Commit | Line | Data |
a0d0e21e |
1 | =head1 NAME |
2 | |
3 | perlrun - how to execute the Perl interpreter |
4 | |
5 | =head1 SYNOPSIS |
6 | |
672fde27 |
7 | B<perl> S<[ B<-sTtuUWX> ]> |
e0ebc809 |
8 | S<[ B<-hv> ] [ B<-V>[:I<configvar>] ]> |
9 | S<[ B<-cw> ] [ B<-d>[:I<debugger>] ] [ B<-D>[I<number/list>] ]> |
f2095865 |
10 | S<[ B<-pna> ] [ B<-F>I<pattern> ] [ B<-l>[I<octal>] ] [ B<-0>[I<octal/hexadecimal>] ]> |
e0ebc809 |
11 | S<[ B<-I>I<dir> ] [ B<-m>[B<->]I<module> ] [ B<-M>[B<->]I<'module...'> ]> |
12 | S<[ B<-P> ]> |
13 | S<[ B<-S> ]> |
14 | S<[ B<-x>[I<dir>] ]> |
15 | S<[ B<-i>[I<extension>] ]> |
16 | S<[ B<-e> I<'command'> ] [ B<--> ] [ I<programfile> ] [ I<argument> ]...> |
a05d7ebb |
17 | S<[ B<-C [I<number/list>] >]> ]> |
a0d0e21e |
18 | |
19 | =head1 DESCRIPTION |
20 | |
19799a22 |
21 | The normal way to run a Perl program is by making it directly |
22 | executable, or else by passing the name of the source file as an |
23 | argument on the command line. (An interactive Perl environment |
24 | is also possible--see L<perldebug> for details on how to do that.) |
25 | Upon startup, Perl looks for your program in one of the following |
a0d0e21e |
26 | places: |
27 | |
28 | =over 4 |
29 | |
30 | =item 1. |
31 | |
32 | Specified line by line via B<-e> switches on the command line. |
33 | |
34 | =item 2. |
35 | |
36 | Contained in the file specified by the first filename on the command line. |
a3cb178b |
37 | (Note that systems supporting the #! notation invoke interpreters this |
38 | way. See L<Location of Perl>.) |
a0d0e21e |
39 | |
40 | =item 3. |
41 | |
5f05dabc |
42 | Passed in implicitly via standard input. This works only if there are |
19799a22 |
43 | no filename arguments--to pass arguments to a STDIN-read program you |
44 | must explicitly specify a "-" for the program name. |
a0d0e21e |
45 | |
46 | =back |
47 | |
48 | With methods 2 and 3, Perl starts parsing the input file from the |
49 | beginning, unless you've specified a B<-x> switch, in which case it |
50 | scans for the first line starting with #! and containing the word |
19799a22 |
51 | "perl", and starts there instead. This is useful for running a program |
a0d0e21e |
52 | embedded in a larger message. (In this case you would indicate the end |
19799a22 |
53 | of the program using the C<__END__> token.) |
a0d0e21e |
54 | |
5f05dabc |
55 | The #! line is always examined for switches as the line is being |
56 | parsed. Thus, if you're on a machine that allows only one argument |
57 | with the #! line, or worse, doesn't even recognize the #! line, you |
58 | still can get consistent switch behavior regardless of how Perl was |
19799a22 |
59 | invoked, even if B<-x> was used to find the beginning of the program. |
60 | |
61 | Because historically some operating systems silently chopped off |
62 | kernel interpretation of the #! line after 32 characters, some |
63 | switches may be passed in on the command line, and some may not; |
64 | you could even get a "-" without its letter, if you're not careful. |
65 | You probably want to make sure that all your switches fall either |
66 | before or after that 32-character boundary. Most switches don't |
67 | actually care if they're processed redundantly, but getting a "-" |
68 | instead of a complete switch could cause Perl to try to execute |
69 | standard input instead of your program. And a partial B<-I> switch |
a0d0e21e |
70 | could also cause odd results. |
71 | |
19799a22 |
72 | Some switches do care if they are processed twice, for instance |
73 | combinations of B<-l> and B<-0>. Either put all the switches after |
74 | the 32-character boundary (if applicable), or replace the use of |
75 | B<-0>I<digits> by C<BEGIN{ $/ = "\0digits"; }>. |
fb73857a |
76 | |
a0d0e21e |
77 | Parsing of the #! switches starts wherever "perl" is mentioned in the line. |
78 | The sequences "-*" and "- " are specifically ignored so that you could, |
79 | if you were so inclined, say |
80 | |
81 | #!/bin/sh -- # -*- perl -*- -p |
19799a22 |
82 | eval 'exec perl -wS $0 ${1+"$@"}' |
5f05dabc |
83 | if $running_under_some_shell; |
a0d0e21e |
84 | |
44a4342c |
85 | to let Perl see the B<-p> switch. |
19799a22 |
86 | |
87 | A similar trick involves the B<env> program, if you have it. |
88 | |
89 | #!/usr/bin/env perl |
90 | |
91 | The examples above use a relative path to the perl interpreter, |
92 | getting whatever version is first in the user's path. If you want |
93 | a specific version of Perl, say, perl5.005_57, you should place |
94 | that directly in the #! line's path. |
a0d0e21e |
95 | |
96 | If the #! line does not contain the word "perl", the program named after |
97 | the #! is executed instead of the Perl interpreter. This is slightly |
98 | bizarre, but it helps people on machines that don't do #!, because they |
19799a22 |
99 | can tell a program that their SHELL is F</usr/bin/perl>, and Perl will then |
a0d0e21e |
100 | dispatch the program to the correct interpreter for them. |
101 | |
19799a22 |
102 | After locating your program, Perl compiles the entire program to an |
a0d0e21e |
103 | internal form. If there are any compilation errors, execution of the |
19799a22 |
104 | program is not attempted. (This is unlike the typical shell script, |
54310121 |
105 | which might run part-way through before finding a syntax error.) |
a0d0e21e |
106 | |
19799a22 |
107 | If the program is syntactically correct, it is executed. If the program |
a0d0e21e |
108 | runs off the end without hitting an exit() or die() operator, an implicit |
109 | C<exit(0)> is provided to indicate successful completion. |
110 | |
68dc0745 |
111 | =head2 #! and quoting on non-Unix systems |
112 | |
113 | Unix's #! technique can be simulated on other systems: |
114 | |
115 | =over 4 |
116 | |
117 | =item OS/2 |
118 | |
119 | Put |
120 | |
121 | extproc perl -S -your_switches |
122 | |
19799a22 |
123 | as the first line in C<*.cmd> file (B<-S> due to a bug in cmd.exe's |
68dc0745 |
124 | `extproc' handling). |
125 | |
54310121 |
126 | =item MS-DOS |
68dc0745 |
127 | |
19799a22 |
128 | Create a batch file to run your program, and codify it in |
68dc0745 |
129 | C<ALTERNATIVE_SHEBANG> (see the F<dosish.h> file in the source |
130 | distribution for more information). |
131 | |
132 | =item Win95/NT |
133 | |
6c6a61e2 |
134 | The Win95/NT installation, when using the ActiveState installer for Perl, |
c8db1d39 |
135 | will modify the Registry to associate the F<.pl> extension with the perl |
6c6a61e2 |
136 | interpreter. If you install Perl by other means (including building from |
137 | the sources), you may have to modify the Registry yourself. Note that |
138 | this means you can no longer tell the difference between an executable |
139 | Perl program and a Perl library file. |
68dc0745 |
140 | |
141 | =item Macintosh |
