Commit | Line | Data |
562c8117 |
1 | # $Id: /local/ExtUtils-MakeMaker/lib/ExtUtils/MakeMaker.pm 19606 2006-10-10T01:01:21.319714Z schwern $ |
e05e23b1 |
2 | package ExtUtils::MakeMaker; |
3 | |
57b1a898 |
4 | BEGIN {require 5.005_03;} |
5 | |
8e07c86e |
6 | require Exporter; |
7292dc67 |
7 | use ExtUtils::MakeMaker::Config; |
3b03c0f3 |
8 | use Carp (); |
dedf98bc |
9 | use File::Path; |
e05e23b1 |
10 | |
11 | use vars qw( |
f6d6199c |
12 | @ISA @EXPORT @EXPORT_OK |
7292dc67 |
13 | $VERSION $Verbose %Config |
dedf98bc |
14 | @Prepend_parent @Parent |
5e9e174b |
15 | %Recognized_Att_Keys @Get_from_Config @MM_Sections @Overridable |
dedf98bc |
16 | $Filename |
f6d6199c |
17 | ); |
7292dc67 |
18 | |
19 | # Has to be on its own line with no $ after it to avoid being noticed by |
20 | # the version control system |
21 | use vars qw($Revision); |
5e9e174b |
22 | use strict; |
005c1a0e |
23 | |
562c8117 |
24 | $VERSION = '6.31'; |
25 | ($Revision) = q$Revision: 19606 $ =~ /Revision:\s+(\S+)/; |
7292dc67 |
26 | |
e05e23b1 |
27 | @ISA = qw(Exporter); |
28 | @EXPORT = qw(&WriteMakefile &writeMakefile $Verbose &prompt); |
f6d6199c |
29 | @EXPORT_OK = qw($VERSION &neatvalue &mkbootstrap &mksymlists); |
42793c05 |
30 | |
f6d6199c |
31 | # These will go away once the last of the Win32 & VMS specific code is |
32 | # purged. |
5e9e174b |
33 | my $Is_VMS = $^O eq 'VMS'; |
5e9e174b |
34 | my $Is_Win32 = $^O eq 'MSWin32'; |
3b03c0f3 |
35 | |
dedf98bc |
36 | # Our filename for diagnostic and debugging purposes. More reliable |
37 | # than %INC (think caseless filesystems) |
38 | $Filename = __FILE__; |
39 | |
9ab29e2b |
40 | full_setup(); |
864a5fa8 |
41 | |
f6d6199c |
42 | require ExtUtils::MM; # Things like CPAN assume loading ExtUtils::MakeMaker |
43 | # will give them MM. |
e05e23b1 |
44 | |
45bc4d3a |
45 | require ExtUtils::MY; # XXX pre-5.8 versions of ExtUtils::Embed expect |
46 | # loading ExtUtils::MakeMaker will give them MY. |
47 | # This will go when Embed is it's own CPAN module. |
48 | |
f1387719 |
49 | |
3b03c0f3 |
50 | sub WriteMakefile { |
51 | Carp::croak "WriteMakefile: Need even number of args" if @_ % 2; |
f1387719 |
52 | |
f6d6199c |
53 | require ExtUtils::MY; |
3b03c0f3 |
54 | my %att = @_; |
69ff8adf |
55 | |
56 | _verify_att(\%att); |
57 | |
e0678a30 |
58 | my $mm = MM->new(\%att); |
59 | $mm->flush; |
60 | |
61 | return $mm; |
3b03c0f3 |
62 | } |
63 | |
69ff8adf |
64 | |
d5d4ec93 |
65 | # Basic signatures of the attributes WriteMakefile takes. Each is the |
66 | # reference type. Empty value indicate it takes a non-reference |
67 | # scalar. |
479d2113 |
68 | my %Att_Sigs; |
69 | my %Special_Sigs = ( |
d5d4ec93 |
70 | C => 'array', |
d5d4ec93 |
71 | CONFIG => 'array', |
72 | CONFIGURE => 'code', |
d5d4ec93 |
73 | DIR => 'array', |
d5d4ec93 |
74 | DL_FUNCS => 'hash', |
75 | DL_VARS => 'array', |
76 | EXCLUDE_EXT => 'array', |
77 | EXE_FILES => 'array', |
d5d4ec93 |
78 | FUNCLIST => 'array', |
79 | H => 'array', |
80 | IMPORTS => 'hash', |
d5d4ec93 |
81 | INCLUDE_EXT => 'array', |
d5d4ec93 |
82 | LIBS => ['array',''], |
d5d4ec93 |
83 | MAN1PODS => 'hash', |
84 | MAN3PODS => 'hash', |
d5d4ec93 |
85 | PL_FILES => 'hash', |
86 | PM => 'hash', |
87 | PMLIBDIRS => 'array', |
2977d345 |
88 | PMLIBPARENTDIRS => 'array', |
d5d4ec93 |
89 | PREREQ_PM => 'hash', |
d5d4ec93 |
90 | SKIP => 'array', |
91 | TYPEMAPS => 'array', |
d5d4ec93 |
92 | XS => 'hash', |
479d2113 |
93 | _KEEP_AFTER_FLUSH => '', |
69ff8adf |
94 | |
95 | clean => 'hash', |
96 | depend => 'hash', |
97 | dist => 'hash', |
98 | dynamic_lib=> 'hash', |
99 | linkext => 'hash', |
100 | macro => 'hash', |
531e2ba1 |
101 | postamble => 'hash', |
69ff8adf |
102 | realclean => 'hash', |
103 | test => 'hash', |
104 | tool_autosplit => 'hash', |
105 | ); |
106 | |
479d2113 |
107 | @Att_Sigs{keys %Recognized_Att_Keys} = ('') x keys %Recognized_Att_Keys; |
108 | @Att_Sigs{keys %Special_Sigs} = values %Special_Sigs; |
109 | |
69ff8adf |
110 | |
111 | sub _verify_att { |
112 | my($att) = @_; |
113 | |
114 | while( my($key, $val) = each %$att ) { |
115 | my $sig = $Att_Sigs{$key}; |
d5d4ec93 |
116 | unless( defined $sig ) { |
117 | warn "WARNING: $key is not a known parameter.\n"; |
118 | next; |
119 | } |
120 | |
121 | my @sigs = ref $sig ? @$sig : $sig; |
122 | my $given = lc ref $val; |
69ff8adf |
123 | unless( grep $given eq $_, @sigs ) { |
d5d4ec93 |
124 | my $takes = join " or ", map { $_ ne '' ? "$_ reference" |
125 | : "string/number" |
69ff8adf |
126 | } @sigs; |
d5d4ec93 |
127 | my $has = $given ne '' ? "$given reference" |
128 | : "string/number"; |
69ff8adf |
129 | warn "WARNING: $key takes a $takes not a $has.\n". |
130 | " Please inform the author.\n"; |
69ff8adf |
131 | } |
132 | } |
133 | } |
134 | |
f1387719 |
135 | sub prompt ($;$) { |
479d2113 |
136 | my($mess, $def) = @_; |
e0678a30 |
137 | Carp::confess("prompt function called without an argument") |
138 | unless defined $mess; |
479d2113 |
139 | |
140 | my $isa_tty = -t STDIN && (-t STDOUT || !(-f STDOUT || -c STDOUT)) ; |
141 | |
f1387719 |
142 | my $dispdef = defined $def ? "[$def] " : " "; |
143 | $def = defined $def ? $def : ""; |
479d2113 |
144 | |
13bc20ff |
145 | local $|=1; |
f6d6199c |
146 | local $\; |
13bc20ff |
147 | print "$mess $dispdef"; |
479d2113 |
148 | |
149 | my $ans; |
150 | if ($ENV{PERL_MM_USE_DEFAULT} || (!$isa_tty && eof STDIN)) { |
151 | print "$def\n"; |
152 | } |
153 | else { |
f6d6199c |
154 | $ans = <STDIN>; |
155 | if( defined $ans ) { |
156 | chomp $ans; |
157 | } |
158 | else { # user hit ctrl-D |
159 | print "\n"; |
160 | } |
161 | } |
479d2113 |
162 | |
f6d6199c |
163 | return (!defined $ans || $ans eq '') ? $def : $ans; |
3b03c0f3 |
164 | } |
165 | |
e05e23b1 |
166 | sub eval_in_subdirs { |
167 | my($self) = @_; |
a8112c7f |
168 | use Cwd qw(cwd abs_path); |
f582e489 |
169 | my $pwd = cwd() || die "Can't figure out your cwd!"; |
170 | |
3593a55e |
171 | local @INC = map eval {abs_path($_) if -e} || $_, @INC; |
f6d6199c |
172 | push @INC, '.'; # '.' has to always be at the end of @INC |
e05e23b1 |
173 | |
5e9e174b |
174 | foreach my $dir (@{$self->{DIR}}){ |
f6d6199c |
175 | my($abs) = $self->catdir($pwd,$dir); |
a7d1454b |
176 | eval { $self->eval_in_x($abs); }; |
177 | last if $@; |
e05e23b1 |
178 | } |
e05e23b1 |
179 | chdir $pwd; |
a7d1454b |
180 | die $@ if $@; |
864a5fa8 |
181 | } |
42793c05 |
182 | |
e05e23b1 |
183 | sub eval_in_x { |
184 | my($self,$dir) = @_; |
6626a13a |
185 | chdir $dir or Carp::carp("Couldn't change to directory $dir: $!"); |
5e9e174b |
186 | |
f6d6199c |
187 | { |
188 | package main; |
189 | do './Makefile.PL'; |
190 | }; |
f1387719 |
191 | if ($@) { |
f6d6199c |
192 | # if ($@ =~ /prerequisites/) { |
193 | # die "MakeMaker WARNING: $@"; |
194 | # } else { |
195 | # warn "WARNING from evaluation of $dir/Makefile.PL: $@"; |
196 | # } |
45bc4d3a |
197 | die "ERROR from evaluation of $dir/Makefile.PL: $@"; |
f1387719 |
198 | } |
e05e23b1 |
199 | } |
200 | |
479d2113 |
201 | |
202 | # package name for the classes into which the first object will be blessed |
203 | my $PACKNAME = 'PACK000'; |
204 | |
e05e23b1 |
205 | sub full_setup { |
206 | $Verbose ||= 0; |
3b03c0f3 |
207 | |
5e9e174b |
208 | my @attrib_help = qw/ |
3b03c0f3 |
209 | |
762efda7 |
210 | AUTHOR ABSTRACT ABSTRACT_FROM BINARY_LOCATION |
211 | C CAPI CCFLAGS CONFIG CONFIGURE DEFINE DIR DISTNAME DL_FUNCS DL_VARS |
2977d345 |
212 | EXCLUDE_EXT EXE_FILES EXTRA_META FIRST_MAKEFILE |
75e2e551 |
213 | FULLPERL FULLPERLRUN FULLPERLRUNINST |
214 | FUNCLIST H IMPORTS |
431b0fc4 |
215 | |
45bc4d3a |
216 | INST_ARCHLIB INST_SCRIPT INST_BIN INST_LIB INST_MAN1DIR INST_MAN3DIR |
5c161494 |
217 | INSTALLDIRS |
2977d345 |
218 | DESTDIR PREFIX INSTALL_BASE |
479d2113 |
219 | PERLPREFIX SITEPREFIX VENDORPREFIX |
5c161494 |
220 | INSTALLPRIVLIB INSTALLSITELIB INSTALLVENDORLIB |
221 | INSTALLARCHLIB INSTALLSITEARCH INSTALLVENDORARCH |
45bc4d3a |
222 | INSTALLBIN INSTALLSITEBIN INSTALLVENDORBIN |
223 | INSTALLMAN1DIR INSTALLMAN3DIR |
224 | INSTALLSITEMAN1DIR INSTALLSITEMAN3DIR |
225 | INSTALLVENDORMAN1DIR INSTALLVENDORMAN3DIR |
002b9267 |
226 | INSTALLSCRIPT INSTALLSITESCRIPT INSTALLVENDORSCRIPT |
5c161494 |
227 | PERL_LIB PERL_ARCHLIB |
228 | SITELIBEXP SITEARCHEXP |
431b0fc4 |
229 | |
2977d345 |
230 | INC INCLUDE_EXT LDFROM LIB LIBPERL_A LIBS LICENSE |
231 | LINKTYPE MAKE MAKEAPERL MAKEFILE MAKEFILE_OLD MAN1PODS MAN3PODS MAP_TARGET |
2530b651 |
232 | MYEXTLIB NAME NEEDS_LINKING NOECHO NO_META NORECURS NO_VC OBJECT OPTIMIZE |
431b0fc4 |
233 | PERL_MALLOC_OK PERL PERLMAINCC PERLRUN PERLRUNINST PERL_CORE |
5c161494 |
234 | PERL_SRC PERM_RW PERM_RWX |
2977d345 |
235 | PL_FILES PM PM_FILTER PMLIBDIRS PMLIBPARENTDIRS POLLUTE PPM_INSTALL_EXEC |
5c161494 |
236 | PPM_INSTALL_SCRIPT PREREQ_FATAL PREREQ_PM PREREQ_PRINT PRINT_PREREQ |
bb68fe9e |
237 | SIGN SKIP TYPEMAPS VERSION VERSION_FROM XS XSOPT XSPROTOARG |
f1387719 |
238 | XS_VERSION clean depend dist dynamic_lib linkext macro realclean |
762efda7 |
239 | tool_autosplit |
431b0fc4 |
240 | |
084592ab |
241 | MACPERL_SRC MACPERL_LIB MACLIBS_68K MACLIBS_PPC MACLIBS_SC MACLIBS_MRC |
242 | MACLIBS_ALL_68K MACLIBS_ALL_PPC MACLIBS_SHARED |
f6d6199c |
243 | /; |
3b03c0f3 |
244 | |
875fa795 |
245 | # IMPORTS is used under OS/2 and Win32 |
f1387719 |
246 | |
247 | # @Overridable is close to @MM_Sections but not identical. The |
248 | # order is important. Many subroutines declare macros. These |
249 | # depend on each other. Let's try to collect the macros up front, |
250 | # then pasthru, then the rules. |
251 | |
252 | # MM_Sections are the sections we have to call explicitly |
253 | # in Overridable we have subroutines that are used indirectly |
3b03c0f3 |
254 | |
e05e23b1 |
255 | |
256 | @MM_Sections = |
f6d6199c |
257 | qw( |
3b03c0f3 |
258 | |
479d2113 |
259 | post_initialize const_config constants platform_constants |
260 | tool_autosplit tool_xsubpp tools_other |
261 | |
262 | makemakerdflt |
263 | |
264 | dist macro depend cflags const_loadlibs const_cccmd |
f1387719 |
265 | post_constants |
266 | |
267 | pasthru |
268 | |
479d2113 |
269 | special_targets |
270 | c_o xs_c xs_o |
af7522e5 |
271 | top_targets blibdirs linkext dlsyms dynamic dynamic_bs |
f6d6199c |
272 | dynamic_lib static static_lib manifypods processPL |
cae6c631 |
273 | installbin subdirs |
479d2113 |
274 | clean_subdirs clean realclean_subdirs realclean |
7292dc67 |
275 | metafile signature |
276 | dist_basics dist_core distdir dist_test dist_ci distmeta distsignature |
8f993c78 |
277 | install force perldepend makefile staticmake test ppd |
3b03c0f3 |
278 | |
f6d6199c |
279 | ); # loses section ordering |
e05e23b1 |
280 | |
3b03c0f3 |
281 | @Overridable = @MM_Sections; |
f1387719 |
282 | push @Overridable, qw[ |
283 | |
af7522e5 |
284 | libscan makeaperl needs_linking perm_rw perm_rwx |
2977d345 |
285 | subdir_x test_via_harness test_via_script |
286 | |
287 | init_VERSION init_dist init_INST init_INSTALL init_DEST init_dirscan |
288 | init_PM init_MANPODS init_xs init_PERL init_DIRFILESEP init_linker |
f6d6199c |
289 | ]; |
3b03c0f3 |
290 | |
f1387719 |
291 | push @MM_Sections, qw[ |
3b03c0f3 |
292 | |
f1387719 |
293 | pm_to_blib selfdocument |
294 | |
f6d6199c |
295 | ]; |
f1387719 |
296 | |
297 | # Postamble needs to be the last that was always the case |
298 | push @MM_Sections, "postamble"; |
299 | push @Overridable, "postamble"; |
e05e23b1 |
300 | |
301 | # All sections are valid keys. |
3b03c0f3 |
302 | @Recognized_Att_Keys{@MM_Sections} = (1) x @MM_Sections; |
e05e23b1 |
303 | |
304 | # we will use all these variables in the Makefile |
305 | @Get_from_Config = |
f6d6199c |
306 | qw( |
2977d345 |
307 | ar cc cccdlflags ccdlflags dlext dlsrc exe_ext full_ar ld |
308 | lddlflags ldflags libc lib_ext obj_ext osname osvers ranlib |
309 | sitelibexp sitearchexp so |
f6d6199c |
310 | ); |
e05e23b1 |
311 | |
479d2113 |
312 | # 5.5.3 doesn't have any concept of vendor libs |
313 | push @Get_from_Config, qw( vendorarchexp vendorlibexp ) if $] >= 5.006; |
314 | |
5e9e174b |
315 | foreach my $item (@attrib_help){ |
f6d6199c |
316 | $Recognized_Att_Keys{$item} = 1; |
e05e23b1 |
317 | } |
5e9e174b |
318 | foreach my $item (@Get_from_Config) { |
f6d6199c |
319 | $Recognized_Att_Keys{uc $item} = $Config{$item}; |
320 | print "Attribute '\U$item\E' => '$Config{$item}'\n" |
321 | if ($Verbose >= 2); |
e05e23b1 |
322 | } |
323 | |
324 | # |
3b03c0f3 |
325 | # When we eval a Makefile.PL in a subdirectory, that one will ask |
326 | # us (the parent) for the values and will prepend "..", so that |
327 | # all files to be installed end up below OUR ./blib |
e05e23b1 |
328 | # |
e0678a30 |
329 | @Prepend_parent = qw( |
330 | INST_BIN INST_LIB INST_ARCHLIB INST_SCRIPT |
f6d6199c |
331 | MAP_TARGET INST_MAN1DIR INST_MAN3DIR PERL_SRC |
332 | PERL FULLPERL |
333 | ); |
e05e23b1 |
334 | } |
42793c05 |
335 | |
8e07c86e |
336 | sub writeMakefile { |
337 | die <<END; |
232e078e |
338 | |
8e07c86e |
339 | The extension you are trying to build apparently is rather old and |
340 | most probably outdated. We detect that from the fact, that a |
341 | subroutine "writeMakefile" is called, and this subroutine is not |
342 | supported anymore since about October 1994. |
40000a8c |
343 | |
4633a7c4 |
344 | Please contact the author or look into CPAN (details about CPAN can be |
345 | found in the FAQ and at http:/www.perl.com) for a more recent version |
346 | of the extension. If you're really desperate, you can try to change |
347 | the subroutine name from writeMakefile to WriteMakefile and rerun |
348 | 'perl Makefile.PL', but you're most probably left alone, when you do |
349 | so. |
