Commit | Line | Data |
954c1994 |
1 | =head1 NAME |
2 | |
1c846c1f |
3 | perlintern - autogenerated documentation of purely B<internal> |
954c1994 |
4 | Perl functions |
5 | |
6 | =head1 DESCRIPTION |
7 | |
1c846c1f |
8 | This file is the autogenerated documentation of functions in the |
4375e838 |
9 | Perl interpreter that are documented using Perl's internal documentation |
1c846c1f |
10 | format but are not marked as part of the Perl API. In other words, |
954c1994 |
11 | B<they are not for use in extensions>! |
12 | |
a8586c98 |
13 | |
7dafbf52 |
14 | =head1 CV reference counts and CvOUTSIDE |
15 | |
16 | =over 8 |
17 | |
18 | =item CvWEAKOUTSIDE |
19 | |
20 | Each CV has a pointer, C<CvOUTSIDE()>, to its lexically enclosing |
21 | CV (if any). Because pointers to anonymous sub prototypes are |
22 | stored in C<&> pad slots, it is a possible to get a circular reference, |
23 | with the parent pointing to the child and vice-versa. To avoid the |
24 | ensuing memory leak, we do not increment the reference count of the CV |
25 | pointed to by C<CvOUTSIDE> in the I<one specific instance> that the parent |
26 | has a C<&> pad slot pointing back to us. In this case, we set the |
27 | C<CvWEAKOUTSIDE> flag in the child. This allows us to determine under what |
28 | circumstances we should decrement the refcount of the parent when freeing |
29 | the child. |
30 | |
31 | There is a further complication with non-closure anonymous subs (ie those |
32 | that do not refer to any lexicals outside that sub). In this case, the |
33 | anonymous prototype is shared rather than being cloned. This has the |
34 | consequence that the parent may be freed while there are still active |
35 | children, eg |
36 | |
37 | BEGIN { $a = sub { eval '$x' } } |
38 | |
39 | In this case, the BEGIN is freed immediately after execution since there |
40 | are no active references to it: the anon sub prototype has |
41 | C<CvWEAKOUTSIDE> set since it's not a closure, and $a points to the same |
42 | CV, so it doesn't contribute to BEGIN's refcount either. When $a is |
43 | executed, the C<eval '$x'> causes the chain of C<CvOUTSIDE>s to be followed, |
44 | and the freed BEGIN is accessed. |
45 | |
46 | To avoid this, whenever a CV and its associated pad is freed, any |
47 | C<&> entries in the pad are explicitly removed from the pad, and if the |
48 | refcount of the pointed-to anon sub is still positive, then that |
49 | child's C<CvOUTSIDE> is set to point to its grandparent. This will only |
50 | occur in the single specific case of a non-closure anon prototype |
51 | having one or more active references (such as C<$a> above). |
52 | |
53 | One other thing to consider is that a CV may be merely undefined |
54 | rather than freed, eg C<undef &foo>. In this case, its refcount may |
55 | not have reached zero, but we still delete its pad and its C<CvROOT> etc. |
56 | Since various children may still have their C<CvOUTSIDE> pointing at this |
57 | undefined CV, we keep its own C<CvOUTSIDE> for the time being, so that |
58 | the chain of lexical scopes is unbroken. For example, the following |
59 | should print 123: |
60 | |
61 | my $x = 123; |
62 | sub tmp { sub { eval '$x' } } |
63 | my $a = tmp(); |
64 | undef &tmp; |
65 | print $a->(); |
66 | |
67 | bool CvWEAKOUTSIDE(CV *cv) |
68 | |
69 | =for hackers |
70 | Found in file cv.h |
71 | |
72 | |
73 | =back |
74 | |
dd2155a4 |
75 | =head1 Functions in file pad.h |
76 | |
77 | |
78 | =over 8 |
79 | |
80 | =item CX_CURPAD_SAVE |
81 | |
82 | Save the current pad in the given context block structure. |
83 | |
84 | void CX_CURPAD_SAVE(struct context) |
85 | |
86 | =for hackers |
87 | Found in file pad.h |
