Commit | Line | Data |
3ebb1980 |
1 | /* |
2 | * This file was produced by running the config_h.SH script, which |
3 | * gets its values from uconfig.sh, which is generally produced by |
4 | * running Configure. |
5 | * |
6 | * Feel free to modify any of this as the need arises. Note, however, |
7 | * that running config_h.SH again will wipe out any changes you've made. |
8 | * For a more permanent change edit uconfig.sh and rerun config_h.SH. |
9 | * |
10 | * $Id: Config_h.U,v 3.0.1.5 1997/02/28 14:57:43 ram Exp $ |
11 | */ |
12 | |
13 | /* |
14 | * Package name : |
15 | * Source directory : |
16 | * Configuration time: |
17 | * Configured by : |
18 | * Target system : unknown |
19 | */ |
20 | |
21 | #ifndef _config_h_ |
22 | #define _config_h_ |
23 | |
24 | /* LOC_SED: |
25 | * This symbol holds the complete pathname to the sed program. |
26 | */ |
27 | #define LOC_SED "" /**/ |
28 | |
29 | /* HAS_ALARM: |
30 | * This symbol, if defined, indicates that the alarm routine is |
31 | * available. |
32 | */ |
33 | /*#define HAS_ALARM / **/ |
34 | |
35 | /* HASATTRIBUTE: |
36 | * This symbol indicates the C compiler can check for function attributes, |
37 | * such as printf formats. This is normally only supported by GNU cc. |
38 | */ |
39 | /*#define HASATTRIBUTE / **/ |
40 | #ifndef HASATTRIBUTE |
41 | #define __attribute__(_arg_) |
42 | #endif |
43 | |
44 | /* HAS_BCMP: |
45 | * This symbol is defined if the bcmp() routine is available to |
46 | * compare blocks of memory. |
47 | */ |
48 | /*#define HAS_BCMP / **/ |
49 | |
50 | /* HAS_BCOPY: |
51 | * This symbol is defined if the bcopy() routine is available to |
52 | * copy blocks of memory. |
53 | */ |
54 | /*#define HAS_BCOPY / **/ |
55 | |
56 | /* HAS_BZERO: |
57 | * This symbol is defined if the bzero() routine is available to |
58 | * set a memory block to 0. |
59 | */ |
60 | /*#define HAS_BZERO / **/ |
61 | |
62 | /* HAS_CHOWN: |
63 | * This symbol, if defined, indicates that the chown routine is |
64 | * available. |
65 | */ |
66 | /*#define HAS_CHOWN / **/ |
67 | |
68 | /* HAS_CHROOT: |
69 | * This symbol, if defined, indicates that the chroot routine is |
70 | * available. |
71 | */ |
72 | /*#define HAS_CHROOT / **/ |
73 | |
74 | /* HAS_CHSIZE: |
75 | * This symbol, if defined, indicates that the chsize routine is available |
76 | * to truncate files. You might need a -lx to get this routine. |
77 | */ |
78 | /*#define HAS_CHSIZE / **/ |
79 | |
80 | /* HASCONST: |
81 | * This symbol, if defined, indicates that this C compiler knows about |
82 | * the const type. There is no need to actually test for that symbol |
83 | * within your programs. The mere use of the "const" keyword will |
84 | * trigger the necessary tests. |
85 | */ |
86 | /*#define HASCONST / **/ |
87 | #ifndef HASCONST |
88 | #define const |
89 | #endif |
90 | |
3ebb1980 |
91 | /* HAS_CUSERID: |
92 | * This symbol, if defined, indicates that the cuserid routine is |
93 | * available to get character login names. |
94 | */ |
95 | /*#define HAS_CUSERID / **/ |
96 | |
97 | /* HAS_DBL_DIG: |
98 | * This symbol, if defined, indicates that this system's <float.h> |
99 | * or <limits.h> defines the symbol DBL_DIG, which is the number |
100 | * of significant digits in a double precision number. If this |
101 | * symbol is not defined, a guess of 15 is usually pretty good. |
102 | */ |
103 | /*#define HAS_DBL_DIG / * */ |
104 | |
105 | /* HAS_DIFFTIME: |
106 | * This symbol, if defined, indicates that the difftime routine is |
107 | * available. |
108 | */ |
109 | /*#define HAS_DIFFTIME / **/ |
110 | |
111 | /* HAS_DLERROR: |
112 | * This symbol, if defined, indicates that the dlerror routine is |
113 | * available to return a string describing the last error that |
114 | * occurred from a call to dlopen(), dlclose() or dlsym(). |
115 | */ |
116 | /*#define HAS_DLERROR / **/ |
117 | |
3ebb1980 |
118 | /* HAS_DUP2: |
119 | * This symbol, if defined, indicates that the dup2 routine is |
120 | * available to duplicate file descriptors. |
121 | */ |
122 | /*#define HAS_DUP2 / **/ |
123 | |
124 | /* HAS_FCHMOD: |
125 | * This symbol, if defined, indicates that the fchmod routine is available |
126 | * to change mode of opened files. If unavailable, use chmod(). |
127 | */ |
128 | /*#define HAS_FCHMOD / **/ |
129 | |
130 | /* HAS_FCHOWN: |
131 | * This symbol, if defined, indicates that the fchown routine is available |
132 | * to change ownership of opened files. If unavailable, use chown(). |
133 | */ |
134 | /*#define HAS_FCHOWN / **/ |
135 | |
136 | /* HAS_FCNTL: |
137 | * This symbol, if defined, indicates to the C program that |
138 | * the fcntl() function exists. |
139 | */ |
140 | /*#define HAS_FCNTL / **/ |
141 | |
142 | /* HAS_FGETPOS: |
143 | * This symbol, if defined, indicates that the fgetpos routine is |
144 | * available to get the file position indicator, similar to ftell(). |
145 | */ |
146 | /*#define HAS_FGETPOS / **/ |
147 | |
148 | /* HAS_FLOCK: |
149 | * This symbol, if defined, indicates that the flock routine is |
150 | * available to do file locking. |
151 | */ |
152 | /*#define HAS_FLOCK / **/ |
153 | |
154 | /* HAS_FORK: |
155 | * This symbol, if defined, indicates that the fork routine is |
156 | * available. |
157 | */ |
158 | #define HAS_FORK /**/ |
159 | |
160 | /* HAS_FSETPOS: |
161 | * This symbol, if defined, indicates that the fsetpos routine is |
162 | * available to set the file position indicator, similar to fseek(). |
163 | */ |
164 | /*#define HAS_FSETPOS / **/ |
165 | |
166 | /* HAS_GETTIMEOFDAY: |
167 | * This symbol, if defined, indicates that the gettimeofday() system |
168 | * call is available for a sub-second accuracy clock. Usually, the file |
169 | * <sys/resource.h> needs to be included (see I_SYS_RESOURCE). |
170 | * The type "Timeval" should be used to refer to "struct timeval". |
171 | */ |
172 | /*#define HAS_GETTIMEOFDAY / **/ |
173 | #ifdef HAS_GETTIMEOFDAY |
174 | #define Timeval struct timeval /* Structure used by gettimeofday() */ |
175 | #endif |
176 | |
177 | /* HAS_GETGROUPS: |
178 | * This symbol, if defined, indicates that the getgroups() routine is |
179 | * available to get the list of process groups. If unavailable, multiple |
180 | * groups are probably not supported. |
181 | */ |
182 | /*#define HAS_GETGROUPS / **/ |
183 | |
184 | /* HAS_GETLOGIN: |
185 | * This symbol, if defined, indicates that the getlogin routine is |
186 | * available to get the login name. |
187 | */ |
188 | /*#define HAS_GETLOGIN / **/ |
189 | |
190 | /* HAS_GETPGID: |
191 | * This symbol, if defined, indicates to the C program that |
192 | * the getpgid(pid) function is available to get the |
193 | * process group id. |
194 | */ |
195 | /*#define HAS_GETPGID / **/ |
196 | |
3ebb1980 |
197 | /* HAS_GETPGRP2: |
198 | * This symbol, if defined, indicates that the getpgrp2() (as in DG/UX) |
199 | * routine is available to get the current process group. |
200 | */ |
201 | /*#define HAS_GETPGRP2 / **/ |
202 | |
203 | /* HAS_GETPPID: |
204 | * This symbol, if defined, indicates that the getppid routine is |
205 | * available to get the parent process ID. |
206 | */ |
207 | /*#define HAS_GETPPID / **/ |
208 | |
209 | /* HAS_GETPRIORITY: |
210 | * This symbol, if defined, indicates that the getpriority routine is |
211 | * available to get a process's priority. |
212 | */ |
213 | /*#define HAS_GETPRIORITY / **/ |
214 | |
215 | /* HAS_INET_ATON: |
216 | * This symbol, if defined, indicates to the C program that the |
217 | * inet_aton() function is available to parse IP address "dotted-quad" |
218 | * strings. |
219 | */ |
220 | /*#define HAS_INET_ATON / **/ |
221 | |
222 | /* HAS_KILLPG: |
223 | * This symbol, if defined, indicates that the killpg routine is available |
224 | * to kill process groups. If unavailable, you probably should use kill |
225 | * with a negative process number. |
226 | */ |
227 | /*#define HAS_KILLPG / **/ |
228 | |
229 | /* HAS_LINK: |
230 | * This symbol, if defined, indicates that the link routine is |
231 | * available to create hard links. |
232 | */ |
233 | /*#define HAS_LINK / **/ |
234 | |
235 | /* HAS_LOCALECONV: |
236 | * This symbol, if defined, indicates that the localeconv routine is |
237 | * available for numeric and monetary formatting conventions. |
238 | */ |
239 | /*#define HAS_LOCALECONV / **/ |
240 | |
241 | /* HAS_LOCKF: |
242 | * This symbol, if defined, indicates that the lockf routine is |
243 | * available to do file locking. |
244 | */ |
245 | /*#define HAS_LOCKF / **/ |
246 | |
247 | /* HAS_LSTAT: |
248 | * This symbol, if defined, indicates that the lstat routine is |
249 | * available to do file stats on symbolic links. |
250 | */ |
251 | /*#define HAS_LSTAT / **/ |
252 | |
253 | /* HAS_MBLEN: |
254 | * This symbol, if defined, indicates that the mblen routine is available |
255 | * to find the number of bytes in a multibye character. |
256 | */ |
257 | /*#define HAS_MBLEN / **/ |
258 | |
259 | /* HAS_MBSTOWCS: |
260 | * This symbol, if defined, indicates that the mbstowcs routine is |
261 | * available to covert a multibyte string into a wide character string. |
262 | */ |
263 | /*#define HAS_MBSTOWCS / **/ |
264 | |
265 | /* HAS_MBTOWC: |
266 | * This symbol, if defined, indicates that the mbtowc routine is available |
267 | * to covert a multibyte to a wide character. |
268 | */ |
269 | /*#define HAS_MBTOWC / **/ |
270 | |
271 | /* HAS_MEMCMP: |
272 | * This symbol, if defined, indicates that the memcmp routine is available |
273 | * to compare blocks of memory. |
274 | */ |
275 | /*#define HAS_MEMCMP / **/ |
276 | |
277 | /* HAS_MEMCPY: |
278 | * This symbol, if defined, indicates that the memcpy routine is available |
279 | * to copy blocks of memory. |
280 | */ |
281 | /*#define HAS_MEMCPY / **/ |
282 | |
283 | /* HAS_MEMMOVE: |
284 | * This symbol, if defined, indicates that the memmove routine is available |
285 | * to copy potentially overlapping blocks of memory. This should be used |
286 | * only when HAS_SAFE_BCOPY is not defined. If neither is there, roll your |
287 | * own version. |
288 | */ |
289 | /*#define HAS_MEMMOVE / **/ |
290 | |
291 | /* HAS_MEMSET: |
292 | * This symbol, if defined, indicates that the memset routine is available |
293 | * to set blocks of memory. |
294 | */ |
295 | /*#define HAS_MEMSET / **/ |
296 | |
297 | /* HAS_MKDIR: |
298 | * This symbol, if defined, indicates that the mkdir routine is available |
299 | * to create directories. Otherwise you should fork off a new process to |
300 | * exec /bin/mkdir. |
301 | */ |
302 | /*#define HAS_MKDIR / **/ |
303 | |
304 | /* HAS_MKFIFO: |
305 | * This symbol, if defined, indicates that the mkfifo routine is |
306 | * available to create FIFOs. Otherwise, mknod should be able to |
307 | * do it for you. However, if mkfifo is there, mknod might require |
308 | * super-user privileges which mkfifo will not. |
309 | */ |
310 | /*#define HAS_MKFIFO / **/ |
311 | |
312 | /* HAS_MKTIME: |
313 | * This symbol, if defined, indicates that the mktime routine is |
314 | * available. |
315 | */ |
316 | /*#define HAS_MKTIME / **/ |
317 | |
318 | /* HAS_MSYNC: |
319 | * This symbol, if defined, indicates that the msync system call is |
320 | * available to synchronize a mapped file. |
321 | */ |
322 | /*#define HAS_MSYNC / **/ |
323 | |
324 | /* HAS_MUNMAP: |
325 | * This symbol, if defined, indicates that the munmap system call is |
326 | * available to unmap a region, usually mapped by mmap(). |
327 | */ |
328 | /*#define HAS_MUNMAP / **/ |
329 | |
330 | /* HAS_NICE: |
331 | * This symbol, if defined, indicates that the nice routine is |
332 | * available. |
333 | */ |
334 | /*#define HAS_NICE / **/ |
335 | |
336 | /* HAS_PATHCONF: |
337 | * This symbol, if defined, indicates that pathconf() is available |
338 | * to determine file-system related limits and options associated |
339 | * with a given filename. |
340 | */ |
341 | /* HAS_FPATHCONF: |
342 | * This symbol, if defined, indicates that pathconf() is available |
343 | * to determine file-system related limits and options associated |
344 | * with a given open file descriptor. |
345 | */ |
346 | /*#define HAS_PATHCONF / **/ |
347 | /*#define HAS_FPATHCONF / **/ |
348 | |
349 | /* HAS_PAUSE: |
350 | * This symbol, if defined, indicates that the pause routine is |
351 | * available to suspend a process until a signal is received. |
352 | */ |
353 | /*#define HAS_PAUSE / **/ |
354 | |
355 | /* HAS_PIPE: |
356 | * This symbol, if defined, indicates that the pipe routine is |
357 | * available to create an inter-process channel. |
358 | */ |
359 | /*#define HAS_PIPE / **/ |
360 | |
361 | /* HAS_POLL: |
362 | * This symbol, if defined, indicates that the poll routine is |
363 | * available to poll active file descriptors. You may safely |
364 | * include <poll.h> when this symbol is defined. |
365 | */ |
366 | /*#define HAS_POLL / **/ |
367 | |
368 | /* HAS_READDIR: |
369 | * This symbol, if defined, indicates that the readdir routine is |
370 | * available to read directory entries. You may have to include |
371 | * <dirent.h>. See I_DIRENT. |
372 | */ |
373 | /*#define HAS_READDIR / **/ |
374 | |
375 | /* HAS_SEEKDIR: |
376 | * This symbol, if defined, indicates that the seekdir routine is |
377 | * available. You may have to include <dirent.h>. See I_DIRENT. |
378 | */ |
379 | /*#define HAS_SEEKDIR / **/ |
380 | |
381 | /* HAS_TELLDIR: |
382 | * This symbol, if defined, indicates that the telldir routine is |
383 | * available. You may have to include <dirent.h>. See I_DIRENT. |
384 | */ |
385 | /*#define HAS_TELLDIR / **/ |
386 | |
387 | /* HAS_REWINDDIR: |
388 | * This symbol, if defined, indicates that the rewinddir routine is |
389 | * available. You may have to include <dirent.h>. See I_DIRENT. |
390 | */ |
391 | /*#define HAS_REWINDDIR / **/ |
392 | |
393 | /* HAS_READLINK: |
394 | * This symbol, if defined, indicates that the readlink routine is |
395 | * available to read the value of a symbolic link. |
396 | */ |
397 | /*#define HAS_READLINK / **/ |
398 | |
399 | /* HAS_RENAME: |
400 | * This symbol, if defined, indicates that the rename routine is available |
401 | * to rename files. Otherwise you should do the unlink(), link(), unlink() |
402 | * trick. |
403 | */ |
404 | /*#define HAS_RENAME / **/ |
405 | |
406 | /* HAS_RMDIR: |
407 | * This symbol, if defined, indicates that the rmdir routine is |
408 | * available to remove directories. Otherwise you should fork off a |
409 | * new process to exec /bin/rmdir. |
410 | */ |
411 | /*#define HAS_RMDIR / **/ |
412 | |
413 | /* HAS_SELECT: |
414 | * This symbol, if defined, indicates that the select routine is |
415 | * available to select active file descriptors. If the timeout field |
416 | * is used, <sys/time.h> may need to be included. |
417 | */ |
418 | /*#define HAS_SELECT / **/ |
419 | |
420 | /* HAS_SETEGID: |
421 | * This symbol, if defined, indicates that the setegid routine is available |
422 | * to change the effective gid of the current program. |
423 | */ |
424 | /*#define HAS_SETEGID / **/ |
425 | |
426 | /* HAS_SETEUID: |
427 | * This symbol, if defined, indicates that the seteuid routine is available |
428 | * to change the effective uid of the current program. |
429 | */ |
430 | /*#define HAS_SETEUID / **/ |
431 | |
432 | /* HAS_SETLINEBUF: |
433 | * This symbol, if defined, indicates that the setlinebuf routine is |
434 | * available to change stderr or stdout from block-buffered or unbuffered |
435 | * to a line-buffered mode. |
436 | */ |
437 | /*#define HAS_SETLINEBUF / **/ |
438 | |
439 | /* HAS_SETLOCALE: |
440 | * This symbol, if defined, indicates that the setlocale routine is |
441 | * available to handle locale-specific ctype implementations. |
442 | */ |
443 | /*#define HAS_SETLOCALE / **/ |
444 | |
445 | /* HAS_SETPGID: |
446 | * This symbol, if defined, indicates that the setpgid(pid, gpid) |
447 | * routine is available to set process group ID. |
448 | */ |
449 | /*#define HAS_SETPGID / **/ |
450 | |
3ebb1980 |
451 | /* HAS_SETPGRP2: |
452 | * This symbol, if defined, indicates that the setpgrp2() (as in DG/UX) |
453 | * routine is available to set the current process group. |
454 | */ |
455 | /*#define HAS_SETPGRP2 / **/ |
456 | |
457 | /* HAS_SETPRIORITY: |
458 | * This symbol, if defined, indicates that the setpriority routine is |
459 | * available to set a process's priority. |
460 | */ |
461 | /*#define HAS_SETPRIORITY / **/ |
462 | |
463 | /* HAS_SETREGID: |
464 | * This symbol, if defined, indicates that the setregid routine is |
465 | * available to change the real and effective gid of the current |
466 | * process. |
467 | */ |
468 | /* HAS_SETRESGID: |
469 | * This symbol, if defined, indicates that the setresgid routine is |
470 | * available to change the real, effective and saved gid of the current |
471 | * process. |
472 | */ |
473 | /*#define HAS_SETREGID / **/ |
474 | /*#define HAS_SETRESGID / **/ |
475 | |
476 | /* HAS_SETREUID: |
477 | * This symbol, if defined, indicates that the setreuid routine is |
478 | * available to change the real and effective uid of the current |
479 | * process. |
480 | */ |
481 | /* HAS_SETRESUID: |
482 | * This symbol, if defined, indicates that the setresuid routine is |
483 | * available to change the real, effective and saved uid of the current |
484 | * process. |
485 | */ |
486 | /*#define HAS_SETREUID / **/ |
487 | /*#define HAS_SETRESUID / **/ |
488 | |
489 | /* HAS_SETRGID: |
490 | * This symbol, if defined, indicates that the setrgid routine is available |
491 | * to change the real gid of the current program. |
492 | */ |
493 | /*#define HAS_SETRGID / **/ |
494 | |
495 | /* HAS_SETRUID: |
496 | * This symbol, if defined, indicates that the setruid routine is available |
497 | * to change the real uid of the current program. |
498 | */ |
499 | /*#define HAS_SETRUID / **/ |
500 | |
501 | /* HAS_SETSID: |
502 | * This symbol, if defined, indicates that the setsid routine is |
