Commit | Line | Data |
a0d0e21e |
1 | =head1 NAME |
2 | |
3 | perlvar - Perl predefined variables |
4 | |
5 | =head1 DESCRIPTION |
6 | |
7 | =head2 Predefined Names |
8 | |
9 | The following names have special meaning to Perl. Most of the |
5f05dabc |
10 | punctuation names have reasonable mnemonics, or analogues in one of |
a0d0e21e |
11 | the shells. Nevertheless, if you wish to use the long variable names, |
12 | you just need to say |
13 | |
14 | use English; |
15 | |
16 | at the top of your program. This will alias all the short names to the |
17 | long names in the current package. Some of them even have medium names, |
18 | generally borrowed from B<awk>. |
19 | |
20 | To go a step further, those variables that depend on the currently |
fb73857a |
21 | selected filehandle may instead (and preferably) be set by calling an |
22 | object method on the FileHandle object. (Summary lines below for this |
23 | contain the word HANDLE.) First you must say |
a0d0e21e |
24 | |
25 | use FileHandle; |
26 | |
27 | after which you may use either |
28 | |
29 | method HANDLE EXPR |
30 | |
31 | or |
32 | |
33 | HANDLE->method(EXPR) |
34 | |
35 | Each of the methods returns the old value of the FileHandle attribute. |
36 | The methods each take an optional EXPR, which if supplied specifies the |
37 | new value for the FileHandle attribute in question. If not supplied, |
38 | most of the methods do nothing to the current value, except for |
39 | autoflush(), which will assume a 1 for you, just to be different. |
40 | |
748a9306 |
41 | A few of these variables are considered "read-only". This means that if |
42 | you try to assign to this variable, either directly or indirectly through |
43 | a reference, you'll raise a run-time exception. |
a0d0e21e |
44 | |
fb73857a |
45 | The following list is ordered by scalar variables first, then the |
46 | arrays, then the hashes (except $^M was added in the wrong place). |
47 | This is somewhat obscured by the fact that %ENV and %SIG are listed as |
48 | $ENV{expr} and $SIG{expr}. |
49 | |
50 | |
a0d0e21e |
51 | =over 8 |
52 | |
53 | =item $ARG |
54 | |
55 | =item $_ |
56 | |
57 | The default input and pattern-searching space. The following pairs are |
58 | equivalent: |
59 | |
5f05dabc |
60 | while (<>) {...} # equivalent in only while! |
54310121 |
61 | while (defined($_ = <>)) {...} |
a0d0e21e |
62 | |
63 | /^Subject:/ |
64 | $_ =~ /^Subject:/ |
65 | |
66 | tr/a-z/A-Z/ |
67 | $_ =~ tr/a-z/A-Z/ |
68 | |
69 | chop |
70 | chop($_) |
71 | |
54310121 |
72 | Here are the places where Perl will assume $_ even if you |
cb1a09d0 |
73 | don't use it: |
74 | |
75 | =over 3 |
76 | |
77 | =item * |
78 | |
79 | Various unary functions, including functions like ord() and int(), as well |
80 | as the all file tests (C<-f>, C<-d>) except for C<-t>, which defaults to |
81 | STDIN. |
82 | |
83 | =item * |
84 | |
85 | Various list functions like print() and unlink(). |
86 | |
87 | =item * |
88 | |
89 | The pattern matching operations C<m//>, C<s///>, and C<tr///> when used |
90 | without an C<=~> operator. |
91 | |
54310121 |
92 | =item * |
cb1a09d0 |
93 | |
94 | The default iterator variable in a C<foreach> loop if no other |
95 | variable is supplied. |
96 | |
54310121 |
97 | =item * |
cb1a09d0 |
98 | |
99 | The implicit iterator variable in the grep() and map() functions. |
100 | |
54310121 |
101 | =item * |
cb1a09d0 |
102 | |
103 | The default place to put an input record when a C<E<lt>FHE<gt>> |
104 | operation's result is tested by itself as the sole criterion of a C<while> |
105 | test. Note that outside of a C<while> test, this will not happen. |
106 | |
107 | =back |
108 | |
a0d0e21e |
109 | (Mnemonic: underline is understood in certain operations.) |
110 | |
6e2995f4 |
111 | =back |
112 | |
113 | =over 8 |
114 | |
a8f8344d |
115 | =item $E<lt>I<digit>E<gt> |
a0d0e21e |
116 | |
54310121 |
117 | Contains the subpattern from the corresponding set of parentheses in |
a0d0e21e |
118 | the last pattern matched, not counting patterns matched in nested |
119 | blocks that have been exited already. (Mnemonic: like \digit.) |
120 | These variables are all read-only. |
121 | |
122 | =item $MATCH |
123 | |
124 | =item $& |
125 | |
126 | The string matched by the last successful pattern match (not counting |