88 | |
89 | =item CX_CURPAD_SV |
90 | |
91 | Access the SV at offset po in the saved current pad in the given |
92 | context block structure (can be used as an lvalue). |
93 | |
f3548bdc |
94 | SV * CX_CURPAD_SV(struct context, PADOFFSET po) |
dd2155a4 |
95 | |
96 | =for hackers |
97 | Found in file pad.h |
98 | |
99 | =item PAD_BASE_SV |
100 | |
101 | Get the value from slot C<po> in the base (DEPTH=1) pad of a padlist |
102 | |
103 | SV * PAD_BASE_SV (PADLIST padlist, PADOFFSET po) |
104 | |
105 | =for hackers |
106 | Found in file pad.h |
107 | |
108 | =item PAD_CLONE_VARS |
109 | |
110 | |CLONE_PARAMS* param |
111 | Clone the state variables associated with running and compiling pads. |
112 | |
113 | void PAD_CLONE_VARS(PerlInterpreter *proto_perl \) |
114 | |
115 | =for hackers |
116 | Found in file pad.h |
117 | |
118 | =item PAD_COMPNAME_FLAGS |
119 | |
120 | Return the flags for the current compiling pad name |
121 | at offset C<po>. Assumes a valid slot entry. |
122 | |
123 | U32 PAD_COMPNAME_FLAGS(PADOFFSET po) |
124 | |
125 | =for hackers |
126 | Found in file pad.h |
127 | |
128 | =item PAD_COMPNAME_GEN |
129 | |
130 | The generation number of the name at offset C<po> in the current |
131 | compiling pad (lvalue). Note that C<SvCUR> is hijacked for this purpose. |
132 | |
133 | STRLEN PAD_COMPNAME_GEN(PADOFFSET po) |
134 | |
135 | =for hackers |
136 | Found in file pad.h |
137 | |
138 | =item PAD_COMPNAME_OURSTASH |
139 | |
140 | Return the stash associated with an C<our> variable. |
141 | Assumes the slot entry is a valid C<our> lexical. |
142 | |
143 | HV * PAD_COMPNAME_OURSTASH(PADOFFSET po) |
144 | |
145 | =for hackers |
146 | Found in file pad.h |
147 | |
148 | =item PAD_COMPNAME_PV |
149 | |
150 | Return the name of the current compiling pad name |
151 | at offset C<po>. Assumes a valid slot entry. |
152 | |
153 | char * PAD_COMPNAME_PV(PADOFFSET po) |
154 | |
155 | =for hackers |
156 | Found in file pad.h |
157 | |
158 | =item PAD_COMPNAME_TYPE |
159 | |
160 | Return the type (stash) of the current compiling pad name at offset |
161 | C<po>. Must be a valid name. Returns null if not typed. |
162 | |
163 | HV * PAD_COMPNAME_TYPE(PADOFFSET po) |
164 | |
165 | =for hackers |
166 | Found in file pad.h |
167 | |
168 | =item PAD_DUP |
169 | |
170 | Clone a padlist. |
171 | |
172 | void PAD_DUP(PADLIST dstpad, PADLIST srcpad, CLONE_PARAMS* param) |
173 | |
174 | =for hackers |
175 | Found in file pad.h |
176 | |
f3548bdc |
177 | =item PAD_RESTORE_LOCAL |
178 | |
179 | Restore the old pad saved into the local variable opad by PAD_SAVE_LOCAL() |
180 | |
181 | void PAD_RESTORE_LOCAL(PAD *opad) |
182 | |
183 | =for hackers |
184 | Found in file pad.h |
185 | |
186 | =item PAD_SAVE_LOCAL |
187 | |
188 | Save the current pad to the local variable opad, then make the |
189 | current pad equal to npad |
190 | |
191 | void PAD_SAVE_LOCAL(PAD *opad, PAD *npad) |
192 | |
193 | =for hackers |
194 | Found in file pad.h |
195 | |
dd2155a4 |
196 | =item PAD_SAVE_SETNULLPAD |
197 | |
198 | Save the current pad then set it to null. |
199 | |
200 | void PAD_SAVE_SETNULLPAD() |
201 | |
202 | =for hackers |
203 | Found in file pad.h |
204 | |
205 | =item PAD_SETSV |
206 | |
207 | Set the slot at offset C<po> in the current pad to C<sv> |
208 | |
209 | SV * PAD_SETSV (PADOFFSET po, SV* sv) |
210 | |
211 | =for hackers |
212 | Found in file pad.h |
213 | |
214 | =item PAD_SET_CUR |
215 | |
216 | Set the current pad to be pad C<n> in the padlist, saving |
217 | the previous current pad. |
218 | |
219 | void PAD_SET_CUR (PADLIST padlist, I32 n) |
220 | |
221 | =for hackers |
222 | Found in file pad.h |
223 | |