503 | * available to set the process group ID. |
504 | */ |
505 | /*#define HAS_SETSID / **/ |
506 | |
3ebb1980 |
507 | /* HAS_STRCHR: |
508 | * This symbol is defined to indicate that the strchr()/strrchr() |
509 | * functions are available for string searching. If not, try the |
510 | * index()/rindex() pair. |
511 | */ |
512 | /* HAS_INDEX: |
513 | * This symbol is defined to indicate that the index()/rindex() |
514 | * functions are available for string searching. |
515 | */ |
516 | /*#define HAS_STRCHR / **/ |
517 | /*#define HAS_INDEX / **/ |
518 | |
519 | /* HAS_STRCOLL: |
520 | * This symbol, if defined, indicates that the strcoll routine is |
521 | * available to compare strings using collating information. |
522 | */ |
523 | /*#define HAS_STRCOLL / **/ |
524 | |
525 | /* USE_STRUCT_COPY: |
526 | * This symbol, if defined, indicates that this C compiler knows how |
527 | * to copy structures. If undefined, you'll need to use a block copy |
528 | * routine of some sort instead. |
529 | */ |
530 | /*#define USE_STRUCT_COPY / **/ |
531 | |
532 | /* HAS_STRTOD: |
533 | * This symbol, if defined, indicates that the strtod routine is |
534 | * available to provide better numeric string conversion than atof(). |
535 | */ |
536 | /*#define HAS_STRTOD / **/ |
537 | |
538 | /* HAS_STRTOL: |
539 | * This symbol, if defined, indicates that the strtol routine is available |
540 | * to provide better numeric string conversion than atoi() and friends. |
541 | */ |
542 | /*#define HAS_STRTOL / **/ |
543 | |
3ebb1980 |
544 | /* HAS_STRXFRM: |
545 | * This symbol, if defined, indicates that the strxfrm() routine is |
546 | * available to transform strings. |
547 | */ |
548 | /*#define HAS_STRXFRM / **/ |
549 | |
550 | /* HAS_SYMLINK: |
551 | * This symbol, if defined, indicates that the symlink routine is available |
552 | * to create symbolic links. |
553 | */ |
554 | /*#define HAS_SYMLINK / **/ |
555 | |
556 | /* HAS_SYSCALL: |
557 | * This symbol, if defined, indicates that the syscall routine is |
558 | * available to call arbitrary system calls. If undefined, that's tough. |
559 | */ |
560 | /*#define HAS_SYSCALL / **/ |
561 | |
562 | /* HAS_SYSCONF: |
563 | * This symbol, if defined, indicates that sysconf() is available |
564 | * to determine system related limits and options. |
565 | */ |
566 | /*#define HAS_SYSCONF / **/ |
567 | |
568 | /* HAS_SYSTEM: |
569 | * This symbol, if defined, indicates that the system routine is |
570 | * available to issue a shell command. |
571 | */ |
572 | /*#define HAS_SYSTEM / **/ |
573 | |
574 | /* HAS_TCGETPGRP: |
575 | * This symbol, if defined, indicates that the tcgetpgrp routine is |
576 | * available to get foreground process group ID. |
577 | */ |
578 | /*#define HAS_TCGETPGRP / **/ |
579 | |
580 | /* HAS_TCSETPGRP: |
581 | * This symbol, if defined, indicates that the tcsetpgrp routine is |
582 | * available to set foreground process group ID. |
583 | */ |
584 | /*#define HAS_TCSETPGRP / **/ |
585 | |
586 | /* HAS_TRUNCATE: |
587 | * This symbol, if defined, indicates that the truncate routine is |
588 | * available to truncate files. |
589 | */ |
590 | /*#define HAS_TRUNCATE / **/ |
591 | |
592 | /* HAS_TZNAME: |
593 | * This symbol, if defined, indicates that the tzname[] array is |
594 | * available to access timezone names. |
595 | */ |
596 | /*#define HAS_TZNAME / **/ |
597 | |
598 | /* HAS_UMASK: |
599 | * This symbol, if defined, indicates that the umask routine is |
600 | * available to set and get the value of the file creation mask. |
601 | */ |
602 | /*#define HAS_UMASK / **/ |
603 | |
4e0554ec |
604 | /* HAS_USLEEP: |
605 | * This symbol, if defined, indicates that the usleep routine is |
606 | * available to let the process sleep on a sub-second accuracy. |
607 | */ |
608 | /*#define HAS_USLEEP / **/ |
609 | |
3ebb1980 |
610 | /* HASVOLATILE: |
611 | * This symbol, if defined, indicates that this C compiler knows about |
612 | * the volatile declaration. |
613 | */ |
614 | /*#define HASVOLATILE / **/ |
615 | #ifndef HASVOLATILE |
616 | #define volatile |
617 | #endif |
618 | |
619 | /* HAS_WAIT4: |
620 | * This symbol, if defined, indicates that wait4() exists. |
621 | */ |
622 | /*#define HAS_WAIT4 / **/ |
623 | |
624 | /* HAS_WAITPID: |
625 | * This symbol, if defined, indicates that the waitpid routine is |
626 | * available to wait for child process. |
627 | */ |
628 | /*#define HAS_WAITPID / **/ |
629 | |
630 | /* HAS_WCSTOMBS: |
631 | * This symbol, if defined, indicates that the wcstombs routine is |
632 | * available to convert wide character strings to multibyte strings. |
633 | */ |
634 | /*#define HAS_WCSTOMBS / **/ |
635 | |
636 | /* HAS_WCTOMB: |
637 | * This symbol, if defined, indicates that the wctomb routine is available |
638 | * to covert a wide character to a multibyte. |
639 | */ |
640 | /*#define HAS_WCTOMB / **/ |
641 | |
642 | /* I_ARPA_INET: |
643 | * This symbol, if defined, indicates to the C program that it should |
644 | * include <arpa/inet.h> to get inet_addr and friends declarations. |
645 | */ |
646 | /*#define I_ARPA_INET / **/ |
647 | |
648 | /* I_DBM: |
649 | * This symbol, if defined, indicates that <dbm.h> exists and should |
650 | * be included. |
651 | */ |
652 | /* I_RPCSVC_DBM: |
653 | * This symbol, if defined, indicates that <rpcsvc/dbm.h> exists and |
654 | * should be included. |
655 | */ |
656 | /*#define I_DBM / **/ |
657 | /*#define I_RPCSVC_DBM / **/ |
658 | |
659 | /* I_DIRENT: |
660 | * This symbol, if defined, indicates to the C program that it should |
661 | * include <dirent.h>. Using this symbol also triggers the definition |
662 | * of the Direntry_t define which ends up being 'struct dirent' or |
663 | * 'struct direct' depending on the availability of <dirent.h>. |
664 | */ |
665 | /* DIRNAMLEN: |
666 | * This symbol, if defined, indicates to the C program that the length |
667 | * of directory entry names is provided by a d_namlen field. Otherwise |
668 | * you need to do strlen() on the d_name field. |
669 | */ |
670 | /* Direntry_t: |
671 | * This symbol is set to 'struct direct' or 'struct dirent' depending on |
672 | * whether dirent is available or not. You should use this pseudo type to |
673 | * portably declare your directory entries. |
674 | */ |
675 | /*#define I_DIRENT / **/ |
676 | /*#define DIRNAMLEN / **/ |
677 | #define Direntry_t struct dirent |
678 | |
679 | /* I_DLFCN: |
680 | * This symbol, if defined, indicates that <dlfcn.h> exists and should |
681 | * be included. |
682 | */ |
683 | /*#define I_DLFCN / **/ |
684 | |
685 | /* I_FCNTL: |
686 | * This manifest constant tells the C program to include <fcntl.h>. |
687 | */ |
688 | /*#define I_FCNTL / **/ |
689 | |
690 | /* I_FLOAT: |
691 | * This symbol, if defined, indicates to the C program that it should |
692 | * include <float.h> to get definition of symbols like DBL_MAX or |
693 | * DBL_MIN, i.e. machine dependent floating point values. |
694 | */ |
695 | /*#define I_FLOAT / **/ |
696 | |
697 | /* I_LIMITS: |
698 | * This symbol, if defined, indicates to the C program that it should |
699 | * include <limits.h> to get definition of symbols like WORD_BIT or |
700 | * LONG_MAX, i.e. machine dependant limitations. |
701 | */ |
702 | /*#define I_LIMITS / **/ |
703 | |
704 | /* I_LOCALE: |
705 | * This symbol, if defined, indicates to the C program that it should |
706 | * include <locale.h>. |
707 | */ |
708 | /*#define I_LOCALE / **/ |
709 | |
710 | /* I_MATH: |
711 | * This symbol, if defined, indicates to the C program that it should |
712 | * include <math.h>. |
713 | */ |
251f6efd |
714 | #define I_MATH /**/ |
3ebb1980 |
715 | |
716 | /* I_MEMORY: |
717 | * This symbol, if defined, indicates to the C program that it should |
718 | * include <memory.h>. |
719 | */ |
720 | /*#define I_MEMORY / **/ |
721 | |
3ebb1980 |
722 | /* I_NET_ERRNO: |
723 | * This symbol, if defined, indicates that <net/errno.h> exists and |
724 | * should be included. |
725 | */ |
726 | /*#define I_NET_ERRNO / **/ |
727 | |
728 | /* I_NETINET_IN: |
729 | * This symbol, if defined, indicates to the C program that it should |
730 | * include <netinet/in.h>. Otherwise, you may try <sys/in.h>. |
731 | */ |
732 | /*#define I_NETINET_IN / **/ |
733 | |
734 | /* I_SFIO: |
735 | * This symbol, if defined, indicates to the C program that it should |
736 | * include <sfio.h>. |
737 | */ |
738 | /*#define I_SFIO / **/ |
739 | |
740 | /* I_STDDEF: |
741 | * This symbol, if defined, indicates that <stddef.h> exists and should |
742 | * be included. |
743 | */ |
744 | /*#define I_STDDEF / **/ |
745 | |
746 | /* I_STDLIB: |
747 | * This symbol, if defined, indicates that <stdlib.h> exists and should |
748 | * be included. |
749 | */ |
750 | /*#define I_STDLIB / **/ |
751 | |
752 | /* I_STRING: |
753 | * This symbol, if defined, indicates to the C program that it should |
754 | * include <string.h> (USG systems) instead of <strings.h> (BSD systems). |
755 | */ |
756 | #define I_STRING /**/ |
757 | |
758 | /* I_SYS_DIR: |
759 | * This symbol, if defined, indicates to the C program that it should |
760 | * include <sys/dir.h>. |
761 | */ |
762 | /*#define I_SYS_DIR / **/ |
763 | |
764 | /* I_SYS_FILE: |
765 | * This symbol, if defined, indicates to the C program that it should |
766 | * include <sys/file.h> to get definition of R_OK and friends. |
767 | */ |
768 | /*#define I_SYS_FILE / **/ |
769 | |
770 | /* I_SYS_IOCTL: |
771 | * This symbol, if defined, indicates that <sys/ioctl.h> exists and should |
772 | * be included. Otherwise, include <sgtty.h> or <termio.h>. |
773 | */ |
49a78c82 |
774 | /* I_SYS_SOCKIO: |
775 | * This symbol, if defined, indicates the <sys/sockio.h> should be included |
776 | * to get socket ioctl options, like SIOCATMARK. |
777 | */ |
3ebb1980 |
778 | /*#define I_SYS_IOCTL / **/ |
49a78c82 |
779 | /*#define I_SYS_SOCKIO / **/ |
3ebb1980 |
780 | |
781 | /* I_SYS_NDIR: |
782 | * This symbol, if defined, indicates to the C program that it should |
783 | * include <sys/ndir.h>. |
784 | */ |
785 | /*#define I_SYS_NDIR / **/ |
786 | |
787 | /* I_SYS_PARAM: |
788 | * This symbol, if defined, indicates to the C program that it should |
789 | * include <sys/param.h>. |
790 | */ |
791 | /*#define I_SYS_PARAM / **/ |
792 | |
793 | /* I_SYS_RESOURCE: |
794 | * This symbol, if defined, indicates to the C program that it should |
795 | * include <sys/resource.h>. |
796 | */ |
797 | /*#define I_SYS_RESOURCE / **/ |
798 | |
799 | /* I_SYS_SELECT: |
800 | * This symbol, if defined, indicates to the C program that it should |
801 | * include <sys/select.h> in order to get definition of struct timeval. |
802 | */ |
803 | /*#define I_SYS_SELECT / **/ |
804 | |
805 | /* I_SYS_STAT: |
806 | * This symbol, if defined, indicates to the C program that it should |
807 | * include <sys/stat.h>. |
808 | */ |
809 | #define I_SYS_STAT /**/ |
810 | |
811 | /* I_SYS_TIMES: |
812 | * This symbol, if defined, indicates to the C program that it should |
813 | * include <sys/times.h>. |
814 | */ |
815 | /*#define I_SYS_TIMES / **/ |
816 | |
817 | /* I_SYS_TYPES: |
818 | * This symbol, if defined, indicates to the C program that it should |
819 | * include <sys/types.h>. |
820 | */ |
821 | /*#define I_SYS_TYPES / **/ |
822 | |
823 | /* I_SYS_UN: |
824 | * This symbol, if defined, indicates to the C program that it should |
825 | * include <sys/un.h> to get UNIX domain socket definitions. |
826 | */ |
827 | /*#define I_SYS_UN / **/ |
828 | |
829 | /* I_SYS_WAIT: |
830 | * This symbol, if defined, indicates to the C program that it should |
831 | * include <sys/wait.h>. |
832 | */ |
833 | /*#define I_SYS_WAIT / **/ |
834 | |
835 | /* I_TERMIO: |
836 | * This symbol, if defined, indicates that the program should include |
837 | * <termio.h> rather than <sgtty.h>. There are also differences in |
838 | * the ioctl() calls that depend on the value of this symbol. |
839 | */ |
840 | /* I_TERMIOS: |
841 | * This symbol, if defined, indicates that the program should include |
842 | * the POSIX termios.h rather than sgtty.h or termio.h. |
843 | * There are also differences in the ioctl() calls that depend on the |
844 | * value of this symbol. |
845 | */ |
846 | /* I_SGTTY: |
847 | * This symbol, if defined, indicates that the program should include |
848 | * <sgtty.h> rather than <termio.h>. There are also differences in |
849 | * the ioctl() calls that depend on the value of this symbol. |
850 | */ |
851 | /*#define I_TERMIO / **/ |
852 | /*#define I_TERMIOS / **/ |
853 | /*#define I_SGTTY / **/ |
854 | |
855 | /* I_UNISTD: |
856 | * This symbol, if defined, indicates to the C program that it should |
857 | * include <unistd.h>. |
858 | */ |
859 | /*#define I_UNISTD / **/ |
860 | |
861 | /* I_UTIME: |
862 | * This symbol, if defined, indicates to the C program that it should |
863 | * include <utime.h>. |
864 | */ |
865 | /*#define I_UTIME / **/ |
866 | |
867 | /* I_VALUES: |
868 | * This symbol, if defined, indicates to the C program that it should |
869 | * include <values.h> to get definition of symbols like MINFLOAT or |
870 | * MAXLONG, i.e. machine dependant limitations. Probably, you |
871 | * should use <limits.h> instead, if it is available. |
872 | */ |
873 | /*#define I_VALUES / **/ |
874 | |
3ebb1980 |
875 | /* I_VFORK: |
876 | * This symbol, if defined, indicates to the C program that it should |
877 | * include vfork.h. |
878 | */ |
879 | /*#define I_VFORK / **/ |
880 | |
3ebb1980 |
881 | /* INTSIZE: |
882 | * This symbol contains the value of sizeof(int) so that the C |
883 | * preprocessor can make decisions based on it. |
884 | */ |
885 | /* LONGSIZE: |
886 | * This symbol contains the value of sizeof(long) so that the C |
887 | * preprocessor can make decisions based on it. |
888 | */ |
889 | /* SHORTSIZE: |
890 | * This symbol contains the value of sizeof(short) so that the C |
891 | * preprocessor can make decisions based on it. |
892 | */ |
e67aeab1 |
893 | #define INTSIZE 4 /**/ |
a24ffc0b |
894 | #define LONGSIZE 4 /**/ |
e67aeab1 |
895 | #define SHORTSIZE 2 /**/ |
3ebb1980 |
896 | |
897 | /* MULTIARCH: |
898 | * This symbol, if defined, signifies that the build |
899 | * process will produce some binary files that are going to be |
900 | * used in a cross-platform environment. This is the case for |
901 | * example with the NeXT "fat" binaries that contain executables |
902 | * for several CPUs. |
903 | */ |
904 | /*#define MULTIARCH / **/ |
905 | |
906 | /* HAS_QUAD: |
907 | * This symbol, if defined, tells that there's a 64-bit integer type, |
908 | * Quad_t, and its unsigned counterpar, Uquad_t. QUADKIND will be one |
909 | * of QUAD_IS_INT, QUAD_IS_LONG, QUAD_IS_LONG_LONG, or QUAD_IS_INT64_T. |
910 | */ |
911 | /*#define HAS_QUAD / **/ |
912 | #ifdef HAS_QUAD |
913 | # define Quad_t int64_t /**/ |
914 | # define Uquad_t uint64_t /**/ |
915 | # define QUADKIND 4 /**/ |
916 | # define QUAD_IS_INT 1 |
917 | # define QUAD_IS_LONG 2 |
918 | # define QUAD_IS_LONG_LONG 3 |
919 | # define QUAD_IS_INT64_T 4 |
920 | #endif |
921 | |
922 | /* HAS_ACCESSX: |
923 | * This symbol, if defined, indicates that the accessx routine is |
924 | * available to do extended access checks. |
925 | */ |
926 | /*#define HAS_ACCESSX / **/ |
927 | |
928 | /* HAS_EACCESS: |
929 | * This symbol, if defined, indicates that the eaccess routine is |
930 | * available to do extended access checks. |
931 | */ |
932 | /*#define HAS_EACCESS / **/ |
933 | |
934 | /* I_SYS_ACCESS: |
935 | * This symbol, if defined, indicates to the C program that it should |
936 | * include <sys/access.h>. |
937 | */ |
938 | /*#define I_SYS_ACCESS / **/ |
939 | |
940 | /* I_SYS_SECURITY: |
941 | * This symbol, if defined, indicates to the C program that it should |
942 | * include <sys/security.h>. |
943 | */ |
944 | /*#define I_SYS_SECURITY / **/ |
945 | |
a838cfe5 |
946 | /* OSNAME: |
947 | * This symbol contains the name of the operating system, as determined |
948 | * by Configure. You shouldn't rely on it too much; the specific |
949 | * feature tests from Configure are generally more reliable. |
950 | */ |
951 | /* OSVERS: |
952 | * This symbol contains the version of the operating system, as determined |
953 | * by Configure. You shouldn't rely on it too much; the specific |
954 | * feature tests from Configure are generally more reliable. |
955 | */ |
956 | #define OSNAME "unknown" /**/ |
957 | #define OSVERS "" /**/ |
958 | |
3ebb1980 |
959 | /* MEM_ALIGNBYTES: |
960 | * This symbol contains the number of bytes required to align a |
961 | * double, or a long double when applicable. Usual values are 2, |
962 | * 4 and 8. The default is eight, for safety. |
963 | */ |
5440bc8e |
964 | #if defined(USE_CROSS_COMPILE) || defined(MULTIARCH) |
cb5953d6 |
965 | # define MEM_ALIGNBYTES 8 |
3ebb1980 |
966 | #else |
967 | #define MEM_ALIGNBYTES 4 |
968 | #endif |
969 | |
a838cfe5 |
970 | /* ARCHLIB: |
971 | * This variable, if defined, holds the name of the directory in |
972 | * which the user wants to put architecture-dependent public |
973 | * library files for . It is most often a local directory |
974 | * such as /usr/local/lib. Programs using this variable must be |
975 | * prepared to deal with filename expansion. If ARCHLIB is the |
976 | * same as PRIVLIB, it is not defined, since presumably the |
977 | * program already searches PRIVLIB. |
978 | */ |
979 | /* ARCHLIB_EXP: |
980 | * This symbol contains the ~name expanded version of ARCHLIB, to be used |
981 | * in programs that are not prepared to deal with ~ expansion at run-time. |
982 | */ |
983 | /*#define ARCHLIB "/usr/local/lib/perl5/5.7/unknown" / **/ |
984 | /*#define ARCHLIB_EXP "/usr/local/lib/perl5/5.7/unknown" / **/ |
985 | |
986 | /* ARCHNAME: |
987 | * This symbol holds a string representing the architecture name. |
988 | * It may be used to construct an architecture-dependant pathname |
989 | * where library files may be held under a private library, for |
990 | * instance. |
991 | */ |