127 | any matches hidden within a BLOCK or eval() enclosed by the current |
128 | BLOCK). (Mnemonic: like & in some editors.) This variable is read-only. |
129 | |
130 | =item $PREMATCH |
131 | |
132 | =item $` |
133 | |
134 | The string preceding whatever was matched by the last successful |
135 | pattern match (not counting any matches hidden within a BLOCK or eval |
a8f8344d |
136 | enclosed by the current BLOCK). (Mnemonic: C<`> often precedes a quoted |
a0d0e21e |
137 | string.) This variable is read-only. |
138 | |
139 | =item $POSTMATCH |
140 | |
141 | =item $' |
142 | |
143 | The string following whatever was matched by the last successful |
144 | pattern match (not counting any matches hidden within a BLOCK or eval() |
a8f8344d |
145 | enclosed by the current BLOCK). (Mnemonic: C<'> often follows a quoted |
a0d0e21e |
146 | string.) Example: |
147 | |
148 | $_ = 'abcdefghi'; |
149 | /def/; |
150 | print "$`:$&:$'\n"; # prints abc:def:ghi |
151 | |
152 | This variable is read-only. |
153 | |
154 | =item $LAST_PAREN_MATCH |
155 | |
156 | =item $+ |
157 | |
158 | The last bracket matched by the last search pattern. This is useful if |
159 | you don't know which of a set of alternative patterns matched. For |
160 | example: |
161 | |
162 | /Version: (.*)|Revision: (.*)/ && ($rev = $+); |
163 | |
164 | (Mnemonic: be positive and forward looking.) |
165 | This variable is read-only. |
166 | |
167 | =item $MULTILINE_MATCHING |
168 | |
169 | =item $* |
170 | |
4a6725af |
171 | Set to 1 to do multi-line matching within a string, 0 to tell Perl |
a0d0e21e |
172 | that it can assume that strings contain a single line, for the purpose |
173 | of optimizing pattern matches. Pattern matches on strings containing |
174 | multiple newlines can produce confusing results when "C<$*>" is 0. Default |
175 | is 0. (Mnemonic: * matches multiple things.) Note that this variable |
5f05dabc |
176 | influences the interpretation of only "C<^>" and "C<$>". A literal newline can |
a0d0e21e |
177 | be searched for even when C<$* == 0>. |
178 | |
5f05dabc |
179 | Use of "C<$*>" is deprecated in modern perls. |
a0d0e21e |
180 | |
181 | =item input_line_number HANDLE EXPR |
182 | |
183 | =item $INPUT_LINE_NUMBER |
184 | |
185 | =item $NR |
186 | |
187 | =item $. |
188 | |
6e2995f4 |
189 | The current input line number for the last file handle from |
a8f8344d |
190 | which you read (or performed a C<seek> or C<tell> on). An |
5f05dabc |
191 | explicit close on a filehandle resets the line number. Because |
4633a7c4 |
192 | "C<E<lt>E<gt>>" never does an explicit close, line numbers increase |
193 | across ARGV files (but see examples under eof()). Localizing C<$.> has |
194 | the effect of also localizing Perl's notion of "the last read |
195 | filehandle". (Mnemonic: many programs use "." to mean the current line |
196 | number.) |
a0d0e21e |
197 | |
198 | =item input_record_separator HANDLE EXPR |
199 | |
200 | =item $INPUT_RECORD_SEPARATOR |
201 | |
202 | =item $RS |
203 | |
204 | =item $/ |
205 | |
206 | The input record separator, newline by default. Works like B<awk>'s RS |
303f2f76 |
207 | variable, including treating empty lines as delimiters if set to the |
54310121 |
208 | null string. (Note: An empty line cannot contain any spaces or tabs.) |
4a6725af |
209 | You may set it to a multi-character string to match a multi-character |
54310121 |
210 | delimiter, or to C<undef> to read to end of file. Note that setting it |
211 | to C<"\n\n"> means something slightly different than setting it to |
212 | C<"">, if the file contains consecutive empty lines. Setting it to |
213 | C<""> will treat two or more consecutive empty lines as a single empty |
214 | line. Setting it to C<"\n\n"> will blindly assume that the next input |
215 | character belongs to the next paragraph, even if it's a newline. |
216 | (Mnemonic: / is used to delimit line boundaries when quoting poetry.) |
a0d0e21e |
217 | |
218 | undef $/; |
219 | $_ = <FH>; # whole file now here |
220 | s/\n[ \t]+/ /g; |
221 | |
68dc0745 |
222 | Remember: the value of $/ is a string, not a regexp. AWK has to be |
223 | better for something :-) |
224 | |
a0d0e21e |
225 | =item autoflush HANDLE EXPR |
226 | |
227 | =item $OUTPUT_AUTOFLUSH |
228 | |
