Commit | Line | Data |
a0d0e21e |
1 | =head1 NAME |
2 | |
3 | perlvar - Perl predefined variables |
4 | |
5 | =head1 DESCRIPTION |
6 | |
7 | =head2 Predefined Names |
8 | |
9 | The following names have special meaning to Perl. Most of the |
5f05dabc |
10 | punctuation names have reasonable mnemonics, or analogues in one of |
a0d0e21e |
11 | the shells. Nevertheless, if you wish to use the long variable names, |
12 | you just need to say |
13 | |
14 | use English; |
15 | |
16 | at the top of your program. This will alias all the short names to the |
17 | long names in the current package. Some of them even have medium names, |
18 | generally borrowed from B<awk>. |
19 | |
20 | To go a step further, those variables that depend on the currently |
21 | selected filehandle may instead be set by calling an object method on |
22 | the FileHandle object. (Summary lines below for this contain the word |
23 | HANDLE.) First you must say |
24 | |
25 | use FileHandle; |
26 | |
27 | after which you may use either |
28 | |
29 | method HANDLE EXPR |
30 | |
31 | or |
32 | |
33 | HANDLE->method(EXPR) |
34 | |
35 | Each of the methods returns the old value of the FileHandle attribute. |
36 | The methods each take an optional EXPR, which if supplied specifies the |
37 | new value for the FileHandle attribute in question. If not supplied, |
38 | most of the methods do nothing to the current value, except for |
39 | autoflush(), which will assume a 1 for you, just to be different. |
40 | |
748a9306 |
41 | A few of these variables are considered "read-only". This means that if |
42 | you try to assign to this variable, either directly or indirectly through |
43 | a reference, you'll raise a run-time exception. |
a0d0e21e |
44 | |
45 | =over 8 |
46 | |
47 | =item $ARG |
48 | |
49 | =item $_ |
50 | |
51 | The default input and pattern-searching space. The following pairs are |
52 | equivalent: |
53 | |
5f05dabc |
54 | while (<>) {...} # equivalent in only while! |
a0d0e21e |
55 | while ($_ = <>) {...} |
56 | |
57 | /^Subject:/ |
58 | $_ =~ /^Subject:/ |
59 | |
60 | tr/a-z/A-Z/ |
61 | $_ =~ tr/a-z/A-Z/ |
62 | |
63 | chop |
64 | chop($_) |
65 | |
cb1a09d0 |
66 | Here are the places where Perl will assume $_ even if you |
67 | don't use it: |
68 | |
69 | =over 3 |
70 | |
71 | =item * |
72 | |
73 | Various unary functions, including functions like ord() and int(), as well |
74 | as the all file tests (C<-f>, C<-d>) except for C<-t>, which defaults to |
75 | STDIN. |
76 | |
77 | =item * |
78 | |
79 | Various list functions like print() and unlink(). |
80 | |
81 | =item * |
82 | |
83 | The pattern matching operations C<m//>, C<s///>, and C<tr///> when used |
84 | without an C<=~> operator. |
85 | |
86 | =item * |
87 | |
88 | The default iterator variable in a C<foreach> loop if no other |
89 | variable is supplied. |
90 | |
91 | =item * |
92 | |
93 | The implicit iterator variable in the grep() and map() functions. |
94 | |
95 | =item * |
96 | |
97 | The default place to put an input record when a C<E<lt>FHE<gt>> |
98 | operation's result is tested by itself as the sole criterion of a C<while> |
99 | test. Note that outside of a C<while> test, this will not happen. |
100 | |
101 | =back |
102 | |
a0d0e21e |
103 | (Mnemonic: underline is understood in certain operations.) |
104 | |
6e2995f4 |
105 | =back |
106 | |
107 | =over 8 |
108 | |
a8f8344d |
109 | =item $E<lt>I<digit>E<gt> |
a0d0e21e |
110 | |
5f05dabc |
111 | Contains the sub-pattern from the corresponding set of parentheses in |
