6 TEST_STDERR_LOG=/tmp/dbictest.stderr
7 TIMEOUT_CMD="/usr/bin/timeout --kill-after=16m --signal=TERM 15m"
9 echo_err() { echo "$@" 1>&2 ; }
11 if [[ "$TRAVIS" != "true" ]] ; then
12 echo_err "Running this script makes no sense outside of travis-ci"
16 tstamp() { echo -n "[$(date '+%H:%M:%S')]" ; }
20 ========================== CI System information ============================
23 $(perl -0777 -p -e 's/.+\n\n(?!\z)//s' < /proc/cpuinfo)
36 = Network Configuration
39 = Network Sockets Status
40 $( (sudo netstat -an46p || netstat -an46p) | grep -Pv '\s(CLOSING|(FIN|TIME|CLOSE)_WAIT.?|LAST_ACK)\s')
46 $(env | grep -P 'TEST|HARNESS|MAKE|TRAVIS|PERL|DBIC' | LC_ALL=C sort | cat -v)
50 ============================================================================="
54 echo_err -n "$(tstamp) $1 ... "
60 PRMETER_PIDFILE="$(tempfile)_$SECONDS"
61 # the double bash is to hide the job control messages
62 bash -c "bash -c 'echo \$\$ >> $PRMETER_PIDFILE; while true; do sleep 10; echo -n \"\${SECONDS}s ... \"; done' &"
64 LASTOUT=$( eval "$2" 2>&1 ) || LASTEXIT=$?
67 for p in $(cat "$PRMETER_PIDFILE"); do kill $p ; done
69 DELTA_TIME=$(( $SECONDS - $START_TIME ))
71 if [[ "$LASTEXIT" != "0" ]] ; then
72 if [[ -z "$3" ]] ; then
73 echo_err "FAILED !!! (after ${DELTA_TIME}s)"
74 echo_err "Command executed:"
76 echo_err "STDOUT+STDERR:"
82 echo_err "done (took ${DELTA_TIME}s)"
90 run_or_err "Installing Debian APT packages: $pkgs" "sudo apt-get install --allow-unauthenticated --no-install-recommends -y $pkgs"
94 # once --verbose is set, --no-verbose can't disable it
96 local PERL_CPANM_OPT="$( echo $PERL_CPANM_OPT | sed 's/--verbose\s*//' )"
100 COMBINED_OUT="$( { stdout="$(cpanm --quiet --scandeps --format tree "$@")" ; } 2>&1; echo "!!!STDERRSTDOUTSEPARATOR!!!$stdout")" \
103 OUT=${COMBINED_OUT#*!!!STDERRSTDOUTSEPARATOR!!!}
104 ERR=${COMBINED_OUT%!!!STDERRSTDOUTSEPARATOR!!!*}
106 if [[ "$LASTEXIT" != "0" ]] ; then
107 echo_err "Error occured (exit code $LASTEXIT) retrieving dependencies of $@:"
113 # throw away warnings, up-to-date diag, ascii art, convert to modnames
115 s/^.*?is up to date.*$//;
118 s/\-[^\-]+$/ /; # strip version part
122 # throw away what was in $@
124 PQ=$( perl -p -e 's/(?:\s|^)\Q'"$m"'\E(?:\s|$)/ /mg' <<< "$PQ")
131 parallel_installdeps_notest() {
132 if [[ -z "$@" ]] ; then return; fi
134 # one module spec per line
135 MODLIST="$(printf '%s\n' "$@" | sort -R)"
137 # We want to trap the output of each process and serially append them to
138 # each other as opposed to just dumping a jumbled up mass-log that would
139 # need careful unpicking by a human
141 # While cpanm does maintain individual buildlogs in more recent versions,
142 # we are not terribly interested in trying to figure out which log is which
143 # dist. The verbose-output + trap STDIO technique is vastly superior in this
146 # Explanation of inline args:
148 # [09:38] <T> you need a $0
149 # [09:38] <G> hence the _
150 # [09:38] <G> bash -c '...' _
151 # [09:39] <T> I like -- because it's the magic that gnu getopts uses for somethign else
152 # [09:39] <G> or --, yes
153 # [09:39] <T> ribasushi: you could put "giant space monkey penises" instead of "--" and it would work just as well
155 run_or_err "Installing (without testing) $(echo $MODLIST)" \
158 | xargs -d '\\n' -n 1 -P $VCPU_USE bash -c \\
159 'OUT=\$(maint/getstatus $TIMEOUT_CMD cpanm --notest \"\$@\" 2>&1 ) || (LASTEXIT=\$?; echo \"\$OUT\"; exit \$LASTEXIT)' \\
160 'giant space monkey penises'
165 if [[ -z "$@" ]] ; then return; fi
167 MODLIST=$(printf "%q " "$@" | perl -pe 's/^\s+|\s+$//g')
169 local -x HARNESS_OPTIONS
171 HARNESS_OPTIONS="j$VCPU_USE"
