3 * Copyright (C) 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
4 * 2000, 2001, 2002, 2003, 2004, 2005, 2006 by Larry Wall and others
6 * You may distribute under the terms of either the GNU General Public
7 * License or the Artistic License, as specified in the README file.
9 * Control ops (cops) are one of the three ops OP_NEXTSTATE, OP_DBSTATE,
10 * and OP_SETSTATE that (loosely speaking) are separate statements.
11 * They hold information important for lexical state and error reporting.
12 * At run time, PL_curcop is set to point to the most recently executed cop,
13 * and thus can be used to determine our current state.
16 /* A jmpenv packages the state required to perform a proper non-local jump.
17 * Note that there is a start_env initialized when perl starts, and top_env
18 * points to this initially, so top_env should always be non-null.
20 * Existence of a non-null top_env->je_prev implies it is valid to call
21 * longjmp() at that runlevel (we make sure start_env.je_prev is always
22 * null to ensure this).
24 * je_mustcatch, when set at any runlevel to TRUE, means eval ops must
25 * establish a local jmpenv to handle exception traps. Care must be taken
26 * to restore the previous value of je_mustcatch before exiting the
27 * stack frame iff JMPENV_PUSH was not called in that stack frame.
32 struct jmpenv * je_prev;
33 Sigjmp_buf je_buf; /* only for use if !je_throw */
34 int je_ret; /* last exception thrown */
35 bool je_mustcatch; /* need to call longjmp()? */
38 typedef struct jmpenv JMPENV;
41 #define OP_REG_TO_MEM PL_opsave = op
42 #define OP_MEM_TO_REG op = PL_opsave
44 #define OP_REG_TO_MEM NOOP
45 #define OP_MEM_TO_REG NOOP
49 * How to build the first jmpenv.
51 * top_env needs to be non-zero. It points to an area
52 * in which longjmp() stuff is stored, as C callstack
53 * info there at least is thread specific this has to
54 * be per-thread. Otherwise a 'die' in a thread gives
55 * that thread the C stack of last thread to do an eval {}!
58 #define JMPENV_BOOTSTRAP \
60 Zero(&PL_start_env, 1, JMPENV); \
61 PL_start_env.je_ret = -1; \
62 PL_start_env.je_mustcatch = TRUE; \
63 PL_top_env = &PL_start_env; \
67 * PERL_FLEXIBLE_EXCEPTIONS
69 * All the flexible exceptions code has been removed.
70 * See the following threads for details:
72 * http://www.xray.mpe.mpg.de/mailing-lists/perl5-porters/2004-07/msg00378.html
74 * Joshua's original patches (which weren't applied) and discussion:
76 * http://www.xray.mpe.mpg.de/mailing-lists/perl5-porters/1998-02/msg01396.html
77 * http://www.xray.mpe.mpg.de/mailing-lists/perl5-porters/1998-02/msg01489.html
78 * http://www.xray.mpe.mpg.de/mailing-lists/perl5-porters/1998-02/msg01491.html
79 * http://www.xray.mpe.mpg.de/mailing-lists/perl5-porters/1998-02/msg01608.html
80 * http://www.xray.mpe.mpg.de/mailing-lists/perl5-porters/1998-02/msg02144.html
81 * http://www.xray.mpe.mpg.de/mailing-lists/perl5-porters/1998-02/msg02998.html
83 * Chip's reworked patch and discussion:
85 * http://www.xray.mpe.mpg.de/mailing-lists/perl5-porters/1999-03/msg00520.html
87 * The flaw in these patches (which went unnoticed at the time) was
88 * that they moved some code that could potentially die() out of the
89 * region protected by the setjmp()s. This caused exceptions within
90 * END blocks and such to not be handled by the correct setjmp().