142 | |
19799a22 |
143 | A Macintosh perl program will have the appropriate Creator and |
68dc0745 |
144 | Type, so that double-clicking them will invoke the perl application. |
145 | |
bd3fa61c |
146 | =item VMS |
147 | |
148 | Put |
149 | |
150 | $ perl -mysw 'f$env("procedure")' 'p1' 'p2' 'p3' 'p4' 'p5' 'p6' 'p7' 'p8' ! |
151 | $ exit++ + ++$status != 0 and $exit = $status = undef; |
152 | |
19799a22 |
153 | at the top of your program, where B<-mysw> are any command line switches you |
154 | want to pass to Perl. You can now invoke the program directly, by saying |
155 | C<perl program>, or as a DCL procedure, by saying C<@program> (or implicitly |
156 | via F<DCL$PATH> by just using the name of the program). |
bd3fa61c |
157 | |
158 | This incantation is a bit much to remember, but Perl will display it for |
159 | you if you say C<perl "-V:startperl">. |
160 | |
68dc0745 |
161 | =back |
162 | |
163 | Command-interpreters on non-Unix systems have rather different ideas |
164 | on quoting than Unix shells. You'll need to learn the special |
165 | characters in your command-interpreter (C<*>, C<\> and C<"> are |
166 | common) and how to protect whitespace and these characters to run |
19799a22 |
167 | one-liners (see B<-e> below). |
68dc0745 |
168 | |
169 | On some systems, you may have to change single-quotes to double ones, |
e6f03d26 |
170 | which you must I<not> do on Unix or Plan 9 systems. You might also |
68dc0745 |
171 | have to change a single % to a %%. |
172 | |
173 | For example: |
174 | |
175 | # Unix |
176 | perl -e 'print "Hello world\n"' |
177 | |
54310121 |
178 | # MS-DOS, etc. |
68dc0745 |
179 | perl -e "print \"Hello world\n\"" |
180 | |
54310121 |
181 | # Macintosh |
68dc0745 |
182 | print "Hello world\n" |
183 | (then Run "Myscript" or Shift-Command-R) |
184 | |
185 | # VMS |
186 | perl -e "print ""Hello world\n""" |
187 | |
19799a22 |
188 | The problem is that none of this is reliable: it depends on the |
189 | command and it is entirely possible neither works. If B<4DOS> were |
190 | the command shell, this would probably work better: |
68dc0745 |
191 | |
192 | perl -e "print <Ctrl-x>"Hello world\n<Ctrl-x>"" |
193 | |
19799a22 |
194 | B<CMD.EXE> in Windows NT slipped a lot of standard Unix functionality in |
68dc0745 |
195 | when nobody was looking, but just try to find documentation for its |
196 | quoting rules. |
197 | |
54310121 |
198 | Under the Macintosh, it depends which environment you are using. The MacPerl |
68dc0745 |
199 | shell, or MPW, is much like Unix shells in its support for several |
54310121 |
200 | quoting variants, except that it makes free use of the Macintosh's non-ASCII |
68dc0745 |
201 | characters as control characters. |
202 | |
203 | There is no general solution to all of this. It's just a mess. |
204 | |
a3cb178b |
205 | =head2 Location of Perl |
206 | |
207 | It may seem obvious to say, but Perl is useful only when users can |
19799a22 |
208 | easily find it. When possible, it's good for both F</usr/bin/perl> |
209 | and F</usr/local/bin/perl> to be symlinks to the actual binary. If |
210 | that can't be done, system administrators are strongly encouraged |
211 | to put (symlinks to) perl and its accompanying utilities into a |
212 | directory typically found along a user's PATH, or in some other |
213 | obvious and convenient place. |
214 | |
215 | In this documentation, C<#!/usr/bin/perl> on the first line of the program |
216 | will stand in for whatever method works on your system. You are |
217 | advised to use a specific path if you care about a specific version. |
a3cb178b |
218 | |
19799a22 |
219 | #!/usr/local/bin/perl5.00554 |
a3cb178b |
220 | |
19799a22 |
221 | or if you just want to be running at least version, place a statement |
222 | like this at the top of your program: |
a0d0e21e |
223 | |
19799a22 |
224 | use 5.005_54; |
a0d0e21e |
225 | |
19799a22 |
226 | =head2 Command Switches |
227 | |
228 | As with all standard commands, a single-character switch may be |
229 | clustered with the following switch, if any. |
230 | |
231 | #!/usr/bin/perl -spi.orig # same as -s -p -i.orig |
a0d0e21e |
232 | |
233 | Switches include: |
234 | |
235 | =over 5 |
236 | |
f2095865 |
237 | =item B<-0>[I<octal/hexadecimal>] |
a0d0e21e |
238 | |
f2095865 |
239 | specifies the input record separator (C<$/>) as an octal or |
240 | hexadecimal number. If there are no digits, the null character is the |
241 | separator. Other switches may precede or follow the digits. For |
242 | example, if you have a version of B<find> which can print filenames |
243 | terminated by the null character, you can say this: |
a0d0e21e |
244 | |
19799a22 |
245 | find . -name '*.orig' -print0 | perl -n0e unlink |
a0d0e21e |
246 | |
247 | The special value 00 will cause Perl to slurp files in paragraph mode. |
5f05dabc |
248 | The value 0777 will cause Perl to slurp files whole because there is no |
f2095865 |
249 | legal byte with that value. |
250 | |
251 | If you want to specify any Unicode character, use the hexadecimal |
252 | format: C<-0xHHH...>, where the C<H> are valid hexadecimal digits. |
253 | (This means that you cannot use the C<-x> with a directory name that |
254 | consists of hexadecimal digits.) |
a0d0e21e |
255 | |
256 | =item B<-a> |
257 | |
258 | turns on autosplit mode when used with a B<-n> or B<-p>. An implicit |
259 | split command to the @F array is done as the first thing inside the |
260 | implicit while loop produced by the B<-n> or B<-p>. |
261 | |
262 | perl -ane 'print pop(@F), "\n";' |
263 | |
264 | is equivalent to |
265 | |
266 | while (<>) { |
267 | @F = split(' '); |
268 | print pop(@F), "\n"; |
269 | } |
270 | |
271 | An alternate delimiter may be specified using B<-F>. |
272 | |
a05d7ebb |
273 | =item B<-C [I<number/list>]> |
46487f74 |
274 | |
a05d7ebb |
275 | The C<-C> flag controls some Unicode of the Perl Unicode features. |
276 | |
277 | As of 5.8.1, the C<-C> can be followed either by a number or a list |
f3f8427d |
278 | of option letters. The letters, their numeric values, and effects |
8aa8f774 |
279 | are as follows; listing the letters is equal to summing the numbers. |
9f21530f |
280 | |
281 | I 1 STDIN is assumed to be in UTF-8 |
282 | O 2 STDOUT will be in UTF-8 |
283 | E 4 STDERR will be in UTF-8 |
284 | S 7 I + O + E |
44505768 |
285 | i 8 UTF-8 is the default PerlIO layer for input streams |
286 | o 16 UTF-8 is the default PerlIO layer for output streams |
9f21530f |
287 | D 24 i + o |
44505768 |
288 | A 32 the @ARGV elements are expected to be strings encoded in UTF-8 |
ce81ff12 |
289 | L 64 normally the "IOEioA" are unconditional, |
9f21530f |
290 | the L makes them conditional on the locale environment |
ce81ff12 |
291 | variables (the LC_ALL, LC_TYPE, and LANG, in the order |
292 | of decreasing precedence) -- if the variables indicate |
