6 * Fixed problem that meant Perl 5.10 could not upgrade this module.
11 * Minor documentation issue with flush.
16 * Minor documentation changes in README
18 2.007 22 September 20007
20 * lib/Compress/Zlib.pm -- 1.x Backward Compatability issues
21 gzclose - documented return value was wrong, should be 0 for ok.
22 gzflush - return value didn't match 1.x, should return 0 if ok.
23 [rt.cpan.org #29215] and Debian bug #440943 http://bugs.debian.org/440943
25 2.006 1 September 20007
28 Added INSTALLDIRS directive to install as a core module when built
32 Fixed crc32 and adler32 tests in to remove ascii assumption.
34 * lib/Compress/Zlib.pm
35 Make gzreadline not support $/, just like in Compress::Zlib 1.x
36 Folk who want $/ with readline support can get it in
37 IO::Uncompress::Gunzip.
38 [rt.cpan.org #28663] and Debian bug #435656 http://bugs.debian.org/435656
41 * Added info about removing Compress::Zlib version 1, before
46 * rewrote memGzip using IO::Compress::Gzip::gzip
50 * Added explicit version checking
52 2.002 29 December 2006
54 * Documentation updates.
56 * Fix append mode with gzopen.
59 * Allow gzopen to read from and write to a scalar reference.
65 2.000_14 26 October 2006
73 2.000_12 16 April 2006
75 * Fixed gzread to zap the output buffer to an empty string when zero
76 bytes are requested. This matches the behaviour of C::Z 1.x
78 2.000_11 10 April 2006
82 2.000_10 13 March 2006
84 * Changed gzread so that its behaviour matches C::Z::gzread 1.x if it
85 is called after eof. In this case it will write an empty string
86 into the output parameter. This change is solely for backward
87 compatability reasons.
95 * Breakout zlib specific code into separate modules.
97 * Limited support for reading/writing zip files
99 2.000_06 5 October 2005
101 * Added eof parameter to Compress::Zlib::inflate method.
103 * Fixed issue with 64-bit
105 2.000_05 4 October 2005
107 * Renamed IO::* to IO::Compress::* & IO::Uncompress::*
109 2.000_04 23 September 2005
111 * Fixed some more non-portable test that were failing on VMS.
113 * fixed problem where error messages in the oneshot interface were
116 2.000_03 12 September 2005
118 * Fixed some non-portable test that were failing on VMS.
120 * Fixed export of zlib constants from the IO::* classes
122 2.000_02 6 September 2005
124 * Split Append mode into Append and Merge
126 * Fixed typos in the documentation.
130 * Added libscan to Makefile.PL
132 * Added InputLength for IO::Gunzip et al
134 2.000_01 22 August 2005
136 * Fixed VERSION in Compress::Gzip::Constants
138 * Removed Compress::Gzip::Info from the distribution.
140 2.000_00 21 August 2005
142 * First Beta relase of Compress::zlib rewrite.
144 1.38 - 6 September 2005
146 * Integrate core change 25304 -- Symbian Update
148 * Added libscan to Makefile.PL
150 1.37 - 12 August 2005
152 * Change to t/03examples.t for VMS from Abe Timmerman
156 * Renamed zlib-src-1.2.3 to zlib-src to help VMS
158 * Fixed Makefile.PL for VMS
160 * Fixed t/03examples.t for VMS
162 * Added a couple of notes about incompatibility with Unix compress.
166 * Updated zlib source to 1.2.3
168 * Fixed problem with where two calls to gzclose would hang the debugger.
169 See https://rt.cpan.org/Ticket/Display.html?id=13789
171 * Added code from Alexey Tourbin to use XSLoader when available,
172 and DynaLoader otherwise.
174 * Documented that the compress & uncompress functions were not
175 the same as the Unix utilities of the same name.
177 * Fixed 05gzsetp -- it left a temp file hanging around.
179 * Integrate core change 24787 - SvUPGRADE returns void in blead
181 * Integrate core change 24788 - Makefile.PL adjustments for the core
184 1.34 - 30 January 2005
186 * Fixed typo in the README
188 * Fixed examples.t on Win32 where paths have embedded whitespace.
190 * Fix for Cygwin and core integration from Jos I. Boumans
192 * Upgrade zlib source to 1.2.2
194 1.33 - 14 January 2004
196 * Reworked Makefile.PL to avoid creating a private copy of zlib.
