1 #############################################################################
2 # Pod/Checker.pm -- check pod documents for syntax errors
4 # Copyright (C) 1994-2000 by Bradford Appleton. All rights reserved.
5 # This file is part of "PodParser". PodParser is free software;
6 # you can redistribute it and/or modify it under the same terms
8 #############################################################################
12 use vars qw($VERSION);
13 $VERSION = 1.43; ## Current version of this package
14 require 5.005; ## requires this Perl version or later
16 use Pod::ParseUtils; ## for hyperlinks and lists
20 Pod::Checker, podchecker() - check pod documents for syntax errors
26 $syntax_okay = podchecker($filepath, $outputpath, %options);
28 my $checker = new Pod::Checker %options;
29 $checker->parse_from_file($filepath, \*STDERR);
31 =head1 OPTIONS/ARGUMENTS
33 C<$filepath> is the input POD to read and C<$outputpath> is
34 where to write POD syntax error messages. Either argument may be a scalar
35 indicating a file-path, or else a reference to an open filehandle.
36 If unspecified, the input-file it defaults to C<\*STDIN>, and
37 the output-file defaults to C<\*STDERR>.
41 This function can take a hash of options:
45 =item B<-warnings> =E<gt> I<val>
47 Turn warnings on/off. I<val> is usually 1 for on, but higher values
48 trigger additional warnings. See L<"Warnings">.
54 B<podchecker> will perform syntax checking of Perl5 POD format documentation.
56 Curious/ambitious users are welcome to propose additional features they wish
57 to see in B<Pod::Checker> and B<podchecker> and verify that the checks are
58 consistent with L<perlpod>.
60 The following checks are currently performed:
66 Unknown '=xxxx' commands, unknown 'XE<lt>...E<gt>' interior-sequences,
67 and unterminated interior sequences.
71 Check for proper balancing of C<=begin> and C<=end>. The contents of such
72 a block are generally ignored, i.e. no syntax checks are performed.
76 Check for proper nesting and balancing of C<=over>, C<=item> and C<=back>.
80 Check for same nested interior-sequences (e.g.
81 C<LE<lt>...LE<lt>...E<gt>...E<gt>>).
85 Check for malformed or non-existing entities C<EE<lt>...E<gt>>.
89 Check for correct syntax of hyperlinks C<LE<lt>...E<gt>>. See L<perlpod>
94 Check for unresolved document-internal links. This check may also reveal
95 misspelled links that seem to be internal links but should be links
108 A heading (C<=head1> or C<=head2>) without any text? That ain't no
111 =item * =over on line I<N> without closing =back
113 The C<=over> command does not have a corresponding C<=back> before the
114 next heading (C<=head1> or C<=head2>) or the end of the file.
116 =item * =item without previous =over
118 =item * =back without previous =over
120 An C<=item> or C<=back> command has been found outside a
121 C<=over>/C<=back> block.
123 =item * No argument for =begin
125 A C<=begin> command was found that is not followed by the formatter
128 =item * =end without =begin
130 A standalone C<=end> command was found.
132 =item * Nested =begin's
134 There were at least two consecutive C<=begin> commands without
135 the corresponding C<=end>. Only one C<=begin> may be active at
138 =item * =for without formatter specification
140 There is no specification of the formatter after the C<=for> command.
142 =item * unresolved internal link I<NAME>
144 The given link to I<NAME> does not have a matching node in the current
145 POD. This also happened when a single word node name is not enclosed in
148 =item * Unknown command "I<CMD>"
150 An invalid POD command has been found. Valid are C<=head1>, C<=head2>,
151 C<=head3>, C<=head4>, C<=over>, C<=item>, C<=back>, C<=begin>, C<=end>,
152 C<=for>, C<=pod>, C<=cut>
154 =item * Unknown interior-sequence "I<SEQ>"
156 An invalid markup command has been encountered. Valid are:
157 C<BE<lt>E<gt>>, C<CE<lt>E<gt>>, C<EE<lt>E<gt>>, C<FE<lt>E<gt>>,
158 C<IE<lt>E<gt>>, C<LE<lt>E<gt>>, C<SE<lt>E<gt>>, C<XE<lt>E<gt>>,
161 =item * nested commands I<CMD>E<lt>...I<CMD>E<lt>...E<gt>...E<gt>
163 Two nested identical markup commands have been found. Generally this
166 =item * garbled entity I<STRING>
168 The I<STRING> found cannot be interpreted as a character entity.
170 =item * Entity number out of range
172 An entity specified by number (dec, hex, oct) is out of range (1-255).
174 =item * malformed link LE<lt>E<gt>
176 The link found cannot be parsed because it does not conform to the
177 syntax described in L<perlpod>.
