4 if test -f config.sh; then TOP=.;
5 elif test -f ../config.sh; then TOP=..;
6 elif test -f ../../config.sh; then TOP=../..;
7 elif test -f ../../../config.sh; then TOP=../../..;
8 elif test -f ../../../../config.sh; then TOP=../../../..;
10 echo "Can't find config.sh."; exit 1
15 : This forces SH files to create target in same directory as SH file.
16 : This is so that make depend always knows where to find SH derivatives.
18 */*) cd `expr X$0 : 'X\(.*\)/'` ;;
22 *define*) suidperl='suidperl' ;;
26 linklibperl='$(LIBPERL)'
27 shrpldflags='$(LDDLFLAGS)'
30 pldlflags="$cccdlflags"
31 # NeXT-4 specific stuff. Can't we do this in the hint file?
32 case "${osname}${osvers}" in
35 lddlflags="-dynamic -undefined warning -framework System \
36 -compatibility_version 1 -current_version $patchlevel \
37 -prebind -seg1addr 0x27000000 -install_name \$(shrpdir)/\$@"
39 sunos*|freebsd[23]*|netbsd*)
43 shrpldflags="-H512 -T512 -bhalt:4 -bM:SRE -bE:perl.exp"
44 shrpldflags="$shrpldflags -b noentry $ldflags $libs $cryptlib"
45 aixinstdir=`pwd | sed 's/\/UU$//'`
46 linklibperl="-L $archlibexp/CORE -L $aixinstdir -lperl"
54 : Prepare dependency lists for Makefile.
56 for f in $dynamic_ext; do
57 : the dependency named here will never exist
58 base=`echo "$f" | sed 's/.*\///'`
59 dynamic_list="$dynamic_list lib/auto/$f/$base.$dlext"
63 for f in $static_ext; do
64 base=`echo "$f" | sed 's/.*\///'`
65 static_list="$static_list lib/auto/$f/$base\$(LIB_EXT)"
68 echo "Extracting Makefile (with variable substitutions)"
69 $spitshell >Makefile <<!GROK!THIS!
71 # This file is derived from Makefile.SH. Any changes made here will
72 # be lost the next time you run Configure.
73 # Makefile is used to generate $firstmakefile. The only difference
74 # is that $firstmakefile has the dependencies filled in at the end.
77 # I now supply perly.c with the kits, so don't remake perly.c without byacc
87 mallocsrc = $mallocsrc
88 mallocobj = $mallocobj
93 # The following are mentioned only to make metaconfig include the
94 # appropriate questions in Configure. If you want to change these,
95 # edit config.sh instead, or specify --man1dir=/wherever on
96 # installman commandline.
98 scriptdir = $scriptdir
99 shrpdir = $archlibexp/CORE
100 privlib = $installprivlib
106 # The following are used to build and install shared libraries for
108 LDDLFLAGS = $lddlflags
109 SHRPLDFLAGS = $shrpldflags
110 CCDLFLAGS = $ccdlflags
112 PLDLFLAGS = $pldlflags
114 LLIBPERL= $linklibperl
117 dynamic_ext = $dynamic_list
118 static_ext = $static_list
119 ext = \$(dynamic_ext) \$(static_ext)
120 DYNALOADER = lib/auto/DynaLoader/DynaLoader\$(LIB_EXT)
122 libs = $libs $cryptlib
124 public = perl $suidperl utilities translators
126 shellflags = $shellflags
128 # This is set to MAKE=$make if your $make command doesn't
132 # These variables will be used in a future version to make
133 # the make file more portable to non-unix systems.
140 FIRSTMAKEFILE = $firstmakefile
142 # Any special object files needed by this architecture, e.g. os2/os2.obj
145 .SUFFIXES: .c \$(OBJ_EXT)
152 ## In the following dollars and backticks do not need the extra backslash.
153 $spitshell >>Makefile <<'!NO!SUBS!'
155 CCCMD = `sh $(shellflags) cflags $(LIBPERL) $@`
157 private = preplibrary lib/ExtUtils/Miniperl.pm lib/Config.pm
159 # Files to be built with variable substitution before miniperl
161 sh = Makefile.SH cflags.SH config_h.SH makeaperl.SH makedepend.SH \
162 makedir.SH perl_exp.SH writemain.SH
164 shextract = Makefile cflags config.h makeaperl makedepend \
165 makedir perl.exp writemain
167 # Files to be built with variable substitution after miniperl is
168 # available. Dependencies handled manually below (for now).
