1 /* This file (config_H) is a sample config.h file. If you are unable
2 to successfully run Configure, copy this file to config.h and
3 edit it to suit your system.
6 * This file was produced by running the config_h.SH script, which
7 * gets its values from config.sh, which is generally produced by
10 * Feel free to modify any of this as the need arises. Note, however,
11 * that running config_h.SH again will wipe out any changes you've made.
12 * For a more permanent change edit config.sh and rerun config_h.SH.
14 * $Id: Config_h.U,v 3.0.1.5 1997/02/28 14:57:43 ram Exp $
18 * Package name : perl5
19 * Source directory : .
20 * Configuration time: Wed May 1 06:32:57 EET DST 2002
22 * Target system : osf1 alpha.hut.fi v4.0 878 alpha
29 * This symbol holds the complete pathname to the sed program.
31 #define LOC_SED "/usr/bin/sed" /**/
34 * This symbol, if defined, indicates that the alarm routine is
37 #define HAS_ALARM /**/
40 * This symbol indicates the C compiler can check for function attributes,
41 * such as printf formats. This is normally only supported by GNU cc.
43 /*#define HASATTRIBUTE / **/
45 #define __attribute__(_arg_)
49 * This symbol is defined if the bcmp() routine is available to
50 * compare blocks of memory.
55 * This symbol is defined if the bcopy() routine is available to
56 * copy blocks of memory.
58 #define HAS_BCOPY /**/
61 * This symbol is defined if the bzero() routine is available to
62 * set a memory block to 0.
64 #define HAS_BZERO /**/
67 * This symbol, if defined, indicates that the chown routine is
70 #define HAS_CHOWN /**/
73 * This symbol, if defined, indicates that the chroot routine is
76 #define HAS_CHROOT /**/
79 * This symbol, if defined, indicates that the chsize routine is available
80 * to truncate files. You might need a -lx to get this routine.
82 /*#define HAS_CHSIZE / **/
85 * This symbol, if defined, indicates that this C compiler knows about
86 * the const type. There is no need to actually test for that symbol
87 * within your programs. The mere use of the "const" keyword will
88 * trigger the necessary tests.
96 * This symbol, if defined, indicates that the cuserid routine is
97 * available to get character login names.
99 #define HAS_CUSERID /**/
102 * This symbol, if defined, indicates that this system's <float.h>
103 * or <limits.h> defines the symbol DBL_DIG, which is the number
104 * of significant digits in a double precision number. If this
105 * symbol is not defined, a guess of 15 is usually pretty good.
107 #define HAS_DBL_DIG /* */
110 * This symbol, if defined, indicates that the difftime routine is
113 #define HAS_DIFFTIME /**/
116 * This symbol, if defined, indicates that the dlerror routine is
117 * available to return a string describing the last error that
118 * occurred from a call to dlopen(), dlclose() or dlsym().
120 #define HAS_DLERROR /**/
123 * This symbol, if defined, indicates that the dup2 routine is
124 * available to duplicate file descriptors.
126 #define HAS_DUP2 /**/
129 * This symbol, if defined, indicates that the fchmod routine is available
130 * to change mode of opened files. If unavailable, use chmod().
132 #define HAS_FCHMOD /**/
135 * This symbol, if defined, indicates that the fchown routine is available
136 * to change ownership of opened files. If unavailable, use chown().
138 #define HAS_FCHOWN /**/
141 * This symbol, if defined, indicates to the C program that
142 * the fcntl() function exists.
144 #define HAS_FCNTL /**/
147 * This symbol, if defined, indicates that the fgetpos routine is
148 * available to get the file position indicator, similar to ftell().
150 #define HAS_FGETPOS /**/
153 * This symbol, if defined, indicates that the flock routine is
154 * available to do file locking.
156 #define HAS_FLOCK /**/
159 * This symbol, if defined, indicates that the fork routine is
162 #define HAS_FORK /**/
165 * This symbol, if defined, indicates that the fsetpos routine is
166 * available to set the file position indicator, similar to fseek().
168 #define HAS_FSETPOS /**/
171 * This symbol, if defined, indicates that the gettimeofday() system
172 * call is available for a sub-second accuracy clock. Usually, the file
173 * <sys/resource.h> needs to be included (see I_SYS_RESOURCE).
174 * The type "Timeval" should be used to refer to "struct timeval".
176 #define HAS_GETTIMEOFDAY /**/
177 #ifdef HAS_GETTIMEOFDAY
178 #define Timeval struct timeval /* Structure used by gettimeofday() */
182 * This symbol, if defined, indicates that the getgroups() routine is
183 * available to get the list of process groups. If unavailable, multiple
184 * groups are probably not supported.
186 #define HAS_GETGROUPS /**/
189 * This symbol, if defined, indicates that the getlogin routine is
190 * available to get the login name.
192 #define HAS_GETLOGIN /**/
195 * This symbol, if defined, indicates to the C program that
196 * the getpgid(pid) function is available to get the
199 #define HAS_GETPGID /**/
202 * This symbol, if defined, indicates that the getpgrp2() (as in DG/UX)
203 * routine is available to get the current process group.
205 /*#define HAS_GETPGRP2 / **/
208 * This symbol, if defined, indicates that the getppid routine is
209 * available to get the parent process ID.
211 #define HAS_GETPPID /**/
214 * This symbol, if defined, indicates that the getpriority routine is
215 * available to get a process's priority.
217 #define HAS_GETPRIORITY /**/
220 * This symbol, if defined, indicates to the C program that the
221 * inet_aton() function is available to parse IP address "dotted-quad"
224 #define HAS_INET_ATON /**/
227 * This symbol, if defined, indicates that the killpg routine is available
228 * to kill process groups. If unavailable, you probably should use kill
229 * with a negative process number.
231 #define HAS_KILLPG /**/
234 * This symbol, if defined, indicates that the link routine is
235 * available to create hard links.
237 #define HAS_LINK /**/
240 * This symbol, if defined, indicates that the localeconv routine is
241 * available for numeric and monetary formatting conventions.
243 #define HAS_LOCALECONV /**/
246 * This symbol, if defined, indicates that the lockf routine is
247 * available to do file locking.
249 #define HAS_LOCKF /**/
252 * This symbol, if defined, indicates that the lstat routine is
253 * available to do file stats on symbolic links.
255 #define HAS_LSTAT /**/
258 * This symbol, if defined, indicates that the mblen routine is available
259 * to find the number of bytes in a multibye character.
261 #define HAS_MBLEN /**/
264 * This symbol, if defined, indicates that the mbstowcs routine is
265 * available to covert a multibyte string into a wide character string.
267 #define HAS_MBSTOWCS /**/
270 * This symbol, if defined, indicates that the mbtowc routine is available
271 * to covert a multibyte to a wide character.
273 #define HAS_MBTOWC /**/
276 * This symbol, if defined, indicates that the memcmp routine is available
277 * to compare blocks of memory.
279 #define HAS_MEMCMP /**/
282 * This symbol, if defined, indicates that the memcpy routine is available
283 * to copy blocks of memory.
285 #define HAS_MEMCPY /**/
288 * This symbol, if defined, indicates that the memmove routine is available
289 * to copy potentially overlapping blocks of memory. This should be used
290 * only when HAS_SAFE_BCOPY is not defined. If neither is there, roll your
293 #define HAS_MEMMOVE /**/
296 * This symbol, if defined, indicates that the memset routine is available
297 * to set blocks of memory.
299 #define HAS_MEMSET /**/
302 * This symbol, if defined, indicates that the mkdir routine is available
303 * to create directories. Otherwise you should fork off a new process to
306 #define HAS_MKDIR /**/
309 * This symbol, if defined, indicates that the mkfifo routine is
310 * available to create FIFOs. Otherwise, mknod should be able to
311 * do it for you. However, if mkfifo is there, mknod might require
312 * super-user privileges which mkfifo will not.
314 #define HAS_MKFIFO /**/
317 * This symbol, if defined, indicates that the mktime routine is
320 #define HAS_MKTIME /**/
323 * This symbol, if defined, indicates that the msync system call is
324 * available to synchronize a mapped file.
326 #define HAS_MSYNC /**/
329 * This symbol, if defined, indicates that the munmap system call is
330 * available to unmap a region, usually mapped by mmap().
332 #define HAS_MUNMAP /**/
335 * This symbol, if defined, indicates that the nice routine is
338 #define HAS_NICE /**/
341 * This symbol, if defined, indicates that pathconf() is available
342 * to determine file-system related limits and options associated
343 * with a given filename.
346 * This symbol, if defined, indicates that pathconf() is available
347 * to determine file-system related limits and options associated
348 * with a given open file descriptor.
350 #define HAS_PATHCONF /**/
351 #define HAS_FPATHCONF /**/
354 * This symbol, if defined, indicates that the pause routine is
355 * available to suspend a process until a signal is received.
357 #define HAS_PAUSE /**/
360 * This symbol, if defined, indicates that the pipe routine is
361 * available to create an inter-process channel.
363 #define HAS_PIPE /**/
366 * This symbol, if defined, indicates that the poll routine is
367 * available to poll active file descriptors. You may safely
368 * include <poll.h> when this symbol is defined.
370 #define HAS_POLL /**/
373 * This symbol, if defined, indicates that the readdir routine is
374 * available to read directory entries. You may have to include
375 * <dirent.h>. See I_DIRENT.
377 #define HAS_READDIR /**/
380 * This symbol, if defined, indicates that the seekdir routine is
381 * available. You may have to include <dirent.h>. See I_DIRENT.
383 #define HAS_SEEKDIR /**/
386 * This symbol, if defined, indicates that the telldir routine is
387 * available. You may have to include <dirent.h>. See I_DIRENT.
389 #define HAS_TELLDIR /**/
392 * This symbol, if defined, indicates that the rewinddir routine is
393 * available. You may have to include <dirent.h>. See I_DIRENT.
395 #define HAS_REWINDDIR /**/
398 * This symbol, if defined, indicates that the readlink routine is
399 * available to read the value of a symbolic link.
401 #define HAS_READLINK /**/
404 * This symbol, if defined, indicates that the rename routine is available
405 * to rename files. Otherwise you should do the unlink(), link(), unlink()
408 #define HAS_RENAME /**/
411 * This symbol, if defined, indicates that the rmdir routine is
412 * available to remove directories. Otherwise you should fork off a
413 * new process to exec /bin/rmdir.
415 #define HAS_RMDIR /**/
418 * This symbol, if defined, indicates that the select routine is
419 * available to select active file descriptors. If the timeout field
420 * is used, <sys/time.h> may need to be included.
422 #define HAS_SELECT /**/
425 * This symbol, if defined, indicates that the setegid routine is available
426 * to change the effective gid of the current program.
428 #define HAS_SETEGID /**/
431 * This symbol, if defined, indicates that the seteuid routine is available
432 * to change the effective uid of the current program.
434 #define HAS_SETEUID /**/
437 * This symbol, if defined, indicates that the setlinebuf routine is
438 * available to change stderr or stdout from block-buffered or unbuffered
439 * to a line-buffered mode.
441 #define HAS_SETLINEBUF /**/
444 * This symbol, if defined, indicates that the setlocale routine is
445 * available to handle locale-specific ctype implementations.
447 #define HAS_SETLOCALE /**/
450 * This symbol, if defined, indicates that the setpgid(pid, gpid)
451 * routine is available to set process group ID.
453 #define HAS_SETPGID /**/
456 * This symbol, if defined, indicates that the setpgrp2() (as in DG/UX)
457 * routine is available to set the current process group.
459 /*#define HAS_SETPGRP2 / **/
462 * This symbol, if defined, indicates that the setpriority routine is
463 * available to set a process's priority.
465 #define HAS_SETPRIORITY /**/
468 * This symbol, if defined, indicates that the setregid routine is
469 * available to change the real and effective gid of the current
473 * This symbol, if defined, indicates that the setresgid routine is
474 * available to change the real, effective and saved gid of the current
477 #define HAS_SETREGID /**/
478 /*#define HAS_SETRESGID / **/
481 * This symbol, if defined, indicates that the setreuid routine is
482 * available to change the real and effective uid of the current
486 * This symbol, if defined, indicates that the setresuid routine is
487 * available to change the real, effective and saved uid of the current
490 #define HAS_SETREUID /**/
491 /*#define HAS_SETRESUID / **/
494 * This symbol, if defined, indicates that the setrgid routine is available
495 * to change the real gid of the current program.
497 #define HAS_SETRGID /**/
500 * This symbol, if defined, indicates that the setruid routine is available
501 * to change the real uid of the current program.
503 #define HAS_SETRUID /**/
506 * This symbol, if defined, indicates that the setsid routine is
507 * available to set the process group ID.
509 #define HAS_SETSID /**/
512 * This symbol is defined to indicate that the strchr()/strrchr()
513 * functions are available for string searching. If not, try the
514 * index()/rindex() pair.
517 * This symbol is defined to indicate that the index()/rindex()
518 * functions are available for string searching.
520 #define HAS_STRCHR /**/
521 /*#define HAS_INDEX / **/
524 * This symbol, if defined, indicates that the strcoll routine is
525 * available to compare strings using collating information.
527 #define HAS_STRCOLL /**/
530 * This symbol, if defined, indicates that this C compiler knows how
531 * to copy structures. If undefined, you'll need to use a block copy
532 * routine of some sort instead.
534 #define USE_STRUCT_COPY /**/
537 * This symbol, if defined, indicates that the strtod routine is
538 * available to provide better numeric string conversion than atof().
540 #define HAS_STRTOD /**/
543 * This symbol, if defined, indicates that the strtol routine is available
544 * to provide better numeric string conversion than atoi() and friends.
546 #define HAS_STRTOL /**/
549 * This symbol, if defined, indicates that the strxfrm() routine is
550 * available to transform strings.
552 #define HAS_STRXFRM /**/
555 * This symbol, if defined, indicates that the symlink routine is available
556 * to create symbolic links.
558 #define HAS_SYMLINK /**/
561 * This symbol, if defined, indicates that the syscall routine is
562 * available to call arbitrary system calls. If undefined, that's tough.
564 #define HAS_SYSCALL /**/
567 * This symbol, if defined, indicates that sysconf() is available
568 * to determine system related limits and options.
570 #define HAS_SYSCONF /**/
573 * This symbol, if defined, indicates that the system routine is
574 * available to issue a shell command.
576 #define HAS_SYSTEM /**/
579 * This symbol, if defined, indicates that the tcgetpgrp routine is
580 * available to get foreground process group ID.
582 #define HAS_TCGETPGRP /**/
585 * This symbol, if defined, indicates that the tcsetpgrp routine is
586 * available to set foreground process group ID.
588 #define HAS_TCSETPGRP /**/
591 * This symbol, if defined, indicates that the truncate routine is
592 * available to truncate files.
594 #define HAS_TRUNCATE /**/
597 * This symbol, if defined, indicates that the tzname[] array is
598 * available to access timezone names.
600 #define HAS_TZNAME /**/
603 * This symbol, if defined, indicates that the umask routine is
604 * available to set and get the value of the file creation mask.
606 #define HAS_UMASK /**/
609 * This symbol, if defined, indicates that the usleep routine is
610 * available to let the process sleep on a sub-second accuracy.
612 #define HAS_USLEEP /**/
615 * This symbol, if defined, indicates that this C compiler knows about
616 * the volatile declaration.
618 #define HASVOLATILE /**/
624 * This symbol, if defined, indicates that wait4() exists.
626 #define HAS_WAIT4 /**/
629 * This symbol, if defined, indicates that the waitpid routine is
630 * available to wait for child process.
632 #define HAS_WAITPID /**/
635 * This symbol, if defined, indicates that the wcstombs routine is
636 * available to convert wide character strings to multibyte strings.
638 #define HAS_WCSTOMBS /**/
641 * This symbol, if defined, indicates that the wctomb routine is available
642 * to covert a wide character to a multibyte.
644 #define HAS_WCTOMB /**/
647 * This symbol, if defined, indicates to the C program that it should
648 * include <arpa/inet.h> to get inet_addr and friends declarations.
