6 Here are some notes on configuring Perl's malloc. (For non-perl
9 There are two macros which serve as bulk disablers of advanced
10 features of this malloc: NO_FANCY_MALLOC, PLAIN_MALLOC (undef by
11 default). Look in the list of default values below to understand
12 their exact effect. Defining NO_FANCY_MALLOC returns malloc.c to the
13 state of the malloc in Perl 5.004. Additionally defining PLAIN_MALLOC
14 returns it to the state as of Perl 5.000.
16 Note that some of the settings below may be ignored in the code based
17 on values of other macros. The PERL_CORE symbol is only defined when
18 perl itself is being compiled (so malloc can make some assumptions
19 about perl's facilities being available to it).
21 Each config option has a short description, followed by its name,
22 default value, and a comment about the default (if applicable). Some
23 options take a precise value, while the others are just boolean.
24 The boolean ones are listed first.
26 # Enable code for an emergency memory pool in $^M. See perlvar.pod
27 # for a description of $^M.
28 PERL_EMERGENCY_SBRK (!PLAIN_MALLOC && PERL_CORE)
30 # Enable code for printing memory statistics.
31 DEBUGGING_MSTATS (!PLAIN_MALLOC && PERL_CORE)
33 # Move allocation info for small buckets into separate areas.
34 # Memory optimization (especially for small allocations, of the
35 # less than 64 bytes). Since perl usually makes a large number
36 # of small allocations, this is usually a win.
37 PACK_MALLOC (!PLAIN_MALLOC && !RCHECK)
39 # Add one page to big powers of two when calculating bucket size.
40 # This is targeted at big allocations, as are common in image
42 TWO_POT_OPTIMIZE !PLAIN_MALLOC
44 # Use intermediate bucket sizes between powers-of-two. This is
45 # generally a memory optimization, and a (small) speed pessimization.
46 BUCKETS_ROOT2 !NO_FANCY_MALLOC
48 # Do not check small deallocations for bad free(). Memory
49 # and speed optimization, error reporting pessimization.
50 IGNORE_SMALL_BAD_FREE (!NO_FANCY_MALLOC && !RCHECK)
52 # Use table lookup to decide in which bucket a given allocation will go.
53 SMALL_BUCKET_VIA_TABLE !NO_FANCY_MALLOC
55 # Use a perl-defined sbrk() instead of the (presumably broken or
56 # missing) system-supplied sbrk().
59 # Use system malloc() (or calloc() etc.) to emulate sbrk(). Normally
60 # only used with broken sbrk()s.
61 PERL_SBRK_VIA_MALLOC undef
63 # Which allocator to use if PERL_SBRK_VIA_MALLOC
64 SYSTEM_ALLOC(a) malloc(a)
66 # Disable memory overwrite checking with DEBUGGING. Memory and speed
67 # optimization, error reporting pessimization.
70 # Enable memory overwrite checking with DEBUGGING. Memory and speed
71 # pessimization, error reporting optimization
72 RCHECK (DEBUGGING && !NO_RCHECK)
74 # Failed allocations bigger than this size croak (if
75 # PERL_EMERGENCY_SBRK is enabled) without touching $^M. See
76 # perlvar.pod for a description of $^M.
77 BIG_SIZE (1<<16) # 64K
79 # Starting from this power of two, add an extra page to the
80 # size of the bucket. This enables optimized allocations of sizes
81 # close to powers of 2. Note that the value is indexed at 0.
82 FIRST_BIG_POW2 15 # 32K, 16K is used too often
84 # Estimate of minimal memory footprint. malloc uses this value to
85 # request the most reasonable largest blocks of memory from the system.
88 # Round up sbrk()s to multiples of this.
91 # Round up sbrk()s to multiples of this percent of footprint.
94 # Add this much memory to big powers of two to get the bucket size.
97 # This many sbrk() discontinuities should be tolerated even
98 # from the start without deciding that sbrk() is usually
100 SBRK_ALLOW_FAILURES 3
102 # This many continuous sbrk()s compensate for one discontinuous one.
103 SBRK_FAILURE_PRICE 50
105 # Some configurations may ask for 12-byte-or-so allocations which
106 # require 8-byte alignment (?!). In such situation one needs to
107 # define this to disable 12-byte bucket (will increase memory footprint)
108 STRICT_ALIGNMENT undef
110 This implementation assumes that calling PerlIO_printf() does not
111 result in any memory allocation calls (used during a panic).
116 If used outside of Perl environment, it may be useful to redefine
117 the following macros (listed below with defaults):
119 # Type of address returned by allocation functions
122 # Type of size argument for allocation functions
123 MEM_SIZE unsigned long
125 # Maximal value in LONG
128 # Unsigned integer type big enough to keep a pointer
131 # Type of pointer with 1-byte granularity
134 # Type returned by free()
137 # Fatal error reporting function
138 croak(format, arg) warn(idem) + exit(1)
140 # Error reporting function
141 warn(format, arg) fprintf(stderr, idem)
143 # Locking/unlocking for MT operation
144 MALLOC_LOCK MUTEX_LOCK(&PL_malloc_mutex)
145 MALLOC_UNLOCK MUTEX_UNLOCK(&PL_malloc_mutex)
147 # Locking/unlocking mutex for MT operation
152 #ifndef NO_FANCY_MALLOC
153 # ifndef SMALL_BUCKET_VIA_TABLE
154 # define SMALL_BUCKET_VIA_TABLE
156 # ifndef BUCKETS_ROOT2
157 # define BUCKETS_ROOT2
159 # ifndef IGNORE_SMALL_BAD_FREE
160 # define IGNORE_SMALL_BAD_FREE
164 #ifndef PLAIN_MALLOC /* Bulk enable features */
168 # ifndef TWO_POT_OPTIMIZE
169 # define TWO_POT_OPTIMIZE
171 # if defined(PERL_CORE) && !defined(PERL_EMERGENCY_SBRK)
172 # define PERL_EMERGENCY_SBRK
174 # if defined(PERL_CORE) && !defined(DEBUGGING_MSTATS)
175 # define DEBUGGING_MSTATS
179 #define MIN_BUC_POW2 (sizeof(void*) > 4 ? 3 : 2) /* Allow for 4-byte arena. */
180 #define MIN_BUCKET (MIN_BUC_POW2 * BUCKETS_PER_POW2)
182 #if !(defined(I286) || defined(atarist))
183 /* take 2k unless the block is bigger than that */
184 # define LOG_OF_MIN_ARENA 11
186 /* take 16k unless the block is bigger than that
187 (80286s like large segments!), probably good on the atari too */
188 # define LOG_OF_MIN_ARENA 14
192 # if defined(DEBUGGING) && !defined(NO_RCHECK)
195 # if defined(RCHECK) && defined(IGNORE_SMALL_BAD_FREE)
196 # undef IGNORE_SMALL_BAD_FREE
199 * malloc.c (Caltech) 2/21/82
200 * Chris Kingsley, kingsley@cit-20.
202 * This is a very fast storage allocator. It allocates blocks of a small
203 * number of different sizes, and keeps free lists of each size. Blocks that
204 * don't exactly fit are passed up to the next larger size. In this
205 * implementation, the available sizes are 2^n-4 (or 2^n-12) bytes long.
206 * If PACK_MALLOC is defined, small blocks are 2^n bytes long.
207 * This is designed for use in a program that uses vast quantities of memory,
208 * but bombs when it runs out.
210 * Modifications Copyright Ilya Zakharevich 1996-98.
212 * Still very quick, but much more thrifty. (Std config is 10% slower
213 * than it was, and takes 67% of old heap size for typical usage.)
215 * Allocations of small blocks are now table-driven to many different
216 * buckets. Sizes of really big buckets are increased to accomodata
217 * common size=power-of-2 blocks. Running-out-of-memory is made into
218 * an exception. Deeply configurable and thread-safe.