293 | UTF-8, then the selected "IOEioA" are in effect |
9f21530f |
294 | |
295 | For example, C<-COE> and C<-C6> will both turn on UTF-8-ness on both |
296 | STDOUT and STDERR. Repeating letters is just redundant, not cumulative |
297 | nor toggling. |
a05d7ebb |
298 | |
44505768 |
299 | The C<io> options mean that any subsequent open() (or similar I/O |
300 | operations) will have the C<:utf8> PerlIO layer implicitly applied |
301 | to them, in other words, UTF-8 is expected from any input stream, |
302 | and UTF-8 is produced to any output stream. This is just the default, |
303 | with explicit layers in open() and with binmode() one can manipulate |
304 | streams as usual. |
305 | |
8aa8f774 |
306 | C<-C> on its own (not followed by any number or option list), or the |
307 | empty string C<""> for the C<$ENV{PERL_UNICODE}, has the same effect |
ce81ff12 |
308 | as <-CSDL>. In other words, the standard I/O handles and the default |
309 | C<open()> layer are UTF-8-fied B<but> only if the locale environment |
8aa8f774 |
310 | variables indicate a UTF-8 locale. This behaviour follows the |
5b4f334e |
311 | I<implicit> (and problematic) UTF-8 behaviour of Perl 5.8.0. |
a05d7ebb |
312 | |
ab9e1bb7 |
313 | You can use C<-C0> (or C<"0"> for $ENV{PERL_UNICODE}) to explicitly |
5b4f334e |
314 | disable all the above Unicode features. |
fde18df1 |
315 | |
8aa8f774 |
316 | The read-only magic variable C<${^UNICODE}> reflects the numeric value |
ab9e1bb7 |
317 | of this setting. This is variable is set during Perl startup and is |
318 | thereafter read-only. If you want runtime effects, use the three-arg |
2307c6d0 |
319 | open() (see L<perlfunc/open>), the two-arg binmode() (see L<perlfunc/binmode>), |
ab9e1bb7 |
320 | and the C<open> pragma (see L<open>). |
fde18df1 |
321 | |
322 | (In Perls earlier than 5.8.1 the C<-C> switch was a Win32-only switch |
323 | that enabled the use of Unicode-aware "wide system call" Win32 APIs. |
324 | This feature was practically unused, however, and the command line |
325 | switch was therefore "recycled".) |
46487f74 |
326 | |
a0d0e21e |
327 | =item B<-c> |
328 | |
19799a22 |
329 | causes Perl to check the syntax of the program and then exit without |
7d30b5c4 |
330 | executing it. Actually, it I<will> execute C<BEGIN>, C<CHECK>, and |
4f25aa18 |
331 | C<use> blocks, because these are considered as occurring outside the |
332 | execution of your program. C<INIT> and C<END> blocks, however, will |
333 | be skipped. |
a0d0e21e |
334 | |
335 | =item B<-d> |
336 | |
19799a22 |
337 | runs the program under the Perl debugger. See L<perldebug>. |
a0d0e21e |
338 | |
70c94a19 |
339 | =item B<-d:>I<foo[=bar,baz]> |
3c81428c |
340 | |
19799a22 |
341 | runs the program under the control of a debugging, profiling, or |
342 | tracing module installed as Devel::foo. E.g., B<-d:DProf> executes |
70c94a19 |
343 | the program using the Devel::DProf profiler. As with the B<-M> |
344 | flag, options may be passed to the Devel::foo package where they |
345 | will be received and interpreted by the Devel::foo::import routine. |
346 | The comma-separated list of options must follow a C<=> character. |
347 | See L<perldebug>. |
3c81428c |
348 | |
db2ba183 |
349 | =item B<-D>I<letters> |
a0d0e21e |
350 | |
db2ba183 |
351 | =item B<-D>I<number> |
a0d0e21e |
352 | |
19799a22 |
353 | sets debugging flags. To watch how it executes your program, use |
db2ba183 |
354 | B<-Dtls>. (This works only if debugging is compiled into your |
355 | Perl.) Another nice value is B<-Dx>, which lists your compiled |
4197b13f |
356 | syntax tree. And B<-Dr> displays compiled regular expressions; |
44a4342c |
357 | the format of the output is explained in L<perldebguts>. |
4197b13f |
358 | |
359 | As an alternative, specify a number instead of list of letters (e.g., |
360 | B<-D14> is equivalent to B<-Dtls>): |
a0d0e21e |
361 | |
db2ba183 |
362 | 1 p Tokenizing and parsing |
363 | 2 s Stack snapshots |
d6721266 |
364 | with v, displays all stacks |
db2ba183 |
365 | 4 l Context (loop) stack processing |
366 | 8 t Trace execution |
367 | 16 o Method and overloading resolution |
368 | 32 c String/numeric conversions |
1045810a |
369 | 64 P Print profiling info, preprocessor command for -P, source file input state |
db2ba183 |
370 | 128 m Memory allocation |
371 | 256 f Format processing |
372 | 512 r Regular expression parsing and execution |
373 | 1024 x Syntax tree dump |
374 | 2048 u Tainting checks |
7bab3ede |
375 | 4096 (Obsolete, previously used for LEAKTEST) |
db2ba183 |
376 | 8192 H Hash dump -- usurps values() |
377 | 16384 X Scratchpad allocation |
378 | 32768 D Cleaning up |
8b73bbec |
379 | 65536 S Thread synchronization |
607df283 |
380 | 131072 T Tokenising |
04932ac8 |
381 | 262144 R Include reference counts of dumped variables (eg when using -Ds) |
1045810a |
382 | 524288 J Do not s,t,P-debug (Jump over) opcodes within package DB |
d6721266 |
383 | 1048576 v Verbose: use in conjunction with other flags |
46187eeb |
384 | 2097152 C Copy On Write |
a0d0e21e |
385 | |
19799a22 |
386 | All these flags require B<-DDEBUGGING> when you compile the Perl |
1045810a |
387 | executable (but see L<Devel::Peek>, L<re> which may change this). |
44a4342c |
388 | See the F<INSTALL> file in the Perl source distribution |
19799a22 |
389 | for how to do this. This flag is automatically set if you include B<-g> |
8c52afec |
390 | option when C<Configure> asks you about optimizer/debugger flags. |
391 | |
19799a22 |
392 | If you're just trying to get a print out of each line of Perl code |
393 | as it executes, the way that C<sh -x> provides for shell scripts, |
44a4342c |
394 | you can't use Perl's B<-D> switch. Instead do this |
19799a22 |
395 | |
c406981e |
396 | # If you have "env" utility |
397 | env=PERLDB_OPTS="NonStop=1 AutoTrace=1 frame=2" perl -dS program |
398 | |
19799a22 |
399 | # Bourne shell syntax |
400 | $ PERLDB_OPTS="NonStop=1 AutoTrace=1 frame=2" perl -dS program |
401 | |
402 | # csh syntax |
403 | % (setenv PERLDB_OPTS "NonStop=1 AutoTrace=1 frame=2"; perl -dS program) |
404 | |
405 | See L<perldebug> for details and variations. |
406 | |
a0d0e21e |
407 | =item B<-e> I<commandline> |
408 | |
19799a22 |
409 | may be used to enter one line of program. If B<-e> is given, Perl |
410 | will not look for a filename in the argument list. Multiple B<-e> |
411 | commands may be given to build up a multi-line script. Make sure |
412 | to use semicolons where you would in a normal program. |
a0d0e21e |
413 | |
e0ebc809 |
414 | =item B<-F>I<pattern> |
a0d0e21e |
415 | |
e0ebc809 |
416 | specifies the pattern to split on if B<-a> is also in effect. The |
5f05dabc |
417 | pattern may be surrounded by C<//>, C<"">, or C<''>, otherwise it will be |
e0ebc809 |
418 | put in single quotes. |
