PROTOTYPE /**/
1261 #ifdef CAN_PROTOTYPE
1262 #define _(args) args /* config-skip */
1264 #define _(args) () /* config-skip */
1268 * This symbol contains the number of bits of random number the rand()
1269 * function produces. Usual values are 15, 16, and 31.
1271 #define RANDBITS 15 /**/
1274 * This symbol holds the name of the directory in which the user wants
1275 * to put publicly executable scripts for the package in question. It
1276 * is often a directory that is mounted across diverse architectures.
1277 * Programs must be prepared to deal with ~name expansion.
1279 #define SCRIPTDIR "/bin"
1282 * This symbol holds the type used for the 2nd, 3rd, and 4th
1283 * arguments to select. Usually, this is 'fd_set *', if HAS_FD_SET
1284 * is defined, and 'int *' otherwise. This is only useful if you
1285 * have select(), of course.
1287 #define Select_fd_set_t fd_set * /**/
1290 * This symbol holds the type used to declare length parameters
1291 * for string functions. It is usually size_t, but may be
1292 * unsigned long, int, etc. It may be necessary to include
1293 * <sys/types.h> to get any typedef'ed information.
1295 #define Size_t size_t /* length paramater for string functions */
1298 * This symbol holds the type used by functions that return
1299 * a count of bytes or an error condition. It must be a signed type.
1300 * It is usually ssize_t, but may be long or int, etc.
1301 * It may be necessary to include <sys/types.h> or <unistd.h>
1302 * to get any typedef'ed information.
1303 * We will pick a type such that sizeof(SSize_t) == sizeof(Size_t).
1305 #define SSize_t ssize_t /* signed count of bytes */
1308 * This symbol is defined to be the type of char used in stdio.h.
1309 * It has the values "unsigned char" or "char".
1311 #define STDCHAR char /**/
1314 * This symbol holds the type used to declare user ids in the kernel.
1315 * It can be int, ushort, uid_t, etc... It may be necessary to include
1316 * <sys/types.h> to get any typedef'ed information.
1318 #define Uid_t uid_t /* UID type */
1321 This symbol, if defined, indicates that the program is running under the
1322 * Plan 9 operating system.
1326 #define OSNAME "plan9"
1328 #define BIN_SH "/bin/rc" /* config-skip */
1331 * This symbol, if defined, indicates that we're using our own malloc.
1333 #undef MYMALLOC /**/
1336 #undef VMS /* config-skip */
1339 * This symbol holds the complete pathname to the sed program.
1341 #define LOC_SED "/bin/sed" /**/
1344 * This symbol contains the ~name expanded version of ARCHLIB, to be used
1345 * in programs that are not prepared to deal with ~ expansion at run-time.
1347 #define ARCHLIB_EXP "/_P9P_OBJTYPE/lib/perl/_P9P_VERSION"
1348 #define ARCHLIB "/_P9P_OBJTYPE/lib/perl/_P9P_VERSION"
1351 * This symbol hold the hexadecimal constant defined in byteorder,
1352 * i.e. 0x1234 or 0x4321, etc...
1354 #if _P9P_OBJTYPE == 386
1355 # define BYTEORDER 0x1234 /* little-endian */ /* config-skip */
1357 # define BYTEORDER 0x4321 /* big-endian */ /* config-skip */
1361 * This symbol, if defined, indicates that the C-shell exists.
1362 * If defined, contains the full pathname of csh.
1366 /* DLSYM_NEEDS_UNDERSCORE:
1367 * This symbol, if defined, indicates that we need to prepend an
1368 * underscore to the symbol name before calling dlsym(). This only
1369 * makes sense if you *have* dlsym, which we will presume is the
1370 * case if you're using dl_dlopen.xs.
1372 #undef DLSYM_NEEDS_UNDERSCORE /* */
1374 /* SETUID_SCRIPTS_ARE_SECURE_NOW:
1375 * This symbol, if defined, indicates that the bug that prevents
1376 * setuid scripts from being secure is not present in this kernel.
1379 * This symbol, if defined, indicates that the C program should
1380 * check the script that it is executing for setuid/setgid bits, and
1381 * attempt to emulate setuid/setgid on systems that have disabled
1382 * setuid #! scripts because the kernel can't do it securely.
1383 * It is up to the package designer to make sure that this emulation
1384 * is done securely. Among other things, it should do an fstat on
1385 * the script it just opened to make sure it really is a setuid/setgid
1386 * script, it should make sure the arguments passed correspond exactly
1387 * to the argument on the #! line, and it should not trust any
1388 * subprocesses to which it must pass the filename rather than the
1389 * file descriptor of the script to be executed.
1391 #define SETUID_SCRIPTS_ARE_SECURE_NOW /**/
1395 * This preprocessor macro is defined to convert a floating point
1396 * number to a string without a trailing decimal point. This
1397 * emulates the behavior of sprintf("%g"), but is sometimes much more
1398 * efficient. If gconvert() is not available, but gcvt() drops the
1399 * trailing decimal point, then gcvt() is used. If all else fails,
1400 * a macro using sprintf("%g") is used. Arguments for the Gconvert
1401 * macro are: value, number of digits, whether trailing zeros should
1402 * be retained, and the output buffer.
1403 * Possible values are:
1404 * d_Gconvert='gconvert((x),(n),(t),(b))'
1405 * d_Gconvert='gcvt((x),(n),(b))'
1406 * d_Gconvert='sprintf((b),"%.*g",(n),(x))'
1407 * The last two assume trailing zeros should not be kept.
1409 #define Gconvert(x,n,t,b) sprintf((b),"%.*g",(n),(x))
1412 * This is the buffer type to be used with Sigsetjmp and Siglongjmp.
1415 * This macro is used in the same way as sigsetjmp(), but will invoke
1416 * traditional setjmp() if sigsetjmp isn't available.
1419 * This macro is used in the same way as siglongjmp(), but will invoke
1420 * traditional longjmp() if siglongjmp isn't available.
1422 #define HAS_SIGSETJMP /**/ /* config-skip */
1423 #define Sigjmp_buf sigjmp_buf /* config-skip */
1424 #define Sigsetjmp(buf,save_mask) sigsetjmp(buf,save_mask) /* config-skip */
1425 #define Siglongjmp(buf,retval) siglongjmp(buf,retval) /* config-skip */
1427 /* USE_DYNAMIC_LOADING:
1428 * This symbol, if defined, indicates that dynamic loading of
1429 * some sort is available.
1431 #undef USE_DYNAMIC_LOADING /**/
1434 * This symbol, if defined, indicates that <dbm.h> exists and should
1438 * This symbol, if defined, indicates that <rpcsvc/dbm.h> exists and
1439 * should be included.
1442 #undef I_RPCSVC_DBM /**/
1445 * This symbol, if defined, indicates to the C program that it should
1446 * include <locale.h>.
1448 #define I_LOCALE /**/
1451 * This symbol, if defined, indicates to the C program that it should
1452 * include <sys/stat.h>.
1454 #define I_SYS_STAT /**/
1457 * This symbol, if defined, indicates that <stdarg.h> exists and should
1461 * This symbol, if defined, indicates to the C program that it should
1462 * include <varargs.h>.
1464 #define I_STDARG /**/
1465 #undef I_VARARGS /**/
1468 * This symbol contains the size of an int, so that the C preprocessor
1469 * can make decisions based on it.
1471 #define INTSIZE 4 /**/
1474 * This variable contains the return type of free(). It is usually
1475 * void, but occasionally int.
1478 * This symbol is the type of pointer returned by malloc and realloc.
1480 #define Malloc_t void * /**/
1481 #define Free_t void /**/
1484 * This symbol is to be used during open() or fcntl(F_SETFL) to turn on
1485 * non-blocking I/O for the file descriptor. Note that there is no way
1486 * back, i.e. you cannot turn it blocking again this way. If you wish to
1487 * alternatively switch between blocking and non-blocking, use the
1488 * ioctl(FIOSNBIO) call instead, but that is not supported by all devices.
1491 * This symbol holds the errno error code set by read() when no data was
1492 * present on the non-blocking file descriptor.
1495 * This symbol holds the return code from read() when no data is present
1496 * on the non-blocking file descriptor. Be careful! If EOF_NONBLOCK is
1497 * not defined, then you can't distinguish between no data and EOF by
1498 * issuing a read(). You'll have to find another way to tell for sure!
1501 * This symbol, if defined, indicates to the C program that a read() on
1502 * a non-blocking file descriptor will return 0 on EOF, and not the value
1503 * held in RD_NODATA (-1 usually, in that case!).
1505 #define VAL_O_NONBLOCK O_NONBLOCK
1506 #define VAL_EAGAIN EAGAIN
1507 #define RD_NODATA -1
1508 #define EOF_NONBLOCK
1511 * This symbol contains the ~name expanded version of OLDARCHLIB, to be
1512 * used in programs that are not prepared to deal with ~ expansion at
1515 #undef OLDARCHLIB_EXP /**/
1516 #undef OLDARCHLIB /**/
1519 * This symbol contains the ~name expanded version of PRIVLIB, to be used
1520 * in programs that are not prepared to deal with ~ expansion at run-time.
