Commit | Line | Data |
f1387719 |
1 | BEGIN {require 5.002;} # MakeMaker 5.17 was the last MakeMaker that was compatible with perl5.001m |
a0d0e21e |
2 | |
e05e23b1 |
3 | package ExtUtils::MakeMaker; |
4 | |
ccd13d1e |
5 | $Version = $VERSION = "5.36"; |
f1387719 |
6 | $Version_OK = "5.17"; # Makefiles older than $Version_OK will die |
8e07c86e |
7 | # (Will be checked from MakeMaker version 4.13 onwards) |
ccd13d1e |
8 | ($Revision = substr(q$Revision: 1.206 $, 10)) =~ s/\s+$//; |
e05e23b1 |
9 | |
10 | |
005c1a0e |
11 | |
8e07c86e |
12 | require Exporter; |
3b03c0f3 |
13 | use Config; |
14 | use Carp (); |
15 | #use FileHandle (); |
e05e23b1 |
16 | |
17 | use vars qw( |
f1387719 |
18 | |
19 | @ISA @EXPORT @EXPORT_OK $AUTOLOAD |
20 | $ISA_TTY $Is_Mac $Is_OS2 $Is_VMS $Revision $Setup_done |
21 | $VERSION $Verbose $Version_OK %Config %Keep_after_flush |
22 | %MM_Sections %Prepend_dot_dot %Recognized_Att_Keys |
23 | @Get_from_Config @MM_Sections @Overridable @Parent |
24 | |
e05e23b1 |
25 | ); |
f1387719 |
26 | # use strict; |
005c1a0e |
27 | |
760ac839 |
28 | # &DynaLoader::mod2fname should be available to miniperl, thus |
29 | # should be a pseudo-builtin (cmp. os2.c). |
30 | #eval {require DynaLoader;}; |
005c1a0e |
31 | |
e05e23b1 |
32 | # |
33 | # Set up the inheritance before we pull in the MM_* packages, because they |
34 | # import variables and functions from here |
35 | # |
36 | @ISA = qw(Exporter); |
37 | @EXPORT = qw(&WriteMakefile &writeMakefile $Verbose &prompt); |
3b03c0f3 |
38 | @EXPORT_OK = qw($VERSION &Version_check &neatvalue &mkbootstrap &mksymlists |
f1387719 |
39 | $Version); |
e05e23b1 |
40 | # $Version in mixed case will go away! |
005c1a0e |
41 | |
e05e23b1 |
42 | # |
43 | # Dummy package MM inherits actual methods from OS-specific |
44 | # default packages. We use this intermediate package so |
45 | # MY::XYZ->func() can call MM->func() and get the proper |
46 | # default routine without having to know under what OS |
47 | # it's running. |
48 | # |
49 | @MM::ISA = qw[ExtUtils::MM_Unix ExtUtils::Liblist ExtUtils::MakeMaker]; |
42793c05 |
50 | |
e05e23b1 |
51 | # |
52 | # Setup dummy package: |
53 | # MY exists for overriding methods to be defined within |
54 | # |
55 | { |
56 | package MY; |
f1387719 |
57 | @MY::ISA = qw(MM); |
58 | ### sub AUTOLOAD { use Devel::Symdump; print Devel::Symdump->rnew->as_string; Carp::confess "hey why? $AUTOLOAD" } |
e05e23b1 |
59 | package MM; |
e05e23b1 |
60 | sub DESTROY {} |
61 | } |
42793c05 |
62 | |
3b03c0f3 |
63 | # "predeclare the package: we only load it via AUTOLOAD |
64 | # but we have already mentioned it in @ISA |
65 | package ExtUtils::Liblist; |
66 | |
67 | package ExtUtils::MakeMaker; |
e05e23b1 |
68 | # |
a5f75d66 |
69 | # Now we can can pull in the friends |
e05e23b1 |
70 | # |
3b03c0f3 |
71 | $Is_VMS = $^O eq 'VMS'; |
f1387719 |
72 | $Is_OS2 = $^O =~ m|^os/?2$|i; |
73 | $Is_Mac = $^O eq 'MacOS'; |
a5f75d66 |
74 | |
e05e23b1 |
75 | require ExtUtils::MM_Unix; |
3b03c0f3 |
76 | |
a5f75d66 |
77 | if ($Is_VMS) { |
0d8023a2 |
78 | require ExtUtils::MM_VMS; |
f1387719 |
79 | require VMS::Filespec; # is a noop as long as we require it within MM_VMS |
0d8023a2 |
80 | } |
a5f75d66 |
81 | if ($Is_OS2) { |
e05e23b1 |
82 | require ExtUtils::MM_OS2; |
83 | } |
f1387719 |
84 | if ($Is_Mac) { |
85 | require ExtUtils::MM_Mac; |
86 | } |
3b03c0f3 |
87 | |
88 | # The SelfLoader would bring a lot of overhead for MakeMaker, because |
89 | # we know for sure we will use most of the autoloaded functions once |
90 | # we have to use one of them. So we write our own loader |
91 | |
92 | sub AUTOLOAD { |
93 | my $code; |
94 | if (defined fileno(DATA)) { |
f1387719 |
95 | my $fh = select DATA; |
96 | my $o = $/; # For future reads from the file. |
97 | $/ = "\n__END__\n"; |
98 | $code = <DATA>; |
99 | $/ = $o; |
100 | select $fh; |
3b03c0f3 |
101 | close DATA; |
102 | eval $code; |
103 | if ($@) { |
104 | $@ =~ s/ at .*\n//; |
105 | Carp::croak $@; |
106 | } |
107 | } else { |
108 | warn "AUTOLOAD called unexpectedly for $AUTOLOAD"; |
109 | } |
110 | defined(&$AUTOLOAD) or die "Myloader inconsistency error"; |
111 | goto &$AUTOLOAD; |
112 | } |
864a5fa8 |
113 | |
e05e23b1 |
114 | # The only subroutine we do not SelfLoad is Version_Check because it's |
115 | # called so often. Loading this minimum still requires 1.2 secs on my |
116 | # Indy :-( |
e05e23b1 |
117 | |
118 | sub Version_check { |
119 | my($checkversion) = @_; |
120 | die "Your Makefile was built with ExtUtils::MakeMaker v $checkversion. |
121 | Current Version is $ExtUtils::MakeMaker::VERSION. There have been considerable |
122 | changes in the meantime. |
123 | Please rerun 'perl Makefile.PL' to regenerate the Makefile.\n" |
124 | if $checkversion < $Version_OK; |
125 | printf STDOUT "%s %s %s %s.\n", "Makefile built with ExtUtils::MakeMaker v", |
126 | $checkversion, "Current Version is", $VERSION |
127 | unless $checkversion == $VERSION; |
8e07c86e |
128 | } |
e05e23b1 |
129 | |
f1387719 |
130 | sub warnhandler { |
131 | $_[0] =~ /^Use of uninitialized value/ && return; |
132 | $_[0] =~ /used only once/ && return; |
133 | $_[0] =~ /^Subroutine\s+[\w:]+\s+redefined/ && return; |
134 | warn @_; |
135 | } |
136 | |
3b03c0f3 |
137 | sub ExtUtils::MakeMaker::eval_in_subdirs ; |
138 | sub ExtUtils::MakeMaker::eval_in_x ; |
139 | sub ExtUtils::MakeMaker::full_setup ; |
140 | sub ExtUtils::MakeMaker::writeMakefile ; |
141 | sub ExtUtils::MakeMaker::new ; |
142 | sub ExtUtils::MakeMaker::check_manifest ; |
143 | sub ExtUtils::MakeMaker::parse_args ; |
144 | sub ExtUtils::MakeMaker::check_hints ; |
145 | sub ExtUtils::MakeMaker::mv_all_methods ; |
146 | sub ExtUtils::MakeMaker::skipcheck ; |
147 | sub ExtUtils::MakeMaker::flush ; |
148 | sub ExtUtils::MakeMaker::mkbootstrap ; |
149 | sub ExtUtils::MakeMaker::mksymlists ; |
150 | sub ExtUtils::MakeMaker::neatvalue ; |
151 | sub ExtUtils::MakeMaker::selfdocument ; |
152 | sub ExtUtils::MakeMaker::WriteMakefile ; |
153 | sub ExtUtils::MakeMaker::prompt ; |
f1387719 |
154 | |
155 | 1; |
ccd13d1e |
156 | |
157 | __DATA__ |
158 | |
3b03c0f3 |
159 | package ExtUtils::MakeMaker; |
160 | |
161 | sub WriteMakefile { |
162 | Carp::croak "WriteMakefile: Need even number of args" if @_ % 2; |
f1387719 |
163 | local $SIG{__WARN__} = \&warnhandler; |
164 | |
3b03c0f3 |
165 | unless ($Setup_done++){ |
166 | full_setup(); |
167 | undef &ExtUtils::MakeMaker::full_setup; #safe memory |
168 | } |
169 | my %att = @_; |
170 | MM->new(\%att)->flush; |
171 | } |
172 | |
f1387719 |
173 | sub prompt ($;$) { |
3b03c0f3 |
174 | my($mess,$def)=@_; |
175 | $ISA_TTY = -t STDIN && -t STDOUT ; |
176 | Carp::confess("prompt function called without an argument") unless defined $mess; |
f1387719 |
177 | my $dispdef = defined $def ? "[$def] " : " "; |
178 | $def = defined $def ? $def : ""; |
3b03c0f3 |
179 | my $ans; |
180 | if ($ISA_TTY) { |
181 | local $|=1; |
182 | print "$mess $dispdef"; |
f1387719 |
183 | chomp($ans = <STDIN>); |
3b03c0f3 |
184 | } |
f1387719 |
185 | return $ans || $def; |
3b03c0f3 |
186 | } |
187 | |
e05e23b1 |
188 | sub eval_in_subdirs { |
189 | my($self) = @_; |
190 | my($dir); |
3b03c0f3 |
191 | use Cwd 'cwd'; |
e05e23b1 |
192 | my $pwd = cwd(); |
193 | |
e05e23b1 |
194 | foreach $dir (@{$self->{DIR}}){ |
e05e23b1 |
195 | my($abs) = $self->catdir($pwd,$dir); |
196 | $self->eval_in_x($abs); |
197 | } |
e05e23b1 |
198 | chdir $pwd; |
864a5fa8 |
199 | } |
42793c05 |
200 | |
e05e23b1 |
201 | sub eval_in_x { |
202 | my($self,$dir) = @_; |
203 | package main; |
3b03c0f3 |
204 | chdir $dir or Carp::carp("Couldn't change to directory $dir: $!"); |
205 | # use FileHandle (); |
206 | # my $fh = new FileHandle; |
207 | # $fh->open("Makefile.PL") or Carp::carp("Couldn't open Makefile.PL in $dir"); |
208 | local *FH; |
209 | open(FH,"Makefile.PL") or Carp::carp("Couldn't open Makefile.PL in $dir"); |
210 | # my $eval = join "", <$fh>; |
211 | my $eval = join "", <FH>; |
212 | # $fh->close; |
213 | close FH; |
e05e23b1 |
214 | eval $eval; |
f1387719 |
215 | if ($@) { |
216 | # if ($@ =~ /prerequisites/) { |
217 | # die "MakeMaker WARNING: $@"; |
218 | # } else { |
219 | # warn "WARNING from evaluation of $dir/Makefile.PL: $@"; |
220 | # } |
221 | warn "WARNING from evaluation of $dir/Makefile.PL: $@"; |
222 | } |
e05e23b1 |
223 | } |
224 | |
e05e23b1 |
225 | sub full_setup { |
226 | $Verbose ||= 0; |
227 | $^W=1; |
3b03c0f3 |
228 | |
f1387719 |
229 | # package name for the classes into which the first object will be blessed |
3b03c0f3 |
230 | $PACKNAME = "PACK000"; |
231 | |
232 | @Attrib_help = qw/ |
233 | |
234 | C CONFIG CONFIGURE DEFINE DIR DISTNAME DL_FUNCS DL_VARS EXE_FILES |
f1387719 |
235 | EXCLUDE_EXT INCLUDE_EXT NO_VC FIRST_MAKEFILE FULLPERL H INC |
236 | INSTALLARCHLIB INSTALLBIN INSTALLDIRS INSTALLMAN1DIR |
237 | INSTALLMAN3DIR INSTALLPRIVLIB INSTALLSCRIPT INSTALLSITEARCH |
238 | INSTALLSITELIB INST_ARCHLIB INST_BIN INST_EXE INST_LIB |
239 | INST_MAN1DIR INST_MAN3DIR INST_SCRIPT LDFROM LIBPERL_A LIBS |
240 | LINKTYPE MAKEAPERL MAKEFILE MAN1PODS MAN3PODS MAP_TARGET MYEXTLIB |
241 | NAME NEEDS_LINKING NOECHO NORECURS OBJECT OPTIMIZE PERL PERLMAINCC |
242 | PERL_ARCHLIB PERL_LIB PERL_SRC PL_FILES PM PMLIBDIRS PREFIX |
243 | PREREQ_PM SKIP TYPEMAPS VERSION VERSION_FROM XS XSOPT XSPROTOARG |
244 | XS_VERSION clean depend dist dynamic_lib linkext macro realclean |
245 | tool_autosplit |
3b03c0f3 |
246 | |