a0d0e21e |
419 | |
e0ebc809 |
420 | =item B<-h> |
421 | |
422 | prints a summary of the options. |
423 | |
424 | =item B<-i>[I<extension>] |
a0d0e21e |
425 | |
2d259d92 |
426 | specifies that files processed by the C<E<lt>E<gt>> construct are to be |
427 | edited in-place. It does this by renaming the input file, opening the |
428 | output file by the original name, and selecting that output file as the |
429 | default for print() statements. The extension, if supplied, is used to |
430 | modify the name of the old file to make a backup copy, following these |
431 | rules: |
432 | |
433 | If no extension is supplied, no backup is made and the current file is |
434 | overwritten. |
435 | |
19799a22 |
436 | If the extension doesn't contain a C<*>, then it is appended to the |
437 | end of the current filename as a suffix. If the extension does |
438 | contain one or more C<*> characters, then each C<*> is replaced |
439 | with the current filename. In Perl terms, you could think of this |
440 | as: |
2d259d92 |
441 | |
66606d78 |
442 | ($backup = $extension) =~ s/\*/$file_name/g; |
2d259d92 |
443 | |
444 | This allows you to add a prefix to the backup file, instead of (or in |
445 | addition to) a suffix: |
446 | |
19799a22 |
447 | $ perl -pi 'orig_*' -e 's/bar/baz/' fileA # backup to 'orig_fileA' |
2d259d92 |
448 | |
449 | Or even to place backup copies of the original files into another |
450 | directory (provided the directory already exists): |
451 | |
19799a22 |
452 | $ perl -pi 'old/*.orig' -e 's/bar/baz/' fileA # backup to 'old/fileA.orig' |
2d259d92 |
453 | |
66606d78 |
454 | These sets of one-liners are equivalent: |
455 | |
456 | $ perl -pi -e 's/bar/baz/' fileA # overwrite current file |
19799a22 |
457 | $ perl -pi '*' -e 's/bar/baz/' fileA # overwrite current file |
66606d78 |
458 | |
19799a22 |
459 | $ perl -pi '.orig' -e 's/bar/baz/' fileA # backup to 'fileA.orig' |
460 | $ perl -pi '*.orig' -e 's/bar/baz/' fileA # backup to 'fileA.orig' |
66606d78 |
461 | |
2d259d92 |
462 | From the shell, saying |
a0d0e21e |
463 | |
19799a22 |
464 | $ perl -p -i.orig -e "s/foo/bar/; ... " |
a0d0e21e |
465 | |
19799a22 |
466 | is the same as using the program: |
a0d0e21e |
467 | |
19799a22 |
468 | #!/usr/bin/perl -pi.orig |
a0d0e21e |
469 | s/foo/bar/; |
470 | |
471 | which is equivalent to |
472 | |
473 | #!/usr/bin/perl |
19799a22 |
474 | $extension = '.orig'; |
475 | LINE: while (<>) { |
a0d0e21e |
476 | if ($ARGV ne $oldargv) { |
66606d78 |
477 | if ($extension !~ /\*/) { |
478 | $backup = $ARGV . $extension; |
479 | } |
480 | else { |
481 | ($backup = $extension) =~ s/\*/$ARGV/g; |
482 | } |
483 | rename($ARGV, $backup); |
a0d0e21e |
484 | open(ARGVOUT, ">$ARGV"); |
485 | select(ARGVOUT); |
486 | $oldargv = $ARGV; |
487 | } |
488 | s/foo/bar/; |
489 | } |
490 | continue { |
491 | print; # this prints to original filename |
492 | } |
493 | select(STDOUT); |
494 | |
495 | except that the B<-i> form doesn't need to compare $ARGV to $oldargv to |
496 | know when the filename has changed. It does, however, use ARGVOUT for |
66606d78 |
497 | the selected filehandle. Note that STDOUT is restored as the default |
498 | output filehandle after the loop. |
499 | |
500 | As shown above, Perl creates the backup file whether or not any output |
501 | is actually changed. So this is just a fancy way to copy files: |
502 | |
cd2d1bac |
503 | $ perl -p -i'/some/file/path/*' -e 1 file1 file2 file3... |
19799a22 |
504 | or |
cd2d1bac |
505 | $ perl -p -i'.orig' -e 1 file1 file2 file3... |
66606d78 |
506 | |
507 | You can use C<eof> without parentheses to locate the end of each input |
508 | file, in case you want to append to each file, or reset line numbering |
509 | (see example in L<perlfunc/eof>). |
510 | |
511 | If, for a given file, Perl is unable to create the backup file as |
512 | specified in the extension then it will skip that file and continue on |
513 | with the next one (if it exists). |
514 | |
19799a22 |
515 | For a discussion of issues surrounding file permissions and B<-i>, |
cea6626f |
516 | see L<perlfaq5/Why does Perl let me delete read-only files? Why does -i clobber protected files? Isn't this a bug in Perl?>. |
66606d78 |
517 | |
518 | You cannot use B<-i> to create directories or to strip extensions from |
519 | files. |
a0d0e21e |
520 | |
19799a22 |
521 | Perl does not expand C<~> in filenames, which is good, since some |
522 | folks use it for their backup files: |
a0d0e21e |
523 | |
19799a22 |
524 | $ perl -pi~ -e 's/foo/bar/' file1 file2 file3... |
525 | |
526 | Finally, the B<-i> switch does not impede execution when no |
a2008d6d |
527 | files are given on the command line. In this case, no backup is made |
528 | (the original file cannot, of course, be determined) and processing |
529 | proceeds from STDIN to STDOUT as might be expected. |
530 | |
a0d0e21e |
531 | =item B<-I>I<directory> |
532 | |
e0ebc809 |
533 | Directories specified by B<-I> are prepended to the search path for |
1fef88e7 |
534 | modules (C<@INC>), and also tells the C preprocessor where to search for |
e0ebc809 |
535 | include files. The C preprocessor is invoked with B<-P>; by default it |
536 | searches /usr/include and /usr/lib/perl. |
a0d0e21e |
537 | |
e0ebc809 |
538 | =item B<-l>[I<octnum>] |
a0d0e21e |
539 | |
19799a22 |
540 | enables automatic line-ending processing. It has two separate |
541 | effects. First, it automatically chomps C<$/> (the input record |
542 | separator) when used with B<-n> or B<-p>. Second, it assigns C<$\> |
543 | (the output record separator) to have the value of I<octnum> so |
544 | that any print statements will have that separator added back on. |
545 | If I<octnum> is omitted, sets C<$\> to the current value of |
546 | C<$/>. For instance, to trim lines to 80 columns: |
a0d0e21e |
547 | |
548 | perl -lpe 'substr($_, 80) = ""' |
549 | |
550 | Note that the assignment C<$\ = $/> is done when the switch is processed, |
551 | so the input record separator can be different than the output record |
552 | separator if the B<-l> switch is followed by a B<-0> switch: |
553 | |
554 | gnufind / -print0 | perl -ln0e 'print "found $_" if -p' |
555 | |
1fef88e7 |
556 | This sets C<$\> to newline and then sets C<$/> to the null character. |
a0d0e21e |
557 | |
e0ebc809 |
558 | =item B<-m>[B<->]I<module> |
559 | |
560 | =item B<-M>[B<->]I<module> |
c07a80fd |
561 | |
e0ebc809 |
562 | =item B<-M>[B<->]I<'module ...'> |
563 | |
564 | =item B<-[mM]>[B<->]I<module=arg[,arg]...> |
3c81428c |
565 | |
19799a22 |
566 | B<-m>I<module> executes C<use> I<module> C<();> before executing your |
567 | program. |
3c81428c |
568 | |
19799a22 |
569 | B<-M>I<module> executes C<use> I<module> C<;> before executing your |
570 | program. You can use quotes to add extra code after the module name, |