170 pl = pod/pod2html.PL pod/pod2latex.PL pod/pod2man.PL pod/pod2text.PL
172 plextract = pod/pod2html pod/pod2latex pod/pod2man pod/pod2text
174 addedbyconf = UU $(shextract) $(plextract) pstruct
176 h1 = EXTERN.h INTERN.h XSUB.h av.h config.h cop.h cv.h dosish.h
177 h2 = embed.h form.h gv.h handy.h hv.h keywords.h mg.h op.h
178 h3 = opcode.h patchlevel.h perl.h perly.h pp.h proto.h regcomp.h
179 h4 = regexp.h scope.h sv.h unixish.h util.h perlio.h thread.h
180 h = $(h1) $(h2) $(h3) $(h4)
182 c1 = $(mallocsrc) av.c scope.c op.c doop.c doio.c dump.c hv.c mg.c
183 c2 = perl.c perly.c pp.c pp_hot.c pp_ctl.c pp_sys.c regcomp.c regexec.c
184 c3 = gv.c sv.c taint.c toke.c util.c deb.c run.c universal.c globals.c perlio.c
186 c = $(c1) $(c2) $(c3) miniperlmain.c perlmain.c
188 obj1 = $(mallocobj) gv$(OBJ_EXT) toke$(OBJ_EXT) perly$(OBJ_EXT) op$(OBJ_EXT) regcomp$(OBJ_EXT) dump$(OBJ_EXT) util$(OBJ_EXT) mg$(OBJ_EXT)
189 obj2 = hv$(OBJ_EXT) av$(OBJ_EXT) run$(OBJ_EXT) pp_hot$(OBJ_EXT) sv$(OBJ_EXT) pp$(OBJ_EXT) scope$(OBJ_EXT) pp_ctl$(OBJ_EXT) pp_sys$(OBJ_EXT)
190 obj3 = doop$(OBJ_EXT) doio$(OBJ_EXT) regexec$(OBJ_EXT) taint$(OBJ_EXT) deb$(OBJ_EXT) universal$(OBJ_EXT) globals$(OBJ_EXT) perlio$(OBJ_EXT)
192 obj = $(obj1) $(obj2) $(obj3) $(ARCHOBJS)
194 # Once perl has been Configure'd and built ok you build different
195 # perl variants (Debugging, Embedded, Multiplicity etc) by saying:
196 # make clean; make LIBPERL=libperl<type>.a
197 # where <type> is some combination of 'd' and(or) 'e' or 'm'.
198 # See cflags to understand how this works.
200 # This mechanism is getting clunky and might not even work any more.
201 # EMBEDDING is on by default, and MULTIPLICITY doesn't work.
207 $(CCCMD) $(PLDLFLAGS) $*.c
209 all: $(FIRSTMAKEFILE) miniperl $(private) $(plextract) $(public) $(dynamic_ext)
210 @echo " "; echo " Everything is up to date."
212 translators: miniperl lib/Config.pm FORCE
213 @echo " "; echo " Making x2p stuff"; cd x2p; $(MAKE) all
215 utilities: miniperl lib/Config.pm FORCE
216 @echo " "; echo " Making utilities"; cd utils; $(MAKE) all
219 # This is now done by installman only if you actually want the man pages.
220 # @echo " "; echo " Making docs"; cd pod; $(MAKE) all;
222 # Phony target to force checking subdirectories.
223 # Apparently some makes require an action for the FORCE target.
227 miniperlmain$(OBJ_EXT): miniperlmain.c
228 $(CCCMD) $(PLDLFLAGS) $*.c
230 perlmain.c: miniperlmain.c config.sh $(FIRSTMAKEFILE)
231 sh writemain $(DYNALOADER) $(static_ext) > tmp
232 sh mv-if-diff tmp perlmain.c
234 perlmain$(OBJ_EXT): perlmain.c
235 $(CCCMD) $(PLDLFLAGS) $*.c
237 # The file ext.libs is a list of libraries that must be linked in
238 # for static extensions, e.g. -lm -lgdbm, etc. The individual
239 # static extension Makefile's add to it.
240 ext.libs: $(static_ext)
241 -@test -f ext.libs || touch ext.libs
245 # How to build libperl. This is still rather convoluted.
246 # Load up custom Makefile.SH fragment for shared loading and executables:
247 if test -r $osname/Makefile.SHs ; then
248 . $osname/Makefile.SHs
249 $spitshell >>Makefile <<!GROK!THIS!
251 Makefile: $osname/Makefile.SHs
254 $spitshell >>Makefile <<'!NO!SUBS!'
255 $(LIBPERL): $& perl$(OBJ_EXT) $(obj)
257 case "$useshrplib" in
259 $spitshell >>Makefile <<'!NO!SUBS!'
260 $(LD) $(SHRPLDFLAGS) -o $@ perl$(OBJ_EXT) $(obj)
264 $spitshell >>Makefile <<'!NO!SUBS!'
265 mv $@ libperl$(OBJ_EXT)
266 $(AR) qv $(LIBPERL) libperl$(OBJ_EXT)
272 $spitshell >>Makefile <<'!NO!SUBS!'
274 $(AR) rcu $(LIBPERL) perl$(OBJ_EXT) $(obj)
275 @$(ranlib) $(LIBPERL)
279 $spitshell >>Makefile <<'!NO!SUBS!'
281 # How to build executables.
283 # The $& notation tells Sequent machines that it can do a parallel make,
284 # and is harmless otherwise.
285 # The miniperl -w -MExporter line is a basic cheap test to catch errors
286 # before make goes on to run preplibrary and then MakeMaker on extensions.
287 # This is very handy because later errors are often caused by miniperl
288 # build problems but that's not obvious to the novice.
289 # The Module used here must not depend on Config or any extensions.
291 miniperl: $& miniperlmain$(OBJ_EXT) $(LIBPERL)
292 $(CC) $(LARGE) $(CLDFLAGS) -o miniperl miniperlmain$(OBJ_EXT) $(LLIBPERL) $(libs)
293 @./miniperl -w -Ilib -MExporter -e 0 || $(MAKE) minitest
295 perl: $& perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs
296 $(SHRPENV) $(CC) $(LARGE) $(CLDFLAGS) $(CCDLFLAGS) -o perl perlmain$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
298 pureperl: $& perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs
299 purify $(CC) $(LARGE) $(CLDFLAGS) $(CCDLFLAGS) -o pureperl perlmain$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
301 purecovperl: $& perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs
302 purecov $(CC) $(LARGE) $(CLDFLAGS) $(CCDLFLAGS) -o purecovperl perlmain$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
304 quantperl: $& perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs
305 quantify $(CC) $(LARGE) $(CLDFLAGS) $(CCDLFLAGS) -o quantperl perlmain$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
307 # This version, if specified in Configure, does ONLY those scripts which need
308 # set-id emulation. Suidperl must be setuid root. It contains the "taint"
309 # checks as well as the special code to validate that the script in question
310 # has been invoked correctly.
312 suidperl: $& sperl$(OBJ_EXT) perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs
313 $(CC) $(LARGE) $(CLDFLAGS) $(CCDLFLAGS) -o suidperl perlmain$(OBJ_EXT) sperl$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
319 $spitshell >>Makefile <<'!NO!SUBS!'
321 sperl$(OBJ_EXT): perl.c perly.h patchlevel.h $(h)
323 $(LNS) perl.c sperl.c
324 $(CCCMD) -DIAMSUID sperl.c
327 # We have to call our ./makedir because Ultrix 4.3 make can't handle the line
328 # test -d lib/auto || mkdir lib/auto
330 preplibrary: miniperl lib/Config.pm $(plextract)
331 @sh ./makedir lib/auto
332 @echo " AutoSplitting perl library"
333 @./miniperl -Ilib -e 'use AutoSplit; \
334 autosplit_lib_modules(@ARGV)' lib/*.pm lib/*/*.pm
336 # Take care to avoid modifying lib/Config.pm without reason
337 lib/Config.pm: config.sh miniperl configpm
338 ./miniperl configpm tmp
339 sh mv-if-diff tmp lib/Config.pm
341 lib/ExtUtils/Miniperl.pm: miniperlmain.c miniperl minimod.pl lib/Config.pm
342 ./miniperl minimod.pl > tmp && mv tmp $@
344 $(plextract): miniperl lib/Config.pm
345 ./miniperl -Ilib $@.PL
347 install: all install.perl install.man
349 install.perl: all installperl
352 install.man: all installman
355 # Not implemented yet.
356 #install.html: all installhtml
359 # I now supply perly.c with the kits, so the following section is
360 # used only if you force byacc to run by saying
362 # Since we patch up the byacc output, the perly.fixer script needs
363 # to run with precisely the same version of byacc as I use. You
364 # normally shouldn't remake perly.[ch].
367 @ echo 'Expect' 113 shift/reduce and 1 reduce/reduce conflict
369 sh $(shellflags) ./perly.fixer y.tab.c perly.c
370 sed -e 's/fprintf *( *stderr *,/PerlIO_printf(Perl_debug_log,/g' \
371 -e 's/y\.tab/perly/g' perly.c >perly.tmp && mv perly.tmp perly.c
372 echo 'extern YYSTYPE yylval;' >>y.tab.h
373 cmp -s y.tab.h perly.h && rm -f y.tab.h || mv y.tab.h perly.h
374 - perl vms/vms_yfix.pl perly.c perly.h vms/perly_c.vms vms/perly_h.vms
376 # We don't want to regenerate perly.c and perly.h, but they might
377 # appear out-of-date after a patch is applied or a new distribution is
385 # The following three header files are generated automatically
386 # keywords.h: keywords.pl
387 # opcode.h: opcode.pl
388 # embed.h: embed.pl global.sym interp.sym
389 # The correct versions should be already supplied with the perl kit,
390 # in case you don't have perl available.
391 # To force them to run, type
399 # Names added to $(dynamic_ext) or $(static_ext) will automatically
400 # get built. There should ordinarily be no need to change any of
401 # this part of makefile.
403 # The dummy dependency is a place holder in case $(dynamic_ext) or
404 # $(static_ext) is empty.
406 # DynaLoader may be needed for extensions that use Makefile.PL.
408 $(DYNALOADER): miniperl preplibrary FORCE
409 @sh ext/util/make_ext static $@ LIBPERL_A=$(LIBPERL)
411 d_dummy $(dynamic_ext): miniperl preplibrary $(DYNALOADER) FORCE
412 @sh ext/util/make_ext dynamic $@ LIBPERL_A=$(LIBPERL)
414 s_dummy $(static_ext): miniperl preplibrary $(DYNALOADER) FORCE
415 @sh ext/util/make_ext static $@ LIBPERL_A=$(LIBPERL)
419 realclean: _cleaner _mopup
420 @echo "Note that make realclean does not delete config.sh"
422 clobber: _cleaner _mopup
423 rm -f config.sh cppstdin
427 # Do not 'make _mopup' directly.
429 rm -f *$(OBJ_EXT) *$(LIB_EXT) all perlmain.c
430 rm -f perl.exp ext.libs
431 -rm -f perl.export perl.dll perl.libexp perl.map perl.def
432 rm -f perl suidperl miniperl $(LIBPERL)
434 # Do not 'make _tidy' directly.
436 -cd pod; $(MAKE) clean
437 -cd utils; $(MAKE) clean
438 -cd x2p; $(MAKE) clean
439 -@for x in $(DYNALOADER) $(dynamic_ext) $(static_ext) ; do \
440 sh ext/util/make_ext clean $$x ; \
443 # Do not 'make _cleaner' directly.
445 -cd os2; rm -f Makefile
446 -cd pod; $(MAKE) realclean
447 -cd utils; $(MAKE) realclean
448 -cd x2p; $(MAKE) realclean
449 -@for x in $(DYNALOADER) $(dynamic_ext) $(static_ext) ; do \
450 sh ext/util/make_ext realclean $$x ; \
452 rm -f *.orig */*.orig *~ */*~ core t/core t/c t/perl
453 rm -rf $(addedbyconf)
454 rm -f $(FIRSTMAKEFILE) $(FIRSTMAKEFILE).old
458 rm -f h2ph.man pstruct
461 # The following lint has practically everything turned on. Unfortunately,
462 # you have to wade through a lot of mumbo jumbo that can't be suppressed.
463 # If the source file has a /*NOSTRICT*/ somewhere, ignore the lint message
467 lint $(lintflags) $(defs) perly.c $(c) > perl.fuzz
469 # Need to unset during recursion to go out of loop
471 MAKEDEPEND = makedepend
473 $(FIRSTMAKEFILE): Makefile $(MAKEDEPEND)
474 $(MAKE) depend MAKEDEPEND=
476 config.h: config_h.SH config.sh
479 perl.exp: perl_exp.SH config.sh
482 # When done, touch perlmain.c so that it doesn't get remade each time.
485 - test -s perlmain.c && touch perlmain.c
486 cd x2p; $(MAKE) depend
488 # Cannot postpone this until $firstmakefile is ready ;-)
489 makedepend: makedepend.SH config.sh
492 check test: miniperl perl preplibrary $(dynamic_ext)
493 - cd t && (rm -f perl$(EXE_EXT); $(LNS) ../perl$(EXE_EXT) perl$(EXE_EXT)) && ./perl TEST </dev/tty
495 # Can't depend on lib/Config.pm because that might be where miniperl
498 @echo "You may see some irrelevant test failures if you have been unable"
499 @echo "to build lib/Config.pm."
500 - cd t && (rm -f perl$(EXE_EXT); $(LNS) ../miniperl$(EXE_EXT) perl$(EXE_EXT)) \
501 && ./perl TEST base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t </dev/tty
504 echo $(c) | tr ' ' '\012' >.clist
507 echo $(h) | tr ' ' '\012' >.hlist
510 echo $(sh) | tr ' ' '\012' >.shlist
513 echo $(pl) | tr ' ' '\012' >.pllist
515 Makefile: Makefile.SH ./config.sh
519 perl '-MExtUtils::Manifest=&fullcheck' -e 'fullcheck()'
521 # AUTOMATICALLY GENERATED MAKE DEPENDENCIES--PUT NOTHING BELOW THIS LINE
522 # If this runs make out of memory, delete /usr/include lines.
529 $ln Makefile ../Makefile
532 $rm -f $firstmakefile