92 * The original patches that introduces flexible exceptions were:
94 * http://public.activestate.com/cgi-bin/perlbrowse?patch=3386
95 * http://public.activestate.com/cgi-bin/perlbrowse?patch=5162
98 #define dJMPENV JMPENV cur_env
100 #define JMPENV_PUSH(v) \
102 DEBUG_l(Perl_deb(aTHX_ "Setting up jumplevel %p, was %p\n", \
103 (void*)&cur_env, (void*)PL_top_env)); \
104 cur_env.je_prev = PL_top_env; \
106 cur_env.je_ret = PerlProc_setjmp(cur_env.je_buf, SCOPE_SAVES_SIGNAL_MASK); \
108 PL_top_env = &cur_env; \
109 cur_env.je_mustcatch = FALSE; \
110 (v) = cur_env.je_ret; \
115 DEBUG_l(Perl_deb(aTHX_ "popping jumplevel was %p, now %p\n", \
116 (void*)PL_top_env, (void*)cur_env.je_prev)); \
117 PL_top_env = cur_env.je_prev; \
120 #define JMPENV_JUMP(v) \
123 if (PL_top_env->je_prev) \
124 PerlProc_longjmp(PL_top_env->je_buf, (v)); \
126 PerlProc_exit(STATUS_EXIT); \
127 PerlIO_printf(PerlIO_stderr(), "panic: top_env\n"); \
131 #define CATCH_GET (PL_top_env->je_mustcatch)
132 #define CATCH_SET(v) (PL_top_env->je_mustcatch = (v))
138 char * cop_label; /* label for this construct */
140 char * cop_stashpv; /* package line was compiled in */
141 char * cop_file; /* file name the following line # is from */
143 HV * cop_stash; /* package line was compiled in */
144 GV * cop_filegv; /* file the following line # is from */
146 U32 cop_hints; /* hints bits from pragmata */
147 U32 cop_seq; /* parse sequence number */
148 line_t cop_line; /* line # of this command */
149 /* Beware. mg.c and warnings.pl assume the type of this is STRLEN *: */
150 STRLEN * cop_warnings; /* lexical warnings bitmask */
151 /* compile time state of %^H. See the comment in op.c for how this is
152 used to recreate a hash to return from caller. */
153 struct refcounted_he * cop_hints_hash;
157 # define CopFILE(c) ((c)->cop_file)
158 # define CopFILEGV(c) (CopFILE(c) \
159 ? gv_fetchfile(CopFILE(c)) : NULL)
162 # define CopFILE_set(c,pv) ((c)->cop_file = savepv(pv))
164 # define CopFILE_set(c,pv) ((c)->cop_file = savesharedpv(pv))
167 # define CopFILESV(c) (CopFILE(c) \
168 ? GvSV(gv_fetchfile(CopFILE(c))) : NULL)
169 # define CopFILEAV(c) (CopFILE(c) \
170 ? GvAV(gv_fetchfile(CopFILE(c))) : NULL)
172 # define CopFILEAVx(c) (assert(CopFILE(c)), \
173 GvAV(gv_fetchfile(CopFILE(c))))
175 # define CopFILEAVx(c) (GvAV(gv_fetchfile(CopFILE(c))))
177 # define CopSTASHPV(c) ((c)->cop_stashpv)
180 # define CopSTASHPV_set(c,pv) ((c)->cop_stashpv = ((pv) ? savepv(pv) : NULL))
182 # define CopSTASHPV_set(c,pv) ((c)->cop_stashpv = savesharedpv(pv))
185 # define CopSTASH(c) (CopSTASHPV(c) \
186 ? gv_stashpv(CopSTASHPV(c),GV_ADD) : NULL)
187 # define CopSTASH_set(c,hv) CopSTASHPV_set(c, (hv) ? HvNAME_get(hv) : NULL)
188 # define CopSTASH_eq(c,hv) ((hv) && stashpv_hvname_match(c,hv))
190 # define CopSTASH_free(c) SAVECOPSTASH_FREE(c)