197 This both simplifies the build, plus it makes life easier for VMS.
199 * Patches for Makefile.PL to get it to work on VMS supplied by
202 * memGunzip has very slow on FreeBSD. Turns out to be down to
203 the way realloc works on FreeBSD. Changed both inflate & deflate
204 to use exponentially increasing buffer sizes when they need to
205 realloc. Thanks to Peter Jeremy for the lowdown on FreeBSD
208 1.32 - 26 November 2003
210 * Steve Hay reported a problem on rt.cpan.org with Windows and
211 MSCV++ 6.0 where the source from the zlib directory was getting
212 installed with the rest of the module.
213 https://rt.cpan.org/Ticket/Display.html?id=1741
215 This has been fixed by renaming the "zlib" directory to "zlib-src"
216 thus avoiding a conflict with the name of this Perl module.
218 * Fixed a bug in the inflate method where the input buffer is an
219 lvalue (via substr). Problem & solution reported by Salvador Fandiqo.
221 * Tightened up the logic in Makefile.PL when BUILD_ZLIB is
222 True. Issue spotted by Ralf S. Engelschall.
224 1.31 - 29 October 2003
226 * Reinstated the creation of .bak files - $^I seems to need a
227 backup file on Windows. For OpenVMS, the extenstion _bak is used.
229 1.30 - 28 October 2003
231 * Bundled a sub-set of the zlib source with the module and changed
232 the default make behaviour to build with the included zlib source.
233 The previous behaviour of using a pre-built zlib library is
234 still available for those that want it.
236 * Added prototypes to the subs in Zlib.pm that didn't already have
237 them. Patch from Ed Avis.
239 * No .bak files are created by Makefile.PL any more - this keep
240 distclean much happier. Patch suggested by Ed Avis.
241 This also fixes a similar problem reported by Dr. Martin Zinser
244 * Documentation for some of the gz functions updated.
246 * Format strings modified in DispStream to keep OpenVMS happy.
247 Problem reported by Dr. Martin Zinser.
252 * Makefile.PL now displays a warning about not installing
253 Compress::Zlib via the CPAN shell.
255 * Fix to allow intermingling of gzread & gzreadline - patch
256 supplied by Doug Perham.
258 * memGunzip will silently now work if the gzip trailer is
259 missing. Some HTTP Origin Servers seem to leave it out.
263 * Tests 148 & 150 from t/02zlib.t were failing on redhat 9.
265 * Added a few words about the problems with Mac OS X to the README file.
269 * Fixed bug in gzopen where $gzerrno wasn't being set correctly.
270 The symptom was $gzerrno was set to Z_MEM_ERROR although the file
271 was opened ok. If gzopen failed, $gzerrno was being set correctly.
272 This problem wasn't spotted before because the typical test
273 to determine whether gzopen passed or failed was to check its
276 1.19 - 31 October 2002
278 * fixed a problem with t/02zlib.t that was failing with redhat 8.
280 1.18 - 24 October 2002
282 * fixed a Win32 problem in t/02zlib.t by changing sysread to read.
284 * zlib 1.0.5 & older doesn't have gzsetparams & gzeof. Added a new
285 variable to config.in to flag an old version of zlib. Split
286 out the tests for gzsetparams into t/05gzsetp.t
290 * Moved the test to check the versions of libz & zlib.h into a separate
291 file and added troubleshooting notes to README.
293 * In gzopen, only attempt to call "tell" for normal files.
295 * Fixed to work in taint mode.
297 * Broke changes out of README into Changes file.
299 * Replaced internal use of Z_PARTIAL_FLUSH symbol with Z_SYNC_FLUSH.
300 zlib.h says /* will be removed, use Z_SYNC_FLUSH instead */
302 1.16 - 13 December 2001
304 * Fixed bug in Makefile.PL that stopped "perl Makefile.PL PREFIX=..."
307 1.15 - 4th December 2001
309 * Changes a few types to get the module to build on 64-bit Solaris
311 * Changed the up/downgrade logic to default to the older constructs, and
312 to only call a downgrade if specifically requested. Some older versions
313 of Perl were having problems with the in-place edit.
315 * added the new XS constant code.
317 1.14 - 27th August 2001
319 * Memory overwrite bug fixed in "inflate". Kudos to Rob Simons for
320 reporting the bug and to Anton Berezin for fixing it for me.
322 1.13 - 31st June 2001
324 * Make sure config.in is consistant when released.
326 1.12 - 28th April 2001
328 * Modified Makefile.PL to only enable the warnings pragma if
329 using perl 5.6.1 or better.