571 | e.g., C<'-Mmodule qw(foo bar)'>. |
3c81428c |
572 | |
19799a22 |
573 | If the first character after the B<-M> or B<-m> is a dash (C<->) |
a5f75d66 |
574 | then the 'use' is replaced with 'no'. |
575 | |
54310121 |
576 | A little builtin syntactic sugar means you can also say |
19799a22 |
577 | B<-mmodule=foo,bar> or B<-Mmodule=foo,bar> as a shortcut for |
578 | C<'-Mmodule qw(foo bar)'>. This avoids the need to use quotes when |
579 | importing symbols. The actual code generated by B<-Mmodule=foo,bar> is |
e0ebc809 |
580 | C<use module split(/,/,q{foo,bar})>. Note that the C<=> form |
19799a22 |
581 | removes the distinction between B<-m> and B<-M>. |
3c81428c |
582 | |
a0d0e21e |
583 | =item B<-n> |
584 | |
19799a22 |
585 | causes Perl to assume the following loop around your program, which |
a0d0e21e |
586 | makes it iterate over filename arguments somewhat like B<sed -n> or |
587 | B<awk>: |
588 | |
19799a22 |
589 | LINE: |
a0d0e21e |
590 | while (<>) { |
19799a22 |
591 | ... # your program goes here |
a0d0e21e |
592 | } |
593 | |
594 | Note that the lines are not printed by default. See B<-p> to have |
08e9d68e |
595 | lines printed. If a file named by an argument cannot be opened for |
19799a22 |
596 | some reason, Perl warns you about it and moves on to the next file. |
08e9d68e |
597 | |
598 | Here is an efficient way to delete all files older than a week: |
a0d0e21e |
599 | |
19799a22 |
600 | find . -mtime +7 -print | perl -nle unlink |
a0d0e21e |
601 | |
19799a22 |
602 | This is faster than using the B<-exec> switch of B<find> because you don't |
603 | have to start a process on every filename found. It does suffer from |
604 | the bug of mishandling newlines in pathnames, which you can fix if |
44a4342c |
605 | you follow the example under B<-0>. |
a0d0e21e |
606 | |
607 | C<BEGIN> and C<END> blocks may be used to capture control before or after |
19799a22 |
608 | the implicit program loop, just as in B<awk>. |
a0d0e21e |
609 | |
610 | =item B<-p> |
611 | |
19799a22 |
612 | causes Perl to assume the following loop around your program, which |
a0d0e21e |
613 | makes it iterate over filename arguments somewhat like B<sed>: |
614 | |
615 | |
19799a22 |
616 | LINE: |
a0d0e21e |
617 | while (<>) { |
19799a22 |
618 | ... # your program goes here |
a0d0e21e |
619 | } continue { |
08e9d68e |
620 | print or die "-p destination: $!\n"; |
a0d0e21e |
621 | } |
622 | |
08e9d68e |
623 | If a file named by an argument cannot be opened for some reason, Perl |
624 | warns you about it, and moves on to the next file. Note that the |
c2611fb3 |
625 | lines are printed automatically. An error occurring during printing is |
08e9d68e |
626 | treated as fatal. To suppress printing use the B<-n> switch. A B<-p> |
627 | overrides a B<-n> switch. |
a0d0e21e |
628 | |
629 | C<BEGIN> and C<END> blocks may be used to capture control before or after |
19799a22 |
630 | the implicit loop, just as in B<awk>. |
a0d0e21e |
631 | |
632 | =item B<-P> |
633 | |
079a94c4 |
634 | B<NOTE: Use of -P is strongly discouraged because of its inherent |
635 | problems, including poor portability.> |
636 | |
637 | This option causes your program to be run through the C preprocessor before |
efdf3af0 |
638 | compilation by Perl. Because both comments and B<cpp> directives begin |
a0d0e21e |
639 | with the # character, you should avoid starting comments with any words |
efdf3af0 |
640 | recognized by the C preprocessor such as C<"if">, C<"else">, or C<"define">. |
079a94c4 |
641 | |
642 | If you're considering using C<-P>, you might also want to look at the |
643 | Filter::cpp module from CPAN. |
644 | |
645 | The problems of -P include, but are not limited to: |
646 | |
647 | =over 10 |
648 | |
649 | =item * |
650 | |
651 | The C<#!> line is stripped, so any switches there don't apply. |
652 | |
653 | =item * |
654 | |
655 | A C<-P> on a C<#!> line doesn't work. |
656 | |
657 | =item * |
658 | |
659 | B<All> lines that begin with (whitespace and) a C<#> but |
660 | do not look like cpp commands, are stripped, including anything |
44a4342c |
661 | inside Perl strings, regular expressions, and here-docs . |
079a94c4 |
662 | |
663 | =item * |
664 | |
665 | In some platforms the C preprocessor knows too much: it knows about |
666 | the C++ -style until-end-of-line comments starting with C<"//">. |
efdf3af0 |
667 | This will cause problems with common Perl constructs like |
668 | |
669 | s/foo//; |
670 | |
671 | because after -P this will became illegal code |
672 | |
673 | s/foo |
674 | |
675 | The workaround is to use some other quoting separator than C<"/">, |
676 | like for example C<"!">: |
677 | |
678 | s!foo!!; |
a0d0e21e |
679 | |
079a94c4 |
680 | |
681 | |
682 | =item * |
683 | |
684 | It requires not only a working C preprocessor but also a working |
685 | F<sed>. If not on UNIX, you are probably out of luck on this. |
686 | |
687 | =item * |
688 | |
689 | Script line numbers are not preserved. |
690 | |
691 | =item * |
692 | |
693 | The C<-x> does not work with C<-P>. |
694 | |
695 | =back |
9a1f07e7 |
696 | |
a0d0e21e |
697 | =item B<-s> |
698 | |
19799a22 |
699 | enables rudimentary switch parsing for switches on the command |
700 | line after the program name but before any filename arguments (or before |
3bbcc830 |
701 | an argument of B<-->). This means you can have switches with two leading |
702 | dashes (B<--help>). Any switch found there is removed from @ARGV and sets the |
19799a22 |
703 | corresponding variable in the Perl program. The following program |
3c0facb2 |
704 | prints "1" if the program is invoked with a B<-xyz> switch, and "abc" |
705 | if it is invoked with B<-xyz=abc>. |
a0d0e21e |
706 | |
707 | #!/usr/bin/perl -s |
3c0facb2 |
708 | if ($xyz) { print "$xyz\n" } |
a0d0e21e |
709 | |
3bbcc830 |
710 | Do note that B<--help> creates the variable ${-help}, which is not compliant |
711 | with C<strict refs>. |
712 | |
a0d0e21e |
713 | =item B<-S> |
714 | |
715 | makes Perl use the PATH environment variable to search for the |
19799a22 |
716 | program (unless the name of the program contains directory separators). |
717 | |
2a92aaa0 |
718 | On some platforms, this also makes Perl append suffixes to the |
719 | filename while searching for it. For example, on Win32 platforms, |
720 | the ".bat" and ".cmd" suffixes are appended if a lookup for the |
721 | original name fails, and if the name does not already end in one |
722 | of those suffixes. If your Perl was compiled with DEBUGGING turned |
723 | on, using the -Dp switch to Perl shows how the search progresses. |
724 | |
2a92aaa0 |
725 | Typically this is used to emulate #! startup on platforms that |
726 | don't support #!. This example works on many platforms that |
727 | have a shell compatible with Bourne shell: |
a0d0e21e |
728 | |
729 | #!/usr/bin/perl |
