Commit | Line | Data |
37fa004c |
1 | #!/usr/local/bin/perl |
2 | |
3 | use Config; |
4 | use File::Basename qw(&basename &dirname); |
5 | |
6 | # List explicitly here the variables you want Configure to |
7 | # generate. Metaconfig only looks for shell variables, so you |
8 | # have to mention them as if they were shell variables, not |
9 | # %Config entries. Thus you write |
10 | # $startperl |
11 | # to ensure Configure will look for $Config{startperl}. |
12 | |
13 | # This forces PL files to create target in same directory as PL file. |
14 | # This is so that make depend always knows where to find PL derivatives. |
44a8e56a |
15 | chdir dirname($0); |
16 | $file = basename($0, '.PL'); |
774d564b |
17 | $file .= '.com' if $^O eq 'VMS'; |
37fa004c |
18 | |
19 | open OUT,">$file" or die "Can't create $file: $!"; |
20 | |
21 | print "Extracting $file (with variable substitutions)\n"; |
22 | |
23 | # In this section, perl variables will be expanded during extraction. |
24 | # You can use $Config{...} to use Configure variables. |
25 | |
26 | print OUT <<"!GROK!THIS!"; |
5f05dabc |
27 | $Config{startperl} |
28 | eval 'exec $Config{perlpath} -S \$0 \${1+"\$@"}' |
29 | if \$running_under_some_shell; |
37fa004c |
30 | !GROK!THIS! |
31 | |
32 | # In the following, perl variables are not expanded during extraction. |
33 | |
34 | print OUT <<'!NO!SUBS!'; |
35 | |
36 | use Config; |
37fa004c |
37 | use Getopt::Std; |
38 | |
c07a80fd |
39 | BEGIN { |
40 | eval "use Mail::Send;"; |
41 | $::HaveSend = ($@ eq ""); |
42 | eval "use Mail::Util;"; |
43 | $::HaveUtil = ($@ eq ""); |
44 | }; |
45 | |
46 | |
37fa004c |
47 | use strict; |
48 | |
49 | sub paraprint; |
50 | |
c07a80fd |
51 | |
137443ea |
52 | my($Version) = "1.17"; |
c07a80fd |
53 | |
54 | # Changed in 1.06 to skip Mail::Send and Mail::Util if not available. |
a5f75d66 |
55 | # Changed in 1.07 to see more sendmail execs, and added pipe output. |
56 | # Changed in 1.08 to use correct address for sendmail. |
c07a80fd |
57 | # Changed in 1.09 to close the REP file before calling it up in the editor. |
58 | # Also removed some old comments duplicated elsewhere. |
59 | # Changed in 1.10 to run under VMS without Mail::Send; also fixed |
a5f75d66 |
60 | # temp filename generation. |
c07a80fd |
61 | # Changed in 1.11 to clean up some text and removed Mail::Send deactivator. |
a5f75d66 |
62 | # Changed in 1.12 to check for editor errors, make save/send distinction |
63 | # clearer and add $ENV{REPLYTO}. |
84478119 |
64 | # Changed in 1.13 to hopefully make it more difficult to accidentally |
65 | # send mail |
ab3ef367 |
66 | # Changed in 1.14 to make the prompts a little more clear on providing |
67 | # helpful information. Also let file read fail gracefully. |
8ecf1a0c |
68 | # Changed in 1.15 to add warnings to stop people using perlbug for non-bugs. |
69 | # Also report selected environment variables. |
774d564b |
70 | # Changed in 1.16 to include @INC, and allow user to re-edit if no changes. |
137443ea |
71 | # Changed in 1.17 Win32 support added. GSAR 97-04-12 |
c07a80fd |
72 | |
73 | # TODO: Allow the user to re-name the file on mail failure, and |
74 | # make sure failure (transmission-wise) of Mail::Send is |
75 | # accounted for. |
37fa004c |
76 | |
ab3ef367 |
77 | my( $file, $usefile, $cc, $address, $perlbug, $testaddress, $filename, |
37fa004c |
78 | $subject, $from, $verbose, $ed, |
137443ea |
79 | $fh, $me, $Is_MSWin32, $Is_VMS, $msg, $body, $andcc, %REP); |
37fa004c |
80 | |
81 | Init(); |
82 | |
83 | if($::opt_h) { Help(); exit; } |
84 | |
84478119 |
85 | if(!-t STDIN) { |
86 | paraprint <<EOF; |
87 | Please use perlbug interactively. If you want to |
88 | include a file, you can use the -f switch. |
89 | EOF |
90 | die "\n"; |
91 | } |
92 | |
c07a80fd |
93 | if($::opt_d or !-t STDOUT) { Dump(*STDOUT); exit; } |
94 | |
37fa004c |
95 | Query(); |
ab3ef367 |
96 | Edit() unless $usefile; |
37fa004c |
97 | NowWhat(); |
98 | Send(); |
99 | |
100 | exit; |
101 | |
102 | sub Init { |
103 | |
104 | # -------- Setup -------- |
105 | |
137443ea |
106 | $Is_MSWin32 = $^O eq 'MSWin32'; |
84478119 |
107 | $Is_VMS = $^O eq 'VMS'; |
37fa004c |
108 | |
c07a80fd |
109 | getopts("dhva:s:b:f:r:e:SCc:t"); |
37fa004c |
110 | |
111 | |
112 | # This comment is needed to notify metaconfig that we are |