191 # define CopFILE_free(c) SAVECOPFILE_FREE(c)
193 # define CopSTASH_free(c) PerlMemShared_free(CopSTASHPV(c))
194 # define CopFILE_free(c) (PerlMemShared_free(CopFILE(c)),(CopFILE(c) = NULL))
197 # define CopFILEGV(c) ((c)->cop_filegv)
198 # define CopFILEGV_set(c,gv) ((c)->cop_filegv = (GV*)SvREFCNT_inc(gv))
199 # define CopFILE_set(c,pv) CopFILEGV_set((c), gv_fetchfile(pv))
200 # define CopFILESV(c) (CopFILEGV(c) ? GvSV(CopFILEGV(c)) : NULL)
201 # define CopFILEAV(c) (CopFILEGV(c) ? GvAV(CopFILEGV(c)) : NULL)
203 # define CopFILEAVx(c) (assert(CopFILEGV(c)), GvAV(CopFILEGV(c)))
205 # define CopFILEAVx(c) (GvAV(CopFILEGV(c)))
207 # define CopFILE(c) (CopFILESV(c) ? SvPVX(CopFILESV(c)) : NULL)
208 # define CopSTASH(c) ((c)->cop_stash)
209 # define CopSTASH_set(c,hv) ((c)->cop_stash = (hv))
210 # define CopSTASHPV(c) (CopSTASH(c) ? HvNAME_get(CopSTASH(c)) : NULL)
211 /* cop_stash is not refcounted */
212 # define CopSTASHPV_set(c,pv) CopSTASH_set((c), gv_stashpv(pv,GV_ADD))
213 # define CopSTASH_eq(c,hv) (CopSTASH(c) == (hv))
214 # define CopSTASH_free(c)
215 # define CopFILE_free(c) (SvREFCNT_dec(CopFILEGV(c)),(CopFILEGV(c) = NULL))
217 #endif /* USE_ITHREADS */
219 #define CopSTASH_ne(c,hv) (!CopSTASH_eq(c,hv))
220 #define CopLINE(c) ((c)->cop_line)
221 #define CopLINE_inc(c) (++CopLINE(c))
222 #define CopLINE_dec(c) (--CopLINE(c))
223 #define CopLINE_set(c,l) (CopLINE(c) = (l))
225 /* OutCopFILE() is CopFILE for output (caller, die, warn, etc.) */
226 #ifdef MACOS_TRADITIONAL
227 # define OutCopFILE(c) MacPerl_MPWFileName(CopFILE(c))
229 # define OutCopFILE(c) CopFILE(c)
232 /* If $[ is non-zero, it's stored in cop_hints under the key "$[", and
233 HINT_ARYBASE is set to indicate this.
234 Setting it is ineficient due to the need to create 2 mortal SVs, but as
235 using $[ is highly discouraged, no sane Perl code will be using it. */
236 #define CopARYBASE_get(c) \
237 ((CopHINTS_get(c) & HINT_ARYBASE) \
238 ? SvIV(Perl_refcounted_he_fetch(aTHX_ (c)->cop_hints_hash, 0, \
241 #define CopARYBASE_set(c, b) STMT_START { \
242 if (b || ((c)->cop_hints & HINT_ARYBASE)) { \
243 (c)->cop_hints |= HINT_ARYBASE; \
244 if ((c) == &PL_compiling) \
245 PL_hints |= HINT_LOCALIZE_HH | HINT_ARYBASE; \
246 (c)->cop_hints_hash \
247 = Perl_refcounted_he_new(aTHX_ (c)->cop_hints_hash, \
248 sv_2mortal(newSVpvs("$[")), \
249 sv_2mortal(newSViv(b))); \
253 /* FIXME NATIVE_HINTS if this is changed from op_private (see perl.h) */
254 #define CopHINTS_get(c) ((c)->cop_hints + 0)
255 #define CopHINTS_set(c, h) STMT_START { \
256 (c)->cop_hints = (h); \
260 * Here we have some enormously heavy (or at least ponderous) wizardry.
263 /* subroutine context */
272 U8 lval; /* XXX merge lval and hasargs? */
274 OP * retop; /* op to execute on exit from sub */
277 /* base for the next two macros. Don't use directly.