331 1.11 - 17th February 2001
333 * Added logic in Makefile.PL to toggle between using $^W and
334 the warnings pragma in the module.
336 * The module, the examples & the test harness are now all strict
339 1.10 - 5th February 2001
341 * fixed a bug in memGunzip. Used Z_ERR instead of Z_DATA_ERROR.
343 1.09 - 15th January 2001
345 * Silenced a few compiler warnings.
347 * Updated zlib home site in README & Zlib.pm to www.info-zip.org
349 * Minor typo in Zlib.pm - a link used AUTHORS instead of AUTHOR
350 -- spotted by Frank Martini.
352 * Mention Archive::Zip
354 * added memGunzip. This is largely based on code provided by Jim Leonard.
356 * $deflate->flush can now take an optional parameter. Valid
357 values are Z_NO_FLUSH, Z_PARTIAL_FLUSH, Z_SYNC_FLUSH, Z_FULL_FLUSH
358 and Z_FINISH. The default is Z_FINISH.
362 * uncompress was clobbering its input parameter. Now it doesn't.
363 This bug was spotted by Deven T. Corzine.
365 * If a variable that only ever contained a number was given
366 to compress or deflate, it would not be compressed properly. Now
367 it will be coerced to a string and then compressed. This bug
368 was spotted by Deven T. Corzine.
372 * ANSI-ified the static functions in Zlib.xs
374 * Added the ability to build zlib along with the module.
375 This feature is 90% based on a Makefile provided by Gurusamy
380 * Fixed a nasty problem where inflate could truncate the data
381 returned. Thanks to Douglas Thomson <dougt@mugc.cc.monash.edu.au>
382 for both spotting the problem and fixing the bug.
384 * Added a note about the undocumented features in zlib that are
385 required when accessing zip files.
387 * gzclose will now get called automatically when the gzip object is
392 * Previous release used newSVpvn, which doesn't exist in 5.004_04
393 or earlier. Changed to use newSVpv instead.
395 * The module needs Perl 5.004 or better, so updated the version
396 checking in Zlib.pm and Makefile.PL
400 * Bug 19990527.001: compress(undef) core dumps -- Fixed.
404 * Updated to use the new PL_ symbols.
405 Means the module can be built with Perl 5.005_5*
409 * The return codes for gzread, gzreadline and gzwrite were
410 documented incorrectly as returning a status code.
412 * The test harness was missing a "gzclose". This caused problem
413 showed up on an amiga. Thanks to Erik van Roode for reporting
416 * Patched zlib.t for OS/2. Thanks to Ilya Zakharevich for the patch.
420 * A number of fixes to the test suite and the example scripts to
421 allow them to work under win32. All courtesy of Gurusamy
426 * Fixed crc32 & adler32. They were very broken.
428 * The following functions can now take a scalar reference in
429 place of a scalar for their buffer parameters:
438 This should mean applications that make use of the module don't
439 have to copy large buffers around.
442 * Normally the inflate method consumes I<all> of the input buffer
443 before returning. The exception to this is when inflate detects
444 the end of the stream (Z_STREAM_END). In this case the input
445 buffer need not be completely consumed. To allow processing of
446 file formats that embed a deflation stream (e.g. zip, gzip),
447 the inflate method now sets the buffer parameter to be what
448 remains after inflation.
450 When the return status is Z_STREAM_END, it will be what remains
451 of the buffer (if any) after deflation. When the status is Z_OK
452 it will be an empty string.
454 This change means that the buffer parameter must be a lvalue.
456 * Fixed crc32 and adler32. They were both very broken.
458 * Added the Compress::Zlib::memGzip function.
460 0.5 - Confirmed that no changes were necessary for zlib 1.0.3, or 1.0.4.
462 The optional parameters for deflateInit and inflateInit can now
463 be specified as an associative array in addition to a reference
464 to an associative array. They can also accept the -Name
467 gzopen can now optionally take a reference to an open
468 filehandle in place of a filename. In this case it will call
471 Added gzstream example script.
473 0.4 - Upgrade to support zlib 0.99
475 Added dictionary interface.
477 Fixed bug in gzreadline - previously it would keep returning
478 the same buffer. This bug was reported by Helmut Jarausch
480 Removed dependency to zutil.h and so dropped support for
482 DEF_MEM_LEVEL (use MAX_MEM_LEVEL instead)
483 DEF_WBITS (use MAX_WBITS instead)
485 0.3 - Added prototype specification.
487 0.2 - Fixed a minor allocation problem in Zlib.xs
489 0.1 - first alpha release. 2nd October 1995