113 | # using the $perladmin, $cf_by, and $cf_time definitions. |
114 | |
115 | |
116 | # -------- Configuration --------- |
117 | |
118 | # perlbug address |
119 | $perlbug = 'perlbug@perl.com'; |
120 | |
121 | # Test address |
122 | $testaddress = 'perlbug-test@perl.com'; |
123 | |
124 | # Target address |
125 | $address = $::opt_a || ($::opt_t ? $testaddress : $perlbug); |
126 | |
127 | # Possible administrator addresses, in order of confidence |
128 | # (Note that cf_email is not mentioned to metaconfig, since |
129 | # we don't really want it. We'll just take it if we have to.) |
130 | $cc = ($::opt_C ? "" : ( |
131 | $::opt_c || $::Config{perladmin} || $::Config{cf_email} || $::Config{cf_by} |
132 | )); |
133 | |
134 | # Users address, used in message and in Reply-To header |
135 | $from = $::opt_r || ""; |
136 | |
137 | # Include verbose configuration information |
138 | $verbose = $::opt_v || 0; |
139 | |
140 | # Subject of bug-report message |
141 | $subject = $::opt_s || ""; |
142 | |
ab3ef367 |
143 | # Send a file |
144 | $usefile = ($::opt_f || 0); |
145 | |
37fa004c |
146 | # File to send as report |
147 | $file = $::opt_f || ""; |
148 | |
149 | # Body of report |
150 | $body = $::opt_b || ""; |
151 | |
152 | # Editor |
ab3ef367 |
153 | $ed = ( $::opt_e || $ENV{VISUAL} || $ENV{EDITOR} || $ENV{EDIT} || |
137443ea |
154 | ($Is_VMS ? "edit/tpu" : $Is_MSWin32 ? "notepad" : "vi") |
ab3ef367 |
155 | ); |
156 | |
37fa004c |
157 | |
158 | # My username |
137443ea |
159 | $me = ($Is_MSWin32 ? $ENV{'USERNAME'} : getpwuid($<)); |
37fa004c |
160 | |
161 | } |
162 | |
163 | |
164 | sub Query { |
165 | |
166 | # Explain what perlbug is |
167 | |
168 | paraprint <<EOF; |
8ecf1a0c |
169 | This program provides an easy way to create a message reporting a bug |
170 | in perl, and e-mail it to $address. It is *NOT* intended for |
54310121 |
171 | sending test messages or simply verifying that perl works, *NOR* is it |
172 | intended for reporting bugs in third-party perl modules. It is *ONLY* |
173 | a means of reporting verifiable problems with the core perl distribution, |
174 | and any solutions to such problems, to the people who maintain perl. |
175 | |
176 | If you're just looking for help with perl, try posting to the Usenet |
177 | newsgroup comp.lang.perl.misc. If you're looking for help with using |
178 | perl with CGI, try posting to comp.infosystems.www.programming.cgi. |
37fa004c |
179 | |
180 | EOF |
181 | |
182 | |
183 | # Prompt for subject of message, if needed |
184 | if(! $subject) { |
185 | paraprint <<EOF; |
186 | First of all, please provide a subject for the |
ab3ef367 |
187 | message. It should be a concise description of |
774d564b |
188 | the bug or problem. "perl bug" or "perl problem" |
189 | is not a concise description. |
37fa004c |
190 | |
191 | EOF |
192 | print "Subject: "; |
193 | |
194 | $subject = <>; |
195 | chop $subject; |
196 | |
197 | my($err)=0; |
198 | while( $subject =~ /^\s*$/ ) { |
199 | print "\nPlease enter a subject: "; |
200 | $subject = <>; |
201 | chop $subject; |
202 | if($err++>5) { |
203 | die "Aborting.\n"; |
204 | } |
205 | } |
206 | } |
207 | |
208 | |
209 | # Prompt for return address, if needed |
210 | if( !$from) { |
211 | |
212 | # Try and guess return address |
c07a80fd |
213 | my($domain); |
214 | |
215 | if($::HaveUtil) { |
216 | $domain = Mail::Util::maildomain(); |
137443ea |
217 | } elsif ($Is_MSWin32) { |
218 | $domain = $ENV{'USERDOMAIN'}; |
c07a80fd |
219 | } elsif ($Is_VMS) { |
220 | require Sys::Hostname; |
221 | $domain = Sys::Hostname::hostname(); |
222 | } else { |
223 | $domain = `hostname`.".".`domainname`; |
224 | $domain =~ s/[\r\n]+//g; |
225 | } |
37fa004c |
226 | |
227 | my($guess); |
228 | |
229 | if( !$domain) { |
230 | $guess = ""; |
bf9e8eaa |
231 | } elsif ($Is_VMS && !$::Config{'d_socket'}) { |
c07a80fd |
232 | $guess = "$domain\:\:$me"; |
37fa004c |
233 | } else { |
c07a80fd |
234 | $guess = "$me\@$domain" if $domain; |
235 | $guess = "$me\@unknown.addresss" unless $domain; |
37fa004c |
236 | } |
a5f75d66 |
237 | |
238 | $guess = $ENV{'REPLYTO'} if defined($ENV{'REPLYTO'}); |
239 | $guess = $ENV{"REPLY-TO"} if defined($ENV{'REPLY-TO'}); |
37fa004c |
240 | |
241 | if( $guess ) { |
242 | paraprint <<EOF; |
