4 if test -f config.sh; then TOP=.;
5 elif test -f ../config.sh; then TOP=..;
6 elif test -f ../../config.sh; then TOP=../..;
7 elif test -f ../../../config.sh; then TOP=../../..;
8 elif test -f ../../../../config.sh; then TOP=../../../..;
10 echo "Can't find config.sh."; exit 1
15 : This forces SH files to create target in same directory as SH file.
16 : This is so that make depend always knows where to find SH derivatives.
18 */*) cd `expr X$0 : 'X\(.*\)/'` ;;
22 *define*) suidperl='suidperl' ;;
26 linklibperl='$(LIBPERL)'
29 pldlflags="$cccdlflags"
30 # NeXT-4 specific stuff. Can't we do this in the hint file?
31 case "${osname}${osvers}" in
33 ld='libtool -dynamic -undefined warning -framework System \
34 -compatibility_version 1 -current_version $(PATCHLEVEL) \
35 -prebind -seg1addr 0x27000000 -install_name $(SHRPDIR)/$@'
46 : Prepare dependency lists for Makefile.
48 for f in $dynamic_ext; do
49 : the dependency named here will never exist
50 base=`echo "$f" | sed 's/.*\///'`
51 dynamic_list="$dynamic_list lib/auto/$f/$base.$dlext"
55 for f in $static_ext; do
56 base=`echo "$f" | sed 's/.*\///'`
57 static_list="$static_list lib/auto/$f/$base\$(LIB_EXT)"
60 echo "Extracting Makefile (with variable substitutions)"
61 $spitshell >Makefile <<!GROK!THIS!
63 # This file is derived from Makefile.SH. Any changes made here will
64 # be lost the next time you run Configure.
65 # Makefile is used to generate $firstmakefile. The only difference
66 # is that $firstmakefile has the dependencies filled in at the end.
69 # I now supply perly.c with the kits, so don't remake perly.c without byacc
79 mallocsrc = $mallocsrc
80 mallocobj = $mallocobj
85 # The following are mentioned only to make metaconfig include the
86 # appropriate questions in Configure. If you want to change these,
87 # edit config.sh instead, or specify --man1dir=/wherever on
88 # installman commandline.
90 scriptdir = $scriptdir
91 shrpdir = $archlibexp/CORE
92 privlib = $installprivlib
98 # The following are used to build and install shared libraries for
100 LDDLFLAGS = $lddlflags
101 CCDLFLAGS = $ccdlflags
103 PLDLFLAGS = $pldlflags
105 LLIBPERL= $linklibperl
108 dynamic_ext = $dynamic_list
109 static_ext = $static_list
110 ext = \$(dynamic_ext) \$(static_ext)
111 DYNALOADER = lib/auto/DynaLoader/DynaLoader\$(LIB_EXT)
113 libs = $libs $cryptlib
115 public = perl $suidperl utilities translators
117 shellflags = $shellflags
119 # This is set to MAKE=$make if your $make command doesn't
123 # These variables will be used in a future version to make
124 # the make file more portable to non-unix systems.
131 FIRSTMAKEFILE = $firstmakefile
133 # Any special object files needed by this architecture, e.g. os2/os2.obj
136 .SUFFIXES: .c \$(OBJ_EXT)
143 ## In the following dollars and backticks do not need the extra backslash.
144 $spitshell >>Makefile <<'!NO!SUBS!'
146 CCCMD = `sh $(shellflags) cflags $(LIBPERL) $@`
148 private = preplibrary lib/ExtUtils/Miniperl.pm lib/Config.pm
150 # Files to be built with variable substitution before miniperl
152 sh = Makefile.SH cflags.SH config_h.SH makeaperl.SH makedepend.SH \
153 makedir.SH perl_exp.SH writemain.SH
155 shextract = Makefile cflags config.h makeaperl makedepend \
156 makedir perl.exp writemain
158 # Files to be built with variable substitution after miniperl is
159 # available. Dependencies handled manually below (for now).
161 pl = pod/pod2html.PL pod/pod2latex.PL pod/pod2man.PL pod/pod2text.PL
163 plextract = pod/pod2html pod/pod2latex pod/pod2man pod/pod2text
165 addedbyconf = UU $(shextract) $(plextract) pstruct
167 h1 = EXTERN.h INTERN.h XSUB.h av.h config.h cop.h cv.h dosish.h
168 h2 = embed.h form.h gv.h handy.h hv.h keywords.h mg.h op.h
169 h3 = opcode.h patchlevel.h perl.h perly.h pp.h proto.h regcomp.h
170 h4 = regexp.h scope.h sv.h unixish.h util.h perlio.h
171 h = $(h1) $(h2) $(h3) $(h4)
173 c1 = $(mallocsrc) av.c scope.c op.c doop.c doio.c dump.c hv.c mg.c
174 c2 = perl.c perly.c pp.c pp_hot.c pp_ctl.c pp_sys.c regcomp.c regexec.c
175 c3 = gv.c sv.c taint.c toke.c util.c deb.c run.c universal.c globals.c perlio.c
177 c = $(c1) $(c2) $(c3) miniperlmain.c perlmain.c
179 obj1 = $(mallocobj) gv$(OBJ_EXT) toke$(OBJ_EXT) perly$(OBJ_EXT) op$(OBJ_EXT) regcomp$(OBJ_EXT) dump$(OBJ_EXT) util$(OBJ_EXT) mg$(OBJ_EXT)
180 obj2 = hv$(OBJ_EXT) av$(OBJ_EXT) run$(OBJ_EXT) pp_hot$(OBJ_EXT) sv$(OBJ_EXT) pp$(OBJ_EXT) scope$(OBJ_EXT) pp_ctl$(OBJ_EXT) pp_sys$(OBJ_EXT)
181 obj3 = doop$(OBJ_EXT) doio$(OBJ_EXT) regexec$(OBJ_EXT) taint$(OBJ_EXT) deb$(OBJ_EXT) universal$(OBJ_EXT) globals$(OBJ_EXT) perlio$(OBJ_EXT)
183 obj = $(obj1) $(obj2) $(obj3) $(ARCHOBJS)
185 # Once perl has been Configure'd and built ok you build different
186 # perl variants (Debugging, Embedded, Multiplicity etc) by saying:
187 # make clean; make LIBPERL=libperl<type>.a
188 # where <type> is some combination of 'd' and(or) 'e' or 'm'.
189 # See cflags to understand how this works.
191 # This mechanism is getting clunky and might not even work any more.
192 # EMBEDDING is on by default, and MULTIPLICITY doesn't work.
198 $(CCCMD) $(PLDLFLAGS) $*.c
200 all: $(FIRSTMAKEFILE) miniperl $(private) $(plextract) $(public) $(dynamic_ext)
201 @echo " "; echo " Everything is up to date."
203 translators: miniperl lib/Config.pm FORCE
204 @echo " "; echo " Making x2p stuff"; cd x2p; $(MAKE) all
206 utilities: miniperl lib/Config.pm FORCE
207 @echo " "; echo " Making utilities"; cd utils; $(MAKE) all
210 # This is now done by installman only if you actually want the man pages.
211 # @echo " "; echo " Making docs"; cd pod; $(MAKE) all;
213 # Phony target to force checking subdirectories.
214 # Apparently some makes require an action for the FORCE target.
218 miniperlmain$(OBJ_EXT): miniperlmain.c
219 $(CCCMD) $(PLDLFLAGS) $*.c
221 perlmain.c: miniperlmain.c config.sh $(FIRSTMAKEFILE)
222 sh writemain $(DYNALOADER) $(static_ext) > tmp
223 sh mv-if-diff tmp perlmain.c
225 perlmain$(OBJ_EXT): perlmain.c
226 $(CCCMD) $(PLDLFLAGS) $*.c
228 # The file ext.libs is a list of libraries that must be linked in
229 # for static extensions, e.g. -lm -lgdbm, etc. The individual
230 # static extension Makefile's add to it.
231 ext.libs: $(static_ext)
232 -@test -f ext.libs || touch ext.libs
236 # How to build libperl. This is still rather convoluted.
237 # Load up custom Makefile.SH fragment for shared loading and executables:
238 if test -r $osname/Makefile.SHs ; then
239 . $osname/Makefile.SHs
240 $spitshell >>Makefile <<!GROK!THIS!
242 Makefile: $osname/Makefile.SHs
245 $spitshell >>Makefile <<'!NO!SUBS!'
246 $(LIBPERL): $& perl$(OBJ_EXT) $(obj)
248 case "$useshrplib" in
250 $spitshell >>Makefile <<'!NO!SUBS!'
251 $(LD) $(LDDLFLAGS) -o $@ perl$(OBJ_EXT) $(obj) $(libs)
255 $spitshell >>Makefile <<'!NO!SUBS!'
257 $(AR) rcu $(LIBPERL) perl$(OBJ_EXT) $(obj)
258 @$(ranlib) $(LIBPERL)
262 $spitshell >>Makefile <<'!NO!SUBS!'
264 # How to build executables.
266 # The $& notation tells Sequent machines that it can do a parallel make,
267 # and is harmless otherwise.
268 # The miniperl -w -MExporter line is a basic cheap test to catch errors
269 # before make goes on to run preplibrary and then MakeMaker on extensions.
270 # This is very handy because later errors are often caused by miniperl
271 # build problems but that's not obvious to the novice.
272 # The Module used here must not depend on Config or any extensions.
274 miniperl: $& miniperlmain$(OBJ_EXT) $(LIBPERL)
275 $(CC) $(LARGE) $(CLDFLAGS) -o miniperl miniperlmain$(OBJ_EXT) $(LLIBPERL) $(libs)
276 @./miniperl -w -Ilib -MExporter -e 0 || $(MAKE) minitest
278 perl: $& perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs
279 $(SHRPENV) $(CC) $(LARGE) $(CLDFLAGS) $(CCDLFLAGS) -o perl perlmain$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
281 pureperl: $& perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs
282 purify $(CC) $(LARGE) $(CLDFLAGS) $(CCDLFLAGS) -o pureperl perlmain$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
284 quantperl: $& perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs
285 quantify $(CC) $(LARGE) $(CLDFLAGS) $(CCDLFLAGS) -o quantperl perlmain$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
287 # This version, if specified in Configure, does ONLY those scripts which need
288 # set-id emulation. Suidperl must be setuid root. It contains the "taint"
289 # checks as well as the special code to validate that the script in question
290 # has been invoked correctly.
292 suidperl: $& sperl$(OBJ_EXT) perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs
293 $(CC) $(LARGE) $(CLDFLAGS) $(CCDLFLAGS) -o suidperl perlmain$(OBJ_EXT) sperl$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
299 $spitshell >>Makefile <<'!NO!SUBS!'
301 sperl$(OBJ_EXT): perl.c perly.h patchlevel.h $(h)
303 $(LNS) perl.c sperl.c
304 $(CCCMD) -DIAMSUID sperl.c
307 # We have to call our ./makedir because Ultrix 4.3 make can't handle the line
308 # test -d lib/auto || mkdir lib/auto
310 preplibrary: miniperl lib/Config.pm $(plextract)
311 @sh ./makedir lib/auto
312 @echo " AutoSplitting perl library"
313 @./miniperl -Ilib -e 'use AutoSplit; \
314 autosplit_lib_modules(@ARGV)' lib/*.pm lib/*/*.pm
316 # Take care to avoid modifying lib/Config.pm without reason
317 lib/Config.pm: config.sh miniperl configpm
318 ./miniperl configpm tmp
319 sh mv-if-diff tmp lib/Config.pm
321 lib/ExtUtils/Miniperl.pm: miniperlmain.c miniperl minimod.pl lib/Config.pm
322 ./miniperl minimod.pl > tmp && mv tmp $@
324 $(plextract): miniperl lib/Config.pm
325 ./miniperl -Ilib $@.PL
327 install: all install.perl install.man
329 install.perl: all installperl
332 install.man: all installman
335 # Not implemented yet.
336 #install.html: all installhtml
339 # I now supply perly.c with the kits, so the following section is
340 # used only if you force byacc to run by saying
342 # Since we patch up the byacc output, the perly.fixer script needs
343 # to run with precisely the same version of byacc as I use. You
344 # normally shouldn't remake perly.[ch].
347 @ echo 'Expect' 113 shift/reduce and 1 reduce/reduce conflict
349 sh $(shellflags) ./perly.fixer y.tab.c perly.c
350 sed -e 's/fprintf *( *stderr *,/PerlIO_printf(Perl_debug_log,/g' \
351 -e 's/y\.tab/perly/g' perly.c >perly.tmp && mv perly.tmp perly.c
352 echo 'extern YYSTYPE yylval;' >>y.tab.h
353 cmp -s y.tab.h perly.h && rm -f y.tab.h || mv y.tab.h perly.h
354 - perl vms/vms_yfix.pl perly.c perly.h vms/perly_c.vms vms/perly_h.vms
356 # We don't want to regenerate perly.c and perly.h, but they might
357 # appear out-of-date after a patch is applied or a new distribution is
365 # The following three header files are generated automatically
366 # keywords.h: keywords.pl
367 # opcode.h: opcode.pl
368 # embed.h: embed.pl global.sym interp.sym
369 # The correct versions should be already supplied with the perl kit,
370 # in case you don't have perl available.
371 # To force them to run, type
379 # Names added to $(dynamic_ext) or $(static_ext) will automatically
380 # get built. There should ordinarily be no need to change any of
381 # this part of makefile.
383 # The dummy dependency is a place holder in case $(dynamic_ext) or
384 # $(static_ext) is empty.
386 # DynaLoader may be needed for extensions that use Makefile.PL.
388 $(DYNALOADER): miniperl preplibrary FORCE
389 @sh ext/util/make_ext static $@ LIBPERL_A=$(LIBPERL)
391 d_dummy $(dynamic_ext): miniperl preplibrary $(DYNALOADER) FORCE
392 @sh ext/util/make_ext dynamic $@ LIBPERL_A=$(LIBPERL)
394 s_dummy $(static_ext): miniperl preplibrary $(DYNALOADER) FORCE
395 @sh ext/util/make_ext static $@ LIBPERL_A=$(LIBPERL)
399 realclean: _cleaner _mopup
400 @echo "Note that make realclean does not delete config.sh"
402 clobber: _cleaner _mopup
403 rm -f config.sh cppstdin
407 # Do not 'make _mopup' directly.
409 rm -f *$(OBJ_EXT) *$(LIB_EXT) all perlmain.c
410 rm -f perl.exp ext.libs
411 -rm -f perl.export perl.dll perl.libexp perl.map perl.def
412 rm -f perl suidperl miniperl $(LIBPERL)
414 # Do not 'make _tidy' directly.
416 -cd pod; $(MAKE) clean
417 -cd utils; $(MAKE) clean
418 -cd x2p; $(MAKE) clean
419 -@for x in $(DYNALOADER) $(dynamic_ext) $(static_ext) ; do \
420 sh ext/util/make_ext clean $$x ; \
423 # Do not 'make _cleaner' directly.
425 -cd os2; rm -f Makefile
426 -cd pod; $(MAKE) realclean
427 -cd utils; $(MAKE) realclean
428 -cd x2p; $(MAKE) realclean
429 -@for x in $(DYNALOADER) $(dynamic_ext) $(static_ext) ; do \
430 sh ext/util/make_ext realclean $$x ; \
432 rm -f *.orig */*.orig *~ */*~ core t/core t/c t/perl
433 rm -rf $(addedbyconf)
434 rm -f $(FIRSTMAKEFILE) $(FIRSTMAKEFILE).old
438 rm -f h2ph.man pstruct
441 # The following lint has practically everything turned on. Unfortunately,
442 # you have to wade through a lot of mumbo jumbo that can't be suppressed.
443 # If the source file has a /*NOSTRICT*/ somewhere, ignore the lint message
447 lint $(lintflags) $(defs) perly.c $(c) > perl.fuzz
449 # Need to unset during recursion to go out of loop
451 MAKEDEPEND = makedepend
453 $(FIRSTMAKEFILE): Makefile $(MAKEDEPEND)
454 $(MAKE) depend MAKEDEPEND=
456 config.h: config_h.SH config.sh
459 perl.exp: perl_exp.SH config.sh
462 # When done, touch perlmain.c so that it doesn't get remade each time.
465 - test -s perlmain.c && touch perlmain.c
466 cd x2p; $(MAKE) depend
468 # Cannot postpone this until $firstmakefile is ready ;-)
469 makedepend: makedepend.SH config.sh
472 check test: miniperl perl preplibrary $(dynamic_ext)
473 - cd t && (rm -f perl$(EXE_EXT); $(LNS) ../perl$(EXE_EXT) perl$(EXE_EXT)) && ./perl TEST </dev/tty
475 # Can't depend on lib/Config.pm because that might be where miniperl
478 @echo "You may see some irrelevant test failures if you have been unable"
479 @echo "to build lib/Config.pm."
480 - cd t && (rm -f perl$(EXE_EXT); $(LNS) ../miniperl$(EXE_EXT) perl$(EXE_EXT)) \
481 && ./perl TEST base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t </dev/tty
484 echo $(c) | tr ' ' '\012' >.clist
487 echo $(h) | tr ' ' '\012' >.hlist
490 echo $(sh) | tr ' ' '\012' >.shlist
493 echo $(pl) | tr ' ' '\012' >.pllist
495 Makefile: Makefile.SH ./config.sh
499 perl '-MExtUtils::Manifest=&fullcheck' -e 'fullcheck()'
501 # AUTOMATICALLY GENERATED MAKE DEPENDENCIES--PUT NOTHING BELOW THIS LINE
502 # If this runs make out of memory, delete /usr/include lines.
509 $ln Makefile ../Makefile
512 $rm -f $firstmakefile