278 * Note that the refcnt of the cv is incremented twice; The CX one is
279 * decremented by LEAVESUB, the other by LEAVE. */
281 #define PUSHSUB_BASE(cx) \
282 cx->blk_sub.cv = cv; \
283 cx->blk_sub.olddepth = CvDEPTH(cv); \
284 cx->blk_sub.hasargs = hasargs; \
285 cx->blk_sub.retop = NULL; \
286 if (!CvDEPTH(cv)) { \
287 SvREFCNT_inc_simple_void_NN(cv); \
288 SvREFCNT_inc_simple_void_NN(cv); \
293 #define PUSHSUB(cx) \
295 cx->blk_sub.lval = PL_op->op_private & \
296 (OPpLVAL_INTRO|OPpENTERSUB_INARGS);
298 /* variant for use by OP_DBSTATE, where op_private holds hint bits */
299 #define PUSHSUB_DB(cx) \
301 cx->blk_sub.lval = 0;
304 #define PUSHFORMAT(cx) \
305 cx->blk_sub.cv = cv; \
306 cx->blk_sub.gv = gv; \
307 cx->blk_sub.retop = NULL; \
308 cx->blk_sub.hasargs = 0; \
309 cx->blk_sub.dfoutgv = PL_defoutgv; \
310 SvREFCNT_inc_void(cx->blk_sub.dfoutgv)
312 #define POP_SAVEARRAY() \
314 SvREFCNT_dec(GvAV(PL_defgv)); \
315 GvAV(PL_defgv) = cx->blk_sub.savearray; \
318 /* junk in @_ spells trouble when cloning CVs and in pp_caller(), so don't
319 * leave any (a fast av_clear(ary), basically) */
320 #define CLEAR_ARGARRAY(ary) \
322 AvMAX(ary) += AvARRAY(ary) - AvALLOC(ary); \
323 SvPV_set(ary, (char*)AvALLOC(ary)); \
327 #define POPSUB(cx,sv) \
329 if (cx->blk_sub.hasargs) { \
331 /* abandon @_ if it got reified */ \
332 if (AvREAL(cx->blk_sub.argarray)) { \
333 const SSize_t fill = AvFILLp(cx->blk_sub.argarray); \
334 SvREFCNT_dec(cx->blk_sub.argarray); \
335 cx->blk_sub.argarray = newAV(); \
336 av_extend(cx->blk_sub.argarray, fill); \
337 AvREIFY_only(cx->blk_sub.argarray); \
338 CX_CURPAD_SV(cx->blk_sub, 0) = (SV*)cx->blk_sub.argarray; \
341 CLEAR_ARGARRAY(cx->blk_sub.argarray); \
344 sv = (SV*)cx->blk_sub.cv; \
345 if (sv && (CvDEPTH((CV*)sv) = cx->blk_sub.olddepth)) \
349 #define LEAVESUB(sv) \
355 #define POPFORMAT(cx) \
356 setdefout(cx->blk_sub.dfoutgv); \
357 SvREFCNT_dec(cx->blk_sub.dfoutgv);
367 OP * retop; /* op to execute on exit from eval */
368 JMPENV * cur_top_env; /* value of PL_top_env when eval CX created */
371 #define PUSHEVAL(cx,n,fgv) \
373 cx->blk_eval.old_in_eval = PL_in_eval; \
374 cx->blk_eval.old_op_type = PL_op->op_type; \
375 cx->blk_eval.old_namesv = (n ? newSVpv(n,0) : NULL); \
376 cx->blk_eval.old_eval_root = PL_eval_root; \
377 cx->blk_eval.cur_text = PL_linestr; \
378 cx->blk_eval.cv = NULL; /* set by doeval(), as applicable */ \
379 cx->blk_eval.retop = NULL; \
380 cx->blk_eval.cur_top_env = PL_top_env; \
383 #define POPEVAL(cx) \
385 PL_in_eval = cx->blk_eval.old_in_eval; \
386 optype = cx->blk_eval.old_op_type; \
387 PL_eval_root = cx->blk_eval.old_eval_root; \
388 if (cx->blk_eval.old_namesv) \
389 sv_2mortal(cx->blk_eval.old_namesv); \
396 LOOP * my_op; /* My op, that contains redo, next and last ops. */
397 /* (except for non_ithreads we need to modify next_op in pp_ctl.c, hence
398 why next_op is conditionally defined below.) */
407 /* (from inspection of source code) for a .. range of strings this is the
410 /* (from inspection of source code) for a foreach loop this is the array
411 being iterated over. For a .. range of numbers it's the current value.
412 A check is often made on the SvTYPE of iterary to determine whether
413 we are iterating over an array or a range. (numbers or strings) */
416 /* (from inspection of source code) for a .. range of numbers this is the
420 /* It might be possible to squeeze this structure further. As best I can tell
421 itermax and iterlval are never used at the same time, so it might be possible
422 to make them into a union. However, I'm not confident that there are enough
423 flag bits/NULLable pointers in this structure alone to encode which is
424 active. There is, however, U8 of space free in struct block, which could be
425 used. Right now it may not be worth squeezing this structure further, as it's
426 the largest part of struct block, and currently struct block is 64 bytes on
427 an ILP32 system, which will give good cache alignment.