bf9cdc68 |
224 | =item PAD_SET_CUR_NOSAVE |
225 | |
226 | like PAD_SET_CUR, but without the save |
227 | |
228 | void PAD_SET_CUR_NOSAVE (PADLIST padlist, I32 n) |
229 | |
230 | =for hackers |
231 | Found in file pad.h |
232 | |
dd2155a4 |
233 | =item PAD_SV |
234 | |
235 | Get the value at offset C<po> in the current pad |
236 | |
237 | void PAD_SV (PADOFFSET po) |
238 | |
239 | =for hackers |
240 | Found in file pad.h |
241 | |
242 | =item PAD_SVl |
243 | |
244 | Lightweight and lvalue version of C<PAD_SV>. |
245 | Get or set the value at offset C<po> in the current pad. |
246 | Unlike C<PAD_SV>, does not print diagnostics with -DX. |
247 | For internal use only. |
248 | |
249 | SV * PAD_SVl (PADOFFSET po) |
250 | |
251 | =for hackers |
252 | Found in file pad.h |
253 | |
dd2155a4 |
254 | =item SAVECLEARSV |
255 | |
256 | Clear the pointed to pad value on scope exit. (ie the runtime action of 'my') |
257 | |
258 | void SAVECLEARSV (SV **svp) |
259 | |
260 | =for hackers |
261 | Found in file pad.h |
262 | |
263 | =item SAVECOMPPAD |
264 | |
265 | save PL_comppad and PL_curpad |
266 | |
dd2155a4 |
267 | |
dd2155a4 |
268 | |
269 | |
270 | |
f3548bdc |
271 | void SAVECOMPPAD() |
dd2155a4 |
272 | |
273 | =for hackers |
274 | Found in file pad.h |
275 | |
276 | =item SAVEPADSV |
277 | |
278 | Save a pad slot (used to restore after an iteration) |
279 | |
f3548bdc |
280 | XXX DAPM it would make more sense to make the arg a PADOFFSET |
dd2155a4 |
281 | void SAVEPADSV (PADOFFSET po) |
282 | |
283 | =for hackers |
284 | Found in file pad.h |
285 | |
286 | |
287 | =back |
288 | |
a3985cdc |
289 | =head1 Functions in file pp_ctl.c |
290 | |
291 | |
292 | =over 8 |
293 | |
294 | =item find_runcv |
295 | |
296 | Locate the CV corresponding to the currently executing sub or eval. |
d819b83a |
297 | If db_seqp is non_null, skip CVs that are in the DB package and populate |
298 | *db_seqp with the cop sequence number at the point that the DB:: code was |
299 | entered. (allows debuggers to eval in the scope of the breakpoint rather |
8006bbc3 |
300 | than in in the scope of the debugger itself). |
a3985cdc |
301 | |
d819b83a |
302 | CV* find_runcv(U32 *db_seqp) |
a3985cdc |
303 | |
304 | =for hackers |
305 | Found in file pp_ctl.c |
306 | |
307 | |
308 | =back |
309 | |
a4f1a029 |
310 | =head1 Global Variables |
78f9721b |
311 | |
a4f1a029 |
312 | =over 8 |
78f9721b |
313 | |
2eb25c99 |
314 | =item PL_DBsingle |
315 | |
316 | When Perl is run in debugging mode, with the B<-d> switch, this SV is a |
317 | boolean which indicates whether subs are being single-stepped. |
318 | Single-stepping is automatically turned on after every step. This is the C |
319 | variable which corresponds to Perl's $DB::single variable. See |
320 | C<PL_DBsub>. |
321 | |
322 | SV * PL_DBsingle |
323 | |
324 | =for hackers |
325 | Found in file intrpvar.h |
326 | |
327 | =item PL_DBsub |
328 | |
329 | When Perl is run in debugging mode, with the B<-d> switch, this GV contains |
330 | the SV which holds the name of the sub being debugged. This is the C |
331 | variable which corresponds to Perl's $DB::sub variable. See |
332 | C<PL_DBsingle>. |
333 | |
334 | GV * PL_DBsub |
335 | |
336 | =for hackers |
337 | Found in file intrpvar.h |
338 | |
339 | =item PL_DBtrace |
340 | |
341 | Trace variable used when Perl is run in debugging mode, with the B<-d> |
342 | switch. This is the C variable which corresponds to Perl's $DB::trace |
343 | variable. See C<PL_DBsingle>. |
344 | |
345 | SV * PL_DBtrace |
346 | |
347 | =for hackers |
348 | Found in file intrpvar.h |
349 | |
350 | =item PL_dowarn |
351 | |
352 | The C variable which corresponds to Perl's $^W warning variable. |