229 | =item $| |
230 | |
54310121 |
231 | If set to nonzero, forces a flush right away and after every write or print on the |
6e2995f4 |
232 | currently selected output channel. Default is 0 (regardless of whether |
5f05dabc |
233 | the channel is actually buffered by the system or not; C<$|> tells you |
54310121 |
234 | only whether you've asked Perl explicitly to flush after each write). |
6e2995f4 |
235 | Note that STDOUT will typically be line buffered if output is to the |
236 | terminal and block buffered otherwise. Setting this variable is useful |
237 | primarily when you are outputting to a pipe, such as when you are running |
238 | a Perl script under rsh and want to see the output as it's happening. This |
239 | has no effect on input buffering. |
cb1a09d0 |
240 | (Mnemonic: when you want your pipes to be piping hot.) |
a0d0e21e |
241 | |
242 | =item output_field_separator HANDLE EXPR |
243 | |
244 | =item $OUTPUT_FIELD_SEPARATOR |
245 | |
246 | =item $OFS |
247 | |
248 | =item $, |
249 | |
250 | The output field separator for the print operator. Ordinarily the |
5f05dabc |
251 | print operator simply prints out the comma-separated fields you |
252 | specify. To get behavior more like B<awk>, set this variable |
a0d0e21e |
253 | as you would set B<awk>'s OFS variable to specify what is printed |
254 | between fields. (Mnemonic: what is printed when there is a , in your |
255 | print statement.) |
256 | |
257 | =item output_record_separator HANDLE EXPR |
258 | |
259 | =item $OUTPUT_RECORD_SEPARATOR |
260 | |
261 | =item $ORS |
262 | |
263 | =item $\ |
264 | |
265 | The output record separator for the print operator. Ordinarily the |
5f05dabc |
266 | print operator simply prints out the comma-separated fields you |
267 | specify, with no trailing newline or record separator assumed. |
268 | To get behavior more like B<awk>, set this variable as you would |
a0d0e21e |
269 | set B<awk>'s ORS variable to specify what is printed at the end of the |
270 | print. (Mnemonic: you set "C<$\>" instead of adding \n at the end of the |
a8f8344d |
271 | print. Also, it's just like C<$/>, but it's what you get "back" from |
a0d0e21e |
272 | Perl.) |
273 | |
274 | =item $LIST_SEPARATOR |
275 | |
276 | =item $" |
277 | |
278 | This is like "C<$,>" except that it applies to array values interpolated |
279 | into a double-quoted string (or similar interpreted string). Default |
280 | is a space. (Mnemonic: obvious, I think.) |
281 | |
282 | =item $SUBSCRIPT_SEPARATOR |
283 | |
284 | =item $SUBSEP |
285 | |
286 | =item $; |
287 | |
54310121 |
288 | The subscript separator for multidimensional array emulation. If you |
a0d0e21e |
289 | refer to a hash element as |
290 | |
291 | $foo{$a,$b,$c} |
292 | |
293 | it really means |
294 | |
295 | $foo{join($;, $a, $b, $c)} |
296 | |
297 | But don't put |
298 | |
299 | @foo{$a,$b,$c} # a slice--note the @ |
300 | |
301 | which means |
302 | |
303 | ($foo{$a},$foo{$b},$foo{$c}) |
304 | |
305 | Default is "\034", the same as SUBSEP in B<awk>. Note that if your |
306 | keys contain binary data there might not be any safe value for "C<$;>". |
307 | (Mnemonic: comma (the syntactic subscript separator) is a |
308 | semi-semicolon. Yeah, I know, it's pretty lame, but "C<$,>" is already |
309 | taken for something more important.) |
310 | |
54310121 |
311 | Consider using "real" multidimensional arrays. |
a0d0e21e |
312 | |
313 | =item $OFMT |
314 | |
315 | =item $# |
316 | |
317 | The output format for printed numbers. This variable is a half-hearted |
318 | attempt to emulate B<awk>'s OFMT variable. There are times, however, |
319 | when B<awk> and Perl have differing notions of what is in fact |
6e2995f4 |
320 | numeric. The initial value is %.I<n>g, where I<n> is the value |
321 | of the macro DBL_DIG from your system's F<float.h>. This is different from |
322 | B<awk>'s default OFMT setting of %.6g, so you need to set "C<$#>" |
323 | explicitly to get B<awk>'s value. (Mnemonic: # is the number sign.) |
a0d0e21e |
324 | |
5f05dabc |
325 | Use of "C<$#>" is deprecated. |
a0d0e21e |
326 | |
327 | =item format_page_number HANDLE EXPR |
328 | |
329 | =item $FORMAT_PAGE_NUMBER |
330 | |
331 | =item $% |
332 | |
333 | The current page number of the currently selected output channel. |
