1 /* This file (config_H) is a sample config.h file. If you are unable
2 to successfully run Configure, copy this file to config.h and
3 edit it to suit your system.
6 * This file was produced by running the config_h.SH script, which
7 * gets its values from config.sh, which is generally produced by
10 * Feel free to modify any of this as the need arises. Note, however,
11 * that running config_h.SH again will wipe out any changes you've made.
12 * For a more permanent change edit config.sh and rerun config_h.SH.
14 * $Id: Config_h.U,v 3.0.1.5 1997/02/28 14:57:43 ram Exp $
18 * Package name : perl5
19 * Source directory : .
20 * Configuration time: Mon Jun 8 12:25:25 EDT 1998
21 * Configured by : doughera
22 * Target system : linux fractal 2.0.33 #1 tue feb 3 10:11:46 est 1998 i686 unknown
29 * This symbol holds the complete pathname to the sed program.
31 #define LOC_SED "/bin/sed" /**/
34 * This symbol holds the path of the bin directory where the package will
35 * be installed. Program must be prepared to deal with ~name substitution.
38 * This symbol is the filename expanded version of the BIN symbol, for
39 * programs that do not want to deal with that at run-time.
41 #define BIN "/opt/perl/bin" /**/
42 #define BIN_EXP "/opt/perl/bin" /**/
45 * This symbol contains the first part of the string which will invoke
46 * the C preprocessor on the standard input and produce to standard
47 * output. Typical value of "cc -E" or "/lib/cpp", but it can also
48 * call a wrapper. See CPPRUN.
51 * This symbol contains the second part of the string which will invoke
52 * the C preprocessor on the standard input and produce to standard
53 * output. This symbol will have the value "-" if CPPSTDIN needs a minus
54 * to specify standard input, otherwise the value is "".
56 #define CPPSTDIN "cc -E"
60 * This symbol, if defined, indicates that the alarm routine is
63 #define HAS_ALARM /**/
66 * This symbol indicates the C compiler can check for function attributes,
67 * such as printf formats. This is normally only supported by GNU cc.
69 #define HASATTRIBUTE /**/
71 #define __attribute__(_arg_)
75 * This symbol is defined if the bcmp() routine is available to
76 * compare blocks of memory.
81 * This symbol is defined if the bcopy() routine is available to
82 * copy blocks of memory.
84 #define HAS_BCOPY /**/
87 * This symbol is defined if the bzero() routine is available to
88 * set a memory block to 0.
90 #define HAS_BZERO /**/
93 * This symbol, if defined, indicates that the chown routine is
96 #define HAS_CHOWN /**/
99 * This symbol, if defined, indicates that the chroot routine is
102 #define HAS_CHROOT /**/
105 * This symbol, if defined, indicates that the chsize routine is available
106 * to truncate files. You might need a -lx to get this routine.
108 /*#define HAS_CHSIZE / **/
111 * This symbol, if defined, indicates that this C compiler knows about
112 * the const type. There is no need to actually test for that symbol
113 * within your programs. The mere use of the "const" keyword will
114 * trigger the necessary tests.
116 #define HASCONST /**/
122 * This symbol, if defined, indicates that the crypt routine is available
123 * to encrypt passwords and the like.
125 #define HAS_CRYPT /**/
128 * This symbol, if defined, indicates that the cuserid routine is
129 * available to get character login names.
131 #define HAS_CUSERID /**/
134 * This symbol, if defined, indicates that this system's <float.h>
135 * or <limits.h> defines the symbol DBL_DIG, which is the number
136 * of significant digits in a double precision number. If this
137 * symbol is not defined, a guess of 15 is usually pretty good.
139 #define HAS_DBL_DIG /* */
142 * This symbol, if defined, indicates that the difftime routine is
145 #define HAS_DIFFTIME /**/
148 * This symbol, if defined, indicates that the dlerror routine is
149 * available to return a string describing the last error that
150 * occurred from a call to dlopen(), dlclose() or dlsym().
152 #define HAS_DLERROR /**/
154 /* SETUID_SCRIPTS_ARE_SECURE_NOW:
155 * This symbol, if defined, indicates that the bug that prevents
156 * setuid scripts from being secure is not present in this kernel.
159 * This symbol, if defined, indicates that the C program should
160 * check the script that it is executing for setuid/setgid bits, and
161 * attempt to emulate setuid/setgid on systems that have disabled
162 * setuid #! scripts because the kernel can't do it securely.
163 * It is up to the package designer to make sure that this emulation
164 * is done securely. Among other things, it should do an fstat on
165 * the script it just opened to make sure it really is a setuid/setgid
166 * script, it should make sure the arguments passed correspond exactly
167 * to the argument on the #! line, and it should not trust any
168 * subprocesses to which it must pass the filename rather than the
169 * file descriptor of the script to be executed.
171 /*#define SETUID_SCRIPTS_ARE_SECURE_NOW / **/
172 /*#define DOSUID / **/
175 * This symbol, if defined, indicates that the dup2 routine is
176 * available to duplicate file descriptors.
178 #define HAS_DUP2 /**/
181 * This symbol, if defined, indicates that the fchmod routine is available
182 * to change mode of opened files. If unavailable, use chmod().
184 #define HAS_FCHMOD /**/
187 * This symbol, if defined, indicates that the fchown routine is available
188 * to change ownership of opened files. If unavailable, use chown().
190 #define HAS_FCHOWN /**/
193 * This symbol, if defined, indicates to the C program that
194 * the fcntl() function exists.
196 #define HAS_FCNTL /**/
199 * This symbol, if defined, indicates that the fgetpos routine is
200 * available to get the file position indicator, similar to ftell().
202 #define HAS_FGETPOS /**/
205 * This symbol, if defined, indicates that the system supports filenames
206 * longer than 14 characters.
208 #define FLEXFILENAMES /**/
211 * This symbol, if defined, indicates that the flock routine is
212 * available to do file locking.
214 #define HAS_FLOCK /**/
217 * This symbol, if defined, indicates that the fork routine is
220 #define HAS_FORK /**/
223 * This symbol, if defined, indicates that the fsetpos routine is
224 * available to set the file position indicator, similar to fseek().
226 #define HAS_FSETPOS /**/
229 * This symbol, if defined, indicates that the gettimeofday() system
230 * call is available for a sub-second accuracy clock. Usually, the file
231 * <sys/resource.h> needs to be included (see I_SYS_RESOURCE).
232 * The type "Timeval" should be used to refer to "struct timeval".
234 #define HAS_GETTIMEOFDAY /**/
235 #ifdef HAS_GETTIMEOFDAY
236 #define Timeval struct timeval /* Structure used by gettimeofday() */
240 * This symbol, if defined, indicates that the getgroups() routine is
241 * available to get the list of process groups. If unavailable, multiple
242 * groups are probably not supported.
244 #define HAS_GETGROUPS /**/
247 * This symbol, if defined, indicates that the C program may use the
248 * uname() routine to derive the host name. See also HAS_GETHOSTNAME
251 #define HAS_UNAME /**/
254 * This symbol, if defined, indicates that the getlogin routine is
255 * available to get the login name.
257 #define HAS_GETLOGIN /**/
260 * This symbol, if defined, indicates to the C program that
261 * the getpgid(pid) function is available to get the
264 #define HAS_GETPGID /**/
267 * This symbol, if defined, indicates that the getpgrp routine is
268 * available to get the current process group.
271 * This symbol, if defined, indicates that getpgrp needs one
272 * arguments whereas USG one needs none.
274 #define HAS_GETPGRP /**/
275 /*#define USE_BSD_GETPGRP / **/
278 * This symbol, if defined, indicates that the getpgrp2() (as in DG/UX)
279 * routine is available to get the current process group.
