4 if test -f config.sh; then TOP=.;
5 elif test -f ../config.sh; then TOP=..;
6 elif test -f ../../config.sh; then TOP=../..;
7 elif test -f ../../../config.sh; then TOP=../../..;
8 elif test -f ../../../../config.sh; then TOP=../../../..;
10 echo "Can't find config.sh."; exit 1
15 : This forces SH files to create target in same directory as SH file.
16 : This is so that make depend always knows where to find SH derivatives.
18 */*) cd `expr X$0 : 'X\(.*\)/'` ;;
22 *define*) suidperl='suidperl' ;;
28 pldlflags="$cccdlflags"
29 # NeXT-4 specific stuff. Can't we do this in the hint file?
30 case "${osname}${osvers}" in
32 ld='libtool -dynamic -undefined warning -framework System \
33 -compatibility_version 1 -current_version $(PATCHLEVEL) \
34 -prebind -seg1addr 0x27000000 -install_name $(SHRPDIR)/$@'
42 : Prepare dependency lists for Makefile.
44 for f in $dynamic_ext; do
45 : the dependency named here will never exist
46 base=`echo "$f" | sed 's/.*\///'`
47 dynamic_list="$dynamic_list lib/auto/$f/$base.$dlext"
51 for f in $static_ext; do
52 base=`echo "$f" | sed 's/.*\///'`
53 static_list="$static_list lib/auto/$f/$base\$(LIB_EXT)"
56 echo "Extracting Makefile (with variable substitutions)"
57 $spitshell >Makefile <<!GROK!THIS!
59 # This file is derived from Makefile.SH. Any changes made here will
60 # be lost the next time you run Configure.
61 # Makefile is used to generate $firstmakefile. The only difference
62 # is that $firstmakefile has the dependencies filled in at the end.
65 # I now supply perly.c with the kits, so don't remake perly.c without byacc
75 mallocsrc = $mallocsrc
76 mallocobj = $mallocobj
81 # The following are mentioned only to make metaconfig include the
82 # appropriate questions in Configure. If you want to change these,
83 # edit config.sh instead, or specify --man1dir=/wherever on
84 # installman commandline.
86 scriptdir = $scriptdir
87 shrpdir = $archlibexp/CORE
88 privlib = $installprivlib
94 # The following are used to build and install shared libraries for
96 LDDLFLAGS = $lddlflags
97 CCDLFLAGS = $ccdlflags
99 PLDLFLAGS = $pldlflags
103 dynamic_ext = $dynamic_list
104 static_ext = $static_list
105 ext = \$(dynamic_ext) \$(static_ext)
106 DYNALOADER = lib/auto/DynaLoader/DynaLoader\$(LIB_EXT)
108 libs = $libs $cryptlib
110 public = perl $suidperl utilities translators
112 shellflags = $shellflags
114 # This is set to MAKE=$make if your $make command doesn't
118 # These variables will be used in a future version to make
119 # the make file more portable to non-unix systems.
126 FIRSTMAKEFILE = $firstmakefile
128 # Any special object files needed by this architecture, e.g. os2/os2.obj
131 .SUFFIXES: .c \$(OBJ_EXT)
138 ## In the following dollars and backticks do not need the extra backslash.
139 $spitshell >>Makefile <<'!NO!SUBS!'
141 CCCMD = `sh $(shellflags) cflags $(LIBPERL) $@`
143 private = preplibrary lib/ExtUtils/Miniperl.pm lib/Config.pm
145 # Files to be built with variable substitution before miniperl
147 sh = Makefile.SH cflags.SH config_h.SH makeaperl.SH makedepend.SH \
148 makedir.SH perl_exp.SH writemain.SH
150 shextract = Makefile cflags config.h makeaperl makedepend \
151 makedir perl.exp writemain
153 # Files to be built with variable substitution after miniperl is
154 # available. Dependencies handled manually below (for now).
156 pl = pod/pod2html.PL pod/pod2latex.PL pod/pod2man.PL pod/pod2text.PL
158 plextract = pod/pod2html pod/pod2latex pod/pod2man pod/pod2text
160 addedbyconf = UU $(shextract) $(plextract) pstruct
162 h1 = EXTERN.h INTERN.h XSUB.h av.h config.h cop.h cv.h dosish.h
163 h2 = embed.h form.h gv.h handy.h hv.h keywords.h mg.h op.h
164 h3 = opcode.h patchlevel.h perl.h perly.h pp.h proto.h regcomp.h
165 h4 = regexp.h scope.h sv.h unixish.h util.h perlio.h
166 h = $(h1) $(h2) $(h3) $(h4)
168 c1 = $(mallocsrc) av.c scope.c op.c doop.c doio.c dump.c hv.c mg.c
169 c2 = perl.c perly.c pp.c pp_hot.c pp_ctl.c pp_sys.c regcomp.c regexec.c
170 c3 = gv.c sv.c taint.c toke.c util.c deb.c run.c universal.c globals.c perlio.c
172 c = $(c1) $(c2) $(c3) miniperlmain.c perlmain.c
174 obj1 = $(mallocobj) gv$(OBJ_EXT) toke$(OBJ_EXT) perly$(OBJ_EXT) op$(OBJ_EXT) regcomp$(OBJ_EXT) dump$(OBJ_EXT) util$(OBJ_EXT) mg$(OBJ_EXT)
175 obj2 = hv$(OBJ_EXT) av$(OBJ_EXT) run$(OBJ_EXT) pp_hot$(OBJ_EXT) sv$(OBJ_EXT) pp$(OBJ_EXT) scope$(OBJ_EXT) pp_ctl$(OBJ_EXT) pp_sys$(OBJ_EXT)
176 obj3 = doop$(OBJ_EXT) doio$(OBJ_EXT) regexec$(OBJ_EXT) taint$(OBJ_EXT) deb$(OBJ_EXT) universal$(OBJ_EXT) globals$(OBJ_EXT) perlio$(OBJ_EXT)
178 obj = $(obj1) $(obj2) $(obj3) $(ARCHOBJS)
180 # Once perl has been Configure'd and built ok you build different
181 # perl variants (Debugging, Embedded, Multiplicity etc) by saying:
182 # make clean; make LIBPERL=libperl<type>.a
183 # where <type> is some combination of 'd' and(or) 'e' or 'm'.
184 # See cflags to understand how this works.
186 # This mechanism is getting clunky and might not even work any more.
187 # EMBEDDING is on by default, and MULTIPLICITY doesn't work.
193 $(CCCMD) $(PLDLFLAGS) $*.c
195 all: $(FIRSTMAKEFILE) miniperl $(private) $(plextract) $(public) $(dynamic_ext)
196 @echo " "; echo " Everything is up to date."
198 translators: miniperl lib/Config.pm FORCE
199 @echo " "; echo " Making x2p stuff"; cd x2p; $(MAKE) all
201 utilities: miniperl lib/Config.pm FORCE
202 @echo " "; echo " Making utilities"; cd utils; $(MAKE) all
205 # This is now done by installman only if you actually want the man pages.
206 # @echo " "; echo " Making docs"; cd pod; $(MAKE) all;
208 # Phony target to force checking subdirectories.
209 # Apparently some makes require an action for the FORCE target.
213 miniperlmain$(OBJ_EXT): miniperlmain.c
214 $(CCCMD) $(PLDLFLAGS) $*.c
216 perlmain.c: miniperlmain.c config.sh $(FIRSTMAKEFILE)
217 sh writemain $(DYNALOADER) $(static_ext) > tmp
218 sh mv-if-diff tmp perlmain.c
220 perlmain$(OBJ_EXT): perlmain.c
221 $(CCCMD) $(PLDLFLAGS) $*.c
223 # The file ext.libs is a list of libraries that must be linked in
224 # for static extensions, e.g. -lm -lgdbm, etc. The individual
225 # static extension Makefile's add to it.
226 ext.libs: $(static_ext)
227 -@test -f ext.libs || touch ext.libs
231 # How to build libperl. This is still rather convoluted.
232 # Load up custom Makefile.SH fragment for shared loading and executables:
233 if test -r $osname/Makefile.SHs ; then
234 . $osname/Makefile.SHs
235 $spitshell >>Makefile <<!GROK!THIS!
237 Makefile: $osname/Makefile.SHs
240 $spitshell >>Makefile <<'!NO!SUBS!'
241 $(LIBPERL): $& perl$(OBJ_EXT) $(obj)
243 case "$useshrplib" in
245 $spitshell >>Makefile <<'!NO!SUBS!'
246 $(LD) $(LDDLFLAGS) -o $@ perl$(OBJ_EXT) $(obj)
250 $spitshell >>Makefile <<'!NO!SUBS!'
252 $(AR) rcu $(LIBPERL) perl$(OBJ_EXT) $(obj)
253 @$(ranlib) $(LIBPERL)
257 $spitshell >>Makefile <<'!NO!SUBS!'
259 # How to build executables.
261 # The $& notation tells Sequent machines that it can do a parallel make,
262 # and is harmless otherwise.
263 # The miniperl -w -MExporter line is a basic cheap test to catch errors
264 # before make goes on to run preplibrary and then MakeMaker on extensions.
265 # This is very handy because later errors are often caused by miniperl
266 # build problems but that's not obvious to the novice.
267 # The Module used here must not depend on Config or any extensions.
269 miniperl: $& miniperlmain$(OBJ_EXT) $(LIBPERL)
270 $(CC) $(LARGE) $(CLDFLAGS) -o miniperl miniperlmain$(OBJ_EXT) $(LIBPERL) $(libs)
271 @./miniperl -w -Ilib -MExporter -e 0 || $(MAKE) minitest
273 perl: $& perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs
274 $(SHRPENV) $(CC) $(LARGE) $(CLDFLAGS) $(CCDLFLAGS) -o perl perlmain$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LIBPERL) `cat ext.libs` $(libs)
276 pureperl: $& perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs
277 purify $(CC) $(LARGE) $(CLDFLAGS) $(CCDLFLAGS) -o pureperl perlmain$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LIBPERL) `cat ext.libs` $(libs)
279 quantperl: $& perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs
280 quantify $(CC) $(LARGE) $(CLDFLAGS) $(CCDLFLAGS) -o quantperl perlmain$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LIBPERL) `cat ext.libs` $(libs)
282 # This version, if specified in Configure, does ONLY those scripts which need
283 # set-id emulation. Suidperl must be setuid root. It contains the "taint"
284 # checks as well as the special code to validate that the script in question
285 # has been invoked correctly.
287 suidperl: $& sperl$(OBJ_EXT) perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs
288 $(CC) $(LARGE) $(CLDFLAGS) $(CCDLFLAGS) -o suidperl perlmain$(OBJ_EXT) sperl$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) `cat ext.libs` $(libs)
294 $spitshell >>Makefile <<'!NO!SUBS!'
296 sperl$(OBJ_EXT): perl.c perly.h patchlevel.h $(h)
298 $(LNS) perl.c sperl.c
299 $(CCCMD) -DIAMSUID sperl.c
302 # We have to call our ./makedir because Ultrix 4.3 make can't handle the line
303 # test -d lib/auto || mkdir lib/auto
305 preplibrary: miniperl lib/Config.pm $(plextract)
306 @sh ./makedir lib/auto
307 @echo " AutoSplitting perl library"
308 @./miniperl -Ilib -e 'use AutoSplit; \
309 autosplit_lib_modules(@ARGV)' lib/*.pm lib/*/*.pm
311 # Take care to avoid modifying lib/Config.pm without reason
312 lib/Config.pm: config.sh miniperl configpm
313 ./miniperl configpm tmp
314 sh mv-if-diff tmp lib/Config.pm
316 lib/ExtUtils/Miniperl.pm: miniperlmain.c miniperl minimod.pl lib/Config.pm
317 ./miniperl minimod.pl > tmp && mv tmp $@
319 $(plextract): miniperl lib/Config.pm
320 ./miniperl -Ilib $@.PL
322 install: all install.perl install.man
324 install.perl: all installperl
327 install.man: all installman
330 # Not implemented yet.
331 #install.html: all installhtml
334 # I now supply perly.c with the kits, so the following section is
335 # used only if you force byacc to run by saying
337 # Since we patch up the byacc output, the perly.fixer script needs
338 # to run with precisely the same version of byacc as I use. You
339 # normally shouldn't remake perly.[ch].
342 @ echo 'Expect' 130 shift/reduce and 1 reduce/reduce conflict
344 sh $(shellflags) ./perly.fixer y.tab.c perly.c
345 sed -e 's/fprintf *( *stderr *,/PerlIO_printf(Perl_debug_log,/g' perly.c >perly.tmp && mv perly.tmp perly.c
347 echo 'extern YYSTYPE yylval;' >>perly.h
348 - perl vms/vms_yfix.pl perly.c perly.h vms/perly_c.vms vms/perly_h.vms
350 # We don't want to regenerate perly.c and perly.h, but they might
351 # appear out-of-date after a patch is applied or a new distribution is
359 # The following three header files are generated automatically
360 # keywords.h: keywords.pl
361 # opcode.h: opcode.pl
362 # embed.h: embed.pl global.sym interp.sym
363 # The correct versions should be already supplied with the perl kit,
364 # in case you don't have perl available.
365 # To force them to run, type
373 # Names added to $(dynamic_ext) or $(static_ext) will automatically
374 # get built. There should ordinarily be no need to change any of
375 # this part of makefile.
377 # The dummy dependency is a place holder in case $(dynamic_ext) or
378 # $(static_ext) is empty.
380 # DynaLoader may be needed for extensions that use Makefile.PL.
382 $(DYNALOADER): miniperl preplibrary FORCE
383 @sh ext/util/make_ext static $@ LIBPERL_A=$(LIBPERL)
385 d_dummy $(dynamic_ext): miniperl preplibrary $(DYNALOADER) FORCE
386 @sh ext/util/make_ext dynamic $@ LIBPERL_A=$(LIBPERL)
388 s_dummy $(static_ext): miniperl preplibrary $(DYNALOADER) FORCE
389 @sh ext/util/make_ext static $@ LIBPERL_A=$(LIBPERL)
392 rm -f *$(OBJ_EXT) *$(LIB_EXT) all perlmain.c
393 rm -f perl.exp ext.libs
394 -rm -f perl.export perl.dll perl.libexp perl.map perl.def
395 -cd pod; $(MAKE) clean
396 -cd utils; $(MAKE) clean
397 -cd x2p; $(MAKE) clean
398 -@for x in $(DYNALOADER) $(dynamic_ext) $(static_ext) ; do \
399 sh ext/util/make_ext clean $$x ; \
401 rm -f perl suidperl miniperl $(LIBPERL)
404 -cd os2; rm -f Makefile
405 -cd pod; $(MAKE) realclean
406 -cd utils; $(MAKE) realclean
407 -cd x2p; $(MAKE) realclean
408 -@for x in $(DYNALOADER) $(dynamic_ext) $(static_ext) ; do \
409 sh ext/util/make_ext realclean $$x ; \
411 rm -f *.orig */*.orig *~ */*~ core t/core t/c t/perl
412 rm -rf $(addedbyconf)
413 rm -f $(FIRSTMAKEFILE) $(FIRSTMAKEFILE).old
417 rm -f h2ph.man pstruct
419 @echo "Note that make realclean does not delete config.sh"
422 rm -f config.sh cppstdin
426 # The following lint has practically everything turned on. Unfortunately,
427 # you have to wade through a lot of mumbo jumbo that can't be suppressed.
428 # If the source file has a /*NOSTRICT*/ somewhere, ignore the lint message
432 lint $(lintflags) $(defs) perly.c $(c) > perl.fuzz
434 # Need to unset during recursion to go out of loop
436 MAKEDEPEND = makedepend
438 $(FIRSTMAKEFILE): Makefile $(MAKEDEPEND)
439 $(MAKE) depend MAKEDEPEND=
441 config.h: config_h.SH config.sh
444 perl.exp: perl_exp.SH config.sh
447 # When done, touch perlmain.c so that it doesn't get remade each time.
450 - test -s perlmain.c && touch perlmain.c
451 cd x2p; $(MAKE) depend
453 # Cannot postpone this until $firstmakefile is ready ;-)
454 makedepend: makedepend.SH config.sh
457 check test: miniperl perl preplibrary $(dynamic_ext)
458 - cd t && (rm -f perl$(EXE_EXT); $(LNS) ../perl$(EXE_EXT) perl$(EXE_EXT)) && ./perl TEST </dev/tty
460 # Can't depend on lib/Config.pm because that might be where miniperl
463 @echo "You may see some irrelevant test failures if you have been unable"
464 @echo "to build lib/Config.pm."
465 - cd t && (rm -f perl$(EXE_EXT); $(LNS) ../miniperl$(EXE_EXT) perl$(EXE_EXT)) \
466 && ./perl TEST base/*.t comp/*.t cmd/*.t io/*.t op/*.t </dev/tty
469 echo $(c) | tr ' ' '\012' >.clist
472 echo $(h) | tr ' ' '\012' >.hlist
475 echo $(sh) | tr ' ' '\012' >.shlist
478 echo $(pl) | tr ' ' '\012' >.pllist
480 Makefile: Makefile.SH ./config.sh
484 perl '-MExtUtils::Manifest=&fullcheck' -e 'fullcheck()'
486 # AUTOMATICALLY GENERATED MAKE DEPENDENCIES--PUT NOTHING BELOW THIS LINE
487 # If this runs make out of memory, delete /usr/include lines.
494 $ln Makefile ../Makefile
497 $rm -f $firstmakefile