3 if test -f config.sh; then TOP=.;
4 elif test -f ../config.sh; then TOP=..;
5 elif test -f ../../config.sh; then TOP=../..;
6 elif test -f ../../../config.sh; then TOP=../../..;
7 elif test -f ../../../../config.sh; then TOP=../../../..;
9 echo "Can't find config.sh."; exit 1
14 : This forces SH files to create target in same directory as SH file.
15 : This is so that make depend always knows where to find SH derivatives.
17 */*) cd `expr X$0 : 'X\(.*\)/'` ;;
21 *define*) suidperl='suidperl' ;;
28 patchlevel=`egrep '^#define[ ]+PATCHLEVEL' patchlevel.h \
31 *[0-9]) plibsuf=.$so.$patchlevel;;
34 if test "x$plibext" != "x" ; then plibsuf=$plibext d_shrplib=custom ; fi
38 *) shrpenv="env LD_RUN_PATH=$shrpdir";;
40 pldlflags="$cccdlflags";;
45 : Prepare dependency lists for Makefile.
47 for f in $dynamic_ext; do
48 : the dependency named here will never exist
49 base=`echo "$f" | sed 's/.*\///'`
50 dynamic_list="$dynamic_list lib/auto/$f/$base.$dlext"
55 for f in $static_ext; do
56 base=`echo "$f" | sed 's/.*\///'`
57 static_list="$static_list lib/auto/$f/$base\$(LIB_EXT)"
58 if test -f ext/$f/AutoInit.c; then
59 static_ai_list="$static_ai_list ext/$f/AutoInit.c"
61 if test -f ext/$f/AutoInit.pl; then
62 static_ai_list="$static_ai_list ext/$f/AutoInit.pl"
66 echo "Extracting Makefile (with variable substitutions)"
67 $spitshell >Makefile <<'!NO!SUBS!'
69 # This file is derived from Makefile.SH. Any changes made here will
70 # be lost the next time you run Configure.
71 # Makefile is used to generate makefile. The only difference
72 # is that makefile has the dependencies filled in at the end.
77 $spitshell >>Makefile <<!GROK!THIS!
78 # I now supply perly.c with the kits, so don't remake perly.c without byacc
88 mallocsrc = $mallocsrc
89 mallocobj = $mallocobj
94 # The following are mentioned only to make metaconfig include the
95 # appropriate questions in Configure. If you want to change these,
96 # edit config.sh instead, or specify --man1dir=/wherever on
97 # installman commandline.
99 scriptdir = $scriptdir
100 privlib = $installprivlib
106 # The following are used to build and install shared libraries for
108 LDDLFLAGS = $lddlflags
109 CCDLFLAGS = $ccdlflags
111 PLDLFLAGS = $pldlflags
115 dynamic_ext = $dynamic_list
116 static_ext = $static_list
117 ext = \$(dynamic_ext) \$(static_ext)
118 static_ext_autoinit = $static_ai_list
119 DYNALOADER = lib/auto/DynaLoader/DynaLoader\$(LIB_EXT)
121 libs = $libs $cryptlib
123 public = perl $suidperl utilities translators
125 shellflags = $shellflags
127 ## To use an alternate make, set \$altmake in config.sh.
128 MAKE = ${altmake-make}
130 # These variables will be used in a future version to make
131 # the make file more portable to non-unix systems.
138 FIRSTMAKEFILE = $firstmakefile
140 # Any special object files needed by this architecture, e.g. os2/os2.obj
143 .SUFFIXES: .c \$(OBJ_EXT)
147 ## In the following dollars and backticks do not need the extra backslash.
148 $spitshell >>Makefile <<'!NO!SUBS!'
150 CCCMD = `sh $(shellflags) cflags $(perllib) $@`
152 private = preplibrary lib/ExtUtils/Miniperl.pm lib/Config.pm
154 # Files to be built with variable substitution before miniperl
156 sh = Makefile.SH cflags.SH config_h.SH makeaperl.SH makedepend.SH \
157 makedir.SH perl_exp.SH writemain.SH
159 shextract = Makefile cflags config.h makeaperl makedepend \
160 makedir perl_exp writemain
162 # Files to be built with variable substitution after miniperl is
163 # available. Dependencies handled manually below (for now).
165 pl = pod/pod2html.PL pod/pod2latex.PL pod/pod2man.PL pod/pod2text.PL
167 plextract = pod/pod2html pod/pod2latex pod/pod2man pod/pod2text
169 addedbyconf = UU $(shextract) $(plextract) pstruct
171 h1 = EXTERN.h INTERN.h XSUB.h av.h config.h cop.h cv.h dosish.h
172 h2 = embed.h form.h gv.h handy.h hv.h keywords.h mg.h op.h
173 h3 = opcode.h patchlevel.h perl.h perly.h pp.h proto.h regcomp.h
174 h4 = regexp.h scope.h sv.h unixish.h util.h
175 h = $(h1) $(h2) $(h3) $(h4)
177 c1 = $(mallocsrc) av.c scope.c op.c doop.c doio.c dump.c hv.c mg.c
178 c2 = perl.c perly.c pp.c pp_hot.c pp_ctl.c pp_sys.c regcomp.c regexec.c
179 c3 = gv.c sv.c taint.c toke.c util.c deb.c run.c globals.c
181 c = $(c1) $(c2) $(c3) miniperlmain.c perlmain.c
183 obj1 = $(mallocobj) gv$(OBJ_EXT) toke$(OBJ_EXT) perly$(OBJ_EXT) op$(OBJ_EXT) regcomp$(OBJ_EXT) dump$(OBJ_EXT) util$(OBJ_EXT) mg$(OBJ_EXT)
184 obj2 = hv$(OBJ_EXT) av$(OBJ_EXT) run$(OBJ_EXT) pp_hot$(OBJ_EXT) sv$(OBJ_EXT) pp$(OBJ_EXT) scope$(OBJ_EXT) pp_ctl$(OBJ_EXT) pp_sys$(OBJ_EXT)
185 obj3 = doop$(OBJ_EXT) doio$(OBJ_EXT) regexec$(OBJ_EXT) taint$(OBJ_EXT) deb$(OBJ_EXT) globals$(OBJ_EXT)
187 obj = $(obj1) $(obj2) $(obj3) $(ARCHOBJS)
189 # Once perl has been Configure'd and built ok you build different
190 # perl variants (Debugging, Embedded, Multiplicity etc) by saying:
191 # make clean; make perllib=libperl<type>.a
192 # where <type> is some combination of 'd' and(or) 'e' or 'm'.
193 # See cflags to understand how this works.
195 # Eventually some form of 'make-a-perl' script will automate this
196 # together with linking a perl executable with any desired
198 perllib = libperl$(PLIBSUF)
206 $(CCCMD) $(PLDLFLAGS) $*.c
208 all: makefile miniperl $(private) $(plextract) $(public) $(dynamic_ext)
209 @echo " "; echo " Everything is up to date."
211 translators: miniperl lib/Config.pm FORCE
212 @echo " "; echo " Making x2p stuff"; cd x2p; $(MAKE) all
214 utilities: miniperl lib/Config.pm FORCE
215 @echo " "; echo " Making utilities"; cd utils; $(MAKE) all
218 # This is now done by installman only if you actually want the man pages.
219 # @echo " "; echo " Making docs"; cd pod; $(MAKE) all;
221 # Phony target to force checking subdirectories.
222 # Apparently some makes require an action for the FORCE target.
226 # The $& notation tells Sequent machines that it can do a parallel make,
227 # and is harmless otherwise.
228 # The miniperl -w -MExporter line is a basic cheap test to catch errors
229 # before make goes on to run preplibrary and then MakeMaker on extensions.
230 # This is very handy because later errors are often caused by miniperl
231 # build problems but that's not obvious to the novice.
232 # The Module used here must not depend on Config or any extensions.
234 miniperl: $& miniperlmain$(OBJ_EXT) $(perllib)
235 $(CC) $(LARGE) $(CLDFLAGS) -o miniperl miniperlmain$(OBJ_EXT) $(perllib) $(libs)
236 @./miniperl -w -Ilib -MExporter -e 0 || $(MAKE) minitest
238 miniperlmain$(OBJ_EXT): miniperlmain.c
239 $(CCCMD) $(PLDLFLAGS) $*.c
241 perlmain.c: miniperlmain.c config.sh makefile $(static_ext_autoinit)
242 sh writemain $(DYNALOADER) $(static_ext) > tmp
243 sh mv-if-diff tmp perlmain.c
245 perlmain$(OBJ_EXT): perlmain.c
246 $(CCCMD) $(PLDLFLAGS) $*.c
248 # The file ext.libs is a list of libraries that must be linked in
249 # for static extensions, e.g. -lm -lgdbm, etc. The individual
250 # static extension Makefile's add to it.
251 ext.libs: $(static_ext)
252 -@test -f ext.libs || touch ext.libs
254 perl: $& perlmain$(OBJ_EXT) $(perllib) $(DYNALOADER) $(static_ext) ext.libs
255 $(SHRPENV) $(CC) $(LARGE) $(CLDFLAGS) $(CCDLFLAGS) -o perl perlmain$(OBJ_EXT) $(perllib) $(DYNALOADER) $(static_ext) `cat ext.libs` $(libs)
257 pureperl: $& perlmain$(OBJ_EXT) $(perllib) $(DYNALOADER) $(static_ext) ext.libs
258 purify $(CC) $(LARGE) $(CLDFLAGS) $(CCDLFLAGS) -o pureperl perlmain$(OBJ_EXT) $(perllib) $(DYNALOADER) $(static_ext) `cat ext.libs` $(libs)
260 quantperl: $& perlmain$(OBJ_EXT) $(perllib) $(DYNALOADER) $(static_ext) ext.libs
261 quantify $(CC) $(LARGE) $(CLDFLAGS) $(CCDLFLAGS) -o quantperl perlmain$(OBJ_EXT) $(perllib) $(DYNALOADER) $(static_ext) `cat ext.libs` $(libs)
263 $(perllib): $& perl$(OBJ_EXT) $(obj)
268 $spitshell >>Makefile <<'!NO!SUBS!'
269 $(LD) $(LDDLFLAGS) -o $@ perl$(OBJ_EXT) $(obj)
273 if test -r $osname/Makefile.SHs ; then
274 . $osname/Makefile.SHs
275 $spitshell >>Makefile <<!GROK!THIS!
277 Makefile: $osname/Makefile.SHs
281 echo "Could not find $osname/Makefile.SH! Skipping target \$(perllib) in Makefile!"
285 $spitshell >>Makefile <<'!NO!SUBS!'
287 $(AR) rcu $(perllib) perl$(OBJ_EXT) $(obj)
288 @$(ranlib) $(perllib)
293 $spitshell >>Makefile <<'!NO!SUBS!'
295 # This version, if specified in Configure, does ONLY those scripts which need
296 # set-id emulation. Suidperl must be setuid root. It contains the "taint"
297 # checks as well as the special code to validate that the script in question
298 # has been invoked correctly.
300 suidperl: $& sperl$(OBJ_EXT) perlmain$(OBJ_EXT) $(perllib) $(DYNALOADER) $(static_ext) ext.libs
301 $(CC) $(LARGE) $(CLDFLAGS) $(CCDLFLAGS) -o suidperl perlmain$(OBJ_EXT) sperl$(OBJ_EXT) $(perllib) $(DYNALOADER) $(static_ext) `cat ext.libs` $(libs)
303 sperl$(OBJ_EXT): perl.c perly.h patchlevel.h $(h)
305 $(LNS) perl.c sperl.c
306 $(CCCMD) -DIAMSUID sperl.c
309 # We have to call our ./makedir because Ultrix 4.3 make can't handle the line
310 # test -d lib/auto || mkdir lib/auto
312 preplibrary: miniperl lib/Config.pm $(plextract)
313 @sh ./makedir lib/auto
314 @echo " AutoSplitting perl library"
315 @./miniperl -Ilib -e 'use AutoSplit; \
316 autosplit_lib_modules(@ARGV)' lib/*.pm lib/*/*.pm
318 # Take care to avoid modifying lib/Config.pm without reason
319 lib/Config.pm: config.sh miniperl
320 ./miniperl configpm tmp
321 sh mv-if-diff tmp lib/Config.pm
323 lib/ExtUtils/Miniperl.pm: miniperlmain.c miniperl minimod.pl lib/Config.pm
324 ./miniperl minimod.pl > tmp && mv tmp $@
326 $(plextract): miniperl lib/Config.pm
327 ./miniperl -Ilib $@.PL
329 install: all install.perl install.man
331 install.perl: all installperl
334 install.man: all installman
337 # Not implemented yet.
338 #install.html: all installhtml
341 # I now supply perly.c with the kits, so the following section is
342 # used only if you force byacc to run by saying
344 # Since we patch up the byacc output, the perly.fixer script needs
345 # to run with precisely the same version of byacc as I use. You
346 # normally shouldn't remake perly.[ch].
349 @ echo 'Expect' 130 shift/reduce and 1 reduce/reduce conflict
351 sh $(shellflags) ./perly.fixer y.tab.c perly.c
353 echo 'extern YYSTYPE yylval;' >>perly.h
354 - perl vms/vms_yfix.pl perly.c perly.h vms/perly_c.vms vms/perly_h.vms
356 # We don't want to regenerate perly.c and perly.h, but they might
357 # appear out-of-date after a patch is applied or a new distribution is
365 # The following three header files are generated automatically
366 # keywords.h: keywords.pl
367 # opcode.h: opcode.pl
368 # embed.h: embed.pl global.sym interp.sym
369 # The correct versions should be already supplied with the perl kit,
370 # in case you don't have perl available.
371 # To force them to run, type
379 # Names added to $(dynamic_ext) or $(static_ext) will automatically
380 # get built. There should ordinarily be no need to change any of
381 # this part of makefile.
383 # The dummy dependency is a place holder in case $(dynamic_ext) or
384 # $(static_ext) is empty.
386 # DynaLoader may be needed for extensions that use Makefile.PL.
388 $(DYNALOADER): miniperl preplibrary FORCE
389 @sh ext/util/make_ext static $@ LIBPERL_A=$(perllib)
391 d_dummy $(dynamic_ext): miniperl preplibrary $(DYNALOADER) FORCE
392 @sh ext/util/make_ext dynamic $@ LIBPERL_A=$(perllib)
394 s_dummy $(static_ext): miniperl preplibrary $(DYNALOADER) FORCE
395 @sh ext/util/make_ext static $@ LIBPERL_A=$(perllib)
398 rm -f *$(OBJ_EXT) *$(LIB_EXT) all perlmain.c
399 rm -f perl.exp ext.libs
400 -rm perl.export perl.dll perl.libexp perl.map perl.def
401 -cd pod; $(MAKE) clean
402 -cd utils; $(MAKE) clean
403 -cd x2p; $(MAKE) clean
404 -@for x in $(DYNALOADER) $(dynamic_ext) $(static_ext) ; do \
405 sh ext/util/make_ext clean $$x ; \
407 rm -f perl suidperl miniperl $(perllib)
410 -cd os2; rm -f Makefile
411 -cd pod; $(MAKE) realclean
412 -cd utils; $(MAKE) realclean
413 -cd x2p; $(MAKE) realclean
414 -@for x in $(DYNALOADER) $(dynamic_ext) $(static_ext) ; do \
415 sh ext/util/make_ext realclean $$x ; \
417 rm -f *.orig */*.orig *~ */*~ core t/core t/c t/perl
418 rm -rf $(addedbyconf)
419 rm -f $(FIRSTMAKEFILE) $(FIRSTMAKEFILE).old
423 rm -f h2ph.man pstruct
425 @echo "Note that make realclean does not delete config.sh"
428 rm -f config.sh cppstdin
432 # The following lint has practically everything turned on. Unfortunately,
433 # you have to wade through a lot of mumbo jumbo that can't be suppressed.
434 # If the source file has a /*NOSTRICT*/ somewhere, ignore the lint message
438 lint $(lintflags) $(defs) perly.c $(c) > perl.fuzz
440 # Need to unset during recursion to go out of loop
442 MAKEDEPEND = makedepend
444 $(FIRSTMAKEFILE): Makefile $(MAKEDEPEND)
445 $(MAKE) depend MAKEDEPEND=
450 # When done, touch perlmain.c so that it doesn't get remade each time.
453 - test -s perlmain.c && touch perlmain.c
454 cd x2p; $(MAKE) depend
456 # Cannot postpone this until $firstmakefile is ready ;-)
457 makedepend: makedepend.SH config.sh
460 test: miniperl perl preplibrary $(dynamic_ext)
461 - cd t && chmod +x TEST */*.t
462 - cd t && (rm -f perl$(EXE_EXT); $(LNS) ../perl$(EXE_EXT) perl$(EXE_EXT)) && ./perl TEST </dev/tty
465 - cd t && chmod +x TEST */*.t
466 - cd t && (rm -f perl$(EXE_EXT); $(LNS) ../miniperl$(EXE_EXT) perl$(EXE_EXT)) \
467 && ./perl TEST base/*.t comp/*.t cmd/*.t io/*.t op/*.t </dev/tty
470 echo $(c) | tr ' ' '\012' >.clist
473 echo $(h) | tr ' ' '\012' >.hlist
476 echo $(sh) | tr ' ' '\012' >.shlist
479 echo $(pl) | tr ' ' '\012' >.pllist
481 # AUTOMATICALLY GENERATED MAKE DEPENDENCIES--PUT NOTHING BELOW THIS LINE
482 # If this runs make out of memory, delete /usr/include lines.
489 $ln Makefile ../Makefile
492 $rm -f $firstmakefile