281 /*#define HAS_GETPGRP2 / **/
284 * This symbol, if defined, indicates that the getppid routine is
285 * available to get the parent process ID.
287 #define HAS_GETPPID /**/
290 * This symbol, if defined, indicates that the getpriority routine is
291 * available to get a process's priority.
293 #define HAS_GETPRIORITY /**/
296 * This symbol, if defined, indicates that the htonl() routine (and
297 * friends htons() ntohl() ntohs()) are available to do network
298 * order byte swapping.
301 * This symbol, if defined, indicates that the htons() routine (and
302 * friends htonl() ntohl() ntohs()) are available to do network
303 * order byte swapping.
306 * This symbol, if defined, indicates that the ntohl() routine (and
307 * friends htonl() htons() ntohs()) are available to do network
308 * order byte swapping.
311 * This symbol, if defined, indicates that the ntohs() routine (and
312 * friends htonl() htons() ntohl()) are available to do network
313 * order byte swapping.
315 #define HAS_HTONL /**/
316 #define HAS_HTONS /**/
317 #define HAS_NTOHL /**/
318 #define HAS_NTOHS /**/
321 * This symbol, if defined, indicates to the C program that the
322 * inet_aton() function is available to parse IP address "dotted-quad"
325 #define HAS_INET_ATON /**/
328 * This symbol, if defined, indicates that the killpg routine is available
329 * to kill process groups. If unavailable, you probably should use kill
330 * with a negative process number.
332 #define HAS_KILLPG /**/
335 * This symbol, if defined, indicates that the link routine is
336 * available to create hard links.
338 #define HAS_LINK /**/
341 * This symbol, if defined, indicates that the localeconv routine is
342 * available for numeric and monetary formatting conventions.
344 #define HAS_LOCALECONV /**/
347 * This symbol, if defined, indicates that the lockf routine is
348 * available to do file locking.
350 #define HAS_LOCKF /**/
353 * This symbol, if defined, indicates that the lstat routine is
354 * available to do file stats on symbolic links.
356 #define HAS_LSTAT /**/
359 * This symbol, if defined, indicates that the mblen routine is available
360 * to find the number of bytes in a multibye character.
362 #define HAS_MBLEN /**/
365 * This symbol, if defined, indicates that the mbstowcs routine is
366 * available to covert a multibyte string into a wide character string.
368 #define HAS_MBSTOWCS /**/
371 * This symbol, if defined, indicates that the mbtowc routine is available
372 * to covert a multibyte to a wide character.
374 #define HAS_MBTOWC /**/
377 * This symbol, if defined, indicates that the memcmp routine is available
378 * to compare blocks of memory.
380 #define HAS_MEMCMP /**/
383 * This symbol, if defined, indicates that the memcpy routine is available
384 * to copy blocks of memory.
386 #define HAS_MEMCPY /**/
389 * This symbol, if defined, indicates that the memmove routine is available
390 * to copy potentially overlapping blocks of memory. This should be used
391 * only when HAS_SAFE_BCOPY is not defined. If neither is there, roll your
394 #define HAS_MEMMOVE /**/
397 * This symbol, if defined, indicates that the memset routine is available
398 * to set blocks of memory.
400 #define HAS_MEMSET /**/
403 * This symbol, if defined, indicates that the mkdir routine is available
404 * to create directories. Otherwise you should fork off a new process to
407 #define HAS_MKDIR /**/
410 * This symbol, if defined, indicates that the mkfifo routine is
411 * available to create FIFOs. Otherwise, mknod should be able to
412 * do it for you. However, if mkfifo is there, mknod might require
413 * super-user privileges which mkfifo will not.
415 #define HAS_MKFIFO /**/
418 * This symbol, if defined, indicates that the mktime routine is
421 #define HAS_MKTIME /**/
424 * This symbol, if defined, indicates that the entire msg*(2) library is
425 * supported (IPC mechanism based on message queues).
430 * This symbol, if defined, indicates that the nice routine is
433 #define HAS_NICE /**/
436 * This symbol, if defined, indicates that pathconf() is available
437 * to determine file-system related limits and options associated
438 * with a given filename.
441 * This symbol, if defined, indicates that pathconf() is available
442 * to determine file-system related limits and options associated
443 * with a given open file descriptor.
445 #define HAS_PATHCONF /**/
446 #define HAS_FPATHCONF /**/
449 * This symbol, if defined, indicates that the pause routine is
450 * available to suspend a process until a signal is received.
452 #define HAS_PAUSE /**/
455 * This symbol, if defined, indicates that the pipe routine is
456 * available to create an inter-process channel.
458 #define HAS_PIPE /**/
461 * This symbol, if defined, indicates that the poll routine is
462 * available to poll active file descriptors. You may safely
463 * include <poll.h> when this symbol is defined.
465 #define HAS_POLL /**/
468 * This symbol, if defined, indicates that the readdir routine is
469 * available to read directory entries. You may have to include
470 * <dirent.h>. See I_DIRENT.
472 #define HAS_READDIR /**/
475 * This symbol, if defined, indicates that the seekdir routine is
476 * available. You may have to include <dirent.h>. See I_DIRENT.
478 #define HAS_SEEKDIR /**/
481 * This symbol, if defined, indicates that the telldir routine is
482 * available. You may have to include <dirent.h>. See I_DIRENT.
484 #define HAS_TELLDIR /**/
487 * This symbol, if defined, indicates that the rewinddir routine is
488 * available. You may have to include <dirent.h>. See I_DIRENT.
490 #define HAS_REWINDDIR /**/
493 * This symbol, if defined, indicates that the readlink routine is
494 * available to read the value of a symbolic link.
496 #define HAS_READLINK /**/
499 * This symbol, if defined, indicates that the rename routine is available
500 * to rename files. Otherwise you should do the unlink(), link(), unlink()
503 #define HAS_RENAME /**/
506 * This symbol, if defined, indicates that the rmdir routine is
507 * available to remove directories. Otherwise you should fork off a
508 * new process to exec /bin/rmdir.
510 #define HAS_RMDIR /**/
513 * This symbol, if defined, indicates that the select routine is
514 * available to select active file descriptors. If the timeout field
515 * is used, <sys/time.h> may need to be included.
517 #define HAS_SELECT /**/
520 * This symbol, if defined, indicates that the entire sem*(2) library is
526 * This symbol, if defined, indicates that the setegid routine is available
527 * to change the effective gid of the current program.
529 #define HAS_SETEGID /**/
532 * This symbol, if defined, indicates that the seteuid routine is available
533 * to change the effective uid of the current program.
535 #define HAS_SETEUID /**/
538 * This symbol, if defined, indicates that the setlinebuf routine is
539 * available to change stderr or stdout from block-buffered or unbuffered
540 * to a line-buffered mode.
542 #define HAS_SETLINEBUF /**/
545 * This symbol, if defined, indicates that the setlocale routine is
546 * available to handle locale-specific ctype implementations.
548 #define HAS_SETLOCALE /**/
551 * This symbol, if defined, indicates that the setpgid(pid, gpid)
552 * routine is available to set process group ID.
554 #define HAS_SETPGID /**/
557 * This symbol, if defined, indicates that the setpgrp routine is
558 * available to set the current process group.
561 * This symbol, if defined, indicates that setpgrp needs two
562 * arguments whereas USG one needs none. See also HAS_SETPGID
563 * for a POSIX interface.
565 #define HAS_SETPGRP /**/
566 /*#define USE_BSD_SETPGRP / **/
569 * This symbol, if defined, indicates that the setpgrp2() (as in DG/UX)
570 * routine is available to set the current process group.
572 /*#define HAS_SETPGRP2 / **/
575 * This symbol, if defined, indicates that the setpriority routine is
576 * available to set a process's priority.