992 | #define ARCHNAME "unknown" /**/ |
993 | |
994 | /* HAS_ATOLF: |
995 | * This symbol, if defined, indicates that the atolf routine is |
996 | * available to convert strings into long doubles. |
997 | */ |
998 | /*#define HAS_ATOLF / **/ |
999 | |
1000 | /* HAS_ATOLL: |
1001 | * This symbol, if defined, indicates that the atoll routine is |
1002 | * available to convert strings into long longs. |
1003 | */ |
1004 | /*#define HAS_ATOLL / **/ |
1005 | |
1006 | /* BIN: |
1007 | * This symbol holds the path of the bin directory where the package will |
1008 | * be installed. Program must be prepared to deal with ~name substitution. |
1009 | */ |
1010 | /* BIN_EXP: |
1011 | * This symbol is the filename expanded version of the BIN symbol, for |
1012 | * programs that do not want to deal with that at run-time. |
1013 | */ |
1014 | #define BIN "/usr/local/bin" /**/ |
1015 | #define BIN_EXP "" /**/ |
1016 | |
1017 | /* PERL_BINCOMPAT_5005: |
1018 | * This symbol, if defined, indicates that this version of Perl should be |
1019 | * binary-compatible with Perl 5.005. This is impossible for builds |
1020 | * that use features like threads and multiplicity it is always |
1021 | * for those versions. |
1022 | */ |
1023 | /*#define PERL_BINCOMPAT_5005 / **/ |
1024 | |
3ebb1980 |
1025 | /* BYTEORDER: |
1026 | * This symbol holds the hexadecimal constant defined in byteorder, |
1027 | * i.e. 0x1234 or 0x4321, etc... |
1028 | * If the compiler supports cross-compiling or multiple-architecture |
1029 | * binaries (eg. on NeXT systems), use compiler-defined macros to |
1030 | * determine the byte order. |
1031 | * On NeXT 3.2 (and greater), you can build "Fat" Multiple Architecture |
1032 | * Binaries (MAB) on either big endian or little endian machines. |
1033 | * The endian-ness is available at compile-time. This only matters |
1034 | * for perl, where the config.h can be generated and installed on |
1035 | * one system, and used by a different architecture to build an |
1036 | * extension. Older versions of NeXT that might not have |
1037 | * defined either *_ENDIAN__ were all on Motorola 680x0 series, |
1038 | * so the default case (for NeXT) is big endian to catch them. |
1039 | * This might matter for NeXT 3.0. |
1040 | */ |
5440bc8e |
1041 | #if defined(USE_CROSS_COMPILE) || defined(MULTIARCH) |
3ebb1980 |
1042 | # ifdef __LITTLE_ENDIAN__ |
1043 | # if LONGSIZE == 4 |
1044 | # define BYTEORDER 0x1234 |
1045 | # else |
1046 | # if LONGSIZE == 8 |
1047 | # define BYTEORDER 0x12345678 |
1048 | # endif |
1049 | # endif |
1050 | # else |
1051 | # ifdef __BIG_ENDIAN__ |
1052 | # if LONGSIZE == 4 |
1053 | # define BYTEORDER 0x4321 |
1054 | # else |
1055 | # if LONGSIZE == 8 |
1056 | # define BYTEORDER 0x87654321 |
1057 | # endif |
1058 | # endif |
1059 | # endif |
1060 | # endif |
1061 | # if !defined(BYTEORDER) && (defined(NeXT) || defined(__NeXT__)) |
1062 | # define BYTEORDER 0x4321 |
1063 | # endif |
1064 | #else |
a24ffc0b |
1065 | #define BYTEORDER 0x1234 /* large digits for MSB */ |
3ebb1980 |
1066 | #endif /* NeXT */ |
1067 | |
a838cfe5 |
1068 | /* CAT2: |
1069 | * This macro catenates 2 tokens together. |
1070 | */ |
1071 | /* STRINGIFY: |
1072 | * This macro surrounds its token with double quotes. |
1073 | */ |
1074 | #if 42 == 1 |
1075 | #define CAT2(a,b) a/**/b |
1076 | #define STRINGIFY(a) "a" |
1077 | /* If you can get stringification with catify, tell me how! */ |
1078 | #endif |
1079 | #if 42 == 42 |
1080 | #define PeRl_CaTiFy(a, b) a ## b |
1081 | #define PeRl_StGiFy(a) #a |
1082 | /* the additional level of indirection enables these macros to be |
1083 | * used as arguments to other macros. See K&R 2nd ed., page 231. */ |
1084 | #define CAT2(a,b) PeRl_CaTiFy(a,b) |
1085 | #define StGiFy(a) PeRl_StGiFy(a) |
1086 | #define STRINGIFY(a) PeRl_StGiFy(a) |
1087 | #endif |
1088 | #if 42 != 1 && 42 != 42 |
1089 | # include "Bletch: How does this C preprocessor catenate tokens?" |
1090 | #endif |
1091 | |
1092 | /* CPPSTDIN: |
1093 | * This symbol contains the first part of the string which will invoke |
1094 | * the C preprocessor on the standard input and produce to standard |
1095 | * output. Typical value of "cc -E" or "/lib/cpp", but it can also |
1096 | * call a wrapper. See CPPRUN. |
1097 | */ |
1098 | /* CPPMINUS: |
1099 | * This symbol contains the second part of the string which will invoke |
1100 | * the C preprocessor on the standard input and produce to standard |
1101 | * output. This symbol will have the value "-" if CPPSTDIN needs a minus |
1102 | * to specify standard input, otherwise the value is "". |
1103 | */ |
1104 | /* CPPRUN: |
1105 | * This symbol contains the string which will invoke a C preprocessor on |
1106 | * the standard input and produce to standard output. It needs to end |
1107 | * with CPPLAST, after all other preprocessor flags have been specified. |
1108 | * The main difference with CPPSTDIN is that this program will never be a |
1109 | * pointer to a shell wrapper, i.e. it will be empty if no preprocessor is |
1110 | * available directly to the user. Note that it may well be different from |
1111 | * the preprocessor used to compile the C program. |
1112 | */ |
1113 | /* CPPLAST: |
1114 | * This symbol is intended to be used along with CPPRUN in the same manner |
1115 | * symbol CPPMINUS is used with CPPSTDIN. It contains either "-" or "". |
1116 | */ |
1117 | #define CPPSTDIN "" |
1118 | #define CPPMINUS "" |
1119 | #define CPPRUN "" |
1120 | #define CPPLAST "" |
1121 | |
1122 | /* HAS__FWALK: |
1123 | * This symbol, if defined, indicates that the _fwalk system call is |
1124 | * available to apply a function to all the file handles. |
1125 | */ |
1126 | /*#define HAS__FWALK / **/ |
1127 | |
1128 | /* HAS_ACCESS: |
1129 | * This manifest constant lets the C program know that the access() |
1130 | * system call is available to check for accessibility using real UID/GID. |
1131 | * (always present on UNIX.) |
1132 | */ |
1133 | /*#define HAS_ACCESS / **/ |
1134 | |
3ebb1980 |
1135 | /* CASTI32: |
1136 | * This symbol is defined if the C compiler can cast negative |
1137 | * or large floating point numbers to 32-bit ints. |
1138 | */ |
1139 | /*#define CASTI32 / **/ |
1140 | |
1141 | /* CASTNEGFLOAT: |
1142 | * This symbol is defined if the C compiler can cast negative |
1143 | * numbers to unsigned longs, ints and shorts. |
1144 | */ |
1145 | /* CASTFLAGS: |
1146 | * This symbol contains flags that say what difficulties the compiler |
1147 | * has casting odd floating values to unsigned long: |
1148 | * 0 = ok |
1149 | * 1 = couldn't cast < 0 |
1150 | * 2 = couldn't cast >= 0x80000000 |
1151 | * 4 = couldn't cast in argument expression list |
1152 | */ |
1153 | /*#define CASTNEGFLOAT / **/ |
1154 | #define CASTFLAGS 0 /**/ |
1155 | |
a838cfe5 |
1156 | /* HAS_CLASS: |
1157 | * This symbol, if defined, indicates that the class routine is |
1158 | * available to classify doubles. Available for example in AIX. |
1159 | * The returned values are defined in <float.h> and are: |
1160 | * |
1161 | * FP_PLUS_NORM Positive normalized, nonzero |
1162 | * FP_MINUS_NORM Negative normalized, nonzero |
1163 | * FP_PLUS_DENORM Positive denormalized, nonzero |
1164 | * FP_MINUS_DENORM Negative denormalized, nonzero |
1165 | * FP_PLUS_ZERO +0.0 |
1166 | * FP_MINUS_ZERO -0.0 |
1167 | * FP_PLUS_INF +INF |
1168 | * FP_MINUS_INF -INF |
1169 | * FP_NANS Signaling Not a Number (NaNS) |
1170 | * FP_NANQ Quiet Not a Number (NaNQ) |
1171 | */ |
1172 | /*#define HAS_CLASS / **/ |
1173 | |
3ebb1980 |
1174 | /* VOID_CLOSEDIR: |
1175 | * This symbol, if defined, indicates that the closedir() routine |
1176 | * does not return a value. |
1177 | */ |
1178 | /*#define VOID_CLOSEDIR / **/ |
1179 | |
a838cfe5 |
1180 | /* HAS_STRUCT_CMSGHDR: |
1181 | * This symbol, if defined, indicates that the struct cmsghdr |
1182 | * is supported. |
3ebb1980 |
1183 | */ |
a838cfe5 |
1184 | /*#define HAS_STRUCT_CMSGHDR / **/ |
3ebb1980 |
1185 | |
a838cfe5 |
1186 | /* HAS_CSH: |
1187 | * This symbol, if defined, indicates that the C-shell exists. |
3ebb1980 |
1188 | */ |
a838cfe5 |
1189 | /* CSH: |
1190 | * This symbol, if defined, contains the full pathname of csh. |
3ebb1980 |
1191 | */ |
a838cfe5 |
1192 | /*#define HAS_CSH / **/ |
1193 | #ifdef HAS_CSH |
1194 | #define CSH "" /**/ |
e9a8643a |
1195 | #endif |
a838cfe5 |
1196 | |
1197 | /* DLSYM_NEEDS_UNDERSCORE: |
1198 | * This symbol, if defined, indicates that we need to prepend an |
1199 | * underscore to the symbol name before calling dlsym(). This only |
1200 | * makes sense if you *have* dlsym, which we will presume is the |
1201 | * case if you're using dl_dlopen.xs. |
3ebb1980 |
1202 | */ |
a838cfe5 |
1203 | /*#define DLSYM_NEEDS_UNDERSCORE / **/ |
3ebb1980 |
1204 | |
a838cfe5 |
1205 | /* HAS_DRAND48_PROTO: |
1206 | * This symbol, if defined, indicates that the system provides |
1207 | * a prototype for the drand48() function. Otherwise, it is up |
1208 | * to the program to supply one. A good guess is |
c68a00c0 |
1209 | * extern double drand48(void); |
3ebb1980 |
1210 | */ |
a838cfe5 |
1211 | /*#define HAS_DRAND48_PROTO / **/ |
e9a8643a |
1212 | |
a838cfe5 |
1213 | /* HAS_ENDGRENT: |
1214 | * This symbol, if defined, indicates that the getgrent routine is |
1215 | * available for finalizing sequential access of the group database. |
e9a8643a |
1216 | */ |
a838cfe5 |
1217 | /*#define HAS_ENDGRENT / **/ |
e9a8643a |
1218 | |
a838cfe5 |
1219 | /* HAS_ENDHOSTENT: |
1220 | * This symbol, if defined, indicates that the endhostent() routine is |
1221 | * available to close whatever was being used for host queries. |
e9a8643a |
1222 | */ |
a838cfe5 |
1223 | /*#define HAS_ENDHOSTENT / **/ |
e9a8643a |
1224 | |
a838cfe5 |
1225 | /* HAS_ENDNETENT: |
1226 | * This symbol, if defined, indicates that the endnetent() routine is |
1227 | * available to close whatever was being used for network queries. |
e9a8643a |
1228 | */ |
a838cfe5 |
1229 | /*#define HAS_ENDNETENT / **/ |
e9a8643a |
1230 | |
a838cfe5 |
1231 | /* HAS_ENDPROTOENT: |
1232 | * This symbol, if defined, indicates that the endprotoent() routine is |
1233 | * available to close whatever was being used for protocol queries. |
e9a8643a |
1234 | */ |
a838cfe5 |
1235 | /*#define HAS_ENDPROTOENT / **/ |
e9a8643a |
1236 | |
a838cfe5 |
1237 | /* HAS_ENDPWENT: |
1238 | * This symbol, if defined, indicates that the getgrent routine is |
1239 | * available for finalizing sequential access of the passwd database. |
e9a8643a |
1240 | */ |
a838cfe5 |
1241 | /*#define HAS_ENDPWENT / **/ |
e9a8643a |
1242 | |
a838cfe5 |
1243 | /* HAS_ENDSERVENT: |
1244 | * This symbol, if defined, indicates that the endservent() routine is |
1245 | * available to close whatever was being used for service queries. |
e9a8643a |
1246 | */ |
a838cfe5 |
1247 | /*#define HAS_ENDSERVENT / **/ |
3ebb1980 |
1248 | |
b363b713 |
1249 | /* HAS_FCHDIR: |
1250 | * This symbol, if defined, indicates that the fchdir routine is |
1251 | * available to change directory using a file descriptor. |
1252 | */ |
1253 | /*#define HAS_FCHDIR / **/ |
1254 | |
a7fea17f |
1255 | /* FCNTL_CAN_LOCK: |
1256 | * This symbol, if defined, indicates that fcntl() can be used |
1257 | * for file locking. Normally on Unix systems this is defined. |
1258 | * It may be undefined on VMS. |
1259 | */ |
1260 | /*#define FCNTL_CAN_LOCK / **/ |
1261 | |
a838cfe5 |
1262 | /* HAS_FD_SET: |
1263 | * This symbol, when defined, indicates presence of the fd_set typedef |
1264 | * in <sys/types.h> |
1265 | */ |
1266 | /*#define HAS_FD_SET / **/ |
1267 | |
758a5d79 |
1268 | /* HAS_FINITE: |
1269 | * This symbol, if defined, indicates that the finite routine is |
1270 | * available to check whether a double is finite (non-infinity non-NaN). |
1271 | */ |
1272 | /*#define HAS_FINITE / **/ |
1273 | |
1274 | /* HAS_FINITEL: |
1275 | * This symbol, if defined, indicates that the finitel routine is |
1276 | * available to check whether a long double is finite |
1277 | * (non-infinity non-NaN). |
1278 | */ |
1279 | /*#define HAS_FINITEL / **/ |
1280 | |
a838cfe5 |
1281 | /* FLEXFILENAMES: |
1282 | * This symbol, if defined, indicates that the system supports filenames |
1283 | * longer than 14 characters. |
3ebb1980 |
1284 | */ |
a838cfe5 |
1285 | /*#define FLEXFILENAMES / **/ |
3ebb1980 |
1286 | |
758a5d79 |
1287 | /* HAS_FP_CLASS: |
1288 | * This symbol, if defined, indicates that the fp_class routine is |
1289 | * available to classify doubles. Available for example in Digital UNIX. |
1290 | * The returned values are defined in <math.h> and are: |
1291 | * |
1292 | * FP_SNAN Signaling NaN (Not-a-Number) |
1293 | * FP_QNAN Quiet NaN (Not-a-Number) |
1294 | * FP_POS_INF +infinity |
1295 | * FP_NEG_INF -infinity |
1296 | * FP_POS_NORM Positive normalized |
1297 | * FP_NEG_NORM Negative normalized |
1298 | * FP_POS_DENORM Positive denormalized |
1299 | * FP_NEG_DENORM Negative denormalized |
1300 | * FP_POS_ZERO +0.0 (positive zero) |
1301 | * FP_NEG_ZERO -0.0 (negative zero) |
1302 | */ |
1303 | /*#define HAS_FP_CLASS / **/ |
1304 | |
1305 | /* HAS_FPCLASS: |
1306 | * This symbol, if defined, indicates that the fpclass routine is |
1307 | * available to classify doubles. Available for example in Solaris/SVR4. |
1308 | * The returned values are defined in <ieeefp.h> and are: |
1309 | * |
1310 | * FP_SNAN signaling NaN |
1311 | * FP_QNAN quiet NaN |
1312 | * FP_NINF negative infinity |
1313 | * FP_PINF positive infinity |
1314 | * FP_NDENORM negative denormalized non-zero |
1315 | * FP_PDENORM positive denormalized non-zero |
1316 | * FP_NZERO negative zero |
1317 | * FP_PZERO positive zero |
1318 | * FP_NNORM negative normalized non-zero |
1319 | * FP_PNORM positive normalized non-zero |
1320 | */ |
1321 | /*#define HAS_FPCLASS / **/ |
1322 | |
1323 | /* HAS_FPCLASSIFY: |
1324 | * This symbol, if defined, indicates that the fpclassify routine is |
1325 | * available to classify doubles. Available for example in HP-UX. |
1326 | * The returned values are defined in <math.h> and are |
1327 | * |
1328 | * FP_NORMAL Normalized |
1329 | * FP_ZERO Zero |
1330 | * FP_INFINITE Infinity |
1331 | * FP_SUBNORMAL Denormalized |
1332 | * FP_NAN NaN |
1333 | * |
1334 | */ |
a838cfe5 |
1335 | /*#define HAS_FPCLASSIFY / **/ |
e9a8643a |
1336 | |
3ebb1980 |
1337 | /* HAS_FPOS64_T: |
1338 | * This symbol will be defined if the C compiler supports fpos64_t. |
1339 | */ |
1340 | /*#define HAS_FPOS64_T / **/ |
1341 | |
1342 | /* HAS_FREXPL: |
1343 | * This symbol, if defined, indicates that the frexpl routine is |
1344 | * available to break a long double floating-point number into |
1345 | * a normalized fraction and an integral power of 2. |
1346 | */ |
1347 | /*#define HAS_FREXPL / **/ |
1348 | |
1349 | /* HAS_STRUCT_FS_DATA: |
1350 | * This symbol, if defined, indicates that the struct fs_data |
1351 | * to do statfs() is supported. |
1352 | */ |
1353 | /*#define HAS_STRUCT_FS_DATA / **/ |
1354 | |
1355 | /* HAS_FSEEKO: |
1356 | * This symbol, if defined, indicates that the fseeko routine is |
1357 | * available to fseek beyond 32 bits (useful for ILP32 hosts). |
1358 | */ |
1359 | /*#define HAS_FSEEKO / **/ |
1360 | |
1361 | /* HAS_FSTATFS: |
1362 | * This symbol, if defined, indicates that the fstatfs routine is |
1363 | * available to stat filesystems by file descriptors. |
1364 | */ |
1365 | /*#define HAS_FSTATFS / **/ |
e9a8643a |
1366 | |
1367 | /* HAS_FSYNC: |
1368 | * This symbol, if defined, indicates that the fsync routine is |
1369 | * available to write a file's modified data and attributes to |
1370 | * permanent storage. |
3ebb1980 |
1371 | */ |
e9a8643a |
1372 | /*#define HAS_FSYNC / **/ |
1373 | |
1374 | /* HAS_FTELLO: |
1375 | * This symbol, if defined, indicates that the ftello routine is |
1376 | * available to ftell beyond 32 bits (useful for ILP32 hosts). |
1377 | */ |
1378 | /*#define HAS_FTELLO / **/ |
3ebb1980 |
1379 | |
a838cfe5 |
1380 | /* Gconvert: |
1381 | * This preprocessor macro is defined to convert a floating point |
1382 | * number to a string without a trailing decimal point. This |
1383 | * emulates the behavior of sprintf("%g"), but is sometimes much more |
1384 | * efficient. If gconvert() is not available, but gcvt() drops the |
1385 | * trailing decimal point, then gcvt() is used. If all else fails, |
1386 | * a macro using sprintf("%g") is used. Arguments for the Gconvert |
1387 | * macro are: value, number of digits, whether trailing zeros should |
1388 | * be retained, and the output buffer. |
a3c02183 |
1389 | * The usual values are: |
a838cfe5 |
1390 | * d_Gconvert='gconvert((x),(n),(t),(b))' |
1391 | * d_Gconvert='gcvt((x),(n),(b))' |
1392 | * d_Gconvert='sprintf((b),"%.*g",(n),(x))' |
1393 | * The last two assume trailing zeros should not be kept. |
1394 | */ |
1395 | #define Gconvert(x,n,t,b) sprintf((b),"%.*g",(n),(x)) |
1396 | |
3ebb1980 |
1397 | /* HAS_GETCWD: |
1398 | * This symbol, if defined, indicates that the getcwd routine is |
1399 | * available to get the current working directory. |
1400 | */ |
1401 | /*#define HAS_GETCWD / **/ |
1402 | |
1403 | /* HAS_GETESPWNAM: |
1404 | * This symbol, if defined, indicates that the getespwnam system call is |
1405 | * available to retrieve enchanced (shadow) password entries by name. |
1406 | */ |
1407 | /*#define HAS_GETESPWNAM / **/ |
1408 | |
1409 | /* HAS_GETFSSTAT: |
1410 | * This symbol, if defined, indicates that the getfsstat routine is |
1411 | * available to stat filesystems in bulk. |
1412 | */ |
1413 | /*#define HAS_GETFSSTAT / **/ |
1414 | |
a838cfe5 |
1415 | /* HAS_GETGRENT: |
1416 | * This symbol, if defined, indicates that the getgrent routine is |
1417 | * available for sequential access of the group database. |
1418 | */ |
1419 | /*#define HAS_GETGRENT / **/ |
1420 | |
1421 | /* HAS_GETHOSTBYADDR: |
1422 | * This symbol, if defined, indicates that the gethostbyaddr() routine is |
1423 | * available to look up hosts by their IP addresses. |
1424 | */ |
1425 | /*#define HAS_GETHOSTBYADDR / **/ |
