Test case for #10433/#10424.
[p5sagit/p5-mst-13.2.git] / perlio.h
CommitLineData
76ced9ad 1#ifndef _PERLIO_H
2#define _PERLIO_H
3/*
4 Interface for perl to IO functions.
5 There is a hierachy of Configure determined #define controls:
6 USE_STDIO - forces PerlIO_xxx() to be #define-d onto stdio functions.
7 This is used for x2p subdirectory and for conservative
8 builds - "just like perl5.00X used to be".
9 This dominates over the others.
10
11 USE_PERLIO - The primary Configure variable that enables PerlIO.
12 If USE_PERLIO is _NOT_ set
13 then USE_STDIO above will be set to be conservative.
14 If USE_PERLIO is set
15 then there are two modes determined by USE_SFIO:
16
17 USE_SFIO - If set causes PerlIO_xxx() to be #define-d onto sfio functions.
18 A backward compatability mode for some specialist applications.
19
20 If USE_SFIO is not set then PerlIO_xxx() are real functions
21 defined in perlio.c which implement extra functionality
22 required for utf8 support.
23
24 One further note - the table-of-functions scheme controlled
25 by PERL_IMPLICIT_SYS turns on USE_PERLIO so that iperlsys.h can
26 #define PerlIO_xxx() to go via the function table, without having
27 to #undef them from (say) stdio forms.
28
29*/
30
31#if defined(PERL_IMPLICIT_SYS)
32#ifndef USE_PERLIO
33# define USE_PERLIO
34#endif
35#endif
36
37#ifndef USE_PERLIO
38# define USE_STDIO
39#endif
40
41#ifdef USE_STDIO
42# ifndef PERLIO_IS_STDIO
43# define PERLIO_IS_STDIO
44# endif
45#endif
46
47/* -------------------- End of Configure controls ---------------------------- */
48
49/*
50 * Although we may not want stdio to be used including <stdio.h> here
51 * avoids issues where stdio.h has strange side effects
52 */
53#include <stdio.h>
54
55#if defined(USE_64_BIT_STDIO) && defined(HAS_FTELLO) && !defined(USE_FTELL64)
56#define ftell ftello
57#endif
58
59#if defined(USE_64_BIT_STDIO) && defined(HAS_FSEEKO) && !defined(USE_FSEEK64)
60#define fseek fseeko
61#endif
62
63#ifdef PERLIO_IS_STDIO
64/* #define PerlIO_xxxx() as equivalent stdio function */
65#include "perlsdio.h"
66#else /* PERLIO_IS_STDIO */
67#ifdef USE_SFIO
68/* #define PerlIO_xxxx() as equivalent sfio function */
69#include "perlsfio.h"
70#endif /* USE_SFIO */
71#endif /* PERLIO_IS_STDIO */
72
73#ifndef PerlIO
74/* ----------- PerlIO implementation ---------- */
75/* PerlIO not #define-d to something else - define the implementation */
76
77typedef struct _PerlIO PerlIOl;
78typedef struct _PerlIO_funcs PerlIO_funcs;
79typedef PerlIOl *PerlIO;
80#define PerlIO PerlIO
a1d180c4 81#define PERLIO_LAYERS 1
76ced9ad 82
a999f61b 83extern void PerlIO_define_layer (pTHX_ PerlIO_funcs *tab);
2edd7e44 84extern SV * PerlIO_find_layer (pTHX_ const char *name, STRLEN len, int load);
e3f3bf95 85extern PerlIO * PerlIO_push (pTHX_ PerlIO *f,PerlIO_funcs *tab,const char *mode,SV *arg);
a999f61b 86extern void PerlIO_pop (pTHX_ PerlIO *f);
76ced9ad 87
88#endif /* PerlIO */
89
90/* ----------- End of implementation choices ---------- */
91
92#ifndef PERLIO_IS_STDIO
93/* Not using stdio _directly_ as PerlIO */
94
95/* We now need to determine what happens if source trys to use stdio.
96 * There are three cases based on PERLIO_NOT_STDIO which XS code
97 * can set how it wants.
98 */
99
100#ifdef PERL_CORE
101/* Make a choice for perl core code
102 - currently this is set to try and catch lingering raw stdio calls.
103 This is a known issue with some non UNIX ports which still use
104 "native" stdio features.
105*/
106#ifndef PERLIO_NOT_STDIO
107#define PERLIO_NOT_STDIO 1
108#endif
f7e7eb72 109#else
110#ifndef PERLIO_NOT_STDIO
111#define PERLIO_NOT_STDIO 0
112#endif
76ced9ad 113#endif
114
115#ifdef PERLIO_NOT_STDIO
116#if PERLIO_NOT_STDIO
117/*
118 * PERLIO_NOT_STDIO #define'd as 1
119 * Case 1: Strong denial of stdio - make all stdio calls (we can think of) errors
120 */
121#include "nostdio.h"
122#else /* if PERLIO_NOT_STDIO */
123/*
124 * PERLIO_NOT_STDIO #define'd as 0
125 * Case 2: Declares that both PerlIO and stdio can be used
126 */
127#endif /* if PERLIO_NOT_STDIO */
128#else /* ifdef PERLIO_NOT_STDIO */
129/*
130 * PERLIO_NOT_STDIO not defined
131 * Case 3: Try and fake stdio calls as PerlIO calls
132 */
133#include "fakesdio.h"
134#endif /* ifndef PERLIO_NOT_STDIO */
135#endif /* PERLIO_IS_STDIO */
136
ac27b0f5 137#define specialCopIO(sv) ((sv) != Nullsv)
138
76ced9ad 139/* ----------- fill in things that have not got #define'd ---------- */
140
141#ifndef Fpos_t
142#define Fpos_t Off_t
143#endif
144
145#ifndef EOF
146#define EOF (-1)
147#endif
148
149/* This is to catch case with no stdio */
150#ifndef BUFSIZ
151#define BUFSIZ 1024
152#endif
153
154#ifndef SEEK_SET
155#define SEEK_SET 0
156#endif
157
158#ifndef SEEK_CUR
159#define SEEK_CUR 1
160#endif
161
162#ifndef SEEK_END
163#define SEEK_END 2
164#endif
165
166/* --------------------- Now prototypes for functions --------------- */
167
adb71456 168START_EXTERN_C
169
76ced9ad 170#ifndef NEXT30_NO_ATTRIBUTE
171#ifndef HASATTRIBUTE /* disable GNU-cc attribute checking? */
172#ifdef __attribute__ /* Avoid possible redefinition errors */
173#undef __attribute__
174#endif
175#define __attribute__(attr)
176#endif
177#endif
178
179#ifndef PerlIO_init
180extern void PerlIO_init (void);
181#endif
182#ifndef PerlIO_stdoutf
183extern int PerlIO_stdoutf (const char *,...)
184 __attribute__((__format__ (__printf__, 1, 2)));
185#endif
186#ifndef PerlIO_puts
187extern int PerlIO_puts (PerlIO *,const char *);
188#endif
189#ifndef PerlIO_open
190extern PerlIO * PerlIO_open (const char *,const char *);
191#endif
6e60e805 192#ifndef PerlIO_openn
ee518936 193extern PerlIO * PerlIO_openn (pTHX_ const char *layers, const char *mode,int fd,int imode,int perm,PerlIO *old,int narg,SV **arg);
194#endif
76ced9ad 195#ifndef PerlIO_close
196extern int PerlIO_close (PerlIO *);
197#endif
198#ifndef PerlIO_eof
199extern int PerlIO_eof (PerlIO *);
200#endif
201#ifndef PerlIO_error
202extern int PerlIO_error (PerlIO *);
203#endif
204#ifndef PerlIO_clearerr
205extern void PerlIO_clearerr (PerlIO *);
206#endif
207#ifndef PerlIO_getc
208extern int PerlIO_getc (PerlIO *);
209#endif
210#ifndef PerlIO_putc
211extern int PerlIO_putc (PerlIO *,int);
212#endif
213#ifndef PerlIO_flush
214extern int PerlIO_flush (PerlIO *);
215#endif
216#ifndef PerlIO_ungetc
217extern int PerlIO_ungetc (PerlIO *,int);
218#endif
219#ifndef PerlIO_fileno
220extern int PerlIO_fileno (PerlIO *);
221#endif
222#ifndef PerlIO_fdopen
223extern PerlIO * PerlIO_fdopen (int, const char *);
224#endif
225#ifndef PerlIO_importFILE
226extern PerlIO * PerlIO_importFILE (FILE *,int);
227#endif
228#ifndef PerlIO_exportFILE
229extern FILE * PerlIO_exportFILE (PerlIO *,int);
230#endif
231#ifndef PerlIO_findFILE
232extern FILE * PerlIO_findFILE (PerlIO *);
233#endif
234#ifndef PerlIO_releaseFILE
235extern void PerlIO_releaseFILE (PerlIO *,FILE *);
236#endif
237#ifndef PerlIO_read
238extern SSize_t PerlIO_read (PerlIO *,void *,Size_t);
239#endif
a15cef0c 240#ifndef PerlIO_unread
241extern SSize_t PerlIO_unread (PerlIO *,const void *,Size_t);
242#endif
76ced9ad 243#ifndef PerlIO_write
244extern SSize_t PerlIO_write (PerlIO *,const void *,Size_t);
245#endif
246#ifndef PerlIO_setlinebuf
247extern void PerlIO_setlinebuf (PerlIO *);
248#endif
249#ifndef PerlIO_printf
250extern int PerlIO_printf (PerlIO *, const char *,...)
251 __attribute__((__format__ (__printf__, 2, 3)));
252#endif
253#ifndef PerlIO_sprintf
254extern int PerlIO_sprintf (char *, int, const char *,...)
255 __attribute__((__format__ (__printf__, 3, 4)));
256#endif
257#ifndef PerlIO_vprintf
258extern int PerlIO_vprintf (PerlIO *, const char *, va_list);
259#endif
260#ifndef PerlIO_tell
261extern Off_t PerlIO_tell (PerlIO *);
262#endif
263#ifndef PerlIO_seek
264extern int PerlIO_seek (PerlIO *, Off_t, int);
265#endif
266#ifndef PerlIO_rewind
267extern void PerlIO_rewind (PerlIO *);
268#endif
269#ifndef PerlIO_has_base
270extern int PerlIO_has_base (PerlIO *);
271#endif
272#ifndef PerlIO_has_cntptr
273extern int PerlIO_has_cntptr (PerlIO *);
274#endif
275#ifndef PerlIO_fast_gets
276extern int PerlIO_fast_gets (PerlIO *);
277#endif
278#ifndef PerlIO_canset_cnt
279extern int PerlIO_canset_cnt (PerlIO *);
280#endif
281#ifndef PerlIO_get_ptr
282extern STDCHAR * PerlIO_get_ptr (PerlIO *);
283#endif
284#ifndef PerlIO_get_cnt
285extern int PerlIO_get_cnt (PerlIO *);
286#endif
287#ifndef PerlIO_set_cnt
288extern void PerlIO_set_cnt (PerlIO *,int);
289#endif
290#ifndef PerlIO_set_ptrcnt
291extern void PerlIO_set_ptrcnt (PerlIO *,STDCHAR *,int);
292#endif
293#ifndef PerlIO_get_base
294extern STDCHAR * PerlIO_get_base (PerlIO *);
295#endif
296#ifndef PerlIO_get_bufsiz
297extern int PerlIO_get_bufsiz (PerlIO *);
298#endif
299#ifndef PerlIO_tmpfile
300extern PerlIO * PerlIO_tmpfile (void);
301#endif
302#ifndef PerlIO_stdin
303extern PerlIO * PerlIO_stdin (void);
304#endif
305#ifndef PerlIO_stdout
306extern PerlIO * PerlIO_stdout (void);
307#endif
308#ifndef PerlIO_stderr
309extern PerlIO * PerlIO_stderr (void);
310#endif
311#ifndef PerlIO_getpos
766a733e 312extern int PerlIO_getpos (PerlIO *,SV *);
76ced9ad 313#endif
314#ifndef PerlIO_setpos
766a733e 315extern int PerlIO_setpos (PerlIO *,SV *);
76ced9ad 316#endif
317#ifndef PerlIO_fdupopen
5f1a76d0 318extern PerlIO * PerlIO_fdupopen (pTHX_ PerlIO *);
319#endif
11ae941d 320#if !defined(PerlIO_modestr) && !defined(PERLIO_IS_STDIO)
5f1a76d0 321extern char *PerlIO_modestr (PerlIO *,char *buf);
76ced9ad 322#endif
323#ifndef PerlIO_isutf8
324extern int PerlIO_isutf8 (PerlIO *);
325#endif
156e9b51 326#ifndef PerlIO_apply_layers
60382766 327extern int PerlIO_apply_layers (pTHX_ PerlIO *f, const char *mode, const char *names);
328#endif
329#ifndef PerlIO_binmode
330extern int PerlIO_binmode (pTHX_ PerlIO *f, int iotype, int omode, const char *names);
ac27b0f5 331#endif
a15cef0c 332#ifndef PerlIO_getname
333extern char * PerlIO_getname (PerlIO *, char *);
334#endif
76ced9ad 335
13621cfb 336extern void PerlIO_destruct(pTHX);
337
11ae941d 338#ifndef PERLIO_IS_STDIO
339
64e30646 340extern void PerlIO_cleanup(void);
adb71456 341
88b61e10 342extern void PerlIO_debug(const char *fmt,...);
343
11ae941d 344#endif
345
adb71456 346END_EXTERN_C
347
76ced9ad 348#endif /* _PERLIO_H */