a3cb178b |
730 | eval 'exec /usr/bin/perl -wS $0 ${1+"$@"}' |
a0d0e21e |
731 | if $running_under_some_shell; |
732 | |
19799a22 |
733 | The system ignores the first line and feeds the program to F</bin/sh>, |
734 | which proceeds to try to execute the Perl program as a shell script. |
a0d0e21e |
735 | The shell executes the second line as a normal shell command, and thus |
736 | starts up the Perl interpreter. On some systems $0 doesn't always |
737 | contain the full pathname, so the B<-S> tells Perl to search for the |
19799a22 |
738 | program if necessary. After Perl locates the program, it parses the |
a0d0e21e |
739 | lines and ignores them because the variable $running_under_some_shell |
19799a22 |
740 | is never true. If the program will be interpreted by csh, you will need |
a3cb178b |
741 | to replace C<${1+"$@"}> with C<$*>, even though that doesn't understand |
742 | embedded spaces (and such) in the argument list. To start up sh rather |
a0d0e21e |
743 | than csh, some systems may have to replace the #! line with a line |
744 | containing just a colon, which will be politely ignored by Perl. Other |
745 | systems can't control that, and need a totally devious construct that |
19799a22 |
746 | will work under any of B<csh>, B<sh>, or Perl, such as the following: |
a0d0e21e |
747 | |
19799a22 |
748 | eval '(exit $?0)' && eval 'exec perl -wS $0 ${1+"$@"}' |
a3cb178b |
749 | & eval 'exec /usr/bin/perl -wS $0 $argv:q' |
5f05dabc |
750 | if $running_under_some_shell; |
a0d0e21e |
751 | |
19799a22 |
752 | If the filename supplied contains directory separators (i.e., is an |
753 | absolute or relative pathname), and if that file is not found, |
754 | platforms that append file extensions will do so and try to look |
755 | for the file with those extensions added, one by one. |
756 | |
757 | On DOS-like platforms, if the program does not contain directory |
758 | separators, it will first be searched for in the current directory |
759 | before being searched for on the PATH. On Unix platforms, the |
760 | program will be searched for strictly on the PATH. |
761 | |
6537fe72 |
762 | =item B<-t> |
763 | |
764 | Like B<-T>, but taint checks will issue warnings rather than fatal |
317ea90d |
765 | errors. These warnings can be controlled normally with C<no warnings |
766 | qw(taint)>. |
1dbad523 |
767 | |
768 | B<NOTE: this is not a substitute for -T.> This is meant only to be |
769 | used as a temporary development aid while securing legacy code: |
770 | for real production code and for new secure code written from scratch |
771 | always use the real B<-T>. |
6537fe72 |
772 | |
a0d0e21e |
773 | =item B<-T> |
774 | |
a3cb178b |
775 | forces "taint" checks to be turned on so you can test them. Ordinarily |
19799a22 |
776 | these checks are done only when running setuid or setgid. It's a |
777 | good idea to turn them on explicitly for programs that run on behalf |
778 | of someone else whom you might not necessarily trust, such as CGI |
779 | programs or any internet servers you might write in Perl. See |
780 | L<perlsec> for details. For security reasons, this option must be |
781 | seen by Perl quite early; usually this means it must appear early |
782 | on the command line or in the #! line for systems which support |
783 | that construct. |
a0d0e21e |
784 | |
785 | =item B<-u> |
786 | |
19799a22 |
787 | This obsolete switch causes Perl to dump core after compiling your |
788 | program. You can then in theory take this core dump and turn it |
789 | into an executable file by using the B<undump> program (not supplied). |
790 | This speeds startup at the expense of some disk space (which you |
791 | can minimize by stripping the executable). (Still, a "hello world" |
792 | executable comes out to about 200K on my machine.) If you want to |
793 | execute a portion of your program before dumping, use the dump() |
794 | operator instead. Note: availability of B<undump> is platform |
795 | specific and may not be available for a specific port of Perl. |
796 | |
797 | This switch has been superseded in favor of the new Perl code |
798 | generator backends to the compiler. See L<B> and L<B::Bytecode> |
799 | for details. |
a0d0e21e |
800 | |
801 | =item B<-U> |
802 | |
803 | allows Perl to do unsafe operations. Currently the only "unsafe" |
804 | operations are the unlinking of directories while running as superuser, |
805 | and running setuid programs with fatal taint checks turned into |
19799a22 |
806 | warnings. Note that the B<-w> switch (or the C<$^W> variable) must |
807 | be used along with this option to actually I<generate> the |
fb73857a |
808 | taint-check warnings. |
a0d0e21e |
809 | |
810 | =item B<-v> |
811 | |
19799a22 |
812 | prints the version and patchlevel of your perl executable. |
a0d0e21e |
813 | |
3c81428c |
814 | =item B<-V> |
815 | |
816 | prints summary of the major perl configuration values and the current |
19799a22 |
817 | values of @INC. |
3c81428c |
818 | |
e0ebc809 |
819 | =item B<-V:>I<name> |
3c81428c |
820 | |
821 | Prints to STDOUT the value of the named configuration variable. |
44a4342c |
822 | For example, |
3c81428c |
823 | |
19799a22 |
824 | $ perl -V:man.dir |
825 | |
826 | will provide strong clues about what your MANPATH variable should |
827 | be set to in order to access the Perl documentation. |
a0d0e21e |
828 | |
19799a22 |
829 | =item B<-w> |
774d564b |
830 | |
19799a22 |
831 | prints warnings about dubious constructs, such as variable names |
832 | that are mentioned only once and scalar variables that are used |
833 | before being set, redefined subroutines, references to undefined |
834 | filehandles or filehandles opened read-only that you are attempting |
835 | to write on, values used as a number that doesn't look like numbers, |
836 | using an array as though it were a scalar, if your subroutines |
837 | recurse more than 100 deep, and innumerable other things. |
838 | |
b40da996 |
839 | This switch really just enables the internal C<$^W> variable. You |
19799a22 |
840 | can disable or promote into fatal errors specific warnings using |
841 | C<__WARN__> hooks, as described in L<perlvar> and L<perlfunc/warn>. |
842 | See also L<perldiag> and L<perltrap>. A new, fine-grained warning |
843 | facility is also available if you want to manipulate entire classes |
9f1b1f2d |
844 | of warnings; see L<warnings> or L<perllexwarn>. |
a0d0e21e |
845 | |
0453d815 |
846 | =item B<-W> |
847 | |
3c0facb2 |
848 | Enables all warnings regardless of C<no warnings> or C<$^W>. |
0453d815 |
849 | See L<perllexwarn>. |
850 | |
851 | =item B<-X> |
852 | |
3c0facb2 |
853 | Disables all warnings regardless of C<use warnings> or C<$^W>. |
0453d815 |
854 | See L<perllexwarn>. |
855 | |
a0d0e21e |
856 | =item B<-x> I<directory> |
857 | |
19799a22 |