334 | (Mnemonic: % is page number in B<nroff>.) |
335 | |
336 | =item format_lines_per_page HANDLE EXPR |
337 | |
338 | =item $FORMAT_LINES_PER_PAGE |
339 | |
340 | =item $= |
341 | |
342 | The current page length (printable lines) of the currently selected |
343 | output channel. Default is 60. (Mnemonic: = has horizontal lines.) |
344 | |
345 | =item format_lines_left HANDLE EXPR |
346 | |
347 | =item $FORMAT_LINES_LEFT |
348 | |
349 | =item $- |
350 | |
351 | The number of lines left on the page of the currently selected output |
352 | channel. (Mnemonic: lines_on_page - lines_printed.) |
353 | |
354 | =item format_name HANDLE EXPR |
355 | |
356 | =item $FORMAT_NAME |
357 | |
358 | =item $~ |
359 | |
360 | The name of the current report format for the currently selected output |
361 | channel. Default is name of the filehandle. (Mnemonic: brother to |
362 | "C<$^>".) |
363 | |
364 | =item format_top_name HANDLE EXPR |
365 | |
366 | =item $FORMAT_TOP_NAME |
367 | |
368 | =item $^ |
369 | |
370 | The name of the current top-of-page format for the currently selected |
371 | output channel. Default is name of the filehandle with _TOP |
372 | appended. (Mnemonic: points to top of page.) |
373 | |
374 | =item format_line_break_characters HANDLE EXPR |
375 | |
376 | =item $FORMAT_LINE_BREAK_CHARACTERS |
377 | |
378 | =item $: |
379 | |
380 | The current set of characters after which a string may be broken to |
54310121 |
381 | fill continuation fields (starting with ^) in a format. Default is |
a0d0e21e |
382 | S<" \n-">, to break on whitespace or hyphens. (Mnemonic: a "colon" in |
383 | poetry is a part of a line.) |
384 | |
385 | =item format_formfeed HANDLE EXPR |
386 | |
387 | =item $FORMAT_FORMFEED |
388 | |
389 | =item $^L |
390 | |
5f05dabc |
391 | What formats output to perform a form feed. Default is \f. |
a0d0e21e |
392 | |
393 | =item $ACCUMULATOR |
394 | |
395 | =item $^A |
396 | |
397 | The current value of the write() accumulator for format() lines. A format |
398 | contains formline() commands that put their result into C<$^A>. After |
399 | calling its format, write() prints out the contents of C<$^A> and empties. |
400 | So you never actually see the contents of C<$^A> unless you call |
401 | formline() yourself and then look at it. See L<perlform> and |
402 | L<perlfunc/formline()>. |
403 | |
404 | =item $CHILD_ERROR |
405 | |
406 | =item $? |
407 | |
54310121 |
408 | The status returned by the last pipe close, backtick (C<``>) command, |
ff0cee69 |
409 | or system() operator. Note that this is the status word returned by |
410 | the wait() system call (or else is made up to look like it). Thus, |
411 | the exit value of the subprocess is actually (C<$? E<gt>E<gt> 8>), and |
412 | C<$? & 255> gives which signal, if any, the process died from, and |
413 | whether there was a core dump. (Mnemonic: similar to B<sh> and |
414 | B<ksh>.) |
a0d0e21e |
415 | |
aa689395 |
416 | Note that if you have installed a signal handler for C<SIGCHLD>, the |
417 | value of C<$?> will usually be wrong outside that handler. |
418 | |
a8f8344d |
419 | Inside an C<END> subroutine C<$?> contains the value that is going to be |
420 | given to C<exit()>. You can modify C<$?> in an C<END> subroutine to |
421 | change the exit status of the script. |
422 | |
aa689395 |
423 | Under VMS, the pragma C<use vmsish 'status'> makes C<$?> reflect the |
ff0cee69 |
424 | actual VMS exit status, instead of the default emulation of POSIX |
425 | status. |
f86702cc |
426 | |
a0d0e21e |
427 | =item $OS_ERROR |
428 | |
429 | =item $ERRNO |
430 | |
431 | =item $! |
432 | |
433 | If used in a numeric context, yields the current value of errno, with |
434 | all the usual caveats. (This means that you shouldn't depend on the |
22fae026 |
435 | value of C<$!> to be anything in particular unless you've gotten a |
a0d0e21e |
436 | specific error return indicating a system error.) If used in a string |
437 | context, yields the corresponding system error string. You can assign |
22fae026 |
438 | to C<$!> to set I<errno> if, for instance, you want C<"$!"> to return the |
a0d0e21e |
439 | string for error I<n>, or you want to set the exit value for the die() |
440 | operator. (Mnemonic: What just went bang?) |
441 | |