1426 | |
1427 | /* HAS_GETHOSTBYNAME: |
1428 | * This symbol, if defined, indicates that the gethostbyname() routine is |
1429 | * available to look up host names in some data base or other. |
1430 | */ |
1431 | /*#define HAS_GETHOSTBYNAME / **/ |
1432 | |
1433 | /* HAS_GETHOSTENT: |
1434 | * This symbol, if defined, indicates that the gethostent() routine is |
1435 | * available to look up host names in some data base or another. |
1436 | */ |
1437 | /*#define HAS_GETHOSTENT / **/ |
1438 | |
1439 | /* HAS_GETHOSTNAME: |
1440 | * This symbol, if defined, indicates that the C program may use the |
1441 | * gethostname() routine to derive the host name. See also HAS_UNAME |
1442 | * and PHOSTNAME. |
1443 | */ |
1444 | /* HAS_UNAME: |
1445 | * This symbol, if defined, indicates that the C program may use the |
1446 | * uname() routine to derive the host name. See also HAS_GETHOSTNAME |
1447 | * and PHOSTNAME. |
1448 | */ |
1449 | /* PHOSTNAME: |
1450 | * This symbol, if defined, indicates the command to feed to the |
1451 | * popen() routine to derive the host name. See also HAS_GETHOSTNAME |
1452 | * and HAS_UNAME. Note that the command uses a fully qualified path, |
1453 | * so that it is safe even if used by a process with super-user |
1454 | * privileges. |
1455 | */ |
1456 | /* HAS_PHOSTNAME: |
1457 | * This symbol, if defined, indicates that the C program may use the |
1458 | * contents of PHOSTNAME as a command to feed to the popen() routine |
1459 | * to derive the host name. |
1460 | */ |
1461 | /*#define HAS_GETHOSTNAME / **/ |
1462 | /*#define HAS_UNAME / **/ |
1463 | /*#define HAS_PHOSTNAME / **/ |
1464 | #ifdef HAS_PHOSTNAME |
1465 | #define PHOSTNAME "" /* How to get the host name */ |
1466 | #endif |
1467 | |
1468 | /* HAS_GETHOST_PROTOS: |
1469 | * This symbol, if defined, indicates that <netdb.h> includes |
1470 | * prototypes for gethostent(), gethostbyname(), and |
1471 | * gethostbyaddr(). Otherwise, it is up to the program to guess |
1472 | * them. See netdbtype.U for probing for various Netdb_xxx_t types. |
1473 | */ |
1474 | /*#define HAS_GETHOST_PROTOS / **/ |
1475 | |
4e0554ec |
1476 | /* HAS_GETITIMER: |
1477 | * This symbol, if defined, indicates that the getitimer routine is |
1478 | * available to return interval timers. |
1479 | */ |
1480 | /*#define HAS_GETITIMER / **/ |
1481 | |
3ebb1980 |
1482 | /* HAS_GETMNT: |
1483 | * This symbol, if defined, indicates that the getmnt routine is |
1484 | * available to get filesystem mount info by filename. |
1485 | */ |
1486 | /*#define HAS_GETMNT / **/ |
1487 | |
1488 | /* HAS_GETMNTENT: |
1489 | * This symbol, if defined, indicates that the getmntent routine is |
1490 | * available to iterate through mounted file systems to get their info. |
1491 | */ |
1492 | /*#define HAS_GETMNTENT / **/ |
1493 | |
a838cfe5 |
1494 | /* HAS_GETNETBYADDR: |
1495 | * This symbol, if defined, indicates that the getnetbyaddr() routine is |
1496 | * available to look up networks by their IP addresses. |
1497 | */ |
1498 | /*#define HAS_GETNETBYADDR / **/ |
1499 | |
1500 | /* HAS_GETNETBYNAME: |
1501 | * This symbol, if defined, indicates that the getnetbyname() routine is |
1502 | * available to look up networks by their names. |
1503 | */ |
1504 | /*#define HAS_GETNETBYNAME / **/ |
1505 | |
1506 | /* HAS_GETNETENT: |
1507 | * This symbol, if defined, indicates that the getnetent() routine is |
1508 | * available to look up network names in some data base or another. |
1509 | */ |
1510 | /*#define HAS_GETNETENT / **/ |
1511 | |
1512 | /* HAS_GETNET_PROTOS: |
1513 | * This symbol, if defined, indicates that <netdb.h> includes |
1514 | * prototypes for getnetent(), getnetbyname(), and |
1515 | * getnetbyaddr(). Otherwise, it is up to the program to guess |
1516 | * them. See netdbtype.U for probing for various Netdb_xxx_t types. |
1517 | */ |
1518 | /*#define HAS_GETNET_PROTOS / **/ |
1519 | |
1520 | /* HAS_GETPAGESIZE: |
1521 | * This symbol, if defined, indicates that the getpagesize system call |
1522 | * is available to get system page size, which is the granularity of |
1523 | * many memory management calls. |
1524 | */ |
1525 | /*#define HAS_GETPAGESIZE / **/ |
1526 | |
1527 | /* HAS_GETPROTOENT: |
1528 | * This symbol, if defined, indicates that the getprotoent() routine is |
1529 | * available to look up protocols in some data base or another. |
1530 | */ |
1531 | /*#define HAS_GETPROTOENT / **/ |
1532 | |
1533 | /* HAS_GETPGRP: |
1534 | * This symbol, if defined, indicates that the getpgrp routine is |
1535 | * available to get the current process group. |
1536 | */ |
1537 | /* USE_BSD_GETPGRP: |
1538 | * This symbol, if defined, indicates that getpgrp needs one |
1539 | * arguments whereas USG one needs none. |
1540 | */ |
1541 | /*#define HAS_GETPGRP / **/ |
1542 | /*#define USE_BSD_GETPGRP / **/ |
1543 | |
1544 | /* HAS_GETPROTOBYNAME: |
1545 | * This symbol, if defined, indicates that the getprotobyname() |
1546 | * routine is available to look up protocols by their name. |
1547 | */ |
1548 | /* HAS_GETPROTOBYNUMBER: |
1549 | * This symbol, if defined, indicates that the getprotobynumber() |
1550 | * routine is available to look up protocols by their number. |
1551 | */ |
1552 | /*#define HAS_GETPROTOBYNAME / **/ |
1553 | /*#define HAS_GETPROTOBYNUMBER / **/ |
1554 | |
1555 | /* HAS_GETPROTO_PROTOS: |
1556 | * This symbol, if defined, indicates that <netdb.h> includes |
1557 | * prototypes for getprotoent(), getprotobyname(), and |
1558 | * getprotobyaddr(). Otherwise, it is up to the program to guess |
1559 | * them. See netdbtype.U for probing for various Netdb_xxx_t types. |
1560 | */ |
1561 | /*#define HAS_GETPROTO_PROTOS / **/ |
1562 | |
3ebb1980 |
1563 | /* HAS_GETPRPWNAM: |
1564 | * This symbol, if defined, indicates that the getprpwnam system call is |
1565 | * available to retrieve protected (shadow) password entries by name. |
1566 | */ |
1567 | /*#define HAS_GETPRPWNAM / **/ |
1568 | |
a838cfe5 |
1569 | /* HAS_GETPWENT: |
1570 | * This symbol, if defined, indicates that the getpwent routine is |
1571 | * available for sequential access of the passwd database. |
1572 | * If this is not available, the older getpw() function may be available. |
1573 | */ |
1574 | /*#define HAS_GETPWENT / **/ |
1575 | |
1576 | /* HAS_GETSERVENT: |
1577 | * This symbol, if defined, indicates that the getservent() routine is |
1578 | * available to look up network services in some data base or another. |
1579 | */ |
1580 | /*#define HAS_GETSERVENT / **/ |
1581 | |
1582 | /* HAS_GETSERV_PROTOS: |
1583 | * This symbol, if defined, indicates that <netdb.h> includes |
1584 | * prototypes for getservent(), getservbyname(), and |
1585 | * getservbyaddr(). Otherwise, it is up to the program to guess |
1586 | * them. See netdbtype.U for probing for various Netdb_xxx_t types. |
1587 | */ |
1588 | /*#define HAS_GETSERV_PROTOS / **/ |
1589 | |
3ebb1980 |
1590 | /* HAS_GETSPNAM: |
1591 | * This symbol, if defined, indicates that the getspnam system call is |
1592 | * available to retrieve SysV shadow password entries by name. |
1593 | */ |
1594 | /*#define HAS_GETSPNAM / **/ |
1595 | |
a838cfe5 |
1596 | /* HAS_GETSERVBYNAME: |
1597 | * This symbol, if defined, indicates that the getservbyname() |
1598 | * routine is available to look up services by their name. |
1599 | */ |
1600 | /* HAS_GETSERVBYPORT: |
1601 | * This symbol, if defined, indicates that the getservbyport() |
1602 | * routine is available to look up services by their port. |
1603 | */ |
1604 | /*#define HAS_GETSERVBYNAME / **/ |
1605 | /*#define HAS_GETSERVBYPORT / **/ |
1606 | |
1607 | /* HAS_GNULIBC: |
1608 | * This symbol, if defined, indicates to the C program that |
1609 | * the GNU C library is being used. |
1610 | */ |
1611 | /*#define HAS_GNULIBC / **/ |
1612 | #if defined(HAS_GNULIBC) && !defined(_GNU_SOURCE) |
1613 | # define _GNU_SOURCE |
1614 | #endif |
3ebb1980 |
1615 | /* HAS_HASMNTOPT: |
1616 | * This symbol, if defined, indicates that the hasmntopt routine is |
1617 | * available to query the mount options of file systems. |
1618 | */ |
1619 | /*#define HAS_HASMNTOPT / **/ |
1620 | |
a838cfe5 |
1621 | /* HAS_HTONL: |
1622 | * This symbol, if defined, indicates that the htonl() routine (and |
1623 | * friends htons() ntohl() ntohs()) are available to do network |
1624 | * order byte swapping. |
1625 | */ |
1626 | /* HAS_HTONS: |
1627 | * This symbol, if defined, indicates that the htons() routine (and |
1628 | * friends htonl() ntohl() ntohs()) are available to do network |
1629 | * order byte swapping. |
1630 | */ |
1631 | /* HAS_NTOHL: |
1632 | * This symbol, if defined, indicates that the ntohl() routine (and |
1633 | * friends htonl() htons() ntohs()) are available to do network |
1634 | * order byte swapping. |
1635 | */ |
1636 | /* HAS_NTOHS: |
1637 | * This symbol, if defined, indicates that the ntohs() routine (and |
1638 | * friends htonl() htons() ntohl()) are available to do network |
1639 | * order byte swapping. |
1640 | */ |
1641 | /*#define HAS_HTONL / **/ |
1642 | /*#define HAS_HTONS / **/ |
1643 | /*#define HAS_NTOHL / **/ |
1644 | /*#define HAS_NTOHS / **/ |
1645 | |
3ebb1980 |
1646 | /* HAS_INT64_T: |
1647 | * This symbol will defined if the C compiler supports int64_t. |
1648 | * Usually the <inttypes.h> needs to be included, but sometimes |
1649 | * <sys/types.h> is enough. |
1650 | */ |
1651 | /*#define HAS_INT64_T / **/ |
1652 | |
a838cfe5 |
1653 | /* HAS_ISASCII: |
1654 | * This manifest constant lets the C program know that isascii |
1655 | * is available. |
1656 | */ |
1657 | /*#define HAS_ISASCII / **/ |
1658 | |
758a5d79 |
1659 | /* HAS_ISFINITE: |
1660 | * This symbol, if defined, indicates that the isfinite routine is |
1661 | * available to check whether a double is finite (non-infinity non-NaN). |
1662 | */ |
1663 | /*#define HAS_ISFINITE / **/ |
1664 | |
1665 | /* HAS_ISINF: |
1666 | * This symbol, if defined, indicates that the isinf routine is |
1667 | * available to check whether a double is an infinity. |
1668 | */ |
1669 | /*#define HAS_ISINF / **/ |
1670 | |
3ebb1980 |
1671 | /* HAS_ISNAN: |
1672 | * This symbol, if defined, indicates that the isnan routine is |
1673 | * available to check whether a double is a NaN. |
1674 | */ |
1675 | /*#define HAS_ISNAN / **/ |
1676 | |
e9a8643a |
1677 | /* HAS_ISNANL: |
1678 | * This symbol, if defined, indicates that the isnanl routine is |
1679 | * available to check whether a long double is a NaN. |
3ebb1980 |
1680 | */ |
a838cfe5 |
1681 | /*#define HAS_ISNANL / **/ |
1682 | |
1683 | /* HAS_LCHOWN: |
1684 | * This symbol, if defined, indicates that the lchown routine is |
1685 | * available to operate on a symbolic link (instead of following the |
1686 | * link). |
1687 | */ |
1688 | /*#define HAS_LCHOWN / **/ |
1689 | |
1690 | /* HAS_LDBL_DIG: |
1691 | * This symbol, if defined, indicates that this system's <float.h> |
1692 | * or <limits.h> defines the symbol LDBL_DIG, which is the number |
1693 | * of significant digits in a long double precision number. Unlike |
1694 | * for DBL_DIG, there's no good guess for LDBL_DIG if it is undefined. |
1695 | */ |
1696 | /*#define HAS_LDBL_DIG / * */ |
1697 | |
1698 | /* HAS_LONG_DOUBLE: |
1699 | * This symbol will be defined if the C compiler supports long |
1700 | * doubles. |
1701 | */ |
1702 | /* LONG_DOUBLESIZE: |
1703 | * This symbol contains the size of a long double, so that the |
1704 | * C preprocessor can make decisions based on it. It is only |
1705 | * defined if the system supports long doubles. |
1706 | */ |
1707 | /*#define HAS_LONG_DOUBLE / **/ |
1708 | #ifdef HAS_LONG_DOUBLE |
1709 | #define LONG_DOUBLESIZE 8 /**/ |
1710 | #endif |
1711 | |
1712 | /* HAS_LONG_LONG: |
1713 | * This symbol will be defined if the C compiler supports long long. |
1714 | */ |
1715 | /* LONGLONGSIZE: |
1716 | * This symbol contains the size of a long long, so that the |
1717 | * C preprocessor can make decisions based on it. It is only |
1718 | * defined if the system supports long long. |
1719 | */ |
1720 | /*#define HAS_LONG_LONG / **/ |
1721 | #ifdef HAS_LONG_LONG |
1722 | #define LONGLONGSIZE 8 /**/ |
1723 | #endif |
3ebb1980 |
1724 | |
a838cfe5 |
1725 | /* HAS_LSEEK_PROTO: |
1726 | * This symbol, if defined, indicates that the system provides |
1727 | * a prototype for the lseek() function. Otherwise, it is up |
1728 | * to the program to supply one. A good guess is |
1729 | * extern off_t lseek(int, off_t, int); |
3ebb1980 |
1730 | */ |
a838cfe5 |
1731 | /*#define HAS_LSEEK_PROTO / **/ |
3ebb1980 |
1732 | |
1733 | /* HAS_MADVISE: |
1734 | * This symbol, if defined, indicates that the madvise system call is |
1735 | * available to map a file into memory. |
1736 | */ |
1737 | /*#define HAS_MADVISE / **/ |
1738 | |
a838cfe5 |
1739 | /* HAS_MEMCHR: |
1740 | * This symbol, if defined, indicates that the memchr routine is available |
1741 | * to locate characters within a C string. |
1742 | */ |
1743 | /*#define HAS_MEMCHR / **/ |
1744 | |
3ebb1980 |
1745 | /* HAS_MKDTEMP: |
1746 | * This symbol, if defined, indicates that the mkdtemp routine is |
1747 | * available to exclusively create a uniquely named temporary directory. |
1748 | */ |
1749 | /*#define HAS_MKDTEMP / **/ |
1750 | |
a838cfe5 |
1751 | /* HAS_MKSTEMP: |
1752 | * This symbol, if defined, indicates that the mkstemp routine is |
1753 | * available to exclusively create and open a uniquely named |
1754 | * temporary file. |
1755 | */ |
1756 | /*#define HAS_MKSTEMP / **/ |
1757 | |
3ebb1980 |
1758 | /* HAS_MKSTEMPS: |
1759 | * This symbol, if defined, indicates that the mkstemps routine is |
1760 | * available to excluslvely create and open a uniquely named |
1761 | * (with a suffix) temporary file. |
1762 | */ |
1763 | /*#define HAS_MKSTEMPS / **/ |
1764 | |
a838cfe5 |
1765 | /* HAS_MMAP: |
1766 | * This symbol, if defined, indicates that the mmap system call is |
1767 | * available to map a file into memory. |
1768 | */ |
1769 | /* Mmap_t: |
1770 | * This symbol holds the return type of the mmap() system call |
1771 | * (and simultaneously the type of the first argument). |
1772 | * Usually set to 'void *' or 'cadd_t'. |
1773 | */ |
1774 | /*#define HAS_MMAP / **/ |
1775 | #define Mmap_t /**/ |
1776 | |
3ebb1980 |
1777 | /* HAS_MODFL: |
1778 | * This symbol, if defined, indicates that the modfl routine is |
1779 | * available to split a long double x into a fractional part f and |
1780 | * an integer part i such that |f| < 1.0 and (f + i) = x. |
1781 | */ |
e67aeab1 |
1782 | /* HAS_MODFL_POW32_BUG: |
1783 | * This symbol, if defined, indicates that the modfl routine is |
1784 | * broken for long doubles >= pow(2, 32). |
1785 | * For example from 4294967303.150000 one would get 4294967302.000000 |
1786 | * and 1.150000. The bug has been seen in certain versions of glibc, |
1787 | * release 2.2.2 is known to be okay. |
1788 | */ |
3ebb1980 |
1789 | /*#define HAS_MODFL / **/ |
e67aeab1 |
1790 | /*#define HAS_MODFL_POW32_BUG / **/ |
3ebb1980 |
1791 | |
1792 | /* HAS_MPROTECT: |
1793 | * This symbol, if defined, indicates that the mprotect system call is |
1794 | * available to modify the access protection of a memory mapped file. |
1795 | */ |
1796 | /*#define HAS_MPROTECT / **/ |
1797 | |
a838cfe5 |
1798 | /* HAS_MSG: |
1799 | * This symbol, if defined, indicates that the entire msg*(2) library is |
1800 | * supported (IPC mechanism based on message queues). |
1801 | */ |
1802 | /*#define HAS_MSG / **/ |
1803 | |
4e0554ec |
1804 | /* HAS_STRUCT_MSGHDR: |
1805 | * This symbol, if defined, indicates that the struct msghdr |
1806 | * is supported. |
1807 | */ |
1808 | /*#define HAS_STRUCT_MSGHDR / **/ |
1809 | |
3ebb1980 |
1810 | /* HAS_OFF64_T: |
1811 | * This symbol will be defined if the C compiler supports off64_t. |
1812 | */ |
1813 | /*#define HAS_OFF64_T / **/ |
1814 | |
a838cfe5 |
1815 | /* HAS_OPEN3: |
1816 | * This manifest constant lets the C program know that the three |
1817 | * argument form of open(2) is available. |
1818 | */ |
1819 | /*#define HAS_OPEN3 / **/ |
1820 | |
1821 | /* OLD_PTHREAD_CREATE_JOINABLE: |
1822 | * This symbol, if defined, indicates how to create pthread |
1823 | * in joinable (aka undetached) state. NOTE: not defined |
1824 | * if pthread.h already has defined PTHREAD_CREATE_JOINABLE |
1825 | * (the new version of the constant). |
1826 | * If defined, known values are PTHREAD_CREATE_UNDETACHED |
1827 | * and __UNDETACHED. |
1828 | */ |
1829 | /*#define OLD_PTHREAD_CREATE_JOINABLE / **/ |
1830 | |
1831 | /* HAS_PTHREAD_YIELD: |
1832 | * This symbol, if defined, indicates that the pthread_yield |
1833 | * routine is available to yield the execution of the current |
1834 | * thread. sched_yield is preferable to pthread_yield. |
1835 | */ |
1836 | /* SCHED_YIELD: |
1837 | * This symbol defines the way to yield the execution of |
1838 | * the current thread. Known ways are sched_yield, |
1839 | * pthread_yield, and pthread_yield with NULL. |
1840 | */ |
1841 | /* HAS_SCHED_YIELD: |
1842 | * This symbol, if defined, indicates that the sched_yield |
1843 | * routine is available to yield the execution of the current |
1844 | * thread. sched_yield is preferable to pthread_yield. |
1845 | */ |
1846 | /*#define HAS_PTHREAD_YIELD / **/ |
1847 | #define SCHED_YIELD sched_yield() /**/ |
1848 | /*#define HAS_SCHED_YIELD / **/ |
1849 | |
4e0554ec |
1850 | /* HAS_READV: |
1851 | * This symbol, if defined, indicates that the readv routine is |
1852 | * available to do gather reads. You will also need <sys/uio.h> |
1853 | * and there I_SYSUIO. |
1854 | */ |
1855 | /*#define HAS_READV / **/ |
1856 | |
1857 | /* HAS_RECVMSG: |
1858 | * This symbol, if defined, indicates that the recvmsg routine is |
1859 | * available to send structured socket messages. |
1860 | */ |
1861 | /*#define HAS_RECVMSG / **/ |
1862 | |
a838cfe5 |
1863 | /* HAS_SAFE_BCOPY: |
1864 | * This symbol, if defined, indicates that the bcopy routine is available |