179 =item * nonempty ZE<lt>E<gt>
181 The C<ZE<lt>E<gt>> sequence is supposed to be empty.
183 =item * empty XE<lt>E<gt>
185 The index entry specified contains nothing but whitespace.
187 =item * Spurious text after =pod / =cut
189 The commands C<=pod> and C<=cut> do not take any arguments.
191 =item * Spurious character(s) after =back
193 The C<=back> command does not take any arguments.
199 These may not necessarily cause trouble, but indicate mediocre style.
203 =item * multiple occurrence of link target I<name>
205 The POD file has some C<=item> and/or C<=head> commands that have
206 the same text. Potential hyperlinks to such a text cannot be unique then.
207 This warning is printed only with warning level greater than one.
209 =item * line containing nothing but whitespace in paragraph
211 There is some whitespace on a seemingly empty line. POD is very sensitive
212 to such things, so this is flagged. B<vi> users switch on the B<list>
213 option to avoid this problem.
217 =item * file does not start with =head
219 The file starts with a different POD directive than head.
220 This is most probably something you do not want.
224 =item * previous =item has no contents
226 There is a list C<=item> right above the flagged line that has no
227 text contents. You probably want to delete empty items.
229 =item * preceding non-item paragraph(s)
231 A list introduced by C<=over> starts with a text or verbatim paragraph,
232 but continues with C<=item>s. Move the non-item paragraph out of the
233 C<=over>/C<=back> block.
235 =item * =item type mismatch (I<one> vs. I<two>)
237 A list started with e.g. a bullet-like C<=item> and continued with a
238 numbered one. This is obviously inconsistent. For most translators the
239 type of the I<first> C<=item> determines the type of the list.
241 =item * I<N> unescaped C<E<lt>E<gt>> in paragraph
243 Angle brackets not written as C<E<lt>ltE<gt>> and C<E<lt>gtE<gt>>
244 can potentially cause errors as they could be misinterpreted as
245 markup commands. This is only printed when the -warnings level is
248 =item * Unknown entity
250 A character entity was found that does not belong to the standard
251 ISO set or the POD specials C<verbar> and C<sol>.
253 =item * No items in =over
255 The list opened with C<=over> does not contain any items.
257 =item * No argument for =item
259 C<=item> without any parameters is deprecated. It should either be followed
260 by C<*> to indicate an unordered list, by a number (optionally followed
261 by a dot) to indicate an ordered (numbered) list or simple text for a
264 =item * empty section in previous paragraph
266 The previous section (introduced by a C<=head> command) does not contain
267 any text. This usually indicates that something is missing. Note: A
268 C<=head1> followed immediately by C<=head2> does not trigger this warning.
270 =item * Verbatim paragraph in NAME section
272 The NAME section (C<=head1 NAME>) should consist of a single paragraph
273 with the script/module name, followed by a dash `-' and a very short
274 description of what the thing is good for.
276 =item * =headI<n> without preceding higher level
278 For example if there is a C<=head2> in the POD file prior to a
285 There are some warnings with respect to malformed hyperlinks:
289 =item * ignoring leading/trailing whitespace in link
291 There is whitespace at the beginning or the end of the contents of
294 =item * (section) in '$page' deprecated
296 There is a section detected in the page name of LE<lt>...E<gt>, e.g.
297 C<LE<lt>passwd(2)E<gt>>. POD hyperlinks may point to POD documents only.
298 Please write C<CE<lt>passwd(2)E<gt>> instead. Some formatters are able
299 to expand this to appropriate code. For links to (builtin) functions,
300 please say C<LE<lt>perlfunc/mkdirE<gt>>, without ().
302 =item * alternative text/node '%s' contains non-escaped | or /
304 The characters C<|> and C</> are special in the LE<lt>...E<gt> context.
305 Although the hyperlink parser does its best to determine which "/" is
306 text and which is a delimiter in case of doubt, one ought to escape
307 these literal characters like this:
316 B<podchecker> returns the number of POD syntax errors found or -1 if
317 there were no POD commands at all found in the file.
325 While checking, this module collects document properties, e.g. the nodes
326 for hyperlinks (C<=headX>, C<=item>) and index entries (C<XE<lt>E<gt>>).
327 POD translators can use this feature to syntax-check and get the nodes in
328 a first pass before actually starting to convert. This is expensive in terms
329 of execution time, but allows for very robust conversions.
331 Since PodParser-1.24 the B<Pod::Checker> module uses only the B<poderror>
332 method to print errors and warnings. The summary output (e.g.
