3 * Copyright (C) 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
4 * 2000, 2001, 2002, 2003, 2004, 2005, 2006 by Larry Wall and others
6 * You may distribute under the terms of either the GNU General Public
7 * License or the Artistic License, as specified in the README file.
9 * Control ops (cops) are one of the three ops OP_NEXTSTATE, OP_DBSTATE,
10 * and OP_SETSTATE that (loosely speaking) are separate statements.
11 * They hold information important for lexical state and error reporting.
12 * At run time, PL_curcop is set to point to the most recently executed cop,
13 * and thus can be used to determine our current state.
16 /* A jmpenv packages the state required to perform a proper non-local jump.
17 * Note that there is a start_env initialized when perl starts, and top_env
18 * points to this initially, so top_env should always be non-null.
20 * Existence of a non-null top_env->je_prev implies it is valid to call
21 * longjmp() at that runlevel (we make sure start_env.je_prev is always
22 * null to ensure this).
24 * je_mustcatch, when set at any runlevel to TRUE, means eval ops must
25 * establish a local jmpenv to handle exception traps. Care must be taken
26 * to restore the previous value of je_mustcatch before exiting the
27 * stack frame iff JMPENV_PUSH was not called in that stack frame.
32 struct jmpenv * je_prev;
33 Sigjmp_buf je_buf; /* only for use if !je_throw */
34 int je_ret; /* last exception thrown */
35 bool je_mustcatch; /* need to call longjmp()? */
38 typedef struct jmpenv JMPENV;
41 #define OP_REG_TO_MEM PL_opsave = op
42 #define OP_MEM_TO_REG op = PL_opsave
44 #define OP_REG_TO_MEM NOOP
45 #define OP_MEM_TO_REG NOOP
49 * How to build the first jmpenv.
51 * top_env needs to be non-zero. It points to an area
52 * in which longjmp() stuff is stored, as C callstack
53 * info there at least is thread specific this has to
54 * be per-thread. Otherwise a 'die' in a thread gives
55 * that thread the C stack of last thread to do an eval {}!
58 #define JMPENV_BOOTSTRAP \
60 Zero(&PL_start_env, 1, JMPENV); \
61 PL_start_env.je_ret = -1; \
62 PL_start_env.je_mustcatch = TRUE; \
63 PL_top_env = &PL_start_env; \
67 * PERL_FLEXIBLE_EXCEPTIONS
69 * All the flexible exceptions code has been removed.
70 * See the following threads for details:
72 * http://www.xray.mpe.mpg.de/mailing-lists/perl5-porters/2004-07/msg00378.html
74 * Joshua's original patches (which weren't applied) and discussion:
76 * http://www.xray.mpe.mpg.de/mailing-lists/perl5-porters/1998-02/msg01396.html
77 * http://www.xray.mpe.mpg.de/mailing-lists/perl5-porters/1998-02/msg01489.html
78 * http://www.xray.mpe.mpg.de/mailing-lists/perl5-porters/1998-02/msg01491.html
79 * http://www.xray.mpe.mpg.de/mailing-lists/perl5-porters/1998-02/msg01608.html
80 * http://www.xray.mpe.mpg.de/mailing-lists/perl5-porters/1998-02/msg02144.html
81 * http://www.xray.mpe.mpg.de/mailing-lists/perl5-porters/1998-02/msg02998.html
83 * Chip's reworked patch and discussion:
85 * http://www.xray.mpe.mpg.de/mailing-lists/perl5-porters/1999-03/msg00520.html
87 * The flaw in these patches (which went unnoticed at the time) was
88 * that they moved some code that could potentially die() out of the
89 * region protected by the setjmp()s. This caused exceptions within
90 * END blocks and such to not be handled by the correct setjmp().