858 | tells Perl that the program is embedded in a larger chunk of unrelated |
859 | ASCII text, such as in a mail message. Leading garbage will be |
860 | discarded until the first line that starts with #! and contains the |
861 | string "perl". Any meaningful switches on that line will be applied. |
862 | If a directory name is specified, Perl will switch to that directory |
863 | before running the program. The B<-x> switch controls only the |
864 | disposal of leading garbage. The program must be terminated with |
865 | C<__END__> if there is trailing garbage to be ignored (the program |
866 | can process any or all of the trailing garbage via the DATA filehandle |
867 | if desired). |
a0d0e21e |
868 | |
1e422769 |
869 | =back |
870 | |
871 | =head1 ENVIRONMENT |
872 | |
873 | =over 12 |
874 | |
875 | =item HOME |
876 | |
877 | Used if chdir has no argument. |
878 | |
879 | =item LOGDIR |
880 | |
881 | Used if chdir has no argument and HOME is not set. |
882 | |
883 | =item PATH |
884 | |
19799a22 |
885 | Used in executing subprocesses, and in finding the program if B<-S> is |
1e422769 |
886 | used. |
887 | |
888 | =item PERL5LIB |
889 | |
890 | A colon-separated list of directories in which to look for Perl library |
891 | files before looking in the standard library and the current |
951ba7fe |
892 | directory. Any architecture-specific directories under the specified |
893 | locations are automatically included if they exist. If PERL5LIB is not |
894 | defined, PERLLIB is used. |
895 | |
896 | When running taint checks (either because the program was running setuid |
897 | or setgid, or the B<-T> switch was used), neither variable is used. |
898 | The program should instead say: |
1e422769 |
899 | |
900 | use lib "/my/directory"; |
901 | |
54310121 |
902 | =item PERL5OPT |
903 | |
904 | Command-line options (switches). Switches in this variable are taken |
1c4db469 |
905 | as if they were on every Perl command line. Only the B<-[DIMUdmtw]> |
19799a22 |
906 | switches are allowed. When running taint checks (because the program |
54310121 |
907 | was running setuid or setgid, or the B<-T> switch was used), this |
74288ac8 |
908 | variable is ignored. If PERL5OPT begins with B<-T>, tainting will be |
909 | enabled, and any subsequent options ignored. |
54310121 |
910 | |
16537909 |
911 | =item PERLIO |
912 | |
44a4342c |
913 | A space (or colon) separated list of PerlIO layers. If perl is built |
03d9e98a |
914 | to use PerlIO system for IO (the default) these layers effect perl's IO. |
44a4342c |
915 | |
916 | It is conventional to start layer names with a colon e.g. C<:perlio> to |
917 | emphasise their similarity to variable "attributes". But the code that parses |
918 | layer specification strings (which is also used to decode the PERLIO |
919 | environment variable) treats the colon as a separator. |
920 | |
921 | The list becomes the default for I<all> perl's IO. Consequently only built-in |
922 | layers can appear in this list, as external layers (such as :encoding()) need |
923 | IO in order to load them!. See L<"open pragma"|open> for how to add external |
924 | encodings as defaults. |
925 | |
926 | The layers that it makes sense to include in the PERLIO environment |
927 | variable are summarised below. For more details see L<PerlIO>. |
16537909 |
928 | |
929 | =over 8 |
930 | |
931 | =item :bytes |
932 | |
44a4342c |
933 | Turns I<off> the C<:utf8> flag for the layer below. |
99366417 |
934 | Unlikely to be useful in global PERLIO environment variable. |
16537909 |
935 | |
936 | =item :crlf |
937 | |
44a4342c |
938 | A layer that implements DOS/Windows like CRLF line endings. |
939 | On read converts pairs of CR,LF to a single "\n" newline character. |
940 | On write converts each "\n" to a CR,LF pair. |
941 | Based on the C<:perlio> layer. |
942 | |
943 | =item :mmap |
944 | |
945 | A layer which implements "reading" of files by using C<mmap()> to |
946 | make (whole) file appear in the process's address space, and then |
947 | using that as PerlIO's "buffer". This I<may> be faster in certain |
948 | circumstances for large files, and may result in less physical memory |
949 | use when multiple processes are reading the same file. |
16537909 |
950 | |
44a4342c |
951 | Files which are not C<mmap()>-able revert to behaving like the C<:perlio> |
952 | layer. Writes also behave like C<:perlio> layer as C<mmap()> for write |
953 | needs extra house-keeping (to extend the file) which negates any advantage. |
16537909 |
954 | |
44a4342c |
955 | The C<:mmap> layer will not exist if platform does not support C<mmap()>. |
16537909 |
956 | |
44a4342c |
957 | =item :perlio |
16537909 |
958 | |
44a4342c |
959 | A from scratch implementation of buffering for PerlIO. Provides fast |
960 | access to the buffer for C<sv_gets> which implements perl's readline/E<lt>E<gt> |
961 | and in general attempts to minimize data copying. |
16537909 |
962 | |
44a4342c |
963 | C<:perlio> will insert a C<:unix> layer below itself to do low level IO. |
16537909 |
964 | |
44a4342c |
965 | =item :raw |
16537909 |
966 | |
0226bbdb |
967 | Applying the <:raw> layer is equivalent to calling C<binmode($fh)>. |
968 | It makes the stream pass each byte as-is without any translation. |
c0ba18c6 |
969 | In particular CRLF translation, and/or :utf8 intuited from locale |
0226bbdb |
970 | are disabled. |
1cbfc93d |
971 | |
0226bbdb |
972 | Arranges for all accesses go straight to the lowest buffered layer provided |
44a4342c |
973 | by the configration. That is it strips off any layers above that layer. |
16537909 |
974 | |
fae2c0fb |
975 | In Perl 5.6 and some books the C<:raw> layer (previously sometimes also |
976 | referred to as a "discipline") is documented as the inverse of the |
977 | C<:crlf> layer. That is no longer the case - other layers which would |
978 | alter binary nature of the stream are also disabled. If you want UNIX |
979 | line endings on a platform that normally does CRLF translation, but still |
980 | want UTF-8 or encoding defaults the appropriate thing to do is to add |
981 | C<:perlio> to PERLIO environment variable. |
16537909 |
982 | |
44a4342c |
983 | =item :stdio |
984 | |
985 | This layer provides PerlIO interface by wrapping system's ANSI C "stdio" |
986 | library calls. The layer provides both buffering and IO. |
987 | Note that C<:stdio> layer does I<not> do CRLF translation even if that |
988 | is platforms normal behaviour. You will need a C<:crlf> layer above it |
989 | to do that. |
990 | |
991 | =item :unix |
992 | |
993 | Lowest level layer which provides basic PerlIO operations in terms of |
994 | UNIX/POSIX numeric file descriptor calls |
995 | C<open(), read(), write(), lseek(), close()> |
16537909 |
996 | |
997 | =item :utf8 |
998 | |
44a4342c |
999 | Turns on a flag on the layer below to tell perl that data sent to the |