a0d0e21e |
112 | the last pattern matched, not counting patterns matched in nested |
113 | blocks that have been exited already. (Mnemonic: like \digit.) |
114 | These variables are all read-only. |
115 | |
116 | =item $MATCH |
117 | |
118 | =item $& |
119 | |
120 | The string matched by the last successful pattern match (not counting |
121 | any matches hidden within a BLOCK or eval() enclosed by the current |
122 | BLOCK). (Mnemonic: like & in some editors.) This variable is read-only. |
123 | |
124 | =item $PREMATCH |
125 | |
126 | =item $` |
127 | |
128 | The string preceding whatever was matched by the last successful |
129 | pattern match (not counting any matches hidden within a BLOCK or eval |
a8f8344d |
130 | enclosed by the current BLOCK). (Mnemonic: C<`> often precedes a quoted |
a0d0e21e |
131 | string.) This variable is read-only. |
132 | |
133 | =item $POSTMATCH |
134 | |
135 | =item $' |
136 | |
137 | The string following whatever was matched by the last successful |
138 | pattern match (not counting any matches hidden within a BLOCK or eval() |
a8f8344d |
139 | enclosed by the current BLOCK). (Mnemonic: C<'> often follows a quoted |
a0d0e21e |
140 | string.) Example: |
141 | |
142 | $_ = 'abcdefghi'; |
143 | /def/; |
144 | print "$`:$&:$'\n"; # prints abc:def:ghi |
145 | |
146 | This variable is read-only. |
147 | |
148 | =item $LAST_PAREN_MATCH |
149 | |
150 | =item $+ |
151 | |
152 | The last bracket matched by the last search pattern. This is useful if |
153 | you don't know which of a set of alternative patterns matched. For |
154 | example: |
155 | |
156 | /Version: (.*)|Revision: (.*)/ && ($rev = $+); |
157 | |
158 | (Mnemonic: be positive and forward looking.) |
159 | This variable is read-only. |
160 | |
161 | =item $MULTILINE_MATCHING |
162 | |
163 | =item $* |
164 | |
5f05dabc |
165 | Set to 1 to do multi-line matching within a string, 0 to tell Perl |
a0d0e21e |
166 | that it can assume that strings contain a single line, for the purpose |
167 | of optimizing pattern matches. Pattern matches on strings containing |
168 | multiple newlines can produce confusing results when "C<$*>" is 0. Default |
169 | is 0. (Mnemonic: * matches multiple things.) Note that this variable |
5f05dabc |
170 | influences the interpretation of only "C<^>" and "C<$>". A literal newline can |
a0d0e21e |
171 | be searched for even when C<$* == 0>. |
172 | |
5f05dabc |
173 | Use of "C<$*>" is deprecated in modern perls. |
a0d0e21e |
174 | |
175 | =item input_line_number HANDLE EXPR |
176 | |
177 | =item $INPUT_LINE_NUMBER |
178 | |
179 | =item $NR |
180 | |
181 | =item $. |
182 | |
6e2995f4 |
183 | The current input line number for the last file handle from |
a8f8344d |
184 | which you read (or performed a C<seek> or C<tell> on). An |
5f05dabc |
185 | explicit close on a filehandle resets the line number. Because |
4633a7c4 |
186 | "C<E<lt>E<gt>>" never does an explicit close, line numbers increase |
187 | across ARGV files (but see examples under eof()). Localizing C<$.> has |
188 | the effect of also localizing Perl's notion of "the last read |
189 | filehandle". (Mnemonic: many programs use "." to mean the current line |
190 | number.) |
a0d0e21e |
191 | |
192 | =item input_record_separator HANDLE EXPR |
193 | |
194 | =item $INPUT_RECORD_SEPARATOR |
195 | |
196 | =item $RS |
197 | |
198 | =item $/ |
199 | |
200 | The input record separator, newline by default. Works like B<awk>'s RS |
303f2f76 |
201 | variable, including treating empty lines as delimiters if set to the |