92 * The original patches that introduces flexible exceptions were:
94 * http://public.activestate.com/cgi-bin/perlbrowse?patch=3386
95 * http://public.activestate.com/cgi-bin/perlbrowse?patch=5162
98 #define dJMPENV JMPENV cur_env
100 #define JMPENV_PUSH(v) \
102 DEBUG_l(Perl_deb(aTHX_ "Setting up jumplevel %p, was %p\n", \
103 (void*)&cur_env, (void*)PL_top_env)); \
104 cur_env.je_prev = PL_top_env; \
106 cur_env.je_ret = PerlProc_setjmp(cur_env.je_buf, SCOPE_SAVES_SIGNAL_MASK); \
108 PL_top_env = &cur_env; \
109 cur_env.je_mustcatch = FALSE; \
110 (v) = cur_env.je_ret; \
115 DEBUG_l(Perl_deb(aTHX_ "popping jumplevel was %p, now %p\n", \
116 (void*)PL_top_env, (void*)cur_env.je_prev)); \
117 PL_top_env = cur_env.je_prev; \
120 #define JMPENV_JUMP(v) \
123 if (PL_top_env->je_prev) \
124 PerlProc_longjmp(PL_top_env->je_buf, (v)); \
126 PerlProc_exit(STATUS_EXIT); \
127 PerlIO_printf(PerlIO_stderr(), "panic: top_env\n"); \
131 #define CATCH_GET (PL_top_env->je_mustcatch)
132 #define CATCH_SET(v) (PL_top_env->je_mustcatch = (v))
138 char * cop_label; /* label for this construct */
140 char * cop_stashpv; /* package line was compiled in */
141 char * cop_file; /* file name the following line # is from */
143 HV * cop_stash; /* package line was compiled in */
144 GV * cop_filegv; /* file the following line # is from */
146 U32 cop_hints; /* hints bits from pragmata */
147 U32 cop_seq; /* parse sequence number */
148 line_t cop_line; /* line # of this command */
149 /* Beware. mg.c and warnings.pl assume the type of this is STRLEN *: */
150 STRLEN * cop_warnings; /* lexical warnings bitmask */
151 /* compile time state of %^H. See the comment in op.c for how this is
152 used to recreate a hash to return from caller. */
153 struct refcounted_he * cop_hints_hash;
157 # define CopFILE(c) ((c)->cop_file)
158 # define CopFILEGV(c) (CopFILE(c) \
159 ? gv_fetchfile(CopFILE(c)) : NULL)
162 # define CopFILE_set(c,pv) ((c)->cop_file = savepv(pv))
164 # define CopFILE_set(c,pv) ((c)->cop_file = savesharedpv(pv))
167 # define CopFILESV(c) (CopFILE(c) \
168 ? GvSV(gv_fetchfile(CopFILE(c))) : NULL)
169 # define CopFILEAV(c) (CopFILE(c) \
170 ? GvAV(gv_fetchfile(CopFILE(c))) : NULL)
172 # define CopFILEAVx(c) (assert(CopFILE(c)), \
173 GvAV(gv_fetchfile(CopFILE(c))))
175 # define CopFILEAVx(c) (GvAV(gv_fetchfile(CopFILE(c))))
177 # define CopSTASHPV(c) ((c)->cop_stashpv)
180 # define CopSTASHPV_set(c,pv) ((c)->cop_stashpv = ((pv) ? savepv(pv) : NULL))
182 # define CopSTASHPV_set(c,pv) ((c)->cop_stashpv = savesharedpv(pv))
185 # define CopSTASH(c) (CopSTASHPV(c) \
186 ? gv_stashpv(CopSTASHPV(c),GV_ADD) : NULL)
187 # define CopSTASH_set(c,hv) CopSTASHPV_set(c, (hv) ? HvNAME_get(hv) : NULL)
188 # define CopSTASH_eq(c,hv) ((hv) && stashpv_hvname_match(c,hv))
190 # define CopSTASH_free(c) SAVECOPSTASH_FREE(c)
191 # define CopFILE_free(c) SAVECOPFILE_FREE(c)
193 # define CopSTASH_free(c) PerlMemShared_free(CopSTASHPV(c))
194 # define CopFILE_free(c) (PerlMemShared_free(CopFILE(c)),(CopFILE(c) = NULL))
197 # define CopFILEGV(c) ((c)->cop_filegv)