353 | |
354 | bool PL_dowarn |
355 | |
356 | =for hackers |
357 | Found in file intrpvar.h |
358 | |
359 | =item PL_last_in_gv |
360 | |
361 | The GV which was last used for a filehandle input operation. (C<< <FH> >>) |
362 | |
363 | GV* PL_last_in_gv |
364 | |
365 | =for hackers |
366 | Found in file thrdvar.h |
367 | |
368 | =item PL_ofs_sv |
369 | |
370 | The output field separator - C<$,> in Perl space. |
371 | |
372 | SV* PL_ofs_sv |
373 | |
374 | =for hackers |
375 | Found in file thrdvar.h |
376 | |
377 | =item PL_rs |
378 | |
379 | The input record separator - C<$/> in Perl space. |
380 | |
381 | SV* PL_rs |
382 | |
383 | =for hackers |
384 | Found in file thrdvar.h |
385 | |
645c22ef |
386 | |
a4f1a029 |
387 | =back |
645c22ef |
388 | |
a4f1a029 |
389 | =head1 GV Functions |
390 | |
391 | =over 8 |
392 | |
393 | =item is_gv_magical |
394 | |
395 | Returns C<TRUE> if given the name of a magical GV. |
396 | |
397 | Currently only useful internally when determining if a GV should be |
398 | created even in rvalue contexts. |
399 | |
400 | C<flags> is not used at present but available for future extension to |
401 | allow selecting particular classes of magical variable. |
402 | |
766f8916 |
403 | Currently assumes that C<name> is NUL terminated (as well as len being valid). |
404 | This assumption is met by all callers within the perl core, which all pass |
405 | pointers returned by SvPV. |
406 | |
a4f1a029 |
407 | bool is_gv_magical(char *name, STRLEN len, U32 flags) |
645c22ef |
408 | |
409 | =for hackers |
a4f1a029 |
410 | Found in file gv.c |
411 | |
412 | |
413 | =back |
414 | |
415 | =head1 IO Functions |
416 | |
417 | =over 8 |
645c22ef |
418 | |
a8586c98 |
419 | =item start_glob |
420 | |
421 | Function called by C<do_readline> to spawn a glob (or do the glob inside |
422 | perl on VMS). This code used to be inline, but now perl uses C<File::Glob> |
bd16a5f0 |
423 | this glob starter is only used by miniperl during the build process. |
a8586c98 |
424 | Moving it away shrinks pp_hot.c; shrinking pp_hot.c helps speed perl up. |
425 | |
426 | PerlIO* start_glob(SV* pattern, IO *io) |
427 | |
428 | =for hackers |
429 | Found in file doio.c |
430 | |
a4f1a029 |
431 | |
432 | =back |
433 | |
434 | =head1 Pad Data Structures |
435 | |
436 | =over 8 |
437 | |
438 | =item CvPADLIST |
439 | |
440 | CV's can have CvPADLIST(cv) set to point to an AV. |
441 | |
442 | For these purposes "forms" are a kind-of CV, eval""s are too (except they're |
443 | not callable at will and are always thrown away after the eval"" is done |
b5c19bd7 |
444 | executing). Require'd files are simply evals without any outer lexical |
445 | scope. |
a4f1a029 |
446 | |
447 | XSUBs don't have CvPADLIST set - dXSTARG fetches values from PL_curpad, |
448 | but that is really the callers pad (a slot of which is allocated by |
449 | every entersub). |
450 | |
451 | The CvPADLIST AV has does not have AvREAL set, so REFCNT of component items |
f3548bdc |
452 | is managed "manual" (mostly in pad.c) rather than normal av.c rules. |
a4f1a029 |
453 | The items in the AV are not SVs as for a normal AV, but other AVs: |
454 | |
455 | 0'th Entry of the CvPADLIST is an AV which represents the "names" or rather |
456 | the "static type information" for lexicals. |
457 | |
458 | The CvDEPTH'th entry of CvPADLIST AV is an AV which is the stack frame at that |
459 | depth of recursion into the CV. |
460 | The 0'th slot of a frame AV is an AV which is @_. |
461 | other entries are storage for variables and op targets. |
462 | |
463 | During compilation: |
a6d05634 |
464 | C<PL_comppad_name> is set to the names AV. |