a8f8344d |
202 | null string. (Note: An empty line cannot contain any spaces or |
303f2f76 |
203 | tabs.) You may set it to a multicharacter string to match a |
a0d0e21e |
204 | multi-character delimiter. Note that setting it to C<"\n\n"> means |
205 | something slightly different than setting it to C<"">, if the file |
303f2f76 |
206 | contains consecutive empty lines. Setting it to C<""> will treat two |
207 | or more consecutive empty lines as a single empty line. Setting it to |
208 | C<"\n\n"> will blindly assume that the next input character belongs to |
209 | the next paragraph, even if it's a newline. (Mnemonic: / is used to |
a0d0e21e |
210 | delimit line boundaries when quoting poetry.) |
211 | |
212 | undef $/; |
213 | $_ = <FH>; # whole file now here |
214 | s/\n[ \t]+/ /g; |
215 | |
216 | =item autoflush HANDLE EXPR |
217 | |
218 | =item $OUTPUT_AUTOFLUSH |
219 | |
220 | =item $| |
221 | |
222 | If set to nonzero, forces a flush after every write or print on the |
6e2995f4 |
223 | currently selected output channel. Default is 0 (regardless of whether |
5f05dabc |
224 | the channel is actually buffered by the system or not; C<$|> tells you |
225 | only whether you've asked Perl explicitly to flush after each write). |
6e2995f4 |
226 | Note that STDOUT will typically be line buffered if output is to the |
227 | terminal and block buffered otherwise. Setting this variable is useful |
228 | primarily when you are outputting to a pipe, such as when you are running |
229 | a Perl script under rsh and want to see the output as it's happening. This |
230 | has no effect on input buffering. |
cb1a09d0 |
231 | (Mnemonic: when you want your pipes to be piping hot.) |
a0d0e21e |
232 | |
233 | =item output_field_separator HANDLE EXPR |
234 | |
235 | =item $OUTPUT_FIELD_SEPARATOR |
236 | |
237 | =item $OFS |
238 | |
239 | =item $, |
240 | |
241 | The output field separator for the print operator. Ordinarily the |
5f05dabc |
242 | print operator simply prints out the comma-separated fields you |
243 | specify. To get behavior more like B<awk>, set this variable |
a0d0e21e |
244 | as you would set B<awk>'s OFS variable to specify what is printed |
245 | between fields. (Mnemonic: what is printed when there is a , in your |
246 | print statement.) |
247 | |
248 | =item output_record_separator HANDLE EXPR |
249 | |
250 | =item $OUTPUT_RECORD_SEPARATOR |
251 | |
252 | =item $ORS |
253 | |
254 | =item $\ |
255 | |
256 | The output record separator for the print operator. Ordinarily the |
5f05dabc |
257 | print operator simply prints out the comma-separated fields you |
258 | specify, with no trailing newline or record separator assumed. |
259 | To get behavior more like B<awk>, set this variable as you would |
a0d0e21e |
260 | set B<awk>'s ORS variable to specify what is printed at the end of the |
261 | print. (Mnemonic: you set "C<$\>" instead of adding \n at the end of the |
a8f8344d |
262 | print. Also, it's just like C<$/>, but it's what you get "back" from |
a0d0e21e |
263 | Perl.) |
264 | |
265 | =item $LIST_SEPARATOR |
266 | |
267 | =item $" |
268 | |
269 | This is like "C<$,>" except that it applies to array values interpolated |
270 | into a double-quoted string (or similar interpreted string). Default |
271 | is a space. (Mnemonic: obvious, I think.) |
272 | |
273 | =item $SUBSCRIPT_SEPARATOR |
274 | |
275 | =item $SUBSEP |
276 | |
277 | =item $; |
278 | |
279 | The subscript separator for multi-dimensional array emulation. If you |