198 # define CopFILEGV_set(c,gv) ((c)->cop_filegv = (GV*)SvREFCNT_inc(gv))
199 # define CopFILE_set(c,pv) CopFILEGV_set((c), gv_fetchfile(pv))
200 # define CopFILESV(c) (CopFILEGV(c) ? GvSV(CopFILEGV(c)) : NULL)
201 # define CopFILEAV(c) (CopFILEGV(c) ? GvAV(CopFILEGV(c)) : NULL)
203 # define CopFILEAVx(c) (assert(CopFILEGV(c)), GvAV(CopFILEGV(c)))
205 # define CopFILEAVx(c) (GvAV(CopFILEGV(c)))
207 # define CopFILE(c) (CopFILESV(c) ? SvPVX(CopFILESV(c)) : NULL)
208 # define CopSTASH(c) ((c)->cop_stash)
209 # define CopSTASH_set(c,hv) ((c)->cop_stash = (hv))
210 # define CopSTASHPV(c) (CopSTASH(c) ? HvNAME_get(CopSTASH(c)) : NULL)
211 /* cop_stash is not refcounted */
212 # define CopSTASHPV_set(c,pv) CopSTASH_set((c), gv_stashpv(pv,GV_ADD))
213 # define CopSTASH_eq(c,hv) (CopSTASH(c) == (hv))
214 # define CopSTASH_free(c)
215 # define CopFILE_free(c) (SvREFCNT_dec(CopFILEGV(c)),(CopFILEGV(c) = NULL))
217 #endif /* USE_ITHREADS */
219 #define CopSTASH_ne(c,hv) (!CopSTASH_eq(c,hv))
220 #define CopLINE(c) ((c)->cop_line)
221 #define CopLINE_inc(c) (++CopLINE(c))
222 #define CopLINE_dec(c) (--CopLINE(c))
223 #define CopLINE_set(c,l) (CopLINE(c) = (l))
225 /* OutCopFILE() is CopFILE for output (caller, die, warn, etc.) */
226 #ifdef MACOS_TRADITIONAL
227 # define OutCopFILE(c) MacPerl_MPWFileName(CopFILE(c))
229 # define OutCopFILE(c) CopFILE(c)
232 /* If $[ is non-zero, it's stored in cop_hints under the key "$[", and
233 HINT_ARYBASE is set to indicate this.
234 Setting it is ineficient due to the need to create 2 mortal SVs, but as
235 using $[ is highly discouraged, no sane Perl code will be using it. */
236 #define CopARYBASE_get(c) \
237 ((CopHINTS_get(c) & HINT_ARYBASE) \
238 ? SvIV(Perl_refcounted_he_fetch(aTHX_ (c)->cop_hints_hash, 0, \
241 #define CopARYBASE_set(c, b) STMT_START { \
242 if (b || ((c)->cop_hints & HINT_ARYBASE)) { \
243 (c)->cop_hints |= HINT_ARYBASE; \
244 if ((c) == &PL_compiling) \
245 PL_hints |= HINT_LOCALIZE_HH | HINT_ARYBASE; \
246 (c)->cop_hints_hash \
247 = Perl_refcounted_he_new(aTHX_ (c)->cop_hints_hash, \
248 sv_2mortal(newSVpvs("$[")), \
249 sv_2mortal(newSViv(b))); \
253 /* FIXME NATIVE_HINTS if this is changed from op_private (see perl.h) */
254 #define CopHINTS_get(c) ((c)->cop_hints + 0)
255 #define CopHINTS_set(c, h) STMT_START { \
256 (c)->cop_hints = (h); \
260 * Here we have some enormously heavy (or at least ponderous) wizardry.
263 /* subroutine context */
271 /* These are merged to to get struct context down to 64 bytes on ILP32. */
274 OP * retop; /* op to execute on exit from sub */
277 #define CX_SUB_HASARGS_SET(cx, v) ((cx)->blk_sub.hasargs_lval = \
278 ((cx)->blk_sub.hasargs_lval & 0xFE) | ((v) ? 1 : 0))
279 #define CX_SUB_HASARGS_GET(cx) ((cx)->blk_sub.hasargs_lval & 0x01)
281 #define CX_SUB_LVAL_SET(cx, v) ((cx)->blk_sub.hasargs_lval = \
282 (((cx)->blk_sub.hasargs_lval & 0x01) | ((v) & (OPpLVAL_INTRO|OPpENTERSUB_INARGS))))
283 #define CX_SUB_LVAL(cx) ((cx)->blk_sub.hasargs_lval & 0xFE)
284 #define CX_SUB_LVAL_INARGS(cx) ((cx)->blk_sub.hasargs_lval & \
287 /* base for the next two macros. Don't use directly.