247 | installpm |
248 | |
249 | /; |
250 | |
f1387719 |
251 | # ^^^ installpm is deprecated, will go about Summer 96 |
252 | |
253 | # @Overridable is close to @MM_Sections but not identical. The |
254 | # order is important. Many subroutines declare macros. These |
255 | # depend on each other. Let's try to collect the macros up front, |
256 | # then pasthru, then the rules. |
257 | |
258 | # MM_Sections are the sections we have to call explicitly |
259 | # in Overridable we have subroutines that are used indirectly |
3b03c0f3 |
260 | |
e05e23b1 |
261 | |
262 | @MM_Sections = |
263 | qw( |
3b03c0f3 |
264 | |
f1387719 |
265 | post_initialize const_config constants tool_autosplit tool_xsubpp |
266 | tools_other dist macro depend cflags const_loadlibs const_cccmd |
267 | post_constants |
268 | |
269 | pasthru |
270 | |
271 | c_o xs_c xs_o top_targets linkext dlsyms dynamic dynamic_bs |
272 | dynamic_lib static static_lib manifypods processPL installbin subdirs |
273 | clean realclean dist_basics dist_core dist_dir dist_test dist_ci |
274 | install force perldepend makefile staticmake test |
3b03c0f3 |
275 | |
e05e23b1 |
276 | ); # loses section ordering |
277 | |
3b03c0f3 |
278 | @Overridable = @MM_Sections; |
f1387719 |
279 | push @Overridable, qw[ |
280 | |
281 | dir_target libscan makeaperl needs_linking subdir_x test_via_harness |
282 | test_via_script |
283 | |
3b03c0f3 |
284 | ]; |
285 | |
f1387719 |
286 | push @MM_Sections, qw[ |
3b03c0f3 |
287 | |
f1387719 |
288 | pm_to_blib selfdocument |
289 | |
290 | ]; |
291 | |
292 | # Postamble needs to be the last that was always the case |
293 | push @MM_Sections, "postamble"; |
294 | push @Overridable, "postamble"; |
e05e23b1 |
295 | |
296 | # All sections are valid keys. |
3b03c0f3 |
297 | @Recognized_Att_Keys{@MM_Sections} = (1) x @MM_Sections; |
e05e23b1 |
298 | |
299 | # we will use all these variables in the Makefile |
300 | @Get_from_Config = |
301 | qw( |
302 | ar cc cccdlflags ccdlflags dlext dlsrc ld lddlflags ldflags libc |
ccd13d1e |
303 | lib_ext mab obj_ext ranlib sitelibexp sitearchexp so |
e05e23b1 |
304 | ); |
305 | |
306 | my $item; |
3b03c0f3 |
307 | foreach $item (@Attrib_help){ |
308 | $Recognized_Att_Keys{$item} = 1; |
e05e23b1 |
309 | } |
310 | foreach $item (@Get_from_Config) { |
311 | $Recognized_Att_Keys{uc $item} = $Config{$item}; |
312 | print "Attribute '\U$item\E' => '$Config{$item}'\n" |
313 | if ($Verbose >= 2); |
314 | } |
315 | |
316 | # |
3b03c0f3 |
317 | # When we eval a Makefile.PL in a subdirectory, that one will ask |
318 | # us (the parent) for the values and will prepend "..", so that |
319 | # all files to be installed end up below OUR ./blib |
e05e23b1 |
320 | # |
321 | %Prepend_dot_dot = |
322 | qw( |
f1387719 |
323 | |
324 | INST_BIN 1 INST_EXE 1 INST_LIB 1 INST_ARCHLIB 1 INST_SCRIPT |
325 | 1 MAP_TARGET 1 INST_MAN1DIR 1 INST_MAN3DIR 1 PERL_SRC 1 |
326 | PERL 1 FULLPERL 1 |
327 | |
e05e23b1 |
328 | ); |
329 | |
3b03c0f3 |
330 | my @keep = qw/ |
331 | NEEDS_LINKING HAS_LINK_CODE |
332 | /; |
333 | @Keep_after_flush{@keep} = (1) x @keep; |
e05e23b1 |
334 | } |
42793c05 |
335 | |
8e07c86e |
336 | sub writeMakefile { |
337 | die <<END; |
232e078e |
338 | |
8e07c86e |
339 | The extension you are trying to build apparently is rather old and |
340 | most probably outdated. We detect that from the fact, that a |
341 | subroutine "writeMakefile" is called, and this subroutine is not |
342 | supported anymore since about October 1994. |
40000a8c |
343 | |
4633a7c4 |
344 | Please contact the author or look into CPAN (details about CPAN can be |
345 | found in the FAQ and at http:/www.perl.com) for a more recent version |
346 | of the extension. If you're really desperate, you can try to change |
347 | the subroutine name from writeMakefile to WriteMakefile and rerun |
348 | 'perl Makefile.PL', but you're most probably left alone, when you do |
349 | so. |
42793c05 |
350 | |
8e07c86e |
351 | The MakeMaker team |
1aef975c |
352 | |
42793c05 |
353 | END |
8e07c86e |
354 | } |
42793c05 |
355 | |
3b03c0f3 |
356 | sub ExtUtils::MakeMaker::new { |
8e07c86e |
357 | my($class,$self) = @_; |
358 | my($key); |
42793c05 |
359 | |
e05e23b1 |
360 | print STDOUT "MakeMaker (v$VERSION)\n" if $Verbose; |
8e07c86e |
361 | if (-f "MANIFEST" && ! -f "Makefile"){ |
362 | check_manifest(); |
1aef975c |
363 | } |
42793c05 |
364 | |
8e07c86e |
365 | $self = {} unless (defined $self); |
005c1a0e |
366 | |
864a5fa8 |
367 | check_hints($self); |
4633a7c4 |
368 | |
8e07c86e |
369 | my(%initial_att) = %$self; # record initial attributes |
005c1a0e |
370 | |
f1387719 |
371 | my($prereq); |
372 | foreach $prereq (sort keys %{$self->{PREREQ_PM}}) { |
373 | my $eval = "use $prereq $self->{PREREQ_PM}->{$prereq}"; |
374 | eval $eval; |
375 | if ($@){ |
376 | warn "Warning: prerequisite $prereq $self->{PREREQ_PM}->{$prereq} not found"; |
377 | } else { |
378 | delete $self->{PREREQ_PM}{$prereq}; |
379 | } |
380 | } |
381 | # if (@unsatisfied){ |
382 | # unless (defined $ExtUtils::MakeMaker::useCPAN) { |
383 | # print qq{MakeMaker WARNING: prerequisites not found (@unsatisfied) |
384 | # Please install these modules first and rerun 'perl Makefile.PL'.\n}; |
385 | # if ($ExtUtils::MakeMaker::hasCPAN) { |
386 | # $ExtUtils::MakeMaker::useCPAN = prompt(qq{Should I try to use the CPAN module to fetch them for you?},"yes"); |
387 | # } else { |
388 | # print qq{Hint: You may want to install the CPAN module to autofetch the needed modules\n}; |
389 | # $ExtUtils::MakeMaker::useCPAN=0; |
390 | # } |
391 | # } |
392 | # if ($ExtUtils::MakeMaker::useCPAN) { |
393 | # require CPAN; |
394 | # CPAN->import(@unsatisfied); |
395 | # } else { |
396 | # die qq{prerequisites not found (@unsatisfied)}; |
397 | # } |
398 | # warn qq{WARNING: prerequisites not found (@unsatisfied)}; |
399 | # } |
400 | |
8e07c86e |
401 | if (defined $self->{CONFIGURE}) { |
402 | if (ref $self->{CONFIGURE} eq 'CODE') { |
403 | $self = { %$self, %{&{$self->{CONFIGURE}}}}; |
005c1a0e |
404 | } else { |
3b03c0f3 |
405 | Carp::croak "Attribute 'CONFIGURE' to WriteMakefile() not a code reference\n"; |
005c1a0e |
406 | } |
407 | } |
a0d0e21e |
408 | |
8e07c86e |
409 | # This is for old Makefiles written pre 5.00, will go away |
410 | if ( Carp::longmess("") =~ /runsubdirpl/s ){ |
e05e23b1 |
411 | #$self->{Correct_relativ_directories}++; |
3b03c0f3 |
412 | Carp::carp("WARNING: Please rerun 'perl Makefile.PL' to regenerate your Makefiles\n"); |
8e07c86e |
413 | } else { |
414 | $self->{Correct_relativ_directories}=0; |
415 | } |
5d94fbed |
416 | |
ccd13d1e |
417 | my $newclass = ++$PACKNAME; |
8e07c86e |
418 | { |
419 | # no strict; |
ccd13d1e |
420 | print "Blessing Object into class [$newclass]\n" if $Verbose>=2; |
421 | mv_all_methods("MY",$newclass); |
422 | bless $self, $newclass; |
e05e23b1 |
423 | push @Parent, $self; |
ccd13d1e |
424 | @{"$newclass\:\:ISA"} = 'MM'; |
8e07c86e |
425 | } |
5d94fbed |
426 | |
e05e23b1 |
427 | if (defined $Parent[-2]){ |
428 | $self->{PARENT} = $Parent[-2]; |
8e07c86e |
429 | my $key; |
e05e23b1 |
430 | for $key (keys %Prepend_dot_dot) { |
4633a7c4 |
431 | next unless defined $self->{PARENT}{$key}; |
8e07c86e |
432 | $self->{$key} = $self->{PARENT}{$key}; |
433 | $self->{$key} = $self->catdir("..",$self->{$key}) |
3b03c0f3 |
434 | unless $self->file_name_is_absolute($self->{$key}); |
8e07c86e |
435 | } |
ccd13d1e |
436 | $self->{PARENT}->{CHILDREN}->{$newclass} = $self if $self->{PARENT}; |
8e07c86e |
437 | } else { |
438 | parse_args($self,@ARGV); |
439 | } |
a0d0e21e |
440 | |
8e07c86e |
441 | $self->{NAME} ||= $self->guess_name; |
a0d0e21e |
442 | |
8e07c86e |
443 | ($self->{NAME_SYM} = $self->{NAME}) =~ s/\W+/_/g; |
a0d0e21e |
444 | |
8e07c86e |
445 | $self->init_main(); |
446 | |
0d8023a2 |
447 | if (! $self->{PERL_SRC} ) { |
448 | my($pthinks) = $INC{'Config.pm'}; |
3b03c0f3 |
449 | $pthinks = VMS::Filespec::vmsify($pthinks) if $Is_VMS; |
e05e23b1 |
450 | if ($pthinks ne $self->catfile($Config{archlibexp},'Config.pm')){ |
0d8023a2 |
451 | $pthinks =~ s!/Config\.pm$!!; |
452 | $pthinks =~ s!.*/!!; |
453 | print STDOUT <<END; |
005c1a0e |
454 | Your perl and your Config.pm seem to have different ideas about the architecture |
455 | they are running on. |
8e07c86e |
456 | Perl thinks: [$pthinks] |
e05e23b1 |
457 | Config says: [$Config{archname}] |
005c1a0e |
458 | This may or may not cause problems. Please check your installation of perl if you |
459 | have problems building this extension. |
460 | END |
0d8023a2 |
461 | } |
005c1a0e |
462 | } |
463 | |
8e07c86e |
464 | $self->init_dirscan(); |
465 | $self->init_others(); |
75f92628 |
466 | |
8e07c86e |
467 | push @{$self->{RESULT}}, <<END; |
468 | # This Makefile is for the $self->{NAME} extension to perl. |
469 | # |
e05e23b1 |
470 | # It was generated automatically by MakeMaker version |
471 | # $VERSION (Revision: $Revision) from the contents of |
472 | # Makefile.PL. Don't edit this file, edit Makefile.PL instead. |
8e07c86e |
473 | # |
474 | # ANY CHANGES MADE HERE WILL BE LOST! |
475 | # |
476 | # MakeMaker Parameters: |
477 | END |
a0d0e21e |
478 | |
42793c05 |
479 | foreach $key (sort keys %initial_att){ |
480 | my($v) = neatvalue($initial_att{$key}); |
8e07c86e |
481 | $v =~ s/(CODE|HASH|ARRAY|SCALAR)\([\dxa-f]+\)/$1\(...\)/; |
42793c05 |
482 | $v =~ tr/\n/ /s; |
8e07c86e |
483 | push @{$self->{RESULT}}, "# $key => $v"; |
42793c05 |
484 | } |
