3 # this file is executed in a subshell - set up the common stuff
4 source maint/travis-ci_scripts/common.bash
6 if [[ -n "$SHORT_CIRCUIT_SMOKE" ]] ; then exit 0 ; fi
8 # The DEVREL_DEPS prereq-install stage won't mix with MVDT
10 if [[ "$DEVREL_DEPS" == "true" ]] ; then
14 # Need a shitton of patches to run on cperl (luckily all provided)
15 # Also need to have YAML in place, otherwise the distroprefs are not readable
16 # (cperl 5.22.2 comes with YAML already)
19 run_or_err "Downloading and installing cperl distroprefs" '
20 wget -qO- https://github.com/rurban/distroprefs/archive/master.tar.gz |\
21 tar -C $HOME/.cpan --strip-components 1 -zx distroprefs-master/prefs distroprefs-master/sources
24 perl -M5.022002 -e1 &>/dev/null || installdeps YAML
28 # FIXME - this is a kludge in place of proper MVDT testing. For the time
29 # being simply use the minimum versions of our DBI/DBDstack, to avoid
30 # fuckups like 0.08260 (went unnoticed for 5 months)
31 if [[ "$MVDT" == "true" ]] ; then
33 # use url-spec for DBI due to https://github.com/miyagawa/cpanminus/issues/328
34 if [[ "$CLEANTEST" != "true" ]] || perl -M5.013003 -e1 &>/dev/null ; then
35 # the fulltest may re-upgrade DBI, be conservative only on cleantests
36 # earlier DBI will not compile without PERL_POLLUTE which was gone in 5.14
37 parallel_installdeps_notest T/TI/TIMB/DBI-1.614.tar.gz
39 # FIXME work around DBD::DB2 being silly: https://rt.cpan.org/Ticket/Display.html?id=101659
40 if [[ -n "$DBICTEST_DB2_DSN" ]] ; then
41 echo_err "Installing same DBI version into the main perl (above the current local::lib)"
42 $SHELL -lic "perlbrew use $( perlbrew use | grep -oP '(?<=Currently using )[^@]+' ) && parallel_installdeps_notest T/TI/TIMB/DBI-1.614.tar.gz"
45 parallel_installdeps_notest T/TI/TIMB/DBI-1.57.tar.gz
47 # FIXME work around DBD::DB2 being silly: https://rt.cpan.org/Ticket/Display.html?id=101659
48 if [[ -n "$DBICTEST_DB2_DSN" ]] ; then
49 echo_err "Installing same DBI version into the main perl (above the current local::lib)"
50 $SHELL -lic "perlbrew use $( perlbrew use | grep -oP '(?<=Currently using )[^@]+' ) && parallel_installdeps_notest T/TI/TIMB/DBI-1.57.tar.gz"
54 # Test both minimum DBD::SQLite and minimum BigInt SQLite
55 # reverse the logic from above for this (low on full, higher on clean)
56 if [[ "$CLEANTEST" = "true" ]]; then
57 parallel_installdeps_notest DBD::SQLite@1.37
59 parallel_installdeps_notest DBD::SQLite@1.29
64 # try minimal fully tested installs *without* a compiler (with some exceptions of course)
65 if [[ "$BREAK_CC" == "true" ]] ; then
67 [[ "$CLEANTEST" != "true" ]] && echo_err "Breaking the compiler without CLEANTEST makes no sense" && exit 1
69 # FIXME - working around RT#74707, https://metacpan.org/source/DOY/Package-Stash-0.37/Makefile.PL#L112-122
71 # DEVREL_DEPS means our installer is cpanm, which will respect failures
72 # and the like, so stuff soft-failing (failed deps that are not in fact
73 # needed) will not fly. Add *EVEN MORE* stuff that needs a compiler
75 # FIXME - the PathTools 3.47 is to work around https://rt.cpan.org/Ticket/Display.html?id=107392
77 installdeps Sub::Name Clone Package::Stash::XS \
78 $( [[ "$DEVREL_DEPS" == "true" ]] && ( perl -MFile::Spec\ 3.13 -e1 &>/dev/null || echo "S/SM/SMUELLER/PathTools-3.47.tar.gz" ) ) \
