[inseparable changes from patch from perl5.003_08 to perl5.003_09]
[p5sagit/p5-mst-13.2.git] / malloc.c
1 /*    malloc.c
2  *
3  */
4
5 #ifndef lint
6 #ifdef DEBUGGING
7 #define RCHECK
8 #endif
9 /*
10  * malloc.c (Caltech) 2/21/82
11  * Chris Kingsley, kingsley@cit-20.
12  *
13  * This is a very fast storage allocator.  It allocates blocks of a small 
14  * number of different sizes, and keeps free lists of each size.  Blocks that
15  * don't exactly fit are passed up to the next larger size.  In this 
16  * implementation, the available sizes are 2^n-4 (or 2^n-12) bytes long.
17  * If PACK_MALLOC is defined, small blocks are 2^n bytes long.
18  * This is designed for use in a program that uses vast quantities of memory,
19  * but bombs when it runs out. 
20  */
21
22 #include "EXTERN.h"
23 #include "perl.h"
24
25 #ifdef DEBUGGING
26 #undef DEBUG_m
27 #define DEBUG_m(a)  if (debug & 128)   a
28 #endif
29
30 /* I don't much care whether these are defined in sys/types.h--LAW */
31
32 #define u_char unsigned char
33 #define u_int unsigned int
34 #define u_short unsigned short
35
36 /* 286 and atarist like big chunks, which gives too much overhead. */
37 #if (defined(RCHECK) || defined(I286) || defined(atarist)) && defined(PACK_MALLOC)
38 #undef PACK_MALLOC
39 #endif 
40
41
42 /*
43  * The description below is applicable if PACK_MALLOC is not defined.
44  *
45  * The overhead on a block is at least 4 bytes.  When free, this space
46  * contains a pointer to the next free block, and the bottom two bits must
47  * be zero.  When in use, the first byte is set to MAGIC, and the second
48  * byte is the size index.  The remaining bytes are for alignment.
49  * If range checking is enabled and the size of the block fits
50  * in two bytes, then the top two bytes hold the size of the requested block
51  * plus the range checking words, and the header word MINUS ONE.
52  */
53 union   overhead {
54         union   overhead *ov_next;      /* when free */
55 #if MEM_ALIGNBYTES > 4
56         double  strut;                  /* alignment problems */
57 #endif
58         struct {
59                 u_char  ovu_magic;      /* magic number */
60                 u_char  ovu_index;      /* bucket # */
61 #ifdef RCHECK
62                 u_short ovu_size;       /* actual block size */
63                 u_int   ovu_rmagic;     /* range magic number */
64 #endif
65         } ovu;
66 #define ov_magic        ovu.ovu_magic
67 #define ov_index        ovu.ovu_index
68 #define ov_size         ovu.ovu_size
69 #define ov_rmagic       ovu.ovu_rmagic
70 };
71
72 #ifdef DEBUGGING
73 static void botch _((char *s));
74 #endif
75 static void morecore _((int bucket));
76 static int findbucket _((union overhead *freep, int srchlen));
77
78 #define MAGIC           0xff            /* magic # on accounting info */
79 #define RMAGIC          0x55555555      /* magic # on range info */
80 #ifdef RCHECK
81 #define RSLOP           sizeof (u_int)
82 #else
83 #define RSLOP           0
84 #endif
85
86 #ifdef PACK_MALLOC
87 /*
88  * In this case it is assumed that if we do sbrk() in 2K units, we
89  * will get 2K aligned blocks. The bucket number of the given subblock is
90  * on the boundary of 2K block which contains the subblock.
91  * Several following bytes contain the magic numbers for the subblocks
92  * in the block.
93  *
94  * Sizes of chunks are powers of 2 for chunks in buckets <=
95  * MAX_PACKED, after this they are (2^n - sizeof(union overhead)) (to
96  * get alignment right).
97  *
98  * We suppose that starts of all the chunks in a 2K block are in
99  * different 2^n-byte-long chunks.  If the top of the last chunk is
100  * aligned on a boundary of 2K block, this means that
101  * sizeof(union overhead)*"number of chunks" < 2^n, or
102  * sizeof(union overhead)*2K < 4^n, or n > 6 + log2(sizeof()/2)/2, if a
103  * chunk of size 2^n - overhead is used. Since this rules out n = 7
104  * for 8 byte alignment, we specialcase allocation of the first of 16
105  * 128-byte-long chunks.
106  *
107  * Note that with the above assumption we automatically have enough
108  * place for MAGIC at the start of 2K block.  Note also that we
109  * overlay union overhead over the chunk, thus the start of the chunk
110  * is immediately overwritten after freeing.
111  */
112 #  define MAX_PACKED 6
113 #  define MAX_2_POT_ALGO ((1<<(MAX_PACKED + 1)) - M_OVERHEAD)
114 #  define TWOK_MASK ((1<<11) - 1)
115 #  define TWOK_MASKED(x) ((int)x & ~TWOK_MASK)
116 #  define TWOK_SHIFT(x) ((int)x & TWOK_MASK)
117 #  define OV_INDEXp(block) ((u_char*)(TWOK_MASKED(block)))
118 #  define OV_INDEX(block) (*OV_INDEXp(block))
119 #  define OV_MAGIC(block,bucket) (*(OV_INDEXp(block) +                  \
120                                     (TWOK_SHIFT(block)>>(bucket + 3)) + \
121                                     (bucket > MAX_NONSHIFT ? 1 : 0)))
122 #  define CHUNK_SHIFT 0
123
124 static u_char n_blks[11 - 3]     = {224, 120, 62, 31, 16, 8, 4, 2};
125 static u_short blk_shift[11 - 3] = {256, 128, 64, 32, 
126                                     16*sizeof(union overhead), 
127                                     8*sizeof(union overhead), 
128                                     4*sizeof(union overhead), 
129                                     2*sizeof(union overhead), 
130 #  define MAX_NONSHIFT 2        /* Shift 64 greater than chunk 32. */
131 };
132
133 #  ifdef DEBUGGING_MSTATS
134 static u_int sbrk_slack;
135 static u_int start_slack;
136 #  endif
137
138 #else  /* !PACK_MALLOC */
139
140 #  define OV_MAGIC(block,bucket) (block)->ov_magic
141 #  define OV_INDEX(block) (block)->ov_index
142 #  define CHUNK_SHIFT 1
143 #endif /* !PACK_MALLOC */
144
145 #  define M_OVERHEAD (sizeof(union overhead) + RSLOP)
146
147 /*
148  * Big allocations are often of the size 2^n bytes. To make them a
149  * little bit better, make blocks of size 2^n+pagesize for big n.
150  */
151
152 #ifdef TWO_POT_OPTIMIZE
153
154 #  define PERL_PAGESIZE 4096
155 #  define FIRST_BIG_TWO_POT 14          /* 16K */
156 #  define FIRST_BIG_BLOCK (1<<FIRST_BIG_TWO_POT) /* 16K */
157 /* If this value or more, check against bigger blocks. */
158 #  define FIRST_BIG_BOUND (FIRST_BIG_BLOCK - M_OVERHEAD)
159 /* If less than this value, goes into 2^n-overhead-block. */
160 #  define LAST_SMALL_BOUND ((FIRST_BIG_BLOCK>>1) - M_OVERHEAD)
161
162 #endif /* TWO_POT_OPTIMIZE */
163
164 #ifdef PERL_EMERGENCY_SBRK
165
166 #ifndef BIG_SIZE
167 #  define BIG_SIZE (1<<16)              /* 64K */
168 #endif 
169
170 static char *emergency_buffer;
171 static MEM_SIZE emergency_buffer_size;
172
173 static char *
174 emergency_sbrk(size)
175     MEM_SIZE size;
176 {
177     if (size >= BIG_SIZE) {
178         /* Give the possibility to recover: */
179         die("Out of memory during request for %i bytes", size);
180         /* croak may eat too much memory. */
181     }
182
183     if (!emergency_buffer) {            
184         /* First offense, give a possibility to recover by dieing. */
185         /* No malloc involved here: */
186         GV **gvp = (GV**)hv_fetch(defstash, "^M", 2, 0);
187         SV *sv;
188         char *pv;
189
190         if (!gvp) gvp = (GV**)hv_fetch(defstash, "\015", 1, 0);
191         if (!gvp || !(sv = GvSV(*gvp)) || !SvPOK(sv) 
192             || (SvLEN(sv) < (1<<11) - M_OVERHEAD)) 
193             return (char *)-1;          /* Now die die die... */
194
195         /* Got it, now detach SvPV: */
196         pv = SvPV(sv, na);
197         /* Check alignment: */
198         if ((pv - M_OVERHEAD) & (1<<11 - 1)) {
199             PerlIO_puts(PerlIO_stderr(),"Bad alignment of $^M!\n");
200             return (char *)-1;          /* die die die */
201         }
202
203         emergency_buffer = pv - M_OVERHEAD;
204         emergency_buffer_size = SvLEN(sv) + M_OVERHEAD;
205         SvPOK_off(sv);
206         SvREADONLY_on(sv);
207         die("Out of memory!");          /* croak may eat too much memory. */
208     } else if (emergency_buffer_size >= size) {
209         emergency_buffer_size -= size;
210         return emergency_buffer + emergency_buffer_size;
211     }
212     
213     return (char *)-1;                  /* poor guy... */
214 }
215
216 #else /* !PERL_EMERGENCY_SBRK */
217 #  define emergency_sbrk(size)  -1
218 #endif /* !PERL_EMERGENCY_SBRK */
219
220 /*
221  * nextf[i] is the pointer to the next free block of size 2^(i+3).  The
222  * smallest allocatable block is 8 bytes.  The overhead information
223  * precedes the data area returned to the user.
224  */
225 #define NBUCKETS 30
226 static  union overhead *nextf[NBUCKETS];
227
228 #ifdef USE_PERL_SBRK
229 #define sbrk(a) Perl_sbrk(a)
230 char *  Perl_sbrk _((int size));
231 #else
232 extern  char *sbrk();
233 #endif
234
235 #ifdef DEBUGGING_MSTATS
236 /*
237  * nmalloc[i] is the difference between the number of mallocs and frees
238  * for a given block size.
239  */
240 static  u_int nmalloc[NBUCKETS];
241 #endif
242
243 #ifdef DEBUGGING
244 #define ASSERT(p)   if (!(p)) botch(STRINGIFY(p));  else
245 static void
246 botch(s)
247         char *s;
248 {
249         PerlIO_printf(PerlIO_stderr(), "assertion botched: %s\n", s);
250         abort();
251 }
252 #else
253 #define ASSERT(p)
254 #endif
255
256 Malloc_t
257 malloc(nbytes)
258         register MEM_SIZE nbytes;
259 {
260         register union overhead *p;
261         register int bucket = 0;
262         register MEM_SIZE shiftr;
263
264 #ifdef PERL_CORE
265 #ifdef DEBUGGING
266         MEM_SIZE size = nbytes;
267 #endif
268
269 #ifdef HAS_64K_LIMIT
270         if (nbytes > 0xffff) {
271                 PerlIO_printf(PerlIO_stderr(), "Allocation too large: %lx\n", (long)nbytes);
272                 my_exit(1);
273         }
274 #endif /* HAS_64K_LIMIT */
275 #ifdef DEBUGGING
276         if ((long)nbytes < 0)
277             croak("panic: malloc");
278 #endif
279 #endif /* PERL_CORE */
280
281         /*
282          * Convert amount of memory requested into
283          * closest block size stored in hash buckets
284          * which satisfies request.  Account for
285          * space used per block for accounting.
286          */
287 #ifdef PACK_MALLOC
288         if (nbytes > MAX_2_POT_ALGO) {
289 #endif
290 #ifdef TWO_POT_OPTIMIZE
291             if (nbytes >= FIRST_BIG_BOUND) {
292                 nbytes -= PERL_PAGESIZE;
293             }
294 #endif 
295             nbytes += M_OVERHEAD;
296             nbytes = (nbytes + 3) &~ 3; 
297 #ifdef PACK_MALLOC
298         } else if (nbytes == 0) {
299             nbytes = 1;
300         }
301 #endif
302         shiftr = (nbytes - 1) >> 2;
303         /* apart from this loop, this is O(1) */
304         while (shiftr >>= 1)
305                 bucket++;
306         /*
307          * If nothing in hash bucket right now,
308          * request more memory from the system.
309          */
310         if (nextf[bucket] == NULL)    
311                 morecore(bucket);
312         if ((p = (union overhead *)nextf[bucket]) == NULL) {
313 #ifdef PERL_CORE
314                 if (!nomemok) {
315                     PerlIO_puts(PerlIO_stderr(),"Out of memory!\n");
316                     my_exit(1);
317                 }
318 #else
319                 return (NULL);
320 #endif
321         }
322
323 #ifdef PERL_CORE
324     DEBUG_m(PerlIO_printf(Perl_debug_log, "0x%lx: (%05d) malloc %ld bytes\n",
325         (unsigned long)(p+1),an++,(long)size));
326 #endif /* PERL_CORE */
327
328         /* remove from linked list */
329 #ifdef RCHECK
330         if (*((int*)p) & (sizeof(union overhead) - 1))
331             PerlIO_printf(PerlIO_stderr(), "Corrupt malloc ptr 0x%lx at 0x%lx\n",
332                 (unsigned long)*((int*)p),(unsigned long)p);
333 #endif
334         nextf[bucket] = p->ov_next;
335         OV_MAGIC(p, bucket) = MAGIC;
336 #ifndef PACK_MALLOC
337         OV_INDEX(p) = bucket;
338 #endif
339 #ifdef DEBUGGING_MSTATS
340         nmalloc[bucket]++;
341 #endif
342 #ifdef RCHECK
343         /*
344          * Record allocated size of block and
345          * bound space with magic numbers.
346          */
347         if (nbytes <= 0x10000)
348                 p->ov_size = nbytes - 1;
349         p->ov_rmagic = RMAGIC;
350         *((u_int *)((caddr_t)p + nbytes - RSLOP)) = RMAGIC;
351 #endif
352         return ((Malloc_t)(p + CHUNK_SHIFT));
353 }
354
355 /*
356  * Allocate more memory to the indicated bucket.
357  */
358 static void
359 morecore(bucket)
360         register int bucket;
361 {
362         register union overhead *op;
363         register int rnu;       /* 2^rnu bytes will be requested */
364         register int nblks;     /* become nblks blocks of the desired size */
365         register MEM_SIZE siz, needed;
366         int slack = 0;
367
368         if (nextf[bucket])
369                 return;
370         if (bucket == (sizeof(MEM_SIZE)*8 - 3)) {
371             croak("Allocation too large");
372         }
373         /*
374          * Insure memory is allocated
375          * on a page boundary.  Should
376          * make getpageize call?
377          */
378 #ifndef atarist /* on the atari we dont have to worry about this */
379         op = (union overhead *)sbrk(0);
380 #  ifndef I286
381 #    ifdef PACK_MALLOC
382         if ((int)op & 0x7ff)
383                 (void)sbrk(slack = 2048 - ((int)op & 0x7ff));
384 #    else
385         if ((int)op & 0x3ff)
386                 (void)sbrk(slack = 1024 - ((int)op & 0x3ff));
387 #    endif
388 #    if defined(DEBUGGING_MSTATS) && defined(PACK_MALLOC)
389         sbrk_slack += slack;
390 #    endif
391 #  else
392         /* The sbrk(0) call on the I286 always returns the next segment */
393 #  endif
394 #endif /* atarist */
395
396 #if !(defined(I286) || defined(atarist))
397         /* take 2k unless the block is bigger than that */
398         rnu = (bucket <= 8) ? 11 : bucket + 3;
399 #else
400         /* take 16k unless the block is bigger than that 
401            (80286s like large segments!), probably good on the atari too */
402         rnu = (bucket <= 11) ? 14 : bucket + 3;
403 #endif
404         nblks = 1 << (rnu - (bucket + 3));  /* how many blocks to get */
405         needed = (MEM_SIZE)1 << rnu;
406 #ifdef TWO_POT_OPTIMIZE
407         needed += (bucket >= (FIRST_BIG_TWO_POT - 3) ? PERL_PAGESIZE : 0);
408 #endif 
409         op = (union overhead *)sbrk(needed);
410         /* no more room! */
411         if ((int)op == -1 &&
412             (int)(op = (union overhead *)emergency_sbrk(size)) == -1)
413                 return;
414         /*
415          * Round up to minimum allocation size boundary
416          * and deduct from block count to reflect.
417          */
418 #ifndef I286
419 #  ifdef PACK_MALLOC
420         if ((int)op & 0x7ff)
421                 croak("panic: Off-page sbrk");
422 #  endif
423         if ((int)op & 7) {
424                 op = (union overhead *)(((MEM_SIZE)op + 8) &~ 7);
425                 nblks--;
426         }
427 #else
428         /* Again, this should always be ok on an 80286 */
429 #endif
430         /*
431          * Add new memory allocated to that on
432          * free list for this hash bucket.
433          */
434         siz = 1 << (bucket + 3);
435 #ifdef PACK_MALLOC
436         *(u_char*)op = bucket;  /* Fill index. */
437         if (bucket <= MAX_PACKED - 3) {
438             op = (union overhead *) ((char*)op + blk_shift[bucket]);
439             nblks = n_blks[bucket];
440 #  ifdef DEBUGGING_MSTATS
441             start_slack += blk_shift[bucket];
442 #  endif
443         } else if (bucket <= 11 - 1 - 3) {
444             op = (union overhead *) ((char*)op + blk_shift[bucket]);
445             /* nblks = n_blks[bucket]; */
446             siz -= sizeof(union overhead);
447         } else op++;            /* One chunk per block. */
448 #endif /* !PACK_MALLOC */
449         nextf[bucket] = op;
450         while (--nblks > 0) {
451                 op->ov_next = (union overhead *)((caddr_t)op + siz);
452                 op = (union overhead *)((caddr_t)op + siz);
453         }
454         /* Not all sbrks return zeroed memory.*/
455         op->ov_next = (union overhead *)NULL;
456 #ifdef PACK_MALLOC
457         if (bucket == 7 - 3) {  /* Special case, explanation is above. */
458             union overhead *n_op = nextf[7 - 3]->ov_next;
459             nextf[7 - 3] = (union overhead *)((caddr_t)nextf[7 - 3] 
460                                               - sizeof(union overhead));
461             nextf[7 - 3]->ov_next = n_op;
462         }
463 #endif /* !PACK_MALLOC */
464 }
465
466 Free_t
467 free(mp)
468         Malloc_t mp;
469 {   
470         register MEM_SIZE size;
471         register union overhead *op;
472         char *cp = (char*)mp;
473 #ifdef PACK_MALLOC
474         u_char bucket;
475 #endif 
476
477 #ifdef PERL_CORE
478     DEBUG_m(PerlIO_printf(Perl_debug_log, "0x%lx: (%05d) free\n",(unsigned long)cp,an++));
479 #endif /* PERL_CORE */
480
481         if (cp == NULL)
482                 return;
483         op = (union overhead *)((caddr_t)cp 
484                                 - sizeof (union overhead) * CHUNK_SHIFT);
485 #ifdef PACK_MALLOC
486         bucket = OV_INDEX(op);
487 #endif 
488 #ifdef DEBUGGING
489         ASSERT(OV_MAGIC(op, bucket) == MAGIC); /* make sure it was in use */
490 #else
491         if (OV_MAGIC(op, bucket) != MAGIC) {
492                 static bad_free_warn = -1;
493                 if (bad_free_warn == -1) {
494                     char *pbf = getenv("PERL_BADFREE");
495                     bad_free_warn = (pbf) ? atoi(pbf) : 1;
496                 }
497                 if (!bad_free_warn)
498                     return;
499 #ifdef RCHECK
500                 warn("%s free() ignored",
501                     op->ov_rmagic == RMAGIC - 1 ? "Duplicate" : "Bad");
502 #else
503                 warn("Bad free() ignored");
504 #endif
505                 return;                         /* sanity */
506         }
507 #endif
508 #ifdef RCHECK
509         ASSERT(op->ov_rmagic == RMAGIC);
510         if (OV_INDEX(op) <= 13)
511                 ASSERT(*(u_int *)((caddr_t)op + op->ov_size + 1 - RSLOP) == RMAGIC);
512         op->ov_rmagic = RMAGIC - 1;
513 #endif
514         ASSERT(OV_INDEX(op) < NBUCKETS);
515         size = OV_INDEX(op);
516         op->ov_next = nextf[size];
517         nextf[size] = op;
518 #ifdef DEBUGGING_MSTATS
519         nmalloc[size]--;
520 #endif
521 }
522
523 /*
524  * When a program attempts "storage compaction" as mentioned in the
525  * old malloc man page, it realloc's an already freed block.  Usually
526  * this is the last block it freed; occasionally it might be farther
527  * back.  We have to search all the free lists for the block in order
528  * to determine its bucket: 1st we make one pass thru the lists
529  * checking only the first block in each; if that fails we search
530  * ``reall_srchlen'' blocks in each list for a match (the variable
531  * is extern so the caller can modify it).  If that fails we just copy
532  * however many bytes was given to realloc() and hope it's not huge.
533  */
534 int reall_srchlen = 4;  /* 4 should be plenty, -1 =>'s whole list */
535
536 Malloc_t
537 realloc(mp, nbytes)
538         Malloc_t mp; 
539         MEM_SIZE nbytes;
540 {   
541         register MEM_SIZE onb;
542         union overhead *op;
543         char *res;
544         register int i;
545         int was_alloced = 0;
546         char *cp = (char*)mp;
547
548 #ifdef PERL_CORE
549 #ifdef DEBUGGING
550         MEM_SIZE size = nbytes;
551 #endif
552
553 #ifdef HAS_64K_LIMIT
554         if (nbytes > 0xffff) {
555                 PerlIO_printf(PerlIO_stderr(), "Reallocation too large: %lx\n", size);
556                 my_exit(1);
557         }
558 #endif /* HAS_64K_LIMIT */
559         if (!cp)
560                 return malloc(nbytes);
561 #ifdef DEBUGGING
562         if ((long)nbytes < 0)
563                 croak("panic: realloc");
564 #endif
565 #endif /* PERL_CORE */
566
567         op = (union overhead *)((caddr_t)cp 
568                                 - sizeof (union overhead) * CHUNK_SHIFT);
569         i = OV_INDEX(op);
570         if (OV_MAGIC(op, i) == MAGIC) {
571                 was_alloced = 1;
572         } else {
573                 /*
574                  * Already free, doing "compaction".
575                  *
576                  * Search for the old block of memory on the
577                  * free list.  First, check the most common
578                  * case (last element free'd), then (this failing)
579                  * the last ``reall_srchlen'' items free'd.
580                  * If all lookups fail, then assume the size of
581                  * the memory block being realloc'd is the
582                  * smallest possible.
583                  */
584                 if ((i = findbucket(op, 1)) < 0 &&
585                     (i = findbucket(op, reall_srchlen)) < 0)
586                         i = 0;
587         }
588         onb = (1L << (i + 3)) - 
589 #ifdef PACK_MALLOC
590             (i <= (MAX_PACKED - 3) ? 0 : M_OVERHEAD)
591 #else
592             M_OVERHEAD
593 #endif
594 #ifdef TWO_POT_OPTIMIZE
595             + (i >= (FIRST_BIG_TWO_POT - 3) ? PERL_PAGESIZE : 0)
596 #endif
597             ;
598         /* 
599          *  avoid the copy if same size block.
600          *  We are not agressive with boundary cases. Note that it is
601          *  possible for small number of cases give false negative if
602          *  both new size and old one are in the bucket for
603          *  FIRST_BIG_TWO_POT, but the new one is near the lower end.
604          */
605         if (was_alloced &&
606             nbytes <= onb && (nbytes > ( (onb >> 1) - M_OVERHEAD )
607 #ifdef TWO_POT_OPTIMIZE
608                               || (i == (FIRST_BIG_TWO_POT - 3) 
609                                   && nbytes >= LAST_SMALL_BOUND )
610 #endif  
611                 )) {
612 #ifdef RCHECK
613                 /*
614                  * Record new allocated size of block and
615                  * bound space with magic numbers.
616                  */
617                 if (OV_INDEX(op) <= 13) {
618                         /*
619                          * Convert amount of memory requested into
620                          * closest block size stored in hash buckets
621                          * which satisfies request.  Account for
622                          * space used per block for accounting.
623                          */
624                         nbytes += M_OVERHEAD;
625                         nbytes = (nbytes + 3) &~ 3; 
626                         op->ov_size = nbytes - 1;
627                         *((u_int *)((caddr_t)op + nbytes - RSLOP)) = RMAGIC;
628                 }
629 #endif
630                 res = cp;
631         }
632         else {
633                 if ((res = (char*)malloc(nbytes)) == NULL)
634                         return (NULL);
635                 if (cp != res)                  /* common optimization */
636                         Copy(cp, res, (MEM_SIZE)(nbytes<onb?nbytes:onb), char);
637                 if (was_alloced)
638                         free(cp);
639         }
640
641 #ifdef PERL_CORE
642 #ifdef DEBUGGING
643     if (debug & 128) {
644         PerlIO_printf(PerlIO_stderr(), "0x%lx: (%05d) rfree\n",(unsigned long)res,an++);
645         PerlIO_printf(PerlIO_stderr(), "0x%lx: (%05d) realloc %ld bytes\n",
646             (unsigned long)res,an++,(long)size);
647     }
648 #endif
649 #endif /* PERL_CORE */
650         return ((Malloc_t)res);
651 }
652
653 /*
654  * Search ``srchlen'' elements of each free list for a block whose
655  * header starts at ``freep''.  If srchlen is -1 search the whole list.
656  * Return bucket number, or -1 if not found.
657  */
658 static int
659 findbucket(freep, srchlen)
660         union overhead *freep;
661         int srchlen;
662 {
663         register union overhead *p;
664         register int i, j;
665
666         for (i = 0; i < NBUCKETS; i++) {
667                 j = 0;
668                 for (p = nextf[i]; p && j != srchlen; p = p->ov_next) {
669                         if (p == freep)
670                                 return (i);
671                         j++;
672                 }
673         }
674         return (-1);
675 }
676
677 Malloc_t
678 calloc(elements, size)
679         register MEM_SIZE elements;
680         register MEM_SIZE size;
681 {
682     long sz = elements * size;
683     Malloc_t p = malloc(sz);
684
685     if (p) {
686         memset((void*)p, 0, sz);
687     }
688     return p;
689 }
690
691 #ifdef DEBUGGING_MSTATS
692 /*
693  * mstats - print out statistics about malloc
694  * 
695  * Prints two lines of numbers, one showing the length of the free list
696  * for each size category, the second showing the number of mallocs -
697  * frees for each size category.
698  */
699 void
700 dump_mstats(s)
701         char *s;
702 {
703         register int i, j;
704         register union overhead *p;
705         int topbucket=0, totfree=0, totused=0;
706         u_int nfree[NBUCKETS];
707
708         for (i=0; i < NBUCKETS; i++) {
709                 for (j = 0, p = nextf[i]; p; p = p->ov_next, j++)
710                         ;
711                 nfree[i] = j;
712                 totfree += nfree[i]   * (1 << (i + 3));
713                 totused += nmalloc[i] * (1 << (i + 3));
714                 if (nfree[i] || nmalloc[i])
715                         topbucket = i;
716         }
717         if (s)
718                 PerlIO_printf(PerlIO_stderr(), "Memory allocation statistics %s (buckets 8..%d)\n",
719                         s, (1 << (topbucket + 3)) );
720         PerlIO_printf(PerlIO_stderr(), " %7d free: ", totfree);
721         for (i=0; i <= topbucket; i++) {
722                 PerlIO_printf(PerlIO_stderr(), (i<5)?" %5d":" %3d", nfree[i]);
723         }
724         PerlIO_printf(PerlIO_stderr(), "\n %7d used: ", totused);
725         for (i=0; i <= topbucket; i++) {
726                 PerlIO_printf(PerlIO_stderr(), (i<5)?" %5d":" %3d", nmalloc[i]);
727         }
728         PerlIO_printf(PerlIO_stderr(), "\n");
729 #ifdef PACK_MALLOC
730         if (sbrk_slack || start_slack) {
731             PerlIO_printf(PerlIO_stderr(), "Odd ends: %7d bytes from sbrk(), %7d from malloc.\n",
732                     sbrk_slack, start_slack);
733         }
734 #endif
735 }
736 #else
737 void
738 dump_mstats(s)
739     char *s;
740 {
741 }
742 #endif
743 #endif /* lint */
744
745
746 #ifdef USE_PERL_SBRK
747
748 #   ifdef NeXT
749 #      define PERL_SBRK_VIA_MALLOC
750 #   endif
751
752 #   ifdef PERL_SBRK_VIA_MALLOC
753 #      ifdef HIDEMYMALLOC
754 #         undef malloc
755 #      else
756 #         include "Error: -DPERL_SBRK_VIA_MALLOC requires -DHIDEMYMALLOC"
757 #      endif
758
759 /* it may seem schizophrenic to use perl's malloc and let it call system */
760 /* malloc, the reason for that is only the 3.2 version of the OS that had */
761 /* frequent core dumps within nxzonefreenolock. This sbrk routine put an */
762 /* end to the cores */
763
764 #      define SYSTEM_ALLOC(a) malloc(a)
765
766 #   endif  /* PERL_SBRK_VIA_MALLOC */
767
768 static IV Perl_sbrk_oldchunk;
769 static long Perl_sbrk_oldsize;
770
771 #   define PERLSBRK_32_K (1<<15)
772 #   define PERLSBRK_64_K (1<<16)
773
774 char *
775 Perl_sbrk(size)
776 int size;
777 {
778     IV got;
779     int small, reqsize;
780
781     if (!size) return 0;
782 #ifdef PERL_CORE
783     reqsize = size; /* just for the DEBUG_m statement */
784 #endif
785     if (size <= Perl_sbrk_oldsize) {
786         got = Perl_sbrk_oldchunk;
787         Perl_sbrk_oldchunk += size;
788         Perl_sbrk_oldsize -= size;
789     } else {
790       if (size >= PERLSBRK_32_K) {
791         small = 0;
792       } else {
793 #ifndef PERL_CORE
794         reqsize = size;
795 #endif
796         size = PERLSBRK_64_K;
797         small = 1;
798       }
799       got = (IV)SYSTEM_ALLOC(size);
800       if (small) {
801         /* Chunk is small, register the rest for future allocs. */
802         Perl_sbrk_oldchunk = got + reqsize;
803         Perl_sbrk_oldsize = size - reqsize;
804       }
805     }
806
807 #ifdef PERL_CORE
808     DEBUG_m(PerlIO_printf(PerlIO_stderr(), "sbrk malloc size %ld (reqsize %ld), left size %ld, give addr 0x%lx\n",
809                     size, reqsize, Perl_sbrk_oldsize, got));
810 #endif
811
812     return (void *)got;
813 }
814
815 #endif /* ! defined USE_PERL_SBRK */