a0d0e21e |
485 | |
8e07c86e |
486 | # turn the SKIP array into a SKIPHASH hash |
487 | my (%skip,$skip); |
488 | for $skip (@{$self->{SKIP} || []}) { |
489 | $self->{SKIPHASH}{$skip} = 1; |
490 | } |
3b03c0f3 |
491 | delete $self->{SKIP}; # free memory |
492 | |
493 | if ($self->{PARENT}) { |
494 | for (qw/install dist dist_basics dist_core dist_dir dist_test dist_ci/) { |
495 | $self->{SKIPHASH}{$_} = 1; |
496 | } |
497 | } |
42793c05 |
498 | |
8e07c86e |
499 | # We run all the subdirectories now. They don't have much to query |
500 | # from the parent, but the parent has to query them: if they need linking! |
8e07c86e |
501 | unless ($self->{NORECURS}) { |
e05e23b1 |
502 | $self->eval_in_subdirs if @{$self->{DIR}}; |
42793c05 |
503 | } |
a0d0e21e |
504 | |
8e07c86e |
505 | my $section; |
e05e23b1 |
506 | foreach $section ( @MM_Sections ){ |
507 | print "Processing Makefile '$section' section\n" if ($Verbose >= 2); |
8e07c86e |
508 | my($skipit) = $self->skipcheck($section); |
509 | if ($skipit){ |
510 | push @{$self->{RESULT}}, "\n# --- MakeMaker $section section $skipit."; |
4e68a208 |
511 | } else { |
8e07c86e |
512 | my(%a) = %{$self->{$section} || {}}; |
513 | push @{$self->{RESULT}}, "\n# --- MakeMaker $section section:"; |
e05e23b1 |
514 | push @{$self->{RESULT}}, "# " . join ", ", %a if $Verbose && %a; |
8e07c86e |
515 | push @{$self->{RESULT}}, $self->nicetext($self->$section( %a )); |
e05e23b1 |
516 | } |
232e078e |
517 | } |
8e07c86e |
518 | |
e05e23b1 |
519 | push @{$self->{RESULT}}, "\n# End."; |
520 | pop @Parent; |
8e07c86e |
521 | |
e05e23b1 |
522 | $self; |
232e078e |
523 | } |
524 | |
e05e23b1 |
525 | sub check_manifest { |
526 | print STDOUT "Checking if your kit is complete...\n"; |
3b03c0f3 |
527 | require ExtUtils::Manifest; |
e05e23b1 |
528 | $ExtUtils::Manifest::Quiet=$ExtUtils::Manifest::Quiet=1; #avoid warning |
529 | my(@missed)=ExtUtils::Manifest::manicheck(); |
530 | if (@missed){ |
531 | print STDOUT "Warning: the following files are missing in your kit:\n"; |
532 | print "\t", join "\n\t", @missed; |
533 | print STDOUT "\n"; |
534 | print STDOUT "Please inform the author.\n"; |
8e07c86e |
535 | } else { |
e05e23b1 |
536 | print STDOUT "Looks good\n"; |
8e07c86e |
537 | } |
8e07c86e |
538 | } |
539 | |
e05e23b1 |
540 | sub parse_args{ |
541 | my($self, @args) = @_; |
542 | foreach (@args){ |
543 | unless (m/(.*?)=(.*)/){ |
544 | help(),exit 1 if m/^help$/; |
545 | ++$Verbose if m/^verb/; |
546 | next; |
547 | } |
548 | my($name, $value) = ($1, $2); |
549 | if ($value =~ m/^~(\w+)?/){ # tilde with optional username |
550 | $value =~ s [^~(\w*)] |
551 | [$1 ? |
552 | ((getpwnam($1))[7] || "~$1") : |
553 | (getpwuid($>))[7] |
554 | ]ex; |
555 | } |
556 | # This may go away, in mid 1996 |
557 | if ($self->{Correct_relativ_directories}){ |
558 | $value = $self->catdir("..",$value) |
3b03c0f3 |
559 | if $Prepend_dot_dot{$name} && ! $self->file_name_is_absolute($value); |
e05e23b1 |
560 | } |
a5f75d66 |
561 | $self->{uc($name)} = $value; |
8e07c86e |
562 | } |
e05e23b1 |
563 | # This may go away, in mid 1996 |
564 | delete $self->{Correct_relativ_directories}; |
8e07c86e |
565 | |
e05e23b1 |
566 | # catch old-style 'potential_libs' and inform user how to 'upgrade' |
567 | if (defined $self->{potential_libs}){ |
568 | my($msg)="'potential_libs' => '$self->{potential_libs}' should be"; |
569 | if ($self->{potential_libs}){ |
570 | print STDOUT "$msg changed to:\n\t'LIBS' => ['$self->{potential_libs}']\n"; |
571 | } else { |
572 | print STDOUT "$msg deleted.\n"; |
573 | } |
574 | $self->{LIBS} = [$self->{potential_libs}]; |
575 | delete $self->{potential_libs}; |
8e07c86e |
576 | } |
e05e23b1 |
577 | # catch old-style 'ARMAYBE' and inform user how to 'upgrade' |
578 | if (defined $self->{ARMAYBE}){ |
579 | my($armaybe) = $self->{ARMAYBE}; |
580 | print STDOUT "ARMAYBE => '$armaybe' should be changed to:\n", |
581 | "\t'dynamic_lib' => {ARMAYBE => '$armaybe'}\n"; |
582 | my(%dl) = %{$self->{dynamic_lib} || {}}; |
583 | $self->{dynamic_lib} = { %dl, ARMAYBE => $armaybe}; |
584 | delete $self->{ARMAYBE}; |
8e07c86e |
585 | } |
e05e23b1 |
586 | if (defined $self->{LDTARGET}){ |
587 | print STDOUT "LDTARGET should be changed to LDFROM\n"; |
588 | $self->{LDFROM} = $self->{LDTARGET}; |
589 | delete $self->{LDTARGET}; |
8e07c86e |
590 | } |
e05e23b1 |
591 | # Turn a DIR argument on the command line into an array |
592 | if (defined $self->{DIR} && ref \$self->{DIR} eq 'SCALAR') { |
593 | # So they can choose from the command line, which extensions they want |
594 | # the grep enables them to have some colons too much in case they |
595 | # have to build a list with the shell |
596 | $self->{DIR} = [grep $_, split ":", $self->{DIR}]; |
8e07c86e |
597 | } |
f1387719 |
598 | # Turn a INCLUDE_EXT argument on the command line into an array |
599 | if (defined $self->{INCLUDE_EXT} && ref \$self->{INCLUDE_EXT} eq 'SCALAR') { |
600 | $self->{INCLUDE_EXT} = [grep $_, split '\s+', $self->{INCLUDE_EXT}]; |
601 | } |
602 | # Turn a EXCLUDE_EXT argument on the command line into an array |
603 | if (defined $self->{EXCLUDE_EXT} && ref \$self->{EXCLUDE_EXT} eq 'SCALAR') { |
604 | $self->{EXCLUDE_EXT} = [grep $_, split '\s+', $self->{EXCLUDE_EXT}]; |
605 | } |
e05e23b1 |
606 | my $mmkey; |
607 | foreach $mmkey (sort keys %$self){ |
608 | print STDOUT " $mmkey => ", neatvalue($self->{$mmkey}), "\n" if $Verbose; |
609 | print STDOUT "'$mmkey' is not a known MakeMaker parameter name.\n" |
610 | unless exists $Recognized_Att_Keys{$mmkey}; |
611 | } |
f1387719 |
612 | $| = 1 if $Verbose; |
e05e23b1 |
613 | } |
8e07c86e |
614 | |
e05e23b1 |
615 | sub check_hints { |
616 | my($self) = @_; |
617 | # We allow extension-specific hints files. |
864a5fa8 |
618 | |
e05e23b1 |
619 | return unless -d "hints"; |
8e07c86e |
620 | |
e05e23b1 |
621 | # First we look for the best hintsfile we have |
622 | my(@goodhints); |
f1387719 |
623 | my($hint)="${^O}_$Config{osvers}"; |
e05e23b1 |
624 | $hint =~ s/\./_/g; |
625 | $hint =~ s/_$//; |
626 | return unless $hint; |
fed7345c |
627 | |
e05e23b1 |
628 | # Also try without trailing minor version numbers. |
629 | while (1) { |
630 | last if -f "hints/$hint.pl"; # found |
631 | } continue { |
632 | last unless $hint =~ s/_[^_]*$//; # nothing to cut off |
633 | } |
634 | return unless -f "hints/$hint.pl"; # really there |
fed7345c |
635 | |
e05e23b1 |
636 | # execute the hintsfile: |
3b03c0f3 |
637 | # use FileHandle (); |
638 | # my $fh = new FileHandle; |
639 | # $fh->open("hints/$hint.pl"); |
640 | local *FH; |
641 | open(FH,"hints/$hint.pl"); |
642 | # @goodhints = <$fh>; |
643 | @goodhints = <FH>; |
644 | # $fh->close; |
645 | close FH; |
e05e23b1 |
646 | print STDOUT "Processing hints file hints/$hint.pl\n"; |
647 | eval join('',@goodhints); |
648 | print STDOUT $@ if $@; |
649 | } |
8e07c86e |
650 | |
e05e23b1 |
651 | sub mv_all_methods { |
652 | my($from,$to) = @_; |
653 | my($method); |
654 | my($symtab) = \%{"${from}::"}; |
655 | # no strict; |
fed7345c |
656 | |
e05e23b1 |
657 | # Here you see the *current* list of methods that are overridable |
658 | # from Makefile.PL via MY:: subroutines. As of VERSION 5.07 I'm |
659 | # still trying to reduce the list to some reasonable minimum -- |
660 | # because I want to make it easier for the user. A.K. |
40000a8c |
661 | |
3b03c0f3 |
662 | foreach $method (@Overridable) { |
fed7345c |
663 | |
e05e23b1 |
664 | # We cannot say "next" here. Nick might call MY->makeaperl |
665 | # which isn't defined right now |
fed7345c |
666 | |
3b03c0f3 |
667 | # Above statement was written at 4.23 time when Tk-b8 was |
668 | # around. As Tk-b9 only builds with 5.002something and MM 5 is |
669 | # standard, we try to enable the next line again. It was |
670 | # commented out until MM 5.23 |
671 | |
672 | next unless defined &{"${from}::$method"}; |
fed7345c |
673 | |
e05e23b1 |
674 | *{"${to}::$method"} = \&{"${from}::$method"}; |
8e07c86e |
675 | |
e05e23b1 |
676 | # delete would do, if we were sure, nobody ever called |
677 | # MY->makeaperl directly |
3b03c0f3 |
678 | |
e05e23b1 |
679 | # delete $symtab->{$method}; |
3b03c0f3 |
680 | |
e05e23b1 |
681 | # If we delete a method, then it will be undefined and cannot |
682 | # be called. But as long as we have Makefile.PLs that rely on |
683 | # %MY:: being intact, we have to fill the hole with an |
684 | # inheriting method: |
fed7345c |
685 | |
f1387719 |
686 | eval "package MY; sub $method { shift->SUPER::$method(\@_); }"; |
5d94fbed |
687 | } |
688 | |
e05e23b1 |
689 | # We have to clean out %INC also, because the current directory is |
690 | # changed frequently and Graham Barr prefers to get his version |
691 | # out of a History.pl file which is "required" so woudn't get |
692 | # loaded again in another extension requiring a History.pl |
a0d0e21e |
693 | |
f1387719 |
694 | # With perl5.002_01 the deletion of entries in %INC caused Tk-b11 |
695 | # to core dump in the middle of a require statement. The required |
696 | # file was Tk/MMutil.pm. The consequence is, we have to be |
697 | # extremely careful when we try to give perl a reason to reload a |
698 | # library with same name. The workaround prefers to drop nothing |
699 | # from %INC and teach the writers not to use such libraries. |
700 | |
701 | # my $inc; |
702 | # foreach $inc (keys %INC) { |
703 | # #warn "***$inc*** deleted"; |
704 | # delete $INC{$inc}; |
705 | # } |
8e07c86e |
706 | } |
707 | |
3b03c0f3 |
708 | sub skipcheck { |
8e07c86e |
709 | my($self) = shift; |
e05e23b1 |
710 | my($section) = @_; |
711 | if ($section eq 'dynamic') { |
712 | print STDOUT "Warning (non-fatal): Target 'dynamic' depends on targets ", |
713 | "in skipped section 'dynamic_bs'\n" |
714 | if $self->{SKIPHASH}{dynamic_bs} && $Verbose; |
715 | print STDOUT "Warning (non-fatal): Target 'dynamic' depends on targets ", |
716 | "in skipped section 'dynamic_lib'\n" |
717 | if $self->{SKIPHASH}{dynamic_lib} && $Verbose; |
8e07c86e |
718 | } |
e05e23b1 |
719 | if ($section eq 'dynamic_lib') { |
720 | print STDOUT "Warning (non-fatal): Target '\$(INST_DYNAMIC)' depends on ", |
721 | "targets in skipped section 'dynamic_bs'\n" |
722 | if $self->{SKIPHASH}{dynamic_bs} && $Verbose; |
723 | } |
724 | if ($section eq 'static') { |
725 | print STDOUT "Warning (non-fatal): Target 'static' depends on targets ", |
726 | "in skipped section 'static_lib'\n" |
727 | if $self->{SKIPHASH}{static_lib} && $Verbose; |
8e07c86e |
728 | } |
e05e23b1 |
729 | return 'skipped' if $self->{SKIPHASH}{$section}; |
730 | return ''; |
8e07c86e |
731 | } |
732 | |
e05e23b1 |
733 | sub flush { |
734 | my $self = shift; |
735 | my($chunk); |
3b03c0f3 |
736 | # use FileHandle (); |
737 | # my $fh = new FileHandle; |
738 | local *FH; |
e05e23b1 |
739 | print STDOUT "Writing $self->{MAKEFILE} for $self->{NAME}\n"; |
8e07c86e |
740 | |
e05e23b1 |
741 | unlink($self->{MAKEFILE}, "MakeMaker.tmp", $Is_VMS ? 'Descrip.MMS' : ''); |
3b03c0f3 |
742 | # $fh->open(">MakeMaker.tmp") or die "Unable to open MakeMaker.tmp: $!"; |
743 | open(FH,">MakeMaker.tmp") or die "Unable to open MakeMaker.tmp: $!"; |
8e07c86e |
744 | |
e05e23b1 |
745 | for $chunk (@{$self->{RESULT}}) { |
3b03c0f3 |
746 | # print $fh "$chunk\n"; |
747 | print FH "$chunk\n"; |
8e07c86e |
748 | } |
e05e23b1 |
749 | |
3b03c0f3 |
750 | # $fh->close; |
751 | close FH; |
e05e23b1 |
752 | my($finalname) = $self->{MAKEFILE}; |
753 | rename("MakeMaker.tmp", $finalname); |
754 | chmod 0644, $finalname unless $Is_VMS; |
3b03c0f3 |
755 | |
756 | if ($self->{PARENT}) { |
757 | foreach (keys %$self) { # safe memory |
758 | delete $self->{$_} unless $Keep_after_flush{$_}; |
759 | } |
760 | } |
761 | |
e05e23b1 |
762 | system("$Config::Config{eunicefix} $finalname") unless $Config::Config{eunicefix} eq ":"; |
40000a8c |
763 | } |
764 | |
e05e23b1 |
765 | # The following mkbootstrap() is only for installations that are calling |
766 | # the pre-4.1 mkbootstrap() from their old Makefiles. This MakeMaker |
767 | # writes Makefiles, that use ExtUtils::Mkbootstrap directly. |
768 | sub mkbootstrap { |
769 | die <<END; |
770 | !!! Your Makefile has been built such a long time ago, !!! |
771 | !!! that is unlikely to work with current MakeMaker. !!! |
772 | !!! Please rebuild your Makefile !!! |
773 | END |
8e07c86e |
774 | } |
005c1a0e |
775 | |
e05e23b1 |
776 | # Ditto for mksymlists() as of MakeMaker 5.17 |
777 | sub mksymlists { |
778 | die <<END; |
779 | !!! Your Makefile has been built such a long time ago, !!! |
780 | !!! that is unlikely to work with current MakeMaker. !!! |
781 | !!! Please rebuild your Makefile !!! |
782 | END |
4633a7c4 |
783 | } |
784 | |
e05e23b1 |
785 | sub neatvalue { |
786 | my($v) = @_; |
787 | return "undef" unless defined $v; |
788 | my($t) = ref $v; |
789 | return "q[$v]" unless $t; |
790 | if ($t eq 'ARRAY') { |
791 | my(@m, $elem, @neat); |
792 | push @m, "["; |
793 | foreach $elem (@$v) { |
794 | push @neat, "q[$elem]"; |
795 | } |
796 | push @m, join ", ", @neat; |
797 | push @m, "]"; |
798 | return join "", @m; |
799 | } |
800 | return "$v" unless $t eq 'HASH'; |
801 | my(@m, $key, $val); |
3b03c0f3 |
802 | while (($key,$val) = each %$v){ |
803 | last unless defined $key; # cautious programming in case (undef,undef) is true |
804 | push(@m,"$key=>".neatvalue($val)) ; |
805 | } |
e05e23b1 |
806 | return "{ ".join(', ',@m)." }"; |
4e68a208 |
807 | } |
808 | |
e05e23b1 |
809 | sub selfdocument { |
810 | my($self) = @_; |
811 | my(@m); |
812 | if ($Verbose){ |
813 | push @m, "\n# Full list of MakeMaker attribute values:"; |
814 | foreach $key (sort keys %$self){ |
815 | next if $key eq 'RESULT' || $key =~ /^[A-Z][a-z]/; |
816 | my($v) = neatvalue($self->{$key}); |
817 | $v =~ s/(CODE|HASH|ARRAY|SCALAR)\([\dxa-f]+\)/$1\(...\)/; |
818 | $v =~ tr/\n/ /s; |
819 | push @m, "# $key => $v"; |
820 | } |
821 | } |
822 | join "\n", @m; |
823 | } |
4e68a208 |
824 | |
3b03c0f3 |
825 | package ExtUtils::MakeMaker; |
826 | 1; |
827 | |
828 | __END__ |
005c1a0e |
829 | |
830 | =head1 NAME |
831 | |
832 | ExtUtils::MakeMaker - create an extension Makefile |
833 | |
834 | =head1 SYNOPSIS |
835 | |
836 | C<use ExtUtils::MakeMaker;> |
837 | |
838 | C<WriteMakefile( ATTRIBUTE =E<gt> VALUE [, ...] );> |
839 | |
8e07c86e |
840 | which is really |
841 | |
842 | C<MM-E<gt>new(\%att)-E<gt>flush;> |
843 | |
005c1a0e |
844 | =head1 DESCRIPTION |
845 | |
846 | This utility is designed to write a Makefile for an extension module |
847 | from a Makefile.PL. It is based on the Makefile.SH model provided by |
848 | Andy Dougherty and the perl5-porters. |
849 | |
850 | It splits the task of generating the Makefile into several subroutines |
851 | that can be individually overridden. Each subroutine returns the text |
852 | it wishes to have written to the Makefile. |
853 | |
f1387719 |
854 | MakeMaker is object oriented. Each directory below the current |
855 | directory that contains a Makefile.PL. Is treated as a separate |
856 | object. This makes it possible to write an unlimited number of |
857 | Makefiles with a single invocation of WriteMakefile(). |
8e07c86e |
858 | |
f1387719 |
859 | =head2 How To Write A Makefile.PL |
8e07c86e |
860 | |
f1387719 |
861 | The short answer is: Don't. Run h2xs(1) before you start thinking |
862 | about writing a module. For so called pm-only modules that consist of |
863 | C<*.pm> files only, h2xs has the very useful C<-X> switch. This will |
864 | generate dummy files of all kinds that are useful for the module |
865 | developer. |
8e07c86e |
866 | |
f1387719 |
867 | The medium answer is: |
8e07c86e |
868 | |
f1387719 |
869 | use ExtUtils::MakeMaker; |
870 | WriteMakefile( NAME => "Foo::Bar" ); |
8e07c86e |
871 | |
f1387719 |
872 | The long answer is below. |
005c1a0e |
873 | |
874 | =head2 Default Makefile Behaviour |
875 | |
f1387719 |
876 | The generated Makefile enables the user of the extension to invoke |
005c1a0e |
877 | |
878 | perl Makefile.PL # optionally "perl Makefile.PL verbose" |
879 | make |
8e07c86e |
880 | make test # optionally set TEST_VERBOSE=1 |
881 | make install # See below |
005c1a0e |
882 | |
883 | The Makefile to be produced may be altered by adding arguments of the |
e05e23b1 |
884 | form C<KEY=VALUE>. E.g. |
005c1a0e |
885 | |
e05e23b1 |
886 | perl Makefile.PL PREFIX=/tmp/myperl5 |
005c1a0e |
887 | |
888 | Other interesting targets in the generated Makefile are |
889 | |
890 | make config # to check if the Makefile is up-to-date |
8e07c86e |
891 | make clean # delete local temp files (Makefile gets renamed) |
892 | make realclean # delete derived files (including ./blib) |
e05e23b1 |
893 | make ci # check in all the files in the MANIFEST file |
005c1a0e |
894 | make dist # see below the Distribution Support section |
895 | |
e05e23b1 |
896 | =head2 make test |
897 | |
898 | MakeMaker checks for the existence of a file named "test.pl" in the |
899 | current directory and if it exists it adds commands to the test target |
900 | of the generated Makefile that will execute the script with the proper |
901 | set of perl C<-I> options. |
902 | |
903 | MakeMaker also checks for any files matching glob("t/*.t"). It will |
904 | add commands to the test target of the generated Makefile that execute |
905 | all matching files via the L<Test::Harness> module with the C<-I> |
906 | switches set correctly. |
907 | |
908 | =head2 make install |
005c1a0e |
909 | |
8e07c86e |
910 | make alone puts all relevant files into directories that are named by |
f1387719 |
911 | the macros INST_LIB, INST_ARCHLIB, INST_SCRIPT, INST_MAN1DIR, and |
912 | INST_MAN3DIR. All these default to something below ./blib if you are |
913 | I<not> building below the perl source directory. If you I<are> |
8e07c86e |
914 | building below the perl source, INST_LIB and INST_ARCHLIB default to |
f1387719 |
915 | ../../lib, and INST_SCRIPT is not defined. |
005c1a0e |
916 | |
e05e23b1 |
917 | The I<install> target of the generated Makefile copies the files found |
918 | below each of the INST_* directories to their INSTALL* |
919 | counterparts. Which counterparts are chosen depends on the setting of |
920 | INSTALLDIRS according to the following table: |
005c1a0e |
921 | |
e05e23b1 |
922 | INSTALLDIRS set to |
923 | perl site |
924 | |
e05e23b1 |
925 | INST_ARCHLIB INSTALLARCHLIB INSTALLSITEARCH |
3b03c0f3 |
926 | INST_LIB INSTALLPRIVLIB INSTALLSITELIB |
f1387719 |
927 | INST_BIN INSTALLBIN |
928 | INST_SCRIPT INSTALLSCRIPT |
e05e23b1 |
929 | INST_MAN1DIR INSTALLMAN1DIR |
930 | INST_MAN3DIR INSTALLMAN3DIR |
005c1a0e |
931 | |
8e07c86e |
932 | The INSTALL... macros in turn default to their %Config |
933 | ($Config{installprivlib}, $Config{installarchlib}, etc.) counterparts. |
005c1a0e |
934 | |
3b03c0f3 |
935 | You can check the values of these variables on your system with |
936 | |
937 | perl -MConfig -le 'print join $/, map |
938 | sprintf("%20s: %s", $_, $Config{$_}), |
939 | grep /^install/, keys %Config' |
940 | |
f1387719 |
941 | And to check the sequence in which the library directories are |
942 | searched by perl, run |
005c1a0e |
943 | |
f1387719 |
944 | perl -le 'print join $/, @INC' |
005c1a0e |
945 | |
005c1a0e |
946 | |
8e07c86e |
947 | =head2 PREFIX attribute |
005c1a0e |
948 | |
0d8023a2 |
949 | The PREFIX attribute can be used to set the INSTALL* attributes in one |
950 | go. The quickest way to install a module in a non-standard place |
005c1a0e |
951 | |
8e07c86e |
952 | perl Makefile.PL PREFIX=~ |
005c1a0e |
953 | |
0d8023a2 |
954 | This will replace the string specified by $Config{prefix} in all |
955 | $Config{install*} values. |
005c1a0e |
956 | |
957 | Note, that the tilde expansion is done by MakeMaker, not by perl by |
8e07c86e |
958 | default, nor by make. |
005c1a0e |
959 | |
005c1a0e |
960 | If the user has superuser privileges, and is not working on AFS |
961 | (Andrew File System) or relatives, then the defaults for |
f1387719 |
962 | INSTALLPRIVLIB, INSTALLARCHLIB, INSTALLSCRIPT, etc. will be appropriate, |
005c1a0e |
963 | and this incantation will be the best: |
964 | |
965 | perl Makefile.PL; make; make test |
966 | make install |
967 | |
8e07c86e |
968 | make install per default writes some documentation of what has been |
e05e23b1 |
969 | done into the file C<$(INSTALLARCHLIB)/perllocal.pod>. This feature |
970 | can be bypassed by calling make pure_install. |
8e07c86e |
971 | |
972 | =head2 AFS users |
973 | |
974 | will have to specify the installation directories as these most |
975 | probably have changed since perl itself has been installed. They will |
976 | have to do this by calling |
977 | |
e05e23b1 |
978 | perl Makefile.PL INSTALLSITELIB=/afs/here/today \ |
f1387719 |
979 | INSTALLSCRIPT=/afs/there/now INSTALLMAN3DIR=/afs/for/manpages |
8e07c86e |
980 | make |
981 | |
e05e23b1 |
982 | Be careful to repeat this procedure every time you recompile an |
983 | extension, unless you are sure the AFS installation directories are |
984 | still valid. |
005c1a0e |
985 | |
8e07c86e |
986 | =head2 Static Linking of a new Perl Binary |
005c1a0e |
987 | |
988 | An extension that is built with the above steps is ready to use on |
989 | systems supporting dynamic loading. On systems that do not support |
990 | dynamic loading, any newly created extension has to be linked together |
991 | with the available resources. MakeMaker supports the linking process |
992 | by creating appropriate targets in the Makefile whenever an extension |
993 | is built. You can invoke the corresponding section of the makefile with |
994 | |
995 | make perl |
996 | |
997 | That produces a new perl binary in the current directory with all |
e05e23b1 |
998 | extensions linked in that can be found in INST_ARCHLIB , SITELIBEXP, |
999 | and PERL_ARCHLIB. To do that, MakeMaker writes a new Makefile, on |
1000 | UNIX, this is called Makefile.aperl (may be system dependent). If you |
1001 | want to force the creation of a new perl, it is recommended, that you |
1002 | delete this Makefile.aperl, so the directories are searched-through |
1003 | for linkable libraries again. |
005c1a0e |
1004 | |
1005 | The binary can be installed into the directory where perl normally |
1006 | resides on your machine with |
1007 | |
1008 | make inst_perl |
1009 | |
1010 | To produce a perl binary with a different name than C<perl>, either say |
1011 | |
1012 | perl Makefile.PL MAP_TARGET=myperl |
1013 | make myperl |
1014 | make inst_perl |
1015 | |
1016 | or say |
1017 | |
1018 | perl Makefile.PL |
1019 | make myperl MAP_TARGET=myperl |
1020 | make inst_perl MAP_TARGET=myperl |
1021 | |
1022 | In any case you will be prompted with the correct invocation of the |
1023 | C<inst_perl> target that installs the new binary into INSTALLBIN. |
1024 | |
8e07c86e |
1025 | make inst_perl per default writes some documentation of what has been |
1026 | done into the file C<$(INSTALLARCHLIB)/perllocal.pod>. This |
1027 | can be bypassed by calling make pure_inst_perl. |
005c1a0e |
1028 | |
e05e23b1 |
1029 | Warning: the inst_perl: target will most probably overwrite your |
1030 | existing perl binary. Use with care! |
005c1a0e |
1031 | |
8e07c86e |
1032 | Sometimes you might want to build a statically linked perl although |
1033 | your system supports dynamic loading. In this case you may explicitly |
1034 | set the linktype with the invocation of the Makefile.PL or make: |
1035 | |
1036 | perl Makefile.PL LINKTYPE=static # recommended |
1037 | |
1038 | or |
1039 | |
1040 | make LINKTYPE=static # works on most systems |
1041 | |
005c1a0e |
1042 | =head2 Determination of Perl Library and Installation Locations |
1043 | |
1044 | MakeMaker needs to know, or to guess, where certain things are |
e05e23b1 |
1045 | located. Especially INST_LIB and INST_ARCHLIB (where to put the files |
1046 | during the make(1) run), PERL_LIB and PERL_ARCHLIB (where to read |
1047 | existing modules from), and PERL_INC (header files and C<libperl*.*>). |
005c1a0e |
1048 | |
1049 | Extensions may be built either using the contents of the perl source |
e05e23b1 |
1050 | directory tree or from the installed perl library. The recommended way |
1051 | is to build extensions after you have run 'make install' on perl |
1052 | itself. You can do that in any directory on your hard disk that is not |
1053 | below the perl source tree. The support for extensions below the ext |
1054 | directory of the perl distribution is only good for the standard |
1055 | extensions that come with perl. |
005c1a0e |
1056 | |
1057 | If an extension is being built below the C<ext/> directory of the perl |
e05e23b1 |
1058 | source then MakeMaker will set PERL_SRC automatically (e.g., |
1059 | C<../..>). If PERL_SRC is defined and the extension is recognized as |
1060 | a standard extension, then other variables default to the following: |
005c1a0e |
1061 | |
1062 | PERL_INC = PERL_SRC |
1063 | PERL_LIB = PERL_SRC/lib |
1064 | PERL_ARCHLIB = PERL_SRC/lib |
1065 | INST_LIB = PERL_LIB |
1066 | INST_ARCHLIB = PERL_ARCHLIB |
1067 | |
1068 | If an extension is being built away from the perl source then MakeMaker |
1069 | will leave PERL_SRC undefined and default to using the installed copy |
1070 | of the perl library. The other variables default to the following: |
1071 | |
e05e23b1 |
1072 | PERL_INC = $archlibexp/CORE |
1073 | PERL_LIB = $privlibexp |
1074 | PERL_ARCHLIB = $archlibexp |
1075 | INST_LIB = ./blib/lib |
1076 | INST_ARCHLIB = ./blib/arch |
005c1a0e |
1077 | |
1078 | If perl has not yet been installed then PERL_SRC can be defined on the |
1079 | command line as shown in the previous section. |
1080 | |
005c1a0e |
1081 | |
f1387719 |
1082 | =head2 Which architecture dependent directory? |
005c1a0e |
1083 | |
f1387719 |
1084 | If you don't want to keep the defaults for the INSTALL* macros, |
1085 | MakeMaker helps you to minimize the typing needed: the usual |
1086 | relationship between INSTALLPRIVLIB and INSTALLARCHLIB is determined |
1087 | by Configure at perl compilation time. MakeMaker supports the user who |
1088 | sets INSTALLPRIVLIB. If INSTALLPRIVLIB is set, but INSTALLARCHLIB not, |
1089 | then MakeMaker defaults the latter to be the same subdirectory of |
1090 | INSTALLPRIVLIB as Configure decided for the counterparts in %Config , |
1091 | otherwise it defaults to INSTALLPRIVLIB. The same relationship holds |
1092 | for INSTALLSITELIB and INSTALLSITEARCH. |
005c1a0e |
1093 | |
f1387719 |
1094 | MakeMaker gives you much more freedom than needed to configure |
1095 | internal variables and get different results. It is worth to mention, |
1096 | that make(1) also lets you configure most of the variables that are |
1097 | used in the Makefile. But in the majority of situations this will not |
1098 | be necessary, and should only be done, if the author of a package |
1099 | recommends it (or you know what you're doing). |
005c1a0e |
1100 | |
e05e23b1 |
1101 | =head2 Using Attributes and Parameters |
005c1a0e |
1102 | |
1103 | The following attributes can be specified as arguments to WriteMakefile() |
1104 | or as NAME=VALUE pairs on the command line: |
1105 | |
8e07c86e |
1106 | =cut |
005c1a0e |
1107 | |
864a5fa8 |
1108 | # The following "=item C" is used by the attrib_help routine |
8e07c86e |
1109 | # likewise the "=back" below. So be careful when changing it! |
1110 | |
1111 | =over 2 |
1112 | |
864a5fa8 |
1113 | =item C |
8e07c86e |
1114 | |
864a5fa8 |
1115 | Ref to array of *.c file names. Initialised from a directory scan |
1116 | and the values portion of the XS attribute hash. This is not |
1117 | currently used by MakeMaker but may be handy in Makefile.PLs. |
8e07c86e |
1118 | |
864a5fa8 |
1119 | =item CONFIG |
8e07c86e |
1120 | |
864a5fa8 |
1121 | Arrayref. E.g. [qw(archname manext)] defines ARCHNAME & MANEXT from |
1122 | config.sh. MakeMaker will add to CONFIG the following values anyway: |
1123 | ar |
1124 | cc |
1125 | cccdlflags |
1126 | ccdlflags |
1127 | dlext |
1128 | dlsrc |
1129 | ld |
1130 | lddlflags |
1131 | ldflags |
1132 | libc |
1133 | lib_ext |
1134 | obj_ext |
1135 | ranlib |
e05e23b1 |
1136 | sitelibexp |
1137 | sitearchexp |
864a5fa8 |
1138 | so |
8e07c86e |
1139 | |
1140 | =item CONFIGURE |
1141 | |
e05e23b1 |
1142 | CODE reference. The subroutine should return a hash reference. The |
1143 | hash may contain further attributes, e.g. {LIBS => ...}, that have to |
8e07c86e |
1144 | be determined by some evaluation method. |
1145 | |
864a5fa8 |
1146 | =item DEFINE |
8e07c86e |
1147 | |
864a5fa8 |
1148 | Something like C<"-DHAVE_UNISTD_H"> |
8e07c86e |
1149 | |
864a5fa8 |
1150 | =item DIR |
8e07c86e |
1151 | |
864a5fa8 |
1152 | Ref to array of subdirectories containing Makefile.PLs e.g. [ 'sdbm' |
1153 | ] in ext/SDBM_File |
8e07c86e |
1154 | |
864a5fa8 |
1155 | =item DISTNAME |
8e07c86e |
1156 | |
e05e23b1 |
1157 | Your name for distributing the package (by tar file). This defaults to |
864a5fa8 |
1158 | NAME above. |
8e07c86e |
1159 | |
864a5fa8 |
1160 | =item DL_FUNCS |
8e07c86e |
1161 | |
864a5fa8 |
1162 | Hashref of symbol names for routines to be made available as |
1163 | universal symbols. Each key/value pair consists of the package name |
1164 | and an array of routine names in that package. Used only under AIX |
1165 | (export lists) and VMS (linker options) at present. The routine |
1166 | names supplied will be expanded in the same way as XSUB names are |
1167 | expanded by the XS() macro. Defaults to |
8e07c86e |
1168 | |
864a5fa8 |
1169 | {"$(NAME)" => ["boot_$(NAME)" ] } |
8e07c86e |
1170 | |
864a5fa8 |
1171 | e.g. |
8e07c86e |
1172 | |
864a5fa8 |
1173 | {"RPC" => [qw( boot_rpcb rpcb_gettime getnetconfigent )], |
1174 | "NetconfigPtr" => [ 'DESTROY'] } |
8e07c86e |
1175 | |
864a5fa8 |
1176 | =item DL_VARS |
8e07c86e |
1177 | |
864a5fa8 |
1178 | Array of symbol names for variables to be made available as |
1179 | universal symbols. Used only under AIX (export lists) and VMS |
1180 | (linker options) at present. Defaults to []. (e.g. [ qw( |
1181 | Foo_version Foo_numstreams Foo_tree ) ]) |
8e07c86e |
1182 | |
f1387719 |
1183 | =item EXCLUDE_EXT |
1184 | |
1185 | Array of extension names to exclude when doing a static build. This |
1186 | is ignored if INCLUDE_EXT is present. Consult INCLUDE_EXT for more |
1187 | details. (e.g. [ qw( Socket POSIX ) ] ) |
1188 | |
1189 | This attribute may be most useful when specified as a string on the |
1190 | commandline: perl Makefile.PL EXCLUDE_EXT='Socket Safe' |
1191 | |
864a5fa8 |
1192 | =item EXE_FILES |
8e07c86e |
1193 | |
864a5fa8 |
1194 | Ref to array of executable files. The files will be copied to the |
f1387719 |
1195 | INST_SCRIPT directory. Make realclean will delete them from there |
864a5fa8 |
1196 | again. |
8e07c86e |
1197 | |
3b03c0f3 |
1198 | =item NO_VC |
1199 | |
1200 | In general any generated Makefile checks for the current version of |
1201 | MakeMaker and the version the Makefile was built under. If NO_VC is |
1202 | set, the version check is neglected. Do not write this into your |
1203 | Makefile.PL, use it interactively instead. |
1204 | |
864a5fa8 |
1205 | =item FIRST_MAKEFILE |
1206 | |
1207 | The name of the Makefile to be produced. Defaults to the contents of |
1208 | MAKEFILE, but can be overridden. This is used for the second Makefile |
1209 | that will be produced for the MAP_TARGET. |
1210 | |
1211 | =item FULLPERL |
8e07c86e |
1212 | |
864a5fa8 |
1213 | Perl binary able to run this extension. |
1214 | |
1215 | =item H |
1216 | |
1217 | Ref to array of *.h file names. Similar to C. |
1218 | |
1219 | =item INC |
1220 | |
1221 | Include file dirs eg: C<"-I/usr/5include -I/path/to/inc"> |
1222 | |
f1387719 |
1223 | =item INCLUDE_EXT |
1224 | |
1225 | Array of extension names to be included when doing a static build. |
1226 | MakeMaker will normally build with all of the installed extensions when |
1227 | doing a static build, and that is usually the desired behavior. If |
1228 | INCLUDE_EXT is present then MakeMaker will build only with those extensions |
1229 | which are explicitly mentioned. (e.g. [ qw( Socket POSIX ) ]) |
1230 | |
1231 | It is not necessary to mention DynaLoader or the current extension when |
1232 | filling in INCLUDE_EXT. If the INCLUDE_EXT is mentioned but is empty then |
1233 | only DynaLoader and the current extension will be included in the build. |
1234 | |
1235 | This attribute may be most useful when specified as a string on the |
1236 | commandline: perl Makefile.PL INCLUDE_EXT='POSIX Socket Devel::Peek' |
1237 | |
864a5fa8 |
1238 | =item INSTALLARCHLIB |
1239 | |
e05e23b1 |
1240 | Used by 'make install', which copies files from INST_ARCHLIB to this |
1241 | directory if INSTALLDIRS is set to perl. |
864a5fa8 |
1242 | |
1243 | =item INSTALLBIN |
1244 | |
f1387719 |
1245 | Directory to install binary files (e.g. tkperl) into. |
e05e23b1 |
1246 | |
1247 | =item INSTALLDIRS |
1248 | |
1249 | Determines which of the two sets of installation directories to |
1250 | choose: installprivlib and installarchlib versus installsitelib and |
1251 | installsitearch. The first pair is chosen with INSTALLDIRS=perl, the |
1252 | second with INSTALLDIRS=site. Default is site. |
8e07c86e |
1253 | |
1254 | =item INSTALLMAN1DIR |
1255 | |
864a5fa8 |
1256 | This directory gets the man pages at 'make install' time. Defaults to |
1257 | $Config{installman1dir}. |
1258 | |
8e07c86e |
1259 | =item INSTALLMAN3DIR |
1260 | |
864a5fa8 |
1261 | This directory gets the man pages at 'make install' time. Defaults to |
1262 | $Config{installman3dir}. |
8e07c86e |
1263 | |
864a5fa8 |
1264 | =item INSTALLPRIVLIB |
8e07c86e |
1265 | |
e05e23b1 |
1266 | Used by 'make install', which copies files from INST_LIB to this |
1267 | directory if INSTALLDIRS is set to perl. |
1268 | |
f1387719 |
1269 | =item INSTALLSCRIPT |
1270 | |
1271 | Used by 'make install' which copies files from INST_SCRIPT to this |
1272 | directory. |
1273 | |
e05e23b1 |
1274 | =item INSTALLSITELIB |
1275 | |
1276 | Used by 'make install', which copies files from INST_LIB to this |
1277 | directory if INSTALLDIRS is set to site (default). |
1278 | |
1279 | =item INSTALLSITEARCH |
1280 | |
1281 | Used by 'make install', which copies files from INST_ARCHLIB to this |
1282 | directory if INSTALLDIRS is set to site (default). |
8e07c86e |
1283 | |
864a5fa8 |
1284 | =item INST_ARCHLIB |
8e07c86e |
1285 | |
864a5fa8 |
1286 | Same as INST_LIB for architecture dependent files. |
8e07c86e |
1287 | |
f1387719 |
1288 | =item INST_BIN |
1289 | |
1290 | Directory to put real binary files during 'make'. These will be copied |
1291 | to INSTALLBIN during 'make install' |
1292 | |
864a5fa8 |
1293 | =item INST_EXE |
8e07c86e |
1294 | |
f1387719 |
1295 | Old name for INST_SCRIPT. Deprecated. Please use INST_SCRIPT if you |
1296 | need to use it. |
8e07c86e |
1297 | |
864a5fa8 |
1298 | =item INST_LIB |
8e07c86e |
1299 | |
864a5fa8 |
1300 | Directory where we put library files of this extension while building |
1301 | it. |
8e07c86e |
1302 | |
864a5fa8 |
1303 | =item INST_MAN1DIR |
8e07c86e |
1304 | |
864a5fa8 |
1305 | Directory to hold the man pages at 'make' time |
8e07c86e |
1306 | |
864a5fa8 |
1307 | =item INST_MAN3DIR |
8e07c86e |
1308 | |
864a5fa8 |
1309 | Directory to hold the man pages at 'make' time |
8e07c86e |
1310 | |
f1387719 |
1311 | =item INST_SCRIPT |
1312 | |
1313 | Directory, where executable files should be installed during |
1314 | 'make'. Defaults to "./blib/bin", just to have a dummy location during |
1315 | testing. make install will copy the files in INST_SCRIPT to |
1316 | INSTALLSCRIPT. |
1317 | |
864a5fa8 |
1318 | =item LDFROM |
8e07c86e |
1319 | |
864a5fa8 |
1320 | defaults to "$(OBJECT)" and is used in the ld command to specify |
1321 | what files to link/load from (also see dynamic_lib below for how to |
1322 | specify ld flags) |
8e07c86e |
1323 | |
864a5fa8 |
1324 | =item LIBPERL_A |
8e07c86e |
1325 | |
864a5fa8 |
1326 | The filename of the perllibrary that will be used together with this |
1327 | extension. Defaults to libperl.a. |
8e07c86e |
1328 | |
1329 | =item LIBS |
1330 | |
1331 | An anonymous array of alternative library |
1332 | specifications to be searched for (in order) until |
864a5fa8 |
1333 | at least one library is found. E.g. |
8e07c86e |
1334 | |
1335 | 'LIBS' => ["-lgdbm", "-ldbm -lfoo", "-L/path -ldbm.nfs"] |
1336 | |
1337 | Mind, that any element of the array |
1338 | contains a complete set of arguments for the ld |
1339 | command. So do not specify |
1340 | |
1341 | 'LIBS' => ["-ltcl", "-ltk", "-lX11"] |
1342 | |
1343 | See ODBM_File/Makefile.PL for an example, where an array is needed. If |
1344 | you specify a scalar as in |
1345 | |
1346 | 'LIBS' => "-ltcl -ltk -lX11" |
1347 | |
1348 | MakeMaker will turn it into an array with one element. |
1349 | |
864a5fa8 |
1350 | =item LINKTYPE |
8e07c86e |
1351 | |
e05e23b1 |
1352 | 'static' or 'dynamic' (default unless usedl=undef in |
1353 | config.sh). Should only be used to force static linking (also see |
864a5fa8 |
1354 | linkext below). |
8e07c86e |
1355 | |
864a5fa8 |
1356 | =item MAKEAPERL |
8e07c86e |
1357 | |
864a5fa8 |
1358 | Boolean which tells MakeMaker, that it should include the rules to |
1359 | make a perl. This is handled automatically as a switch by |
1360 | MakeMaker. The user normally does not need it. |
8e07c86e |
1361 | |
864a5fa8 |
1362 | =item MAKEFILE |
8e07c86e |
1363 | |
864a5fa8 |
1364 | The name of the Makefile to be produced. |
8e07c86e |
1365 | |
864a5fa8 |
1366 | =item MAN1PODS |
8e07c86e |
1367 | |
864a5fa8 |
1368 | Hashref of pod-containing files. MakeMaker will default this to all |
1369 | EXE_FILES files that include POD directives. The files listed |
1370 | here will be converted to man pages and installed as was requested |
1371 | at Configure time. |
8e07c86e |
1372 | |
864a5fa8 |
1373 | =item MAN3PODS |
8e07c86e |
1374 | |
864a5fa8 |
1375 | Hashref of .pm and .pod files. MakeMaker will default this to all |
1376 | .pod and any .pm files that include POD directives. The files listed |
1377 | here will be converted to man pages and installed as was requested |
1378 | at Configure time. |
8e07c86e |
1379 | |
864a5fa8 |
1380 | =item MAP_TARGET |
8e07c86e |
1381 | |
864a5fa8 |
1382 | If it is intended, that a new perl binary be produced, this variable |
1383 | may hold a name for that binary. Defaults to perl |
8e07c86e |
1384 | |
864a5fa8 |
1385 | =item MYEXTLIB |
4633a7c4 |
1386 | |
864a5fa8 |
1387 | If the extension links to a library that it builds set this to the |
1388 | name of the library (see SDBM_File) |
4633a7c4 |
1389 | |
864a5fa8 |
1390 | =item NAME |
8e07c86e |
1391 | |
864a5fa8 |
1392 | Perl module name for this extension (DBD::Oracle). This will default |
1393 | to the directory name but should be explicitly defined in the |
1394 | Makefile.PL. |
8e07c86e |
1395 | |
864a5fa8 |
1396 | =item NEEDS_LINKING |
8e07c86e |
1397 | |
864a5fa8 |
1398 | MakeMaker will figure out, if an extension contains linkable code |
1399 | anywhere down the directory tree, and will set this variable |
1400 | accordingly, but you can speed it up a very little bit, if you define |
1401 | this boolean variable yourself. |
8e07c86e |
1402 | |
e05e23b1 |
1403 | =item NOECHO |
1404 | |
f1387719 |
1405 | Defaults to C<@>. By setting it to an empty string you can generate a |
e05e23b1 |
1406 | Makefile that echos all commands. Mainly used in debugging MakeMaker |
1407 | itself. |
1408 | |
864a5fa8 |
1409 | =item NORECURS |
8e07c86e |
1410 | |
e05e23b1 |
1411 | Boolean. Attribute to inhibit descending into subdirectories. |
8e07c86e |
1412 | |
864a5fa8 |
1413 | =item OBJECT |
8e07c86e |
1414 | |
864a5fa8 |
1415 | List of object files, defaults to '$(BASEEXT)$(OBJ_EXT)', but can be a long |
1416 | string containing all object files, e.g. "tkpBind.o |
1417 | tkpButton.o tkpCanvas.o" |
8e07c86e |
1418 | |
3b03c0f3 |
1419 | =item OPTIMIZE |
1420 | |
1421 | Defaults to C<-O>. Set it to C<-g> to turn debugging on. The flag is |
1422 | passed to subdirectory makes. |
1423 | |
864a5fa8 |
1424 | =item PERL |
8e07c86e |
1425 | |
864a5fa8 |
1426 | Perl binary for tasks that can be done by miniperl |
8e07c86e |
1427 | |
864a5fa8 |
1428 | =item PERLMAINCC |
005c1a0e |
1429 | |
864a5fa8 |
1430 | The call to the program that is able to compile perlmain.c. Defaults |
1431 | to $(CC). |
005c1a0e |
1432 | |
864a5fa8 |
1433 | =item PERL_ARCHLIB |
005c1a0e |
1434 | |
864a5fa8 |
1435 | Same as above for architecture dependent files |
8e07c86e |
1436 | |
864a5fa8 |
1437 | =item PERL_LIB |
8e07c86e |
1438 | |
864a5fa8 |
1439 | Directory containing the Perl library to use. |
8e07c86e |
1440 | |
864a5fa8 |
1441 | =item PERL_SRC |
8e07c86e |
1442 | |
864a5fa8 |
1443 | Directory containing the Perl source code (use of this should be |
1444 | avoided, it may be undefined) |
8e07c86e |
1445 | |
864a5fa8 |
1446 | =item PL_FILES |
8e07c86e |
1447 | |
864a5fa8 |
1448 | Ref to hash of files to be processed as perl programs. MakeMaker |
1449 | will default to any found *.PL file (except Makefile.PL) being keys |
1450 | and the basename of the file being the value. E.g. |
8e07c86e |
1451 | |
864a5fa8 |
1452 | {'foobar.PL' => 'foobar'} |
8e07c86e |
1453 | |
864a5fa8 |
1454 | The *.PL files are expected to produce output to the target files |
1455 | themselves. |
8e07c86e |
1456 | |
864a5fa8 |
1457 | =item PM |
8e07c86e |
1458 | |
864a5fa8 |
1459 | Hashref of .pm files and *.pl files to be installed. e.g. |
8e07c86e |
1460 | |
864a5fa8 |
1461 | {'name_of_file.pm' => '$(INST_LIBDIR)/install_as.pm'} |
8e07c86e |
1462 | |
864a5fa8 |
1463 | By default this will include *.pm and *.pl. If a lib directory |
1464 | exists and is not listed in DIR (above) then any *.pm and *.pl files |
1465 | it contains will also be included by default. Defining PM in the |
1466 | Makefile.PL will override PMLIBDIRS. |
8e07c86e |
1467 | |
864a5fa8 |
1468 | =item PMLIBDIRS |
8e07c86e |
1469 | |
864a5fa8 |
1470 | Ref to array of subdirectories containing library files. Defaults to |
1471 | [ 'lib', $(BASEEXT) ]. The directories will be scanned and any files |
1472 | they contain will be installed in the corresponding location in the |
1473 | library. A libscan() method can be used to alter the behaviour. |
1474 | Defining PM in the Makefile.PL will override PMLIBDIRS. |
8e07c86e |
1475 | |
864a5fa8 |
1476 | =item PREFIX |
8e07c86e |
1477 | |
864a5fa8 |
1478 | Can be used to set the three INSTALL* attributes in one go (except for |
e05e23b1 |
1479 | probably INSTALLMAN1DIR, if it is not below PREFIX according to |
1480 | %Config). They will have PREFIX as a common directory node and will |
1481 | branch from that node into lib/, lib/ARCHNAME or whatever Configure |
1482 | decided at the build time of your perl (unless you override one of |
1483 | them, of course). |
8e07c86e |
1484 | |
f1387719 |
1485 | =item PREREQ_PM |
8e07c86e |
1486 | |
f1387719 |
1487 | Hashref: Names of modules that need to be available to run this |
1488 | extension (e.g. Fcntl for SDBM_File) are the keys of the hash and the |
1489 | desired version is the value. If the required version number is 0, we |
1490 | only check if any version is installed already. |
8e07c86e |
1491 | |
864a5fa8 |
1492 | =item SKIP |
8e07c86e |
1493 | |
864a5fa8 |
1494 | Arryref. E.g. [qw(name1 name2)] skip (do not write) sections of the |
f1387719 |
1495 | Makefile. Caution! Do not use the SKIP attribute for the neglectible |
1496 | speedup. It may seriously damage the resulting Makefile. Only use it, |
1497 | if you really need it. |
8e07c86e |
1498 | |
864a5fa8 |
1499 | =item TYPEMAPS |
8e07c86e |
1500 | |
864a5fa8 |
1501 | Ref to array of typemap file names. Use this when the typemaps are |
1502 | in some directory other than the current directory or when they are |
1503 | not named B<typemap>. The last typemap in the list takes |
1504 | precedence. A typemap in the current directory has highest |
1505 | precedence, even if it isn't listed in TYPEMAPS. The default system |
1506 | typemap has lowest precedence. |
8e07c86e |
1507 | |
864a5fa8 |
1508 | =item VERSION |
8e07c86e |
1509 | |
864a5fa8 |
1510 | Your version number for distributing the package. This defaults to |
1511 | 0.1. |
8e07c86e |
1512 | |
0d8023a2 |
1513 | =item VERSION_FROM |
1514 | |
1515 | Instead of specifying the VERSION in the Makefile.PL you can let |
1516 | MakeMaker parse a file to determine the version number. The parsing |
1517 | routine requires that the file named by VERSION_FROM contains one |
1518 | single line to compute the version number. The first line in the file |
1519 | that contains the regular expression |
1520 | |
1521 | /(\$[\w:]*\bVERSION)\b.*=/ |
1522 | |
1523 | will be evaluated with eval() and the value of the named variable |
1524 | B<after> the eval() will be assigned to the VERSION attribute of the |
1525 | MakeMaker object. The following lines will be parsed o.k.: |
1526 | |
1527 | $VERSION = '1.00'; |
f1387719 |
1528 | ( $VERSION ) = '$Revision: 1.201 $ ' =~ /\$Revision:\s+([^\s]+)/; |
0d8023a2 |
1529 | $FOO::VERSION = '1.10'; |
1530 | |
1531 | but these will fail: |
1532 | |
1533 | my $VERSION = '1.01'; |
1534 | local $VERSION = '1.02'; |
1535 | local $FOO::VERSION = '1.30'; |
1536 | |
1537 | The file named in VERSION_FROM is added as a dependency to Makefile to |
1538 | guarantee, that the Makefile contains the correct VERSION macro after |
1539 | a change of the file. |
1540 | |
864a5fa8 |
1541 | =item XS |
8e07c86e |
1542 | |
864a5fa8 |
1543 | Hashref of .xs files. MakeMaker will default this. e.g. |
8e07c86e |
1544 | |
864a5fa8 |
1545 | {'name_of_file.xs' => 'name_of_file.c'} |
8e07c86e |
1546 | |
864a5fa8 |
1547 | The .c files will automatically be included in the list of files |
1548 | deleted by a make clean. |
4633a7c4 |
1549 | |
864a5fa8 |
1550 | =item XSOPT |
8e07c86e |
1551 | |
864a5fa8 |
1552 | String of options to pass to xsubpp. This might include C<-C++> or |
1553 | C<-extern>. Do not include typemaps here; the TYPEMAP parameter exists for |
1554 | that purpose. |
8e07c86e |
1555 | |
864a5fa8 |
1556 | =item XSPROTOARG |
4633a7c4 |
1557 | |
4e68a208 |
1558 | May be set to an empty string, which is identical to C<-prototypes>, or |
864a5fa8 |
1559 | C<-noprototypes>. See the xsubpp documentation for details. MakeMaker |
4e68a208 |
1560 | defaults to the empty string. |
1561 | |
0d8023a2 |
1562 | =item XS_VERSION |
1563 | |
1564 | Your version number for the .xs file of this package. This defaults |
1565 | to the value of the VERSION attribute. |
1566 | |
8e07c86e |
1567 | =back |
1568 | |
1569 | =head2 Additional lowercase attributes |
1570 | |
1571 | can be used to pass parameters to the methods which implement that |
f1387719 |
1572 | part of the Makefile. |
8e07c86e |
1573 | |
1574 | =over 2 |
1575 | |
864a5fa8 |
1576 | =item clean |
8e07c86e |
1577 | |
864a5fa8 |
1578 | {FILES => "*.xyz foo"} |
1579 | |
c07a80fd |
1580 | =item depend |
1581 | |
1582 | {ANY_TARGET => ANY_DEPENDECY, ...} |
1583 | |
864a5fa8 |
1584 | =item dist |
1585 | |
1586 | {TARFLAGS => 'cvfF', COMPRESS => 'gzip', SUFFIX => 'gz', |
3b03c0f3 |
1587 | SHAR => 'shar -m', DIST_CP => 'ln', ZIP => '/bin/zip', |
f1387719 |
1588 | ZIPFLAGS => '-rl', DIST_DEFAULT => 'private tardist' } |
864a5fa8 |
1589 | |
1590 | If you specify COMPRESS, then SUFFIX should also be altered, as it is |
1591 | needed to tell make the target file of the compression. Setting |
1592 | DIST_CP to ln can be useful, if you need to preserve the timestamps on |
1593 | your files. DIST_CP can take the values 'cp', which copies the file, |
1594 | 'ln', which links the file, and 'best' which copies symbolic links and |
1595 | links the rest. Default is 'best'. |
1596 | |
1597 | =item dynamic_lib |
1598 | |
0d8023a2 |
1599 | {ARMAYBE => 'ar', OTHERLDFLAGS => '...', INST_DYNAMIC_DEP => '...'} |
8e07c86e |
1600 | |
1601 | =item installpm |
1602 | |
3b03c0f3 |
1603 | Deprecated as of MakeMaker 5.23. See L<ExtUtils::MM_Unix/pm_to_blib>. |
8e07c86e |
1604 | |
1605 | =item linkext |
1606 | |
1607 | {LINKTYPE => 'static', 'dynamic' or ''} |
1608 | |
864a5fa8 |
1609 | NB: Extensions that have nothing but *.pm files had to say |
8e07c86e |
1610 | |
1611 | {LINKTYPE => ''} |
1612 | |
864a5fa8 |
1613 | with Pre-5.0 MakeMakers. Since version 5.00 of MakeMaker such a line |
1614 | can be deleted safely. MakeMaker recognizes, when there's nothing to |
1615 | be linked. |
8e07c86e |
1616 | |
864a5fa8 |
1617 | =item macro |
8e07c86e |
1618 | |
864a5fa8 |
1619 | {ANY_MACRO => ANY_VALUE, ...} |
8e07c86e |
1620 | |
1621 | =item realclean |
1622 | |
1623 | {FILES => '$(INST_ARCHAUTODIR)/*.xyz'} |
1624 | |
8e07c86e |
1625 | =item tool_autosplit |
1626 | |
1627 | {MAXLEN =E<gt> 8} |
005c1a0e |
1628 | |
1629 | =back |
1630 | |
8e07c86e |
1631 | =cut |
1632 | |
1633 | # bug in pod2html, so leave the =back |
1634 | |
1635 | # Don't delete this cut, MM depends on it! |
1636 | |
005c1a0e |
1637 | =head2 Overriding MakeMaker Methods |
1638 | |
1639 | If you cannot achieve the desired Makefile behaviour by specifying |
1640 | attributes you may define private subroutines in the Makefile.PL. |
1641 | Each subroutines returns the text it wishes to have written to |
1642 | the Makefile. To override a section of the Makefile you can |
1643 | either say: |
1644 | |
1645 | sub MY::c_o { "new literal text" } |
1646 | |
1647 | or you can edit the default by saying something like: |
1648 | |
8e07c86e |
1649 | sub MY::c_o { |
f1387719 |
1650 | my($inherited) = shift->SUPER::c_o(@_); |
1651 | $inherited =~ s/old text/new text/; |
1652 | $inherited; |
8e07c86e |
1653 | } |
1654 | |
f1387719 |
1655 | If you running experiments with embedding perl as a library into other |
1656 | applications, you might find MakeMaker not sufficient. You'd better |
1657 | have a look at ExtUtils::embed which is a collection of utilities for |
1658 | embedding. |
005c1a0e |
1659 | |
1660 | If you still need a different solution, try to develop another |
1661 | subroutine, that fits your needs and submit the diffs to |
8e07c86e |
1662 | F<perl5-porters@nicoh.com> or F<comp.lang.perl.misc> as appropriate. |
005c1a0e |
1663 | |
3b03c0f3 |
1664 | For a complete description of all MakeMaker methods see L<ExtUtils::MM_Unix>. |
1665 | |
1666 | Here is a simple example of how to add a new target to the generated |
1667 | Makefile: |
1668 | |
1669 | sub MY::postamble { |
1670 | ' |
1671 | $(MYEXTLIB): sdbm/Makefile |
1672 | cd sdbm && $(MAKE) all |
1673 | '; |
1674 | } |
1675 | |
1676 | |
f1387719 |
1677 | =head2 Hintsfile support |
1678 | |
1679 | MakeMaker.pm uses the architecture specific information from |
1680 | Config.pm. In addition it evaluates architecture specific hints files |
1681 | in a C<hints/> directory. The hints files are expected to be named |
1682 | like their counterparts in C<PERL_SRC/hints>, but with an C<.pl> file |
1683 | name extension (eg. C<next_3_2.pl>). They are simply C<eval>ed by |
1684 | MakeMaker within the WriteMakefile() subroutine, and can be used to |
1685 | execute commands as well as to include special variables. The rules |
1686 | which hintsfile is chosen are the same as in Configure. |
1687 | |
1688 | The hintsfile is eval()ed immediately after the arguments given to |
1689 | WriteMakefile are stuffed into a hash reference $self but before this |
1690 | reference becomes blessed. So if you want to do the equivalent to |
1691 | override or create an attribute you would say something like |
1692 | |
1693 | $self->{LIBS} = ['-ldbm -lucb -lc']; |
1694 | |
005c1a0e |
1695 | =head2 Distribution Support |
1696 | |
1697 | For authors of extensions MakeMaker provides several Makefile |
1698 | targets. Most of the support comes from the ExtUtils::Manifest module, |
1699 | where additional documentation can be found. |
1700 | |
1701 | =over 4 |
1702 | |
1703 | =item make distcheck |
8e07c86e |
1704 | |
005c1a0e |
1705 | reports which files are below the build directory but not in the |
1706 | MANIFEST file and vice versa. (See ExtUtils::Manifest::fullcheck() for |
1707 | details) |
1708 | |
4633a7c4 |
1709 | =item make skipcheck |
1710 | |
1711 | reports which files are skipped due to the entries in the |
1712 | C<MANIFEST.SKIP> file (See ExtUtils::Manifest::skipcheck() for |
1713 | details) |
1714 | |
005c1a0e |
1715 | =item make distclean |
8e07c86e |
1716 | |
005c1a0e |
1717 | does a realclean first and then the distcheck. Note that this is not |
1718 | needed to build a new distribution as long as you are sure, that the |
1719 | MANIFEST file is ok. |
1720 | |
1721 | =item make manifest |
8e07c86e |
1722 | |
005c1a0e |
1723 | rewrites the MANIFEST file, adding all remaining files found (See |
1724 | ExtUtils::Manifest::mkmanifest() for details) |
1725 | |
1726 | =item make distdir |
8e07c86e |
1727 | |
005c1a0e |
1728 | Copies all the files that are in the MANIFEST file to a newly created |
1729 | directory with the name C<$(DISTNAME)-$(VERSION)>. If that directory |
1730 | exists, it will be removed first. |
1731 | |
8e07c86e |
1732 | =item make disttest |
1733 | |
1734 | Makes a distdir first, and runs a C<perl Makefile.PL>, a make, and |
4633a7c4 |
1735 | a make test in that directory. |
8e07c86e |
1736 | |
005c1a0e |
1737 | =item make tardist |
8e07c86e |
1738 | |
3b03c0f3 |
1739 | First does a distdir. Then a command $(PREOP) which defaults to a null |
f1387719 |
1740 | command, followed by $(TOUNIX), which defaults to a null command under |
1741 | UNIX, and will convert files in distribution directory to UNIX format |
1742 | otherwise. Next it runs C<tar> on that directory into a tarfile and |
3b03c0f3 |
1743 | deletes the directory. Finishes with a command $(POSTOP) which |
1744 | defaults to a null command. |
005c1a0e |
1745 | |
1746 | =item make dist |
8e07c86e |
1747 | |
005c1a0e |
1748 | Defaults to $(DIST_DEFAULT) which in turn defaults to tardist. |
1749 | |
1750 | =item make uutardist |
8e07c86e |
1751 | |
005c1a0e |
1752 | Runs a tardist first and uuencodes the tarfile. |
1753 | |
1754 | =item make shdist |
8e07c86e |
1755 | |
3b03c0f3 |
1756 | First does a distdir. Then a command $(PREOP) which defaults to a null |
1757 | command. Next it runs C<shar> on that directory into a sharfile and |
1758 | deletes the intermediate directory again. Finishes with a command |
1759 | $(POSTOP) which defaults to a null command. Note: For shdist to work |
1760 | properly a C<shar> program that can handle directories is mandatory. |
1761 | |
1762 | =item make zipdist |
1763 | |
1764 | First does a distdir. Then a command $(PREOP) which defaults to a null |
1765 | command. Runs C<$(ZIP) $(ZIPFLAGS)> on that directory into a |
1766 | zipfile. Then deletes that directory. Finishes with a command |
1767 | $(POSTOP) which defaults to a null command. |
005c1a0e |
1768 | |
1769 | =item make ci |
8e07c86e |
1770 | |
1771 | Does a $(CI) and a $(RCS_LABEL) on all files in the MANIFEST file. |
1772 | |
1773 | =back |
005c1a0e |
1774 | |
1775 | Customization of the dist targets can be done by specifying a hash |
1776 | reference to the dist attribute of the WriteMakefile call. The |
1777 | following parameters are recognized: |
1778 | |
8e07c86e |
1779 | CI ('ci -u') |
005c1a0e |
1780 | COMPRESS ('compress') |
005c1a0e |
1781 | POSTOP ('@ :') |
8e07c86e |
1782 | PREOP ('@ :') |
f1387719 |
1783 | TO_UNIX (depends on the system) |
8e07c86e |
1784 | RCS_LABEL ('rcs -q -Nv$(VERSION_SYM):') |
1785 | SHAR ('shar') |
1786 | SUFFIX ('Z') |
1787 | TAR ('tar') |
1788 | TARFLAGS ('cvf') |
3b03c0f3 |
1789 | ZIP ('zip') |
1790 | ZIPFLAGS ('-r') |
005c1a0e |
1791 | |
1792 | An example: |
1793 | |
1794 | WriteMakefile( 'dist' => { COMPRESS=>"gzip", SUFFIX=>"gz" }) |
1795 | |
f1387719 |
1796 | =head1 SEE ALSO |
1797 | |
1798 | ExtUtils::MM_Unix, ExtUtils::Manifest, ExtUtils::testlib, |
1799 | ExtUtils::Install, ExtUtils::embed |
005c1a0e |
1800 | |
e05e23b1 |
1801 | =head1 AUTHORS |
fed7345c |
1802 | |
1803 | Andy Dougherty F<E<lt>doughera@lafcol.lafayette.eduE<gt>>, Andreas |
8e07c86e |
1804 | KE<ouml>nig F<E<lt>A.Koenig@franz.ww.TU-Berlin.DEE<gt>>, Tim Bunce |
fed7345c |
1805 | F<E<lt>Tim.Bunce@ig.co.ukE<gt>>. VMS support by Charles Bailey |
a5f75d66 |
1806 | F<E<lt>bailey@genetics.upenn.eduE<gt>>. OS/2 support by Ilya |
e05e23b1 |
1807 | Zakharevich F<E<lt>ilya@math.ohio-state.eduE<gt>>. Contact the |
1808 | makemaker mailing list C<mailto:makemaker@franz.ww.tu-berlin.de>, if |
1809 | you have any questions. |
fed7345c |
1810 | |
005c1a0e |
1811 | =cut |