1865 | * to copy potentially overlapping memory blocks. Normally, you should |
1866 | * probably use memmove() or memcpy(). If neither is defined, roll your |
1867 | * own version. |
1868 | */ |
1869 | /*#define HAS_SAFE_BCOPY / **/ |
1870 | |
1871 | /* HAS_SAFE_MEMCPY: |
1872 | * This symbol, if defined, indicates that the memcpy routine is available |
1873 | * to copy potentially overlapping memory blocks. If you need to |
1874 | * copy overlapping memory blocks, you should check HAS_MEMMOVE and |
1875 | * use memmove() instead, if available. |
1876 | */ |
1877 | /*#define HAS_SAFE_MEMCPY / **/ |
1878 | |
1879 | /* HAS_SANE_MEMCMP: |
1880 | * This symbol, if defined, indicates that the memcmp routine is available |
1881 | * and can be used to compare relative magnitudes of chars with their high |
1882 | * bits set. If it is not defined, roll your own version. |
1883 | */ |
1884 | /*#define HAS_SANE_MEMCMP / **/ |
1885 | |
a7fea17f |
1886 | /* HAS_SBRK_PROTO: |
1887 | * This symbol, if defined, indicates that the system provides |
1888 | * a prototype for the sbrk() function. Otherwise, it is up |
1889 | * to the program to supply one. Good guesses are |
c68a00c0 |
1890 | * extern void* sbrk(int); |
1891 | * extern void* sbrk(size_t); |
a7fea17f |
1892 | */ |
a838cfe5 |
1893 | /*#define HAS_SBRK_PROTO / **/ |
1894 | |
1895 | /* HAS_SEM: |
1896 | * This symbol, if defined, indicates that the entire sem*(2) library is |
1897 | * supported. |
1898 | */ |
1899 | /*#define HAS_SEM / **/ |
1900 | |
1901 | /* HAS_SENDMSG: |
1902 | * This symbol, if defined, indicates that the sendmsg routine is |
1903 | * available to send structured socket messages. |
1904 | */ |
1905 | /*#define HAS_SENDMSG / **/ |
1906 | |
1907 | /* HAS_SETGRENT: |
1908 | * This symbol, if defined, indicates that the setgrent routine is |
1909 | * available for initializing sequential access of the group database. |
1910 | */ |
1911 | /*#define HAS_SETGRENT / **/ |
1912 | |
1913 | /* HAS_SETGROUPS: |
1914 | * This symbol, if defined, indicates that the setgroups() routine is |
1915 | * available to set the list of process groups. If unavailable, multiple |
1916 | * groups are probably not supported. |
1917 | */ |
1918 | /*#define HAS_SETGROUPS / **/ |
1919 | |
1920 | /* HAS_SETHOSTENT: |
1921 | * This symbol, if defined, indicates that the sethostent() routine is |
1922 | * available. |
1923 | */ |
1924 | /*#define HAS_SETHOSTENT / **/ |
1925 | |
1926 | /* HAS_SETITIMER: |
1927 | * This symbol, if defined, indicates that the setitimer routine is |
1928 | * available to set interval timers. |
1929 | */ |
1930 | /*#define HAS_SETITIMER / **/ |
1931 | |
1932 | /* HAS_SETNETENT: |
1933 | * This symbol, if defined, indicates that the setnetent() routine is |
1934 | * available. |
1935 | */ |
1936 | /*#define HAS_SETNETENT / **/ |
1937 | |
1938 | /* HAS_SETPROTOENT: |
1939 | * This symbol, if defined, indicates that the setprotoent() routine is |
1940 | * available. |
1941 | */ |
1942 | /*#define HAS_SETPROTOENT / **/ |
1943 | |
1944 | /* HAS_SETPGRP: |
1945 | * This symbol, if defined, indicates that the setpgrp routine is |
1946 | * available to set the current process group. |
1947 | */ |
1948 | /* USE_BSD_SETPGRP: |
1949 | * This symbol, if defined, indicates that setpgrp needs two |
1950 | * arguments whereas USG one needs none. See also HAS_SETPGID |
1951 | * for a POSIX interface. |
1952 | */ |
1953 | /*#define HAS_SETPGRP / **/ |
1954 | /*#define USE_BSD_SETPGRP / **/ |
1955 | |
1956 | /* HAS_SETPROCTITLE: |
1957 | * This symbol, if defined, indicates that the setproctitle routine is |
1958 | * available to set process title. |
1959 | */ |
1960 | /*#define HAS_SETPROCTITLE / **/ |
1961 | |
1962 | /* HAS_SETPWENT: |
1963 | * This symbol, if defined, indicates that the setpwent routine is |
1964 | * available for initializing sequential access of the passwd database. |
1965 | */ |
1966 | /*#define HAS_SETPWENT / **/ |
1967 | |
1968 | /* HAS_SETSERVENT: |
1969 | * This symbol, if defined, indicates that the setservent() routine is |
1970 | * available. |
1971 | */ |
1972 | /*#define HAS_SETSERVENT / **/ |
1973 | |
1974 | /* HAS_SETVBUF: |
1975 | * This symbol, if defined, indicates that the setvbuf routine is |
1976 | * available to change buffering on an open stdio stream. |
1977 | * to a line-buffered mode. |
1978 | */ |
1979 | /*#define HAS_SETVBUF / **/ |
1980 | |
1981 | /* USE_SFIO: |
1982 | * This symbol, if defined, indicates that sfio should |
1983 | * be used. |
1984 | */ |
1985 | /*#define USE_SFIO / **/ |
1986 | |
1987 | /* HAS_SHM: |
1988 | * This symbol, if defined, indicates that the entire shm*(2) library is |
1989 | * supported. |
1990 | */ |
1991 | /*#define HAS_SHM / **/ |
1992 | |
1993 | /* HAS_SIGACTION: |
1994 | * This symbol, if defined, indicates that Vr4's sigaction() routine |
1995 | * is available. |
1996 | */ |
1997 | /*#define HAS_SIGACTION / **/ |
1998 | |
1999 | /* HAS_SIGSETJMP: |
2000 | * This variable indicates to the C program that the sigsetjmp() |
2001 | * routine is available to save the calling process's registers |
2002 | * and stack environment for later use by siglongjmp(), and |
2003 | * to optionally save the process's signal mask. See |
2004 | * Sigjmp_buf, Sigsetjmp, and Siglongjmp. |
2005 | */ |
2006 | /* Sigjmp_buf: |
2007 | * This is the buffer type to be used with Sigsetjmp and Siglongjmp. |
2008 | */ |
2009 | /* Sigsetjmp: |
2010 | * This macro is used in the same way as sigsetjmp(), but will invoke |
2011 | * traditional setjmp() if sigsetjmp isn't available. |
2012 | * See HAS_SIGSETJMP. |
2013 | */ |
2014 | /* Siglongjmp: |
2015 | * This macro is used in the same way as siglongjmp(), but will invoke |
2016 | * traditional longjmp() if siglongjmp isn't available. |
2017 | * See HAS_SIGSETJMP. |
2018 | */ |
2019 | /*#define HAS_SIGSETJMP / **/ |
2020 | #ifdef HAS_SIGSETJMP |
2021 | #define Sigjmp_buf sigjmp_buf |
2022 | #define Sigsetjmp(buf,save_mask) sigsetjmp((buf),(save_mask)) |
2023 | #define Siglongjmp(buf,retval) siglongjmp((buf),(retval)) |
2024 | #else |
2025 | #define Sigjmp_buf jmp_buf |
2026 | #define Sigsetjmp(buf,save_mask) setjmp((buf)) |
2027 | #define Siglongjmp(buf,retval) longjmp((buf),(retval)) |
2028 | #endif |
2029 | |
2030 | /* HAS_SOCKET: |
2031 | * This symbol, if defined, indicates that the BSD socket interface is |
2032 | * supported. |
2033 | */ |
2034 | /* HAS_SOCKETPAIR: |
2035 | * This symbol, if defined, indicates that the BSD socketpair() call is |
2036 | * supported. |
3ebb1980 |
2037 | */ |
a838cfe5 |
2038 | /* HAS_MSG_CTRUNC: |
2039 | * This symbol, if defined, indicates that the MSG_CTRUNC is supported. |
2040 | * Checking just with #ifdef might not be enough because this symbol |
2041 | * has been known to be an enum. |
3ebb1980 |
2042 | */ |
a838cfe5 |
2043 | /* HAS_MSG_DONTROUTE: |
2044 | * This symbol, if defined, indicates that the MSG_DONTROUTE is supported. |
2045 | * Checking just with #ifdef might not be enough because this symbol |
2046 | * has been known to be an enum. |
3ebb1980 |
2047 | */ |
a838cfe5 |
2048 | /* HAS_MSG_OOB: |
2049 | * This symbol, if defined, indicates that the MSG_OOB is supported. |
2050 | * Checking just with #ifdef might not be enough because this symbol |
2051 | * has been known to be an enum. |
3ebb1980 |
2052 | */ |
a838cfe5 |
2053 | /* HAS_MSG_PEEK: |
2054 | * This symbol, if defined, indicates that the MSG_PEEK is supported. |
2055 | * Checking just with #ifdef might not be enough because this symbol |
2056 | * has been known to be an enum. |
3ebb1980 |
2057 | */ |
a838cfe5 |
2058 | /* HAS_MSG_PROXY: |
2059 | * This symbol, if defined, indicates that the MSG_PROXY is supported. |
2060 | * Checking just with #ifdef might not be enough because this symbol |
2061 | * has been known to be an enum. |
3ebb1980 |
2062 | */ |
a838cfe5 |
2063 | /* HAS_SCM_RIGHTS: |
2064 | * This symbol, if defined, indicates that the SCM_RIGHTS is supported. |
2065 | * Checking just with #ifdef might not be enough because this symbol |
2066 | * has been known to be an enum. |
3ebb1980 |
2067 | */ |
a838cfe5 |
2068 | /*#define HAS_SOCKET / **/ |
2069 | /*#define HAS_SOCKETPAIR / **/ |
2070 | /*#define HAS_MSG_CTRUNC / **/ |
2071 | /*#define HAS_MSG_DONTROUTE / **/ |
2072 | /*#define HAS_MSG_OOB / **/ |
2073 | /*#define HAS_MSG_PEEK / **/ |
2074 | /*#define HAS_MSG_PROXY / **/ |
2075 | /*#define HAS_SCM_RIGHTS / **/ |
3ebb1980 |
2076 | |
1b9c9cf5 |
2077 | /* HAS_SOCKS5_INIT: |
2078 | * This symbol, if defined, indicates that the socks5_init routine is |
2079 | * available to initialize SOCKS 5. |
2080 | */ |
2081 | /*#define HAS_SOCKS5_INIT / **/ |
2082 | |
3ebb1980 |
2083 | /* HAS_SQRTL: |
2084 | * This symbol, if defined, indicates that the sqrtl routine is |
2085 | * available to do long double square roots. |
2086 | */ |
2087 | /*#define HAS_SQRTL / **/ |
2088 | |
a838cfe5 |
2089 | /* USE_STAT_BLOCKS: |
2090 | * This symbol is defined if this system has a stat structure declaring |
2091 | * st_blksize and st_blocks. |
e9a8643a |
2092 | */ |
a838cfe5 |
2093 | #ifndef USE_STAT_BLOCKS |
2094 | /*#define USE_STAT_BLOCKS / **/ |
2095 | #endif |
3ebb1980 |
2096 | |
2097 | /* HAS_STRUCT_STATFS_F_FLAGS: |
2098 | * This symbol, if defined, indicates that the struct statfs |
2099 | * does have the f_flags member containing the mount flags of |
2100 | * the filesystem containing the file. |
2101 | * This kind of struct statfs is coming from <sys/mount.h> (BSD 4.3), |
2102 | * not from <sys/statfs.h> (SYSV). Older BSDs (like Ultrix) do not |
2103 | * have statfs() and struct statfs, they have ustat() and getmnt() |
2104 | * with struct ustat and struct fs_data. |
2105 | */ |
2106 | /*#define HAS_STRUCT_STATFS_F_FLAGS / **/ |
2107 | |
2108 | /* HAS_STRUCT_STATFS: |
2109 | * This symbol, if defined, indicates that the struct statfs |
2110 | * to do statfs() is supported. |
2111 | */ |
2112 | /*#define HAS_STRUCT_STATFS / **/ |
2113 | |
2114 | /* HAS_FSTATVFS: |
2115 | * This symbol, if defined, indicates that the fstatvfs routine is |
2116 | * available to stat filesystems by file descriptors. |
2117 | */ |
2118 | /*#define HAS_FSTATVFS / **/ |
2119 | |
a838cfe5 |
2120 | /* USE_STDIO_PTR: |
2121 | * This symbol is defined if the _ptr and _cnt fields (or similar) |
2122 | * of the stdio FILE structure can be used to access the stdio buffer |
2123 | * for a file handle. If this is defined, then the FILE_ptr(fp) |
2124 | * and FILE_cnt(fp) macros will also be defined and should be used |
2125 | * to access these fields. |
3ebb1980 |
2126 | */ |
a838cfe5 |
2127 | /* FILE_ptr: |
2128 | * This macro is used to access the _ptr field (or equivalent) of the |
2129 | * FILE structure pointed to by its argument. This macro will always be |
2130 | * defined if USE_STDIO_PTR is defined. |
2131 | */ |
2132 | /* STDIO_PTR_LVALUE: |
2133 | * This symbol is defined if the FILE_ptr macro can be used as an |
2134 | * lvalue. |
2135 | */ |
2136 | /* FILE_cnt: |
2137 | * This macro is used to access the _cnt field (or equivalent) of the |
2138 | * FILE structure pointed to by its argument. This macro will always be |
2139 | * defined if USE_STDIO_PTR is defined. |
2140 | */ |
2141 | /* STDIO_CNT_LVALUE: |
2142 | * This symbol is defined if the FILE_cnt macro can be used as an |
2143 | * lvalue. |
2144 | */ |
2145 | /* STDIO_PTR_LVAL_SETS_CNT: |
2146 | * This symbol is defined if using the FILE_ptr macro as an lvalue |
2147 | * to increase the pointer by n has the side effect of decreasing the |
2148 | * value of File_cnt(fp) by n. |
2149 | */ |
2150 | /* STDIO_PTR_LVAL_NOCHANGE_CNT: |
2151 | * This symbol is defined if using the FILE_ptr macro as an lvalue |
2152 | * to increase the pointer by n leaves File_cnt(fp) unchanged. |
2153 | */ |
2154 | /*#define USE_STDIO_PTR / **/ |
2155 | #ifdef USE_STDIO_PTR |
2156 | #define FILE_ptr(fp) ((fp)->_IO_read_ptr) |
2157 | /*#define STDIO_PTR_LVALUE / **/ |
2158 | #define FILE_cnt(fp) ((fp)->_IO_read_end - (fp)->_IO_read_ptr) |
2159 | /*#define STDIO_CNT_LVALUE / **/ |
2160 | /*#define STDIO_PTR_LVAL_SETS_CNT / **/ |
2161 | /*#define STDIO_PTR_LVAL_NOCHANGE_CNT / **/ |
2162 | #endif |
2163 | |
2164 | /* USE_STDIO_BASE: |
2165 | * This symbol is defined if the _base field (or similar) of the |
2166 | * stdio FILE structure can be used to access the stdio buffer for |
2167 | * a file handle. If this is defined, then the FILE_base(fp) macro |
2168 | * will also be defined and should be used to access this field. |
2169 | * Also, the FILE_bufsiz(fp) macro will be defined and should be used |
2170 | * to determine the number of bytes in the buffer. USE_STDIO_BASE |
2171 | * will never be defined unless USE_STDIO_PTR is. |
2172 | */ |
2173 | /* FILE_base: |
2174 | * This macro is used to access the _base field (or equivalent) of the |
2175 | * FILE structure pointed to by its argument. This macro will always be |
2176 | * defined if USE_STDIO_BASE is defined. |
2177 | */ |
2178 | /* FILE_bufsiz: |
2179 | * This macro is used to determine the number of bytes in the I/O |
2180 | * buffer pointed to by _base field (or equivalent) of the FILE |
2181 | * structure pointed to its argument. This macro will always be defined |
2182 | * if USE_STDIO_BASE is defined. |
2183 | */ |
2184 | /*#define USE_STDIO_BASE / **/ |
2185 | #ifdef USE_STDIO_BASE |
2186 | #define FILE_base(fp) ((fp)->_IO_read_base) |
2187 | #define FILE_bufsiz(fp) ((fp)->_IO_read_end - (fp)->_IO_read_base) |
2188 | #endif |
2189 | |
2190 | /* HAS_STRERROR: |
2191 | * This symbol, if defined, indicates that the strerror routine is |
2192 | * available to translate error numbers to strings. See the writeup |
2193 | * of Strerror() in this file before you try to define your own. |
2194 | */ |
2195 | /* HAS_SYS_ERRLIST: |
2196 | * This symbol, if defined, indicates that the sys_errlist array is |
2197 | * available to translate error numbers to strings. The extern int |
2198 | * sys_nerr gives the size of that table. |
2199 | */ |
2200 | /* Strerror: |
2201 | * This preprocessor symbol is defined as a macro if strerror() is |
2202 | * not available to translate error numbers to strings but sys_errlist[] |
2203 | * array is there. |
2204 | */ |
2205 | /*#define HAS_STRERROR / **/ |
2206 | /*#define HAS_SYS_ERRLIST / **/ |
2207 | #define Strerror(e) strerror(e) |
3ebb1980 |
2208 | |
2209 | /* HAS_STRTOLD: |
2210 | * This symbol, if defined, indicates that the strtold routine is |
2211 | * available to convert strings to long doubles. |
2212 | */ |
2213 | /*#define HAS_STRTOLD / **/ |
2214 | |
2215 | /* HAS_STRTOLL: |
2216 | * This symbol, if defined, indicates that the strtoll routine is |
2217 | * available to convert strings to long longs. |
2218 | */ |
2219 | /*#define HAS_STRTOLL / **/ |
2220 | |
d0e6d399 |
2221 | /* HAS_STRTOQ: |
2222 | * This symbol, if defined, indicates that the strtoq routine is |
2223 | * available to convert strings to long longs (quads). |
2224 | */ |
ef71a6f5 |
2225 | /*#define HAS_STRTOQ / **/ |
28e5dec8 |
2226 | |
a838cfe5 |
2227 | /* HAS_STRTOUL: |
2228 | * This symbol, if defined, indicates that the strtoul routine is |
2229 | * available to provide conversion of strings to unsigned long. |
2230 | */ |
2231 | /*#define HAS_STRTOUL / **/ |
2232 | |
3ebb1980 |
2233 | /* HAS_STRTOULL: |
2234 | * This symbol, if defined, indicates that the strtoull routine is |
2235 | * available to convert strings to unsigned long longs. |
2236 | */ |
2237 | /*#define HAS_STRTOULL / **/ |
2238 | |
2239 | /* HAS_STRTOUQ: |
2240 | * This symbol, if defined, indicates that the strtouq routine is |
2241 | * available to convert strings to unsigned long longs (quads). |
2242 | */ |
2243 | /*#define HAS_STRTOUQ / **/ |
2244 | |
2245 | /* HAS_TELLDIR_PROTO: |
2246 | * This symbol, if defined, indicates that the system provides |
2247 | * a prototype for the telldir() function. Otherwise, it is up |
2248 | * to the program to supply one. A good guess is |
c68a00c0 |
2249 | * extern long telldir(DIR*); |
3ebb1980 |
2250 | */ |
2251 | /*#define HAS_TELLDIR_PROTO / **/ |
2252 | |
a838cfe5 |
2253 | /* Time_t: |
2254 | * This symbol holds the type returned by time(). It can be long, |
2255 | * or time_t on BSD sites (in which case <sys/types.h> should be |
2256 | * included). |
3ebb1980 |
2257 | */ |
a838cfe5 |
2258 | #define Time_t int /* Time type */ |
2259 | |
2260 | /* HAS_TIMES: |
2261 | * This symbol, if defined, indicates that the times() routine exists. |
2262 | * Note that this became obsolete on some systems (SUNOS), which now |
2263 | * use getrusage(). It may be necessary to include <sys/times.h>. |
2264 | */ |
2265 | /*#define HAS_TIMES / **/ |
3ebb1980 |
2266 | |
4e0554ec |
2267 | /* HAS_UALARM: |
2268 | * This symbol, if defined, indicates that the ualarm routine is |
2269 | * available to do alarms with microsecond granularity. |
2270 | */ |
2271 | /*#define HAS_UALARM / **/ |
2272 | |
a838cfe5 |
2273 | /* HAS_UNION_SEMUN: |
2274 | * This symbol, if defined, indicates that the union semun is |
2275 | * defined by including <sys/sem.h>. If not, the user code |
2276 | * probably needs to define it as: |
2277 | * union semun { |
2278 | * int val; |
2279 | * struct semid_ds *buf; |
2280 | * unsigned short *array; |
2281 | * } |
2282 | */ |
2283 | /* USE_SEMCTL_SEMUN: |
2284 | * This symbol, if defined, indicates that union semun is |
2285 | * used for semctl IPC_STAT. |
2286 | */ |
2287 | /* USE_SEMCTL_SEMID_DS: |
2288 | * This symbol, if defined, indicates that struct semid_ds * is |
2289 | * used for semctl IPC_STAT. |
2290 | */ |
2291 | /*#define HAS_UNION_SEMUN / **/ |
2292 | /*#define USE_SEMCTL_SEMUN / **/ |
2293 | /*#define USE_SEMCTL_SEMID_DS / **/ |
2294 | |
758a5d79 |
2295 | /* HAS_UNORDERED: |
2296 | * This symbol, if defined, indicates that the unordered routine is |
2297 | * available to check whether two doubles are unordered |
2298 | * (effectively: whether either of them is NaN) |
2299 | */ |
2300 | /*#define HAS_UNORDERED / **/ |
2301 | |
a838cfe5 |
2302 | /* HAS_USTAT: |
2303 | * This symbol, if defined, indicates that the ustat system call is |
2304 | * available to query file system statistics by dev_t. |
2305 | */ |
2306 | /*#define HAS_USTAT / **/ |
2307 | |
2308 | /* HAS_VFORK: |
2309 | * This symbol, if defined, indicates that vfork() exists. |
2310 | */ |
2311 | /*#define HAS_VFORK / **/ |
2312 | |
2313 | /* Signal_t: |
2314 | * This symbol's value is either "void" or "int", corresponding to the |
2315 | * appropriate return type of a signal handler. Thus, you can declare |
2316 | * a signal handler using "Signal_t (*handler)()", and define the |
2317 | * handler using "Signal_t handler(sig)". |
3ebb1980 |
2318 | */ |
a838cfe5 |
2319 | #define Signal_t int /* Signal handler's return type */ |
e9a8643a |
2320 | |
a838cfe5 |
2321 | /* HAS_VPRINTF: |
2322 | * This symbol, if defined, indicates that the vprintf routine is available |
2323 | * to printf with a pointer to an argument list. If unavailable, you |
2324 | * may need to write your own, probably in terms of _doprnt(). |
3ebb1980 |
2325 | */ |
a838cfe5 |
2326 | /* USE_CHAR_VSPRINTF: |
2327 | * This symbol is defined if this system has vsprintf() returning type |
2328 | * (char*). The trend seems to be to declare it as "int vsprintf()". It |
2329 | * is up to the package author to declare vsprintf correctly based on the |
2330 | * symbol. |
2331 | */ |
2332 | #define HAS_VPRINTF /**/ |
2333 | /*#define USE_CHAR_VSPRINTF / **/ |
3ebb1980 |
2334 | |
4e0554ec |
2335 | /* HAS_WRITEV: |
2336 | * This symbol, if defined, indicates that the writev routine is |
2337 | * available to do scatter writes. |
2338 | */ |
2339 | /*#define HAS_WRITEV / **/ |
2340 | |
3ebb1980 |
2341 | /* USE_DYNAMIC_LOADING: |
2342 | * This symbol, if defined, indicates that dynamic loading of |
2343 | * some sort is available. |
2344 | */ |
2345 | /*#define USE_DYNAMIC_LOADING / **/ |
2346 | |
a838cfe5 |
2347 | /* DOUBLESIZE: |
2348 | * This symbol contains the size of a double, so that the C preprocessor |
2349 | * can make decisions based on it. |
2350 | */ |
2351 | #define DOUBLESIZE 8 /**/ |
2352 | |
2353 | /* EBCDIC: |
2354 | * This symbol, if defined, indicates that this system uses |
2355 | * EBCDIC encoding. |
2356 | */ |
2357 | /*#define EBCDIC / **/ |
2358 | |
3ebb1980 |
2359 | /* FFLUSH_NULL: |
2360 | * This symbol, if defined, tells that fflush(NULL) does flush |
2361 | * all pending stdio output. |
2362 | */ |
2363 | /* FFLUSH_ALL: |
2364 | * This symbol, if defined, tells that to flush |
2365 | * all pending stdio output one must loop through all |
2366 | * the stdio file handles stored in an array and fflush them. |
2367 | * Note that if fflushNULL is defined, fflushall will not |
2368 | * even be probed for and will be left undefined. |
2369 | */ |
2370 | /*#define FFLUSH_NULL / **/ |
2371 | /*#define FFLUSH_ALL / **/ |
2372 | |
a838cfe5 |
2373 | /* Fpos_t: |
2374 | * This symbol holds the type used to declare file positions in libc. |
2375 | * It can be fpos_t, long, uint, etc... It may be necessary to include |
2376 | * <sys/types.h> to get any typedef'ed information. |
2377 | */ |
2378 | #define Fpos_t int /* File position type */ |
2379 | |
2380 | /* Gid_t_f: |
2381 | * This symbol defines the format string used for printing a Gid_t. |
2382 | */ |
2383 | #define Gid_t_f "lu" /**/ |
2384 | |
2385 | /* Gid_t_sign: |
2386 | * This symbol holds the signedess of a Gid_t. |
2387 | * 1 for unsigned, -1 for signed. |
2388 | */ |
2389 | #define Gid_t_sign 1 /* GID sign */ |
2390 | |
2391 | /* Gid_t_size: |
2392 | * This symbol holds the size of a Gid_t in bytes. |
2393 | */ |
2394 | #define Gid_t_size 4 /* GID size */ |
2395 | |
2396 | /* Gid_t: |
2397 | * This symbol holds the return type of getgid() and the type of |
2398 | * argument to setrgid() and related functions. Typically, |
2399 | * it is the type of group ids in the kernel. It can be int, ushort, |
2400 | * gid_t, etc... It may be necessary to include <sys/types.h> to get |
2401 | * any typedef'ed information. |
2402 | */ |
2403 | #define Gid_t int /* Type for getgid(), etc... */ |
2404 | |
2405 | /* Groups_t: |
2406 | * This symbol holds the type used for the second argument to |
2407 | * getgroups() and setgroups(). Usually, this is the same as |
2408 | * gidtype (gid_t) , but sometimes it isn't. |
2409 | * It can be int, ushort, gid_t, etc... |
2410 | * It may be necessary to include <sys/types.h> to get any |
2411 | * typedef'ed information. This is only required if you have |
2412 | * getgroups() or setgroups().. |
2413 | */ |
2414 | #if defined(HAS_GETGROUPS) || defined(HAS_SETGROUPS) |
2415 | #define Groups_t int /* Type for 2nd arg to [sg]etgroups() */ |
2416 | #endif |
2417 | |
3ebb1980 |
2418 | /* DB_Prefix_t: |
2419 | * This symbol contains the type of the prefix structure element |
2420 | * in the <db.h> header file. In older versions of DB, it was |
2421 | * int, while in newer ones it is u_int32_t. |
2422 | */ |
2423 | /* DB_Hash_t: |
2424 | * This symbol contains the type of the prefix structure element |
2425 | * in the <db.h> header file. In older versions of DB, it was |
2426 | * int, while in newer ones it is size_t. |
2427 | */ |
640374d0 |
2428 | /* DB_VERSION_MAJOR_CFG: |
2429 | * This symbol, if defined, defines the major version number of |
2430 | * Berkeley DB found in the <db.h> header when Perl was configured. |
2431 | */ |
2432 | /* DB_VERSION_MINOR_CFG: |
2433 | * This symbol, if defined, defines the minor version number of |
2434 | * Berkeley DB found in the <db.h> header when Perl was configured. |
2435 | * For DB version 1 this is always 0. |
2436 | */ |
2437 | /* DB_VERSION_PATCH_CFG: |
2438 | * This symbol, if defined, defines the patch version number of |
2439 | * Berkeley DB found in the <db.h> header when Perl was configured. |
2440 | * For DB version 1 this is always 0. |
2441 | */ |
3ebb1980 |
2442 | #define DB_Hash_t u_int32_t /**/ |
2443 | #define DB_Prefix_t size_t /**/ |
640374d0 |
2444 | #define DB_VERSION_MAJOR_CFG /**/ |
2445 | #define DB_VERSION_MINOR_CFG /**/ |
2446 | #define DB_VERSION_PATCH_CFG /**/ |
3ebb1980 |
2447 | |
758a5d79 |
2448 | /* I_FP_CLASS: |
2449 | * This symbol, if defined, indicates that <fp_class.h> exists and |
2450 | * should be included. |
2451 | */ |
2452 | /*#define I_FP_CLASS / **/ |
2453 | |
a838cfe5 |
2454 | /* I_GRP: |
2455 | * This symbol, if defined, indicates to the C program that it should |
2456 | * include <grp.h>. |
2457 | */ |
2458 | /* GRPASSWD: |
2459 | * This symbol, if defined, indicates to the C program that struct group |
2460 | * in <grp.h> contains gr_passwd. |
2461 | */ |
2462 | /*#define I_GRP / **/ |
2463 | /*#define GRPASSWD / **/ |
2464 | |
3ebb1980 |
2465 | /* I_IEEEFP: |
2466 | * This symbol, if defined, indicates that <ieeefp.h> exists and |
2467 | * should be included. |
2468 | */ |
2469 | /*#define I_IEEEFP / **/ |
2470 | |
2471 | /* I_INTTYPES: |
2472 | * This symbol, if defined, indicates to the C program that it should |
2473 | * include <inttypes.h>. |
2474 | */ |
2475 | /*#define I_INTTYPES / **/ |
2476 | |
1b9c9cf5 |
2477 | /* I_LIBUTIL: |
2478 | * This symbol, if defined, indicates that <libutil.h> exists and |
2479 | * should be included. |
2480 | */ |
2481 | /*#define I_LIBUTIL / **/ |
2482 | |
a838cfe5 |
2483 | /* I_MACH_CTHREADS: |
2484 | * This symbol, if defined, indicates to the C program that it should |
2485 | * include <mach/cthreads.h>. |
2486 | */ |
2487 | /*#define I_MACH_CTHREADS / **/ |
2488 | |
3ebb1980 |
2489 | /* I_MNTENT: |
2490 | * This symbol, if defined, indicates that <mntent.h> exists and |
2491 | * should be included. |
2492 | */ |
2493 | /*#define I_MNTENT / **/ |
2494 | |
a838cfe5 |
2495 | /* I_NETDB: |
2496 | * This symbol, if defined, indicates that <netdb.h> exists and |
2497 | * should be included. |
2498 | */ |
2499 | /*#define I_NETDB / **/ |
2500 | |
3ebb1980 |
2501 | /* I_NETINET_TCP: |
2502 | * This symbol, if defined, indicates to the C program that it should |
2503 | * include <netinet/tcp.h>. |
2504 | */ |
2505 | /*#define I_NETINET_TCP / **/ |
2506 | |
2507 | /* I_POLL: |
2508 | * This symbol, if defined, indicates that <poll.h> exists and |
2509 | * should be included. |
2510 | */ |
2511 | /*#define I_POLL / **/ |
2512 | |
2513 | /* I_PROT: |
2514 | * This symbol, if defined, indicates that <prot.h> exists and |
2515 | * should be included. |
2516 | */ |
2517 | /*#define I_PROT / **/ |
2518 | |
a838cfe5 |
2519 | /* I_PTHREAD: |
2520 | * This symbol, if defined, indicates to the C program that it should |
2521 | * include <pthread.h>. |
2522 | */ |
2523 | /*#define I_PTHREAD / **/ |
2524 | |
2525 | /* I_PWD: |
2526 | * This symbol, if defined, indicates to the C program that it should |
2527 | * include <pwd.h>. |
2528 | */ |
2529 | /* PWQUOTA: |
2530 | * This symbol, if defined, indicates to the C program that struct passwd |
2531 | * contains pw_quota. |
2532 | */ |
2533 | /* PWAGE: |
2534 | * This symbol, if defined, indicates to the C program that struct passwd |
2535 | * contains pw_age. |
2536 | */ |
2537 | /* PWCHANGE: |
2538 | * This symbol, if defined, indicates to the C program that struct passwd |
2539 | * contains pw_change. |
2540 | */ |
2541 | /* PWCLASS: |
2542 | * This symbol, if defined, indicates to the C program that struct passwd |
2543 | * contains pw_class. |
2544 | */ |
2545 | /* PWEXPIRE: |
2546 | * This symbol, if defined, indicates to the C program that struct passwd |
2547 | * contains pw_expire. |
2548 | */ |
2549 | /* PWCOMMENT: |
2550 | * This symbol, if defined, indicates to the C program that struct passwd |
2551 | * contains pw_comment. |
2552 | */ |
2553 | /* PWGECOS: |
2554 | * This symbol, if defined, indicates to the C program that struct passwd |
2555 | * contains pw_gecos. |
2556 | */ |
2557 | /* PWPASSWD: |
2558 | * This symbol, if defined, indicates to the C program that struct passwd |
2559 | * contains pw_passwd. |
2560 | */ |
2561 | /*#define I_PWD / **/ |
2562 | /*#define PWQUOTA / **/ |
2563 | /*#define PWAGE / **/ |
2564 | /*#define PWCHANGE / **/ |
2565 | /*#define PWCLASS / **/ |
2566 | /*#define PWEXPIRE / **/ |
2567 | /*#define PWCOMMENT / **/ |
2568 | /*#define PWGECOS / **/ |
2569 | /*#define PWPASSWD / **/ |
2570 | |
3ebb1980 |
2571 | /* I_SHADOW: |
2572 | * This symbol, if defined, indicates that <shadow.h> exists and |
2573 | * should be included. |
2574 | */ |
2575 | /*#define I_SHADOW / **/ |
2576 | |
2577 | /* I_SOCKS: |
2578 | * This symbol, if defined, indicates that <socks.h> exists and |
2579 | * should be included. |
2580 | */ |
2581 | /*#define I_SOCKS / **/ |
2582 | |
2583 | /* I_SUNMATH: |
2584 | * This symbol, if defined, indicates that <sunmath.h> exists and |
2585 | * should be included. |
2586 | */ |
2587 | /*#define I_SUNMATH / **/ |
2588 | |
2589 | /* I_SYSLOG: |
2590 | * This symbol, if defined, indicates that <syslog.h> exists and |
2591 | * should be included. |
2592 | */ |
2593 | /*#define I_SYSLOG / **/ |
2594 | |
2595 | /* I_SYSMODE: |
2596 | * This symbol, if defined, indicates that <sys/mode.h> exists and |
2597 | * should be included. |
2598 | */ |
2599 | /*#define I_SYSMODE / **/ |
2600 | |
2601 | /* I_SYS_MOUNT: |
2602 | * This symbol, if defined, indicates that <sys/mount.h> exists and |
2603 | * should be included. |
2604 | */ |
2605 | /*#define I_SYS_MOUNT / **/ |
2606 | |
2607 | /* I_SYS_STATFS: |
2608 | * This symbol, if defined, indicates that <sys/statfs.h> exists. |
2609 | */ |
2610 | /*#define I_SYS_STATFS / **/ |
2611 | |
2612 | /* I_SYS_STATVFS: |
2613 | * This symbol, if defined, indicates that <sys/statvfs.h> exists and |
2614 | * should be included. |
2615 | */ |
2616 | /*#define I_SYS_STATVFS / **/ |
2617 | |
a838cfe5 |
2618 | /* I_SYSUIO: |
2619 | * This symbol, if defined, indicates that <sys/uio.h> exists and |
2620 | * should be included. |
2621 | */ |
2622 | /*#define I_SYSUIO / **/ |
2623 | |
3ebb1980 |
2624 | /* I_SYSUTSNAME: |
e9a8643a |
2625 | * This symbol, if defined, indicates that <sys/utsname.h> exists and |
2626 | * should be included. |
3ebb1980 |
2627 | */ |
a838cfe5 |
2628 | /*#define I_SYSUTSNAME / **/ |
2629 | |
2630 | /* I_SYS_VFS: |
2631 | * This symbol, if defined, indicates that <sys/vfs.h> exists and |
2632 | * should be included. |
2633 | */ |
2634 | /*#define I_SYS_VFS / **/ |
2635 | |
2636 | /* I_TIME: |
2637 | * This symbol, if defined, indicates to the C program that it should |
2638 | * include <time.h>. |
2639 | */ |
2640 | /* I_SYS_TIME: |
2641 | * This symbol, if defined, indicates to the C program that it should |
2642 | * include <sys/time.h>. |
2643 | */ |
2644 | /* I_SYS_TIME_KERNEL: |
2645 | * This symbol, if defined, indicates to the C program that it should |
2646 | * include <sys/time.h> with KERNEL defined. |
2647 | */ |
2648 | #define I_TIME /**/ |
2649 | /*#define I_SYS_TIME / **/ |
2650 | /*#define I_SYS_TIME_KERNEL / **/ |
2651 | |
2652 | /* I_USTAT: |
2653 | * This symbol, if defined, indicates that <ustat.h> exists and |
2654 | * should be included. |
2655 | */ |
2656 | /*#define I_USTAT / **/ |
2657 | |
2658 | /* PERL_INC_VERSION_LIST: |
2659 | * This variable specifies the list of subdirectories in over |
2660 | * which perl.c:incpush() and lib/lib.pm will automatically |
2661 | * search when adding directories to @INC, in a format suitable |
2662 | * for a C initialization string. See the inc_version_list entry |
2663 | * in Porting/Glossary for more details. |
2664 | */ |
2665 | #define PERL_INC_VERSION_LIST NULL /**/ |
2666 | |
2667 | /* INSTALL_USR_BIN_PERL: |
2668 | * This symbol, if defined, indicates that Perl is to be installed |
2669 | * also as /usr/bin/perl. |
2670 | */ |
2671 | /*#define INSTALL_USR_BIN_PERL / **/ |
2672 | |
2673 | /* PERL_PRIfldbl: |
2674 | * This symbol, if defined, contains the string used by stdio to |
2675 | * format long doubles (format 'f') for output. |
2676 | */ |
2677 | /* PERL_PRIgldbl: |
2678 | * This symbol, if defined, contains the string used by stdio to |
2679 | * format long doubles (format 'g') for output. |
2680 | */ |
2681 | /* PERL_PRIeldbl: |
2682 | * This symbol, if defined, contains the string used by stdio to |
2683 | * format long doubles (format 'e') for output. |
2684 | */ |
2685 | /* PERL_SCNfldbl: |
2686 | * This symbol, if defined, contains the string used by stdio to |
2687 | * format long doubles (format 'f') for input. |
2688 | */ |
2689 | /*#define PERL_PRIfldbl "llf" / **/ |
2690 | /*#define PERL_PRIgldbl "llg" / **/ |
2691 | /*#define PERL_PRIeldbl "lle" / **/ |
2692 | /*#define PERL_SCNfldbl "llf" / **/ |
2693 | |
2694 | /* Off_t: |
2695 | * This symbol holds the type used to declare offsets in the kernel. |
2696 | * It can be int, long, off_t, etc... It may be necessary to include |
2697 | * <sys/types.h> to get any typedef'ed information. |
2698 | */ |
2699 | /* LSEEKSIZE: |
2700 | * This symbol holds the number of bytes used by the Off_t. |
2701 | */ |
2702 | /* Off_t_size: |
2703 | * This symbol holds the number of bytes used by the Off_t. |
2704 | */ |
2705 | #define Off_t int /* <offset> type */ |
2706 | #define LSEEKSIZE 4 /* <offset> size */ |
2707 | #define Off_t_size 4 /* <offset> size */ |
2708 | |
2709 | /* Free_t: |
2710 | * This variable contains the return type of free(). It is usually |
2711 | * void, but occasionally int. |
2712 | */ |
2713 | /* Malloc_t: |
2714 | * This symbol is the type of pointer returned by malloc and realloc. |
2715 | */ |
2716 | #define Malloc_t void * /**/ |
2717 | #define Free_t int /**/ |
3ebb1980 |
2718 | |
a838cfe5 |
2719 | /* MYMALLOC: |
2720 | * This symbol, if defined, indicates that we're using our own malloc. |
3ebb1980 |
2721 | */ |
a838cfe5 |
2722 | /*#define MYMALLOC / **/ |
3ebb1980 |
2723 | |
a838cfe5 |
2724 | /* Mode_t: |
2725 | * This symbol holds the type used to declare file modes |
2726 | * for systems calls. It is usually mode_t, but may be |
2727 | * int or unsigned short. It may be necessary to include <sys/types.h> |
2728 | * to get any typedef'ed information. |
3ebb1980 |
2729 | */ |
a838cfe5 |
2730 | #define Mode_t int /* file mode parameter for system calls */ |
3ebb1980 |
2731 | |
a838cfe5 |
2732 | /* VAL_O_NONBLOCK: |
2733 | * This symbol is to be used during open() or fcntl(F_SETFL) to turn on |
2734 | * non-blocking I/O for the file descriptor. Note that there is no way |
2735 | * back, i.e. you cannot turn it blocking again this way. If you wish to |
2736 | * alternatively switch between blocking and non-blocking, use the |
2737 | * ioctl(FIOSNBIO) call instead, but that is not supported by all devices. |
3ebb1980 |
2738 | */ |
a838cfe5 |
2739 | /* VAL_EAGAIN: |
2740 | * This symbol holds the errno error code set by read() when no data was |
2741 | * present on the non-blocking file descriptor. |
3ebb1980 |
2742 | */ |
a838cfe5 |
2743 | /* RD_NODATA: |
2744 | * This symbol holds the return code from read() when no data is present |
2745 | * on the non-blocking file descriptor. Be careful! If EOF_NONBLOCK is |
2746 | * not defined, then you can't distinguish between no data and EOF by |
2747 | * issuing a read(). You'll have to find another way to tell for sure! |
3ebb1980 |
2748 | */ |
a838cfe5 |
2749 | /* EOF_NONBLOCK: |
2750 | * This symbol, if defined, indicates to the C program that a read() on |
2751 | * a non-blocking file descriptor will return 0 on EOF, and not the value |
2752 | * held in RD_NODATA (-1 usually, in that case!). |
3ebb1980 |
2753 | */ |
a838cfe5 |
2754 | #define VAL_O_NONBLOCK O_NONBLOCK |
2755 | #define VAL_EAGAIN EAGAIN |
2756 | #define RD_NODATA -1 |
2757 | #undef EOF_NONBLOCK |
3ebb1980 |
2758 | |
a7fea17f |
2759 | /* NEED_VA_COPY: |
2760 | * This symbol, if defined, indicates that the system stores |
2761 | * the variable argument list datatype, va_list, in a format |
2762 | * that cannot be copied by simple assignment, so that some |
2763 | * other means must be used when copying is required. |
2764 | * As such systems vary in their provision (or non-provision) |
2765 | * of copying mechanisms, handy.h defines a platform- |
2766 | * independent macro, Perl_va_copy(src, dst), to do the job. |
2767 | */ |
2768 | /*#define NEED_VA_COPY / **/ |
2769 | |
a838cfe5 |
2770 | /* Netdb_host_t: |
2771 | * This symbol holds the type used for the 1st argument |
2772 | * to gethostbyaddr(). |
2773 | */ |
2774 | /* Netdb_hlen_t: |
2775 | * This symbol holds the type used for the 2nd argument |
2776 | * to gethostbyaddr(). |
2777 | */ |
2778 | /* Netdb_name_t: |
2779 | * This symbol holds the type used for the argument to |
2780 | * gethostbyname(). |
2781 | */ |
2782 | /* Netdb_net_t: |
2783 | * This symbol holds the type used for the 1st argument to |
2784 | * getnetbyaddr(). |
2785 | */ |
2786 | #define Netdb_host_t const char * /**/ |
2787 | #define Netdb_hlen_t int /**/ |
2788 | #define Netdb_name_t const char * /**/ |
2789 | #define Netdb_net_t unsigned long /**/ |
2790 | |
2791 | /* PERL_OTHERLIBDIRS: |
2792 | * This variable contains a colon-separated set of paths for the perl |
2793 | * binary to search for additional library files or modules. |
2794 | * These directories will be tacked to the end of @INC. |
2795 | * Perl will automatically search below each path for version- |
2796 | * and architecture-specific directories. See PERL_INC_VERSION_LIST |
2797 | * for more details. |
2798 | */ |
2799 | /*#define PERL_OTHERLIBDIRS "" / **/ |
2800 | |
3ebb1980 |
2801 | /* IVTYPE: |
2802 | * This symbol defines the C type used for Perl's IV. |
2803 | */ |
2804 | /* UVTYPE: |
2805 | * This symbol defines the C type used for Perl's UV. |
2806 | */ |
2807 | /* I8TYPE: |
2808 | * This symbol defines the C type used for Perl's I8. |
2809 | */ |
2810 | /* U8TYPE: |
2811 | * This symbol defines the C type used for Perl's U8. |
2812 | */ |
2813 | /* I16TYPE: |
2814 | * This symbol defines the C type used for Perl's I16. |
2815 | */ |
2816 | /* U16TYPE: |
2817 | * This symbol defines the C type used for Perl's U16. |
2818 | */ |
2819 | /* I32TYPE: |
2820 | * This symbol defines the C type used for Perl's I32. |
2821 | */ |
2822 | /* U32TYPE: |
2823 | * This symbol defines the C type used for Perl's U32. |
2824 | */ |
2825 | /* I64TYPE: |
2826 | * This symbol defines the C type used for Perl's I64. |
2827 | */ |
2828 | /* U64TYPE: |
2829 | * This symbol defines the C type used for Perl's U64. |
2830 | */ |
2831 | /* NVTYPE: |
2832 | * This symbol defines the C type used for Perl's NV. |
2833 | */ |
2834 | /* IVSIZE: |
2835 | * This symbol contains the sizeof(IV). |
2836 | */ |
2837 | /* UVSIZE: |
2838 | * This symbol contains the sizeof(UV). |
2839 | */ |
2840 | /* I8SIZE: |
2841 | * This symbol contains the sizeof(I8). |
2842 | */ |
2843 | /* U8SIZE: |
2844 | * This symbol contains the sizeof(U8). |
2845 | */ |
2846 | /* I16SIZE: |
2847 | * This symbol contains the sizeof(I16). |
2848 | */ |
2849 | /* U16SIZE: |
2850 | * This symbol contains the sizeof(U16). |
2851 | */ |
2852 | /* I32SIZE: |
2853 | * This symbol contains the sizeof(I32). |
2854 | */ |
2855 | /* U32SIZE: |
2856 | * This symbol contains the sizeof(U32). |
2857 | */ |
2858 | /* I64SIZE: |
2859 | * This symbol contains the sizeof(I64). |
2860 | */ |
2861 | /* U64SIZE: |
2862 | * This symbol contains the sizeof(U64). |
2863 | */ |
2864 | /* NVSIZE: |
2865 | * This symbol contains the sizeof(NV). |
2866 | */ |
2867 | /* NV_PRESERVES_UV: |
2868 | * This symbol, if defined, indicates that a variable of type NVTYPE |
2869 | * can preserve all the bits of a variable of type UVTYPE. |
2870 | */ |
2871 | /* NV_PRESERVES_UV_BITS: |
2872 | * This symbol contains the number of bits a variable of type NVTYPE |
2873 | * can preserve of a variable of type UVTYPE. |
2874 | */ |
2875 | #define IVTYPE long /**/ |
2876 | #define UVTYPE unsigned long /**/ |
2877 | #define I8TYPE char /**/ |
2878 | #define U8TYPE unsigned char /**/ |
2879 | #define I16TYPE short /**/ |
2880 | #define U16TYPE unsigned short /**/ |
2881 | #define I32TYPE long /**/ |
2882 | #define U32TYPE unsigned long /**/ |
2883 | #ifdef HAS_QUAD |
2884 | #define I64TYPE int64_t /**/ |
2885 | #define U64TYPE uint64_t /**/ |
2886 | #endif |
2887 | #define NVTYPE double /**/ |
2888 | #define IVSIZE 4 /**/ |
2889 | #define UVSIZE 4 /**/ |
2890 | #define I8SIZE 1 /**/ |
2891 | #define U8SIZE 1 /**/ |
2892 | #define I16SIZE 2 /**/ |
2893 | #define U16SIZE 2 /**/ |
2894 | #define I32SIZE 4 /**/ |
2895 | #define U32SIZE 4 /**/ |
2896 | #ifdef HAS_QUAD |
2897 | #define I64SIZE 8 /**/ |
2898 | #define U64SIZE 8 /**/ |
2899 | #endif |
2900 | #define NVSIZE 8 /**/ |
2901 | #undef NV_PRESERVES_UV |
3096c11e |
2902 | #define NV_PRESERVES_UV_BITS 0 |
3ebb1980 |
2903 | |
2904 | /* IVdf: |
2905 | * This symbol defines the format string used for printing a Perl IV |
2906 | * as a signed decimal integer. |
2907 | */ |
2908 | /* UVuf: |
2909 | * This symbol defines the format string used for printing a Perl UV |
2910 | * as an unsigned decimal integer. |
2911 | */ |
2912 | /* UVof: |
2913 | * This symbol defines the format string used for printing a Perl UV |
2914 | * as an unsigned octal integer. |
2915 | */ |
2916 | /* UVxf: |
2917 | * This symbol defines the format string used for printing a Perl UV |
fd47df60 |
2918 | * as an unsigned hexadecimal integer in lowercase abcdef. |
2919 | */ |
159fae86 |
2920 | /* UVXf: |
2921 | * This symbol defines the format string used for printing a Perl UV |
2922 | * as an unsigned hexadecimal integer in uppercase ABCDEF. |
2923 | */ |
fd47df60 |
2924 | /* NVef: |
2925 | * This symbol defines the format string used for printing a Perl NV |
2926 | * using %e-ish floating point format. |
2927 | */ |
2928 | /* NVff: |
2929 | * This symbol defines the format string used for printing a Perl NV |
e9a8643a |
2930 | * using %f-ish floating point format. |
3ebb1980 |
2931 | */ |
e9a8643a |
2932 | /* NVgf: |
2933 | * This symbol defines the format string used for printing a Perl NV |
2934 | * using %g-ish floating point format. |
3ebb1980 |
2935 | */ |
e9a8643a |
2936 | #define IVdf "ld" /**/ |
2937 | #define UVuf "lu" /**/ |
2938 | #define UVof "lo" /**/ |
2939 | #define UVxf "lx" /**/ |
2940 | #define UVXf "lX" /**/ |
2941 | #define NVef "e" /**/ |
2942 | #define NVff "f" /**/ |
2943 | #define NVgf "g" /**/ |
3ebb1980 |
2944 | |
a838cfe5 |
2945 | /* Pid_t: |
2946 | * This symbol holds the type used to declare process ids in the kernel. |
2947 | * It can be int, uint, pid_t, etc... It may be necessary to include |
2948 | * <sys/types.h> to get any typedef'ed information. |
2949 | */ |
2950 | #define Pid_t int /* PID type */ |
2951 | |
2952 | /* PRIVLIB: |
2953 | * This symbol contains the name of the private library for this package. |
2954 | * The library is private in the sense that it needn't be in anyone's |
2955 | * execution path, but it should be accessible by the world. The program |
2956 | * should be prepared to do ~ expansion. |
2957 | */ |
2958 | /* PRIVLIB_EXP: |
2959 | * This symbol contains the ~name expanded version of PRIVLIB, to be used |
2960 | * in programs that are not prepared to deal with ~ expansion at run-time. |
2961 | */ |
2962 | #define PRIVLIB "/usr/local/lib/perl5/5.7" /**/ |
2963 | #define PRIVLIB_EXP "/usr/local/lib/perl5/5.7" /**/ |
2964 | |
2965 | /* PTRSIZE: |
2966 | * This symbol contains the size of a pointer, so that the C preprocessor |
2967 | * can make decisions based on it. It will be sizeof(void *) if |
2968 | * the compiler supports (void *); otherwise it will be |
2969 | * sizeof(char *). |
2970 | */ |
2971 | #define PTRSIZE 4 /**/ |
2972 | |
2973 | /* Drand01: |
2974 | * This macro is to be used to generate uniformly distributed |
2975 | * random numbers over the range [0., 1.[. You may have to supply |
2976 | * an 'extern double drand48();' in your program since SunOS 4.1.3 |
2977 | * doesn't provide you with anything relevant in its headers. |
2978 | * See HAS_DRAND48_PROTO. |
2979 | */ |
2980 | /* Rand_seed_t: |
2981 | * This symbol defines the type of the argument of the |
2982 | * random seed function. |
2983 | */ |
2984 | /* seedDrand01: |
2985 | * This symbol defines the macro to be used in seeding the |
2986 | * random number generator (see Drand01). |
2987 | */ |
2988 | /* RANDBITS: |
2989 | * This symbol indicates how many bits are produced by the |
2990 | * function used to generate normalized random numbers. |
2991 | * Values include 15, 16, 31, and 48. |
2992 | */ |
2993 | #define Drand01() ((rand() & 0x7FFF) / (double) ((unsigned long)1 << 15)) /**/ |
2994 | #define Rand_seed_t int /**/ |
2995 | #define seedDrand01(x) srand((Rand_seed_t)x) /**/ |
2996 | #define RANDBITS 48 /**/ |
2997 | |
2998 | /* SELECT_MIN_BITS: |
2999 | * This symbol holds the minimum number of bits operated by select. |
3000 | * That is, if you do select(n, ...), how many bits at least will be |
3001 | * cleared in the masks if some activity is detected. Usually this |
3002 | * is either n or 32*ceil(n/32), especially many little-endians do |
3003 | * the latter. This is only useful if you have select(), naturally. |
3004 | */ |
3005 | #define SELECT_MIN_BITS 32 /**/ |
3006 | |
3007 | /* Select_fd_set_t: |
3008 | * This symbol holds the type used for the 2nd, 3rd, and 4th |
3009 | * arguments to select. Usually, this is 'fd_set *', if HAS_FD_SET |
3010 | * is defined, and 'int *' otherwise. This is only useful if you |
3011 | * have select(), of course. |
3012 | */ |
3013 | #define Select_fd_set_t int /**/ |
3014 | |
3015 | /* SIG_NAME: |
3016 | * This symbol contains a list of signal names in order of |
3017 | * signal number. This is intended |
3018 | * to be used as a static array initialization, like this: |
3019 | * char *sig_name[] = { SIG_NAME }; |
3020 | * The signals in the list are separated with commas, and each signal |
3021 | * is surrounded by double quotes. There is no leading SIG in the signal |
3022 | * name, i.e. SIGQUIT is known as "QUIT". |
3023 | * Gaps in the signal numbers (up to NSIG) are filled in with NUMnn, |
3024 | * etc., where nn is the actual signal number (e.g. NUM37). |
3025 | * The signal number for sig_name[i] is stored in sig_num[i]. |
3026 | * The last element is 0 to terminate the list with a NULL. This |
3027 | * corresponds to the 0 at the end of the sig_num list. |
3028 | */ |
3029 | /* SIG_NUM: |
3030 | * This symbol contains a list of signal numbers, in the same order as the |
3031 | * SIG_NAME list. It is suitable for static array initialization, as in: |
3032 | * int sig_num[] = { SIG_NUM }; |
3033 | * The signals in the list are separated with commas, and the indices |
3034 | * within that list and the SIG_NAME list match, so it's easy to compute |
3035 | * the signal name from a number or vice versa at the price of a small |
3036 | * dynamic linear lookup. |
3037 | * Duplicates are allowed, but are moved to the end of the list. |
3038 | * The signal number corresponding to sig_name[i] is sig_number[i]. |
3039 | * if (i < NSIG) then sig_number[i] == i. |
3040 | * The last element is 0, corresponding to the 0 at the end of |
3041 | * the sig_name list. |
3042 | */ |
3043 | /* SIG_SIZE: |
3044 | * This variable contains the number of elements of the sig_name |
3045 | * and sig_num arrays, excluding the final NULL entry. |
3046 | */ |
3047 | #define SIG_NAME 0 /**/ |
3048 | #define SIG_NUM 0 /**/ |
3049 | #define SIG_SIZE 1 /**/ |
3050 | |
3051 | /* SITEARCH: |
3052 | * This symbol contains the name of the private library for this package. |
3053 | * The library is private in the sense that it needn't be in anyone's |
3054 | * execution path, but it should be accessible by the world. The program |
3055 | * should be prepared to do ~ expansion. |
3056 | * The standard distribution will put nothing in this directory. |
3057 | * After perl has been installed, users may install their own local |
3058 | * architecture-dependent modules in this directory with |
3059 | * MakeMaker Makefile.PL |
3060 | * or equivalent. See INSTALL for details. |
3061 | */ |
3062 | /* SITEARCH_EXP: |
3063 | * This symbol contains the ~name expanded version of SITEARCH, to be used |
3064 | * in programs that are not prepared to deal with ~ expansion at run-time. |
3065 | */ |
3066 | #define SITEARCH "" /**/ |
3067 | #define SITEARCH_EXP "" /**/ |
3068 | |
3069 | /* SITELIB: |
3070 | * This symbol contains the name of the private library for this package. |
3071 | * The library is private in the sense that it needn't be in anyone's |
3072 | * execution path, but it should be accessible by the world. The program |
3073 | * should be prepared to do ~ expansion. |
3074 | * The standard distribution will put nothing in this directory. |
3075 | * After perl has been installed, users may install their own local |
3076 | * architecture-independent modules in this directory with |
3077 | * MakeMaker Makefile.PL |
3078 | * or equivalent. See INSTALL for details. |
3079 | */ |
3080 | /* SITELIB_EXP: |
3081 | * This symbol contains the ~name expanded version of SITELIB, to be used |
3082 | * in programs that are not prepared to deal with ~ expansion at run-time. |
3083 | */ |
3084 | /* SITELIB_STEM: |
3085 | * This define is SITELIB_EXP with any trailing version-specific component |
3086 | * removed. The elements in inc_version_list (inc_version_list.U) can |
3087 | * be tacked onto this variable to generate a list of directories to search. |
3088 | */ |
3089 | #define SITELIB "" /**/ |
3090 | #define SITELIB_EXP "" /**/ |
3091 | #define SITELIB_STEM "" /**/ |
3092 | |
3093 | /* Size_t_size: |
3094 | * This symbol holds the size of a Size_t in bytes. |
3095 | */ |
3096 | #define Size_t_size 4 /* */ |
3097 | |
3098 | /* Size_t: |
3099 | * This symbol holds the type used to declare length parameters |
3100 | * for string functions. It is usually size_t, but may be |
3101 | * unsigned long, int, etc. It may be necessary to include |
3102 | * <sys/types.h> to get any typedef'ed information. |
3103 | */ |
3104 | #define Size_t int /* length paramater for string functions */ |
3105 | |
3106 | /* Sock_size_t: |
3107 | * This symbol holds the type used for the size argument of |
3108 | * various socket calls (just the base type, not the pointer-to). |
3ebb1980 |
3109 | */ |
a838cfe5 |
3110 | #define Sock_size_t int /**/ |
3ebb1980 |
3111 | |
a838cfe5 |
3112 | /* SSize_t: |
3113 | * This symbol holds the type used by functions that return |
3114 | * a count of bytes or an error condition. It must be a signed type. |
3115 | * It is usually ssize_t, but may be long or int, etc. |
3116 | * It may be necessary to include <sys/types.h> or <unistd.h> |
3117 | * to get any typedef'ed information. |
3118 | * We will pick a type such that sizeof(SSize_t) == sizeof(Size_t). |
3ebb1980 |
3119 | */ |
a838cfe5 |
3120 | #define SSize_t int /* signed count of bytes */ |
3ebb1980 |
3121 | |
3122 | /* STARTPERL: |
3123 | * This variable contains the string to put in front of a perl |
3124 | * script to make sure (one hopes) that it runs with perl and not |
3125 | * some shell. |
3126 | */ |
3127 | #define STARTPERL "" /**/ |
3128 | |
a838cfe5 |
3129 | /* STDCHAR: |
3130 | * This symbol is defined to be the type of char used in stdio.h. |
3131 | * It has the values "unsigned char" or "char". |
3132 | */ |
3133 | #define STDCHAR char /**/ |
3134 | |
3ebb1980 |
3135 | /* HAS_STDIO_STREAM_ARRAY: |
3136 | * This symbol, if defined, tells that there is an array |
3137 | * holding the stdio streams. |
3138 | */ |
3139 | /* STDIO_STREAM_ARRAY: |
3140 | * This symbol tells the name of the array holding the stdio streams. |
3141 | * Usual values include _iob, __iob, and __sF. |
3142 | */ |
3143 | /*#define HAS_STDIO_STREAM_ARRAY / **/ |
3144 | #define STDIO_STREAM_ARRAY |
3145 | |
a838cfe5 |
3146 | /* Uid_t_f: |
3147 | * This symbol defines the format string used for printing a Uid_t. |
3148 | */ |
3149 | #define Uid_t_f "lu" /**/ |
3150 | |
3151 | /* Uid_t_sign: |
3152 | * This symbol holds the signedess of a Uid_t. |
3153 | * 1 for unsigned, -1 for signed. |
3154 | */ |
3155 | #define Uid_t_sign 1 /* UID sign */ |
3156 | |
3157 | /* Uid_t_size: |
3158 | * This symbol holds the size of a Uid_t in bytes. |
3159 | */ |
3160 | #define Uid_t_size 4 /* UID size */ |
3161 | |
3162 | /* Uid_t: |
3163 | * This symbol holds the type used to declare user ids in the kernel. |
3164 | * It can be int, ushort, uid_t, etc... It may be necessary to include |
3165 | * <sys/types.h> to get any typedef'ed information. |
3166 | */ |
3167 | #define Uid_t int /* UID type */ |
3168 | |
3ebb1980 |
3169 | /* USE_64_BIT_INT: |
3170 | * This symbol, if defined, indicates that 64-bit integers should |
3171 | * be used when available. If not defined, the native integers |
3172 | * will be employed (be they 32 or 64 bits). The minimal possible |
3173 | * 64-bitness is used, just enough to get 64-bit integers into Perl. |
3174 | * This may mean using for example "long longs", while your memory |
3175 | * may still be limited to 2 gigabytes. |
3176 | */ |
3177 | /* USE_64_BIT_ALL: |
3178 | * This symbol, if defined, indicates that 64-bit integers should |
3179 | * be used when available. If not defined, the native integers |
3180 | * will be used (be they 32 or 64 bits). The maximal possible |
3181 | * 64-bitness is employed: LP64 or ILP64, meaning that you will |
3182 | * be able to use more than 2 gigabytes of memory. This mode is |
3183 | * even more binary incompatible than USE_64_BIT_INT. You may not |
3184 | * be able to run the resulting executable in a 32-bit CPU at all or |
3185 | * you may need at least to reboot your OS to 64-bit mode. |
3186 | */ |
3187 | #ifndef USE_64_BIT_INT |
3188 | /*#define USE_64_BIT_INT / **/ |
3189 | #endif |
3190 | |
3191 | #ifndef USE_64_BIT_ALL |
3192 | /*#define USE_64_BIT_ALL / **/ |
3193 | #endif |
3194 | |
3195 | /* USE_LARGE_FILES: |
3196 | * This symbol, if defined, indicates that large file support |
3197 | * should be used when available. |