578 #define HAS_SETPRIORITY /**/
581 * This symbol, if defined, indicates that the setregid routine is
582 * available to change the real and effective gid of the current
586 * This symbol, if defined, indicates that the setresgid routine is
587 * available to change the real, effective and saved gid of the current
590 #define HAS_SETREGID /**/
591 /*#define HAS_SETRESGID / **/
594 * This symbol, if defined, indicates that the setreuid routine is
595 * available to change the real and effective uid of the current
599 * This symbol, if defined, indicates that the setresuid routine is
600 * available to change the real, effective and saved uid of the current
603 #define HAS_SETREUID /**/
604 /*#define HAS_SETRESUID / **/
607 * This symbol, if defined, indicates that the setrgid routine is available
608 * to change the real gid of the current program.
610 /*#define HAS_SETRGID / **/
613 * This symbol, if defined, indicates that the setruid routine is available
614 * to change the real uid of the current program.
616 /*#define HAS_SETRUID / **/
619 * This symbol, if defined, indicates that the setsid routine is
620 * available to set the process group ID.
622 #define HAS_SETSID /**/
625 * This symbol, if defined, indicates that the entire shm*(2) library is
631 * This symbol holds the return type of the shmat() system call.
632 * Usually set to 'void *' or 'char *'.
634 /* HAS_SHMAT_PROTOTYPE:
635 * This symbol, if defined, indicates that the sys/shm.h includes
636 * a prototype for shmat(). Otherwise, it is up to the program to
637 * guess one. Shmat_t shmat _((int, Shmat_t, int)) is a good guess,
638 * but not always right so it should be emitted by the program only
639 * when HAS_SHMAT_PROTOTYPE is not defined to avoid conflicting defs.
641 #define Shmat_t void * /**/
642 #define HAS_SHMAT_PROTOTYPE /**/
645 * This symbol is defined if this system has a stat structure declaring
646 * st_blksize and st_blocks.
648 /*#define USE_STAT_BLOCKS / **/
651 * This symbol is defined to indicate that the strchr()/strrchr()
652 * functions are available for string searching. If not, try the
653 * index()/rindex() pair.
656 * This symbol is defined to indicate that the index()/rindex()
657 * functions are available for string searching.
659 #define HAS_STRCHR /**/
660 /*#define HAS_INDEX / **/
663 * This symbol, if defined, indicates that the strcoll routine is
664 * available to compare strings using collating information.
666 #define HAS_STRCOLL /**/
669 * This symbol, if defined, indicates that this C compiler knows how
670 * to copy structures. If undefined, you'll need to use a block copy
671 * routine of some sort instead.
673 #define USE_STRUCT_COPY /**/
676 * This symbol, if defined, indicates that the strerror routine is
677 * available to translate error numbers to strings. See the writeup
678 * of Strerror() in this file before you try to define your own.
681 * This symbol, if defined, indicates that the sys_errlist array is
682 * available to translate error numbers to strings. The extern int
683 * sys_nerr gives the size of that table.
686 * This preprocessor symbol is defined as a macro if strerror() is
687 * not available to translate error numbers to strings but sys_errlist[]
690 #define HAS_STRERROR /**/
691 #define HAS_SYS_ERRLIST /**/
692 #define Strerror(e) strerror(e)
695 * This symbol, if defined, indicates that the strtod routine is
696 * available to provide better numeric string conversion than atof().
698 #define HAS_STRTOD /**/
701 * This symbol, if defined, indicates that the strtol routine is available
702 * to provide better numeric string conversion than atoi() and friends.
704 #define HAS_STRTOL /**/
707 * This symbol, if defined, indicates that the strtoul routine is
708 * available to provide conversion of strings to unsigned long.
710 #define HAS_STRTOUL /**/
713 * This symbol, if defined, indicates that the strxfrm() routine is
714 * available to transform strings.
716 #define HAS_STRXFRM /**/
719 * This symbol, if defined, indicates that the symlink routine is available
720 * to create symbolic links.
722 #define HAS_SYMLINK /**/
725 * This symbol, if defined, indicates that the syscall routine is
726 * available to call arbitrary system calls. If undefined, that's tough.
728 #define HAS_SYSCALL /**/
731 * This symbol, if defined, indicates that sysconf() is available
732 * to determine system related limits and options.
734 #define HAS_SYSCONF /**/
737 * This symbol, if defined, indicates that the system routine is
738 * available to issue a shell command.
740 #define HAS_SYSTEM /**/
743 * This symbol, if defined, indicates that the tcgetpgrp routine is
744 * available to get foreground process group ID.
746 #define HAS_TCGETPGRP /**/
749 * This symbol, if defined, indicates that the tcsetpgrp routine is
750 * available to set foreground process group ID.
752 #define HAS_TCSETPGRP /**/
755 * This symbol, if defined, indicates that the truncate routine is
756 * available to truncate files.
758 #define HAS_TRUNCATE /**/
761 * This symbol, if defined, indicates that the tzname[] array is
762 * available to access timezone names.
764 #define HAS_TZNAME /**/
767 * This symbol, if defined, indicates that the umask routine is
768 * available to set and get the value of the file creation mask.
770 #define HAS_UMASK /**/
773 * This symbol, if defined, indicates that vfork() exists.
775 /*#define HAS_VFORK / **/
778 * This symbol, if defined, indicates that this C compiler knows about
779 * the volatile declaration.
781 #define HASVOLATILE /**/
787 * This symbol, if defined, indicates that wait4() exists.
789 #define HAS_WAIT4 /**/
792 * This symbol, if defined, indicates that the waitpid routine is
793 * available to wait for child process.
795 #define HAS_WAITPID /**/
798 * This symbol, if defined, indicates that the wcstombs routine is
799 * available to convert wide character strings to multibyte strings.
801 #define HAS_WCSTOMBS /**/
804 * This symbol, if defined, indicates that the wctomb routine is available
805 * to covert a wide character to a multibyte.
807 #define HAS_WCTOMB /**/
810 * This symbol, if defined, indicates that <dbm.h> exists and should
814 * This symbol, if defined, indicates that <rpcsvc/dbm.h> exists and
815 * should be included.
818 /*#define I_RPCSVC_DBM / **/
821 * This symbol, if defined, indicates to the C program that it should
822 * include <dirent.h>. Using this symbol also triggers the definition
823 * of the Direntry_t define which ends up being 'struct dirent' or
824 * 'struct direct' depending on the availability of <dirent.h>.
827 * This symbol, if defined, indicates to the C program that the length
828 * of directory entry names is provided by a d_namlen field. Otherwise
829 * you need to do strlen() on the d_name field.
832 * This symbol is set to 'struct direct' or 'struct dirent' depending on
833 * whether dirent is available or not. You should use this pseudo type to
834 * portably declare your directory entries.
836 #define I_DIRENT /**/
837 /*#define DIRNAMLEN / **/
838 #define Direntry_t struct dirent
841 * This symbol, if defined, indicates that <dlfcn.h> exists and should
847 * This manifest constant tells the C program to include <fcntl.h>.
849 /*#define I_FCNTL / **/
852 * This symbol, if defined, indicates to the C program that it should
853 * include <float.h> to get definition of symbols like DBL_MAX or
854 * DBL_MIN, i.e. machine dependent floating point values.
859 * This symbol, if defined, indicates to the C program that it should
865 * This symbol, if defined, indicates to the C program that it should
866 * include <limits.h> to get definition of symbols like WORD_BIT or
867 * LONG_MAX, i.e. machine dependant limitations.
869 #define I_LIMITS /**/
872 * This symbol, if defined, indicates to the C program that it should
873 * include <locale.h>.
875 #define I_LOCALE /**/
878 * This symbol, if defined, indicates to the C program that it should
884 * This symbol, if defined, indicates to the C program that it should
885 * include <memory.h>.