280 | refer to a hash element as |
281 | |
282 | $foo{$a,$b,$c} |
283 | |
284 | it really means |
285 | |
286 | $foo{join($;, $a, $b, $c)} |
287 | |
288 | But don't put |
289 | |
290 | @foo{$a,$b,$c} # a slice--note the @ |
291 | |
292 | which means |
293 | |
294 | ($foo{$a},$foo{$b},$foo{$c}) |
295 | |
296 | Default is "\034", the same as SUBSEP in B<awk>. Note that if your |
297 | keys contain binary data there might not be any safe value for "C<$;>". |
298 | (Mnemonic: comma (the syntactic subscript separator) is a |
299 | semi-semicolon. Yeah, I know, it's pretty lame, but "C<$,>" is already |
300 | taken for something more important.) |
301 | |
5f05dabc |
302 | Consider using "real" multi-dimensional arrays. |
a0d0e21e |
303 | |
304 | =item $OFMT |
305 | |
306 | =item $# |
307 | |
308 | The output format for printed numbers. This variable is a half-hearted |
309 | attempt to emulate B<awk>'s OFMT variable. There are times, however, |
310 | when B<awk> and Perl have differing notions of what is in fact |
6e2995f4 |
311 | numeric. The initial value is %.I<n>g, where I<n> is the value |
312 | of the macro DBL_DIG from your system's F<float.h>. This is different from |
313 | B<awk>'s default OFMT setting of %.6g, so you need to set "C<$#>" |
314 | explicitly to get B<awk>'s value. (Mnemonic: # is the number sign.) |
a0d0e21e |
315 | |
5f05dabc |
316 | Use of "C<$#>" is deprecated. |
a0d0e21e |
317 | |
318 | =item format_page_number HANDLE EXPR |
319 | |
320 | =item $FORMAT_PAGE_NUMBER |
321 | |
322 | =item $% |
323 | |
324 | The current page number of the currently selected output channel. |
325 | (Mnemonic: % is page number in B<nroff>.) |
326 | |
327 | =item format_lines_per_page HANDLE EXPR |
328 | |
329 | =item $FORMAT_LINES_PER_PAGE |
330 | |
331 | =item $= |
332 | |
333 | The current page length (printable lines) of the currently selected |
334 | output channel. Default is 60. (Mnemonic: = has horizontal lines.) |
335 | |
336 | =item format_lines_left HANDLE EXPR |
337 | |
338 | =item $FORMAT_LINES_LEFT |
339 | |
340 | =item $- |
341 | |
342 | The number of lines left on the page of the currently selected output |
343 | channel. (Mnemonic: lines_on_page - lines_printed.) |
344 | |
345 | =item format_name HANDLE EXPR |
346 | |
347 | =item $FORMAT_NAME |
348 | |
349 | =item $~ |
350 | |
351 | The name of the current report format for the currently selected output |
352 | channel. Default is name of the filehandle. (Mnemonic: brother to |
353 | "C<$^>".) |
354 | |
355 | =item format_top_name HANDLE EXPR |
356 | |
357 | =item $FORMAT_TOP_NAME |
358 | |
359 | =item $^ |
360 | |
361 | The name of the current top-of-page format for the currently selected |
362 | output channel. Default is name of the filehandle with _TOP |
363 | appended. (Mnemonic: points to top of page.) |
364 | |
365 | =item format_line_break_characters HANDLE EXPR |
366 | |
367 | =item $FORMAT_LINE_BREAK_CHARACTERS |
368 | |
369 | =item $: |
370 | |
371 | The current set of characters after which a string may be broken to |
372 | fill continuation fields (starting with ^) in a format. Default is |
373 | S<" \n-">, to break on whitespace or hyphens. (Mnemonic: a "colon" in |
374 | poetry is a part of a line.) |
375 | |
376 | =item format_formfeed HANDLE EXPR |
377 | |
378 | =item $FORMAT_FORMFEED |
379 | |
380 | =item $^L |
381 | |
5f05dabc |
382 | What formats output to perform a form feed. Default is \f. |
a0d0e21e |
383 | |
384 | =item $ACCUMULATOR |
385 | |
386 | =item $^A |