288 * Note that the refcnt of the cv is incremented twice; The CX one is
289 * decremented by LEAVESUB, the other by LEAVE. */
291 #define PUSHSUB_BASE(cx) \
292 cx->blk_sub.cv = cv; \
293 cx->blk_sub.olddepth = CvDEPTH(cv); \
294 CX_SUB_HASARGS_SET(cx, hasargs); \
295 cx->blk_sub.retop = NULL; \
296 if (!CvDEPTH(cv)) { \
297 SvREFCNT_inc_simple_void_NN(cv); \
298 SvREFCNT_inc_simple_void_NN(cv); \
303 #define PUSHSUB(cx) \
305 CX_SUB_LVAL_SET(cx, PL_op->op_private)
307 /* variant for use by OP_DBSTATE, where op_private holds hint bits */
308 #define PUSHSUB_DB(cx) \
310 CX_SUB_LVAL_SET(cx, 0)
313 #define PUSHFORMAT(cx) \
314 cx->blk_sub.cv = cv; \
315 cx->blk_sub.gv = gv; \
316 cx->blk_sub.retop = NULL; \
317 CX_SUB_HASARGS_SET(cx, 0); \
318 cx->blk_sub.dfoutgv = PL_defoutgv; \
319 SvREFCNT_inc_void(cx->blk_sub.dfoutgv)
321 #define POP_SAVEARRAY() \
323 SvREFCNT_dec(GvAV(PL_defgv)); \
324 GvAV(PL_defgv) = cx->blk_sub.savearray; \
327 /* junk in @_ spells trouble when cloning CVs and in pp_caller(), so don't
328 * leave any (a fast av_clear(ary), basically) */
329 #define CLEAR_ARGARRAY(ary) \
331 AvMAX(ary) += AvARRAY(ary) - AvALLOC(ary); \
332 SvPV_set(ary, (char*)AvALLOC(ary)); \
336 #define POPSUB(cx,sv) \
338 if (CX_SUB_HASARGS_GET(cx)) { \
340 /* abandon @_ if it got reified */ \
341 if (AvREAL(cx->blk_sub.argarray)) { \
342 const SSize_t fill = AvFILLp(cx->blk_sub.argarray); \
343 SvREFCNT_dec(cx->blk_sub.argarray); \
344 cx->blk_sub.argarray = newAV(); \
345 av_extend(cx->blk_sub.argarray, fill); \
346 AvREIFY_only(cx->blk_sub.argarray); \
347 CX_CURPAD_SV(cx->blk_sub, 0) = (SV*)cx->blk_sub.argarray; \
350 CLEAR_ARGARRAY(cx->blk_sub.argarray); \
353 sv = (SV*)cx->blk_sub.cv; \
354 if (sv && (CvDEPTH((CV*)sv) = cx->blk_sub.olddepth)) \
358 #define LEAVESUB(sv) \
364 #define POPFORMAT(cx) \
365 setdefout(cx->blk_sub.dfoutgv); \
366 SvREFCNT_dec(cx->blk_sub.dfoutgv);
376 OP * retop; /* op to execute on exit from eval */
377 JMPENV * cur_top_env; /* value of PL_top_env when eval CX created */
380 #define PUSHEVAL(cx,n,fgv) \
382 cx->blk_eval.old_in_eval = PL_in_eval; \
383 cx->blk_eval.old_op_type = PL_op->op_type; \
384 cx->blk_eval.old_namesv = (n ? newSVpv(n,0) : NULL); \
385 cx->blk_eval.old_eval_root = PL_eval_root; \
386 cx->blk_eval.cur_text = PL_linestr; \
387 cx->blk_eval.cv = NULL; /* set by doeval(), as applicable */ \
388 cx->blk_eval.retop = NULL; \
389 cx->blk_eval.cur_top_env = PL_top_env; \
392 #define POPEVAL(cx) \
394 PL_in_eval = cx->blk_eval.old_in_eval; \
395 optype = cx->blk_eval.old_op_type; \
396 PL_eval_root = cx->blk_eval.old_eval_root; \
397 if (cx->blk_eval.old_namesv) \
398 sv_2mortal(cx->blk_eval.old_namesv); \
422 # define CxITERVAR(c) \
423 ((c)->blk_loop.iterdata \
425 ? &CX_CURPAD_SV( (c)->blk_loop, \
426 INT2PTR(PADOFFSET, (c)->blk_loop.iterdata)) \
427 : &GvSV((GV*)(c)->blk_loop.iterdata)) \