333 "Pod syntax OK") has been dropped from the module and has been included in
334 B<podchecker> (the script). This allows users of B<Pod::Checker> to
335 control completely the output behavior. Users of B<podchecker> (the script)
336 get the well-known behavior.
340 #############################################################################
348 use vars qw(@ISA @EXPORT);
349 @ISA = qw(Pod::Parser);
350 @EXPORT = qw(&podchecker);
352 use vars qw(%VALID_COMMANDS %VALID_SEQUENCES);
354 my %VALID_COMMANDS = (
369 my %VALID_SEQUENCES = (
381 # stolen from HTML::Entities
383 # Some normal chars that have special meaning in SGML context
384 amp => '&', # ampersand
385 'gt' => '>', # greater than
386 'lt' => '<', # less than
387 quot => '"', # double quote
389 # PUBLIC ISO 8879-1986//ENTITIES Added Latin 1//EN//HTML
390 AElig => 'Æ', # capital AE diphthong (ligature)
391 Aacute => 'Á', # capital A, acute accent
392 Acirc => 'Â', # capital A, circumflex accent
393 Agrave => 'À', # capital A, grave accent
394 Aring => 'Å', # capital A, ring
395 Atilde => 'Ã', # capital A, tilde
396 Auml => 'Ä', # capital A, dieresis or umlaut mark
397 Ccedil => 'Ç', # capital C, cedilla
398 ETH => 'Ð', # capital Eth, Icelandic
399 Eacute => 'É', # capital E, acute accent
400 Ecirc => 'Ê', # capital E, circumflex accent
401 Egrave => 'È', # capital E, grave accent
402 Euml => 'Ë', # capital E, dieresis or umlaut mark
403 Iacute => 'Í', # capital I, acute accent
404 Icirc => 'Î', # capital I, circumflex accent
405 Igrave => 'Ì', # capital I, grave accent
406 Iuml => 'Ï', # capital I, dieresis or umlaut mark
407 Ntilde => 'Ñ', # capital N, tilde
408 Oacute => 'Ó', # capital O, acute accent
409 Ocirc => 'Ô', # capital O, circumflex accent
410 Ograve => 'Ò', # capital O, grave accent
411 Oslash => 'Ø', # capital O, slash
412 Otilde => 'Õ', # capital O, tilde
413 Ouml => 'Ö', # capital O, dieresis or umlaut mark
414 THORN => 'Þ', # capital THORN, Icelandic
415 Uacute => 'Ú', # capital U, acute accent
416 Ucirc => 'Û', # capital U, circumflex accent
417 Ugrave => 'Ù', # capital U, grave accent
418 Uuml => 'Ü', # capital U, dieresis or umlaut mark
419 Yacute => 'Ý', # capital Y, acute accent
420 aacute => 'á', # small a, acute accent
421 acirc => 'â', # small a, circumflex accent
422 aelig => 'æ', # small ae diphthong (ligature)
423 agrave => 'à', # small a, grave accent
424 aring => 'å', # small a, ring
425 atilde => 'ã', # small a, tilde
426 auml => 'ä', # small a, dieresis or umlaut mark
427 ccedil => 'ç', # small c, cedilla
428 eacute => 'é', # small e, acute accent
429 ecirc => 'ê', # small e, circumflex accent
430 egrave => 'è', # small e, grave accent
431 eth => 'ð', # small eth, Icelandic
432 euml => 'ë', # small e, dieresis or umlaut mark
433 iacute => 'í', # small i, acute accent
434 icirc => 'î', # small i, circumflex accent
435 igrave => 'ì', # small i, grave accent
436 iuml => 'ï', # small i, dieresis or umlaut mark
437 ntilde => 'ñ', # small n, tilde
438 oacute => 'ó', # small o, acute accent
439 ocirc => 'ô', # small o, circumflex accent
440 ograve => 'ò', # small o, grave accent
441 oslash => 'ø', # small o, slash
442 otilde => 'õ', # small o, tilde
443 ouml => 'ö', # small o, dieresis or umlaut mark
444 szlig => 'ß', # small sharp s, German (sz ligature)
445 thorn => 'þ', # small thorn, Icelandic
446 uacute => 'ú', # small u, acute accent
447 ucirc => 'û', # small u, circumflex accent
448 ugrave => 'ù', # small u, grave accent
449 uuml => 'ü', # small u, dieresis or umlaut mark
450 yacute => 'ý', # small y, acute accent
451 yuml => 'ÿ', # small y, dieresis or umlaut mark
453 # Some extra Latin 1 chars that are listed in the HTML3.2 draft (21-May-96)
454 copy => '©', # copyright sign
455 reg => '®', # registered sign
456 nbsp => "\240", # non breaking space
458 # Additional ISO-8859/1 entities listed in rfc1866 (section 14)
469 'not' => '¬', # not is a keyword in perl
488 'times' => '×', # times is a keyword in perl
491 # some POD special entities
496 ##---------------------------------------------------------------------------
498 ##---------------------------------
499 ## Function definitions begin here
500 ##---------------------------------
502 sub podchecker( $ ; $ % ) {
503 my ($infile, $outfile, %options) = @_;
508 $outfile ||= \*STDERR;
510 ## Now create a pod checker
511 my $checker = new Pod::Checker(%options);
513 ## Now check the pod document for errors
514 $checker->parse_from_file($infile, $outfile);
516 ## Return the number of errors found
517 return $checker->num_errors();
520 ##---------------------------------------------------------------------------
522 ##-------------------------------
523 ## Method definitions begin here
524 ##-------------------------------
526 ##################################
530 =item C<Pod::Checker-E<gt>new( %options )>
532 Return a reference to a new Pod::Checker object that inherits from
533 Pod::Parser and is used for calling the required methods later. The
534 following options are recognized:
536 C<-warnings =E<gt> num>
537 Print warnings if C<num> is true. The higher the value of C<num>,
538 the more warnings are printed. Currently there are only levels 1 and 2.