5c055ba3 |
442 | =item $EXTENDED_OS_ERROR |
443 | |
444 | =item $^E |
445 | |
22fae026 |
446 | Error information specific to the current operating system. At |
447 | the moment, this differs from C<$!> under only VMS, OS/2, and Win32 |
448 | (and for MacPerl). On all other platforms, C<$^E> is always just |
449 | the same as C<$!>. |
450 | |
451 | Under VMS, C<$^E> provides the VMS status value from the last |
452 | system error. This is more specific information about the last |
453 | system error than that provided by C<$!>. This is particularly |
d516a115 |
454 | important when C<$!> is set to B<EVMSERR>. |
22fae026 |
455 | |
1c1c7f20 |
456 | Under OS/2, C<$^E> is set to the error code of the last call to |
457 | OS/2 API either via CRT, or directly from perl. |
22fae026 |
458 | |
459 | Under Win32, C<$^E> always returns the last error information |
460 | reported by the Win32 call C<GetLastError()> which describes |
461 | the last error from within the Win32 API. Most Win32-specific |
462 | code will report errors via C<$^E>. ANSI C and UNIX-like calls |
463 | set C<errno> and so most portable Perl code will report errors |
464 | via C<$!>. |
465 | |
466 | Caveats mentioned in the description of C<$!> generally apply to |
467 | C<$^E>, also. (Mnemonic: Extra error explanation.) |
5c055ba3 |
468 | |
a0d0e21e |
469 | =item $EVAL_ERROR |
470 | |
471 | =item $@ |
472 | |
473 | The Perl syntax error message from the last eval() command. If null, the |
474 | last eval() parsed and executed correctly (although the operations you |
475 | invoked may have failed in the normal fashion). (Mnemonic: Where was |
476 | the syntax error "at"?) |
477 | |
748a9306 |
478 | Note that warning messages are not collected in this variable. You can, |
a8f8344d |
479 | however, set up a routine to process warnings by setting C<$SIG{__WARN__}> |
54310121 |
480 | as described below. |
748a9306 |
481 | |
a0d0e21e |
482 | =item $PROCESS_ID |
483 | |
484 | =item $PID |
485 | |
486 | =item $$ |
487 | |
488 | The process number of the Perl running this script. (Mnemonic: same |
489 | as shells.) |
490 | |
491 | =item $REAL_USER_ID |
492 | |
493 | =item $UID |
494 | |
495 | =item $< |
496 | |
497 | The real uid of this process. (Mnemonic: it's the uid you came I<FROM>, |
498 | if you're running setuid.) |
499 | |
500 | =item $EFFECTIVE_USER_ID |
501 | |
502 | =item $EUID |
503 | |
504 | =item $> |
505 | |
506 | The effective uid of this process. Example: |
507 | |
508 | $< = $>; # set real to effective uid |
509 | ($<,$>) = ($>,$<); # swap real and effective uid |
510 | |
8cc95fdb |
511 | (Mnemonic: it's the uid you went I<TO>, if you're running setuid.) |
512 | Note: "C<$E<lt>>" and "C<$E<gt>>" can be swapped only on machines |
513 | supporting setreuid(). |
a0d0e21e |
514 | |
515 | =item $REAL_GROUP_ID |
516 | |
517 | =item $GID |
518 | |
519 | =item $( |
520 | |
521 | The real gid of this process. If you are on a machine that supports |
522 | membership in multiple groups simultaneously, gives a space separated |
523 | list of groups you are in. The first number is the one returned by |
524 | getgid(), and the subsequent ones by getgroups(), one of which may be |
8cc95fdb |
525 | the same as the first number. |
526 | |
527 | However, a value assigned to "C<$(>" must be a single number used to |
528 | set the real gid. So the value given by "C<$(>" should I<not> be assigned |
529 | back to "C<$(>" without being forced numeric, such as by adding zero. |
530 | |
531 | (Mnemonic: parentheses are used to I<GROUP> things. The real gid is the |
532 | group you I<LEFT>, if you're running setgid.) |
a0d0e21e |
533 | |
534 | =item $EFFECTIVE_GROUP_ID |
535 | |
536 | =item $EGID |
537 | |
538 | =item $) |
539 | |
540 | The effective gid of this process. If you are on a machine that |
541 | supports membership in multiple groups simultaneously, gives a space |
542 | separated list of groups you are in. The first number is the one |
543 | returned by getegid(), and the subsequent ones by getgroups(), one of |
8cc95fdb |
544 | which may be the same as the first number. |
545 | |
546 | Similarly, a value assigned to "C<$)>" must also be a space-separated |
547 | list of numbers. The first number is used to set the effective gid, and |