429 # define CX_ITERDATA_SET(cx,idata) \
430 CX_CURPAD_SAVE(cx->blk_loop); \
431 if ((cx->blk_loop.iterdata = (idata))) \
432 cx->blk_loop.itersave = SvREFCNT_inc(*CxITERVAR(cx)); \
434 cx->blk_loop.itersave = NULL;
436 # define CxITERVAR(c) ((c)->blk_loop.itervar)
437 # define CX_ITERDATA_SET(cx,ivar) \
438 if ((cx->blk_loop.itervar = (SV**)(ivar))) \
439 cx->blk_loop.itersave = SvREFCNT_inc(*CxITERVAR(cx)); \
441 cx->blk_loop.itersave = NULL;
444 #define PUSHLOOP(cx, dat, s) \
445 cx->blk_loop.label = PL_curcop->cop_label; \
446 cx->blk_loop.resetsp = s - PL_stack_base; \
447 cx->blk_loop.redo_op = cLOOP->op_redoop; \
448 cx->blk_loop.next_op = cLOOP->op_nextop; \
449 cx->blk_loop.last_op = cLOOP->op_lastop; \
450 cx->blk_loop.iterlval = NULL; \
451 cx->blk_loop.iterary = NULL; \
452 cx->blk_loop.iterix = -1; \
453 CX_ITERDATA_SET(cx,dat);
455 #define POPLOOP(cx) \
456 SvREFCNT_dec(cx->blk_loop.iterlval); \
457 if (CxITERVAR(cx)) { \
458 if (SvPADMY(cx->blk_loop.itersave)) { \
459 SV ** const s_v_p = CxITERVAR(cx); \
460 sv_2mortal(*s_v_p); \
461 *s_v_p = cx->blk_loop.itersave; \
464 SvREFCNT_dec(cx->blk_loop.itersave); \
467 if (cx->blk_loop.iterary && cx->blk_loop.iterary != PL_curstack)\
468 SvREFCNT_dec(cx->blk_loop.iterary);
470 /* given/when context */
471 struct block_givwhen {
475 #define PUSHGIVEN(cx) \
476 cx->blk_givwhen.leave_op = cLOGOP->op_other;
478 #define PUSHWHEN PUSHGIVEN
480 /* context common to subroutines, evals and loops */
482 U16 blku_type; /* what kind of context this is */
483 U8 blku_gimme; /* is this block running in list context? */
484 I32 blku_oldsp; /* stack pointer to copy stuff down to */
485 COP * blku_oldcop; /* old curcop pointer */
486 I32 blku_oldmarksp; /* mark stack index */
487 I32 blku_oldscopesp; /* scope stack index */
488 PMOP * blku_oldpm; /* values of pattern match vars */
491 struct block_sub blku_sub;
492 struct block_eval blku_eval;
493 struct block_loop blku_loop;
494 struct block_givwhen blku_givwhen;
497 #define blk_oldsp cx_u.cx_blk.blku_oldsp
498 #define blk_oldcop cx_u.cx_blk.blku_oldcop
499 #define blk_oldmarksp cx_u.cx_blk.blku_oldmarksp
500 #define blk_oldscopesp cx_u.cx_blk.blku_oldscopesp
501 #define blk_oldpm cx_u.cx_blk.blku_oldpm
502 #define blk_gimme cx_u.cx_blk.blku_gimme
503 #define blk_sub cx_u.cx_blk.blk_u.blku_sub
504 #define blk_eval cx_u.cx_blk.blk_u.blku_eval
505 #define blk_loop cx_u.cx_blk.blk_u.blku_loop
506 #define blk_givwhen cx_u.cx_blk.blk_u.blku_givwhen
509 #define PUSHBLOCK(cx,t,sp) CXINC, cx = &cxstack[cxstack_ix], \
511 cx->blk_oldsp = sp - PL_stack_base, \
512 cx->blk_oldcop = PL_curcop, \
513 cx->blk_oldmarksp = PL_markstack_ptr - PL_markstack, \
514 cx->blk_oldscopesp = PL_scopestack_ix, \
515 cx->blk_oldpm = PL_curpm, \
516 cx->blk_gimme = (U8)gimme; \
517 DEBUG_l( PerlIO_printf(Perl_debug_log, "Entering block %ld, type %s\n", \
518 (long)cxstack_ix, PL_block_type[CxTYPE(cx)]); )
