3 * Copyright (C) 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
4 * 2000, 2001, 2002, 2003, 2004, by Larry Wall and others
6 * You may distribute under the terms of either the GNU General Public
7 * License or the Artistic License, as specified in the README file.
9 * Control ops (cops) are one of the three ops OP_NEXTSTATE, OP_DBSTATE,
10 * and OP_SETSTATE that (loosely speaking) are separate statements.
11 * They hold information important for lexical state and error reporting.
12 * At run time, PL_curcop is set to point to the most recently executed cop,
13 * and thus can be used to determine our current state.
16 /* A jmpenv packages the state required to perform a proper non-local jump.
17 * Note that there is a start_env initialized when perl starts, and top_env
18 * points to this initially, so top_env should always be non-null.
20 * Existence of a non-null top_env->je_prev implies it is valid to call
21 * longjmp() at that runlevel (we make sure start_env.je_prev is always
22 * null to ensure this).
24 * je_mustcatch, when set at any runlevel to TRUE, means eval ops must
25 * establish a local jmpenv to handle exception traps. Care must be taken
26 * to restore the previous value of je_mustcatch before exiting the
27 * stack frame iff JMPENV_PUSH was not called in that stack frame.
32 struct jmpenv * je_prev;
33 Sigjmp_buf je_buf; /* only for use if !je_throw */
34 int je_ret; /* last exception thrown */
35 bool je_mustcatch; /* need to call longjmp()? */
38 typedef struct jmpenv JMPENV;
41 #define OP_REG_TO_MEM PL_opsave = op
42 #define OP_MEM_TO_REG op = PL_opsave
44 #define OP_REG_TO_MEM NOOP
45 #define OP_MEM_TO_REG NOOP
49 * How to build the first jmpenv.
51 * top_env needs to be non-zero. It points to an area
52 * in which longjmp() stuff is stored, as C callstack
53 * info there at least is thread specific this has to
54 * be per-thread. Otherwise a 'die' in a thread gives
55 * that thread the C stack of last thread to do an eval {}!
58 #define JMPENV_BOOTSTRAP \
60 Zero(&PL_start_env, 1, JMPENV); \
61 PL_start_env.je_ret = -1; \
62 PL_start_env.je_mustcatch = TRUE; \
63 PL_top_env = &PL_start_env; \
67 * PERL_FLEXIBLE_EXCEPTIONS
69 * All the flexible exceptions code has been removed.
70 * See the following threads for details:
72 * http://www.xray.mpe.mpg.de/mailing-lists/perl5-porters/2004-07/msg00378.html
74 * Joshua's original patches (which weren't applied) and discussion:
76 * http://www.xray.mpe.mpg.de/mailing-lists/perl5-porters/1998-02/msg01396.html
77 * http://www.xray.mpe.mpg.de/mailing-lists/perl5-porters/1998-02/msg01489.html
78 * http://www.xray.mpe.mpg.de/mailing-lists/perl5-porters/1998-02/msg01491.html
79 * http://www.xray.mpe.mpg.de/mailing-lists/perl5-porters/1998-02/msg01608.html
80 * http://www.xray.mpe.mpg.de/mailing-lists/perl5-porters/1998-02/msg02144.html
81 * http://www.xray.mpe.mpg.de/mailing-lists/perl5-porters/1998-02/msg02998.html
83 * Chip's reworked patch and discussion:
85 * http://www.xray.mpe.mpg.de/mailing-lists/perl5-porters/1999-03/msg00520.html
87 * The flaw in these patches (which went unnoticed at the time) was
88 * that they moved some code that could potentially die() out of the
89 * region protected by the setjmp()s. This caused exceptions within
90 * END blocks and such to not be handled by the correct setjmp().
92 * The original patches that introduces flexible exceptions were:
94 * http://public.activestate.com/cgi-bin/perlbrowse?patch=3386
95 * http://public.activestate.com/cgi-bin/perlbrowse?patch=5162
98 #define dJMPENV JMPENV cur_env
100 #define JMPENV_PUSH(v) \
102 DEBUG_l(Perl_deb(aTHX_ "Setting up jumplevel %p, was %p\n", \
103 &cur_env, PL_top_env)); \
104 cur_env.je_prev = PL_top_env; \
106 cur_env.je_ret = PerlProc_setjmp(cur_env.je_buf, SCOPE_SAVES_SIGNAL_MASK); \
108 PL_top_env = &cur_env; \
109 cur_env.je_mustcatch = FALSE; \
110 (v) = cur_env.je_ret; \
115 DEBUG_l(Perl_deb(aTHX_ "popping jumplevel was %p, now %p\n", \
116 PL_top_env, cur_env.je_prev)); \
117 PL_top_env = cur_env.je_prev; \
120 #define JMPENV_JUMP(v) \
123 if (PL_top_env->je_prev) \
124 PerlProc_longjmp(PL_top_env->je_buf, (v)); \
126 PerlProc_exit(STATUS_NATIVE_EXPORT); \
127 PerlIO_printf(PerlIO_stderr(), "panic: top_env\n"); \
131 #define CATCH_GET (PL_top_env->je_mustcatch)
132 #define CATCH_SET(v) (PL_top_env->je_mustcatch = (v))
138 char * cop_label; /* label for this construct */
140 char * cop_stashpv; /* package line was compiled in */
141 char * cop_file; /* file name the following line # is from */
143 HV * cop_stash; /* package line was compiled in */
144 GV * cop_filegv; /* file the following line # is from */
146 U32 cop_seq; /* parse sequence number */
147 I32 cop_arybase; /* array base this line was compiled with */
148 line_t cop_line; /* line # of this command */
149 SV * cop_warnings; /* lexical warnings bitmask */
150 SV * cop_io; /* lexical IO defaults */
153 #define Nullcop Null(COP*)
156 # define CopFILE(c) ((c)->cop_file)
157 # define CopFILEGV(c) (CopFILE(c) \
158 ? gv_fetchfile(CopFILE(c)) : Nullgv)
161 # define CopFILE_set(c,pv) ((c)->cop_file = savepv(pv))
163 # define CopFILE_set(c,pv) ((c)->cop_file = savesharedpv(pv))
166 # define CopFILESV(c) (CopFILE(c) \
167 ? GvSV(gv_fetchfile(CopFILE(c))) : Nullsv)
168 # define CopFILEAV(c) (CopFILE(c) \
169 ? GvAV(gv_fetchfile(CopFILE(c))) : Nullav)
170 # define CopSTASHPV(c) ((c)->cop_stashpv)
173 # define CopSTASHPV_set(c,pv) ((c)->cop_stashpv = ((pv) ? savepv(pv) : Nullch))
175 # define CopSTASHPV_set(c,pv) ((c)->cop_stashpv = savesharedpv(pv))
178 # define CopSTASH(c) (CopSTASHPV(c) \
179 ? gv_stashpv(CopSTASHPV(c),GV_ADD) : Nullhv)
180 # define CopSTASH_set(c,hv) CopSTASHPV_set(c, (hv) ? HvNAME(hv) : Nullch)
181 # define CopSTASH_eq(c,hv) ((hv) \
182 && (CopSTASHPV(c) == HvNAME(hv) \
183 || (CopSTASHPV(c) && HvNAME(hv) \
184 && strEQ(CopSTASHPV(c), HvNAME(hv)))))
186 # define CopSTASH_free(c) SAVECOPSTASH_FREE(c)
188 # define CopSTASH_free(c) PerlMemShared_free(CopSTASHPV(c))
192 # define CopFILE_free(c) SAVECOPFILE_FREE(c)
194 # define CopFILE_free(c) (PerlMemShared_free(CopFILE(c)),(CopFILE(c) = Nullch))
197 # define CopFILEGV(c) ((c)->cop_filegv)
198 # define CopFILEGV_set(c,gv) ((c)->cop_filegv = (GV*)SvREFCNT_inc(gv))
199 # define CopFILE_set(c,pv) CopFILEGV_set((c), gv_fetchfile(pv))
200 # define CopFILESV(c) (CopFILEGV(c) ? GvSV(CopFILEGV(c)) : Nullsv)
201 # define CopFILEAV(c) (CopFILEGV(c) ? GvAV(CopFILEGV(c)) : Nullav)
202 # define CopFILE(c) (CopFILESV(c) ? SvPVX(CopFILESV(c)) : Nullch)
203 # define CopSTASH(c) ((c)->cop_stash)
204 # define CopSTASH_set(c,hv) ((c)->cop_stash = (hv))
205 # define CopSTASHPV(c) (CopSTASH(c) ? HvNAME(CopSTASH(c)) : Nullch)
206 /* cop_stash is not refcounted */
207 # define CopSTASHPV_set(c,pv) CopSTASH_set((c), gv_stashpv(pv,GV_ADD))
208 # define CopSTASH_eq(c,hv) (CopSTASH(c) == (hv))
209 # define CopSTASH_free(c)
210 # define CopFILE_free(c) (SvREFCNT_dec(CopFILEGV(c)),(CopFILEGV(c) = Nullgv))
212 #endif /* USE_ITHREADS */
214 #define CopSTASH_ne(c,hv) (!CopSTASH_eq(c,hv))
215 #define CopLINE(c) ((c)->cop_line)
216 #define CopLINE_inc(c) (++CopLINE(c))
217 #define CopLINE_dec(c) (--CopLINE(c))
218 #define CopLINE_set(c,l) (CopLINE(c) = (l))
220 /* OutCopFILE() is CopFILE for output (caller, die, warn, etc.) */
221 #ifdef MACOS_TRADITIONAL
222 # define OutCopFILE(c) MacPerl_MPWFileName(CopFILE(c))
224 # define OutCopFILE(c) CopFILE(c)
228 * Here we have some enormously heavy (or at least ponderous) wizardry.
231 /* subroutine context */
240 U8 lval; /* XXX merge lval and hasargs? */
242 OP * retop; /* op to execute on exit from sub */
245 /* base for the next two macros. Don't use directly.
246 * Note that the refcnt of the cv is incremented twice; The CX one is
247 * decremented by LEAVESUB, the other by LEAVE. */
249 #define PUSHSUB_BASE(cx) \
250 cx->blk_sub.cv = cv; \
251 cx->blk_sub.olddepth = CvDEPTH(cv); \
252 cx->blk_sub.hasargs = hasargs; \
253 cx->blk_sub.retop = Nullop; \
254 if (!CvDEPTH(cv)) { \
255 (void)SvREFCNT_inc(cv); \
256 (void)SvREFCNT_inc(cv); \
261 #define PUSHSUB(cx) \
263 cx->blk_sub.lval = PL_op->op_private & \
264 (OPpLVAL_INTRO|OPpENTERSUB_INARGS);
266 /* variant for use by OP_DBSTATE, where op_private holds hint bits */
267 #define PUSHSUB_DB(cx) \
269 cx->blk_sub.lval = 0;
272 #define PUSHFORMAT(cx) \
273 cx->blk_sub.cv = cv; \
274 cx->blk_sub.gv = gv; \
275 cx->blk_sub.retop = Nullop; \
276 cx->blk_sub.hasargs = 0; \
277 cx->blk_sub.dfoutgv = PL_defoutgv; \
278 (void)SvREFCNT_inc(cx->blk_sub.dfoutgv)
280 #define POP_SAVEARRAY() \
282 SvREFCNT_dec(GvAV(PL_defgv)); \
283 GvAV(PL_defgv) = cx->blk_sub.savearray; \
286 /* junk in @_ spells trouble when cloning CVs and in pp_caller(), so don't
287 * leave any (a fast av_clear(ary), basically) */
288 #define CLEAR_ARGARRAY(ary) \
290 AvMAX(ary) += AvARRAY(ary) - AvALLOC(ary); \
291 SvPV_set(ary, (char*)AvALLOC(ary)); \
295 #define POPSUB(cx,sv) \
297 if (cx->blk_sub.hasargs) { \
299 /* abandon @_ if it got reified */ \
300 if (AvREAL(cx->blk_sub.argarray)) { \
301 SSize_t fill = AvFILLp(cx->blk_sub.argarray); \
302 SvREFCNT_dec(cx->blk_sub.argarray); \
303 cx->blk_sub.argarray = newAV(); \
304 av_extend(cx->blk_sub.argarray, fill); \
305 AvREIFY_only(cx->blk_sub.argarray); \
306 CX_CURPAD_SV(cx->blk_sub, 0) = (SV*)cx->blk_sub.argarray; \
309 CLEAR_ARGARRAY(cx->blk_sub.argarray); \
312 sv = (SV*)cx->blk_sub.cv; \
313 if (sv && (CvDEPTH((CV*)sv) = cx->blk_sub.olddepth)) \
317 #define LEAVESUB(sv) \
323 #define POPFORMAT(cx) \
324 setdefout(cx->blk_sub.dfoutgv); \
325 SvREFCNT_dec(cx->blk_sub.dfoutgv);
335 OP * retop; /* op to execute on exit from eval */
336 JMPENV * cur_top_env; /* value of PL_top_env when eval CX created */
339 #define PUSHEVAL(cx,n,fgv) \
341 cx->blk_eval.old_in_eval = PL_in_eval; \
342 cx->blk_eval.old_op_type = PL_op->op_type; \
343 cx->blk_eval.old_namesv = (n ? newSVpv(n,0) : Nullsv); \
344 cx->blk_eval.old_eval_root = PL_eval_root; \
345 cx->blk_eval.cur_text = PL_linestr; \
346 cx->blk_eval.cv = Nullcv; /* set by doeval(), as applicable */ \
347 cx->blk_eval.retop = Nullop; \
348 cx->blk_eval.cur_top_env = PL_top_env; \
351 #define POPEVAL(cx) \
353 PL_in_eval = cx->blk_eval.old_in_eval; \
354 optype = cx->blk_eval.old_op_type; \
355 PL_eval_root = cx->blk_eval.old_eval_root; \
356 if (cx->blk_eval.old_namesv) \
357 sv_2mortal(cx->blk_eval.old_namesv); \
381 # define CxITERVAR(c) \
382 ((c)->blk_loop.iterdata \
384 ? &CX_CURPAD_SV( (c)->blk_loop, \
385 INT2PTR(PADOFFSET, (c)->blk_loop.iterdata)) \
386 : &GvSV((GV*)(c)->blk_loop.iterdata)) \
388 # define CX_ITERDATA_SET(cx,idata) \
389 CX_CURPAD_SAVE(cx->blk_loop); \
390 if ((cx->blk_loop.iterdata = (idata))) \
391 cx->blk_loop.itersave = SvREFCNT_inc(*CxITERVAR(cx)); \
393 cx->blk_loop.itersave = Nullsv;
395 # define CxITERVAR(c) ((c)->blk_loop.itervar)
396 # define CX_ITERDATA_SET(cx,ivar) \
397 if ((cx->blk_loop.itervar = (SV**)(ivar))) \
398 cx->blk_loop.itersave = SvREFCNT_inc(*CxITERVAR(cx)); \
400 cx->blk_loop.itersave = Nullsv;
403 #define PUSHLOOP(cx, dat, s) \
404 cx->blk_loop.label = PL_curcop->cop_label; \
405 cx->blk_loop.resetsp = s - PL_stack_base; \
406 cx->blk_loop.redo_op = cLOOP->op_redoop; \
407 cx->blk_loop.next_op = cLOOP->op_nextop; \
408 cx->blk_loop.last_op = cLOOP->op_lastop; \
409 cx->blk_loop.iterlval = Nullsv; \
410 cx->blk_loop.iterary = Nullav; \
411 cx->blk_loop.iterix = -1; \
412 CX_ITERDATA_SET(cx,dat);
414 #define POPLOOP(cx) \
415 SvREFCNT_dec(cx->blk_loop.iterlval); \
416 if (CxITERVAR(cx)) { \
417 SV **s_v_p = CxITERVAR(cx); \
418 sv_2mortal(*s_v_p); \
419 *s_v_p = cx->blk_loop.itersave; \
421 if (cx->blk_loop.iterary && cx->blk_loop.iterary != PL_curstack)\
422 SvREFCNT_dec(cx->blk_loop.iterary);
424 /* context common to subroutines, evals and loops */
426 I32 blku_oldsp; /* stack pointer to copy stuff down to */
427 COP * blku_oldcop; /* old curcop pointer */
428 I32 blku_oldmarksp; /* mark stack index */
429 I32 blku_oldscopesp; /* scope stack index */
430 PMOP * blku_oldpm; /* values of pattern match vars */
431 U8 blku_gimme; /* is this block running in list context? */
434 struct block_sub blku_sub;
435 struct block_eval blku_eval;
436 struct block_loop blku_loop;
439 #define blk_oldsp cx_u.cx_blk.blku_oldsp
440 #define blk_oldcop cx_u.cx_blk.blku_oldcop
441 #define blk_oldmarksp cx_u.cx_blk.blku_oldmarksp
442 #define blk_oldscopesp cx_u.cx_blk.blku_oldscopesp
443 #define blk_oldpm cx_u.cx_blk.blku_oldpm
444 #define blk_gimme cx_u.cx_blk.blku_gimme
445 #define blk_sub cx_u.cx_blk.blk_u.blku_sub
446 #define blk_eval cx_u.cx_blk.blk_u.blku_eval
447 #define blk_loop cx_u.cx_blk.blk_u.blku_loop
450 #define PUSHBLOCK(cx,t,sp) CXINC, cx = &cxstack[cxstack_ix], \
452 cx->blk_oldsp = sp - PL_stack_base, \
453 cx->blk_oldcop = PL_curcop, \
454 cx->blk_oldmarksp = PL_markstack_ptr - PL_markstack, \
455 cx->blk_oldscopesp = PL_scopestack_ix, \
456 cx->blk_oldpm = PL_curpm, \
457 cx->blk_gimme = (U8)gimme; \
458 DEBUG_l( PerlIO_printf(Perl_debug_log, "Entering block %ld, type %s\n", \
459 (long)cxstack_ix, PL_block_type[CxTYPE(cx)]); )
461 /* Exit a block (RETURN and LAST). */
462 #define POPBLOCK(cx,pm) cx = &cxstack[cxstack_ix--], \
463 newsp = PL_stack_base + cx->blk_oldsp, \
464 PL_curcop = cx->blk_oldcop, \
465 PL_markstack_ptr = PL_markstack + cx->blk_oldmarksp, \
466 PL_scopestack_ix = cx->blk_oldscopesp, \
467 pm = cx->blk_oldpm, \
468 gimme = cx->blk_gimme; \
469 DEBUG_SCOPE("POPBLOCK"); \
470 DEBUG_l( PerlIO_printf(Perl_debug_log, "Leaving block %ld, type %s\n", \
471 (long)cxstack_ix+1,PL_block_type[CxTYPE(cx)]); )
473 /* Continue a block elsewhere (NEXT and REDO). */
474 #define TOPBLOCK(cx) cx = &cxstack[cxstack_ix], \
475 PL_stack_sp = PL_stack_base + cx->blk_oldsp, \
476 PL_markstack_ptr = PL_markstack + cx->blk_oldmarksp, \
477 PL_scopestack_ix = cx->blk_oldscopesp, \
478 PL_curpm = cx->blk_oldpm; \
479 DEBUG_SCOPE("TOPBLOCK");
481 /* substitution context */
498 #define sb_iters cx_u.cx_subst.sbu_iters
499 #define sb_maxiters cx_u.cx_subst.sbu_maxiters
500 #define sb_rflags cx_u.cx_subst.sbu_rflags
501 #define sb_oldsave cx_u.cx_subst.sbu_oldsave
502 #define sb_once cx_u.cx_subst.sbu_once
503 #define sb_rxtainted cx_u.cx_subst.sbu_rxtainted
504 #define sb_orig cx_u.cx_subst.sbu_orig
505 #define sb_dstr cx_u.cx_subst.sbu_dstr
506 #define sb_targ cx_u.cx_subst.sbu_targ
507 #define sb_s cx_u.cx_subst.sbu_s
508 #define sb_m cx_u.cx_subst.sbu_m
509 #define sb_strend cx_u.cx_subst.sbu_strend
510 #define sb_rxres cx_u.cx_subst.sbu_rxres
511 #define sb_rx cx_u.cx_subst.sbu_rx
513 #define PUSHSUBST(cx) CXINC, cx = &cxstack[cxstack_ix], \
514 cx->sb_iters = iters, \
515 cx->sb_maxiters = maxiters, \
516 cx->sb_rflags = r_flags, \
517 cx->sb_oldsave = oldsave, \
518 cx->sb_once = once, \
519 cx->sb_rxtainted = rxtainted, \
520 cx->sb_orig = orig, \
521 cx->sb_dstr = dstr, \
522 cx->sb_targ = targ, \
525 cx->sb_strend = strend, \
526 cx->sb_rxres = Null(void*), \
528 cx->cx_type = CXt_SUBST; \
529 rxres_save(&cx->sb_rxres, rx)
531 #define POPSUBST(cx) cx = &cxstack[cxstack_ix--]; \
532 rxres_free(&cx->sb_rxres)
535 U32 cx_type; /* what kind of context this is */
538 struct subst cx_subst;
542 #define CXTYPEMASK 0xff
551 /* private flags for CXt_EVAL */
552 #define CXp_REAL 0x00000100 /* truly eval'', not a lookalike */
553 #define CXp_TRYBLOCK 0x00000200 /* eval{}, not eval'' or similar */
556 /* private flags for CXt_LOOP */
557 # define CXp_PADVAR 0x00000100 /* itervar lives on pad, iterdata
558 has pad offset; if not set,
559 iterdata holds GV* */
560 # define CxPADLOOP(c) (((c)->cx_type & (CXt_LOOP|CXp_PADVAR)) \
561 == (CXt_LOOP|CXp_PADVAR))
564 #define CxTYPE(c) ((c)->cx_type & CXTYPEMASK)
565 #define CxREALEVAL(c) (((c)->cx_type & (CXt_EVAL|CXp_REAL)) \
566 == (CXt_EVAL|CXp_REAL))
567 #define CxTRYBLOCK(c) (((c)->cx_type & (CXt_EVAL|CXp_TRYBLOCK)) \
568 == (CXt_EVAL|CXp_TRYBLOCK))
570 #define CXINC (cxstack_ix < cxstack_max ? ++cxstack_ix : (cxstack_ix = cxinc()))
573 =head1 "Gimme" Values
577 =for apidoc AmU||G_SCALAR
578 Used to indicate scalar context. See C<GIMME_V>, C<GIMME>, and
581 =for apidoc AmU||G_ARRAY
582 Used to indicate list context. See C<GIMME_V>, C<GIMME> and
585 =for apidoc AmU||G_VOID
586 Used to indicate void context. See C<GIMME_V> and L<perlcall>.
588 =for apidoc AmU||G_DISCARD
589 Indicates that arguments returned from a callback should be discarded. See
592 =for apidoc AmU||G_EVAL
594 Used to force a Perl C<eval> wrapper around a callback. See
597 =for apidoc AmU||G_NOARGS
599 Indicates that no arguments are being sent to a callback. See
607 #define G_VOID 128 /* skip this bit when adding flags below */
609 /* extra flags for Perl_call_* routines */
610 #define G_DISCARD 2 /* Call FREETMPS. */
611 #define G_EVAL 4 /* Assume eval {} around subroutine call. */
612 #define G_NOARGS 8 /* Don't construct a @_ array. */
613 #define G_KEEPERR 16 /* Append errors to $@, don't overwrite it */
614 #define G_NODEBUG 32 /* Disable debugging at toplevel. */
615 #define G_METHOD 64 /* Calling method. */
617 /* flag bits for PL_in_eval */
618 #define EVAL_NULL 0 /* not in an eval */
619 #define EVAL_INEVAL 1 /* some enclosing scope is an eval */
620 #define EVAL_WARNONLY 2 /* used by yywarn() when calling yyerror() */
621 #define EVAL_KEEPERR 4 /* set by Perl_call_sv if G_KEEPERR */
622 #define EVAL_INREQUIRE 8 /* The code is being required. */
624 /* Support for switching (stack and block) contexts.
625 * This ensures magic doesn't invalidate local stack and cx pointers.
628 #define PERLSI_UNKNOWN -1
629 #define PERLSI_UNDEF 0
630 #define PERLSI_MAIN 1
631 #define PERLSI_MAGIC 2
632 #define PERLSI_SORT 3
633 #define PERLSI_SIGNAL 4
634 #define PERLSI_OVERLOAD 5
635 #define PERLSI_DESTROY 6
636 #define PERLSI_WARNHOOK 7
637 #define PERLSI_DIEHOOK 8
638 #define PERLSI_REQUIRE 9
641 AV * si_stack; /* stack for current runlevel */
642 PERL_CONTEXT * si_cxstack; /* context stack for runlevel */
643 I32 si_cxix; /* current context index */
644 I32 si_cxmax; /* maximum allocated index */
645 I32 si_type; /* type of runlevel */
646 struct stackinfo * si_prev;
647 struct stackinfo * si_next;
648 I32 si_markoff; /* offset where markstack begins for us.
649 * currently used only with DEBUGGING,
650 * but not #ifdef-ed for bincompat */
653 typedef struct stackinfo PERL_SI;
655 #define cxstack (PL_curstackinfo->si_cxstack)
656 #define cxstack_ix (PL_curstackinfo->si_cxix)
657 #define cxstack_max (PL_curstackinfo->si_cxmax)
660 # define SET_MARK_OFFSET \
661 PL_curstackinfo->si_markoff = PL_markstack_ptr - PL_markstack
663 # define SET_MARK_OFFSET NOOP
666 #define PUSHSTACKi(type) \
668 PERL_SI *next = PL_curstackinfo->si_next; \
670 next = new_stackinfo(32, 2048/sizeof(PERL_CONTEXT) - 1); \
671 next->si_prev = PL_curstackinfo; \
672 PL_curstackinfo->si_next = next; \
674 next->si_type = type; \
675 next->si_cxix = -1; \
676 AvFILLp(next->si_stack) = 0; \
677 SWITCHSTACK(PL_curstack,next->si_stack); \
678 PL_curstackinfo = next; \
682 #define PUSHSTACK PUSHSTACKi(PERLSI_UNKNOWN)
684 /* POPSTACK works with PL_stack_sp, so it may need to be bracketed by
685 * PUTBACK/SPAGAIN to flush/refresh any local SP that may be active */
689 PERL_SI *prev = PL_curstackinfo->si_prev; \
691 PerlIO_printf(Perl_error_log, "panic: POPSTACK\n"); \
694 SWITCHSTACK(PL_curstack,prev->si_stack); \
695 /* don't free prev here, free them all at the END{} */ \
696 PL_curstackinfo = prev; \
699 #define POPSTACK_TO(s) \
701 while (PL_curstack != s) { \
707 #define IN_PERL_COMPILETIME (PL_curcop == &PL_compiling)
708 #define IN_PERL_RUNTIME (PL_curcop != &PL_compiling)