465 | C<PL_comppad> is set to the frame AV for the frame CvDEPTH == 1. |
466 | C<PL_curpad> is set to the body of the frame AV (i.e. AvARRAY(PL_comppad)). |
a4f1a029 |
467 | |
f3548bdc |
468 | During execution, C<PL_comppad> and C<PL_curpad> refer to the live |
469 | frame of the currently executing sub. |
470 | |
471 | Iterating over the names AV iterates over all possible pad |
a4f1a029 |
472 | items. Pad slots that are SVs_PADTMP (targets/GVs/constants) end up having |
473 | &PL_sv_undef "names" (see pad_alloc()). |
474 | |
475 | Only my/our variable (SVs_PADMY/SVs_PADOUR) slots get valid names. |
476 | The rest are op targets/GVs/constants which are statically allocated |
477 | or resolved at compile time. These don't have names by which they |
478 | can be looked up from Perl code at run time through eval"" like |
479 | my/our variables can be. Since they can't be looked up by "name" |
480 | but only by their index allocated at compile time (which is usually |
481 | in PL_op->op_targ), wasting a name SV for them doesn't make sense. |
482 | |
483 | The SVs in the names AV have their PV being the name of the variable. |
dd2155a4 |
484 | NV+1..IV inclusive is a range of cop_seq numbers for which the name is |
485 | valid. For typed lexicals name SV is SVt_PVMG and SvSTASH points at the |
486 | type. For C<our> lexicals, the type is SVt_PVGV, and GvSTASH points at the |
487 | stash of the associated global (so that duplicate C<our> delarations in the |
488 | same package can be detected). SvCUR is sometimes hijacked to |
489 | store the generation number during compilation. |
a4f1a029 |
490 | |
b5c19bd7 |
491 | If SvFAKE is set on the name SV, then that slot in the frame AV is |
492 | a REFCNT'ed reference to a lexical from "outside". In this case, |
493 | the name SV does not use NVX and IVX to store a cop_seq range, since it is |
494 | in scope throughout. Instead IVX stores some flags containing info about |
495 | the real lexical (is it declared in an anon, and is it capable of being |
496 | instantiated multiple times?), and for fake ANONs, NVX contains the index |
497 | within the parent's pad where the lexical's value is stored, to make |
498 | cloning quicker. |
a4f1a029 |
499 | |
a6d05634 |
500 | If the 'name' is '&' the corresponding entry in frame AV |
a4f1a029 |
501 | is a CV representing a possible closure. |
502 | (SvFAKE and name of '&' is not a meaningful combination currently but could |
503 | become so if C<my sub foo {}> is implemented.) |
504 | |
5c3943b6 |
505 | Note that formats are treated as anon subs, and are cloned each time |
506 | write is called (if necessary). |
507 | |
2814eb74 |
508 | The flag SVf_PADSTALE is cleared on lexicals each time the my() is executed, |
509 | and set on scope exit. This allows the 'Variable $x is not available' warning |
510 | to be generated in evals, such as |
511 | |
512 | { my $x = 1; sub f { eval '$x'} } f(); |
513 | |
a4f1a029 |
514 | AV * CvPADLIST(CV *cv) |
515 | |
516 | =for hackers |
dd2155a4 |
517 | Found in file pad.c |
518 | |
519 | =item cv_clone |
520 | |
521 | Clone a CV: make a new CV which points to the same code etc, but which |
ad63d80f |
522 | has a newly-created pad built by copying the prototype pad and capturing |
dd2155a4 |
523 | any outer lexicals. |
524 | |
525 | CV* cv_clone(CV* proto) |
526 | |
527 | =for hackers |
528 | Found in file pad.c |
529 | |
530 | =item cv_dump |
531 | |
532 | dump the contents of a CV |
533 | |
534 | void cv_dump(CV *cv, char *title) |
535 | |
536 | =for hackers |
537 | Found in file pad.c |
538 | |
539 | =item do_dump_pad |
540 | |
541 | Dump the contents of a padlist |
542 | |