520 /* Exit a block (RETURN and LAST). */
521 #define POPBLOCK(cx,pm) cx = &cxstack[cxstack_ix--], \
522 newsp = PL_stack_base + cx->blk_oldsp, \
523 PL_curcop = cx->blk_oldcop, \
524 PL_markstack_ptr = PL_markstack + cx->blk_oldmarksp, \
525 PL_scopestack_ix = cx->blk_oldscopesp, \
526 pm = cx->blk_oldpm, \
527 gimme = cx->blk_gimme; \
528 DEBUG_SCOPE("POPBLOCK"); \
529 DEBUG_l( PerlIO_printf(Perl_debug_log, "Leaving block %ld, type %s\n", \
530 (long)cxstack_ix+1,PL_block_type[CxTYPE(cx)]); )
532 /* Continue a block elsewhere (NEXT and REDO). */
533 #define TOPBLOCK(cx) cx = &cxstack[cxstack_ix], \
534 PL_stack_sp = PL_stack_base + cx->blk_oldsp, \
535 PL_markstack_ptr = PL_markstack + cx->blk_oldmarksp, \
536 PL_scopestack_ix = cx->blk_oldscopesp, \
537 PL_curpm = cx->blk_oldpm; \
538 DEBUG_SCOPE("TOPBLOCK");
540 /* substitution context */
542 U16 sbu_type; /* what kind of context this is */
558 #define sb_iters cx_u.cx_subst.sbu_iters
559 #define sb_maxiters cx_u.cx_subst.sbu_maxiters
560 #define sb_rflags cx_u.cx_subst.sbu_rflags
561 #define sb_oldsave cx_u.cx_subst.sbu_oldsave
562 #define sb_once cx_u.cx_subst.sbu_once
563 #define sb_rxtainted cx_u.cx_subst.sbu_rxtainted
564 #define sb_orig cx_u.cx_subst.sbu_orig
565 #define sb_dstr cx_u.cx_subst.sbu_dstr
566 #define sb_targ cx_u.cx_subst.sbu_targ
567 #define sb_s cx_u.cx_subst.sbu_s
568 #define sb_m cx_u.cx_subst.sbu_m
569 #define sb_strend cx_u.cx_subst.sbu_strend
570 #define sb_rxres cx_u.cx_subst.sbu_rxres
571 #define sb_rx cx_u.cx_subst.sbu_rx
573 #define PUSHSUBST(cx) CXINC, cx = &cxstack[cxstack_ix], \
574 cx->sb_iters = iters, \
575 cx->sb_maxiters = maxiters, \
576 cx->sb_rflags = r_flags, \
577 cx->sb_oldsave = oldsave, \
578 cx->sb_once = once, \
579 cx->sb_rxtainted = rxtainted, \
580 cx->sb_orig = orig, \
581 cx->sb_dstr = dstr, \
582 cx->sb_targ = targ, \
585 cx->sb_strend = strend, \
586 cx->sb_rxres = NULL, \
588 cx->cx_type = CXt_SUBST; \
589 rxres_save(&cx->sb_rxres, rx); \
590 (void)ReREFCNT_inc(rx)
592 #define POPSUBST(cx) cx = &cxstack[cxstack_ix--]; \
593 rxres_free(&cx->sb_rxres); \
594 ReREFCNT_dec(cx->sb_rx)
599 struct subst cx_subst;
602 #define cx_type cx_u.cx_subst.sbu_type
604 #define CXTYPEMASK 0xff
615 /* private flags for CXt_SUB and CXt_NULL */
616 #define CXp_MULTICALL 0x00000400 /* part of a multicall (so don't
617 tear down context on exit). */
619 /* private flags for CXt_EVAL */
620 #define CXp_REAL 0x00000100 /* truly eval'', not a lookalike */
621 #define CXp_TRYBLOCK 0x00000200 /* eval{}, not eval'' or similar */
623 /* private flags for CXt_LOOP */
624 #define CXp_FOREACH 0x00000200 /* a foreach loop */
625 #define CXp_FOR_DEF 0x00000400 /* foreach using $_ */
627 # define CXp_PADVAR 0x00000100 /* itervar lives on pad, iterdata
628 has pad offset; if not set,
629 iterdata holds GV* */
630 # define CxPADLOOP(c) (((c)->cx_type & (CXt_LOOP|CXp_PADVAR)) \