548 | the rest (if any) are passed to setgroups(). To get the effect of an |
549 | empty list for setgroups(), just repeat the new effective gid; that is, |
550 | to force an effective gid of 5 and an effectively empty setgroups() |
551 | list, say C< $) = "5 5" >. |
552 | |
553 | (Mnemonic: parentheses are used to I<GROUP> things. The effective gid |
554 | is the group that's I<RIGHT> for you, if you're running setgid.) |
a0d0e21e |
555 | |
5f05dabc |
556 | Note: "C<$E<lt>>", "C<$E<gt>>", "C<$(>" and "C<$)>" can be set only on |
557 | machines that support the corresponding I<set[re][ug]id()> routine. "C<$(>" |
8cc95fdb |
558 | and "C<$)>" can be swapped only on machines supporting setregid(). |
a0d0e21e |
559 | |
560 | =item $PROGRAM_NAME |
561 | |
562 | =item $0 |
563 | |
564 | Contains the name of the file containing the Perl script being |
54310121 |
565 | executed. On some operating systems |
566 | assigning to "C<$0>" modifies the argument area that the ps(1) |
a0d0e21e |
567 | program sees. This is more useful as a way of indicating the |
568 | current program state than it is for hiding the program you're running. |
569 | (Mnemonic: same as B<sh> and B<ksh>.) |
570 | |
571 | =item $[ |
572 | |
573 | The index of the first element in an array, and of the first character |
574 | in a substring. Default is 0, but you could set it to 1 to make |
575 | Perl behave more like B<awk> (or Fortran) when subscripting and when |
576 | evaluating the index() and substr() functions. (Mnemonic: [ begins |
577 | subscripts.) |
578 | |
579 | As of Perl 5, assignment to "C<$[>" is treated as a compiler directive, |
580 | and cannot influence the behavior of any other file. Its use is |
581 | discouraged. |
582 | |
583 | =item $PERL_VERSION |
584 | |
585 | =item $] |
586 | |
54310121 |
587 | The version + patchlevel / 1000 of the Perl interpreter. This variable |
588 | can be used to determine whether the Perl interpreter executing a |
589 | script is in the right range of versions. (Mnemonic: Is this version |
590 | of perl in the right bracket?) Example: |
a0d0e21e |
591 | |
592 | warn "No checksumming!\n" if $] < 3.019; |
593 | |
54310121 |
594 | See also the documentation of C<use VERSION> and C<require VERSION> |
595 | for a convenient way to fail if the Perl interpreter is too old. |
a0d0e21e |
596 | |
597 | =item $DEBUGGING |
598 | |
599 | =item $^D |
600 | |
601 | The current value of the debugging flags. (Mnemonic: value of B<-D> |
602 | switch.) |
603 | |
604 | =item $SYSTEM_FD_MAX |
605 | |
606 | =item $^F |
607 | |
608 | The maximum system file descriptor, ordinarily 2. System file |
609 | descriptors are passed to exec()ed processes, while higher file |
610 | descriptors are not. Also, during an open(), system file descriptors are |
611 | preserved even if the open() fails. (Ordinary file descriptors are |
612 | closed before the open() is attempted.) Note that the close-on-exec |
613 | status of a file descriptor will be decided according to the value of |
614 | C<$^F> at the time of the open, not the time of the exec. |
615 | |
6e2995f4 |
616 | =item $^H |
617 | |
fb73857a |
618 | The current set of syntax checks enabled by C<use strict> and other block |
619 | scoped compiler hints. See the documentation of C<strict> for more details. |
6e2995f4 |
620 | |
a0d0e21e |
621 | =item $INPLACE_EDIT |
622 | |
623 | =item $^I |
624 | |
625 | The current value of the inplace-edit extension. Use C<undef> to disable |
626 | inplace editing. (Mnemonic: value of B<-i> switch.) |
627 | |
fb73857a |
628 | =item $^M |
629 | |
630 | By default, running out of memory it is not trappable. However, if |
631 | compiled for this, Perl may use the contents of C<$^M> as an emergency |
632 | pool after die()ing with this message. Suppose that your Perl were |
633 | compiled with -DPERL_EMERGENCY_SBRK and used Perl's malloc. Then |
634 | |
635 | $^M = 'a' x (1<<16); |
636 | |
637 | would allocate a 64K buffer for use when in emergency. See the F<INSTALL> |
638 | file for information on how to enable this option. As a disincentive to |
639 | casual use of this advanced feature, there is no L<English> long name for |
640 | this variable. |
641 | |
5c055ba3 |
642 | =item $OSNAME |
6e2995f4 |
643 | |
5c055ba3 |
644 | =item $^O |