387 | |
388 | The current value of the write() accumulator for format() lines. A format |
389 | contains formline() commands that put their result into C<$^A>. After |
390 | calling its format, write() prints out the contents of C<$^A> and empties. |
391 | So you never actually see the contents of C<$^A> unless you call |
392 | formline() yourself and then look at it. See L<perlform> and |
393 | L<perlfunc/formline()>. |
394 | |
395 | =item $CHILD_ERROR |
396 | |
397 | =item $? |
398 | |
5f05dabc |
399 | The status returned by the last pipe close, back-tick (C<``>) command, |
a0d0e21e |
400 | or system() operator. Note that this is the status word returned by |
401 | the wait() system call, so the exit value of the subprocess is actually |
402 | (C<$? E<gt>E<gt> 8>). Thus on many systems, C<$? & 255> gives which signal, |
403 | if any, the process died from, and whether there was a core dump. |
404 | (Mnemonic: similar to B<sh> and B<ksh>.) |
405 | |
a8f8344d |
406 | Inside an C<END> subroutine C<$?> contains the value that is going to be |
407 | given to C<exit()>. You can modify C<$?> in an C<END> subroutine to |
408 | change the exit status of the script. |
409 | |
a0d0e21e |
410 | =item $OS_ERROR |
411 | |
412 | =item $ERRNO |
413 | |
414 | =item $! |
415 | |
416 | If used in a numeric context, yields the current value of errno, with |
417 | all the usual caveats. (This means that you shouldn't depend on the |
418 | value of "C<$!>" to be anything in particular unless you've gotten a |
419 | specific error return indicating a system error.) If used in a string |
420 | context, yields the corresponding system error string. You can assign |
5f05dabc |
421 | to "C<$!>" to set I<errno> if, for instance, you want "C<$!>" to return the |
a0d0e21e |
422 | string for error I<n>, or you want to set the exit value for the die() |
423 | operator. (Mnemonic: What just went bang?) |
424 | |
5c055ba3 |
425 | =item $EXTENDED_OS_ERROR |
426 | |
427 | =item $^E |
428 | |
429 | More specific information about the last system error than that |
2c19844b |
430 | provided by C<$!>, if available. (If not, it's just C<$!> again, except under |
431 | OS/2.) |
5f05dabc |
432 | At the moment, this differs from C<$!> under only VMS and OS/2, where it |
2c19844b |
433 | provides the VMS status value from the last system error, and OS/2 error |
434 | code of the last call to OS/2 API which was not directed via CRT. The |
5c055ba3 |
435 | caveats mentioned in the description of C<$!> apply here, too. |
436 | (Mnemonic: Extra error explanation.) |
437 | |
2c19844b |
438 | Note that under OS/2 C<$!> and C<$^E> do not track each other, so if an |
439 | OS/2-specific call is performed, you may need to check both. |
5c055ba3 |
440 | |
a0d0e21e |
441 | =item $EVAL_ERROR |
442 | |
443 | =item $@ |
444 | |
445 | The Perl syntax error message from the last eval() command. If null, the |
446 | last eval() parsed and executed correctly (although the operations you |
447 | invoked may have failed in the normal fashion). (Mnemonic: Where was |
448 | the syntax error "at"?) |
449 | |
748a9306 |
450 | Note that warning messages are not collected in this variable. You can, |
a8f8344d |
451 | however, set up a routine to process warnings by setting C<$SIG{__WARN__}> |
452 | below. |
748a9306 |
453 | |
a0d0e21e |
454 | =item $PROCESS_ID |
455 | |
456 | =item $PID |
457 | |
458 | =item $$ |
459 | |
460 | The process number of the Perl running this script. (Mnemonic: same |
461 | as shells.) |
462 | |