543 | void do_dump_pad(I32 level, PerlIO *file, PADLIST *padlist, int full) |
544 | |
545 | =for hackers |
546 | Found in file pad.c |
547 | |
548 | =item intro_my |
549 | |
550 | "Introduce" my variables to visible status. |
551 | |
552 | U32 intro_my() |
553 | |
554 | =for hackers |
555 | Found in file pad.c |
556 | |
557 | =item pad_add_anon |
558 | |
559 | Add an anon code entry to the current compiling pad |
560 | |
561 | PADOFFSET pad_add_anon(SV* sv, OPCODE op_type) |
562 | |
563 | =for hackers |
564 | Found in file pad.c |
565 | |
566 | =item pad_add_name |
567 | |
b5c19bd7 |
568 | Create a new name and associated PADMY SV in the current pad; return the |
569 | offset. |
dd2155a4 |
570 | If C<typestash> is valid, the name is for a typed lexical; set the |
571 | name's stash to that value. |
572 | If C<ourstash> is valid, it's an our lexical, set the name's |
573 | GvSTASH to that value |
574 | |
dd2155a4 |
575 | If fake, it means we're cloning an existing entry |
576 | |
577 | PADOFFSET pad_add_name(char *name, HV* typestash, HV* ourstash, bool clone) |
578 | |
579 | =for hackers |
580 | Found in file pad.c |
581 | |
582 | =item pad_alloc |
583 | |
584 | Allocate a new my or tmp pad entry. For a my, simply push a null SV onto |
585 | the end of PL_comppad, but for a tmp, scan the pad from PL_padix upwards |
586 | for a slot which has no name and and no active value. |
587 | |
588 | PADOFFSET pad_alloc(I32 optype, U32 tmptype) |
589 | |
590 | =for hackers |
591 | Found in file pad.c |
592 | |
593 | =item pad_block_start |
594 | |
595 | Update the pad compilation state variables on entry to a new block |
596 | |
597 | void pad_block_start(int full) |
598 | |
599 | =for hackers |
600 | Found in file pad.c |
601 | |
602 | =item pad_check_dup |
603 | |
604 | Check for duplicate declarations: report any of: |
605 | * a my in the current scope with the same name; |
606 | * an our (anywhere in the pad) with the same name and the same stash |
607 | as C<ourstash> |
608 | C<is_our> indicates that the name to check is an 'our' declaration |
609 | |
dd2155a4 |
610 | void pad_check_dup(char* name, bool is_our, HV* ourstash) |
611 | |
612 | =for hackers |
613 | Found in file pad.c |
614 | |
615 | =item pad_findlex |
616 | |
617 | Find a named lexical anywhere in a chain of nested pads. Add fake entries |
b5c19bd7 |
618 | in the inner pads if it's found in an outer one. |
619 | |
620 | Returns the offset in the bottom pad of the lex or the fake lex. |
621 | cv is the CV in which to start the search, and seq is the current cop_seq |
622 | to match against. If warn is true, print appropriate warnings. The out_* |
623 | vars return values, and so are pointers to where the returned values |
624 | should be stored. out_capture, if non-null, requests that the innermost |
625 | instance of the lexical is captured; out_name_sv is set to the innermost |
626 | matched namesv or fake namesv; out_flags returns the flags normally |
627 | associated with the IVX field of a fake namesv. |
628 | |
629 | Note that pad_findlex() is recursive; it recurses up the chain of CVs, |
630 | then comes back down, adding fake entries as it goes. It has to be this way |
631 | because fake namesvs in anon protoypes have to store in NVX the index into |
632 | the parent pad. |
633 | |
634 | PADOFFSET pad_findlex(char *name, CV* cv, U32 seq, int warn, SV** out_capture, SV** out_name_sv, int *out_flags) |
dd2155a4 |
635 | |
636 | =for hackers |
637 | Found in file pad.c |
638 | |
639 | =item pad_findmy |
640 | |
ad63d80f |
641 | Given a lexical name, try to find its offset, first in the current pad, |
dd2155a4 |
642 | or failing that, in the pads of any lexically enclosing subs (including |
ad63d80f |
643 | the complications introduced by eval). If the name is found in an outer pad, |
644 | then a fake entry is added to the current pad. |
dd2155a4 |
645 | Returns the offset in the current pad, or NOT_IN_PAD on failure. |
646 | |
647 | PADOFFSET pad_findmy(char* name) |
648 | |
649 | =for hackers |
650 | Found in file pad.c |
651 | |
652 | =item pad_fixup_inner_anons |
653 | |
654 | For any anon CVs in the pad, change CvOUTSIDE of that CV from |
7dafbf52 |
655 | old_cv to new_cv if necessary. Needed when a newly-compiled CV has to be |
656 | moved to a pre-existing CV struct. |
dd2155a4 |
657 | |
658 | void pad_fixup_inner_anons(PADLIST *padlist, CV *old_cv, CV *new_cv) |
659 | |
660 | =for hackers |
661 | Found in file pad.c |
662 | |
663 | =item pad_free |
664 | |
665 | Free the SV at offet po in the current pad. |
666 | |
667 | void pad_free(PADOFFSET po) |
668 | |
669 | =for hackers |
670 | Found in file pad.c |
671 | |
672 | =item pad_leavemy |
673 | |
674 | Cleanup at end of scope during compilation: set the max seq number for |
675 | lexicals in this scope and warn of any lexicals that never got introduced. |
676 | |
677 | void pad_leavemy() |
678 | |
679 | =for hackers |
680 | Found in file pad.c |
681 | |
682 | =item pad_new |
683 | |
ad63d80f |
684 | Create a new compiling padlist, saving and updating the various global |
dd2155a4 |
685 | vars at the same time as creating the pad itself. The following flags |
686 | can be OR'ed together: |
687 | |
688 | padnew_CLONE this pad is for a cloned CV |
689 | padnew_SAVE save old globals |
690 | padnew_SAVESUB also save extra stuff for start of sub |
691 | |
c7c737cb |
692 | PADLIST* pad_new(int flags) |
dd2155a4 |
693 | |
694 | =for hackers |
695 | Found in file pad.c |
696 | |
697 | =item pad_push |
698 | |
699 | Push a new pad frame onto the padlist, unless there's already a pad at |
26019298 |
700 | this depth, in which case don't bother creating a new one. Then give |
701 | the new pad an @_ in slot zero. |
dd2155a4 |
702 | |
26019298 |
703 | void pad_push(PADLIST *padlist, int depth) |
dd2155a4 |
704 | |
705 | =for hackers |
706 | Found in file pad.c |
707 | |
708 | =item pad_reset |
709 | |
710 | Mark all the current temporaries for reuse |
711 | |
712 | void pad_reset() |
713 | |
714 | =for hackers |
715 | Found in file pad.c |
716 | |
717 | =item pad_setsv |
718 | |
719 | Set the entry at offset po in the current pad to sv. |
720 | Use the macro PAD_SETSV() rather than calling this function directly. |
721 | |
722 | void pad_setsv(PADOFFSET po, SV* sv) |
723 | |
724 | =for hackers |
725 | Found in file pad.c |
726 | |
727 | =item pad_swipe |
728 | |
729 | Abandon the tmp in the current pad at offset po and replace with a |
730 | new one. |
731 | |
732 | void pad_swipe(PADOFFSET po, bool refadjust) |
733 | |
734 | =for hackers |
735 | Found in file pad.c |
736 | |
737 | =item pad_tidy |
738 | |
739 | Tidy up a pad after we've finished compiling it: |
740 | * remove most stuff from the pads of anonsub prototypes; |
741 | * give it a @_; |
742 | * mark tmps as such. |
743 | |
744 | void pad_tidy(padtidy_type type) |
745 | |
746 | =for hackers |
747 | Found in file pad.c |
748 | |
749 | =item pad_undef |
750 | |
751 | Free the padlist associated with a CV. |
752 | If parts of it happen to be current, we null the relevant |
753 | PL_*pad* global vars so that we don't have any dangling references left. |
754 | We also repoint the CvOUTSIDE of any about-to-be-orphaned |
a3985cdc |
755 | inner subs to the outer of this cv. |
dd2155a4 |
756 | |
7dafbf52 |
757 | (This function should really be called pad_free, but the name was already |