243 | |
244 | |
a5f75d66 |
245 | Your e-mail address will be useful if you need to be contacted. If the |
246 | default shown is not your full internet e-mail address, please correct it. |
37fa004c |
247 | |
248 | EOF |
249 | } else { |
250 | paraprint <<EOF; |
251 | |
252 | So that you may be contacted if necessary, please enter |
a5f75d66 |
253 | your full internet e-mail address here. |
37fa004c |
254 | |
255 | EOF |
256 | } |
257 | print "Your address [$guess]: "; |
258 | |
259 | $from = <>; |
260 | chop $from; |
261 | |
262 | if($from eq "") { $from = $guess } |
263 | |
264 | } |
265 | |
266 | #if( $from =~ /^(.*)\@(.*)$/ ) { |
267 | # $mailname = $1; |
268 | # $maildomain = $2; |
269 | #} |
270 | |
271 | if( $from eq $cc or $me eq $cc ) { |
272 | # Try not to copy ourselves |
c07a80fd |
273 | $cc = "yourself"; |
37fa004c |
274 | } |
275 | |
276 | |
277 | # Prompt for administrator address, unless an override was given |
278 | if( !$::opt_C and !$::opt_c ) { |
279 | paraprint <<EOF; |
280 | |
281 | |
282 | A copy of this report can be sent to your local |
283 | perl administrator. If the address is wrong, please |
c07a80fd |
284 | correct it, or enter 'none' or 'yourself' to not send |
285 | a copy. |
37fa004c |
286 | |
287 | EOF |
288 | |
289 | print "Local perl administrator [$cc]: "; |
290 | |
291 | my($entry) = scalar(<>); |
292 | chop $entry; |
293 | |
294 | if($entry ne "") { |
295 | $cc = $entry; |
296 | if($me eq $cc) { $cc = "" } |
297 | } |
298 | |
299 | } |
300 | |
84478119 |
301 | if($cc =~ /^(none|yourself|me|myself|ourselves)$/i) { $cc = "" } |
37fa004c |
302 | |
303 | $andcc = " and $cc" if $cc; |
304 | |
ab3ef367 |
305 | editor: |
306 | |
37fa004c |
307 | # Prompt for editor, if no override is given |
308 | if(! $::opt_e and ! $::opt_f and ! $::opt_b) { |
309 | paraprint <<EOF; |
310 | |
311 | |
c07a80fd |
312 | Now you need to supply the bug report. Try to make |
37fa004c |
313 | the report concise but descriptive. Include any |
ab3ef367 |
314 | relevant detail. If you are reporting something |
315 | that does not work as you think it should, please |
316 | try to include example of both the actual |
317 | result, and what you expected. |
318 | |
319 | Some information about your local |
37fa004c |
320 | perl configuration will automatically be included |
ab3ef367 |
321 | at the end of the report. If you are using any |
322 | unusual version of perl, please try and confirm |
323 | exactly which versions are relevant. |
37fa004c |
324 | |
325 | You will probably want to use an editor to enter |
326 | the report. If "$ed" is the editor you want |
327 | to use, then just press Enter, otherwise type in |
328 | the name of the editor you would like to use. |
329 | |
c07a80fd |
330 | If you would like to use a prepared file, type |
37fa004c |
331 | "file", and you will be asked for the filename. |
332 | |
333 | EOF |
334 | |
335 | print "Editor [$ed]: "; |
336 | |
337 | my($entry) =scalar(<>); |
338 | chop $entry; |
ab3ef367 |
339 | |
340 | $usefile = 0; |
341 | if($entry eq "file") { |
342 | $usefile = 1; |
343 | } elsif($entry ne "") { |
37fa004c |
344 | $ed = $entry; |
345 | } |
346 | } |
347 | |
348 | |
349 | # Generate scratch file to edit report in |
350 | |
c07a80fd |
351 | { |
137443ea |
352 | my($dir) = ($Is_VMS ? 'sys$scratch:' : |
353 | ($Is_MSWin32 and $ENV{'TEMP'} ? $ENV{'TEMP'} : '/tmp/')); |
c07a80fd |
354 | $filename = "bugrep0$$"; |
355 | $filename++ while -e "$dir$filename"; |
356 | $filename = "$dir$filename"; |
357 | } |
37fa004c |
358 | |
359 | |
360 | # Prompt for file to read report from, if needed |
361 | |
ab3ef367 |
362 | if( $usefile and ! $file) { |
363 | filename: |
37fa004c |
364 | paraprint <<EOF; |
365 | |
37fa004c |
366 | What is the name of the file that contains your report? |
367 | |
368 | EOF |
369 | |
370 | print "Filename: "; |
371 | |
372 | my($entry) = scalar(<>); |
373 | chop($entry); |
374 | |
ab3ef367 |
375 | if($entry eq "") { |
376 | paraprint <<EOF; |
377 | |
378 | No filename? I'll let you go back and choose an editor again. |
379 | |
380 | EOF |
381 | goto editor; |
382 | } |
383 | |
37fa004c |
384 | if(!-f $entry or !-r $entry) { |
ab3ef367 |
385 | paraprint <<EOF; |
386 | |
387 | I'm sorry, but I can't read from `$entry'. Maybe you mistyped the name of |