463 | =item $REAL_USER_ID |
464 | |
465 | =item $UID |
466 | |
467 | =item $< |
468 | |
469 | The real uid of this process. (Mnemonic: it's the uid you came I<FROM>, |
470 | if you're running setuid.) |
471 | |
472 | =item $EFFECTIVE_USER_ID |
473 | |
474 | =item $EUID |
475 | |
476 | =item $> |
477 | |
478 | The effective uid of this process. Example: |
479 | |
480 | $< = $>; # set real to effective uid |
481 | ($<,$>) = ($>,$<); # swap real and effective uid |
482 | |
483 | (Mnemonic: it's the uid you went I<TO>, if you're running setuid.) Note: |
5f05dabc |
484 | "C<$E<lt>>" and "C<$E<gt>>" can be swapped on only machines supporting setreuid(). |
a0d0e21e |
485 | |
486 | =item $REAL_GROUP_ID |
487 | |
488 | =item $GID |
489 | |
490 | =item $( |
491 | |
492 | The real gid of this process. If you are on a machine that supports |
493 | membership in multiple groups simultaneously, gives a space separated |
494 | list of groups you are in. The first number is the one returned by |
495 | getgid(), and the subsequent ones by getgroups(), one of which may be |
496 | the same as the first number. (Mnemonic: parentheses are used to I<GROUP> |
497 | things. The real gid is the group you I<LEFT>, if you're running setgid.) |
498 | |
499 | =item $EFFECTIVE_GROUP_ID |
500 | |
501 | =item $EGID |
502 | |
503 | =item $) |
504 | |
505 | The effective gid of this process. If you are on a machine that |
506 | supports membership in multiple groups simultaneously, gives a space |
507 | separated list of groups you are in. The first number is the one |
508 | returned by getegid(), and the subsequent ones by getgroups(), one of |
509 | which may be the same as the first number. (Mnemonic: parentheses are |
510 | used to I<GROUP> things. The effective gid is the group that's I<RIGHT> for |
511 | you, if you're running setgid.) |
512 | |
5f05dabc |
513 | Note: "C<$E<lt>>", "C<$E<gt>>", "C<$(>" and "C<$)>" can be set only on |
514 | machines that support the corresponding I<set[re][ug]id()> routine. "C<$(>" |
515 | and "C<$)>" can be swapped on only machines supporting setregid(). Because |
516 | Perl doesn't currently use initgroups(), you can't set your group vector to |
517 | multiple groups. |
a0d0e21e |
518 | |
519 | =item $PROGRAM_NAME |
520 | |
521 | =item $0 |
522 | |
523 | Contains the name of the file containing the Perl script being |
524 | executed. Assigning to "C<$0>" modifies the argument area that the ps(1) |
525 | program sees. This is more useful as a way of indicating the |
526 | current program state than it is for hiding the program you're running. |
527 | (Mnemonic: same as B<sh> and B<ksh>.) |
528 | |
529 | =item $[ |
530 | |
531 | The index of the first element in an array, and of the first character |
532 | in a substring. Default is 0, but you could set it to 1 to make |
533 | Perl behave more like B<awk> (or Fortran) when subscripting and when |
534 | evaluating the index() and substr() functions. (Mnemonic: [ begins |
535 | subscripts.) |
536 | |
537 | As of Perl 5, assignment to "C<$[>" is treated as a compiler directive, |
538 | and cannot influence the behavior of any other file. Its use is |
539 | discouraged. |
540 | |
541 | =item $PERL_VERSION |
542 | |
543 | =item $] |
544 | |
cb1a09d0 |
545 | The string printed out when you say C<perl -v>. |
546 | (This is currently I<BROKEN>). |
547 | It can be used to |
a0d0e21e |
548 | determine at the beginning of a script whether the perl interpreter |
549 | executing the script is in the right range of versions. If used in a |