541 If C<num> is true, do not print any errors/warnings. This is useful
542 when Pod::Checker is used to munge POD code into plain text from within
549 ## my $class = ref($this) || $this;
551 ## my $self = {%params};
552 ## bless $self, $class;
553 ## $self->initialize();
559 ## Initialize number of errors, and setup an error function to
560 ## increment this number and then print to the designated output.
561 $self->{_NUM_ERRORS} = 0;
562 $self->{_NUM_WARNINGS} = 0;
563 $self->{-quiet} ||= 0;
564 # set the error handling subroutine
565 $self->errorsub($self->{-quiet} ? sub { 1; } : 'poderror');
566 $self->{_commands} = 0; # total number of POD commands encountered
567 $self->{_list_stack} = []; # stack for nested lists
568 $self->{_have_begin} = ''; # stores =begin
569 $self->{_links} = []; # stack for internal hyperlinks
570 $self->{_nodes} = []; # stack for =head/=item nodes
571 $self->{_index} = []; # text in X<>
573 $self->{-warnings} = 1 unless(defined $self->{-warnings});
574 $self->{_current_head1} = ''; # the current =head1 block
575 $self->parseopts(-process_cut_cmd => 1, -warnings => $self->{-warnings});
578 ##################################
580 =item C<$checker-E<gt>poderror( @args )>
582 =item C<$checker-E<gt>poderror( {%opts}, @args )>
584 Internal method for printing errors and warnings. If no options are
585 given, simply prints "@_". The following options are recognized and used
590 A message to print prior to C<@args>.
594 The line number the error occurred in.
598 The file (name) the error occurred in.
602 The error level, should be 'WARNING' or 'ERROR'.
606 # Invoked as $self->poderror( @args ), or $self->poderror( {%opts}, @args )
609 my %opts = (ref $_[0]) ? %{shift()} : ();
612 chomp( my $msg = ($opts{-msg} || "")."@_" );
613 my $line = (exists $opts{-line}) ? " at line $opts{-line}" : "";
614 my $file = (exists $opts{-file}) ? " in file $opts{-file}" : "";
615 unless (exists $opts{-severity}) {
616 ## See if can find severity in message prefix
617 $opts{-severity} = $1 if ( $msg =~ s/^\**\s*([A-Z]{3,}):\s+// );
619 my $severity = (exists $opts{-severity}) ? "*** $opts{-severity}: " : "";
621 ## Increment error count and print message "
622 ++($self->{_NUM_ERRORS})
623 if(!%opts || ($opts{-severity} && $opts{-severity} eq 'ERROR'));
624 ++($self->{_NUM_WARNINGS})
625 if(!%opts || ($opts{-severity} && $opts{-severity} eq 'WARNING'));
626 unless($self->{-quiet}) {
627 my $out_fh = $self->output_handle() || \*STDERR;
628 print $out_fh ($severity, $msg, $line, $file, "\n")
629 if($self->{-warnings} || !%opts || $opts{-severity} ne 'WARNING');
633 ##################################
635 =item C<$checker-E<gt>num_errors()>
637 Set (if argument specified) and retrieve the number of errors found.
642 return (@_ > 1) ? ($_[0]->{_NUM_ERRORS} = $_[1]) : $_[0]->{_NUM_ERRORS};
645 ##################################
647 =item C<$checker-E<gt>num_warnings()>
649 Set (if argument specified) and retrieve the number of warnings found.
654 return (@_ > 1) ? ($_[0]->{_NUM_WARNINGS} = $_[1]) : $_[0]->{_NUM_WARNINGS};
657 ##################################
659 =item C<$checker-E<gt>name()>
661 Set (if argument specified) and retrieve the canonical name of POD as
662 found in the C<=head1 NAME> section.