388 | the file? If you don't want to send a file, just enter a blank line and you |
389 | can get back to the editor selection. |
390 | |
391 | EOF |
392 | goto filename; |
37fa004c |
393 | } |
394 | $file = $entry; |
395 | |
396 | } |
397 | |
398 | |
399 | # Generate report |
400 | |
401 | open(REP,">$filename"); |
402 | |
403 | print REP <<EOF; |
404 | This is a bug report for perl from $from, |
405 | generated with the help of perlbug $Version running under perl $]. |
406 | |
407 | EOF |
408 | |
409 | if($body) { |
410 | print REP $body; |
ab3ef367 |
411 | } elsif($usefile) { |
412 | open(F,"<$file") or die "Unable to read report file from `$file': $!\n"; |
37fa004c |
413 | while(<F>) { |
414 | print REP $_ |
415 | } |
416 | close(F); |
417 | } else { |
774d564b |
418 | print REP <<EOF; |
419 | |
420 | ----------------------------------------------------------------- |
421 | [Please enter your report here] |
422 | |
423 | |
424 | |
425 | [Please do not change anything below this line] |
426 | ----------------------------------------------------------------- |
427 | EOF |
37fa004c |
428 | } |
c07a80fd |
429 | |
430 | Dump(*REP); |
431 | close(REP); |
37fa004c |
432 | |
774d564b |
433 | # read in the report template once so that |
434 | # we can track whether the user does any editing. |
435 | # yes, *all* whitespace is ignored. |
436 | open(REP, "<$filename"); |
437 | while (<REP>) { |
438 | s/\s+//g; |
439 | $REP{$_}++; |
440 | } |
441 | close(REP); |
442 | |
c07a80fd |
443 | } |
444 | |
445 | sub Dump { |
446 | local(*OUT) = @_; |
447 | |
448 | print OUT <<EOF; |
37fa004c |
449 | |
774d564b |
450 | --- |
37fa004c |
451 | Site configuration information for perl $]: |
452 | |
453 | EOF |
454 | |
455 | if( $::Config{cf_by} and $::Config{cf_time}) { |
c07a80fd |
456 | print OUT "Configured by $::Config{cf_by} at $::Config{cf_time}.\n\n"; |
37fa004c |
457 | } |
458 | |
c07a80fd |
459 | print OUT Config::myconfig; |
37fa004c |
460 | |
461 | if($verbose) { |
c07a80fd |
462 | print OUT "\nComplete configuration data for perl $]:\n\n"; |
37fa004c |
463 | my($value); |
464 | foreach (sort keys %::Config) { |
465 | $value = $::Config{$_}; |
466 | $value =~ s/'/\\'/g; |
c07a80fd |
467 | print OUT "$_='$value'\n"; |
37fa004c |
468 | } |
469 | } |
8ecf1a0c |
470 | print OUT <<EOF; |
471 | |
774d564b |
472 | --- |
473 | \@INC for perl $]: |
474 | EOF |
475 | for my $i (@INC) { |
476 | print OUT "\t$i\n"; |
477 | } |
478 | |
479 | print OUT <<EOF; |
8ecf1a0c |
480 | |
774d564b |
481 | --- |
8ecf1a0c |
482 | Environment for perl $]: |
483 | EOF |
e860bb06 |
484 | for my $env (sort |
485 | (qw(PATH LD_LIBRARY_PATH |
486 | LANG PERL_BADLANG |
487 | SHELL HOME LOGDIR), |
488 | grep { /^(?:PERL|LC_)/ } keys %ENV)) { |
8ecf1a0c |
489 | print OUT " $env", |
490 | exists $ENV{$env} ? "=$ENV{$env}" : ' (unset)', |
491 | "\n"; |
492 | } |
37fa004c |
493 | } |
494 | |
495 | sub Edit { |
496 | # Edit the report |
ab3ef367 |
497 | |
498 | if($usefile) { |
499 | $usefile = 0; |
500 | paraprint <<EOF; |
501 | |
502 | Please make sure that the name of the editor you want to use is correct. |
503 | |
504 | EOF |
505 | print "Editor [$ed]: "; |
506 | |
507 | my($entry) =scalar(<>); |
508 | chop $entry; |
37fa004c |
509 | |
ab3ef367 |
510 | if($entry ne "") { |
511 | $ed = $entry; |
512 | } |
513 | } |
514 | |
515 | tryagain: |
516 | if(!$usefile and !$body) { |
68dc0745 |
517 | my $sts = system("$ed $filename"); |
518 | if($sts) { |
a5f75d66 |
519 | #print "\nUnable to run editor!\n"; |
520 | paraprint <<EOF; |
521 | |
522 | The editor you chose (`$ed') could apparently not be run! |
523 | Did you mistype the name of your editor? If so, please |
524 | correct it here, otherwise just press Enter. |
525 | |
526 | EOF |
527 | print "Editor [$ed]: "; |
528 | |
529 | my($entry) =scalar(<>); |
530 | chop $entry; |
531 | |
532 | if($entry ne "") { |
533 | $ed = $entry; |
534 | goto tryagain; |
535 | } else { |
536 | |
537 | paraprint <<EOF; |
538 | |
539 | You may want to save your report to a file, so you can edit and mail it |
540 | yourself. |
541 | EOF |
542 | } |
37fa004c |
543 | } |
544 | } |
774d564b |
545 | |
546 | # Check that we have a report that has some, eh, report in it. |
547 | |
548 | my $unseen = 0; |
549 | |
550 | open(REP, "<$filename"); |
551 | # a strange way to check whether any significant editing |
552 | # have been done: check whether any new non-empty lines |
553 | # have been added. Yes, the below code ignores *any* space |
554 | # in *any* line. |
555 | while (<REP>) { |
556 | s/\s+//g; |
557 | $unseen++ if ($_ ne '' and not exists $REP{$_}); |
558 | } |
559 | |
560 | while ($unseen == 0) { |
561 | paraprint <<EOF; |
562 | |
563 | I am sorry but it looks like you did not report anything. |
564 | |
565 | EOF |
566 | print "Action (Retry Edit/Cancel) "; |
567 | my ($action) = scalar(<>); |
568 | if ($action =~ /^[re]/i) { # <R>etry <E>dit |
569 | goto tryagain; |
570 | } elsif ($action =~ /^[cq]/i) { # <C>ancel, <Q>uit |
571 | Cancel(); |
572 | } |
573 | } |
574 | |
575 | } |
576 | |
577 | sub Cancel { |
578 | 1 while unlink($filename); # remove all versions under VMS |
579 | print "\nCancelling.\n"; |
580 | exit(0); |
37fa004c |
581 | } |
582 | |
583 | sub NowWhat { |
584 | |
585 | # Report is done, prompt for further action |
586 | if( !$::opt_S ) { |
587 | while(1) { |
588 | |
589 | paraprint <<EOF; |
590 | |
591 | |
592 | Now that you have completed your report, would you like to send |
593 | the message to $address$andcc, display the message on |
594 | the screen, re-edit it, or cancel without sending anything? |
595 | You may also save the message as a file to mail at another time. |
596 | |
597 | EOF |
598 | |
a5f75d66 |
599 | print "Action (Send/Display/Edit/Cancel/Save to File): "; |
37fa004c |
600 | my($action) = scalar(<>); |
601 | chop $action; |
602 | |
a5f75d66 |
603 | if( $action =~ /^(f|sa)/i ) { # <F>ile/<Sa>ve |
37fa004c |
604 | print "\n\nName of file to save message in [perlbug.rep]: "; |
605 | my($file) = scalar(<>); |
606 | chop $file; |
607 | if($file eq "") { $file = "perlbug.rep" } |
608 | |
609 | open(FILE,">$file"); |
610 | open(REP,"<$filename"); |
611 | print FILE "To: $address\nSubject: $subject\n"; |
612 | print FILE "Cc: $cc\n" if $cc; |
613 | print FILE "Reply-To: $from\n" if $from; |
614 | print FILE "\n"; |
615 | while(<REP>) { print FILE } |
616 | close(REP); |
617 | close(FILE); |
618 | |
619 | print "\nMessage saved in `$file'.\n"; |
620 | exit; |
621 | |
a5f75d66 |
622 | } elsif( $action =~ /^(d|l|sh)/i ) { # <D>isplay, <L>ist, <Sh>ow |
37fa004c |
623 | # Display the message |
624 | open(REP,"<$filename"); |
625 | while(<REP>) { print $_ } |
626 | close(REP); |
84478119 |
627 | } elsif( $action =~ /^se/i ) { # <S>end |
a5f75d66 |
628 | # Send the message |
84478119 |
629 | print "\ |
630 | Are you certain you want to send this message? |
631 | Please type \"yes\" if you are: "; |
632 | my($reply) = scalar(<STDIN>); |
633 | chop($reply); |
634 | if( $reply eq "yes" ) { |
635 | last; |
ab3ef367 |
636 | } else { |
637 | paraprint <<EOF; |
638 | |
639 | That wasn't a clear "yes", so I won't send your message. If you are sure |
640 | your message should be sent, type in "yes" (without the quotes) at the |
641 | confirmation prompt. |
642 | |
643 | EOF |
644 | |
84478119 |
645 | } |
a5f75d66 |
646 | } elsif( $action =~ /^[er]/i ) { # <E>dit, <R>e-edit |
37fa004c |
647 | # edit the message |
a5f75d66 |
648 | Edit(); |
649 | #system("$ed $filename"); |
650 | } elsif( $action =~ /^[qc]/i ) { # <C>ancel, <Q>uit |
774d564b |
651 | Cancel(); |
84478119 |
652 | } elsif( $action =~ /^s/ ) { |
653 | paraprint <<EOF; |
654 | |
655 | I'm sorry, but I didn't understand that. Please type "send" or "save". |
656 | EOF |
37fa004c |
657 | } |
658 | |
659 | } |
660 | } |
661 | } |
662 | |
663 | |
664 | sub Send { |
665 | |
666 | # Message has been accepted for transmission -- Send the message |
c07a80fd |
667 | |
668 | if($::HaveSend) { |
37fa004c |
669 | |
c07a80fd |
670 | $msg = new Mail::Send Subject => $subject, To => $address; |
37fa004c |
671 | |
c07a80fd |
672 | $msg->cc($cc) if $cc; |
673 | $msg->add("Reply-To",$from) if $from; |
37fa004c |
674 | |
c07a80fd |
675 | $fh = $msg->open; |
676 | |
677 | open(REP,"<$filename"); |
678 | while(<REP>) { print $fh $_ } |
679 | close(REP); |
37fa004c |
680 | |
c07a80fd |
681 | $fh->close; |
682 | |
683 | } else { |
684 | if ($Is_VMS) { |
685 | if ( ($address =~ /@/ and $address !~ /^\w+%"/) or |
686 | ($cc =~ /@/ and $cc !~ /^\w+%"/) ){ |
687 | my($prefix); |
688 | foreach (qw[ IN MX SMTP UCX PONY WINS ],'') { |
689 | $prefix = "$_%",last if $ENV{"MAIL\$PROTOCOL_$_"}; |
690 | } |
691 | $address = qq[${prefix}"$address"] unless $address =~ /^\w+%"/; |
692 | $cc = qq[${prefix}"$cc"] unless !$cc || $cc =~ /^\w+%"/; |
693 | } |
694 | $subject =~ s/"/""/g; $address =~ s/"/""/g; $cc =~ s/"/""/g; |
695 | my($sts) = system(qq[mail/Subject="$subject" $filename. "$address","$cc"]); |
68dc0745 |
696 | if ($sts) { die "Can't spawn off mail\n\t(leaving bug report in $filename): $sts\n;" } |
c07a80fd |
697 | } else { |
698 | my($sendmail) = ""; |
699 | |
700 | foreach (qw(/usr/lib/sendmail /usr/sbin/sendmail /usr/ucblib/sendmail)) |
701 | { |
702 | $sendmail = $_, last if -e $_; |
703 | } |
704 | |
705 | paraprint <<"EOF" and die "\n" if $sendmail eq ""; |
706 | |
707 | I am terribly sorry, but I cannot find sendmail, or a close equivalent, and |
708 | the perl package Mail::Send has not been installed, so I can't send your bug |
d121ca8c |
709 | report. We apologize for the inconvenience. |
c07a80fd |
710 | |
711 | So you may attempt to find some way of sending your message, it has |
712 | been left in the file `$filename'. |
713 | |
714 | EOF |
715 | |
716 | open(SENDMAIL,"|$sendmail -t"); |
717 | print SENDMAIL "To: $address\n"; |
718 | print SENDMAIL "Subject: $subject\n"; |
719 | print SENDMAIL "Cc: $cc\n" if $cc; |
720 | print SENDMAIL "Reply-To: $from\n" if $from; |
721 | print SENDMAIL "\n\n"; |
722 | open(REP,"<$filename"); |
723 | while(<REP>) { print SENDMAIL $_ } |
724 | close(REP); |
725 | |
726 | close(SENDMAIL); |
727 | } |
37fa004c |
728 | |
c07a80fd |
729 | } |
37fa004c |
730 | |
731 | print "\nMessage sent.\n"; |
732 | |
733 | 1 while unlink($filename); # remove all versions under VMS |
734 | |
735 | } |
736 | |
737 | sub Help { |
738 | print <<EOF; |
739 | |
740 | A program to help generate bug reports about perl5, and mail them. |
741 | It is designed to be used interactively. Normally no arguments will |
742 | be needed. |
743 | |
744 | Usage: |
745 | $0 [-v] [-a address] [-s subject] [-b body | -f file ] |
d121ca8c |
746 | [-r returnaddress] [-e editor] [-c adminaddress | -C] [-S] [-t] [-h] |
37fa004c |
747 | |
c07a80fd |
748 | Simplest usage: run "$0", and follow the prompts. |
37fa004c |
749 | |
750 | Options: |
751 | |
752 | -v Include Verbose configuration data in the report |
753 | -f File containing the body of the report. Use this to |
754 | quickly send a prepared message. |
755 | -S Send without asking for confirmation. |
756 | -a Address to send the report to. Defaults to `$address'. |
757 | -c Address to send copy of report to. Defaults to `$cc'. |
758 | -C Don't send copy to administrator. |
759 | -s Subject to include with the message. You will be prompted |
760 | if you don't supply one on the command line. |
761 | -b Body of the report. If not included on the command line, or |
762 | in a file with -f, you will get a chance to edit the message. |
763 | -r Your return address. The program will ask you to confirm |
764 | this if you don't give it here. |
765 | -e Editor to use. |
766 | -t Test mode. The target address defaults to `$testaddress'. |
c07a80fd |
767 | -d Data mode (the default if you redirect or pipe output.) |
768 | This prints out your configuration data, without mailing |
769 | anything. You can use this with -v to get more complete data. |
d121ca8c |
770 | -h Print this help message. |
37fa004c |
771 | |
772 | EOF |
773 | } |
774 | |
775 | sub paraprint { |
776 | my @paragraphs = split /\n{2,}/, "@_"; |
c07a80fd |
777 | print "\n\n"; |
37fa004c |
778 | for (@paragraphs) { # implicit local $_ |
779 | s/(\S)\s*\n/$1 /g; |
780 | write; |
781 | print "\n"; |
782 | } |
783 | |
784 | } |
785 | |
786 | |
787 | format STDOUT = |
788 | ^<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< ~~ |
789 | $_ |
790 | . |
d121ca8c |
791 | |
792 | __END__ |
793 | |
794 | =head1 NAME |
795 | |
796 | perlbug - how to submit bug reports on Perl |
797 | |
798 | =head1 SYNOPSIS |
799 | |
800 | B<perlbug> S<[ B<-v> ]> S<[ B<-a> I<address> ]> S<[ B<-s> I<subject> ]> |
801 | S<[ B<-b> I<body> | B<-f> I<file> ]> S<[ B<-r> I<returnaddress> ]> |
802 | S<[ B<-e> I<editor> ]> S<[ B<-c> I<adminaddress> | B<-C> ]> |
803 | S<[ B<-S> ]> S<[ B<-t> ]> S<[ B<-d> ]> S<[ B<-h> ]> |
804 | |
805 | =head1 DESCRIPTION |
806 | |
807 | A program to help generate bug reports about perl or the modules that |
808 | come with it, and mail them. |
809 | |
810 | If you have found a bug with a non-standard port (one that was not part |
811 | of the I<standard distribution>), a binary distribution, or a |
812 | non-standard module (such as Tk, CGI, etc), then please see the |
813 | documentation that came with that distribution to determine the correct |
814 | place to report bugs. |
815 | |
816 | C<perlbug> is designed to be used interactively. Normally no arguments |
817 | will be needed. Simply run it, and follow the prompts. |
818 | |
819 | If you are unable to run B<perlbug> (most likely because you don't have |
820 | a working setup to send mail that perlbug recognizes), you may have to |
821 | compose your own report, and email it to B<perlbug@perl.com>. You might |
822 | find the B<-d> option useful to get summary information in that case. |
823 | |
824 | In any case, when reporting a bug, please make sure you have run through |
825 | this checklist: |
826 | |
827 | =over 4 |
828 | |
829 | =item What version of perl you are running? |
830 | |
831 | Type C<perl -v> at the command line to find out. |
832 | |
833 | =item Are you running the latest released version of perl? |
834 | |
835 | Look at http://www.perl.com/ to find out. If it is not the latest |
836 | released version, get that one and see whether your bug has been |
837 | fixed. Note that bug reports about old versions of perl, especially |
838 | those prior to the 5.0 release, are likely to fall upon deaf ears. |
839 | You are on your own if you continue to use perl1 .. perl4. |
840 | |
841 | =item Are you sure what you have is a bug? |
842 | |
843 | A significant number of the bug reports we get turn out to be documented |
844 | features in perl. Make sure the behavior you are witnessing doesn't fall |
845 | under that category, by glancing through the documentation that comes |
846 | with perl (we'll admit this is no mean task, given the sheer volume of |
847 | it all, but at least have a look at the sections that I<seem> relevant). |
848 | |
849 | Be aware of the familiar traps that perl programmers of various hues |
850 | fall into. See L<perltrap>. |
851 | |
852 | Try to study the problem under the perl debugger, if necessary. |
853 | See L<perldebug>. |
854 | |
855 | =item Do you have a proper test case? |
856 | |
857 | The easier it is to reproduce your bug, the more likely it will be |
858 | fixed, because if no one can duplicate the problem, no one can fix it. |
859 | A good test case has most of these attributes: fewest possible number |
860 | of lines; few dependencies on external commands, modules, or |
861 | libraries; runs on most platforms unimpeded; and is self-documenting. |
862 | |
863 | A good test case is almost always a good candidate to be on the perl |
864 | test suite. If you have the time, consider making your test case so |
865 | that it will readily fit into the standard test suite. |
866 | |
867 | =item Can you describe the bug in plain English? |
868 | |
869 | The easier it is to understand a reproducible bug, the more likely it |
870 | will be fixed. Anything you can provide by way of insight into the |
871 | problem helps a great deal. In other words, try to analyse the |
872 | problem to the extent you feel qualified and report your discoveries. |
873 | |
874 | =item Can you fix the bug yourself? |
875 | |
876 | A bug report which I<includes a patch to fix it> will almost |
877 | definitely be fixed. Use the C<diff> program to generate your patches |
878 | (C<diff> is being maintained by the GNU folks as part of the B<diffutils> |
879 | package, so you should be able to get it from any of the GNU software |
880 | repositories). If you do submit a patch, the cool-dude counter at |
881 | perlbug@perl.com will register you as a savior of the world. Your |
882 | patch may be returned with requests for changes, or requests for more |
883 | detailed explanations about your fix. |
884 | |
885 | Here are some clues for creating quality patches: Use the B<-c> or |
886 | B<-u> switches to the diff program (to create a so-called context or |
887 | unified diff). Make sure the patch is not reversed (the first |
888 | argument to diff is typically the original file, the second argument |
889 | your changed file). Make sure you test your patch by applying it with |
890 | the C<patch> program before you send it on its way. Try to follow the |
891 | same style as the code you are trying to patch. Make sure your patch |
892 | really does work (C<make test>, if the thing you're patching supports |
893 | it). |
894 | |
895 | =item Can you use C<perlbug> to submit the report? |
896 | |
897 | B<perlbug> will, amongst other things, ensure your report includes |
898 | crucial information about your version of perl. If C<perlbug> is unable |
899 | to mail your report after you have typed it in, you may have to compose |
900 | the message yourself, add the output produced by C<perlbug -d> and email |
901 | it to B<perlbug@perl.com>. If, for some reason, you cannot run |
902 | C<perlbug> at all on your system, be sure to include the entire output |
903 | produced by running C<perl -V> (note the uppercase V). |
904 | |
905 | =back |
906 | |
907 | Having done your bit, please be prepared to wait, to be told the bug |
908 | is in your code, or even to get no reply at all. The perl maintainers |
909 | are busy folks, so if your problem is a small one or if it is |
910 | difficult to understand, they may not respond with a personal reply. |
911 | If it is important to you that your bug be fixed, do monitor the |
912 | C<Changes> file in any development releases since the time you submitted |
913 | the bug, and encourage the maintainers with kind words (but never any |
914 | flames!). Feel free to resend your bug report if the next released |
915 | version of perl comes out and your bug is still present. |
916 | |
917 | =head1 OPTIONS |
918 | |
919 | =over 8 |
920 | |
921 | =item B<-a> |
922 | |
923 | Address to send the report to. Defaults to `perlbug@perl.com'. |
924 | |
925 | =item B<-b> |
926 | |
927 | Body of the report. If not included on the command line, or |
928 | in a file with B<-f>, you will get a chance to edit the message. |
929 | |
930 | =item B<-C> |
931 | |
932 | Don't send copy to administrator. |
933 | |
934 | =item B<-c> |
935 | |
936 | Address to send copy of report to. Defaults to the address of the |
937 | local perl administrator (recorded when perl was built). |
938 | |
939 | =item B<-d> |
940 | |
941 | Data mode (the default if you redirect or pipe output). This prints out |
942 | your configuration data, without mailing anything. You can use this |
943 | with B<-v> to get more complete data. |
944 | |
945 | =item B<-e> |
946 | |
947 | Editor to use. |
948 | |
949 | =item B<-f> |
950 | |
951 | File containing the body of the report. Use this to quickly send a |
952 | prepared message. |
953 | |
954 | =item B<-h> |
955 | |
956 | Prints a brief summary of the options. |
957 | |
958 | =item B<-r> |
959 | |
960 | Your return address. The program will ask you to confirm its default |
961 | if you don't use this option. |
962 | |
963 | =item B<-S> |
964 | |
965 | Send without asking for confirmation. |
966 | |
967 | =item B<-s> |
968 | |
969 | Subject to include with the message. You will be prompted if you don't |
970 | supply one on the command line. |
971 | |
972 | =item B<-t> |
973 | |
974 | Test mode. The target address defaults to `perlbug-test@perl.com'. |
975 | |
976 | =item B<-v> |
977 | |
978 | Include verbose configuration data in the report. |
979 | |
980 | =back |
981 | |
982 | =head1 AUTHORS |
983 | |
984 | Kenneth Albanowski (E<lt>kjahds@kjahds.comE<gt>), subsequently I<doc>tored |
985 | by Gurusamy Sarathy (E<lt>gsar@umich.eduE<gt>), Tom Christiansen |
986 | (E<lt>tchrist@perl.comE<gt>), and Nathan Torkington |
987 | (E<lt>gnat@frii.comE<gt>). |
988 | |
989 | =head1 SEE ALSO |
990 | |
991 | perl(1), perldebug(1), perltrap(1), diff(1), patch(1) |
992 | |
993 | =head1 BUGS |
994 | |
995 | None known (guess what must have been used to report them?) |
996 | |
997 | =cut |
998 | |
37fa004c |
999 | !NO!SUBS! |
1000 | |
1001 | close OUT or die "Can't close $file: $!"; |
1002 | chmod 0755, $file or die "Can't reset permissions for $file: $!\n"; |
1003 | exec("$Config{'eunicefix'} $file") if $Config{'eunicefix'} ne ':'; |
d121ca8c |
1004 | |