645 | |
646 | The name of the operating system under which this copy of Perl was |
647 | built, as determined during the configuration process. The value |
648 | is identical to C<$Config{'osname'}>. |
649 | |
a0d0e21e |
650 | =item $PERLDB |
651 | |
652 | =item $^P |
653 | |
84902520 |
654 | The internal variable for debugging support. Different bits mean the |
655 | following (subject to change): |
656 | |
657 | =over 6 |
658 | |
659 | =item 0x01 |
660 | |
661 | Debug subroutine enter/exit. |
662 | |
663 | =item 0x02 |
664 | |
665 | Line-by-line debugging. |
666 | |
667 | =item 0x04 |
668 | |
669 | Switch off optimizations. |
670 | |
671 | =item 0x08 |
672 | |
673 | Preserve more data for future interactive inspections. |
674 | |
675 | =item 0x10 |
676 | |
677 | Keep info about source lines on which a subroutine is defined. |
678 | |
679 | =item 0x20 |
680 | |
681 | Start with single-step on. |
682 | |
683 | =back |
684 | |
685 | Note that some bits may be relevent at compile-time only, some at |
686 | run-time only. This is a new mechanism and the details may change. |
a0d0e21e |
687 | |
fb73857a |
688 | =item $^S |
689 | |
690 | Current state of the interpreter. Undefined if parsing of the current |
691 | module/eval is not finished (may happen in $SIG{__DIE__} and |
692 | $SIG{__WARN__} handlers). True if inside an eval, othewise false. |
693 | |
a0d0e21e |
694 | =item $BASETIME |
695 | |
696 | =item $^T |
697 | |
698 | The time at which the script began running, in seconds since the |
5f05dabc |
699 | epoch (beginning of 1970). The values returned by the B<-M>, B<-A>, |
a0d0e21e |
700 | and B<-C> filetests are |
701 | based on this value. |
702 | |
703 | =item $WARNING |
704 | |
705 | =item $^W |
706 | |
303f2f76 |
707 | The current value of the warning switch, either TRUE or FALSE. |
708 | (Mnemonic: related to the B<-w> switch.) |
a0d0e21e |
709 | |
710 | =item $EXECUTABLE_NAME |
711 | |
712 | =item $^X |
713 | |
714 | The name that the Perl binary itself was executed as, from C's C<argv[0]>. |
715 | |
716 | =item $ARGV |
717 | |
a8f8344d |
718 | contains the name of the current file when reading from E<lt>E<gt>. |
a0d0e21e |
719 | |
720 | =item @ARGV |
721 | |
722 | The array @ARGV contains the command line arguments intended for the |
723 | script. Note that C<$#ARGV> is the generally number of arguments minus |
5f05dabc |
724 | one, because C<$ARGV[0]> is the first argument, I<NOT> the command name. See |
a0d0e21e |
725 | "C<$0>" for the command name. |
726 | |
727 | =item @INC |
728 | |
729 | The array @INC contains the list of places to look for Perl scripts to |
730 | be evaluated by the C<do EXPR>, C<require>, or C<use> constructs. It |
731 | initially consists of the arguments to any B<-I> command line switches, |
6e2995f4 |
732 | followed by the default Perl library, probably F</usr/local/lib/perl>, |
cb1a09d0 |
733 | followed by ".", to represent the current directory. If you need to |
5f05dabc |
734 | modify this at runtime, you should use the C<use lib> pragma |
735 | to get the machine-dependent library properly loaded also: |
a0d0e21e |
736 | |
cb1a09d0 |
737 | use lib '/mypath/libdir/'; |
738 | use SomeMod; |
303f2f76 |
739 | |
fb73857a |
740 | =item @_ |
741 | |
742 | Within a subroutine the array @_ contains the parameters passed to that |
743 | subroutine. See L<perlsub>. |
744 | |
a0d0e21e |
745 | =item %INC |
746 | |
747 | The hash %INC contains entries for each filename that has |
748 | been included via C<do> or C<require>. The key is the filename you |
749 | specified, and the value is the location of the file actually found. |
750 | The C<require> command uses this array to determine whether a given file |
751 | has already been included. |
752 | |
fb73857a |
753 | =item %ENV $ENV{expr} |
a0d0e21e |
754 | |
755 | The hash %ENV contains your current environment. Setting a |
756 | value in C<ENV> changes the environment for child processes. |
757 | |
fb73857a |
758 | =item %SIG $SIG{expr} |
a0d0e21e |
759 | |
760 | The hash %SIG is used to set signal handlers for various |
761 | signals. Example: |
762 | |
763 | sub handler { # 1st argument is signal name |
fb73857a |
764 | my($sig) = @_; |
a0d0e21e |
765 | print "Caught a SIG$sig--shutting down\n"; |
766 | close(LOG); |