667 return (@_ > 1 && $_[1]) ?
668 ($_[0]->{-name} = $_[1]) : $_[0]->{-name};
671 ##################################
673 =item C<$checker-E<gt>node()>
675 Add (if argument specified) and retrieve the nodes (as defined by C<=headX>
676 and C<=item>) of the current POD. The nodes are returned in the order of
677 their occurrence. They consist of plain text, each piece of whitespace is
678 collapsed to a single blank.
683 my ($self,$text) = @_;
685 $text =~ s/\s+$//s; # strip trailing whitespace
686 $text =~ s/\s+/ /gs; # collapse whitespace
687 # add node, order important!
688 push(@{$self->{_nodes}}, $text);
689 # keep also a uniqueness counter
690 $self->{_unique_nodes}->{$text}++ if($text !~ /^\s*$/s);
696 ##################################
698 =item C<$checker-E<gt>idx()>
700 Add (if argument specified) and retrieve the index entries (as defined by
701 C<XE<lt>E<gt>>) of the current POD. They consist of plain text, each piece
702 of whitespace is collapsed to a single blank.
706 # set/return index entries of current POD
708 my ($self,$text) = @_;
710 $text =~ s/\s+$//s; # strip trailing whitespace
711 $text =~ s/\s+/ /gs; # collapse whitespace
712 # add node, order important!
713 push(@{$self->{_index}}, $text);
714 # keep also a uniqueness counter
715 $self->{_unique_nodes}->{$text}++ if($text !~ /^\s*$/s);
721 ##################################
723 =item C<$checker-E<gt>hyperlink()>
725 Add (if argument specified) and retrieve the hyperlinks (as defined by
726 C<LE<lt>E<gt>>) of the current POD. They consist of a 2-item array: line
727 number and C<Pod::Hyperlink> object.
733 # set/return hyperlinks of the current POD
737 push(@{$self->{_links}}, $_[0]);
743 ## overrides for Pod::Parser
746 ## Do some final checks and
747 ## print the number of errors found
749 my $infile = $self->input_file();
751 if(@{$self->{_list_stack}}) {
753 while(($list = $self->_close_list('EOF',$infile)) &&
754 $list->indent() ne 'auto') {
755 $self->poderror({ -line => 'EOF', -file => $infile,
756 -severity => 'ERROR', -msg => "=over on line " .
757 $list->start() . " without closing =back" }); #"
761 # check validity of document internal hyperlinks
762 # first build the node names from the paragraph text
764 foreach($self->node()) {
767 # we have more than one word. Use the first as a node, too.
768 # This is used heavily in perlfunc.pod
769 $nodes{$1} ||= 2; # derived node
772 foreach($self->idx()) {
773 $nodes{$_} = 3; # index node
775 foreach($self->hyperlink()) {
776 my ($line,$link) = @$_;
777 # _TODO_ what if there is a link to the page itself by the name,
778 # e.g. in Tk::Pod : L<Tk::Pod/"DESCRIPTION">
779 if($link->node() && !$link->page() && $link->type() ne 'hyperlink') {
780 my $node = $self->_check_ptree($self->parse_text($link->node(),
781 $line), $line, $infile, 'L');
782 if($node && !$nodes{$node}) {
783 $self->poderror({ -line => $line || '', -file => $infile,
784 -severity => 'ERROR',
785 -msg => "unresolved internal link '$node'"});
790 # check the internal nodes for uniqueness. This pertains to
791 # =headX, =item and X<...>
792 if($self->{-warnings} && $self->{-warnings}>1) {
793 foreach(grep($self->{_unique_nodes}->{$_} > 1,
794 keys %{$self->{_unique_nodes}})) {
795 $self->poderror({ -line => '-', -file => $infile,
796 -severity => 'WARNING',
797 -msg => "multiple occurrence of link target '$_'"});
802 $self->num_errors(-1) if($self->{_commands} == 0);
805 # check a POD command directive
807 my ($self, $cmd, $paragraph, $line_num, $pod_para) = @_;
808 my ($file, $line) = $pod_para->file_line;
809 ## Check the command syntax
810 my $arg; # this will hold the command argument
811 if (! $VALID_COMMANDS{$cmd}) {
812 $self->poderror({ -line => $line, -file => $file, -severity => 'ERROR',
813 -msg => "Unknown command '$cmd'" });
815 else { # found a valid command