3198 | */ |
3199 | #ifndef USE_LARGE_FILES |
3200 | /*#define USE_LARGE_FILES / **/ |
3201 | #endif |
3202 | |
3203 | /* USE_LONG_DOUBLE: |
3204 | * This symbol, if defined, indicates that long doubles should |
3205 | * be used when available. |
3206 | */ |
3207 | #ifndef USE_LONG_DOUBLE |
3208 | /*#define USE_LONG_DOUBLE / **/ |
3209 | #endif |
3210 | |
3211 | /* USE_MORE_BITS: |
3212 | * This symbol, if defined, indicates that 64-bit interfaces and |
3213 | * long doubles should be used when available. |
3214 | */ |
3215 | #ifndef USE_MORE_BITS |
3216 | /*#define USE_MORE_BITS / **/ |
3217 | #endif |
3218 | |
3219 | /* MULTIPLICITY: |
3220 | * This symbol, if defined, indicates that Perl should |
3221 | * be built to use multiplicity. |
3222 | */ |
3223 | #ifndef MULTIPLICITY |
3224 | /*#define MULTIPLICITY / **/ |
3225 | #endif |
3226 | |
3227 | /* USE_PERLIO: |
3228 | * This symbol, if defined, indicates that the PerlIO abstraction should |
3229 | * be used throughout. If not defined, stdio should be |
3230 | * used in a fully backward compatible manner. |
3231 | */ |
3232 | #ifndef USE_PERLIO |
3233 | /*#define USE_PERLIO / **/ |
3234 | #endif |
3235 | |
3236 | /* USE_SOCKS: |
3237 | * This symbol, if defined, indicates that Perl should |
3238 | * be built to use socks. |
3239 | */ |
3240 | #ifndef USE_SOCKS |
3241 | /*#define USE_SOCKS / **/ |
3242 | #endif |
3243 | |
a838cfe5 |
3244 | /* USE_ITHREADS: |
3245 | * This symbol, if defined, indicates that Perl should be built to |
3246 | * use the interpreter-based threading implementation. |
3247 | */ |
3248 | /* USE_5005THREADS: |
3249 | * This symbol, if defined, indicates that Perl should be built to |
3250 | * use the 5.005-based threading implementation. |
3251 | */ |
3252 | /* OLD_PTHREADS_API: |
3253 | * This symbol, if defined, indicates that Perl should |
3254 | * be built to use the old draft POSIX threads API. |
3255 | */ |
3256 | /* USE_REENTRANT_API: |
3257 | * This symbol, if defined, indicates that Perl should |
3258 | * try to use the various _r versions of library functions. |
3259 | * This is extremely experimental. |
3260 | */ |
3261 | /*#define USE_5005THREADS / **/ |
3262 | /*#define USE_ITHREADS / **/ |
3263 | #if defined(USE_5005THREADS) && !defined(USE_ITHREADS) |
3264 | #define USE_THREADS /* until src is revised*/ |
3265 | #endif |
3266 | /*#define OLD_PTHREADS_API / **/ |
3267 | /*#define USE_REENTRANT_API / **/ |
3268 | |
3269 | /* PERL_VENDORARCH: |
3270 | * If defined, this symbol contains the name of a private library. |
3271 | * The library is private in the sense that it needn't be in anyone's |
3272 | * execution path, but it should be accessible by the world. |
3273 | * It may have a ~ on the front. |
3274 | * The standard distribution will put nothing in this directory. |
3275 | * Vendors who distribute perl may wish to place their own |
3276 | * architecture-dependent modules and extensions in this directory with |
3277 | * MakeMaker Makefile.PL INSTALLDIRS=vendor |
3278 | * or equivalent. See INSTALL for details. |
3279 | */ |
3280 | /* PERL_VENDORARCH_EXP: |
3281 | * This symbol contains the ~name expanded version of PERL_VENDORARCH, to be used |
3282 | * in programs that are not prepared to deal with ~ expansion at run-time. |
3283 | */ |
3284 | /*#define PERL_VENDORARCH "" / **/ |
3285 | /*#define PERL_VENDORARCH_EXP "" / **/ |
3286 | |
3287 | /* PERL_VENDORLIB_EXP: |
3288 | * This symbol contains the ~name expanded version of VENDORLIB, to be used |
3289 | * in programs that are not prepared to deal with ~ expansion at run-time. |
3290 | */ |
3291 | /* PERL_VENDORLIB_STEM: |
3292 | * This define is PERL_VENDORLIB_EXP with any trailing version-specific component |
3293 | * removed. The elements in inc_version_list (inc_version_list.U) can |
3294 | * be tacked onto this variable to generate a list of directories to search. |
3295 | */ |
3296 | /*#define PERL_VENDORLIB_EXP "" / **/ |
3297 | /*#define PERL_VENDORLIB_STEM "" / **/ |
3298 | |
3299 | /* VOIDFLAGS: |
3300 | * This symbol indicates how much support of the void type is given by this |
3301 | * compiler. What various bits mean: |
3302 | * |
3303 | * 1 = supports declaration of void |
3304 | * 2 = supports arrays of pointers to functions returning void |
3305 | * 4 = supports comparisons between pointers to void functions and |
3306 | * addresses of void functions |
3307 | * 8 = suports declaration of generic void pointers |
3308 | * |
3309 | * The package designer should define VOIDUSED to indicate the requirements |
3310 | * of the package. This can be done either by #defining VOIDUSED before |
3311 | * including config.h, or by defining defvoidused in Myinit.U. If the |
3312 | * latter approach is taken, only those flags will be tested. If the |
3313 | * level of void support necessary is not present, defines void to int. |
3314 | */ |
3315 | #ifndef VOIDUSED |
3316 | #define VOIDUSED 1 |
3317 | #endif |
3318 | #define VOIDFLAGS 1 |
3319 | #if (VOIDFLAGS & VOIDUSED) != VOIDUSED |
3320 | #define void int /* is void to be avoided? */ |
3321 | #define M_VOID /* Xenix strikes again */ |
3322 | #endif |
3323 | |
3ebb1980 |
3324 | /* PERL_XS_APIVERSION: |
3325 | * This variable contains the version of the oldest perl binary |
3326 | * compatible with the present perl. perl.c:incpush() and |
3327 | * lib/lib.pm will automatically search in for older |
3328 | * directories across major versions back to xs_apiversion. |
3329 | * This is only useful if you have a perl library directory tree |
3330 | * structured like the default one. |
3331 | * See INSTALL for how this works. |
3332 | * The versioned site_perl directory was introduced in 5.005, |
3333 | * so that is the lowest possible value. |
3334 | * Since this can depend on compile time options (such as |
3335 | * bincompat) it is set by Configure. Other non-default sources |
3336 | * of potential incompatibility, such as multiplicity, threads, |
3337 | * debugging, 64bits, sfio, etc., are not checked for currently, |
3338 | * though in principle we could go snooping around in old |
3339 | * Config.pm files. |
3340 | */ |
3341 | /* PERL_PM_APIVERSION: |
3342 | * This variable contains the version of the oldest perl |
3343 | * compatible with the present perl. (That is, pure perl modules |
3344 | * written for pm_apiversion will still work for the current |
3345 | * version). perl.c:incpush() and lib/lib.pm will automatically |
3346 | * search in for older directories across major versions |
3347 | * back to pm_apiversion. This is only useful if you have a perl |
3348 | * library directory tree structured like the default one. The |
3349 | * versioned site_perl library was introduced in 5.005, so that's |
3350 | * the default setting for this variable. It's hard to imagine |
3351 | * it changing before Perl6. It is included here for symmetry |
a838cfe5 |
3352 | * with xs_apiveprsion -- the searching algorithms will |
3353 | * (presumably) be similar. |
3354 | * See the INSTALL file for how this works. |
e9a8643a |
3355 | */ |
a838cfe5 |
3356 | #define PERL_XS_APIVERSION "5.005" |
3357 | #define PERL_PM_APIVERSION "5.005" |
5440bc8e |
3358 | |
8b4ac5a4 |
3359 | /* HAS_CRYPT: |
3360 | * This symbol, if defined, indicates that the crypt routine is available |
3361 | * to encrypt passwords and the like. |
3362 | */ |
3363 | /*#define HAS_CRYPT / **/ |
3364 | |
a838cfe5 |
3365 | /* SETUID_SCRIPTS_ARE_SECURE_NOW: |
3366 | * This symbol, if defined, indicates that the bug that prevents |
3367 | * setuid scripts from being secure is not present in this kernel. |
b99a9337 |
3368 | */ |
a838cfe5 |
3369 | /* DOSUID: |
3370 | * This symbol, if defined, indicates that the C program should |
3371 | * check the script that it is executing for setuid/setgid bits, and |
3372 | * attempt to emulate setuid/setgid on systems that have disabled |
3373 | * setuid #! scripts because the kernel can't do it securely. |
3374 | * It is up to the package designer to make sure that this emulation |
3375 | * is done securely. Among other things, it should do an fstat on |
3376 | * the script it just opened to make sure it really is a setuid/setgid |
3377 | * script, it should make sure the arguments passed correspond exactly |
3378 | * to the argument on the #! line, and it should not trust any |
3379 | * subprocesses to which it must pass the filename rather than the |
3380 | * file descriptor of the script to be executed. |
5440bc8e |
3381 | */ |
a838cfe5 |
3382 | /*#define SETUID_SCRIPTS_ARE_SECURE_NOW / **/ |
3383 | /*#define DOSUID / **/ |
e9a8643a |
3384 | |
c68a00c0 |
3385 | /* Shmat_t: |
3386 | * This symbol holds the return type of the shmat() system call. |
3387 | * Usually set to 'void *' or 'char *'. |
3388 | */ |
3389 | /* HAS_SHMAT_PROTOTYPE: |
3390 | * This symbol, if defined, indicates that the sys/shm.h includes |
3391 | * a prototype for shmat(). Otherwise, it is up to the program to |
3392 | * guess one. Shmat_t shmat(int, Shmat_t, int) is a good guess, |
3393 | * but not always right so it should be emitted by the program only |
3394 | * when HAS_SHMAT_PROTOTYPE is not defined to avoid conflicting defs. |
3395 | */ |
3396 | #define Shmat_t void * /**/ |
3397 | /*#define HAS_SHMAT_PROTOTYPE / **/ |
3398 | |
3399 | /* I_NDBM: |
3400 | * This symbol, if defined, indicates that <ndbm.h> exists and should |
3401 | * be included. |
3402 | */ |
3403 | /*#define I_NDBM / **/ |
3404 | |
a838cfe5 |
3405 | /* I_STDARG: |
3406 | * This symbol, if defined, indicates that <stdarg.h> exists and should |
3407 | * be included. |
5440bc8e |
3408 | */ |
a838cfe5 |
3409 | /* I_VARARGS: |
3410 | * This symbol, if defined, indicates to the C program that it should |
3411 | * include <varargs.h>. |
e9a8643a |
3412 | */ |
a838cfe5 |
3413 | #define I_STDARG /**/ |
3414 | /*#define I_VARARGS / **/ |
3415 | |
c68a00c0 |
3416 | /* CAN_PROTOTYPE: |
3417 | * If defined, this macro indicates that the C compiler can handle |
3418 | * function prototypes. |
3419 | */ |
a3c02183 |
3420 | /* _: |
c68a00c0 |
3421 | * This macro is used to declare function parameters for folks who want |
3422 | * to make declarations with prototypes using a different style than |
3423 | * the above macros. Use double parentheses. For example: |
3424 | * |
a3c02183 |
3425 | * int main _((int argc, char *argv[])); |
c68a00c0 |
3426 | */ |
3427 | /*#define CAN_PROTOTYPE / **/ |
3428 | #ifdef CAN_PROTOTYPE |
a3c02183 |
3429 | #define _(args) args |
c68a00c0 |
3430 | #else |
a3c02183 |
3431 | #define _(args) () |
c68a00c0 |
3432 | #endif |
3433 | |
a838cfe5 |
3434 | /* SH_PATH: |
3435 | * This symbol contains the full pathname to the shell used on this |
3436 | * on this system to execute Bourne shell scripts. Usually, this will be |
3437 | * /bin/sh, though it's possible that some systems will have /bin/ksh, |
3438 | * /bin/pdksh, /bin/ash, /bin/bash, or even something such as |
3439 | * D:/bin/sh.exe. |
e9a8643a |
3440 | */ |
a838cfe5 |
3441 | #define SH_PATH "" /**/ |
3442 | |
3443 | /* USE_CROSS_COMPILE: |
3444 | * This symbol, if defined, indicates that Perl is being cross-compiled. |
e9a8643a |
3445 | */ |
a838cfe5 |
3446 | /* PERL_TARGETARCH: |
3447 | * This symbol, if defined, indicates the target architecture |
3448 | * Perl has been cross-compiled to. Undefined if not a cross-compile. |
3449 | */ |
3450 | #ifndef USE_CROSS_COMPILE |
3451 | /*#define USE_CROSS_COMPILE / **/ |
3452 | #define PERL_TARGETARCH "" /**/ |
5440bc8e |
3453 | #endif |
3454 | |
a838cfe5 |
3455 | /* HAS_DBMINIT_PROTO: |
3456 | * This symbol, if defined, indicates that the system provides |
3457 | * a prototype for the dbminit() function. Otherwise, it is up |
3458 | * to the program to supply one. A good guess is |
3459 | * extern int dbminit(char *); |
2ef53570 |
3460 | */ |
a838cfe5 |
3461 | /*#define HAS_DBMINIT_PROTO / **/ |
2ef53570 |
3462 | |
a838cfe5 |
3463 | /* HAS_DIRFD: |
3464 | * This manifest constant lets the C program know that dirfd |
3465 | * is available. |
2ef53570 |
3466 | */ |
a838cfe5 |
3467 | /*#define HAS_DIRFD / **/ |
2ef53570 |
3468 | |
a838cfe5 |
3469 | /* HAS_FLOCK_PROTO: |
3470 | * This symbol, if defined, indicates that the system provides |
3471 | * a prototype for the flock() function. Otherwise, it is up |
3472 | * to the program to supply one. A good guess is |
3473 | * extern int flock(int, int); |
b99a9337 |
3474 | */ |
a838cfe5 |
3475 | /*#define HAS_FLOCK_PROTO / **/ |
b99a9337 |
3476 | |
a838cfe5 |
3477 | /* HAS_FPCLASSL: |
3478 | * This symbol, if defined, indicates that the fpclassl routine is |
3479 | * available to classify long doubles. Available for example in IRIX. |
3480 | * The returned values are defined in <ieeefp.h> and are: |
3481 | * |
3482 | * FP_SNAN signaling NaN |
3483 | * FP_QNAN quiet NaN |
3484 | * FP_NINF negative infinity |
3485 | * FP_PINF positive infinity |
3486 | * FP_NDENORM negative denormalized non-zero |
3487 | * FP_PDENORM positive denormalized non-zero |
3488 | * FP_NZERO negative zero |
3489 | * FP_PZERO positive zero |
3490 | * FP_NNORM negative normalized non-zero |
3491 | * FP_PNORM positive normalized non-zero |
2765b840 |
3492 | */ |
a838cfe5 |
3493 | /*#define HAS_FPCLASSL / **/ |
2765b840 |
3494 | |
a838cfe5 |
3495 | /* HAS_NL_LANGINFO: |
3496 | * This symbol, if defined, indicates that the nl_langinfo routine is |
3497 | * available to return local data. You will also need <langinfo.h> |
3498 | * and therefore I_LANGINFO. |
e561a5ff |
3499 | */ |
a838cfe5 |
3500 | /*#define HAS_NL_LANGINFO / **/ |
e561a5ff |
3501 | |
a838cfe5 |
3502 | /* HAS_PROCSELFEXE: |
3503 | * This symbol is defined if PROCSELFEXE_PATH is a symlink |
3504 | * to the absolute pathname of the executing program. |
49a78c82 |
3505 | */ |
10b31d5d |
3506 | /* PROCSELFEXE_PATH: |
3507 | * If HAS_PROCSELFEXE is defined this symbol is the filename |
3508 | * of the symbolic link pointing to the absolute pathname of |
3509 | * the executing program. |
3510 | */ |
a838cfe5 |
3511 | /*#define HAS_PROCSELFEXE / **/ |
3512 | #if defined(HAS_PROCSELFEXE) && !defined(PROCSELFEXE_PATH) |
3513 | #define PROCSELFEXE_PATH /**/ |
3514 | #endif |
49a78c82 |
3515 | |
a838cfe5 |
3516 | /* HAS_SIGPROCMASK: |
3517 | * This symbol, if defined, indicates that the sigprocmask |
3518 | * system call is available to examine or change the signal mask |
3519 | * of the calling process. |
2ef53570 |
3520 | */ |
a838cfe5 |
3521 | /*#define HAS_SIGPROCMASK / **/ |
2ef53570 |
3522 | |
a838cfe5 |
3523 | /* HAS_SOCKATMARK: |
3524 | * This symbol, if defined, indicates that the sockatmark routine is |
3525 | * available to test whether a socket is at the out-of-band mark. |
eef837ea |
3526 | */ |
a838cfe5 |
3527 | /*#define HAS_SOCKATMARK / **/ |
3528 | |
3529 | /* HAS_SOCKATMARK_PROTO: |
3530 | * This symbol, if defined, indicates that the system provides |
3531 | * a prototype for the sockatmark() function. Otherwise, it is up |
3532 | * to the program to supply one. A good guess is |
c68a00c0 |
3533 | * extern int sockatmark(int); |
e9a8643a |
3534 | */ |
a838cfe5 |
3535 | /*#define HAS_SOCKATMARK_PROTO / **/ |
3536 | |
3537 | /* HAS_SETRESGID_PROTO: |
3538 | * This symbol, if defined, indicates that the system provides |
3539 | * a prototype for the setresgid() function. Otherwise, it is up |
3540 | * to the program to supply one. Good guesses are |
3541 | * extern int setresgid(uid_t ruid, uid_t euid, uid_t suid); |
e9a8643a |
3542 | */ |
a838cfe5 |
3543 | /*#define HAS_SETRESGID_PROTO / **/ |
eef837ea |
3544 | |
a838cfe5 |
3545 | /* HAS_SETRESUID_PROTO: |
3546 | * This symbol, if defined, indicates that the system provides |
3547 | * a prototype for the setresuid() function. Otherwise, it is up |
3548 | * to the program to supply one. Good guesses are |
3549 | * extern int setresuid(uid_t ruid, uid_t euid, uid_t suid); |
640374d0 |
3550 | */ |
a838cfe5 |
3551 | /*#define HAS_SETRESUID_PROTO / **/ |
640374d0 |
3552 | |
a838cfe5 |
3553 | /* HAS_STRFTIME: |
3554 | * This symbol, if defined, indicates that the strftime routine is |
3555 | * available to do time formatting. |
b3c85772 |
3556 | */ |
a838cfe5 |
3557 | /*#define HAS_STRFTIME / **/ |
b3c85772 |
3558 | |
a838cfe5 |
3559 | /* HAS_SYSCALL_PROTO: |
3560 | * This symbol, if defined, indicates that the system provides |
3561 | * a prototype for the syscall() function. Otherwise, it is up |
3562 | * to the program to supply one. Good guesses are |
3563 | * extern int syscall(int, ...); |
3564 | * extern int syscall(long, ...); |
2ef53570 |
3565 | */ |
a838cfe5 |
3566 | /*#define HAS_SYSCALL_PROTO / **/ |
2ef53570 |
3567 | |
a838cfe5 |
3568 | /* U32_ALIGNMENT_REQUIRED: |
3569 | * This symbol, if defined, indicates that you must access |
3570 | * character data through U32-aligned pointers. |
4e0554ec |
3571 | */ |
a838cfe5 |
3572 | #define U32_ALIGNMENT_REQUIRED /**/ |
4e0554ec |
3573 | |
a838cfe5 |
3574 | /* HAS_USLEEP_PROTO: |
3575 | * This symbol, if defined, indicates that the system provides |
3576 | * a prototype for the usleep() function. Otherwise, it is up |
3577 | * to the program to supply one. A good guess is |
3578 | * extern int usleep(useconds_t); |
2ef53570 |
3579 | */ |
a838cfe5 |
3580 | /*#define HAS_USLEEP_PROTO / **/ |
2ef53570 |
3581 | |
a838cfe5 |
3582 | /* I_FP: |
3583 | * This symbol, if defined, indicates that <fp.h> exists and |
3584 | * should be included. |
758a5d79 |
3585 | */ |
a838cfe5 |
3586 | /*#define I_FP / **/ |
758a5d79 |
3587 | |
a838cfe5 |
3588 | /* I_LANGINFO: |
3589 | * This symbol, if defined, indicates that <langinfo.h> exists and |
3590 | * should be included. |
404cab08 |
3591 | */ |
a838cfe5 |
3592 | /*#define I_LANGINFO / **/ |
404cab08 |
3593 | |
a838cfe5 |
3594 | /* HAS_PTHREAD_ATFORK: |
3595 | * This symbol, if defined, indicates that the pthread_atfork routine |
3596 | * is available setup fork handlers. |
d6483fcc |
3597 | */ |
a838cfe5 |
3598 | /*#define HAS_PTHREAD_ATFORK / **/ |
d6483fcc |
3599 | |
3ebb1980 |
3600 | #endif |