767 | exit(0); |
768 | } |
769 | |
fb73857a |
770 | $SIG{'INT'} = \&handler; |
771 | $SIG{'QUIT'} = \&handler; |
a0d0e21e |
772 | ... |
773 | $SIG{'INT'} = 'DEFAULT'; # restore default action |
774 | $SIG{'QUIT'} = 'IGNORE'; # ignore SIGQUIT |
775 | |
5f05dabc |
776 | The %SIG array contains values for only the signals actually set within |
a0d0e21e |
777 | the Perl script. Here are some other examples: |
778 | |
fb73857a |
779 | $SIG{"PIPE"} = Plumber; # SCARY!! |
780 | $SIG{"PIPE"} = "Plumber"; # assumes main::Plumber (not recommended) |
a0d0e21e |
781 | $SIG{"PIPE"} = \&Plumber; # just fine; assume current Plumber |
782 | $SIG{"PIPE"} = Plumber(); # oops, what did Plumber() return?? |
783 | |
784 | The one marked scary is problematic because it's a bareword, which means |
54310121 |
785 | sometimes it's a string representing the function, and sometimes it's |
a0d0e21e |
786 | going to call the subroutine call right then and there! Best to be sure |
a8f8344d |
787 | and quote it or take a reference to it. *Plumber works too. See L<perlsub>. |
748a9306 |
788 | |
44a8e56a |
789 | If your system has the sigaction() function then signal handlers are |
790 | installed using it. This means you get reliable signal handling. If |
791 | your system has the SA_RESTART flag it is used when signals handlers are |
792 | installed. This means that system calls for which it is supported |
793 | continue rather than returning when a signal arrives. If you want your |
794 | system calls to be interrupted by signal delivery then do something like |
795 | this: |
796 | |
797 | use POSIX ':signal_h'; |
798 | |
799 | my $alarm = 0; |
800 | sigaction SIGALRM, new POSIX::SigAction sub { $alarm = 1 } |
801 | or die "Error setting SIGALRM handler: $!\n"; |
802 | |
803 | See L<POSIX>. |
804 | |
748a9306 |
805 | Certain internal hooks can be also set using the %SIG hash. The |
a8f8344d |
806 | routine indicated by C<$SIG{__WARN__}> is called when a warning message is |
748a9306 |
807 | about to be printed. The warning message is passed as the first |
808 | argument. The presence of a __WARN__ hook causes the ordinary printing |
809 | of warnings to STDERR to be suppressed. You can use this to save warnings |
810 | in a variable, or turn warnings into fatal errors, like this: |
811 | |
812 | local $SIG{__WARN__} = sub { die $_[0] }; |
813 | eval $proggie; |
814 | |
a8f8344d |
815 | The routine indicated by C<$SIG{__DIE__}> is called when a fatal exception |
748a9306 |
816 | is about to be thrown. The error message is passed as the first |
817 | argument. When a __DIE__ hook routine returns, the exception |
818 | processing continues as it would have in the absence of the hook, |
cb1a09d0 |
819 | unless the hook routine itself exits via a C<goto>, a loop exit, or a die(). |
774d564b |
820 | The C<__DIE__> handler is explicitly disabled during the call, so that you |
fb73857a |
821 | can die from a C<__DIE__> handler. Similarly for C<__WARN__>. |
822 | |
823 | Note that the C<$SIG{__DIE__}> hook is called even inside eval()ed |
824 | blocks/strings. See L<perlfunc/die>, L<perlvar/$^S> for how to |
825 | circumvent this. |
826 | |
827 | Note that C<__DIE__>/C<__WARN__> handlers are very special in one |
828 | respect: they may be called to report (probable) errors found by the |
829 | parser. In such a case the parser may be in inconsistent state, so |
830 | any attempt to evaluate Perl code from such a handler will probably |
831 | result in a segfault. This means that calls which result/may-result |
832 | in parsing Perl should be used with extreme causion, like this: |
833 | |
834 | require Carp if defined $^S; |
835 | Carp::confess("Something wrong") if defined &Carp::confess; |
836 | die "Something wrong, but could not load Carp to give backtrace... |
837 | To see backtrace try starting Perl with -MCarp switch"; |
838 | |
839 | Here the first line will load Carp I<unless> it is the parser who |
840 | called the handler. The second line will print backtrace and die if |
841 | Carp was available. The third line will be executed only if Carp was |
842 | not available. |
843 | |
844 | See L<perlfunc/die>, L<perlfunc/warn> and L<perlfunc/eval> for |
845 | additional info. |
68dc0745 |
846 | |
a0d0e21e |
847 | =back |