650 #define I_ARPA_INET /**/
653 * This symbol, if defined, indicates that <dbm.h> exists and should
657 * This symbol, if defined, indicates that <rpcsvc/dbm.h> exists and
658 * should be included.
661 /*#define I_RPCSVC_DBM / **/
664 * This symbol, if defined, indicates to the C program that it should
665 * include <dirent.h>. Using this symbol also triggers the definition
666 * of the Direntry_t define which ends up being 'struct dirent' or
667 * 'struct direct' depending on the availability of <dirent.h>.
670 * This symbol, if defined, indicates to the C program that the length
671 * of directory entry names is provided by a d_namlen field. Otherwise
672 * you need to do strlen() on the d_name field.
675 * This symbol is set to 'struct direct' or 'struct dirent' depending on
676 * whether dirent is available or not. You should use this pseudo type to
677 * portably declare your directory entries.
679 #define I_DIRENT /**/
680 #define DIRNAMLEN /**/
681 #define Direntry_t struct dirent
684 * This symbol, if defined, indicates that <dlfcn.h> exists and should
690 * This manifest constant tells the C program to include <fcntl.h>.
692 /*#define I_FCNTL / **/
695 * This symbol, if defined, indicates to the C program that it should
696 * include <float.h> to get definition of symbols like DBL_MAX or
697 * DBL_MIN, i.e. machine dependent floating point values.
702 * This symbol, if defined, indicates to the C program that it should
703 * include <limits.h> to get definition of symbols like WORD_BIT or
704 * LONG_MAX, i.e. machine dependant limitations.
706 #define I_LIMITS /**/
709 * This symbol, if defined, indicates to the C program that it should
710 * include <locale.h>.
712 #define I_LOCALE /**/
715 * This symbol, if defined, indicates to the C program that it should
721 * This symbol, if defined, indicates to the C program that it should
722 * include <memory.h>.
724 /*#define I_MEMORY / **/
727 * This symbol, if defined, indicates that <net/errno.h> exists and
728 * should be included.
730 /*#define I_NET_ERRNO / **/
733 * This symbol, if defined, indicates to the C program that it should
734 * include <netinet/in.h>. Otherwise, you may try <sys/in.h>.
736 #define I_NETINET_IN /**/
739 * This symbol, if defined, indicates to the C program that it should
742 /*#define I_SFIO / **/
745 * This symbol, if defined, indicates that <stddef.h> exists and should
748 #define I_STDDEF /**/
751 * This symbol, if defined, indicates that <stdlib.h> exists and should
754 #define I_STDLIB /**/
757 * This symbol, if defined, indicates to the C program that it should
758 * include <string.h> (USG systems) instead of <strings.h> (BSD systems).
760 #define I_STRING /**/
763 * This symbol, if defined, indicates to the C program that it should
764 * include <sys/dir.h>.
766 #define I_SYS_DIR /**/
769 * This symbol, if defined, indicates to the C program that it should
770 * include <sys/file.h> to get definition of R_OK and friends.
772 #define I_SYS_FILE /**/
775 * This symbol, if defined, indicates that <sys/ioctl.h> exists and should
776 * be included. Otherwise, include <sgtty.h> or <termio.h>.
779 * This symbol, if defined, indicates the <sys/sockio.h> should be included
780 * to get socket ioctl options, like SIOCATMARK.
782 #define I_SYS_IOCTL /**/
783 /*#define I_SYS_SOCKIO / **/
786 * This symbol, if defined, indicates to the C program that it should
787 * include <sys/ndir.h>.
789 /*#define I_SYS_NDIR / **/
792 * This symbol, if defined, indicates to the C program that it should
793 * include <sys/param.h>.
795 #define I_SYS_PARAM /**/
798 * This symbol, if defined, indicates to the C program that it should
799 * include <sys/resource.h>.
801 #define I_SYS_RESOURCE /**/
804 * This symbol, if defined, indicates to the C program that it should
805 * include <sys/select.h> in order to get definition of struct timeval.
807 #define I_SYS_SELECT /**/
810 * This symbol, if defined, indicates to the C program that it should
811 * include <sys/stat.h>.
813 #define I_SYS_STAT /**/
816 * This symbol, if defined, indicates to the C program that it should
817 * include <sys/times.h>.
819 #define I_SYS_TIMES /**/
822 * This symbol, if defined, indicates to the C program that it should
823 * include <sys/types.h>.
825 #define I_SYS_TYPES /**/
828 * This symbol, if defined, indicates to the C program that it should
829 * include <sys/un.h> to get UNIX domain socket definitions.
831 #define I_SYS_UN /**/
834 * This symbol, if defined, indicates to the C program that it should
835 * include <sys/wait.h>.
837 #define I_SYS_WAIT /**/
840 * This symbol, if defined, indicates that the program should include
841 * <termio.h> rather than <sgtty.h>. There are also differences in
842 * the ioctl() calls that depend on the value of this symbol.
845 * This symbol, if defined, indicates that the program should include
846 * the POSIX termios.h rather than sgtty.h or termio.h.
847 * There are also differences in the ioctl() calls that depend on the
848 * value of this symbol.
851 * This symbol, if defined, indicates that the program should include
852 * <sgtty.h> rather than <termio.h>. There are also differences in
853 * the ioctl() calls that depend on the value of this symbol.
855 /*#define I_TERMIO / **/
856 #define I_TERMIOS /**/
857 /*#define I_SGTTY / **/
860 * This symbol, if defined, indicates to the C program that it should
861 * include <unistd.h>.
863 #define I_UNISTD /**/
866 * This symbol, if defined, indicates to the C program that it should
872 * This symbol, if defined, indicates to the C program that it should
873 * include <values.h> to get definition of symbols like MINFLOAT or
874 * MAXLONG, i.e. machine dependant limitations. Probably, you
875 * should use <limits.h> instead, if it is available.
877 #define I_VALUES /**/
880 * This symbol, if defined, indicates to the C program that it should
883 /*#define I_VFORK / **/
886 * This symbol contains the value of sizeof(int) so that the C
887 * preprocessor can make decisions based on it.
890 * This symbol contains the value of sizeof(long) so that the C
891 * preprocessor can make decisions based on it.
894 * This symbol contains the value of sizeof(short) so that the C
895 * preprocessor can make decisions based on it.
897 #define INTSIZE 4 /**/
898 #define LONGSIZE 8 /**/
899 #define SHORTSIZE 2 /**/
902 * This symbol, if defined, signifies that the build
903 * process will produce some binary files that are going to be
904 * used in a cross-platform environment. This is the case for
905 * example with the NeXT "fat" binaries that contain executables
908 /*#define MULTIARCH / **/
911 * This symbol, if defined, tells that there's a 64-bit integer type,
912 * Quad_t, and its unsigned counterpar, Uquad_t. QUADKIND will be one
913 * of QUAD_IS_INT, QUAD_IS_LONG, QUAD_IS_LONG_LONG, or QUAD_IS_INT64_T.
915 #define HAS_QUAD /**/
917 # define Quad_t long /**/
918 # define Uquad_t unsigned long /**/
919 # define QUADKIND 2 /**/
920 # define QUAD_IS_INT 1
921 # define QUAD_IS_LONG 2
922 # define QUAD_IS_LONG_LONG 3
923 # define QUAD_IS_INT64_T 4
927 * This symbol, if defined, indicates that the accessx routine is
928 * available to do extended access checks.
930 /*#define HAS_ACCESSX / **/
933 * This symbol, if defined, indicates that the eaccess routine is
934 * available to do extended access checks.
936 /*#define HAS_EACCESS / **/
939 * This symbol, if defined, indicates to the C program that it should
940 * include <sys/access.h>.
942 #define I_SYS_ACCESS /**/
945 * This symbol, if defined, indicates to the C program that it should
946 * include <sys/security.h>.
948 #define I_SYS_SECURITY /**/
951 * This symbol contains the name of the operating system, as determined
952 * by Configure. You shouldn't rely on it too much; the specific
953 * feature tests from Configure are generally more reliable.
956 * This symbol contains the version of the operating system, as determined
957 * by Configure. You shouldn't rely on it too much; the specific
958 * feature tests from Configure are generally more reliable.
960 #define OSNAME "dec_osf" /**/
961 #define OSVERS "4.0d" /**/
964 * This symbol contains the number of bytes required to align a
965 * double, or a long double when applicable. Usual values are 2,
966 * 4 and 8. The default is eight, for safety.
968 #if defined(USE_CROSS_COMPILE) || defined(MULTIARCH)
969 # define MEM_ALIGNBYTES 8
971 #define MEM_ALIGNBYTES 8
975 * This variable, if defined, holds the name of the directory in
976 * which the user wants to put architecture-dependent public
977 * library files for perl5. It is most often a local directory
978 * such as /usr/local/lib. Programs using this variable must be
979 * prepared to deal with filename expansion. If ARCHLIB is the
980 * same as PRIVLIB, it is not defined, since presumably the
981 * program already searches PRIVLIB.
984 * This symbol contains the ~name expanded version of ARCHLIB, to be used
985 * in programs that are not prepared to deal with ~ expansion at run-time.
987 #define ARCHLIB "/opt/perl/lib/5.7.3/alpha-dec_osf" /**/
988 #define ARCHLIB_EXP "/opt/perl/lib/5.7.3/alpha-dec_osf" /**/
991 * This symbol holds a string representing the architecture name.
992 * It may be used to construct an architecture-dependant pathname
993 * where library files may be held under a private library, for
996 #define ARCHNAME "alpha-dec_osf" /**/
999 * This symbol, if defined, indicates that the atolf routine is
1000 * available to convert strings into long doubles.
1002 /*#define HAS_ATOLF / **/
1005 * This symbol, if defined, indicates that the atoll routine is
1006 * available to convert strings into long longs.
1008 /*#define HAS_ATOLL / **/
1011 * This symbol holds the path of the bin directory where the package will
1012 * be installed. Program must be prepared to deal with ~name substitution.
1015 * This symbol is the filename expanded version of the BIN symbol, for
1016 * programs that do not want to deal with that at run-time.
1018 #define BIN "/opt/perl/bin" /**/
1019 #define BIN_EXP "/opt/perl/bin" /**/
1022 * This symbol holds the hexadecimal constant defined in byteorder,
1023 * in a UV, i.e. 0x1234 or 0x4321 or 0x12345678, etc...
1024 * If the compiler supports cross-compiling or multiple-architecture
1025 * binaries (eg. on NeXT systems), use compiler-defined macros to
1026 * determine the byte order.
1027 * On NeXT 3.2 (and greater), you can build "Fat" Multiple Architecture
1028 * Binaries (MAB) on either big endian or little endian machines.
1029 * The endian-ness is available at compile-time. This only matters
1030 * for perl, where the config.h can be generated and installed on
1031 * one system, and used by a different architecture to build an
1032 * extension. Older versions of NeXT that might not have
1033 * defined either *_ENDIAN__ were all on Motorola 680x0 series,
1034 * so the default case (for NeXT) is big endian to catch them.
1035 * This might matter for NeXT 3.0.
1037 #if defined(USE_CROSS_COMPILE) || defined(MULTIARCH)
1038 # ifdef __LITTLE_ENDIAN__
1040 # define BYTEORDER 0x1234
1043 # define BYTEORDER 0x12345678
1047 # ifdef __BIG_ENDIAN__
1049 # define BYTEORDER 0x4321
1052 # define BYTEORDER 0x87654321
1057 # if !defined(BYTEORDER) && (defined(NeXT) || defined(__NeXT__))
1058 # define BYTEORDER 0x4321
1061 #define BYTEORDER 0x12345678 /* large digits for MSB */
1065 * This macro catenates 2 tokens together.
1068 * This macro surrounds its token with double quotes.
1071 #define CAT2(a,b) a/**/b
1072 #define STRINGIFY(a) "a"
1073 /* If you can get stringification with catify, tell me how! */
1076 #define PeRl_CaTiFy(a, b) a ## b
1077 #define PeRl_StGiFy(a) #a
1078 /* the additional level of indirection enables these macros to be
1079 * used as arguments to other macros. See K&R 2nd ed., page 231. */
1080 #define CAT2(a,b) PeRl_CaTiFy(a,b)
1081 #define StGiFy(a) PeRl_StGiFy(a)
1082 #define STRINGIFY(a) PeRl_StGiFy(a)
1084 #if 42 != 1 && 42 != 42
1085 # include "Bletch: How does this C preprocessor catenate tokens?"
1089 * This symbol contains the first part of the string which will invoke
1090 * the C preprocessor on the standard input and produce to standard
1091 * output. Typical value of "cc -E" or "/lib/cpp", but it can also
1092 * call a wrapper. See CPPRUN.
1095 * This symbol contains the second part of the string which will invoke
1096 * the C preprocessor on the standard input and produce to standard
1097 * output. This symbol will have the value "-" if CPPSTDIN needs a minus
1098 * to specify standard input, otherwise the value is "".
1101 * This symbol contains the string which will invoke a C preprocessor on
1102 * the standard input and produce to standard output. It needs to end
1103 * with CPPLAST, after all other preprocessor flags have been specified.
1104 * The main difference with CPPSTDIN is that this program will never be a
1105 * pointer to a shell wrapper, i.e. it will be empty if no preprocessor is
1106 * available directly to the user. Note that it may well be different from
1107 * the preprocessor used to compile the C program.
1110 * This symbol is intended to be used along with CPPRUN in the same manner
1111 * symbol CPPMINUS is used with CPPSTDIN. It contains either "-" or "".
1113 #define CPPSTDIN "cppstdin"
1115 #define CPPRUN "/usr/bin/cpp"
1119 * This symbol, if defined, indicates that the _fwalk system call is
1120 * available to apply a function to all the file handles.
1122 /*#define HAS__FWALK / **/
1125 * This manifest constant lets the C program know that the access()
1126 * system call is available to check for accessibility using real UID/GID.
1127 * (always present on UNIX.)
1129 #define HAS_ACCESS /**/
1132 * This symbol, if defined, indicates that the asctime_r routine
1133 * is available to asctime re-entrantly.
1136 * This symbol encodes the prototype of asctime_r.
1138 /*#define HAS_ASCTIME_R / **/
1139 #define ASCTIME_R_PROTO 0 /**/
1142 * This symbol is defined if the C compiler can cast negative
1143 * or large floating point numbers to 32-bit ints.
1145 /*#define CASTI32 / **/
1148 * This symbol is defined if the C compiler can cast negative
1149 * numbers to unsigned longs, ints and shorts.
1152 * This symbol contains flags that say what difficulties the compiler
1153 * has casting odd floating values to unsigned long:
1155 * 1 = couldn't cast < 0
1156 * 2 = couldn't cast >= 0x80000000
1157 * 4 = couldn't cast in argument expression list
1159 #define CASTNEGFLOAT /**/
1160 #define CASTFLAGS 0 /**/
1163 * This symbol, if defined, indicates that the class routine is
1164 * available to classify doubles. Available for example in AIX.
1165 * The returned values are defined in <float.h> and are:
1167 * FP_PLUS_NORM Positive normalized, nonzero
1168 * FP_MINUS_NORM Negative normalized, nonzero
1169 * FP_PLUS_DENORM Positive denormalized, nonzero
1170 * FP_MINUS_DENORM Negative denormalized, nonzero
1172 * FP_MINUS_ZERO -0.0
1175 * FP_NANS Signaling Not a Number (NaNS)
1176 * FP_NANQ Quiet Not a Number (NaNQ)
1178 /*#define HAS_CLASS / **/
1181 * This symbol, if defined, indicates that the closedir() routine
1182 * does not return a value.
1184 /*#define VOID_CLOSEDIR / **/
1186 /* HAS_STRUCT_CMSGHDR:
1187 * This symbol, if defined, indicates that the struct cmsghdr
1190 #define HAS_STRUCT_CMSGHDR /**/
1193 * This symbol, if defined, indicates that the crypt_r routine
1194 * is available to crypt re-entrantly.
1197 * This symbol encodes the prototype of crypt_r.
1199 /*#define HAS_CRYPT_R / **/
1200 #define CRYPT_R_PROTO 0 /**/
1203 * This symbol, if defined, indicates that the C-shell exists.