550 | numeric context, returns the version + patchlevel / 1000. Example: |
551 | |
552 | # see if getc is available |
553 | ($version,$patchlevel) = |
554 | $] =~ /(\d+\.\d+).*\nPatch level: (\d+)/; |
555 | print STDERR "(No filename completion available.)\n" |
556 | if $version * 1000 + $patchlevel < 2016; |
557 | |
558 | or, used numerically, |
559 | |
560 | warn "No checksumming!\n" if $] < 3.019; |
561 | |
562 | (Mnemonic: Is this version of perl in the right bracket?) |
563 | |
564 | =item $DEBUGGING |
565 | |
566 | =item $^D |
567 | |
568 | The current value of the debugging flags. (Mnemonic: value of B<-D> |
569 | switch.) |
570 | |
571 | =item $SYSTEM_FD_MAX |
572 | |
573 | =item $^F |
574 | |
575 | The maximum system file descriptor, ordinarily 2. System file |
576 | descriptors are passed to exec()ed processes, while higher file |
577 | descriptors are not. Also, during an open(), system file descriptors are |
578 | preserved even if the open() fails. (Ordinary file descriptors are |
579 | closed before the open() is attempted.) Note that the close-on-exec |
580 | status of a file descriptor will be decided according to the value of |
581 | C<$^F> at the time of the open, not the time of the exec. |
582 | |
6e2995f4 |
583 | =item $^H |
584 | |
585 | The current set of syntax checks enabled by C<use strict>. See the |
586 | documentation of C<strict> for more details. |
587 | |
a0d0e21e |
588 | =item $INPLACE_EDIT |
589 | |
590 | =item $^I |
591 | |
592 | The current value of the inplace-edit extension. Use C<undef> to disable |
593 | inplace editing. (Mnemonic: value of B<-i> switch.) |
594 | |
5c055ba3 |
595 | =item $OSNAME |
6e2995f4 |
596 | |
5c055ba3 |
597 | =item $^O |
598 | |
599 | The name of the operating system under which this copy of Perl was |
600 | built, as determined during the configuration process. The value |
601 | is identical to C<$Config{'osname'}>. |
602 | |
a0d0e21e |
603 | =item $PERLDB |
604 | |
605 | =item $^P |
606 | |
607 | The internal flag that the debugger clears so that it doesn't debug |
5c055ba3 |
608 | itself. You could conceivably disable debugging yourself by clearing |
a0d0e21e |
609 | it. |
610 | |
611 | =item $BASETIME |
612 | |
613 | =item $^T |
614 | |
615 | The time at which the script began running, in seconds since the |
5f05dabc |
616 | epoch (beginning of 1970). The values returned by the B<-M>, B<-A>, |
a0d0e21e |
617 | and B<-C> filetests are |
618 | based on this value. |
619 | |
620 | =item $WARNING |
621 | |
622 | =item $^W |
623 | |
303f2f76 |
624 | The current value of the warning switch, either TRUE or FALSE. |
625 | (Mnemonic: related to the B<-w> switch.) |
a0d0e21e |
626 | |
627 | =item $EXECUTABLE_NAME |
628 | |
629 | =item $^X |
630 | |
631 | The name that the Perl binary itself was executed as, from C's C<argv[0]>. |
632 | |
633 | =item $ARGV |
634 | |
a8f8344d |
635 | contains the name of the current file when reading from E<lt>E<gt>. |
a0d0e21e |
636 | |
637 | =item @ARGV |
638 | |
639 | The array @ARGV contains the command line arguments intended for the |
640 | script. Note that C<$#ARGV> is the generally number of arguments minus |
5f05dabc |
641 | one, because C<$ARGV[0]> is the first argument, I<NOT> the command name. See |
a0d0e21e |
642 | "C<$0>" for the command name. |
643 | |
644 | =item @INC |
645 | |
646 | The array @INC contains the list of places to look for Perl scripts to |
647 | be evaluated by the C<do EXPR>, C<require>, or C<use> constructs. It |
648 | initially consists of the arguments to any B<-I> command line switches, |
6e2995f4 |
649 | followed by the default Perl library, probably F</usr/local/lib/perl>, |
cb1a09d0 |
650 | followed by ".", to represent the current directory. If you need to |
5f05dabc |
651 | modify this at runtime, you should use the C<use lib> pragma |
652 | to get the machine-dependent library properly loaded also: |
a0d0e21e |
653 | |
cb1a09d0 |
654 | use lib '/mypath/libdir/'; |
655 | use SomeMod; |
303f2f76 |
656 | |
a0d0e21e |
657 | =item %INC |
658 | |
659 | The hash %INC contains entries for each filename that has |
660 | been included via C<do> or C<require>. The key is the filename you |
661 | specified, and the value is the location of the file actually found. |
662 | The C<require> command uses this array to determine whether a given file |
663 | has already been included. |
664 | |
665 | =item $ENV{expr} |
666 | |
667 | The hash %ENV contains your current environment. Setting a |
668 | value in C<ENV> changes the environment for child processes. |
669 | |
670 | =item $SIG{expr} |
671 | |
672 | The hash %SIG is used to set signal handlers for various |
673 | signals. Example: |
674 | |
675 | sub handler { # 1st argument is signal name |
676 | local($sig) = @_; |
677 | print "Caught a SIG$sig--shutting down\n"; |
678 | close(LOG); |
679 | exit(0); |
680 | } |
681 | |
682 | $SIG{'INT'} = 'handler'; |
683 | $SIG{'QUIT'} = 'handler'; |
684 | ... |
685 | $SIG{'INT'} = 'DEFAULT'; # restore default action |
686 | $SIG{'QUIT'} = 'IGNORE'; # ignore SIGQUIT |
687 | |
5f05dabc |
688 | The %SIG array contains values for only the signals actually set within |
a0d0e21e |
689 | the Perl script. Here are some other examples: |
690 | |
691 | $SIG{PIPE} = Plumber; # SCARY!! |
692 | $SIG{"PIPE"} = "Plumber"; # just fine, assumes main::Plumber |
693 | $SIG{"PIPE"} = \&Plumber; # just fine; assume current Plumber |
694 | $SIG{"PIPE"} = Plumber(); # oops, what did Plumber() return?? |
695 | |
696 | The one marked scary is problematic because it's a bareword, which means |
697 | sometimes it's a string representing the function, and sometimes it's |
698 | going to call the subroutine call right then and there! Best to be sure |
a8f8344d |
699 | and quote it or take a reference to it. *Plumber works too. See L<perlsub>. |
748a9306 |
700 | |
701 | Certain internal hooks can be also set using the %SIG hash. The |
a8f8344d |
702 | routine indicated by C<$SIG{__WARN__}> is called when a warning message is |
748a9306 |
703 | about to be printed. The warning message is passed as the first |
704 | argument. The presence of a __WARN__ hook causes the ordinary printing |
705 | of warnings to STDERR to be suppressed. You can use this to save warnings |
706 | in a variable, or turn warnings into fatal errors, like this: |
707 | |
708 | local $SIG{__WARN__} = sub { die $_[0] }; |
709 | eval $proggie; |
710 | |
a8f8344d |
711 | The routine indicated by C<$SIG{__DIE__}> is called when a fatal exception |
748a9306 |
712 | is about to be thrown. The error message is passed as the first |
713 | argument. When a __DIE__ hook routine returns, the exception |
714 | processing continues as it would have in the absence of the hook, |
cb1a09d0 |
715 | unless the hook routine itself exits via a C<goto>, a loop exit, or a die(). |
716 | The __DIE__ handler is explicitly disabled during the call, so that you |
717 | can die from a __DIE__ handler. Similarly for __WARN__. |
a0d0e21e |
718 | |
719 | =back |