431 # define CxITERVAR(c) \
432 ((c)->blk_loop.iterdata \
434 ? &CX_CURPAD_SV( (c)->blk_loop, \
435 INT2PTR(PADOFFSET, (c)->blk_loop.iterdata)) \
436 : &GvSV((GV*)(c)->blk_loop.iterdata)) \
438 # define CX_ITERDATA_SET(cx,idata) \
439 CX_CURPAD_SAVE(cx->blk_loop); \
440 if ((cx->blk_loop.iterdata = (idata))) \
441 cx->blk_loop.itersave = SvREFCNT_inc(*CxITERVAR(cx)); \
443 cx->blk_loop.itersave = NULL;
445 # define CxITERVAR(c) ((c)->blk_loop.itervar)
446 # define CX_ITERDATA_SET(cx,ivar) \
447 if ((cx->blk_loop.itervar = (SV**)(ivar))) \
448 cx->blk_loop.itersave = SvREFCNT_inc(*CxITERVAR(cx)); \
450 cx->blk_loop.itersave = NULL;
454 # define PUSHLOOP_OP_NEXT /* No need to do anything. */
455 # define CX_LOOP_NEXTOP_GET(cx) ((cx)->blk_loop.my_op->op_nextop + 0)
457 # define PUSHLOOP_OP_NEXT cx->blk_loop.next_op = cLOOP->op_nextop
458 # define CX_LOOP_NEXTOP_GET(cx) ((cx)->blk_loop.next_op + 0)
461 #define PUSHLOOP(cx, dat, s) \
462 cx->blk_loop.label = PL_curcop->cop_label; \
463 cx->blk_loop.resetsp = s - PL_stack_base; \
464 cx->blk_loop.my_op = cLOOP; \
466 cx->blk_loop.iterlval = NULL; \
467 cx->blk_loop.iterary = NULL; \
468 cx->blk_loop.iterix = -1; \
469 CX_ITERDATA_SET(cx,dat);
471 #define POPLOOP(cx) \
472 SvREFCNT_dec(cx->blk_loop.iterlval); \
473 if (CxITERVAR(cx)) { \
474 if (SvPADMY(cx->blk_loop.itersave)) { \
475 SV ** const s_v_p = CxITERVAR(cx); \
476 sv_2mortal(*s_v_p); \
477 *s_v_p = cx->blk_loop.itersave; \
480 SvREFCNT_dec(cx->blk_loop.itersave); \
483 if (cx->blk_loop.iterary && cx->blk_loop.iterary != PL_curstack)\
484 SvREFCNT_dec(cx->blk_loop.iterary);
486 /* given/when context */
487 struct block_givwhen {
491 #define PUSHGIVEN(cx) \
492 cx->blk_givwhen.leave_op = cLOGOP->op_other;
494 #define PUSHWHEN PUSHGIVEN
496 /* context common to subroutines, evals and loops */
498 U16 blku_type; /* what kind of context this is */
499 U8 blku_gimme; /* is this block running in list context? */
500 I32 blku_oldsp; /* stack pointer to copy stuff down to */
501 COP * blku_oldcop; /* old curcop pointer */
502 I32 blku_oldmarksp; /* mark stack index */
503 I32 blku_oldscopesp; /* scope stack index */
504 PMOP * blku_oldpm; /* values of pattern match vars */
507 struct block_sub blku_sub;
508 struct block_eval blku_eval;
509 struct block_loop blku_loop;
510 struct block_givwhen blku_givwhen;
513 #define blk_oldsp cx_u.cx_blk.blku_oldsp
514 #define blk_oldcop cx_u.cx_blk.blku_oldcop
515 #define blk_oldmarksp cx_u.cx_blk.blku_oldmarksp
516 #define blk_oldscopesp cx_u.cx_blk.blku_oldscopesp
517 #define blk_oldpm cx_u.cx_blk.blku_oldpm
518 #define blk_gimme cx_u.cx_blk.blku_gimme
519 #define blk_sub cx_u.cx_blk.blk_u.blku_sub
520 #define blk_eval cx_u.cx_blk.blk_u.blku_eval
521 #define blk_loop cx_u.cx_blk.blk_u.blku_loop
522 #define blk_givwhen cx_u.cx_blk.blk_u.blku_givwhen
