Commit | Line | Data |
a5b1c163 |
1 | # |
2 | # Makefile to build perl on Windows NT 64 Bit using Microsoft NMAKE. |
3 | # |
4 | # Building for Itanium requires the latest SDK, a (currently unsupported) |
5 | # native Microsoft IA64 Compiler (13.00.9367.7 for IA-64 or higher), and |
6 | # of course an Itanium box running Windows XP. |
7 | # Quick start: |
8 | # 1) Edit INST_TOP and INST_DRV in this Makefile if necessary. |
9 | # 2) nmake -f Makefile.win64 |
10 | # 3) nmake -f Makefile.win64 test |
11 | # => Currently lib/posix.t 2 and op/64bitint.t 23, 53-55 will fail |
12 | # 4) nmake -f Makefile.win64 install |
13 | # |
14 | # This Configuration eanbles 64 Bit porting warning (/Wp64). Watch out for C4700 |
15 | # warnings when porting addon modules to WIN64, most of them will result in runtime |
16 | # crashes. Remember that most data types remain unchanged on WIN64. Especially long |
17 | # is still 32 Bit. Native 64 Bit datatypes are for example __int64 or size_t. If |
18 | # you really need to add WIN64 specific code use ifdef _WIN64. |
19 | # |
20 | # randolf.werner@sap.com |
21 | |
22 | ## |
23 | ## Make sure you read README.win32 *before* you mess with anything here! |
24 | ## |
25 | ## If you want a configuration that is the same as ActivePerl (see |
26 | ## www.ActiveState.com) make sure you set at least BUILD_FLAVOR below! |
27 | ## |
28 | |
29 | ## |
30 | ## Build configuration. Edit the values below to suit your needs. |
31 | ## |
32 | |
33 | # |
34 | # Set these to wherever you want "nmake install" to put your newly |
35 | # built perl. Setting it to a path with spaces is NOT recommended. |
36 | # |
37 | INST_DRV = c: |
38 | INST_TOP = $(INST_DRV)\perl64 |
39 | |
40 | # |
41 | # uncomment one of the following lines if you are using either |
42 | # Visual C++ 2.x, or Visual C++ 5.x (aka Visual Studio 97) _without_ |
43 | # service pack 3 applied. |
44 | # |
45 | # If you have 5.x SP3 or later, or 6.x, no change is required. |
46 | # |
47 | #CCTYPE = MSVC20 |
48 | #CCTYPE = MSVC_PRE_50SP3 |
49 | |
50 | # |
51 | # set the install locations of the compiler include/libraries. Running |
52 | # VCVARS32.BAT is *required* when using Visual C. Some versions of |
53 | # Visual C earlier than 5.x SP3 don't define MSVCDIR in the environment. |
54 | # If such is the case you may have to set CCHOME explicitly. Spaces in |
55 | # the path name should not be quoted. |
56 | # |
57 | # If you have run VCVARS32.BAT and have VC 5.x SP3 or later, the defaults |
58 | # should just work. |
59 | # |
60 | #CCHOME = f:\msvc20 |
61 | CCHOME = $(MSVCDIR) |
62 | CCINCDIR = $(CCHOME)\include |
63 | CCLIBDIR = $(CCHOME)\lib |
64 | |
65 | # |
66 | # if you have the source for des_fcrypt(), uncomment CRYPT_SRC and make sure |
67 | # the file exists (see README.win32). File should be located in the same |
68 | # directory as this makefile. |
69 | # |
70 | # If you didn't set CRYPT_SRC and if you have des_fcrypt() available in a |
71 | # library, uncomment CRYPT_LIB, and make sure the library exists (see |
72 | # README.win32). Specify the full pathname of the library. |
73 | # |
74 | # If you don't enable one of these, the crypt() builtin will fail to work. |
75 | # (Generally not critical.) |
76 | # |
77 | #CRYPT_SRC = fcrypt.c |
78 | #CRYPT_LIB = fcrypt.lib |
79 | |
80 | # |
81 | # uncomment this option if you want to bulk-enable all the options that |
82 | # ActiveState uses to build their ActivePerl distribution. If you set this, |
83 | # there should be no need to set any of the other options that follow. |
84 | # |
85 | # If you don't enable this, the defaults below will get you the most |
86 | # efficient perl configuration possible that will also be compatible |
87 | # with the build defaults used on Unix platforms. On the other hand, |
88 | # the ActivePerl configuration will get you fork() emulation at the |
89 | # cost of some added bloat. |
90 | # |
91 | #BUILD_FLAVOR = ActivePerl |
92 | |
93 | # |
94 | # uncomment next line if you want debug version of perl (big and slow). |
95 | # If not enabled, we automatically try to use maximum optimization |
96 | # with all compilers that are known to have a working optimizer. |
97 | # |
98 | #CFG = Debug |
99 | |
100 | # |
101 | # Comment this out if you DON'T want your perl installation to be versioned. |
102 | # This means that the new installation will overwrite any files from the |
103 | # old installation at the same INST_TOP location. Leaving it enabled is |
104 | # the safest route, as perl adds the extra version directory to all the |
105 | # locations it installs files to. If you disable it, an alternative |
106 | # versioned installation can be obtained by setting INST_TOP above to a |
107 | # path that includes an arbitrary version string. |
108 | # |
109 | INST_VER = \5.6.1 |
110 | |
111 | # |
112 | # Comment this out if you DON'T want your perl installation to have |
113 | # architecture specific components. This means that architecture- |
114 | # specific files will be installed along with the architecture-neutral |