1000 | stream should be converted to perl internal "utf8" form and that data from the |
1001 | stream should be considered as so encoded. On ASCII based platforms the |
1002 | encoding is UTF-8 and on EBCDIC platforms UTF-EBCDIC. |
1003 | May be useful in PERLIO environment variable to make UTF-8 the |
1004 | default. (To turn off that behaviour use C<:bytes> layer.) |
1005 | |
1006 | =item :win32 |
1007 | |
ab4f7683 |
1008 | On Win32 platforms this I<experimental> layer uses native "handle" IO |
44a4342c |
1009 | rather than unix-like numeric file descriptor layer. Known to be |
1010 | buggy in this release. |
16537909 |
1011 | |
1012 | =back |
1013 | |
44a4342c |
1014 | On all platforms the default set of layers should give acceptable results. |
1015 | |
ab4f7683 |
1016 | For UNIX platforms that will equivalent of "unix perlio" or "stdio". |
44a4342c |
1017 | Configure is setup to prefer "stdio" implementation if system's library |
1018 | provides for fast access to the buffer, otherwise it uses the "unix perlio" |
1019 | implementation. |
1020 | |
1021 | On Win32 the default in this release is "unix crlf". Win32's "stdio" |
1022 | has a number of bugs/mis-features for perl IO which are somewhat |
99366417 |
1023 | C compiler vendor/version dependent. Using our own C<crlf> layer as |
44a4342c |
1024 | the buffer avoids those issues and makes things more uniform. |
1025 | The C<crlf> layer provides CRLF to/from "\n" conversion as well as |
1026 | buffering. |
1027 | |
1028 | This release uses C<unix> as the bottom layer on Win32 and so still uses C |
1029 | compiler's numeric file descriptor routines. There is an experimental native |
1030 | C<win32> layer which is expected to be enhanced and should eventually replace |
1031 | the C<unix> layer. |
1032 | |
1033 | =item PERLIO_DEBUG |
1034 | |
1035 | If set to the name of a file or device then certain operations of PerlIO |
1036 | sub-system will be logged to that file (opened as append). Typical uses |
1037 | are UNIX: |
1038 | |
1039 | PERLIO_DEBUG=/dev/tty perl script ... |
1040 | |
1041 | and Win32 approximate equivalent: |
1042 | |
1043 | set PERLIO_DEBUG=CON |
1044 | perl script ... |
1045 | |
16537909 |
1046 | |
1e422769 |
1047 | =item PERLLIB |
1048 | |
1049 | A colon-separated list of directories in which to look for Perl library |
1050 | files before looking in the standard library and the current directory. |
1051 | If PERL5LIB is defined, PERLLIB is not used. |
1052 | |
1053 | =item PERL5DB |
1054 | |
1055 | The command used to load the debugger code. The default is: |
1056 | |
1057 | BEGIN { require 'perl5db.pl' } |
1058 | |
19799a22 |
1059 | =item PERL5SHELL (specific to the Win32 port) |
174c211a |
1060 | |
1061 | May be set to an alternative shell that perl must use internally for |
ce1da67e |
1062 | executing "backtick" commands or system(). Default is C<cmd.exe /x/c> |
1063 | on WindowsNT and C<command.com /c> on Windows95. The value is considered |
19799a22 |
1064 | to be space-separated. Precede any character that needs to be protected |
ce1da67e |
1065 | (like a space or backslash) with a backslash. |
1066 | |
1067 | Note that Perl doesn't use COMSPEC for this purpose because |
1068 | COMSPEC has a high degree of variability among users, leading to |
1069 | portability concerns. Besides, perl can use a shell that may not be |
1070 | fit for interactive use, and setting COMSPEC to such a shell may |
1071 | interfere with the proper functioning of other programs (which usually |
1072 | look in COMSPEC to find a shell fit for interactive use). |
174c211a |
1073 | |
1e422769 |
1074 | =item PERL_DEBUG_MSTATS |
1075 | |
67ce8856 |
1076 | Relevant only if perl is compiled with the malloc included with the perl |
a3cb178b |
1077 | distribution (that is, if C<perl -V:d_mymalloc> is 'define'). |
1078 | If set, this causes memory statistics to be dumped after execution. If set |
1e422769 |
1079 | to an integer greater than one, also causes memory statistics to be dumped |
1080 | after compilation. |
1081 | |
1082 | =item PERL_DESTRUCT_LEVEL |
1083 | |
1084 | Relevant only if your perl executable was built with B<-DDEBUGGING>, |
1085 | this controls the behavior of global destruction of objects and other |
64cea5fd |
1086 | references. See L<perlhack/PERL_DESTRUCT_LEVEL> for more information. |
a0d0e21e |
1087 | |
5d170f3a |
1088 | =item PERL_ENCODING |
1089 | |
1090 | If using the C<encoding> pragma without an explicit encoding name, the |
1091 | PERL_ENCODING environment variable is consulted for an encoding name. |
1092 | |
3d0ae7ba |
1093 | =item PERL_ROOT (specific to the VMS port) |
1094 | |
1095 | A translation concealed rooted logical name that contains perl and the |
1096 | logical device for the @INC path on VMS only. Other logical names that |
44a4342c |
1097 | affect perl on VMS include PERLSHR, PERL_ENV_TABLES, and |
1098 | SYS$TIMEZONE_DIFFERENTIAL but are optional and discussed further in |
3d0ae7ba |
1099 | L<perlvms> and in F<README.vms> in the Perl source distribution. |
1100 | |
4ffa73a3 |
1101 | =item PERL_SIGNALS |
1102 | |
1103 | In Perls 5.8.1 and later. If set to C<unsafe> the pre-Perl-5.8.0 |
1104 | signals behaviour (immediate but unsafe) is restored. If set to |
45c0772f |
1105 | C<safe> the safe (or deferred) signals are used. See L<perlipc>. |
4ffa73a3 |
1106 | |
a05d7ebb |
1107 | =item PERL_UNICODE |
acae81db |
1108 | |
bf61ac64 |
1109 | Equivalent to the B<-C> command-line switch. Note that this is not |
1110 | a boolean variable-- setting this to C<"1"> is not the right way to |
5b4f334e |
1111 | "enable Unicode" (whatever that would mean). You can use C<"0"> to |
e654d908 |
1112 | "disable Unicode", though (or alternatively unset PERL_UNICODE in |
1113 | your shell before starting Perl). See the description of the C<-C> |
1114 | switch for more information. |
acae81db |
1115 | |
3d0ae7ba |
1116 | =item SYS$LOGIN (specific to the VMS port) |
1117 | |
1118 | Used if chdir has no argument and HOME and LOGDIR are not set. |
1119 | |
a0d0e21e |
1120 | =back |
1e422769 |
1121 | |
1122 | Perl also has environment variables that control how Perl handles data |
1123 | specific to particular natural languages. See L<perllocale>. |
1124 | |
1125 | Apart from these, Perl uses no other environment variables, except |
19799a22 |
1126 | to make them available to the program being executed, and to child |
1127 | processes. However, programs running setuid would do well to execute |
1e422769 |
1128 | the following lines before doing anything else, just to keep people |
1129 | honest: |
1130 | |
19799a22 |
1131 | $ENV{PATH} = '/bin:/usr/bin'; # or whatever you need |
7bac28a0 |
1132 | $ENV{SHELL} = '/bin/sh' if exists $ENV{SHELL}; |
c90c0ff4 |
1133 | delete @ENV{qw(IFS CDPATH ENV BASH_ENV)}; |