79 $( perl -MDBI -e1 &>/dev/null || echo "DBI" ) \
80 $( perl -MDBD::SQLite -e1 &>/dev/null || echo "DBD::SQLite" )
82 mkdir -p "$HOME/bin" # this is already in $PATH, just doesn't exist
83 run_or_err "Linking ~/bin/cc to /bin/false - thus essentially BREAKING the C compiler" \
84 "ln -s /bin/false $HOME/bin/cc"
86 # FIXME: working around RT#113682, and some other unfiled bugs
87 installdeps Module::Build Devel::GlobalDestruction Class::Accessor::Grouped
89 run_or_err "Linking ~/bin/cc to /bin/true - BREAKING the C compiler even harder" \
90 "ln -fs /bin/true $HOME/bin/cc"
93 if [[ "$CLEANTEST" = "true" ]]; then
94 # get the last inc/ off cpan - we will get rid of MI
95 # soon enough, but till then this will do
96 # the point is to have a *really* clean perl (the ones
97 # we build are guaranteed to be clean, without side
98 # effects from travis preinstalls)
100 # work around https://github.com/perl11/cperl/issues/145 (no cpanm)
103 wget -qO- $( wget -qO- http://cpanmetadb.plackperl.org/v1.0/package/DBIx::Class | grep distfile | sed "s|distfile:\s*|$CPAN_MIRROR/authors/id/|" ) \
104 | tar -zx --strip-components 1 --wildcards '*/inc'
106 # FIXME - kill this when M::I is gone
107 # Argh -DFORTIFY_INC!!!
108 export PERL5LIB="$PERL5LIB:."
111 # trick cpanm into executing true as shell - we just need the find+unpack
112 [[ -d ~/.cpanm/latest-build/DBIx-Class-*/inc ]] || run_or_err "Downloading latest stable DBIC inc/ from CPAN" \
113 "SHELL=/bin/true cpanm --look DBIx::Class"
115 mv ~/.cpanm/latest-build/DBIx-Class-*/inc .
118 # The first CPAN which is somewhat sane is around 1.94_56 (perl 5.12)
119 # The problem is that the first sane version also brings a *lot* of
120 # deps with it, notably things like YAML and HTTP::Tiny
121 # The goal of CLEANTEST is to have as little extra stuff installed as
122 # possible, mainly to catch "but X is perl core" mistakes
123 # So instead we still use our stock (possibly old) CPAN, and add some
126 if [[ "$DEVREL_DEPS" = "true" ]] ; then
129 elif ! CPAN_is_sane ; then
130 # no configure_requires - we will need the usual suspects anyway
131 # without pre-installing these in one pass things won't yet work
132 installdeps Module::Build
136 # we will be running all dbic tests - preinstall lots of stuff, run basic tests
138 # do the preinstall in several passes to minimize amount of cross-deps installing
139 # multiple times, and to avoid module re-architecture breaking another install
140 # (e.g. once Carp is upgraded there's no more Carp::Heavy)
142 parallel_installdeps_notest Carp
143 parallel_installdeps_notest Module::Build
144 parallel_installdeps_notest Test::Exception Encode::Locale Test::Fatal Module::Runtime
145 parallel_installdeps_notest Test::Warn B::Hooks::EndOfScope Test::Differences HTTP::Status
146 parallel_installdeps_notest Test::Pod::Coverage Test::EOL Devel::GlobalDestruction Sub::Name MRO::Compat Class::XSAccessor URI::Escape HTML::Entities
147 parallel_installdeps_notest YAML LWP Class::Trigger DateTime::Format::Builder Class::Accessor::Grouped Package::Variant
148 parallel_installdeps_notest SQL::Abstract Moose Module::Install@1.15 JSON SQL::Translator File::Which Class::DBI::Plugin git://github.com/dbsrgits/perl-pperl.git
150 # the official version is very much outdated and does not compile on 5.14+
151 # use this rather updated source tree (needs to go to PAUSE):
152 # https://github.com/pilcrow/perl-dbd-interbase
153 if [[ -n "$DBICTEST_FIREBIRD_INTERBASE_DSN" ]] ; then
154 parallel_installdeps_notest git://github.com/dbsrgits/perl-dbd-interbase.git
157 # SCGI does not install under < 5.8.8 perls nor under parallel make
158 # FIXME: The 5.8.8 thing is likely fixable, something to do with
159 # #define speedy_new(s,n,t) Newx(s,n,t)
160 if perl -M5.008008 -e 1 &>/dev/null ; then
161 MAKEFLAGS="" bash -c "parallel_installdeps_notest git://github.com/dbsrgits/cgi-speedycgi.git"
166 # install (remaining) dependencies, sometimes with a gentle push
167 if [[ "$CLEANTEST" = "true" ]]; then
169 run_or_err "Configure on current branch" "perl Makefile.PL"
171 # we are doing a devrel pass - try to upgrade *everything* (we will be using cpanm so safe-ish)
172 if [[ "$DEVREL_DEPS" == "true" ]] ; then
174 HARD_DEPS="$(make listalldeps | sort -R)"
178 HARD_DEPS="$(make listdeps | sort -R)"
180 ##### TEMPORARY WORKAROUNDS needed in case we will be using a fucked CPAN.pm
181 if ! CPAN_is_sane ; then
183 # DBD::SQLite reasonably wants DBI at config time
184 perl -MDBI -e1 &>/dev/null || HARD_DEPS="DBI $HARD_DEPS"
188 ##### END TEMPORARY WORKAROUNDS
191 installdeps $HARD_DEPS
193 run_or_err "Re-configure" "perl Makefile.PL"
197 run_or_err "Configure on current branch with --with-optdeps" "perl Makefile.PL --with-optdeps"
199 # FIXME - evil evil work around for https://github.com/Manwar/Test-Strict/issues/17
200 if perl -M5.025 -e1 &>/dev/null; then
201 mkdir -p "$( perl -MConfig -e 'print $Config{sitelib}' )/Devel"
202 cat <<MyDevelCover > "$( perl -MConfig -e 'print $Config{sitelib}' )/Devel/Cover.pm"
203 package Devel::Cover;
204 our \$VERSION = 0.43;
209 # if we are smoking devrels - make sure we upgrade everything we know about
210 if [[ "$DEVREL_DEPS" == "true" ]] ; then
211 parallel_installdeps_notest "$(make listalldeps | sort -R)"
213 parallel_installdeps_notest "$(make listdeps | sort -R)"
216 run_or_err "Re-configure with --with-optdeps" "perl Makefile.PL --with-optdeps"
219 echo_err "$(tstamp) Dependency installation finished"
221 # make sure we got everything we need
222 if [[ -n "$(make listdeps)" ]] ; then
223 echo_err "$(tstamp) Not all deps installed - something went wrong :("
224 sleep 1 # without this the echo below confuses the console listener >.<
225 CPAN_is_sane || echo_err -e "Outdated CPAN.pm used - full installdep log follows\n$INSTALLDEPS_OUT\n\nSearch for 'NOT OK' in the text above\n\nDeps still missing:"
226 sleep 3 # without this the above echo confuses the console listener >.<
231 # check that our MVDT somewhat works
232 if [[ "$MVDT" == "true" ]] && ( perl -MDBD::SQLite\ 1.38 -e1 || perl -MDBI\ 1.615 -e1 ) &>/dev/null ; then
233 echo_err "Something went wrong - higher versions of DBI and/or DBD::SQLite than we expected"
237 if [[ "$CLEANTEST" = "true" ]] && perl -MModule::Build::Tiny -e1 &>/dev/null ; then
238 echo_err "Module::Build::Tiny pulled in during the basic depchain install - this must not happen"
242 # announce what are we running
244 ===================== DEPENDENCY CONFIGURATION COMPLETE =====================
245 $(tstamp) Configuration phase seems to have taken $(date -ud "@$SECONDS" '+%H:%M:%S') (@$SECONDS)