115 | # files. Leaving it enabled is safer and more flexible, in case you |
116 | # want to build multiple flavors of perl and install them together in |
117 | # the same location. Commenting it out gives you a simpler |
118 | # installation that is easier to understand for beginners. |
119 | # |
120 | INST_ARCH = \$(ARCHNAME) |
121 | |
122 | # |
123 | # uncomment to enable multiple interpreters. This is need for fork() |
124 | # emulation. |
125 | # |
126 | #USE_MULTI = define |
127 | |
128 | # |
129 | # Beginnings of interpreter cloning/threads; still very incomplete. |
130 | # This should be enabled to get the fork() emulation. This needs |
131 | # USE_MULTI as well. |
132 | # |
133 | #USE_ITHREADS = define |
134 | |
135 | # |
136 | # uncomment to enable the implicit "host" layer for all system calls |
137 | # made by perl. This needs USE_MULTI above. This is also needed to |
138 | # get fork(). |
139 | # |
140 | #USE_IMP_SYS = define |
141 | |
142 | # |
143 | # WARNING! This option is deprecated and will eventually go away (enable |
144 | # USE_ITHREADS instead). |
145 | # |
146 | # uncomment to enable threads-capabilities. This is incompatible with |
147 | # USE_ITHREADS, and is only here for people who may have come to rely |
148 | # on the experimental Thread support that was in 5.005. |
149 | # |
150 | #USE_5005THREADS= define |
151 | |
152 | # |
153 | # WARNING! This option is deprecated and will eventually go away (enable |
154 | # USE_MULTI instead). |
155 | # |
156 | # uncomment next line if you want to use the PERL_OBJECT build option. |
157 | # DO NOT ENABLE unless you have legacy code that relies on the C++ |
158 | # CPerlObj class that was available in 5.005. This cannot be enabled |
159 | # if you ask for USE_5005THREADS or USE_MULTI above. |
160 | # |
161 | #USE_OBJECT = define |
162 | |
163 | # |
164 | # uncomment to enable use of PerlCRT.DLL when using the Visual C compiler. |
165 | # It has patches that fix known bugs in older versions of MSVCRT.DLL. |
166 | # This currently requires VC 5.0 with Service Pack 3 or later. |
167 | # Get it from CPAN at http://www.perl.com/CPAN/authors/id/D/DO/DOUGL/ |
168 | # and follow the directions in the package to install. |
169 | # |
170 | # Not recommended if you have VC 6.x and you're not running Windows 9x. |
171 | # |
172 | #USE_PERLCRT = define |
173 | |
174 | # |
175 | # uncomment to enable linking with setargv.obj under the Visual C |
176 | # compiler. Setting this option enables perl to expand wildcards in |
177 | # arguments, but it may be harder to use alternate methods like |
178 | # File::DosGlob that are more powerful, or use perl inside shells |
179 | # that do the expansion for you. This option is supported only |
180 | # with Visual C. |
181 | # |
182 | #USE_SETARGV = define |
183 | |
184 | # |
185 | # set this if you wish to use perl's malloc |
186 | # WARNING: Turning this on/off WILL break binary compatibility with extensions |
187 | # you may have compiled with/without it. Be prepared to recompile all |
188 | # extensions if you change the default. Currently, this cannot be enabled |
189 | # if you ask for USE_IMP_SYS above. |
190 | # |
191 | #PERL_MALLOC = define |
192 | |
193 | # |
194 | # Additional compiler flags can be specified here. |
195 | # |
196 | |
197 | # |
198 | # This should normally be disabled. Adding -DPERL_POLLUTE enables support |
199 | # for old symbols by default, at the expense of extreme pollution. You most |
200 | # probably just want to build modules that won't compile with |
201 | # perl Makefile.PL POLLUTE=1 |
202 | # instead of enabling this. Please report such modules to the respective |
203 | # authors. |
204 | # |
205 | #BUILDOPT = $(BUILDOPT) -DPERL_POLLUTE |
206 | |
207 | # |
208 | # This should normally be disabled. Enabling it will disable the File::Glob |
209 | # implementation of CORE::glob. |
210 | # |
211 | #BUILDOPT = $(BUILDOPT) -DPERL_EXTERNAL_GLOB |
212 | |
213 | # |
214 | # This should normally be disabled. Enabling it causes perl to read scripts |
215 | # in text mode (which is the 5.005 behavior) and will break ByteLoader. |
216 | #BUILDOPT = $(BUILDOPT) -DPERL_TEXTMODE_SCRIPTS |
217 | |
218 | # |
219 | # specify semicolon-separated list of extra directories that modules will |
220 | # look for libraries (spaces in path names need not be quoted) |
221 | # |
222 | EXTRALIBDIRS = |
223 | |
224 | # |
225 | # set this to your email address (perl will guess a value from |
226 | # from your loginname and your hostname, which may not be right) |
227 | # |
228 | #EMAIL = |
229 | |
230 | ## |
231 | ## Build configuration ends. |
232 | ## |
233 | |
234 | ##################### CHANGE THESE ONLY IF YOU MUST ##################### |
235 | |
236 | !IF "$(BUILD_FLAVOR)" == "ActivePerl" |
237 | INST_VER = |
238 | INST_ARCH = |
239 | USE_MULTI = define |
240 | USE_ITHREADS = define |
241 | USE_IMP_SYS = define |
242 | USE_5005THREADS = undef |
243 | USE_OBJECT = undef |
244 | USE_PERLCRT = undef |
245 | USE_SETARGV = |
246 | PERL_MALLOC = undef |
247 | !ENDIF |
248 | |
249 | !IF "$(CRYPT_SRC)$(CRYPT_LIB)" == "" |
250 | D_CRYPT = undef |
251 | !ELSE |
252 | D_CRYPT = define |
253 | CRYPT_FLAG = -DHAVE_DES_FCRYPT |
254 | !ENDIF |
255 | |
256 | !IF "$(USE_OBJECT)" == "define" |
257 | PERL_MALLOC = undef |
258 | USE_5005THREADS = undef |
259 | USE_MULTI = undef |
260 | USE_IMP_SYS = define |
261 | !ENDIF |
262 | |
263 | !IF "$(PERL_MALLOC)" == "" |
264 | PERL_MALLOC = undef |
265 | !ENDIF |
266 | |
267 | !IF "$(USE_5005THREADS)" == "" |
268 | USE_5005THREADS = undef |
269 | !ENDIF |
270 | |
271 | !IF "$(USE_5005THREADS)" == "define" |
272 | USE_ITHREADS = undef |
273 | !ENDIF |
274 | |
275 | !IF "$(USE_IMP_SYS)" == "define" |
276 | PERL_MALLOC = undef |
277 | !ENDIF |
278 | |
279 | !IF "$(CCTYPE)" == "" |
280 | CCTYPE = MSVC60 |
281 | !ENDIF |
282 | |
283 | !IF "$(USE_MULTI)" == "" |
284 | USE_MULTI = undef |
285 | !ENDIF |
286 | |
287 | !IF "$(USE_OBJECT)" == "" |
288 | USE_OBJECT = undef |
289 | !ENDIF |
290 | |
291 | !IF "$(USE_ITHREADS)" == "" |
292 | USE_ITHREADS = undef |
293 | !ENDIF |
294 | |
295 | !IF "$(USE_IMP_SYS)" == "" |
296 | USE_IMP_SYS = undef |
297 | !ENDIF |
298 | |
299 | !IF "$(USE_PERLCRT)" == "" |
300 | USE_PERLCRT = undef |
301 | !ENDIF |
302 | |
303 | !IF "$(USE_IMP_SYS)$(USE_MULTI)$(USE_5005THREADS)$(USE_OBJECT)" == "defineundefundefundef" |
304 | USE_MULTI = define |
305 | !ENDIF |
306 | |
307 | !IF "$(USE_ITHREADS)$(USE_MULTI)$(USE_OBJECT)" == "defineundefundef" |
308 | USE_MULTI = define |
309 | USE_5005THREADS = undef |
310 | !ENDIF |
311 | |
312 | !IF "$(USE_MULTI)$(USE_5005THREADS)$(USE_OBJECT)" != "undefundefundef" |
313 | BUILDOPT = $(BUILDOPT) -DPERL_IMPLICIT_CONTEXT |
314 | !ENDIF |
315 | |
316 | !IF "$(USE_IMP_SYS)" != "undef" |
317 | BUILDOPT = $(BUILDOPT) -DPERL_IMPLICIT_SYS |
318 | !ENDIF |
319 | |
320 | !IF "$(PROCESSOR_ARCHITECTURE)" == "" |
321 | PROCESSOR_ARCHITECTURE = x86 |
322 | !ENDIF |
323 | |
324 | !IF "$(USE_OBJECT)" == "define" |
325 | ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-object |
326 | !ELSE |
327 | !IF "$(USE_5005THREADS)" == "define" |
328 | ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-thread |
329 | !ELSE |
330 | !IF "$(USE_MULTI)" == "define" |
331 | ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-multi |
332 | !ELSE |
333 | ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE) |
334 | !ENDIF |
335 | !ENDIF |
336 | !ENDIF |
337 | |
338 | !IF "$(USE_ITHREADS)" == "define" |
339 | ARCHNAME = $(ARCHNAME)-thread |
340 | !ENDIF |
341 | |
342 | # Visual Studio 98 specific |
343 | !IF "$(CCTYPE)" == "MSVC60" |
344 | # VC 6.0 can load the socket dll on demand. Makes the test suite |
345 | # run in about 10% less time. |
346 | DELAYLOAD = -DELAYLOAD:wsock32.dll -DELAYLOAD:shell32.dll delayimp.lib |
347 | !ENDIF |
348 | |
349 | |
350 | ARCHDIR = ..\lib\$(ARCHNAME) |
351 | COREDIR = ..\lib\CORE |
352 | AUTODIR = ..\lib\auto |
353 | LIBDIR = ..\lib |
354 | EXTDIR = ..\ext |
355 | PODDIR = ..\pod |
356 | EXTUTILSDIR = $(LIBDIR)\ExtUtils |
357 | |
358 | # |
359 | INST_SCRIPT = $(INST_TOP)$(INST_VER)\bin |
360 | INST_BIN = $(INST_SCRIPT)$(INST_ARCH) |
361 | INST_LIB = $(INST_TOP)$(INST_VER)\lib |
362 | INST_ARCHLIB = $(INST_LIB)$(INST_ARCH) |
363 | INST_COREDIR = $(INST_ARCHLIB)\CORE |
364 | INST_POD = $(INST_LIB)\pod |
365 | INST_HTML = $(INST_TOP)$(INST_VER)\html |
366 | |
367 | # |
368 | # Programs to compile, build .lib files and link |
369 | # |
370 | |
371 | CC = cl |
372 | LINK32 = link |
373 | LIB32 = $(LINK32) -lib |
374 | RSC = rc |
375 | |
376 | # |
377 | # Options |
378 | # |
379 | |
380 | INCLUDES = -I$(COREDIR) -I.\include -I. -I.. |
381 | #PCHFLAGS = -Fpc:\temp\vcmoduls.pch -YX |
382 | DEFINES = -DWIN32 -D_CONSOLE -DNO_STRICT $(CRYPT_FLAG) |
383 | LOCDEFS = -DPERLDLL -DPERL_CORE |
384 | SUBSYS = console |
385 | CXX_FLAG = -TP -GX |
386 | |
387 | !IF "$(USE_PERLCRT)" != "define" |
388 | LIBC = msvcrt.lib |
389 | !ELSE |
390 | LIBC = PerlCRT.lib |
391 | !ENDIF |
392 | |
393 | PERLEXE_RES = |
394 | PERLDLL_RES = |
395 | |
396 | !IF "$(CFG)" == "Debug" |
397 | ! IF "$(CCTYPE)" == "MSVC20" |
398 | OPTIMIZE = -DCONSERVATIVE -Wp64 -Od -Op -MD -Z7 -DDEBUGGING |
399 | ! ELSE |
400 | OPTIMIZE = -DCONSERVATIVE -Wp64 -Od -Op -MD -Zi -DDEBUGGING |
401 | ! ENDIF |
402 | LINK_DBG = -debug |
403 | !ELSE |
404 | # -O1 yields smaller code, which turns out to be faster than -O2 |
405 | OPTIMIZE = -DCONSERVATIVE -Wp64 -O2 -Op -MD -Zi -DNDEBUG |
406 | # VC 6.0 seems capable of compiling perl correctly with optimizations |
407 | # enabled. Anything earlier fails tests. |
408 | ! IF "$(CCTYPE)" == "MSVC20" || "$(CCTYPE)" == "MSVC_PRE_50SP3" |
409 | OPTIMIZE = -DCONSERVATIVE -Wp64 -O2 -Op -MD -Zi -DNDEBUG |
410 | ! ENDIF |
411 | LINK_DBG = -debug |
412 | !ENDIF |
413 | |
414 | |
415 | !IF "$(USE_OBJECT)" == "define" |
416 | OPTIMIZE = $(OPTIMIZE) $(CXX_FLAG) |
417 | BUILDOPT = $(BUILDOPT) -DPERL_OBJECT |
418 | !ENDIF |
419 | |
420 | !IF "$(USE_PERLCRT)" != "define" |
421 | BUILDOPT = $(BUILDOPT) |
422 | !ENDIF |
423 | |
424 | LIBBASEFILES = $(CRYPT_LIB) \ |
425 | oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \ |
426 | comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \ |
427 | netapi32.lib uuid.lib wsock32.lib mpr.lib winmm.lib \ |
428 | version.lib odbc32.lib odbccp32.lib |
429 | |
430 | # we add LIBC here, since we may be using PerlCRT.dll |
431 | LIBFILES = $(LIBBASEFILES) $(LIBC) |
432 | |
433 | CFLAGS = -nologo -Gf -W3 $(INCLUDES) $(DEFINES) $(LOCDEFS) \ |
434 | $(PCHFLAGS) $(OPTIMIZE) |
435 | LINK_FLAGS = -nologo -nodefaultlib $(LINK_DBG) \ |
436 | -libpath:"$(INST_COREDIR)" \ |
437 | -machine:$(PROCESSOR_ARCHITECTURE) |
438 | OBJOUT_FLAG = -Fo |
439 | EXEOUT_FLAG = -Fe |
440 | |
441 | CFLAGS_O = $(CFLAGS) $(BUILDOPT) |
442 | |
443 | #################### do not edit below this line ####################### |
444 | ############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ############## |
445 | |
446 | o = .obj |
447 | |
448 | # |
449 | # Rules |
450 | # |
451 | |
452 | .SUFFIXES : .c $(o) .dll .lib .exe .rc .res |
453 | |
454 | .c$(o): |
455 | $(CC) -c -I$(<D) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $< |
456 | |
457 | .y.c: |
458 | $(NOOP) |
459 | |
460 | $(o).dll: |
461 | $(LINK32) -dll -subsystem:windows -implib:$(*B).lib -def:$(*B).def \ |
462 | -out:$@ $(LINK_FLAGS) $(LIBFILES) $< $(LIBPERL) |
463 | |
464 | .rc.res: |
465 | $(RSC) -i.. $< |
466 | |
467 | # |
468 | # various targets |
469 | PERLIMPLIB = ..\perl56.lib |
470 | PERLDLL = ..\perl56.dll |
471 | |
472 | MINIPERL = ..\miniperl.exe |
473 | MINIDIR = .\mini |
474 | PERLEXE = ..\perl.exe |
475 | WPERLEXE = ..\wperl.exe |
476 | GLOBEXE = ..\perlglob.exe |
477 | CONFIGPM = ..\lib\Config.pm |
478 | MINIMOD = ..\lib\ExtUtils\Miniperl.pm |
479 | X2P = ..\x2p\a2p.exe |
480 | |
481 | PL2BAT = bin\pl2bat.pl |
482 | GLOBBAT = bin\perlglob.bat |
483 | |
484 | UTILS = \ |
485 | ..\utils\h2ph \ |
486 | ..\utils\splain \ |
487 | ..\utils\dprofpp \ |
488 | ..\utils\perlbug \ |
489 | ..\utils\pl2pm \ |
490 | ..\utils\c2ph \ |
491 | ..\utils\h2xs \ |
492 | ..\utils\perldoc \ |
493 | ..\utils\perlcc \ |
494 | ..\pod\checkpods \ |
495 | ..\pod\pod2html \ |
496 | ..\pod\pod2latex \ |
497 | ..\pod\pod2man \ |
498 | ..\pod\pod2text \ |
499 | ..\pod\pod2usage \ |
500 | ..\pod\podchecker \ |
501 | ..\pod\podselect \ |
502 | ..\x2p\find2perl \ |
503 | ..\x2p\s2p \ |
504 | bin\exetype.pl \ |
505 | bin\runperl.pl \ |
506 | bin\pl2bat.pl \ |
507 | bin\perlglob.pl \ |
508 | bin\search.pl |
509 | |
510 | MAKE = nmake -nologo |
511 | |
512 | CFGSH_TMPL = config.win64 |
513 | CFGH_TMPL = config_H.win64 |
514 | |
515 | XCOPY = xcopy /f /r /i /d |
516 | RCOPY = xcopy /f /r /i /e /d |
517 | NOOP = @echo |
518 | NULL = |
519 | |
520 | # |
521 | # filenames given to xsubpp must have forward slashes (since it puts |
522 | # full pathnames in #line strings) |
523 | XSUBPP = ..\$(MINIPERL) -I..\..\lib ..\$(EXTUTILSDIR)\xsubpp \ |
524 | -C++ -prototypes |
525 | |
526 | MICROCORE_SRC = \ |
527 | ..\av.c \ |
528 | ..\deb.c \ |
529 | ..\doio.c \ |
530 | ..\doop.c \ |
531 | ..\dump.c \ |
532 | ..\globals.c \ |
533 | ..\gv.c \ |
534 | ..\hv.c \ |
535 | ..\mg.c \ |
536 | ..\op.c \ |
537 | ..\perl.c \ |
538 | ..\perlapi.c \ |
539 | ..\perly.c \ |
540 | ..\pp.c \ |
541 | ..\pp_ctl.c \ |
542 | ..\pp_hot.c \ |
543 | ..\pp_sys.c \ |
544 | ..\regcomp.c \ |
545 | ..\regexec.c \ |
546 | ..\run.c \ |
547 | ..\scope.c \ |
548 | ..\sv.c \ |
549 | ..\taint.c \ |
550 | ..\toke.c \ |
551 | ..\universal.c \ |
552 | ..\utf8.c \ |
553 | ..\util.c \ |
554 | ..\xsutils.c |
555 | |
556 | EXTRACORE_SRC = $(EXTRACORE_SRC) perllib.c |
557 | |
558 | !IF "$(PERL_MALLOC)" == "define" |
559 | EXTRACORE_SRC = $(EXTRACORE_SRC) ..\malloc.c |
560 | !ENDIF |
561 | |
562 | !IF "$(USE_OBJECT)" != "define" |
563 | EXTRACORE_SRC = $(EXTRACORE_SRC) ..\perlio.c |
564 | !ENDIF |
565 | |
566 | WIN32_SRC = \ |
567 | .\win32.c \ |
568 | .\win32sck.c \ |
569 | .\win32thread.c |
570 | |
571 | !IF "$(CRYPT_SRC)" != "" |
572 | WIN32_SRC = $(WIN32_SRC) .\$(CRYPT_SRC) |
573 | !ENDIF |
574 | |
575 | DLL_SRC = $(DYNALOADER).c |
576 | |
577 | X2P_SRC = \ |
578 | ..\x2p\a2p.c \ |
579 | ..\x2p\hash.c \ |
580 | ..\x2p\str.c \ |
581 | ..\x2p\util.c \ |
582 | ..\x2p\walk.c |
583 | |
584 | CORE_NOCFG_H = \ |
585 | ..\av.h \ |
586 | ..\cop.h \ |
587 | ..\cv.h \ |
588 | ..\dosish.h \ |
589 | ..\embed.h \ |
590 | ..\form.h \ |
591 | ..\gv.h \ |
592 | ..\handy.h \ |
593 | ..\hv.h \ |
594 | ..\iperlsys.h \ |
595 | ..\mg.h \ |
596 | ..\nostdio.h \ |
597 | ..\op.h \ |
598 | ..\opcode.h \ |
599 | ..\perl.h \ |
600 | ..\perlapi.h \ |
601 | ..\perlsdio.h \ |
602 | ..\perlsfio.h \ |
603 | ..\perly.h \ |
604 | ..\pp.h \ |
605 | ..\proto.h \ |
606 | ..\regexp.h \ |
607 | ..\scope.h \ |
608 | ..\sv.h \ |
609 | ..\thread.h \ |
610 | ..\unixish.h \ |
611 | ..\utf8.h \ |
612 | ..\util.h \ |
613 | ..\warnings.h \ |
614 | ..\XSUB.h \ |
615 | ..\EXTERN.h \ |
616 | ..\perlvars.h \ |
617 | ..\intrpvar.h \ |
618 | ..\thrdvar.h \ |
619 | .\include\dirent.h \ |
620 | .\include\netdb.h \ |
621 | .\include\sys\socket.h \ |
622 | .\win32.h |
623 | |
624 | CORE_H = $(CORE_NOCFG_H) .\config.h |
625 | |
626 | MICROCORE_OBJ = $(MICROCORE_SRC:.c=.obj) |
627 | CORE_OBJ = $(MICROCORE_OBJ) $(EXTRACORE_SRC:.c=.obj) |
628 | WIN32_OBJ = $(WIN32_SRC:.c=.obj) |
629 | MINICORE_OBJ = $(MICROCORE_OBJ:..\=.\mini\) \ |
630 | $(MINIDIR)\miniperlmain$(o) \ |
631 | $(MINIDIR)\perlio$(o) |
632 | MINIWIN32_OBJ = $(WIN32_OBJ:.\=.\mini\) |
633 | MINI_OBJ = $(MINICORE_OBJ) $(MINIWIN32_OBJ) |
634 | DLL_OBJ = $(DLL_SRC:.c=.obj) |
635 | X2P_OBJ = $(X2P_SRC:.c=.obj) |
636 | |
637 | PERLDLL_OBJ = $(CORE_OBJ) |
638 | PERLEXE_OBJ = perlmain$(o) |
639 | |
640 | PERLDLL_OBJ = $(PERLDLL_OBJ) $(WIN32_OBJ) $(DLL_OBJ) |
641 | #PERLEXE_OBJ = $(PERLEXE_OBJ) $(WIN32_OBJ) $(DLL_OBJ) |
642 | |
643 | !IF "$(USE_SETARGV)" != "" |
644 | SETARGV_OBJ = setargv$(o) |
645 | !ENDIF |
646 | |
647 | DYNAMIC_EXT = Socket IO Fcntl Opcode SDBM_File POSIX attrs Thread B re \ |
648 | Data/Dumper Devel/Peek ByteLoader Devel/DProf File/Glob \ |
649 | Sys/Hostname |
650 | STATIC_EXT = DynaLoader |
651 | NONXS_EXT = Errno |
652 | |
653 | DYNALOADER = $(EXTDIR)\DynaLoader\DynaLoader |
654 | SOCKET = $(EXTDIR)\Socket\Socket |
655 | FCNTL = $(EXTDIR)\Fcntl\Fcntl |
656 | OPCODE = $(EXTDIR)\Opcode\Opcode |
657 | SDBM_FILE = $(EXTDIR)\SDBM_File\SDBM_File |
658 | IO = $(EXTDIR)\IO\IO |
659 | POSIX = $(EXTDIR)\POSIX\POSIX |
660 | ATTRS = $(EXTDIR)\attrs\attrs |
661 | THREAD = $(EXTDIR)\Thread\Thread |
662 | B = $(EXTDIR)\B\B |
663 | RE = $(EXTDIR)\re\re |
664 | DUMPER = $(EXTDIR)\Data\Dumper\Dumper |
665 | ERRNO = $(EXTDIR)\Errno\Errno |
666 | PEEK = $(EXTDIR)\Devel\Peek\Peek |
667 | BYTELOADER = $(EXTDIR)\ByteLoader\ByteLoader |
668 | DPROF = $(EXTDIR)\Devel\DProf\DProf |
669 | GLOB = $(EXTDIR)\File\Glob\Glob |
670 | HOSTNAME = $(EXTDIR)\Sys\Hostname\Hostname |
671 | |
672 | SOCKET_DLL = $(AUTODIR)\Socket\Socket.dll |
673 | FCNTL_DLL = $(AUTODIR)\Fcntl\Fcntl.dll |
674 | OPCODE_DLL = $(AUTODIR)\Opcode\Opcode.dll |
675 | SDBM_FILE_DLL = $(AUTODIR)\SDBM_File\SDBM_File.dll |
676 | IO_DLL = $(AUTODIR)\IO\IO.dll |
677 | POSIX_DLL = $(AUTODIR)\POSIX\POSIX.dll |
678 | ATTRS_DLL = $(AUTODIR)\attrs\attrs.dll |
679 | THREAD_DLL = $(AUTODIR)\Thread\Thread.dll |
680 | B_DLL = $(AUTODIR)\B\B.dll |
681 | DUMPER_DLL = $(AUTODIR)\Data\Dumper\Dumper.dll |
682 | PEEK_DLL = $(AUTODIR)\Devel\Peek\Peek.dll |
683 | RE_DLL = $(AUTODIR)\re\re.dll |
684 | BYTELOADER_DLL = $(AUTODIR)\ByteLoader\ByteLoader.dll |
685 | DPROF_DLL = $(AUTODIR)\Devel\DProf\DProf.dll |
686 | GLOB_DLL = $(AUTODIR)\File\Glob\Glob.dll |
687 | HOSTNAME_DLL = $(AUTODIR)\Sys\Hostname\Hostname.dll |
688 | |
689 | ERRNO_PM = $(LIBDIR)\Errno.pm |
690 | |
691 | EXTENSION_C = \ |
692 | $(SOCKET).c \ |
693 | $(FCNTL).c \ |
694 | $(OPCODE).c \ |
695 | $(SDBM_FILE).c \ |
696 | $(IO).c \ |
697 | $(POSIX).c \ |
698 | $(ATTRS).c \ |
699 | $(THREAD).c \ |
700 | $(RE).c \ |
701 | $(DUMPER).c \ |
702 | $(PEEK).c \ |
703 | $(B).c \ |
704 | $(BYTELOADER).c \ |
705 | $(DPROF).c \ |
706 | $(GLOB).c \ |
707 | $(HOSTNAME).c |
708 | |
709 | EXTENSION_DLL = \ |
710 | $(SOCKET_DLL) \ |
711 | $(FCNTL_DLL) \ |
712 | $(OPCODE_DLL) \ |
713 | $(SDBM_FILE_DLL)\ |
714 | $(IO_DLL) \ |
715 | $(POSIX_DLL) \ |
716 | $(ATTRS_DLL) \ |
717 | $(DUMPER_DLL) \ |
718 | $(PEEK_DLL) \ |
719 | $(B_DLL) \ |
720 | $(RE_DLL) \ |
721 | $(THREAD_DLL) \ |
722 | $(BYTELOADER_DLL) \ |
723 | $(DPROF_DLL) \ |
724 | $(GLOB_DLL) \ |
725 | $(HOSTNAME_DLL) |
726 | |
727 | EXTENSION_PM = \ |
728 | $(ERRNO_PM) |
729 | |
730 | POD2HTML = $(PODDIR)\pod2html |
731 | POD2MAN = $(PODDIR)\pod2man |
732 | POD2LATEX = $(PODDIR)\pod2latex |
733 | POD2TEXT = $(PODDIR)\pod2text |
734 | |
735 | CFG_VARS = \ |
736 | "INST_DRV=$(INST_DRV)" \ |
737 | "INST_TOP=$(INST_TOP)" \ |
738 | "INST_VER=$(INST_VER)" \ |
739 | "INST_ARCH=$(INST_ARCH)" \ |
740 | "archname=$(ARCHNAME)" \ |
741 | "cc=$(CC)" \ |
742 | "ccflags=-nologo $(OPTIMIZE:"=\") $(DEFINES) $(BUILDOPT)" \ |
743 | "cf_email=$(EMAIL)" \ |
744 | "d_crypt=$(D_CRYPT)" \ |
745 | "d_mymalloc=$(PERL_MALLOC)" \ |
746 | "libs=$(LIBFILES)" \ |
747 | "incpath=$(CCINCDIR:"=\")" \ |
748 | "libperl=$(PERLIMPLIB:..\=)" \ |
749 | "libpth=$(CCLIBDIR:"=\");$(EXTRALIBDIRS:"=\")" \ |
750 | "libc=$(LIBC)" \ |
751 | "make=nmake" \ |
752 | "static_ext=$(STATIC_EXT)" \ |
753 | "dynamic_ext=$(DYNAMIC_EXT)" \ |
754 | "nonxs_ext=$(NONXS_EXT)" \ |
755 | "use5005threads=$(USE_5005THREADS)" \ |
756 | "useithreads=$(USE_ITHREADS)" \ |
757 | "usethreads=$(USE_5005THREADS)" \ |
758 | "usemultiplicity=$(USE_MULTI)" \ |
759 | "LINK_FLAGS=$(LINK_FLAGS:"=\")" \ |
760 | "optimize=$(OPTIMIZE:"=\")" |
761 | |
762 | # |
763 | # Top targets |
764 | # |
765 | |
766 | all : .\config.h $(GLOBEXE) $(MINIMOD) $(CONFIGPM) $(PERLEXE) \ |
767 | $(X2P) $(EXTENSION_DLL) $(EXTENSION_PM) |
768 | |
769 | $(DYNALOADER)$(o) : $(DYNALOADER).c $(CORE_H) $(EXTDIR)\DynaLoader\dlutils.c |
770 | |
771 | #------------------------------------------------------------ |
772 | |
773 | $(GLOBEXE) : perlglob$(o) |
774 | $(LINK32) $(LINK_FLAGS) $(LIBFILES) -out:$@ -subsystem:$(SUBSYS) \ |
775 | perlglob$(o) setargv$(o) |
776 | |
777 | perlglob$(o) : perlglob.c |
778 | |
779 | config.w32 : $(CFGSH_TMPL) |
780 | copy $(CFGSH_TMPL) config.w32 |
781 | |
782 | .\config.h : $(CFGH_TMPL) |
783 | -del /f config.h |
784 | copy $(CFGH_TMPL) config.h |
785 | |
786 | ..\config.sh : config.w32 $(MINIPERL) config_sh.PL |
787 | $(MINIPERL) -I..\lib config_sh.PL $(CFG_VARS) config.w32 > ..\config.sh |
788 | |
789 | # this target is for when changes to the main config.sh happen |
790 | # edit config.{b,v,g}c and make this target once for each supported |
791 | # compiler (e.g. `dmake CCTYPE=BORLAND regen_config_h`) |
792 | regen_config_h: |
793 | perl config_sh.PL $(CFG_VARS) $(CFGSH_TMPL) > ..\config.sh |
794 | cd .. |
795 | -del /f perl.exe |
796 | perl configpm |
797 | cd win32 |
798 | -del /f $(CFGH_TMPL) |
799 | -mkdir $(COREDIR) |
800 | -perl -I..\lib config_h.PL "INST_VER=$(INST_VER)" |
801 | rename config.h $(CFGH_TMPL) |
802 | |
803 | $(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl |
804 | cd .. && miniperl configpm |
805 | if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL) |
806 | $(XCOPY) ..\*.h $(COREDIR)\*.* |
807 | $(XCOPY) *.h $(COREDIR)\*.* |
808 | $(XCOPY) ..\ext\re\re.pm $(LIBDIR)\*.* |
809 | $(RCOPY) include $(COREDIR)\*.* |
810 | $(MINIPERL) -I..\lib config_h.PL "INST_VER=$(INST_VER)" \ |
811 | || $(MAKE) /$(MAKEFLAGS) $(CONFIGPM) |
812 | |
813 | $(MINIPERL) : $(MINIDIR) $(MINI_OBJ) |
814 | $(LINK32) -subsystem:console -out:$@ @<< |
815 | $(LINK_FLAGS) $(LIBFILES) $(MINI_OBJ) |
816 | << |
817 | |
818 | $(MINIDIR) : |
819 | if not exist "$(MINIDIR)" mkdir "$(MINIDIR)" |
820 | |
821 | $(MINICORE_OBJ) : $(CORE_NOCFG_H) |
822 | $(CC) -c $(CFLAGS) -DPERL_EXTERNAL_GLOB $(OBJOUT_FLAG)$@ ..\$(*F).c |
823 | |
824 | $(MINIWIN32_OBJ) : $(CORE_NOCFG_H) |
825 | $(CC) -c $(CFLAGS) $(OBJOUT_FLAG)$@ $(*F).c |
826 | |
827 | # -DPERL_IMPLICIT_SYS needs C++ for perllib.c |
828 | # This is the only file that depends on perlhost.h, vmem.h, and vdir.h |
829 | !IF "$(USE_IMP_SYS)$(USE_OBJECT)" == "defineundef" |
830 | perllib$(o) : perllib.c .\perlhost.h .\vdir.h .\vmem.h |
831 | $(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c |
832 | !ENDIF |
833 | |
834 | # 1. we don't want to rebuild miniperl.exe when config.h changes |
835 | # 2. we don't want to rebuild miniperl.exe with non-default config.h |
836 | $(MINI_OBJ) : $(CORE_NOCFG_H) |
837 | |
838 | $(WIN32_OBJ) : $(CORE_H) |
839 | $(CORE_OBJ) : $(CORE_H) |
840 | $(DLL_OBJ) : $(CORE_H) |
841 | $(X2P_OBJ) : $(CORE_H) |
842 | |
843 | perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym ..\pp.sym ..\makedef.pl |
844 | $(MINIPERL) -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) $(BUILDOPT) \ |
845 | CCTYPE=$(CCTYPE) > perldll.def |
846 | |
847 | $(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES) |
848 | $(LINK32) -dll -def:perldll.def -base:0x28000000 -out:$@ @<< |
849 | $(LINK_FLAGS) $(DELAYLOAD) $(LIBFILES) $(PERLDLL_OBJ) $(PERLDLL_RES) |
850 | << |
851 | $(XCOPY) $(PERLIMPLIB) $(COREDIR) |
852 | |
853 | $(MINIMOD) : $(MINIPERL) ..\minimod.pl |
854 | cd .. && miniperl minimod.pl > lib\ExtUtils\Miniperl.pm |
855 | |
856 | ..\x2p\a2p$(o) : ..\x2p\a2p.c |
857 | $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\a2p.c |
858 | |
859 | ..\x2p\hash$(o) : ..\x2p\hash.c |
860 | $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\hash.c |
861 | |
862 | ..\x2p\str$(o) : ..\x2p\str.c |
863 | $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\str.c |
864 | |
865 | ..\x2p\util$(o) : ..\x2p\util.c |
866 | $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\util.c |
867 | |
868 | ..\x2p\walk$(o) : ..\x2p\walk.c |
869 | $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\walk.c |
870 | |
871 | $(X2P) : $(MINIPERL) $(X2P_OBJ) |
872 | $(MINIPERL) ..\x2p\find2perl.PL |
873 | $(MINIPERL) ..\x2p\s2p.PL |
874 | $(LINK32) -subsystem:console -out:$@ @<< |
875 | $(LINK_FLAGS) $(LIBFILES) $(X2P_OBJ) |
876 | << |
877 | |
878 | perlmain.c : runperl.c |
879 | copy runperl.c perlmain.c |
880 | |
881 | perlmain$(o) : perlmain.c |
882 | $(CC) $(CFLAGS_O) -UPERLDLL $(OBJOUT_FLAG)$@ -c perlmain.c |
883 | |
884 | $(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES) |
885 | $(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(LINK_FLAGS) \ |
886 | $(LIBFILES) $(PERLEXE_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB) $(PERLEXE_RES) |
887 | copy $(PERLEXE) $(WPERLEXE) |
888 | $(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS |
889 | copy splittree.pl .. |
890 | $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR) |
891 | |
892 | $(DYNALOADER).c: $(MINIPERL) $(EXTDIR)\DynaLoader\dl_win32.xs $(CONFIGPM) |
893 | if not exist $(AUTODIR) mkdir $(AUTODIR) |
894 | cd $(EXTDIR)\$(*B) |
895 | ..\$(MINIPERL) -I..\..\lib $(*B)_pm.PL |
896 | ..\$(MINIPERL) -I..\..\lib XSLoader_pm.PL |
897 | cd ..\..\win32 |
898 | $(XCOPY) $(EXTDIR)\$(*B)\$(*B).pm $(LIBDIR)\$(NULL) |
899 | $(XCOPY) $(EXTDIR)\$(*B)\XSLoader.pm $(LIBDIR)\$(NULL) |
900 | cd $(EXTDIR)\$(*B) |
901 | $(XSUBPP) dl_win32.xs > $(*B).c |
902 | cd ..\..\win32 |
903 | |
904 | $(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs |
905 | copy dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs |
906 | |
907 | $(DUMPER_DLL): $(PERLEXE) $(DUMPER).xs |
908 | cd $(EXTDIR)\Data\$(*B) |
909 | ..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl |
910 | $(MAKE) |
911 | cd ..\..\..\win32 |
912 | |
913 | $(DPROF_DLL): $(PERLEXE) $(DPROF).xs |
914 | cd $(EXTDIR)\Devel\$(*B) |
915 | ..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl |
916 | $(MAKE) |
917 | cd ..\..\..\win32 |
918 | |
919 | $(GLOB_DLL): $(PERLEXE) $(GLOB).xs |
920 | cd $(EXTDIR)\File\$(*B) |
921 | ..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl |
922 | $(MAKE) |
923 | cd ..\..\..\win32 |
924 | |
925 | $(PEEK_DLL): $(PERLEXE) $(PEEK).xs |
926 | cd $(EXTDIR)\Devel\$(*B) |
927 | ..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl |
928 | $(MAKE) |
929 | cd ..\..\..\win32 |
930 | |
931 | $(RE_DLL): $(PERLEXE) $(RE).xs |
932 | cd $(EXTDIR)\$(*B) |
933 | ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl |
934 | $(MAKE) |
935 | cd ..\..\win32 |
936 | |
937 | $(B_DLL): $(PERLEXE) $(B).xs |
938 | cd $(EXTDIR)\$(*B) |
939 | ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl |
940 | $(MAKE) |
941 | cd ..\..\win32 |
942 | |
943 | $(THREAD_DLL): $(PERLEXE) $(THREAD).xs |
944 | cd $(EXTDIR)\$(*B) |
945 | ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl |
946 | $(MAKE) |
947 | cd ..\..\win32 |
948 | |
949 | $(ATTRS_DLL): $(PERLEXE) $(ATTRS).xs |
950 | cd $(EXTDIR)\$(*B) |
951 | ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl |
952 | $(MAKE) |
953 | cd ..\..\win32 |
954 | |
955 | $(POSIX_DLL): $(PERLEXE) $(POSIX).xs |
956 | cd $(EXTDIR)\$(*B) |
957 | ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl |
958 | $(MAKE) |
959 | cd ..\..\win32 |
960 | |
961 | $(IO_DLL): $(PERLEXE) $(IO).xs |
962 | cd $(EXTDIR)\$(*B) |
963 | ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl |
964 | $(MAKE) |
965 | cd ..\..\win32 |
966 | |
967 | $(SDBM_FILE_DLL) : $(PERLEXE) $(SDBM_FILE).xs |
968 | cd $(EXTDIR)\$(*B) |
969 | ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl |
970 | $(MAKE) |
971 | cd ..\..\win32 |
972 | |
973 | $(FCNTL_DLL): $(PERLEXE) $(FCNTL).xs |
974 | cd $(EXTDIR)\$(*B) |
975 | ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl |
976 | $(MAKE) |
977 | cd ..\..\win32 |
978 | |
979 | $(OPCODE_DLL): $(PERLEXE) $(OPCODE).xs |
980 | cd $(EXTDIR)\$(*B) |
981 | ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl |
982 | $(MAKE) |
983 | cd ..\..\win32 |
984 | |
985 | $(SOCKET_DLL): $(PERLEXE) $(SOCKET).xs |
986 | cd $(EXTDIR)\$(*B) |
987 | ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl |
988 | $(MAKE) |
989 | cd ..\..\win32 |
990 | |
991 | $(HOSTNAME_DLL): $(PERLEXE) $(HOSTNAME).xs |
992 | cd $(EXTDIR)\Sys\$(*B) |
993 | ..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl |
994 | $(MAKE) |
995 | cd ..\..\..\win32 |
996 | |
997 | $(BYTELOADER_DLL): $(PERLEXE) $(BYTELOADER).xs |
998 | cd $(EXTDIR)\$(*B) |
999 | ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl |
1000 | $(MAKE) |
1001 | cd ..\..\win32 |
1002 | |
1003 | $(ERRNO_PM): $(PERLEXE) $(ERRNO)_pm.PL |
1004 | cd $(EXTDIR)\$(*B) |
1005 | ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl |
1006 | $(MAKE) |
1007 | cd ..\..\win32 |
1008 | |
1009 | doc: $(PERLEXE) |
1010 | $(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=./html \ |
1011 | --podpath=pod:lib:ext:utils --htmlroot="file://$(INST_HTML::=|)" \ |
1012 | --libpod=perlfunc:perlguts:perlvar:perlrun:perlop --recurse |
1013 | |
1014 | utils: $(PERLEXE) $(X2P) |
1015 | cd ..\utils |
1016 | $(MAKE) PERL=$(MINIPERL) |
1017 | cd ..\pod |
1018 | copy ..\README.aix .\perlaix.pod |
1019 | copy ..\README.amiga .\perlamiga.pod |
1020 | copy ..\README.bs2000 .\perlbs2000.pod |
1021 | copy ..\README.cygwin .\perlcygwin.pod |
1022 | copy ..\README.dos .\perldos.pod |
1023 | copy ..\README.epoc .\perlepoc.pod |
1024 | copy ..\README.hpux .\perlhpux.pod |
1025 | copy ..\README.mpeix .\perlmpeix.pod |
1026 | copy ..\README.os2 .\perlos2.pod |
1027 | copy ..\README.os390 .\perlos390.pod |
1028 | copy ..\README.solaris .\perlsolaris.pod |
1029 | copy ..\README.vmesa .\perlvmesa.pod |
1030 | copy ..\vms\perlvms.pod .\perlvms.pod |
1031 | copy ..\README.vos .\perlvos.pod |
1032 | copy ..\README.win32 .\perlwin32.pod |
1033 | $(MAKE) -f ..\win32\pod.mak converters |
1034 | cd ..\win32 |
1035 | $(PERLEXE) $(PL2BAT) $(UTILS) |
1036 | |
1037 | distclean: clean |
1038 | -del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \ |
1039 | $(PERLIMPLIB) ..\miniperl.lib $(MINIMOD) |
1040 | -del /f *.def *.map |
1041 | -del /f $(EXTENSION_DLL) $(EXTENSION_PM) |
1042 | -del /f $(EXTENSION_C) $(DYNALOADER).c $(ERRNO).pm |
1043 | -del /f $(EXTDIR)\DynaLoader\dl_win32.xs $(EXTDIR)\DynaLoader\DynaLoader.pm |
1044 | -del /f $(LIBDIR)\.exists $(LIBDIR)\attrs.pm $(LIBDIR)\DynaLoader.pm |
1045 | -del /f $(LIBDIR)\XSLoader.pm $(EXTDIR)\DynaLoader\XSLoader.pm |
1046 | -del /f $(LIBDIR)\Devel\.exists $(LIBDIR)\File\.exists $(LIBDIR)\Sys\.exists |
1047 | -del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm |
a9bf183d |
1048 | -del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm |
a5b1c163 |
1049 | -del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm |
1050 | -del /f $(LIBDIR)\B.pm $(EXTDIR)\B\defsubs.h $(LIBDIR)\O.pm $(LIBDIR)\re.pm |
1051 | -del /f $(LIBDIR)\Data\Dumper.pm $(LIBDIR)\ByteLoader.pm |
1052 | -del /f $(LIBDIR)\Devel\Peek.pm $(LIBDIR)\Devel\DProf.pm |
1053 | -del /f $(LIBDIR)\File\Glob.pm |
1054 | -if exist $(LIBDIR)\IO rmdir /s /q $(LIBDIR)\IO || rmdir /s $(LIBDIR)\IO |
1055 | -if exist $(LIBDIR)\Thread rmdir /s /q $(LIBDIR)\Thread || rmdir /s $(LIBDIR)\Thread |
1056 | -if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B || rmdir /s $(LIBDIR)\B |
1057 | -if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data || rmdir /s $(LIBDIR)\Data |
1058 | cd $(PODDIR) |
1059 | -del /f *.html *.bat checkpods \ |
1060 | perlaix.pod perlamiga.pod perlbs2000.pod perlcygwin.pod \ |
1061 | perldos.pod perlepoc.pod perlhpux.pod perlmachten.pod \ |
1062 | perlmacos.pod perlmpeix.pod perlos2.pod perlos390.pod \ |
1063 | perlsolaris.pod perlvmesa.pod perlvms.pod perlvos.pod \ |
1064 | perlwin32.pod pod2html pod2latex pod2man pod2text pod2usage \ |
1065 | podchecker podselect |
1066 | cd ..\utils |
1067 | -del /f h2ph splain perlbug pl2pm c2ph h2xs perldoc dprofpp \ |
1068 | *.bat perlcc pstruct |
1069 | cd ..\win32 |
1070 | cd ..\x2p |
1071 | -del /f find2perl s2p |
1072 | -del /f *.bat |
1073 | cd ..\win32 |
1074 | -del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c config.h.new |
1075 | -del /f $(CONFIGPM) |
1076 | -del /f bin\*.bat |
1077 | cd $(EXTDIR) |
1078 | -del /s *.lib *.def *.map *.pdb *.bs Makefile *$(o) pm_to_blib |
1079 | cd ..\win32 |
1080 | -if exist $(AUTODIR) rmdir /s /q $(AUTODIR) || rmdir /s $(AUTODIR) |
1081 | -if exist $(COREDIR) rmdir /s /q $(COREDIR) || rmdir /s $(COREDIR) |
1082 | |
1083 | install : all installbare installhtml |
1084 | |
1085 | installbare : utils |
1086 | $(PERLEXE) ..\installperl |
1087 | if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.* |
1088 | $(XCOPY) $(GLOBEXE) $(INST_BIN)\*.* |
1089 | $(XCOPY) bin\*.bat $(INST_SCRIPT)\*.* |
1090 | |
1091 | installhtml : doc |
1092 | $(RCOPY) html\*.* $(INST_HTML)\*.* |
1093 | |
1094 | inst_lib : $(CONFIGPM) |
1095 | copy splittree.pl .. |
1096 | $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR) |
1097 | $(RCOPY) ..\lib $(INST_LIB)\*.* |
1098 | |
1099 | minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) utils |
1100 | $(XCOPY) $(MINIPERL) ..\t\perl.exe |
1101 | $(XCOPY) $(GLOBEXE) ..\t\$(NULL) |
1102 | attrib -r ..\t\*.* |
1103 | copy test ..\t |
1104 | cd ..\t |
1105 | $(MINIPERL) -I..\lib test base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t |
1106 | cd ..\win32 |
1107 | |
1108 | test-prep : all utils |
1109 | $(XCOPY) $(PERLEXE) ..\t\$(NULL) |
1110 | $(XCOPY) $(PERLDLL) ..\t\$(NULL) |
1111 | $(XCOPY) $(GLOBEXE) ..\t\$(NULL) |
1112 | |
1113 | test : test-prep |
1114 | cd ..\t |
1115 | $(PERLEXE) -I..\lib harness |
1116 | cd ..\win32 |
1117 | |
1118 | test-notty : test-prep |
1119 | set PERL_SKIP_TTY_TEST=1 |
1120 | cd ..\t |
1121 | $(PERLEXE) -I..\lib harness |
1122 | cd ..\win32 |
1123 | |
1124 | test-wide : test-prep |
1125 | set HARNESS_PERL_SWITCHES=-C |
1126 | cd ..\t |
1127 | $(PERLEXE) -I..\lib harness |
1128 | cd ..\win32 |
1129 | |
1130 | test-wide-notty : test-prep |
1131 | set PERL_SKIP_TTY_TEST=1 |
1132 | set HARNESS_PERL_SWITCHES=-C |
1133 | cd ..\t |
1134 | $(PERLEXE) -I..\lib harness |
1135 | cd ..\win32 |
b4a93add |
1136 | |
1137 | _test : |
1138 | $(XCOPY) $(PERLEXE) ..\t\$(NULL) |
1139 | $(XCOPY) $(PERLDLL) ..\t\$(NULL) |
1140 | $(XCOPY) $(GLOBEXE) ..\t\$(NULL) |
1141 | cd ..\t |
1142 | $(PERLEXE) -I..\lib harness |
1143 | cd ..\win32 |
a5b1c163 |
1144 | |
1145 | clean : |
1146 | -@erase miniperlmain$(o) |
1147 | -@erase $(MINIPERL) |
1148 | -@erase perlglob$(o) |
1149 | -@erase perlmain$(o) |
1150 | -@erase config.w32 |
1151 | -@erase /f config.h |
1152 | -@erase $(GLOBEXE) |
1153 | -@erase $(PERLEXE) |
1154 | -@erase $(WPERLEXE) |
1155 | -@erase $(PERLDLL) |
1156 | -@erase $(CORE_OBJ) |
1157 | -if exist $(MINIDIR) rmdir /s /q $(MINIDIR) || rmdir /s $(MINIDIR) |
1158 | -@erase $(WIN32_OBJ) |
1159 | -@erase $(DLL_OBJ) |
1160 | -@erase $(X2P_OBJ) |
1161 | -@erase ..\*$(o) ..\*.lib ..\*.exp *$(o) *.lib *.exp *.res |
1162 | -@erase ..\t\*.exe ..\t\*.dll ..\t\*.bat |
1163 | -@erase ..\x2p\*.exe ..\x2p\*.bat |
1164 | -@erase *.ilk |
1165 | -@erase *.pdb |
1166 | |
1167 | # Handy way to run perlbug -ok without having to install and run the |
1168 | # installed perlbug. We don't re-run the tests here - we trust the user. |
1169 | # Please *don't* use this unless all tests pass. |
1170 | # If you want to report test failures, use "nmake nok" instead. |
1171 | ok: utils |
1172 | $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" |
1173 | |
1174 | okfile: utils |
1175 | $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" -F perl.ok |
1176 | |
1177 | nok: utils |
1178 | $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" |
1179 | |
1180 | nokfile: utils |
1181 | $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" -F perl.nok |