631 == (CXt_LOOP|CXp_PADVAR))
634 #define CxTYPE(c) ((c)->cx_type & CXTYPEMASK)
635 #define CxMULTICALL(c) (((c)->cx_type & CXp_MULTICALL) \
637 #define CxREALEVAL(c) (((c)->cx_type & (CXt_EVAL|CXp_REAL)) \
638 == (CXt_EVAL|CXp_REAL))
639 #define CxTRYBLOCK(c) (((c)->cx_type & (CXt_EVAL|CXp_TRYBLOCK)) \
640 == (CXt_EVAL|CXp_TRYBLOCK))
641 #define CxFOREACH(c) (((c)->cx_type & (CXt_LOOP|CXp_FOREACH)) \
642 == (CXt_LOOP|CXp_FOREACH))
643 #define CxFOREACHDEF(c) (((c)->cx_type & (CXt_LOOP|CXp_FOREACH|CXp_FOR_DEF))\
644 == (CXt_LOOP|CXp_FOREACH|CXp_FOR_DEF))
646 #define CXINC (cxstack_ix < cxstack_max ? ++cxstack_ix : (cxstack_ix = cxinc()))
649 =head1 "Gimme" Values
653 =for apidoc AmU||G_SCALAR
654 Used to indicate scalar context. See C<GIMME_V>, C<GIMME>, and
657 =for apidoc AmU||G_ARRAY
658 Used to indicate list context. See C<GIMME_V>, C<GIMME> and
661 =for apidoc AmU||G_VOID
662 Used to indicate void context. See C<GIMME_V> and L<perlcall>.
664 =for apidoc AmU||G_DISCARD
665 Indicates that arguments returned from a callback should be discarded. See
668 =for apidoc AmU||G_EVAL
670 Used to force a Perl C<eval> wrapper around a callback. See
673 =for apidoc AmU||G_NOARGS
675 Indicates that no arguments are being sent to a callback. See
683 #define G_VOID 128 /* skip this bit when adding flags below */
685 /* extra flags for Perl_call_* routines */
686 #define G_DISCARD 2 /* Call FREETMPS. */
687 #define G_EVAL 4 /* Assume eval {} around subroutine call. */
688 #define G_NOARGS 8 /* Don't construct a @_ array. */
689 #define G_KEEPERR 16 /* Append errors to $@, don't overwrite it */
690 #define G_NODEBUG 32 /* Disable debugging at toplevel. */
691 #define G_METHOD 64 /* Calling method. */
692 #define G_FAKINGEVAL 256 /* Faking en eval context for call_sv or
695 /* flag bits for PL_in_eval */
696 #define EVAL_NULL 0 /* not in an eval */
697 #define EVAL_INEVAL 1 /* some enclosing scope is an eval */
698 #define EVAL_WARNONLY 2 /* used by yywarn() when calling yyerror() */
699 #define EVAL_KEEPERR 4 /* set by Perl_call_sv if G_KEEPERR */
700 #define EVAL_INREQUIRE 8 /* The code is being required. */
702 /* Support for switching (stack and block) contexts.
703 * This ensures magic doesn't invalidate local stack and cx pointers.
706 #define PERLSI_UNKNOWN -1
707 #define PERLSI_UNDEF 0
708 #define PERLSI_MAIN 1
709 #define PERLSI_MAGIC 2
710 #define PERLSI_SORT 3
711 #define PERLSI_SIGNAL 4
712 #define PERLSI_OVERLOAD 5
713 #define PERLSI_DESTROY 6
714 #define PERLSI_WARNHOOK 7
715 #define PERLSI_DIEHOOK 8
716 #define PERLSI_REQUIRE 9
719 AV * si_stack; /* stack for current runlevel */
720 PERL_CONTEXT * si_cxstack; /* context stack for runlevel */
721 I32 si_cxix; /* current context index */
722 I32 si_cxmax; /* maximum allocated index */
723 I32 si_type; /* type of runlevel */
724 struct stackinfo * si_prev;
725 struct stackinfo * si_next;