42793c05 |
350 | |
8e07c86e |
351 | The MakeMaker team |
1aef975c |
352 | |
42793c05 |
353 | END |
8e07c86e |
354 | } |
42793c05 |
355 | |
f6d6199c |
356 | sub new { |
8e07c86e |
357 | my($class,$self) = @_; |
358 | my($key); |
42793c05 |
359 | |
479d2113 |
360 | # Store the original args passed to WriteMakefile() |
361 | foreach my $k (keys %$self) { |
362 | $self->{ARGS}{$k} = $self->{$k}; |
363 | } |
364 | |
88d69b28 |
365 | if ("@ARGV" =~ /\bPREREQ_PRINT\b/) { |
f6d6199c |
366 | require Data::Dumper; |
88d69b28 |
367 | print Data::Dumper->Dump([$self->{PREREQ_PM}], [qw(PREREQ_PM)]); |
919b8535 |
368 | exit 0; |
f6d6199c |
369 | } |
88d69b28 |
370 | |
371 | # PRINT_PREREQ is RedHatism. |
372 | if ("@ARGV" =~ /\bPRINT_PREREQ\b/) { |
2c91f887 |
373 | print join(" ", map { "perl($_)>=$self->{PREREQ_PM}->{$_} " } |
374 | sort keys %{$self->{PREREQ_PM}}), "\n"; |
f6d6199c |
375 | exit 0; |
88d69b28 |
376 | } |
377 | |
e05e23b1 |
378 | print STDOUT "MakeMaker (v$VERSION)\n" if $Verbose; |
8e07c86e |
379 | if (-f "MANIFEST" && ! -f "Makefile"){ |
f6d6199c |
380 | check_manifest(); |
1aef975c |
381 | } |
42793c05 |
382 | |
8e07c86e |
383 | $self = {} unless (defined $self); |
005c1a0e |
384 | |
864a5fa8 |
385 | check_hints($self); |
4633a7c4 |
386 | |
c3be8c6e |
387 | my %configure_att; # record &{$self->{CONFIGURE}} attributes |
8e07c86e |
388 | my(%initial_att) = %$self; # record initial attributes |
005c1a0e |
389 | |
a4260cbc |
390 | my(%unsatisfied) = (); |
5e9e174b |
391 | foreach my $prereq (sort keys %{$self->{PREREQ_PM}}) { |
479d2113 |
392 | # 5.8.0 has a bug with require Foo::Bar alone in an eval, so an |
393 | # extra statement is a workaround. |
a7d1454b |
394 | my $file = "$prereq.pm"; |
395 | $file =~ s{::}{/}g; |
396 | eval { require $file }; |
f6d6199c |
397 | |
e0678a30 |
398 | my $pr_version = $prereq->VERSION || 0; |
399 | |
479d2113 |
400 | # convert X.Y_Z alpha version #s to X.YZ for easier comparisons |
401 | $pr_version =~ s/(\d+)\.(\d+)_(\d+)/$1.$2$3/; |
402 | |
f6d6199c |
403 | if ($@) { |
404 | warn sprintf "Warning: prerequisite %s %s not found.\n", |
405 | $prereq, $self->{PREREQ_PM}{$prereq} |
406 | unless $self->{PREREQ_FATAL}; |
407 | $unsatisfied{$prereq} = 'not installed'; |
e0678a30 |
408 | } elsif ($pr_version < $self->{PREREQ_PM}->{$prereq} ){ |
45bc4d3a |
409 | warn sprintf "Warning: prerequisite %s %s not found. We have %s.\n", |
f6d6199c |
410 | $prereq, $self->{PREREQ_PM}{$prereq}, |
e0678a30 |
411 | ($pr_version || 'unknown version') |
f6d6199c |
412 | unless $self->{PREREQ_FATAL}; |
413 | $unsatisfied{$prereq} = $self->{PREREQ_PM}->{$prereq} ? |
414 | $self->{PREREQ_PM}->{$prereq} : 'unknown version' ; |
415 | } |
f1387719 |
416 | } |
a4260cbc |
417 | if (%unsatisfied && $self->{PREREQ_FATAL}){ |
f6d6199c |
418 | my $failedprereqs = join ', ', map {"$_ $unsatisfied{$_}"} |
419 | keys %unsatisfied; |
420 | die qq{MakeMaker FATAL: prerequisites not found ($failedprereqs)\n |
421 | Please install these modules first and rerun 'perl Makefile.PL'.\n}; |
a4260cbc |
422 | } |
f1387719 |
423 | |
8e07c86e |
424 | if (defined $self->{CONFIGURE}) { |
f6d6199c |
425 | if (ref $self->{CONFIGURE} eq 'CODE') { |
426 | %configure_att = %{&{$self->{CONFIGURE}}}; |
427 | $self = { %$self, %configure_att }; |
428 | } else { |
429 | Carp::croak "Attribute 'CONFIGURE' to WriteMakefile() not a code reference\n"; |
430 | } |
005c1a0e |
431 | } |
a0d0e21e |
432 | |
8e07c86e |
433 | # This is for old Makefiles written pre 5.00, will go away |
434 | if ( Carp::longmess("") =~ /runsubdirpl/s ){ |
f6d6199c |
435 | Carp::carp("WARNING: Please rerun 'perl Makefile.PL' to regenerate your Makefiles\n"); |
8e07c86e |
436 | } |
5d94fbed |
437 | |
ccd13d1e |
438 | my $newclass = ++$PACKNAME; |
f6d6199c |
439 | local @Parent = @Parent; # Protect against non-local exits |
8e07c86e |
440 | { |
f6d6199c |
441 | no strict 'refs'; |
442 | print "Blessing Object into class [$newclass]\n" if $Verbose>=2; |
443 | mv_all_methods("MY",$newclass); |
444 | bless $self, $newclass; |
445 | push @Parent, $self; |
446 | require ExtUtils::MY; |
447 | @{"$newclass\:\:ISA"} = 'MM'; |
8e07c86e |
448 | } |
5d94fbed |
449 | |
e05e23b1 |
450 | if (defined $Parent[-2]){ |
f6d6199c |
451 | $self->{PARENT} = $Parent[-2]; |
452 | my $key; |
e0678a30 |
453 | for $key (@Prepend_parent) { |
f6d6199c |
454 | next unless defined $self->{PARENT}{$key}; |
531e2ba1 |
455 | |
456 | # Don't stomp on WriteMakefile() args. |
46442182 |
457 | next if defined $self->{ARGS}{$key} and |
458 | $self->{ARGS}{$key} eq $self->{$key}; |
459 | |
460 | $self->{$key} = $self->{PARENT}{$key}; |
531e2ba1 |
461 | |
479d2113 |
462 | unless ($Is_VMS && $key =~ /PERL$/) { |
f6d6199c |
463 | $self->{$key} = $self->catdir("..",$self->{$key}) |
464 | unless $self->file_name_is_absolute($self->{$key}); |
465 | } else { |
466 | # PERL or FULLPERL will be a command verb or even a |
467 | # command with an argument instead of a full file |
468 | # specification under VMS. So, don't turn the command |
469 | # into a filespec, but do add a level to the path of |
470 | # the argument if not already absolute. |
471 | my @cmd = split /\s+/, $self->{$key}; |
472 | $cmd[1] = $self->catfile('[-]',$cmd[1]) |
473 | unless (@cmd < 2) || $self->file_name_is_absolute($cmd[1]); |
474 | $self->{$key} = join(' ', @cmd); |
475 | } |
476 | } |
477 | if ($self->{PARENT}) { |
478 | $self->{PARENT}->{CHILDREN}->{$newclass} = $self; |
479 | foreach my $opt (qw(POLLUTE PERL_CORE)) { |
480 | if (exists $self->{PARENT}->{$opt} |
481 | and not exists $self->{$opt}) |
482 | { |
483 | # inherit, but only if already unspecified |
484 | $self->{$opt} = $self->{PARENT}->{$opt}; |
485 | } |
486 | } |
487 | } |
488 | my @fm = grep /^FIRST_MAKEFILE=/, @ARGV; |
489 | parse_args($self,@fm) if @fm; |
8e07c86e |
490 | } else { |
f6d6199c |
491 | parse_args($self,split(' ', $ENV{PERL_MM_OPT} || ''),@ARGV); |
8e07c86e |
492 | } |
a0d0e21e |
493 | |
8e07c86e |
494 | $self->{NAME} ||= $self->guess_name; |
a0d0e21e |
495 | |
8e07c86e |
496 | ($self->{NAME_SYM} = $self->{NAME}) =~ s/\W+/_/g; |
a0d0e21e |
497 | |
2977d345 |
498 | $self->init_MAKE; |
479d2113 |
499 | $self->init_main; |
500 | $self->init_VERSION; |
501 | $self->init_dist; |
502 | $self->init_INST; |
503 | $self->init_INSTALL; |
531e2ba1 |
504 | $self->init_DEST; |
479d2113 |
505 | $self->init_dirscan; |
2977d345 |
506 | $self->init_PM; |
507 | $self->init_MANPODS; |
479d2113 |
508 | $self->init_xs; |
509 | $self->init_PERL; |
510 | $self->init_DIRFILESEP; |
511 | $self->init_linker; |
2977d345 |
512 | $self->init_ABSTRACT; |
8e07c86e |
513 | |
0d8023a2 |
514 | if (! $self->{PERL_SRC} ) { |
f6d6199c |
515 | require VMS::Filespec if $Is_VMS; |
516 | my($pthinks) = $self->canonpath($INC{'Config.pm'}); |
517 | my($cthinks) = $self->catfile($Config{'archlibexp'},'Config.pm'); |
518 | $pthinks = VMS::Filespec::vmsify($pthinks) if $Is_VMS; |
519 | if ($pthinks ne $cthinks && |
520 | !($Is_Win32 and lc($pthinks) eq lc($cthinks))) { |
3e3baf6d |
521 | print "Have $pthinks expected $cthinks\n"; |
f6d6199c |
522 | if ($Is_Win32) { |
523 | $pthinks =~ s![/\\]Config\.pm$!!i; $pthinks =~ s!.*[/\\]!!; |
524 | } |
525 | else { |
526 | $pthinks =~ s!/Config\.pm$!!; $pthinks =~ s!.*/!!; |
527 | } |
528 | print STDOUT <<END unless $self->{UNINSTALLED_PERL}; |
529 | Your perl and your Config.pm seem to have different ideas about the |
530 | architecture they are running on. |
8e07c86e |
531 | Perl thinks: [$pthinks] |
e05e23b1 |
532 | Config says: [$Config{archname}] |
f6d6199c |
533 | This may or may not cause problems. Please check your installation of perl |
534 | if you have problems building this extension. |
005c1a0e |
535 | END |
f6d6199c |
536 | } |
005c1a0e |
537 | } |
538 | |
8e07c86e |
539 | $self->init_others(); |
479d2113 |
540 | $self->init_platform(); |
e0678a30 |
541 | $self->init_PERM(); |
6071deed |
542 | my($argv) = neatvalue(\@ARGV); |
543 | $argv =~ s/^\[/(/; |
544 | $argv =~ s/\]$/)/; |
75f92628 |
545 | |
8e07c86e |
546 | push @{$self->{RESULT}}, <<END; |
547 | # This Makefile is for the $self->{NAME} extension to perl. |
548 | # |
e05e23b1 |
549 | # It was generated automatically by MakeMaker version |
550 | # $VERSION (Revision: $Revision) from the contents of |
551 | # Makefile.PL. Don't edit this file, edit Makefile.PL instead. |
8e07c86e |
552 | # |
f6d6199c |
553 | # ANY CHANGES MADE HERE WILL BE LOST! |
8e07c86e |
554 | # |
6071deed |
555 | # MakeMaker ARGV: $argv |
556 | # |
8e07c86e |
557 | # MakeMaker Parameters: |
558 | END |
a0d0e21e |
559 | |
5e9e174b |
560 | foreach my $key (sort keys %initial_att){ |
479d2113 |
561 | next if $key eq 'ARGS'; |
562 | |
f6d6199c |
563 | my($v) = neatvalue($initial_att{$key}); |
564 | $v =~ s/(CODE|HASH|ARRAY|SCALAR)\([\dxa-f]+\)/$1\(...\)/; |
565 | $v =~ tr/\n/ /s; |
566 | push @{$self->{RESULT}}, "# $key => $v"; |
42793c05 |
567 | } |
c3be8c6e |
568 | undef %initial_att; # free memory |
569 | |
570 | if (defined $self->{CONFIGURE}) { |
571 | push @{$self->{RESULT}}, <<END; |
572 | |
573 | # MakeMaker 'CONFIGURE' Parameters: |
574 | END |
575 | if (scalar(keys %configure_att) > 0) { |
5e9e174b |
576 | foreach my $key (sort keys %configure_att){ |
479d2113 |
577 | next if $key eq 'ARGS'; |
c3be8c6e |
578 | my($v) = neatvalue($configure_att{$key}); |
579 | $v =~ s/(CODE|HASH|ARRAY|SCALAR)\([\dxa-f]+\)/$1\(...\)/; |
580 | $v =~ tr/\n/ /s; |
581 | push @{$self->{RESULT}}, "# $key => $v"; |
582 | } |
583 | } |
584 | else |
585 | { |
586 | push @{$self->{RESULT}}, "# no values returned"; |
587 | } |
588 | undef %configure_att; # free memory |
589 | } |
a0d0e21e |
590 | |
8e07c86e |
591 | # turn the SKIP array into a SKIPHASH hash |
592 | my (%skip,$skip); |
593 | for $skip (@{$self->{SKIP} || []}) { |
f6d6199c |
594 | $self->{SKIPHASH}{$skip} = 1; |
8e07c86e |
595 | } |
3b03c0f3 |
596 | delete $self->{SKIP}; # free memory |
597 | |
598 | if ($self->{PARENT}) { |
479d2113 |
599 | for (qw/install dist dist_basics dist_core distdir dist_test dist_ci/) { |
f6d6199c |
600 | $self->{SKIPHASH}{$_} = 1; |
601 | } |
3b03c0f3 |
602 | } |
42793c05 |
603 | |
8e07c86e |
604 | # We run all the subdirectories now. They don't have much to query |
605 | # from the parent, but the parent has to query them: if they need linking! |
8e07c86e |
606 | unless ($self->{NORECURS}) { |
f6d6199c |
607 | $self->eval_in_subdirs if @{$self->{DIR}}; |
42793c05 |
608 | } |
a0d0e21e |
609 | |
5e9e174b |
610 | foreach my $section ( @MM_Sections ){ |
479d2113 |
611 | # Support for new foo_target() methods. |
612 | my $method = $section; |
613 | $method .= '_target' unless $self->can($method); |
614 | |
f6d6199c |
615 | print "Processing Makefile '$section' section\n" if ($Verbose >= 2); |
616 | my($skipit) = $self->skipcheck($section); |
617 | if ($skipit){ |
618 | push @{$self->{RESULT}}, "\n# --- MakeMaker $section section $skipit."; |
619 | } else { |
620 | my(%a) = %{$self->{$section} || {}}; |
621 | push @{$self->{RESULT}}, "\n# --- MakeMaker $section section:"; |
622 | push @{$self->{RESULT}}, "# " . join ", ", %a if $Verbose && %a; |
479d2113 |
623 | push @{$self->{RESULT}}, $self->nicetext($self->$method( %a )); |
f6d6199c |
624 | } |
232e078e |
625 | } |
8e07c86e |
626 | |
e05e23b1 |
627 | push @{$self->{RESULT}}, "\n# End."; |
8e07c86e |
628 | |
e05e23b1 |
629 | $self; |
232e078e |
630 | } |
631 | |
1b171b8d |
632 | sub WriteEmptyMakefile { |
a8112c7f |
633 | Carp::croak "WriteEmptyMakefile: Need even number of args" if @_ % 2; |
a8112c7f |
634 | |
635 | my %att = @_; |
636 | my $self = MM->new(\%att); |
479d2113 |
637 | if (-f $self->{MAKEFILE_OLD}) { |
dedf98bc |
638 | _unlink($self->{MAKEFILE_OLD}) or |
639 | warn "unlink $self->{MAKEFILE_OLD}: $!"; |
479d2113 |
640 | } |
641 | if ( -f $self->{MAKEFILE} ) { |
dedf98bc |
642 | _rename($self->{MAKEFILE}, $self->{MAKEFILE_OLD}) or |
643 | warn "rename $self->{MAKEFILE} => $self->{MAKEFILE_OLD}: $!" |
a8112c7f |
644 | } |
57b1a898 |
645 | open MF, '>'.$self->{MAKEFILE} or die "open $self->{MAKEFILE} for write: $!"; |
a8112c7f |
646 | print MF <<'EOP'; |
1b171b8d |
647 | all: |
648 | |
649 | clean: |
650 | |
651 | install: |
652 | |
653 | makemakerdflt: |
654 | |
655 | test: |
656 | |
657 | EOP |
a8112c7f |
658 | close MF or die "close $self->{MAKEFILE} for write: $!"; |
1b171b8d |
659 | } |
660 | |
e05e23b1 |
661 | sub check_manifest { |
662 | print STDOUT "Checking if your kit is complete...\n"; |
3b03c0f3 |
663 | require ExtUtils::Manifest; |
5e9e174b |
664 | # avoid warning |
665 | $ExtUtils::Manifest::Quiet = $ExtUtils::Manifest::Quiet = 1; |
666 | my(@missed) = ExtUtils::Manifest::manicheck(); |
667 | if (@missed) { |
f6d6199c |
668 | print STDOUT "Warning: the following files are missing in your kit:\n"; |
669 | print "\t", join "\n\t", @missed; |
670 | print STDOUT "\n"; |
671 | print STDOUT "Please inform the author.\n"; |
8e07c86e |
672 | } else { |
f6d6199c |
673 | print STDOUT "Looks good\n"; |
8e07c86e |
674 | } |
8e07c86e |
675 | } |
676 | |
e05e23b1 |
677 | sub parse_args{ |
678 | my($self, @args) = @_; |
5e9e174b |
679 | foreach (@args) { |
f6d6199c |
680 | unless (m/(.*?)=(.*)/) { |
f6d6199c |
681 | ++$Verbose if m/^verb/; |
682 | next; |
683 | } |
684 | my($name, $value) = ($1, $2); |
685 | if ($value =~ m/^~(\w+)?/) { # tilde with optional username |
686 | $value =~ s [^~(\w*)] |
687 | [$1 ? |
688 | ((getpwnam($1))[7] || "~$1") : |
689 | (getpwuid($>))[7] |
690 | ]ex; |
691 | } |
479d2113 |
692 | |
693 | # Remember the original args passed it. It will be useful later. |
694 | $self->{ARGS}{uc $name} = $self->{uc $name} = $value; |
8e07c86e |
695 | } |
8e07c86e |
696 | |
e05e23b1 |
697 | # catch old-style 'potential_libs' and inform user how to 'upgrade' |
698 | if (defined $self->{potential_libs}){ |
f6d6199c |
699 | my($msg)="'potential_libs' => '$self->{potential_libs}' should be"; |
700 | if ($self->{potential_libs}){ |
701 | print STDOUT "$msg changed to:\n\t'LIBS' => ['$self->{potential_libs}']\n"; |
702 | } else { |
703 | print STDOUT "$msg deleted.\n"; |
704 | } |
705 | $self->{LIBS} = [$self->{potential_libs}]; |
706 | delete $self->{potential_libs}; |
8e07c86e |
707 | } |
e05e23b1 |
708 | # catch old-style 'ARMAYBE' and inform user how to 'upgrade' |
709 | if (defined $self->{ARMAYBE}){ |
f6d6199c |
710 | my($armaybe) = $self->{ARMAYBE}; |
711 | print STDOUT "ARMAYBE => '$armaybe' should be changed to:\n", |
712 | "\t'dynamic_lib' => {ARMAYBE => '$armaybe'}\n"; |
713 | my(%dl) = %{$self->{dynamic_lib} || {}}; |
714 | $self->{dynamic_lib} = { %dl, ARMAYBE => $armaybe}; |
715 | delete $self->{ARMAYBE}; |
8e07c86e |
716 | } |
e05e23b1 |
717 | if (defined $self->{LDTARGET}){ |
f6d6199c |
718 | print STDOUT "LDTARGET should be changed to LDFROM\n"; |
719 | $self->{LDFROM} = $self->{LDTARGET}; |
720 | delete $self->{LDTARGET}; |
8e07c86e |
721 | } |
e05e23b1 |
722 | # Turn a DIR argument on the command line into an array |
723 | if (defined $self->{DIR} && ref \$self->{DIR} eq 'SCALAR') { |
f6d6199c |
724 | # So they can choose from the command line, which extensions they want |
725 | # the grep enables them to have some colons too much in case they |
726 | # have to build a list with the shell |
727 | $self->{DIR} = [grep $_, split ":", $self->{DIR}]; |
8e07c86e |
728 | } |
f1387719 |
729 | # Turn a INCLUDE_EXT argument on the command line into an array |
730 | if (defined $self->{INCLUDE_EXT} && ref \$self->{INCLUDE_EXT} eq 'SCALAR') { |
f6d6199c |
731 | $self->{INCLUDE_EXT} = [grep $_, split '\s+', $self->{INCLUDE_EXT}]; |
f1387719 |
732 | } |
733 | # Turn a EXCLUDE_EXT argument on the command line into an array |
734 | if (defined $self->{EXCLUDE_EXT} && ref \$self->{EXCLUDE_EXT} eq 'SCALAR') { |
f6d6199c |
735 | $self->{EXCLUDE_EXT} = [grep $_, split '\s+', $self->{EXCLUDE_EXT}]; |
f1387719 |
736 | } |
5e9e174b |
737 | |
738 | foreach my $mmkey (sort keys %$self){ |
479d2113 |
739 | next if $mmkey eq 'ARGS'; |
f6d6199c |
740 | print STDOUT " $mmkey => ", neatvalue($self->{$mmkey}), "\n" if $Verbose; |
741 | print STDOUT "'$mmkey' is not a known MakeMaker parameter name.\n" |
742 | unless exists $Recognized_Att_Keys{$mmkey}; |
e05e23b1 |
743 | } |
f1387719 |
744 | $| = 1 if $Verbose; |
e05e23b1 |
745 | } |
8e07c86e |
746 | |
e05e23b1 |
747 | sub check_hints { |
748 | my($self) = @_; |
749 | # We allow extension-specific hints files. |
864a5fa8 |
750 | |
479d2113 |
751 | require File::Spec; |
752 | my $curdir = File::Spec->curdir; |
753 | |
754 | my $hint_dir = File::Spec->catdir($curdir, "hints"); |
755 | return unless -d $hint_dir; |
8e07c86e |
756 | |
e05e23b1 |
757 | # First we look for the best hintsfile we have |
f1387719 |
758 | my($hint)="${^O}_$Config{osvers}"; |
e05e23b1 |
759 | $hint =~ s/\./_/g; |
760 | $hint =~ s/_$//; |
761 | return unless $hint; |
fed7345c |
762 | |
e05e23b1 |
763 | # Also try without trailing minor version numbers. |
764 | while (1) { |
479d2113 |
765 | last if -f File::Spec->catfile($hint_dir, "$hint.pl"); # found |
e05e23b1 |
766 | } continue { |
f6d6199c |
767 | last unless $hint =~ s/_[^_]*$//; # nothing to cut off |
e05e23b1 |
768 | } |
479d2113 |
769 | my $hint_file = File::Spec->catfile($hint_dir, "$hint.pl"); |
6626a13a |
770 | |
771 | return unless -f $hint_file; # really there |
fed7345c |
772 | |
f6d6199c |
773 | _run_hintfile($self, $hint_file); |
774 | } |
775 | |
776 | sub _run_hintfile { |
57b1a898 |
777 | no strict 'vars'; |
f6d6199c |
778 | local($self) = shift; # make $self available to the hint file. |
779 | my($hint_file) = shift; |
780 | |
479d2113 |
781 | local($@, $!); |
39234879 |
782 | print STDERR "Processing hints file $hint_file\n"; |
479d2113 |
783 | |
784 | # Just in case the ./ isn't on the hint file, which File::Spec can |
785 | # often strip off, we bung the curdir into @INC |
786 | local @INC = (File::Spec->curdir, @INC); |
787 | my $ret = do $hint_file; |
788 | if( !defined $ret ) { |
789 | my $error = $@ || $!; |
790 | print STDERR $error; |
75e2e551 |
791 | } |
e05e23b1 |
792 | } |
8e07c86e |
793 | |
e05e23b1 |
794 | sub mv_all_methods { |
795 | my($from,$to) = @_; |
5e9e174b |
796 | no strict 'refs'; |
e05e23b1 |
797 | my($symtab) = \%{"${from}::"}; |
fed7345c |
798 | |
e05e23b1 |
799 | # Here you see the *current* list of methods that are overridable |
800 | # from Makefile.PL via MY:: subroutines. As of VERSION 5.07 I'm |
801 | # still trying to reduce the list to some reasonable minimum -- |
802 | # because I want to make it easier for the user. A.K. |
40000a8c |
803 | |
57b1a898 |
804 | local $SIG{__WARN__} = sub { |
805 | # can't use 'no warnings redefined', 5.6 only |
806 | warn @_ unless $_[0] =~ /^Subroutine .* redefined/ |
807 | }; |
5e9e174b |
808 | foreach my $method (@Overridable) { |
fed7345c |
809 | |
f6d6199c |
810 | # We cannot say "next" here. Nick might call MY->makeaperl |
811 | # which isn't defined right now |
812 | |
813 | # Above statement was written at 4.23 time when Tk-b8 was |
814 | # around. As Tk-b9 only builds with 5.002something and MM 5 is |
815 | # standard, we try to enable the next line again. It was |
816 | # commented out until MM 5.23 |
817 | |
818 | next unless defined &{"${from}::$method"}; |
fed7345c |
819 | |
f6d6199c |
820 | *{"${to}::$method"} = \&{"${from}::$method"}; |
3b03c0f3 |
821 | |
f6d6199c |
822 | # delete would do, if we were sure, nobody ever called |
823 | # MY->makeaperl directly |
fed7345c |
824 | |
f6d6199c |
825 | # delete $symtab->{$method}; |
8e07c86e |
826 | |
f6d6199c |
827 | # If we delete a method, then it will be undefined and cannot |
828 | # be called. But as long as we have Makefile.PLs that rely on |
829 | # %MY:: being intact, we have to fill the hole with an |
830 | # inheriting method: |
fed7345c |
831 | |
f6d6199c |
832 | eval "package MY; sub $method { shift->SUPER::$method(\@_); }"; |
5d94fbed |
833 | } |
834 | |
e05e23b1 |
835 | # We have to clean out %INC also, because the current directory is |
836 | # changed frequently and Graham Barr prefers to get his version |
837 | # out of a History.pl file which is "required" so woudn't get |
838 | # loaded again in another extension requiring a History.pl |
a0d0e21e |
839 | |
f1387719 |
840 | # With perl5.002_01 the deletion of entries in %INC caused Tk-b11 |
841 | # to core dump in the middle of a require statement. The required |
842 | # file was Tk/MMutil.pm. The consequence is, we have to be |
843 | # extremely careful when we try to give perl a reason to reload a |
844 | # library with same name. The workaround prefers to drop nothing |
845 | # from %INC and teach the writers not to use such libraries. |
846 | |
847 | # my $inc; |
848 | # foreach $inc (keys %INC) { |
f6d6199c |
849 | # #warn "***$inc*** deleted"; |
850 | # delete $INC{$inc}; |
f1387719 |
851 | # } |
8e07c86e |
852 | } |
853 | |
3b03c0f3 |
854 | sub skipcheck { |
8e07c86e |
855 | my($self) = shift; |
e05e23b1 |
856 | my($section) = @_; |
857 | if ($section eq 'dynamic') { |
f6d6199c |
858 | print STDOUT "Warning (non-fatal): Target 'dynamic' depends on targets ", |
859 | "in skipped section 'dynamic_bs'\n" |
e05e23b1 |
860 | if $self->{SKIPHASH}{dynamic_bs} && $Verbose; |
861 | print STDOUT "Warning (non-fatal): Target 'dynamic' depends on targets ", |
f6d6199c |
862 | "in skipped section 'dynamic_lib'\n" |
e05e23b1 |
863 | if $self->{SKIPHASH}{dynamic_lib} && $Verbose; |
8e07c86e |
864 | } |
e05e23b1 |
865 | if ($section eq 'dynamic_lib') { |
866 | print STDOUT "Warning (non-fatal): Target '\$(INST_DYNAMIC)' depends on ", |
f6d6199c |
867 | "targets in skipped section 'dynamic_bs'\n" |
e05e23b1 |
868 | if $self->{SKIPHASH}{dynamic_bs} && $Verbose; |
869 | } |
870 | if ($section eq 'static') { |
871 | print STDOUT "Warning (non-fatal): Target 'static' depends on targets ", |
f6d6199c |
872 | "in skipped section 'static_lib'\n" |
e05e23b1 |
873 | if $self->{SKIPHASH}{static_lib} && $Verbose; |
8e07c86e |
874 | } |
e05e23b1 |
875 | return 'skipped' if $self->{SKIPHASH}{$section}; |
876 | return ''; |
8e07c86e |
877 | } |
878 | |
e05e23b1 |
879 | sub flush { |
880 | my $self = shift; |
881 | my($chunk); |
3b03c0f3 |
882 | local *FH; |
e05e23b1 |
883 | print STDOUT "Writing $self->{MAKEFILE} for $self->{NAME}\n"; |
8e07c86e |
884 | |
e05e23b1 |
885 | unlink($self->{MAKEFILE}, "MakeMaker.tmp", $Is_VMS ? 'Descrip.MMS' : ''); |
3b03c0f3 |
886 | open(FH,">MakeMaker.tmp") or die "Unable to open MakeMaker.tmp: $!"; |
8e07c86e |
887 | |
e05e23b1 |
888 | for $chunk (@{$self->{RESULT}}) { |
f6d6199c |
889 | print FH "$chunk\n"; |
8e07c86e |
890 | } |
e05e23b1 |
891 | |
3b03c0f3 |
892 | close FH; |
e05e23b1 |
893 | my($finalname) = $self->{MAKEFILE}; |
479d2113 |
894 | _rename("MakeMaker.tmp", $finalname) or |
895 | warn "rename MakeMaker.tmp => $finalname: $!"; |
e05e23b1 |
896 | chmod 0644, $finalname unless $Is_VMS; |
3b03c0f3 |
897 | |
479d2113 |
898 | my %keep = map { ($_ => 1) } qw(NEEDS_LINKING HAS_LINK_CODE); |
899 | |
e0678a30 |
900 | if ($self->{PARENT} && !$self->{_KEEP_AFTER_FLUSH}) { |
f6d6199c |
901 | foreach (keys %$self) { # safe memory |
479d2113 |
902 | delete $self->{$_} unless $keep{$_}; |
f6d6199c |
903 | } |
3b03c0f3 |
904 | } |
905 | |
e05e23b1 |
906 | system("$Config::Config{eunicefix} $finalname") unless $Config::Config{eunicefix} eq ":"; |
40000a8c |
907 | } |
908 | |
479d2113 |
909 | |
910 | # This is a rename for OS's where the target must be unlinked first. |
911 | sub _rename { |
912 | my($src, $dest) = @_; |
913 | chmod 0666, $dest; |
914 | unlink $dest; |
915 | return rename $src, $dest; |
916 | } |
917 | |
dedf98bc |
918 | # This is an unlink for OS's where the target must be writable first. |
919 | sub _unlink { |
920 | my @files = @_; |
921 | chmod 0666, @files; |
922 | return unlink @files; |
923 | } |
924 | |
479d2113 |
925 | |
e05e23b1 |
926 | # The following mkbootstrap() is only for installations that are calling |
927 | # the pre-4.1 mkbootstrap() from their old Makefiles. This MakeMaker |
928 | # writes Makefiles, that use ExtUtils::Mkbootstrap directly. |
929 | sub mkbootstrap { |
930 | die <<END; |
931 | !!! Your Makefile has been built such a long time ago, !!! |
932 | !!! that is unlikely to work with current MakeMaker. !!! |
933 | !!! Please rebuild your Makefile !!! |
934 | END |
8e07c86e |
935 | } |
005c1a0e |
936 | |
e05e23b1 |
937 | # Ditto for mksymlists() as of MakeMaker 5.17 |
938 | sub mksymlists { |
939 | die <<END; |
940 | !!! Your Makefile has been built such a long time ago, !!! |
941 | !!! that is unlikely to work with current MakeMaker. !!! |
942 | !!! Please rebuild your Makefile !!! |
943 | END |
4633a7c4 |
944 | } |
945 | |
e05e23b1 |
946 | sub neatvalue { |
947 | my($v) = @_; |
948 | return "undef" unless defined $v; |
949 | my($t) = ref $v; |
950 | return "q[$v]" unless $t; |
951 | if ($t eq 'ARRAY') { |
f6d6199c |
952 | my(@m, @neat); |
953 | push @m, "["; |
954 | foreach my $elem (@$v) { |
955 | push @neat, "q[$elem]"; |
956 | } |
957 | push @m, join ", ", @neat; |
958 | push @m, "]"; |
959 | return join "", @m; |
e05e23b1 |
960 | } |
961 | return "$v" unless $t eq 'HASH'; |
962 | my(@m, $key, $val); |
3b03c0f3 |
963 | while (($key,$val) = each %$v){ |
f6d6199c |
964 | last unless defined $key; # cautious programming in case (undef,undef) is true |
965 | push(@m,"$key=>".neatvalue($val)) ; |
3b03c0f3 |
966 | } |
e05e23b1 |
967 | return "{ ".join(', ',@m)." }"; |
4e68a208 |
968 | } |
969 | |
e05e23b1 |
970 | sub selfdocument { |
971 | my($self) = @_; |
972 | my(@m); |
973 | if ($Verbose){ |
f6d6199c |
974 | push @m, "\n# Full list of MakeMaker attribute values:"; |
975 | foreach my $key (sort keys %$self){ |
976 | next if $key eq 'RESULT' || $key =~ /^[A-Z][a-z]/; |
977 | my($v) = neatvalue($self->{$key}); |
978 | $v =~ s/(CODE|HASH|ARRAY|SCALAR)\([\dxa-f]+\)/$1\(...\)/; |
979 | $v =~ tr/\n/ /s; |
980 | push @m, "# $key => $v"; |
981 | } |
e05e23b1 |
982 | } |
983 | join "\n", @m; |
984 | } |
4e68a208 |
985 | |
3b03c0f3 |
986 | 1; |
987 | |
988 | __END__ |
005c1a0e |
989 | |
990 | =head1 NAME |
991 | |
479d2113 |
992 | ExtUtils::MakeMaker - Create a module Makefile |
005c1a0e |
993 | |
994 | =head1 SYNOPSIS |
995 | |
e0678a30 |
996 | use ExtUtils::MakeMaker; |
005c1a0e |
997 | |
e0678a30 |
998 | WriteMakefile( ATTRIBUTE => VALUE [, ...] ); |
8e07c86e |
999 | |
005c1a0e |
1000 | =head1 DESCRIPTION |
1001 | |
1002 | This utility is designed to write a Makefile for an extension module |
1003 | from a Makefile.PL. It is based on the Makefile.SH model provided by |
1004 | Andy Dougherty and the perl5-porters. |
1005 | |
1006 | It splits the task of generating the Makefile into several subroutines |
1007 | that can be individually overridden. Each subroutine returns the text |
1008 | it wishes to have written to the Makefile. |
1009 | |
f1387719 |
1010 | MakeMaker is object oriented. Each directory below the current |
e0678a30 |
1011 | directory that contains a Makefile.PL is treated as a separate |
f1387719 |
1012 | object. This makes it possible to write an unlimited number of |
1013 | Makefiles with a single invocation of WriteMakefile(). |
8e07c86e |
1014 | |
f1387719 |
1015 | =head2 How To Write A Makefile.PL |
8e07c86e |
1016 | |
479d2113 |
1017 | See ExtUtils::MakeMaker::Tutorial. |
8e07c86e |
1018 | |
bab2b58e |
1019 | The long answer is the rest of the manpage :-) |
005c1a0e |
1020 | |
1021 | =head2 Default Makefile Behaviour |
1022 | |
f1387719 |
1023 | The generated Makefile enables the user of the extension to invoke |
005c1a0e |
1024 | |
1025 | perl Makefile.PL # optionally "perl Makefile.PL verbose" |
1026 | make |
8e07c86e |
1027 | make test # optionally set TEST_VERBOSE=1 |
1028 | make install # See below |
005c1a0e |
1029 | |
1030 | The Makefile to be produced may be altered by adding arguments of the |
e05e23b1 |
1031 | form C<KEY=VALUE>. E.g. |
005c1a0e |
1032 | |
58d32538 |
1033 | perl Makefile.PL INSTALL_BASE=~ |
005c1a0e |
1034 | |
1035 | Other interesting targets in the generated Makefile are |
1036 | |
1037 | make config # to check if the Makefile is up-to-date |
8e07c86e |
1038 | make clean # delete local temp files (Makefile gets renamed) |
1039 | make realclean # delete derived files (including ./blib) |
e05e23b1 |
1040 | make ci # check in all the files in the MANIFEST file |
005c1a0e |
1041 | make dist # see below the Distribution Support section |
1042 | |
e05e23b1 |
1043 | =head2 make test |
1044 | |
bab2b58e |
1045 | MakeMaker checks for the existence of a file named F<test.pl> in the |
d5d4ec93 |
1046 | current directory and if it exists it execute the script with the |
1047 | proper set of perl C<-I> options. |
e05e23b1 |
1048 | |
1049 | MakeMaker also checks for any files matching glob("t/*.t"). It will |
d5d4ec93 |
1050 | execute all matching files in alphabetical order via the |
1051 | L<Test::Harness> module with the C<-I> switches set correctly. |
1052 | |
1053 | If you'd like to see the raw output of your tests, set the |
1054 | C<TEST_VERBOSE> variable to true. |
1055 | |
1056 | make test TEST_VERBOSE=1 |
e05e23b1 |
1057 | |
bab2b58e |
1058 | =head2 make testdb |
1059 | |
1060 | A useful variation of the above is the target C<testdb>. It runs the |
1061 | test under the Perl debugger (see L<perldebug>). If the file |
1062 | F<test.pl> exists in the current directory, it is used for the test. |
1063 | |
d5d4ec93 |
1064 | If you want to debug some other testfile, set the C<TEST_FILE> variable |
bab2b58e |
1065 | thusly: |
1066 | |
1067 | make testdb TEST_FILE=t/mytest.t |
1068 | |
1069 | By default the debugger is called using C<-d> option to perl. If you |
d5d4ec93 |
1070 | want to specify some other option, set the C<TESTDB_SW> variable: |
bab2b58e |
1071 | |
1072 | make testdb TESTDB_SW=-Dx |
1073 | |
e05e23b1 |
1074 | =head2 make install |
005c1a0e |
1075 | |
8e07c86e |
1076 | make alone puts all relevant files into directories that are named by |
f6d6199c |
1077 | the macros INST_LIB, INST_ARCHLIB, INST_SCRIPT, INST_MAN1DIR and |
1078 | INST_MAN3DIR. All these default to something below ./blib if you are |
1079 | I<not> building below the perl source directory. If you I<are> |
1080 | building below the perl source, INST_LIB and INST_ARCHLIB default to |
1081 | ../../lib, and INST_SCRIPT is not defined. |
005c1a0e |
1082 | |
e05e23b1 |
1083 | The I<install> target of the generated Makefile copies the files found |
1084 | below each of the INST_* directories to their INSTALL* |
1085 | counterparts. Which counterparts are chosen depends on the setting of |
1086 | INSTALLDIRS according to the following table: |
005c1a0e |
1087 | |
f6d6199c |
1088 | INSTALLDIRS set to |
5c161494 |
1089 | perl site vendor |
e05e23b1 |
1090 | |
479d2113 |
1091 | PERLPREFIX SITEPREFIX VENDORPREFIX |
5c161494 |
1092 | INST_ARCHLIB INSTALLARCHLIB INSTALLSITEARCH INSTALLVENDORARCH |
1093 | INST_LIB INSTALLPRIVLIB INSTALLSITELIB INSTALLVENDORLIB |
1094 | INST_BIN INSTALLBIN INSTALLSITEBIN INSTALLVENDORBIN |
002b9267 |
1095 | INST_SCRIPT INSTALLSCRIPT INSTALLSITESCRIPT INSTALLVENDORSCRIPT |
5c161494 |
1096 | INST_MAN1DIR INSTALLMAN1DIR INSTALLSITEMAN1DIR INSTALLVENDORMAN1DIR |
1097 | INST_MAN3DIR INSTALLMAN3DIR INSTALLSITEMAN3DIR INSTALLVENDORMAN3DIR |
005c1a0e |
1098 | |
8e07c86e |
1099 | The INSTALL... macros in turn default to their %Config |
1100 | ($Config{installprivlib}, $Config{installarchlib}, etc.) counterparts. |
005c1a0e |
1101 | |
3b03c0f3 |
1102 | You can check the values of these variables on your system with |
1103 | |
bab2b58e |
1104 | perl '-V:install.*' |
3b03c0f3 |
1105 | |
f1387719 |
1106 | And to check the sequence in which the library directories are |
1107 | searched by perl, run |
005c1a0e |
1108 | |
f1387719 |
1109 | perl -le 'print join $/, @INC' |
005c1a0e |
1110 | |
a7d1454b |
1111 | Sometimes older versions of the module you're installing live in other |
1112 | directories in @INC. Because Perl loads the first version of a module it |
1113 | finds, not the newest, you might accidentally get one of these older |
1114 | versions even after installing a brand new version. To delete I<all other |
1115 | versions of the module you're installing> (not simply older ones) set the |
1116 | C<UNINST> variable. |
1117 | |
1118 | make install UNINST=1 |
1119 | |
005c1a0e |
1120 | |
58d32538 |
1121 | =head2 INSTALL_BASE |
1122 | |
1123 | INSTALL_BASE can be passed into Makefile.PL to change where your |
1124 | module will be installed. INSTALL_BASE is more like what everyone |
1125 | else calls "prefix" than PREFIX is. |
1126 | |
1127 | To have everything installed in your home directory, do the following. |
1128 | |
1129 | perl Makefile.PL INSTALL_BASE=~ |
1130 | |
1131 | Like PREFIX, it sets several INSTALL* attributes at once. Unlike |
1132 | PREFIX it is easy to predict where the module will end up. The |
1133 | installation pattern looks like this: |
1134 | |
1135 | INSTALLARCHLIB INSTALL_BASE/lib/perl5/$Config{archname} |
1136 | INSTALLPRIVLIB INSTALL_BASE/lib/perl5 |
1137 | INSTALLBIN INSTALL_BASE/bin |
1138 | INSTALLSCRIPT INSTALL_BASE/bin |
1139 | INSTALLMAN1DIR INSTALL_BASE/man/man1 |
1140 | INSTALLMAN3DIR INSTALL_BASE/man/man3 |
1141 | |
1142 | INSTALL_BASE in MakeMaker and C<--install_base> in Module::Build (as |
1143 | of 0.28) install to the same location. If you want MakeMaker and |
1144 | Module::Build to install to the same location simply set INSTALL_BASE |
1145 | and C<--install_base> to the same location. |
1146 | |
1147 | INSTALL_BASE was added in 6.31. |
1148 | |
1149 | |
bab2b58e |
1150 | =head2 PREFIX and LIB attribute |
1151 | |
1152 | PREFIX and LIB can be used to set several INSTALL* attributes in one |
58d32538 |
1153 | go. Here's an example for installing into your home directory. |
bab2b58e |
1154 | |
f6d6199c |
1155 | perl Makefile.PL PREFIX=~ |
005c1a0e |
1156 | |
f6d6199c |
1157 | This will install all files in the module under your home directory, |
1158 | with man pages and libraries going into an appropriate place (usually |
58d32538 |
1159 | ~/man and ~/lib). How the exact location is determined is complicated |
1160 | and depends on how your Perl was configured. INSTALL_BASE works more |
1161 | like what other build systems call "prefix" than PREFIX and we |
1162 | recommend you use that instead. |
bab2b58e |
1163 | |
1164 | Another way to specify many INSTALL directories with a single |
f6d6199c |
1165 | parameter is LIB. |
005c1a0e |
1166 | |
f6d6199c |
1167 | perl Makefile.PL LIB=~/lib |
005c1a0e |
1168 | |
f6d6199c |
1169 | This will install the module's architecture-independent files into |
1170 | ~/lib, the architecture-dependent files into ~/lib/$archname. |
005c1a0e |
1171 | |
bab2b58e |
1172 | Note, that in both cases the tilde expansion is done by MakeMaker, not |
e35b8f9e |
1173 | by perl by default, nor by make. |
1174 | |
f6d6199c |
1175 | Conflicts between parameters LIB, PREFIX and the various INSTALL* |
1176 | arguments are resolved so that: |
e35b8f9e |
1177 | |
1178 | =over 4 |
1179 | |
1180 | =item * |
1181 | |
1182 | setting LIB overrides any setting of INSTALLPRIVLIB, INSTALLARCHLIB, |
1183 | INSTALLSITELIB, INSTALLSITEARCH (and they are not affected by PREFIX); |
1184 | |
1185 | =item * |
1186 | |
1187 | without LIB, setting PREFIX replaces the initial C<$Config{prefix}> |
1188 | part of those INSTALL* arguments, even if the latter are explicitly |
1189 | set (but are set to still start with C<$Config{prefix}>). |
1190 | |
1191 | =back |
005c1a0e |
1192 | |
f6d6199c |
1193 | If the user has superuser privileges, and is not working on AFS or |
1194 | relatives, then the defaults for INSTALLPRIVLIB, INSTALLARCHLIB, |
1195 | INSTALLSCRIPT, etc. will be appropriate, and this incantation will be |
1196 | the best: |
005c1a0e |
1197 | |
e0678a30 |
1198 | perl Makefile.PL; |
1199 | make; |
1200 | make test |
005c1a0e |
1201 | make install |
1202 | |
8e07c86e |
1203 | make install per default writes some documentation of what has been |
e05e23b1 |
1204 | done into the file C<$(INSTALLARCHLIB)/perllocal.pod>. This feature |
1205 | can be bypassed by calling make pure_install. |
8e07c86e |
1206 | |
1207 | =head2 AFS users |
1208 | |
1209 | will have to specify the installation directories as these most |
1210 | probably have changed since perl itself has been installed. They will |
1211 | have to do this by calling |
1212 | |
e05e23b1 |
1213 | perl Makefile.PL INSTALLSITELIB=/afs/here/today \ |
f6d6199c |
1214 | INSTALLSCRIPT=/afs/there/now INSTALLMAN3DIR=/afs/for/manpages |
8e07c86e |
1215 | make |
1216 | |
e05e23b1 |
1217 | Be careful to repeat this procedure every time you recompile an |
1218 | extension, unless you are sure the AFS installation directories are |
1219 | still valid. |
005c1a0e |
1220 | |
8e07c86e |
1221 | =head2 Static Linking of a new Perl Binary |
005c1a0e |
1222 | |
1223 | An extension that is built with the above steps is ready to use on |
1224 | systems supporting dynamic loading. On systems that do not support |
1225 | dynamic loading, any newly created extension has to be linked together |
1226 | with the available resources. MakeMaker supports the linking process |
1227 | by creating appropriate targets in the Makefile whenever an extension |
1228 | is built. You can invoke the corresponding section of the makefile with |
1229 | |
1230 | make perl |
1231 | |
1232 | That produces a new perl binary in the current directory with all |
da7f727a |
1233 | extensions linked in that can be found in INST_ARCHLIB, SITELIBEXP, |
e05e23b1 |
1234 | and PERL_ARCHLIB. To do that, MakeMaker writes a new Makefile, on |
1235 | UNIX, this is called Makefile.aperl (may be system dependent). If you |
1236 | want to force the creation of a new perl, it is recommended, that you |
1237 | delete this Makefile.aperl, so the directories are searched-through |
1238 | for linkable libraries again. |
005c1a0e |
1239 | |
1240 | The binary can be installed into the directory where perl normally |
1241 | resides on your machine with |
1242 | |
1243 | make inst_perl |
1244 | |
1245 | To produce a perl binary with a different name than C<perl>, either say |
1246 | |
1247 | perl Makefile.PL MAP_TARGET=myperl |
1248 | make myperl |
1249 | make inst_perl |
1250 | |
1251 | or say |
1252 | |
1253 | perl Makefile.PL |
1254 | make myperl MAP_TARGET=myperl |
1255 | make inst_perl MAP_TARGET=myperl |
1256 | |
1257 | In any case you will be prompted with the correct invocation of the |
1258 | C<inst_perl> target that installs the new binary into INSTALLBIN. |
1259 | |
8e07c86e |
1260 | make inst_perl per default writes some documentation of what has been |
1261 | done into the file C<$(INSTALLARCHLIB)/perllocal.pod>. This |
1262 | can be bypassed by calling make pure_inst_perl. |
005c1a0e |
1263 | |
e05e23b1 |
1264 | Warning: the inst_perl: target will most probably overwrite your |
1265 | existing perl binary. Use with care! |
005c1a0e |
1266 | |
8e07c86e |
1267 | Sometimes you might want to build a statically linked perl although |
1268 | your system supports dynamic loading. In this case you may explicitly |
1269 | set the linktype with the invocation of the Makefile.PL or make: |
1270 | |
1271 | perl Makefile.PL LINKTYPE=static # recommended |
1272 | |
1273 | or |
1274 | |
1275 | make LINKTYPE=static # works on most systems |
1276 | |
005c1a0e |
1277 | =head2 Determination of Perl Library and Installation Locations |
1278 | |
1279 | MakeMaker needs to know, or to guess, where certain things are |
e05e23b1 |
1280 | located. Especially INST_LIB and INST_ARCHLIB (where to put the files |
1281 | during the make(1) run), PERL_LIB and PERL_ARCHLIB (where to read |
1282 | existing modules from), and PERL_INC (header files and C<libperl*.*>). |
005c1a0e |
1283 | |
1284 | Extensions may be built either using the contents of the perl source |
e05e23b1 |
1285 | directory tree or from the installed perl library. The recommended way |
1286 | is to build extensions after you have run 'make install' on perl |
1287 | itself. You can do that in any directory on your hard disk that is not |
1288 | below the perl source tree. The support for extensions below the ext |
1289 | directory of the perl distribution is only good for the standard |
1290 | extensions that come with perl. |
005c1a0e |
1291 | |
1292 | If an extension is being built below the C<ext/> directory of the perl |
e05e23b1 |
1293 | source then MakeMaker will set PERL_SRC automatically (e.g., |
1294 | C<../..>). If PERL_SRC is defined and the extension is recognized as |
1295 | a standard extension, then other variables default to the following: |
005c1a0e |
1296 | |
1297 | PERL_INC = PERL_SRC |
1298 | PERL_LIB = PERL_SRC/lib |
1299 | PERL_ARCHLIB = PERL_SRC/lib |
1300 | INST_LIB = PERL_LIB |
1301 | INST_ARCHLIB = PERL_ARCHLIB |
1302 | |
1303 | If an extension is being built away from the perl source then MakeMaker |
1304 | will leave PERL_SRC undefined and default to using the installed copy |
1305 | of the perl library. The other variables default to the following: |
1306 | |
e05e23b1 |
1307 | PERL_INC = $archlibexp/CORE |
1308 | PERL_LIB = $privlibexp |
1309 | PERL_ARCHLIB = $archlibexp |
1310 | INST_LIB = ./blib/lib |
1311 | INST_ARCHLIB = ./blib/arch |
005c1a0e |
1312 | |
1313 | If perl has not yet been installed then PERL_SRC can be defined on the |
1314 | command line as shown in the previous section. |
1315 | |
005c1a0e |
1316 | |
f1387719 |
1317 | =head2 Which architecture dependent directory? |
005c1a0e |
1318 | |
f1387719 |
1319 | If you don't want to keep the defaults for the INSTALL* macros, |
1320 | MakeMaker helps you to minimize the typing needed: the usual |
1321 | relationship between INSTALLPRIVLIB and INSTALLARCHLIB is determined |
1322 | by Configure at perl compilation time. MakeMaker supports the user who |
1323 | sets INSTALLPRIVLIB. If INSTALLPRIVLIB is set, but INSTALLARCHLIB not, |
1324 | then MakeMaker defaults the latter to be the same subdirectory of |
1325 | INSTALLPRIVLIB as Configure decided for the counterparts in %Config , |
1326 | otherwise it defaults to INSTALLPRIVLIB. The same relationship holds |
1327 | for INSTALLSITELIB and INSTALLSITEARCH. |
005c1a0e |
1328 | |
f1387719 |
1329 | MakeMaker gives you much more freedom than needed to configure |
1330 | internal variables and get different results. It is worth to mention, |
1331 | that make(1) also lets you configure most of the variables that are |
1332 | used in the Makefile. But in the majority of situations this will not |
a7665c5e |
1333 | be necessary, and should only be done if the author of a package |
f1387719 |
1334 | recommends it (or you know what you're doing). |
005c1a0e |
1335 | |
e05e23b1 |
1336 | =head2 Using Attributes and Parameters |
005c1a0e |
1337 | |
a884ca7c |
1338 | The following attributes may be specified as arguments to WriteMakefile() |
1339 | or as NAME=VALUE pairs on the command line. |
005c1a0e |
1340 | |
875fa795 |
1341 | =over 2 |
005c1a0e |
1342 | |
875fa795 |
1343 | =item ABSTRACT |
1344 | |
1345 | One line description of the module. Will be included in PPD file. |
1346 | |
1347 | =item ABSTRACT_FROM |
1348 | |
1349 | Name of the file that contains the package description. MakeMaker looks |
1350 | for a line in the POD matching /^($package\s-\s)(.*)/. This is typically |
1351 | the first line in the "=head1 NAME" section. $2 becomes the abstract. |
1352 | |
e35b8f9e |
1353 | =item AUTHOR |
1354 | |
1355 | String containing name (and email address) of package author(s). Is used |
1356 | in PPD (Perl Package Description) files for PPM (Perl Package Manager). |
1357 | |
875fa795 |
1358 | =item BINARY_LOCATION |
1359 | |
1360 | Used when creating PPD files for binary packages. It can be set to a |
1361 | full or relative path or URL to the binary archive for a particular |
1362 | architecture. For example: |
1363 | |
f6d6199c |
1364 | perl Makefile.PL BINARY_LOCATION=x86/Agent.tar.gz |
875fa795 |
1365 | |
1366 | builds a PPD package that references a binary of the C<Agent> package, |
20e08411 |
1367 | located in the C<x86> directory relative to the PPD itself. |
8e07c86e |
1368 | |
864a5fa8 |
1369 | =item C |
8e07c86e |
1370 | |
864a5fa8 |
1371 | Ref to array of *.c file names. Initialised from a directory scan |
1372 | and the values portion of the XS attribute hash. This is not |
1373 | currently used by MakeMaker but may be handy in Makefile.PLs. |
8e07c86e |
1374 | |
84902520 |
1375 | =item CCFLAGS |
1376 | |
1377 | String that will be included in the compiler call command line between |
1378 | the arguments INC and OPTIMIZE. |
1379 | |
864a5fa8 |
1380 | =item CONFIG |
8e07c86e |
1381 | |
864a5fa8 |
1382 | Arrayref. E.g. [qw(archname manext)] defines ARCHNAME & MANEXT from |
1383 | config.sh. MakeMaker will add to CONFIG the following values anyway: |
1384 | ar |
1385 | cc |
1386 | cccdlflags |
1387 | ccdlflags |
1388 | dlext |
1389 | dlsrc |
1390 | ld |
1391 | lddlflags |
1392 | ldflags |
1393 | libc |
1394 | lib_ext |
1395 | obj_ext |
1396 | ranlib |
e05e23b1 |
1397 | sitelibexp |
1398 | sitearchexp |
864a5fa8 |
1399 | so |
8e07c86e |
1400 | |
1401 | =item CONFIGURE |
1402 | |
e05e23b1 |
1403 | CODE reference. The subroutine should return a hash reference. The |
1fef88e7 |
1404 | hash may contain further attributes, e.g. {LIBS =E<gt> ...}, that have to |
8e07c86e |
1405 | be determined by some evaluation method. |
1406 | |
864a5fa8 |
1407 | =item DEFINE |
8e07c86e |
1408 | |
864a5fa8 |
1409 | Something like C<"-DHAVE_UNISTD_H"> |
8e07c86e |
1410 | |
479d2113 |
1411 | =item DESTDIR |
1412 | |
1413 | This is the root directory into which the code will be installed. It |
1414 | I<prepends itself to the normal prefix>. For example, if your code |
5dca256e |
1415 | would normally go into F</usr/local/lib/perl> you could set DESTDIR=~/tmp/ |
1416 | and installation would go into F<~/tmp/usr/local/lib/perl>. |
479d2113 |
1417 | |
1418 | This is primarily of use for people who repackage Perl modules. |
1419 | |
531e2ba1 |
1420 | NOTE: Due to the nature of make, it is important that you put the trailing |
5dca256e |
1421 | slash on your DESTDIR. F<~/tmp/> not F<~/tmp>. |
479d2113 |
1422 | |
864a5fa8 |
1423 | =item DIR |
8e07c86e |
1424 | |
864a5fa8 |
1425 | Ref to array of subdirectories containing Makefile.PLs e.g. [ 'sdbm' |
1426 | ] in ext/SDBM_File |
8e07c86e |
1427 | |
864a5fa8 |
1428 | =item DISTNAME |
8e07c86e |
1429 | |
479d2113 |
1430 | A safe filename for the package. |
1431 | |
1432 | Defaults to NAME above but with :: replaced with -. |
1433 | |
1434 | For example, Foo::Bar becomes Foo-Bar. |
1435 | |
1436 | =item DISTVNAME |
1437 | |
1438 | Your name for distributing the package with the version number |
1439 | included. This is used by 'make dist' to name the resulting archive |
1440 | file. |
1441 | |
1442 | Defaults to DISTNAME-VERSION. |
1443 | |
1444 | For example, version 1.04 of Foo::Bar becomes Foo-Bar-1.04. |
1445 | |
1446 | On some OS's where . has special meaning VERSION_SYM may be used in |
1447 | place of VERSION. |
8e07c86e |
1448 | |
864a5fa8 |
1449 | =item DL_FUNCS |
8e07c86e |
1450 | |
875fa795 |
1451 | Hashref of symbol names for routines to be made available as universal |
1452 | symbols. Each key/value pair consists of the package name and an |
1453 | array of routine names in that package. Used only under AIX, OS/2, |
1454 | VMS and Win32 at present. The routine names supplied will be expanded |
1455 | in the same way as XSUB names are expanded by the XS() macro. |
1456 | Defaults to |
8e07c86e |
1457 | |
864a5fa8 |
1458 | {"$(NAME)" => ["boot_$(NAME)" ] } |
8e07c86e |
1459 | |
864a5fa8 |
1460 | e.g. |
8e07c86e |
1461 | |
864a5fa8 |
1462 | {"RPC" => [qw( boot_rpcb rpcb_gettime getnetconfigent )], |
1463 | "NetconfigPtr" => [ 'DESTROY'] } |
8e07c86e |
1464 | |
875fa795 |
1465 | Please see the L<ExtUtils::Mksymlists> documentation for more information |
1466 | about the DL_FUNCS, DL_VARS and FUNCLIST attributes. |
1467 | |
864a5fa8 |
1468 | =item DL_VARS |
8e07c86e |
1469 | |
875fa795 |
1470 | Array of symbol names for variables to be made available as universal symbols. |
1471 | Used only under AIX, OS/2, VMS and Win32 at present. Defaults to []. |
1472 | (e.g. [ qw(Foo_version Foo_numstreams Foo_tree ) ]) |
8e07c86e |
1473 | |
f1387719 |
1474 | =item EXCLUDE_EXT |
1475 | |
1476 | Array of extension names to exclude when doing a static build. This |
1477 | is ignored if INCLUDE_EXT is present. Consult INCLUDE_EXT for more |
1478 | details. (e.g. [ qw( Socket POSIX ) ] ) |
1479 | |
1480 | This attribute may be most useful when specified as a string on the |
de592821 |
1481 | command line: perl Makefile.PL EXCLUDE_EXT='Socket Safe' |
f1387719 |
1482 | |
864a5fa8 |
1483 | =item EXE_FILES |
8e07c86e |
1484 | |
864a5fa8 |
1485 | Ref to array of executable files. The files will be copied to the |
f1387719 |
1486 | INST_SCRIPT directory. Make realclean will delete them from there |
864a5fa8 |
1487 | again. |
8e07c86e |
1488 | |
2530b651 |
1489 | If your executables start with something like #!perl or |
1490 | #!/usr/bin/perl MakeMaker will change this to the path of the perl |
1491 | 'Makefile.PL' was invoked with so the programs will be sure to run |
1492 | properly even if perl is not in /usr/bin/perl. |
1493 | |
864a5fa8 |
1494 | =item FIRST_MAKEFILE |
1495 | |
479d2113 |
1496 | The name of the Makefile to be produced. This is used for the second |
1497 | Makefile that will be produced for the MAP_TARGET. |
1498 | |
1499 | Defaults to 'Makefile' or 'Descrip.MMS' on VMS. |
1500 | |
1501 | (Note: we couldn't use MAKEFILE because dmake uses this for something |
1502 | else). |
864a5fa8 |
1503 | |
1504 | =item FULLPERL |
8e07c86e |
1505 | |
75e2e551 |
1506 | Perl binary able to run this extension, load XS modules, etc... |
1507 | |
1508 | =item FULLPERLRUN |
1509 | |
1510 | Like PERLRUN, except it uses FULLPERL. |
1511 | |
1512 | =item FULLPERLRUNINST |
1513 | |
1514 | Like PERLRUNINST, except it uses FULLPERL. |
864a5fa8 |
1515 | |
762efda7 |
1516 | =item FUNCLIST |
1517 | |
1518 | This provides an alternate means to specify function names to be |
1519 | exported from the extension. Its value is a reference to an |
1520 | array of function names to be exported by the extension. These |
1521 | names are passed through unaltered to the linker options file. |
1522 | |
864a5fa8 |
1523 | =item H |
1524 | |
1525 | Ref to array of *.h file names. Similar to C. |
1526 | |
84902520 |
1527 | =item IMPORTS |
1528 | |
875fa795 |
1529 | This attribute is used to specify names to be imported into the |
69ff8adf |
1530 | extension. Takes a hash ref. |
1531 | |
1532 | It is only used on OS/2 and Win32. |
84902520 |
1533 | |
864a5fa8 |
1534 | =item INC |
1535 | |
1536 | Include file dirs eg: C<"-I/usr/5include -I/path/to/inc"> |
1537 | |
f1387719 |
1538 | =item INCLUDE_EXT |
1539 | |
1540 | Array of extension names to be included when doing a static build. |
1541 | MakeMaker will normally build with all of the installed extensions when |
1542 | doing a static build, and that is usually the desired behavior. If |
1543 | INCLUDE_EXT is present then MakeMaker will build only with those extensions |
1544 | which are explicitly mentioned. (e.g. [ qw( Socket POSIX ) ]) |
1545 | |
1546 | It is not necessary to mention DynaLoader or the current extension when |
1547 | filling in INCLUDE_EXT. If the INCLUDE_EXT is mentioned but is empty then |
1548 | only DynaLoader and the current extension will be included in the build. |
1549 | |
1550 | This attribute may be most useful when specified as a string on the |
de592821 |
1551 | command line: perl Makefile.PL INCLUDE_EXT='POSIX Socket Devel::Peek' |
f1387719 |
1552 | |
864a5fa8 |
1553 | =item INSTALLARCHLIB |
1554 | |
e05e23b1 |
1555 | Used by 'make install', which copies files from INST_ARCHLIB to this |
1556 | directory if INSTALLDIRS is set to perl. |
864a5fa8 |
1557 | |
1558 | =item INSTALLBIN |
1559 | |
5c161494 |
1560 | Directory to install binary files (e.g. tkperl) into if |
1561 | INSTALLDIRS=perl. |
e05e23b1 |
1562 | |
1563 | =item INSTALLDIRS |
1564 | |
5c161494 |
1565 | Determines which of the sets of installation directories to choose: |
1566 | perl, site or vendor. Defaults to site. |
8e07c86e |
1567 | |
1568 | =item INSTALLMAN1DIR |
1569 | |
1570 | =item INSTALLMAN3DIR |
1571 | |
5c161494 |
1572 | These directories get the man pages at 'make install' time if |
1573 | INSTALLDIRS=perl. Defaults to $Config{installman*dir}. |
8e07c86e |
1574 | |
5c161494 |
1575 | If set to 'none', no man pages will be installed. |
e0678a30 |
1576 | |
864a5fa8 |
1577 | =item INSTALLPRIVLIB |
8e07c86e |
1578 | |
e05e23b1 |
1579 | Used by 'make install', which copies files from INST_LIB to this |
1580 | directory if INSTALLDIRS is set to perl. |
1581 | |
5c161494 |
1582 | Defaults to $Config{installprivlib}. |
1583 | |
f1387719 |
1584 | =item INSTALLSCRIPT |
1585 | |
1586 | Used by 'make install' which copies files from INST_SCRIPT to this |
002b9267 |
1587 | directory if INSTALLDIRS=perl. |
f1387719 |
1588 | |
875fa795 |
1589 | =item INSTALLSITEARCH |
e05e23b1 |
1590 | |
875fa795 |
1591 | Used by 'make install', which copies files from INST_ARCHLIB to this |
e05e23b1 |
1592 | directory if INSTALLDIRS is set to site (default). |
1593 | |
5c161494 |
1594 | =item INSTALLSITEBIN |
1595 | |
1596 | Used by 'make install', which copies files from INST_BIN to this |
1597 | directory if INSTALLDIRS is set to site (default). |
1598 | |
875fa795 |
1599 | =item INSTALLSITELIB |
e05e23b1 |
1600 | |
875fa795 |
1601 | Used by 'make install', which copies files from INST_LIB to this |
e05e23b1 |
1602 | directory if INSTALLDIRS is set to site (default). |
8e07c86e |
1603 | |
5c161494 |
1604 | =item INSTALLSITEMAN1DIR |
1605 | |
1606 | =item INSTALLSITEMAN3DIR |
1607 | |
1608 | These directories get the man pages at 'make install' time if |
1609 | INSTALLDIRS=site (default). Defaults to |
1610 | $(SITEPREFIX)/man/man$(MAN*EXT). |
1611 | |
1612 | If set to 'none', no man pages will be installed. |
1613 | |
002b9267 |
1614 | =item INSTALLSITESCRIPT |
1615 | |
1616 | Used by 'make install' which copies files from INST_SCRIPT to this |
1617 | directory if INSTALLDIRS is set to site (default). |
1618 | |
5c161494 |
1619 | =item INSTALLVENDORARCH |
1620 | |
1621 | Used by 'make install', which copies files from INST_ARCHLIB to this |
1622 | directory if INSTALLDIRS is set to vendor. |
1623 | |
1624 | =item INSTALLVENDORBIN |
1625 | |
1626 | Used by 'make install', which copies files from INST_BIN to this |
1627 | directory if INSTALLDIRS is set to vendor. |
1628 | |
1629 | =item INSTALLVENDORLIB |
1630 | |
1631 | Used by 'make install', which copies files from INST_LIB to this |
1632 | directory if INSTALLDIRS is set to vendor. |
1633 | |
1634 | =item INSTALLVENDORMAN1DIR |
1635 | |
1636 | =item INSTALLVENDORMAN3DIR |
1637 | |
1638 | These directories get the man pages at 'make install' time if |
1639 | INSTALLDIRS=vendor. Defaults to $(VENDORPREFIX)/man/man$(MAN*EXT). |
1640 | |
1641 | If set to 'none', no man pages will be installed. |
1642 | |
002b9267 |
1643 | =item INSTALLVENDORSCRIPT |
1644 | |
1645 | Used by 'make install' which copies files from INST_SCRIPT to this |
1646 | directory if INSTALLDIRS is set to is set to vendor. |
1647 | |
864a5fa8 |
1648 | =item INST_ARCHLIB |
8e07c86e |
1649 | |
864a5fa8 |
1650 | Same as INST_LIB for architecture dependent files. |
8e07c86e |
1651 | |
f1387719 |
1652 | =item INST_BIN |
1653 | |
1654 | Directory to put real binary files during 'make'. These will be copied |
1655 | to INSTALLBIN during 'make install' |
1656 | |
e35b8f9e |
1657 | =item INST_LIB |
1658 | |
1659 | Directory where we put library files of this extension while building |
1660 | it. |
1661 | |
864a5fa8 |
1662 | =item INST_MAN1DIR |
8e07c86e |
1663 | |
864a5fa8 |
1664 | Directory to hold the man pages at 'make' time |
8e07c86e |
1665 | |
864a5fa8 |
1666 | =item INST_MAN3DIR |
8e07c86e |
1667 | |
864a5fa8 |
1668 | Directory to hold the man pages at 'make' time |
8e07c86e |
1669 | |
f1387719 |
1670 | =item INST_SCRIPT |
1671 | |
1672 | Directory, where executable files should be installed during |
c3fed81c |
1673 | 'make'. Defaults to "./blib/script", just to have a dummy location during |
f1387719 |
1674 | testing. make install will copy the files in INST_SCRIPT to |
1675 | INSTALLSCRIPT. |
1676 | |
479d2113 |
1677 | =item LD |
1678 | |
1679 | Program to be used to link libraries for dynamic loading. |
1680 | |
1681 | Defaults to $Config{ld}. |
1682 | |
a884ca7c |
1683 | =item LDDLFLAGS |
1684 | |
1685 | Any special flags that might need to be passed to ld to create a |
1686 | shared library suitable for dynamic loading. It is up to the makefile |
1687 | to use it. (See L<Config/lddlflags>) |
1688 | |
1689 | Defaults to $Config{lddlflags}. |
1690 | |
864a5fa8 |
1691 | =item LDFROM |
8e07c86e |
1692 | |
69ff8adf |
1693 | Defaults to "$(OBJECT)" and is used in the ld command to specify |
864a5fa8 |
1694 | what files to link/load from (also see dynamic_lib below for how to |
1695 | specify ld flags) |
8e07c86e |
1696 | |
bab2b58e |
1697 | =item LIB |
1698 | |
e35b8f9e |
1699 | LIB should only be set at C<perl Makefile.PL> time but is allowed as a |
f6d6199c |
1700 | MakeMaker argument. It has the effect of setting both INSTALLPRIVLIB |
1701 | and INSTALLSITELIB to that value regardless any explicit setting of |
1702 | those arguments (or of PREFIX). INSTALLARCHLIB and INSTALLSITEARCH |
1703 | are set to the corresponding architecture subdirectory. |
bab2b58e |
1704 | |
762efda7 |
1705 | =item LIBPERL_A |
1706 | |
1707 | The filename of the perllibrary that will be used together with this |
1708 | extension. Defaults to libperl.a. |
1709 | |
8e07c86e |
1710 | =item LIBS |
1711 | |
1712 | An anonymous array of alternative library |
1713 | specifications to be searched for (in order) until |
864a5fa8 |
1714 | at least one library is found. E.g. |
8e07c86e |
1715 | |
1716 | 'LIBS' => ["-lgdbm", "-ldbm -lfoo", "-L/path -ldbm.nfs"] |
1717 | |
1718 | Mind, that any element of the array |
1719 | contains a complete set of arguments for the ld |
1720 | command. So do not specify |
1721 | |
1722 | 'LIBS' => ["-ltcl", "-ltk", "-lX11"] |
1723 | |
1724 | See ODBM_File/Makefile.PL for an example, where an array is needed. If |
1725 | you specify a scalar as in |
1726 | |
1727 | 'LIBS' => "-ltcl -ltk -lX11" |
1728 | |
1729 | MakeMaker will turn it into an array with one element. |
1730 | |
2977d345 |
1731 | =item LICENSE |
1732 | |
1733 | The licensing terms of your distribution. Generally its "perl" for the |
1734 | same license as Perl itself. |
1735 | |
1736 | See L<Module::Build::Authoring> for the list of options. |
1737 | |
1738 | Defaults to "unknown". |
1739 | |
864a5fa8 |
1740 | =item LINKTYPE |
8e07c86e |
1741 | |
e05e23b1 |
1742 | 'static' or 'dynamic' (default unless usedl=undef in |
1743 | config.sh). Should only be used to force static linking (also see |
864a5fa8 |
1744 | linkext below). |
8e07c86e |
1745 | |
2977d345 |
1746 | =item MAKE |
1747 | |
1748 | Variant of make you intend to run the generated Makefile with. This |
1749 | parameter lets Makefile.PL know what make quirks to account for when |
1750 | generating the Makefile. |
1751 | |
1752 | MakeMaker also honors the MAKE environment variable. This parameter |
1753 | takes precedent. |
1754 | |
1755 | Currently the only significant values are 'dmake' and 'nmake' for Windows |
1756 | users. |
1757 | |
1758 | Defaults to $Config{make}. |
1759 | |
864a5fa8 |
1760 | =item MAKEAPERL |
8e07c86e |
1761 | |
864a5fa8 |
1762 | Boolean which tells MakeMaker, that it should include the rules to |
1763 | make a perl. This is handled automatically as a switch by |
1764 | MakeMaker. The user normally does not need it. |
8e07c86e |
1765 | |
479d2113 |
1766 | =item MAKEFILE_OLD |
1767 | |
1768 | When 'make clean' or similar is run, the $(FIRST_MAKEFILE) will be |
1769 | backed up at this location. |
8e07c86e |
1770 | |
479d2113 |
1771 | Defaults to $(FIRST_MAKEFILE).old or $(FIRST_MAKEFILE)_old on VMS. |
8e07c86e |
1772 | |
864a5fa8 |
1773 | =item MAN1PODS |
8e07c86e |
1774 | |
864a5fa8 |
1775 | Hashref of pod-containing files. MakeMaker will default this to all |
1776 | EXE_FILES files that include POD directives. The files listed |
1777 | here will be converted to man pages and installed as was requested |
1778 | at Configure time. |
8e07c86e |
1779 | |
864a5fa8 |
1780 | =item MAN3PODS |
8e07c86e |
1781 | |
bfa2a9ad |
1782 | Hashref that assigns to *.pm and *.pod files the files into which the |
1783 | manpages are to be written. MakeMaker parses all *.pod and *.pm files |
1784 | for POD directives. Files that contain POD will be the default keys of |
1785 | the MAN3PODS hashref. These will then be converted to man pages during |
1786 | C<make> and will be installed during C<make install>. |
8e07c86e |
1787 | |
864a5fa8 |
1788 | =item MAP_TARGET |
8e07c86e |
1789 | |
864a5fa8 |
1790 | If it is intended, that a new perl binary be produced, this variable |
1791 | may hold a name for that binary. Defaults to perl |
8e07c86e |
1792 | |
864a5fa8 |
1793 | =item MYEXTLIB |
4633a7c4 |
1794 | |
864a5fa8 |
1795 | If the extension links to a library that it builds set this to the |
1796 | name of the library (see SDBM_File) |
4633a7c4 |
1797 | |
864a5fa8 |
1798 | =item NAME |
8e07c86e |
1799 | |
864a5fa8 |
1800 | Perl module name for this extension (DBD::Oracle). This will default |
1801 | to the directory name but should be explicitly defined in the |
1802 | Makefile.PL. |
8e07c86e |
1803 | |
864a5fa8 |
1804 | =item NEEDS_LINKING |
8e07c86e |
1805 | |
a7665c5e |
1806 | MakeMaker will figure out if an extension contains linkable code |
864a5fa8 |
1807 | anywhere down the directory tree, and will set this variable |
a7665c5e |
1808 | accordingly, but you can speed it up a very little bit if you define |
864a5fa8 |
1809 | this boolean variable yourself. |
8e07c86e |
1810 | |
e05e23b1 |
1811 | =item NOECHO |
1812 | |
479d2113 |
1813 | Command so make does not print the literal commands its running. |
1814 | |
1815 | By setting it to an empty string you can generate a Makefile that |
1816 | prints all commands. Mainly used in debugging MakeMaker itself. |
1817 | |
1818 | Defaults to C<@>. |
e05e23b1 |
1819 | |
864a5fa8 |
1820 | =item NORECURS |
8e07c86e |
1821 | |
e05e23b1 |
1822 | Boolean. Attribute to inhibit descending into subdirectories. |
8e07c86e |
1823 | |
1df8d179 |
1824 | =item NO_META |
1825 | |
1826 | When true, suppresses the generation and addition to the MANIFEST of |
1827 | the META.yml module meta-data file during 'make distdir'. |
1828 | |
1829 | Defaults to false. |
1830 | |
762efda7 |
1831 | =item NO_VC |
1832 | |
a7665c5e |
1833 | In general, any generated Makefile checks for the current version of |
762efda7 |
1834 | MakeMaker and the version the Makefile was built under. If NO_VC is |
1835 | set, the version check is neglected. Do not write this into your |
1836 | Makefile.PL, use it interactively instead. |
1837 | |
864a5fa8 |
1838 | =item OBJECT |
8e07c86e |
1839 | |
864a5fa8 |
1840 | List of object files, defaults to '$(BASEEXT)$(OBJ_EXT)', but can be a long |
1841 | string containing all object files, e.g. "tkpBind.o |
1842 | tkpButton.o tkpCanvas.o" |
8e07c86e |
1843 | |
e35b8f9e |
1844 | (Where BASEEXT is the last component of NAME, and OBJ_EXT is $Config{obj_ext}.) |
1845 | |
3b03c0f3 |
1846 | =item OPTIMIZE |
1847 | |
1848 | Defaults to C<-O>. Set it to C<-g> to turn debugging on. The flag is |
1849 | passed to subdirectory makes. |
1850 | |
864a5fa8 |
1851 | =item PERL |
8e07c86e |
1852 | |
864a5fa8 |
1853 | Perl binary for tasks that can be done by miniperl |
8e07c86e |
1854 | |
da7f727a |
1855 | =item PERL_CORE |
1856 | |
1857 | Set only when MakeMaker is building the extensions of the Perl core |
1858 | distribution. |
1859 | |
864a5fa8 |
1860 | =item PERLMAINCC |
005c1a0e |
1861 | |
864a5fa8 |
1862 | The call to the program that is able to compile perlmain.c. Defaults |
1863 | to $(CC). |
005c1a0e |
1864 | |
864a5fa8 |
1865 | =item PERL_ARCHLIB |
005c1a0e |
1866 | |
da7f727a |
1867 | Same as for PERL_LIB, but for architecture dependent files. |
1868 | |
1869 | Used only when MakeMaker is building the extensions of the Perl core |
1870 | distribution (because normally $(PERL_ARCHLIB) is automatically in @INC, |
1871 | and adding it would get in the way of PERL5LIB). |
8e07c86e |
1872 | |
864a5fa8 |
1873 | =item PERL_LIB |
8e07c86e |
1874 | |
864a5fa8 |
1875 | Directory containing the Perl library to use. |
8e07c86e |
1876 | |
da7f727a |
1877 | Used only when MakeMaker is building the extensions of the Perl core |
1878 | distribution (because normally $(PERL_LIB) is automatically in @INC, |
1879 | and adding it would get in the way of PERL5LIB). |
1880 | |
e35b8f9e |
1881 | =item PERL_MALLOC_OK |
1882 | |
1883 | defaults to 0. Should be set to TRUE if the extension can work with |
1884 | the memory allocation routines substituted by the Perl malloc() subsystem. |
1885 | This should be applicable to most extensions with exceptions of those |
1886 | |
1887 | =over 4 |
1888 | |
1889 | =item * |
1890 | |
1891 | with bugs in memory allocations which are caught by Perl's malloc(); |
1892 | |
1893 | =item * |
1894 | |
1895 | which interact with the memory allocator in other ways than via |
1896 | malloc(), realloc(), free(), calloc(), sbrk() and brk(); |
1897 | |
1898 | =item * |
1899 | |
1900 | which rely on special alignment which is not provided by Perl's malloc(). |
1901 | |
1902 | =back |
1903 | |
1904 | B<NOTE.> Negligence to set this flag in I<any one> of loaded extension |
1905 | nullifies many advantages of Perl's malloc(), such as better usage of |
1906 | system resources, error detection, memory usage reporting, catchable failure |
1907 | of memory allocations, etc. |
1908 | |
479d2113 |
1909 | =item PERLPREFIX |
1910 | |
1911 | Directory under which core modules are to be installed. |
1912 | |
1913 | Defaults to $Config{installprefixexp} falling back to |
1914 | $Config{installprefix}, $Config{prefixexp} or $Config{prefix} should |
1915 | $Config{installprefixexp} not exist. |
1916 | |
1917 | Overridden by PREFIX. |
1918 | |
da7f727a |
1919 | =item PERLRUN |
1920 | |
75e2e551 |
1921 | Use this instead of $(PERL) when you wish to run perl. It will set up |
1922 | extra necessary flags for you. |
f6d6199c |
1923 | |
ffbaec2a |
1924 | =item PERLRUNINST |
f6d6199c |
1925 | |
75e2e551 |
1926 | Use this instead of $(PERL) when you wish to run perl to work with |
1927 | modules. It will add things like -I$(INST_ARCH) and other necessary |
1928 | flags so perl can see the modules you're about to install. |
f6d6199c |
1929 | |
864a5fa8 |
1930 | =item PERL_SRC |
8e07c86e |
1931 | |
864a5fa8 |
1932 | Directory containing the Perl source code (use of this should be |
1933 | avoided, it may be undefined) |
8e07c86e |
1934 | |
2366100d |
1935 | =item PERM_RW |
1936 | |
de592821 |
1937 | Desired permission for read/writable files. Defaults to C<644>. |
2366100d |
1938 | See also L<MM_Unix/perm_rw>. |
1939 | |
1940 | =item PERM_RWX |
1941 | |
1942 | Desired permission for executable files. Defaults to C<755>. |
1943 | See also L<MM_Unix/perm_rwx>. |
1944 | |
864a5fa8 |
1945 | =item PL_FILES |
8e07c86e |
1946 | |
7292dc67 |
1947 | MakeMaker can run programs to generate files for you at build time. |
1948 | By default any file named *.PL (except Makefile.PL and Build.PL) in |
1949 | the top level directory will be assumed to be a Perl program and run |
1950 | passing its own basename in as an argument. For example... |
1951 | |
1952 | perl foo.PL foo |
1953 | |
1954 | This behavior can be overridden by supplying your own set of files to |
1955 | search. PL_FILES accepts a hash ref, the key being the file to run |
1956 | and the value is passed in as the first argument when the PL file is run. |
1957 | |
41e5fcb0 |
1958 | PL_FILES => {'bin/foobar.PL' => 'bin/foobar'} |
7292dc67 |
1959 | |
1960 | Would run bin/foobar.PL like this: |
1961 | |
1962 | perl bin/foobar.PL bin/foobar |
1963 | |
1964 | If multiple files from one program are desired an array ref can be used. |
1965 | |
41e5fcb0 |
1966 | PL_FILES => {'bin/foobar.PL' => [qw(bin/foobar1 bin/foobar2)]} |
8e07c86e |
1967 | |
7292dc67 |
1968 | In this case the program will be run multiple times using each target file. |
8e07c86e |
1969 | |
7292dc67 |
1970 | perl bin/foobar.PL bin/foobar1 |
1971 | perl bin/foobar.PL bin/foobar2 |
3aa35033 |
1972 | |
4325052d |
1973 | PL files are normally run B<after> pm_to_blib and include INST_LIB and |
1974 | INST_ARCH in its C<@INC> so the just built modules can be |
1975 | accessed... unless the PL file is making a module (or anything else in |
1976 | PM) in which case it is run B<before> pm_to_blib and does not include |
1977 | INST_LIB and INST_ARCH in its C<@INC>. This apparently odd behavior |
1978 | is there for backwards compatibility (and its somewhat DWIM). |
41e5fcb0 |
1979 | |
8e07c86e |
1980 | |
864a5fa8 |
1981 | =item PM |
8e07c86e |
1982 | |
864a5fa8 |
1983 | Hashref of .pm files and *.pl files to be installed. e.g. |
8e07c86e |
1984 | |
864a5fa8 |
1985 | {'name_of_file.pm' => '$(INST_LIBDIR)/install_as.pm'} |
8e07c86e |
1986 | |
a3cb178b |
1987 | By default this will include *.pm and *.pl and the files found in |
1988 | the PMLIBDIRS directories. Defining PM in the |
864a5fa8 |
1989 | Makefile.PL will override PMLIBDIRS. |
8e07c86e |
1990 | |
864a5fa8 |
1991 | =item PMLIBDIRS |
8e07c86e |
1992 | |
864a5fa8 |
1993 | Ref to array of subdirectories containing library files. Defaults to |
a3cb178b |
1994 | [ 'lib', $(BASEEXT) ]. The directories will be scanned and I<any> files |
864a5fa8 |
1995 | they contain will be installed in the corresponding location in the |
1996 | library. A libscan() method can be used to alter the behaviour. |
1997 | Defining PM in the Makefile.PL will override PMLIBDIRS. |
8e07c86e |
1998 | |
e35b8f9e |
1999 | (Where BASEEXT is the last component of NAME.) |
2000 | |
131aa089 |
2001 | =item PM_FILTER |
2002 | |
2003 | A filter program, in the traditional Unix sense (input from stdin, output |
2004 | to stdout) that is passed on each .pm file during the build (in the |
2005 | pm_to_blib() phase). It is empty by default, meaning no filtering is done. |
2006 | |
2007 | Great care is necessary when defining the command if quoting needs to be |
2008 | done. For instance, you would need to say: |
2009 | |
2010 | {'PM_FILTER' => 'grep -v \\"^\\#\\"'} |
2011 | |
3c4b39be |
2012 | to remove all the leading comments on the fly during the build. The |
131aa089 |
2013 | extra \\ are necessary, unfortunately, because this variable is interpolated |
2014 | within the context of a Perl program built on the command line, and double |
2015 | quotes are what is used with the -e switch to build that command line. The |
2016 | # is escaped for the Makefile, since what is going to be generated will then |
2017 | be: |
2018 | |
2019 | PM_FILTER = grep -v \"^\#\" |
2020 | |
2021 | Without the \\ before the #, we'd have the start of a Makefile comment, |
2022 | and the macro would be incorrectly defined. |
2023 | |
2aea4d40 |
2024 | =item POLLUTE |
2025 | |
2026 | Release 5.005 grandfathered old global symbol names by providing preprocessor |
a7665c5e |
2027 | macros for extension source compatibility. As of release 5.6, these |
2aea4d40 |
2028 | preprocessor definitions are not available by default. The POLLUTE flag |
2029 | specifies that the old names should still be defined: |
2030 | |
2031 | perl Makefile.PL POLLUTE=1 |
2032 | |
2033 | Please inform the module author if this is necessary to successfully install |
a7665c5e |
2034 | a module under 5.6 or later. |
2aea4d40 |
2035 | |
875fa795 |
2036 | =item PPM_INSTALL_EXEC |
2037 | |
20e08411 |
2038 | Name of the executable used to run C<PPM_INSTALL_SCRIPT> below. (e.g. perl) |
875fa795 |
2039 | |
2040 | =item PPM_INSTALL_SCRIPT |
2041 | |
2042 | Name of the script that gets executed by the Perl Package Manager after |
2043 | the installation of a package. |
2044 | |
864a5fa8 |
2045 | =item PREFIX |
8e07c86e |
2046 | |
f6d6199c |
2047 | This overrides all the default install locations. Man pages, |
2048 | libraries, scripts, etc... MakeMaker will try to make an educated |
2049 | guess about where to place things under the new PREFIX based on your |
2050 | Config defaults. Failing that, it will fall back to a structure |
2051 | which should be sensible for your platform. |
2052 | |
2053 | If you specify LIB or any INSTALL* variables they will not be effected |
2054 | by the PREFIX. |
a4260cbc |
2055 | |
b2340c53 |
2056 | =item PREREQ_FATAL |
2057 | |
2058 | Bool. If this parameter is true, failing to have the required modules |
2059 | (or the right versions thereof) will be fatal. perl Makefile.PL will die |
2060 | with the proper message. |
2061 | |
2062 | Note: see L<Test::Harness> for a shortcut for stopping tests early if |
2063 | you are missing dependencies. |
2064 | |
2065 | Do I<not> use this parameter for simple requirements, which could be resolved |
2066 | at a later time, e.g. after an unsuccessful B<make test> of your module. |
2067 | |
2068 | It is I<extremely> rare to have to use C<PREREQ_FATAL> at all! |
2069 | |
d5d4ec93 |
2070 | =item PREREQ_PM |
2071 | |
2072 | Hashref: Names of modules that need to be available to run this |
2073 | extension (e.g. Fcntl for SDBM_File) are the keys of the hash and the |
2074 | desired version is the value. If the required version number is 0, we |
2075 | only check if any version is installed already. |
2076 | |
88d69b28 |
2077 | =item PREREQ_PRINT |
2078 | |
2079 | Bool. If this parameter is true, the prerequisites will be printed to |
2c91f887 |
2080 | stdout and MakeMaker will exit. The output format is an evalable hash |
2081 | ref. |
88d69b28 |
2082 | |
2083 | $PREREQ_PM = { |
2084 | 'A::B' => Vers1, |
2085 | 'C::D' => Vers2, |
2086 | ... |
2087 | }; |
2088 | |
2089 | =item PRINT_PREREQ |
2090 | |
2091 | RedHatism for C<PREREQ_PRINT>. The output format is different, though: |
2092 | |
2093 | perl(A::B)>=Vers1 perl(C::D)>=Vers2 ... |
2094 | |
5c161494 |
2095 | =item SITEPREFIX |
2096 | |
479d2113 |
2097 | Like PERLPREFIX, but only for the site install locations. |
2098 | |
2099 | Defaults to $Config{siteprefixexp}. Perls prior to 5.6.0 didn't have |
2100 | an explicit siteprefix in the Config. In those cases |
2101 | $Config{installprefix} will be used. |
5c161494 |
2102 | |
479d2113 |
2103 | Overridable by PREFIX |
5c161494 |
2104 | |
bb68fe9e |
2105 | =item SIGN |
2106 | |
7292dc67 |
2107 | When true, perform the generation and addition to the MANIFEST of the |
2108 | SIGNATURE file in the distdir during 'make distdir', via 'cpansign |
2109 | -s'. |
bb68fe9e |
2110 | |
2111 | Note that you need to install the Module::Signature module to |
2112 | perform this operation. |
2113 | |
2114 | Defaults to false. |
2115 | |
864a5fa8 |
2116 | =item SKIP |
8e07c86e |
2117 | |
da7f727a |
2118 | Arrayref. E.g. [qw(name1 name2)] skip (do not write) sections of the |
a7665c5e |
2119 | Makefile. Caution! Do not use the SKIP attribute for the negligible |
2120 | speedup. It may seriously damage the resulting Makefile. Only use it |
f1387719 |
2121 | if you really need it. |
8e07c86e |
2122 | |
864a5fa8 |
2123 | =item TYPEMAPS |
8e07c86e |
2124 | |
864a5fa8 |
2125 | Ref to array of typemap file names. Use this when the typemaps are |
2126 | in some directory other than the current directory or when they are |
2127 | not named B<typemap>. The last typemap in the list takes |
2128 | precedence. A typemap in the current directory has highest |
2129 | precedence, even if it isn't listed in TYPEMAPS. The default system |
2130 | typemap has lowest precedence. |
8e07c86e |
2131 | |
5c161494 |
2132 | =item VENDORPREFIX |
2133 | |
479d2113 |
2134 | Like PERLPREFIX, but only for the vendor install locations. |
2135 | |
2136 | Defaults to $Config{vendorprefixexp}. |
5c161494 |
2137 | |
479d2113 |
2138 | Overridable by PREFIX |
5c161494 |
2139 | |
45bc4d3a |
2140 | =item VERBINST |
2141 | |
2142 | If true, make install will be verbose |
2143 | |
864a5fa8 |
2144 | =item VERSION |
8e07c86e |
2145 | |
864a5fa8 |
2146 | Your version number for distributing the package. This defaults to |
2147 | 0.1. |
8e07c86e |
2148 | |
0d8023a2 |
2149 | =item VERSION_FROM |
2150 | |
2151 | Instead of specifying the VERSION in the Makefile.PL you can let |
2152 | MakeMaker parse a file to determine the version number. The parsing |
2153 | routine requires that the file named by VERSION_FROM contains one |
2154 | single line to compute the version number. The first line in the file |
2155 | that contains the regular expression |
2156 | |
84902520 |
2157 | /([\$*])(([\w\:\']*)\bVERSION)\b.*\=/ |
0d8023a2 |
2158 | |
2159 | will be evaluated with eval() and the value of the named variable |
2160 | B<after> the eval() will be assigned to the VERSION attribute of the |
2161 | MakeMaker object. The following lines will be parsed o.k.: |
2162 | |
2163 | $VERSION = '1.00'; |
84902520 |
2164 | *VERSION = \'1.01'; |
562c8117 |
2165 | $VERSION = (q$Revision: 19606 $) =~ /(\d+)/g; |
0d8023a2 |
2166 | $FOO::VERSION = '1.10'; |
84902520 |
2167 | *FOO::VERSION = \'1.11'; |
f6d6199c |
2168 | our $VERSION = 1.2.3; # new for perl5.6.0 |
0d8023a2 |
2169 | |
2170 | but these will fail: |
2171 | |
2172 | my $VERSION = '1.01'; |
2173 | local $VERSION = '1.02'; |
2174 | local $FOO::VERSION = '1.30'; |
2175 | |
e35b8f9e |
2176 | (Putting C<my> or C<local> on the preceding line will work o.k.) |
2177 | |
84902520 |
2178 | The file named in VERSION_FROM is not added as a dependency to |
2179 | Makefile. This is not really correct, but it would be a major pain |
2180 | during development to have to rewrite the Makefile for any smallish |
2181 | change in that file. If you want to make sure that the Makefile |
2182 | contains the correct VERSION macro after any change of the file, you |
2183 | would have to do something like |
2184 | |
2185 | depend => { Makefile => '$(VERSION_FROM)' } |
2186 | |
2187 | See attribute C<depend> below. |
0d8023a2 |
2188 | |
479d2113 |
2189 | =item VERSION_SYM |
2190 | |
2191 | A sanitized VERSION with . replaced by _. For places where . has |
2192 | special meaning (some filesystems, RCS labels, etc...) |
2193 | |
864a5fa8 |
2194 | =item XS |
8e07c86e |
2195 | |
864a5fa8 |
2196 | Hashref of .xs files. MakeMaker will default this. e.g. |
8e07c86e |
2197 | |
864a5fa8 |
2198 | {'name_of_file.xs' => 'name_of_file.c'} |
8e07c86e |
2199 | |
864a5fa8 |
2200 | The .c files will automatically be included in the list of files |
2201 | deleted by a make clean. |
4633a7c4 |
2202 | |
864a5fa8 |
2203 | =item XSOPT |
8e07c86e |
2204 | |
864a5fa8 |
2205 | String of options to pass to xsubpp. This might include C<-C++> or |
2206 | C<-extern>. Do not include typemaps here; the TYPEMAP parameter exists for |
2207 | that purpose. |
8e07c86e |
2208 | |
864a5fa8 |
2209 | =item XSPROTOARG |
4633a7c4 |
2210 | |
4e68a208 |
2211 | May be set to an empty string, which is identical to C<-prototypes>, or |
864a5fa8 |
2212 | C<-noprototypes>. See the xsubpp documentation for details. MakeMaker |
4e68a208 |
2213 | defaults to the empty string. |
2214 | |
0d8023a2 |
2215 | =item XS_VERSION |
2216 | |
2217 | Your version number for the .xs file of this package. This defaults |
2218 | to the value of the VERSION attribute. |
2219 | |
8e07c86e |
2220 | =back |
2221 | |
2222 | =head2 Additional lowercase attributes |
2223 | |
2224 | can be used to pass parameters to the methods which implement that |
531e2ba1 |
2225 | part of the Makefile. Parameters are specified as a hash ref but are |
2226 | passed to the method as a hash. |
8e07c86e |
2227 | |
2228 | =over 2 |
2229 | |
864a5fa8 |
2230 | =item clean |
8e07c86e |
2231 | |
864a5fa8 |
2232 | {FILES => "*.xyz foo"} |
2233 | |
c07a80fd |
2234 | =item depend |
2235 | |
3c4b39be |
2236 | {ANY_TARGET => ANY_DEPENDENCY, ...} |
c07a80fd |
2237 | |
e35b8f9e |
2238 | (ANY_TARGET must not be given a double-colon rule by MakeMaker.) |
2239 | |
864a5fa8 |
2240 | =item dist |
2241 | |
5f8e730b |
2242 | {TARFLAGS => 'cvfF', COMPRESS => 'gzip', SUFFIX => '.gz', |
3b03c0f3 |
2243 | SHAR => 'shar -m', DIST_CP => 'ln', ZIP => '/bin/zip', |
f1387719 |
2244 | ZIPFLAGS => '-rl', DIST_DEFAULT => 'private tardist' } |
864a5fa8 |
2245 | |
2246 | If you specify COMPRESS, then SUFFIX should also be altered, as it is |
2247 | needed to tell make the target file of the compression. Setting |
2248 | DIST_CP to ln can be useful, if you need to preserve the timestamps on |
2249 | your files. DIST_CP can take the values 'cp', which copies the file, |
2250 | 'ln', which links the file, and 'best' which copies symbolic links and |
2251 | links the rest. Default is 'best'. |
2252 | |
2253 | =item dynamic_lib |
2254 | |
0d8023a2 |
2255 | {ARMAYBE => 'ar', OTHERLDFLAGS => '...', INST_DYNAMIC_DEP => '...'} |
8e07c86e |
2256 | |
8e07c86e |
2257 | =item linkext |
2258 | |
2259 | {LINKTYPE => 'static', 'dynamic' or ''} |
2260 | |
864a5fa8 |
2261 | NB: Extensions that have nothing but *.pm files had to say |
8e07c86e |
2262 | |
2263 | {LINKTYPE => ''} |
2264 | |
864a5fa8 |
2265 | with Pre-5.0 MakeMakers. Since version 5.00 of MakeMaker such a line |
a7665c5e |
2266 | can be deleted safely. MakeMaker recognizes when there's nothing to |
864a5fa8 |
2267 | be linked. |
8e07c86e |
2268 | |
864a5fa8 |
2269 | =item macro |
8e07c86e |
2270 | |
864a5fa8 |
2271 | {ANY_MACRO => ANY_VALUE, ...} |
8e07c86e |
2272 | |
531e2ba1 |
2273 | =item postamble |
2274 | |
2275 | Anything put here will be passed to MY::postamble() if you have one. |
2276 | |
8e07c86e |
2277 | =item realclean |
2278 | |
2279 | {FILES => '$(INST_ARCHAUTODIR)/*.xyz'} |
2280 | |
f2f614a6 |
2281 | =item test |
2282 | |
2283 | {TESTS => 't/*.t'} |
2284 | |
8e07c86e |
2285 | =item tool_autosplit |
2286 | |
f2f614a6 |
2287 | {MAXLEN => 8} |
005c1a0e |
2288 | |
2289 | =back |
2290 | |
2291 | =head2 Overriding MakeMaker Methods |
2292 | |
2293 | If you cannot achieve the desired Makefile behaviour by specifying |
2294 | attributes you may define private subroutines in the Makefile.PL. |
e0678a30 |
2295 | Each subroutine returns the text it wishes to have written to |
005c1a0e |
2296 | the Makefile. To override a section of the Makefile you can |
2297 | either say: |
2298 | |
f6d6199c |
2299 | sub MY::c_o { "new literal text" } |
005c1a0e |
2300 | |
2301 | or you can edit the default by saying something like: |
2302 | |
e0678a30 |
2303 | package MY; # so that "SUPER" works right |
2304 | sub c_o { |
f6d6199c |
2305 | my $inherited = shift->SUPER::c_o(@_); |
2306 | $inherited =~ s/old text/new text/; |
2307 | $inherited; |
2308 | } |
8e07c86e |
2309 | |
bdda3fbd |
2310 | If you are running experiments with embedding perl as a library into |
2311 | other applications, you might find MakeMaker is not sufficient. You'd |
2312 | better have a look at ExtUtils::Embed which is a collection of utilities |
2313 | for embedding. |
005c1a0e |
2314 | |
2315 | If you still need a different solution, try to develop another |
bdda3fbd |
2316 | subroutine that fits your needs and submit the diffs to |
a7d1454b |
2317 | C<makemaker@perl.org> |
005c1a0e |
2318 | |
e0678a30 |
2319 | For a complete description of all MakeMaker methods see |
2320 | L<ExtUtils::MM_Unix>. |
3b03c0f3 |
2321 | |
2322 | Here is a simple example of how to add a new target to the generated |
2323 | Makefile: |
2324 | |
2325 | sub MY::postamble { |
e0678a30 |
2326 | return <<'MAKE_FRAG'; |
3b03c0f3 |
2327 | $(MYEXTLIB): sdbm/Makefile |
f6d6199c |
2328 | cd sdbm && $(MAKE) all |
e0678a30 |
2329 | |
2330 | MAKE_FRAG |
3b03c0f3 |
2331 | } |
2332 | |
a884ca7c |
2333 | =head2 The End Of Cargo Cult Programming |
2334 | |
2335 | WriteMakefile() now does some basic sanity checks on its parameters to |
2336 | protect against typos and malformatted values. This means some things |
2337 | which happened to work in the past will now throw warnings and |
2338 | possibly produce internal errors. |
2339 | |
2340 | Some of the most common mistakes: |
2341 | |
2342 | =over 2 |
2343 | |
76ca89ed |
2344 | =item C<< MAN3PODS => ' ' >> |
a884ca7c |
2345 | |
3c4b39be |
2346 | This is commonly used to suppress the creation of man pages. MAN3PODS |
a884ca7c |
2347 | takes a hash ref not a string, but the above worked by accident in old |
2348 | versions of MakeMaker. |
2349 | |
76ca89ed |
2350 | The correct code is C<< MAN3PODS => { } >>. |
a884ca7c |
2351 | |
2352 | =back |
2353 | |
3b03c0f3 |
2354 | |
f1387719 |
2355 | =head2 Hintsfile support |
2356 | |
2357 | MakeMaker.pm uses the architecture specific information from |
2358 | Config.pm. In addition it evaluates architecture specific hints files |
2359 | in a C<hints/> directory. The hints files are expected to be named |
2360 | like their counterparts in C<PERL_SRC/hints>, but with an C<.pl> file |
2361 | name extension (eg. C<next_3_2.pl>). They are simply C<eval>ed by |
2362 | MakeMaker within the WriteMakefile() subroutine, and can be used to |
2363 | execute commands as well as to include special variables. The rules |
2364 | which hintsfile is chosen are the same as in Configure. |
2365 | |
2366 | The hintsfile is eval()ed immediately after the arguments given to |
2367 | WriteMakefile are stuffed into a hash reference $self but before this |
2368 | reference becomes blessed. So if you want to do the equivalent to |
2369 | override or create an attribute you would say something like |
2370 | |
2371 | $self->{LIBS} = ['-ldbm -lucb -lc']; |
2372 | |
005c1a0e |
2373 | =head2 Distribution Support |
2374 | |
2375 | For authors of extensions MakeMaker provides several Makefile |
2376 | targets. Most of the support comes from the ExtUtils::Manifest module, |
2377 | where additional documentation can be found. |
2378 | |
2379 | =over 4 |
2380 | |
2381 | =item make distcheck |
8e07c86e |
2382 | |
005c1a0e |
2383 | reports which files are below the build directory but not in the |
2384 | MANIFEST file and vice versa. (See ExtUtils::Manifest::fullcheck() for |
2385 | details) |
2386 | |
4633a7c4 |
2387 | =item make skipcheck |
2388 | |
2389 | reports which files are skipped due to the entries in the |
2390 | C<MANIFEST.SKIP> file (See ExtUtils::Manifest::skipcheck() for |
2391 | details) |
2392 | |
005c1a0e |
2393 | =item make distclean |
8e07c86e |
2394 | |
005c1a0e |
2395 | does a realclean first and then the distcheck. Note that this is not |
a7665c5e |
2396 | needed to build a new distribution as long as you are sure that the |
005c1a0e |
2397 | MANIFEST file is ok. |
2398 | |
2399 | =item make manifest |
8e07c86e |
2400 | |
005c1a0e |
2401 | rewrites the MANIFEST file, adding all remaining files found (See |
2402 | ExtUtils::Manifest::mkmanifest() for details) |
2403 | |
2404 | =item make distdir |
8e07c86e |
2405 | |
005c1a0e |
2406 | Copies all the files that are in the MANIFEST file to a newly created |
2407 | directory with the name C<$(DISTNAME)-$(VERSION)>. If that directory |
2408 | exists, it will be removed first. |
2409 | |
7292dc67 |
2410 | Additionally, it will create a META.yml module meta-data file in the |
2411 | distdir and add this to the distdir's MANFIEST. You can shut this |
2412 | behavior off with the NO_META flag. |
1df8d179 |
2413 | |
f6d6199c |
2414 | =item make disttest |
8e07c86e |
2415 | |
2416 | Makes a distdir first, and runs a C<perl Makefile.PL>, a make, and |
4633a7c4 |
2417 | a make test in that directory. |
8e07c86e |
2418 | |
005c1a0e |
2419 | =item make tardist |
8e07c86e |
2420 | |
3b03c0f3 |
2421 | First does a distdir. Then a command $(PREOP) which defaults to a null |
f1387719 |
2422 | command, followed by $(TOUNIX), which defaults to a null command under |
2423 | UNIX, and will convert files in distribution directory to UNIX format |
2424 | otherwise. Next it runs C<tar> on that directory into a tarfile and |
3b03c0f3 |
2425 | deletes the directory. Finishes with a command $(POSTOP) which |
2426 | defaults to a null command. |
005c1a0e |
2427 | |
2428 | =item make dist |
8e07c86e |
2429 | |
005c1a0e |
2430 | Defaults to $(DIST_DEFAULT) which in turn defaults to tardist. |
2431 | |
2432 | =item make uutardist |
8e07c86e |
2433 | |
005c1a0e |
2434 | Runs a tardist first and uuencodes the tarfile. |
2435 | |
2436 | =item make shdist |
8e07c86e |
2437 | |
3b03c0f3 |
2438 | First does a distdir. Then a command $(PREOP) which defaults to a null |
2439 | command. Next it runs C<shar> on that directory into a sharfile and |
2440 | deletes the intermediate directory again. Finishes with a command |
2441 | $(POSTOP) which defaults to a null command. Note: For shdist to work |
2442 | properly a C<shar> program that can handle directories is mandatory. |
2443 | |
2444 | =item make zipdist |
2445 | |
2446 | First does a distdir. Then a command $(PREOP) which defaults to a null |
2447 | command. Runs C<$(ZIP) $(ZIPFLAGS)> on that directory into a |
2448 | zipfile. Then deletes that directory. Finishes with a command |
2449 | $(POSTOP) which defaults to a null command. |
005c1a0e |
2450 | |
2451 | =item make ci |
8e07c86e |
2452 | |
2453 | Does a $(CI) and a $(RCS_LABEL) on all files in the MANIFEST file. |
2454 | |
2455 | =back |
005c1a0e |
2456 | |
2457 | Customization of the dist targets can be done by specifying a hash |
2458 | reference to the dist attribute of the WriteMakefile call. The |
2459 | following parameters are recognized: |
2460 | |
8e07c86e |
2461 | CI ('ci -u') |
5f8e730b |
2462 | COMPRESS ('gzip --best') |
005c1a0e |
2463 | POSTOP ('@ :') |
8e07c86e |
2464 | PREOP ('@ :') |
f1387719 |
2465 | TO_UNIX (depends on the system) |
8e07c86e |
2466 | RCS_LABEL ('rcs -q -Nv$(VERSION_SYM):') |
2467 | SHAR ('shar') |
5f8e730b |
2468 | SUFFIX ('.gz') |
8e07c86e |
2469 | TAR ('tar') |
2470 | TARFLAGS ('cvf') |
3b03c0f3 |
2471 | ZIP ('zip') |
2472 | ZIPFLAGS ('-r') |
005c1a0e |
2473 | |
2474 | An example: |
2475 | |
5f8e730b |
2476 | WriteMakefile( 'dist' => { COMPRESS=>"bzip2", SUFFIX=>".bz2" }) |
005c1a0e |
2477 | |
1df8d179 |
2478 | |
2479 | =head2 Module Meta-Data |
2480 | |
2481 | Long plaguing users of MakeMaker based modules has been the problem of |
2482 | getting basic information about the module out of the sources |
2483 | I<without> running the F<Makefile.PL> and doing a bunch of messy |
2484 | heuristics on the resulting F<Makefile>. To this end a simple module |
2485 | meta-data file has been introduced, F<META.yml>. |
2486 | |
2487 | F<META.yml> is a YAML document (see http://www.yaml.org) containing |
2488 | basic information about the module (name, version, prerequisites...) |
2489 | in an easy to read format. The format is developed and defined by the |
64964e6d |
2490 | Module::Build developers (see |
2491 | http://module-build.sourceforge.net/META-spec.html) |
1df8d179 |
2492 | |
2493 | MakeMaker will automatically generate a F<META.yml> file for you and |
2494 | add it to your F<MANIFEST> as part of the 'distdir' target (and thus |
2495 | the 'dist' target). This is intended to seamlessly and rapidly |
2496 | populate CPAN with module meta-data. If you wish to shut this feature |
2497 | off, set the C<NO_META> C<WriteMakefile()> flag to true. |
2498 | |
2499 | |
1b171b8d |
2500 | =head2 Disabling an extension |
2501 | |
2502 | If some events detected in F<Makefile.PL> imply that there is no way |
2503 | to create the Module, but this is a normal state of things, then you |
2504 | can create a F<Makefile> which does nothing, but succeeds on all the |
2505 | "usual" build targets. To do so, use |
2506 | |
2507 | ExtUtils::MakeMaker::WriteEmptyMakefile(); |
2508 | |
2509 | instead of WriteMakefile(). |
2510 | |
2511 | This may be useful if other modules expect this module to be I<built> |
2512 | OK, as opposed to I<work> OK (say, this system-dependent module builds |
2513 | in a subdirectory of some other distribution, or is listed as a |
2514 | dependency in a CPAN::Bundle, but the functionality is supported by |
2515 | different means on the current architecture). |
2516 | |
479d2113 |
2517 | =head2 Other Handy Functions |
2518 | |
2519 | =over 4 |
2520 | |
2521 | =item prompt |
2522 | |
2523 | my $value = prompt($message); |
2524 | my $value = prompt($message, $default); |
2525 | |
2526 | The C<prompt()> function provides an easy way to request user input |
2527 | used to write a makefile. It displays the $message as a prompt for |
2528 | input. If a $default is provided it will be used as a default. The |
2529 | function returns the $value selected by the user. |
2530 | |
2531 | If C<prompt()> detects that it is not running interactively and there |
2532 | is nothing on STDIN or if the PERL_MM_USE_DEFAULT environment variable |
2533 | is set to true, the $default will be used without prompting. This |
2534 | prevents automated processes from blocking on user input. |
2535 | |
2536 | If no $default is provided an empty string will be used instead. |
2537 | |
2538 | =back |
2539 | |
2540 | |
6ce21ffa |
2541 | =head1 ENVIRONMENT |
2542 | |
479d2113 |
2543 | =over 4 |
6ce21ffa |
2544 | |
2443aee5 |
2545 | =item PERL_MM_OPT |
6ce21ffa |
2546 | |
2547 | Command line options used by C<MakeMaker-E<gt>new()>, and thus by |
2548 | C<WriteMakefile()>. The string is split on whitespace, and the result |
2549 | is processed before any actual command line arguments are processed. |
2550 | |
9d05ba64 |
2551 | =item PERL_MM_USE_DEFAULT |
2552 | |
2553 | If set to a true value then MakeMaker's prompt function will |
2554 | always return the default without waiting for user input. |
2555 | |
41e5fcb0 |
2556 | =item PERL_CORE |
2557 | |
2558 | Same as the PERL_CORE parameter. The parameter overrides this. |
2559 | |
6ce21ffa |
2560 | =back |
2561 | |
f1387719 |
2562 | =head1 SEE ALSO |
2563 | |
562c8117 |
2564 | L<Module::Build> is a pure-Perl alternative to MakeMaker which does |
2565 | not rely on make or any other external utility. It is easier to |
2566 | extend to suit your needs. |
2567 | |
2568 | L<Module::Install> is a wrapper around MakeMaker which adds features |
2569 | not normally available. |
2570 | |
2571 | L<ExtUtils::ModuleMaker> and L<Module::Starter> are both modules to |
2572 | help you setup your distribution. |
005c1a0e |
2573 | |
e05e23b1 |
2574 | =head1 AUTHORS |
fed7345c |
2575 | |
a7d1454b |
2576 | Andy Dougherty C<doughera@lafayette.edu>, Andreas KE<ouml>nig |
2577 | C<andreas.koenig@mind.de>, Tim Bunce C<timb@cpan.org>. VMS |
2578 | support by Charles Bailey C<bailey@newman.upenn.edu>. OS/2 support |
2579 | by Ilya Zakharevich C<ilya@math.ohio-state.edu>. |
de90321e |
2580 | |
a7d1454b |
2581 | Currently maintained by Michael G Schwern C<schwern@pobox.com> |
f6d6199c |
2582 | |
a7d1454b |
2583 | Send patches and ideas to C<makemaker@perl.org>. |
e8012c20 |
2584 | |
e0678a30 |
2585 | Send bug reports via http://rt.cpan.org/. Please send your |
2586 | generated Makefile along with your report. |
2587 | |
a7d1454b |
2588 | For more up-to-date information, see L<http://www.makemaker.org>. |
fed7345c |
2589 | |
479d2113 |
2590 | =head1 LICENSE |
2591 | |
2592 | This program is free software; you can redistribute it and/or |
2593 | modify it under the same terms as Perl itself. |
2594 | |
a7d1454b |
2595 | See L<http://www.perl.com/perl/misc/Artistic.html> |
479d2113 |
2596 | |
2597 | |
005c1a0e |
2598 | =cut |