1522 #define PRIVLIB_EXP "/sys/lib/perl" /* */
1523 #define PRIVLIB "/sys/lib/perl" /* */
1526 * This symbol contains a list of signal names in order of
1527 * signal number. This is intended
1528 * to be used as a static array initialization, like this:
1529 * char *sig_name[] = { SIG_NAME };
1530 * The signals in the list are separated with commas, and each signal
1531 * is surrounded by double quotes. There is no leading SIG in the signal
1532 * name, i.e. SIGQUIT is known as "QUIT".
1533 * Gaps in the signal numbers (up to NSIG) are filled in with NUMnn,
1534 * etc., where nn is the actual signal number (e.g. NUM37).
1535 * The signal number for sig_name[i] is stored in sig_num[i].
1536 * The last element is 0 to terminate the list with a NULL. This
1537 * corresponds to the 0 at the end of the sig_num list.
1540 * This symbol contains a list of signal numbers, in the same order as the
1541 * SIG_NAME list. It is suitable for static array initialization, as in:
1542 * int sig_num[] = { SIG_NUM };
1543 * The signals in the list are separated with commas, and the indices
1544 * within that list and the SIG_NAME list match, so it's easy to compute
1545 * the signal name from a number or vice versa at the price of a small
1546 * dynamic linear lookup.
1547 * Duplicates are allowed, but are moved to the end of the list.
1548 * The signal number corresponding to sig_name[i] is sig_number[i].
1549 * if (i < NSIG) then sig_number[i] == i.
1550 * The last element is 0, corresponding to the 0 at the end of
1551 * the sig_name list.
1553 #define SIG_NAME "ZERO","HUP","INT","QUIT","ILL","ABRT","FPE","KILL","SEGV","PIPE","ALRM","TERM","USR1","USR2","CHLD","CONT","STOP","TSTP","TTIN","TTOU",0 /* config-skip */
1554 #define SIG_NUM 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,0 /* config-skip */
1557 * This symbol contains the ~name expanded version of SITELIB, to be used
1558 * in programs that are not prepared to deal with ~ expansion at run-time.
1560 #define SITELIB_EXP "/sys/lib/perl/site_perl" /* */
1561 #define SITELIB "/sys/lib/perl/site_perl" /* */
1564 * This symbol contains the ~name expanded version of SITEARCH, to be used
1565 * in programs that are not prepared to deal with ~ expansion at run-time.
1567 #define SITEARCH_EXP "/_P9P_OBJTYPE/lib/perl/_P9P_VERSION/site_perl" /* */
1568 #define SITEARCH "/_P9P_OBJTYPE/lib/perl/_P9P_VERSION/site_perl" /* */
1571 * This variable contains the string to put in front of a perl
1572 * script to make sure (one hopes) that it runs with perl and not
1575 #define STARTPERL "#!/bin/perl" /**/
1578 * Just here to shut up compiler warnings.
1580 #define SH_PATH "/bin/rc" /**/
1582 #define PERLIO_IS_STDIO /* config-skip */
1586 * This symbol, if defined, indicates that the PerlIO abstraction should
1587 * be used throughout. If not defined, stdio should be
1588 * used in a fully backward compatible manner.
1590 #undef USE_PERLIO /**/
1593 * This symbol, if defined, indicates that sfio should
1596 #undef USE_SFIO /**/
1599 * This symbol, if defined, indicates to the C program that
1600 * the getpgid(pid) function is available to get the
1603 #undef HAS_GETPGID /**/
1606 * This symbol, if defined, indicates to the C program that it should
1607 * include <sys/resource.h>.
1609 #define I_SYS_RESOURCE /**/
1612 * This symbol, if defined, indicates to the C program that it should
1613 * include <sys/wait.h>.
1615 #define I_SYS_WAIT /**/
1618 * This symbol, if defined, indicates to the C program that it should
1619 * include <values.h> to get definition of symbols like MINFLOAT or
1620 * MAXLONG, i.e. machine dependant limitations. Probably, you
1621 * should use <limits.h> instead, if it is available.
1623 #undef I_VALUES /**/
1626 * This symbol indicates how much support of the void type is given by this
1627 * compiler. What various bits mean:
1629 * 1 = supports declaration of void
1630 * 2 = supports arrays of pointers to functions returning void
1631 * 4 = supports comparisons between pointers to void functions and
1632 * addresses of void functions
1633 * 8 = suports declaration of generic void pointers
1635 * The package designer should define VOIDUSED to indicate the requirements
1636 * of the package. This can be done either by #defining VOIDUSED before
1637 * including config.h, or by defining defvoidused in Myinit.U. If the
1638 * latter approach is taken, only those flags will be tested. If the
1639 * level of void support necessary is not present, defines void to int.
1644 #define VOIDFLAGS 15
1645 #if (VOIDFLAGS & VOIDUSED) != VOIDUSED
1646 #define void int /* is void to be avoided? */ /* config-skip */
1647 #define M_VOID /* Xenix strikes again */ /* config-skip */