816 $self->{_commands}++; # delete this line if below is enabled again
818 ##### following check disabled due to strong request
819 #if(!$self->{_commands}++ && $cmd !~ /^head/) {
820 # $self->poderror({ -line => $line, -file => $file,
821 # -severity => 'WARNING',
822 # -msg => "file does not start with =head" });
825 # check syntax of particular command
828 $arg = $self->interpolate_and_check($paragraph, $line,$file);
829 my $indent = 4; # default
830 if($arg && $arg =~ /^\s*(\d+)\s*$/) {
834 $self->_open_list($indent,$line,$file);
836 elsif($cmd eq 'item') {
838 unless(@{$self->{_list_stack}}) {
839 $self->poderror({ -line => $line, -file => $file,
840 -severity => 'ERROR',
841 -msg => "=item without previous =over" });
842 # auto-open in case we encounter many more
843 $self->_open_list('auto',$line,$file);
845 my $list = $self->{_list_stack}->[0];
846 # check whether the previous item had some contents
847 if(defined $self->{_list_item_contents} &&
848 $self->{_list_item_contents} == 0) {
849 $self->poderror({ -line => $line, -file => $file,
850 -severity => 'WARNING',
851 -msg => "previous =item has no contents" });
853 if($list->{_has_par}) {
854 $self->poderror({ -line => $line, -file => $file,
855 -severity => 'WARNING',
856 -msg => "preceding non-item paragraph(s)" });
857 delete $list->{_has_par};
860 $arg = $self->interpolate_and_check($paragraph, $line, $file);
861 if($arg && $arg =~ /(\S+)/) {
862 $arg =~ s/[\s\n]+$//;
864 if($arg =~ /^[*]\s*(\S*.*)/) {
866 $self->{_list_item_contents} = $1 ? 1 : 0;
869 elsif($arg =~ /^\d+\.?\s*(\S*)/) {
871 $self->{_list_item_contents} = $1 ? 1 : 0;
875 $type = 'definition';
876 $self->{_list_item_contents} = 1;
878 my $first = $list->type();
879 if($first && $first ne $type) {
880 $self->poderror({ -line => $line, -file => $file,
881 -severity => 'WARNING',
882 -msg => "=item type mismatch ('$first' vs. '$type')"});
889 $self->poderror({ -line => $line, -file => $file,
890 -severity => 'WARNING',
891 -msg => "No argument for =item" });
893 $self->{_list_item_contents} = 0;
900 elsif($cmd eq 'back') {
901 # check if we have an open list
902 unless(@{$self->{_list_stack}}) {
903 $self->poderror({ -line => $line, -file => $file,
904 -severity => 'ERROR',
905 -msg => "=back without previous =over" });
908 # check for spurious characters
909 $arg = $self->interpolate_and_check($paragraph, $line,$file);
910 if($arg && $arg =~ /\S/) {
911 $self->poderror({ -line => $line, -file => $file,
912 -severity => 'ERROR',
913 -msg => "Spurious character(s) after =back" });
916 my $list = $self->_close_list($line,$file);
917 # check for empty lists
918 if(!$list->item() && $self->{-warnings}) {
919 $self->poderror({ -line => $line, -file => $file,
920 -severity => 'WARNING',
921 -msg => "No items in =over (at line " .
922 $list->start() . ") / =back list"}); #"
926 elsif($cmd =~ /^head(\d+)/) {
928 $self->{"_have_head_$hnum"}++; # count head types
929 if($hnum > 1 && !$self->{"_have_head_".($hnum -1)}) {
930 $self->poderror({ -line => $line, -file => $file,
931 -severity => 'WARNING',
932 -msg => "=head$hnum without preceding higher level"});
934 # check whether the previous =head section had some contents
935 if(defined $self->{_commands_in_head} &&
936 $self->{_commands_in_head} == 0 &&
937 defined $self->{_last_head} &&
938 $self->{_last_head} >= $hnum) {
939 $self->poderror({ -line => $line, -file => $file,
940 -severity => 'WARNING',
941 -msg => "empty section in previous paragraph"});
943 $self->{_commands_in_head} = -1;
944 $self->{_last_head} = $hnum;
945 # check if there is an open list
946 if(@{$self->{_list_stack}}) {
948 while(($list = $self->_close_list($line,$file)) &&
949 $list->indent() ne 'auto') {
950 $self->poderror({ -line => $line, -file => $file,
951 -severity => 'ERROR',
952 -msg => "=over on line ". $list->start() .