758 | taken) |
759 | |
a3985cdc |
760 | void pad_undef(CV* cv) |
dd2155a4 |
761 | |
762 | =for hackers |
763 | Found in file pad.c |
a4f1a029 |
764 | |
765 | |
766 | =back |
767 | |
768 | =head1 Stack Manipulation Macros |
769 | |
770 | =over 8 |
771 | |
772 | =item djSP |
773 | |
774 | Declare Just C<SP>. This is actually identical to C<dSP>, and declares |
775 | a local copy of perl's stack pointer, available via the C<SP> macro. |
776 | See C<SP>. (Available for backward source code compatibility with the |
777 | old (Perl 5.005) thread model.) |
778 | |
779 | djSP; |
780 | |
781 | =for hackers |
782 | Found in file pp.h |
783 | |
784 | =item LVRET |
785 | |
786 | True if this op will be the return value of an lvalue subroutine |
787 | |
788 | =for hackers |
789 | Found in file pp.h |
790 | |
791 | |
792 | =back |
793 | |
794 | =head1 SV Manipulation Functions |
795 | |
796 | =over 8 |
797 | |
29489e7c |
798 | =item find_uninit_var |
799 | |
800 | Find the name of the undefined variable (if any) that caused the operator o |
801 | to issue a "Use of uninitialized value" warning. |
802 | If match is true, only return a name if it's value matches uninit_sv. |
803 | So roughly speaking, if a unary operator (such as OP_COS) generates a |
804 | warning, then following the direct child of the op may yield an |
805 | OP_PADSV or OP_GV that gives the name of the undefined variable. On the |
806 | other hand, with OP_ADD there are two branches to follow, so we only print |
807 | the variable name if we get an exact match. |
808 | |
809 | The name is returned as a mortal SV. |
810 | |
811 | Assumes that PL_op is the op that originally triggered the error, and that |
812 | PL_comppad/PL_curpad points to the currently executing pad. |
813 | |
814 | SV* find_uninit_var(OP* obase, SV* uninit_sv, bool top) |
815 | |
816 | =for hackers |
817 | Found in file sv.c |
818 | |
a4f1a029 |
819 | =item report_uninit |
820 | |
821 | Print appropriate "Use of uninitialized variable" warning |
822 | |
29489e7c |
823 | void report_uninit(SV* uninit_sv) |
a4f1a029 |
824 | |
825 | =for hackers |
826 | Found in file sv.c |
827 | |
645c22ef |
828 | =item sv_add_arena |
829 | |
830 | Given a chunk of memory, link it to the head of the list of arenas, |
831 | and split it into a list of free SVs. |
832 | |
833 | void sv_add_arena(char* ptr, U32 size, U32 flags) |
834 | |
835 | =for hackers |
836 | Found in file sv.c |
837 | |
838 | =item sv_clean_all |
839 | |
840 | Decrement the refcnt of each remaining SV, possibly triggering a |
841 | cleanup. This function may have to be called multiple times to free |
8fb26106 |
842 | SVs which are in complex self-referential hierarchies. |
645c22ef |
843 | |
844 | I32 sv_clean_all() |
845 | |
846 | =for hackers |
847 | Found in file sv.c |
848 | |
849 | =item sv_clean_objs |
850 | |
851 | Attempt to destroy all objects not yet freed |
852 | |
853 | void sv_clean_objs() |
854 | |
855 | =for hackers |
856 | Found in file sv.c |
857 | |
858 | =item sv_free_arenas |
859 | |
860 | Deallocate the memory used by all arenas. Note that all the individual SV |
861 | heads and bodies within the arenas must already have been freed. |
862 | |
863 | void sv_free_arenas() |
864 | |
865 | =for hackers |
866 | Found in file sv.c |
867 | |
a4f1a029 |
868 | |
954c1994 |
869 | =back |
870 | |
871 | =head1 AUTHORS |
872 | |
1c846c1f |
873 | The autodocumentation system was originally added to the Perl core by |
874 | Benjamin Stuhl. Documentation is by whoever was kind enough to |
954c1994 |
875 | document their functions. |
876 | |
877 | =head1 SEE ALSO |
878 | |
879 | perlguts(1), perlapi(1) |
880 | |