726 I32 si_markoff; /* offset where markstack begins for us.
727 * currently used only with DEBUGGING,
728 * but not #ifdef-ed for bincompat */
731 typedef struct stackinfo PERL_SI;
733 #define cxstack (PL_curstackinfo->si_cxstack)
734 #define cxstack_ix (PL_curstackinfo->si_cxix)
735 #define cxstack_max (PL_curstackinfo->si_cxmax)
738 # define SET_MARK_OFFSET \
739 PL_curstackinfo->si_markoff = PL_markstack_ptr - PL_markstack
741 # define SET_MARK_OFFSET NOOP
744 #define PUSHSTACKi(type) \
746 PERL_SI *next = PL_curstackinfo->si_next; \
748 next = new_stackinfo(32, 2048/sizeof(PERL_CONTEXT) - 1); \
749 next->si_prev = PL_curstackinfo; \
750 PL_curstackinfo->si_next = next; \
752 next->si_type = type; \
753 next->si_cxix = -1; \
754 AvFILLp(next->si_stack) = 0; \
755 SWITCHSTACK(PL_curstack,next->si_stack); \
756 PL_curstackinfo = next; \
760 #define PUSHSTACK PUSHSTACKi(PERLSI_UNKNOWN)
762 /* POPSTACK works with PL_stack_sp, so it may need to be bracketed by
763 * PUTBACK/SPAGAIN to flush/refresh any local SP that may be active */
767 PERL_SI * const prev = PL_curstackinfo->si_prev; \
769 PerlIO_printf(Perl_error_log, "panic: POPSTACK\n"); \
772 SWITCHSTACK(PL_curstack,prev->si_stack); \
773 /* don't free prev here, free them all at the END{} */ \
774 PL_curstackinfo = prev; \
777 #define POPSTACK_TO(s) \
779 while (PL_curstack != s) { \
785 #define IN_PERL_COMPILETIME (PL_curcop == &PL_compiling)
786 #define IN_PERL_RUNTIME (PL_curcop != &PL_compiling)
789 =head1 Multicall Functions
791 =for apidoc Ams||dMULTICALL
792 Declare local variables for a multicall. See L<perlcall/Lightweight Callbacks>.
794 =for apidoc Ams||PUSH_MULTICALL
795 Opening bracket for a lightweight callback.
796 See L<perlcall/Lightweight Callbacks>.
798 =for apidoc Ams||MULTICALL
799 Make a lightweight callback. See L<perlcall/Lightweight Callbacks>.
801 =for apidoc Ams||POP_MULTICALL
802 Closing bracket for a lightweight callback.
803 See L<perlcall/Lightweight Callbacks>.
809 SV **newsp; /* set by POPBLOCK */ \
813 bool multicall_oldcatch; \
814 U8 hasargs = 0 /* used by PUSHSUB */
816 #define PUSH_MULTICALL(the_cv) \
818 CV * const _nOnclAshIngNamE_ = the_cv; \
819 CV * const cv = _nOnclAshIngNamE_; \
820 AV * const padlist = CvPADLIST(cv); \
822 multicall_oldcatch = CATCH_GET; \
823 SAVETMPS; SAVEVPTR(PL_op); \
825 PUSHBLOCK(cx, CXt_SUB|CXp_MULTICALL, PL_stack_sp); \
827 if (++CvDEPTH(cv) >= 2) { \
828 PERL_STACK_OVERFLOW_CHECK(); \
829 Perl_pad_push(aTHX_ padlist, CvDEPTH(cv)); \
832 PAD_SET_CUR_NOSAVE(padlist, CvDEPTH(cv)); \
834 multicall_cop = CvSTART(cv); \
839 PL_op = multicall_cop; \
843 #define POP_MULTICALL \
845 LEAVESUB(multicall_cv); \
846 CvDEPTH(multicall_cv)--; \
847 POPBLOCK(cx,PL_curpm); \
848 CATCH_SET(multicall_oldcatch); \
854 * c-indentation-style: bsd
856 * indent-tabs-mode: t
859 * ex: set ts=8 sts=4 sw=4 noet: