PerlIO #include and #ifdef re-work.
[p5sagit/p5-mst-13.2.git] / perlio.h
1 #ifndef _PERLIO_H
2 #define _PERLIO_H
3 /*
4   Interface for perl to IO functions.
5   There is a hierachy of Configure determined #define controls:
6    USE_STDIO   - forces PerlIO_xxx() to be #define-d onto stdio functions.
7                  This is used for x2p subdirectory and for conservative
8                  builds - "just like perl5.00X used to be".
9                  This dominates over the others.
10
11    USE_PERLIO  - The primary Configure variable that enables PerlIO.
12                  If USE_PERLIO is _NOT_ set
13                    then USE_STDIO above will be set to be conservative.
14                  If USE_PERLIO is set
15                    then there are two modes determined by USE_SFIO:
16
17    USE_SFIO    - If set causes PerlIO_xxx() to be #define-d onto sfio functions.
18                  A backward compatability mode for some specialist applications.
19
20                  If USE_SFIO is not set then PerlIO_xxx() are real functions
21                  defined in perlio.c which implement extra functionality
22                  required for utf8 support.
23
24    One further note - the table-of-functions scheme controlled
25    by PERL_IMPLICIT_SYS turns on USE_PERLIO so that iperlsys.h can
26    #define PerlIO_xxx() to go via the function table, without having
27    to #undef them from (say) stdio forms.
28
29 */
30
31 #if defined(PERL_IMPLICIT_SYS)
32 #ifndef USE_PERLIO
33 # define USE_PERLIO
34 #endif
35 #endif
36
37 #ifndef USE_PERLIO
38 # define USE_STDIO
39 #endif
40
41 #ifdef USE_STDIO
42 #  ifndef PERLIO_IS_STDIO
43 #      define PERLIO_IS_STDIO
44 #  endif
45 #endif
46
47 /* --------------------  End of Configure controls ---------------------------- */
48
49 /*
50  * Although we may not want stdio to be used including <stdio.h> here
51  * avoids issues where stdio.h has strange side effects
52  */
53 #include <stdio.h>
54
55 #if defined(USE_64_BIT_STDIO) && defined(HAS_FTELLO) && !defined(USE_FTELL64)
56 #define ftell ftello
57 #endif
58
59 #if defined(USE_64_BIT_STDIO) && defined(HAS_FSEEKO) && !defined(USE_FSEEK64)
60 #define fseek fseeko
61 #endif
62
63 #ifdef PERLIO_IS_STDIO
64 /* #define PerlIO_xxxx() as equivalent stdio function */
65 #include "perlsdio.h"
66 #else  /* PERLIO_IS_STDIO */
67 #ifdef USE_SFIO
68 /* #define PerlIO_xxxx() as equivalent sfio function */
69 #include "perlsfio.h"
70 #endif /* USE_SFIO */
71 #endif /* PERLIO_IS_STDIO */
72
73 #ifndef PerlIO
74 /* ----------- PerlIO implementation ---------- */
75 /* PerlIO not #define-d to something else - define the implementation */
76
77 typedef struct _PerlIO PerlIOl;
78 typedef struct _PerlIO_funcs PerlIO_funcs;
79 typedef PerlIOl *PerlIO;
80 #define PerlIO PerlIO
81
82 extern void     PerlIO_define_layer     (PerlIO_funcs *tab);
83 extern PerlIO * PerlIO_push             (PerlIO *f,PerlIO_funcs *tab,const char *mode);
84 extern void     PerlIO_pop              (PerlIO *f);
85
86 #endif /* PerlIO */
87
88 /* ----------- End of implementation choices  ---------- */
89
90 #ifndef PERLIO_IS_STDIO
91 /* Not using stdio _directly_ as PerlIO */
92
93 /* We now need to determine  what happens if source trys to use stdio.
94  * There are three cases based on PERLIO_NOT_STDIO which XS code
95  * can set how it wants.
96  */
97
98 #ifdef PERL_CORE
99 /* Make a choice for perl core code
100    - currently this is set to try and catch lingering raw stdio calls.
101      This is a known issue with some non UNIX ports which still use
102      "native" stdio features.
103 */
104 #ifndef PERLIO_NOT_STDIO
105 #define PERLIO_NOT_STDIO 1
106 #endif
107 #endif
108
109 #ifdef PERLIO_NOT_STDIO
110 #if PERLIO_NOT_STDIO
111 /*
112  * PERLIO_NOT_STDIO #define'd as 1
113  * Case 1: Strong denial of stdio - make all stdio calls (we can think of) errors
114  */
115 #include "nostdio.h"
116 #else /* if PERLIO_NOT_STDIO */
117 /*
118  * PERLIO_NOT_STDIO #define'd as 0
119  * Case 2: Declares that both PerlIO and stdio can be used
120  */
121 #endif /* if PERLIO_NOT_STDIO */
122 #else  /* ifdef PERLIO_NOT_STDIO */
123 /*
124  * PERLIO_NOT_STDIO not defined
125  * Case 3: Try and fake stdio calls as PerlIO calls
126  */
127 #include "fakesdio.h"
128 #endif /* ifndef PERLIO_NOT_STDIO */
129 #endif /* PERLIO_IS_STDIO */
130
131 /* ----------- fill in things that have not got #define'd  ---------- */
132
133 #ifndef Fpos_t
134 #define Fpos_t Off_t
135 #endif
136
137 #ifndef EOF
138 #define EOF (-1)
139 #endif
140
141 /* This is to catch case with no stdio */
142 #ifndef BUFSIZ
143 #define BUFSIZ 1024
144 #endif
145
146 #ifndef SEEK_SET
147 #define SEEK_SET 0
148 #endif
149
150 #ifndef SEEK_CUR
151 #define SEEK_CUR 1
152 #endif
153
154 #ifndef SEEK_END
155 #define SEEK_END 2
156 #endif
157
158 /* --------------------- Now prototypes for functions --------------- */
159
160 #ifndef NEXT30_NO_ATTRIBUTE
161 #ifndef HASATTRIBUTE       /* disable GNU-cc attribute checking? */
162 #ifdef  __attribute__      /* Avoid possible redefinition errors */
163 #undef  __attribute__
164 #endif
165 #define __attribute__(attr)
166 #endif
167 #endif
168
169 #ifndef PerlIO_init
170 extern void     PerlIO_init             (void);
171 #endif
172 #ifndef PerlIO_stdoutf
173 extern int      PerlIO_stdoutf          (const char *,...)
174                                         __attribute__((__format__ (__printf__, 1, 2)));
175 #endif
176 #ifndef PerlIO_puts
177 extern int      PerlIO_puts             (PerlIO *,const char *);
178 #endif
179 #ifndef PerlIO_open
180 extern PerlIO * PerlIO_open             (const char *,const char *);
181 #endif
182 #ifndef PerlIO_close
183 extern int      PerlIO_close            (PerlIO *);
184 #endif
185 #ifndef PerlIO_eof
186 extern int      PerlIO_eof              (PerlIO *);
187 #endif
188 #ifndef PerlIO_error
189 extern int      PerlIO_error            (PerlIO *);
190 #endif
191 #ifndef PerlIO_clearerr
192 extern void     PerlIO_clearerr         (PerlIO *);
193 #endif
194 #ifndef PerlIO_getc
195 extern int      PerlIO_getc             (PerlIO *);
196 #endif
197 #ifndef PerlIO_putc
198 extern int      PerlIO_putc             (PerlIO *,int);
199 #endif
200 #ifndef PerlIO_flush
201 extern int      PerlIO_flush            (PerlIO *);
202 #endif
203 #ifndef PerlIO_ungetc
204 extern int      PerlIO_ungetc           (PerlIO *,int);
205 #endif
206 #ifndef PerlIO_fileno
207 extern int      PerlIO_fileno           (PerlIO *);
208 #endif
209 #ifndef PerlIO_fdopen
210 extern PerlIO * PerlIO_fdopen           (int, const char *);
211 #endif
212 #ifndef PerlIO_importFILE
213 extern PerlIO * PerlIO_importFILE       (FILE *,int);
214 #endif
215 #ifndef PerlIO_exportFILE
216 extern FILE *   PerlIO_exportFILE       (PerlIO *,int);
217 #endif
218 #ifndef PerlIO_findFILE
219 extern FILE *   PerlIO_findFILE         (PerlIO *);
220 #endif
221 #ifndef PerlIO_releaseFILE
222 extern void     PerlIO_releaseFILE      (PerlIO *,FILE *);
223 #endif
224 #ifndef PerlIO_read
225 extern SSize_t  PerlIO_read             (PerlIO *,void *,Size_t);
226 #endif
227 #ifndef PerlIO_write
228 extern SSize_t  PerlIO_write            (PerlIO *,const void *,Size_t);
229 #endif
230 #ifndef PerlIO_setlinebuf
231 extern void     PerlIO_setlinebuf       (PerlIO *);
232 #endif
233 #ifndef PerlIO_printf
234 extern int      PerlIO_printf           (PerlIO *, const char *,...)
235                                         __attribute__((__format__ (__printf__, 2, 3)));
236 #endif
237 #ifndef PerlIO_sprintf
238 extern int      PerlIO_sprintf          (char *, int, const char *,...)
239                                         __attribute__((__format__ (__printf__, 3, 4)));
240 #endif
241 #ifndef PerlIO_vprintf
242 extern int      PerlIO_vprintf          (PerlIO *, const char *, va_list);
243 #endif
244 #ifndef PerlIO_tell
245 extern Off_t    PerlIO_tell             (PerlIO *);
246 #endif
247 #ifndef PerlIO_seek
248 extern int      PerlIO_seek             (PerlIO *, Off_t, int);
249 #endif
250 #ifndef PerlIO_rewind
251 extern void     PerlIO_rewind           (PerlIO *);
252 #endif
253 #ifndef PerlIO_has_base
254 extern int      PerlIO_has_base         (PerlIO *);
255 #endif
256 #ifndef PerlIO_has_cntptr
257 extern int      PerlIO_has_cntptr       (PerlIO *);
258 #endif
259 #ifndef PerlIO_fast_gets
260 extern int      PerlIO_fast_gets        (PerlIO *);
261 #endif
262 #ifndef PerlIO_canset_cnt
263 extern int      PerlIO_canset_cnt       (PerlIO *);
264 #endif
265 #ifndef PerlIO_get_ptr
266 extern STDCHAR * PerlIO_get_ptr         (PerlIO *);
267 #endif
268 #ifndef PerlIO_get_cnt
269 extern int      PerlIO_get_cnt          (PerlIO *);
270 #endif
271 #ifndef PerlIO_set_cnt
272 extern void     PerlIO_set_cnt          (PerlIO *,int);
273 #endif
274 #ifndef PerlIO_set_ptrcnt
275 extern void     PerlIO_set_ptrcnt       (PerlIO *,STDCHAR *,int);
276 #endif
277 #ifndef PerlIO_get_base
278 extern STDCHAR * PerlIO_get_base        (PerlIO *);
279 #endif
280 #ifndef PerlIO_get_bufsiz
281 extern int      PerlIO_get_bufsiz       (PerlIO *);
282 #endif
283 #ifndef PerlIO_tmpfile
284 extern PerlIO * PerlIO_tmpfile          (void);
285 #endif
286 #ifndef PerlIO_stdin
287 extern PerlIO * PerlIO_stdin            (void);
288 #endif
289 #ifndef PerlIO_stdout
290 extern PerlIO * PerlIO_stdout           (void);
291 #endif
292 #ifndef PerlIO_stderr
293 extern PerlIO * PerlIO_stderr           (void);
294 #endif
295 #ifndef PerlIO_getpos
296 extern int      PerlIO_getpos           (PerlIO *,Fpos_t *);
297 #endif
298 #ifndef PerlIO_setpos
299 extern int      PerlIO_setpos           (PerlIO *,const Fpos_t *);
300 #endif
301 #ifndef PerlIO_fdupopen
302 extern PerlIO * PerlIO_fdupopen         (PerlIO *);
303 #endif
304 #ifndef PerlIO_isutf8
305 extern int      PerlIO_isutf8           (PerlIO *);
306 #endif
307
308 #endif /* _PERLIO_H */