227 # include "../EXTERN.h"
228 # include "../perl.h"
235 # define Malloc_t void *
238 # define MEM_SIZE unsigned long
241 # define LONG_MAX 0x7FFFFFFF
244 # define UV unsigned long
247 # define caddr_t char *
252 # define Copy(s,d,n,t) (void)memcpy((char*)(d),(char*)(s), (n) * sizeof(t))
253 # define PerlEnv_getenv getenv
254 # define PerlIO_printf fprintf
255 # define PerlIO_stderr() stderr
257 # ifndef croak /* make depend */
258 # define croak(mess, arg) (warn((mess), (arg)), exit(1))
261 # define warn(mess, arg) fprintf(stderr, (mess), (arg))
273 # define MUTEX_LOCK(l)
277 # define MUTEX_UNLOCK(l)
281 # define MALLOC_LOCK MUTEX_LOCK(&PL_malloc_mutex)
284 #ifndef MALLOC_UNLOCK
285 # define MALLOC_UNLOCK MUTEX_UNLOCK(&PL_malloc_mutex)
290 # define DEBUG_m(a) if (PL_debug & 128) a
296 * The memory is broken into "blocks" which occupy multiples of 2K (and
297 * generally speaking, have size "close" to a power of 2). The addresses
298 * of such *unused* blocks are kept in nextf[i] with big enough i. (nextf
299 * is an array of linked lists.) (Addresses of used blocks are not known.)
301 * Moreover, since the algorithm may try to "bite" smaller blocks of out
302 * of unused bigger ones, there are also regions of "irregular" size,
303 * managed separately, by a linked list chunk_chain.
305 * The third type of storage is the sbrk()ed-but-not-yet-used space, its
306 * end and size are kept in last_sbrk_top and sbrked_remains.
308 * Growing blocks "in place":
309 * ~~~~~~~~~~~~~~~~~~~~~~~~~
310 * The address of the block with the greatest address is kept in last_op
311 * (if not known, last_op is 0). If it is known that the memory above
312 * last_op is not continuous, or contains a chunk from chunk_chain,
313 * last_op is set to 0.
315 * The chunk with address last_op may be grown by expanding into
316 * sbrk()ed-but-not-yet-used space, or trying to sbrk() more continuous
319 * Management of last_op:
320 * ~~~~~~~~~~~~~~~~~~~~~
322 * free() never changes the boundaries of blocks, so is not relevant.
324 * The only way realloc() may change the boundaries of blocks is if it
325 * grows a block "in place". However, in the case of success such a
326 * chunk is automatically last_op, and it remains last_op. In the case
327 * of failure getpages_adjacent() clears last_op.
329 * malloc() may change blocks by calling morecore() only.
331 * morecore() may create new blocks by:
332 * a) biting pieces from chunk_chain (cannot create one above last_op);
333 * b) biting a piece from an unused block (if block was last_op, this
334 * may create a chunk from chain above last_op, thus last_op is
335 * invalidated in such a case).
336 * c) biting of sbrk()ed-but-not-yet-used space. This creates
337 * a block which is last_op.
338 * d) Allocating new pages by calling getpages();
340 * getpages() creates a new block. It marks last_op at the bottom of
341 * the chunk of memory it returns.
343 * Active pages footprint:
344 * ~~~~~~~~~~~~~~~~~~~~~~
345 * Note that we do not need to traverse the lists in nextf[i], just take
346 * the first element of this list. However, we *need* to traverse the
347 * list in chunk_chain, but most the time it should be a very short one,
348 * so we do not step on a lot of pages we are not going to use.
352 * get_from_bigger_buckets(): forget to increment price => Quite
356 /* I don't much care whether these are defined in sys/types.h--LAW */
358 #define u_char unsigned char
359 #define u_int unsigned int
362 # define u_bigint UV /* Needs to eat *void. */
364 # define u_bigint unsigned long /* Needs to eat *void. */
367 #define u_short unsigned short
369 /* 286 and atarist like big chunks, which gives too much overhead. */
370 #if (defined(RCHECK) || defined(I286) || defined(atarist)) && defined(PACK_MALLOC)
375 * The description below is applicable if PACK_MALLOC is not defined.
377 * The overhead on a block is at least 4 bytes. When free, this space
378 * contains a pointer to the next free block, and the bottom two bits must
379 * be zero. When in use, the first byte is set to MAGIC, and the second
380 * byte is the size index. The remaining bytes are for alignment.
381 * If range checking is enabled and the size of the block fits
382 * in two bytes, then the top two bytes hold the size of the requested block
383 * plus the range checking words, and the header word MINUS ONE.
386 union overhead *ov_next; /* when free */
387 #if MEM_ALIGNBYTES > 4
388 double strut; /* alignment problems */
391 u_char ovu_magic; /* magic number */
392 u_char ovu_index; /* bucket # */
394 u_short ovu_size; /* actual block size */
395 u_int ovu_rmagic; /* range magic number */
398 #define ov_magic ovu.ovu_magic
399 #define ov_index ovu.ovu_index
400 #define ov_size ovu.ovu_size
401 #define ov_rmagic ovu.ovu_rmagic
405 static void botch _((char *diag, char *s));
407 static void morecore _((int bucket));
408 static int findbucket _((union overhead *freep, int srchlen));
409 static void add_to_chain(void *p, MEM_SIZE size, MEM_SIZE chip);
411 #define MAGIC 0xff /* magic # on accounting info */
412 #define RMAGIC 0x55555555 /* magic # on range info */
413 #define RMAGIC_C 0x55 /* magic # on range info */
416 # define RSLOP sizeof (u_int)
417 # ifdef TWO_POT_OPTIMIZE
418 # define MAX_SHORT_BUCKET (12 * BUCKETS_PER_POW2)
420 # define MAX_SHORT_BUCKET (13 * BUCKETS_PER_POW2)
426 #if !defined(PACK_MALLOC) && defined(BUCKETS_ROOT2)
427 # undef BUCKETS_ROOT2
431 # define BUCKET_TABLE_SHIFT 2
432 # define BUCKET_POW2_SHIFT 1
433 # define BUCKETS_PER_POW2 2
435 # define BUCKET_TABLE_SHIFT MIN_BUC_POW2
436 # define BUCKET_POW2_SHIFT 0
437 # define BUCKETS_PER_POW2 1
440 #if !defined(MEM_ALIGNBYTES) || ((MEM_ALIGNBYTES > 4) && !defined(STRICT_ALIGNMENT))
441 /* Figure out the alignment of void*. */
446 # define ALIGN_SMALL ((int)((caddr_t)&(((struct aligner*)0)->p)))
448 # define ALIGN_SMALL MEM_ALIGNBYTES
451 #define IF_ALIGN_8(yes,no) ((ALIGN_SMALL>4) ? (yes) : (no))
454 # define MAX_BUCKET_BY_TABLE 13
455 static u_short buck_size[MAX_BUCKET_BY_TABLE + 1] =
457 0, 0, 0, 0, 4, 4, 8, 12, 16, 24, 32, 48, 64, 80,
459 # define BUCKET_SIZE(i) ((i) % 2 ? buck_size[i] : (1 << ((i) >> BUCKET_POW2_SHIFT)))
460 # define BUCKET_SIZE_REAL(i) ((i) <= MAX_BUCKET_BY_TABLE \
462 : ((1 << ((i) >> BUCKET_POW2_SHIFT)) \
464 + POW2_OPTIMIZE_SURPLUS(i)))
466 # define BUCKET_SIZE(i) (1 << ((i) >> BUCKET_POW2_SHIFT))
467 # define BUCKET_SIZE_REAL(i) (BUCKET_SIZE(i) - MEM_OVERHEAD(i) + POW2_OPTIMIZE_SURPLUS(i))
472 /* In this case it is assumed that if we do sbrk() in 2K units, we
473 * will get 2K aligned arenas (at least after some initial
474 * alignment). The bucket number of the given subblock is on the start
475 * of 2K arena which contains the subblock. Several following bytes
476 * contain the magic numbers for the subblocks in the block.
478 * Sizes of chunks are powers of 2 for chunks in buckets <=
479 * MAX_PACKED, after this they are (2^n - sizeof(union overhead)) (to
480 * get alignment right).
482 * Consider an arena for 2^n with n>MAX_PACKED. We suppose that
483 * starts of all the chunks in a 2K arena are in different
484 * 2^n-byte-long chunks. If the top of the last chunk is aligned on a
485 * boundary of 2K block, this means that sizeof(union
486 * overhead)*"number of chunks" < 2^n, or sizeof(union overhead)*2K <
487 * 4^n, or n > 6 + log2(sizeof()/2)/2, since a chunk of size 2^n -
488 * overhead is used. Since this rules out n = 7 for 8 byte alignment,
489 * we specialcase allocation of the first of 16 128-byte-long chunks.
491 * Note that with the above assumption we automatically have enough
492 * place for MAGIC at the start of 2K block. Note also that we
493 * overlay union overhead over the chunk, thus the start of small chunks
494 * is immediately overwritten after freeing. */
495 # define MAX_PACKED_POW2 6
496 # define MAX_PACKED (MAX_PACKED_POW2 * BUCKETS_PER_POW2 + BUCKET_POW2_SHIFT)
497 # define MAX_POW2_ALGO ((1<<(MAX_PACKED_POW2 + 1)) - M_OVERHEAD)
498 # define TWOK_MASK ((1<<LOG_OF_MIN_ARENA) - 1)
499 # define TWOK_MASKED(x) ((u_bigint)(x) & ~TWOK_MASK)
500 # define TWOK_SHIFT(x) ((u_bigint)(x) & TWOK_MASK)
501 # define OV_INDEXp(block) ((u_char*)(TWOK_MASKED(block)))
502 # define OV_INDEX(block) (*OV_INDEXp(block))
503 # define OV_MAGIC(block,bucket) (*(OV_INDEXp(block) + \
504 (TWOK_SHIFT(block)>> \
505 (bucket>>BUCKET_POW2_SHIFT)) + \
506 (bucket >= MIN_NEEDS_SHIFT ? 1 : 0)))
507 /* A bucket can have a shift smaller than it size, we need to
508 shift its magic number so it will not overwrite index: */
509 # ifdef BUCKETS_ROOT2
510 # define MIN_NEEDS_SHIFT (7*BUCKETS_PER_POW2 - 1) /* Shift 80 greater than chunk 64. */
512 # define MIN_NEEDS_SHIFT (7*BUCKETS_PER_POW2) /* Shift 128 greater than chunk 32. */
514 # define CHUNK_SHIFT 0
516 /* Number of active buckets of given ordinal. */
517 #ifdef IGNORE_SMALL_BAD_FREE
518 #define FIRST_BUCKET_WITH_CHECK (6 * BUCKETS_PER_POW2) /* 64 */
519 # define N_BLKS(bucket) ( (bucket) < FIRST_BUCKET_WITH_CHECK \
520 ? ((1<<LOG_OF_MIN_ARENA) - 1)/BUCKET_SIZE(bucket) \
523 # define N_BLKS(bucket) n_blks[bucket]
526 static u_short n_blks[LOG_OF_MIN_ARENA * BUCKETS_PER_POW2] =
528 # if BUCKETS_PER_POW2==1
530 (MIN_BUC_POW2==2 ? 384 : 0),
531 224, 120, 62, 31, 16, 8, 4, 2
534 (MIN_BUC_POW2==2 ? 384 : 0), (MIN_BUC_POW2==2 ? 384 : 0), /* 4, 4 */
535 224, 149, 120, 80, 62, 41, 31, 25, 16, 16, 8, 8, 4, 4, 2, 2
539 /* Shift of the first bucket with the given ordinal inside 2K chunk. */
540 #ifdef IGNORE_SMALL_BAD_FREE
541 # define BLK_SHIFT(bucket) ( (bucket) < FIRST_BUCKET_WITH_CHECK \
542 ? ((1<<LOG_OF_MIN_ARENA) \
543 - BUCKET_SIZE(bucket) * N_BLKS(bucket)) \
546 # define BLK_SHIFT(bucket) blk_shift[bucket]
549 static u_short blk_shift[LOG_OF_MIN_ARENA * BUCKETS_PER_POW2] =
551 # if BUCKETS_PER_POW2==1
553 (MIN_BUC_POW2==2 ? 512 : 0),
554 256, 128, 64, 64, /* 8 to 64 */
555 16*sizeof(union overhead),
556 8*sizeof(union overhead),
557 4*sizeof(union overhead),
558 2*sizeof(union overhead),
561 (MIN_BUC_POW2==2 ? 512 : 0), (MIN_BUC_POW2==2 ? 512 : 0),
562 256, 260, 128, 128, 64, 80, 64, 48, /* 8 to 96 */
563 16*sizeof(union overhead), 16*sizeof(union overhead),
564 8*sizeof(union overhead), 8*sizeof(union overhead),
565 4*sizeof(union overhead), 4*sizeof(union overhead),
566 2*sizeof(union overhead), 2*sizeof(union overhead),
570 #else /* !PACK_MALLOC */
572 # define OV_MAGIC(block,bucket) (block)->ov_magic
573 # define OV_INDEX(block) (block)->ov_index
574 # define CHUNK_SHIFT 1
575 # define MAX_PACKED -1
576 #endif /* !PACK_MALLOC */
578 #define M_OVERHEAD (sizeof(union overhead) + RSLOP)
581 # define MEM_OVERHEAD(bucket) \
582 (bucket <= MAX_PACKED ? 0 : M_OVERHEAD)
583 # ifdef SMALL_BUCKET_VIA_TABLE
584 # define START_SHIFTS_BUCKET ((MAX_PACKED_POW2 + 1) * BUCKETS_PER_POW2)
585 # define START_SHIFT MAX_PACKED_POW2
586 # ifdef BUCKETS_ROOT2 /* Chunks of size 3*2^n. */
587 # define SIZE_TABLE_MAX 80
589 # define SIZE_TABLE_MAX 64
591 static char bucket_of[] =
593 # ifdef BUCKETS_ROOT2 /* Chunks of size 3*2^n. */
594 /* 0 to 15 in 4-byte increments. */
595 (sizeof(void*) > 4 ? 6 : 5), /* 4/8, 5-th bucket for better reports */
597 IF_ALIGN_8(8,7), 8, /* 16/12, 16 */
598 9, 9, 10, 10, /* 24, 32 */
599 11, 11, 11, 11, /* 48 */
600 12, 12, 12, 12, /* 64 */
601 13, 13, 13, 13, /* 80 */
602 13, 13, 13, 13 /* 80 */
603 # else /* !BUCKETS_ROOT2 */
604 /* 0 to 15 in 4-byte increments. */
605 (sizeof(void*) > 4 ? 3 : 2),
611 # endif /* !BUCKETS_ROOT2 */
613 # else /* !SMALL_BUCKET_VIA_TABLE */
614 # define START_SHIFTS_BUCKET MIN_BUCKET
615 # define START_SHIFT (MIN_BUC_POW2 - 1)
616 # endif /* !SMALL_BUCKET_VIA_TABLE */
617 #else /* !PACK_MALLOC */
618 # define MEM_OVERHEAD(bucket) M_OVERHEAD
619 # ifdef SMALL_BUCKET_VIA_TABLE
620 # undef SMALL_BUCKET_VIA_TABLE
622 # define START_SHIFTS_BUCKET MIN_BUCKET
623 # define START_SHIFT (MIN_BUC_POW2 - 1)
624 #endif /* !PACK_MALLOC */
627 * Big allocations are often of the size 2^n bytes. To make them a
628 * little bit better, make blocks of size 2^n+pagesize for big n.
631 #ifdef TWO_POT_OPTIMIZE
633 # ifndef PERL_PAGESIZE
634 # define PERL_PAGESIZE 4096
636 # ifndef FIRST_BIG_POW2
637 # define FIRST_BIG_POW2 15 /* 32K, 16K is used too often. */
639 # define FIRST_BIG_BLOCK (1<<FIRST_BIG_POW2)
640 /* If this value or more, check against bigger blocks. */
641 # define FIRST_BIG_BOUND (FIRST_BIG_BLOCK - M_OVERHEAD)
642 /* If less than this value, goes into 2^n-overhead-block. */
643 # define LAST_SMALL_BOUND ((FIRST_BIG_BLOCK>>1) - M_OVERHEAD)
645 # define POW2_OPTIMIZE_ADJUST(nbytes) \
646 ((nbytes >= FIRST_BIG_BOUND) ? nbytes -= PERL_PAGESIZE : 0)
647 # define POW2_OPTIMIZE_SURPLUS(bucket) \
648 ((bucket >= FIRST_BIG_POW2 * BUCKETS_PER_POW2) ? PERL_PAGESIZE : 0)
650 #else /* !TWO_POT_OPTIMIZE */
651 # define POW2_OPTIMIZE_ADJUST(nbytes)
652 # define POW2_OPTIMIZE_SURPLUS(bucket) 0
653 #endif /* !TWO_POT_OPTIMIZE */
655 #if defined(HAS_64K_LIMIT) && defined(PERL_CORE)
656 # define BARK_64K_LIMIT(what,nbytes,size) \
657 if (nbytes > 0xffff) { \
658 PerlIO_printf(PerlIO_stderr(), \
659 "%s too large: %lx\n", what, size); \
662 #else /* !HAS_64K_LIMIT || !PERL_CORE */
663 # define BARK_64K_LIMIT(what,nbytes,size)
664 #endif /* !HAS_64K_LIMIT || !PERL_CORE */
667 # define MIN_SBRK 2048
671 # define FIRST_SBRK (48*1024)
674 /* Minimal sbrk in percents of what is already alloced. */
675 #ifndef MIN_SBRK_FRAC
676 # define MIN_SBRK_FRAC 3
679 #ifndef SBRK_ALLOW_FAILURES
680 # define SBRK_ALLOW_FAILURES 3
683 #ifndef SBRK_FAILURE_PRICE
684 # define SBRK_FAILURE_PRICE 50
687 #if defined(PERL_EMERGENCY_SBRK) && defined(PERL_CORE)
690 # define BIG_SIZE (1<<16) /* 64K */
693 #ifdef I_MACH_CTHREADS
695 # define MUTEX_LOCK(m) STMT_START { if (*m) mutex_lock(*m); } STMT_END
697 # define MUTEX_UNLOCK(m) STMT_START { if (*m) mutex_unlock(*m); } STMT_END
700 static char *emergency_buffer;
701 static MEM_SIZE emergency_buffer_size;
702 static Malloc_t emergency_sbrk(MEM_SIZE size);
705 emergency_sbrk(MEM_SIZE size)
707 MEM_SIZE rsize = (((size - 1)>>LOG_OF_MIN_ARENA) + 1)<<LOG_OF_MIN_ARENA;
709 if (size >= BIG_SIZE) {
710 /* Give the possibility to recover: */
712 croak("Out of memory during \"large\" request for %i bytes", size);
715 if (emergency_buffer_size >= rsize) {
716 char *old = emergency_buffer;
718 emergency_buffer_size -= rsize;
719 emergency_buffer += rsize;
723 /* First offense, give a possibility to recover by dieing. */
724 /* No malloc involved here: */
725 GV **gvp = (GV**)hv_fetch(PL_defstash, "^M", 2, 0);
731 if (emergency_buffer_size) {
732 add_to_chain(emergency_buffer, emergency_buffer_size, 0);
733 emergency_buffer_size = 0;
734 emergency_buffer = Nullch;
737 if (!gvp) gvp = (GV**)hv_fetch(PL_defstash, "\015", 1, 0);
738 if (!gvp || !(sv = GvSV(*gvp)) || !SvPOK(sv)
739 || (SvLEN(sv) < (1<<LOG_OF_MIN_ARENA) - M_OVERHEAD)) {
742 return (char *)-1; /* Now die die die... */
744 /* Got it, now detach SvPV: */
746 /* Check alignment: */
747 if (((UV)(pv - sizeof(union overhead))) & ((1<<LOG_OF_MIN_ARENA) - 1)) {
748 PerlIO_puts(PerlIO_stderr(),"Bad alignment of $^M!\n");
749 return (char *)-1; /* die die die */
752 emergency_buffer = pv - sizeof(union overhead);
753 emergency_buffer_size = malloced_size(pv) + M_OVERHEAD;
756 SvCUR(sv) = SvLEN(sv) = 0;
760 croak("Out of memory during request for %i bytes", size);
763 #else /* !(defined(PERL_EMERGENCY_SBRK) && defined(PERL_CORE)) */
764 # define emergency_sbrk(size) -1
765 #endif /* !(defined(PERL_EMERGENCY_SBRK) && defined(PERL_CORE)) */
768 * nextf[i] is the pointer to the next free block of size 2^i. The
769 * smallest allocatable block is 8 bytes. The overhead information
770 * precedes the data area returned to the user.
772 #define NBUCKETS (32*BUCKETS_PER_POW2 + 1)
773 static union overhead *nextf[NBUCKETS];
776 #define sbrk(a) Perl_sbrk(a)
777 Malloc_t Perl_sbrk _((int size));
779 #ifdef DONT_DECLARE_STD
784 extern Malloc_t sbrk(int);
788 #ifdef DEBUGGING_MSTATS
790 * nmalloc[i] is the difference between the number of mallocs and frees
791 * for a given block size.
793 static u_int nmalloc[NBUCKETS];
794 static u_int sbrk_slack;
795 static u_int start_slack;
798 static u_int goodsbrk;
802 #define ASSERT(p,diag) if (!(p)) botch(diag,STRINGIFY(p)); else
804 botch(char *diag, char *s)
806 PerlIO_printf(PerlIO_stderr(), "assertion botched (%s?): %s\n", diag, s);
810 #define ASSERT(p, diag)
814 malloc(register size_t nbytes)
816 register union overhead *p;
818 register MEM_SIZE shiftr;
820 #if defined(DEBUGGING) || defined(RCHECK)
821 MEM_SIZE size = nbytes;
824 BARK_64K_LIMIT("Allocation",nbytes,nbytes);
826 if ((long)nbytes < 0)
827 croak("%s", "panic: malloc");
832 * Convert amount of memory requested into
833 * closest block size stored in hash buckets
834 * which satisfies request. Account for
835 * space used per block for accounting.
838 # ifdef SMALL_BUCKET_VIA_TABLE
841 else if (nbytes <= SIZE_TABLE_MAX) {
842 bucket = bucket_of[(nbytes - 1) >> BUCKET_TABLE_SHIFT];
847 if (nbytes <= MAX_POW2_ALGO) goto do_shifts;
852 POW2_OPTIMIZE_ADJUST(nbytes);
853 nbytes += M_OVERHEAD;
854 nbytes = (nbytes + 3) &~ 3;
856 shiftr = (nbytes - 1) >> START_SHIFT;
857 bucket = START_SHIFTS_BUCKET;
858 /* apart from this loop, this is O(1) */
860 bucket += BUCKETS_PER_POW2;
863 * If nothing in hash bucket right now,
864 * request more memory from the system.
866 if (nextf[bucket] == NULL)
868 if ((p = nextf[bucket]) == NULL) {
872 PerlIO_puts(PerlIO_stderr(),"Out of memory!\n");
880 DEBUG_m(PerlIO_printf(Perl_debug_log,
881 "0x%lx: (%05lu) malloc %ld bytes\n",
882 (unsigned long)(p+1), (unsigned long)(PL_an++),
885 /* remove from linked list */
887 if (((UV)p) & (MEM_ALIGNBYTES - 1))
888 PerlIO_printf(PerlIO_stderr(), "Corrupt malloc ptr 0x%lx at 0x%lx\n",
889 (unsigned long)*((int*)p),(unsigned long)p);
891 nextf[bucket] = p->ov_next;
892 #ifdef IGNORE_SMALL_BAD_FREE
893 if (bucket >= FIRST_BUCKET_WITH_CHECK)
895 OV_MAGIC(p, bucket) = MAGIC;
897 OV_INDEX(p) = bucket;
901 * Record allocated size of block and
902 * bound space with magic numbers.
904 p->ov_rmagic = RMAGIC;
905 if (bucket <= MAX_SHORT_BUCKET) {
908 nbytes = size + M_OVERHEAD;
909 p->ov_size = nbytes - 1;
910 if ((i = nbytes & 3)) {
913 *((char *)((caddr_t)p + nbytes - RSLOP + i)) = RMAGIC_C;
915 nbytes = (nbytes + 3) &~ 3;
916 *((u_int *)((caddr_t)p + nbytes - RSLOP)) = RMAGIC;
920 return ((Malloc_t)(p + CHUNK_SHIFT));
923 static char *last_sbrk_top;
924 static char *last_op; /* This arena can be easily extended. */
925 static int sbrked_remains;
926 static int sbrk_good = SBRK_ALLOW_FAILURES * SBRK_FAILURE_PRICE;
928 #ifdef DEBUGGING_MSTATS
932 struct chunk_chain_s {
933 struct chunk_chain_s *next;
936 static struct chunk_chain_s *chunk_chain;
938 static char max_bucket;
940 /* Cutoff a piece of one of the chunks in the chain. Prefer smaller chunk. */
942 get_from_chain(MEM_SIZE size)
944 struct chunk_chain_s *elt = chunk_chain, **oldp = &chunk_chain;
945 struct chunk_chain_s **oldgoodp = NULL;
946 long min_remain = LONG_MAX;
949 if (elt->size >= size) {
950 long remains = elt->size - size;
951 if (remains >= 0 && remains < min_remain) {
953 min_remain = remains;
959 oldp = &( elt->next );
962 if (!oldgoodp) return NULL;
964 void *ret = *oldgoodp;
965 struct chunk_chain_s *next = (*oldgoodp)->next;
967 *oldgoodp = (struct chunk_chain_s *)((char*)ret + size);
968 (*oldgoodp)->size = min_remain;
969 (*oldgoodp)->next = next;
972 void *ret = *oldgoodp;
973 *oldgoodp = (*oldgoodp)->next;
980 add_to_chain(void *p, MEM_SIZE size, MEM_SIZE chip)
982 struct chunk_chain_s *next = chunk_chain;
986 chunk_chain = (struct chunk_chain_s *)cp;
987 chunk_chain->size = size - chip;
988 chunk_chain->next = next;
993 get_from_bigger_buckets(int bucket, MEM_SIZE size)
996 static int bucketprice[NBUCKETS];
997 while (bucket <= max_bucket) {
998 /* We postpone stealing from bigger buckets until we want it
1000 if (nextf[bucket] && bucketprice[bucket]++ >= price) {
1002 void *ret = (void*)(nextf[bucket] - 1 + CHUNK_SHIFT);
1003 bucketprice[bucket] = 0;
1004 if (((char*)nextf[bucket]) - M_OVERHEAD == last_op) {
1005 last_op = NULL; /* Disable optimization */
1007 nextf[bucket] = nextf[bucket]->ov_next;
1008 #ifdef DEBUGGING_MSTATS
1010 start_slack -= M_OVERHEAD;
1012 add_to_chain(ret, (BUCKET_SIZE(bucket) +
1013 POW2_OPTIMIZE_SURPLUS(bucket)),
1022 static union overhead *
1023 getpages(int needed, int *nblksp, int bucket)
1025 /* Need to do (possibly expensive) system call. Try to
1026 optimize it for rare calling. */
1027 MEM_SIZE require = needed - sbrked_remains;
1029 union overhead *ovp;
1032 if (sbrk_good > 0) {
1033 if (!last_sbrk_top && require < FIRST_SBRK)
1034 require = FIRST_SBRK;
1035 else if (require < MIN_SBRK) require = MIN_SBRK;
1037 if (require < goodsbrk * MIN_SBRK_FRAC / 100)
1038 require = goodsbrk * MIN_SBRK_FRAC / 100;
1039 require = ((require - 1 + MIN_SBRK) / MIN_SBRK) * MIN_SBRK;
1046 DEBUG_m(PerlIO_printf(Perl_debug_log,
1047 "sbrk(%ld) for %ld-byte-long arena\n",
1048 (long)require, (long) needed));
1049 cp = (char *)sbrk(require);
1050 #ifdef DEBUGGING_MSTATS
1053 if (cp == last_sbrk_top) {
1054 /* Common case, anything is fine. */
1056 ovp = (union overhead *) (cp - sbrked_remains);
1057 last_op = cp - sbrked_remains;
1058 sbrked_remains = require - (needed - sbrked_remains);
1059 } else if (cp == (char *)-1) { /* no more room! */
1060 ovp = (union overhead *)emergency_sbrk(needed);
1061 if (ovp == (union overhead *)-1)
1063 if (((char*)ovp) > last_op) { /* Cannot happen with current emergency_sbrk() */
1067 } else { /* Non-continuous or first sbrk(). */
1068 long add = sbrked_remains;
1071 if (sbrked_remains) { /* Put rest into chain, we
1072 cannot use it right now. */
1073 add_to_chain((void*)(last_sbrk_top - sbrked_remains),
1077 /* Second, check alignment. */
1080 #ifndef atarist /* on the atari we dont have to worry about this */
1081 # ifndef I286 /* The sbrk(0) call on the I286 always returns the next segment */
1083 /* CHUNK_SHIFT is 1 for PACK_MALLOC, 0 otherwise. */
1084 if ((UV)cp & (0x7FF >> CHUNK_SHIFT)) { /* Not aligned. */
1085 slack = (0x800 >> CHUNK_SHIFT)
1086 - ((UV)cp & (0x7FF >> CHUNK_SHIFT));
1090 #endif /* atarist */
1093 DEBUG_m(PerlIO_printf(Perl_debug_log,
1094 "sbrk(%ld) to fix non-continuous/off-page sbrk:\n\t%ld for alignement,\t%ld were assumed to come from the tail of the previous sbrk\n",
1095 (long)add, (long) slack,
1096 (long) sbrked_remains));
1097 newcp = (char *)sbrk(add);
1098 #if defined(DEBUGGING_MSTATS)
1102 if (newcp != cp + require) {
1103 /* Too bad: even rounding sbrk() is not continuous.*/
1104 DEBUG_m(PerlIO_printf(Perl_debug_log,
1105 "failed to fix bad sbrk()\n"));
1109 croak("%s", "panic: Off-page sbrk");
1112 if (sbrked_remains) {
1114 #if defined(DEBUGGING_MSTATS)
1115 sbrk_slack += require;
1118 DEBUG_m(PerlIO_printf(Perl_debug_log,
1119 "straight sbrk(%ld)\n",
1121 cp = (char *)sbrk(require);
1122 #ifdef DEBUGGING_MSTATS
1125 if (cp == (char *)-1)
1128 sbrk_good = -1; /* Disable optimization!
1129 Continue with not-aligned... */
1132 require += sbrked_remains;
1136 if (last_sbrk_top) {
1137 sbrk_good -= SBRK_FAILURE_PRICE;
1140 ovp = (union overhead *) cp;
1142 * Round up to minimum allocation size boundary
1143 * and deduct from block count to reflect.
1146 #ifndef I286 /* Again, this should always be ok on an 80286 */
1148 ovp = (union overhead *)(((UV)ovp + 8) & ~7);
1149 DEBUG_m(PerlIO_printf(Perl_debug_log,
1150 "fixing sbrk(): %d bytes off machine alignement\n",
1151 (int)((UV)ovp & 7)));
1153 # if defined(DEBUGGING_MSTATS)
1154 /* This is only approx. if TWO_POT_OPTIMIZE: */
1155 sbrk_slack += (1 << bucket);
1159 sbrked_remains = require - needed;
1162 last_sbrk_top = cp + require;
1163 #ifdef DEBUGGING_MSTATS
1164 goodsbrk += require;
1170 getpages_adjacent(int require)
1172 if (require <= sbrked_remains) {
1173 sbrked_remains -= require;
1177 require -= sbrked_remains;
1178 /* We do not try to optimize sbrks here, we go for place. */
1179 cp = (char*) sbrk(require);
1180 #ifdef DEBUGGING_MSTATS
1182 goodsbrk += require;
1184 if (cp == last_sbrk_top) {
1186 last_sbrk_top = cp + require;
1188 if (cp == (char*)-1) { /* Out of memory */
1189 #ifdef DEBUGGING_MSTATS
1190 goodsbrk -= require;
1194 /* Report the failure: */
1196 add_to_chain((void*)(last_sbrk_top - sbrked_remains),
1198 add_to_chain((void*)cp, require, 0);
1199 sbrk_good -= SBRK_FAILURE_PRICE;
1211 * Allocate more memory to the indicated bucket.
1214 morecore(register int bucket)
1216 register union overhead *ovp;
1217 register int rnu; /* 2^rnu bytes will be requested */
1218 int nblks; /* become nblks blocks of the desired size */
1219 register MEM_SIZE siz, needed;
1223 if (bucket == sizeof(MEM_SIZE)*8*BUCKETS_PER_POW2) {
1225 croak("%s", "Out of memory during ridiculously large request");
1227 if (bucket > max_bucket)
1228 max_bucket = bucket;
1230 rnu = ( (bucket <= (LOG_OF_MIN_ARENA << BUCKET_POW2_SHIFT))
1232 : (bucket >> BUCKET_POW2_SHIFT) );
1233 /* This may be overwritten later: */
1234 nblks = 1 << (rnu - (bucket >> BUCKET_POW2_SHIFT)); /* how many blocks to get */
1235 needed = ((MEM_SIZE)1 << rnu) + POW2_OPTIMIZE_SURPLUS(bucket);
1236 if (nextf[rnu << BUCKET_POW2_SHIFT]) { /* 2048b bucket. */
1237 ovp = nextf[rnu << BUCKET_POW2_SHIFT] - 1 + CHUNK_SHIFT;
1238 nextf[rnu << BUCKET_POW2_SHIFT]
1239 = nextf[rnu << BUCKET_POW2_SHIFT]->ov_next;
1240 #ifdef DEBUGGING_MSTATS
1241 nmalloc[rnu << BUCKET_POW2_SHIFT]--;
1242 start_slack -= M_OVERHEAD;
1244 DEBUG_m(PerlIO_printf(Perl_debug_log,
1245 "stealing %ld bytes from %ld arena\n",
1246 (long) needed, (long) rnu << BUCKET_POW2_SHIFT));
1247 } else if (chunk_chain
1248 && (ovp = (union overhead*) get_from_chain(needed))) {
1249 DEBUG_m(PerlIO_printf(Perl_debug_log,
1250 "stealing %ld bytes from chain\n",
1252 } else if ( (ovp = (union overhead*)
1253 get_from_bigger_buckets((rnu << BUCKET_POW2_SHIFT) + 1,
1255 DEBUG_m(PerlIO_printf(Perl_debug_log,
1256 "stealing %ld bytes from bigger buckets\n",
1258 } else if (needed <= sbrked_remains) {
1259 ovp = (union overhead *)(last_sbrk_top - sbrked_remains);
1260 sbrked_remains -= needed;
1261 last_op = (char*)ovp;
1263 ovp = getpages(needed, &nblks, bucket);
1269 * Add new memory allocated to that on
1270 * free list for this hash bucket.
1272 siz = BUCKET_SIZE(bucket);
1274 *(u_char*)ovp = bucket; /* Fill index. */
1275 if (bucket <= MAX_PACKED) {
1276 ovp = (union overhead *) ((char*)ovp + BLK_SHIFT(bucket));
1277 nblks = N_BLKS(bucket);
1278 # ifdef DEBUGGING_MSTATS
1279 start_slack += BLK_SHIFT(bucket);
1281 } else if (bucket < LOG_OF_MIN_ARENA * BUCKETS_PER_POW2) {
1282 ovp = (union overhead *) ((char*)ovp + BLK_SHIFT(bucket));
1283 siz -= sizeof(union overhead);
1284 } else ovp++; /* One chunk per block. */
1285 #endif /* PACK_MALLOC */
1286 nextf[bucket] = ovp;
1287 #ifdef DEBUGGING_MSTATS
1288 nmalloc[bucket] += nblks;
1289 if (bucket > MAX_PACKED) {
1290 start_slack += M_OVERHEAD * nblks;
1293 while (--nblks > 0) {
1294 ovp->ov_next = (union overhead *)((caddr_t)ovp + siz);
1295 ovp = (union overhead *)((caddr_t)ovp + siz);
1297 /* Not all sbrks return zeroed memory.*/
1298 ovp->ov_next = (union overhead *)NULL;
1300 if (bucket == 7*BUCKETS_PER_POW2) { /* Special case, explanation is above. */
1301 union overhead *n_op = nextf[7*BUCKETS_PER_POW2]->ov_next;
1302 nextf[7*BUCKETS_PER_POW2] =
1303 (union overhead *)((caddr_t)nextf[7*BUCKETS_PER_POW2]
1304 - sizeof(union overhead));
1305 nextf[7*BUCKETS_PER_POW2]->ov_next = n_op;
1307 #endif /* !PACK_MALLOC */
1313 register MEM_SIZE size;
1314 register union overhead *ovp;
1315 char *cp = (char*)mp;
1320 DEBUG_m(PerlIO_printf(Perl_debug_log,
1321 "0x%lx: (%05lu) free\n",
1322 (unsigned long)cp, (unsigned long)(PL_an++)));
1326 ovp = (union overhead *)((caddr_t)cp
1327 - sizeof (union overhead) * CHUNK_SHIFT);
1329 bucket = OV_INDEX(ovp);
1331 #ifdef IGNORE_SMALL_BAD_FREE
1332 if ((bucket >= FIRST_BUCKET_WITH_CHECK)
1333 && (OV_MAGIC(ovp, bucket) != MAGIC))
1335 if (OV_MAGIC(ovp, bucket) != MAGIC)
1338 static int bad_free_warn = -1;
1339 if (bad_free_warn == -1) {
1340 char *pbf = PerlEnv_getenv("PERL_BADFREE");
1341 bad_free_warn = (pbf) ? atoi(pbf) : 1;
1346 warn("%s free() ignored",
1347 ovp->ov_rmagic == RMAGIC - 1 ? "Duplicate" : "Bad");
1349 warn("%s", "Bad free() ignored");
1351 return; /* sanity */
1355 ASSERT(ovp->ov_rmagic == RMAGIC, "chunk's head overwrite");
1356 if (OV_INDEX(ovp) <= MAX_SHORT_BUCKET) {
1358 MEM_SIZE nbytes = ovp->ov_size + 1;
1360 if ((i = nbytes & 3)) {
1363 ASSERT(*((char *)((caddr_t)ovp + nbytes - RSLOP + i))
1364 == RMAGIC_C, "chunk's tail overwrite");
1367 nbytes = (nbytes + 3) &~ 3;
1368 ASSERT(*(u_int *)((caddr_t)ovp + nbytes - RSLOP) == RMAGIC, "chunk's tail overwrite");
1370 ovp->ov_rmagic = RMAGIC - 1;
1372 ASSERT(OV_INDEX(ovp) < NBUCKETS, "chunk's head overwrite");
1373 size = OV_INDEX(ovp);
1374 ovp->ov_next = nextf[size];
1380 * When a program attempts "storage compaction" as mentioned in the
1381 * old malloc man page, it realloc's an already freed block. Usually
1382 * this is the last block it freed; occasionally it might be farther
1383 * back. We have to search all the free lists for the block in order
1384 * to determine its bucket: 1st we make one pass thru the lists
1385 * checking only the first block in each; if that fails we search
1386 * ``reall_srchlen'' blocks in each list for a match (the variable
1387 * is extern so the caller can modify it). If that fails we just copy
1388 * however many bytes was given to realloc() and hope it's not huge.
1390 #define reall_srchlen 4 /* 4 should be plenty, -1 =>'s whole list */
1393 realloc(void *mp, size_t nbytes)
1395 register MEM_SIZE onb;
1396 union overhead *ovp;
1399 register int bucket;
1400 int was_alloced = 0, incr;
1401 char *cp = (char*)mp;
1403 #if defined(DEBUGGING) || !defined(PERL_CORE)
1404 MEM_SIZE size = nbytes;
1406 if ((long)nbytes < 0)
1407 croak("%s", "panic: realloc");
1410 BARK_64K_LIMIT("Reallocation",nbytes,size);
1412 return malloc(nbytes);
1415 ovp = (union overhead *)((caddr_t)cp
1416 - sizeof (union overhead) * CHUNK_SHIFT);
1417 bucket = OV_INDEX(ovp);
1418 #ifdef IGNORE_SMALL_BAD_FREE
1419 if ((bucket < FIRST_BUCKET_WITH_CHECK)
1420 || (OV_MAGIC(ovp, bucket) == MAGIC))
1422 if (OV_MAGIC(ovp, bucket) == MAGIC)
1428 * Already free, doing "compaction".
1430 * Search for the old block of memory on the
1431 * free list. First, check the most common
1432 * case (last element free'd), then (this failing)
1433 * the last ``reall_srchlen'' items free'd.
1434 * If all lookups fail, then assume the size of
1435 * the memory block being realloc'd is the
1436 * smallest possible.
1438 if ((bucket = findbucket(ovp, 1)) < 0 &&
1439 (bucket = findbucket(ovp, reall_srchlen)) < 0)
1442 onb = BUCKET_SIZE_REAL(bucket);
1444 * avoid the copy if same size block.
1445 * We are not agressive with boundary cases. Note that it might
1446 * (for a small number of cases) give false negative if
1447 * both new size and old one are in the bucket for
1448 * FIRST_BIG_POW2, but the new one is near the lower end.
1450 * We do not try to go to 1.5 times smaller bucket so far.
1452 if (nbytes > onb) incr = 1;
1454 #ifdef DO_NOT_TRY_HARDER_WHEN_SHRINKING
1455 if ( /* This is a little bit pessimal if PACK_MALLOC: */
1456 nbytes > ( (onb >> 1) - M_OVERHEAD )
1457 # ifdef TWO_POT_OPTIMIZE
1458 || (bucket == FIRST_BIG_POW2 && nbytes >= LAST_SMALL_BOUND )
1461 #else /* !DO_NOT_TRY_HARDER_WHEN_SHRINKING */
1462 prev_bucket = ( (bucket > MAX_PACKED + 1)
1463 ? bucket - BUCKETS_PER_POW2
1465 if (nbytes > BUCKET_SIZE_REAL(prev_bucket))
1466 #endif /* !DO_NOT_TRY_HARDER_WHEN_SHRINKING */
1471 #ifdef STRESS_REALLOC
1472 || 1 /* always do it the hard way */
1475 else if (incr == 0) {
1479 * Record new allocated size of block and
1480 * bound space with magic numbers.
1482 if (OV_INDEX(ovp) <= MAX_SHORT_BUCKET) {
1483 int i, nb = ovp->ov_size + 1;
1488 ASSERT(*((char *)((caddr_t)ovp + nb - RSLOP + i)) == RMAGIC_C, "chunk's tail overwrite");
1492 ASSERT(*(u_int *)((caddr_t)ovp + nb - RSLOP) == RMAGIC, "chunk's tail overwrite");
1494 * Convert amount of memory requested into
1495 * closest block size stored in hash buckets
1496 * which satisfies request. Account for
1497 * space used per block for accounting.
1499 nbytes += M_OVERHEAD;
1500 ovp->ov_size = nbytes - 1;
1501 if ((i = nbytes & 3)) {
1504 *((char *)((caddr_t)ovp + nbytes - RSLOP + i))
1507 nbytes = (nbytes + 3) &~ 3;
1508 *((u_int *)((caddr_t)ovp + nbytes - RSLOP)) = RMAGIC;
1513 DEBUG_m(PerlIO_printf(Perl_debug_log,
1514 "0x%lx: (%05lu) realloc %ld bytes inplace\n",
1515 (unsigned long)res,(unsigned long)(PL_an++),
1517 } else if (incr == 1 && (cp - M_OVERHEAD == last_op)
1518 && (onb > (1 << LOG_OF_MIN_ARENA))) {
1519 MEM_SIZE require, newarena = nbytes, pow;
1522 POW2_OPTIMIZE_ADJUST(newarena);
1523 newarena = newarena + M_OVERHEAD;
1524 /* newarena = (newarena + 3) &~ 3; */
1525 shiftr = (newarena - 1) >> LOG_OF_MIN_ARENA;
1526 pow = LOG_OF_MIN_ARENA + 1;
1527 /* apart from this loop, this is O(1) */
1528 while (shiftr >>= 1)
1530 newarena = (1 << pow) + POW2_OPTIMIZE_SURPLUS(pow * BUCKETS_PER_POW2);
1531 require = newarena - onb - M_OVERHEAD;
1533 if (getpages_adjacent(require)) {
1534 #ifdef DEBUGGING_MSTATS
1536 nmalloc[pow * BUCKETS_PER_POW2]++;
1538 *(cp - M_OVERHEAD) = pow * BUCKETS_PER_POW2; /* Fill index. */
1545 DEBUG_m(PerlIO_printf(Perl_debug_log,
1546 "0x%lx: (%05lu) realloc %ld bytes the hard way\n",
1547 (unsigned long)cp,(unsigned long)(PL_an++),
1549 if ((res = (char*)malloc(nbytes)) == NULL)
1551 if (cp != res) /* common optimization */
1552 Copy(cp, res, (MEM_SIZE)(nbytes<onb?nbytes:onb), char);
1556 return ((Malloc_t)res);
1560 * Search ``srchlen'' elements of each free list for a block whose
1561 * header starts at ``freep''. If srchlen is -1 search the whole list.
1562 * Return bucket number, or -1 if not found.
1565 findbucket(union overhead *freep, int srchlen)
1567 register union overhead *p;
1570 for (i = 0; i < NBUCKETS; i++) {
1572 for (p = nextf[i]; p && j != srchlen; p = p->ov_next) {
1582 calloc(register size_t elements, register size_t size)
1584 long sz = elements * size;
1585 Malloc_t p = malloc(sz);
1588 memset((void*)p, 0, sz);
1594 malloced_size(void *p)
1596 union overhead *ovp = (union overhead *)
1597 ((caddr_t)p - sizeof (union overhead) * CHUNK_SHIFT);
1598 int bucket = OV_INDEX(ovp);
1600 /* The caller wants to have a complete control over the chunk,
1601 disable the memory checking inside the chunk. */
1602 if (bucket <= MAX_SHORT_BUCKET) {
1603 MEM_SIZE size = BUCKET_SIZE_REAL(bucket);
1604 ovp->ov_size = size + M_OVERHEAD - 1;
1605 *((u_int *)((caddr_t)ovp + size + M_OVERHEAD - RSLOP)) = RMAGIC;
1608 return BUCKET_SIZE_REAL(bucket);
1611 #ifdef DEBUGGING_MSTATS
1613 # ifdef BUCKETS_ROOT2
1614 # define MIN_EVEN_REPORT 6
1616 # define MIN_EVEN_REPORT MIN_BUCKET
1619 * mstats - print out statistics about malloc
1621 * Prints two lines of numbers, one showing the length of the free list
1622 * for each size category, the second showing the number of mallocs -
1623 * frees for each size category.
1626 dump_mstats(char *s)
1629 register union overhead *p;
1630 int topbucket=0, topbucket_ev=0, topbucket_odd=0, totfree=0, total=0;
1631 u_int nfree[NBUCKETS];
1632 int total_chain = 0;
1633 struct chunk_chain_s* nextchain = chunk_chain;
1635 for (i = MIN_BUCKET ; i < NBUCKETS; i++) {
1636 for (j = 0, p = nextf[i]; p; p = p->ov_next, j++)
1639 totfree += nfree[i] * BUCKET_SIZE_REAL(i);
1640 total += nmalloc[i] * BUCKET_SIZE_REAL(i);
1642 i % 2 ? (topbucket_odd = i) : (topbucket_ev = i);
1647 PerlIO_printf(PerlIO_stderr(),
1648 "Memory allocation statistics %s (buckets %ld(%ld)..%ld(%ld)\n",
1650 (long)BUCKET_SIZE_REAL(MIN_BUCKET),
1651 (long)BUCKET_SIZE(MIN_BUCKET),
1652 (long)BUCKET_SIZE_REAL(topbucket), (long)BUCKET_SIZE(topbucket));
1653 PerlIO_printf(PerlIO_stderr(), "%8d free:", totfree);
1654 for (i = MIN_EVEN_REPORT; i <= topbucket; i += BUCKETS_PER_POW2) {
1655 PerlIO_printf(PerlIO_stderr(),
1656 ((i < 8*BUCKETS_PER_POW2 || i == 10*BUCKETS_PER_POW2)
1658 : ((i < 12*BUCKETS_PER_POW2) ? " %3d" : " %d")),
1661 #ifdef BUCKETS_ROOT2
1662 PerlIO_printf(PerlIO_stderr(), "\n\t ");
1663 for (i = MIN_BUCKET + 1; i <= topbucket_odd; i += BUCKETS_PER_POW2) {
1664 PerlIO_printf(PerlIO_stderr(),
1665 ((i < 8*BUCKETS_PER_POW2 || i == 10*BUCKETS_PER_POW2)
1667 : ((i < 12*BUCKETS_PER_POW2) ? " %3d" : " %d")),
1671 PerlIO_printf(PerlIO_stderr(), "\n%8d used:", total - totfree);
1672 for (i = MIN_EVEN_REPORT; i <= topbucket; i += BUCKETS_PER_POW2) {
1673 PerlIO_printf(PerlIO_stderr(),
1674 ((i < 8*BUCKETS_PER_POW2 || i == 10*BUCKETS_PER_POW2)
1676 : ((i < 12*BUCKETS_PER_POW2) ? " %3d" : " %d")),
1677 nmalloc[i] - nfree[i]);
1679 #ifdef BUCKETS_ROOT2
1680 PerlIO_printf(PerlIO_stderr(), "\n\t ");
1681 for (i = MIN_BUCKET + 1; i <= topbucket_odd; i += BUCKETS_PER_POW2) {
1682 PerlIO_printf(PerlIO_stderr(),
1683 ((i < 8*BUCKETS_PER_POW2 || i == 10*BUCKETS_PER_POW2)
1685 : ((i < 12*BUCKETS_PER_POW2) ? " %3d" : " %d")),
1686 nmalloc[i] - nfree[i]);
1690 total_chain += nextchain->size;
1691 nextchain = nextchain->next;
1693 PerlIO_printf(PerlIO_stderr(), "\nTotal sbrk(): %d/%d:%d. Odd ends: pad+heads+chain+tail: %d+%d+%d+%d.\n",
1694 goodsbrk + sbrk_slack, sbrks, sbrk_good, sbrk_slack,
1695 start_slack, total_chain, sbrked_remains);
1699 dump_mstats(char *s)
1706 #ifdef USE_PERL_SBRK
1708 # if defined(__MACHTEN_PPC__) || defined(__NeXT__)
1709 # define PERL_SBRK_VIA_MALLOC
1711 * MachTen's malloc() returns a buffer aligned on a two-byte boundary.
1712 * While this is adequate, it may slow down access to longer data
1713 * types by forcing multiple memory accesses. It also causes
1714 * complaints when RCHECK is in force. So we allocate six bytes
1715 * more than we need to, and return an address rounded up to an
1716 * eight-byte boundary.
1718 * 980701 Dominic Dunlop <domo@computer.org>
1720 # define SYSTEM_ALLOC(a) ((void *)(((unsigned)malloc((a)+6)+6)&~7))
1723 # ifdef PERL_SBRK_VIA_MALLOC
1724 # if defined(HIDEMYMALLOC) || defined(EMBEDMYMALLOC)
1725 # undef malloc /* Expose names that */
1726 # undef calloc /* HIDEMYMALLOC hides */
1730 # include "Error: -DPERL_SBRK_VIA_MALLOC needs -D(HIDE|EMBED)MYMALLOC"
1733 /* it may seem schizophrenic to use perl's malloc and let it call system */
1734 /* malloc, the reason for that is only the 3.2 version of the OS that had */
1735 /* frequent core dumps within nxzonefreenolock. This sbrk routine put an */
1736 /* end to the cores */
1738 # ifndef SYSTEM_ALLOC
1739 # define SYSTEM_ALLOC(a) malloc(a)
1742 # endif /* PERL_SBRK_VIA_MALLOC */
1744 static IV Perl_sbrk_oldchunk;
1745 static long Perl_sbrk_oldsize;
1747 # define PERLSBRK_32_K (1<<15)
1748 # define PERLSBRK_64_K (1<<16)
1756 if (!size) return 0;
1758 reqsize = size; /* just for the DEBUG_m statement */
1761 size = (size + 0x7ff) & ~0x7ff;
1763 if (size <= Perl_sbrk_oldsize) {
1764 got = Perl_sbrk_oldchunk;
1765 Perl_sbrk_oldchunk += size;
1766 Perl_sbrk_oldsize -= size;
1768 if (size >= PERLSBRK_32_K) {
1771 size = PERLSBRK_64_K;
1774 got = (IV)SYSTEM_ALLOC(size);
1776 got = (got + 0x7ff) & ~0x7ff;
1779 /* Chunk is small, register the rest for future allocs. */
1780 Perl_sbrk_oldchunk = got + reqsize;
1781 Perl_sbrk_oldsize = size - reqsize;
1785 DEBUG_m(PerlIO_printf(Perl_debug_log, "sbrk malloc size %ld (reqsize %ld), left size %ld, give addr 0x%lx\n",
1786 size, reqsize, Perl_sbrk_oldsize, got));
1791 #endif /* ! defined USE_PERL_SBRK */