173 if ! run_or_err "Attempting install of $# modules under parallel ($HARNESS_OPTIONS) testing ($MODLIST)" "_dep_inst_with_test $MODLIST" quiet_fail ; then
174 local errlog="failed after ${DELTA_TIME}s Exit:$LASTEXIT Log:$(/usr/bin/perl /usr/bin/nopaste -q -s Shadowcat -d "Parallel testfail" <<< "$LASTOUT")"
177 POSTMORTEM="$POSTMORTEM$(
179 echo "Depinstall of $MODLIST under $HARNESS_OPTIONS parallel testing $errlog"
183 run_or_err "Retrying same $# modules without parallel testing" "_dep_inst_with_test $MODLIST"
186 INSTALLDEPS_OUT="${INSTALLDEPS_OUT}${LASTOUT}"
189 _dep_inst_with_test() {
190 if [[ "$DEVREL_DEPS" == "true" ]] ; then
191 # --dev is already part of CPANM_OPT
192 LASTCMD="$TIMEOUT_CMD cpanm $@"
193 $LASTCMD 2>&1 || return 1
195 LASTCMD="$TIMEOUT_CMD cpan $@"
196 $LASTCMD 2>&1 || return 1
198 # older perls do not have a CPAN which can exit with error on failed install
202 $ARGV[0] =~ s/-TRIAL\.//;
206 $ARGV[0] =~ m{ / .*? ( [^/]+ ) $ }x
207 ? do { my @p = split (/\-/, $1); pop @p; join "::", @p }
211 # map some install-names to a module/version combo
212 # serves both as a grandfathered title-less tarball, and
213 # as a minimum version check for upgraded core modules
216 # this is temporary, will need something more robust down the road
217 # (perhaps by then Module::CoreList will be dep-free)
218 "Module::Build" => { ver => "0.4214" },
219 "podlators" => { mod => "Pod::Man", ver => "2.17" },
221 "File::Spec" => { ver => "3.47" },
222 "Cwd" => { ver => "3.47" },
224 "List::Util" => { ver => "1.42" },
225 "Scalar::Util" => { ver => "1.42" },
226 "Scalar::List::Utils" => { mod => "List::Util", ver => "1.42" },
229 my $m = $eval_map->{$mod}{mod} || $mod;
236 ($eval_map->{$mod}{ver}
237 ? "; $m->VERSION(\$eval_map->{\$mod}{ver}) "
246 ( print $@ and exit 1)
248 ' "$m" 2> /dev/null ; then
249 echo -e "$m installation seems to have failed"
257 # https://github.com/kentfredric/Dist-Zilla-Plugin-Prereqs-MatchInstalled-All/blob/master/maint-travis-ci/sterilize_env.pl
258 # Only works on 5.12+ (where sitelib was finally properly fixed)
260 echo_err "$(tstamp) Sterilizing the Perl installation (cleaning up sitelib)"
262 if perl -M5.012 -e1 &>/dev/null ; then
264 perl -M5.012 -MConfig -MFile::Find -e '
266 map { $Config{$_} => 1 }
267 grep { $_ =~ /site(lib|arch)exp$/ }
270 find({ bydepth => 1, no_chdir => 1, follow_fast => 1, wanted => sub {
271 ! $sitedirs->{$_} and ( -d _ ? rmdir : unlink )
272 } }, keys %$sitedirs )
276 cl_fn="/tmp/${TRAVIS_BUILD_ID}_Module_CoreList.pm";
278 [[ -s "$cl_fn" ]] || run_or_err \
279 "Downloading latest Module::CoreList" \
280 "curl -s --compress -o '$cl_fn' https://api.metacpan.org/source/Module::CoreList"
282 perl -0777 -Ilib -MDBIx::Class::Optional::Dependencies -e '
284 # this is horrible, but really all we want is "has this ever been used"
285 # so a grep without a load is quite legit (and horrible)
288 my @all_possible_never_been_core_modpaths = map
289 { (my $mp = $_ . ".pm" ) =~ s|::|/|g; $mp }
291 { $mcl_source !~ / ^ \s+ \x27 $_ \x27 \s* \=\> /mx }
296 keys %{ DBIx::Class::Optional::Dependencies->modreq_list_for([
297 keys %{ DBIx::Class::Optional::Dependencies->req_group_list }
302 # now that we have the list we can go ahead and destroy every single one
303 # of these modules without being concerned about breaking the base ability
305 for my $mp ( sort { lc($a) cmp lc($b) } @all_possible_never_been_core_modpaths ) {
306 for my $incdir (@INC) {
311 print "Nuking $incdir/$mp\n"
320 CPAN_is_sane() { perl -MCPAN\ 1.94_56 -e 1 &>/dev/null ; }
322 CPAN_supports_BUILDPL() { perl -MCPAN\ 1.9205 -e1 &>/dev/null; }
324 have_sudo() { sudo /bin/true &>/dev/null ; }