1206 * This symbol, if defined, contains the full pathname of csh.
1208 #define HAS_CSH /**/
1210 #define CSH "/usr/bin/csh" /**/
1214 * This symbol, if defined, indicates that the ctime_r routine
1215 * is available to ctime re-entrantly.
1218 * This symbol encodes the prototype of ctime_r.
1220 /*#define HAS_CTIME_R / **/
1221 #define CTIME_R_PROTO 0 /**/
1223 /* DLSYM_NEEDS_UNDERSCORE:
1224 * This symbol, if defined, indicates that we need to prepend an
1225 * underscore to the symbol name before calling dlsym(). This only
1226 * makes sense if you *have* dlsym, which we will presume is the
1227 * case if you're using dl_dlopen.xs.
1229 /*#define DLSYM_NEEDS_UNDERSCORE / **/
1232 * This symbol, if defined, indicates that the drand48_r routine
1233 * is available to drand48 re-entrantly.
1236 * This symbol encodes the prototype of drand48_r.
1238 /*#define HAS_DRAND48_R / **/
1239 #define DRAND48_R_PROTO 0 /**/
1241 /* HAS_DRAND48_PROTO:
1242 * This symbol, if defined, indicates that the system provides
1243 * a prototype for the drand48() function. Otherwise, it is up
1244 * to the program to supply one. A good guess is
1245 * extern double drand48(void);
1247 #define HAS_DRAND48_PROTO /**/
1250 * This symbol, if defined, indicates that the getgrent routine is
1251 * available for finalizing sequential access of the group database.
1253 #define HAS_ENDGRENT /**/
1256 * This symbol, if defined, indicates that the endgrent_r routine
1257 * is available to endgrent re-entrantly.
1259 /* ENDGRENT_R_PROTO:
1260 * This symbol encodes the prototype of endgrent_r.
1262 /*#define HAS_ENDGRENT_R / **/
1263 #define ENDGRENT_R_PROTO 0 /**/
1266 * This symbol, if defined, indicates that the endhostent() routine is
1267 * available to close whatever was being used for host queries.
1269 #define HAS_ENDHOSTENT /**/
1272 * This symbol, if defined, indicates that the endnetent() routine is
1273 * available to close whatever was being used for network queries.
1275 #define HAS_ENDNETENT /**/
1278 * This symbol, if defined, indicates that the endprotoent() routine is
1279 * available to close whatever was being used for protocol queries.
1281 #define HAS_ENDPROTOENT /**/
1284 * This symbol, if defined, indicates that the getgrent routine is
1285 * available for finalizing sequential access of the passwd database.
1287 #define HAS_ENDPWENT /**/
1290 * This symbol, if defined, indicates that the endpwent_r routine
1291 * is available to endpwent re-entrantly.
1293 /* ENDPWENT_R_PROTO:
1294 * This symbol encodes the prototype of endpwent_r.
1296 /*#define HAS_ENDPWENT_R / **/
1297 #define ENDPWENT_R_PROTO 0 /**/
1300 * This symbol, if defined, indicates that the endservent() routine is
1301 * available to close whatever was being used for service queries.
1303 #define HAS_ENDSERVENT /**/
1306 * This symbol, if defined, indicates that the fchdir routine is
1307 * available to change directory using a file descriptor.
1309 #define HAS_FCHDIR /**/
1312 * This symbol, if defined, indicates that fcntl() can be used
1313 * for file locking. Normally on Unix systems this is defined.
1314 * It may be undefined on VMS.
1316 #define FCNTL_CAN_LOCK /**/
1319 * This symbol, when defined, indicates presence of the fd_set typedef
1322 #define HAS_FD_SET /**/
1325 * This symbol, if defined, indicates that the finite routine is
1326 * available to check whether a double is finite (non-infinity non-NaN).
1328 #define HAS_FINITE /**/
1331 * This symbol, if defined, indicates that the finitel routine is
1332 * available to check whether a long double is finite
1333 * (non-infinity non-NaN).
1335 #define HAS_FINITEL /**/
1338 * This symbol, if defined, indicates that the system supports filenames
1339 * longer than 14 characters.
1341 #define FLEXFILENAMES /**/
1344 * This symbol, if defined, indicates that the fp_class routine is
1345 * available to classify doubles. Available for example in Digital UNIX.
1346 * The returned values are defined in <math.h> and are:
1348 * FP_SNAN Signaling NaN (Not-a-Number)
1349 * FP_QNAN Quiet NaN (Not-a-Number)
1350 * FP_POS_INF +infinity
1351 * FP_NEG_INF -infinity
1352 * FP_POS_NORM Positive normalized
1353 * FP_NEG_NORM Negative normalized
1354 * FP_POS_DENORM Positive denormalized
1355 * FP_NEG_DENORM Negative denormalized
1356 * FP_POS_ZERO +0.0 (positive zero)
1357 * FP_NEG_ZERO -0.0 (negative zero)
1359 #define HAS_FP_CLASS /**/
1362 * This symbol, if defined, indicates that the fpclass routine is
1363 * available to classify doubles. Available for example in Solaris/SVR4.
1364 * The returned values are defined in <ieeefp.h> and are:
1366 * FP_SNAN signaling NaN
1368 * FP_NINF negative infinity
1369 * FP_PINF positive infinity
1370 * FP_NDENORM negative denormalized non-zero
1371 * FP_PDENORM positive denormalized non-zero
1372 * FP_NZERO negative zero
1373 * FP_PZERO positive zero
1374 * FP_NNORM negative normalized non-zero
1375 * FP_PNORM positive normalized non-zero
1377 /*#define HAS_FPCLASS / **/
1380 * This symbol, if defined, indicates that the fpclassify routine is
1381 * available to classify doubles. Available for example in HP-UX.
1382 * The returned values are defined in <math.h> and are
1384 * FP_NORMAL Normalized
1386 * FP_INFINITE Infinity
1387 * FP_SUBNORMAL Denormalized
1391 /*#define HAS_FPCLASSIFY / **/
1394 * This symbol will be defined if the C compiler supports fpos64_t.
1396 /*#define HAS_FPOS64_T / **/
1399 * This symbol, if defined, indicates that the frexpl routine is
1400 * available to break a long double floating-point number into
1401 * a normalized fraction and an integral power of 2.
1403 #define HAS_FREXPL /**/
1405 /* HAS_STRUCT_FS_DATA:
1406 * This symbol, if defined, indicates that the struct fs_data
1407 * to do statfs() is supported.
1409 /*#define HAS_STRUCT_FS_DATA / **/
1412 * This symbol, if defined, indicates that the fseeko routine is
1413 * available to fseek beyond 32 bits (useful for ILP32 hosts).
1415 /*#define HAS_FSEEKO / **/
1418 * This symbol, if defined, indicates that the fstatfs routine is
1419 * available to stat filesystems by file descriptors.
1421 #define HAS_FSTATFS /**/
1424 * This symbol, if defined, indicates that the fsync routine is
1425 * available to write a file's modified data and attributes to
1426 * permanent storage.
1428 #define HAS_FSYNC /**/
1431 * This symbol, if defined, indicates that the ftello routine is
1432 * available to ftell beyond 32 bits (useful for ILP32 hosts).
1434 /*#define HAS_FTELLO / **/
1437 * This preprocessor macro is defined to convert a floating point
1438 * number to a string without a trailing decimal point. This
1439 * emulates the behavior of sprintf("%g"), but is sometimes much more
1440 * efficient. If gconvert() is not available, but gcvt() drops the
1441 * trailing decimal point, then gcvt() is used. If all else fails,
1442 * a macro using sprintf("%g") is used. Arguments for the Gconvert
1443 * macro are: value, number of digits, whether trailing zeros should
1444 * be retained, and the output buffer.
1445 * The usual values are:
1446 * d_Gconvert='gconvert((x),(n),(t),(b))'
1447 * d_Gconvert='gcvt((x),(n),(b))'
1448 * d_Gconvert='sprintf((b),"%.*g",(n),(x))'
1449 * The last two assume trailing zeros should not be kept.
1451 #define Gconvert(x,n,t,b) sprintf((b),"%.*g",(n),(x))
1454 * This symbol, if defined, indicates that the getcwd routine is
1455 * available to get the current working directory.
1457 #define HAS_GETCWD /**/
1460 * This symbol, if defined, indicates that the getespwnam system call is
1461 * available to retrieve enchanced (shadow) password entries by name.
1463 /*#define HAS_GETESPWNAM / **/
1466 * This symbol, if defined, indicates that the getfsstat routine is
1467 * available to stat filesystems in bulk.
1469 #define HAS_GETFSSTAT /**/
1472 * This symbol, if defined, indicates that the getgrent routine is
1473 * available for sequential access of the group database.
1475 #define HAS_GETGRENT /**/
1478 * This symbol, if defined, indicates that the getgrent_r routine
1479 * is available to getgrent re-entrantly.
1481 /* GETGRENT_R_PROTO:
1482 * This symbol encodes the prototype of getgrent_r.
1484 /*#define HAS_GETGRENT_R / **/
1485 #define GETGRENT_R_PROTO 0 /**/
1488 * This symbol, if defined, indicates that the getgrgid_r routine
1489 * is available to getgrgid re-entrantly.
1491 /* GETGRGID_R_PROTO:
1492 * This symbol encodes the prototype of getgrgid_r.
1494 /*#define HAS_GETGRGID_R / **/
1495 #define GETGRGID_R_PROTO 0 /**/
1498 * This symbol, if defined, indicates that the getgrnam_r routine
1499 * is available to getgrnam re-entrantly.
1501 /* GETGRNAM_R_PROTO:
1502 * This symbol encodes the prototype of getgrnam_r.
1504 /*#define HAS_GETGRNAM_R / **/
1505 #define GETGRNAM_R_PROTO 0 /**/
1507 /* HAS_GETHOSTBYADDR:
1508 * This symbol, if defined, indicates that the gethostbyaddr() routine is
1509 * available to look up hosts by their IP addresses.
1511 #define HAS_GETHOSTBYADDR /**/
1513 /* HAS_GETHOSTBYNAME:
1514 * This symbol, if defined, indicates that the gethostbyname() routine is
1515 * available to look up host names in some data base or other.
1517 #define HAS_GETHOSTBYNAME /**/
1520 * This symbol, if defined, indicates that the gethostent() routine is
1521 * available to look up host names in some data base or another.
1523 #define HAS_GETHOSTENT /**/
1526 * This symbol, if defined, indicates that the C program may use the
1527 * gethostname() routine to derive the host name. See also HAS_UNAME
1531 * This symbol, if defined, indicates that the C program may use the
1532 * uname() routine to derive the host name. See also HAS_GETHOSTNAME
1536 * This symbol, if defined, indicates the command to feed to the
1537 * popen() routine to derive the host name. See also HAS_GETHOSTNAME
1538 * and HAS_UNAME. Note that the command uses a fully qualified path,
1539 * so that it is safe even if used by a process with super-user
1543 * This symbol, if defined, indicates that the C program may use the
1544 * contents of PHOSTNAME as a command to feed to the popen() routine
1545 * to derive the host name.
1547 #define HAS_GETHOSTNAME /**/
1548 #define HAS_UNAME /**/
1549 /*#define HAS_PHOSTNAME / **/
1550 #ifdef HAS_PHOSTNAME
1551 #define PHOSTNAME "" /* How to get the host name */
1554 /* HAS_GETHOST_PROTOS:
1555 * This symbol, if defined, indicates that <netdb.h> includes
1556 * prototypes for gethostent(), gethostbyname(), and
1557 * gethostbyaddr(). Otherwise, it is up to the program to guess
1558 * them. See netdbtype.U for probing for various Netdb_xxx_t types.
1560 #define HAS_GETHOST_PROTOS /**/
1563 * This symbol, if defined, indicates that the getitimer routine is
1564 * available to return interval timers.
1566 #define HAS_GETITIMER /**/
1569 * This symbol, if defined, indicates that the getlogin_r routine
1570 * is available to getlogin re-entrantly.
1572 /* GETLOGIN_R_PROTO:
1573 * This symbol encodes the prototype of getlogin_r.
1575 /*#define HAS_GETLOGIN_R / **/
1576 #define GETLOGIN_R_PROTO 0 /**/
1579 * This symbol, if defined, indicates that the getmnt routine is
1580 * available to get filesystem mount info by filename.
1582 /*#define HAS_GETMNT / **/
1585 * This symbol, if defined, indicates that the getmntent routine is
1586 * available to iterate through mounted file systems to get their info.
1588 /*#define HAS_GETMNTENT / **/
1590 /* HAS_GETNETBYADDR:
1591 * This symbol, if defined, indicates that the getnetbyaddr() routine is
1592 * available to look up networks by their IP addresses.
1594 #define HAS_GETNETBYADDR /**/
1596 /* HAS_GETNETBYNAME:
1597 * This symbol, if defined, indicates that the getnetbyname() routine is
1598 * available to look up networks by their names.
1600 #define HAS_GETNETBYNAME /**/
1603 * This symbol, if defined, indicates that the getnetent() routine is
1604 * available to look up network names in some data base or another.
1606 #define HAS_GETNETENT /**/
1608 /* HAS_GETNET_PROTOS:
1609 * This symbol, if defined, indicates that <netdb.h> includes
1610 * prototypes for getnetent(), getnetbyname(), and
1611 * getnetbyaddr(). Otherwise, it is up to the program to guess
1612 * them. See netdbtype.U for probing for various Netdb_xxx_t types.
1614 #define HAS_GETNET_PROTOS /**/
1617 * This symbol, if defined, indicates that the getpagesize system call
1618 * is available to get system page size, which is the granularity of
1619 * many memory management calls.
1621 #define HAS_GETPAGESIZE /**/
1624 * This symbol, if defined, indicates that the getprotoent() routine is
1625 * available to look up protocols in some data base or another.
1627 #define HAS_GETPROTOENT /**/
1630 * This symbol, if defined, indicates that the getpgrp routine is
1631 * available to get the current process group.
1634 * This symbol, if defined, indicates that getpgrp needs one
1635 * arguments whereas USG one needs none.
1637 #define HAS_GETPGRP /**/
1638 /*#define USE_BSD_GETPGRP / **/
1640 /* HAS_GETPROTOBYNAME:
1641 * This symbol, if defined, indicates that the getprotobyname()
1642 * routine is available to look up protocols by their name.
1644 /* HAS_GETPROTOBYNUMBER:
1645 * This symbol, if defined, indicates that the getprotobynumber()
1646 * routine is available to look up protocols by their number.
1648 #define HAS_GETPROTOBYNAME /**/
1649 #define HAS_GETPROTOBYNUMBER /**/
1651 /* HAS_GETPROTO_PROTOS:
1652 * This symbol, if defined, indicates that <netdb.h> includes
1653 * prototypes for getprotoent(), getprotobyname(), and
1654 * getprotobyaddr(). Otherwise, it is up to the program to guess
1655 * them. See netdbtype.U for probing for various Netdb_xxx_t types.
1657 #define HAS_GETPROTO_PROTOS /**/
1660 * This symbol, if defined, indicates that the getprpwnam system call is
1661 * available to retrieve protected (shadow) password entries by name.
1663 /*#define HAS_GETPRPWNAM / **/
1666 * This symbol, if defined, indicates that the getpwent routine is
1667 * available for sequential access of the passwd database.
1668 * If this is not available, the older getpw() function may be available.
1670 #define HAS_GETPWENT /**/
1673 * This symbol, if defined, indicates that the getpwent_r routine
1674 * is available to getpwent re-entrantly.
1676 /* GETPWENT_R_PROTO:
1677 * This symbol encodes the prototype of getpwent_r.
1679 /*#define HAS_GETPWENT_R / **/
1680 #define GETPWENT_R_PROTO 0 /**/
1683 * This symbol, if defined, indicates that the getpwnam_r routine
1684 * is available to getpwnam re-entrantly.
1686 /* GETPWNAM_R_PROTO:
1687 * This symbol encodes the prototype of getpwnam_r.
1689 /*#define HAS_GETPWNAM_R / **/
1690 #define GETPWNAM_R_PROTO 0 /**/
1693 * This symbol, if defined, indicates that the getpwuid_r routine
1694 * is available to getpwuid re-entrantly.
1696 /* GETPWUID_R_PROTO:
1697 * This symbol encodes the prototype of getpwuid_r.
1699 /*#define HAS_GETPWUID_R / **/
1700 #define GETPWUID_R_PROTO 0 /**/
1703 * This symbol, if defined, indicates that the getservent() routine is
1704 * available to look up network services in some data base or another.
1706 #define HAS_GETSERVENT /**/
1708 /* HAS_GETSERV_PROTOS:
1709 * This symbol, if defined, indicates that <netdb.h> includes
1710 * prototypes for getservent(), getservbyname(), and
1711 * getservbyaddr(). Otherwise, it is up to the program to guess
1712 * them. See netdbtype.U for probing for various Netdb_xxx_t types.
1714 #define HAS_GETSERV_PROTOS /**/
1717 * This symbol, if defined, indicates that the getspnam system call is
1718 * available to retrieve SysV shadow password entries by name.
1720 /*#define HAS_GETSPNAM / **/
1723 * This symbol, if defined, indicates that the getspnam_r routine
1724 * is available to getspnam re-entrantly.
1726 /* GETSPNAM_R_PROTO:
1727 * This symbol encodes the prototype of getspnam_r.
1729 /*#define HAS_GETSPNAM_R / **/
1730 #define GETSPNAM_R_PROTO 0 /**/
1732 /* HAS_GETSERVBYNAME:
1733 * This symbol, if defined, indicates that the getservbyname()
1734 * routine is available to look up services by their name.
1736 /* HAS_GETSERVBYPORT:
1737 * This symbol, if defined, indicates that the getservbyport()
1738 * routine is available to look up services by their port.
1740 #define HAS_GETSERVBYNAME /**/
1741 #define HAS_GETSERVBYPORT /**/
1744 * This symbol, if defined, indicates that the gmtime_r routine
1745 * is available to gmtime re-entrantly.
1748 * This symbol encodes the prototype of gmtime_r.
1750 /*#define HAS_GMTIME_R / **/
1751 #define GMTIME_R_PROTO 0 /**/
1754 * This symbol, if defined, indicates to the C program that
1755 * the GNU C library is being used.
1757 /*#define HAS_GNULIBC / **/
1758 #if defined(HAS_GNULIBC) && !defined(_GNU_SOURCE)
1759 # define _GNU_SOURCE
1762 * This symbol, if defined, indicates that the hasmntopt routine is
1763 * available to query the mount options of file systems.
1765 /*#define HAS_HASMNTOPT / **/
1768 * This symbol, if defined, indicates that the htonl() routine (and
1769 * friends htons() ntohl() ntohs()) are available to do network
1770 * order byte swapping.
1773 * This symbol, if defined, indicates that the htons() routine (and
1774 * friends htonl() ntohl() ntohs()) are available to do network
1775 * order byte swapping.
1778 * This symbol, if defined, indicates that the ntohl() routine (and
1779 * friends htonl() htons() ntohs()) are available to do network
1780 * order byte swapping.
1783 * This symbol, if defined, indicates that the ntohs() routine (and
1784 * friends htonl() htons() ntohl()) are available to do network
1785 * order byte swapping.
1787 #define HAS_HTONL /**/
1788 #define HAS_HTONS /**/
1789 #define HAS_NTOHL /**/
1790 #define HAS_NTOHS /**/
1793 * This symbol will defined if the C compiler supports int64_t.
1794 * Usually the <inttypes.h> needs to be included, but sometimes
1795 * <sys/types.h> is enough.
1797 /*#define HAS_INT64_T / **/
1800 * This manifest constant lets the C program know that isascii
1803 #define HAS_ISASCII /**/
1806 * This symbol, if defined, indicates that the isfinite routine is
1807 * available to check whether a double is finite (non-infinity non-NaN).
1809 /*#define HAS_ISFINITE / **/
1812 * This symbol, if defined, indicates that the isinf routine is
1813 * available to check whether a double is an infinity.
1815 /*#define HAS_ISINF / **/
1818 * This symbol, if defined, indicates that the isnan routine is
1819 * available to check whether a double is a NaN.
1821 #define HAS_ISNAN /**/
1824 * This symbol, if defined, indicates that the isnanl routine is
1825 * available to check whether a long double is a NaN.
1827 #define HAS_ISNANL /**/
1830 * This symbol, if defined, indicates that the lchown routine is
1831 * available to operate on a symbolic link (instead of following the
1834 #define HAS_LCHOWN /**/
1837 * This symbol, if defined, indicates that this system's <float.h>
1838 * or <limits.h> defines the symbol LDBL_DIG, which is the number
1839 * of significant digits in a long double precision number. Unlike
1840 * for DBL_DIG, there's no good guess for LDBL_DIG if it is undefined.
1842 #define HAS_LDBL_DIG /* */
1845 * This symbol, if defined, indicates that the localtime_r routine
1846 * is available to localtime re-entrantly.
1848 /* LOCALTIME_R_PROTO:
1849 * This symbol encodes the prototype of localtime_r.
1851 /*#define HAS_LOCALTIME_R / **/
1852 #define LOCALTIME_R_PROTO 0 /**/
1855 * This symbol will be defined if the C compiler supports long
1859 * This symbol contains the size of a long double, so that the
1860 * C preprocessor can make decisions based on it. It is only
1861 * defined if the system supports long doubles.
1863 #define HAS_LONG_DOUBLE /**/
1864 #ifdef HAS_LONG_DOUBLE
1865 #define LONG_DOUBLESIZE 8 /**/
1869 * This symbol will be defined if the C compiler supports long long.
1872 * This symbol contains the size of a long long, so that the
1873 * C preprocessor can make decisions based on it. It is only
1874 * defined if the system supports long long.
1876 #define HAS_LONG_LONG /**/
1877 #ifdef HAS_LONG_LONG
1878 #define LONGLONGSIZE 8 /**/
1882 * This symbol, if defined, indicates that the system provides
1883 * a prototype for the lseek() function. Otherwise, it is up
1884 * to the program to supply one. A good guess is
1885 * extern off_t lseek(int, off_t, int);
1887 #define HAS_LSEEK_PROTO /**/
1890 * This symbol, if defined, indicates that the madvise system call is
1891 * available to map a file into memory.
1893 #define HAS_MADVISE /**/
1896 * This symbol, if defined, indicates that the memchr routine is available
1897 * to locate characters within a C string.
1899 #define HAS_MEMCHR /**/
1902 * This symbol, if defined, indicates that the mkdtemp routine is
1903 * available to exclusively create a uniquely named temporary directory.
1905 /*#define HAS_MKDTEMP / **/
1908 * This symbol, if defined, indicates that the mkstemp routine is
1909 * available to exclusively create and open a uniquely named
1912 #define HAS_MKSTEMP /**/
1915 * This symbol, if defined, indicates that the mkstemps routine is
1916 * available to excluslvely create and open a uniquely named
1917 * (with a suffix) temporary file.
1919 /*#define HAS_MKSTEMPS / **/
1922 * This symbol, if defined, indicates that the mmap system call is
1923 * available to map a file into memory.
1926 * This symbol holds the return type of the mmap() system call
1927 * (and simultaneously the type of the first argument).
1928 * Usually set to 'void *' or 'cadd_t'.
1930 #define HAS_MMAP /**/
1931 #define Mmap_t void * /**/
1934 * This symbol, if defined, indicates that the modfl routine is
1935 * available to split a long double x into a fractional part f and
1936 * an integer part i such that |f| < 1.0 and (f + i) = x.
1938 /* HAS_MODFL_POW32_BUG:
1939 * This symbol, if defined, indicates that the modfl routine is
1940 * broken for long doubles >= pow(2, 32).
1941 * For example from 4294967303.150000 one would get 4294967302.000000
1942 * and 1.150000. The bug has been seen in certain versions of glibc,
1943 * release 2.2.2 is known to be okay.
1945 /*#define HAS_MODFL / **/
1946 /*#define HAS_MODFL_POW32_BUG / **/
1949 * This symbol, if defined, indicates that the mprotect system call is
1950 * available to modify the access protection of a memory mapped file.
1952 #define HAS_MPROTECT /**/
1955 * This symbol, if defined, indicates that the entire msg*(2) library is
1956 * supported (IPC mechanism based on message queues).
1958 #define HAS_MSG /**/
1960 /* HAS_STRUCT_MSGHDR:
1961 * This symbol, if defined, indicates that the struct msghdr
1964 #define HAS_STRUCT_MSGHDR /**/
1967 * This symbol will be defined if the C compiler supports off64_t.
1969 /*#define HAS_OFF64_T / **/
1972 * This manifest constant lets the C program know that the three
1973 * argument form of open(2) is available.
1975 #define HAS_OPEN3 /**/
1977 /* OLD_PTHREAD_CREATE_JOINABLE:
1978 * This symbol, if defined, indicates how to create pthread
1979 * in joinable (aka undetached) state. NOTE: not defined
1980 * if pthread.h already has defined PTHREAD_CREATE_JOINABLE
1981 * (the new version of the constant).
1982 * If defined, known values are PTHREAD_CREATE_UNDETACHED
1985 /*#define OLD_PTHREAD_CREATE_JOINABLE / **/
1987 /* HAS_PTHREAD_YIELD:
1988 * This symbol, if defined, indicates that the pthread_yield
1989 * routine is available to yield the execution of the current
1990 * thread. sched_yield is preferable to pthread_yield.
1993 * This symbol defines the way to yield the execution of
1994 * the current thread. Known ways are sched_yield,
1995 * pthread_yield, and pthread_yield with NULL.
1998 * This symbol, if defined, indicates that the sched_yield
1999 * routine is available to yield the execution of the current
2000 * thread. sched_yield is preferable to pthread_yield.
2002 /*#define HAS_PTHREAD_YIELD / **/
2003 #define SCHED_YIELD sched_yield() /**/
2004 #define HAS_SCHED_YIELD /**/
2007 * This symbol, if defined, indicates that the random_r routine
2008 * is available to random re-entrantly.
2011 * This symbol encodes the prototype of random_r.
2013 /*#define HAS_RANDOM_R / **/
2014 #define RANDOM_R_PROTO 0 /**/
2017 * This symbol, if defined, indicates that the readdir_r routine
2018 * is available to readdir re-entrantly.
2021 * This symbol encodes the prototype of readdir_r.
2023 /*#define HAS_READDIR_R / **/
2024 #define READDIR_R_PROTO 0 /**/
2027 * This symbol, if defined, indicates that the readv routine is
2028 * available to do gather reads. You will also need <sys/uio.h>
2029 * and there I_SYSUIO.
2031 #define HAS_READV /**/
2034 * This symbol, if defined, indicates that the recvmsg routine is
2035 * available to send structured socket messages.
2037 #define HAS_RECVMSG /**/
2040 * This symbol, if defined, indicates that the bcopy routine is available
2041 * to copy potentially overlapping memory blocks. Normally, you should
2042 * probably use memmove() or memcpy(). If neither is defined, roll your
2045 /*#define HAS_SAFE_BCOPY / **/
2048 * This symbol, if defined, indicates that the memcpy routine is available
2049 * to copy potentially overlapping memory blocks. If you need to
2050 * copy overlapping memory blocks, you should check HAS_MEMMOVE and
2051 * use memmove() instead, if available.
2053 /*#define HAS_SAFE_MEMCPY / **/
2056 * This symbol, if defined, indicates that the memcmp routine is available
2057 * and can be used to compare relative magnitudes of chars with their high
2058 * bits set. If it is not defined, roll your own version.
2060 #define HAS_SANE_MEMCMP /**/
2063 * This symbol, if defined, indicates that the system provides
2064 * a prototype for the sbrk() function. Otherwise, it is up
2065 * to the program to supply one. Good guesses are
2066 * extern void* sbrk(int);
2067 * extern void* sbrk(size_t);
2069 #define HAS_SBRK_PROTO /**/
2072 * This symbol, if defined, indicates that the entire sem*(2) library is
2075 #define HAS_SEM /**/
2078 * This symbol, if defined, indicates that the sendmsg routine is
2079 * available to send structured socket messages.
2081 #define HAS_SENDMSG /**/
2084 * This symbol, if defined, indicates that the setgrent routine is
2085 * available for initializing sequential access of the group database.
2087 #define HAS_SETGRENT /**/
2090 * This symbol, if defined, indicates that the setgrent_r routine
2091 * is available to setgrent re-entrantly.
2093 /* SETGRENT_R_PROTO:
2094 * This symbol encodes the prototype of setgrent_r.
2096 /*#define HAS_SETGRENT_R / **/
2097 #define SETGRENT_R_PROTO 0 /**/
2100 * This symbol, if defined, indicates that the setgroups() routine is
2101 * available to set the list of process groups. If unavailable, multiple
2102 * groups are probably not supported.
2104 #define HAS_SETGROUPS /**/
2107 * This symbol, if defined, indicates that the sethostent() routine is
2110 #define HAS_SETHOSTENT /**/
2113 * This symbol, if defined, indicates that the setitimer routine is
2114 * available to set interval timers.
2116 #define HAS_SETITIMER /**/
2119 * This symbol, if defined, indicates that the setnetent() routine is
2122 #define HAS_SETNETENT /**/
2125 * This symbol, if defined, indicates that the setprotoent() routine is
2128 #define HAS_SETPROTOENT /**/
2131 * This symbol, if defined, indicates that the setpgrp routine is
2132 * available to set the current process group.
2135 * This symbol, if defined, indicates that setpgrp needs two
2136 * arguments whereas USG one needs none. See also HAS_SETPGID
2137 * for a POSIX interface.
2139 #define HAS_SETPGRP /**/
2140 #define USE_BSD_SETPGRP /**/
2142 /* HAS_SETPROCTITLE:
2143 * This symbol, if defined, indicates that the setproctitle routine is
2144 * available to set process title.
2146 /*#define HAS_SETPROCTITLE / **/
2149 * This symbol, if defined, indicates that the setpwent routine is
2150 * available for initializing sequential access of the passwd database.
2152 #define HAS_SETPWENT /**/
2155 * This symbol, if defined, indicates that the setpwent_r routine
2156 * is available to setpwent re-entrantly.
2158 /* SETPWENT_R_PROTO:
2159 * This symbol encodes the prototype of setpwent_r.
2161 /*#define HAS_SETPWENT_R / **/
2162 #define SETPWENT_R_PROTO 0 /**/
2165 * This symbol, if defined, indicates that the setservent() routine is
2168 #define HAS_SETSERVENT /**/
2171 * This symbol, if defined, indicates that the setvbuf routine is
2172 * available to change buffering on an open stdio stream.
2173 * to a line-buffered mode.
2175 #define HAS_SETVBUF /**/
2178 * This symbol, if defined, indicates that sfio should
2181 /*#define USE_SFIO / **/
2184 * This symbol, if defined, indicates that the entire shm*(2) library is
2187 #define HAS_SHM /**/
2190 * This symbol, if defined, indicates that Vr4's sigaction() routine
2193 #define HAS_SIGACTION /**/
2196 * This variable indicates to the C program that the sigsetjmp()
2197 * routine is available to save the calling process's registers
2198 * and stack environment for later use by siglongjmp(), and
2199 * to optionally save the process's signal mask. See
2200 * Sigjmp_buf, Sigsetjmp, and Siglongjmp.
2203 * This is the buffer type to be used with Sigsetjmp and Siglongjmp.
2206 * This macro is used in the same way as sigsetjmp(), but will invoke
2207 * traditional setjmp() if sigsetjmp isn't available.
2208 * See HAS_SIGSETJMP.
2211 * This macro is used in the same way as siglongjmp(), but will invoke
2212 * traditional longjmp() if siglongjmp isn't available.
2213 * See HAS_SIGSETJMP.
2215 #define HAS_SIGSETJMP /**/
2216 #ifdef HAS_SIGSETJMP
2217 #define Sigjmp_buf sigjmp_buf
2218 #define Sigsetjmp(buf,save_mask) sigsetjmp((buf),(save_mask))
2219 #define Siglongjmp(buf,retval) siglongjmp((buf),(retval))
2221 #define Sigjmp_buf jmp_buf
2222 #define Sigsetjmp(buf,save_mask) setjmp((buf))
2223 #define Siglongjmp(buf,retval) longjmp((buf),(retval))
2227 * This symbol, if defined, indicates that the BSD socket interface is
2231 * This symbol, if defined, indicates that the BSD socketpair() call is
2235 * This symbol, if defined, indicates that the MSG_CTRUNC is supported.
2236 * Checking just with #ifdef might not be enough because this symbol
2237 * has been known to be an enum.
2239 /* HAS_MSG_DONTROUTE:
2240 * This symbol, if defined, indicates that the MSG_DONTROUTE is supported.
2241 * Checking just with #ifdef might not be enough because this symbol
2242 * has been known to be an enum.
2245 * This symbol, if defined, indicates that the MSG_OOB is supported.
2246 * Checking just with #ifdef might not be enough because this symbol
2247 * has been known to be an enum.
2250 * This symbol, if defined, indicates that the MSG_PEEK is supported.
2251 * Checking just with #ifdef might not be enough because this symbol
2252 * has been known to be an enum.
2255 * This symbol, if defined, indicates that the MSG_PROXY is supported.
2256 * Checking just with #ifdef might not be enough because this symbol
2257 * has been known to be an enum.
2260 * This symbol, if defined, indicates that the SCM_RIGHTS is supported.
2261 * Checking just with #ifdef might not be enough because this symbol
2262 * has been known to be an enum.
2264 #define HAS_SOCKET /**/
2265 #define HAS_SOCKETPAIR /**/
2266 #define HAS_MSG_CTRUNC /**/
2267 #define HAS_MSG_DONTROUTE /**/
2268 #define HAS_MSG_OOB /**/
2269 #define HAS_MSG_PEEK /**/
2270 /*#define HAS_MSG_PROXY / **/
2271 #define HAS_SCM_RIGHTS /**/
2274 * This symbol, if defined, indicates that the socks5_init routine is
2275 * available to initialize SOCKS 5.
2277 /*#define HAS_SOCKS5_INIT / **/
2280 * This symbol, if defined, indicates that the sqrtl routine is
2281 * available to do long double square roots.
2283 #define HAS_SQRTL /**/
2286 * This symbol, if defined, indicates that the srand48_r routine
2287 * is available to srand48 re-entrantly.
2290 * This symbol encodes the prototype of srand48_r.
2292 /*#define HAS_SRAND48_R / **/
2293 #define SRAND48_R_PROTO 0 /**/
2296 * This symbol, if defined, indicates that the srandom_r routine
2297 * is available to srandom re-entrantly.
2300 * This symbol encodes the prototype of srandom_r.
2302 /*#define HAS_SRANDOM_R / **/
2303 #define SRANDOM_R_PROTO 0 /**/
2306 * This symbol is defined if this system has a stat structure declaring
2307 * st_blksize and st_blocks.
2309 #ifndef USE_STAT_BLOCKS
2310 #define USE_STAT_BLOCKS /**/
2313 /* HAS_STRUCT_STATFS_F_FLAGS:
2314 * This symbol, if defined, indicates that the struct statfs
2315 * does have the f_flags member containing the mount flags of
2316 * the filesystem containing the file.
2317 * This kind of struct statfs is coming from <sys/mount.h> (BSD 4.3),
2318 * not from <sys/statfs.h> (SYSV). Older BSDs (like Ultrix) do not
2319 * have statfs() and struct statfs, they have ustat() and getmnt()
2320 * with struct ustat and struct fs_data.
2322 #define HAS_STRUCT_STATFS_F_FLAGS /**/
2324 /* HAS_STRUCT_STATFS:
2325 * This symbol, if defined, indicates that the struct statfs
2326 * to do statfs() is supported.
2328 #define HAS_STRUCT_STATFS /**/
2331 * This symbol, if defined, indicates that the fstatvfs routine is
2332 * available to stat filesystems by file descriptors.
2334 #define HAS_FSTATVFS /**/
2337 * This symbol is defined if the _ptr and _cnt fields (or similar)
2338 * of the stdio FILE structure can be used to access the stdio buffer
2339 * for a file handle. If this is defined, then the FILE_ptr(fp)
2340 * and FILE_cnt(fp) macros will also be defined and should be used
2341 * to access these fields.
2344 * This macro is used to access the _ptr field (or equivalent) of the
2345 * FILE structure pointed to by its argument. This macro will always be
2346 * defined if USE_STDIO_PTR is defined.
2348 /* STDIO_PTR_LVALUE:
2349 * This symbol is defined if the FILE_ptr macro can be used as an
2353 * This macro is used to access the _cnt field (or equivalent) of the
2354 * FILE structure pointed to by its argument. This macro will always be
2355 * defined if USE_STDIO_PTR is defined.
2357 /* STDIO_CNT_LVALUE:
2358 * This symbol is defined if the FILE_cnt macro can be used as an
2361 /* STDIO_PTR_LVAL_SETS_CNT:
2362 * This symbol is defined if using the FILE_ptr macro as an lvalue
2363 * to increase the pointer by n has the side effect of decreasing the
2364 * value of File_cnt(fp) by n.
2366 /* STDIO_PTR_LVAL_NOCHANGE_CNT:
2367 * This symbol is defined if using the FILE_ptr macro as an lvalue
2368 * to increase the pointer by n leaves File_cnt(fp) unchanged.
2370 #define USE_STDIO_PTR /**/
2371 #ifdef USE_STDIO_PTR
2372 #define FILE_ptr(fp) ((fp)->_ptr)
2373 #define STDIO_PTR_LVALUE /**/
2374 #define FILE_cnt(fp) ((fp)->_cnt)
2375 #define STDIO_CNT_LVALUE /**/
2376 /*#define STDIO_PTR_LVAL_SETS_CNT / **/
2377 #define STDIO_PTR_LVAL_NOCHANGE_CNT /**/
2381 * This symbol is defined if the _base field (or similar) of the
2382 * stdio FILE structure can be used to access the stdio buffer for
2383 * a file handle. If this is defined, then the FILE_base(fp) macro
2384 * will also be defined and should be used to access this field.
2385 * Also, the FILE_bufsiz(fp) macro will be defined and should be used
2386 * to determine the number of bytes in the buffer. USE_STDIO_BASE
2387 * will never be defined unless USE_STDIO_PTR is.
2390 * This macro is used to access the _base field (or equivalent) of the
2391 * FILE structure pointed to by its argument. This macro will always be
2392 * defined if USE_STDIO_BASE is defined.
2395 * This macro is used to determine the number of bytes in the I/O
2396 * buffer pointed to by _base field (or equivalent) of the FILE
2397 * structure pointed to its argument. This macro will always be defined
2398 * if USE_STDIO_BASE is defined.
2400 #define USE_STDIO_BASE /**/
2401 #ifdef USE_STDIO_BASE
2402 #define FILE_base(fp) ((fp)->_base)
2403 #define FILE_bufsiz(fp) ((fp)->_cnt + (fp)->_ptr - (fp)->_base)
2407 * This symbol, if defined, indicates that the strerror routine is
2408 * available to translate error numbers to strings. See the writeup
2409 * of Strerror() in this file before you try to define your own.
2412 * This symbol, if defined, indicates that the sys_errlist array is
2413 * available to translate error numbers to strings. The extern int
2414 * sys_nerr gives the size of that table.
2417 * This preprocessor symbol is defined as a macro if strerror() is
2418 * not available to translate error numbers to strings but sys_errlist[]
2421 #define HAS_STRERROR /**/
2422 #define HAS_SYS_ERRLIST /**/
2423 #define Strerror(e) strerror(e)
2426 * This symbol, if defined, indicates that the strerror_r routine
2427 * is available to strerror re-entrantly.
2429 /* STRERROR_R_PROTO:
2430 * This symbol encodes the prototype of strerror_r.
2432 /*#define HAS_STRERROR_R / **/
2433 #define STRERROR_R_PROTO 0 /**/
2436 * This symbol, if defined, indicates that the strtold routine is
2437 * available to convert strings to long doubles.
2439 /*#define HAS_STRTOLD / **/
2442 * This symbol, if defined, indicates that the strtoll routine is
2443 * available to convert strings to long longs.
2445 /*#define HAS_STRTOLL / **/
2448 * This symbol, if defined, indicates that the strtoq routine is
2449 * available to convert strings to long longs (quads).
2451 /*#define HAS_STRTOQ / **/
2454 * This symbol, if defined, indicates that the strtoul routine is
2455 * available to provide conversion of strings to unsigned long.
2457 #define HAS_STRTOUL /**/
2460 * This symbol, if defined, indicates that the strtoull routine is
2461 * available to convert strings to unsigned long longs.
2463 /*#define HAS_STRTOULL / **/
2466 * This symbol, if defined, indicates that the strtouq routine is
2467 * available to convert strings to unsigned long longs (quads).
2469 /*#define HAS_STRTOUQ / **/
2471 /* HAS_TELLDIR_PROTO:
2472 * This symbol, if defined, indicates that the system provides
2473 * a prototype for the telldir() function. Otherwise, it is up
2474 * to the program to supply one. A good guess is
2475 * extern long telldir(DIR*);
2477 #define HAS_TELLDIR_PROTO /**/
2480 * This symbol, if defined, indicates that the time() routine exists.
2483 * This symbol holds the type returned by time(). It can be long,
2484 * or time_t on BSD sites (in which case <sys/types.h> should be
2487 #define HAS_TIME /**/
2488 #define Time_t time_t /* Time type */
2491 * This symbol, if defined, indicates that the times() routine exists.
2492 * Note that this became obsolete on some systems (SUNOS), which now
2493 * use getrusage(). It may be necessary to include <sys/times.h>.
2495 #define HAS_TIMES /**/
2498 * This symbol, if defined, indicates that the tmpnam_r routine
2499 * is available to tmpnam re-entrantly.
2502 * This symbol encodes the prototype of tmpnam_r.
2504 /*#define HAS_TMPNAM_R / **/
2505 #define TMPNAM_R_PROTO 0 /**/
2508 * This symbol, if defined, indicates that the ualarm routine is
2509 * available to do alarms with microsecond granularity.
2511 #define HAS_UALARM /**/
2514 * This symbol, if defined, indicates that the union semun is
2515 * defined by including <sys/sem.h>. If not, the user code
2516 * probably needs to define it as:
2519 * struct semid_ds *buf;
2520 * unsigned short *array;
2523 /* USE_SEMCTL_SEMUN:
2524 * This symbol, if defined, indicates that union semun is
2525 * used for semctl IPC_STAT.
2527 /* USE_SEMCTL_SEMID_DS:
2528 * This symbol, if defined, indicates that struct semid_ds * is
2529 * used for semctl IPC_STAT.
2531 /*#define HAS_UNION_SEMUN / **/
2532 #define USE_SEMCTL_SEMUN /**/
2533 #define USE_SEMCTL_SEMID_DS /**/
2536 * This symbol, if defined, indicates that the unordered routine is
2537 * available to check whether two doubles are unordered
2538 * (effectively: whether either of them is NaN)
2540 #define HAS_UNORDERED /**/
2543 * This symbol, if defined, indicates that the ustat system call is
2544 * available to query file system statistics by dev_t.
2546 #define HAS_USTAT /**/
2549 * This symbol, if defined, indicates that vfork() exists.
2551 /*#define HAS_VFORK / **/
2554 * This symbol's value is either "void" or "int", corresponding to the
2555 * appropriate return type of a signal handler. Thus, you can declare
2556 * a signal handler using "Signal_t (*handler)()", and define the
2557 * handler using "Signal_t handler(sig)".
2559 #define Signal_t void /* Signal handler's return type */
2562 * This symbol, if defined, indicates that the vprintf routine is available
2563 * to printf with a pointer to an argument list. If unavailable, you
2564 * may need to write your own, probably in terms of _doprnt().
2566 /* USE_CHAR_VSPRINTF:
2567 * This symbol is defined if this system has vsprintf() returning type
2568 * (char*). The trend seems to be to declare it as "int vsprintf()". It
2569 * is up to the package author to declare vsprintf correctly based on the
2572 #define HAS_VPRINTF /**/
2573 /*#define USE_CHAR_VSPRINTF / **/
2576 * This symbol, if defined, indicates that the writev routine is
2577 * available to do scatter writes.
2579 #define HAS_WRITEV /**/
2581 /* USE_DYNAMIC_LOADING:
2582 * This symbol, if defined, indicates that dynamic loading of
2583 * some sort is available.
2585 #define USE_DYNAMIC_LOADING /**/
2588 * This symbol contains the size of a double, so that the C preprocessor
2589 * can make decisions based on it.
2591 #define DOUBLESIZE 8 /**/
2594 * This symbol, if defined, indicates that this system uses
2597 /*#define EBCDIC / **/
2600 * This symbol, if defined, tells that fflush(NULL) does flush
2601 * all pending stdio output.
2604 * This symbol, if defined, tells that to flush
2605 * all pending stdio output one must loop through all
2606 * the stdio file handles stored in an array and fflush them.
2607 * Note that if fflushNULL is defined, fflushall will not
2608 * even be probed for and will be left undefined.
2610 #define FFLUSH_NULL /**/
2611 /*#define FFLUSH_ALL / **/
2614 * This symbol holds the type used to declare file positions in libc.
2615 * It can be fpos_t, long, uint, etc... It may be necessary to include
2616 * <sys/types.h> to get any typedef'ed information.
2618 #define Fpos_t fpos_t /* File position type */
2621 * This symbol defines the format string used for printing a Gid_t.
2623 #define Gid_t_f "u" /**/
2626 * This symbol holds the signedess of a Gid_t.
2627 * 1 for unsigned, -1 for signed.
2629 #define Gid_t_sign 1 /* GID sign */
2632 * This symbol holds the size of a Gid_t in bytes.
2634 #define Gid_t_size 4 /* GID size */
2637 * This symbol holds the return type of getgid() and the type of
2638 * argument to setrgid() and related functions. Typically,
2639 * it is the type of group ids in the kernel. It can be int, ushort,
2640 * gid_t, etc... It may be necessary to include <sys/types.h> to get
2641 * any typedef'ed information.
2643 #define Gid_t gid_t /* Type for getgid(), etc... */
2646 * This symbol holds the type used for the second argument to
2647 * getgroups() and setgroups(). Usually, this is the same as
2648 * gidtype (gid_t) , but sometimes it isn't.
2649 * It can be int, ushort, gid_t, etc...
2650 * It may be necessary to include <sys/types.h> to get any
2651 * typedef'ed information. This is only required if you have
2652 * getgroups() or setgroups()..
2654 #if defined(HAS_GETGROUPS) || defined(HAS_SETGROUPS)
2655 #define Groups_t gid_t /* Type for 2nd arg to [sg]etgroups() */
2659 * This symbol contains the type of the prefix structure element
2660 * in the <db.h> header file. In older versions of DB, it was
2661 * int, while in newer ones it is u_int32_t.
2664 * This symbol contains the type of the prefix structure element
2665 * in the <db.h> header file. In older versions of DB, it was
2666 * int, while in newer ones it is size_t.
2668 /* DB_VERSION_MAJOR_CFG:
2669 * This symbol, if defined, defines the major version number of
2670 * Berkeley DB found in the <db.h> header when Perl was configured.
2672 /* DB_VERSION_MINOR_CFG:
2673 * This symbol, if defined, defines the minor version number of
2674 * Berkeley DB found in the <db.h> header when Perl was configured.
2675 * For DB version 1 this is always 0.
2677 /* DB_VERSION_PATCH_CFG:
2678 * This symbol, if defined, defines the patch version number of
2679 * Berkeley DB found in the <db.h> header when Perl was configured.
2680 * For DB version 1 this is always 0.
2682 #define DB_Hash_t u_int32_t /**/
2683 #define DB_Prefix_t size_t /**/
2684 #define DB_VERSION_MAJOR_CFG 1 /**/
2685 #define DB_VERSION_MINOR_CFG 0 /**/
2686 #define DB_VERSION_PATCH_CFG 0 /**/
2689 * This symbol, if defined, indicates that <fp_class.h> exists and
2690 * should be included.
2692 #define I_FP_CLASS /**/
2695 * This symbol, if defined, indicates to the C program that it should
2699 * This symbol, if defined, indicates to the C program that struct group
2700 * in <grp.h> contains gr_passwd.
2703 #define GRPASSWD /**/
2706 * This symbol, if defined, indicates that <ieeefp.h> exists and
2707 * should be included.
2709 /*#define I_IEEEFP / **/
2712 * This symbol, if defined, indicates to the C program that it should
2713 * include <inttypes.h>.
2715 /*#define I_INTTYPES / **/
2718 * This symbol, if defined, indicates that <libutil.h> exists and
2719 * should be included.
2721 /*#define I_LIBUTIL / **/
2724 * This symbol, if defined, indicates to the C program that it should
2725 * include <mach/cthreads.h>.
2727 /*#define I_MACH_CTHREADS / **/
2730 * This symbol, if defined, indicates that <mntent.h> exists and
2731 * should be included.
2733 /*#define I_MNTENT / **/
2736 * This symbol, if defined, indicates that <netdb.h> exists and
2737 * should be included.
2739 #define I_NETDB /**/
2742 * This symbol, if defined, indicates to the C program that it should
2743 * include <netinet/tcp.h>.
2745 #define I_NETINET_TCP /**/
2748 * This symbol, if defined, indicates that <poll.h> exists and
2749 * should be included.
2754 * This symbol, if defined, indicates that <prot.h> exists and
2755 * should be included.
2760 * This symbol, if defined, indicates to the C program that it should
2761 * include <pthread.h>.
2763 #define I_PTHREAD /**/
2766 * This symbol, if defined, indicates to the C program that it should
2770 * This symbol, if defined, indicates to the C program that struct passwd
2771 * contains pw_quota.
2774 * This symbol, if defined, indicates to the C program that struct passwd
2778 * This symbol, if defined, indicates to the C program that struct passwd
2779 * contains pw_change.
2782 * This symbol, if defined, indicates to the C program that struct passwd
2783 * contains pw_class.
2786 * This symbol, if defined, indicates to the C program that struct passwd
2787 * contains pw_expire.
2790 * This symbol, if defined, indicates to the C program that struct passwd
2791 * contains pw_comment.
2794 * This symbol, if defined, indicates to the C program that struct passwd
2795 * contains pw_gecos.
2798 * This symbol, if defined, indicates to the C program that struct passwd
2799 * contains pw_passwd.
2802 #define PWQUOTA /**/
2803 /*#define PWAGE / **/
2804 /*#define PWCHANGE / **/
2805 /*#define PWCLASS / **/
2806 /*#define PWEXPIRE / **/
2807 #define PWCOMMENT /**/
2808 #define PWGECOS /**/
2809 #define PWPASSWD /**/
2812 * This symbol, if defined, indicates that <shadow.h> exists and
2813 * should be included.
2815 /*#define I_SHADOW / **/
2818 * This symbol, if defined, indicates that <socks.h> exists and
2819 * should be included.
2821 /*#define I_SOCKS / **/
2824 * This symbol, if defined, indicates that <sunmath.h> exists and
2825 * should be included.
2827 /*#define I_SUNMATH / **/
2830 * This symbol, if defined, indicates that <syslog.h> exists and
2831 * should be included.
2833 #define I_SYSLOG /**/
2836 * This symbol, if defined, indicates that <sys/mode.h> exists and
2837 * should be included.
2839 #define I_SYSMODE /**/
2842 * This symbol, if defined, indicates that <sys/mount.h> exists and
2843 * should be included.
2845 #define I_SYS_MOUNT /**/
2848 * This symbol, if defined, indicates that <sys/statfs.h> exists.
2850 /*#define I_SYS_STATFS / **/
2853 * This symbol, if defined, indicates that <sys/statvfs.h> exists and
2854 * should be included.
2856 #define I_SYS_STATVFS /**/
2859 * This symbol, if defined, indicates that <sys/uio.h> exists and
2860 * should be included.
2862 #define I_SYSUIO /**/
2865 * This symbol, if defined, indicates that <sys/utsname.h> exists and
2866 * should be included.
2868 #define I_SYSUTSNAME /**/
2871 * This symbol, if defined, indicates that <sys/vfs.h> exists and
2872 * should be included.
2874 /*#define I_SYS_VFS / **/
2877 * This symbol, if defined, indicates to the C program that it should
2881 * This symbol, if defined, indicates to the C program that it should
2882 * include <sys/time.h>.
2884 /* I_SYS_TIME_KERNEL:
2885 * This symbol, if defined, indicates to the C program that it should
2886 * include <sys/time.h> with KERNEL defined.
2889 * This symbol, if defined, indicates to the C program that
2890 * the struct tm has a tm_zone field.
2892 /*#define I_TIME / **/
2893 #define I_SYS_TIME /**/
2894 /*#define I_SYS_TIME_KERNEL / **/
2895 #define HAS_TM_TM_ZONE /**/
2898 * This symbol, if defined, indicates that <ustat.h> exists and
2899 * should be included.
2901 #define I_USTAT /**/
2903 /* PERL_INC_VERSION_LIST:
2904 * This variable specifies the list of subdirectories in over
2905 * which perl.c:incpush() and lib/lib.pm will automatically
2906 * search when adding directories to @INC, in a format suitable
2907 * for a C initialization string. See the inc_version_list entry
2908 * in Porting/Glossary for more details.
2910 #define PERL_INC_VERSION_LIST 0 /**/
2912 /* INSTALL_USR_BIN_PERL:
2913 * This symbol, if defined, indicates that Perl is to be installed
2914 * also as /usr/bin/perl.
2916 /*#define INSTALL_USR_BIN_PERL / **/
2919 * This symbol, if defined, contains the string used by stdio to
2920 * format long doubles (format 'f') for output.
2923 * This symbol, if defined, contains the string used by stdio to
2924 * format long doubles (format 'g') for output.
2927 * This symbol, if defined, contains the string used by stdio to
2928 * format long doubles (format 'e') for output.
2931 * This symbol, if defined, contains the string used by stdio to
2932 * format long doubles (format 'f') for input.
2934 #define PERL_PRIfldbl "f" /**/
2935 #define PERL_PRIgldbl "g" /**/
2936 #define PERL_PRIeldbl "e" /**/
2937 #define PERL_SCNfldbl "f" /**/
2940 * This symbol holds the type used to declare offsets in the kernel.
2941 * It can be int, long, off_t, etc... It may be necessary to include
2942 * <sys/types.h> to get any typedef'ed information.
2945 * This symbol holds the number of bytes used by the Off_t.
2948 * This symbol holds the number of bytes used by the Off_t.
2950 #define Off_t off_t /* <offset> type */
2951 #define LSEEKSIZE 8 /* <offset> size */
2952 #define Off_t_size 8 /* <offset> size */
2955 * This variable contains the return type of free(). It is usually
2956 * void, but occasionally int.
2959 * This symbol is the type of pointer returned by malloc and realloc.
2961 #define Malloc_t void * /**/
2962 #define Free_t void /**/
2965 * This symbol, if defined, indicates that we're using our own malloc.
2967 /*#define MYMALLOC / **/
2970 * This symbol holds the type used to declare file modes
2971 * for systems calls. It is usually mode_t, but may be
2972 * int or unsigned short. It may be necessary to include <sys/types.h>
2973 * to get any typedef'ed information.
2975 #define Mode_t mode_t /* file mode parameter for system calls */
2978 * This symbol is to be used during open() or fcntl(F_SETFL) to turn on
2979 * non-blocking I/O for the file descriptor. Note that there is no way
2980 * back, i.e. you cannot turn it blocking again this way. If you wish to
2981 * alternatively switch between blocking and non-blocking, use the
2982 * ioctl(FIOSNBIO) call instead, but that is not supported by all devices.
2985 * This symbol holds the errno error code set by read() when no data was
2986 * present on the non-blocking file descriptor.
2989 * This symbol holds the return code from read() when no data is present
2990 * on the non-blocking file descriptor. Be careful! If EOF_NONBLOCK is
2991 * not defined, then you can't distinguish between no data and EOF by
2992 * issuing a read(). You'll have to find another way to tell for sure!
2995 * This symbol, if defined, indicates to the C program that a read() on
2996 * a non-blocking file descriptor will return 0 on EOF, and not the value
2997 * held in RD_NODATA (-1 usually, in that case!).
2999 #define VAL_O_NONBLOCK O_NONBLOCK
3000 #define VAL_EAGAIN EAGAIN
3001 #define RD_NODATA -1
3002 #define EOF_NONBLOCK
3005 * This symbol, if defined, indicates that the system stores
3006 * the variable argument list datatype, va_list, in a format
3007 * that cannot be copied by simple assignment, so that some
3008 * other means must be used when copying is required.
3009 * As such systems vary in their provision (or non-provision)
3010 * of copying mechanisms, handy.h defines a platform-
3011 * independent macro, Perl_va_copy(src, dst), to do the job.
3013 /*#define NEED_VA_COPY / **/
3016 * This symbol holds the type used for the 1st argument
3017 * to gethostbyaddr().
3020 * This symbol holds the type used for the 2nd argument
3021 * to gethostbyaddr().
3024 * This symbol holds the type used for the argument to
3028 * This symbol holds the type used for the 1st argument to
3031 #define Netdb_host_t const char * /**/
3032 #define Netdb_hlen_t int /**/
3033 #define Netdb_name_t const char * /**/
3034 #define Netdb_net_t int /**/
3036 /* PERL_OTHERLIBDIRS:
3037 * This variable contains a colon-separated set of paths for the perl
3038 * binary to search for additional library files or modules.
3039 * These directories will be tacked to the end of @INC.
3040 * Perl will automatically search below each path for version-
3041 * and architecture-specific directories. See PERL_INC_VERSION_LIST
3044 /*#define PERL_OTHERLIBDIRS " " / **/
3047 * This symbol defines the C type used for Perl's IV.
3050 * This symbol defines the C type used for Perl's UV.
3053 * This symbol defines the C type used for Perl's I8.
3056 * This symbol defines the C type used for Perl's U8.
3059 * This symbol defines the C type used for Perl's I16.
3062 * This symbol defines the C type used for Perl's U16.
3065 * This symbol defines the C type used for Perl's I32.
3068 * This symbol defines the C type used for Perl's U32.
3071 * This symbol defines the C type used for Perl's I64.
3074 * This symbol defines the C type used for Perl's U64.
3077 * This symbol defines the C type used for Perl's NV.
3080 * This symbol contains the sizeof(IV).
3083 * This symbol contains the sizeof(UV).
3086 * This symbol contains the sizeof(I8).
3089 * This symbol contains the sizeof(U8).
3092 * This symbol contains the sizeof(I16).
3095 * This symbol contains the sizeof(U16).
3098 * This symbol contains the sizeof(I32).
3101 * This symbol contains the sizeof(U32).
3104 * This symbol contains the sizeof(I64).
3107 * This symbol contains the sizeof(U64).
3110 * This symbol contains the sizeof(NV).
3113 * This symbol, if defined, indicates that a variable of type NVTYPE
3114 * can preserve all the bits of a variable of type UVTYPE.
3116 /* NV_PRESERVES_UV_BITS:
3117 * This symbol contains the number of bits a variable of type NVTYPE
3118 * can preserve of a variable of type UVTYPE.
3120 #define IVTYPE long /**/
3121 #define UVTYPE unsigned long /**/
3122 #define I8TYPE char /**/
3123 #define U8TYPE unsigned char /**/
3124 #define I16TYPE short /**/
3125 #define U16TYPE unsigned short /**/
3126 #define I32TYPE int /**/
3127 #define U32TYPE unsigned int /**/
3129 #define I64TYPE long /**/
3130 #define U64TYPE unsigned long /**/
3132 #define NVTYPE double /**/
3133 #define IVSIZE 8 /**/
3134 #define UVSIZE 8 /**/
3135 #define I8SIZE 1 /**/
3136 #define U8SIZE 1 /**/
3137 #define I16SIZE 2 /**/
3138 #define U16SIZE 2 /**/
3139 #define I32SIZE 4 /**/
3140 #define U32SIZE 4 /**/
3142 #define I64SIZE 8 /**/
3143 #define U64SIZE 8 /**/
3145 #define NVSIZE 8 /**/
3146 #undef NV_PRESERVES_UV
3147 #define NV_PRESERVES_UV_BITS 53
3150 * This symbol defines the format string used for printing a Perl IV
3151 * as a signed decimal integer.
3154 * This symbol defines the format string used for printing a Perl UV
3155 * as an unsigned decimal integer.
3158 * This symbol defines the format string used for printing a Perl UV
3159 * as an unsigned octal integer.
3162 * This symbol defines the format string used for printing a Perl UV
3163 * as an unsigned hexadecimal integer in lowercase abcdef.
3166 * This symbol defines the format string used for printing a Perl UV
3167 * as an unsigned hexadecimal integer in uppercase ABCDEF.
3170 * This symbol defines the format string used for printing a Perl NV
3171 * using %e-ish floating point format.
3174 * This symbol defines the format string used for printing a Perl NV
3175 * using %f-ish floating point format.
3178 * This symbol defines the format string used for printing a Perl NV
3179 * using %g-ish floating point format.
3181 #define IVdf "ld" /**/
3182 #define UVuf "lu" /**/
3183 #define UVof "lo" /**/
3184 #define UVxf "lx" /**/
3185 #define UVXf "lX" /**/
3186 #define NVef "e" /**/
3187 #define NVff "f" /**/
3188 #define NVgf "g" /**/
3191 * This symbol holds the type used to declare process ids in the kernel.
3192 * It can be int, uint, pid_t, etc... It may be necessary to include
3193 * <sys/types.h> to get any typedef'ed information.
3195 #define Pid_t pid_t /* PID type */
3198 * This symbol contains the name of the private library for this package.
3199 * The library is private in the sense that it needn't be in anyone's
3200 * execution path, but it should be accessible by the world. The program
3201 * should be prepared to do ~ expansion.
3204 * This symbol contains the ~name expanded version of PRIVLIB, to be used
3205 * in programs that are not prepared to deal with ~ expansion at run-time.
3207 #define PRIVLIB "/opt/perl/lib/5.7.3" /**/
3208 #define PRIVLIB_EXP "/opt/perl/lib/5.7.3" /**/
3211 * This symbol contains the size of a pointer, so that the C preprocessor
3212 * can make decisions based on it. It will be sizeof(void *) if
3213 * the compiler supports (void *); otherwise it will be
3216 #define PTRSIZE 8 /**/
3219 * This macro is to be used to generate uniformly distributed
3220 * random numbers over the range [0., 1.[. You may have to supply
3221 * an 'extern double drand48();' in your program since SunOS 4.1.3
3222 * doesn't provide you with anything relevant in its headers.
3223 * See HAS_DRAND48_PROTO.
3226 * This symbol defines the type of the argument of the
3227 * random seed function.
3230 * This symbol defines the macro to be used in seeding the
3231 * random number generator (see Drand01).
3234 * This symbol indicates how many bits are produced by the
3235 * function used to generate normalized random numbers.
3236 * Values include 15, 16, 31, and 48.
3238 #define Drand01() drand48() /**/
3239 #define Rand_seed_t long /**/
3240 #define seedDrand01(x) srand48((Rand_seed_t)x) /**/
3241 #define RANDBITS 48 /**/
3244 * This symbol holds the minimum number of bits operated by select.
3245 * That is, if you do select(n, ...), how many bits at least will be
3246 * cleared in the masks if some activity is detected. Usually this
3247 * is either n or 32*ceil(n/32), especially many little-endians do
3248 * the latter. This is only useful if you have select(), naturally.
3250 #define SELECT_MIN_BITS 32 /**/
3253 * This symbol holds the type used for the 2nd, 3rd, and 4th
3254 * arguments to select. Usually, this is 'fd_set *', if HAS_FD_SET
3255 * is defined, and 'int *' otherwise. This is only useful if you
3256 * have select(), of course.
3258 #define Select_fd_set_t fd_set * /**/
3261 * This symbol contains a list of signal names in order of
3262 * signal number. This is intended
3263 * to be used as a static array initialization, like this:
3264 * char *sig_name[] = { SIG_NAME };
3265 * The signals in the list are separated with commas, and each signal
3266 * is surrounded by double quotes. There is no leading SIG in the signal
3267 * name, i.e. SIGQUIT is known as "QUIT".
3268 * Gaps in the signal numbers (up to NSIG) are filled in with NUMnn,
3269 * etc., where nn is the actual signal number (e.g. NUM37).
3270 * The signal number for sig_name[i] is stored in sig_num[i].
3271 * The last element is 0 to terminate the list with a NULL. This
3272 * corresponds to the 0 at the end of the sig_num list.
3275 * This symbol contains a list of signal numbers, in the same order as the
3276 * SIG_NAME list. It is suitable for static array initialization, as in:
3277 * int sig_num[] = { SIG_NUM };
3278 * The signals in the list are separated with commas, and the indices
3279 * within that list and the SIG_NAME list match, so it's easy to compute
3280 * the signal name from a number or vice versa at the price of a small
3281 * dynamic linear lookup.
3282 * Duplicates are allowed, but are moved to the end of the list.
3283 * The signal number corresponding to sig_name[i] is sig_number[i].
3284 * if (i < NSIG) then sig_number[i] == i.
3285 * The last element is 0, corresponding to the 0 at the end of
3286 * the sig_name list.
3289 * This variable contains the number of elements of the sig_name
3290 * and sig_num arrays, excluding the final NULL entry.
3292 #define SIG_NAME "ZERO", "HUP", "INT", "QUIT", "ILL", "TRAP", "ABRT", "EMT", "FPE", "KILL", "BUS", "SEGV", "SYS", "PIPE", "ALRM", "TERM", "IOINT", "STOP", "TSTP", "CONT", "CHLD", "TTIN", "TTOU", "AIO", "XCPU", "XFSZ", "VTALRM", "PROF", "WINCH", "INFO", "USR1", "USR2", "RESV", "RTMIN", "NUM34", "NUM35", "NUM36", "NUM37", "NUM38", "NUM39", "NUM40", "NUM41", "NUM42", "NUM43", "NUM44", "NUM45", "NUM46", "NUM47", "MAX", "IOT", "LOST", "URG", "CLD", "IO", "POLL", "PTY", "PWR", "RTMAX", 0 /**/
3293 #define SIG_NUM 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 6, 6, 16, 20, 23, 23, 23, 29, 48, 0 /**/
3294 #define SIG_SIZE 58 /**/
3297 * This symbol contains the name of the private library for this package.
3298 * The library is private in the sense that it needn't be in anyone's
3299 * execution path, but it should be accessible by the world. The program
3300 * should be prepared to do ~ expansion.
3301 * The standard distribution will put nothing in this directory.
3302 * After perl has been installed, users may install their own local
3303 * architecture-dependent modules in this directory with
3304 * MakeMaker Makefile.PL
3305 * or equivalent. See INSTALL for details.
3308 * This symbol contains the ~name expanded version of SITEARCH, to be used
3309 * in programs that are not prepared to deal with ~ expansion at run-time.
3311 #define SITEARCH "/opt/perl/lib/site_perl/5.7.3/alpha-dec_osf" /**/
3312 #define SITEARCH_EXP "/opt/perl/lib/site_perl/5.7.3/alpha-dec_osf" /**/
3315 * This symbol contains the name of the private library for this package.
3316 * The library is private in the sense that it needn't be in anyone's
3317 * execution path, but it should be accessible by the world. The program
3318 * should be prepared to do ~ expansion.
3319 * The standard distribution will put nothing in this directory.
3320 * After perl has been installed, users may install their own local
3321 * architecture-independent modules in this directory with
3322 * MakeMaker Makefile.PL
3323 * or equivalent. See INSTALL for details.
3326 * This symbol contains the ~name expanded version of SITELIB, to be used
3327 * in programs that are not prepared to deal with ~ expansion at run-time.
3330 * This define is SITELIB_EXP with any trailing version-specific component
3331 * removed. The elements in inc_version_list (inc_version_list.U) can
3332 * be tacked onto this variable to generate a list of directories to search.
3334 #define SITELIB "/opt/perl/lib/site_perl/5.7.3" /**/
3335 #define SITELIB_EXP "/opt/perl/lib/site_perl/5.7.3" /**/
3336 #define SITELIB_STEM "/opt/perl/lib/site_perl" /**/
3339 * This symbol holds the size of a Size_t in bytes.
3341 #define Size_t_size 8 /* */
3344 * This symbol holds the type used to declare length parameters
3345 * for string functions. It is usually size_t, but may be
3346 * unsigned long, int, etc. It may be necessary to include
3347 * <sys/types.h> to get any typedef'ed information.
3349 #define Size_t size_t /* length paramater for string functions */
3352 * This symbol holds the type used for the size argument of
3353 * various socket calls (just the base type, not the pointer-to).
3355 #define Sock_size_t int /**/
3358 * This symbol holds the type used by functions that return
3359 * a count of bytes or an error condition. It must be a signed type.
3360 * It is usually ssize_t, but may be long or int, etc.
3361 * It may be necessary to include <sys/types.h> or <unistd.h>
3362 * to get any typedef'ed information.
3363 * We will pick a type such that sizeof(SSize_t) == sizeof(Size_t).
3365 #define SSize_t ssize_t /* signed count of bytes */
3368 * This variable contains the string to put in front of a perl
3369 * script to make sure (one hopes) that it runs with perl and not
3372 #define STARTPERL "#!/opt/perl/bin/perl5.7.3" /**/
3375 * This symbol is defined to be the type of char used in stdio.h.
3376 * It has the values "unsigned char" or "char".
3378 #define STDCHAR unsigned char /**/
3380 /* HAS_STDIO_STREAM_ARRAY:
3381 * This symbol, if defined, tells that there is an array
3382 * holding the stdio streams.
3384 /* STDIO_STREAM_ARRAY:
3385 * This symbol tells the name of the array holding the stdio streams.
3386 * Usual values include _iob, __iob, and __sF.
3388 #define HAS_STDIO_STREAM_ARRAY /**/
3389 #define STDIO_STREAM_ARRAY _iob
3392 * This symbol defines the format string used for printing a Uid_t.
3394 #define Uid_t_f "u" /**/
3397 * This symbol holds the signedess of a Uid_t.
3398 * 1 for unsigned, -1 for signed.
3400 #define Uid_t_sign 1 /* UID sign */
3403 * This symbol holds the size of a Uid_t in bytes.
3405 #define Uid_t_size 4 /* UID size */
3408 * This symbol holds the type used to declare user ids in the kernel.
3409 * It can be int, ushort, uid_t, etc... It may be necessary to include
3410 * <sys/types.h> to get any typedef'ed information.
3412 #define Uid_t uid_t /* UID type */
3415 * This symbol, if defined, indicates that 64-bit integers should
3416 * be used when available. If not defined, the native integers
3417 * will be employed (be they 32 or 64 bits). The minimal possible
3418 * 64-bitness is used, just enough to get 64-bit integers into Perl.
3419 * This may mean using for example "long longs", while your memory
3420 * may still be limited to 2 gigabytes.
3423 * This symbol, if defined, indicates that 64-bit integers should
3424 * be used when available. If not defined, the native integers
3425 * will be used (be they 32 or 64 bits). The maximal possible
3426 * 64-bitness is employed: LP64 or ILP64, meaning that you will
3427 * be able to use more than 2 gigabytes of memory. This mode is
3428 * even more binary incompatible than USE_64_BIT_INT. You may not
3429 * be able to run the resulting executable in a 32-bit CPU at all or
3430 * you may need at least to reboot your OS to 64-bit mode.
3432 #ifndef USE_64_BIT_INT
3433 #define USE_64_BIT_INT /**/
3436 #ifndef USE_64_BIT_ALL
3437 #define USE_64_BIT_ALL /**/
3441 * This symbol, if defined, indicates that large file support
3442 * should be used when available.
3444 #ifndef USE_LARGE_FILES
3445 #define USE_LARGE_FILES /**/
3449 * This symbol, if defined, indicates that long doubles should
3450 * be used when available.
3452 #ifndef USE_LONG_DOUBLE
3453 /*#define USE_LONG_DOUBLE / **/
3457 * This symbol, if defined, indicates that 64-bit interfaces and
3458 * long doubles should be used when available.
3460 #ifndef USE_MORE_BITS
3461 /*#define USE_MORE_BITS / **/
3465 * This symbol, if defined, indicates that Perl should
3466 * be built to use multiplicity.
3468 #ifndef MULTIPLICITY
3469 /*#define MULTIPLICITY / **/
3473 * This symbol, if defined, indicates that the PerlIO abstraction should
3474 * be used throughout. If not defined, stdio should be
3475 * used in a fully backward compatible manner.
3478 #define USE_PERLIO /**/
3482 * This symbol, if defined, indicates that Perl should
3483 * be built to use socks.
3486 /*#define USE_SOCKS / **/
3490 * This symbol, if defined, indicates that Perl should be built to
3491 * use the interpreter-based threading implementation.
3494 * This symbol, if defined, indicates that Perl should be built to
3495 * use the 5.005-based threading implementation.
3497 /* OLD_PTHREADS_API:
3498 * This symbol, if defined, indicates that Perl should
3499 * be built to use the old draft POSIX threads API.
3501 /* USE_REENTRANT_API:
3502 * This symbol, if defined, indicates that Perl should
3503 * try to use the various _r versions of library functions.
3504 * This is extremely experimental.
3506 /*#define USE_5005THREADS / **/
3507 /*#define USE_ITHREADS / **/
3508 #if defined(USE_5005THREADS) && !defined(USE_ITHREADS)
3509 #define USE_THREADS /* until src is revised*/
3511 /*#define OLD_PTHREADS_API / **/
3512 /*#define USE_REENTRANT_API / **/
3515 * If defined, this symbol contains the name of a private library.
3516 * The library is private in the sense that it needn't be in anyone's
3517 * execution path, but it should be accessible by the world.
3518 * It may have a ~ on the front.
3519 * The standard distribution will put nothing in this directory.
3520 * Vendors who distribute perl may wish to place their own
3521 * architecture-dependent modules and extensions in this directory with
3522 * MakeMaker Makefile.PL INSTALLDIRS=vendor
3523 * or equivalent. See INSTALL for details.
3525 /* PERL_VENDORARCH_EXP:
3526 * This symbol contains the ~name expanded version of PERL_VENDORARCH, to be used
3527 * in programs that are not prepared to deal with ~ expansion at run-time.
3529 /*#define PERL_VENDORARCH "" / **/
3530 /*#define PERL_VENDORARCH_EXP "" / **/
3532 /* PERL_VENDORLIB_EXP:
3533 * This symbol contains the ~name expanded version of VENDORLIB, to be used
3534 * in programs that are not prepared to deal with ~ expansion at run-time.
3536 /* PERL_VENDORLIB_STEM:
3537 * This define is PERL_VENDORLIB_EXP with any trailing version-specific component
3538 * removed. The elements in inc_version_list (inc_version_list.U) can
3539 * be tacked onto this variable to generate a list of directories to search.
3541 /*#define PERL_VENDORLIB_EXP "" / **/
3542 /*#define PERL_VENDORLIB_STEM "" / **/
3545 * This symbol indicates how much support of the void type is given by this
3546 * compiler. What various bits mean:
3548 * 1 = supports declaration of void
3549 * 2 = supports arrays of pointers to functions returning void
3550 * 4 = supports comparisons between pointers to void functions and
3551 * addresses of void functions
3552 * 8 = suports declaration of generic void pointers
3554 * The package designer should define VOIDUSED to indicate the requirements
3555 * of the package. This can be done either by #defining VOIDUSED before
3556 * including config.h, or by defining defvoidused in Myinit.U. If the
3557 * latter approach is taken, only those flags will be tested. If the
3558 * level of void support necessary is not present, defines void to int.
3563 #define VOIDFLAGS 15
3564 #if (VOIDFLAGS & VOIDUSED) != VOIDUSED
3565 #define void int /* is void to be avoided? */
3566 #define M_VOID /* Xenix strikes again */
3569 /* PERL_XS_APIVERSION:
3570 * This variable contains the version of the oldest perl binary
3571 * compatible with the present perl. perl.c:incpush() and
3572 * lib/lib.pm will automatically search in /opt/perl/lib/site_perl/5.7.3/alpha-dec_osf for older
3573 * directories across major versions back to xs_apiversion.
3574 * This is only useful if you have a perl library directory tree
3575 * structured like the default one.
3576 * See INSTALL for how this works.
3577 * The versioned site_perl directory was introduced in 5.005,
3578 * so that is the lowest possible value.
3579 * Since this can depend on compile time options
3580 * it is set by Configure. Other non-default sources
3581 * of potential incompatibility, such as multiplicity, threads,
3582 * debugging, 64bits, sfio, etc., are not checked for currently,
3583 * though in principle we could go snooping around in old
3586 /* PERL_PM_APIVERSION:
3587 * This variable contains the version of the oldest perl
3588 * compatible with the present perl. (That is, pure perl modules
3589 * written for pm_apiversion will still work for the current
3590 * version). perl.c:incpush() and lib/lib.pm will automatically
3591 * search in /opt/perl/lib/site_perl/5.7.3 for older directories across major versions
3592 * back to pm_apiversion. This is only useful if you have a perl
3593 * library directory tree structured like the default one. The
3594 * versioned site_perl library was introduced in 5.005, so that's
3595 * the default setting for this variable. It's hard to imagine
3596 * it changing before Perl6. It is included here for symmetry
3597 * with xs_apiveprsion -- the searching algorithms will
3598 * (presumably) be similar.
3599 * See the INSTALL file for how this works.
3601 #define PERL_XS_APIVERSION "5.7.3"
3602 #define PERL_PM_APIVERSION "5.005"
3605 * This symbol, if defined, indicates that the crypt routine is available
3606 * to encrypt passwords and the like.
3608 #define HAS_CRYPT /**/
3610 /* SETUID_SCRIPTS_ARE_SECURE_NOW:
3611 * This symbol, if defined, indicates that the bug that prevents
3612 * setuid scripts from being secure is not present in this kernel.
3615 * This symbol, if defined, indicates that the C program should
3616 * check the script that it is executing for setuid/setgid bits, and
3617 * attempt to emulate setuid/setgid on systems that have disabled
3618 * setuid #! scripts because the kernel can't do it securely.
3619 * It is up to the package designer to make sure that this emulation
3620 * is done securely. Among other things, it should do an fstat on
3621 * the script it just opened to make sure it really is a setuid/setgid
3622 * script, it should make sure the arguments passed correspond exactly
3623 * to the argument on the #! line, and it should not trust any
3624 * subprocesses to which it must pass the filename rather than the
3625 * file descriptor of the script to be executed.
3627 /*#define SETUID_SCRIPTS_ARE_SECURE_NOW / **/
3628 /*#define DOSUID / **/
3631 * This symbol holds the return type of the shmat() system call.
3632 * Usually set to 'void *' or 'char *'.
3634 /* HAS_SHMAT_PROTOTYPE:
3635 * This symbol, if defined, indicates that the sys/shm.h includes
3636 * a prototype for shmat(). Otherwise, it is up to the program to
3637 * guess one. Shmat_t shmat(int, Shmat_t, int) is a good guess,
3638 * but not always right so it should be emitted by the program only
3639 * when HAS_SHMAT_PROTOTYPE is not defined to avoid conflicting defs.
3641 #define Shmat_t void * /**/
3642 #define HAS_SHMAT_PROTOTYPE /**/
3645 * This symbol, if defined, indicates that <ndbm.h> exists and should
3651 * This symbol, if defined, indicates that <stdarg.h> exists and should
3655 * This symbol, if defined, indicates to the C program that it should
3656 * include <varargs.h>.
3658 #define I_STDARG /**/
3659 /*#define I_VARARGS / **/
3662 * If defined, this macro indicates that the C compiler can handle
3663 * function prototypes.
3666 * This macro is used to declare function parameters for folks who want
3667 * to make declarations with prototypes using a different style than
3668 * the above macros. Use double parentheses. For example:
3670 * int main _((int argc, char *argv[]));
3672 #define CAN_PROTOTYPE /**/
3673 #ifdef CAN_PROTOTYPE
3674 #define _(args) args
3680 * This symbol contains the full pathname to the shell used on this
3681 * on this system to execute Bourne shell scripts. Usually, this will be
3682 * /bin/sh, though it's possible that some systems will have /bin/ksh,
3683 * /bin/pdksh, /bin/ash, /bin/bash, or even something such as
3686 #define SH_PATH "/bin/sh" /**/
3688 /* USE_CROSS_COMPILE:
3689 * This symbol, if defined, indicates that Perl is being cross-compiled.
3692 * This symbol, if defined, indicates the target architecture
3693 * Perl has been cross-compiled to. Undefined if not a cross-compile.
3695 #ifndef USE_CROSS_COMPILE
3696 /*#define USE_CROSS_COMPILE / **/
3697 #define PERL_TARGETARCH "" /**/
3700 /* HAS_DBMINIT_PROTO:
3701 * This symbol, if defined, indicates that the system provides
3702 * a prototype for the dbminit() function. Otherwise, it is up
3703 * to the program to supply one. A good guess is
3704 * extern int dbminit(char *);
3706 /*#define HAS_DBMINIT_PROTO / **/
3709 * This manifest constant lets the C program know that dirfd
3712 #define HAS_DIRFD /**/
3715 * This symbol, if defined, indicates that the system provides
3716 * a prototype for the flock() function. Otherwise, it is up
3717 * to the program to supply one. A good guess is
3718 * extern int flock(int, int);
3720 /*#define HAS_FLOCK_PROTO / **/
3723 * This symbol, if defined, indicates that the fpclassl routine is
3724 * available to classify long doubles. Available for example in IRIX.
3725 * The returned values are defined in <ieeefp.h> and are:
3727 * FP_SNAN signaling NaN
3729 * FP_NINF negative infinity
3730 * FP_PINF positive infinity
3731 * FP_NDENORM negative denormalized non-zero
3732 * FP_PDENORM positive denormalized non-zero
3733 * FP_NZERO negative zero
3734 * FP_PZERO positive zero
3735 * FP_NNORM negative normalized non-zero
3736 * FP_PNORM positive normalized non-zero
3738 /*#define HAS_FPCLASSL / **/
3741 * This symbol, if defined, indicates that the nl_langinfo routine is
3742 * available to return local data. You will also need <langinfo.h>
3743 * and therefore I_LANGINFO.
3745 #define HAS_NL_LANGINFO /**/
3748 * This symbol is defined if PROCSELFEXE_PATH is a symlink
3749 * to the absolute pathname of the executing program.
3751 /* PROCSELFEXE_PATH:
3752 * If HAS_PROCSELFEXE is defined this symbol is the filename
3753 * of the symbolic link pointing to the absolute pathname of
3754 * the executing program.
3756 /*#define HAS_PROCSELFEXE / **/
3757 #if defined(HAS_PROCSELFEXE) && !defined(PROCSELFEXE_PATH)
3758 #define PROCSELFEXE_PATH /**/
3762 * This symbol, if defined, indicates that the sigprocmask
3763 * system call is available to examine or change the signal mask
3764 * of the calling process.
3766 #define HAS_SIGPROCMASK /**/
3769 * This symbol, if defined, indicates that the sockatmark routine is
3770 * available to test whether a socket is at the out-of-band mark.
3772 /*#define HAS_SOCKATMARK / **/
3774 /* HAS_SOCKATMARK_PROTO:
3775 * This symbol, if defined, indicates that the system provides
3776 * a prototype for the sockatmark() function. Otherwise, it is up
3777 * to the program to supply one. A good guess is
3778 * extern int sockatmark(int);
3780 /*#define HAS_SOCKATMARK_PROTO / **/
3782 /* HAS_SETRESGID_PROTO:
3783 * This symbol, if defined, indicates that the system provides
3784 * a prototype for the setresgid() function. Otherwise, it is up
3785 * to the program to supply one. Good guesses are
3786 * extern int setresgid(uid_t ruid, uid_t euid, uid_t suid);
3788 /*#define HAS_SETRESGID_PROTO / **/
3790 /* HAS_SETRESUID_PROTO:
3791 * This symbol, if defined, indicates that the system provides
3792 * a prototype for the setresuid() function. Otherwise, it is up
3793 * to the program to supply one. Good guesses are
3794 * extern int setresuid(uid_t ruid, uid_t euid, uid_t suid);
3796 /*#define HAS_SETRESUID_PROTO / **/
3799 * This symbol, if defined, indicates that the strftime routine is
3800 * available to do time formatting.
3802 #define HAS_STRFTIME /**/
3804 /* HAS_SYSCALL_PROTO:
3805 * This symbol, if defined, indicates that the system provides
3806 * a prototype for the syscall() function. Otherwise, it is up
3807 * to the program to supply one. Good guesses are
3808 * extern int syscall(int, ...);
3809 * extern int syscall(long, ...);
3811 /*#define HAS_SYSCALL_PROTO / **/
3813 /* U32_ALIGNMENT_REQUIRED:
3814 * This symbol, if defined, indicates that you must access
3815 * character data through U32-aligned pointers.
3817 #define U32_ALIGNMENT_REQUIRED /**/
3819 /* HAS_USLEEP_PROTO:
3820 * This symbol, if defined, indicates that the system provides
3821 * a prototype for the usleep() function. Otherwise, it is up
3822 * to the program to supply one. A good guess is
3823 * extern int usleep(useconds_t);
3825 /*#define HAS_USLEEP_PROTO / **/
3828 * This symbol, if defined, indicates that <crypt.h> exists and
3829 * should be included.
3831 #define I_CRYPT /**/
3834 * This symbol, if defined, indicates that <fp.h> exists and
3835 * should be included.
3840 * This symbol, if defined, indicates that <langinfo.h> exists and
3841 * should be included.
3843 #define I_LANGINFO /**/
3846 * This symbol, if defined, indicates that the ctermid_r routine
3847 * is available to ctermid re-entrantly.
3850 * This symbol encodes the prototype of ctermid_r.
3852 /*#define HAS_CTERMID_R / **/
3853 #define CTERMID_R_PROTO 0 /**/
3855 /* HAS_ENDHOSTENT_R:
3856 * This symbol, if defined, indicates that the endhostent_r routine
3857 * is available to endhostent re-entrantly.
3859 /* ENDHOSTENT_R_PROTO:
3860 * This symbol encodes the prototype of endhostent_r.
3862 /*#define HAS_ENDHOSTENT_R / **/
3863 #define ENDHOSTENT_R_PROTO 0 /**/
3866 * This symbol, if defined, indicates that the endnetent_r routine
3867 * is available to endnetent re-entrantly.
3869 /* ENDNETENT_R_PROTO:
3870 * This symbol encodes the prototype of endnetent_r.
3872 /*#define HAS_ENDNETENT_R / **/
3873 #define ENDNETENT_R_PROTO 0 /**/
3875 /* HAS_ENDPROTOENT_R:
3876 * This symbol, if defined, indicates that the endprotoent_r routine
3877 * is available to endprotoent re-entrantly.
3879 /* ENDPROTOENT_R_PROTO:
3880 * This symbol encodes the prototype of endprotoent_r.
3882 /*#define HAS_ENDPROTOENT_R / **/
3883 #define ENDPROTOENT_R_PROTO 0 /**/
3885 /* HAS_ENDSERVENT_R:
3886 * This symbol, if defined, indicates that the endservent_r routine
3887 * is available to endservent re-entrantly.
3889 /* ENDSERVENT_R_PROTO:
3890 * This symbol encodes the prototype of endservent_r.
3892 /*#define HAS_ENDSERVENT_R / **/
3893 #define ENDSERVENT_R_PROTO 0 /**/
3895 /* HAS_GETHOSTBYADDR_R:
3896 * This symbol, if defined, indicates that the gethostbyaddr_r routine
3897 * is available to gethostbyaddr re-entrantly.
3899 /* GETHOSTBYADDR_R_PROTO:
3900 * This symbol encodes the prototype of gethostbyaddr_r.
3902 /*#define HAS_GETHOSTBYADDR_R / **/
3903 #define GETHOSTBYADDR_R_PROTO 0 /**/
3905 /* HAS_GETHOSTBYNAME_R:
3906 * This symbol, if defined, indicates that the gethostbyname_r routine
3907 * is available to gethostbyname re-entrantly.
3909 /* GETHOSTBYNAME_R_PROTO:
3910 * This symbol encodes the prototype of gethostbyname_r.
3912 /*#define HAS_GETHOSTBYNAME_R / **/
3913 #define GETHOSTBYNAME_R_PROTO 0 /**/
3915 /* HAS_GETHOSTENT_R:
3916 * This symbol, if defined, indicates that the gethostent_r routine
3917 * is available to gethostent re-entrantly.
3919 /* GETHOSTENT_R_PROTO:
3920 * This symbol encodes the prototype of gethostent_r.
3922 /*#define HAS_GETHOSTENT_R / **/
3923 #define GETHOSTENT_R_PROTO 0 /**/
3925 /* HAS_GETNETBYADDR_R:
3926 * This symbol, if defined, indicates that the getnetbyaddr_r routine
3927 * is available to getnetbyaddr re-entrantly.
3929 /* GETNETBYADDR_R_PROTO:
3930 * This symbol encodes the prototype of getnetbyaddr_r.
3932 /*#define HAS_GETNETBYADDR_R / **/
3933 #define GETNETBYADDR_R_PROTO 0 /**/
3935 /* HAS_GETNETBYNAME_R:
3936 * This symbol, if defined, indicates that the getnetbyname_r routine
3937 * is available to getnetbyname re-entrantly.
3939 /* GETNETBYNAME_R_PROTO:
3940 * This symbol encodes the prototype of getnetbyname_r.
3942 /*#define HAS_GETNETBYNAME_R / **/
3943 #define GETNETBYNAME_R_PROTO 0 /**/
3946 * This symbol, if defined, indicates that the getnetent_r routine
3947 * is available to getnetent re-entrantly.
3949 /* GETNETENT_R_PROTO:
3950 * This symbol encodes the prototype of getnetent_r.
3952 /*#define HAS_GETNETENT_R / **/
3953 #define GETNETENT_R_PROTO 0 /**/
3955 /* HAS_GETPROTOBYNAME_R:
3956 * This symbol, if defined, indicates that the getprotobyname_r routine
3957 * is available to getprotobyname re-entrantly.
3959 /* GETPROTOBYNAME_R_PROTO:
3960 * This symbol encodes the prototype of getprotobyname_r.
3962 /*#define HAS_GETPROTOBYNAME_R / **/
3963 #define GETPROTOBYNAME_R_PROTO 0 /**/
3965 /* HAS_GETPROTOBYNUMBER_R:
3966 * This symbol, if defined, indicates that the getprotobynumber_r routine
3967 * is available to getprotobynumber re-entrantly.
3969 /* GETPROTOBYNUMBER_R_PROTO:
3970 * This symbol encodes the prototype of getprotobynumber_r.
3972 /*#define HAS_GETPROTOBYNUMBER_R / **/
3973 #define GETPROTOBYNUMBER_R_PROTO 0 /**/
3975 /* HAS_GETPROTOENT_R:
3976 * This symbol, if defined, indicates that the getprotoent_r routine
3977 * is available to getprotoent re-entrantly.
3979 /* GETPROTOENT_R_PROTO:
3980 * This symbol encodes the prototype of getprotoent_r.
3982 /*#define HAS_GETPROTOENT_R / **/
3983 #define GETPROTOENT_R_PROTO 0 /**/
3985 /* HAS_GETSERVBYNAME_R:
3986 * This symbol, if defined, indicates that the getservbyname_r routine
3987 * is available to getservbyname re-entrantly.
3989 /* GETSERVBYNAME_R_PROTO:
3990 * This symbol encodes the prototype of getservbyname_r.
3992 /*#define HAS_GETSERVBYNAME_R / **/
3993 #define GETSERVBYNAME_R_PROTO 0 /**/
3995 /* HAS_GETSERVBYPORT_R:
3996 * This symbol, if defined, indicates that the getservbyport_r routine
3997 * is available to getservbyport re-entrantly.
3999 /* GETSERVBYPORT_R_PROTO:
4000 * This symbol encodes the prototype of getservbyport_r.
4002 /*#define HAS_GETSERVBYPORT_R / **/
4003 #define GETSERVBYPORT_R_PROTO 0 /**/
4005 /* HAS_GETSERVENT_R:
4006 * This symbol, if defined, indicates that the getservent_r routine
4007 * is available to getservent re-entrantly.
4009 /* GETSERVENT_R_PROTO:
4010 * This symbol encodes the prototype of getservent_r.
4012 /*#define HAS_GETSERVENT_R / **/
4013 #define GETSERVENT_R_PROTO 0 /**/
4015 /* HAS_PTHREAD_ATFORK:
4016 * This symbol, if defined, indicates that the pthread_atfork routine
4017 * is available setup fork handlers.
4019 #define HAS_PTHREAD_ATFORK /**/
4022 * This symbol, if defined, indicates that the readdir64_r routine
4023 * is available to readdir64 re-entrantly.
4025 /* READDIR64_R_PROTO:
4026 * This symbol encodes the prototype of readdir64_r.
4028 /*#define HAS_READDIR64_R / **/
4029 #define READDIR64_R_PROTO 0 /**/
4031 /* HAS_SETHOSTENT_R:
4032 * This symbol, if defined, indicates that the sethostent_r routine
4033 * is available to sethostent re-entrantly.
4035 /* SETHOSTENT_R_PROTO:
4036 * This symbol encodes the prototype of sethostent_r.
4038 /*#define HAS_SETHOSTENT_R / **/
4039 #define SETHOSTENT_R_PROTO 0 /**/
4042 * This symbol, if defined, indicates that the setlocale_r routine
4043 * is available to setlocale re-entrantly.
4045 /* SETLOCALE_R_PROTO:
4046 * This symbol encodes the prototype of setlocale_r.
4048 /*#define HAS_SETLOCALE_R / **/
4049 #define SETLOCALE_R_PROTO 0 /**/
4052 * This symbol, if defined, indicates that the setnetent_r routine
4053 * is available to setnetent re-entrantly.
4055 /* SETNETENT_R_PROTO:
4056 * This symbol encodes the prototype of setnetent_r.
4058 /*#define HAS_SETNETENT_R / **/
4059 #define SETNETENT_R_PROTO 0 /**/
4061 /* HAS_SETPROTOENT_R:
4062 * This symbol, if defined, indicates that the setprotoent_r routine
4063 * is available to setprotoent re-entrantly.
4065 /* SETPROTOENT_R_PROTO:
4066 * This symbol encodes the prototype of setprotoent_r.
4068 /*#define HAS_SETPROTOENT_R / **/
4069 #define SETPROTOENT_R_PROTO 0 /**/
4071 /* HAS_SETSERVENT_R:
4072 * This symbol, if defined, indicates that the setservent_r routine
4073 * is available to setservent re-entrantly.
4075 /* SETSERVENT_R_PROTO:
4076 * This symbol encodes the prototype of setservent_r.
4078 /*#define HAS_SETSERVENT_R / **/
4079 #define SETSERVENT_R_PROTO 0 /**/
4082 * This symbol, if defined, indicates that the ttyname_r routine
4083 * is available to ttyname re-entrantly.
4086 * This symbol encodes the prototype of ttyname_r.
4088 /*#define HAS_TTYNAME_R / **/
4089 #define TTYNAME_R_PROTO 0 /**/
projects / p5sagit/p5-mst-13.2.git / blob