953 " without closing =back (at $cmd)" });
957 $arg = $self->interpolate_and_check($paragraph, $line,$file);
958 $arg =~ s/[\s\n]+$//s;
960 unless(length($arg)) {
961 $self->poderror({ -line => $line, -file => $file,
962 -severity => 'ERROR',
963 -msg => "empty =$cmd"});
965 if($cmd eq 'head1') {
966 $self->{_current_head1} = $arg;
968 $self->{_current_head1} = '';
971 elsif($cmd eq 'begin') {
972 if($self->{_have_begin}) {
973 # already have a begin
974 $self->poderror({ -line => $line, -file => $file,
975 -severity => 'ERROR',
976 -msg => "Nested =begin's (first at line " .
977 $self->{_have_begin} . ")"});
981 $arg = $self->interpolate_and_check($paragraph, $line,$file);
982 unless($arg && $arg =~ /(\S+)/) {
983 $self->poderror({ -line => $line, -file => $file,
984 -severity => 'ERROR',
985 -msg => "No argument for =begin"});
987 # remember the =begin
988 $self->{_have_begin} = "$line:$1";
991 elsif($cmd eq 'end') {
992 if($self->{_have_begin}) {
993 # close the existing =begin
994 $self->{_have_begin} = '';
995 # check for spurious characters
996 $arg = $self->interpolate_and_check($paragraph, $line,$file);
997 # the closing argument is optional
998 #if($arg && $arg =~ /\S/) {
999 # $self->poderror({ -line => $line, -file => $file,
1000 # -severity => 'WARNING',
1001 # -msg => "Spurious character(s) after =end" });
1005 # don't have a matching =begin
1006 $self->poderror({ -line => $line, -file => $file,
1007 -severity => 'ERROR',
1008 -msg => "=end without =begin" });
1011 elsif($cmd eq 'for') {
1012 unless($paragraph =~ /\s*(\S+)\s*/) {
1013 $self->poderror({ -line => $line, -file => $file,
1014 -severity => 'ERROR',
1015 -msg => "=for without formatter specification" });
1017 $arg = ''; # do not expand paragraph below
1019 elsif($cmd =~ /^(pod|cut)$/) {
1020 # check for argument
1021 $arg = $self->interpolate_and_check($paragraph, $line,$file);
1022 if($arg && $arg =~ /(\S+)/) {
1023 $self->poderror({ -line => $line, -file => $file,
1024 -severity => 'ERROR',
1025 -msg => "Spurious text after =$cmd"});
1028 $self->{_commands_in_head}++;
1029 ## Check the interior sequences in the command-text
1030 $self->interpolate_and_check($paragraph, $line,$file)
1031 unless(defined $arg);
1037 my ($self,$indent,$line,$file) = @_;
1038 my $list = Pod::List->new(
1042 unshift(@{$self->{_list_stack}}, $list);
1043 undef $self->{_list_item_contents};
1049 my ($self,$line,$file) = @_;
1050 my $list = shift(@{$self->{_list_stack}});
1051 if(defined $self->{_list_item_contents} &&
1052 $self->{_list_item_contents} == 0) {
1053 $self->poderror({ -line => $line, -file => $file,
1054 -severity => 'WARNING',
1055 -msg => "previous =item has no contents" });
1057 undef $self->{_list_item_contents};
1061 # process a block of some text
1062 sub interpolate_and_check {
1063 my ($self, $paragraph, $line, $file) = @_;
1064 ## Check the interior sequences in the command-text
1065 # and return the text
1066 $self->_check_ptree(
1067 $self->parse_text($paragraph,$line), $line, $file, '');
1071 my ($self,$ptree,$line,$file,$nestlist) = @_;
1074 # process each node in the parse tree
1076 # regular text chunk
1078 # count the unescaped angle brackets
1079 # complain only when warning level is greater than 1
1080 if($self->{-warnings} && $self->{-warnings}>1) {
1082 if($count = tr/<>/<>/) {
1083 $self->poderror({ -line => $line, -file => $file,
1084 -severity => 'WARNING',
1085 -msg => "$count unescaped <> in paragraph" });
1091 # have an interior sequence
1092 my $cmd = $_->cmd_name();
1093 my $contents = $_->parse_tree();
1094 ($file,$line) = $_->file_line();
1095 # check for valid tag
1096 if (! $VALID_SEQUENCES{$cmd}) {
1097 $self->poderror({ -line => $line, -file => $file,
1098 -severity => 'ERROR',
1099 -msg => qq(Unknown interior-sequence '$cmd')});
1101 $text .= $self->_check_ptree($contents, $line, $file, "$nestlist$cmd");
1104 if($nestlist =~ /$cmd/) {
1105 $self->poderror({ -line => $line, -file => $file,
1106 -severity => 'WARNING',
1107 -msg => "nested commands $cmd<...$cmd<...>...>"});
1108 # _TODO_ should we add the contents anyway?
1109 # expand it anyway, see below
1113 if(@$contents > 1 || ref $$contents[0] || $$contents[0] !~ /^\w+$/) {
1114 $self->poderror({ -line => $line, -file => $file,
1115 -severity => 'ERROR',
1116 -msg => "garbled entity " . $_->raw_text()});
1119 my $ent = $$contents[0];
1121 if($ent =~ /^0x[0-9a-f]+$/i) {
1125 elsif($ent =~ /^0\d+$/) {
1129 elsif($ent =~ /^\d+$/) {
1134 if($val>0 && $val<256) {
1138 $self->poderror({ -line => $line, -file => $file,
1139 -severity => 'ERROR',
1140 -msg => "Entity number out of range " . $_->raw_text()});
1143 elsif($ENTITIES{$ent}) {
1145 $text .= $ENTITIES{$ent};
1148 $self->poderror({ -line => $line, -file => $file,
1149 -severity => 'WARNING',
1150 -msg => "Unknown entity " . $_->raw_text()});
1154 elsif($cmd eq 'L') {
1155 # try to parse the hyperlink
1156 my $link = Pod::Hyperlink->new($contents->raw_text());
1157 unless(defined $link) {
1158 $self->poderror({ -line => $line, -file => $file,
1159 -severity => 'ERROR',
1160 -msg => "malformed link " . $_->raw_text() ." : $@"});
1163 $link->line($line); # remember line
1164 if($self->{-warnings}) {
1165 foreach my $w ($link->warning()) {
1166 $self->poderror({ -line => $line, -file => $file,
1167 -severity => 'WARNING',
1171 # check the link text
1172 $text .= $self->_check_ptree($self->parse_text($link->text(),
1173 $line), $line, $file, "$nestlist$cmd");
1175 $self->hyperlink([$line,$link]);
1177 elsif($cmd =~ /[BCFIS]/) {
1179 $text .= $self->_check_ptree($contents, $line, $file, "$nestlist$cmd");
1181 elsif($cmd eq 'Z') {
1182 if(length($contents->raw_text())) {
1183 $self->poderror({ -line => $line, -file => $file,
1184 -severity => 'ERROR',
1185 -msg => "Nonempty Z<>"});
1188 elsif($cmd eq 'X') {
1189 my $idx = $self->_check_ptree($contents, $line, $file, "$nestlist$cmd");
1190 if($idx =~ /^\s*$/s) {
1191 $self->poderror({ -line => $line, -file => $file,
1192 -severity => 'ERROR',
1193 -msg => "Empty X<>"});
1196 # remember this node
1202 die "internal error";
1208 # process a block of verbatim text
1210 ## Nothing particular to check
1211 my ($self, $paragraph, $line_num, $pod_para) = @_;
1213 $self->_preproc_par($paragraph);
1215 if($self->{_current_head1} eq 'NAME') {
1216 my ($file, $line) = $pod_para->file_line;
1217 $self->poderror({ -line => $line, -file => $file,
1218 -severity => 'WARNING',
1219 -msg => 'Verbatim paragraph in NAME section' });
1223 # process a block of regular text
1225 my ($self, $paragraph, $line_num, $pod_para) = @_;
1226 my ($file, $line) = $pod_para->file_line;
1228 $self->_preproc_par($paragraph);
1230 # skip this paragraph if in a =begin block
1231 unless($self->{_have_begin}) {
1232 my $block = $self->interpolate_and_check($paragraph, $line,$file);
1233 if($self->{_current_head1} eq 'NAME') {
1234 if($block =~ /^\s*(\S+?)\s*[,-]/) {
1235 # this is the canonical name
1236 $self->{-name} = $1 unless(defined $self->{-name});
1245 $_[0] =~ s/[\s\n]+$//;
1247 $self->{_commands_in_head}++;
1248 $self->{_list_item_contents}++ if(defined $self->{_list_item_contents});
1249 if(@{$self->{_list_stack}} && !$self->{_list_stack}->[0]->item()) {
1250 $self->{_list_stack}->[0]->{_has_par} = 1;
1261 Please report bugs using L<http://rt.cpan.org>.
1263 Brad Appleton E<lt>bradapp@enteract.comE<gt> (initial version),
1264 Marek Rouchal E<lt>marekr@cpan.orgE<gt>
1266 Based on code for B<Pod::Text::pod2text()> written by
1267 Tom Christiansen E<lt>tchrist@mox.perl.comE<gt>