887 /*#define I_MEMORY / **/
890 * This symbol, if defined, indicates that <ndbm.h> exists and should
896 * This symbol, if defined, indicates that <net/errno.h> exists and
897 * should be included.
899 /*#define I_NET_ERRNO / **/
902 * This symbol, if defined, indicates to the C program that it should
903 * include <netinet/in.h>. Otherwise, you may try <sys/in.h>.
905 #define I_NETINET_IN /**/
908 * This symbol, if defined, indicates to the C program that it should
911 /*#define I_SFIO / **/
914 * This symbol, if defined, indicates that <stddef.h> exists and should
917 #define I_STDDEF /**/
920 * This symbol, if defined, indicates that <stdlib.h> exists and should
923 #define I_STDLIB /**/
926 * This symbol, if defined, indicates to the C program that it should
927 * include <string.h> (USG systems) instead of <strings.h> (BSD systems).
929 #define I_STRING /**/
932 * This symbol, if defined, indicates to the C program that it should
933 * include <sys/dir.h>.
935 #define I_SYS_DIR /**/
938 * This symbol, if defined, indicates to the C program that it should
939 * include <sys/file.h> to get definition of R_OK and friends.
941 #define I_SYS_FILE /**/
944 * This symbol, if defined, indicates that <sys/ioctl.h> exists and should
945 * be included. Otherwise, include <sgtty.h> or <termio.h>.
947 #define I_SYS_IOCTL /**/
950 * This symbol, if defined, indicates to the C program that it should
951 * include <sys/ndir.h>.
953 /*#define I_SYS_NDIR / **/
956 * This symbol, if defined, indicates to the C program that it should
957 * include <sys/param.h>.
959 #define I_SYS_PARAM /**/
962 * This symbol, if defined, indicates to the C program that it should
963 * include <sys/resource.h>.
965 #define I_SYS_RESOURCE /**/
968 * This symbol, if defined, indicates to the C program that it should
969 * include <sys/select.h> in order to get definition of struct timeval.
971 #define I_SYS_SELECT /**/
974 * This symbol, if defined, indicates to the C program that it should
975 * include <sys/stat.h>.
977 #define I_SYS_STAT /**/
980 * This symbol, if defined, indicates to the C program that it should
981 * include <sys/times.h>.
983 #define I_SYS_TIMES /**/
986 * This symbol, if defined, indicates to the C program that it should
987 * include <sys/types.h>.
989 #define I_SYS_TYPES /**/
992 * This symbol, if defined, indicates to the C program that it should
993 * include <sys/un.h> to get UNIX domain socket definitions.
995 #define I_SYS_UN /**/
998 * This symbol, if defined, indicates to the C program that it should
999 * include <sys/wait.h>.
1001 #define I_SYS_WAIT /**/
1004 * This symbol, if defined, indicates that the program should include
1005 * <termio.h> rather than <sgtty.h>. There are also differences in
1006 * the ioctl() calls that depend on the value of this symbol.
1009 * This symbol, if defined, indicates that the program should include
1010 * the POSIX termios.h rather than sgtty.h or termio.h.
1011 * There are also differences in the ioctl() calls that depend on the
1012 * value of this symbol.
1015 * This symbol, if defined, indicates that the program should include
1016 * <sgtty.h> rather than <termio.h>. There are also differences in
1017 * the ioctl() calls that depend on the value of this symbol.
1019 /*#define I_TERMIO / **/
1020 #define I_TERMIOS /**/
1021 /*#define I_SGTTY / **/
1024 * This symbol, if defined, indicates to the C program that it should
1025 * include <unistd.h>.
1027 #define I_UNISTD /**/
1030 * This symbol, if defined, indicates to the C program that it should
1031 * include <utime.h>.
1033 #define I_UTIME /**/
1036 * This symbol, if defined, indicates to the C program that it should
1037 * include <values.h> to get definition of symbols like MINFLOAT or
1038 * MAXLONG, i.e. machine dependant limitations. Probably, you
1039 * should use <limits.h> instead, if it is available.
1041 #define I_VALUES /**/
1044 * This symbol, if defined, indicates that <stdarg.h> exists and should
1048 * This symbol, if defined, indicates to the C program that it should
1049 * include <varargs.h>.
1051 #define I_STDARG /**/
1052 /*#define I_VARARGS / **/
1055 * This symbol, if defined, indicates to the C program that it should
1058 /*#define I_VFORK / **/
1061 * This variable contains the return type of free(). It is usually
1062 * void, but occasionally int.
1065 * This symbol is the type of pointer returned by malloc and realloc.
1067 #define Malloc_t void * /**/
1068 #define Free_t void /**/
1071 * This symbol, if defined, indicates that we're using our own malloc.
1073 /*#define MYMALLOC / **/
1076 * If defined, this macro indicates that the C compiler can handle
1077 * function prototypes.
1080 * This macro is used to declare function parameters for folks who want
1081 * to make declarations with prototypes using a different style than
1082 * the above macros. Use double parentheses. For example:
1084 * int main _((int argc, char *argv[]));
1086 #define CAN_PROTOTYPE /**/
1087 #ifdef CAN_PROTOTYPE
1088 #define _(args) args
1094 * This symbol contains the full pathname to the shell used on this
1095 * on this system to execute Bourne shell scripts. Usually, this will be
1096 * /bin/sh, though it's possible that some systems will have /bin/ksh,
1097 * /bin/pdksh, /bin/ash, /bin/bash, or even something such as
1100 #define SH_PATH "/bin/sh" /**/
1103 * This symbol is defined to be the type of char used in stdio.h.
1104 * It has the values "unsigned char" or "char".
1106 #define STDCHAR char /**/
1109 * This symbol indicates how much support of the void type is given by this
1110 * compiler. What various bits mean:
1112 * 1 = supports declaration of void
1113 * 2 = supports arrays of pointers to functions returning void
1114 * 4 = supports comparisons between pointers to void functions and
1115 * addresses of void functions
1116 * 8 = suports declaration of generic void pointers
1118 * The package designer should define VOIDUSED to indicate the requirements
1119 * of the package. This can be done either by #defining VOIDUSED before
1120 * including config.h, or by defining defvoidused in Myinit.U. If the
1121 * latter approach is taken, only those flags will be tested. If the
1122 * level of void support necessary is not present, defines void to int.
1127 #define VOIDFLAGS 15
1128 #if (VOIDFLAGS & VOIDUSED) != VOIDUSED
1129 #define void int /* is void to be avoided? */
1130 #define M_VOID /* Xenix strikes again */
1134 * This symbol contains the number of bytes required to align a
1135 * double. Usual values are 2, 4 and 8.
1136 * On NeXT starting with 3.2, you can build "Fat" Multiple Architecture
1137 * Binaries (MAB) for targets with varying alignment. This only matters
1138 * for perl, where the config.h can be generated and installed on one
1139 * system, and used by a different architecture to build an extension.
1140 * The default is eight, for safety.
1142 #define MEM_ALIGNBYTES 4 /**/
1145 * This symbol holds the hexadecimal constant defined in byteorder,
1146 * i.e. 0x1234 or 0x4321, etc...
1147 * On NeXT 3.2 (and greater), you can build "Fat" Multiple Architecture
1148 * Binaries (MAB) on either big endian or little endian machines.
1149 * The endian-ness is available at compile-time. This only matters
1150 * for perl, where the config.h can be generated and installed on
1151 * one system, and used by a different architecture to build an
1152 * extension. Older versions of NeXT that might not have
1153 * defined either *_ENDIAN__ were all on Motorola 680x0 series,
1154 * so the default case (for NeXT) is big endian to catch them.
1155 * This might matter for NeXT 3.0.
1158 #define BYTEORDER 0x1234 /* large digits for MSB */
1160 #ifdef __LITTLE_ENDIAN__
1161 #define BYTEORDER 0x1234
1162 #else /* __BIG_ENDIAN__ */
1163 #define BYTEORDER 0x4321
1164 #endif /* ENDIAN CHECK */
1168 * This symbol is defined if the C compiler can cast negative
1169 * or large floating point numbers to 32-bit ints.
1171 /*#define CASTI32 / **/
1174 * This symbol is defined if the C compiler can cast negative
1175 * numbers to unsigned longs, ints and shorts.
1178 * This symbol contains flags that say what difficulties the compiler
1179 * has casting odd floating values to unsigned long:
1181 * 1 = couldn't cast < 0
1182 * 2 = couldn't cast >= 0x80000000
1183 * 4 = couldn't cast in argument expression list
1185 #define CASTNEGFLOAT /**/
1186 #define CASTFLAGS 0 /**/
1189 * This symbol, if defined, indicates that the closedir() routine
1190 * does not return a value.
1192 /*#define VOID_CLOSEDIR / **/
1195 * This preprocessor macro is defined to convert a floating point
1196 * number to a string without a trailing decimal point. This
1197 * emulates the behavior of sprintf("%g"), but is sometimes much more
1198 * efficient. If gconvert() is not available, but gcvt() drops the
1199 * trailing decimal point, then gcvt() is used. If all else fails,
1200 * a macro using sprintf("%g") is used. Arguments for the Gconvert
1201 * macro are: value, number of digits, whether trailing zeros should
1202 * be retained, and the output buffer.
1203 * Possible values are:
1204 * d_Gconvert='gconvert((x),(n),(t),(b))'
1205 * d_Gconvert='gcvt((x),(n),(b))'
1206 * d_Gconvert='sprintf((b),"%.*g",(n),(x))'
1207 * The last two assume trailing zeros should not be kept.
1209 #define Gconvert(x,n,t,b) gcvt((x),(n),(b))
1212 * This symbol, if defined, indicates to the C program that
1213 * the GNU C library is being used.
1215 #define HAS_GNULIBC /**/
1217 * This manifest constant lets the C program know that isascii
1220 #define HAS_ISASCII /**/
1223 * This symbol, if defined, indicates that the lchown routine is
1224 * available to operate on a symbolic link (instead of following the
1227 /*#define HAS_LCHOWN / **/
1230 * This manifest constant lets the C program know that the three
1231 * argument form of open(2) is available.
1233 #define HAS_OPEN3 /**/
1236 * This symbol, if defined, indicates that the bcopy routine is available
1237 * to copy potentially overlapping memory blocks. Otherwise you should
1238 * probably use memmove() or memcpy(). If neither is defined, roll your
1241 #define HAS_SAFE_BCOPY /**/
1244 * This symbol, if defined, indicates that the memcpy routine is available
1245 * to copy potentially overlapping memory blocks. Otherwise you should
1246 * probably use memmove() or memcpy(). If neither is defined, roll your
1249 /*#define HAS_SAFE_MEMCPY / **/
1252 * This symbol, if defined, indicates that the memcmp routine is available
1253 * and can be used to compare relative magnitudes of chars with their high
1254 * bits set. If it is not defined, roll your own version.
1256 #define HAS_SANE_MEMCMP /**/
1259 * This symbol, if defined, indicates that Vr4's sigaction() routine
1262 #define HAS_SIGACTION /**/
1265 * This is the buffer type to be used with Sigsetjmp and Siglongjmp.
1268 * This macro is used in the same way as sigsetjmp(), but will invoke
1269 * traditional setjmp() if sigsetjmp isn't available.
1270 * See HAS_SIGSETJMP.
1273 * This macro is used in the same way as siglongjmp(), but will invoke
1274 * traditional longjmp() if siglongjmp isn't available.
1275 * See HAS_SIGSETJMP.
1277 #define HAS_SIGSETJMP /**/
1278 #ifdef HAS_SIGSETJMP
1279 #define Sigjmp_buf sigjmp_buf
1280 #define Sigsetjmp(buf,save_mask) sigsetjmp((buf),(save_mask))
1281 #define Siglongjmp(buf,retval) siglongjmp((buf),(retval))
1283 #define Sigjmp_buf jmp_buf
1284 #define Sigsetjmp(buf,save_mask) setjmp((buf))
1285 #define Siglongjmp(buf,retval) longjmp((buf),(retval))
1289 * This symbol is defined if the _ptr and _cnt fields (or similar)
1290 * of the stdio FILE structure can be used to access the stdio buffer
1291 * for a file handle. If this is defined, then the FILE_ptr(fp)
1292 * and FILE_cnt(fp) macros will also be defined and should be used
1293 * to access these fields.
1296 * This macro is used to access the _ptr field (or equivalent) of the
1297 * FILE structure pointed to by its argument. This macro will always be
1298 * defined if USE_STDIO_PTR is defined.
1300 /* STDIO_PTR_LVALUE:
1301 * This symbol is defined if the FILE_ptr macro can be used as an
1305 * This macro is used to access the _cnt field (or equivalent) of the
1306 * FILE structure pointed to by its argument. This macro will always be
1307 * defined if USE_STDIO_PTR is defined.
1309 /* STDIO_CNT_LVALUE:
1310 * This symbol is defined if the FILE_cnt macro can be used as an
1313 #define USE_STDIO_PTR /**/
1314 #ifdef USE_STDIO_PTR
1315 #define FILE_ptr(fp) ((fp)->_IO_read_ptr)
1316 #define STDIO_PTR_LVALUE /**/
1317 #define FILE_cnt(fp) ((fp)->_IO_read_end - (fp)->_IO_read_ptr)
1318 /*#define STDIO_CNT_LVALUE / **/
1322 * This symbol is defined if the _base field (or similar) of the
1323 * stdio FILE structure can be used to access the stdio buffer for
1324 * a file handle. If this is defined, then the FILE_base(fp) macro
1325 * will also be defined and should be used to access this field.
1326 * Also, the FILE_bufsiz(fp) macro will be defined and should be used
1327 * to determine the number of bytes in the buffer. USE_STDIO_BASE
1328 * will never be defined unless USE_STDIO_PTR is.
1331 * This macro is used to access the _base field (or equivalent) of the
1332 * FILE structure pointed to by its argument. This macro will always be
1333 * defined if USE_STDIO_BASE is defined.
1336 * This macro is used to determine the number of bytes in the I/O
1337 * buffer pointed to by _base field (or equivalent) of the FILE
1338 * structure pointed to its argument. This macro will always be defined
1339 * if USE_STDIO_BASE is defined.
1341 #define USE_STDIO_BASE /**/
1342 #ifdef USE_STDIO_BASE
1343 #define FILE_base(fp) ((fp)->_IO_read_base)
1344 #define FILE_bufsiz(fp) ((fp)->_IO_read_end - (fp)->_IO_read_base)
1348 * This symbol, if defined, indicates that the vprintf routine is available
1349 * to printf with a pointer to an argument list. If unavailable, you
1350 * may need to write your own, probably in terms of _doprnt().
1352 /* USE_CHAR_VSPRINTF:
1353 * This symbol is defined if this system has vsprintf() returning type
1354 * (char*). The trend seems to be to declare it as "int vsprintf()". It
1355 * is up to the package author to declare vsprintf correctly based on the
1358 #define HAS_VPRINTF /**/
1359 /*#define USE_CHAR_VSPRINTF / **/
1362 * This symbol contains the size of a double, so that the C preprocessor
1363 * can make decisions based on it.
1365 #define DOUBLESIZE 8 /**/
1368 * This symbol, if defined, indicates to the C program that it should
1372 * This symbol, if defined, indicates to the C program that it should
1373 * include <sys/time.h>.
1375 /* I_SYS_TIME_KERNEL:
1376 * This symbol, if defined, indicates to the C program that it should
1377 * include <sys/time.h> with KERNEL defined.
1379 /*#define I_TIME / **/
1380 #define I_SYS_TIME /**/
1381 /*#define I_SYS_TIME_KERNEL / **/
1384 * This symbol contains the value of sizeof(int) so that the C
1385 * preprocessor can make decisions based on it.
1388 * This symbol contains the value of sizeof(long) so that the C
1389 * preprocessor can make decisions based on it.
1392 * This symbol contains the value of sizeof(short) so that the C
1393 * preprocessor can make decisions based on it.
1395 #define INTSIZE 4 /**/
1396 #define LONGSIZE 4 /**/
1397 #define SHORTSIZE 2 /**/
1400 * This symbol is to be used during open() or fcntl(F_SETFL) to turn on
1401 * non-blocking I/O for the file descriptor. Note that there is no way
1402 * back, i.e. you cannot turn it blocking again this way. If you wish to
1403 * alternatively switch between blocking and non-blocking, use the
1404 * ioctl(FIOSNBIO) call instead, but that is not supported by all devices.
1407 * This symbol holds the errno error code set by read() when no data was
1408 * present on the non-blocking file descriptor.
1411 * This symbol holds the return code from read() when no data is present
1412 * on the non-blocking file descriptor. Be careful! If EOF_NONBLOCK is
1413 * not defined, then you can't distinguish between no data and EOF by
1414 * issuing a read(). You'll have to find another way to tell for sure!
1417 * This symbol, if defined, indicates to the C program that a read() on
1418 * a non-blocking file descriptor will return 0 on EOF, and not the value
1419 * held in RD_NODATA (-1 usually, in that case!).
1421 #define VAL_O_NONBLOCK O_NONBLOCK
1422 #define VAL_EAGAIN EAGAIN
1423 #define RD_NODATA -1
1424 #define EOF_NONBLOCK
1427 * This symbol contains the size of a pointer, so that the C preprocessor
1428 * can make decisions based on it. It will be sizeof(void *) if
1429 * the compiler supports (void *); otherwise it will be
1432 #define PTRSIZE 4 /**/
1435 * This symbol contains the number of bits of random number the rand()
1436 * function produces. Usual values are 15, 16, and 31.
1438 #define RANDBITS 31 /**/
1441 * This symbol holds the type used by functions that return
1442 * a count of bytes or an error condition. It must be a signed type.
1443 * It is usually ssize_t, but may be long or int, etc.
1444 * It may be necessary to include <sys/types.h> or <unistd.h>
1445 * to get any typedef'ed information.
1446 * We will pick a type such that sizeof(SSize_t) == sizeof(Size_t).
1448 #define SSize_t ssize_t /* signed count of bytes */
1451 * This symbol contains the name of the operating system, as determined
1452 * by Configure. You shouldn't rely on it too much; the specific
1453 * feature tests from Configure are generally more reliable.
1455 #define OSNAME "linux" /**/
1458 * This variable, if defined, holds the name of the directory in
1459 * which the user wants to put architecture-dependent public
1460 * library files for perl5. It is most often a local directory
1461 * such as /usr/local/lib. Programs using this variable must be
1462 * prepared to deal with filename expansion. If ARCHLIB is the
1463 * same as PRIVLIB, it is not defined, since presumably the
1464 * program already searches PRIVLIB.
1467 * This symbol contains the ~name expanded version of ARCHLIB, to be used
1468 * in programs that are not prepared to deal with ~ expansion at run-time.
1470 #define ARCHLIB "/opt/perl/lib/i686-linux-thread/5.00466" /**/
1471 #define ARCHLIB_EXP "/opt/perl/lib/i686-linux-thread/5.00466" /**/
1474 * This macro catenates 2 tokens together.
1477 * This macro surrounds its token with double quotes.
1480 #define CAT2(a,b)a/**/b
1481 #define STRINGIFY(a)"a"
1482 /* If you can get stringification with catify, tell me how! */
1485 #define CAT2(a,b)a ## b
1486 #define StGiFy(a)# a
1487 #define STRINGIFY(a)StGiFy(a)
1489 #if 42 != 1 && 42 != 42
1490 #include "Bletch: How does this C preprocessor catenate tokens?"
1494 * This symbol, if defined, contains the full pathname of csh.
1496 #define HAS_CSH /**/
1498 #define CSH "/bin/csh" /**/
1502 * This symbol, if defined, indicates that the endhostent() routine is
1503 * available to close whatever was being used for host queries.
1505 #define HAS_ENDHOSTENT /**/
1508 * This symbol, if defined, indicates that the endnetent() routine is
1509 * available to close whatever was being used for network queries.
1511 #define HAS_ENDNETENT /**/
1514 * This symbol, if defined, indicates that the endprotoent() routine is
1515 * available to close whatever was being used for protocol queries.
1517 #define HAS_ENDPROTOENT /**/
1520 * This symbol, if defined, indicates that the endservent() routine is
1521 * available to close whatever was being used for service queries.
1523 #define HAS_ENDSERVENT /**/
1525 /* HAS_GETHOSTBYADDR:
1526 * This symbol, if defined, indicates that the gethostbyaddr() routine is
1527 * available to look up hosts by their IP addresses.
1529 #define HAS_GETHOSTBYADDR /**/
1531 /* HAS_GETHOSTBYNAME:
1532 * This symbol, if defined, indicates that the gethostbyname() routine is
1533 * available to look up host names in some data base or other.
1535 #define HAS_GETHOSTBYNAME /**/
1538 * This symbol, if defined, indicates that the gethostent() routine is
1539 * available to look up host names in some data base or another.
1541 #define HAS_GETHOSTENT /**/
1543 /* HAS_GETNETBYADDR:
1544 * This symbol, if defined, indicates that the getnetbyaddr() routine is
1545 * available to look up networks by their IP addresses.
1547 #define HAS_GETNETBYADDR /**/
1549 /* HAS_GETNETBYNAME:
1550 * This symbol, if defined, indicates that the getnetbyname() routine is
1551 * available to look up networks by their names.
1553 #define HAS_GETNETBYNAME /**/
1556 * This symbol, if defined, indicates that the getnetent() routine is
1557 * available to look up network names in some data base or another.
1559 #define HAS_GETNETENT /**/
1562 * This symbol, if defined, indicates that the getprotoent() routine is
1563 * available to look up protocols in some data base or another.
1565 #define HAS_GETPROTOENT /**/
1567 /* HAS_GETPROTOBYNAME:
1568 * This symbol, if defined, indicates that the getprotobyname()
1569 * routine is available to look up protocols by their name.
1571 /* HAS_GETPROTOBYNUMBER:
1572 * This symbol, if defined, indicates that the getprotobynumber()
1573 * routine is available to look up protocols by their number.
1575 #define HAS_GETPROTOBYNAME /**/
1576 #define HAS_GETPROTOBYNUMBER /**/
1579 * This symbol, if defined, indicates that the getservent() routine is
1580 * available to look up network services in some data base or another.
1582 #define HAS_GETSERVENT /**/
1584 /* HAS_GETSERVBYNAME:
1585 * This symbol, if defined, indicates that the getservbyname()
1586 * routine is available to look up services by their name.
1588 /* HAS_GETSERVBYPORT:
1589 * This symbol, if defined, indicates that the getservbyport()
1590 * routine is available to look up services by their port.
1592 #define HAS_GETSERVBYNAME /**/
1593 #define HAS_GETSERVBYPORT /**/
1596 * This symbol will be defined if the C compiler supports long
1600 * This symbol contains the size of a long double, so that the
1601 * C preprocessor can make decisions based on it. It is only
1602 * defined if the system supports long doubles.
1604 #define HAS_LONG_DOUBLE /**/
1605 #ifdef HAS_LONG_DOUBLE
1606 #define LONG_DOUBLESIZE 12 /**/
1610 * This symbol will be defined if the C compiler supports
1614 * This symbol contains the size of a long long, so that the
1615 * C preprocessor can make decisions based on it. It is only
1616 * defined if the system supports long long.
1618 #define HAS_LONG_LONG /**/
1619 #ifdef HAS_LONG_LONG
1620 #define LONGLONGSIZE 8 /**/
1624 * This symbol, if defined, indicates that the setgroups() routine is
1625 * available to set the list of process groups. If unavailable, multiple
1626 * groups are probably not supported.
1628 #define HAS_SETGROUPS /**/
1631 * This symbol, if defined, indicates that the sethostent() routine is
1634 #define HAS_SETHOSTENT /**/
1637 * This symbol, if defined, indicates that the setnetent() routine is
1640 #define HAS_SETNETENT /**/
1643 * This symbol, if defined, indicates that the setprotoent() routine is
1646 #define HAS_SETPROTOENT /**/
1649 * This symbol, if defined, indicates that the setservent() routine is
1652 #define HAS_SETSERVENT /**/
1655 * This symbol, if defined, indicates that the setvbuf routine is
1656 * available to change buffering on an open stdio stream.
1657 * to a line-buffered mode.
1659 #define HAS_SETVBUF /**/
1662 * This symbol, if defined, indicates that the BSD socket interface is
1666 * This symbol, if defined, indicates that the BSD socketpair() call is
1669 #define HAS_SOCKET /**/
1670 #define HAS_SOCKETPAIR /**/
1673 * This symbol, if defined, indicates that the union semun is
1674 * defined by including <sys/sem.h>. If not, the user code
1675 * probably needs to define it as:
1678 * struct semid_ds *buf;
1679 * unsigned short *array;
1682 /* USE_SEMCTL_SEMUN:
1683 * This symbol, if defined, indicates that union semun is
1684 * used for semctl IPC_STAT.
1686 /* USE_SEMCTL_SEMID_DS:
1687 * This symbol, if defined, indicates that struct semid_ds * is
1688 * used for semctl IPC_STAT.
1690 #define HAS_UNION_SEMUN /**/
1691 #define USE_SEMCTL_SEMUN /**/
1692 #define USE_SEMCTL_SEMID_DS /**/
1695 * This symbol's value is either "void" or "int", corresponding to the
1696 * appropriate return type of a signal handler. Thus, you can declare
1697 * a signal handler using "Signal_t (*handler)()", and define the
1698 * handler using "Signal_t handler(sig)".
1700 #define Signal_t void /* Signal handler's return type */
1703 * This symbol holds the type used for the second argument to
1704 * getgroups() and setgropus(). Usually, this is the same as
1705 * gidtype (gid_t) , but sometimes it isn't.
1706 * It can be int, ushort, uid_t, etc...
1707 * It may be necessary to include <sys/types.h> to get any
1708 * typedef'ed information. This is only required if you have
1709 * getgroups() or setgropus()..
1711 #if defined(HAS_GETGROUPS) || defined(HAS_SETGROUPS)
1712 #define Groups_t gid_t /* Type for 2nd arg to [sg]etgroups() */
1716 * This symbol, if defined, indicates that <netdb.h> exists and
1717 * should be included.
1719 #define I_NETDB /**/
1722 * This symbol, if defined, indicates to the C program that it should
1726 * This symbol, if defined, indicates to the C program that struct passwd
1727 * contains pw_quota.
1730 * This symbol, if defined, indicates to the C program that struct passwd
1734 * This symbol, if defined, indicates to the C program that struct passwd
1735 * contains pw_change.
1738 * This symbol, if defined, indicates to the C program that struct passwd
1739 * contains pw_class.
1742 * This symbol, if defined, indicates to the C program that struct passwd
1743 * contains pw_expire.
1746 * This symbol, if defined, indicates to the C program that struct passwd
1747 * contains pw_comment.
1750 * This symbol, if defined, indicates to the C program that struct passwd
1751 * contains pw_gecos.
1754 /*#define PWQUOTA / **/
1755 /*#define PWAGE / **/
1756 /*#define PWCHANGE / **/
1757 /*#define PWCLASS / **/
1758 /*#define PWEXPIRE / **/
1759 /*#define PWCOMMENT / **/
1760 #define PWGECOS /**/
1763 * This symbol contains the name of the private library for this package.
1764 * The library is private in the sense that it needn't be in anyone's
1765 * execution path, but it should be accessible by the world. The program
1766 * should be prepared to do ~ expansion.
1769 * This symbol contains the ~name expanded version of PRIVLIB, to be used
1770 * in programs that are not prepared to deal with ~ expansion at run-time.
1772 #define PRIVLIB "/opt/perl/lib" /**/
1773 #define PRIVLIB_EXP "/opt/perl/lib" /**/
1776 * This symbol contains a list of signal names in order of
1777 * signal number. This is intended
1778 * to be used as a static array initialization, like this:
1779 * char *sig_name[] = { SIG_NAME };
1780 * The signals in the list are separated with commas, and each signal
1781 * is surrounded by double quotes. There is no leading SIG in the signal
1782 * name, i.e. SIGQUIT is known as "QUIT".
1783 * Gaps in the signal numbers (up to NSIG) are filled in with NUMnn,
1784 * etc., where nn is the actual signal number (e.g. NUM37).
1785 * The signal number for sig_name[i] is stored in sig_num[i].
1786 * The last element is 0 to terminate the list with a NULL. This
1787 * corresponds to the 0 at the end of the sig_num list.
1790 * This symbol contains a list of signal numbers, in the same order as the
1791 * SIG_NAME list. It is suitable for static array initialization, as in:
1792 * int sig_num[] = { SIG_NUM };
1793 * The signals in the list are separated with commas, and the indices
1794 * within that list and the SIG_NAME list match, so it's easy to compute
1795 * the signal name from a number or vice versa at the price of a small
1796 * dynamic linear lookup.
1797 * Duplicates are allowed, but are moved to the end of the list.
1798 * The signal number corresponding to sig_name[i] is sig_number[i].
1799 * if (i < NSIG) then sig_number[i] == i.
1800 * The last element is 0, corresponding to the 0 at the end of
1801 * the sig_name list.
1803 #define SIG_NAME "ZERO", "HUP", "INT", "QUIT", "ILL", "TRAP", "ABRT", "BUS", "FPE", "KILL", "USR1", "SEGV", "USR2", "PIPE", "ALRM", "TERM", "STKFLT", "CHLD", "CONT", "STOP", "TSTP", "TTIN", "TTOU", "URG", "XCPU", "XFSZ", "VTALRM", "PROF", "WINCH", "IO", "PWR", "UNUSED", "IOT", "CLD", "POLL", 0 /**/
1804 #define SIG_NUM 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 6, 17, 29, 0 /**/
1807 * This symbol contains the name of the private library for this package.
1808 * The library is private in the sense that it needn't be in anyone's
1809 * execution path, but it should be accessible by the world. The program
1810 * should be prepared to do ~ expansion.
1811 * The standard distribution will put nothing in this directory.
1812 * Individual sites may place their own extensions and modules in
1816 * This symbol contains the ~name expanded version of SITEARCH, to be used
1817 * in programs that are not prepared to deal with ~ expansion at run-time.
1819 #define SITEARCH "/opt/perl/lib/site_perl/i686-linux-thread" /**/
1820 #define SITEARCH_EXP "/opt/perl/lib/site_perl/i686-linux-thread" /**/
1823 * This symbol contains the name of the private library for this package.
1824 * The library is private in the sense that it needn't be in anyone's
1825 * execution path, but it should be accessible by the world. The program
1826 * should be prepared to do ~ expansion.
1827 * The standard distribution will put nothing in this directory.
1828 * Individual sites may place their own extensions and modules in
1832 * This symbol contains the ~name expanded version of SITELIB, to be used
1833 * in programs that are not prepared to deal with ~ expansion at run-time.
1835 #define SITELIB "/opt/perl/lib/site_perl" /**/
1836 #define SITELIB_EXP "/opt/perl/lib/site_perl" /**/
1838 /* DLSYM_NEEDS_UNDERSCORE:
1839 * This symbol, if defined, indicates that we need to prepend an
1840 * underscore to the symbol name before calling dlsym(). This only
1841 * makes sense if you *have* dlsym, which we will presume is the
1842 * case if you're using dl_dlopen.xs.
1844 /*#define DLSYM_NEEDS_UNDERSCORE / **/
1847 * This symbol, if defined, indicates that sfio should
1850 /*#define USE_SFIO / **/
1852 /* USE_DYNAMIC_LOADING:
1853 * This symbol, if defined, indicates that dynamic loading of
1854 * some sort is available.
1856 #define USE_DYNAMIC_LOADING /**/
1859 * This symbol contains the type of the prefix structure element
1860 * in the <db.h> header file. In older versions of DB, it was
1861 * int, while in newer ones it is u_int32_t.
1864 * This symbol contains the type of the prefix structure element
1865 * in the <db.h> header file. In older versions of DB, it was
1866 * int, while in newer ones it is size_t.
1868 #define DB_Hash_t u_int32_t /**/
1869 #define DB_Prefix_t size_t /**/
1872 * This variable contains the string to put in front of a perl
1873 * script to make sure (one hopes) that it runs with perl and not
1876 #define STARTPERL "#!/opt/perl/bin/perl" /**/
1879 * This symbol, if defined, indicates that the PerlIO abstraction should
1880 * be used throughout. If not defined, stdio should be
1881 * used in a fully backward compatible manner.
1883 /*#define USE_PERLIO / **/
1885 /* HAS_GETHOST_PROTOS:
1886 * This symbol, if defined, indicates that <netdb.h> includes
1887 * prototypes for gethostent(), gethostbyname(), and
1888 * gethostbyaddr(). Otherwise, it is up to the program to guess
1889 * them. See netdbtype.U for probing for various Netdb_xxx_t types.
1891 #define HAS_GETHOST_PROTOS /**/
1893 /* HAS_GETNET_PROTOS:
1894 * This symbol, if defined, indicates that <netdb.h> includes
1895 * prototypes for getnetent(), getnetbyname(), and
1896 * getnetbyaddr(). Otherwise, it is up to the program to guess
1897 * them. See netdbtype.U for probing for various Netdb_xxx_t types.
1899 #define HAS_GETNET_PROTOS /**/
1901 /* HAS_GETPROTO_PROTOS:
1902 * This symbol, if defined, indicates that <netdb.h> includes
1903 * prototypes for getprotoent(), getprotobyname(), and
1904 * getprotobyaddr(). Otherwise, it is up to the program to guess
1905 * them. See netdbtype.U for probing for various Netdb_xxx_t types.
1907 #define HAS_GETPROTO_PROTOS /**/
1909 /* HAS_GETSERV_PROTOS:
1910 * This symbol, if defined, indicates that <netdb.h> includes
1911 * prototypes for getservent(), getservbyname(), and
1912 * getservbyaddr(). Otherwise, it is up to the program to guess
1913 * them. See netdbtype.U for probing for various Netdb_xxx_t types.
1915 #define HAS_GETSERV_PROTOS /**/
1918 * This symbol holds the type used for the 1st argument
1919 * to gethostbyaddr().
1922 * This symbol holds the type used for the 2nd argument
1923 * to gethostbyaddr().
1926 * This symbol holds the type used for the argument to
1930 * This symbol holds the type used for the 1st argument to
1933 #define Netdb_host_t const char * /**/
1934 #define Netdb_hlen_t int /**/
1935 #define Netdb_name_t const char * /**/
1936 #define Netdb_net_t unsigned long /**/
1939 * This symbol holds the type used for the 2nd, 3rd, and 4th
1940 * arguments to select. Usually, this is 'fd_set *', if HAS_FD_SET
1941 * is defined, and 'int *' otherwise. This is only useful if you
1942 * have select(), of course.
1944 #define Select_fd_set_t fd_set * /**/
1947 * This symbol holds a string representing the architecture name.
1948 * It may be used to construct an architecture-dependant pathname
1949 * where library files may be held under a private library, for
1952 #define ARCHNAME "i686-linux-thread" /**/
1954 /* HAS_PTHREAD_YIELD:
1955 * This symbol, if defined, indicates that the pthread_yield
1956 * routine is available to yield the execution of the current
1960 * This symbol, if defined, indicates that the sched_yield
1961 * routine is available to yield the execution of the current
1964 /*#define HAS_PTHREAD_YIELD / **/
1965 #define HAS_SCHED_YIELD /**/
1967 /* PTHREADS_CREATED_JOINABLE:
1968 * This symbol, if defined, indicates that pthreads are created
1969 * in the joinable (aka undetached) state.
1971 #define PTHREADS_CREATED_JOINABLE /**/
1974 * This symbol, if defined, indicates that Perl should
1975 * be built to use threads.
1977 /* OLD_PTHREADS_API:
1978 * This symbol, if defined, indicates that Perl should
1979 * be built to use the old draft POSIX threads API.
1981 #define USE_THREADS /**/
1982 /*#define OLD_PTHREADS_API / **/
1985 * This symbol holds the type returned by time(). It can be long,
1986 * or time_t on BSD sites (in which case <sys/types.h> should be
1989 #define Time_t time_t /* Time type */
1992 * This symbol, if defined, indicates that the times() routine exists.
1993 * Note that this became obsolete on some systems (SUNOS), which now
1994 * use getrusage(). It may be necessary to include <sys/times.h>.
1996 #define HAS_TIMES /**/
1999 * This symbol holds the type used to declare file positions in libc.
2000 * It can be fpos_t, long, uint, etc... It may be necessary to include
2001 * <sys/types.h> to get any typedef'ed information.
2003 #define Fpos_t fpos_t /* File position type */
2006 * This symbol holds the return type of getgid() and the type of
2007 * argument to setrgid() and related functions. Typically,
2008 * it is the type of group ids in the kernel. It can be int, ushort,
2009 * uid_t, etc... It may be necessary to include <sys/types.h> to get
2010 * any typedef'ed information.
2012 #define Gid_t gid_t /* Type for getgid(), etc... */
2015 * This symbol holds the type used to declare offsets in the kernel.
2016 * It can be int, long, off_t, etc... It may be necessary to include
2017 * <sys/types.h> to get any typedef'ed information.
2019 #define Off_t off_t /* <offset> type */
2022 * This symbol holds the type used to declare file modes
2023 * for systems calls. It is usually mode_t, but may be
2024 * int or unsigned short. It may be necessary to include <sys/types.h>
2025 * to get any typedef'ed information.
2027 #define Mode_t mode_t /* file mode parameter for system calls */
2030 * This symbol holds the type used to declare process ids in the kernel.
2031 * It can be int, uint, pid_t, etc... It may be necessary to include
2032 * <sys/types.h> to get any typedef'ed information.
2034 #define Pid_t pid_t /* PID type */
2037 * This symbol holds the type used to declare length parameters
2038 * for string functions. It is usually size_t, but may be
2039 * unsigned long, int, etc. It may be necessary to include
2040 * <sys/types.h> to get any typedef'ed information.
2042 #define Size_t size_t /* length paramater for string functions */
2045 * This symbol holds the type used to declare user ids in the kernel.
2046 * It can be int, ushort, uid_t, etc... It may be necessary to include
2047 * <sys/types.h> to get any typedef'ed information.
2049 #define Uid_t uid_t /* UID type */