525 #define PUSHBLOCK(cx,t,sp) CXINC, cx = &cxstack[cxstack_ix], \
527 cx->blk_oldsp = sp - PL_stack_base, \
528 cx->blk_oldcop = PL_curcop, \
529 cx->blk_oldmarksp = PL_markstack_ptr - PL_markstack, \
530 cx->blk_oldscopesp = PL_scopestack_ix, \
531 cx->blk_oldpm = PL_curpm, \
532 cx->blk_gimme = (U8)gimme; \
533 DEBUG_l( PerlIO_printf(Perl_debug_log, "Entering block %ld, type %s\n", \
534 (long)cxstack_ix, PL_block_type[CxTYPE(cx)]); )
536 /* Exit a block (RETURN and LAST). */
537 #define POPBLOCK(cx,pm) cx = &cxstack[cxstack_ix--], \
538 newsp = PL_stack_base + cx->blk_oldsp, \
539 PL_curcop = cx->blk_oldcop, \
540 PL_markstack_ptr = PL_markstack + cx->blk_oldmarksp, \
541 PL_scopestack_ix = cx->blk_oldscopesp, \
542 pm = cx->blk_oldpm, \
543 gimme = cx->blk_gimme; \
544 DEBUG_SCOPE("POPBLOCK"); \
545 DEBUG_l( PerlIO_printf(Perl_debug_log, "Leaving block %ld, type %s\n", \
546 (long)cxstack_ix+1,PL_block_type[CxTYPE(cx)]); )
548 /* Continue a block elsewhere (NEXT and REDO). */
549 #define TOPBLOCK(cx) cx = &cxstack[cxstack_ix], \
550 PL_stack_sp = PL_stack_base + cx->blk_oldsp, \
551 PL_markstack_ptr = PL_markstack + cx->blk_oldmarksp, \
552 PL_scopestack_ix = cx->blk_oldscopesp, \
553 PL_curpm = cx->blk_oldpm; \
554 DEBUG_SCOPE("TOPBLOCK");
556 /* substitution context */
558 U16 sbu_type; /* what kind of context this is */
574 #define sb_iters cx_u.cx_subst.sbu_iters
575 #define sb_maxiters cx_u.cx_subst.sbu_maxiters
576 #define sb_rflags cx_u.cx_subst.sbu_rflags
577 #define sb_oldsave cx_u.cx_subst.sbu_oldsave
578 #define sb_once cx_u.cx_subst.sbu_once
579 #define sb_rxtainted cx_u.cx_subst.sbu_rxtainted
580 #define sb_orig cx_u.cx_subst.sbu_orig
581 #define sb_dstr cx_u.cx_subst.sbu_dstr
582 #define sb_targ cx_u.cx_subst.sbu_targ
583 #define sb_s cx_u.cx_subst.sbu_s
584 #define sb_m cx_u.cx_subst.sbu_m
585 #define sb_strend cx_u.cx_subst.sbu_strend
586 #define sb_rxres cx_u.cx_subst.sbu_rxres
587 #define sb_rx cx_u.cx_subst.sbu_rx
589 #define PUSHSUBST(cx) CXINC, cx = &cxstack[cxstack_ix], \
590 cx->sb_iters = iters, \
591 cx->sb_maxiters = maxiters, \
592 cx->sb_rflags = r_flags, \
593 cx->sb_oldsave = oldsave, \
594 cx->sb_once = once, \
595 cx->sb_rxtainted = rxtainted, \
596 cx->sb_orig = orig, \
597 cx->sb_dstr = dstr, \
598 cx->sb_targ = targ, \
601 cx->sb_strend = strend, \
602 cx->sb_rxres = NULL, \
604 cx->cx_type = CXt_SUBST; \
605 rxres_save(&cx->sb_rxres, rx); \
606 (void)ReREFCNT_inc(rx)
608 #define POPSUBST(cx) cx = &cxstack[cxstack_ix--]; \
609 rxres_free(&cx->sb_rxres); \
610 ReREFCNT_dec(cx->sb_rx)
615 struct subst cx_subst;
618 #define cx_type cx_u.cx_subst.sbu_type
620 #define CXTYPEMASK 0xff
631 /* private flags for CXt_SUB and CXt_NULL */
632 #define CXp_MULTICALL 0x00000400 /* part of a multicall (so don't
633 tear down context on exit). */
635 /* private flags for CXt_EVAL */
636 #define CXp_REAL 0x00000100 /* truly eval'', not a lookalike */
637 #define CXp_TRYBLOCK 0x00000200 /* eval{}, not eval'' or similar */
639 /* private flags for CXt_LOOP */
640 #define CXp_FOREACH 0x00000200 /* a foreach loop */
641 #define CXp_FOR_DEF 0x00000400 /* foreach using $_ */
643 # define CXp_PADVAR 0x00000100 /* itervar lives on pad, iterdata
644 has pad offset; if not set,
645 iterdata holds GV* */
646 # define CxPADLOOP(c) (((c)->cx_type & (CXt_LOOP|CXp_PADVAR)) \
647 == (CXt_LOOP|CXp_PADVAR))
650 #define CxTYPE(c) ((c)->cx_type & CXTYPEMASK)
651 #define CxMULTICALL(c) (((c)->cx_type & CXp_MULTICALL) \
653 #define CxREALEVAL(c) (((c)->cx_type & (CXt_EVAL|CXp_REAL)) \
654 == (CXt_EVAL|CXp_REAL))
655 #define CxTRYBLOCK(c) (((c)->cx_type & (CXt_EVAL|CXp_TRYBLOCK)) \
656 == (CXt_EVAL|CXp_TRYBLOCK))
657 #define CxFOREACH(c) (((c)->cx_type & (CXt_LOOP|CXp_FOREACH)) \
658 == (CXt_LOOP|CXp_FOREACH))
659 #define CxFOREACHDEF(c) (((c)->cx_type & (CXt_LOOP|CXp_FOREACH|CXp_FOR_DEF))\
660 == (CXt_LOOP|CXp_FOREACH|CXp_FOR_DEF))
662 #define CXINC (cxstack_ix < cxstack_max ? ++cxstack_ix : (cxstack_ix = cxinc()))
665 =head1 "Gimme" Values
669 =for apidoc AmU||G_SCALAR
670 Used to indicate scalar context. See C<GIMME_V>, C<GIMME>, and
673 =for apidoc AmU||G_ARRAY
674 Used to indicate list context. See C<GIMME_V>, C<GIMME> and
677 =for apidoc AmU||G_VOID
678 Used to indicate void context. See C<GIMME_V> and L<perlcall>.
680 =for apidoc AmU||G_DISCARD
681 Indicates that arguments returned from a callback should be discarded. See
684 =for apidoc AmU||G_EVAL
686 Used to force a Perl C<eval> wrapper around a callback. See
689 =for apidoc AmU||G_NOARGS
691 Indicates that no arguments are being sent to a callback. See
699 #define G_VOID 128 /* skip this bit when adding flags below */
701 /* extra flags for Perl_call_* routines */
702 #define G_DISCARD 2 /* Call FREETMPS. */
703 #define G_EVAL 4 /* Assume eval {} around subroutine call. */
704 #define G_NOARGS 8 /* Don't construct a @_ array. */
705 #define G_KEEPERR 16 /* Append errors to $@, don't overwrite it */
706 #define G_NODEBUG 32 /* Disable debugging at toplevel. */
707 #define G_METHOD 64 /* Calling method. */
708 #define G_FAKINGEVAL 256 /* Faking en eval context for call_sv or
711 /* flag bits for PL_in_eval */
712 #define EVAL_NULL 0 /* not in an eval */
713 #define EVAL_INEVAL 1 /* some enclosing scope is an eval */
714 #define EVAL_WARNONLY 2 /* used by yywarn() when calling yyerror() */
715 #define EVAL_KEEPERR 4 /* set by Perl_call_sv if G_KEEPERR */
716 #define EVAL_INREQUIRE 8 /* The code is being required. */
718 /* Support for switching (stack and block) contexts.
719 * This ensures magic doesn't invalidate local stack and cx pointers.
722 #define PERLSI_UNKNOWN -1
723 #define PERLSI_UNDEF 0
724 #define PERLSI_MAIN 1
725 #define PERLSI_MAGIC 2
726 #define PERLSI_SORT 3
727 #define PERLSI_SIGNAL 4
728 #define PERLSI_OVERLOAD 5
729 #define PERLSI_DESTROY 6
730 #define PERLSI_WARNHOOK 7
731 #define PERLSI_DIEHOOK 8
732 #define PERLSI_REQUIRE 9
735 AV * si_stack; /* stack for current runlevel */
736 PERL_CONTEXT * si_cxstack; /* context stack for runlevel */
737 I32 si_cxix; /* current context index */
738 I32 si_cxmax; /* maximum allocated index */
739 I32 si_type; /* type of runlevel */
740 struct stackinfo * si_prev;
741 struct stackinfo * si_next;
742 I32 si_markoff; /* offset where markstack begins for us.
743 * currently used only with DEBUGGING,
744 * but not #ifdef-ed for bincompat */
747 typedef struct stackinfo PERL_SI;
749 #define cxstack (PL_curstackinfo->si_cxstack)
750 #define cxstack_ix (PL_curstackinfo->si_cxix)
751 #define cxstack_max (PL_curstackinfo->si_cxmax)
754 # define SET_MARK_OFFSET \
755 PL_curstackinfo->si_markoff = PL_markstack_ptr - PL_markstack
757 # define SET_MARK_OFFSET NOOP
760 #define PUSHSTACKi(type) \
762 PERL_SI *next = PL_curstackinfo->si_next; \
764 next = new_stackinfo(32, 2048/sizeof(PERL_CONTEXT) - 1); \
765 next->si_prev = PL_curstackinfo; \
766 PL_curstackinfo->si_next = next; \
768 next->si_type = type; \
769 next->si_cxix = -1; \
770 AvFILLp(next->si_stack) = 0; \
771 SWITCHSTACK(PL_curstack,next->si_stack); \
772 PL_curstackinfo = next; \
776 #define PUSHSTACK PUSHSTACKi(PERLSI_UNKNOWN)
778 /* POPSTACK works with PL_stack_sp, so it may need to be bracketed by
779 * PUTBACK/SPAGAIN to flush/refresh any local SP that may be active */
783 PERL_SI * const prev = PL_curstackinfo->si_prev; \
785 PerlIO_printf(Perl_error_log, "panic: POPSTACK\n"); \
788 SWITCHSTACK(PL_curstack,prev->si_stack); \
789 /* don't free prev here, free them all at the END{} */ \
790 PL_curstackinfo = prev; \
793 #define POPSTACK_TO(s) \
795 while (PL_curstack != s) { \
801 #define IN_PERL_COMPILETIME (PL_curcop == &PL_compiling)
802 #define IN_PERL_RUNTIME (PL_curcop != &PL_compiling)
805 =head1 Multicall Functions
807 =for apidoc Ams||dMULTICALL
808 Declare local variables for a multicall. See L<perlcall/Lightweight Callbacks>.
810 =for apidoc Ams||PUSH_MULTICALL
811 Opening bracket for a lightweight callback.
812 See L<perlcall/Lightweight Callbacks>.
814 =for apidoc Ams||MULTICALL
815 Make a lightweight callback. See L<perlcall/Lightweight Callbacks>.
817 =for apidoc Ams||POP_MULTICALL
818 Closing bracket for a lightweight callback.
819 See L<perlcall/Lightweight Callbacks>.
825 SV **newsp; /* set by POPBLOCK */ \
829 bool multicall_oldcatch; \
830 U8 hasargs = 0 /* used by PUSHSUB */
832 #define PUSH_MULTICALL(the_cv) \
834 CV * const _nOnclAshIngNamE_ = the_cv; \
835 CV * const cv = _nOnclAshIngNamE_; \
836 AV * const padlist = CvPADLIST(cv); \
838 multicall_oldcatch = CATCH_GET; \
839 SAVETMPS; SAVEVPTR(PL_op); \
841 PUSHBLOCK(cx, CXt_SUB|CXp_MULTICALL, PL_stack_sp); \
843 if (++CvDEPTH(cv) >= 2) { \
844 PERL_STACK_OVERFLOW_CHECK(); \
845 Perl_pad_push(aTHX_ padlist, CvDEPTH(cv)); \
848 PAD_SET_CUR_NOSAVE(padlist, CvDEPTH(cv)); \
850 multicall_cop = CvSTART(cv); \
855 PL_op = multicall_cop; \
859 #define POP_MULTICALL \
861 LEAVESUB(multicall_cv); \
862 CvDEPTH(multicall_cv)--; \
863 POPBLOCK(cx,PL_curpm); \
864 CATCH_SET(multicall_oldcatch); \
870 * c-indentation-style: bsd
872 * indent-tabs-mode: t
875 * ex: set ts=8 sts=4 sw=4 noet: