3 * Copyright (C) 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
4 * 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, by Larry Wall and others
6 * You may distribute under the terms of either the GNU General Public
7 * License or the Artistic License, as specified in the README file.
9 * Control ops (cops) are one of the three ops OP_NEXTSTATE, OP_DBSTATE,
10 * and OP_SETSTATE that (loosely speaking) are separate statements.
11 * They hold information important for lexical state and error reporting.
12 * At run time, PL_curcop is set to point to the most recently executed cop,
13 * and thus can be used to determine our current state.
16 /* A jmpenv packages the state required to perform a proper non-local jump.
17 * Note that there is a start_env initialized when perl starts, and top_env
18 * points to this initially, so top_env should always be non-null.
20 * Existence of a non-null top_env->je_prev implies it is valid to call
21 * longjmp() at that runlevel (we make sure start_env.je_prev is always
22 * null to ensure this).
24 * je_mustcatch, when set at any runlevel to TRUE, means eval ops must
25 * establish a local jmpenv to handle exception traps. Care must be taken
26 * to restore the previous value of je_mustcatch before exiting the
27 * stack frame iff JMPENV_PUSH was not called in that stack frame.
32 struct jmpenv * je_prev;
33 Sigjmp_buf je_buf; /* only for use if !je_throw */
34 int je_ret; /* last exception thrown */
35 bool je_mustcatch; /* need to call longjmp()? */
38 typedef struct jmpenv JMPENV;
41 #define OP_REG_TO_MEM PL_opsave = op
42 #define OP_MEM_TO_REG op = PL_opsave
44 #define OP_REG_TO_MEM NOOP
45 #define OP_MEM_TO_REG NOOP
49 * How to build the first jmpenv.
51 * top_env needs to be non-zero. It points to an area
52 * in which longjmp() stuff is stored, as C callstack
53 * info there at least is thread specific this has to
54 * be per-thread. Otherwise a 'die' in a thread gives
55 * that thread the C stack of last thread to do an eval {}!
58 #define JMPENV_BOOTSTRAP \
60 Zero(&PL_start_env, 1, JMPENV); \
61 PL_start_env.je_ret = -1; \
62 PL_start_env.je_mustcatch = TRUE; \
63 PL_top_env = &PL_start_env; \
67 * PERL_FLEXIBLE_EXCEPTIONS
69 * All the flexible exceptions code has been removed.
70 * See the following threads for details:
72 * http://www.xray.mpe.mpg.de/mailing-lists/perl5-porters/2004-07/msg00378.html
74 * Joshua's original patches (which weren't applied) and discussion:
76 * http://www.xray.mpe.mpg.de/mailing-lists/perl5-porters/1998-02/msg01396.html
77 * http://www.xray.mpe.mpg.de/mailing-lists/perl5-porters/1998-02/msg01489.html
78 * http://www.xray.mpe.mpg.de/mailing-lists/perl5-porters/1998-02/msg01491.html
79 * http://www.xray.mpe.mpg.de/mailing-lists/perl5-porters/1998-02/msg01608.html
80 * http://www.xray.mpe.mpg.de/mailing-lists/perl5-porters/1998-02/msg02144.html
81 * http://www.xray.mpe.mpg.de/mailing-lists/perl5-porters/1998-02/msg02998.html
83 * Chip's reworked patch and discussion:
85 * http://www.xray.mpe.mpg.de/mailing-lists/perl5-porters/1999-03/msg00520.html
87 * The flaw in these patches (which went unnoticed at the time) was
88 * that they moved some code that could potentially die() out of the
89 * region protected by the setjmp()s. This caused exceptions within
90 * END blocks and such to not be handled by the correct setjmp().
92 * The original patches that introduces flexible exceptions were:
94 * http://public.activestate.com/cgi-bin/perlbrowse?patch=3386
95 * http://public.activestate.com/cgi-bin/perlbrowse?patch=5162
98 #define dJMPENV JMPENV cur_env
100 #define JMPENV_PUSH(v) \
102 DEBUG_l(Perl_deb(aTHX_ "Setting up jumplevel %p, was %p\n", \
103 (void*)&cur_env, (void*)PL_top_env)); \
104 cur_env.je_prev = PL_top_env; \
106 cur_env.je_ret = PerlProc_setjmp(cur_env.je_buf, SCOPE_SAVES_SIGNAL_MASK); \
108 PL_top_env = &cur_env; \
109 cur_env.je_mustcatch = FALSE; \
110 (v) = cur_env.je_ret; \
115 DEBUG_l(Perl_deb(aTHX_ "popping jumplevel was %p, now %p\n", \
116 (void*)PL_top_env, (void*)cur_env.je_prev)); \
117 PL_top_env = cur_env.je_prev; \
120 #define JMPENV_JUMP(v) \
123 if (PL_top_env->je_prev) \
124 PerlProc_longjmp(PL_top_env->je_buf, (v)); \
126 PerlProc_exit(STATUS_EXIT); \
127 PerlIO_printf(PerlIO_stderr(), "panic: top_env\n"); \
131 #define CATCH_GET (PL_top_env->je_mustcatch)
132 #define CATCH_SET(v) (PL_top_env->je_mustcatch = (v))
135 #include "mydtrace.h"
139 /* On LP64 putting this here takes advantage of the fact that BASEOP isn't
140 an exact multiple of 8 bytes to save structure padding. */
141 line_t cop_line; /* line # of this command */
142 char * cop_label; /* label for this construct */
144 char * cop_stashpv; /* package line was compiled in */
145 char * cop_file; /* file name the following line # is from */
147 HV * cop_stash; /* package line was compiled in */
148 GV * cop_filegv; /* file the following line # is from */
150 U32 cop_hints; /* hints bits from pragmata */
151 U32 cop_seq; /* parse sequence number */
152 /* Beware. mg.c and warnings.pl assume the type of this is STRLEN *: */
153 STRLEN * cop_warnings; /* lexical warnings bitmask */
154 /* compile time state of %^H. See the comment in op.c for how this is
155 used to recreate a hash to return from caller. */
156 struct refcounted_he * cop_hints_hash;
160 # define CopFILE(c) ((c)->cop_file)
161 # define CopFILEGV(c) (CopFILE(c) \
162 ? gv_fetchfile(CopFILE(c)) : NULL)
165 # define CopFILE_set(c,pv) ((c)->cop_file = savepv(pv))
166 # define CopFILE_setn(c,pv,l) ((c)->cop_file = savepv((pv),(l)))
168 # define CopFILE_set(c,pv) ((c)->cop_file = savesharedpv(pv))
169 # define CopFILE_setn(c,pv,l) ((c)->cop_file = savesharedpvn((pv),(l)))
172 # define CopFILESV(c) (CopFILE(c) \
173 ? GvSV(gv_fetchfile(CopFILE(c))) : NULL)
174 # define CopFILEAV(c) (CopFILE(c) \
175 ? GvAV(gv_fetchfile(CopFILE(c))) : NULL)
177 # define CopFILEAVx(c) (assert(CopFILE(c)), \
178 GvAV(gv_fetchfile(CopFILE(c))))
180 # define CopFILEAVx(c) (GvAV(gv_fetchfile(CopFILE(c))))
182 # define CopSTASHPV(c) ((c)->cop_stashpv)
185 # define CopSTASHPV_set(c,pv) ((c)->cop_stashpv = ((pv) ? savepv(pv) : NULL))
187 # define CopSTASHPV_set(c,pv) ((c)->cop_stashpv = savesharedpv(pv))
190 # define CopSTASH(c) (CopSTASHPV(c) \
191 ? gv_stashpv(CopSTASHPV(c),GV_ADD) : NULL)
192 # define CopSTASH_set(c,hv) CopSTASHPV_set(c, (hv) ? HvNAME_get(hv) : NULL)
193 # define CopSTASH_eq(c,hv) ((hv) && stashpv_hvname_match(c,hv))
194 # define CopLABEL(c) ((c)->cop_label)
195 # define CopLABEL_set(c,pv) (CopLABEL(c) = (pv))
197 # define CopSTASH_free(c) SAVECOPSTASH_FREE(c)
198 # define CopFILE_free(c) SAVECOPFILE_FREE(c)
199 # define CopLABEL_free(c) SAVECOPLABEL_FREE(c)
200 # define CopLABEL_alloc(pv) ((pv)?savepv(pv):NULL)
202 # define CopSTASH_free(c) PerlMemShared_free(CopSTASHPV(c))
203 # define CopFILE_free(c) (PerlMemShared_free(CopFILE(c)),(CopFILE(c) = NULL))
204 # define CopLABEL_free(c) (PerlMemShared_free(CopLABEL(c)),(CopLABEL(c) = NULL))
205 # define CopLABEL_alloc(pv) ((pv)?savesharedpv(pv):NULL)
208 # define CopFILEGV(c) ((c)->cop_filegv)
209 # define CopFILEGV_set(c,gv) ((c)->cop_filegv = (GV*)SvREFCNT_inc(gv))
210 # define CopFILE_set(c,pv) CopFILEGV_set((c), gv_fetchfile(pv))
211 # define CopFILE_setn(c,pv,l) CopFILEGV_set((c), gv_fetchfile_flags((pv),(l),0))
212 # define CopFILESV(c) (CopFILEGV(c) ? GvSV(CopFILEGV(c)) : NULL)
213 # define CopFILEAV(c) (CopFILEGV(c) ? GvAV(CopFILEGV(c)) : NULL)
215 # define CopFILEAVx(c) (assert(CopFILEGV(c)), GvAV(CopFILEGV(c)))
217 # define CopFILEAVx(c) (GvAV(CopFILEGV(c)))
219 # define CopFILE(c) (CopFILEGV(c) && GvSV(CopFILEGV(c)) \
220 ? SvPVX(GvSV(CopFILEGV(c))) : NULL)
221 # define CopSTASH(c) ((c)->cop_stash)
222 # define CopLABEL(c) ((c)->cop_label)
223 # define CopSTASH_set(c,hv) ((c)->cop_stash = (hv))
224 # define CopSTASHPV(c) (CopSTASH(c) ? HvNAME_get(CopSTASH(c)) : NULL)
225 /* cop_stash is not refcounted */
226 # define CopSTASHPV_set(c,pv) CopSTASH_set((c), gv_stashpv(pv,GV_ADD))
227 # define CopSTASH_eq(c,hv) (CopSTASH(c) == (hv))
228 # define CopLABEL_alloc(pv) ((pv)?savepv(pv):NULL)
229 # define CopLABEL_set(c,pv) (CopLABEL(c) = (pv))
230 # define CopSTASH_free(c)
231 # define CopFILE_free(c) (SvREFCNT_dec(CopFILEGV(c)),(CopFILEGV(c) = NULL))
232 # define CopLABEL_free(c) (Safefree(CopLABEL(c)),(CopLABEL(c) = NULL))
234 #endif /* USE_ITHREADS */
236 #define CopSTASH_ne(c,hv) (!CopSTASH_eq(c,hv))
237 #define CopLINE(c) ((c)->cop_line)
238 #define CopLINE_inc(c) (++CopLINE(c))
239 #define CopLINE_dec(c) (--CopLINE(c))
240 #define CopLINE_set(c,l) (CopLINE(c) = (l))
242 /* OutCopFILE() is CopFILE for output (caller, die, warn, etc.) */
243 #ifdef MACOS_TRADITIONAL
244 # define OutCopFILE(c) MacPerl_MPWFileName(CopFILE(c))
246 # define OutCopFILE(c) CopFILE(c)
249 /* If $[ is non-zero, it's stored in cop_hints under the key "$[", and
250 HINT_ARYBASE is set to indicate this.
251 Setting it is ineficient due to the need to create 2 mortal SVs, but as
252 using $[ is highly discouraged, no sane Perl code will be using it. */
253 #define CopARYBASE_get(c) \
254 ((CopHINTS_get(c) & HINT_ARYBASE) \
255 ? SvIV(Perl_refcounted_he_fetch(aTHX_ (c)->cop_hints_hash, 0, \
258 #define CopARYBASE_set(c, b) STMT_START { \
259 if (b || ((c)->cop_hints & HINT_ARYBASE)) { \
260 (c)->cop_hints |= HINT_ARYBASE; \
261 if ((c) == &PL_compiling) \
262 PL_hints |= HINT_LOCALIZE_HH | HINT_ARYBASE; \
263 (c)->cop_hints_hash \
264 = Perl_refcounted_he_new(aTHX_ (c)->cop_hints_hash, \
265 newSVpvs_flags("$[", SVs_TEMP), \
266 sv_2mortal(newSViv(b))); \
270 /* FIXME NATIVE_HINTS if this is changed from op_private (see perl.h) */
271 #define CopHINTS_get(c) ((c)->cop_hints + 0)
272 #define CopHINTS_set(c, h) STMT_START { \
273 (c)->cop_hints = (h); \
277 * Here we have some enormously heavy (or at least ponderous) wizardry.
280 /* subroutine context */
282 OP * retop; /* op to execute on exit from sub */
283 /* Above here is the same for sub, format and eval. */
286 U8 lval; /* XXX merge lval and hasargs? */
287 /* Above here is the same for sub and format. */
296 struct block_format {
297 OP * retop; /* op to execute on exit from sub */
298 /* Above here is the same for sub, format and eval. */
301 U8 lval; /* XXX merge lval and hasargs? */
302 /* Above here is the same for sub and format. */
307 /* base for the next two macros. Don't use directly.
308 * Note that the refcnt of the cv is incremented twice; The CX one is
309 * decremented by LEAVESUB, the other by LEAVE. */
311 #define PUSHSUB_BASE(cx) \
312 ENTRY_PROBE(GvENAME(CvGV(cv)), \
313 CopFILE((COP*)CvSTART(cv)), \
314 CopLINE((COP*)CvSTART(cv))); \
316 cx->blk_sub.cv = cv; \
317 cx->blk_sub.olddepth = CvDEPTH(cv); \
318 cx->blk_sub.hasargs = hasargs; \
319 cx->blk_sub.retop = NULL; \
320 if (!CvDEPTH(cv)) { \
321 SvREFCNT_inc_simple_void_NN(cv); \
322 SvREFCNT_inc_simple_void_NN(cv); \
327 #define PUSHSUB(cx) \
329 cx->blk_sub.lval = PL_op->op_private & \
330 (OPpLVAL_INTRO|OPpENTERSUB_INARGS);
332 /* variant for use by OP_DBSTATE, where op_private holds hint bits */
333 #define PUSHSUB_DB(cx) \
335 cx->blk_sub.lval = 0;
338 #define PUSHFORMAT(cx, retop) \
339 cx->blk_format.cv = cv; \
340 cx->blk_format.gv = gv; \
341 cx->blk_format.retop = (retop); \
342 cx->blk_format.hasargs = 0; \
343 cx->blk_format.dfoutgv = PL_defoutgv; \
344 SvREFCNT_inc_void(cx->blk_format.dfoutgv)
346 #define POP_SAVEARRAY() \
348 SvREFCNT_dec(GvAV(PL_defgv)); \
349 GvAV(PL_defgv) = cx->blk_sub.savearray; \
352 /* junk in @_ spells trouble when cloning CVs and in pp_caller(), so don't
353 * leave any (a fast av_clear(ary), basically) */
354 #define CLEAR_ARGARRAY(ary) \
356 AvMAX(ary) += AvARRAY(ary) - AvALLOC(ary); \
357 AvARRAY(ary) = AvALLOC(ary); \
361 #define POPSUB(cx,sv) \
363 RETURN_PROBE(GvENAME(CvGV((CV*)cx->blk_sub.cv)), \
364 CopFILE((COP*)CvSTART((CV*)cx->blk_sub.cv)), \
365 CopLINE((COP*)CvSTART((CV*)cx->blk_sub.cv))); \
367 if (cx->blk_sub.hasargs) { \
369 /* abandon @_ if it got reified */ \
370 if (AvREAL(cx->blk_sub.argarray)) { \
371 const SSize_t fill = AvFILLp(cx->blk_sub.argarray); \
372 SvREFCNT_dec(cx->blk_sub.argarray); \
373 cx->blk_sub.argarray = newAV(); \
374 av_extend(cx->blk_sub.argarray, fill); \
375 AvREIFY_only(cx->blk_sub.argarray); \
376 CX_CURPAD_SV(cx->blk_sub, 0) = (SV*)cx->blk_sub.argarray; \
379 CLEAR_ARGARRAY(cx->blk_sub.argarray); \
382 sv = (SV*)cx->blk_sub.cv; \
383 if (sv && (CvDEPTH((CV*)sv) = cx->blk_sub.olddepth)) \
387 #define LEAVESUB(sv) \
393 #define POPFORMAT(cx) \
394 setdefout(cx->blk_format.dfoutgv); \
395 SvREFCNT_dec(cx->blk_format.dfoutgv);
399 OP * retop; /* op to execute on exit from eval */
400 /* Above here is the same for sub, format and eval. */
407 JMPENV * cur_top_env; /* value of PL_top_env when eval CX created */
410 #define PUSHEVAL(cx,n,fgv) \
412 cx->blk_eval.old_in_eval = PL_in_eval; \
413 cx->blk_eval.old_op_type = PL_op->op_type; \
414 cx->blk_eval.old_namesv = (n ? newSVpv(n,0) : NULL); \
415 cx->blk_eval.old_eval_root = PL_eval_root; \
416 cx->blk_eval.cur_text = PL_parser ? PL_parser->linestr : NULL; \
417 cx->blk_eval.cv = NULL; /* set by doeval(), as applicable */ \
418 cx->blk_eval.retop = NULL; \
419 cx->blk_eval.cur_top_env = PL_top_env; \
422 #define POPEVAL(cx) \
424 PL_in_eval = cx->blk_eval.old_in_eval; \
425 optype = cx->blk_eval.old_op_type; \
426 PL_eval_root = cx->blk_eval.old_eval_root; \
427 if (cx->blk_eval.old_namesv) \
428 sv_2mortal(cx->blk_eval.old_namesv); \
434 LOOP * my_op; /* My op, that contains redo, next and last ops. */
435 /* (except for non_ithreads we need to modify next_op in pp_ctl.c, hence
436 why next_op is conditionally defined below.) */
445 /* (from inspection of source code) for a .. range of strings this is the
448 /* (from inspection of source code) for a foreach loop this is the array
449 being iterated over. For a .. range of numbers it's the current value.
450 A check is often made on the SvTYPE of iterary to determine whether
451 we are iterating over an array or a range. (numbers or strings) */
454 /* (from inspection of source code) for a .. range of numbers this is the
458 /* It might be possible to squeeze this structure further. As best I can tell
459 itermax and iterlval are never used at the same time, so it might be possible
460 to make them into a union. However, I'm not confident that there are enough
461 flag bits/NULLable pointers in this structure alone to encode which is
462 active. There is, however, U8 of space free in struct block, which could be
463 used. Right now it may not be worth squeezing this structure further, as it's
464 the largest part of struct block, and currently struct block is 64 bytes on
465 an ILP32 system, which will give good cache alignment.
469 # define CxITERVAR(c) \
470 ((c)->blk_loop.iterdata \
472 ? &CX_CURPAD_SV( (c)->blk_loop, \
473 INT2PTR(PADOFFSET, (c)->blk_loop.iterdata)) \
474 : &GvSV((GV*)(c)->blk_loop.iterdata)) \
476 # define CX_ITERDATA_SET(cx,idata) \
477 CX_CURPAD_SAVE(cx->blk_loop); \
478 if ((cx->blk_loop.iterdata = (idata))) \
479 cx->blk_loop.itersave = SvREFCNT_inc(*CxITERVAR(cx)); \
481 cx->blk_loop.itersave = NULL;
483 # define CxITERVAR(c) ((c)->blk_loop.itervar)
484 # define CX_ITERDATA_SET(cx,ivar) \
485 if ((cx->blk_loop.itervar = (SV**)(ivar))) \
486 cx->blk_loop.itersave = SvREFCNT_inc(*CxITERVAR(cx)); \
488 cx->blk_loop.itersave = NULL;
490 #define CxLABEL(c) (0 + (c)->blk_oldcop->cop_label)
493 # define PUSHLOOP_OP_NEXT /* No need to do anything. */
494 # define CX_LOOP_NEXTOP_GET(cx) ((cx)->blk_loop.my_op->op_nextop + 0)
496 # define PUSHLOOP_OP_NEXT cx->blk_loop.next_op = cLOOP->op_nextop
497 # define CX_LOOP_NEXTOP_GET(cx) ((cx)->blk_loop.next_op + 0)
500 #define PUSHLOOP(cx, dat, s) \
501 cx->blk_loop.resetsp = s - PL_stack_base; \
502 cx->blk_loop.my_op = cLOOP; \
504 cx->blk_loop.iterlval = NULL; \
505 cx->blk_loop.iterary = NULL; \
506 cx->blk_loop.iterix = -1; \
507 CX_ITERDATA_SET(cx,dat);
509 #define POPLOOP(cx) \
510 SvREFCNT_dec(cx->blk_loop.iterlval); \
511 if (CxITERVAR(cx)) { \
512 if (SvPADMY(cx->blk_loop.itersave)) { \
513 SV ** const s_v_p = CxITERVAR(cx); \
514 sv_2mortal(*s_v_p); \
515 *s_v_p = cx->blk_loop.itersave; \
518 SvREFCNT_dec(cx->blk_loop.itersave); \
521 if (cx->blk_loop.iterary && cx->blk_loop.iterary != PL_curstack)\
522 SvREFCNT_dec(cx->blk_loop.iterary);
524 /* given/when context */
525 struct block_givwhen {
529 #define PUSHGIVEN(cx) \
530 cx->blk_givwhen.leave_op = cLOGOP->op_other;
532 #define PUSHWHEN PUSHGIVEN
534 /* context common to subroutines, evals and loops */
536 U16 blku_type; /* what kind of context this is */
537 U8 blku_gimme; /* is this block running in list context? */
538 U8 blku_spare; /* Padding to match with struct subst */
539 I32 blku_oldsp; /* stack pointer to copy stuff down to */
540 COP * blku_oldcop; /* old curcop pointer */
541 I32 blku_oldmarksp; /* mark stack index */
542 I32 blku_oldscopesp; /* scope stack index */
543 PMOP * blku_oldpm; /* values of pattern match vars */
546 struct block_sub blku_sub;
547 struct block_format blku_format;
548 struct block_eval blku_eval;
549 struct block_loop blku_loop;
550 struct block_givwhen blku_givwhen;
553 #define blk_oldsp cx_u.cx_blk.blku_oldsp
554 #define blk_oldcop cx_u.cx_blk.blku_oldcop
555 #define blk_oldmarksp cx_u.cx_blk.blku_oldmarksp
556 #define blk_oldscopesp cx_u.cx_blk.blku_oldscopesp
557 #define blk_oldpm cx_u.cx_blk.blku_oldpm
558 #define blk_gimme cx_u.cx_blk.blku_gimme
559 #define blk_sub cx_u.cx_blk.blk_u.blku_sub
560 #define blk_format cx_u.cx_blk.blk_u.blku_format
561 #define blk_eval cx_u.cx_blk.blk_u.blku_eval
562 #define blk_loop cx_u.cx_blk.blk_u.blku_loop
563 #define blk_givwhen cx_u.cx_blk.blk_u.blku_givwhen
566 #define PUSHBLOCK(cx,t,sp) CXINC, cx = &cxstack[cxstack_ix], \
568 cx->blk_oldsp = sp - PL_stack_base, \
569 cx->blk_oldcop = PL_curcop, \
570 cx->blk_oldmarksp = PL_markstack_ptr - PL_markstack, \
571 cx->blk_oldscopesp = PL_scopestack_ix, \
572 cx->blk_oldpm = PL_curpm, \
573 cx->blk_gimme = (U8)gimme; \
574 DEBUG_l( PerlIO_printf(Perl_debug_log, "Entering block %ld, type %s\n", \
575 (long)cxstack_ix, PL_block_type[CxTYPE(cx)]); )
577 /* Exit a block (RETURN and LAST). */
578 #define POPBLOCK(cx,pm) cx = &cxstack[cxstack_ix--], \
579 newsp = PL_stack_base + cx->blk_oldsp, \
580 PL_curcop = cx->blk_oldcop, \
581 PL_markstack_ptr = PL_markstack + cx->blk_oldmarksp, \
582 PL_scopestack_ix = cx->blk_oldscopesp, \
583 pm = cx->blk_oldpm, \
584 gimme = cx->blk_gimme; \
585 DEBUG_SCOPE("POPBLOCK"); \
586 DEBUG_l( PerlIO_printf(Perl_debug_log, "Leaving block %ld, type %s\n", \
587 (long)cxstack_ix+1,PL_block_type[CxTYPE(cx)]); )
589 /* Continue a block elsewhere (NEXT and REDO). */
590 #define TOPBLOCK(cx) cx = &cxstack[cxstack_ix], \
591 PL_stack_sp = PL_stack_base + cx->blk_oldsp, \
592 PL_markstack_ptr = PL_markstack + cx->blk_oldmarksp, \
593 PL_scopestack_ix = cx->blk_oldscopesp, \
594 PL_curpm = cx->blk_oldpm; \
595 DEBUG_SCOPE("TOPBLOCK");
597 /* substitution context */
599 U16 sbu_type; /* what kind of context this is */
600 U8 sbu_once; /* Actually both booleans, but U8 to matches */
601 U8 sbu_rxtainted; /* struct block */
615 #define sb_iters cx_u.cx_subst.sbu_iters
616 #define sb_maxiters cx_u.cx_subst.sbu_maxiters
617 #define sb_rflags cx_u.cx_subst.sbu_rflags
618 #define sb_oldsave cx_u.cx_subst.sbu_oldsave
619 #define sb_once cx_u.cx_subst.sbu_once
620 #define sb_rxtainted cx_u.cx_subst.sbu_rxtainted
621 #define sb_orig cx_u.cx_subst.sbu_orig
622 #define sb_dstr cx_u.cx_subst.sbu_dstr
623 #define sb_targ cx_u.cx_subst.sbu_targ
624 #define sb_s cx_u.cx_subst.sbu_s
625 #define sb_m cx_u.cx_subst.sbu_m
626 #define sb_strend cx_u.cx_subst.sbu_strend
627 #define sb_rxres cx_u.cx_subst.sbu_rxres
628 #define sb_rx cx_u.cx_subst.sbu_rx
630 #define PUSHSUBST(cx) CXINC, cx = &cxstack[cxstack_ix], \
631 cx->sb_iters = iters, \
632 cx->sb_maxiters = maxiters, \
633 cx->sb_rflags = r_flags, \
634 cx->sb_oldsave = oldsave, \
635 cx->sb_once = once, \
636 cx->sb_rxtainted = rxtainted, \
637 cx->sb_orig = orig, \
638 cx->sb_dstr = dstr, \
639 cx->sb_targ = targ, \
642 cx->sb_strend = strend, \
643 cx->sb_rxres = NULL, \
645 cx->cx_type = CXt_SUBST; \
646 rxres_save(&cx->sb_rxres, rx); \
647 (void)ReREFCNT_inc(rx)
649 #define POPSUBST(cx) cx = &cxstack[cxstack_ix--]; \
650 rxres_free(&cx->sb_rxres); \
651 ReREFCNT_dec(cx->sb_rx)
656 struct subst cx_subst;
659 #define cx_type cx_u.cx_subst.sbu_type
661 #define CXTYPEMASK 0xff
672 /* private flags for CXt_SUB and CXt_NULL */
673 #define CXp_MULTICALL 0x00000400 /* part of a multicall (so don't
674 tear down context on exit). */
676 /* private flags for CXt_EVAL */
677 #define CXp_REAL 0x00000100 /* truly eval'', not a lookalike */
678 #define CXp_TRYBLOCK 0x00000200 /* eval{}, not eval'' or similar */
680 /* private flags for CXt_LOOP */
681 #define CXp_FOREACH 0x00000200 /* a foreach loop */
682 #define CXp_FOR_DEF 0x00000400 /* foreach using $_ */
684 # define CXp_PADVAR 0x00000100 /* itervar lives on pad, iterdata
685 has pad offset; if not set,
686 iterdata holds GV* */
687 # define CxPADLOOP(c) (((c)->cx_type & (CXt_LOOP|CXp_PADVAR)) \
688 == (CXt_LOOP|CXp_PADVAR))
691 #define CxTYPE(c) ((c)->cx_type & CXTYPEMASK)
692 #define CxMULTICALL(c) (((c)->cx_type & CXp_MULTICALL) \
694 #define CxREALEVAL(c) (((c)->cx_type & (CXTYPEMASK|CXp_REAL)) \
695 == (CXt_EVAL|CXp_REAL))
696 #define CxTRYBLOCK(c) (((c)->cx_type & (CXTYPEMASK|CXp_TRYBLOCK)) \
697 == (CXt_EVAL|CXp_TRYBLOCK))
698 #define CxFOREACH(c) (((c)->cx_type & (CXTYPEMASK|CXp_FOREACH)) \
699 == (CXt_LOOP|CXp_FOREACH))
700 #define CxFOREACHDEF(c) (((c)->cx_type & (CXTYPEMASK|CXp_FOREACH|CXp_FOR_DEF))\
701 == (CXt_LOOP|CXp_FOREACH|CXp_FOR_DEF))
703 #define CXINC (cxstack_ix < cxstack_max ? ++cxstack_ix : (cxstack_ix = cxinc()))
706 =head1 "Gimme" Values
710 =for apidoc AmU||G_SCALAR
711 Used to indicate scalar context. See C<GIMME_V>, C<GIMME>, and
714 =for apidoc AmU||G_ARRAY
715 Used to indicate list context. See C<GIMME_V>, C<GIMME> and
718 =for apidoc AmU||G_VOID
719 Used to indicate void context. See C<GIMME_V> and L<perlcall>.
721 =for apidoc AmU||G_DISCARD
722 Indicates that arguments returned from a callback should be discarded. See
725 =for apidoc AmU||G_EVAL
727 Used to force a Perl C<eval> wrapper around a callback. See
730 =for apidoc AmU||G_NOARGS
732 Indicates that no arguments are being sent to a callback. See
740 #define G_VOID 128 /* skip this bit when adding flags below */
742 /* extra flags for Perl_call_* routines */
743 #define G_DISCARD 2 /* Call FREETMPS.
744 Don't change this without consulting the
745 hash actions codes defined in hv.h */
746 #define G_EVAL 4 /* Assume eval {} around subroutine call. */
747 #define G_NOARGS 8 /* Don't construct a @_ array. */
748 #define G_KEEPERR 16 /* Append errors to $@, don't overwrite it */
749 #define G_NODEBUG 32 /* Disable debugging at toplevel. */
750 #define G_METHOD 64 /* Calling method. */
751 #define G_FAKINGEVAL 256 /* Faking an eval context for call_sv or
754 /* flag bits for PL_in_eval */
755 #define EVAL_NULL 0 /* not in an eval */
756 #define EVAL_INEVAL 1 /* some enclosing scope is an eval */
757 #define EVAL_WARNONLY 2 /* used by yywarn() when calling yyerror() */
758 #define EVAL_KEEPERR 4 /* set by Perl_call_sv if G_KEEPERR */
759 #define EVAL_INREQUIRE 8 /* The code is being required. */
761 /* Support for switching (stack and block) contexts.
762 * This ensures magic doesn't invalidate local stack and cx pointers.
765 #define PERLSI_UNKNOWN -1
766 #define PERLSI_UNDEF 0
767 #define PERLSI_MAIN 1
768 #define PERLSI_MAGIC 2
769 #define PERLSI_SORT 3
770 #define PERLSI_SIGNAL 4
771 #define PERLSI_OVERLOAD 5
772 #define PERLSI_DESTROY 6
773 #define PERLSI_WARNHOOK 7
774 #define PERLSI_DIEHOOK 8
775 #define PERLSI_REQUIRE 9
778 AV * si_stack; /* stack for current runlevel */
779 PERL_CONTEXT * si_cxstack; /* context stack for runlevel */
780 struct stackinfo * si_prev;
781 struct stackinfo * si_next;
782 I32 si_cxix; /* current context index */
783 I32 si_cxmax; /* maximum allocated index */
784 I32 si_type; /* type of runlevel */
785 I32 si_markoff; /* offset where markstack begins for us.
786 * currently used only with DEBUGGING,
787 * but not #ifdef-ed for bincompat */
790 typedef struct stackinfo PERL_SI;
792 #define cxstack (PL_curstackinfo->si_cxstack)
793 #define cxstack_ix (PL_curstackinfo->si_cxix)
794 #define cxstack_max (PL_curstackinfo->si_cxmax)
797 # define SET_MARK_OFFSET \
798 PL_curstackinfo->si_markoff = PL_markstack_ptr - PL_markstack
800 # define SET_MARK_OFFSET NOOP
803 #define PUSHSTACKi(type) \
805 PERL_SI *next = PL_curstackinfo->si_next; \
807 next = new_stackinfo(32, 2048/sizeof(PERL_CONTEXT) - 1); \
808 next->si_prev = PL_curstackinfo; \
809 PL_curstackinfo->si_next = next; \
811 next->si_type = type; \
812 next->si_cxix = -1; \
813 AvFILLp(next->si_stack) = 0; \
814 SWITCHSTACK(PL_curstack,next->si_stack); \
815 PL_curstackinfo = next; \
819 #define PUSHSTACK PUSHSTACKi(PERLSI_UNKNOWN)
821 /* POPSTACK works with PL_stack_sp, so it may need to be bracketed by
822 * PUTBACK/SPAGAIN to flush/refresh any local SP that may be active */
826 PERL_SI * const prev = PL_curstackinfo->si_prev; \
828 PerlIO_printf(Perl_error_log, "panic: POPSTACK\n"); \
831 SWITCHSTACK(PL_curstack,prev->si_stack); \
832 /* don't free prev here, free them all at the END{} */ \
833 PL_curstackinfo = prev; \
836 #define POPSTACK_TO(s) \
838 while (PL_curstack != s) { \
844 #define IN_PERL_COMPILETIME (PL_curcop == &PL_compiling)
845 #define IN_PERL_RUNTIME (PL_curcop != &PL_compiling)
848 =head1 Multicall Functions
850 =for apidoc Ams||dMULTICALL
851 Declare local variables for a multicall. See L<perlcall/Lightweight Callbacks>.
853 =for apidoc Ams||PUSH_MULTICALL
854 Opening bracket for a lightweight callback.
855 See L<perlcall/Lightweight Callbacks>.
857 =for apidoc Ams||MULTICALL
858 Make a lightweight callback. See L<perlcall/Lightweight Callbacks>.
860 =for apidoc Ams||POP_MULTICALL
861 Closing bracket for a lightweight callback.
862 See L<perlcall/Lightweight Callbacks>.
868 SV **newsp; /* set by POPBLOCK */ \
872 bool multicall_oldcatch; \
873 U8 hasargs = 0 /* used by PUSHSUB */
875 #define PUSH_MULTICALL(the_cv) \
877 CV * const _nOnclAshIngNamE_ = the_cv; \
878 CV * const cv = _nOnclAshIngNamE_; \
879 AV * const padlist = CvPADLIST(cv); \
881 multicall_oldcatch = CATCH_GET; \
882 SAVETMPS; SAVEVPTR(PL_op); \
884 PUSHBLOCK(cx, CXt_SUB|CXp_MULTICALL, PL_stack_sp); \
886 if (++CvDEPTH(cv) >= 2) { \
887 PERL_STACK_OVERFLOW_CHECK(); \
888 Perl_pad_push(aTHX_ padlist, CvDEPTH(cv)); \
891 PAD_SET_CUR_NOSAVE(padlist, CvDEPTH(cv)); \
893 multicall_cop = CvSTART(cv); \
898 PL_op = multicall_cop; \
902 #define POP_MULTICALL \
904 LEAVESUB(multicall_cv); \
905 CvDEPTH(multicall_cv)--; \
906 POPBLOCK(cx,PL_curpm); \
907 CATCH_SET(multicall_oldcatch); \
913 * c-indentation-style: bsd
915 * indent-tabs-mode: t
918 * ex: set ts=8 sts=4 sw=4 noet: